Search Results

Search found 4133 results on 166 pages for 'grant david bachman'.

Page 18/166 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Recommended CPU upgrade for Dell Vostro 220 with E7300 processor?

    - by Justin Grant
    I've got a Dell Vostro 220 with an E7300 processor (Intel Core 2 Duo @ 2.66Mhz, LGA775 socket) and I'm thinking about upgrading my processor so I can run Windows Server 2008 R2 with Hyper-V, which requires Hardware Virtualization support in the processor. Yes, I know this is underpowered for a server, I'm actually using it as a desktop machine but I'd like to use Hyper-V instead of Virtual Server (which I'm using now for running VMs). I'd like to keep the same motherboard and ideally the same CPU fan and RAM too. Any suggestions for a good, relatively cheap (under $200) processor upgrade?

    Read the article

  • mobile broadband recommendations for Lenovo T500

    - by Justin Grant
    I use a Lenovo T500 primarily in and around San Francisco, although I do some travel in the US on business and occasionally to Europe/Asia. I'm looking for a good mobile broadband option for my T500. I am admittedly baffled by the various mobile-broadband choices (3G vs. 4G, WiMax vs. LTE vs. MIMO vs. ..., etc.). My priorities are (in this order): Compatible with Lenovo T500 and Windows 7. I realize only the AT&T accessory card is listed on Lenovo's site, but I've also heard that other cards will work in my T500 too, like the WiMax/Wifi combo card-- so I'm interested in what actually works, not necessarily only what Lenovo is promoting. Reliable coverage in US large cities, especially the SF Bay Area. my IPhone has lousy coverage in many spots, so I'd be nervous about an AT&T 3G option unless the problem is with the IPhone and not AT&T's network. I'm OK with non-great coverage outside major US cities, since I don't do much travel in those areas. Speed. faster is better. Internal card. I'd slightly prefer something I could install inside my T500 instead of a dongle on the side that might break off, although this is my lowest priority so it's not a big deal. Price. I don't want to pay over $100/month. I've tried lots of Googling and haven't come up with clear answers. I've seen lots of general overviews without recommendations, and lots of passionate opinions which don't feel objective (and don't help me understand compatibility with my hardware & geography). Can you recommend a good, objective guide online, ideally for Lenovo although general guide is OK too, which can help me figure out which option is the best one for me? I'd also be interested in your own personal experiences of using mobile broadband using a Lenovo T500. I'll accept the answer which gets me closest to making a decision.

    Read the article

  • Recommended CPU upgrade for Dell Vostro 220 with Intel E7300 processor?

    - by Justin Grant
    I've got a Dell Vostro 220 with an E7300 processor (Intel Core 2 Duo @ 2.66Mhz, LGA775 socket) and I'm thinking about upgrading my processor so I can run Windows Server 2008 R2 with Hyper-V, which requires Hardware Virtualization support in the processor. Yes, I know this is underpowered for a server, I'm actually using it as a desktop machine but I'd like to use Hyper-V instead of Virtual Server (which I'm using now for running VMs). I'd like to keep the same motherboard and ideally the same CPU fan and RAM too. Any suggestions for a good, relatively cheap (under $200) processor upgrade?

    Read the article

  • Does Exchange 2010 lift the restriction that DL addresses must be in Active Directory?

    - by Justin Grant
    We'd like to enable end-users to be able to create and maintain their own email distribution lists in Exchange 2010, where those lists may include users inside the company but also customers, partners, etc. who are outside the company. One of the limitations in Exchange 2007 (see this question) was that any member of a DL had to have an entry in active directory. You couldn't just take a group of email addresses (both inside and outside my company) and create an Exchange DL with those addresses without involving Active Directory admins to create entries for each external user. For a company creating hundreds of small mailing lists every month, this was an unacceptable IT expense. So we had to use a separate mailing list solution (GNU mailman) for DLs which included external users. Is this limitation relaxed in Exchange 2010 so we can throw away GNU mailman and use Exchange instead?

    Read the article

  • Windows 7 taskbar groups to use vertical menus only, not thumbnails?

    - by Justin Grant
    I frequently have 10 or more windows of the same application (e.g. Outlook, Word, IE, etc.) open at one time. Windows 7's new taskbar grouping thumbnail feature shows a preview of open windows (aka thumbnails) when you single-click on the taskbar group for that application. But when I have over 10 windows open (more thumbnails than will fit horizontally on my screen), Windows reverts to a vertical menu. This is disconcerting since I need to train myself to deal with two separate behaviors and can never anticipate what I'm going to see when I click on a taskbar group. Furthermore, I find the thumbnails more difficult to visually scan through (vs. the vertical menu) because only 1-2 words of each window's title are shown. Typically that's not enough text to disambiguate and help me find the right window. I'd like to force Windows 7's taskbar grouping to always show a vertical menu (like in XP) instead of sometimes showing thumbnail previews and sometimes showing a vertical menu. Anyone know how (whether?) this can be done? UPDATE: BTW, I'm running the RTM version (build 7600) of Windows 7. There are apparently other solutions out there which work on earlier builds, but which don't work on the RTM build.

    Read the article

  • How can I setup my local Nginx server so I can edit the files?

    - by Shane Grant
    I have my local development machine running Arch Linux, Nginx, PHP-FPM and MySQL. In order for the websites I am working on to run the files need to be owned by the http user. The files are currently located in folders like this: /srv/http/site1/ /srv/http/site2/ When I use the following chown command on the http folder the sites work fine, but I cannot edit the files with my user: chown -R http.users /srv/http When I do this the sites do not work, but I can edit the files: chown -R shane.http /srv/http How can I make it so that my user can edit the files, and the web server can run them at the same time? Thank you

    Read the article

  • setting up/installing/configuring nginx LEMP stack on fresh VPS server

    - by Grant Tailor
    I need some help in settingup/installing and configuring nginx LEMP stack on a fresh new VPS I have. The specs of the CentOS 5.7 VPS are 2GB DDR3 ECC RAM(4GB burst), 1 core 1.5Ghz(3Ghz burst) and 100GB RAID 10 storage, unmetered bandwidth @ 100Mpbs all for a whopping $25/month(unbeatable, yeah I know :) Anyways I have followed this LEMP (will also need MySQL and PHP) stack guide on linode http://library.linode.com/lemp-guides/centos-5 but basically what I want is to be able to host multiple website on this webserver after everything is setup. I am used to using DirectAdmin control panel on other server and want to have things setup so I can host multiple websites - mostly wordpress and drupal themes. Lets say 10 websites on this nginx web server. So can someone please help me on what I need to do to take "full" advantage of nginx power and performance, while been able to easily manage these multiple websites (wordpress and drupal themes)?

    Read the article

  • installing kvm on centos 6.2 getting error: virsh sysinfo error: failed to get sysinfo

    - by Grant
    # virsh sysinfo error: failed to get sysinfo error: unsupported configuration: Host SMBIOS information is not available # virsh -c qemu:///system sysinfo error: failed to get sysinfo error: unsupported configuration: Host SMBIOS information is not available Following this tutorial to the letter: http://eduardo-lago.blogspot.com/2012/01/how-to-install-kvm-and-libvirt-on.html Everything else works fine except this command: virsh sysinfo outputs error. Help!

    Read the article

  • Comparing zip/compression utilities

    - by Grant Palin
    I've used WinZip, WinRar, and 7zip for packaging and compression. I know the first two are payware, and the last is open source. Despite that, they all seem to serve the same overall purpose. Are there any other distinguishing characteristics that make any of the options stand out? I'm not really looking for a "best" package, but would like to know of noteworthy differences between the common tools. For what it's worth, I do seem to like WinRar. Not sure why, but there it is. If it matters, I'm using Windows 7.

    Read the article

  • Do you find using a VPS worthwhile?

    - by Grant Palin
    I am currently on shared hosting, and have been recently looking at the idea of switching to a VPS instead. From what I have gathered, a VPS allows you more control over your server setup. But at the same time you have to set it up yourself, and maintain it. This is the bit I am asking about... Despite the power and flexibility you get from using a VPS, you have to take care of it yourself. Is it worth it? Some context: I am primarily a Windows user, but have been tinkering with various Linux distros off and on for several years. I know enough about Linux to get by, or to be dangerous - take your pick. I've also done some tinkering on my current host, but have no serious sysadmin experience. There's always a first time!

    Read the article

  • Getting network interface device name in powershell

    - by Grant
    I needed a powershell 2 script to get the name and device name of each interface like it is shown in network connections in control panel. Should be easy... $interfaces = Get-WmiObject Win32_NetworkAdapter $interfaces | foreach { $friendlyname = $_ | Select-Object -ExpandProperty NetConnectionID $name = $_ | Select-Object -ExpandProperty Name } However, $name comes back as "Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client)", whereas in control panel it shows "Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) #69", because there are multiple cards. I can't find that number anywhere in the properties. How can I get both the Name and Device Name, exactly as shown in Network Connections, in powershell 2 on windows server 2008 r2?

    Read the article

  • How does azure memory usage work?

    - by Jed Grant
    I have a windows azure website. In the dashboard it shows me that I have used 1.51 GB of the 2GB available per hour. I keep increasing the number of instances available in the shared node so the site doesn't shut down. After each hour finishes, the memory usage still shows 1.51 GB used. I assume this would start at ZERO and then be used as time goes on, but that doesn't appear to be the case. How does server memory work? What are some reasons my application using this much memory? (I use no output caching and generally have just built off of the basic MVC templates provided in visual studio.) What other considerations should I be making to get the amount of memory needed to decrease?

    Read the article

  • Attach BCC to all emails processed through Windows Server 2008 SMTP relay

    - by Grant H.
    I currently have a relatively complicated application that sends emails via a nightly job through an SMTP server on Windows Server 2008. Is there a way to configure IIS/SMTP to send a copy of every email that's relayed to another email address? Essentially, can I add a BCC on the fly through IIS/SMTP configuration? Because of the complexity of the application, we would prefer to change the behavior this way if it's possible as opposed to making code changes to the application.

    Read the article

  • Installing Ubuntu guest crashes Hyper-V host

    - by Grant
    I have a weird problem that I don't even know where to begin diagnosing. Trying to install Ubuntu to a VM locks up the host system! My setup is: Dell R715 server, dual 16 core AMD opteron processors, 96GB RAM Dell MD3600f SAN Server 2008 R2 Datacenter System Center VMM 2012 There are 5 windows virtual machines running that have had no problems. This is the first linux VM I've tried to create. I setup a VM through virtual machine manager, set the CD drive to a Ubuntu 12.04 server x64 iso, and started it up. It boots up the normal ubuntu install menu, but the second I hit enter on "Install Ubuntu Server", I get disconnected. The HOST machine stops responding to pings. So do all virtual machines on it. It locks up entirely - keyboard on the host won't work, mouse won't move, numlock light won't change. There's no blue screen - the host is sitting at the login screen completely unresponsive. I can't find any relevant logs in event viewer after rebooting. What could cause the host machine to freeze like that? It's not a one time occurrence - it happens every time at the exact same point. Thank god this server isn't in production yet!

    Read the article

  • Why do we still have to use drive letters to identify file systems?

    - by Charles E. Grant
    A friend has run into a problem where they installed Windows 7 from an external drive, and the internal boot drive is now assigned to H:. Theoretically this shouldn't cause problems because there are programming interfaces for getting the drive letter for the system drive. In practice though, there are quite a few programs that assume that C: is the only possible location for the system directories, and they refuse to run with the system directories on H:. That's not Microsoft's fault, but it's a pain none-the-less. The general consensus seems to be that a re-install, setting the internal boot drive to C:, is the only way to avoid fix these problems. UNIX-like systems display all file systems in a single unified directory tree and mostly seem to avoid problems like this. Is it possible to configure a Windows system without reference to drive letters, or does the importance of backwards compatibility mean that Windows will be working with drive letters from now until doomsday?

    Read the article

  • System Center 2012 VMM UI is very slow

    - by Grant
    I've recently setup system center 2012 a new server 2008 r2 server which I'm using for virtual machines. Everything seems to be working fine, and the virtual machines are nice and fast. But the Virtual Machine Manager interface is always excruciatingly slow. Sometimes taking up to 15 seconds moving between screens. It's very frustrating trying to use it when a task that just involves a couple clicks ends up taking several minutes. Pages that have a lot of form fields seem to take the longest to load - such as the page to change hardware settings of a virtual machine. Is this just normal performance for VMM? If not, where can I look to find what is slowing it down. Nothing else on the system seems to suffer. I can load and use Hyper-V manager with no noticable slowness. Even programs like event viewer that are usually rather slow seem to load fairly fast. Only the system center programs seem slow. Server is a Dell R710, 2x16 core opteron 6274 processors, 96GB RAM. OS drive is 2x500GB 7.2k RPM SAS drives in RAID1 (opted for the less expensive 7.2k drives since pretty much everything is stored on the SAN). Am I just being impatient? Does anyone else use VMM 2012 and find it slow?

    Read the article

  • MS Access 2010 hide/show text with abutton

    - by grant
    Hi I have a problem where the user has a form in MSAccess. The form contains information about the client. The client fields are – client’s first name, client’s last name, their street address, suburb and city, their landline number and their cell phone number and their email address. However the user does not always want to see the email address and would like to have a button that will show or hide the email address. I have to write a set of instructions that will solve this problem. Can anyone help??

    Read the article

  • Likelihood of a hard drive PCB replacement working?

    - by Grant Limberg
    I have a 1.5TB Seagate 7200.11 that died. The platter still spins up initially when attached to a machine, but then the drive clicks and spins down. Then the cycle repeats. I've found a few sites that sell replacement PCBs, however I don't know if the PCB is the issue, or something else. Given the symptoms above, is it at all likely that a PCB replacement would help? If not, I won't waste my money on the PCB replacement. Note: I put the drive in an external ESATA controller and tried hooking it up to a Linux box here at work and got some error messages in the logs. I can post them if anyone thinks it will help in determining whether a PCB swap would fix the problem I'm running into.

    Read the article

  • useful JMX metrics for monitoring WebSphere Application Server (and apps inside it)?

    - by Justin Grant
    When managing custom Java applications hosted inside WebSphere Application Server, what JMX metrics do you find most useful for monitoring performance, monitoring availability, and troubleshooting problems? And how do you prefer to slice and visualize those metrics (e.g. chart by top 10 hosts, graph by app, etc.). The more details I can get, the better, as I need to specify a standard set of reports which IT can offer to owners of applications hosted by IT, which those owners can customize but many won't bother. So I'll need to come up with a bunch of generally-applicable reports which most groups can use out-of-the-box. Obviously there's no one perfect answer to this question, so I'll accept the answer with the most comprehensive details and I'll be generous about upvoting any other useful answer. My question is WebSphere-specific, but I realize that most JMX metrics are equally applicable across any container, so feel free to give an answer for JBoss, Tomcat, WebLogic, etc.

    Read the article

  • My server's been hacked EMERGENCY

    - by Grant unwin
    I'm on my way into work at 9.30 p.m. on a Sunday because our server has been compromised somehow and was resulting in a DOS attack on our provider. The servers access to the Internet has been shut down which means over 5-600 of our clients sites are now down. Now this could be an FTP hack, or some weakness in code somewhere. I'm not sure till I get there. How can I track this down quickly? We're in for a whole lot of litigation if I don't get the server back up ASAP. Any help is appreciated. UPDATE Thanks to everyone for your help. Luckily I WASN'T the only person responsible for this server, just the nearest. We managed to resolve this problem, although it may not apply to many others in a different situation. I'll detail what we did. We unplugged the server from the net. It was performing (attempting to perform) a Denial Of Service attack on another server in Indonesia, and the guilty party was also based there. We firstly tried to identify where on the server this was coming from, considering we have over 500 sites on the server, we expected to be moonlighting for some time. However, with SSH access still, we ran a command to find all files edited or created in the time the attacks started. Luckily, the offending file was created over the winter holidays which meant that not many other files were created on the server at that time. We were then able to identify the offending file which was inside the uploaded images folder within a ZenCart website. After a short cigarette break we concluded that, due to the files location, it must have been uploaded via a file upload facility that was inadequetly secured. After some googling, we found that there was a security vulnerability that allowed files to be uploaded, within the ZenCart admin panel, for a picture for a record company. (The section that it never really even used), posting this form just uploaded any file, it did not check the extension of the file, and didn't even check to see if the user was logged in. This meant that any files could be uploaded, including a PHP file for the attack. We secured the vulnerability with ZenCart on the infected site, and removed the offending files. The job was done, and I was home for 2 a.m. The Moral - Always apply security patches for ZenCart, or any other CMS system for that matter. As when security updates are released, the whole world is made aware of the vulnerability. - Always do backups, and backup your backups. - Employ or arrange for someone that will be there in times like these. To prevent anyone from relying on a panicy post on Server Fault. Happy servering!

    Read the article

  • Wireless WAN (WWAN) on a Lenovo T500 - built-in or do I need a WWAN modem?

    - by Justin Grant
    I use a Lenovo ThinkPad 2055-3AU at work and I want to get a Wireless WAN data plan with a local mobile telecom provider. I've read conflicting reports online about whether my system is "WWAN-ready" or not. How can I find out which wireless WAN providers (if any) my system can support without buying a separate modem? I looked through Device Manager for anything resembling a WWAN device and didn't see anything, but I also wiped the machine when I bought it and clean-installed Windows 7 with only out-of-the-box Windows and Windows-Update drivers, so it's possible that the device is there but the drivers aren't installed. FWIW, the support page at http://www-307.ibm.com/pc/support/site.wss/quickPath.do?quickPathEntry=20553AU does not specfically list anything about Wireless WAN.

    Read the article

  • Create an image of a CentOS system

    - by Grant unwin
    I provide a server (and site) to a client via Rackspace Cloud Hosting, and my client wants to now host the entire thing within his own account. Since it's not possible to just transfer the ownership, I need to somehow create an image of the machine via SSH which I can then use on a new server. Is this possible, and does anyone know of a way of doing this. Note I am talking about virtualised machines here, but I only have access to the virtualised partition and not the system as a whole.

    Read the article

  • Computer will not boot - disk read error - cannot boot from HD or DVD

    - by Grant Palin
    This is a 3 year-old system: HP a1640n. There have been no issues with it in the past. I added a video card 2 years ago, and more memory 1 year ago, both without issues. There haven't been any recent hardware changes. I did install Win7 in Oct., but there were no issues with that either. I used the computer fine two nights ago, and turned it off. Yesterday, I tried to turn it on, and got the error: "A Disk Read Error Occurred. Press CTRL ALT DEL to restart" So I restart, see the initial start screen (HP) and enter the BIOS. The hard drive and dvd drive appear to be listed, but the names are gibberish text. I tried putting a Windows disk in the dvd drive, and continued with the boot, but the disk did not get recognized. Even though the BIOS was set to check for optical media before the hard drive. Back to the error screen. If the computer would boot from a cd or dvd, I would just figure the hard drive needed replacing. But both being problematic worries me. Is this a matter of replacing both the hard drive and dvd drive, or might it be an indication of a bigger problem? Thanks for any advice.

    Read the article

  • Tool to track bandwidth by domain name?

    - by Grant Limberg
    I'm running an Ubuntu 10.04 server that hosts several domain names. All domains point to the same IP address and use the same network interface. I'm really only concerned with the main domain name such as my-domain1.com and my-domain2.com. It should include subdomains such as www.my-domain1.com with the totals for my-domain1.com. Is there a tool out there that is configurable to track bandwidth usage on a per-domain name basis? Edit: I'm not looking for only web usage. I'm looking for all traffic.

    Read the article

  • My servers been hacked EMERGENCY

    - by Grant unwin
    I'm on my way into work at 9.30 pm on a Sunday because our server has been compromised somehow and was resulting in a DOS attack on our provider. The servers access to the Internet has been shut down which means over 5-600 of our clients sites are now down. Now this could be an FTP hack, or some weakness in code somewhere I'm not sure till j get there. Does anyone have any tips on how I can track this down quickly. Were in for a whole lot of litigation if I dont get the server back up asap. Any help appreciated.

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >