paul rostorp - Page 18 - Developer IT

Bluetooth push application

- by Paul Kassey

I am considering the technical viability of software that I want to write. Is there a way that I can push data to a phone (iPhone or Andriod) via Bluetooth without pairing with it? I want to be able to walk into a room and have a computer push data to my phone when I get a certain distance from it, or push data to any phone automatically when it comes within a certain distance to a Bluetooth-ready device?

Read the article

How can I remove and re-install Unity?

- by Paul Girardin

Unity is misbehaving after installing GLX Dock - HUD does not open with GLX Dock turned off and there are ugly shadows in the panel,three control buttons (close,minimise,maximise) and "Ubuntu Desktop" label when there are no apps running.I have to click the top panel to get the super key to open the dash. I have tried unity --reset and unity --replace commands ,but they do not help. Can I un-install and re-install Unity?

Read the article

Question about modeling with MVC (the pattern, not the MS stuff / non web)

- by paul

I'm working on an application in which I'm looking to employ the MVC pattern, but I've come up against a design decision point I could use some help with. My application is going to deal with the design of state-machines. Currently the MVC model holds information about the machine's states, inputs, outputs, etc. The view is going to show a diagram for the machine, graphically allowing the user to add new states, establish transitions, and put the states in a pleasing arrangement, among other things. I would like to store part of the diagram's state (e.g. the x and y state positions) when the machine information is stored for later retrieval, and am wondering how best to go about structuring the model(s?) for this. It seems like this UI information is more closely related to the view than to the state-machine model, so I was thinking that a secondary model might be in order, but I am reluctant to pursue this route because of the added complexity. Adding this information to the current model doesn't seem the right way to go about it either. This is the my first time using the MVC pattern so I'm still figuring things out. Any input would be appreciated.

Read the article

USB keyboard does not load after 13.10 upgrade

- by Paul

Problem: Running kernel 3.11.0-12-generic after a Ubuntu upgrade from 13.04 to 13.10 my USB keyboard is not recognised, thus I am not able to unlock my encrypted disk. I suspect it might be related to a minimal/incorrect install of initrd. Question: How do I go about getting the newest kernel to recognise my generic USB keyboard, allowing me to unlock my encrypted disk? What I have tried: I have already re-installed the newest kernel: sudo apt-get install --reinstall linux-image-generic linux-image and I have also updated the initrd: update-initramfs -c -k 3.11.0-12-generic Back story: I just completed upgrading my Ubuntu system from 13.04 to 13.10. When I subsequently rebooted by system I was no longer able to enter my encryption password (passphrase) as the keyboard drivers did not load. Temporary workaround: Earlier in the boot process (before the keyboard stops working) I was able to enter GRUB menu were I choose to boot from an older kernel (3.8.0-31-generic) which did load the USB keyboard drivers. This is currently the kernel I am running. Thanks

Read the article

/build folder used by PEAR

- by Paul

I've just noticed a root directory (/build) which I can't seem to find any information for. It looks like it's some sort of staging ground for PEAR (PHP). There are only two folders of different php versions in it, and each of those has a few PEAR tar files I've installed (via the PEAR command line). I'm really only asking this question because I find is strange PEAR (and only PEAR) would create its own root directory to store files. Is this normal? Does Ubuntu provide a /build directory for applications to use?

Read the article

AdventureWorks2014 installation script

- by John Paul Cook

The AdventureWorks2014 sample database is downloadable from here . If you choose to run the script and are unfamiliar with sqlcmd, this post shows you what to do. Be sure to extract the zip file’s contents to a new folder because the instawdb.sql comes with 72 csv files that contain the actual data. If you specify a folder other than the default, you’ll have to change a path in the instawdb.sql script to point to your directory. Figure 1. instawdb.sql script file in SSMS. Notice the 3 lines that...(read more)

Read the article

After Java un installation my system settings were vanished.

- by Paul

After my Java un installation, my system settings were gone. When I click on my system settings, I am not getting anything. For a long back I re-install my Java, so i don't remember which command I used to un-install my Java. Now I am not able to see my date and time settings and my shared folders are also not in sharing. Can anybody tell to me what gone wrong in my Java un-installation and how can I get back them.

Read the article

When do I bite the bullet and hire a developer? [closed]

- by Paul Seattle

I have an awesome URL, I've had it since the mid 90's, and up until around 2002 I was having an awesome time writing music reviews and features into static pages and adding their URL to static index pages and everything was just great. Then things got complicated really fast, and for one reason or another I handed the site over to a very talented friend who turned it into a db based site run by cf. Now, here I am around twelve years later putting it all back together using mysql, php and css on a need-to-learn basis and even though I'm sooo close to where I want it to be I realize, erm, it should have been written using mysqli etc etc ad infinitum. So I'm wondering at what point do I just give in and hire a developer to take over, how much does it even cost, and how do I know I'm working with someone who is better than I am?

Read the article

Is this a violation of the Liskov Substitution Principle?

- by Paul T Davies

Say we have a list of Task entities, and a ProjectTask sub type. Tasks can be closed at any time, except ProjectTasks which cannot be closed once they have a status of Started. The UI should ensure the option to close a started ProjectTask is never available, but some safeguards are present in the domain: public class Task { public Status Status { get; set; } public virtual void Close() { Status = Status.Closed; } } public ProjectTask : Task { public override void Close() { if (Status == Status.Started) throw new Exception("Cannot close a started Project Task"); base.Close(); } } Now when calling Close() on a Task, there is a chance the call will fail if it is a ProjectTask with the started status, when it wouldn't if it was a base Task. But this is the business requirements. It should fail. Can this be regarded as a violation?

Read the article

No Mouse Pointer - ubuntu 13.10

- by Paul

just installed 13.10 on my HP Envy M6 laptop and have no mouse pointer. My USB mouse does not work and neither does the track pad. When I booted from a USB key everything worked OK but once installed it seems to have broken the mouse. Unlike other posts, there is no flicker, it simply doesn't work at all. My laptop is an i5 with 6gb and dual Intel and AMD radeon graphics. Any help would be gratefully received as I really can't stand Windows 8 any longer. Thanks.

Read the article

Cookie Settings Storage Method

- by Paul

I've got an web app that needs to store some non-sensitive preferences for the user. Right now I'm storing their language preference and what mode they want a window opened in by default in two cookies: "lang" can be "en" or "de" "mode" can be "design" or "view" I might add a few more in the future. I'm not sure how many, but probably never more than a dozen. Language is parsed on every request, whereas the mode cookie is only used occasionally. I saw a recommendation that made sense I shouldn't try to do what I was originally planning to do and strongly type a user settings class deserialized on each request because of the overhead involved. I see three options here and I'm not sure which is the best overall. Keep things as they are, add a new cookie for each new setting Combine the cookies into a single settings cookie and add future values to it Change the mode cookie to settings (leaving language alone), add new user settings values to the settings cookie All would work obviously. I'm leaning toward option three, but I'm not sure if there's a best practice for this?

Read the article

ASIHttpRequest problems. "unrecognized selector sent to instance"

- by Paul Peelen

Hi, I am experiencing problems using ASIHttpRequst. This is the error I get: 2010-04-11 20:47:08.176 citybikesPlus[5885:207] *** -[CALayer rackDone:]: unrecognized selector sent to instance 0x464a890 2010-04-11 20:47:08.176 citybikesPlus[5885:207] *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[CALayer rackDone:]: unrecognized selector sent to instance 0x464a890' 2010-04-11 20:47:08.176 citybikesPlus[5885:207] Stack: ( 33936475, 2546353417, 34318395, 33887862, 33740482, 126399, 445238, 33720545, 33717320, 40085013, 40085210, 3108783, 11168, 11022 ) And this is my code (Part of it): // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { [image setImage:[UIImage imageNamed:@"bullet_rack.png"]]; BikeAnnotation *bike = [[annotationView annotation] retain]; bike._sub = @""; [super viewDidLoad]; NSString *newUrl = [[NSString alloc] initWithFormat:rackUrl, bike._id]; NSString *fetchUrl = [newUrl stringByAddingPercentEscapesUsingEncoding:NSUTF8StringEncoding]; [networkQueue cancelAllOperations]; [networkQueue setRequestDidFinishSelector:@selector(rackDone:)]; [networkQueue setRequestDidFailSelector:@selector(processFailed:)]; [networkQueue setDelegate:self]; ASIFormDataRequest *request = [[[ASIFormDataRequest alloc] initWithURL:[NSURL URLWithString:fetchUrl]] retain]; [request setDefaultResponseEncoding:NSUTF8StringEncoding]; [networkQueue addOperation:request]; [networkQueue go]; } - (void)rackDone:(ASIHTTPRequest *)request { NSString *resultSearch = [request responseString]; NSData *data = [resultSearch dataUsingEncoding:NSUTF8StringEncoding]; NSString *errorDesc = nil; NSPropertyListFormat format; NSDictionary * dict = (NSDictionary*)[NSPropertyListSerialization propertyListFromData:data mutabilityOption:NSPropertyListMutableContainersAndLeaves format:&format errorDescription:&errorDesc]; rackXmlResult* fileResult = [[[rackXmlResult alloc] initWithDictionary:dict] autorelease]; rackXmlSet *rackSet = [fileResult getRackResult]; NSString *subString = [[NSString alloc] initWithFormat:@"Cyklar tillgängligt: %@ -- Lediga platser: %@", rackSet._ready_bikes, rackSet._empty_locks]; [activity setHidden:YES]; [image setHidden:NO]; BikeAnnotation *bike = [annotationView annotation]; bike._sub = subString; } - (void) processFailed:(ASIHTTPRequest *)request { UIAlertView *errorView; NSError *error = [request error]; NSString *errorString = [error localizedDescription]; errorView = [[UIAlertView alloc] initWithTitle: NSLocalizedString(@"Network error", @"Network error") message: errorString delegate: self cancelButtonTitle: NSLocalizedString(@"Close", @"Network error") otherButtonTitles: nil]; [errorView show]; [errorView autorelease]; } The process is loaded as LeftCalloutView in the callout bubble when annotations are loaded in my mapview, so quite a lot (80 times or so). It is meant to retrieve a XML Plist from a server, parse it and use the data... but it dies at the rackDone: Does anybody have any ideas? Regards, Paul Peelen

Read the article

Potential issues using member's "from" address and the "sender" header

- by Paul Burney

Hi all, A major component of our application sends email to members on behalf of other members. Currently we set the "From" address to our system address and use a "Reply-to" header with the member's address. The issue is that replies from some email clients (and auto-replies/bounces) don't respect the "Reply-to" header so get sent to our system address, effectively sending them to a black hole. We're considering setting the "From" address to our member's address, and the "Sender" address to our system address. It appears this way would pass SPF and Sender-ID checks. Are there any reasons not to switch to this method? Are there any other potential issues? Thanks in advance, -Paul Here are way more details than you probably need: When the application was first developed, we just changed the "from" address to be that of the sending member as that was the common practice at the time (this was many years ago). We later changed that to have the "from" address be the member's name and our address, i.e., From: "Mary Smith" <[email protected]> With a "reply-to" header set to the member's address: Reply-To: "Mary Smith" <[email protected]> This helped with messages being mis-categorized as spam. As SPF became more popular, we added an additional header that would work in conjunction with our SPF records: Sender: <[email protected]> Things work OK, but it turns out that, in practice, some email clients and most MTA's don't respect the "Reply-To" header. Because of this, many members send messages to [email protected] instead of the desired member. So, I started envisioning various schemes to add data about the sender to the email headers or encode it in the "from" email address so that we could process the response and redirect appropriately. For example, From: "Mary Smith" <[email protected]> where the string after "messages" is a hash representing Mary Smith's member in our system. Of course, that path could lead to a lot of pain as we need to develop MTA functionality for our system address. I was looking again at the SPF documentation and found this page interesting: http://www.openspf.org/Best_Practices/Webgenerated They show two examples, that of evite.com and that of egreetings.com. Basically, evite.com is doing it the way we're doing it. The egreetings.com example uses the member's from address with an added "Sender" header. So the question is, are there any potential issues with using the egreetings method of the member's from address with a sender header? That would eliminate the replies that bad clients send to the system address. I don't believe that it solves the bounce/vacation/whitelist issue since those often send to the MAIL FROM even if Return Path is specified.

Read the article

asp.net Multiple Page_Load events for a user control when using URL Routing

- by Paul Hutson

Hello, I've recently set up an ASP.net site (not using MVC.net) to use URL Routing (more on the code below) - when using user controls on the site (i.e I've created a "menu" user control to hold menu information) the page_load event for that control will fire twice when URLs have more than one variable passed over. i.e. pageName/VAR1 : will only fire the page_load event once. while pageName/VAR1/VAR2 : will fire the page_load event twice. *Multiple extra VARs added on the end will still only fire the page_load event twice*. Below are the code snippits from the files, the first is the MapPageRoute, located in the Global.asax : // Register a route for the Example page, with the NodeID and also the Test123 variables allowed. // This demonstrates how to have several items linked with the page routes. routes.MapPageRoute( "Multiple Data Example", // Route name "Example/{NodeID}/{test123}/{variable}", // Route URL - note the NodeID bit "~/Example.aspx", // Web page to handle route true, // Check for physical access new System.Web.Routing.RouteValueDictionary { { "NodeID", "1" }, // Default Node ID { "test123", "1" }, // Default addtional variable value { "variable", "hello"} // Default test variable value } ); Next is the way I've directed to the page in the menu item, this is a list item within a UL tag : <li class="TopMenu_ListItem"><a href="<%= Page.GetRouteUrl("Multiple Data Example", new System.Web.Routing.RouteValueDictionary { { "NodeID", "4855" }, { "test123", "2" } }) %>">Example 2</a></li> And finally the control that gets hit multiple times on a page load : // For use when the page loads. protected void Page_Load(object sender, EventArgs e) { // Handle the routing variables. // this handles the route data value for NodeID - if the page was reached using URL Routing. if (Page.RouteData.Values["NodeID"] != null) { nodeID = Page.RouteData.Values["NodeID"] as string; }; // this handles the route data value for Test123 - if the page was reached using URL Routing. if (Page.RouteData.Values["Test123"] != null) { ExampleOutput2.Text = "I am the output of the third variable : " + Page.RouteData.Values["Test123"] as string; }; // this handles the route data value for variable - if the page was reached using URL Routing. if (Page.RouteData.Values["variable"] != null) { ExampleOutput3.Text = "I say " + Page.RouteData.Values["variable"] as string; }; } Note, that when I'm just hitting the page and it uses the default values for items, the reloads do not happen. Any help or guidance that anyone can offer would be very much appreciated! EDIT : The User Control is only added to the page once. I've tested the load sequence by putting a breakpoint in the page_load event - it only hits twice when the extra routes are added. Thanks in Advance, Paul Hutson

Read the article

SQLUG Events - London/Edinburgh/Cardiff/Reading - Masterclass, NoSQL, TSQL Gotcha's, Replication, BI

- by tonyrogerson

We have acquired two additional tickets to attend the SQL Server Master Class with Paul Randal and Kimberly Tripp next Thurs (17th June), for a chance to win these coveted tickets email us ([email protected]) before 9pm this Sunday with the subject "MasterClass" - people previously entered need not worry - your still in with a chance. The winners will be announced Monday morning.As ever plenty going on physically, we've got dates for a stack of events in Manchester and Leeds, I'm looking at Birmingham if anybody has ideas? We are growing our online community with the Cuppa Corner section, to participate online remember to use the #sqlfaq twitter tag; for those wanting to get more involved in presenting and fancy trying it out we are always after people to do 1 - 5 minute SQL nuggets or Cuppa Corners (short presentations) at any of these User Group events - just email us [email protected] removing from this email list? Then just reply with remove please on the subject line.Kimberly Tripp and Paul Randal Master Class - Thurs, 17th June - LondonREGISTER NOW AND GET A SECOND REGISTRATION FREE*The top things YOU need to know about managing SQL Server - in one place, on one day - presented by two of the best SQL Server industry trainers!This one-day MasterClass will focus on many of the top issues companies face when implementing and maintaining a SQL Server-based solution. In the case where a company has no dedicated DBA, IT managers sometimes struggle to keep the data tier performing well and the data available. This can be especially troublesome when the development team is unfamiliar with the affect application design choices have on database performance.The Microsoft SQL Server MasterClass 2010 is presented by Paul S. Randal and Kimberly L. Tripp, two of the most experienced and respected people in the SQL Server world. Together they have over 30 years combined experience working with SQL Server in the field, and on the SQL Server product team itself. This is a unique opportunity to hear them present at a UK event which will:>> Debunk many of the ingrained misconceptions around SQL Server's behaviour >> Show you disaster recovery techniques critical to preserving your company's life-blood - the data >> Explain how a common application design pattern can wreak havoc in the database >> Walk through the top-10 points to follow around operations and maintenance for a well-performing and available data tier! Where: Radisson Edwardian Heathrow Hotel, LondonWhen: Thursday 17th June 2010*REGISTER TODAY AT www.regonline.co.uk/kimtrippsql on the registration form simply quote discount code: BOGOF for both yourself and your colleague and you will save 50% off each registration – that’s a 249 GBP saving! This offer is limited, book early to avoid disappointment.Wed, 23 JunREADINGEvening Meeting, More info and registerIntroduction to NoSQL (Not Only SQL) - Gavin Payne; T-SQL Gotcha's and how to avoid them - Ashwani Roy; Introduction to Recency Frequency - Tony Rogerson; Reporting Services - Tim LeungThu, 24 JunCARDIFFEvening Meeting, More info and registerAlex Whittles of Purple Frog Systems talks about Data warehouse design case studies, Other BI related session TBC Mon, 28 JunEDINBURGHEvening Meeting, More info and registerReplication (Components, Adminstration, Performance and Troubleshooting) - Neil Hambly Server Upgrades (Notes and Best practice from the field) - Satya Jayanty Wed, 14 JulLONDONEvening Meeting, More info and registerMeeting is being sponsored by DBSophic (http://www.dbsophic.com/download), database optimisation software. Physical Join Operators in SQL Server - Ami LevinWorkload Tuning - Ami LevinSQL Server and Disk IO (File Groups/Files, SSD's, Fusion-IO, In-RAM DB's, Fragmentation) - Tony RogersonComplex Event Processing - Allan MitchellMany thanks,Tony Rogerson, SQL Server MVPUK SQL Server User Grouphttp://sqlserverfaq.com"

Read the article

What 5 things should SQL Server get rid of?

- by BuckWoody

I’ve been “tagged” by my friend Paul Randal. It’s a high-tech way of making someone else do what you want, but since it’s Paul, well, I guess I’m OK with that. He’s asked in his recent blog entry “What five things would you get rid of in SQL Server if you were in charge?” This is, of course, a delicate issue. After all, I work at Microsoft, so anything I say here might be taken as a criticism that would require action – but of course it really doesn’t. Interestingly, you may have more to do with what goes in to SQL Server than I did even as a Program Manager where I “owned” a feature. Unlike many places I’ve worked, Microsoft really does drive its products by what its users want – not every time, and not every user request, mind you, but overall I think we hit the mark pretty well. So, with all of that said, and of course the obligatory statement of “these are my own opinions, and have nothing to do with any official Microsoft position in any way, and do not reflect the opinions of other Microsoft employees or management”, here goes. 1. Get rid of SQL Server Management Studio Does that surprise you? After all, when I was a Program Manager, I actually owned the general architecture for SSMS. But those on my team probably would have been able to guess this one for you. I think that SSMS is a fine development tool. But I think that it does less of a good job for managing a system. It’s based on Visual Studio, probably one of the best development IDE’s around. And when I develop code, I really like it. But for a monitoring/management tool, I prefer a snap-in to the Microsoft Management Console (MMC). I know, the old one (prior to 3.0) was kludgy, difficult to use and program in. But that’s changed. Of course, when I bring this up, you’ll probably immediately say “But I don’t have that in XP.” And that’s one of the reasons we didn’t go there. (But I still don’t like SSMS for management.) 2. ShrinkDB I think this discussion has been done to death, so I’ll leave it at that. 3. SQL Server Agent Does that one surprise you as well? In my mind, since we ALWAYS ride on Windows, just use the task scheduler there, along with PowerShell. You could log the results in Windows logs, files, back into SQL Server, whatever. It’s just a complexity we don’t need in SQL Server. 4. SQL Server Error Logs We have a full logging setup in Windows. They’re well done, easy to understand and ubiquitous. We should just use that. 5. Several SKU’s I won’t say which, but we have a few SKU’s of SQL Server that need to go. And we need to figure out how to help you understand clearly where you need to go to Enterprise or Data Center. Most folks are trying to push Standard edition to do things it isn’t designed to do, and then they think SQL Server won’t scale. I think we can do a better job of showing you where Standard Edition will hit the wall, and I think with fewer choices it would be pretty simple for you to pick the right one. Well, once again I’ve probably puzzled some folks and angered others. I think my work here is done. :) Back to you, Paul. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

SQL Syntax to count unique users completing a task

- by Belliez

I have the following code which shows me what users has completed ticket and this lists each user and the date they close a ticket. i.e. Paul Matt Matt Bob Matt Paul Matt Matt At the moment I manually count each user myself to see their totals for the day. EDIT: Changed output as columns instead of rows: What I have been trying to do is get SQL Server to do this for me i.e. the final result to look like: Paul | 2 Matt | 5 Bob | 1 My code I am currently using is and I would be greatful if someone can help me change this so I can get it outputting something similar to above? DECLARE @StartDate DateTime; DECLARE @EndDate DateTime; -- Date format: YYYY-MM-DD SET @StartDate = '2013-11-06 00:00:00' SET @EndDate = GETDATE() -- Today SELECT (select Username from Membership where UserId = Ticket.CompletedBy) as TicketStatusChangedBy FROM Ticket INNER JOIN TicketStatus ON Ticket.TicketStatusID = TicketStatus.TicketStatusID INNER JOIN Membership ON Ticket.CheckedInBy = Membership.UserId WHERE TicketStatus.TicketStatusName = 'Completed' and Ticket.ClosedDate >= @StartDate --(GETDATE() - 1) and Ticket.ClosedDate <= @EndDate --(GETDATE()-0) ORDER BY Ticket.CompletedBy ASC, Ticket.ClosedDate ASC Thank you for your help and time.

Read the article

Aggregate survey results recursively by manager

- by Ian Roke

I have a StaffLookup table which looks like this. UserSrn | UserName | ManagerSrn =============================== ABC1 | Jerome | NULL ABC2 | Joe | ABC1 ABC3 | Paul | ABC2 ABC4 | Jack | ABC3 ABC5 | Daniel | ABC3 ABC6 | David | ABC2 ABC7 | Ian | ABC6 ABC8 | Helen | ABC6 The staff structure looks like this. |- Jerome | |- Joe || ||- Paul ||| |||- Jack ||| |||- Daniel || ||- David ||| |||- Ian ||| |||- Helen I have a list of SurveyResponses that looks like this. UserSrn | QuestionId | ResponseScore ==================================== ABC2 | 1 | 5 ABC2 | 3 | 4 ABC4 | 16 | 3 ... What I am trying to do sounds pretty simple but I am struggling to find a neat, quick way of doing it. I want to create a sproc that takes an Srn and returns back all the staff under that Srn in the structure. If there is a score for QuestionId of 16 then that indicates a completed survey. I would like to return a line for the Srn entered (The top manager) with a count of completed surveys for the direct reports under that manager. Under that I would like each manager under the original manager with a count of completed surveys for each of their direct reports and so on. I would like to see the data as such below when I set the top manager to be Joe (ABC2). UserName | Completed | Total ============================ Joe | 2 | 2 Paul | 1 | 2 David | 0 | 2 TOTAL | 3 | 6

Read the article

SQL View with Data from two tables

- by Alex

Hello! I can't seem to crack this - I have two tables (Persons and Companies), and I'm trying to create a view that: 1) shows all persons 2) also returns companies by themselves once, regardless of how many persons are related to it 3) orders by name across both tables To clarify, some sample data: (Table: Companies) Id Name 1 Banana 2 ABC Inc. 3 Microsoft 4 Bigwig (Table: Persons) Id Name RelatedCompanyId 1 Joe Smith 3 2 Justin 3 Paul Rudd 4 4 Anjolie 5 Dustin 4 The output I'm looking for is something like this: Name PersonName CompanyName RelatedCompanyId ABC Inc. NULL ABC Inc. NULL Anjolie Anjolie NULL NULL Banana NULL Banana NULL Bigwig NULL Bigwig NULL Dustin Dustin Bigwig 4 Joe Smith Joe Smith Microsoft 3 Justin Justin NULL NULL Microsoft NULL Microsoft NULL Paul Rudd Paul Rudd Bigwig 4 As you can see, the new "Name" column is ordered across both tables (the company names appear correctly in between the person names), and each company appears exactly once, regardless of how many people are related to it. Can this even be done in SQL?! P.S. I'm trying to create a view so I can use this later for easy data retrieval, fulltext indexing and make the programming side simpler by just querying the view.

Read the article

Ruby Debug IDE error : ruby-debug-ide-0.4.9/lib/ruby-debug-ide.rb:109:in `debug_load'

- by Paul

I hope someone can assist me. I have RubyMine 2.0.2 installed on Windows 7 32 bit computer. Since a week ago (I presume it must have been after I have update some gems) I cant seem to debug form the IDE. I am trying to debug a rake task which I could before. Running the rake task normally works perfect, just debug doesnt. Its not just limited to the rake, I cant debug any ruby files. I've tried installing older versions of debug-ide and debug-base but to no success. I've tried it with ruby 1.8.7 and 1.8.6 on different computers but nothing. Trying to search the web gave some information, which I've tried, but also no success. Im desperate to get this working. Below are the full error and my current settings: Error: C:\InstantRails\ruby\bin\ruby.exe -e STDOUT.sync=true;STDERR.sync=true;load($0=ARGV.shift) C:\InstantRails\ruby\bin/rdebug-ide --port 57167 -- C:/InstantRails/rails_apps/paperserve/lib/tasks/poll_snmp.rake Fast Debugger (ruby-debug-ide 0.4.9) listens on :57167 C:/InstantRails/rails_apps/paperserve/lib/tasks/poll_snmp.rake:5 C:/InstantRails/ruby/lib/ruby/gems/1.8/gems/ruby-debug-ide-0.4.9/lib/ruby-debug ide.rb:109:in `debug_load' C:/InstantRails/ruby/lib/ruby/gems/1.8/gems/ruby-debug-ide-0.4.9/lib/ruby-debug ide.rb:109:in `debug_program' C:/InstantRails/ruby/lib/ruby/gems/1.8/gems/ruby-debug-ide-0.4.9/bin/rdebug-ide:87 C:\InstantRails\ruby\bin/rdebug-ide:19:in `load' C:\InstantRails\ruby\bin/rdebug-ide:19 -e:1:in `load' -e:1 Uncaught exception: undefined method `namespace' for main:Object Process finished with exit code 1 Code snippet (It fails at the start of namespace. If I remove this, it fails on the next line, etc, etc) #This script should run every 15 minutes require 'snmp' require 'yaml' namespace :cdeweb do RubyGems Environment: RUBYGEMS VERSION: 1.3.7 RUBY VERSION: 1.8.6 (2007-09-24 patchlevel 111) [i386-mswin32] INSTALLATION DIRECTORY: C:/InstantRails/ruby/lib/ruby/gems/1.8 RUBY EXECUTABLE: C:/InstantRails/ruby/bin/ruby.exe EXECUTABLE DIRECTORY: C:/InstantRails/ruby/bin RUBYGEMS PLATFORMS: ruby x86-mswin32-60 GEM PATHS: C:/InstantRails/ruby/lib/ruby/gems/1.8 C:/Users/Paul.LPFSYSTEMS/.gem/ruby/1.8 GEM CONFIGURATION: :update_sources = true :verbose = true :benchmark = false :backtrace = false :bulk_threshold = 1000 REMOTE SOURCES: http://rubygems.org/ * LOCAL GEMS * actionmailer (2.3.5, 2.0.2) actionpack (2.3.5, 2.0.2) activerecord (2.3.5, 2.0.2) activeresource (2.3.5, 2.0.2) activesupport (2.3.5, 2.0.2) capistrano (2.5.18, 2.1.0) cgi_multipart_eof_fix (2.5.0) cmdparse (2.0.2) columnize (0.3.1) fxri (0.3.7, 0.3.6) fxruby (1.6.12 mswin32) gem_plugin (0.2.3) highline(1.5.2, 1.4.0) hpricot (0.8.2 x86-mswin32, 0.6 mswin32) inaction_mailer (0.6) json (1.4.2 x86-mswin32) json_pure (1.4.2) linecache (0.43 mswin32) log4r (1.1.7, 1.0.5) mongrel (1.1.5 x86-mswin32-60, 1.1.2 mswin32) mysql(2.8.1 x86-mswin32, 2.7.3 mswin32) needle (1.3.0) net-scp (1.0.2) net-sftp (2.0.4, 1.1.0) net-ssh (2.0.22, 1.1.2) net-ssh-gateway (1.0.1) rack (1.0.1) rails (2.3.5, 2.0.2) rake (0.8.7, 0.8.1, 0.8.0, 0.7.3) ruby-debug-base (0.10.3 mswin32) ruby-debug-ide (0.4.9) ruby-net-ldap (0.0.4) rubygems-update (1.3.7, 1.3.6, 1.0.1) snmp (1.0.2) sources (0.0.1) sqlite3-ruby (1.2.5 x86-mswin32, 1.2.1 mswin32) win32-api (1.4.6 x86-mswin32-60, 1.0.4 mswin32) win32-clipboard (0.5.2, 0.4.3) win32-dir (0.3.6, 0.3.2) win32-eventlog (0.5.2, 0.4.6) win32-file (0.6.3, 0.5.4) win32-file-stat (1.3.4, 1.2.7) win32-process (0.6.2, 0.5.3) win32-sapi (0.1.5, 0.1.4) win32-sound (0.4.2, 0.4.1) windows-api (0.4.0, 0.2.0)

Read the article

Google maps api v3 refreshing away markers

- by Paul Peelen

Hi, I am having problems with the google maps API V3. It seems that every time I load my page the maps load (including the markers) and then it does a quick reload and removes all the markers. Am I missing somehting? What am I doing wrong? Here is an example: http://www.PaulPeelen.com/wp-content/uploads/2010/04/SafariScreenSnapz001.mov this is my code: <script type="text/javascript">  </script> I hope somebody can help me. Best regards, Paul Peelen

Read the article

Getting an invalidoperationexception when deserialising XML

- by Paul Johnson

Hi, I'm writing a simple proof of concept application to load up an XML file and depending on the very simple code, create a window and put something into it (it's for a much larger project). Due to limitations in Mono, I'm having to run in this way. The code I currently have looks like this using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Windows.Forms; using System.IO; using System.Collections; using System.Xml; using System.Xml.Serialization; namespace form_from_xml { public class xmlhandler : Form { public void loaddesign() { FormData f; f = null; try { string path_env = Path.GetDirectoryName(Application.ExecutablePath) + Path.DirectorySeparatorChar; // code dies on the line below XmlSerializer s = new XmlSerializer(typeof(FormData)); TextReader r = new StreamReader(path_env + "designer-test.xml"); f = (FormData)s.Deserialize(r); r.Close(); } catch (System.IO.FileNotFoundException) { MessageBox.Show("Unable to find the form file", "File not found", MessageBoxButtons.OK); } } } [XmlRoot("Forms")] public class FormData { private ArrayList formData; public FormData() { formData = new ArrayList(); } [XmlElement("Element")] public Elements[] elements { get { Elements[] elements = new Elements[formData.Count]; formData.CopyTo(elements); return elements; } set { if (value == null) return; Elements[] elements = (Elements[])value; formData.Clear(); foreach (Elements element in elements) formData.Add(element); } } public int AddItem(Elements element) { return formData.Add(element); } } public class Elements { [XmlAttribute("formname")] public string name; [XmlAttribute("winxsize")] public int winxs; [XmlAttribute("winysize")] public int winys; [XmlAttribute("type")] public object type; [XmlAttribute("xpos")] public int xpos; [XmlAttribute("ypos")] public int ypos; [XmlAttribute("externaldata")] public bool external; [XmlAttribute("externalplace")] public string externalplace; [XmlAttribute("text")] public string text; [XmlAttribute("questions")] public bool questions; [XmlAttribute("questiontype")] public object qtype; [XmlAttribute("numberqs")] public int numberqs; [XmlAttribute("answerfile")] public string ansfile; [XmlAttribute("backlink")] public int backlink; [XmlAttribute("forwardlink")] public int forwardlink; public Elements() { } public Elements(string fn, int wx, int wy, object t, int x, int y, bool ext, string extpl, string te, bool q, object qt, int num, string ans, int back, int end) { name = fn; winxs = wx; winys = wy; type = t; xpos = x; ypos = y; external = ext; externalplace = extpl; text = te; questions = q; qtype = qt; numberqs = num; ansfile = ans; backlink = back; forwardlink = end; } } } With a very simple xmlhandler xml = new xmlhander(); xml.loaddesign(); attached to a winform button. Everything is in the same namespace and the xml file actually exists. This is annoying me now - can anyone spot the error of my ways? Paul

Read the article

Add options to select box without Internet Explorer closing the box?

- by Paul Colby

Hi, I'm trying to build a web page with a number of drop-down select boxes that load their options asynchronously when the box is first opened. This works very well under Firefox, but not under Internet Explorer. Below is a small example of what I'm trying to achieve. Basically, there is a select box (with the id "selectBox"), which contains just one option ("Any"). Then there is an onmousedown handler that loads the other options when the box is clicked. <html> <head> <script type="text/javascript"> function appendOption(select,option) { try { selectBox.add(option,null); // Standards compliant. } catch (e) { selectBox.add(option); // IE only version. } } function loadOptions() { // Simulate an AJAX request that will call the // loadOptionsCallback function after 500ms. setTimeout(loadOptionsCallback,500); } function loadOptionsCallback() { var selectBox = document.getElementById('selectBox'); var option = document.createElement('option'); option.text = 'new option'; appendOption(selectBox,option); } </script> </head> <body> <select id="selectBox" onmousedown="loadOptions();"> <option>Any</option> </select> </body> </html> The desired behavior (which Firefox does) is: the user see's a closed select box containing "Any". the user clicks on the select box. the select box opens to reveal the one and only option ("Any"). 500ms later (or when the AJAX call has returned) the dropped-down list expands to include the new options (hard coded to 'new option' in this example). So that's exactly what Firefox does, which is great. However, in Internet Explorer, as soon as the new option is added in "4" the browser closes the select box. The select box does contain the correct options, but the box is closed, requiring the user to click to re-open it. So, does anyone have any suggestions for how I can load the select control's options asynchronously without IE closing the drop-down box? I know that I can load the list before the box is even clicked, but the real form I'm developing contains many such select boxes, which are all interrelated, so it will be much better for both the client and server if I can load each set of options only when needed. Also, if the results are loaded synchronously, before the select box's onmousedown handler completes, then IE will show the full list as expected - however, synchronous loading is a bad idea here, since it will completely "lock" the browser while the network requests are taking place. Finally, I've also tried using IE's click() method to open the select box once the new options have been added, but that does not re-open the select box. Any ideas or suggestions would be really appreciated!! :) Thanks! Paul.

Read the article

using ajax to post comments in cakephp results in 404 error, but no errors locally?

- by Paul

Using an ajax helper created for use with Jquery I've created a form that posts comments to "/comments/add", and this works as expected on my local wamp server but not on my production server. On my production server I get a '404 error, cannot find /comments/add'. I've spent quite a bit of time searching for a resolution with no luck so far. I've focused on trying to identify a gap but nothing jumps out at me. Here are some observations: works as expected on local wamp server requestHandler is listed as component files on both local and production server are the same controllers folder has write access autoLayout and autoRender are both set to false Here is the form in my view: <div class="comments form"> <?php echo $ajax->form('/comments/add', 'tournament', array('url' => '/comments/add', 'update' => 'Comments', 'indicator' => 'commentSaved'));?> <fieldset> <legend><?php __('Add Comment');?></legend> <div id="commentSaved" style="display: none; float: right;"> <h2>Loading...</h2> </div> <?php echo $form->hidden('Comment.foreign_id', array('value' => $tournament['Tournament']['id'])); echo $form->hidden('Comment.belongs_to', array('value' => 'Tournament')); echo $form->input('Comment.name'); echo $form->input('Comment.email'); echo $form->input('Comment.web', array('value' => 'http://')); echo $form->input('Comment.content'); ?> </fieldset> <?php echo $form->end('Submit');?> </div> And here is my 'comment's controller add action: function add() { if($this->RequestHandler->isAjax()) { $this->autoLayout = false; $this->autoRender=false; $this->Comment->recursive =-1; $commentInfos = $this->Comment->findAllByIp($_SERVER['REMOTE_ADDR']); $spam = FALSE; foreach($commentInfos as $commentInfo) { if ( time() - strtotime($commentInfo['Comment']['created']) < 180) { $spam = TRUE; } } if ($spam === FALSE) { if (!empty($this->data)) { $this->data['Comment']['ip'] = $_SERVER['REMOTE_ADDR']; $this->Comment->create(); if ($this->Comment->save($this->data)) { $this->Comment->recursive =-1; $comments = $this->Comment->findAll(array('Comment.foreign_id' => $this->data['Comment']['foreign_id'], 'Comment.belongs_to' => $this->data['Comment']['belongs_to'], 'Comment.status' =>'approved')); $this->set(compact('comments')); $this->viewPath = 'elements'.DS.'posts'; $this->render('comments'); } } } else { $this->Comment->recursive =-1; $comments = $this->Comment->findAll(array('Comment.foreign_id' => $this->data['Comment']['foreign_id'], 'Comment.belongs_to' => $this->data['Comment']['belongs_to'], 'Comment.status' =>'approved')); $this->set(compact('comments')); $this->viewPath = 'elements'.DS.'posts'; $this->render('spam'); } } else { $this->Session->setFlash(__('Invalid Action. Please view a post to add a comment.', true)); $this->redirect(array('controller' => 'pages', 'action'=>'display', 'home')); } } As you can see I've made sure that 'autoLayout' and 'autoRender' are set to false, but in Firebug I still get a 404 error stating /comments/add cannot be found on the production server. I should also point out that I'm using jquery, jquery.form and jquery.editable as well as a ajax helper created to be used with jquery. Any help or even suggestions about how to trouble shoot this is really appreciated. Cheers, Paul

Read the article

SharePoint 2010 Design & Deployment Best Practices

- by Michael Van Cleave

Well now that SharePoint 2010 has successfully launched and everyone is scratching for every piece of best practices information they can get their hands on, I would like to invite anyone and everyone to come and take part in ShareSquared's next webinar. The webinar will cover some key information such as: Pros and cons of the different approaches to installing and configuring SharePoint 2010 Configuration Best Practices for SharePoint 2010 farms Services architecture; dependencies, licensing, and topologies Information Architecture guidance for sizing, multilingual support, multi-tenancy, and more. Using tools such as SharePoint Composer and SharePoint Maestro to configure and deploy SharePoint 2010 And most of all, avoiding common pitfalls for installation and deployment. What is better than all of that? Well, the even more exciting thing is that the presenters will be our very own SharePoint MVP's Gary Lapointe and Paul Stork. If you don't know who these guys are then you should definitely check out their blogs and their contributions to the SharePoint community. To get more information and register click here: REGISTER Other great links to information in this post: ShareSquared, Inc Gary Lapointe's Blog Paul Stork's Blog SharePoint Composer Check it out and get up to speed from some of the best in the industry. Michael

Search Results

Search found 1889 results on 76 pages for 'paul rostorp'.

Page 18/76 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25 | Next Page >

- by Paul Kassey

- by Paul Girardin

- by paul

- by Paul

- by Paul

- by John Paul Cook

- by Paul

- by Paul Seattle

- by Paul T Davies

- by Paul

- by Paul

- by Paul Peelen

- by Paul Burney

- by Paul Hutson

- by tonyrogerson

- by BuckWoody

- by Belliez

- by Ian Roke

- by Alex

- by Paul

- by Paul Peelen

- by Paul Johnson

- by Paul Colby

- by Paul

- by Michael Van Cleave

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25 | Next Page >