sony - Page 18 - Developer IT

Bad sound quality of 3.5mm headphone with mic on laptop

- by Isaac

I have a set of headphones that have a built-in mic for hands-free calling. They just work great on my Sony Ericsson Cedar cellphone. The problem is that when I connect headphone to my Dell N5010 laptop to listen to music, the quality is horrible, with very weak or no vocals. They funny part is when I hold down the talk button on the mic (headphone mic), at which point it sounds great, but goes back to bad quality as soon as I release talk button. Also, when I take out the jack a little, at some point, the sound is great but I have to hold the jack there. I looked for any configuration on the sound card driver but find nothing. Besides using a glue to hold down the talk button of mic :), is there any other solution?

Read the article

How to quickly switch monitors on multi-monitor setup? (W7)

- by Saxtus

At my desktop PC, I have 3 displays hooked up on my Palit GeForce GTX 480 to extend my desktop: DVI: Samsung SyncMaster T220 (22" 16:10, 1680x1050, as my main) DVI: Samsung SyncMaster 940BF (19" 4:3, 1280x1024) HDMI: Sony Bravia KDL-32D3000 (32" 16:9, 1360x768) As expected, the GFX card can only utilize 2 of the displays at any given time, so I have to manually switch using Windows' "Display Properties" dialog, each time I want to switch between them. I've tried UltraMon, DisplayFusion and PowerStrip (so please don't refer me to a question where those are given as solutions) but they are unable to switch monitors. Instead they can only change display resolutions and settings on the existing active monitors, with specially weird results when I've saved the monitor states and then tried to switch monitors using the saved states! Any idea on how to bypass the awful "Display Properties" dialog and it's "confirm your change" timer? Thanks in advance.

Read the article

How to reduce the fan noise and how to increase battery life in ubuntu 11.10/12.04?

- by mehdi

I have a brand new Sony Vaio S series laptop.(VPCSA2DGX) It came factory installed with Windows 7 professional Edition 64bit. Runs Intel core i5, 500 GB HDD , 4GB Ram. First I installed ubuntu 11.10 64 bit along side Windows to dual boot. Later,since the problem did not solve, I installed ubuntu 12.04 64bit along side Windows to dual boot. However the problem keeps annoying me. Problem: When running ubuntu 11.10/12.04, the battery lasts only about 1.5 hours. The Fan runs loud and continuously. And there is a lot of heat generated. System monitor shows less than 5% CPU used. My laptop enjoys hybrid graphic and I tried turning off ADM graphic card and keep Intel graphic card on. However I can not get the Fan noise or heat to go away and consequently the battery drain continues. BTW, in windows, the laptop gives 4-5 hours of battery power, Fan is silent and there is no heat problem. Any ideas on how to reduce the fan noise and how to increase battery life in ubuntu 11.10/12.04?

Read the article

Multiple monitors showing same screen but different resolutions

- by Luis Alvarado

Is it possible to have 2 or more monitors showing the same screen, for example the same desktop but with different resolutions. Like the clone option in Nvidia or the mirror option using the Display settings in Ubuntu but instead of showing the same output with the same resolution, the both show the same output using a resolution that is native for each monitor connected. In my case if I have a netbook that has max resolution of 1360x768 and a TV that has 1280x1024, the would both show the same desktop but each with their own resolution that is compatible for each device. This would help in trying to find a resolution that works on both monitors and in cases like a mini netbook and a huge TV it would solve issues like having max 800x600 in one monitor and min 1024x768 in the other. In the case I tested I was using an HDMI cable but this question also involves VGA and any other connection. I have 3 tests scenarios for this: Scenario 1 - Laptop HP DV6000 (Intel Integrated Video) with 1360x760 connected to a Samsung LED 42 TV that has 1280x900. Scenario 2 - Laptop EEE with 1024x600 (Intel Integrated Video) connected to Sony LCD TV that supports 1280x900. Scenario 3 - Intel Desktop with Nvidia 440 GT with HDMI connected to Soneview 32' TV that supports 1920x1080 and VGA connected to an Epson Video Beam that supports 1280x1024 max. In this 3 scenarios I need to be able to show the same desktop and same views but on different resolutions for each output device. UPDATE: Tested with Xubuntu and the way it handles multiple monitors is precisely what I am asking. The ability to handle the resolution of different monitors showing the same thing.

Read the article

Can't shutdown Ubuntu (Wubi Installation)

- by zsgre3nd3s7

I downloaded Ubuntu 12.04 using Wubi. The installation went correctly and everything was working fine until I tried to shutdown. I clicked shutdown and then Ubuntu started shutdown, but as soon as I saw the Ubuntu logo with blank dots under, it froze. I had to perform a hard shutdown. After booting my computer back and going into Ubuntu, I tried shutting it down again but this time it took me on a black page with lots and lots of log writing on the screen and after a little while, it stopped writing stuff. I was able to input characters using the keyboard and everything, but it never shutdown. I had to perform a hard shutdown again. Now it always gives me a Ubuntu logo and freezes. What should I do? I know hard shutdowns are bad and want to avoid them. Is there anyway to make shutdowns work? I tried a reboot and it also froze on the Ubuntu logo. Sony VAIO Model E SVE17115FDB Laptop. Graphic card - AMD RADEON HD 7650M (and it installed correctly in Ubuntu). BIOS - H2O Bios. Processor - Intel i7-3612QM. Edit: I only installed the AMD/ATI proprietary drivers FGLRX, not the AMD/ATI post release drivers because they keep showing an error message. Here is jockey.log. Edit 2: Here is the log that i mentioned before that appeared on my screen, it appeared after i tried reinstalling my AMD driver but failed so i reinstalled the other one. Sorry for the quality i took those pictures with my phone.

Read the article

Why, when on Kubuntu I lose internet connection, am I unable to reconnect?

- by Jonathan

Using Kubuntu 11.10. Sony Vaio computer. Network controller: Intel Corporation WiFi Link 5100. If I connect to a wireless network, and the signal drops, then I am unable to connect to any network without a reboot. I can assure that the issue has nothing to do with the computer going to sleep, as I have experienced the above while using my computer continuously. Here is exactly what happens: Connect to network (at University, where the connection is not so great). The connection is broken There are three other possible networks available, but none of them can be connected to. I have tried off and on sometimes for hours. I am always able to reestablish a connection after a reboot. I can only think of two explanations. The first is that a temp file is corrupted when the internet connection is abruptly dropped. The second is that my computer actually corrupts something before the loss of internet connection, which causes the loss in signal, and inability to reconnect. However, I am not confident that my explanations are complete, nor do I have any idea how to test these things.

Read the article

Windows 7 Green Load Bar Stuck and never finish loading,

- by Levan

Here is my issues, which i am currently having, in my windows 7, When i go to one specific folder, .Please take a look, This is not my file, but just to get an idea, there is 10 file max no more than 500 MB, i am not able to remove it, or cut it, or move it, it starts that green bar loading and never finish, The problem is, after getting into this folder, my SONY VAIO starts, overheating and if i did not restart, nothing can stop it to be cool down . I have reinstalled windows 2 weeks ago, i don't think this should be issue regarding it. Please, help me what the hell i should do with this GREEN BAR< to stop this headache,

Read the article

How much does it wear an SD card to be frequently removed/reinserted?

- by jtbandes

My digital camera (a Sony a55) stores photos on an SD card. When I want to transfer these to my computer (a mid-2010 MacBook Pro), I have two options: use the USB cable to connect the camera to the computer, or use the computer's built-in SD card reader. The camera's SD card slot is the standard click-in, click-out (spring-loaded) mechanism. My laptop has a simple slot into which the card slides with a little more resistance than the former (the card slides only about halfway in so it can be easily removed). I notice that the card's contacts now have some shiny marks from one or both of these card slots: Does this type of wear threaten to significantly damage the card? Should I avoid switching the card between slots frequently, to extend its lifetime?

Read the article

Not able to connect to internet in RHEL 5

- by chankey007

I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

Read the article

Not able to connect to internet in RHEL 5

- by chankey007

I just installed red hat enterprise 5 in my laptop and on desktop both. In desktop it is working fine but in laptop it is not showing the eth device. (I tried ifconfig only lo is there). I tried ifup eth0 still nothing happened. The network service in /etc/sysconfig/network-scripts/ifcfg-eth0 and in /etc/sysconfig/network are enable. I had ubuntu in my laptop before and I faced same problem with that too. Is there any problem with my laptop? I have my system on dual boot and in win7 networking is running fine. I am not able to connect to the internet only, other devices are working fine. System conf: Sony vaio E series. 3 GB RAM, intel core i3 2.13 GHZ.

Read the article

Getting "Unable to find a medium containing a live file system" when installing 10.10

- by Krastin Konstantinov

I got this error while trying to install ubuntu 10.10 from a bootable USB stick on to Sony Vaio P series laptop. The disk boots into the language and installation type screen. After that it goes through the splash and pulls up this error: BusyBox v1.13.3 (Ubuntu 1:1.13.3-ubuntu11) built in shell (ash) Enter 'help' for a list of built-in commands. (initramfs) Unable to find a medium containing a live file system After getting this error the installation fails to start. I have used the same USB stick on some other laptops and the installation started as usual. Any help will be appreciated. My installation is i386 and my machine is Vaio P VGN-P610. I've tried every possible thing: Bios: [enable boot external] Boot order: [external] [hard drive] [network boot] Tried 2 different USB drives Tried 2 different external CD drives Tried 6 different downloads of both the desktop and netbook remix. All downloads were checked with MD5SUM. Ubuntu Desktop 9.10 installs properly in every version and from every source. Getting reaaaally frustrated.

Read the article

Slow Internet connection

- by Muthu Kumaran P

My internet connectivity from my Laptop slowed down overnight. I have no clue as what had happened. I was able to download at 300kbps the day before yesterday. And from yesterday on, my internet has been slow. My download speed is at 25kbps. Can someone help me to resolve this issue? I am using wireless connection on my Sony Vaio. I am not sure what else info I need to give as this is my first time to post a question here..

Read the article

Windows 8 sleep, blank screen on resume

- by Waqar Hameed

I use a SONY VAIO laptop VPCS116FA that came pre-installed with Windows 7. I have upgraded to Windows 8. The experience has been good so far but I am facing a frustrating problem. Whenever, I put my computer to sleep, it won't wake up and I have to restart it. Note that this does not affect hibernation which works perfectly fine. However, it is not a perfect alternative to sleep option. I have tried this method to resolve the problem but in vain: http://www.thulasidas.com/2009-03/blank-screen-after-hibernatesleep.htm I really am in need for a solution to this problem. Please suggest whatever you think can resolve this.

Read the article

Upgrade to 0.25, files served to uPNP devices cannot play

- by David Buttrick

I have a Sony BDP-S390 bluray & network player. I upgraded my Myth server to 0.25. When I browse to the Myth server, and try to play a recording, I get an error message about the file not being payable in the player. Interestingly, the files that i have recorded, and the videos that I have loaded into my Video volume group are .mpg or .mp4. The player shows the filetype that it thinks the file is in it's list, and it claims that these files are AVI files, however none of them are. They are all .mp4 or .mpg files. Thinking that that was just an optical illusion, I went ahead and tried to play a file, but I get an error about the file not being playable. First of all, is there something that I need to do to make the uPNP server know about different filetypes? Is it reporting AVI because it hasn't been told about MPG or MP4? Second, I'd like to help out some more here and collect some logging about the uPNP server in the myth server. I cant seem to find information on how to turn on logging, and there is no mythbackend settings file int /etc/default. Thanks very much.

Read the article

Ubuntu 10.04 User Interface errors

- by user306668

Hi Guys Using Ubuntu 10.04 Beta on a Sony Vaio laptop (slightly old PCG-4n7M). It was working wonderfully until this morning. After updating and upgrading the login screen images gave broken image icons, then on logging in UI was replaced with just the cmd shell. All menus are gone. I have tried to reconfigure xserver-xorg and that doesn't work. Reinstalling doesn't either. I have tried a number of other attempts. What is weird is that I can launch graphical applications from the cmd line. such as firefox or google-chrome. and they work but the UI is simplified or broken (no resizing, closing, minimizing). I am a bit lost on how to fix this error. If anyone has any suggestions, please let me know

Read the article

Hybrid Graphics on Ubuntu 12.04 switching to discrete

- by cfstras

I have a Sony Vaio VPCCB-27FX with hybrid graphics. Using vgaswitcheroo enables me to switch my discrete card off to save power. Now when i want to switch to the discrete card for performance, my system freezes. I already tried logging out and killing x with service lightdm stop, but still, it freezes as soon as I echo DIS > switch. typing blindly, echo IGD > switch returns me to my console where it reads [ 179.555171] i915: switched off, but it seems the discrete card never gets switched on... running echo DDIS > switch gives me the following: [540....] [drm:atop_op_jump] *ERROR* atombios stuck in loop for more than 5secs aborting [540....] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing CEE2 (len 62, WS 0, PS 0) @ 0xCEFE [540....] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing BBF6 (len 1036, WS 4, PS 0) @ 0xBCF3 [540....] [drm:atom_execute_table_locked] *ERROR* atombios stuck executing BB8C (len 76, WS 0, PS 0) @ 0xBB94 [541....] [drm:r600_RING_TEST] *ERROR* radeon: ring test failed (scratch(0x8504)=0xFFFFFFFF) [541....] [drm:evergreen_resume] *ERROR* evergreen startup failed on resume after that, the atombios part repeats a few times. also, the terminal locks up again and sysrq+REISUB is my only rescue. Has anybody an idea how I can switch to my discrete card without the system locking up? #uname -srvmpio Linux 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux #lsb_release -r Description: Ubuntu 12.04 LTS

Read the article

Unable to copy and paste (or cut and paste) photos already reduced in size from Word document into a

- by Simon Child

Hello I cannot copy photos and paste them from a word document into the text of an email on my Sony Laptop having already substantially redcued the size of the photos using Microsoft Office Picture Manager. I can readily manage to perform this functjon from my work place PC but am presently working mostly from home. I am trying to email photos and text using a btinternet.com email address but have checked that I cannot perform the task using my alternate googlemail email address either. I can obviously highlight the relevant photographs but whenever I try to copy or cut them into the email text the paste function is disabled. Assistance would be much appreciated. Kind regards Simon

Read the article

Logitech Revue - tv picture extends too far off left/right side of tv?

- by super user

Hi, I got a logitech revue (for google tv). I hooked it up, works ok, but the picture is not fitting horizontally in my hdtv. The hdtv is a Sony Bravia, 2010 model. The tv picture is fitting vertically just fine, but it looks like the left and right ends of the picture extend way off farther than they should be. In other words, it looks like the picture is starting about 4 inches to the left of the left side of the tv, and extends 4 inches past the right edge of the tv. I know in menu - settings you have an option to "maximize" your picture, which works for the vertical directions, but the horizontal directions seem convinced that they're maximized properly and I cannot adjust. Any help here? Thanks

Read the article

Managed Cloud Services Wins Another Prestigious Industry Award

- by Dori DiMassimo-Oracle

Over the last 90 days, Oracle Managed Cloud Services has been the proud recipient of TWO prestigious industry awards for service excellence and customer value leadership. The most recent award is last month's 2014 Frost & Sullivan Best Practice Award - North America Managed Cloud Customer Value Leadership Award, which rated Oracle Managed Cloud Services as the clear leader versus other providers; Managed Cloud received an "exceptional" rating in 9 of 10 evaluation categories. The research report is an excellent look at our industry and what is valued by cloud customers looking for a managed solution. In April, Managed Cloud was a repeat winner of the Outsourcing Excellence Award - 2014 Outsourcing Excellence Award - Best ITO Infrastructure (Sony Computer Entertainment America). Last year we won the award for Best Cloud: 2013 Outsourcing Excellence Award - Best Cloud (Take-Two Interactive) These awards are a great testimony of the transformation of Managed Cloud Services to a true Cloud-based business and a strategic and relevant part of the Oracle Cloud Solutions portfolio. Frost & Sullivan, in particular, recognizes our vision and our capability of successfully managing business transactions in the cloud.

Read the article

Second Monitor Detected, but not receiving a signal after upgrading to 12.04

- by user62458

After I upgraded to 12.04, my second monitor is detected (in display settings), but will not power on. I have scoured the Internet and forums for a solution and I can't find anything. I have found a couple people with the same problem, but never a solution for it. I am no expert, but I'm certainly not a noob. My computer uses AMD Radeon 6250 graphics, but I do NOT want to use the proprietary graphics drivers. They refuse to work properly with my second monitor (they ATI drivers will only mirror screens, and I've done everything to try to fix it, and I DON't want mirrored screens) Not to mention that the default open-source video drivers seem to work much better than the proprietary anyway! Again, Ubuntu's default video drivers work fine, and they even DETECT the second monitor (Dell 19'). I can drag stuff off the screen and put it on the 'space' of the second monitor and even a screen-shot shows that there are two monitors active; but the monitor is OFF. It will not power on. It goes into 'power-save' mode because it is not receiving a signal. For some reason it is not getting the signal to power on, even though Ubuntu thinks the monitor is working properly. I had this working fine on my Sony VAIO yesterday (with Radeon graphics/default Ubuntu video drivers). I upgraded to a Samsung Series 3 and now I have this issue. I can't for the life of me figure out why the monitor is connected, detected and I have screen space for the monitor, but the screen won't turn on! XRANDR Output: Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 VGA-0 connected (normal left inverted right x axis y axis) 1440x900 59.9 + 75.0 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 LVDS connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 1366x768 60.1*+ 1280x720 59.9 1152x768 59.8 1024x768 59.9 800x600 59.9 848x480 59.7 720x480 59.7 640x480 59.4 HDMI-0 disconnected (normal left inverted right x axis y axis)

Read the article

Ubuntu 9.10 freezes when HDMI port is connected

- by Felipe Hummel

Hi, I have a Sony Vaio FW350 with a HDMI output. I'm trying to use it under Ubuntu 9.10 with a LG LCD monitor 21,5'. I've tried two approaches: Boot the laptop with the HDMI cable connected and monitor turned on. Result: LCD Monitor keeps turned on but the whole screen is black and Ubuntu do not seem to be initializing. Boot Ubuntu until the end. I then connect the HDMI cable into the Laptop. The mouse and the whole system freezes. In both cases the only way to turn off the laptop is holding the power button. I've looked around the internet for similar problems, but only found workarounds for the same problem with VGA input, not HDMI. I also tried to use metacity before connecting the cable, but still got the same result. Any hints?

Read the article

Dual Booting Windows 7 and Ubuntu 12.04. Partition Sizes?

- by John F.

I'm about to reinstall Windows, so I thought that I'd try Ubuntu out on a partition just for fun. My question is, how large should my partitions be for each of them? I know this various depending on what you use, so i'll give you a general idea of what I have, and what I have in mind. I'm currently running: Windows 7 Professional (64bit) RAM: 4GB CPU: 2.5Ghz Quad Core processor HDD: 500GB GPU: 1GB Nvidia GeForce I have around 130GB in Steam games, and some heavier applications like Photoshop CS6, Sony Vegas Pro 11. But other Applications I use are: Chrome Skype Dxtory Fraps OpenOffice BitTorrent and other assorted smaller programs. So, I was thinking that I would give my Windows partition about 150-200GB, my Ubuntu Partition around 20GB, and the rest to shared storage. I'm not really sure if I'd need more or less on Ubuntu, because I've never used it and I'm not really sure what kind of apps i'd be using over there. This would also be a clean install, so I'd be wiping my HDD, creating the Partitions in GParted, then installing Windows with Ubuntu following that. Any critique you could give me? Maybe explanations to what the /root, /boot and /home partitions I hear are about? Thanks in advanced if you actually read this lengthy thing! Any help is appreciated. (x

Read the article

Brightness going up to 100% on loading certain websites in Chrome

- by picheto

I'm using Google Chrome version 21.0.1180.89 on Ubuntu 12.04 and my laptop is a Sony VAIO VPCCW15FL (spec sheet). My video driver is the propietary "NVIDIA accelerated graphics driver (post-release updates)(version-current updates)". After installing Ubuntu, I discovered that neither the brightness control buttons (hardware) or the brightness slider (software) worked, and found out I could get the hardware buttons to work by installing the nvidiabl.deb package and oBacklight script. I'm using nvidiabl-dkms 0.77 and oBacklight 0.3.8. Still, the slider on the Ubuntu "Settings" does not work, but I don't care. There is an annoying thing happening when loading certain pages in Google Chrome: the brightness goes up to 100% when loading the webpage or when leaving it (closing the tab or typing a different URL on the omnibox). However, the "brightness tooltip" (that default brightness notification) remembers the position it was set to, so if I adjust the brightness with the HW buttons, the level gets adjusted relative to the value it was set to before "going 100%". I disabled the flash PPAPI plugin, but left the NPAPI plugin enabled, and the problem went away for pages with flash content. Still, the same thing happens when viewing HTML5 video, or when loading, for example, the Chrome Web Store or using the Scratchpad extension. I suppose it has to do with the rendering of certain elements using the GPU, but this is just a guess. This brightness thing does not happen when using Firefox 15.0 or any other application I have used yet. Does anybody know why this may be happening and what could I do to fix this without changing browser? Thanks a lot.

Read the article

alsa - sound issues on ubuntu 12.04

- by tam_ubuuser

i am having an sony E series laptop.i have an HDMI port .at this stage ,i have tested my sound card , which provides audio out on my laptop i.e i could hear songs .my laptop has two sound cards amd 5450 and an intel-hda(alsamixer shows that as s/pdif) . i decided to connect HDMI output to my new HD-TV.but, i could get only visuals on my TV,NO AUDIO OUTPUT ( HDMI cable works fine with win 7).my laptop has two sound cards.but i couldn't switch output to other card.( i don't know ,how to do that) i decided to update alsa. complied the following code in terminal. sudo apt-add-repository ppa:ubuntu-audio-dev/alsa-daily sudo apt-get update sudo apt-get install alsa-hda-dkms then,strangely no login sound, and no audio output on my laptop at all .then, started complied code from step1 sound troubleshooting procedure from offical ubuntu site.then, my speaker icon taskbar disappeared .obivously $aplay -l ,provided output as no soundcards detected . so , i implemented step 4 from that guide, it provides a output of all hardware devices in my laptop. *-multimedia UNCLAIMED description: Audio device product: Cedar HDMI Audio [Radeon HD 5400/6300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: latency=0 resources: memory:f0040000-f0043fff *-multimedia UNCLAIMED description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f5e00000-f5e03fff that command displayed output name of the two cards . but , still i have no positive output on $aplay -l. so therfore, i think alsa couldn't detect my sound cards . is there solution to this problem? it could be better,if alsa would channel output from multiple sound cards ? how should install and configure alsa such that detects HDMI cable as soon i connect to my HD tv? is it possible to alsa and pluseaudio 2.0 to co-exist, if so how?

Search Results

Search found 562 results on 23 pages for 'sony'.

Page 18/23 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 | Next Page >

- by Isaac

- by Saxtus

- by mehdi

- by Luis Alvarado

- by zsgre3nd3s7

- by Jonathan

- by Levan

- by jtbandes

- by The Geek

- by chankey007

- by chankey007

- by Krastin Konstantinov

- by Muthu Kumaran P

- by Waqar Hameed

- by David Buttrick

- by user306668

- by cfstras

- by Simon Child

- by super user

- by Dori DiMassimo-Oracle

- by user62458

- by Felipe Hummel

- by John F.

- by picheto

- by tam_ubuuser

< Previous Page | 14 15 16 17 18 19 20 21 22 23 | Next Page >