Search Results

Search found 36498 results on 1460 pages for 'linux usb drive'.

Page 18/1460 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • external usb hard drive is not being seen anymore

    - by incrediblehulk
    I think my problem is a little different than several other similar titled questions. Everything started while I was using 10.10. External drive was always recognized and mounted, but the timing of this differed. I mean when I booted, the OS sometimes saw the drive immediately, sometimes after a few minutes, sometimes after hours. Although this was annoying, I tolerated this somehow. Then this problem persisted after I upgraded to 11.04 with a clean install. Afterwards, the drive became totally invisible to the OS. It is not even detected as an usb device anymore. However, there is one thing I can do to make it seen. If I boot to another operating system which can detect the drive, and then boot back to ubuntu, everything is perfect. but this is of course very impractical. To summarize, the usb drive is recognized by ubuntu if and only if another OS in the same computer could recognize it first. I should also say I have not had any problems with the same drive in any other OS or a different computer. My drive is philips with a hitachi hdd inside, has its own power source and any other usb powered drives have never caused this kind of a problem. I've tried almost all recommendations in similar topics but none of them seems to be related to this one. What can I possibly do to fix this?

    Read the article

  • ios7 loops on the "trust this computer" dialog

    - by gcb
    trying to transfer files to the work ipad via my debian7 box. When i plug it on the computer usb port, it shows the dialog about trusting this computer, and the computer shows a gnome alert about the ipad being locked and that i should unlock it and try again. i press "trust" on the ipad and try again on gnome. and it starts again. over and over. endlessly. there are dozen threads about this on apple support forums. no solution. just dozens of "me too" flags. e.g. https://discussions.apple.com/message/23082859#23082859 (44 me-too, 2k views) here is the log/messages i get Oct 23 21:17:39 dotmatrix kernel: [ 1928.517766] usb 2-1.7: USB disconnect, device number 16 Oct 23 21:17:39 dotmatrix kernel: [ 1928.715441] usb 2-1.7: new high-speed USB device number 17 using ehci_hcd Oct 23 21:17:40 dotmatrix kernel: [ 1928.811031] usb 2-1.7: New USB device found, idVendor=05ac, idProduct=12ab Oct 23 21:17:40 dotmatrix kernel: [ 1928.811036] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 23 21:17:40 dotmatrix kernel: [ 1928.811039] usb 2-1.7: Product: iPad Oct 23 21:17:40 dotmatrix kernel: [ 1928.811041] usb 2-1.7: Manufacturer: Apple Inc. Oct 23 21:17:40 dotmatrix kernel: [ 1928.811043] usb 2-1.7: SerialNumber: fec5e0f6a6fa18a936de3c53af661051d290275e Oct 23 21:17:40 dotmatrix mtp-probe: checking bus 2, device 17: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7" Oct 23 21:17:40 dotmatrix mtp-probe: bus: 2, device: 17 was not an MTP device Oct 23 21:17:43 dotmatrix kernel: [ 1932.346505] usb 2-1.7: USB disconnect, device number 17 If i never press the trust dialog it will stay there until i remove the cable. but the logs shows that it gave up 3sec after the cable was connected.

    Read the article

  • RTL8192SU + RTL8191E Linux Issue Installing Driver

    - by s32ialx
    OK I've read tons of fourms of people getting the onboard RTL8191E working and the RTL8192SU working dif is U = USB they are both N and i have both Toshiba L500D-00T pre-installed Win Vistax64-HP and i have obtained the free Win7x64-HP upgrade the onboard wificard sucks and can't hold a stable connection for more then 20minutes in windows but the usb is amazing. Now problem is i tried both Ubuntu and Mandriva with no resolve the issue is the onboard drive detects and actually SHOWS that it's there but no wireless networks detect so it's saying no SSID's are broadcasting which i know is a lie since I'm running a 2wire bell dsl modem with built in wifi and a Linksys wrt54g w/ DD-WRT firmware and both are broadcasting fine. Why don't i use the USB? new in Mandriva Linux Control Center 2010.0 it shows up in Other/Unknown as RTL8191S WLAN Adapter and on the right pane this shows up Identification Vendor: ?Manufacturer Realtek Description: ?RTL8191S WLAN Adapter Media class: ? Connection Bus: ?USB Bus PCI #: ?1 PCI device #: ?5 Vendor ID: ?0x0bda Device ID: ?0x8172 Sub vendor ID: ?0x0000 Sub device ID: ?0x0000 Misc Module: ?rtl819xU In the hardware device manager in mandriva it shows up as unknown but shows that it's realtek and that it's a 8192 chipset. but no option to for a driver install and when i do a make in terminal i get this error and no clue what it means [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# make make: *** /lib/modules/2.6.31.12-desktop-3mnb/build: No such file or directory. Stop. make: *** [all] Error 2 [root@John-PC rtl8192se_linux_2.6.0010.1020.2009_64bit]# any help appreciated. and just encase I'm running currently Mandriva Spring 2010 Free

    Read the article

  • Can a USB/IDE/SATA adapter be flaky?

    - by Ward
    I use USB/IDE/SATA converters a lot and on the two that I have now, I sometimes get errors copying files to drives. It only happens when I'm copying big files to the drive (big can mean as little as 100MB, I think it happens more often with bigger files - 300MB or more), and basically the copy will fail and I'll get one or more error messages about "Delayed write failed." But if I disconnect the drive and re-connect it, I'll usually be able to continue. (The file that was being copied will be corrupt, but otherwise the drive is fine.) I just noticed a new type of flakiness: the data transfer rate can vary widely. I copied one set of files (5x300MB files) and it took 10+minutes, then I copied another set (approx. the same sizes) and it took less than a minute. I haven't done systematic testing, the other things I'm doing on my laptop at the same time might have some impact, and I haven't cross-checked the two adapters I have and the 3 hard drives I'm working with to see if there's a pattern. I'm more wondering if anyone else has seen anything like this.

    Read the article

  • How to simulate a USB drive

    - by rursw1
    Hi all, Is it possible to simulate a USB drive with software only? I mean, for example, to expose a local memory space to the OS so the device manager will recognize it as a USB device. I'm not familiar with hardware implementation, but I'm sure that it is possible somehow to emulate the USB protocol. I began with this book - USB Design By Example. Can anyone please give me additional references to begin with? Thank in advance!

    Read the article

  • Cross platform support for network attached USB hubs?

    - by larsks
    I am looking at network-attached USB hubs in order to run licensed software in a virtualized environment when hardware dongles are required. Are there any solutions that will work with both Linux and Windows? Most of the dedicated devices -- such as the Zonet ZUH2214 or the (oddly expensive) Digi AnywherUSB/2 -- appear to be Windows-only. Linux has the the USB/IP project, for which there appear to be Windows drivers, but the last "News" post on the site was in 2007, so I'm not entirely confident about the viability of the project. Has anyone out there found a solution that will work well in both environments?

    Read the article

  • Linux Mint 14 severe overheating

    - by agvares
    I've tried switching to Mint (it was Mint 12) about 6 months ago, but failed to do it due to enormous overheating which made it virtually impossible to run any applications more complex than Gedit. Time had passed, and now I'm back again with Mint 14, but feeling way more determined. What I face are the following issues: 1) Great overheating (and by great I mean that just by doing nothing my CPU temp is floating around 70-75 C, which I find a lot) 2) Running multiple applications (let's say Chrome, Skype and Pidgin) results in critical overheating and immediate shutdown of the system 3) Due to the stuff listed above, my battery drains in about 10-15 minutes, pretty much turning my laptop into a crippled desktop machine I've got a HP-dv6 laptop (i7, 6gb RAM, dual graphics) Here's the output of lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Whistler XT [AMD Radeon HD 6700M Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 0d:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 13:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01) 19:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) what i've tried to do already: 1) I've edited my grub file to add some "splash" arguments there 2) Installed jupiter and powertop 3) Tried to upgrade to newer kernels (up to 3.8), btw running anything newer than 3.5 results in both resolution and wi-fi detection fail 4) Read lots of forum threads devoted to the topic So, my question is simple: What else might I do to become finally able to use Mint as my default OS without the risk of being burned alive by the CPU heat?

    Read the article

  • My External USB drive stops after reading some data

    - by user191542
    I had the external USB 3.0 western Digital My Book essential 3TB drive. I had loto of data on it. Suddenlt when i start copying data from it then after reading 20GB or so data then i get error that system can't read from the location. I have to turn the uSB power off , disconnect it and then again connect it. so i have to trnasfer the data in small chunks like 20Gb , 30GB etc. I have n ow transferred all the data but i want to know that is hard disk gone or it can be fixed or its something windows fault not HD fault

    Read the article

  • USB Drive is Very Slow

    - by Luminose
    I recently bought a Patriot Xporter XT Boost 8GB Flash Drive whish is supposed to be one of the faster flash drives but it seems extremelly slow. For isntance Firefox takes several minutes to load. Are there any tips or tricks to making it run faster? NTFS vs FAT32? Any registry settings or options in device manager?

    Read the article

  • Shopping for Fast USB Flash Drives

    - by Jim McKeeth
    I would like to pick up some really fast USB flash drives in the 16 - 64 GB range. When looking at drives they just list their size, their form factor (key chain hook, slider, etc.) and the fact that they are all Hi-Speed USB 2.0. It seems like I have heard that different drives have different performance and life expectancy. The sales guy tells me that they are all the same performance any more, but it wouldn't be the first time a sales guy had the wrong technical details. Our objective is to run Virtual PC images off of them, so good speed and resilience to rewrites it important.

    Read the article

  • Windows - Delayed Write Failed error on USB hard drive

    - by ndngrd
    I've got a new Verbatim 1.5TB USB hard drive (Samsung HD154UI) and I'm finding myself completely unable to fill it. I'm using Windows XP. Whenever I try to copy a load of files over, it works for some time (will copy over between 20 and 90GB) but eventually stops with an error saying "The specified path is too deep" - the specified is not too deep, there's nothing more than 2 dirs deep that I'm copying. A balloon pops up at the bottom saying "Windows - Delayed Write Failed" telling me the data could not be copied. This wouldn't be too bad if I could just restart the transfer, but after this error has happened I can't write anything else to the disk - including if I eject it and then connect it to another machine. It just seems completely locked. The only way I can unlock it is to delete everything that I was copying to it. I've tried various USB cables and copying from different machines, and the same thing keeps happening.

    Read the article

  • USB-Sticks and multiple Partitions

    - by Bobby
    Hello. I've got an USB-Stick with multiple Partitions on it (FAT32 (active), FAT32, Ext2 <-- that's another story) and it seems like that my Windows XP can only mount the first partition of the stick. If I try to mount the second one using the volume manager it tells me that I need to make it active and reboot...is it really that limited or am I just missing something here? Partitions: FAT32, System Rescue CD, bootable and active FAT32, some tools ext2, some data (I know that I need extra drivers etc., but that's not asked here. Edit (Solution): Thanks to the answer with the RMB (ReMoveable Bit) I was able to dig up a solution described at this site (Section: On flash drive only the first partition works). Basically, there's an Hitachi Driver available which filters the RMB on Driver-Level, which just needs to be a little modified to function with basically every USB-Stick. All you need to do is adding the "Device Instance ID" to the driver and then use this driver.

    Read the article

  • portable usb harddisk regardless in windows and ubuntu / linux environment

    - by user8184
    I am doing web development mostly in ubuntu. Sometimes i need to go into windows to do other administrative work. Now i am ignorant about file systems. I cannot tell the difference between NTFS and FAT32. My eyes just glaze over the wikipedia articles. All I know is i have been using this 320 Gb portable USB harddisk to save files when I am in ubuntu and when I am in windows. Now i got a situation where sometimes the windows 7 cannot detect the harddisk. I believe it has to do with the file system issue. Or my harddisk is coming apart. To make it easy to backup my files in a portable USB harddisk regardless in ubuntu or windows, please advise me. That means i can go from from linux/ubuntu to portable harddisk read/write files from windows 7 to portable harddisk read/write files the same files. Thank you.

    Read the article

  • View hidden contents of usb device

    - by Srikanth Suresh
    I have a USB with the following contents on ls -lah total 8.0K drwx------ 1 srikanth srikanth 4.0K May 27 22:54 . drwxr-xr-x 4 root root 4.0K May 28 19:37 .. -rw------- 2 srikanth srikanth 0 May 27 22:52 Files.az3w On viewing the properties of the folder I have the following information: 90.4Mb used and 16.1GB free There is data in this pen drive which I am currently unable to view also it is sensitive. After searching about hiding contents in a USB I think that there is a hidden partition here that I cant access. How should I proceed to view the contents without damaging the files already present?

    Read the article

  • Repair snapped USB flash drive

    - by Richard Slater
    I have a USB Flash Drive that has had the USB connector snapped away from the circuit board. In the past I have had great sucess with soldering the connector back to the circuit board with 4 solid core wires. Unfortunatly this particular device shows up as "Unknown Device" in device manager and displays 0ma power usage. Giving a closer look at the circuit board it appears that the Data + connector has come away from the PCB. Which would explain why it is not recognised. Is there any practicable way of lifting the data from the device? larger version

    Read the article

  • Windows Server 2003 not automatically assigning drive letter to external drives

    - by Chris
    My newly rebuilt Windows Server 2003 doesn't automatically assign drive letters to external usb devices. I have to manually open the Disk Management Console and assign it a drive letter every time. It does this with two different drives in all USB ports. I have been doing some reading and I don't have any network drives, I have also already tried USBDLM and it doesn't seem to have made any difference. Specs: ProLiant ML150 G5 with Windows 2003 Enterprise and all updates installed. Any ideas on what I can try to resolve this problem would be greatly appreciated. Chris

    Read the article

  • Flash drive doesn't mount on mac

    - by Doug Harris
    I've got two different USB flash drives which are formatted MS-DOS(FAT-16). When I plug each into my MacBook Pro (running MacOS 10.6 - Snow Leopard), they don't mount. I can see them using Disk Utility. When I run an Ubuntu VM inside of VMWare Fusion, Ubuntu has no trouble mounting these either. I've tested with the drives plugged directly into the machine and plugged into a usb hub -- both give the same results. Is there a setting I've inadvertently set which disables automounting? Is there an issue with mounting FAT-16 drives?

    Read the article

  • Set custom mount point and mount options for USB stick

    - by kayahr
    Hello, I have an USB stick which contains private stuff like the SSH key. I want to mount this stick to my own home directory with 0700 permissions. Currently I do this with this line in /etc/fstab: LABEL=KAYSTICK /home/k/.kaystick auto rw,user,noauto,umask=077,fmask=177 0 0 This works great but there is one minor problem: In Nautilus (The Gnome file manager) the mount point ".kaystick" is displayed. I guess Nautilus simply scans the /etc/fstab file and displays everything it finds there. This mount point is pretty useless because it can't be clicked when the device is not present and it can't be clicked when the device is present (Because then it is already mounted). I know this is a really minor problem because I could simply ignore it but I'm a perfectionist and so I want to get rid of this useless mount point in Nautilus. Is there another way to customize the mount point and mount options for a specific USB device? Maybe it can be configured in udev? If yes, how?

    Read the article

  • Fedora 11 System - Failed Hard Drive Removed, and Boot gets GRUB Hard Disk Error

    - by Mindful
    Greetings, I have a machine with a 120GB ATA drive that has what I thought to be non-essential data on it. I also have a 320GB SATA hard drive with the OS/Application/Files (good data I want to keep). My 120GB ATA is failing I believe, as my computer kept slowing to a halt. However, when I move the drive from BIOS my computer will not start, says "GRUB Hard Disk Error". I know that my Fedora system has an LVM setup. I am looking to just remove the 120GB drive from "the mix", and just have one hard drive. How do I recover ? Thank you. I have access to a Linux Live CD right now and can make any changes. However, it won't boot into my OS - it fails. UPDATE: here's my Grub.Conf # grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd1,0) # kernel /vmlinuz-version ro root=/dev/VolGroup00/LogVol00 # initrd /initrd-version.img #boot=/dev/sda1 default=0 timeout=5 splashimage=(hd1,0)/grub/splash.xpm.gz hiddenmenu title Fedora (2.6.30.10-105.2.23.fc11.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.30.10-105.2.23.fc11.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.30.10-105.2.23.fc11.i686.PAE.img title Fedora (2.6.30.9-102.fc11.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.30.9-102.fc11.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.30.9-102.fc11.i686.PAE.img title Fedora (2.6.27.24-170.2.68.fc10.i686.PAE) root (hd1,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686.PAE ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.24-170.2.68.fc10.i686.PAE.img title Fedora (2.6.27.24-170.2.68.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.24-170.2.68.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.24-170.2.68.fc10.i686.img title Fedora (2.6.27.21-170.2.56.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.21-170.2.56.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.21-170.2.56.fc10.i686.img title Fedora (2.6.27.19-170.2.35.fc10.i686) root (hd1,0) kernel /vmlinuz-2.6.27.19-170.2.35.fc10.i686 ro root=/dev/VolGroup00/LogVol00 rhgb quiet initrd /initrd-2.6.27.19-170.2.35.fc10.i686.img title Upgrade to Fedora 10 (Cambridge) kernel /upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade stage2=http://chi-10g-1-mirror.fastsoft.net/pub/linux/fedora/linux/releases/10/Fedora/i386/os/images/install.img ks=hd:UUID=f11769ba-29bc-46de-8c40-a949720a438e:/upgrade/ks.cfg initrd /upgrade/initrd.img title Win rootnoverify (hd0,0) chainloader +1

    Read the article

  • Host hijacks USB printer from VirtualBox machine

    - by jackhab
    I have Ubuntu 9.1 running Windows XP in VirtualBox. Windows XP is a print server (there is no Linux driver for our printer). The printer is connected via USB and its USB filter is added to virtual machine settings. The problem is that every several hours Ubuntu tries to access the printer (trying to install it) and disconnects it from the virtual machine. The printer remains disconnected until I connect it again manually. I thought it is a problem with Windows power management but disabling sleep/standby in Windows didn't help. Please, advise.

    Read the article

  • Windows XP, USB-Stick and multiple Partitions

    - by Bobby
    Hello. I've got an USB-Stick with multiple Partitions on it (FAT32 (active), FAT32, Ext2 <-- that's another story) and it seems like that my Windows XP can only mount the first partition of the stick. If I try to mount the second one using the volume manager it tells me that I need to make it active and reboot...is it really that limited or am I just missing something here? Partitions: FAT32, System Rescue CD, bootable and active FAT32, some tools ext2, some data (I know that I need extra drivers etc., but that's not asked here. Edit (Solution): Thanks to the answer with the RMB (ReMoveable Bit) I was able to dig up a solution described at this site (Section: On flash drive only the first partition works). Basically, there's an Hitachi Driver available which filters the RMB on Driver-Level, which just needs to be a little modified to function with basically every USB-Stick. All you need to do is adding the "Device Instance ID" to the driver and then use this driver.

    Read the article

  • Use Windows 7 offline sync with external usb hd

    - by René
    Yeah, truly the whole question in the header. Is there a way to use Windows 7 offline sync (which we know from network mapped drives) with a external usb hd? When not, are there similar built in tools or good third party tools? My scenario: I want to buy a ultrabook with SSD which is mostly limited in space. So I'm going to put all files to a external HD and only store current projects on the local SSD. Let's say I have to change project. It would be easy just change sync folders and have the second project synced to my hd too. With network mapped drives it's such easy. Paths do not differ if the drive is offline so in most situations you don't take notice if the folder is offline. And you only have to activate offline file for the folders you courrently need for work. So is there a similar solution for usb hard drives?

    Read the article

  • Linux USB to work as cd rom on mac

    - by user157483
    I am working in driver development in linux USB modules. I have written driver for usb and it is working as cd rom in windows machine 1)I made first partation as fat32 "modprobe g_hidmass file=/dev/mmcblk0p1 cdrom=1 stall=0 removable=1" this works fine in windows 2)I made first partation as hfs partation "modprobe g_hidmass file=/dev/mmcblk0p1 cdrom=1 stall=0 removable=1" but same thing i applied with hfs partation in MAC it is getting error like this "The disk you inserted was not readable by this computer" in diskutil it is shown as CD-rom but not reading the file system. frame like this Please help me how can I overcome this error...

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >