Search Results

Search found 4435 results on 178 pages for 'matt dell'.

Page 18/178 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Wireless is disabled by hardware switch on Dell Inspiron 1750

    - by lowerkey
    I have a problem where Ubuntu (12.04) says there is a wireless network card, but it is disabled by a hardware switch. How do I turn it on? I checked the BIOS, and the wireless card is enabled there. Fn + F2 was also no success. The results of rfkill list: 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes sudo rfkill unblock wifi did nothing to the Wireless Status.

    Read the article

  • Dell Latitude E6420 in-built microphone not working

    - by user38845
    I'm running with Ubuntu 12.04 64bit on Dell Latitude E6420. The inbuilt microphone is not working, and is not listed on the sound settings dialog. According to lspci, the device is: 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) I've also looked at alsamixer, and can see a "mic" and "dock mic" but fiddling with these and increasing to max amplification doesn't appear to change anything. Note: I've raised a certification question on the same topic here: https://answers.launchpad.net/ubuntu-certification/+question/200678

    Read the article

  • Slow wireless on Dell XPS 14 ultrabook

    - by GaryBishop
    I've got Ubuntu 12.04 running on this Dell XPS 14 Ultrabook (L421X). Everything is working but my wireless transfer rates are low. I'm getting about 1MB/s download speed on the ultrabook vs 15MB/s on the E6500. If I move into the room with the access point the speed climbs to 15MB/s so I'm guessing it is a signal strength issue but wavemon shows comparable signals to those seen by the E6500. Are there any settings I can tweak in hopes of making it faster?

    Read the article

  • After Re-opening Laptop, Programs Blink with Each Keystroke, Ubuntu 12.04, Dell Latitude D620

    - by Calhan
    I'm running Ubuntu version 12.04 on Dell D620 laptop and have been for months. Everything has been working fine until a week ago, when suddenly every time I close the laptop and open it again, the program in use blinks each time I make a keystroke. Only the program blinks, not the whole screen. Rebooting solves the issue until I close the lid again. I have installed all the updates recommended in the package manager. Clues?

    Read the article

  • Ubuntu 12.04 video issue on Dell Inspiron 1100

    - by Edwould
    I have an old clunker - Dell Inspiron 1100 with A32 BIOS. I managed to install correctly from a USB drive, and the screen showed graphics in full natice 1024 x 768 - as did the 'try from USB' Ubuntu option. Once I committed to a full install on the HDD, the video resolution comes up as 640 x 480 with no other resolutions to change to full screen. Does anyone have some advice to allow the full LCD panel to be used? Thanks for reading Ed

    Read the article

  • Is the tap-to-click issue solved

    - by AWE
    I'm just an average Joe when it comes to computing (maybe less then the average Joe) but I hate tap-to-click. In system and settings there is no touchpad tab? Is it true that this has been fixed? I'm using Dell inspiron N5110 xinput list: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=13 [slave pointer (2)] This is really strange because Dell is one of the top manufacturers in laptops and Ubuntu one of the top distros in Linux and Canonical claims that they are working closely with Dell.

    Read the article

  • Are the Broadcom drivers in any new releases for my Dell with BCM4401 and BCM4311

    - by ematthe1
    I installed 12.04 on my wife's Dell laptop to replace 10.04. The code for the Broadcom drivers is broken and I am a user, not a coder. Does any available release of Ubuntu have the drivers in place so I can install and run and get my life back after days of thrashing around. I am willing to do some work, but I am not up to heavy duty command line activity. Please help if you can with any information. Thanks in advance. Matt

    Read the article

  • Increasing SQL Server / Sage performance with SSD? (Dell PE T410)

    - by Anthony
    I have a client wanting better performance of their Sage (Accpac & CRM) server (v5.5, soon to be v7). It's running on 1 of 2 Hyper-V VMs (Svr2008) on a Dell PE T410 server with 24GB of RAM (1333MHz) & dual quad-core, and both VMs (only their C: drives) are on a single RAID5 array. All clients connect via 1Gb ethernet. The 2nd VM is SBS2008 with 9GB RAM (& all SBS dbs & company data are on a separate RAID5 array), & 3GB RAM for the Svr2008 hypervisor. I've given the Sage/SQL Server VM all the RAM I can (12GB) & SQL Server RAM caching (~8GB, never exceeds ~7.5GB, eg. entire db can now be cached in RAM) and that's helped significantly. Upgrading the Hypervisor to Svr2012 is an obvious step, but probably not a dramatic improvement? What about an SSD for this Sage/SQL Server VM (VM = 100GB, <10GB for the actual live DB) ? Can SSDs be put into the SAS hot-swap bays? Or will I have to use the mobo SATA(3Gbps?) ports, or PCI-E SSD card? Should SSDs be RAIDed for this situation? Or is SSD's higher reliability offsetting the need for RAID1/5/10? (I have nightly full disk backups) New territory for me, would appreciate some feedback. Thanks, Anthony.

    Read the article

  • Increasing MSSQL/Sage performance with SSD? (Dell PE T410)

    - by Anthony
    I have a client wanting better performance of their Sage (Accpac & CRM) server (v5.5, soon to be v7). It's running on 1 of 2 Hyper-V VMs (Svr2008) on a Dell PE T410 server with 24GB of RAM (1333MHz) & dual quad-core, and both VMs (only their C: drives) are on a single RAID5 array. All clients connect via 1Gb ethernet. The 2nd VM is SBS2008 with 9GB RAM (& all SBS dbs & company data are on a separate RAID5 array), & 3GB RAM for the Svr2008 hypervisor. I've given the Sage/MSSQL VM all the RAM I can (12GB) & SQL RAM caching (~8GB, never exceeds ~7.5GB, eg. entire db can now be cached in RAM) and that's helped significantly. Upgrading the Hypervisor to Svr2012 is an obvious step, but probably not a dramatic improvement? What about an SSD for this Sage/SQL VM (VM = 100GB, <10GB for the actual live DB) ? Can SSDs be put into the SAS hot-swap bays? Or will I have to use the mobo SATA(3Gbps?) ports, or PCI-E SSD card? Should SSDs be RAIDed for this situation? Or is SSD's higher reliability offsetting the need for RAID1/5/10? (I have nightly full disk backups) New territory for me, would appreciate some feedback. Thanks, Anthony.

    Read the article

  • Dell PowerEdge T710, add a new hard disk, how to?

    - by user1340802
    I need to add a new hard disk to a PowerEdge T710 running on Vmware EXSI 4. this hard disk is a 'normal' desktop hard disk 1TB (that is it is not coming from Dell, I also have no rack for it to plug it inside any of the front bay) I would like to add this disk for a virtual machine needing space, the most easily as possible. I have find that there is an avaiable sata cable with its electric power, so may I just add the disk plugging these and using the empty 5"1/4 slot available under the CD drive (with a 5"1/4 - 3"1/2 bay adaptater) ? (even if this way it seems that i bypass the raid controller that own the front bay with racks)) that way i think could be easier than adding the disk to the already defined Raid (btw i am also not sure on how to do these but i would not risk to mess the already working things) what are the other operations that i would have to do to ? (sorry I am a real beginner on Vmware EXSI and PowerEdge management :/ i have seen that there is some management from Bios (CTRL+R as start up) so that the disk will be seen or initialize it. I am really not sure of the steps needed...) thank you, best.

    Read the article

  • Strange messages on new Dell Workstation during bootup

    - by dan99t
    I recently installed Windows 7 Ultimate on a new Dell T-7500 Workstation, and am seeing some strange messages on the screen: Dell SAS 6 Host Bus Adapter BIOS MPTBIOS 6.22.03.00 ( 2008.08.06 ) Initializing….. Press Ctrl – C to run SAS Configuration Utility Searching for Devices at HBA 0….. Dell MPT Boot ROM Successfully installed Then it loads Windows 7. All of above happens on its own, I don't touch anything. So what is going on & what do I have to do get rid off those initializing commands ? I have never had this happen to any previously owned Dell systems. Also I haven't installed any drivers yet but Sound, Video & Internet does work. Do I need to install any additional drivers?

    Read the article

  • Replacing stock Core 2 Duo heatsink fan (just the fan really) with a Dell CPU fan

    - by user647345
    My old heatsink fan broke and I'm trying to reconnect its plugs to a new fan. My Dell CPU fan has some custom Dell plug. I snipped the old fan's wire in half and kept the plug on the end of it. I want to connect it to the Dell fan wire to the plug. The motherboard is a P5Q-e, the stock Core 2 Duo fan was .20A and the dell is .70A. Is that going to matter? The wire from the fan has four wires, the wire with the plug has four wires. They share three, of the four colors: red, black, and blue. Dell's fourth wire is white, while the plug's fourth wire is yellow. Is it safe to assume that I just connect the yellow and the white plug together and match the rest up? I don't want to take any risk of damaging anything. It runs fine passively without a fan, but I have speedstep on, so I would like to use this fan and just fasten it to the heatsink with some twist ties and paperclips and call it a day.

    Read the article

  • Docking Station Sound Doesn't Work on Dell D830 with Windows 7

    - by cisellis
    EDIT: I can only mark one answer as the correct one but the actual solution was a combination of two comments (updating the BIOS to A15 AND installing the Sigmatel audio drivers). I have a Dell Latitude D830 laptop that is running Windows 7 Enterprise x64. I connect to a docking station during the day with multiple monitors, a keyboard and a mouse. Everything runs with no problems including most of the docking station ports (usb, monitors, etc.) However, the sound port from the docking station does not work since the upgrade to Windows-7. Even with the laptop plugged in, the sound always comes out of the laptop, not the headphones plugged into the docking station. Here's what I've tried: I've seen other issues like via Google this that seem to be mostly unanswered. I found one or two that referenced using the Vista x64 drivers, especially the Nvidia drivers. I do not have an Nvidia chipset but I've reinstalled the sound drivers and that has not helped. I don't have a support contract and considering the cost is usually high to call Dell, that's not an option. Dell's forums are pretty much a wasteland and I've found no help there. Since this is a docking station I thought I might need to try the SATA or Intel chipset drivers from the dell site instead, however I'm not really sure and I need to work on this laptop in the meantime. I can't really afford the downtime to experiment with random drivers all day in case they turn out to be incompatible (Dell still hasn't added Windows 7 to their support site as far as I can tell). Does anyone have any other ideas? Has anyone had this issue and solved it? If so, how? Thanks in advance for your help.

    Read the article

  • Install lubuntu 12.04 on an old Dell c600 : Video issues

    - by maniat1k
    I am trying to install lubuntu on an old laptop. I use the 386 alternate instalation of it, because it has only 256mb ... All when ok so when I start up the lubuntu the screen splits between 1024x768 and 800x600... its very horrible to use =). Ok I do this: lspci and found an ATI Rage mobility M3. 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02) So I tryied the old xorg way to edit the missing resolution, but it does not work:... Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Rage Mobility M3 (AGP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection on an brand new xorg.conf... Do an init 6 to see if X take the changes, but nothing habbened: also tryed to do pkg-reconfigure -changedir /etc/X11 (where I created the new xorg.conf) and nothing.. removed the X conf from /tmp.. also do sudo apt-get update / upgrade... and no luck... UPDATE Updated to 12.04. This an edited xorg fr old dells like mine: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg # xorg.conf for dell latitude c600 by A. Howlett and others Section "ServerLayout" Identifier "Default Server Layout" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "Generic Mouse" "AlwaysCore" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/artwiz-aleczapka" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/util" FontPath "/usr/local/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts/aquafont" FontPath "/usr/share/fonts/artwiz" FontPath "/usr/share/fonts/artwiz-aleczapka-en" FontPath "/usr/share/fonts/corefonts" FontPath "/usr/share/fonts/freefont" EndSection Section "Module" Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "pex5" Load "record" Load "xie" Load "v4l" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "CorePointer" Option "Device" "/dev/psaux" Option "Protocol" "PS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "SendCoreEvents" "true" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "laptop LCD" VendorName "Dell" ModelName "Latitude C600" HorizSync 31.5-48.5 VertRefresh 40-70 EndSection Section "Device" Identifier "Video0" Driver "r128" VideoRam 8192 Option "EnablePageFlip" "true" Option "AGPFastWrite" "true" Option "AGPMode" "2" BusID "PCI:01:00:0" Screen 0 Option "Display" "FP" Option "MonitorLayout" "CRT, LFP" EndSection Section "Screen" Identifier "Screen0" Device "Video0" Monitor "laptop LCD" DefaultDepth 16 Subsection "Display" Depth 32 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection

    Read the article

  • Dell Latitude E6520 overheating

    - by Wu Yi Han
    I'm a newcomer to Ubuntu 11.10. My laptop is a Dell Latitude E6520, Sandy Bridge platform. The system cooling fan is crazy all the time. I don't do any intensive tasks. I really hope my laptop doesn't become a mushroom cloud. I suppose there's no perfect way to solve this... Can I lower the CPU frequency? Jupiter 0.0.51 was installed (power save mode). Cooling worked in my Windows 7 system until I deleted it. (I won't go back to Windows 7.)

    Read the article

  • Problem while installing amd driver on ubuntu 12.10 on my dell inspiron 5520

    - by Arun
    I have a dell inspiron 5520 which has switchable graphics mode with amd radeon hd 7600m. I have recently installed ubuntu 12.10 alongside windows. But i can't install the driver for grahics card. While typing "sudo apt-get install fglrx-installer" it says unable to locate the package. While adding the repository ubuntu-x-swat/x-updates it shows error that "The requested URL /ubuntu-x-swat/x-updates/ubuntu/dists/quantal/main/binary- i386/Packages was not found on this server." In another attempt i download driver from amd-driver site, and then installing from terminal it shows that some errors come while installing and I get the blank screen only. So how to install the amd driver on my laptop.

    Read the article

  • Dell Inspiron 1120 Ubuntu Light -> Desktop and now I'm having problems with wifi and suspend

    - by David N. Welton
    I got a Dell Inspiron 1120 which ships with Ubuntu Light, as well as Windows. My wife prefers Ubuntu, but obviously outside of web stuff, you can't do a lot with Light, so I went ahead and installed the Desktop version of Ubuntu (10.10 / maverick). Whereas before it suspended beautifully and connected to wifi networks flawlessly, it now displays the following problems: It seems to suspend ok, but on resume, the screen remains blank, even though the computer appears to wake up again. Wifi doesn't connect. I tried using the suggested proprietary drivers, and those don't seem to change the situation. All in all, a bit frustrating to run into these sorts of "regressions" - does anyone know what sort of drivers and such Ubuntu Light might have shipped with for this computer that made it work so well? Unfortunately, I wiped the disk in order to install the Desktop version of Ubuntu.

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >