Search Results

Search found 541 results on 22 pages for 'licenses licx'.

Page 18/22 | < Previous Page | 14 15 16 17 18 19 20 21 22  | Next Page >

  • Timeout settings for Remote Desktop Sessions to lock

    - by atroon
    Our office uses a Windows 2003 server to provide access to an accounting application. Recently I was asked to increase the amount of time it takes for the session to lock itself and require the entry of the user's password to resume. That seems to be about ten minutes, at present. I am familiar with group policy and have tweaked those settings to scavenge sessions (and thereby licenses) from sessions that have been disconnected (by the user closing the mstsc.exe client or by a network issue). That's simple and straightforward. But I can't find anything in GP to allow a longer time period before the RDP client window goes black and then, when clicked upon, requires a username and password to resume the session. I must admit this would be nice personally as well, since most of my time is spent documenting the application and/or monitoring its database, so I usually have a window open to the terminal server along with the rest of the staff in the accounting center, but I interact with it very little. I usually enter my password 10-15 times per workday, but I'm pretty good at it by now. ;) So, can this timeout period be adjusted, or are we out of luck?

    Read the article

  • limiting connections from tomcat to IIS - proxy? iptables?

    - by Chris Phillips
    Howdy, I've webapp on tomcat6 which is connecting to an M$ PlayReady DRM instance on IIS6.0 The performance is seen to be best when we bench mark (using ab) the DRM service with 25 concurrent connections, which gives about 250 requests per second, which is ace. higher concurrent connections results in TCP/IP timeouts and other lower level mess. But there is no way to control how the tomcat app connects to the service - it's not internally managing a pool of connections etc, they are all isolated http connections to the server. Ideally I'd like a situation where we can have 25 http 1.1 connections being kept alive permanently from tomcat and requesting the licenses through this static pool of connections, which I think would the best performance. But this is not in the code, so was looking for a way to possibly simulate this at the Linux level. I was possibly thinking that iptables connlimit might be able to gracefully handle these connections, but whilst it could limit, it'd probably still annoy the app. What about a proxy? nginx (or possibly squid) seems potentially appealing to run on the tomcat server and hit on localhost as we might want to add additional DRM servers to use under load balance anyway. Could this take 100 incoming connections from tomcat, accept them all and proxy over the the IIS server in a more respectful manner? Any other angles? EDIT - looking over mod_proxy for apache, which we are already using for conventional use on an apache instance in front of this tomcat instance, might be ideal. I can set a max value on the proxy_pass to only allow 25 connections, and keep them alive permanently. Is that my answer? Many thanks, Chris

    Read the article

  • Regarding AD Domain controllers and remote branch offices

    - by Alex
    We have central HQ building and a lot of small branch offices connecting via VPN and want to implement AD (If you can believe we still haven't). We want everyone to log in using domain accounts and be policed centrally. We are OK with having a RODC in a branch office with like 10 computers. But we have these small branches with two to four PCs only. Some of these branches connect to HQ via IPSec site-to-site VPN, some via remote access (client-based) VPN. So there is no problem with ones that have local RODC or connecting to HQ DCs via VPN router. But how about small branches? We don't really want to set up a machine there, neither we want to invest into Windows Server licenses or fancy network equipment. Also, the problem is that we cannot access HQ DCs via VPN because we are not logged in and connected to HQ internal network yet, so DCs aren't reachable. What is typically done in that situation if it is needed to have central management over policies on those PCs? Or is it better to let 'em loose and use local policies and accounts in this situation?

    Read the article

  • Device CAL, User Cal or Processor license needed for SQL 2008 (architecture explained inside)?

    - by nycgags
    So we have a number of servers in the Amazon cloud running SQL Server Standard edition to aggregate data. For that purpose we are fine, the licensing is handled by our contract with Amazon, no problem there. For the beefier work, we want to install Enterprise Edition (EE) on our servers processing raw data so that we can take advantage of table partitioning. We currently have 3 servers aggregating data from about 40 node servers, all 43 of these servers are running standard edition which is fine. We also have 4 servers running standard processing the raw data, but I think we can get away with 2 (for redundancy) running Enterprise Edition. We have 2-3 dba's that access these DW servers for maintenance (using the same windows login via remote desktop). So visually: 40 -- 3 -- [2] -- 2 -- 1 nodes -- aggregators -- raw (which we want to run EE) -- calculators -- datawarehouse Nodes PUSH to aggregators, Raws PULL from aggregators, Calculators PULL from Raw, Calculators PUSH to datwarehouse I am specifying the push vs. pull in case that changes how the # of licenses is calculated. Q1) how many device (or user) CAL's do we need? Q2) do I need to speak with someone from MSFT to find out if it is ok to install in the Amazon Cloud (Amazon said we need to verify it is ok in our license terms)? Q3) what happens if another device tries to access a server with the limited number of device CAL's? Q4) Are the device CAL's simultaneous number of devices or total? Q5) Do Device and User CAL's cost the same or is there a difference? Q6) Would we need to buy a processor license (we are hoping not to)?

    Read the article

  • Value of Itanium or Sparc over x86_64 for Oracle Deployment

    - by Antitribu
    We are looking at a new environment to run our Oracle Database running on SUSE (potentially migrating to RedHat). Our database is approximately 100GB and performs adequately on our current hardware (x86_64) with approximately 6GB of ram allocated to it. We are growing quickly however and will require more performance shortly. Given the cost of Oracle licenses we would like to maximize the value from each license by choosing the most appropriate CPU to run the software on. The questions are: Are there substantial benefits to looking at Itanium or Sparc hardware, are there any drawbacks? Is there a point where one starts to scale out better? What are the long term support options for Itanium? Given the dominance of x86 would it be safer long term to stick with x86? On average what would be the performance benefit of implementing an Oracle database on Itanium or Sparc over x86_64? Is this an issue at all or will other factors (IO/RAM) cap out first? If anyone can point me towards some solid documentation on comparisons between the platforms that provides good case analysis of when to choose which I'm more than happy to accept that as an answer. Edit:- Added Sparc as an Option as it was previously not considered however with the recent Oracle Sun aquisition seems very relevant.

    Read the article

  • Could I use Windows 7 instead of Windows SBS 2008 for this server?

    - by Ecyrb
    First off, I'm not a sys admin. I'm just a software developer trying to help out my parents' small business. Right now they have one server, a domain controller with a P4 processor running SBS 2003. They also have this machine hosting QuickBooks, MySQL for the old version of an app, and SQL Server 2008 Express for the new version of the app (which will replace the old eventually). They've been complaining about the workstations being slow so I figured it might help if they bought a new server and moved QuickBooks, MySQL, and SQL Server to the new server, leaving the old server as just a DC. In trying to pick an operating system for their new server, I was thinking about Windows SBS 2008 Standard with enough licenses for seven machines. But that's a lot more money than they're going to want to spend. So then I wondered if there's any real advantage to having a server OS as opposed to just throwing Windows 7 on the new server. It's a lot cheaper and I can't think of any SBS features that it would need if it's just hosting QuickBooks, MySQL, and SQL Server. Would it be okay to use Windows 7 for a server like this? Are there any advantages to using SBS 2008 that I would be missing out on? Any additional tips are much appreciated!

    Read the article

  • How to remove Media Center from Windows 8

    - by Arabella
    I bought 2 Windows 8 upgrades, 1 for my PC and 1 for my notebook. I added Windows Media Center to my notebook using the free offer in November (side note: the key was emailed to me within 5 minutes, I see many people have been complaining that it takes a few days). Today I decided to add WMC to my PC as well, so I went onto the Microsoft website, same like last time, and I received the email within a few minutes. Once I added WMC, entered the key and the computer rebooted, my activation is now broken: This product key is already being used on another PC. Try a different key or buy a new one. After rereading the product key email, I realised that the WMC key was exactly the same as the one I had received in November for my notebook (I used the same email, i.e. my Microsoft account Outlook email, for both). I didn't think this would be a problem, as on Microsoft's feature pack page it states: ...is limited to five licenses per customer per promotion. So then I decided, I'll just remove WMC from my PC and go back to Windows 8 Pro. So I turned off the WMC feature, PC restarted, activation still broken because my key has been replaced. I then tried to activate it with my original Pro key. The error it gave was that this key cannot be used with this version of Windows, as it is now Windows 8 Pro with Media Center and not Windows 8 Pro anymore. I've searched a bit and it seems the only way to remove it is do a clean install. I tried the Windows 8 Downgrade Helper, which told me I was already running Win 8 Pro when I tried to downgrade, and that I was running Win 8 Pro with Media center when I tried the other option. To sum up: How do I remove Windows Media Center from Windows 8 Pro without having to do a clean install?

    Read the article

  • Postfix + Exchange + ActiveDirectory; How to mix them

    - by itwb
    My client has got many sub-offices, and one head office. The headoffice has a domain name: business.com All users in the many sub-offices need to have a headoffice email address: [email protected] Anyone not in the head office will need the email forwarded to an external email address. All users in the head office will have their email delivered to Microsoft Exchange. Users are listed in Active Directory under two different OU's: HeadOffice or SubOffice. Is this something able to be configured? I've done some googling, but I can't find any examples or businesses set up this way. Edit: Postfix will accept all email, will need to determine to forward the email to an external account or alternatively have it delivered to MS Exchange. I've done some reading about MS Exchange and that you can 'mail-enable' contacts for forwarding - but I don't know if each AD account requires an Exchange CAL? The end goal is to forward email to external accounts to sub offices or accept email for head office. Maybe I don't need to worry about Postfix to perform this task..... http://www.windowsitpro.com/article/exchange-server-2010/exchange-server-licensing-some-of-your-questions-answered "What about client access licenses (CALs)? You need one CAL per user who will connect to Exchange. Although it might not be 100 percent precise, I prefer to think of it as one CAL per mailbox; there are exceptions for users outside your organization, automated tools that use mailboxes, and so on. Exchange doesn't enforce this limit, so it's on you to ensure that you have the correct number of CALs for the set of clients you support."

    Read the article

  • Using the same Windows 8 Upgrade installer on multiple PCs

    - by Karan
    As per this article: You may transfer the software to another computer that belongs to you. … You may not transfer the software to share licenses between computers. But what if I have a bunch of PCs with a mix of XP/Vista/Windows 7? Can I purchase either the Windows 8 Pro Upgrade $40 (download only) or $70 (DVD) version (both of which come without a key) only once and use it to upgrade all the PCs? Since I'm not sharing the license and each PC has its own valid genuine license, it should be allowed, right, or is it illegal? Even if they want people to shell out $40/$70 for each PC, how would they enforce the use of the installer/media on only one PC each? EDIT: I have been given to believe by a source that the installer will only check for the previous OS' key, which is what is confusing me (I have never purchased an upgrade version before this, only full retail or pre-installed versions). Is this true or will I need to enter two keys to make the upgrade work, one for the previous version and then one for Windows 8? If the latter is the case, then the issue is solved since obviously the same Windows 8 key will not be valid for multiple PCs.

    Read the article

  • Recommendations for good Unix MTA / groupware solutions? [closed]

    - by Jez
    Possible Duplicate: Exchange server replacement that runs on Linux I'm setting up a Debian server, and one of the things I need on it is an MTA. I don't want to use something like Exim or Postfix because I want something that ties in SMTP, POP3, and IMAP all in one (a la Microsoft Exchange). Most MTAs also seem to be hellishly difficult to configure. Try and read the Exim documentation; you could do a university degree on it (I'm not kidding). When you can get an HTTP server like Cherokee which is easy to configure and has a nice web interface, do MTAs or groupware solutions need to be that hard? I'm aware that some people think "the Unix way" is to have lots of different interacting pieces of software (like maybe an SMTP MTA, POP3 service, webmail service, and overarching manager to tie them all together), but I think this is a situation where that just makes things a lot harder to deal with and one large software suite fits in much more nicely. So, I'm looking for good open source software suites that will run on Debian that: Combine (at least) SMTP, POP3, and IMAP Are easy(ish) to configure Have a nice configuration web interface or GUI Are not defunct projects I don't mind if it's groupware and offers calendaring too, but I would only be using the e-mail functionality for now. Another nice-to-have would be built-in webmail (if we're combining a bunch of functionality, why not?) Note however that I do NOT need Outlook support. I am not really looking for an "Exchange replacement drop-in". The suites I've found so far that seem to match the above criteria (and have appropriate licenses) are Citadel, Kolab, and Zimbra. I'd appreciate anyone who has experience with any of these giving me the pros and cons of them, such as how easy they are to configure and what their performance is like. I'd also appreciate any other suggestions for solutions that fulfil my criteria that I may have missed out.

    Read the article

  • screen scraper templates for various websites

    - by intuited
    I'm looking specifically for a convenient way to locally archive posts from this and other similar sites. I'd like to separate the question itself from the answers, or maybe crop the question and store it, keeping the page title. Obviously I don't need to store the menu or the various other site interface chrome. The best way to do this would seem to be to associate an XSLT template with a match on the URL and use that template to pull the various relevant informations and format them. My two-part question: Is there a tool specifically built for this task? I.E. something that takes a URL and checks it against a map of path-matching expressions to templates, and outputs the result of applying the template to that resource? xmlto seems to be most of the way there, and could probably just be called from a script that does the pattern-matching, but something already integrated would be more convenient. Is such a URL_pattern-to-XSLT_template map publicly available somewhere? Question 2.5: Is it legal to do this with sites like this one that have public licenses on their content?

    Read the article

  • Can my employer force me to backup my personal machine? [closed]

    - by Eric B
    Here's the background: Approximately 1.25 years ago, the company I work for was acquired by a larger 400 person company. Before acquisition (and today still) we are all remote employees using our own personal hardware for work-related duties (coding, email, etc). We are approximately 15 employees within the larger organization. Some time after acquisition, the now owning company was slapped with a civil lawsuit. Part of this lawsuit (discovery) is requiring them to retrieve & store from us any related information. Because we were a separate company up until acquisition, there is a high probability that our personal machines might contain information about what the lawsuit alleges (email, documents, chat logs?, etc). Obviously, this depends largely on the person's job function (engineer vs. customer support vs. CEO). All employees are being required to comply. Since acquisition (1.25 yrs), the new company has not provided us with company laptops/desktops. We continue to use personal hardware, licenses, etc for work. Email is via POP3s and not hanging around on the mail server - it's on everyone's client. Documents are spread across personal machines. So, now they want us each to backup our complete personal machines. They are allowing us to create a "personal" folder where we can place personal documents. That single folder will be excluded from backup. Of course, that means total re-arrangement of documents, etc. For most of us, 99% of the data on the machine is NOT related to work. So, what's the consensus? Should we comply? What is their recourse if we do not?

    Read the article

  • Windows 7 product key, which is the valid one - in registry or on a sticker?

    - by me how
    I am not too familiar with the software licensing and how this all works, but I have a question regarding Windows 7 and partially Office - generally Microsoft products. I have been asked to assist our IT guy who wants to collect all the product IDs for Windows 7 and Office. I haven't been given much details how to go about it and how to collect it. After a bit of research I have decided to use a freeware that pulls the software licenses out of the registry. I thought that was the easiest and would provide the most accurate product IDs. I've used Belrac Avisor to obtain all the informations. It turns out that about 25 machines use the same product key. I have asked if the company has bought a commercial license or something but there isn't anyone available at the moment who could answer my question. I have told the IT guy that there are 25 machines using the same product key and asked if that is alright. He told me to go around and write the product keys from the sticker(label) on each machine. I am just not quite sure if that's the right approach specially that the numbers do not match.... So, now I see that the numbers aren't matching and my question is in terms of software licensing which is the VALID and correct product key to provide if ever questioned about software license? Is it the number on the sticker or is it the number stored in the registry?

    Read the article

  • Could not resolve <fx:Script> to a component implementation.

    - by seref
    Hi, i created project with flexmojos maven archtype..i used flexmojos:flexbuilder and compile/run with FlashBuilder 4 everything is okay but when i try to compile project with flexmojos i got following error: [ERROR] Z:....\src\main\flex\Main.mxml:[6,-1] Could not resolve < fx:Script to a component implementation. [INFO] BUILD FAILURE my mxml: <?xml version="1.0" encoding="utf-8"?> <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009" xmlns:s="library://ns.adobe.com/flex/spark" xmlns:mx="library://ns.adobe.com/flex/mx" width="100%" height="100%" creationComplete="application1_creationCompleteHandler(event)"> <fx:Script> <![CDATA[ import mx.controls.Alert; import mx.events.FlexEvent; protected function application1_creationCompleteHandler(event:FlexEvent):void { Alert.show("success!!!!") } ]]></fx:Script> </s:Application> pom.xml like: ...... <packaging>swf</packaging> ...... <properties> <flex-sdk.version>4.1.0.16076</flex-sdk.version> <flexmojos.version>3.8</flexmojos.version> </properties> ...... <build> <sourceDirectory>src/main/flex</sourceDirectory> <testSourceDirectory>src/test/flex</testSourceDirectory> <plugins> <plugin> <groupId>org.sonatype.flexmojos</groupId> <artifactId>flexmojos-maven-plugin</artifactId> <version>${flexmojos.version}</version> <extensions>true</extensions> <dependencies> <dependency> <groupId>com.adobe.flex</groupId> <artifactId>compiler</artifactId> <version>${flex-sdk.version}</version> <type>pom</type> </dependency> </dependencies> <configuration> <compiledLocales> <locale>en_US</locale> </compiledLocales> <mergeResourceBundle>true</mergeResourceBundle> <accessible>true</accessible> <optimize>true</optimize> <targetPlayer>10.0.0</targetPlayer> <showWarnings>true</showWarnings> <linkReport>true</linkReport> </configuration> </plugin> </plugins> </build> <dependencies> <!-- Flex framework resource bundles --> <dependency> <groupId>com.adobe.flex.framework</groupId> <artifactId>flex-framework</artifactId> <version>${flex-sdk.version}</version> <type>pom</type> </dependency> <!-- Include unit test dependencies. --> <dependency> <groupId>com.adobe.flexunit</groupId> <artifactId>flexunit</artifactId> <version>4.0-rc-1</version> <type>swc</type> <scope>test</scope> </dependency> </dependencies> ....... maven output compiler config : INFO] Flex compiler configurations: -compiler.external-library-path C:\...\.m2\repository\com\adobe\flex \framework\playerglobal\4.1.0.16076\10.0\playerglobal.swc -compiler.include-libraries= -compiler.library-path C:\...\.m2\repository\com\adobe\flex\framework \datavisualization\4.1.0.16076\datavisualization-4.1.0.16076.swc C:\... \.m2\repository\com\adobe\flex\framework\flash-integration \4.1.0.16076\flash-integration-4.1.0.16076.swc C:\...\.m2\repository \com\adobe\flex\framework\flex\4.1.0.16076\flex-4.1.0.16076.swc C:\... \.m2\repository\com\adobe\flex\framework\framework \4.1.0.16076\framework-4.1.0.16076.swc C:\...\.m2\repository\com\adobe \flex\framework\osmf\4.1.0.16076\osmf-4.1.0.16076.swc C:\... \.m2\repository\com\adobe\flex\framework\rpc \4.1.0.16076\rpc-4.1.0.16076.swc C:\...\.m2\repository\com\adobe\flex \framework\spark\4.1.0.16076\spark-4.1.0.16076.swc C:\... \.m2\repository\com\adobe\flex\framework\sparkskins \4.1.0.16076\sparkskins-4.1.0.16076.swc C:\...\.m2\repository\com\adobe \flex\framework\textLayout\4.1.0.16076\textLayout-4.1.0.16076.swc C: \...\.m2\repository\com\adobe\flex\framework\utilities \4.1.0.16076\utilities-4.1.0.16076.swc C:\...\.m2\repository\com\adobe \flex\framework\datavisualization \4.1.0.16076\datavisualization-4.1.0.16076-en_US.rb.swc C:\... \.m2\repository\com\adobe\flex\framework\framework \4.1.0.16076\framework-4.1.0.16076-en_US.rb.swc C:\...\.m2\repository \com\adobe\flex\framework\osmf\4.1.0.16076\osmf-4.1.0.16076- en_US.rb.swc C:\...\.m2\repository\com\adobe\flex\framework\rpc \4.1.0.16076\rpc-4.1.0.16076-en_US.rb.swc C:\...\.m2\repository\com \adobe\flex\framework\spark\4.1.0.16076\spark-4.1.0.16076-en_US.rb.swc C:\...\.m2\repository\com\adobe\flex\framework\textLayout \4.1.0.16076\textLayout-4.1.0.16076-en_US.rb.swc C:\...\.m2\repository \com\adobe\flex\framework\flash-integration\4.1.0.16076\flash- integration-4.1.0.16076-en_US.rb.swc C:\...\.m2\repository\com\adobe \flex\framework\playerglobal\4.1.0.16076\playerglobal-4.1.0.16076- en_US.rb.swc -compiler.theme Z:\.....\target\classes\configs\themes\Spark \spark.css -compiler.accessible=true -compiler.allow-source-path-overlap=false -compiler.as3=true -compiler.debug=false -compiler.es=false -compiler.fonts.managers flash.fonts.JREFontManager flash.fonts.BatikFontManager flash.fonts.AFEFontManager flash.fonts.CFFFontManager -compiler.fonts.local-fonts-snapshot Z:\.....\target\classes \fonts.ser -compiler.keep-generated-actionscript=false -licenses.license flashbuilder4 952309948800588759250406 -licenses.license flexbuilder4.displayedStartPageAtLeastOneTime true -compiler.locale en_US -compiler.optimize=true -compiler.source-path Z:\.....\src\main\flex -compiler.strict=true -use-network=true -compiler.verbose-stacktraces=false -compiler.actionscript-file-encoding UTF-8 -target-player 10.0.0 -default-background-color 8821927 -default-frame-rate 24 -default-script-limits 1000 60 -default-size 500 375 -compiler.headless-server=false -compiler.keep-all-type-selectors=false -compiler.use-resource-bundle-metadata=true -metadata.date Fri Mar 04 14:04:37 EET 2011 -metadata.localized-title Main x-default -verify-digests=true -compiler.namespaces.namespace+=http://ns.adobe.com/mxml/2009,Z:\..... \target\classes\config-4.1.0.16076\mxml-2009-manifest.xml -compiler.namespaces.namespace+=library://ns.adobe.com/flex/spark,Z: \.....\target\classes\config-4.1.0.16076\spark-manifest.xml -compiler.namespaces.namespace+=library://ns.adobe.com/flex/mx,Z:\..... \target\classes\config-4.1.0.16076\mx-manifest.xml -compiler.namespaces.namespace+=http://www.adobe.com/2006/mxml,Z:\..... \PozitronUI\target\classes\config-4.1.0.16076\mxml-manifest.xml - static-link-runtime-shared-libraries=false -load-config= -metadata.language+=en_US any help... regards,

    Read the article

  • Where to find xmoov port to C#? (to make Http Pseudo Streaming from c# app)

    - by Ole Jak
    So I found this beautifull script for FLV video format Http Pseudo Streaming but in is in PHP ( found on http://stream.xmoov.com/ ) So does any one know opensource translations or can translate such PHP code into C#? <?php /* xmoov-php 1.0 Development version 0.9.3 beta by: Eric Lorenzo Benjamin jr. webmaster (AT) xmoov (DOT) com originally inspired by Stefan Richter at flashcomguru.com bandwidth limiting by Terry streamingflvcom (AT) dedicatedmanagers (DOT) com This work is licensed under the Creative Commons Attribution-NonCommercial-ShareAlike 3.0 License. For more information, visit http://creativecommons.org/licenses/by-nc-sa/3.0/ For the full license, visit http://creativecommons.org/licenses/by-nc-sa/3.0/legalcode or send a letter to Creative Commons, 543 Howard Street, 5th Floor, San Francisco, California, 94105, USA. */ // SCRIPT CONFIGURATION //------------------------------------------------------------------------------------------ // MEDIA PATH // // you can configure these settings to point to video files outside the public html folder. //------------------------------------------------------------------------------------------ // points to server root define('XMOOV_PATH_ROOT', ''); // points to the folder containing the video files. define('XMOOV_PATH_FILES', 'video/'); //------------------------------------------------------------------------------------------ // SCRIPT BEHAVIOR //------------------------------------------------------------------------------------------ //set to TRUE to use bandwidth limiting. define('XMOOV_CONF_LIMIT_BANDWIDTH', TRUE); //set to FALSE to prohibit caching of video files. define('XMOOV_CONF_ALLOW_FILE_CACHE', FALSE); //------------------------------------------------------------------------------------------ // BANDWIDTH SETTINGS // // these settings are only needed when using bandwidth limiting. // // bandwidth is limited my sending a limited amount of video data(XMOOV_BW_PACKET_SIZE), // in specified time intervals(XMOOV_BW_PACKET_INTERVAL). // avoid time intervals over 1.5 seconds for best results. // // you can also control bandwidth limiting via http command using your video player. // the function getBandwidthLimit($part) holds three preconfigured presets(low, mid, high), // which can be changed to meet your needs //------------------------------------------------------------------------------------------ //set how many kilobytes will be sent per time interval define('XMOOV_BW_PACKET_SIZE', 90); //set the time interval in which data packets will be sent in seconds. define('XMOOV_BW_PACKET_INTERVAL', 0.3); //set to TRUE to control bandwidth externally via http. define('XMOOV_CONF_ALLOW_DYNAMIC_BANDWIDTH', TRUE); //------------------------------------------------------------------------------------------ // DYNAMIC BANDWIDTH CONTROL //------------------------------------------------------------------------------------------ function getBandwidthLimit($part) { switch($part) { case 'interval' : switch($_GET[XMOOV_GET_BANDWIDTH]) { case 'low' : return 1; break; case 'mid' : return 0.5; break; case 'high' : return 0.3; break; default : return XMOOV_BW_PACKET_INTERVAL; break; } break; case 'size' : switch($_GET[XMOOV_GET_BANDWIDTH]) { case 'low' : return 10; break; case 'mid' : return 40; break; case 'high' : return 90; break; default : return XMOOV_BW_PACKET_SIZE; break; } break; } } //------------------------------------------------------------------------------------------ // INCOMING GET VARIABLES CONFIGURATION // // use these settings to configure how video files, seek position and bandwidth settings are accessed by your player //------------------------------------------------------------------------------------------ define('XMOOV_GET_FILE', 'file'); define('XMOOV_GET_POSITION', 'position'); define('XMOOV_GET_AUTHENTICATION', 'key'); define('XMOOV_GET_BANDWIDTH', 'bw'); // END SCRIPT CONFIGURATION - do not change anything beyond this point if you do not know what you are doing //------------------------------------------------------------------------------------------ // PROCESS FILE REQUEST //------------------------------------------------------------------------------------------ if(isset($_GET[XMOOV_GET_FILE]) && isset($_GET[XMOOV_GET_POSITION])) { // PROCESS VARIABLES # get seek position $seekPos = intval($_GET[XMOOV_GET_POSITION]); # get file name $fileName = htmlspecialchars($_GET[XMOOV_GET_FILE]); # assemble file path $file = XMOOV_PATH_ROOT . XMOOV_PATH_FILES . $fileName; # assemble packet interval $packet_interval = (XMOOV_CONF_ALLOW_DYNAMIC_BANDWIDTH && isset($_GET[XMOOV_GET_BANDWIDTH])) ? getBandwidthLimit('interval') : XMOOV_BW_PACKET_INTERVAL; # assemble packet size $packet_size = ((XMOOV_CONF_ALLOW_DYNAMIC_BANDWIDTH && isset($_GET[XMOOV_GET_BANDWIDTH])) ? getBandwidthLimit('size') : XMOOV_BW_PACKET_SIZE) * 1042; # security improved by by TRUI www.trui.net if (!file_exists($file)) { print('<b>ERROR:</b> xmoov-php could not find (' . $fileName . ') please check your settings.'); exit(); } if(file_exists($file) && strrchr($fileName, '.') == '.flv' && strlen($fileName) > 2 && !eregi(basename($_SERVER['PHP_SELF']), $fileName) && ereg('^[^./][^/]*$', $fileName)) { # stay clean @ob_end_clean(); @set_time_limit(0); # keep binary data safe set_magic_quotes_runtime(0); $fh = fopen($file, 'rb') or die ('<b>ERROR:</b> xmoov-php could not open (' . $fileName . ')'); $fileSize = filesize($file) - (($seekPos > 0) ? $seekPos + 1 : 0); // SEND HEADERS if(!XMOOV_CONF_ALLOW_FILE_CACHE) { # prohibit caching (different methods for different clients) session_cache_limiter("nocache"); header("Expires: Thu, 19 Nov 1981 08:52:00 GMT"); header("Last-Modified: " . gmdate("D, d M Y H:i:s") . " GMT"); header("Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0"); header("Pragma: no-cache"); } # content headers header("Content-Type: video/x-flv"); header("Content-Disposition: attachment; filename=\"" . $fileName . "\""); header("Content-Length: " . $fileSize); # FLV file format header if($seekPos != 0) { print('FLV'); print(pack('C', 1)); print(pack('C', 1)); print(pack('N', 9)); print(pack('N', 9)); } # seek to requested file position fseek($fh, $seekPos); # output file while(!feof($fh)) { # use bandwidth limiting - by Terry if(XMOOV_CONF_LIMIT_BANDWIDTH) { # get start time list($usec, $sec) = explode(' ', microtime()); $time_start = ((float)$usec + (float)$sec); # output packet print(fread($fh, $packet_size)); # get end time list($usec, $sec) = explode(' ', microtime()); $time_stop = ((float)$usec + (float)$sec); # wait if output is slower than $packet_interval $time_difference = $time_stop - $time_start; # clean up @flush(); @ob_flush(); if($time_difference < (float)$packet_interval) { usleep((float)$packet_interval * 1000000 - (float)$time_difference * 1000000); } } else { # output file without bandwidth limiting print(fread($fh, filesize($file))); } } } } ?>

    Read the article

  • Keyboard navigation for jQuery Tabs

    - by Binyamin
    How to make Keyboard navigation left/up/right/down (like for photo gallery) feature for jQury Tabs with History? Demo without Keyboard feature in http://dl.dropbox.com/u/6594481/tabs/index.html Needed functions: 1. on keyboardtop/down make select and CSS showactivenested ajax tabs from 1-st to last level 2. on keyboardleft/right changeback/forwardcontent ofactivenested ajax tabs tab 3. an extra option, makeactivenested ajax tab on 'cursor-on' on concrete nested ajax tabs level Read more detailed question with example pictures in http://stackoverflow.com/questions/2975003/jquery-tools-to-make-keyboard-and-cookies-feature-for-ajaxed-tabs-with-history /** * @license * jQuery Tools @VERSION Tabs- The basics of UI design. * * NO COPYRIGHTS OR LICENSES. DO WHAT YOU LIKE. * * http://flowplayer.org/tools/tabs/ * * Since: November 2008 * Date: @DATE */ (function($) { // static constructs $.tools = $.tools || {version: '@VERSION'}; $.tools.tabs = { conf: { tabs: 'a', current: 'current', onBeforeClick: null, onClick: null, effect: 'default', initialIndex: 0, event: 'click', rotate: false, // 1.2 history: false }, addEffect: function(name, fn) { effects[name] = fn; } }; var effects = { // simple "toggle" effect 'default': function(i, done) { this.getPanes().hide().eq(i).show(); done.call(); }, /* configuration: - fadeOutSpeed (positive value does "crossfading") - fadeInSpeed */ fade: function(i, done) { var conf = this.getConf(), speed = conf.fadeOutSpeed, panes = this.getPanes(); if (speed) { panes.fadeOut(speed); } else { panes.hide(); } panes.eq(i).fadeIn(conf.fadeInSpeed, done); }, // for basic accordions slide: function(i, done) { this.getPanes().slideUp(200); this.getPanes().eq(i).slideDown(400, done); }, /** * AJAX effect */ ajax: function(i, done) { this.getPanes().eq(0).load(this.getTabs().eq(i).attr("href"), done); } }; var w; /** * Horizontal accordion * * @deprecated will be replaced with a more robust implementation */ $.tools.tabs.addEffect("horizontal", function(i, done) { // store original width of a pane into memory if (!w) { w = this.getPanes().eq(0).width(); } // set current pane's width to zero this.getCurrentPane().animate({width: 0}, function() { $(this).hide(); }); // grow opened pane to it's original width this.getPanes().eq(i).animate({width: w}, function() { $(this).show(); done.call(); }); }); function Tabs(root, paneSelector, conf) { var self = this, trigger = root.add(this), tabs = root.find(conf.tabs), panes = paneSelector.jquery ? paneSelector : root.children(paneSelector), current; // make sure tabs and panes are found if (!tabs.length) { tabs = root.children(); } if (!panes.length) { panes = root.parent().find(paneSelector); } if (!panes.length) { panes = $(paneSelector); } // public methods $.extend(this, { click: function(i, e) { var tab = tabs.eq(i); if (typeof i == 'string' && i.replace("#", "")) { tab = tabs.filter("[href*=" + i.replace("#", "") + "]"); i = Math.max(tabs.index(tab), 0); } if (conf.rotate) { var last = tabs.length -1; if (i < 0) { return self.click(last, e); } if (i > last) { return self.click(0, e); } } if (!tab.length) { if (current >= 0) { return self; } i = conf.initialIndex; tab = tabs.eq(i); } // current tab is being clicked if (i === current) { return self; } // possibility to cancel click action e = e || $.Event(); e.type = "onBeforeClick"; trigger.trigger(e, [i]); if (e.isDefaultPrevented()) { return; } // call the effect effects[conf.effect].call(self, i, function() { // onClick callback e.type = "onClick"; trigger.trigger(e, [i]); }); // default behaviour current = i; tabs.removeClass(conf.current); tab.addClass(conf.current); return self; }, getConf: function() { return conf; }, getTabs: function() { return tabs; }, getPanes: function() { return panes; }, getCurrentPane: function() { return panes.eq(current); }, getCurrentTab: function() { return tabs.eq(current); }, getIndex: function() { return current; }, next: function() { return self.click(current + 1); }, prev: function() { return self.click(current - 1); } }); // callbacks $.each("onBeforeClick,onClick".split(","), function(i, name) { // configuration if ($.isFunction(conf[name])) { $(self).bind(name, conf[name]); } // API self[name] = function(fn) { $(self).bind(name, fn); return self; }; }); if (conf.history && $.fn.history) { $.tools.history.init(tabs); conf.event = 'history'; } // setup click actions for each tab tabs.each(function(i) { $(this).bind(conf.event, function(e) { self.click(i, e); return e.preventDefault(); }); }); // cross tab anchor link panes.find("a[href^=#]").click(function(e) { self.click($(this).attr("href"), e); }); // open initial tab if (location.hash) { self.click(location.hash); } else { if (conf.initialIndex === 0 || conf.initialIndex > 0) { self.click(conf.initialIndex); } } } // jQuery plugin implementation $.fn.tabs = function(paneSelector, conf) { // return existing instance var el = this.data("tabs"); if (el) { return el; } if ($.isFunction(conf)) { conf = {onBeforeClick: conf}; } // setup conf conf = $.extend({}, $.tools.tabs.conf, conf); this.each(function() { el = new Tabs($(this), paneSelector, conf); $(this).data("tabs", el); }); return conf.api ? el: this; }; }) (jQuery); /** * @license * jQuery Tools @VERSION History "Back button for AJAX apps" * * NO COPYRIGHTS OR LICENSES. DO WHAT YOU LIKE. * * http://flowplayer.org/tools/toolbox/history.html * * Since: Mar 2010 * Date: @DATE */ (function($) { var hash, iframe, links, inited; $.tools = $.tools || {version: '@VERSION'}; $.tools.history = { init: function(els) { if (inited) { return; } // IE if ($.browser.msie && $.browser.version < '8') { // create iframe that is constantly checked for hash changes if (!iframe) { iframe = $("<iframe/>").attr("src", "javascript:false;").hide().get(0); $("body").append(iframe); setInterval(function() { var idoc = iframe.contentWindow.document, h = idoc.location.hash; if (hash !== h) { $.event.trigger("hash", h); } }, 100); setIframeLocation(location.hash || '#'); } // other browsers scans for location.hash changes directly without iframe hack } else { setInterval(function() { var h = location.hash; if (h !== hash) { $.event.trigger("hash", h); } }, 100); } links = !links ? els : links.add(els); els.click(function(e) { var href = $(this).attr("href"); if (iframe) { setIframeLocation(href); } // handle non-anchor links if (href.slice(0, 1) != "#") { location.href = "#" + href; return e.preventDefault(); } }); inited = true; } }; function setIframeLocation(h) { if (h) { var doc = iframe.contentWindow.document; doc.open().close(); doc.location.hash = h; } } // global histroy change listener $(window).bind("hash", function(e, h) { if (h) { links.filter(function() { var href = $(this).attr("href"); return href == h || href == h.replace("#", ""); }).trigger("history", [h]); } else { links.eq(0).trigger("history", [h]); } hash = h; window.location.hash = hash; }); // jQuery plugin implementation $.fn.history = function(fn) { $.tools.history.init(this); // return jQuery return this.bind("history", fn); }; })(jQuery); $(function() { $("#list").tabs("#content > div", {effect: 'ajax', history: true}); });

    Read the article

  • GDB Not Skipping Functions without Debug Info

    - by Alan Lue
    I compiled GDB 7 on a Mac OS X Leopard system. When stepping through a C program, GDB fails to step through 'printf()' statements, which probably don't have associated debug information, and starts printing "Cannot find bounds of current function." Here's some output: $ /usr/local/bin/gdb try1 GNU gdb (GDB) 7.1 Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-apple-darwin10". (gdb) list 1 #include <stdio.h> 2 static void display(int i, int *ptr); 3 4 int main(void) { 5 int x = 5; 6 int *xptr = &x; 7 printf("In main():\n"); 8 printf(" x is %d and is stored at %p.\n", x, &x); 9 printf(" xptr holds %p and points to %d.\n", xptr, *xptr); 10 display(x, xptr); (gdb) b 6 Breakpoint 1 at 0x1e8e: file try1.c, line 6. (gdb) r Starting program: /tmp/try1 Breakpoint 1, main () at try1.c:6 6 int *xptr = &x; (gdb) n 7 printf("In main():\n"); (gdb) n 0x0000300a in ?? () (gdb) n Cannot find bounds of current function (gdb) n Cannot find bounds of current function Any idea what's going on? Alan

    Read the article

  • Debugging MinGW program with gdb on Windows, not terminating at assert failure

    - by devil
    How do I set up gdb on window so that it does not allow a program with assertion failure to terminate? I intend to check the stack trace and variables in the program. For example, running this test.cpp program compiled with MinGW 'g++ -g test.cpp -o test' in gdb: #include <cassert> int main(int argc, char ** argv) { assert(1==2); return 0; } Gives: $ gdb test.exe GNU gdb 6.8 Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i686-pc-mingw32"... (gdb) r Starting program: f:\code/test.exe [New thread 4616.0x1200] Error: dll starting at 0x77030000 not found. Error: dll starting at 0x75f80000 not found. Error: dll starting at 0x77030000 not found. Error: dll starting at 0x76f30000 not found. Assertion failed: 1==2, file test.cpp, line 2 This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. Program exited with code 03. (gdb) I would like to be able to stop the program from terminating immediately, like how Visual Studio's debugger and gdb on Linux does it. I have done a search and found some stuff on trapping signals but I can't seem to find a good post on how to set up gdb to do this.

    Read the article

  • Web Automation Tool

    - by Aaron
    I've realized I need a full-fledged browser automation tool for testing user interactions with our JavaScript widget library. I was using qunit, starting with unit testing and then I unwisely started incorporating more and more functional tests. That was a bad idea: trying to simulate a lot of user actions with JavaScript. The timing issues have gotten out of control and have made the suite too brittle. Now I spend more time fixing the tests, then I do developing. Is it possible to find a browser automation tool that works in: Windows XP: IE6,7,8, FF3 OSX: Safari, FF3 ? I've looked into SeleniumIDE and RC, but there seems to be some IE8 problems. I've also seen some things about Google's WebDriver, which confusingly seems to work with Selenium. Our organziation has licenses for IBM's Rational Functional Tester, but I don' think that will work on the MAC. The idea is to try to run tests on all the browsers our organization supports. Doable? Are my requirements unrealistic? Any recommendations as far as software to try? Thanks!

    Read the article

  • Development environment for ASP.NET with EpiServer

    - by Binary255
    At our company we are going to develop more for the Windows platform than we have done up until now. As this scale of Windows development is new to us it would be nice with some feedback from experienced developers. Requirements we have: 5 developers from the beginning. 15 developers a year from now. All developers should be able to develop at the same time. Be able to develop solution for ASP.NET and EpiServer 5. Our idea: A shared server which developers use for development through Terminal Services. SQL Server Express. Start with some free express edition of Visual Studio, upgrade to a commercial version if we need the additional features. Use IIS and not the web server built into Visual Studio. Questions: Are we on the right track? In terms of license costs the above should be cheapest, right? What do you think about multiple developers doing development using a shared TS-server? Do you know of any company which has a similar development environment? Are we going to miss some features of the full Visual Studio version immediately? Is using Express version a bad choice? Is IIS the best choice? If use IIS the developers may use the same port for deployment. If we use the built in web server each one has to set their own port as we're sharing a machine. Comment answer: We are thinking about a shared server as it will most likely decrease the license costs. So it's purely a cost issue. We are using CVS for version control. Our situation is that we develop on Mac and Linux, that's why buying 1 server license + Visual Studio licenses seems to be a cost effective way of starting this type of development.

    Read the article

  • Ideas for a rudimentary software licensing implementation

    - by Ross
    I'm trying to decide how to implement a very basic licensing solution for some software I wrote. The software will run on my (hypothetical) clients' machines, with the idea being that the software will immediately quit (with a friendly message) if the client is running it on greater-than-n machines (n being the number of licenses they have purchased). Additionally, the clients are non-tech-savvy to the point where "basic" is good enough. Here is my current design, but given that I have little to no experience in the topic, I wanted to ask SO before I started any development on it: A remote server hosts a MySQL database with a table containing two columns: client-key and license quantity The client-side application connects to the MySQL database on startup, offering it's client-key that I've put into a properties file packaged into the distribution (I would create a new distribution for each new client) Chances are, I'll need a second table to store validation history, so that with some short logic, the software can decide if it can be run on a given machine (maybe a sliding window of n machines using the software per 24 hours) If the software cannot establish a connection to the MySQL database, or decides that it's over the n allowed machines per day, it closes The connection info for the remote server hosting the MySQL database should be hard-coded into the app? (That sounds like a bad idea, but otherwise they could point it to some other always-validates-to-success server) I think that about covers my initial design. The intent being that while it certainly isn't full-proof, I think I've made it at least somewhat difficult to create an easily-sharable cracking solution. Also, I can easily adjust the license amount for a given client/key pair. I gotta figure this has been done a million times before, so tell me about a better solution that's just as simple to implement and provides the same (low) amount of security. In the event that external libraries are used, I prefer Java, as that's what the software has been written in.

    Read the article

  • Access ADP - For/Against?

    - by webworm
    I have been tasked with taking an Access 97 application and moving the back-end data to SQL Server while moving the front end to Access 2003 (using Access Data Projects). In the process of this migration the back-end data structures will be changed significantly to support new functionality. If I had my wish we would not be using Access as the front end. I think our application would be much better served by WinForms, WPF, or a web application. We have the time needed to properly plan a business logic layer and implement an excellent solution but powers above me want to stay with Access because that is what they are familiar with. What I could use help with is pros/cons of continuing down this path of Access development. What are some legitimate arguments for and against using Access 2003? Here is what I have come up with so far. Pro Access: Already own Access 2003 licenses Easy GUI development Reports look nice Against Access Having to use VBA (Visual Basic for Applications) ADO vs DAO. Didn't Microsoft change things from Access 2002 to Access 2003? Not tied to Access runtime Choice in front end (WPF, WinForms, even ASP.NET) Maintainability True separation of logic from UI not possible Does Microsoft still support Access ADP? Perhaps there are other issues I am not aware off both for and against Access for application development. I am trying to keep an open mind while at the same time trying to maintain my sanity. I have been using C# since .NET was released and the thought of going back to VBA for six months makes my head hurt. Especially when I feel I could offer so much more if allowed to develop with modern languages and tools?

    Read the article

  • Jquery grid overlay in wordpress

    - by Anders Kitson
    I am adding this simple plugin that I have working in a static html site, and am trying to add it to a wordpress development site based off of 960 gs. The jquery code links are correct but the console gives me this error "Uncaught TypeError: Cannot call method 'addGrid' of null" I got the code from this turtorial http://www.badlydrawntoy.com/2009/04/21/960gs-grid-overlay-a-jquery-plugin/ Here is the code I am using /*<![CDATA[*/ // onload $(function() { $("body").addGrid(12, {img_path: 'img/'}); }); /*]]>*/ Here is the code for the plugin /* * @ description: Plugin to display 960.gs gridlines See http://960.gs/ * @author: badlyDrawnToy sharp / http://www.badlydrawntoy.com * @license: Creative Commons License - ShareAlike http://creativecommons.org/licenses/by-sa/3.0/ * @version: 1.0 20th April 2009 */ (function($){$.fn.addGrid=function(cols,options){var defaults={default_cols:12,z_index:999,img_path:'/images/',opacity:.6};var opts=$.extend(defaults,options);var cols=cols!=null&&(cols===12||cols===16)?cols:12;var cols=cols===opts.default_cols?'12_col':'16_col';return this.each(function(){var $el=$(this);var height=$el.height();var wrapper=$('<div id="'+opts.grid_id+'"/>').appendTo($el).css({'display':'none','position':'absolute','top':0,'z-index':(opts.z_index-1),'height':height,'opacity':opts.opacity,'width':'100%'});$('<div/>').addClass('container_12').css({'margin':'0 auto','width':'960px','height':height,'background-image':'url('+opts.img_path+cols+'.png)','background-repeat':'repeat-y'}).appendTo(wrapper);$('<div>grid on</div>').appendTo($el).css({'position':'absolute','top':0,'left':0,'z-index':opts.z_index,'background':'#222','color':'#fff','padding':'3px 6px','width':'40px','text-align':'center'}).hover(function(){$(this).css("cursor","pointer");},function(){$(this).css("cursor","default");}).toggle(function(){$(this).text("grid off");$('#'+opts.grid_id).slideDown();},function(){$(this).text("grid on");$('#'+opts.grid_id).slideUp();});});};})(jQuery);

    Read the article

  • BlackBerry Deployment Strategies

    - by cagreen
    I'm new to large scale BB app deployment and I'm looking for some clarification on the various methods of deployment. Please bear with me as I'm sure there is more to it than my naive view would lead me to believe. My app is very targeted to corporate users and requires a subscription to some additional services before it can be used. In other words, it's not targeted towards the consumer market, so I'm not worried about people not being able to easily find it online. What do I need to be aware of when looking at deployment strategies? Any gotchas? From my understanding my choices are: - App World small upfront vendor fee users can easily search for and find my app billing handled by RIM 4 licensing models (static, single, pool, dynamic). Though I'm not sure I've seen enough info on the pool and dynamic to fully appreciate how it might help me. - Download from my website billing is handled by me can I enforce the number of licenses that are in use within an organization? is this easier/harder for a user? - What else am I missing?

    Read the article

  • Open source real life license examples: yours or others

    - by donpal
    I'm aware of the usual list of open source licenses, so I'm not even going to list it here. What I'd like to ask is about your open source projects (whether out or planned for the future), and why you're planning to choose a certain license over the other. Basically say I went for X license because I wanted Y and that other license didn't provide it for me. I understand that the language itself can make a difference in the choice of license: interpreted languages like PHP vs. compiled languages like Java. I'm mostly interested in hearing about PHP projects, but of course additional insights are welcome. You may even have chosen that particular language for a licensing reason. Ideally I want to hear answers from people who were involved in the actual project (i.e. your own project), because that usually means you've put some thought into the license yourself and understand the implications of that license. But examples of existing projects that aren't your own are OK. Please just say why you think that license was good/bad for them. But first-hand experience is preferred. Looking forward to hearing some informative input.

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22  | Next Page >