Search Results

Search found 5243 results on 210 pages for 'mirror drivers'.

Page 18/210 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

• Ubuntu 12.04 resolution stuck on 640x480

  - by user212483

  I am new to Ubuntu and I was trying to get my HDMI enabled TV to work with my Ubuntu 12.04 computer and I installed a Nvidia driver using the "additional drivers" program. After that didn't work, I started playing around with the dual booted windows 7 on my computer. Now, I've never used that windows since I installed it so I was stripped down to bare minimum so I tried to adjust the resolution(as it was on lowest resolution) and tried to connect the HDMI, which didn't work. After that I came back to my Ubuntu installation only to find out that it is now stuck on 640x480 resolution. I tried to remove the driver that I installed again using the "additional drivers" program but that didn't help at all. The error that showed up was - Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1366x768@60Hz (pass 1) Any help would be appreciated as this is very annoying. Thanks

  Read the article

• Ubuntu 13.10, kernel 3.11 blank screen issue with hybrid graphics

  - by Lagerbaer

  On my HP Envy, which has both an Intel on-chip graphics card and an Nvidia Geforce: *-display UNCLAIMED description: 3D controller product: GK208M [GeForce GT 740M] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: cap_list configuration: latency=0 resources: memory:d2000000-d2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:5000(size=128) memory:b2000000-b207ffff *-display description: VGA compatible controller product: 4th Gen Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 06 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:d3000000-d33fffff memory:c0000000-cfffffff ioport:6000(size=64) I have trouble with all newer kernels. I basically had to install 12.04 LTS and use their 3.5 kernel family to get the system to boot. The 3.8 from 12.10 or the newest 3.11 from Ubuntu 13.10 leave me with a black screen upon boot. On one occasion I did hear the "log in" sound, but the screen did not display anything. I have purged all nvidia drivers so I guess it should just use the intel drivers, but apparently this is all messed up with newer kernel versions. This is different from the other "nvidia boots into blank screen" bug in that I don't rely solely on an nvidia card. Surely the intel on-chip card should be supported and leave me with something different from a blank screen? Again, it only works with kernel versions 3.5.0-41-generic, not with the 3.11.0-12 one that ships with Ubuntu 13.10. When I go into the grub menu and change the boot options from 'quiet splash' to 'nomodeset' I am able to boot the system, but then I don't get any graphics and trying 'sudo service lightdm start' doesn't succeed (I get 100% CPU for apport, but this doesn't do anything either, so I kill it). Help, I'm all out of ideas. EDIT: Let me add that I'm using the EFI boot system and have a dual-boot installation with Windows 8.

  Read the article

• Broadcom Wireless Issues in Lubuntu 14.04

  - by ratxinxaxcage67

  I recently installed Lubuntu 14.04 on my parents' old laptop, and I've been having a super difficult time getting the Broadcom card up and running. I've been following this thread: Installing Broadcom Wireless Drivers ...but I'm still stuck. lspci -vnn | grep Network showed: 06:05.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 02) iwconfig showed: lo no wireless extensions. eth0 no wireless extensions. I've installed b43-firmware-installer and b43-fwcutter and also the linux-firmware-nonfree package. At boot, I keep getting a b43-phy0 error, so I tried sudo rmmod b43, and I got: rmmod: ERROR: Module b43 is not currently loaded I also tried: dmesg | grep b43 [ 17.318405] b43legacy-phy0: Broadcom 4306 WLAN found (core revision 4) [ 17.384870] b43legacy-phy0: Loading firmware b43legacy/ucode4.fw [ 18.046777] b43legacy ssb0:0: Direct firmware load failed with error -2 [ 18.046785] b43legacy ssb0:0: Falling back to user helper [ 18.047858] b43legacy-phy0 ERROR: Firmware file "b43legacy/ucode4.fw" not found or load failed. [ 18.047965] b43legacy-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 3). I went to url it told me to, but it didn't tell me to do anything I haven't already tried. Any help and/or suggestions would be greatly appreciated!

  Read the article

• Acer Aspire One 725 - missing graphic card driver for Radeon HD 6290?

  - by Melon

  Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

  Read the article

• Why won't my graphics work in Ubuntu 12.04 LTS?

  - by user170974

  I'm very new to Ubuntu and to Linux in general, and took the leap and formatted my PC to Ubuntu 12.04 LTS very recently :) I seem to be having some trouble getting my graphics card to run properly, I looked over what information I could find but I still cannot get it up and running and figured this was a good place to ask for help. The information I can find on my graphics is as follows: (Terminal command) lspci outputs: 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250] 02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] I tried using a mixture of the following links: How do I fix my installation of ATI Catalyst Video Driver in 12.04 LTS? What is the correct way to install ATI Catalyst Video Drivers (fglrx)? Ubuntu Precise Installation Guide But it does not seem to work, since running fglrxinfo in terminal gives: display: :0.0 screen: 0 OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301) OpenGL version string: 1.4 (2.1 Mesa 9.0.3) What am I doing wrong here? All help appreciated ;) Edit: I have tried the legacy driver from www2.ati.com/drivers/linux/amd-driver-installer-catalyst-13-4-linux-x86.x86_64.zip I also tried the guide at https://launchpad.net/~makson96/+archive/fglrx which caused the system to crash (blackscreen, no boot) Neither seemed to work. I did however reinstall ubuntu 12.04 LTS, and re-tried both with no success. Reintalling ubuntu did however fix the broken dependencies problems, etc.

  Read the article

• nVidia 9800 GTX+ X11 fails to initialize. no unity or lightdm

  - by rlemon

  I have just upgraded my work pc to 12.04 (not upgrade, fresh install), installing updates during the install, and after everything has loaded (with no errors) and I restart I get brought to console 1 tty login. Console 7 looks like this: IIRC I did not have to finagle with my drivers on 11.10 to get this card working. If this is in fact a driver bug I will remove this post and submit the bug but i'm not 100% confident that it is. I attempted to run unity --reset and got this: Lastly I tried $ sudo apt-get install nvidia-current which tells me nvidia-current is already the newest version. so I ran $ sudo dpkg-reconfigure nvidia-current which says /usr/sbin/dpkg-reconfigure: nvidia-current is broken or not fully installed. Anything I can try from here would be awesome. Currently the only way to get the system up and running was to shut down, plug one of my monitors into the onboard video, enable the onboard video card from the BIOS, then boot back up (and on my single monitor everything is fine). update So I have been able to boot fresh with the ext card plugged in as long as I don't take the updates with the install. past this if I only install the nvidia drivers (nvidia-current or nvidia-current-updates) from the main server (or canadian) I then get the problems.. My proposal; which I don't know where to look for: Can I try installing the previous version of this driver? In the past, on another machine I had issues with my NIC driver being funky... downgraded to the previous driver and bam everything was merry and well.

  Read the article

• OpenLDAP mirror mode replication failing with TLS behind a load balancer

  - by Lynn Owens

  I have two OpenLDAP servers that are both running TLS. They are: ldap1.mydomain.com ldap2.mydomain.com I also have a load balancer cluster with a dns name of it's own: ldap.mydomain.com The SSL certificate has a CN of ldap.mydomain.com, with SANs of ldap1.mydomain.com and ldap2.mydomain.com. Everything works... Except mirror mode replication. My mirror mode replication is setup like this: ldap.conf TLS_REQCERT allow cn=config.ldif olcServerID: 1 ldap://ldap1.mydomain.com olcServerID: 2 ldap://ldap2.mydomain.com On ldap1, olcDatabase{1}hdb.ldif olcMirrorMode: TRUE olcSyncrepl: {0}rid=001 provider=ldap://ldap2.mydomain.com bindmethod=simple bindmethod=simple binddn="cn=me,dc=mydomain,dc=com" credentials="REDACTED" starttls=yes searchbase="dc=mydomain,dc=com" schemachecking=on type=refreshAndPersist retry="60 +" On ldap2, olcDatabase{1}hdb.ldif olcMirrorMode: TRUE olcSyncrepl: {0}rid=001 provider=ldap://ldap1.mydomain.com bindmethod=simple bindmethod=simple binddn="cn=me,dc=mydomain,dc=com" credentials="REDACTED" starttls=yes searchbase="dc=mydomain,dc=com" schemachecking=on type=refreshAndPersist retry="60 +" Here's the errors I'm getting in syslog: Dec 1 21:05:01 ldap1 slapd[6800]: slap_client_connect: URI=ldap://ldap2.mydomain.com DN="cn=me,dc=mydomain,dc=com" ldap_sasl_bind_s failed (-1) Dec 1 21:05:01 ldap1 slapd[6800]: do_syncrepl: rid=001 rc -1 retrying Dec 1 21:05:08 ldap1 slapd[6800]: conn=1111 fd=20 ACCEPT from IP=ldap.mydomain.com:2295 (IP=ldap1.mydomain.com:636) Dec 1 21:05:08 ldap1 slapd[6800]: conn=1111 fd=20 closed (TLS negotiation failure) Any ideas? I've been working on OpenLdap for way too long now.

  Read the article

• BAD ARCHIVE MIRROR using PXE BOOT method

  - by omkar

  i m trying to automatically install UBUNTU on a client PC by using the method of PXE BOOT method....my Objectives are below:- i m following the steps given in this link installation using PXE BOOT INSTALL 1:-the server will have a KICKSTART config file which contains the parameters for the OS installation and the files which are required for the OS installations. 2:-the client will have to detect this configuration along with the setup files and complete the installation without any input from the user. In my server i have installed DHCP3-server,Apache2 and TFTP for helping me with the installation. i have nearly achieved my first objective,i m able to boot my client using the files stored in the server,but during the installation stage it is asking me to "CHOOSE A MIRROR of UBUNTU ARCHIVE".i gave the server's IP address and the path in the server where the files are located but then too its giving me error "BAD ARCHIVE MIRROR". so is it possible that instead of downloading all the files from the internet and storing them on my disk , can i use the files which comes with the UBUNTU-CD, and how to store this files in what format (should i zip them ) on the disk. secondly i am also generating the ks.cfg which i wanted to give to the client for automatic installation of the OS ,so how should the configuration file be given to the installation process.

  Read the article

• Mirror your display to another computer on your network

  - by klikkamongo

  I have a computer I am using for showing media, running windows 7 (XBMC). It is hooked up with a projector. I want other computers on my network to have the opportunity to mirror their display to this computer.(without the media computer having to accept it, it should be all controlled by the sending computer.(like sending a movie with Apple's Airplay)) One scenario: I am finding a webpage with a great article (or a Word document) on my computer that i want to show to the other people in the room, i press a button, then my screen is mirrored to the media pc. I can still scroll, write etc. so everybody can see it. When i am done showing the article, I can exit the display mirroring, and the media computer display goes back to normal. This should mirror the whole screen, not only the browser like plugins can do in chrome, or sending Youtube movies like plugins for Opera. Update I found a video example of the solution I am looking for, unfortunately it looks like it will be hard making a Chromecast reciever for windows. Using the "Cast entire screen (experimentally)" button on the Chromecast plugin in Chrome is doing the exact thing I want to do, see this video.

  Read the article

• p410i Mirror failed couldnt find same disk

  - by Heishiro Mitsurugi

  I have an HP server with an P410i RAID Card installed. I had two SATA Drives connected (250GB each). The RAID was configured as a Mirror. A few days ago the drive one (1) failed, and i had to remove it. Tried to find the same part number here in Venezuela, but i couldn't. So, i bought a 500GB SATA Drive, and connected it to the same bay where the 250GB failed drive was. When the server booted, it asked me if i wanted to rebuild the data. I selected the option for that, and Windows Server restarted properly. When i got into the ACU (Array Configuration Utility) it told me that it was rebuilding the data. Today the warning went away, and according to the ACU everything is just fine. My question is... What i did was right? Can i create a mirror from a 250GB disk in a 500GB disk using the p410i? I have done that before, but only using software RAID in Windows, and it just uses the space it needs. As a matter of fact, when did that using Windows i was able to use the remaining space in the bigger drive, but in the p410i i can't use it. Should i be worried? Thanks a lot in advance for any pointers or info that you could give on this. Heishiro

  Read the article

• How to backup mirror copies of C: drive?

  - by metal gear solid

  I've installed everything on my C: Drive . Whatever i need Windows 7, updated drivers and utilities and software etc i need. I now i want to take a backup mirror of everything in a DVD or i can keep backup in another USB HDD. so in case if i face any windows or hard-drive failure in future then i can restore everything as it is as all are today. I don't want to reinstall everything again Windows, Drivers all utilities and all needed soft-wares. My C: Drive's total capacity is 108 GB but data on c: drive is only 12 GB. What Should i do ? What is the best solution for me? I need free solution.

  Read the article

• Can't set correct desktop resolution on Windows 7 after playing Mirror's Edge

  - by DeadMG

  Ever since I launched Mirror's Edge, my entire system seems to think that my monitor is 1600x1200, when actually it's 1920x1080. The game would only go up to 1600x1200, Windows will only go up to 1600x1200, and even my video drivers will only go up that high. The monitor isn't even that aspect ratio. I've rebooted the system to no effect, and installed the latest graphics drivers for my Radeon 5770, unplugged it and re-plugged it, etc. My secondary screen is still working perfectly correctly. Any suggestions?

  Read the article

• Virtual drivers with Windows Driver Model - where to begin?

  - by waitinforatrain

  I've never written drivers before but I'm starting an open-source project that involves creating virtual MIDI ports that will send the MIDI data over a network. For this, I presume I would be creating some sort of virtual driver using WDM (unless it's possible with kernel hooks?) - but being a beginner to driver development I don't know where to begin. Does anyone know any useful resources that would help me with this project? Or some open-source code from a similar project that I could fork as a starting point?

  Read the article

• Which Xorg driver (not kernel driver) to use with GMA500/Poulsbo video hardware in 12.04

  - by Somejan

  I have a Asus EeePC with a GMA500 video card. I followed the instructions on https://wiki.ubuntu.com/HardwareSupportComponentsVideoCardsPoulsbo/, which made the netbook boot correctly. Without any xorg.conf file, Xorg uses the VESA driver, which is quite slow. Manually specifying fbdev as driver in xorg.conf also works. Which one should I use? Are there any other drivers for Xorg that do better at 2d accelleration (since the kernel driver doesn't support 3d acceleration)?

  Read the article

• Broadcom BCM4331 not working on new Mac Mini 5,1

  - by Jon

  I can't seem to get my wireless card working on my Mac Mini 5,1. Lspci returns: 03:00.0 Network controller: Broadcom Corporation BCM4331 802.11a/b/g/n (rev 02) But running "additional drivers" doesn't detect anything. The nm-applet menu reads "device not ready--firmware missing." What can I do to get this to work? Note, this is with 12.04.1, so many of the previous discussions (for 11.10, etc) probably don't apply here.

  Read the article

• Lenovo G580 video driver does not work

  - by Evgeniy

  I have trouble with video driver. In my laptop, I have 2 video cards: GeForce 630M and Intel HD 4000 Series. I installed 12.04, it starts in Unity 2D mode, I try to install drivers to both video cards, but results inefficiencies. Nvidia control panel propose me to create xorg config file manually, but after this screen resolution resets to 640x480 and I can't get it back to normal mode. Please, help me if this is possible.

  Read the article

• Xorg.conf (nvidia) Second Monitor getting settings of first

  - by HennyH

  I've been spending the weekend (and some time before that) trying to set up my Korean QHD270 and Benq G2222HDL monitors with Ubuntu 13.10. With the nouveau drivers install both monitor function perfectly fine. After installing the nvidia drivers the Benq works but the QHD270 does not. Now, after days of struggling I managed to get the QHD270 to work following a mixture of blogs, particularly; this one and learnitwithme. Now, unfortunatly my G2222HDL does not work. I fixed the QHD270 by supplying a custom EDID, my xorg.conf looks like so (excluding keyboard and mouse): Section "ServerLayout" Identifier "Layout0" Screen "Default Screen" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Section "Device" Identifier "Configured Video Device" Driver "nvidia" Option "CustomEDID" "DFP:/etc/X11/edid-shimian.bin" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" EndSection Now, I tried defining a new Device,Monitor and Screen then in ServerLayout adding Screen "Second Screen" RightOf "Default Screen", but after doing so neither monitor worked. Hoping to fix the issue using a GUI based tool I opened up NVIDIA X Server Settings, which shows my current layout as: It seems that something is being output to the monitor, as suggested by my print screen: Any help would be greatly appreciated. Output of xrandr: Screen 0: minimum 8 x 8, current 5120 x 1440, maximum 16384 x 16384 DVI-I-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 connected primary 2560x1440+0+0 (normal left inverted right x axis y axis) 597mm x 336mm 2560x1440 60.0*+ HDMI-0 disconnected (normal left inverted right x axis y axis) DP-0 disconnected (normal left inverted right x axis y axis) DVI-D-0 connected 2560x1440+2560+0 (normal left inverted right x axis y axis) 597mm x 336mm 2560x1440 60.0*+ DP-1 disconnected (normal left inverted right x axis y axis) And an extract from my log file (perhaps this is relevant?) [ 7.862] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 680 at PCI:2:0:0 [ 7.862] (--) NVIDIA(0): CRT-0 [ 7.862] (--) NVIDIA(0): ACB QHD270 (DFP-0) (boot, connected) [ 7.862] (--) NVIDIA(0): DFP-1 [ 7.862] (--) NVIDIA(0): DFP-2 [ 7.862] (--) NVIDIA(0): DFP-3 [ 7.862] (--) NVIDIA(0): DFP-4 [ 7.862] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): ACB QHD270 (DFP-0): 330.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): ACB QHD270 (DFP-0): Internal Dual Link TMDS [ 7.862] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS [ 7.862] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS [ 7.862] (--) NVIDIA(0): DFP-3: 330.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-3: Internal Single Link TMDS [ 7.862] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock [ 7.862] (--) NVIDIA(0): DFP-4: Internal DisplayPort

  Read the article

• How to get D-Link DWA-547 working on Ubuntu 13.10?

  - by Tan Kah Ping

  I got a D-Link DWA-547 Wifi card which is supposed to work out-of-the-box with Linux. Says so here: http://wireless.kernel.org/en/users/Drivers/ath9k/products/external While lspci does list the device, NetworkManager doesn't seem to allow me to configure Wifi. lsmod also shows that ath9k isn't loaded. Manually loading with 'modprobe ath9k' doesn't help. How do I get this card working on Ubuntu 13.10 64-bit?

  Read the article

• Microphone not recognised on my TekNmotion Intruder headset?

  - by Mitch Gardner

  I own a TekNmotion Intruder headset and Ubuntu 12.04 doesn't seem to even notice that my mic exists. I just re-installed Ubuntu and that doesn't seem to help either. They are a bit of a no-name brand and I can't find drivers for them. The audio plays clearly through the head phones but my mic wont record using "Record my desktop", Works rarely with Skype, and doesn't even show up when I go to Sound Settings ---- Input. Help please!

  Read the article

• m not able to connect to wifi network

  - by Broken Heart

  i had tried every code every idea every thing but i failed wiireless driver broadcom bcm43412 but when i checked pci-id it show not supported my pci id is 14e4:4365 and chip id is BCM43142 i tried edit connection myself to olso but i cannt wat to put in clone mac adress place? device mac adress is the router mac adress but what is clone mac adress i had placed my laptop mac adress in place of clone mac adress bt it doesnot work tried every thing but it not work checked additional driver by going system settings it doesnot contain any drivers,tried internet by cable then it connects then how sholud i correct this plz tell

  Read the article

• Find out monitor make / model

  - by thefragileomen

  My friend has recently bought a second-hand vehicle with an in-car computer and it's wired up to a touchscreen monitor on the dashboard (very impressive!). Now, I've helped him install Ubuntu on it today but we can't establish the make and model of the connected touchscreen monitor to try and source the drivers to make the touchscreen function work. Are there any Linux commands to work out the make / model of an attached monitor? I've tried Google which pointed me towards the /etc/X11 directory but have had no joy with that.

  Read the article

• Broadcom device 4365 wireless driver for 12.04

  - by NilPointer

  My laptop (Dell Inspiron 17R 5720) came with preinstalled Ubuntu 11.10. I removed it and installed 12.04. Now I can't find driver for wireless. Apparently, in 11.10 there was Broadcom-STA driver. But in 12.04 there is no additional drivers to install. I tried using: sudo m-a a-i broadcom-sta But building fails on 26%. How can I install driver According to lspci i got: Broadcom Corporation Device 4365 (rev 01)

  Read the article

• Bluetooth not finding any devices on 12.10

  - by DeanGrobler

  When I switch on my bluetooth and search for devices my laptop doesn't find any even though there's plenty in the area. Most likely this is because of drivers that are missing. So what I want to know is if there's a way I can view the exact details of what bluetooth device I have built into my laptop so I can start searching for a linux version of the needed driver. Any tips? PS - Running 64bit 12.10

  Read the article

• Installing NVIDIA driver causes black screen (750M)

  - by aftrumpet

  I have a dual boot set up on a Lenovo Ideapad Y500 with NVIDIA 750M and I am having problems installing the graphics cards. I have made sure to install both linux-headers-generic and linux-source, and yet have ended up with a black screen whether I install nvidia-current, nvidia-current-updates, nvidia-experimental-310, and nvidia-319. I even tried enabling proprietary drivers through settings and still ended up with a black screen on boot. Is my graphics card just not supported yet, or is there a way to fix this?

  Read the article

• Bluetooth drivers for Dell Latitude D830

  - by blomqvist

  I haven’t been using Bluetooth on my D830 before but now I got myself a Bluetooth mouse in order to get rid of the receiver for a wireless mouse. And then I discovered that Bluetooth did not work anymore after I installed Win7. Browsing Dell support pages for a a driver found me one (browsing by computer model etc..). But that drivers does not work. Installation looks ok and everything but no devices are found. i kept looking and found this driver, also at Dells site: http://support.us.dell.com/support/downloads/download.aspx?c=us&l=en&s=gen&releaseid=R231570&formatcnt=1&libid=0&typeid=-1&dateid=-1&formatid=-1&fileid=333170 And that one worked!  Problem solved an I am now happily using my Bluetooth mouse instead.

  Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >