Search Results

Search found 2863 results on 115 pages for 'sms gateway'.

Page 18/115 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Reverse proxy 502 bad gateway

    - by Brian Graham
    I have setup a subdomain to proxy my plesk panel, but when saving pages I am getting 502 Bad Gateway error instead of a completion message. I am running CentOS 6. Here is my vhost.conf configuration for http://plesk.domain.tld/: RewriteEngine On RewriteCond %{SERVER_PORT} ^80$ RewriteRule $ https://plesk.domain.tld/ [R,L] Here is my vhost_ssl.conf configuration for https://plesk.domain.tld/: SSLProxyEngine On <Location /> ProxyPass https://localhost:8443/ ProxyPassReverse https://localhost:8443/ </Location> I have more than enough (and I have even checked) RAM, CPU and HDD. There are no spikes. As well, the posted information does save, it just errors when trying to show me a "This information has been saved." green/red block. Here is the relevent error from /var/log/nginx/error.log (IP/Host Filtered): 2014/05/29 02:42:41 [error] 8046#0: *402 upstream prematurely closed connection while reading response header from upstream, client: 173.238.XX.XX, server: plesk.domain.tld, request: "POST /smb/web/edit HTTP/1.1", upstream: "https://198.100.XX.XX:7081/smb/web/edit", host: "plesk.domain.tld", referrer: "https://plesk.domain.tld/smb/web/edit"

    Read the article

  • Citrix Access Gateway not redirecting to login URL

    - by Dave
    We have an older setup for XenApp - users log in through Citrix Secure Gateway running on a windows box. (We hope to start using a NetScaler soon.) Earlier today, connections to https://citrix.company.com/ starting throwing up a 503 error page, instead of redirecting to https://citrix.company.com/Citrix/XenApp/ If you go directly to the /Citrix/Xenapp/ URL, the user is properly directed to the login page, and can launch apps. We've restarted the service, and rebooted the server. We haven't yet tried uninstalling and reinstalling the software. Before we do this, I'm looking for ideas as to how we can get the redirect working again without a fairly major outage window. To make things more interesting, many of our users have Citrix Receiver installed, also pointed at https://citrix.company.com/. Receiver makes itself the default launcher for ICA files, and gives a connection error when it tries to load apps - probably because of the same non-functional rediect?

    Read the article

  • Why is this static routing not working ?

    - by geeko
    Greeting gurus, I'm trying to develop a DHCP enforcement extension like Microsoft NAP. My trick to block dynamic-IP requesting machines (that don't meet certain policy) is to strip the default gateway (no default gateway) stated in the IP lease and set the lease subnet mask to 255.255.255.255. Now I need the blocked machines to be able to reach some specific locations (IPs) on the network. To allow for this, I'm including some static routes in the lease. For example, I'm including 10.10.10.11 via router 10.10.10.254 (the one to which the blocked machine that needs to access 10.10.10.11 is connected). Unfortunately, as soon as I set the default gateway to nothing, blocked machines cannot reach any of the added static routes. I also tried classless static routes. Any ideas ? any one knows how MS NAP actually do it ? Geeko

    Read the article

  • VPN: What should my Gateway remote ID be?

    - by Lynn Owens
    I have a Netgear ProSafe UTM. I set the Gateway local ID to it's WAN IP. But I'm not sure what to put for it's Remote ID. I want to be able to connect to it from a laptop across the internet. I can chose between: Remote IP FQDN Client FQDN Cert DN Frankly I've tried them messing around with them all but I'm just shooting in the dark, and the help desk docs are worthless. Also, Googling around seems to end up with lots of pages not really related to what I want. A lot of pages on configuring Cisco or Windows home networking or privacy advocates.

    Read the article

  • Chain Gateways on the LAN

    - by Black2night
    I installed m0n0wall in a virtualized environment, i have 10 PCs connected to a router ( 192.168.1.0/24) which connect them to the internet through PPPoE, the problem is that this router does not have a QoS so what i want to do is the following :- let all the PCs get their IP from the Router and the default gateway will be m0n0wall the moon wall will have 2 interface (Lan 192.168.1.20) and (Wan 192.168.1.21 and default gateway 192.168.1.1) now when any PC want to access the internet it should go through m0n0wall and then m0n0wall will forward the connection to the default gateway through the wan interface which is the PPPoE running on the router (192.168.1.1) the big question is this scenario possible or not and what do you suggest? Thanks

    Read the article

  • 504 Gateway Time-out after php fatal error

    - by tiagojsag
    I'm using nginx and php-fpm to develop a symfony2 based website, under ubuntu 12.10 (yes, I know I'm using a beta OS). Everything was working out fine until, due to an error on my code, I called an unexisting function, and got the following: Fatal error: Call to a member function (....) This isn't a problem (it's a bug in my code, easily fixable), but after this, no other page loads. My browser just keeps trying to load the page from the webserver, until nginx timeouts (after +- 30s, which should be some default timeout) and returns: 504 Gateway Time-out Restarting php-fpm solves the issue. Nginx logs show a timeout message, and nothing appears on php-fpm logs, even if I set them to debug level. I tried switching from fpm to fastcgi, and the same thing happens. I've looked around, but all similar error are related to big requests/file handling, which isn't the case. All the pages on my website load in a few seconds, even under development conditions (no caching, etc).

    Read the article

  • 504 Gateway Timeout on server clusters

    - by Sixfoot Studio
    Hi All, Here's our scenario: We're running three websites on three web servers hosted on virtual machines running the following: IIS6 Win 2003 Standard Edition Oracle 10g Sitefinity 3.7 We do not have constant control over these servers and something's gone wrong in the interim in that we're getting constant 504 Gateway Timeouts. The other thing that's happening is that if you hit one of the sites, that site is trying to pull themes from one of the sites App_Themes folder in Sitefinity, which of course should not be happening at all. If someone has any ideas on why this should suddenly have started happening I would appreciate it. Many thanks

    Read the article

  • VPN ipsec tunnel from router to single windows server computer (gateway-to-host)

    - by Chris Miller
    Firstly, is this possible? The situation: 2 different ISP's. One has several servers and a firewall running. The other is limited to only one virtual server with one network card running windows server 2008r2. I need to set up a site-to-site style VPN using IPsec between the firewall of one ISP and the windows host on the other (gateway-to-host). This host has to run a SQL-Server that I can access from the other ISP's servers through the VPN tunnel. It seems looking at the RFC for IPsec that this should be possible using the features of Windows 2008, but I can't get it to work so far... It seems that I can't access any services running on the same computer or IP address used as the tunnel endpoint? Thanks Chris

    Read the article

  • How much does a IPtables router slow down a connection?

    - by RayQuang
    Hi, I would like to know if introducing a new gateway in my network will slow things down. The question may sound unclear but here is an illustration: Before Installing gateway server Main Router <=> switches <=> servers after installing gateway Server Main Router <=> IPtables router <=> switches <=> servers My question is. How much will this delay incoming outgoing requests / file transfers. thanks, RayQuang

    Read the article

  • Allow Internet Access with Default Gateway on Windows 7 VPN Server

    - by Hakoda
    I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4 I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable. I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN. Any ideas on how I can fix this?

    Read the article

  • Django site on Nginx+FastCGI goes (504 gateway timeout)

    - by jack
    Sometimes my whole Django based site goes into 504 gateway timeout errors so none page can be displayed. Is it possible to write a shell program and cronjob it run every 5 minutes to detect such errors and restart FastCGI process if needed? I'm currently using command below to restart FastCGI in case it's crashed but it doesn't work for above situation because when 504 gateway errors occur, the processes are still running. ps ax | grep -v grep | grep port=8001 > /dev/null || restart_fcgi.sh

    Read the article

  • Can't install chef, gem version conflict with net-ssh net-ssh-multi net-ssh-gateway

    - by Mojo
    Using rvm, and an empty gemset, I get this: $ gem install chef --no-ri --no-rdoc ERROR: While executing gem ... (Gem::DependencyError) Unable to resolve dependencies: chef requires net-ssh (~> 2.2.2); net-ssh-multi requires net-ssh (>= 2.6.5); net-ssh-gateway requires net-ssh (>= 2.6.5) I've tried resolving it by installing earlier versions of net-ssh-gateway and net-ssh-multi, but net-ssh-multi version 1.1 confounds me by installing 1.1.2.

    Read the article

  • Fortigate Remote VPN : no matching gateway for new request

    - by Kedare
    I am trying to configure a Fortigate 60C to act as an IPSec endpoint for remote VPN. I configured it like this : SCR-F0-FGT100C-1 # diagnose vpn ike config vd: root/0 name: SCR-REMOTEVPN serial: 7 version: 1 type: dynamic mode: aggressive dpd: enable retry-count 3 interval 5000ms auth: psk dhgrp: 2 xauth: server-auto xauth-group: VPN-group interface: wan1 distance: 1 priority: 0 phase2s: SCR-REMOTEVPN-PH2 proto 0 src 0.0.0.0/0.0.0.0:0 dst 0.0.0.0/0.0.0.0:0 dhgrp 5 replay keep-alive dhcp policies: none Here is the configuration: config vpn ipsec phase1-interface edit "SCR-REMOTEVPN" set type dynamic set interface "wan1" set dhgrp 2 set xauthtype auto set mode aggressive set proposal aes256-sha1 aes256-md5 set authusrgrp "VPN-group" set psksecret ENC xxx next config vpn ipsec phase2-interface edit "SCR-REMOTEVPN-PH2" set keepalive enable set phase1name "SCR-REMOTEVPN" set proposal aes256-sha1 aes256-md5 set dhcp-ipsec enable next end But when I try to connect from a remote device (I tested with an Android Phone), the phone fail to connect and the fortinet return this error : 2012-07-20 13:08:51 log_id=0101037124 type=event subtype=ipsec pri=error vd="root" msg="IPsec phase 1 error" action="negotiate" rem_ip=xxx loc_ip=xxx rem_port=1049 loc_port=500 out_intf="wan1" cookies="xxx" user="N/A" group="N/A" xauth_user="N/A" xauth_group="N/A" vpn_tunnel="N/A" status=negotiate_error error_reason=no matching gateway for new request peer_notif=INITIAL-CONTACT I tried searching on the web, but i did not find anything revelant to this. Do you have any idea of what can be the problem ? I tried many combinaisons of settings on the fortigate without success..

    Read the article

  • Routing static IP traffic on a Comcast Business Class IP Gateway (SMCD3G-CCR)

    - by Jakobud
    We are in the process of replacing our firewall, which is currently the only thing connected to our Comcast Business Class modem. Comcast gives us 5 static IP addresses. Currently, all traffic to all 5 static IPs goes directly to the existing firewall. Eventually, obviously all traffic will goto the new firewall, once the old firewall is removed from the network. But in the meantime, as we will have two firewalls plugged into the same Comcast modem, I need to route certain traffic to the new firewall instead of the old one. The firewall switchover is going to be slow and gradual as I am testing it, so I can't simply unplug the existing firewall and plug in the new one. So my question is, how do I tell the modem to route all traffic that goes to a specific IP to goto the new firewall instead of the old one? I've logged into the web interface for the modem, but the available options aren't very clear. There is a 1-to-1 NAT option (which I can't seem to get the interface for it to work properly) but I also see a "Static Routing" section. I always understood Static Routing to refer to routing data within the LAN though, so I'm not sure if that's what I'm looking for or not. Keep in mind, I'm not looking to do simple port forwarding. I'm wanting 100% of traffic to certain public static IPs to go to the specified connected firewall (I'll deal with service policies there). The modem is an SMC SMCD3G-CCR and is labeled as a Comcast Business Class Business IP Gateway. Any help or direction would be greatly appreciated.

    Read the article

  • Route return traffic to correct gateway depending on service

    - by Marnix van Valen
    On my office network I have two internet connections and one CentOS server running a website (HTTPS on port 443). The website should be publicly accessible through the public IP of the first internet connection (ISP-1). The other internet connection, ISP-2, id the default gateway on the network. Both internet connections have routers (the household-kind) with NAT, SPI firewalls etc. The router on ISP-2 is a Netgear WNDR3700 (aka N600) with original firmware. The problem is that the website is unreachable. Looks like incoming traffic on ISP-1 will reach the server but the returning traffic is routed through ISP-2, effectively making the site unreachable. As far as I can tell I can't do port based routing on the WNDR3700. What are my options to make this work? I've been looking at implementing an iptables / routing based solution on the server itself but haven't been able to make that work. Update: Note that the server has one network interface connecting it to both routers.

    Read the article

  • RD Gateway reporting features/capabilities

    - by Don
    We have just implemented RD Gateway for our own department in preparation for a push to the whole agency for telecommuting. It is all setup and working great, but I was trying to figure out how best to go about monitoring/reporting of users. I see third party software out there that will do it, but is there anything built-in or via powershell/scripting that I could use that would give me a report of the daily activity of users? Something to say, "User A connected at this time, was on for this long, sent/received this much data"? Basically some of the same stuff you can see in event viewer. Ideally I'd like to be able to have this setup so that once a day it emails me with the daily usage for when a supervisor asks about if their person is actually working (or at least online sending and receiving x amount of data), I'll have some metrics to give them. I realize that actual work output is relevant and more of a managerial issue, but I would like to be able to offer as much as I can from my end when asked. Thoughts? Thanks!

    Read the article

  • Nginx 502 Bad Gateway: It just won't stop

    - by David
    I have the same problem that most people seem to have with Nginx: 502 bad gateway errors. They are intermittent but typically happen more than once per session, which means my users are probably running into it nearly every time they use the app. I've tried adjusting fastcgi_buffers and fastcgi_buffer_size (in both directions) to no avail. I've tried various other things with the configuration file but nothing seems to work. Here's my config (note that I've stripped away most of the things I've tried, since they didn't work and I didn't want to bloat the file with a bunch of un-related directives): server { root /usr/share/nginx/www/; index index.php; # Make site accessible from http://localhost/ server_name localhost; # Pass PHP scripts to PHP-FPM location ~ \.php { include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:9000; } # Lock the site location / { auth_basic "Administrator Login"; auth_basic_user_file /usr/share/nginx/.htpasswd; } # Hide the password file location ~ /\. { deny all; } client_max_body_size 8M; } I'm running a small Rackspace cloud server, which should be plenty for handling an app with a small user base...

    Read the article

  • Win/Bios showing wrong RAM in Gateway Netbook?

    - by Ael
    I've seen similar problems, but this seems slightly unique, maybe... I have a Gateway LT21 netbook, Win7. I've upgraded RAM from 1gb to 2gb. It didn't work. So I updated to the latest Bios 1.25, then it worked. 2gb was recognized in the Bios and in Windows. Every was fine. Now today it seemed slow and, to my surprise, both the Bios and Win show only 1gb. :/ I've run memory diagnostic, no error. I entered bios and hit Exit and Save. Still 1gb. I took out the ram, put it back. Still 1gb. :/ CPU-Z shows 2048mb/2gb of RAM. Further testing: if i put in the old 1gb ram, turn on, then put in the new 2gb ram again, the Bios and Win show 2gb of ram. BUT, once restarted at all (even from Bios) it seems to go back to showing incorrect 1gb ram again. :// (There are very few options in the bios, none appear memory-related.) Any ideas?

    Read the article

  • One Windows Domain workstation can ping gateway but gets no internet access

    - by dindeman
    One of the (Windows XP SP3) workstations of our Windows Domain could not access internet anymore, this problem suddenly happened overnight. The domain controllers (there are three of them) are all running Windows Server 2008. First I compared the output of ipconfig /all on the faulty workstation with the output of a working workstation and it was just fine as it had always been. In particular the default gateway was correct and always remained pingable from the faulty workstation. I guessed that something was wrong with the DHCP service and I restarted the DHCP server service on all of our three DCs as well as the DHCP client service on the faulty workstation. This didn't solve the issue. I then thought of renewing the DHCP lease with ipconfig /release and ipconfig /renew and here is my first question: why did this never work? The same IP address (192.168.0.45) kept being assigned despite all my attempts to renew it (note that all our workstation are getting their TCP/IP automatically.) Even by leaving the domain and changing the computer name the same address was yet again obtained... Anyway I then proceeded to switch the TCP/IP configuration for that machine manually to another free valid IP address (192.168.0.41)... and then the internet access came back! I then cleared any traces of the previous IP in the DHCP leases list and in the DNS tables of our DCs and, after setting back the TCP/IP configuration to 'automatic', finally, the new lease would be granted (192.168.0.41) alongside with the internet access. My second question: what went suddenly wrong with the original IP address?

    Read the article

  • OpenVPN Clients using server's connection (with no default gateway)

    - by Branden Martin
    I wanted an OpenVPN server so that I could create a private VPN network for staff to connect to the server. However, not as planned, when clients connect to the VPN, it's using the VPN's internet connection (ex: when going to whatsmyip.com, it's that of the server and not the clients home connection). server.conf local <serverip> port 1194 proto udp dev tun ca ca.crt cert x.crt key x.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 9 client.conf client dev tun proto udp remote <srever> 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert x.crt key x.key ns-cert-type server comp-lzo verb 3 Server's route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 69.64.48.0 * 255.255.252.0 U 0 0 0 eth0 default static-ip-69-64 0.0.0.0 UG 0 0 0 eth0 default static-ip-69-64 0.0.0.0 UG 0 0 0 eth0 default static-ip-69-64 0.0.0.0 UG 0 0 0 eth0 Server's IP Tables Chain INPUT (policy ACCEPT) target prot opt source destination fail2ban-proftpd tcp -- anywhere anywhere multiport dports ftp,ftp-data,ftps,ftps-data fail2ban-ssh tcp -- anywhere anywhere multiport dports ssh ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:20000 ACCEPT tcp -- anywhere anywhere tcp dpt:webmin ACCEPT tcp -- anywhere anywhere tcp dpt:https ACCEPT tcp -- anywhere anywhere tcp dpt:www ACCEPT tcp -- anywhere anywhere tcp dpt:imaps ACCEPT tcp -- anywhere anywhere tcp dpt:imap2 ACCEPT tcp -- anywhere anywhere tcp dpt:pop3s ACCEPT tcp -- anywhere anywhere tcp dpt:pop3 ACCEPT tcp -- anywhere anywhere tcp dpt:ftp-data ACCEPT tcp -- anywhere anywhere tcp dpt:ftp ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:smtp ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- 10.8.0.0/24 anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination Chain fail2ban-proftpd (1 references) target prot opt source destination RETURN all -- anywhere anywhere Chain fail2ban-ssh (1 references) target prot opt source destination RETURN all -- anywhere anywhere My goal is that clients can only talk to the server and other clients that are connected. Hope I made sense. Thanks for the help!

    Read the article

  • phpMyAdmin causes php-fpm worker to restart (502 Bad Gateway)

    - by rndbit
    I am trying to set up a test site for myself. Everything works fine except phpMyAdmin. php installation loads my test site scripts, they work fine, however trying to load phpMyAdmin i get 502 Bad Gateway error. Judging from logs (that are not too helpful) it seems that php-fpm worker is crashing each time phpmyadmin is being accessed. No clue how or why.. Does anyone have any idea? nginx log: *3 recv() failed (104: Connection reset by peer) while reading response header from upstream, And php-fpm log: [07-Jun-2012 14:19:51] WARNING: [pool www] child 32179 exited on signal 11 (SIGSEGV) after 3.217902 seconds from start [07-Jun-2012 14:19:51] NOTICE: [pool www] child 32351 started My nginx conf: user nginx; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/access.log main; sendfile on; keepalive_timeout 65; fastcgi_buffers 8 16k; fastcgi_buffer_size 32k; include /etc/nginx/conf.d/*.conf; server { listen 443 ssl; listen 80; server_name testsite.net www.testsite.net; ssl on; ssl_certificate /var/www/html/admin/ssl/certificate.pem; ssl_certificate_key /var/www/html/admin/ssl/privatekey.pem; ssl_session_timeout 1m; ssl_protocols SSLv2 SSLv3 TLSv1; ssl_ciphers HIGH:!aNULL:!MD5:!kEDH; ssl_prefer_server_ciphers on; access_log off; location ~ \.php$ { root /var/www/html; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include /etc/nginx/fastcgi_params; } location / { root /var/www/html; index index.php; } } } php.ini is standard, with cgi.fix_pathinfo=0 php-fpm.conf: include=/etc/php-fpm.d/*.conf [global] pid = /var/run/php-fpm/php-fpm.pid error_log = /var/log/php-fpm/error.log log_level = notice php-fpm.d/www.conf: [www] listen = 127.0.0.1:9000 listen.allowed_clients = 127.0.0.1 user = nginx group = nginx pm = dynamic pm.max_children = 10 pm.start_servers = 1 pm.min_spare_servers = 1 pm.max_spare_servers = 10 slowlog = /var/log/php-fpm/www-slow.log php_flag[display_errors] = on php_admin_value[error_log] = /var/log/php-fpm/www-error.log php_admin_flag[log_errors] = on

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >