Search Results

Search found 2226 results on 90 pages for 'promise raid'.

Page 18/90 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • growing EBS RAID volume

    - by Ryan Fernandes
    I've created a RAID0 configuration with two 1GB EBS volumes, mounted at /dev/md0 using mdadm and formatted with XFS Next, I copied some files over to fill the volume to around 30% of its capacity (of 2GB) I then created snapshots of the volumes using ec2-consistent-snapshot and created volumes of the said snapshots but specified the volume size to be 2GB (effective doubling the capacity on each disk) I then spun up a new instance, assembled the RAID0 configuration on /dev/md0 from the 2 volumes mentioned above and mount it to /vol df -hT showed /vol as 2GB (as expected) Now I ran sudo xfs_growfs -d /vol. The command completed normally but reported blocks changed from 523776 to 524160 (only!) and df -hT still showed /vol as 2GB (instead of the expected 4GB) I rebooted, remounted, reassembled the RAID but it still reports the old size. Any clue as to what went wrong?

    Read the article

  • 3ware RAID in Windows 7

    - by scribbles
    Just moved a 3ware 9500S-8 raid card and a few drives from my linux box into my win7 box. Windows Updates picked up the 3ware driver and installed it. After a reboot I checked Disk Management and it shows the array as one solid drive with the correct size. The only issue is that its not assigned a drive letter and when I right click on it my only option is to Convert to Dynamic Disk... From what I've read this is not something I want to do. What are my options?

    Read the article

  • Installing raid controller forces reinstall of Windows Server 2008

    - by Tyler
    So, I've tried two different RAID controllers that have external SATA connections on my Server 2008 machine. I can install the hardware, boot into Windows, install the drivers and reboot again. No problems. However, as soon as I try to use eSATA-connected drives and reboot something happens to the Windows install and I can no longer boot into Windows. I tried repairing from the command line, and the end result is that repair console tells me I have 0 Windows installations (?). I end up having no choice but to reinstall Windows to get back on track. I must be doing something fundamentally wrong here, but I don't know what :(

    Read the article

  • RAID Array performance on an HP Proliant ML350 G5 Smart Array E200i

    - by Nate Pinchot
    We have a client who is complaining about performance of an application which utilizes an MS SQL database. They do not believe the performance issues are the fault of the application itself. The Smart Array E200i RAID controller has 128MB cache and we have the cache set to 75% read/25% write. The disk array set to enable write caching. Recently we ran a disk performance test using SQLIO based on this guide. We used a 10 GB file for the test found that the average sequential read rate was ~60 MB/sec (megabytes/sec) and the average random read rate was ~30 MB/sec. Are these numbers on par for what the server should be performing? Better than on par? Horrible? Amazing?

    Read the article

  • How to set up RAID 1 on Dell PERC S300 With Existing OS Install

    - by Daniel Dugger
    We have a server that is being used in production, but it was not originally meant to. The main thing I want to add to it is a Dell PERC S300 RAID Card to have the main hard drive (Windows Server 2008 R2) mirrored on another hard drive. I can not initialize the disk and wipe the the OS to create the array and then re-install. Is there a way to create the array with a current hard drive, without affecting it, and just mirroring the drive? If that card is not an option, is there a card that would allow that? The server is a Dell PowerEdge T110 II.

    Read the article

  • 3ware RAID in Windows 7

    - by user36484
    Just moved a 3ware 9500S-8 raid card and a few drives from my linux box into my win7 box. Windows Updates picked up the 3ware driver and installed it. After a reboot I checked Disk Management and it shows the array as one solid drive with the correct size. The only issue is that its not assigned a drive letter and when I right click on it my only option is to Convert to Dynamic Disk... From what I've read this is not something I want to do. What are my options?

    Read the article

  • How many disks to use for eight channel RAID controller

    - by Tvrtko
    I have a 3ware 8 channel SAS controller and a back plane extender (also 8 channel) which can take 16 drives. I will be creating a single RAID 10 volume. I know that adding more drives has positive effect on performance, but I'm not sure if adding more than 8 drives on an 8 channel controller will have any positive impact at all. Am I wrong? Should I put 16 drives for best performance? Would 8 drives give me the same performance?

    Read the article

  • Raid 5 GPT Partitioning

    - by user39325
    Hi, i have a Dell Poweredge r710 server with five 1 TB disks. All of them are in RAID 5. I was trying to install Centos but it sais "Your boot partition is on disk using GPT Partition...". I read somewhere that centos cant install on 2TB disk, so i made some partiotions smaller, but it's not workin. any idea? p.s. i am going to install Proxmox on that, but Proxmox same doesnt accept 2TB disks...

    Read the article

  • RAID-0 problem with a Sony sporting a new HDD

    - by redrock
    Sony Windows 7 PC. Originally had 2 x 300 Gb HDD. One HDD completely pancaked so have replaced with a new 500 Gb HDD. When both drives are connected the 300GB doesn't appear to be recognized as a 300Gb HDD as a separate entity. BIOS sees it but the operating system only sees a total of 465GB of HD space. When both disks are attached under disk management it shows one 465Gb as RAID 0 and the new drive as STxxxxxx 465Gb. My question I guess is what should I see in total HDD space and is this configured correctly as I thought I would see 2 separate drives 1x500Gb and 1x300Gb. My customer insisted that prior to the HDD crash he saw 2 drives both registering as 300Gb (a c: and d: drive).

    Read the article

  • Which software raid modes does each version of Windows 7 support?

    - by Goyuix
    Being familiar with the software raid modes and dynamic disks from the server versions, I was wondering if there is a document or even just common crowd knowledge that indicated what software raid support was available for each version of Windows 7. Also - all the various raid levels supported for booting or just a data recovery mechanism (e.g. you can connect three RAID-5 dynamic disks to an already booted system). I would prefer to stay away from modified/copied DLL's from the server variants, as well - please note - this is Windows software RAID - not fake-raid from your BIOS or an add-on card.

    Read the article

  • Problem setting up DL360G5 with scsi RAID

    - by ernelli
    I have a problem with reinstalling OS on a DL360G5. The BIOS [F9] do not detect any disc controllers and the HP SmartSetup did not find any compatible controllers. Inside the server, the two SCSI disks are conncted to a RAID controller using BCM8603 chipset. How is disc contoller supposed to be setup? I have tried to do a full BIOS reset. EDIT At the moment we suspect that the Smart Array controller E200i/412205-001 is broken. Are there any status LED's that indicate failure or success during start up? At the moment all LED's are off.

    Read the article

  • Intel RST accidentally selected wrong drive as system drive -- how to fix?

    - by Sean Killeen
    Question / TL;DR If Intel RST has marked a drive other than my RAID set as the system drive, how can I get it so that the RAID set is now seen as the system drive, and catch it up to my drive now? What Happened NOTE: Some perhaps unwise decisions are ahead. This is as best as I can recall the order of things. I had a 2x1TB RAID1 config. I bought the drives around the same time, and they started to die around the same time. I replaced 1st drive with a 2 TB drive before the other one's SMART errors got more serious. I waited for the RAID to replicate, then replaced the 2nd drive with a manufacturer's replacement. I got a second manufacturer's drive replacement and used it as a spare. so I now I had a 1TB/2TB drive in a RAID1 and another 1TB as a spare. The 1TB drive in the replacement set was bad from the manufacturer. Rather than mess with their refurbished stuff, I bought another 2 TB drive an upped the config to a 2x2TB RAID1 with the other, functioning manufacturer's drive as a spare. I made the mistake of trying to bring the other drive online to clean it out and the signatue clash killed my machine. When the machine rebooted, that drive was marked as the system drive. So, I have a 2x2TB RAID1 that is apparently offline, and 1 spare 1 TB refurbished drive that everything is being run from. Not a great idea. Options I'm considering Bring the 2x2TB drive back online, and then unplug the spare until I can format it in another system. This would involve some data loss, but the more I think about it, I actually think I haven't modified any data that isn't backed up or synced somewhere (go me!) Anything that isn't is likely trivial, enough that I'm willing to take the risk. One downside here is that if the 2 TB doesn't have data on it for some reason, I could be screwed trying to put the other drive back in, no? Try to somehow get the RAID1 updated with the data from the current system drive. Option 3?

    Read the article

  • How to set up raid monitoring on a Adaptec AAC-RAID on a Dell?

    - by pjz
    I've got Debian on a Dell with an Adaptec RAID: AAC0: kernel 4.1-0[7417] AAC0: monitor 4.1-0[7417] AAC0: bios 4.1-0[7417] AAC0: serial 4edf09 scsi2 : aacraid Vendor: CERC Model: DATA 1 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 Vendor: CERC Model: Data 2 Rev: V1.0 Type: Direct-Access ANSI SCSI revision: 02 I've got it set up using the fine afacli tool (ick). Is there a way to get it to email me when there's an error? Do I need to hand-roll a script for this? what's the right version of the afacli tool to use? v4.1 gets SIGABRT and exits after I ask it to 'container list' or 'enclosure list' v2.8's enclosure commands don't work either Do I need to upgrade firmware? to what? from where? how?

    Read the article

  • After enabling raid0, blue screen of death

    - by thegreyspot
    Hi! Im trying to get a raid0 setup going. I have a 750 gb hdd with the OS on it and two 80gb HDD. For right now, I just want to raid0 on the two 80Gb hdd. When I enable raid in my Bios, Win7 has a BSOD during boot. As far as I understand I need to install raid drivers. However how can I do this? The win7 DVD doesnt seem to have a driver install option. Any suggestions? Thanks EDIT: I saw that there was as seperate setting for the 4th and 5th sata ports. So I pluged in my OS drive into there and left it on IDE. Still didnt work though, am I miss understanding that idealogy?

    Read the article

  • How long to erase flash memory (RAID controller)?

    - by Rob Nicholson
    I made a bit of a boo boo last night in upgrading the BIOS in a Silicon Image Sil3132 eSATA adapter. It's a RAID controller in a server. I accidently flashed it with the wrong BIOS ;-) Not the end of the world as this card only cost £15 but I'm trying to flash it with the correct BIOS as it won't obviously work anymore. Silicon Image supply a DOS program for flashing and I thought I'd use the Erase function to get rid of the old BIOS. Any idea how long this should take? It's been sat at the "Erasing memory" prompt for about 15 minutes. Thanks, Rob.

    Read the article

  • Impossible to stop raid device

    - by Traroth
    I'm trying to stop a RAID disk in order to replace it by a new one, as this one is not working properly. I'm typing mdadm --stop /dev/md1, and I'm getting an error message: mdadm: fail to stop array /dev/md1: Device or resource busy I'm getting this message even if I reboot the server, and I can't see a process that could cause this. The server is working under a Debian with a 2.6.18-4-amd64 kernel. Could you help? Edit: Mote details about what my colleague tried out. After unmounting sda1, the command mdadm --remove /dev/md0 /dev/sda1 worked. But now, we still have an error message after mdadm --remove /dev/md1 /dev/sda5: mdadm: hot remove failed for /dev/sda5: Device or resource busy I still don't understand completly how the different partitions are mounted, so I suppose there is something I don't understand in the currenct situation...

    Read the article

  • win2008 R2 server core software RAID

    - by shimonyk
    I am trying to set up software raid on a win2008 R2 server core. I have the disks configured as dynamic. In the server manager gui, i can see the disks, but when i right click, the option to set up "new mirrored volume" is not listed. I tried it with the command line using diskpart, and it gives the error "Virtual Disk Service Error: The size of the extent is less than the minimum." The drive are a new pair of 1Tb disks. Is this not supported in server core, or am i missing something else? Thank you

    Read the article

  • Setting up Raid 1 Array for Home Server

    - by user1048116
    I'm not sure if this is even possible, but it's worth asking on here! Essentially I have a old machine at home (well, not old hardware wise, but I recently built a new gaming rig), which I decided to install a copy of W2008 R2 on and use as a file/backup server and media center'ish machine. As of now, it has a single drive partitioned into C and D, with D being the Data partition. I have happened to find an old 1TB SATA drive lying around at home, and was wondering if it's possible to setup a Raid 1 array in my rig within Windows without needing to lose everything on my first drive (or maybe even just mirror a specific partition, say the Data partition, as this is just what stores my photos etc). Maybe this isn't possible, but you never know :) Regards, T.C

    Read the article

  • Alerting when a RAID Array disk fails locally on VMWare ESX or ESXi System

    - by Tim K
    With ESX and ESXi, we recently had two systems where that the boot partition became degraded due to a failed disk. The only alert we managed to capture was the visual alert on the Dell servers. We failed to received any electronic alerts regarding the failed or degraded array. Does anyone have any experience with monitoring for these types of failures? In both cases, the servers were running in a RAID 5 SCSI configuration (5 disks on one system, 3 disks on another) which if we were running a Windows Server OS, we would have had an alert created in the Eventviewer. Where would I begin to look for this solution. Can it be configured in VCenter or vFoglight?

    Read the article

  • Expanding RAID 1 array size (Adaptec 1420SA controller)

    - by cincura.net
    I have an Adaptec 1420SA controller in server and RAID 1 array created. The old disks slowly started to report S.M.A.R.T errors so I replaced first one, rebuild array and then other one and rebuild the array again. But the new drives are bigger, so I'd like to expand the array to use full disk capacity. Is it somehow possible? In the Adaptec configuration utility, after POST, I didn't found anything that could do it. I still have the old drives, if it helps. The array is used for system (Windows 2008 R2 SP1) booting. Thanks.

    Read the article

  • Transfer Raid Drives to External Enclosure

    - by dubbeat
    I have 2 raid disks (a grand total of 360GB) in my laptop. I'm fast running out of space and want to install new drives. I've a pretty good idea how to do this. My question is what can I do with the drives that I remove? I've got lots of media files on these drives that I'd like to keep and maybe transfer back onto my laptop once I have the new drives installed. Bearing in mind that I know next to nothing about hardware how do you suggegst I go about reusing the removed drives somehow? Thanks,

    Read the article

  • Software Raid 10 corrupted superblock after dual disk failure, how do I recover it?

    - by Shoshomiga
    I have a software raid 10 with 6 x 2tb hard drives (raid 1 for /boot), ubuntu 10.04 is the os. I had a raid controller failure that put 2 drives out of sync, crashed the system and initially the os didnt boot up and went into initramfs instead, saying that drives were busy but I eventually managed to bring the raid up by stopping and assembling the drives. The os booted up and said that there were filesystem errors, I chose to ignore because it would remount the fs in read-only mode if there was a problem. Everything seemed to be working fine and the 2 drives started to rebuild, I was sure that it was a sata controller failure because I had dma errors in my log files. The os crashed soon after that with ext errors. Now its not bringing up the raid, it says that there is no superblock on /dev/sda2, even if I assemble manually with all the device names. I also did a memtest and changed the motherboard in addition to everything else. EDIT: This is my partition layout Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0009c34a Device Boot Start End Blocks Id System /dev/sdb1 * 2048 511999 254976 83 Linux /dev/sdb2 512000 3904980991 1952234496 83 Linux /dev/sdb3 3904980992 3907028991 1024000 82 Linux swap / Solaris All 6 disks have the same layout, partition #1 is for raid 1 /boot, partition #2 is for raid 10 far plan, partition #3 is swap, but sda did not have swap enabled EDIT2: This is the output of mdadm --detail /dev/md1 Layout : near=1, far=2 Chunk Size : 64k UUID : a0feff55:2018f8ff:e368bf24:bd0fce41 Events : 0.3112126 Number Major Minor RaidDevice State 0 8 34 0 spare rebuilding /dev/sdc2 1 0 0 1 removed 2 8 18 2 active sync /dev/sdb2 3 8 50 3 active sync /dev/sdd2 4 0 0 4 removed 5 8 82 5 active sync /dev/sdf2 6 8 66 - spare /dev/sde2 EDIT3: I ran ddrescue and it has copied everything from sda except a single 4096 byte sector that I suspect is the raid superblock EDIT4: Here is some more info too long to fit here lshw: http://pastebin.com/2eKrh7nF mdadm --detail /dev/sd[abcdef]1 (raid1): http://pastebin.com/cgMQWerS mdadm --detail /dev/sd[abcdef]2 (raid10): http://pastebin.com/V5dtcGPF dumpe2fs of /dev/sda2 (from the ddrescue cloned drive): http://pastebin.com/sp0GYcJG I tried to recreate md1 based on this info with the command mdadm --create /dev/md1 -v --assume-clean --level=10 --raid-devices=6 --chunk=64K --layout=f2 /dev/sda2 missing /dev/sdc2 /dev/sdd2 missing /dev/sdf2 But I can't mount it, I also tried to recreate it based on my initial mdadm --detail /dev/md1 but it still doesn't mount It also warns me that /dev/sda2 is an ext2fs file system but I guess its because of ddrescue

    Read the article

  • FreeNAS/ZFS/Raid-Z slightly different disks

    - by muskratt
    I'm considering using FreeNAS and "recycling" some of my older 1TB disks. Two are the exact same model Western Digital while another is Seagate and the fourth is Samsung. Typically, since all disks are not equal, I'll create my arrays on a Windows-based server 1GB undersized to prevent a replacement disk not being large enough. Dell is notorious for sending replacement SATA disks of different brand---knock on wood, no problems yet. Since not all drives are created equally and they can vary a few MBs, is there a way to make the the FreeNas/ZFS/Raid-Z function in the same way I do for my Windows-based servers above? Thanks

    Read the article

  • Is it normal for a SAS drive to have a few bad blocks, or should I replace my drive ASAP?

    - by Nate
    I have a drive—part of a RAID 1 mirror—that has two bad blocks. Adaptec Storage Manger e-mailed me when it detected the blocks. It shows 4 medium errors for that drive, but state is still “optimal”. This is my first time using Adaptec RAID controllers. I don’t know if an occasional bad block is normal, or if I should immediately replace that drive. Update: The drive failed later the same day! The disk subsystem is: Adaptec 6405 with ZMM (2) Seagate near-line SAS drives (ST31000424SS) The other drive hasn’t reported any bad blocks yet. I am running a consistency check.

    Read the article

  • RAID 1 Mirror Error with Two Western Digital 500GB Drives

    - by bm678
    I have Windows 7 Ultimate 64 bit installed on a Western Digital 500GB drive (WD5000BEVT-22ZAT0) that was partitioned automatically by Windows as 100MB System Reserved and 465.66GB drive C. There is also an unallocated second Western Digital 500GB drive (WD5000BPVT-22HXZT1) that I want to use for RAID 1 to mirror the first drive but I get an error message stating “ALL DISKS HOLDING EXTENTS FOR A GIVEN VOLUME MUST HAVE THE SAME SECTOR SIZE, AND THE SECTOR SIZE MUST BE VALID.” I uninstalled Windows patch KB-982018 but I still get the same error message. Could you please let me know how to resolve this? Thanks.

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >