Search Results

Search found 528 results on 22 pages for 'tune'.

Page 18/22 | < Previous Page | 14 15 16 17 18 19 20 21 22  | Next Page >

  • SQLS Timeouts - High Reads in Profiler

    - by lb01
    I've audited a SQLS2008 server with Profiler for one day.. the overhead didn't seem to trouble this new client my company has. They are using a legacy VB6 application as a front-end. They're experiencing timeouts once SQLS RAM usage is high. The server is currently running x64 sqls2008 on a VM with nearly 9 GB of RAM. SQL Server's 'max server memory option' is currently set to 6GB. I've put the results of the trace in a table and queried them using this query. SELECT TextData, ApplicationName, Reads FROM [TraceWednesday] WHERE textdata is not null and EventClass = 12 GROUP BY TextData, ApplicationName, Reads ORDER BY Reads DESC As I expected, some values are very high. Top Reads, in pages. 2504188 1965910 1445636 1252433 1239108 1210153 1088580 1072725 Am I correct in thinking that the top one (2504188 pages) is 20033504 KB, which then is roughly ~20'000 MB, 20GB? These queries are often executed and can take quite some time to run. Eventually RAM is used up because of the cache fattening, and timeouts occur once SQL cannot 'splash' pages in the buffer pool as much. Costs go up. Am I correct in my understanding? I've read that I should tune the associated T-SQL and create appropriate indices. Obviously cutting down the I/O would make SQL Server use less RAM. OR, maybe it might just slow down the process of chewing up the whole RAM. If a lot less pages are read, maybe it'll all run much better even when usage is high? (less time swapping, etc.) Currently, our only option is to restart SQL once a week when RAM usage is high, suddenly the timeouts disappear. SQL breathes again. I'm sure lots of DBAs have been in this situation.. I'm asking before I start digging out all of the bad T-SQL and put indices here and there, is there is something else I can do? Any advice except from what I know (not much yet..) Much appreciated. Leo.

    Read the article

  • SQLS Timeouts - High Reads in Profiler

    - by lb01
    Hi I've audited a SQLS2008 server with Profiler for one day.. the overhead didn't seem to trouble this new client my company has. They are using a legacy VB6 application as a front-end. They're experiencing timeouts once SQLS RAM usage is high. The server is currently running x64 sqls2008 on a VM with nearly 9 GB of RAM. SQL Server's 'max server memory option' is currently set to 6GB. I've put the results of the trace in a table and queried them using this query. SELECT TextData, ApplicationName, Reads FROM [TraceWednesday] WHERE textdata is not null and EventClass = 12 GROUP BY TextData, ApplicationName, Reads ORDER BY Reads DESC As I expected, some values are very high. Top Reads, in pages. 2504188 1965910 1445636 1252433 1239108 1210153 1088580 1072725 Am I correct in thinking that the top one (2504188 pages) is 20033504 KB, which then is roughly ~20'000 MB, 20GB? These queries are often executed and can take quite some time to run. Eventually RAM is used up because of the cache fattening, and timeouts occur once SQL cannot 'splash' pages in the buffer pool as much. Costs go up. Am I correct in my understanding? I've read that I should tune the associated T-SQL and create appropriate indices. Obviously cutting down the I/O would make SQL Server use less RAM. OR, maybe it might just slow down the process of chewing up the whole RAM. If a lot less pages are read, maybe it'll all run much better even when usage is high? (less time swapping, etc.) Currently, our only option is to restart SQL once a week when RAM usage is high, suddenly the timeouts disappear. SQL breathes again. I'm sure lots of DBAs have been in this situation.. I'm asking before I start digging out all of the bad T-SQL and put indices here and there, is there is something else I can do? Any advice except from what I know (not much yet..) Much appreciated. Leo.

    Read the article

  • How to Create Auto Playlists in Windows Media Player 12

    - by DigitalGeekery
    Are you getting tired of the same old playlists in Windows Media Player? Today we’ll show you how to create dynamic auto playlists based on criteria you choose in WMP 12 in Windows 7. Auto Playlists In Library view, click on Create playlist dropdown arrow and select Create auto playlist. On the New Auto Playlist window type in a name for the playlist in the text box. Now we need to choose our criteria by which to filter your playlist. Select Click here to add criteria. For our example, we will create a playlist of songs that were added to the library in the last week from the Alternative genre. So, we will first select Date Added from the dropdown list. Many criteria will have addition options to configure. In the example below you will see that we have a few options to fine tune.   We will filter all the songs added to the library in the last 7 days. We will select Is After from the first dropdown list. Then select Last 7 Days from the second dropdown list. You can add multiple criteria to further filter your playlist. If you can’t find the criteria you are looking for, select “More” at the bottom of the dropdown list.   This will pull up a filter window with all the criteria. Select a filter and then click OK when finished.   From the Genre dropdown, we will select Alternative. If you’d like to add Pictures, Videos, or TV Shows to your auto playlists you can do so by selecting them from the dropdown list under And also include. You will then be able to select criteria for your pictures, videos, or TV shows from the dropdown list.   Finally, you can also add restrictions to your music such as the number of items, duration, or total size. We will limit the duration of our playlist to one hour by selecting Limit Total Duration To… Then type in 1 hour…Click OK.   Our library is automatically filtered and a playlist is created based on the criteria we selected. When additional songs are added to the Windows Media Player library, any of new songs that fit the criteria will automatically be added to the New Songs playlist. You can also save a copy of an auto playlist as a regular playlist. Switch to Playlists view by clicking Playlists from either the top menu or the navigation bar. Select the Play tab and then click Clear list to remove any tracks from the list pane.   Right-click on the playlist you want to save, select Add to, and then Play list. The songs from your auto playlist will appear as an Unsaved list on the list pane. Click Save list. Type in a name for your playlist. Your auto playlist will continue to change as you add or remove items from your Media Player library that meet the criteria you established. The new saved playlist we just created will stay as it is currently. Editing a Auto playlist is easy. Right-click on the playlist and select Edit. Now you are ready to enjoy your playlist. Conclusion Auto playlists are great way to keep your playlists fresh in Windows Media Player 12. Users can get creative and experiment with the wide variety of criteria to customize their listening experience. If you are new to playlists in Windows Media Player, you may want to check our our previous post on how to create custom playlists in Windows Media Player 12. Are you looking to get better sound from WMP 12? Take a look at how to improve playback using enhancements in Windows Media Player 12. Similar Articles Productive Geek Tips Create Custom Playlists in Windows Media Player 12Fixing When Windows Media Player Library Won’t Let You Add FilesInstall and Use the VLC Media Player on Ubuntu LinuxMake Windows Media Player Automatically Open in Mini Player ModeMake VLC Player Look like Windows Media Player 10 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics Create Ringtones For Your Android Phone With RingDroid

    Read the article

  • What’s New for Oracle Commerce? Executive QA with John Andrews, VP Product Management, Oracle Commerce

    - by Katrina Gosek
    Oracle Commerce was for the fifth time positioned as a leader by Gartner in the Magic Quadrant for E-Commerce. This inspired me to sit down with Oracle Commerce VP of Product Management, John Andrews to get his perspective on what continues to make Oracle a leader in the industry and what’s new for Oracle Commerce in 2013. Q: Why do you believe Oracle Commerce continues to be a leader in the industry? John: Oracle has a great acquisition strategy – it brings best-of-breed technologies into the product fold and then continues to grow and innovate them. This is particularly true with products unified into the Oracle Commerce brand. Oracle acquired ATG in late 2010 – and then Endeca in late 2011. This means that under the hood of Oracle Commerce you have market-leading technologies for cross-channel commerce and customer experience, both designed and developed in direct response to the unique challenges online businesses face. And we continue to innovate on capabilities core to what our customers need to be successful – contextual and personalized experience delivery, merchant-inspired tools, and architecture for performance and scalability. Q: It’s not a slow moving industry. What are you doing to keep the pace of innovation at Oracle Commerce? John: Oracle owes our customers the most innovative commerce capabilities. By unifying the core components of ATG and Endeca we are delivering on this promise. Oracle Commerce is continuing to innovate and redefine how commerce is done and in a way that drive business results and keeps customers coming back for experiences tailored just for them. Our January and May 2013 releases not only marked the seventh significant releases for the solution since the acquisitions of ATG and Endeca, we also continue to demonstrate rapid and significant progress on the unification of commerce and customer experience capabilities of the two commerce technologies. Q: Can you tell us what was notable about these latest releases under the Oracle Commerce umbrella? John: Specifically, our latest product innovations give businesses selling online the ability to get to market faster with more personalized commerce experiences in the following ways: Mobile: the latest Commerce Reference Application in this release offers a wider range of examples for online businesses to leverage for iOS development and specifically new iPad reference capabilities. This release marks the first release of the iOS Universal application that serves both the iPhone and iPad devices from a single download or binary. Business users can now drive page content management and layout of search results and category pages, as well as create additional storefront elements such as categories, facets / dimensions, and breadcrumbs through Experience Manager tools. Cross-Channel Commerce: key commerce platform capabilities have been added to support cross-channel commerce, including an expanded inventory model to maintain inventory for stores, pickup in stores and Web-based returns. Online businesses with in-store operations can now offer advanced shipping options on the web and make returns and exchange logic easily available on the web. Multi-Site Capabilities: significant enhancements to the Commerce Platform multi-site architecture that allows business users to quickly launch and manage multiple sites on the same cluster and share data, carts, and other components. First introduced in 2010, with this latest release business users can now partition or share customer profiles, control users’ site-based access, and manage personalization assets using site groups. Internationalization: continued language support and enhancements for business user tools as well and search and navigation. Guided Search now supports 35 total languages with 11 new languages (including Danish, Arabic, Norwegian, Serbian Cyrillic) added in this release. Commerce Platform tools now include localized support for 17 locales with 4 new languages (Danish, Portuguese (European), Finnish, and Thai). No development or customization is required in order for business users to use the applications in any of these supported languages. Business Tool Experience: valuable new Commerce Merchandising features include a new workflow for making emergency changes quickly and increased visibility into promotions rules and qualifications in preview mode. Oracle Commerce business tools continue to become more and more feature rich to provide intuitive, easy- to-use (yet powerful) capabilities to allow business users to manage content and the shopping experience. Commerce & Experience Unification: demonstrable unification of commerce and customer experience capabilities include – productized cartridges that provide supported integration between the Commerce Platform and Experience Management tools, cross-channel returns, Oracle Service Cloud integration, and integrated iPad application. The mission guiding our product development is to deliver differentiated, personalized user experiences across any device in a contextual manner – and to give the business the best tools to tune and optimize those user experiences to meet their business objectives. We also need to do this in a way that makes it operationally efficient for the business, keeping the overall total cost of ownership low – yet also allows the business to expand, whether it be to new business models, geographies or brands. To learn more about the latest Oracle Commerce releases and mission, visit the links below: • Hear more from John about the Oracle Commerce mission • Hear from Oracle Commerce customers • Documentation on the new releases • Listen to the Oracle ATG Commerce 10.2 Webcast • Listen to the Oracle Endeca Commerce 3.1.2 Webcast

    Read the article

  • Management and Monitoring Tools for Windows Azure

    - by BuckWoody
    With such a large platform, Windows Azure has a lot of moving parts. We’ve done our best to keep the interface as simple as possible, while giving you the most control and visibility we can. However, as with most Microsoft products, there are multiple ways to do something – and I’ve always found that to be a good strength. Depending on the situation, I might want a graphical interface, a command-line interface, or just an API so I can incorporate the management into my own tools, or have third-party companies write other tools. While by no means exhaustive, I thought I might put together a quick list of a few tools you can use to manage and monitor Windows Azure components, from our IaaS, SaaS and PaaS offerings. Some of the products focus on one area more than another, but all are available today. I’ll try and maintain this list to keep it current, but make sure you check the date of this post’s update – if it’s more than six months old, it’s most likely out of date. Things move fast in the cloud. The Windows Azure Management Portal The primary tool for managing Windows Azure is our portal – most everything you need is there, from creating new services to querying a database. There are two versions as of this writing – a Silverlight client version, and a newer HTML5 version. The latter is being updated constantly to be in parity with the Silverlight client. There’s a balance in this portal between simplicity and power – we’re following the “less is more” approach, with increasing levels of detail as you work through the portal rather than overwhelming you with a single, long “more is more” page. You can find the Portal here: http://windowsazure.com (then click “Log In” and then “Portal”) Windows Azure Management API You can also use programming tools to either write your own interface, or simply provide management functions directly within your solution. You have two options – you can use the more universal REST API’s, which area bit more complex but work with any system that can write to them, or the more approachable .NET API calls in code. You can find the reference for the API’s here: http://msdn.microsoft.com/en-us/library/windowsazure/ee460799.aspx  All Class Libraries, for each part of Windows Azure: http://msdn.microsoft.com/en-us/library/ee393295.aspx  PowerShell Command-lets PowerShell is one of the most powerful scripting languages I’ve used with Windows – and it’s baked into all of our products. When you need to work with multiple servers, scripting is really the only way to go, and the Windows Azure PowerShell Command-Lets allow you to work across most any part of the platform – and can even be used within the services themselves. You can do everything with them from creating a new IaaS, PaaS or SaaS service, to controlling them and even working with security and more. You can find more about the Command-Lets here: http://wappowershell.codeplex.com/documentation (older link, still works, will point you to the new ones as well) We have command-line utilities for other operating systems as well: https://www.windowsazure.com/en-us/manage/downloads/  Video walkthrough of using the Command-Lets: http://channel9.msdn.com/Events/BUILD/BUILD2011/SAC-859T  System Center System Center is actually a suite of graphical tools you can use to manage, deploy, control, monitor and tune software from Microsoft and even other platforms. This will be the primary tool we’ll recommend for managing a hybrid or contiguous management process – and as time goes on you’ll see more and more features put into System Center for the entire Windows Azure suite of products. You can find the Management Pack and README for it here: http://www.microsoft.com/en-us/download/details.aspx?id=11324  SQL Server Management Studio / Data Tools / Visual Studio SQL Server has two built-in management and development, and since Version 2008 R2, you can use them to manage Windows Azure Databases. Visual Studio also lets you connect to and manage portions of Windows Azure as well as Windows Azure Databases. You can read more about Visual Studio here: http://msdn.microsoft.com/en-us/library/windowsazure/ee405484  You can read more about the SQL tools here: http://msdn.microsoft.com/en-us/library/windowsazure/ee621784.aspx  Vendor-Provided Tools Microsoft does not suggest or endorse a specific third-party product. We do, however, use them, and see lots of other customers use them. You can browse to these sites to learn more, and chat with their folks directly on how they support Windows Azure. Cerebrata: Tools for managing from the command-line, graphical diagnostics, graphical storage management - http://www.cerebrata.com/  Quest Cloud Tools: Monitoring, Storage Management, and costing tools - http://communities.quest.com/community/cloud-tools  Paraleap: Monitoring tool - http://www.paraleap.com/AzureWatch  Cloudgraphs: Monitoring too -  http://www.cloudgraphs.com/  Opstera: Monitoring for Windows Azure and a Scale-out pattern manager - http://www.opstera.com/products/Azureops/  Compuware: SaaS performance monitoring, load testing -  http://www.compuware.com/application-performance-management/gomez-apm-products.html  SOASTA: Penetration and Security Testing - http://www.soasta.com/cloudtest/enterprise/  LoadStorm: Load-testing tool - http://loadstorm.com/windows-azure  Open-Source Tools This is probably the most specific set of tools, and the list I’ll have to maintain most often. Smaller projects have a way of coming and going, so I’ll try and make sure this list is current. Windows Azure MMC: (I actually use this one a lot) http://wapmmc.codeplex.com/  Windows Azure Diagnostics Monitor: http://archive.msdn.microsoft.com/wazdmon  Azure Application Monitor: http://azuremonitor.codeplex.com/  Azure Web Log: http://www.xentrik.net/software/azure_web_log.html  Cloud Ninja:Multi-Tennant billing and performance monitor -  http://cnmb.codeplex.com/  Cloud Samurai: Multi-Tennant Management- http://cloudsamurai.codeplex.com/    If you have additions to this list, please post them as a comment and I’ll research and then add them. Thanks!

    Read the article

  • ICC Cricket World Cup 2011- Free Online Live Streaming, Mobile Apps, TV and Radio Guide

    - by Kavitha
    The ICC Cricket World Cup 2011 will be hosted jointly by Bangladesh, India and Sri Lanka. This 10th edition of World Cup is held between 19 February-2 April 2011. The World Cup drive will be starting in Dhaka on 19 February with the inaugural match between India and Bangladesh. The 43 days long ICC World Cup Cricket 2011 event will host 49 matches, day matches starting as early as 9.30am IST and day-night matches starting at 2.30pm IST. Here is our guide to follow 2011 ICC Cricket World Cup live on your computers, televisions,mobiles and radios Free Live Streaming On The Web (Official & Unofficial) http://espnstar.com will live stream all the matches of World Cup 2011 and they will be available in HD quality as they are the official broadcasters of World Cup 2011 cricket event. This is the first time ever a world cup cricket event is streamed online officially. If you are not able to access the official live streaming of Cricket World Cup due to regional restrictions, point your browser to any of the following unofficial live streams on the web. NOTE: MAKE SURE THAT YOUR ANTIVIRUS and ANTIMALWARE software are up and running before opening any of these sites. crictime.com - this site offers 6 live streaming servers that offer World Cup 2011 Cricket matches streams. Don’t mind the ads that are displayed left,right and center and just enjoy the cricket. Web pages dedicated for the world cup streaming are already live and you can bookmark them for your reference. cricfire.com/live-cricket: cricfire   gathers cricket live streams available around the web and provides them for easy access. Also they provide links for watching highlights and other post match analysis shows. Other sites that provide live streaming videos extracover.net webcric.com Searching for Unofficial Streams On Live Video Streaming Sites One of the best ways to find the unofficial streams is look for live streaming feeds on popular video streaming websites. We can be assured that these sites does not spread malware and spammy ads as they are well established. Here are the queries that you can use to search the popular sites FreedoCast  http://freedocast.com/search.aspx?go=cricket%20world%20cup Justin.tv      http://www.justin.tv/search?q=cricket+world+cup Ustream.tv  http://www.ustream.tv/discovery/live/all?q=cricket%20world%20cup TV Channels That Telecast Cricket World Cup Live Even though web is the place where we spend most of our time for entertainment, TVs are still popular for watching sports events. Mostly 90% of us are going to follow this cricket world cup matches on television sets. Here is the list of TV channels that paid whooping amounts of money for broadcasting rights and going to telecast live cricket Afghanistan – Ariana Television Network: Lemar TV Australia – Nine Network, Fox Sports Bangladesh – Bangladesh Television Canada – Asian Television Network China – ESPN Star Sports Europe (Except UK & Ireland) – Eurosport2 Fiji – Fiji TV India – ESPN Star Sports, Star Cricket, DD National (mostly India matches alone) Ireland – Zee Cafe Jamaica – Television Jamaica Middle East – Arab Radio and Television Network Nepal – ESPN Star Sports New Zealand – Sky Sport Pacific Islands – Sky Pacific Pakistan – GEO Super, Pakistan Television Corporation Pan-Africa – South African Broadcasting Corporation Singapore – Star Cricket South Africa – Supersport, Sabc3 Sport Sri Lanka – Sri Lanka Rupavahini Corporation United Kingdom – Sky Sports HD USA – Willow Cricket, DirecTV, Dish Network West Indies – Caribbean Media Corporation Radio Stations That Provide Live Commentary Don’t we listen to radio? Yes we still listen to radios, especially when we are on the go. Radios are part of our mobiles as well as music players like iPods. Here are the stations that you can tune into for catching live cricket commentary Australia – ABC Local Radio Bangladesh – Bangladesh Betar Canada , Central America – EchoStar India – All India Radio Pakistan, United Arab Emirates – Hum FM Sri Lanka – FM Derana United Kingdom, Ireland – BBC Radio West Indies – Caribbean Media Corporation Watch World Cup Cricket On Your Mobile This section is for Indian users. 3G rollout is happening at very high pace in all part of the India and most of the metros and towns are able to access 3G services. With 3G on your mobile you will be able to watch live ICC world cricket on your Reliance Mobiles and you can read more about it here. Top 10 Cricket Websites Check out our earlier post on top 10 cricket web sites for information. This article titled,ICC Cricket World Cup 2011- Free Online Live Streaming, Mobile Apps, TV and Radio Guide, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • Edit Media Center TV Recordings with Windows Live Movie Maker

    - by DigitalGeekery
    Have you ever wanted to take a TV program you’ve recorded in Media Center and remove the commercials or save clips of favorite scenes? Today we’ll take a look at editing WTV and DVR-MS files with Windows Live Movie Maker. Download and Install Windows Live Movie Maker. The download link can be found at the end of the article. WLMM is part of Windows Live Essentials, but you can choose to install only the applications you want. You’ll also want to be sure to uncheck any unwanted settings like settings Bing as default search provider or MSN as your browser home page.   Add your recorded TV file to WLMM by clicking the Add videos and photos button, or by dragging and dropping it onto the storyboard.   You’ll see your video displayed in the Preview window on the left and on the storyboard. Adjust the Zoom Time Scale slider at the lower right to change the level of detail displayed on the storyboard. You may want to start zoomed out and zoom in for more detailed edits.   Removing Commercials or Unwanted Sections Note: Changes and edits made in Windows Live Movie Maker do not change or effect the original video file. To accomplish this, we will makes cuts, or “splits,” and the beginning and end of the section we want to remove, and then we will delete that section from our project. Click and drag the slider bar along the the storyboard to scroll through the video. When you get to the end of a row in on the storyboard, drag the slider down to the beginning of the next row. We’ve found it easiest and most accurate to get close to the end of the commercial break and then use the Play button and the Previous Frame and Next Frame buttons underneath the Preview window to fine tune your cut point. When you find the right place to make your first cut, click the split button on the Edit tab on the ribbon. You will see your video “split” into two sections. Now, repeat the process of scrolling through the storyboard to find the end of the section you wish to cut. When you are at the proper point, click the Split button again.   Now we’ll delete that section by selecting it and pressing the Delete key, selecting remove on the Home tab, or by right clicking on the section and selecting Remove.   Trim Tool This tool allows you to select a portion of the video to keep while trimming away the rest.   Click and drag the sliders in the preview windows to select the area you want to keep. The area outside the sliders will be trimmed away. The area inside is the section that is kept in the movie. You can also adjust the Start and End points manually on the ribbon.   Delete any additional clips you don’t want in the final output. You can also accomplish this by using the Set start point and Set end point buttons. Clicking Set start point will eliminate everything before the start point. Set end point will eliminate everything after the end point. And you’re left with only the clip you want to keep.   Output your Video Select the icon at the top left, then select Save movie. All of these settings will output your movie as a WMV file, but file size and quality will vary by setting. The Burn to DVD option also outputs a WMV file, but then opens Windows DVD Maker and prompts you to create and burn a DVD.   Conclusion WLMM is one of the few applications that can edit WTV files, and it’s the only one we’re aware of that’s free. We should note only WTV and DVR-MS files will appear in the Recorded TV library in Media Center, so if you want to view your WMV output file in WMC you’ll need to add it to the Video or Movie library. Would you like to learn more about Windows Live Movie Maker? Check out are article on how to turn photos and home videos into movies with Windows Live Movie Maker. Need to add videos from a network location? WLMM doesn’t allow this by default, but you check out how to add network support to Windows Live Move Maker. Download Windows Live Similar Articles Productive Geek Tips Rotate a Video 90 degrees with VLC or Windows Live Movie MakerHow to Make/Edit a movie with Windows Movie Maker in Windows VistaFamily Fun: Share Photos with Photo Gallery and Windows Live SpacesAutomatically Mount and View ISO files in Windows 7 Media CenterAutomatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor

    Read the article

  • Management and Monitoring Tools for Windows Azure

    - by BuckWoody
    With such a large platform, Windows Azure has a lot of moving parts. We’ve done our best to keep the interface as simple as possible, while giving you the most control and visibility we can. However, as with most Microsoft products, there are multiple ways to do something – and I’ve always found that to be a good strength. Depending on the situation, I might want a graphical interface, a command-line interface, or just an API so I can incorporate the management into my own tools, or have third-party companies write other tools. While by no means exhaustive, I thought I might put together a quick list of a few tools you can use to manage and monitor Windows Azure components, from our IaaS, SaaS and PaaS offerings. Some of the products focus on one area more than another, but all are available today. I’ll try and maintain this list to keep it current, but make sure you check the date of this post’s update – if it’s more than six months old, it’s most likely out of date. Things move fast in the cloud. The Windows Azure Management Portal The primary tool for managing Windows Azure is our portal – most everything you need is there, from creating new services to querying a database. There are two versions as of this writing – a Silverlight client version, and a newer HTML5 version. The latter is being updated constantly to be in parity with the Silverlight client. There’s a balance in this portal between simplicity and power – we’re following the “less is more” approach, with increasing levels of detail as you work through the portal rather than overwhelming you with a single, long “more is more” page. You can find the Portal here: http://windowsazure.com (then click “Log In” and then “Portal”) Windows Azure Management API You can also use programming tools to either write your own interface, or simply provide management functions directly within your solution. You have two options – you can use the more universal REST API’s, which area bit more complex but work with any system that can write to them, or the more approachable .NET API calls in code. You can find the reference for the API’s here: http://msdn.microsoft.com/en-us/library/windowsazure/ee460799.aspx  All Class Libraries, for each part of Windows Azure: http://msdn.microsoft.com/en-us/library/ee393295.aspx  PowerShell Command-lets PowerShell is one of the most powerful scripting languages I’ve used with Windows – and it’s baked into all of our products. When you need to work with multiple servers, scripting is really the only way to go, and the Windows Azure PowerShell Command-Lets allow you to work across most any part of the platform – and can even be used within the services themselves. You can do everything with them from creating a new IaaS, PaaS or SaaS service, to controlling them and even working with security and more. You can find more about the Command-Lets here: http://wappowershell.codeplex.com/documentation (older link, still works, will point you to the new ones as well) We have command-line utilities for other operating systems as well: https://www.windowsazure.com/en-us/manage/downloads/  Video walkthrough of using the Command-Lets: http://channel9.msdn.com/Events/BUILD/BUILD2011/SAC-859T  System Center System Center is actually a suite of graphical tools you can use to manage, deploy, control, monitor and tune software from Microsoft and even other platforms. This will be the primary tool we’ll recommend for managing a hybrid or contiguous management process – and as time goes on you’ll see more and more features put into System Center for the entire Windows Azure suite of products. You can find the Management Pack and README for it here: http://www.microsoft.com/en-us/download/details.aspx?id=11324  SQL Server Management Studio / Data Tools / Visual Studio SQL Server has two built-in management and development, and since Version 2008 R2, you can use them to manage Windows Azure Databases. Visual Studio also lets you connect to and manage portions of Windows Azure as well as Windows Azure Databases. You can read more about Visual Studio here: http://msdn.microsoft.com/en-us/library/windowsazure/ee405484  You can read more about the SQL tools here: http://msdn.microsoft.com/en-us/library/windowsazure/ee621784.aspx  Vendor-Provided Tools Microsoft does not suggest or endorse a specific third-party product. We do, however, use them, and see lots of other customers use them. You can browse to these sites to learn more, and chat with their folks directly on how they support Windows Azure. Cerebrata: Tools for managing from the command-line, graphical diagnostics, graphical storage management - http://www.cerebrata.com/  Quest Cloud Tools: Monitoring, Storage Management, and costing tools - http://communities.quest.com/community/cloud-tools  Paraleap: Monitoring tool - http://www.paraleap.com/AzureWatch  Cloudgraphs: Monitoring too -  http://www.cloudgraphs.com/  Opstera: Monitoring for Windows Azure and a Scale-out pattern manager - http://www.opstera.com/products/Azureops/  Compuware: SaaS performance monitoring, load testing -  http://www.compuware.com/application-performance-management/gomez-apm-products.html  SOASTA: Penetration and Security Testing - http://www.soasta.com/cloudtest/enterprise/  LoadStorm: Load-testing tool - http://loadstorm.com/windows-azure  Open-Source Tools This is probably the most specific set of tools, and the list I’ll have to maintain most often. Smaller projects have a way of coming and going, so I’ll try and make sure this list is current. Windows Azure MMC: (I actually use this one a lot) http://wapmmc.codeplex.com/  Windows Azure Diagnostics Monitor: http://archive.msdn.microsoft.com/wazdmon  Azure Application Monitor: http://azuremonitor.codeplex.com/  Azure Web Log: http://www.xentrik.net/software/azure_web_log.html  Cloud Ninja:Multi-Tennant billing and performance monitor -  http://cnmb.codeplex.com/  Cloud Samurai: Multi-Tennant Management- http://cloudsamurai.codeplex.com/    If you have additions to this list, please post them as a comment and I’ll research and then add them. Thanks!

    Read the article

  • SQL Authority News – Play by Play with Pinal Dave – A Birthday Gift

    - by Pinal Dave
    Today is my birthday. Personal Note When I was young, I was always looking forward to my birthday as on this day, I used to get gifts from everybody. Now when I am getting old on each of my birthday, I have almost same feeling but the direction is different. Now on each of my birthday, I feel like giving gifts to everybody. I have received lots of support, love and respect from everybody; and now I must return it back.Well, on this birthday, I have very unique gifts for everybody – my latest course on SQL Server. How I Tune Performance I often get questions where I am asked how do I work on a normal day. I am often asked that how do I work when I have performance tuning project is assigned to me. Lots of people have expressed their desire that they want me to explain and demonstrate my own method of solving performance problem when I am facing real world problem. It is a pretty difficult task as in the real world, nothing goes as planned and usually planned demonstrations have no place there. The real world, demands real solutions and in a timely fashion. If a consultant goes to industry and does not demonstrate his/her capabilities in very first few minutes, it does not matter how much fame he/she is, the door is shown to them eventually. It is true and in my early career, I have faced it quite commonly. I have learned the trick to be honest from the start and request absolutely transparent communication from the organization where I am to consult. Play by Play Play by Play is a very unique setup. It is not planned and it is a step by step course. It is like a reality show – a very real encounter to the problem and real problem solving approach. I had a great time doing this course. Geoffrey Grosenbach (VP of Pluralsight) sits down with me to see what a SQL Server Admin does in the real world. This Play-by-Play focuses on SQL Server performance tuning and I go over optimizing queries and fine-tuning the server. The table of content of this course is very simple. Introduction In the introduction I explained my basic strategies when I am approached by a customer for performance tuning. Basic Information Gathering In this module I explain how I do gather various information for performance tuning project. It is very crucial to demonstrate to customers for consultant his capability of solving problem. I attempt to resolve a small problem which gives a big positive impact on performance, consultant have to gather proper information from the start. I demonstrate in this module, how one can collect all the important performance tuning metrics. Removing Performance Bottleneck In this module, I build upon the previous module’s statistics collected. I analysis various performance tuning measures and immediately start implementing various tweaks on the performance, which will start improving the performance of my server. This is a very effective method and it gives immediate return of efforts. Index Optimization Indexes are considered as a silver bullet for performance tuning. However, it is not true always there are plenty of examples where indexes even performs worst after implemented. The key is to understand a few of the basic properties of the index and implement the right things at the right time. In this module, I describe in detail how to do index optimizations and what are right and wrong with Index. If you are a DBA or developer, and if your application is running slow – this is must attend module for you. I have some really interesting stories to tell as well. Optimize Query with Rewrite Every problem has more than one solution, in this module we will see another very famous, but hard to master skills for performance tuning – Query Rewrite. There are few do’s and don’ts for any query rewrites. I take a very simple example and demonstrate how query rewrite can improve the performance of the query at many folds. I also share some real world funny stories in this module. This course is hosted at Pluralsight. You will need a valid login for Pluralsight to watch  Play by Play: Pinal Dave course. You can also sign up for FREE Trial of Pluralsight to watch this course. As today is my birthday – I will give 10 people (randomly) who will express their desire to learn this course, a free code. Please leave your comment and I will send you free code to watch this course for free. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, SQLAuthority News, T SQL, Video

    Read the article

  • Monitoring ASP.NET Application

    - by imran_ku07
        Introduction:          There are times when you may need to monitor your ASP.NET application's CPU and memory consumption, so that you can fine-tune your ASP.NET application(whether Web Form, MVC or WebMatrix). Also, sometimes you may need to see all the exceptions(and their details) of your application raising, whether they are handled or not. If you are creating an ASP.NET application in .NET Framework 4.0, then you can easily monitor your application's CPU or memory consumption and see how many exceptions your application raising. In this article I will show you how you can do this.       Description:           With .NET Framework 4.0, you can turn on the monitoring of CPU and memory consumption by setting AppDomain.MonitoringEnabled property to true. Also, in .NET Framework 4.0, you can register a callback method to AppDomain.FirstChanceException event to monitor the exceptions being thrown within your application's AppDomain. Turning on the monitoring and registering a callback method will add some additional overhead to your application, which will hurt your application performance. So it is better to turn on these features only if you have following properties in web.config file,   <add key="AppDomainMonitoringEnabled" value="true"/> <add key="FirstChanceExceptionMonitoringEnabled" value="true"/>             In case if you wonder what does FirstChanceException mean. It simply means the first notification of an exception raised by your application. Even CLR invokes this notification before the catch block that handles the exception. Now just update global.asax.cs file as,   string _item = "__RequestExceptionKey"; protected void Application_Start() { SetupMonitoring(); } private void SetupMonitoring() { bool appDomainMonitoringEnabled, firstChanceExceptionMonitoringEnabled; bool.TryParse(ConfigurationManager.AppSettings["AppDomainMonitoringEnabled"], out appDomainMonitoringEnabled); bool.TryParse(ConfigurationManager.AppSettings["FirstChanceExceptionMonitoringEnabled"], out firstChanceExceptionMonitoringEnabled); if (appDomainMonitoringEnabled) { AppDomain.MonitoringIsEnabled = true; } if (firstChanceExceptionMonitoringEnabled) { AppDomain.CurrentDomain.FirstChanceException += (object source, FirstChanceExceptionEventArgs e) => { if (HttpContext.Current == null)// If no context available, ignore it return; if (HttpContext.Current.Items[_item] == null) HttpContext.Current.Items[_item] = new RequestException { Exceptions = new List<Exception>() }; (HttpContext.Current.Items[_item] as RequestException).Exceptions.Add(e.Exception); }; } } protected void Application_EndRequest() { if (Context.Items[_item] != null) { //Only add the request if atleast one exception is raised var reqExc = Context.Items[_item] as RequestException; reqExc.Url = Request.Url.AbsoluteUri; Application.Lock(); if (Application["AllExc"] == null) Application["AllExc"] = new List<RequestException>(); (Application["AllExc"] as List<RequestException>).Add(reqExc); Application.UnLock(); } }               Now browse to Monitoring.cshtml file, you will see the following screen,                            The above screen shows you the total bytes allocated, total bytes in use and CPU usage of your application. The above screen also shows you all the exceptions raised by your application which is very helpful for you. I have uploaded a sample project on github at here. You can find Monitoring.cshtml file on this sample project. You can use this approach in ASP.NET MVC, ASP.NET WebForm and WebMatrix application.       Summary:          This is very important for administrators/developers to manage and administer their web application after deploying to production server. This article will help administrators/developers to see the memory and CPU usage of their web application. This will also help administrators/developers to see all the exceptions your application is throwing whether they are swallowed or not. Hopefully you will enjoy this article too.   SyntaxHighlighter.all()

    Read the article

  • FY12 Partner Kickoff – Are you Ready?

    - by user715249
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Want to know what Oracle has up its sleeve for FY12? Join us on June 28th (or 29th depending on your region) as we kick off the new year and fill you in on our latest plans. This live, interactive session will be hosted by Judson Althoff and he’s bringing some top Oracle executives into the studio with him. Take a peek below as Lydia Smyers, Oracle WW A&C vice president, talks about this upcoming event. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} As if that weren’t enough, Oracle President Mark Hurd will update you on his focus for partners in FY12 and OPN will be making a special announcement for our ISV partners highlighting some exciting new offerings on how we will go to market together.  But wait, there’s more – you’ll also hear from Oracle product executives and regional sales leaders outlining their priorities for the upcoming year.  Phew – We’re tired just thinking about all of the great content that will be shared on June 28th/29th.  There are a lot of exciting announcements in store for you later this month so tune in for the latest updates! Register now to get your name on ‘the list’, The OPN Communications Team

    Read the article

  • FairScheduling Conventions in Hadoop

    - by dan.mcclary
    While scheduling and resource allocation control has been present in Hadoop since 0.20, a lot of people haven't discovered or utilized it in their initial investigations of the Hadoop ecosystem. We could chalk this up to many things: Organizations are still determining what their dataflow and analysis workloads will comprise Small deployments under tests aren't likely to show the signs of strains that would send someone looking for resource allocation options The default scheduling options -- the FairScheduler and the CapacityScheduler -- are not placed in the most prominent position within the Hadoop documentation. However, for production deployments, it's wise to start with at least the foundations of scheduling in place so that you can tune the cluster as workloads emerge. To do that, we have to ask ourselves something about what the off-the-rack scheduling options are. We have some choices: The FairScheduler, which will work to ensure resource allocations are enforced on a per-job basis. The CapacityScheduler, which will ensure resource allocations are enforced on a per-queue basis. Writing your own implementation of the abstract class org.apache.hadoop.mapred.job.TaskScheduler is an option, but usually overkill. If you're going to have several concurrent users and leverage the more interactive aspects of the Hadoop environment (e.g. Pig and Hive scripting), the FairScheduler is definitely the way to go. In particular, we can do user-specific pools so that default users get their fair share, and specific users are given the resources their workloads require. To enable fair scheduling, we're going to need to do a couple of things. First, we need to tell the JobTracker that we want to use scheduling and where we're going to be defining our allocations. We do this by adding the following to the mapred-site.xml file in HADOOP_HOME/conf: <property> <name>mapred.jobtracker.taskScheduler</name> <value>org.apache.hadoop.mapred.FairScheduler</value> </property> <property> <name>mapred.fairscheduler.allocation.file</name> <value>/path/to/allocations.xml</value> </property> <property> <name>mapred.fairscheduler.poolnameproperty</name> <value>pool.name</value> </property> <property> <name>pool.name</name> <value>${user.name}</name> </property> What we've done here is simply tell the JobTracker that we'd like to task scheduling to use the FairScheduler class rather than a single FIFO queue. Moreover, we're going to be defining our resource pools and allocations in a file called allocations.xml For reference, the allocation file is read every 15s or so, which allows for tuning allocations without having to take down the JobTracker. Our allocation file is now going to look a little like this <?xml version="1.0"?> <allocations> <pool name="dan"> <minMaps>5</minMaps> <minReduces>5</minReduces> <maxMaps>25</maxMaps> <maxReduces>25</maxReduces> <minSharePreemptionTimeout>300</minSharePreemptionTimeout> </pool> <mapreduce.job.user.name="dan"> <maxRunningJobs>6</maxRunningJobs> </user> <userMaxJobsDefault>3</userMaxJobsDefault> <fairSharePreemptionTimeout>600</fairSharePreemptionTimeout> </allocations> In this case, I've explicitly set my username to have upper and lower bounds on the maps and reduces, and allotted myself double the number of running jobs. Now, if I run hive or pig jobs from either the console or via the Hue web interface, I'll be treated "fairly" by the JobTracker. There's a lot more tweaking that can be done to the allocations file, so it's best to dig down into the description and start trying out allocations that might fit your workload.

    Read the article

  • SQLAuthority News – #TechEdIn – TechEd India 2012 Memories and Photos

    - by pinaldave
    TechEd India 2012 was held in Bangalore last March 21 to 23, 2012. Just like every year, this event is bigger, grander and inspiring. Pinal Dave at TechEd India 2012 Family Event Every single year, TechEd is a special affair for my entire family.  Four months before the start of TechEd, I usually start to build the mental image of the event. I start to think  about various things. For the most part, what excites me most is presenting a session and meeting friends. Seriously, I start thinking about presenting my session 4 months earlier than the event!  I work on my presentation day and night. I want to make sure that what I present is accurate and that I have experienced it firsthand. My wife and my daughter also contribute to my efforts. For us, TechEd is a family event, and the two of them feel equally responsible as well. They give up their family time so I can bring out the best content for the Community. Pinal, Shaivi and Nupur at TechEd India 2012 Guinea Pigs (My Experiment Victims) I do not rehearse my session, ever. However, I test my demo almost every single day till the last moment that I have to present it already. I sometimes go over the demo more than 2-3 times a day even though the event is more than a month away. I have two “guinea pigs”: 1) Nupur Dave and 2) Vinod Kumar. When I am at home, I present my demos to my wife Nupur. At times I feel that people often backup their demo, but in my case, I have backup demo presenters. In the office during lunch time, I present the demos to Vinod. I am sure he can walk my demos easily with eyes closed. Pinal and Vinod at TechEd India 2012 My Sessions I’ve been determined to present my sessions in a real and practical manner. I prefer to present the subject that I myself would be eager to attend to and sit through if I were an audience. Just keeping that principle in mind, I have created two sessions this year. SQL Server Misconception and Resolution Pinal and Vinod at TechEd India 2012 We believe all kinds of stuff – that the earth is flat, or that the forbidden fruit is apple, or that the big bang theory explains the origin of the universe, and so many other things. Just like these, we have plenty of misconceptions in SQL Server as well. I have had this dream of co-presenting a session with Vinod Kumar for the past 3 years. I have been asking him every year if we could present a session together, but we never got it to work out, until this year came. Fortunately, we got a chance to stand on the same stage and present a single subject.  I believe that Vinod Kumar and I have an excellent synergy when we are working together. We know each other’s strengths and weakness. We know when the other person will speak and when he will keep quiet. The reason behind this synergy is that we have worked on 2 Video Learning Courses (SQL Server Indexes and SQL Server Questions and Answers) and authored 1 book (SQL Server Questions and Answers) together. Crowd Outside Session Hall This session was inspired from the “Laurel and Hardy” show so we performed a role-playing of those famous characters. We had an excellent time at the stage and, for sure, the audience had a wonderful time, too. We had an extremely large audience for this session and had a great time interacting with them. Speed Up! – Parallel Processes and Unparalleled Performance Pinal Dave at TechEd India 2012 I wanted to approach this session at level 400 and I was very determined to do so. The biggest challenge I had was that this was a total of 60 minutes of session and the audience profile was very generic. I had to present at level 100 as well at 400. I worked hard to tune up these demos. I wanted to make sure that my messages would land perfectly to the minds of the attendees, and when they walk out of the session, they could use the knowledge I shared on their servers. After the session, I felt an extreme satisfaction as I received lots of positive feedback at the event. At one point, so many people rushed towards me that I was a bit scared that the stage might break and someone would get injured. Fortunately, nothing like that happened and I was able to shake hands with everybody. Pinal Dave at TechEd India 2012 Crowd rushing to Pinal at TechEd India 2012 Networking This is one of the primary reasons many of us visit the annual TechEd event. I had a fantastic time meeting SQL Server enthusiasts. Well, it was a terrific time meeting old friends, user group members, MVPs and SQL Enthusiasts. I have taken many photographs with lots of people, but I have received a very few back. If you are reading this blog and have a photo of us at the event, would you please send it to me so I could keep it in my memory lane? SQL Track Speaker: Jacob and Pinal at TechEd India 2012 SQL Community: Pinal, Tejas, Nakul, Jacob, Balmukund, Manas, Sudeepta, Sahal at TechEd India 2012 Star Speakers: Amit and Balmukund at TechEd India 2012 TechED Rockstars: Nakul, Tejas and Pinal at TechEd India 2012 I guess TechEd is a mix of family affair and culture for me! Hamara TechEd (Our TechEd) Please tell me which photo you like the most! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, SQLServer, T SQL, Technology Tagged: TechEd, TechEdIn

    Read the article

  • MySQL Connect Only 10 Days Away - Focus on InnoDB Sessions

    - by Bertrand Matthelié
    Time flies and MySQL Connect is only 10 days away! You can check out the full program here as well as in the September edition of the MySQL newsletter. Mat recently blogged about the MySQL Cluster sessions you’ll have the opportunity to attend, and below are those focused on InnoDB. Remember you can plan your schedule with Schedule Builder. Saturday, 1.00 pm, Room Golden Gate 3: 10 Things You Should Know About InnoDB—Calvin Sun, Oracle InnoDB is the default storage engine for Oracle’s MySQL as of MySQL Release 5.5. It provides the standard ACID-compliant transactions, row-level locking, multiversion concurrency control, and referential integrity. InnoDB also implements several innovative technologies to improve its performance and reliability. This presentation gives a brief history of InnoDB; its main features; and some recent enhancements for better performance, scalability, and availability. Saturday, 5.30 pm, Room Golden Gate 4: Demystified MySQL/InnoDB Performance Tuning—Dimitri Kravtchuk, Oracle This session covers performance tuning with MySQL and the InnoDB storage engine for MySQL and explains the main improvements made in MySQL Release 5.5 and Release 5.6. Which setting for which workload? Which value will be better for my system? How can I avoid potential bottlenecks from the beginning? Do I need a purge thread? Is it true that InnoDB doesn't need thread concurrency anymore? These and many other questions are asked by DBAs and developers. Things are changing quickly and constantly, and there is no “silver bullet.” But understanding the configuration setting’s impact is already a huge step in performance improvement. Bring your ideas and problems to share them with others—the discussion is open, just moderated by a speaker. Sunday, 10.15 am, Room Golden Gate 4: Better Availability with InnoDB Online Operations—Calvin Sun, Oracle Many top Web properties rely on Oracle’s MySQL as a critical piece of infrastructure for serving millions of users. Database availability has become increasingly important. One way to enhance availability is to give users full access to the database during data definition language (DDL) operations. The online DDL operations in recent MySQL releases offer users the flexibility to perform schema changes while having full access to the database—that is, with minimal delay of operations on a table and without rebuilding the entire table. These enhancements provide better responsiveness and availability in busy production environments. This session covers these improvements in the InnoDB storage engine for MySQL for online DDL operations such as add index, drop foreign key, and rename column. Sunday, 11.45 am, Room Golden Gate 7: Developing High-Throughput Services with NoSQL APIs to InnoDB and MySQL Cluster—Andrew Morgan and John Duncan, Oracle Ever-increasing performance demands of Web-based services have generated significant interest in providing NoSQL access methods to MySQL (MySQL Cluster and the InnoDB storage engine of MySQL), enabling users to maintain all the advantages of their existing relational databases while providing blazing-fast performance for simple queries. Get the best of both worlds: persistence; consistency; rich SQL queries; high availability; scalability; and simple, flexible APIs and schemas for agile development. This session describes the memcached connectors and examines some use cases for how MySQL and memcached fit together in application architectures. It does the same for the newest MySQL Cluster native connector, an easy-to-use, fully asynchronous connector for Node.js. Sunday, 1.15 pm, Room Golden Gate 4: InnoDB Performance Tuning—Inaam Rana, Oracle The InnoDB storage engine has always been highly efficient and includes many unique architectural elements to ensure high performance and scalability. In MySQL 5.5 and MySQL 5.6, InnoDB includes many new features that take better advantage of recent advances in operating systems and hardware platforms than previous releases did. This session describes unique InnoDB architectural elements for performance, new features, and how to tune InnoDB to achieve better performance. Sunday, 4.15 pm, Room Golden Gate 3: InnoDB Compression for OLTP—Nizameddin Ordulu, Facebook and Inaam Rana, Oracle Data compression is an important capability of the InnoDB storage engine for Oracle’s MySQL. Compressed tables reduce the size of the database on disk, resulting in fewer reads and writes and better throughput by reducing the I/O workload. Facebook pushes the limit of InnoDB compression and has made several enhancements to InnoDB, making this technology ready for online transaction processing (OLTP). In this session, you will learn the fundamentals of InnoDB compression. You will also learn the enhancements the Facebook team has made to improve InnoDB compression, such as reducing compression failures, not logging compressed page images, and allowing changes of compression level. Not registered yet? You can still save US$ 300 over the on-site fee – Register Now!

    Read the article

  • ORACLE RIGHTNOW DYNAMIC AGENT DESKTOP CLOUD SERVICE - Putting the Dynamite into Dynamic Agent Desktop

    - by Andreea Vaduva
    Untitled Document There’s a mountain of evidence to prove that a great contact centre experience results in happy, profitable and loyal customers. The very best Contact Centres are those with high first contact resolution, customer satisfaction and agent productivity. But how many companies really believe they are the best? And how many believe that they can be? We know that with the right tools, companies can aspire to greatness – and achieve it. Core to this is ensuring their agents have the best tools that give them the right information at the right time, so they can focus on the customer and provide a personalised, professional and efficient service. Today there are multiple channels through which customers can communicate with you; phone, web, chat, social to name a few but regardless of how they communicate, customers expect a seamless, quality experience. Most contact centre agents need to switch between lots of different systems to locate the right information. This hampers their productivity, frustrates both the agent and the customer and increases call handling times. With this in mind, Oracle RightNow has designed and refined a suite of add-ins to optimize the Agent Desktop. Each is designed to simplify and adapt the agent experience for any given situation and unify the customer experience across your media channels. Let’s take a brief look at some of the most useful tools available and see how they make a difference. Contextual Workspaces: The screen where agents do their job. Agents don’t want to be slowed down by busy screens, scrolling through endless tabs or links to find what they’re looking for. They want quick, accurate and easy. Contextual Workspaces are fully configurable and through workspace rules apply if, then, else logic to display only the information the agent needs for the issue at hand . Assigned at the Profile level, different levels of agent, from a novice to the most experienced, get a screen that is relevant to their role and responsibilities and ensures their job is done quickly and efficiently the first time round. Agent Scripting: Sometimes, agents need to deliver difficult or sensitive messages while maximising the opportunity to cross-sell and up-sell. After all, contact centres are now increasingly viewed as revenue generators. Containing sophisticated branching logic, scripting helps agents to capture the right level of information and guides the agent step by step, ensuring no mistakes, inconsistencies or missed opportunities. Guided Assistance: This is typically used to solve common troubleshooting issues, displaying a series of question and answer sets in a decision-tree structure. This means agents avoid having to bookmark favourites or rely on written notes. Agents find particular value in these guides - to quickly craft chat and email responses. What’s more, by publishing guides in answers on support pages customers, can resolve issues themselves, without needing to contact your agents. And b ecause it can also accelerate agent ramp-up time, it ensures that even novice agents can solve customer problems like an expert. Desktop Workflow: Take a step back and look at the full customer interaction of your agents. It probably spans multiple systems and multiple tasks. With Desktop Workflows you control the design workflows that span the full customer interaction from start to finish. As sequences of decisions and actions, workflows are unique in that they can create or modify different records and provide automation behind the scenes. This means your agents can save time and provide better quality of service by having the tools they need and the relevant information as required. And doing this boosts satisfaction among your customers, your agents and you – so win, win, win! I have highlighted above some of the tools which can be used to optimise the desktop; however, this is by no means an exhaustive list. In approaching your design, it’s important to understand why and how your customers contact you in the first place. Once you have this list of “whys” and “hows”, you can design effective policies and procedures to handle each category of problem, and then implement the right agent desktop user interface to support them. This will avoid duplication and wasted effort. Five Top Tips to take away: Start by working out “why” and “how” customers are contacting you. Implement a clean and relevant agent desktop to support your agents. If your workspaces are getting complicated consider using Desktop Workflow to streamline the interaction. Enhance your Knowledgebase with Guides. Agents can access them proactively and can be published on your web pages for customers to help themselves. Script any complex, critical or sensitive interactions to ensure consistency and accuracy. Desktop optimization is an ongoing process so continue to monitor and incorporate feedback from your agents and your customers to keep your Contact Centre successful.   Want to learn more? Having attending the 3-day Oracle RightNow Customer Service Administration class your next step is to attend the Oracle RightNow Customer Portal Design and 2-day Dynamic Agent Desktop Administration class. Here you’ll learn not only how to leverage the Agent Desktop tools but also how to optimise your self-service pages to enhance your customers’ web experience.   Useful resources: Review the Best Practice Guide Review the tune-up guide   About the Author: Angela Chandler joined Oracle University as a Senior Instructor through the RightNow Customer Experience Acquisition. Her other areas of expertise include Business Intelligence and Knowledge Management.  She currently delivers the following Oracle RightNow courses in the classroom and as a Live Virtual Class: RightNow Customer Service Administration (3 days) RightNow Customer Portal Design and Dynamic Agent Desktop Administration (2 days) RightNow Analytics (2 days) Rightnow Chat Cloud Service Administration (2 days)

    Read the article

  • My Right-to-Left Foot (T-SQL Tuesday #13)

    - by smisner
    As a business intelligence consultant, I often encounter the situation described in this month's T-SQL Tuesday, hosted by Steve Jones ( Blog | Twitter) – “What the Business Says Is Not What the  Business Wants.” Steve posed the question, “What issues have you had in interacting with the business to get your job done?” My profession requires me to have one foot firmly planted in the technology world and the other foot planted in the business world. I learned long ago that the business never says exactly what the business wants because the business doesn't have the words to describe what the business wants accurately enough for IT. Not only do technological-savvy barriers exist, but there are also linguistic barriers between the two worlds. So how do I cope? The adage "a picture is worth a thousand words" is particularly helpful when I'm called in to help design a new business intelligence solution. Many of my students in BI classes have heard me explain ("rant") about left-to-right versus right-to-left design. To understand what I mean about these two design options, let's start with a picture: When we design a business intelligence solution that includes some sort of traditional data warehouse or data mart design, we typically place the data sources on the left, the new solution in the middle, and the users on the right. When I've been called in to help course-correct a failing BI project, I often find that IT has taken a left-to-right approach. They look at the data sources, decide how to model the BI solution as a _______ (fill in the blank with data warehouse, data mart, cube, etc.), and then build the new data structures and supporting infrastructure. (Sometimes, they actually do this without ever having talked to the business first.) Then, when they show what they've built to the business, the business says that is not what we want. Uh-oh. I prefer to take a right-to-left approach. Preferably at the beginning of a project. But even if the project starts left-to-right, I'll do my best to swing it around so that we’re back to a right-to-left approach. (When circumstances are beyond my control, I carry on, but it’s a painful project for everyone – not because of me, but because the approach just doesn’t get to what the business wants in the most effective way.) By using a right to left approach, I try to understand what it is the business is trying to accomplish. I do this by having them explain reports to me, and explaining the decision-making process that relates to these reports. Sometimes I have them explain to me their business processes, or better yet show me their business processes in action because I need pictures, too. I (unofficially) call this part of the project "getting inside the business's head." This is starting at the right side of the diagram above. My next step is to start moving leftward. I do this by preparing some type of prototype. Depending on the nature of the project, this might mean that I simply mock up some data in a relational database and build a prototype report in Reporting Services. If I'm lucky, I might be able to use real data in a relational database. I'll either use a subset of the data in the prototype report by creating a prototype database to hold the sample data, or select data directly from the source. It all depends on how much data there is, how complex the queries are, and how fast I need to get the prototype completed. If the solution will include Analysis Services, then I'll build a prototype cube. Analysis Services makes it incredibly easy to prototype. You can sit down with the business, show them the prototype, and have a meaningful conversation about what the BI solution should look like. I know I've done a good job on the prototype when I get knocked out of my chair so that the business user can explore the solution further independently. (That's really happened to me!) We can talk about dimensions, hierarchies, levels, members, measures, and so on with something tangible to look at and without using those terms. It's not helpful to use sample data like Adventure Works or to use BI terms that they don't really understand. But when I show them their data using the BI technology and talk to them in their language, then they truly have a picture worth a thousand words. From that, we can fine tune the prototype to move it closer to what they want. They have a better idea of what they're getting, and I have a better idea of what to build. So right to left design is not truly moving from the right to the left. But it starts from the right and moves towards the middle, and once I know what the middle needs to look like, I can then build from the left to meet in the middle. And that’s how I get past what the business says to what the business wants.

    Read the article

  • ORA-7445 Troubleshooting

    - by [email protected]
        QUICKLINK: Note 153788.1 ORA-600/ORA-7445 Lookup tool Note 1082674.1 : A Video To Demonstrate The Usage Of The ORA-600/ORA-7445 Lookup Tool [Video]   Have you observed an ORA-07445 error reported in your alert log? While the ORA-600 error is "captured" as a handled exception in the Oracle source code, the ORA-7445 is an unhandled exception error due to an OS exception which should result in the creation of a core file.  An ORA-7445 is a generic error, and can occur from anywhere in the Oracle code. The precise location of the error is identified by the core file and/or trace file it produces.  Looking for the best way to diagnose? Whenever an ORA-7445 error is raised a core file is generated.  There may be a trace file generated with the error as well.   Prior to 11g, the core files are located in the CORE_DUMP_DEST directory.   Starting with 11g, there is a new advanced fault diagnosability infrastructure to manage trace data.  Diagnostic files are written into a root directory for all diagnostic data called the ADR home.   Core files at 11g will go to the ADR HOME/cdump directory.   For more information on the Oracle 11g Diagnosability feature see Note 453125.1 11g Diagnosability Frequently Asked Questions Note 443529.1 11g Quick Steps to Package and Send Critical Error Diagnostic Information to Support[Video]   NOTE:  While the core file is captured in the Diagnosability infrastructure, the file may not be included with a diagnostic package.1.  Check the Alert LogThe alert log may indicate additional errors or other internal errors at the time of the problem.   In some cases, the ORA-7445 error will occur along with ORA-600, ORA-3113, ORA-4030 errors.  The ORA-7445 error can be side effects of the other problems and you should review the first error and associated core file or trace file and work down the list of errors.   Note 1020463.6 DIAGNOSING ORA-3113 ERRORS Note 1812.1 TECH:  Getting a Stack Trace from a CORE file Note 414966.1 RDA Documentation Index   If the ORA-7445 errors are not associated with other error conditions, ensure the trace data is not truncated. If you see a message at the end of the file   "MAX DUMP FILE SIZE EXCEEDED"   the MAX_DUMP_FILE_SIZE parameter is not setup high enough or to 'unlimited'. There could be vital diagnostic information missing in the file and discovering the root issue may be very difficult.  Set the MAX_DUMP_FILE_SIZE appropriately and regenerate the error for complete trace information. For pointers on deeper analysis of these errors see   Note 390293.1 Introduction to 600/7445 Internal Error Analysis Note 211909.1 Customer Introduction to ORA-7445 Errors 2.  Search 600/7445 Lookup Tool Visit My Oracle Support to access the ORA-00600 Lookup tool (Note 153788.1). The ORA-600/ORA-7445 Lookup tool may lead you to applicable content in My Oracle Support on the problem and can be used to investigate the problem with argument data from the error message or you can pull out key stack pointers from the associated trace file to match up against known bugs.3.  "Fine tune" searches in Knowledge Base As the ORA-7445 error indicates an unhandled exception in the Oracle source code, your search in the Oracle Knowledge Base will need to focus on the stack data from the core file or the trace file. Keep in mind that searches on generic argument data will bring back a large result set.  The more you can learn about the environment and code leading to the errors, the easier it will be to narrow the hit list to match your problem. Note 153788.1 ORA-600/ORA-7445 TroubleshooterNote 1082674.1 A Video To Demonstrate The Usage Of The ORA-600/ORA-7445 Lookup Tool [Video] NOTE:  If no trace file is captured, see Note 1812.1 TECH:  Getting a Stack Trace from a CORE file.  Core files are managed through 11g Diagnosability, but are not packaged with other diagnostic data automatically.  The core files can be quite large, but may be useful during analysis within Oracle Support.4.  If assistance is required from Oracle Should it become necessary to get assistance from Oracle Support on an ORA-7445 problem, please provide at a minimum, the Alert log  Associated tracefile(s) or incident package at 11g Patch level  information Core file(s)  Information about changes in configuration and/or application prior to  issues  If error is reproducible, a self-contained reproducible testcase: Note.232963.1 How to Build a Testcase for Oracle Data Server Support to Reproduce ORA-600 and ORA-7445 Errors RDA report or Oracle Configuration Manager information Oracle Configuration Manager Quick Start Guide Note 548815.1 My Oracle Support Configuration Management FAQ Note 414966.1 RDA Documentation Index ***For reference to the content in this blog, refer to Note.1092832.1 Master Note for Diagnosing ORA-600

    Read the article

  • SQL SERVER – What is Incremental Statistics? – Performance improvements in SQL Server 2014 – Part 1

    - by Pinal Dave
    This is the first part of the series Incremental Statistics. Here is the index of the complete series. What is Incremental Statistics? – Performance improvements in SQL Server 2014 – Part 1 Simple Example of Incremental Statistics – Performance improvements in SQL Server 2014 – Part 2 DMV to Identify Incremental Statistics – Performance improvements in SQL Server 2014 – Part 3 Statistics are considered one of the most important aspects of SQL Server Performance Tuning. You might have often heard the phrase, with related to performance tuning. “Update Statistics before you take any other steps to tune performance”. Honestly, I have said above statement many times and many times, I have personally updated statistics before I start to do any performance tuning exercise. You may agree or disagree to the point, but there is no denial that Statistics play an extremely vital role in the performance tuning. SQL Server 2014 has a new feature called Incremental Statistics. I have been playing with this feature for quite a while and I find that very interesting. After spending some time with this feature, I decided to write about this subject over here. New in SQL Server 2014 – Incremental Statistics Well, it seems like lots of people wants to start using SQL Server 2014′s new feature of Incremetnal Statistics. However, let us understand what actually this feature does and how it can help. I will try to simplify this feature first before I start working on the demo code. Code for all versions of SQL Server Here is the code which you can execute on all versions of SQL Server and it will update the statistics of your table. The keyword which you should pay attention is WITH FULLSCAN. It will scan the entire table and build brand new statistics for you which your SQL Server Performance Tuning engine can use for better estimation of your execution plan. UPDATE STATISTICS TableName(StatisticsName) WITH FULLSCAN Who should learn about this? Why? If you are using partitions in your database, you should consider about implementing this feature. Otherwise, this feature is pretty much not applicable to you. Well, if you are using single partition and your table data is in a single place, you still have to update your statistics the same way you have been doing. If you are using multiple partitions, this may be a very useful feature for you. In most cases, users have multiple partitions because they have lots of data in their table. Each partition will have data which belongs to itself. Now it is very common that each partition are populated separately in SQL Server. Real World Example For example, if your table contains data which is related to sales, you will have plenty of entries in your table. It will be a good idea to divide the partition into multiple filegroups for example, you can divide this table into 3 semesters or 4 quarters or even 12 months. Let us assume that we have divided our table into 12 different partitions. Now for the month of January, our first partition will be populated and for the month of February our second partition will be populated. Now assume, that you have plenty of the data in your first and second partition. Now the month of March has just started and your third partition has started to populate. Due to some reason, if you want to update your statistics, what will you do? In SQL Server 2012 and earlier version You will just use the code of WITH FULLSCAN and update the entire table. That means even though you have only data in third partition you will still update the entire table. This will be VERY resource intensive process as you will be updating the statistics of the partition 1 and 2 where data has not changed at all. In SQL Server 2014 You will just update the partition of Partition 3. There is a special syntax where you can now specify which partition you want to update now. The impact of this is that it is smartly merging the new data with old statistics and update the entire statistics without doing FULLSCAN of your entire table. This has a huge impact on performance. Remember that the new feature in SQL Server 2014 does not change anything besides the capability to update a single partition. However, there is one feature which is indeed attractive. Previously, when table data were changed 20% at that time, statistics update were triggered. However, now the same threshold is applicable to a single partition. That means if your partition faces 20% data, change it will also trigger partition level statistics update which, when merged to your final statistics will give you better performance. In summary If you are not using a partition, this feature is not applicable to you. If you are using a partition, this feature can be very helpful to you. Tomorrow: We will see working code of SQL Server 2014 Incremental Statistics. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL Tagged: SQL Statistics, Statistics

    Read the article

  • About Me

    - by Jeffrey West
    I’m new to blogging.  This is the second blog post that I have written, and before I go too much further I wanted the readers of my blog to know a bit more about me… Kid’s Stuff By trade, I am a programmer (or coder, developer, engineer, architect, etc).  I started programming when I was 12 years old.  When I was 7, we got our first ‘family’ computer – an Apple IIc.  It was great to play games on, and of course what else was a 7-year-old going to do with it.  I did have one problem with it, though.  When I put in my 5.25” floppy to play a game, sometimes, instead loading my game I would get a mysterious ‘]’ on the screen with a flashing cursor.  This, of course, was not my game.  Much like the standard ‘Microsoft fix’ is to reboot, back then you would take the floppy out, shake it, and restart the computer and pray for a different result. One day, I learned at school that I could topple my nemesis – the ‘]’ and flashing cursor – by typing ‘load’ and pressing enter.  Most of the time, this would load my game and then I would get to play.  Problem solved.  However, I began to wonder – what else can I make it do? When I was in 5th grade my dad got a bright idea to buy me a Tandy 1000HX.  He didn’t know what I was going to do with it, and neither did I.  Least of all, my mom wasn’t happy about buying a 5th grader a $1,000 computer.  Nonetheless, Over time, I learned how to write simple basic programs out of the back of my Math book: 10 x=5 20 y=6 30 PRINT x+y That was fun for all of about 5 minutes.  I needed more – more challenges, more things that I could make the computer do.  In order to quench this thirst my parents sent me to National Computer Camps in Connecticut.  It was one of the best experiences of my childhood, and I spent 3 weeks each summer after that learning BASIC, Pascal, Turbo C and some C++.  There weren’t many kids at the time who knew anything about computers, and lets just say my knowledge of and interest in computers didn’t score me many ‘cool’ points.  My experiences at NCC set me on the path that I find myself on now, and I am very thankful for the experience.  Real Life I have held various positions in the past at different levels within the IT layer cake.  I started out as a Software Developer for a startup in the Dallas, TX area building software for semiconductor testing statistical process control and sampling.  I was the second Java developer that was hired, and the ninth employee overall, so I got a great deal of experience developing software.  Since there weren’t that many people in the organization, I also got a lot of field experience which meant that if I screwed up the code, I got yelled at (figuratively) by both my boss AND the customer.  Fun Times!  What made it better was that I got to help run pilot programs in Taiwan, Singapore, Malaysia and Malta.  Getting yelled at in Taiwan is slightly less annoying that getting yelled at in Dallas… I spent the next 5 years at Accenture doing systems integration in the ‘SOA’ group.  I joined as a Consultant and left as a Senior Manager.  I started out writing code in WebLogic Integration and left after I wrapped up project where I led a team of 25 to develop the next generation of a digital media platform to deliver HD content in a digital format.  At Accenture, I had the pleasure of working with some truly amazing people – mentoring some and learning from many others – and on some incredible real-world IT projects.  Given my background with the BEA stack of products I was often called in to troubleshoot and tune WebLogic, ALBPM and ALSB installations and have logged many hours digging through thread dumps, running performance tests with SoapUI and decompiling Java classes we didn’t have the source for so I could see what was going on in the code. I am now a Senior Principal Product Manager at Oracle in the Application Grid practice.  The term ‘Application Grid’ refers to a collection of software and hardware products within Oracle that enables customers to build horizontally scalable systems.  This collection of products includes WebLogic, GlassFish, Coherence, Tuxedo and the JRockit/HotSpot JVMs (HotSprocket, maybe?).  Now, with the introduction of Exalogic it has grown to include hardware as well. Wrapping it up… I love technology and have a diverse background ranging from software development to HW and network architecture & tuning.  I have held certifications for being an Oracle Certified DBA, MSCE and Cisco Certified Network Professional (CCNP), among others and I have put those to great use over my career.  I am excited about programming & technology and I enjoy helping people learn and be successful.  If you are having challenges with WebLogic, BPM or Service Bus feel free to reach out to me and I’ll be happy to help as I have time. Thanks for stopping by!   --Jeff

    Read the article

  • SQLAuthority News – Great Time Spent at Great Indian Developers Summit 2014

    - by Pinal Dave
    The Great Indian Developer Conference (GIDS) is one of the most popular annual event held in Bangalore. This year GIDS is scheduled on April 22, 25. I will be presented total four sessions at this event and each session is very different from each other. Here are the details of four of my sessions, which I presented there. Pluralsight Shades This event was a great event and I had fantastic fun presenting a technology over here. I was indeed very excited that along with me, I had many of my friends presenting at the event as well. I want to thank all of you to attend my session and having standing room every single time. I have already sent resources in my newsletter. You can sign up for the newsletter over here. Indexing is an Art I was amazed with the crowd present in the sessions at GIDS. There was a great interest in the subject of SQL Server and Performance Tuning. Audience at GIDS I believe event like such provides a great platform to meet and share knowledge. Pinal at Pluralsight Booth Here are the abstract of the sessions which I had presented. They were recorded so at some point in time they will be available, but if you want the content of all the courses immediately, I suggest you check out my video courses on the same subject on Pluralsight. Indexes, the Unsung Hero Relevant Pluralsight Course Slow Running Queries are the most common problem that developers face while working with SQL Server. While it is easy to blame SQL Server for unsatisfactory performance, the issue often persists with the way queries have been written, and how Indexes has been set up. The session will focus on the ways of identifying problems that slow down SQL Server, and Indexing tricks to fix them. Developers will walk out with scripts and knowledge that can be applied to their servers, immediately post the session. Indexes are the most crucial objects of the database. They are the first stop for any DBA and Developer when it is about performance tuning. There is a good side as well evil side to indexes. To master the art of performance tuning one has to understand the fundamentals of indexes and the best practices associated with the same. We will cover various aspects of Indexing such as Duplicate Index, Redundant Index, Missing Index as well as best practices around Indexes. SQL Server Performance Troubleshooting: Ancient Problems and Modern Solutions Relevant Pluralsight Course Many believe Performance Tuning and Troubleshooting is an art which has been lost in time. However, truth is that art has evolved with time and there are more tools and techniques to overcome ancient troublesome scenarios. There are three major resources that when bottlenecked creates performance problems: CPU, IO, and Memory. In this session we will focus on High CPU scenarios detection and their resolutions. If time permits we will cover other performance related tips and tricks. At the end of this session, attendees will have a clear idea as well as action items regarding what to do when facing any of the above resource intensive scenarios. Developers will walk out with scripts and knowledge that can be applied to their servers, immediately post the session. To master the art of performance tuning one has to understand the fundamentals of performance, tuning and the best practices associated with the same. We will discuss about performance tuning in this session with the help of Demos. Pinal Dave at GIDS MySQL Performance Tuning – Unexplored Territory Relevant Pluralsight Course Performance is one of the most essential aspects of any application. Everyone wants their server to perform optimally and at the best efficiency. However, not many people talk about MySQL and Performance Tuning as it is an extremely unexplored territory. In this session, we will talk about how we can tune MySQL Performance. We will also try and cover other performance related tips and tricks. At the end of this session, attendees will not only have a clear idea, but also carry home action items regarding what to do when facing any of the above resource intensive scenarios. Developers will walk out with scripts and knowledge that can be applied to their servers, immediately post the session. To master the art of performance tuning one has to understand the fundamentals of performance, tuning and the best practices associated with the same. You will also witness some impressive performance tuning demos in this session. Hidden Secrets and Gems of SQL Server We Bet You Never Knew Relevant Pluralsight Course SQL Trio Session! It really amazes us every time when someone says SQL Server is an easy tool to handle and work with. Microsoft has done an amazing work in making working with complex relational database a breeze for developers and administrators alike. Though it looks like child’s play for some, the realities are far away from this notion. The basics and fundamentals though are simple and uniform across databases, the behavior and understanding the nuts and bolts of SQL Server is something we need to master over a period of time. With a collective experience of more than 30+ years amongst the speakers on databases, we will try to take a unique tour of various aspects of SQL Server and bring to you life lessons learnt from working with SQL Server. We will share some of the trade secrets of performance, configuration, new features, tuning, behaviors, T-SQL practices, common pitfalls, productivity tips on tools and more. This is a highly demo filled session for practical use if you are a SQL Server developer or an Administrator. The speakers will be able to stump you and give you answers on almost everything inside the Relational database called SQL Server. I personally attended the session of Vinod Kumar, Balmukund Lakhani, Abhishek Kumar and my favorite Govind Kanshi. Summary If you have missed this event here are two action items 1) Sign up for Resource Newsletter 2) Watch my video courses on Pluralsight Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: MySQL, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL Tagged: GIDS

    Read the article

  • Telerik is First to Announce Support for Microsoft Silverlight Analytics Framework

    Yesterday at MIX 10 conference Microsoft announced the Microsoft Silverlight Analytics Framework Beta. The Silverlight Analytics Framework (SAF) is a new open-source framework to allow designers and developers to integrate web analytics into Silverlight applications in a consistent manner. Supporting out-of-browser and offline scenarios, Microsoft built this framework in conjunction with a number of web analytics services and control vendors to support multiple analytics services simultaneously without degrading application performance. Because the SAF is enabled as a set of behaviors in Microsoft Expression Blend, designers and developers can visually instrument their designs and configure A/B testing rapidly without writing any code. Telerik is proud to be the first control vendor to support the Silverlight Analytics Framework. RadControls for Silverlight can be used with the framework out of the box. The suite offers Silverlight Analytics Framework handlers and behavior, helping developers to fine tune the values sent to the analytics providers. Because the analytics framework is using the Managed Extensibility Framework (MEF) for composition, you don't need to change the way you use the controls to benefit from the Telerik handlers. Just add a reference to the Telerik assemblies that contains the handlers. Here is the code that you need to declare to use RadTreeView: <UserControl x:Class="Telerik.SLAF.MainPage"         xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"         xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"         xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity"         xmlns:ga="clr-namespace:Google.WebAnalytics;assembly=Google.WebAnalytics"         xmlns:sa="clr-namespace:Microsoft.WebAnalytics.Behaviors;assembly=Microsoft.WebAnalytics.Behaviors"         xmlns:ic="clr-namespace:Microsoft.Expression.Interactivity.Core;assembly=Microsoft.Expression.Interactions"         xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"         xmlns:telerikNavigation="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Navigation">        <Grid x:Name="LayoutRoot">         <i:Interaction.Behaviors>             <ga:GoogleAnalytics ProfileId="--Your GA ProfileId" Category="Demo" />         </i:Interaction.Behaviors>         <telerikNavigation:RadTreeView>             <i:Interaction.Triggers>                 <i:EventTrigger EventName="SelectionChanged">                     <sa:TrackAction />                 </i:EventTrigger>             </i:Interaction.Triggers>             <telerikNavigation:RadTreeViewItem Header="Item1">             </telerikNavigation:RadTreeViewItem>             <telerikNavigation:RadTreeViewItem Header="Item2" />             <telerikNavigation:RadTreeViewItem Header="Item3" />         </telerikNavigation:RadTreeView>     </Grid> </UserControl> Download the Telerik Microsoft Silverlight Analytics Framework Handlers and the sample project. This is our first Beta release - please drop us a line with any feedback you have or even better if you are at MIX10 - come visit us at the booth in the "Commons" hall so we can discuss it in person. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • How to Tell If Your Computer is Overheating and What to Do About It

    - by Chris Hoffman
    Heat is a computer’s enemy. Computers are designed with heat dispersion and ventilation in mind so they don’t overheat. If too much heat builds up, your computer may become unstable or suddenly shut down. The CPU and graphics card produce much more heat when running demanding applications. If there’s a problem with your computer’s cooling system, an excess of heat could even physically damage its components. Is Your Computer Overheating? When using a typical computer in a typical way, you shouldn’t have to worry about overheating at all. However, if you’re encountering system instability issues like abrupt shut downs, blue screens, and freezes — especially while doing something demanding like playing PC games or encoding video — your computer may be overheating. This can happen for several reasons. Your computer’s case may be full of dust, a fan may have failed, something may be blocking your computer’s vents, or you may have a compact laptop that was never designed to run at maximum performance for hours on end. Monitoring Your Computer’s Temperature First, bear in mind that different CPUs and GPUs (graphics cards) have different optimal temperature ranges. Before getting too worried about a temperature, be sure to check your computer’s documentation — or its CPU or graphics card specifications — and ensure you know the temperature ranges your hardware can handle. You can monitor your computer’s temperatures in a variety of different ways. First, you may have a way to monitor temperature that is already built into your system. You can often view temperature values in your computer’s BIOS or UEFI settings screen. This allows you to quickly see your computer’s temperature if Windows freezes or blue screens on you — just boot the computer, enter the BIOS or UEFI screen, and check the temperatures displayed there. Note that not all BIOSes or UEFI screens will display this information, but it is very common. There are also programs that will display your computer’s temperature. Such programs just read the sensors inside your computer and show you the temperature value they report, so there are a wide variety of tools you can use for this, from the simple Speccy system information utility to an advanced tool like SpeedFan. HWMonitor also offer this feature, displaying a wide variety of sensor information. Be sure to look at your CPU and graphics card temperatures. You can also find other temperatures, such as the temperature of your hard drive, but these components will generally only overheat if it becomes extremely hot in the computer’s case. They shouldn’t generate too much heat on their own. If you think your computer may be overheating, don’t just glance as these sensors once and ignore them. Do something demanding with your computer, such as running a CPU burn-in test with Prime 95, playing a PC game, or running a graphical benchmark. Monitor the computer’s temperature while you do this, even checking a few hours later — does any component overheat after you push it hard for a while? Preventing Your Computer From Overheating If your computer is overheating, here are some things you can do about it: Dust Out Your Computer’s Case: Dust accumulates in desktop PC cases and even laptops over time, clogging fans and blocking air flow. This dust can cause ventilation problems, trapping heat and preventing your PC from cooling itself properly. Be sure to clean your computer’s case occasionally to prevent dust build-up. Unfortunately, it’s often more difficult to dust out overheating laptops. Ensure Proper Ventilation: Put the computer in a location where it can properly ventilate itself. If it’s a desktop, don’t push the case up against a wall so that the computer’s vents become blocked or leave it near a radiator or heating vent. If it’s a laptop, be careful to not block its air vents, particularly when doing something demanding. For example, putting a laptop down on a mattress, allowing it to sink in, and leaving it there can lead to overheating — especially if the laptop is doing something demanding and generating heat it can’t get rid of. Check if Fans Are Running: If you’re not sure why your computer started overheating, open its case and check that all the fans are running. It’s possible that a CPU, graphics card, or case fan failed or became unplugged, reducing air flow. Tune Up Heat Sinks: If your CPU is overheating, its heat sink may not be seated correctly or its thermal paste may be old. You may need to remove the heat sink and re-apply new thermal paste before reseating the heat sink properly. This tip applies more to tweakers, overclockers, and people who build their own PCs, especially if they may have made a mistake when originally applying the thermal paste. This is often much more difficult when it comes to laptops, which generally aren’t designed to be user-serviceable. That can lead to trouble if the laptop becomes filled with dust and needs to be cleaned out, especially if the laptop was never designed to be opened by users at all. Consult our guide to diagnosing and fixing an overheating laptop for help with cooling down a hot laptop. Overheating is a definite danger when overclocking your CPU or graphics card. Overclocking will cause your components to run hotter, and the additional heat will cause problems unless you can properly cool your components. If you’ve overclocked your hardware and it has started to overheat — well, throttle back the overclock! Image Credit: Vinni Malek on Flickr     

    Read the article

  • InnoDB Compression Improvements in MySQL 5.6

    - by Inaam Rana
    MySQL 5.6 comes with significant improvements for the compression support inside InnoDB. The enhancements that we'll talk about in this piece are also a good example of community contributions. The work on these was conceived, implemented and contributed by the engineers at Facebook. Before we plunge into the details let us familiarize ourselves with some of the key concepts surrounding InnoDB compression. In InnoDB compressed pages are fixed size. Supported sizes are 1, 2, 4, 8 and 16K. The compressed page size is specified at table creation time. InnoDB uses zlib for compression. InnoDB buffer pool will attempt to cache compressed pages like normal pages. However, whenever a page is actively used by a transaction, we'll always have the uncompressed version of the page as well i.e.: we can have a page in the buffer pool in compressed only form or in a state where we have both the compressed page and uncompressed version but we'll never have a page in uncompressed only form. On-disk we'll always only have the compressed page. When both compressed and uncompressed images are present in the buffer pool they are always kept in sync i.e.: changes are applied to both atomically. Recompression happens when changes are made to the compressed data. In order to minimize recompressions InnoDB maintains a modification log within a compressed page. This is the extra space available in the page after compression and it is used to log modifications to the compressed data thus avoiding recompressions. DELETE (and ROLLBACK of DELETE) and purge can be performed without recompressing the page. This is because the delete-mark bit and the system fields DB_TRX_ID and DB_ROLL_PTR are stored in uncompressed format on the compressed page. A record can be purged by shuffling entries in the compressed page directory. This can also be useful for updates of indexed columns, because UPDATE of a key is mapped to INSERT+DELETE+purge. A compression failure happens when we attempt to recompress a page and it does not fit in the fixed size. In such case, we first try to reorganize the page and attempt to recompress and if that fails as well then we split the page into two and recompress both pages. Now lets talk about the three major improvements that we made in MySQL 5.6.Logging of Compressed Page Images:InnoDB used to log entire compressed data on the page to the redo logs when recompression happens. This was an extra safety measure to guard against the rare case where an attempt is made to do recovery using a different zlib version from the one that was used before the crash. Because recovery is a page level operation in InnoDB we have to be sure that all recompress attempts must succeed without causing a btree page split. However, writing entire compressed data images to the redo log files not only makes the operation heavy duty but can also adversely affect flushing activity. This happens because redo space is used in a circular fashion and when we generate much more than normal redo we fill up the space much more quickly and in order to reuse the redo space we have to flush the corresponding dirty pages from the buffer pool.Starting with MySQL 5.6 a new global configuration parameter innodb_log_compressed_pages. The default value is true which is same as the current behavior. If you are sure that you are not going to attempt to recover from a crash using a different version of zlib then you should set this parameter to false. This is a dynamic parameter.Compression Level:You can now set the compression level that zlib should choose to compress the data. The global parameter is innodb_compression_level - the default value is 6 (the zlib default) and allowed values are 1 to 9. Again the parameter is dynamic i.e.: you can change it on the fly.Dynamic Padding to Reduce Compression Failures:Compression failures are expensive in terms of CPU. We go through the hoops of recompress, failure, reorganize, recompress, failure and finally page split. At the same time, how often we encounter compression failure depends largely on the compressibility of the data. In MySQL 5.6, courtesy of Facebook engineers, we have an adaptive algorithm based on per-index statistics that we gather about compression operations. The idea is that if a certain index/table is experiencing too many compression failures then we should try to pack the 16K uncompressed version of the page less densely i.e.: we let some space in the 16K page go unused in an attempt that the recompression won't end up in a failure. In other words, we dynamically keep adding 'pad' to the 16K page till we get compression failures within an agreeable range. It works the other way as well, that is we'll keep removing the pad if failure rate is fairly low. To tune the padding effort two configuration variables are exposed. innodb_compression_failure_threshold_pct: default 5, range 0 - 100,dynamic, implies the percentage of compress ops to fail before we start using to padding. Value 0 has a special meaning of disabling the padding. innodb_compression_pad_pct_max: default 50, range 0 - 75, dynamic, the  maximum percentage of uncompressed data page that can be reserved as pad.

    Read the article

  • Subterranean IL: Generics and array covariance

    - by Simon Cooper
    Arrays in .NET are curious beasts. They are the only built-in collection types in the CLR, and SZ-arrays (single dimension, zero-indexed) have their own commands and IL syntax. One of their stranger properties is they have a kind of built-in covariance long before generic variance was added in .NET 4. However, this causes a subtle but important problem with generics. First of all, we need to briefly recap on array covariance. SZ-array covariance To demonstrate, I'll tweak the classes I introduced in my previous posts: public class IncrementableClass { public int Value; public virtual void Increment(int incrementBy) { Value += incrementBy; } } public class IncrementableClassx2 : IncrementableClass { public override void Increment(int incrementBy) { base.Increment(incrementBy); base.Increment(incrementBy); } } In the CLR, SZ-arrays of reference types are implicitly convertible to arrays of the element's supertypes, all the way up to object (note that this does not apply to value types). That is, an instance of IncrementableClassx2[] can be used wherever a IncrementableClass[] or object[] is required. When an SZ-array could be used in this fashion, a run-time type check is performed when you try to insert an object into the array to make sure you're not trying to insert an instance of IncrementableClass into an IncrementableClassx2[]. This check means that the following code will compile fine but will fail at run-time: IncrementableClass[] array = new IncrementableClassx2[1]; array[0] = new IncrementableClass(); // throws ArrayTypeMismatchException These checks are enforced by the various stelem* and ldelem* il instructions in such a way as to ensure you can't insert a IncrementableClass into a IncrementableClassx2[]. For the rest of this post, however, I'm going to concentrate on the ldelema instruction. ldelema This instruction pops the array index (int32) and array reference (O) off the stack, and pushes a pointer (&) to the corresponding array element. However, unlike the ldelem instruction, the instruction's type argument must match the run-time array type exactly. This is because, once you've got a managed pointer, you can use that pointer to both load and store values in that array element using the ldind* and stind* (load/store indirect) instructions. As the same pointer can be used for both input and output to the array, the type argument to ldelema must be invariant. At the time, this was a perfectly reasonable restriction, and maintained array type-safety within managed code. However, along came generics, and with it the constrained callvirt instruction. So, what happens when we combine array covariance and constrained callvirt? .method public static void CallIncrementArrayValue() { // IncrementableClassx2[] arr = new IncrementableClassx2[1] ldc.i4.1 newarr IncrementableClassx2 // arr[0] = new IncrementableClassx2(); dup newobj instance void IncrementableClassx2::.ctor() ldc.i4.0 stelem.ref // IncrementArrayValue<IncrementableClass>(arr, 0) // here, we're treating an IncrementableClassx2[] as IncrementableClass[] dup ldc.i4.0 call void IncrementArrayValue<class IncrementableClass>(!!0[],int32) // ... ret } .method public static void IncrementArrayValue<(IncrementableClass) T>( !!T[] arr, int32 index) { // arr[index].Increment(1) ldarg.0 ldarg.1 ldelema !!T ldc.i4.1 constrained. !!T callvirt instance void IIncrementable::Increment(int32) ret } And the result: Unhandled Exception: System.ArrayTypeMismatchException: Attempted to access an element as a type incompatible with the array. at IncrementArrayValue[T](T[] arr, Int32 index) at CallIncrementArrayValue() Hmm. We're instantiating the generic method as IncrementArrayValue<IncrementableClass>, but passing in an IncrementableClassx2[], hence the ldelema instruction is failing as it's expecting an IncrementableClass[]. On features and feature conflicts What we've got here is a conflict between existing behaviour (ldelema ensuring type safety on covariant arrays) and new behaviour (managed pointers to object references used for every constrained callvirt on generic type instances). And, although this is an edge case, there is no general workaround. The generic method could be hidden behind several layers of assemblies, wrappers and interfaces that make it a requirement to use array covariance when calling the generic method. Furthermore, this will only fail at runtime, whereas compile-time safety is what generics were designed for! The solution is the readonly. prefix instruction. This modifies the ldelema instruction to ignore the exact type check for arrays of reference types, and so it lets us take the address of array elements using a covariant type to the actual run-time type of the array: .method public static void IncrementArrayValue<(IncrementableClass) T>( !!T[] arr, int32 index) { // arr[index].Increment(1) ldarg.0 ldarg.1 readonly. ldelema !!T ldc.i4.1 constrained. !!T callvirt instance void IIncrementable::Increment(int32) ret } But what about type safety? In return for ignoring the type check, the resulting controlled mutability pointer can only be used in the following situations: As the object parameter to ldfld, ldflda, stfld, call and constrained callvirt instructions As the pointer parameter to ldobj or ldind* As the source parameter to cpobj In other words, the only operations allowed are those that read from the pointer; stind* and similar that alter the pointer itself are banned. This ensures that the array element we're pointing to won't be changed to anything untoward, and so type safety within the array is maintained. This is a typical example of the maxim that whenever you add a feature to a program, you have to consider how that feature interacts with every single one of the existing features. Although an edge case, the readonly. prefix instruction ensures that generics and array covariance work together and that compile-time type safety is maintained. Tune in next time for a look at the .ctor generic type constraint, and what it means.

    Read the article

  • Computer Networks UNISA - Chap 15 &ndash; Network Management

    - by MarkPearl
    After reading this section you should be able to Understand network management and the importance of documentation, baseline measurements, policies, and regulations to assess and maintain a network’s health. Manage a network’s performance using SNMP-based network management software, system and event logs, and traffic-shaping techniques Identify the reasons for and elements of an asset managements system Plan and follow regular hardware and software maintenance routines Fundamentals of Network Management Network management refers to the assessment, monitoring, and maintenance of all aspects of a network including checking for hardware faults, ensuring high QoS, maintaining records of network assets, etc. Scope of network management differs depending on the size and requirements of the network. All sub topics of network management share the goals of enhancing the efficiency and performance while preventing costly downtime or loss. Documentation The way documentation is stored may vary, but to adequately manage a network one should at least record the following… Physical topology (types of LAN and WAN topologies – ring, star, hybrid) Access method (does it use Ethernet 802.3, token ring, etc.) Protocols Devices (Switches, routers, etc) Operating Systems Applications Configurations (What version of operating system and config files for serve / client software) Baseline Measurements A baseline is a report of the network’s current state of operation. Baseline measurements might include the utilization rate for your network backbone, number of users logged on per day, etc. Baseline measurements allow you to compare future performance increases or decreases caused by network changes or events with past network performance. Obtaining baseline measurements is the only way to know for certain whether a pattern of usage has changed, or whether a network upgrade has made a difference. There are various tools available for measuring baseline performance on a network. Policies, Procedures, and Regulations Following rules helps limit chaos, confusion, and possibly downtime. The following policies and procedures and regulations make for sound network management. Media installations and management (includes designing physical layout of cable, etc.) Network addressing policies (includes choosing and applying a an addressing scheme) Resource sharing and naming conventions (includes rules for logon ID’s) Security related policies Troubleshooting procedures Backup and disaster recovery procedures In addition to internal policies, a network manager must consider external regulatory rules. Fault and Performance Management After documenting every aspect of your network and following policies and best practices, you are ready to asses you networks status on an on going basis. This process includes both performance management and fault management. Network Management Software To accomplish both fault and performance management, organizations often use enterprise-wide network management software. There various software packages that do this, each collect data from multiple networked devices at regular intervals, in a process called polling. Each managed device runs a network management agent. So as not to affect the performance of a device while collecting information, agents do not demand significant processing resources. The definition of a managed devices and their data are collected in a MIB (Management Information Base). Agents communicate information about managed devices via any of several application layer protocols. On modern networks most agents use SNMP which is part of the TCP/IP suite and typically runs over UDP on port 161. Because of the flexibility and sophisticated network management applications are a challenge to configure and fine-tune. One needs to be careful to only collect relevant information and not cause performance issues (i.e. pinging a device every 5 seconds can be a problem with thousands of devices). MRTG (Multi Router Traffic Grapher) is a simple command line utility that uses SNMP to poll devices and collects data in a log file. MRTG can be used with Windows, UNIX and Linux. System and Event Logs Virtually every condition recognized by an operating system can be recorded. This is typically done using event logs. In Windows there is a GUI event log viewer. Similar information is recorded in UNIX and Linux in a system log. Much of the information collected in event logs and syslog files does not point to a problem, even if it is marked with a warning so it is important to filter your logs appropriately to reduce the noise. Traffic Shaping When a network must handle high volumes of network traffic, users benefit from performance management technique called traffic shaping. Traffic shaping involves manipulating certain characteristics of packets, data streams, or connections to manage the type and amount of traffic traversing a network or interface at any moment. Its goals are to assure timely delivery of the most important traffic while offering the best possible performance for all users. Several types of traffic prioritization exist including prioritizing traffic according to any of the following characteristics… Protocol IP address User group DiffServr VLAN tag in a Data Link layer frame Service or application Caching In addition to traffic shaping, a network or host might use caching to improve performance. Caching is the local storage of frequently needed files that would otherwise be obtained from an external source. By keeping files close to the requester, caching allows the user to access those files quickly. The most common type of caching is Web caching, in which Web pages are stored locally. To an ISP, caching is much more than just convenience. It prevents a significant volume of WAN traffic, thus improving performance and saving money. Asset Management Another key component in managing networks is identifying and tracking its hardware. This is called asset management. The first step to asset management is to take an inventory of each node on the network. You will also want to keep records of every piece of software purchased by your organization. Asset management simplifies maintaining and upgrading the network chiefly because you know what the system includes. In addition, asset management provides network administrators with information about the costs and benefits of certain types of hardware or software. Change Management Networks are always in a stage of flux with various aspects including… Software changes and patches Client Upgrades Shared Application Upgrades NOS Upgrades Hardware and Physical Plant Changes Cabling Upgrades Backbone Upgrades For a detailed explanation on each of these read the textbook (Page 750 – 761)

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22  | Next Page >