Search Results

Search found 913 results on 37 pages for 'massive boisson'.

Page 18/37 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25 | Next Page >

X won't start, root filesystem mounted read only

- by TK Kocheran

I just experienced a very strange and puzzling problem on my machine that I can't seem to get sorted out. I was running Windows on a second partition, and everything was working great. I then went to restart into Linux, and noticed that X wouldn't start. Everything was displayed in super-low resolution, so I tried reinstalling my NVIDIA driver. I started seeing all of these I/O error problems, so I figured that my SSD was bad. After a bit more playing around, I ran fsck on the drive when mounted from a startup disk as well as badsectors and everything looked great. The SMART drive tests all passed and again, everything was looking good, so I rebooted again and still, no joy. I started then getting some weird USB errors, so I followed someone's advice and unplugged my computer's power supply, then started back up again and my graphics looked a lot better in the BIOS and in the boot logo, but X still wouldn't start. I then found out that my main boot drive was being mounted read-only for some reason. What's going wrong? I've done some pretty extensive tests on the SSD from a startup disk such as writing massive files, reading big files, running filesystem checks on the entire disk, and everything is looking great, until I try to boot. Whenever I try installing the drivers with apt-get, I get a ton of ata error messages looking like this: How can I diagnose what's going wrong and fix it so I can get back to work?

Read the article
Interesting Blog Stats–What Sells

- by Tim Murphy

Just out of curiosity I decided to find out what the most frequently post were on my blog. I knew what number one would be just from checking daily stats from time to time. The main theme that I found in the data is that either pain or humor can really bring people to find your posts. My most viewed post is on turning off Toshiba Flashcards at over 54K views (I think Toshiba should take notice of this massive fail). The second highest is on Interesting Blog titles. This was nothing more than a post that I had put up on a whim of humorous blog titles I had run across. This post earned over 26K views. Going down from there the theme stays the same either people looking for something humorous or people with a problem that you have an answer for are the posts that are most likely to get attention. Remember that blogging can be a great service to your readers. Keep it interesting and they will come. del.icio.us Tags: Blogging,Blog Topics,Blog Stats

Read the article
Install Ubuntu on Asus Eee-PC 1005PE - Dealing with special partitions

- by MestreLion

I have an Asus EeePC 1005PE netbook and im planning on doing a massive re-partitioning (going to install Ubuntu, Mint, XP, etc) Ive noticed it has 2 "special" partitions: a 10Gb Fat32 RESTORE hidden partition (used by BIOS "F9 recovery" feature) and a 16Mb "unknown" partition at the end of the drive (used by BIOS "Boot Booster" feature). So, for both partitions, my question is: Can I move/resize the recovery partition freely? What are the requirements for it? (i mean, for it still be found by BIOS when i press F9/Activate BootBooster?). Partition table order? Partition type? Flags? Label? UUID? Can i make it a Logical (instead of primary) partition? Does it must be the flagged as boot? And, more importantly: where can i find any official documentation about it? Ive ready many (mis)information about it... some say Boot Booster partition must be last (in partition table), some say Recovery must be 2nd, that it must be bootable, etc. How can I know what is really needed for the BIOS to use both F9 and Boot Booster? Note: Im using gParted from a Live USB Stick (Mint 10 / Ubuntu 10.10), and ive noticed that, since the filesystem type of the Boot Booster is not recongnized, it cant move or resize it. Can I delete it and re-create it somewhere else? Whenever i create a 0xEF partition gParted crashes and quits and i cannot open it again (must delete the partition using fdisk / cfdisk)

Read the article
Are there design patterns or generalised approaches for particle simulations?

- by romeovs

I'm working on a project (for college) in C++. The goal is to write a program that can more or less simulate a beam of particles flying trough the LHC synchrotron. Not wanting to rush into things, me and my team are thinking about how to implement this and I was wondering if there are general design patterns that are used to solve this kind of problem. The general approach we came up with so far is the following: there is a World that holds all objects you can add objects to this world such as Particle, Dipole and Quadrupole time is cut up into discrete steps, and at each point in time, for each Particle the magnetic and electric forces that each object in the World generates are calculated and summed up (luckily electro-magnetism is linear). each Particle moves accordingly (using a simple estimation approach to solve the differential movement equations) save the Particle positions repeat This seems a good approach but, for instance, it is hard to take into account symmetries that might be present (such as the magnetic field of each Quadrupole) and is this thus suboptimal. To take into account such symmetries as that of the Quadrupole field, it would be much easier to (also) make space discrete and somehow store form of the Quadrupole field somewhere. (Since 2532 or so Quadrupoles are stored this should lead to a massive gain of performance, not having to recalculate each Quadrupole field) So, are there any design patterns? Is the World-approach feasible or is it old-fashioned, bad programming? What about symmetry, how is that generally taken into acount?

Read the article
Sweden Windows Azure Group Meeting in November & Fast with Windows Azure Competition

- by Alan Smith

SWAG November Meeting There will be a Sweden Windows Azure Group (SWAG) meeting in Stockholm on Monday 19th November. Chris Klug will be presenting a session on Windows Azure Mobile Services, and I will be presenting a session on Web Site Authentication with Social Identity Providers. Active Solution have been kid enough to host the event, and will be providing food and refreshments. The registration link is here: http://swag14.eventbrite.com If you would like to join SWAG the link is here: http://swagmembership.eventbrite.com Fast with Windows Azure Competition I’ve entered a 3 minute video of rendering a 3D animation using 256 Windows Azure worker roles in the “Fast with Windows Azure” competition. It’s the last week of voting this week, it would be great if you can check out the video and vote for it if you like it. I have not driven a car for about 15 years, so if I win you can expect a hilarious summery of the track day in Vegas. My preparation for the day would be to play Project Gotham Racing for a weekend, and watch a lot of Top Gear. My video is “Rapid Massive On-Demand Scalability Makes Me Fast!”. The link is here: http://www.meetwindowsazure.com/fast/

Read the article
Pure functional programming and game state

- by Fu86

Is there a common technique to handle state (in general) in a functional programming language? There are solutions in every (functional) programming language to handle global state, but I want to avoid this as far as I could. All state in a pure functional manner are function parameters. So I need to put the whole game state (a gigantic hashmap with the world, players, positions, score, assets, enemies, ...)) as a parameter to all functions which wants to manipulate the world on a given input or trigger. The function itself picks the relevant information from the gamestate blob, do something with it, manipulate the gamestate and return the gamestate. But this looks like a poor mans solution for the problem. If I put the whole gamestate into all functions, there is no benefit for me in contrast to global variables or the imperative approach. I could put just the relevant information into the functions and return the actions which will be taken for the given input. And one single function apply all the actions to the gamestate. But most functions need a lot of "relevant" information. move() need the object position, the velocity, the map for collision, position of all enemys, current health, ... So this approach does not seem to work either. So my question is how do I handle the massive amount of state in a functional programming language -- especially for game development?

Read the article
public_html permissions for local development

- by maGz

I know this question has popped up a couple times, but I can't seem to find a definitive answer to my issue, so please bear with me. I have Ubuntu Server 12.04 setup in VirtualBox for PHP development and testing (Drupal plus other PHP sites using Yii framework). My question is in 3 parts... 1) If I create a public_html folder under /home/myuser, do I need to give ownership of that folder to the Apache www-data group? If so, are there any specific permissions I should be setting? 755? (Btw, I am following this guide to create the public_html directory and set up multiple virtual hosts per site I create and test) I previously had all of my sites under /var/www, but ran into massive permission denied errors whenever I tried to sFTP to it, either through FileZilla or PhpStorm. This is what I had previously done: sudo chgrp www-data /var/www sudo chmod -R 775 /var/www sudo chmod -R g+s /var/www sudo usermod -G www-data [my_ftp_user] 2) The second part of my question is this: If I create my PHP project and files in Windows through PhpStorm, and then upload via sFTP, will permissions get affected? 3) Once I am satisfied with my developed project, would it be advisable to move and test them under /var/www to see how it would fair in a production-ish environment? I would really appreciate the help and advice here. I'm learning more as I go along, but dealing with Linux files and permissions is a bit of a new ballgame for me! Thank you

Read the article
Amazon EC2 vs Dedicated server at Hetzner, what's the use for EC2?

- by C-Blu

After searching the web I still can't find the reason to use EC2. What's the point to scale EC2? If you expect a huge burst in traffic, they say. OK, but what if you already have a couple of sites with good traffic, and for example medium reserved EC2 instance is not enough. You are paying $36.60(medium reserved for 1year) in EU(Ireland) + traffic + optional expenses for databases and S3 if you use them. Of course as some point when you are under $56.6-$66.1 you can optimize your hosting costs with Amazon EC2. But when you get at some point if purchase EX4 server from Hetzner, it will surpass your perfomance needs for a long time, before you get a massive traffic. (I am wrong?) CPU: i7-2600 Quadcore (3.4-3.8 Ghz) RAM: 16 GB HDD: 2x3 TB SATA (6 Gbit/s) - I think that disc performance of a dedicated is better then of Amazon EBS Traffic: 10 TiB in month included. This is what you get from Hetzner for $56(- 19% VAT) or $66 for EU residents. Please, tell me what's the reason to use Amazon? Which load won't a server from Hetzner take, but Amazon Auto Scaling will? The maintenance of dedicated vs EC2 is still the same? Or hardware failure at Amazon, won't ruin your EBS storage? I'm still not at the level when I need expensive hosting, but want to know beforehand, just to be sure if Amazon infrastructure is better then pure performance of Hetzner's hardware.

Read the article
Client/Server game even in solo: any big problem?

- by Klaim

I'm making a game which have strong basic design based on multiplayer but also should provide a really interesting and self-sufficient solo game. A bit like a real-time strategy game. The events and actions taken shouldn't be as massive and immediate as in a FPS, so you can also think the networking like for an RTS. It's a PC game, targetting Windows, MacOSX and Linux (Ubuntu & Fedora). It's programmed in C++, using a variety of open source libraries, so I have great (potential) control over the performances. So far I always considered that just making the game work with two applications, client & server, even in solo mode was ok. However, as I'm in the process of starting the network code I'm having doubts about if it's a good idea. I'm not a specialist so I might be missing something in my analysis. I see these pros and cons: Pros: The game works only one way so if I fix a bug it should apply on all game modes, whatever the distance with the server is; Basic networking issues would be detected early, including behaviour with the protection softwares (firewall) installed (i am not specialist so this might be wrong); Cons: I suppose that even if it should be really fast enough, networking client and server on the same computer would still be slower than no networking and message passing in (one) process memory. Maybe debugging would be more difficult? I don't have experience in this case but so far I assume that debugging with Visual Studio allows me to debug multiple process so it shouldn't be really different. Also, remote debugging. My question is: is there a big disadvantage that I missed? Or maybe there are advantages that I missed and that should encourage me to just continue with only client-server game sessions?

Read the article
Do you think we will ever settle on a "standard" platform? [closed]

- by GazTheDestroyer

The recent explosion of phone platforms has depressed me (slightly), and made me wonder if we will ever reach any kind of standard for presentation? I don't mean language or IDE. Different languages have different strengths and I can see that there may always be a need for disparity, although I do note that languages are merging somewhat in functionality, with traditional imperitive languages like C++ now supporting things like lambdas. What I'm really talking about is a common presentation mechanism. Before smart phones and tablets came along, the web seemed to be finally becoming a reasonable platform for presenting an application that was globally accessible, not just geographically, but by platform too. Sure there are still (sometimes infuriating) implementation differences and quirks, but if you wrote a decent site you knew it could be accessed on anything from a PC to a phone to a C64 running the right software. "Write Once Run Anywhere" seemed to finally be becoming a reality. However, in the last few years we've seen an explosion of mobile operating systems, and the ubiquitous "app". A good site is no longer enough, you need a native "app", and of course we have a sudden massive disparity in OS, language, and APIs needed to write them as each battles for supremecy. It's kind of weird how the cycle of popularity goes. Mainframes with terminals - thin client. PC - thick client. Web browser - thin client. Phone app - thick(ish) client. I just wonder if you think there will ever be a global standard for clients, or whether the "shiny and different" cycle will always continue along with the battle of the tech du jour.

Read the article
Why is a software development life-cycle so inefficient?

- by user87166

Currently the software development lifecycle followed in the IT company I work at is: The "Business" works with a solution manager to build a Business Requirement document The solution manager works with the Program manager to build a Functional Spec The PM works with the engineering lead to develop a release plan and with the engineering team to develop technical specifications If there are any clarifications required, developers contact the PM who contacts the solution manager who contacts the business and all the way back introducing a latency of nearly 24 hours and massive email chains for any clarifications By the time the tech spec is made, nearly 1 month has passed in back and forth Now, 2 weeks go to development while the test writes test cases Code is dropped formally to test, test starts raising bugs. Even if there is 1 root cause for 10 different issues, and its an easily fixed one, developers are not allowed to give fresh code to test for the next 1 week. After 2-3 such drops to test the code is given to the ops team as a "golden drop" ( 2 months passed from the beginning) Ops team will now deploy the code in a staging environment. If it runs stable for a week, it will be promoted to UAT and after 2 weeks of that it will be promoted to prod. If there are any bugs found here, well, applying for a visa requires less paperwork This entire process is followed even if a single SSRS report is to be released. How do other companies process such requirements? I'm wondering why, the business cannot just drop the requirements to developers, developers build and deploy to UAT themselves, expose it to the business who raise functional bugs and after fixing those promote to prod. (even for more complex stuff)

Read the article
Are scheduled job servers the right choice for a time sensitive game engine?

- by maple_shaft

I am currently architecting and designing an exciting new web application that will be entering into some areas that I have very little experience in, game development. The application is not necessarily a game, but there are some very time sensitive tasks and scheduled jobs that a server will need to run to perform game related activities (Eg. New match up starts at noon every day for a 12 day tournament, updating scoreboards at 5pm every day, etc...) In the past I have typically used cron jobs with the Quartz Scheduler running within a web application server, but I know that this isn't likely a scalable solution for the truly massive userbase that management is telling me to expect (Granted they are management and are probably highly optimistic about this) and also for how important the role of these tasks are in this web application. The other important thing I want to consider is that I want to avoid SPOF (Single Point Of Failure). If the primary job server goes down, another job server should be able to successfully run the job in its place. I suppose this can be done appropriately record locking and database transactions. My question is if scheduled jobs like CRON running on a web application server are a wise design choice given the time sensitive game tasks of this application, or is there something more appropriate for running a scalable game engine parallel to the web application servers?

Read the article
Working with lots of cubes. Improving performance?

- by Randomman159

Edit: To sum the question up, I have a voxel based world (Minecraft style (Thanks Communist Duck)) which is suffering from poor performance. I am not positive on the source but would like any possible advice on how to get rid of it. I am working on a project where a world consists of a large quantity of cubes (I would give you a number, but it is user defined worlds). My test one is around (48 x 32 x 48) blocks. Basically these blocks don't do anything in themselves. They just sit there. They start being used when it comes to player interaction. I need to check what cubes the users mouse interacts with (mouse over, clicking, etc.), and for collision detecting as the player moves. Now I had a massive amount of lag at first, looping through every block. I have managed to decrease that lag, by looping through all the blocks, and finding which blocks are within a particular range of the character, and then only looping through those blocks for the collision detection, etc. However, I am still going at a depressing 2fps. Does anyone have any other ideas on how I could decrease this lag? Btw, I am using XNA (C#) and yes, it is 3d.

Read the article
Database Insider - December 2012 issue

- by Javier Puerta

The December issue of the Database Insider newsletter is now available. (Full newsletter here) Big Data: From Acquisition to Analysis 2012 will likely be remembered as the year of big data, as a new generation of technologies enables organizations to acquire, organize, and analyze the exponentially growing and typically less-structured data generated from a variety of new sources. Oracle has produced a series of five short videos that offer a quick and compelling high-level introduction to big data. Read More Total Cost of Ownership Comparison: Oracle Exadata vs. IBM P-Series Read the research that found that over three years, the IBM hardware running Oracle Database cost 31 percent more in total cost of ownership than Oracle Exadata. Webcast - Oracle Exadata Database Machine X3 Learn about Oracle’s next-generation database machine, Oracle Exadata X3, that combines massive memory and low-cost disks to deliver the highest performance at the lowest cost. Available in an eight-rack configuration, it allows you to start small and grow. Maximum Availability with Oracle GoldenGate Discover how to eliminate not only unplanned downtime but also planned downtime resulting from database upgrades, migrations, and consolidation.Thursday, December 1319:00 CET / 6 pm. UK

Read the article
How to structure reading of commands given at a(n interactive) CLI prompt?

- by Anto

Let's say I have a program called theprogram (the marketing team was on strike when the product was to be named). I start that program by typing, perhaps not surprisingly, the program name as a command into a command prompt. After that, I get into a loop (from the users standpoint, an interactive command-line prompt), where one command will be read from the user, and depending on what command was given, the program will execute some instructions. I have been doing something like the following (in C-like pseudocode): main_loop{ in=read_input(); if(in=="command 1") do_something(); else if(in=="command 2") do_something_else(); ... } (In a real program, I would probably encapsulate more things into different procedures, this is just an example.) This works well for a small amount of commands, but let's say you have 100, 1000 or even 10 000 of them (the manual would be huge!). It is clearly a bad idea to have 10 000 ifs and else ifs after each other, for instance, the program would be hard to read, hard to maintain, contain a lot of boilerplate code... Yeah, you don't want to do that, so what approach would you recommend me to use (I will probably never use 10 000 commands in a program, but the solution should, at least preferably, be able to scale to that kind of massive (?) problems. The solution doesn't have to allow for arguments to the commands)?

Read the article
Network(ing) to the Limit

- by Oracle OpenWorld Blog Team

By Karen Shamban While Oracle OpenWorld attendees are networking, there's an Oracle Global IT team that builds and maintains the massive networks that help run the show. The objective? To keep things running as seamlessly and smoothly as possible, constantly evaluate priorities, mitigate risk, and be ready for whatever might happen -- because things do happen when there are 50,000 plus attendees, tens of thousands of devices, unexpected requirements, and a constant flow of up-to-the-minute information. Here's just some of what it takes to keep the conference going, network style: 100 Oracle network, voice, and desktop engineers; security, risk management, and other IT experts, who come in from 17 countries 1000+ network switches 300+ miles of copper and fiber 485 wireless access points 2,500 wired laptops 300 VoIP phones And just where are all these networks and devices deployed? This is what the team had to build and manage: Moscone North, South, and West, including: The keynote hall Oracle DEMOgrounds in the Exhibition Halls Hundreds of session rooms Connection Centers, Social Avenue, Lounges Registration The Howard Street Tent and Taylor Street Cafe tented venues Oracle Square (Union Square) Yerba Buena Gardens Masonic Auditorium Sessions and demos at 8 hotel venues That's a whole lot of networking going on. And here's the kicker: the team has only 4 days to bring get it all up and running across these many venues, and exactly 12 hours to take it all down once the show ends. The Global IT team puts in the equivalent of 152 24-hour days for set-up, 227 24-hour days of support during the conferences, and then tears it all down in about 20 24-hour days. And in case you were wondering, the planning for next year's Oracle OpenWorld starts ... next week. No rest for the weary. Now THAT's networking! So hats off to the Global IT team -- the job ain't easy, but somebody's got to do it, and they do it remarkably well.

Read the article
SDK mouse relative motion, weird results

- by zaftcoAgeiha

I have a simple SDL application that tracks the relative change in mouse position But for some reason, the motion.xrel and motion.yrel give back massive numbers! my code: SDL_WM_GrabInput(SDL_GRAB_ON); SDL_ShowCursor(false); while(!quit){ // Draw the scene if (invalidated == 1){ on_render(); invalidated = 0; } // And poll for events SDL_PumpEvents(); SDL_Event event; while ( SDL_PollEvent(&event) ) { switch (event.type) { case SDL_KEYDOWN: case SDL_KEYUP: on_key(event.key); break; case SDL_MOUSEMOTION: std::cerr << event.motion.xrel << ":" << event.motion.yrel << std::endl; invalidated = 1; break; ... and the printed results are ridiculous: 400:300 -11297:1705 -11215:1268 -10969:940 -10314:-43 -9986:-698 -9331:-1681 -9003:-2227 -8593:-2664 -8020:-3538 -7774:-3647 -7365:-4193 -7283:-4302 -7119:0 any idea why?? System is Ubuntu 12 running in virtual box

Read the article
The very beggining research for web developing

- by stckxchng

It is a general question to ask what would be the easiest way to start a website, however every one need a little boost up at the begging. There are content management systems, or admin panels, or some people have developed their own systems and many more diffirent things people use at the very beggining. Among others my way was looking for a very lightweight cms and develop a system on to it, unfortunately I couldn't find a good system to develop on, for example I decided to develop on snewscms (the lightest weight cms) but it is really hard to manage since it is not developed with object oriented programming standarts and I thought it would be a mistake to continue developing on to such a system. On the other hand starting to code from the core would be weak about security, and using a massive cms like joomla or drupal will not be good since there will be many things that are unused and moreover I will not feel well when I don't know what I am controlling since it is not easy to know every part of them. What I am asking is what would you do if you had lost all the files you are currently using today, where would you start from? What tool would you use? Or is there a lightweight and well coded tool to get start with?

Read the article
Strange Recurrent Excessive I/O Wait

- by Chris

I know quite well that I/O wait has been discussed multiple times on this site, but all the other topics seem to cover constant I/O latency, while the I/O problem we need to solve on our server occurs at irregular (short) intervals, but is ever-present with massive spikes of up to 20k ms a-wait and service times of 2 seconds. The disk affected is /dev/sdb (Seagate Barracuda, for details see below). A typical iostat -x output would at times look like this, which is an extreme sample but by no means rare: iostat (Oct 6, 2013) tps rd_sec/s wr_sec/s avgrq-sz avgqu-sz await svctm %util 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 16.00 0.00 156.00 9.75 21.89 288.12 36.00 57.60 5.50 0.00 44.00 8.00 48.79 2194.18 181.82 100.00 2.00 0.00 16.00 8.00 46.49 3397.00 500.00 100.00 4.50 0.00 40.00 8.89 43.73 5581.78 222.22 100.00 14.50 0.00 148.00 10.21 13.76 5909.24 68.97 100.00 1.50 0.00 12.00 8.00 8.57 7150.67 666.67 100.00 0.50 0.00 4.00 8.00 6.31 10168.00 2000.00 100.00 2.00 0.00 16.00 8.00 5.27 11001.00 500.00 100.00 0.50 0.00 4.00 8.00 2.96 17080.00 2000.00 100.00 34.00 0.00 1324.00 9.88 1.32 137.84 4.45 59.60 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 22.00 44.00 204.00 11.27 0.01 0.27 0.27 0.60 Let me provide you with some more information regarding the hardware. It's a Dell 1950 III box with Debian as OS where uname -a reports the following: Linux xx 2.6.32-5-amd64 #1 SMP Fri Feb 15 15:39:52 UTC 2013 x86_64 GNU/Linux The machine is a dedicated server that hosts an online game without any databases or I/O heavy applications running. The core application consumes about 0.8 of the 8 GBytes RAM, and the average CPU load is relatively low. The game itself, however, reacts rather sensitive towards I/O latency and thus our players experience massive ingame lag, which we would like to address as soon as possible. iostat: avg-cpu: %user %nice %system %iowait %steal %idle 1.77 0.01 1.05 1.59 0.00 95.58 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 13.16 25.42 135.12 504701011 2682640656 sda 1.52 0.74 20.63 14644533 409684488 Uptime is: 19:26:26 up 229 days, 17:26, 4 users, load average: 0.36, 0.37, 0.32 Harddisk controller: 01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04) Harddisks: Array 1, RAID-1, 2x Seagate Cheetah 15K.5 73 GB SAS Array 2, RAID-1, 2x Seagate ST3500620SS Barracuda ES.2 500GB 16MB 7200RPM SAS Partition information from df: Filesystem 1K-blocks Used Available Use% Mounted on /dev/sdb1 480191156 30715200 425083668 7% /home /dev/sda2 7692908 437436 6864692 6% / /dev/sda5 15377820 1398916 13197748 10% /usr /dev/sda6 39159724 19158340 18012140 52% /var Some more data samples generated with iostat -dx sdb 1 (Oct 11, 2013) Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sdb 0.00 15.00 0.00 70.00 0.00 656.00 9.37 4.50 1.83 4.80 33.60 sdb 0.00 0.00 0.00 2.00 0.00 16.00 8.00 12.00 836.00 500.00 100.00 sdb 0.00 0.00 0.00 3.00 0.00 32.00 10.67 9.96 1990.67 333.33 100.00 sdb 0.00 0.00 0.00 4.00 0.00 40.00 10.00 6.96 3075.00 250.00 100.00 sdb 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.00 0.00 0.00 100.00 sdb 0.00 0.00 0.00 2.00 0.00 16.00 8.00 2.62 4648.00 500.00 100.00 sdb 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.00 0.00 100.00 sdb 0.00 0.00 0.00 1.00 0.00 16.00 16.00 1.69 7024.00 1000.00 100.00 sdb 0.00 74.00 0.00 124.00 0.00 1584.00 12.77 1.09 67.94 6.94 86.00 Characteristic charts generated with rrdtool can be found here: iostat plot 1, 24 min interval: http://imageshack.us/photo/my-images/600/yqm3.png/ iostat plot 2, 120 min interval: http://imageshack.us/photo/my-images/407/griw.png/ As we have a rather large cache of 5.5 GBytes, we thought it might be a good idea to test if the I/O wait spikes would perhaps be caused by cache miss events. Therefore, we did a sync and then this to flush the cache and buffers: echo 3 > /proc/sys/vm/drop_caches and directly afterwards the I/O wait and service times virtually went through the roof, and everything on the machine felt like slow motion. During the next few hours the latency recovered and everything was as before - small to medium lags in short, unpredictable intervals. Now my question is: does anybody have any idea what might cause this annoying behaviour? Is it the first indication of the disk array or the raid controller dying, or something that can be easily mended by rebooting? (At the moment we're very reluctant to do this, however, because we're afraid that the disks might not come back up again.) Any help is greatly appreciated. Thanks in advance, Chris. Edited to add: we do see one or two processes go to 'D' state in top, one of which seems to be kjournald rather frequently. If I'm not mistaken, however, this does not indicate the processes causing the latency, but rather those affected by it - correct me if I'm wrong. Does the information about uninterruptibly sleeping processes help us in any way to address the problem? @Andy Shinn requested smartctl data, here it is: smartctl -a -d megaraid,2 /dev/sdb yields: smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Device: SEAGATE ST3500620SS Version: MS05 Serial number: Device type: disk Transport protocol: SAS Local Time is: Mon Oct 14 20:37:13 2013 CEST Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Current Drive Temperature: 20 C Drive Trip Temperature: 68 C Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 1236631092 Blocks received from initiator = 1097862364 Blocks read from cache and sent to initiator = 1383620256 Number of read and write commands whose size <= segment size = 531295338 Number of read and write commands whose size > segment size = 51986460 Vendor (Seagate/Hitachi) factory information number of hours powered up = 36556.93 number of minutes until next internal SMART test = 32 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 509271032 47 0 509271079 509271079 20981.423 0 write: 0 0 0 0 0 5022.039 0 verify: 1870931090 196 0 1870931286 1870931286 100558.708 0 Non-medium error count: 0 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed 16 36538 - [- - -] # 2 Background short Completed 16 36514 - [- - -] # 3 Background short Completed 16 36490 - [- - -] # 4 Background short Completed 16 36466 - [- - -] # 5 Background short Completed 16 36442 - [- - -] # 6 Background long Completed 16 36420 - [- - -] # 7 Background short Completed 16 36394 - [- - -] # 8 Background short Completed 16 36370 - [- - -] # 9 Background long Completed 16 36364 - [- - -] #10 Background short Completed 16 36361 - [- - -] #11 Background long Completed 16 2 - [- - -] #12 Background short Completed 16 0 - [- - -] Long (extended) Self Test duration: 6798 seconds [113.3 minutes] smartctl -a -d megaraid,3 /dev/sdb yields: smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Device: SEAGATE ST3500620SS Version: MS05 Serial number: Device type: disk Transport protocol: SAS Local Time is: Mon Oct 14 20:37:26 2013 CEST Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Current Drive Temperature: 19 C Drive Trip Temperature: 68 C Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 288745640 Blocks received from initiator = 1097848399 Blocks read from cache and sent to initiator = 1304149705 Number of read and write commands whose size <= segment size = 527414694 Number of read and write commands whose size > segment size = 51986460 Vendor (Seagate/Hitachi) factory information number of hours powered up = 36596.83 number of minutes until next internal SMART test = 28 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 610862490 44 0 610862534 610862534 20470.133 0 write: 0 0 0 0 0 5022.480 0 verify: 2861227413 203 0 2861227616 2861227616 100872.443 0 Non-medium error count: 1 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed 16 36580 - [- - -] # 2 Background short Completed 16 36556 - [- - -] # 3 Background short Completed 16 36532 - [- - -] # 4 Background short Completed 16 36508 - [- - -] # 5 Background short Completed 16 36484 - [- - -] # 6 Background long Completed 16 36462 - [- - -] # 7 Background short Completed 16 36436 - [- - -] # 8 Background short Completed 16 36412 - [- - -] # 9 Background long Completed 16 36404 - [- - -] #10 Background short Completed 16 36401 - [- - -] #11 Background long Completed 16 2 - [- - -] #12 Background short Completed 16 0 - [- - -] Long (extended) Self Test duration: 6798 seconds [113.3 minutes]

Read the article
"There were build errors. Would you like to continue and run the last successful build?" not showing

- by Kevin Wilson

Hi, Not a massive problem but something that has been bugging the life out of me... One of my colleagues was trying out some code on my machine and got the "There were build errors. Would you like to continue and run the last successful build?" pop-up when the build failed on Visual Studio. He clicked on the "don't show this again" checkbox and closed the dialogue. My problem is that I can't get the dialogue to show up again. I found these instructions online: "Select Tools, Options, Projects and Solutions, Build and Run. Then set the option "On run, when build or deployment errors occur" to Prompt to Launch." but that doesn't work. Resetting the IDE settings to default don't make any difference either. Is there any way to get this dialogue back or has it gone forever? Thanks, K

Read the article
ibatis isNotEmpty with multiple variables

- by hibernate

Suppose I have a massive table called inactiveUsers and a search form. I want to conditionally join the inactiveUsers table if any user related characteristic is chosen (address, name, phoneNumber, etc...). Is there any way to do this without the following: <isNotEmpty property="address">JOIN inactiveUsers</isNotEmpty> <isNotEmpty property="phoneNumber">JOIN inactiveUsers</isNotEmpty> <isNotEmpty property="name">JOIN inactiveUsers</isNotEmpty> and so on for another 10-20 isNotEmpty clauses. I would like to do something like: <isAnyNotEmpty properties="address, phoneNumber, name, ....">JOIN inactiveUsers</isNotEmpty> Is this possible with ibatis? If so, how?

Read the article
Convert Environment.OSVersion to NTDDI version format

- by David Brown

In sdkddkver.h of the Windows Platform SDK, there are various OS versions defined as NTDDI_*. For example, Windows XP and its service packs are defined as: #define NTDDI_WINXP 0x05010000 #define NTDDI_WINXPSP1 0x05010100 #define NTDDI_WINXPSP2 0x05010200 #define NTDDI_WINXPSP3 0x05010300 #define NTDDI_WINXPSP4 0x05010400 There are also masks which, along with the OSVER, SPVER, and SUBVER macros, allow you to pull the respective parts out of the NTDDI version. #define OSVERSION_MASK 0xFFFF0000 #define SPVERSION_MASK 0x0000FF00 #define SUBVERSION_MASK 0x000000FF I have all of these defined as constants in C# and what I'd like to do now is convert the data returned by Environment.OSVersion to a value corresponding to one of the NTDDI versions in sdkddkver.h. I could make a massive switch statement, but that's not really as future-proof as I'd like it to be. I would need to update the conversion method every time a new OS or service pack is released. I have a feeling this could be done with the help of some bitwise operators, but I'll be honest and say that those aren't my strong point. I appreciate any help!

Read the article
Why would HTTP transfer via wget be faster than lftp/pget?

- by jondahl

I'm building software that needs to do massive amounts of file transfer via both HTTP and FTP. Often times, I get faster HTTP download with a multi-connection download accelerator like axel or lftp with pget. In some cases, I've seen 2x-3x faster file transfer using something like: axel http://example.com/somefile or lftp -e 'pget -n 5 http://example.com/somefile;quit' vs. just using wget: wget http://example.com/somefile But other times, wget is significantly faster than lftp. Strangly, this is even true even when I do lftp with get, like so: lftp -e 'pget -n 1 http://example.com/somefile;quit' I understand that downloading a file via multiple connections won't always result in a speedup, depending on how bandwidth is constrained. But: why would it be slower? Especially when calling lftp/pget with -n 1?

Read the article
Is there a PHP refactoring tool to tell what functions are never called?

- by ae

I have a large codebase which has suffered many changes over the years. I would like to remove the functions that are no longer called or relevant. Is there a tool that will analysis the codebase and determine if a method is ever used? I'm also using phpunit/xdebug which reports which functions have not been run for the unit tests, however coverage is only at 55% and will require a massive amount of work to bring it up to 100% (I'm working on it!). Anything that was a command line tool would be extra good as I could hook it into hudson (CI).

Read the article
Too Many Different Cell Formats

- by Craig

I have a massive file with 10 sheets recreated from scratch, 12 sheets updated, 5 sheets loaded with raw data, and 7 sheets that are used by the macros for the report. I have recently added a new sheet and am running into the Excel "Too many different cell formats" problem. I have read some of the google search results and they say I should simplify the formatting, but I don't even know how I got up to 4000 distinct cell formats, let alone how much I'm using which ones, so I can remove some. It is also popping up some times the file is run, but not all, until such time as it comes up, and then it happens every time it is run. Since the macro is doing so much of the work, including creating the 10 sheets from scratch, I am not sure what to do. Does anyone know of a Macro I could run to get a listing of all the cell formats and how many cells are using them? Does anyone know of a program they trust to help remove excess cell formats? Thanks, Craig

Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25 | Next Page >