Search Results

Search found 124254 results on 4971 pages for 'ubuntu one api'.

Page 18/4971 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Ubuntu 12.04 LDAP SSL self-signed cert not accepted

    - by MaddHacker
    I'm working with Ubuntu 12.04, using OpenLDAP server. I've followed the instructions on the Ubuntu help pages and can happily connect without security. To test my connection, I'm using ldapsearch the command looks like: ldapsearch -xv -H ldap://ldap.[my host].local -b dc=[my domain],dc=local -d8 -ZZ I've also used: ldapsearch -xv -H ldaps://ldap.[my host].local -b dc=[my domain],dc=local -d8 As far as I can tell, I've setup my certificate correctly, but no matter why I try, I can't seem to get ldapsearch to accept my self-signed certificate. So far, I've tried: Updating my /etc/ldap/ldap.conf file to look like: BASE dc=[my domain],dc=local URI ldaps://ldap.[my host].local TLS_CACERT /etc/ssl/certs/cacert.crt TLS_REQCERT allow Updating my /etc/ldap.conf file to look like: base dc=[my domain],dc=local uri ldapi:///ldap.[my host].local uri ldaps:///ldap.[my host].local ldap_version 3 ssl start_tls ssl on tls_checkpeer no TLS_REQCERT allow Updating my /etc/default/slapd to include: SLAPD_SERVICES="ldap:/// ldapi:/// ldaps:///" Several hours of Googling, most of which resulted in adding the TLS_REQCERT allow The exact error I'm seeing is: ldap_initialize( ldap://ldap.[my host].local ) request done: ld 0x20038710 msgid 1 TLS certificate verification: Error, self signed certificate in certificate chain TLS: can't connect. ldap_start_tls: Connect error (-11) additional info: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed After several hours of this, I was hoping someone else has seen this issue, and/or knows how to fix it. Please do let me know if I should add more information, or if you need further data.

    Read the article

  • Ubuntu 9.1 Install from Disc Stalls After "Install Ubuntu" Sleclection is Made - eMachine

    - by nicorellius
    I am trying to install Ubuntu 9.1 from the ISO on a CD (it needs to be this version) on an eMachine with a brand new Seagate hard disk. The CD boots OK, and I choose the language. Then I am presented with the choices: Try Ubuntu Install Ubuntu.... etc, etc... I have tried the top two choices several times (trying Ubuntu and installing it), but each and every time the installation stalls and the disc stops spinning right after I hit enter after choosing the option I want. I have tried different CD/DVD drives, changing the jumpers on both CD drives, different hard drives, and nothing works. Maybe there is a BIOS setting that is choking the installation? Any help would be appreciated.

    Read the article

  • Port forwarding + shared connection with Ubuntu

    - by Joey Adams
    Because my wireless router's ethernet ports are defective, I set up a shared wireless connection from my laptop (which has wifi) to my eMac (which does not) via a crossover ethernet cable. The laptop is behind a router as 192.168.1.131, and the eMac is behind the laptop as 10.42.43.1 . The laptop is running Ubuntu 9.10 (Karmic). I achieved the shared connection through NetworkManager Applet. I right-clicked on the network icon at the topright, went to Edit Connections, selected the Wired connection named "Auto eth0", clicked "Edit...", went to the "IPv4 Settings" tab, and selected the Method "Shared to other computers". The eMac can now access the Internet. Now I want to enable port forwarding. There's a game I want to play that needs port 6112 forwarded (both TCP and UDP) in order to host games. I set up the router to enable port forwarding for 192.168.1.131 (the laptop), but port forwarding still isn't available on the eMac. I suppose I need to pretend my laptop is a router and configure port forwarding on it, indicating that incoming connections to the laptop (192.168.1.131) should be forwarded to the eMac on the shared connection (10.42.43.1 ). Thus, packets coming into the router on port 6112 would be redirected to the laptop (by the router), then to the eMac (by the laptop). My question is, how would I do that on Ubuntu (in light of NetworkManager's presence)? Also, if I can't get this to work, does anyone mind hosting a comp stomp? :D

    Read the article

  • Install Ubuntu 10.10 from loopback mounted ISO image

    - by Zifre
    I have a laptop with a faulty BIOS that has stopped booting from CDs even though it supports it (and it doesn't support booting from USB drives). I am trying to install Ubuntu 10.10 on it. I already had 9.10 installed. I tried using Kexec, but it refused to accept the kernel image. Eventually I found this page which shows how to make GRUB 2 boot from an ISO file. That worked fine, and I am now running the live image from the file. (If I can get this to work, it will be my new preferred way of installing Ubuntu, as it saves CDs and boots much faster.) However, I can't install it. The installer won't make changes to the hard drive, because the partition containing the ISO is mounted (and can't be unmounted because it is in use). Even if I only choose to use other partitions that are not mounted, the installer refuses to go any farther. Clearly, it should be possible using other partitions on the same disk. Is there any way to work around this issue or force the installer to go ahead?

    Read the article

  • Installing 64-bit Ubuntu alongside 32-bit Ubuntu?

    - by Macha
    I have a 64-bit processor in my PC, but because of worries over application compatibility, up until now I have been using 32-bit Ubuntu (and 32-bit Vista because Dell wouldn't sell me 64-bit with my PC). Is it possible for me to install 64-bit Ubuntu alongside 32-bit ubuntu and 32-bit Windows Vista, so I can choose between them at boot and share data, and without uninstalling my 32-bit Ubuntu? My partitions are as follows Drive 1: 10 GB Vista recovery partition (E:), 240 GB Windows NTFS parition (230 GB used, C:). Drive 2: 167 GB Windows NTFS Partition (130 GB used, D: ), 8 GB swap partition, 13 GB / partition (6 GB used), 62 GB /home partition (20 GB used).

    Read the article

  • Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

    - by Develop7
    Intro I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 Problem But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator screams "Logon failure" upon connect attempt, and, respectively, fails to connect. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d Question So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

    Read the article

  • Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

    - by develop7
    Preface: I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator tells "Logon failure" upon connect attempt. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

    Read the article

  • Updating Dell PowerEdge firmware on Ubuntu?

    - by Shtééf
    The company I work for recently got hands on a batch of second hand PowerEdge SC1425 machines. We'd like to put these to good use. Our operating system of choice is Ubuntu Server 10.04 64-bit, which installs just peachy on this type of machine. Now I'd like to install the firmware updates from Dell, which are apparently marked as recommended. This includes the updates for the BIOS, the BMC, and possibly some other hardware. I find it incredibly difficult to locate the files on the Dell website, and install any of them on an Ubuntu system: I downloaded the file OM_6.2.0_SUU_A01.iso. I believe I've read that the SUU DVD should be able to update any recent PowerEdge. Is this correct? Is this the latest version? Besides the version number, does A01 have any meaning? Is this image bootable? (At the moment, I just nosed around with a loop device mount.) Running /bin/bash ./suu from the DVD, I get: # /bin/bash ./suu ./suu: line 262: ./java/linux/i386/bin/java: No such file or directory The file exists and is executable, though. But I cannot execute it directly from the shell either.

    Read the article

  • Ubuntu-VirtualBox-LikeWiseOpen network disaster

    - by Sergio
    I've a virtual machine on VirtualBox 4.1.4 with Ubuntu 11.04. It was working perfectly, but after a reboot something really wrong happened: I wasn't able to connect to the internal network (same for NAT). $ sudo dhclient -v Internet Systems Consortium DHCP Client 4.1.1-P1 Copyright 2004-2010 Internet System Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Error creating socket to list interfaces; Permission denied Can't get list of interfaces. The network interface is PCnet-FAST III. Additional information: $ uname -a Linux LinuxFileServer 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/Linux Any ideas? Thanks EDIT: $ sudo ifconfig -a eth1 Link encap:Ethernet HWaddr 08:00:27:af:f2:c7 indirizzo inet6: fe80::a00:27ff:feaf:f2c7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisioni:0 txqueuelen:1000 Byte RX:0 (0 B) Byte TX:3870 (3.8 KB) Interrupt:10 lo Link encap:Loopback locale indirizzo inet:127.0.0.1 Maschera:255.0.0.0 indirizzo inet6: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisioni:0 txqueuelen:0 Byte RX:960 (960.0 B) Byte TX:960 (960.0 B)

    Read the article

  • Wireless disconnects at random after upgrade to Ubuntu 10.4

    - by Daniel Elessedil Kjeserud
    After upgrading my home server from Ubuntu 8.10 to 10.4 my wireless seemingly drops out, even though my IRC client keeps it's connection to the servers, so it looks like the machine just stops taking wireless requests. A ping will give a me this Request timeout for icmp_seq 27 ping: sendto: Host is down After a while the machine just starts responding again, without any interaction from me. When the machine comes back, this is what dmesg gives me [ 18.296288] wlan0: direct probe to AP 00:1b:63:22:a4:5f (try 1) [ 18.296350] wlan0: deauthenticating from 00:1b:63:22:a4:5f by local choice (reason=3) [ 18.296440] wlan0: direct probe to AP 00:1b:63:22:a4:5f (try 1) [ 18.298697] wlan0: direct probe responded [ 18.298706] wlan0: authenticate with AP 00:1b:63:22:a4:5f (try 1) [ 18.306836] wlan0: authenticated [ 18.306886] wlan0: associate with AP 00:1b:63:22:a4:5f (try 1) [ 18.309396] wlan0: RX AssocResp from 00:1b:63:22:a4:5f (capab=0x411 status=0 aid=2) [ 18.309402] wlan0: associated [ 18.310187] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 18.447742] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 18.447748] apm: overridden by ACPI. [ 19.163282] padlock: VIA PadLock not detected. [ 28.352022] wlan0: no IPv6 routers present kjes@brin:~$ lspci 02:07.0 Network controller: RaLink RT2561/RT61 rev B 802.11g It's on a wireless network with WPA2, the machine worked without any problems on the same wireless network since Ubuntu 8.10 was the most resent version, and there have been no changes to my network recently. Even though the server drops out, everything else on the network keeps working like normal.

    Read the article

  • X-ming, Ubuntu apps - getting the Ubuntu style/theme to load

    - by user5402
    I am running X-ming on Windows 7 and using putty to ssh into an Ubuntu system. On the Ubuntu system I use the command: $ gnome-terminal & to display a terminal back on the Windows box. When I do this I don't get the standard Ubuntu style, i.e. dark purple background, Mono font, solid cursor (which I've configured in the Gnome Control Center.) Instead I get a very plain style - white background, blinking cursor, very small font. However, if I run gnome-control-center and then click on, say, the Keyboard icon, the terminal window will be reconfigured with the Ubuntu style with my customizations (e.g. block cursor vs. blinking cursor.) Just starting one of the control applets seems to trigger this style change. My question is: How can I trigger this style change more directly - without having to launch the Gnome Control center and launching one of the configuration applets?

    Read the article

  • Port forwarding + shared connection with Ubuntu

    - by Joey Adams
    Because my wireless router's ethernet ports are defective, I set up a shared wireless connection from my laptop (which has wifi) to my eMac (which does not) via a crossover ethernet cable. The laptop is behind a router as 192.168.1.131, and the eMac is behind the laptop as 10.42.43.1 . The laptop is running Ubuntu 9.10 (Karmic). I achieved the shared connection through NetworkManager Applet. I right-clicked on the network icon at the topright, went to Edit Connections, selected the Wired connection named "Auto eth0", clicked "Edit...", went to the "IPv4 Settings" tab, and selected the Method "Shared to other computers". The eMac can now access the Internet. Now I want to enable port forwarding. There's a game I want to play that needs port 6112 forwarded (both TCP and UDP) in order to host games. I set up the router to enable port forwarding for 192.168.1.131 (the laptop), but port forwarding still isn't available on the eMac. I suppose I need to pretend my laptop is a router and configure port forwarding on it, indicating that incoming connections to the laptop (192.168.1.131) should be forwarded to the eMac on the shared connection (10.42.43.1 ). Thus, packets coming into the router on port 6112 would be redirected to the laptop (by the router), then to the eMac (by the laptop). My question is, how would I do that on Ubuntu (in light of NetworkManager's presence)? Also, if I can't get this to work, does anyone mind hosting a comp stomp? :D

    Read the article

  • Remove (or add) Entry in Indicator-Applet (Ubuntu/GNOME)

    - by Tim Lytle
    I can't seem to find a guide or reference on how to configure the 'indicator-applet' (aka MessagingMenu) that came about in the 9.04 release of Ubuntu. It's that little mail icon that lists messaging apps. I can find docs about what it should do, people complaining about how it works, references that the API changed in 9.10, but not much on how to change the configuration. The MessagingMenu design spec page says that the config file should be at $HOME/.config/indicators/messages/applications/, but there's nothing there on my install (9.10).

    Read the article

  • Kernel Memory Leak in Ubuntu 9.10?

    - by kayahr
    After some days of work (Using suspend-to-ram during the night) I notice I loose more and more available memory. Even when I close all applications the situation doesn't improve. I even went down to the command line and closed ALL running processes except the init process and the bash I'm working in. I unmounted all these ram disks which Ubuntu is using, I even unloaded all modules which could be unloaded. But still "free" tells me that 1 GB of RAM is used (without buffers/cache). In "top" there is no visible process which occupies all this memory. The only way to free the memory is restarting the machine. How can I find out where I lose all this memory? Is there a known "suspect" who can cause a problem like this? I'm using Ubuntu 9.10 64 bit on a Dell Latitude E6500 (4 GB RAM) with the latest closed-source nvidia driver and Gnome with Compiz. The applications I use most of the time are firefox and eclipse. Any hints how I can find the problem? I'm not a kernel hacker so if the solution is patching the kernel or something like that then I might be out of the game...

    Read the article

  • VPN on a ubuntu server limited to certain ips

    - by Hultner
    I got an server running Ubuntu Server 9.10 and I need access to it and other parts of my network sometimes when not at home. There's two places I need to access the VPN from. One of the places to an static IP and the other got an dynamic but with DynDNS setup so I can always get the current IP if I want to. Now when it comes to servers people call me kinda paranoid but security is always my number one priority and I never like to allow access to the server outside the network therefor I have two things I have to have on this VPN. One it shouldn't be accessiable from any other IP then these 2 and two it has to use a very secure key so it will be virtually impossible to bruteforce even from the said IP´s. I have no experience what so ever in setting up VPNs, I have used SSH tunneling but never an actuall VPN. So what would be the best, most stable, safest and performance effiecent way to set this up on a Ubuntu Server? Is it possible or should I just set up some kind of SSH Tunnel instead? Thanks on beforehand for answers.

    Read the article

  • Ubuntu 9.10 LiveCD stalls after "Install Ubuntu" selected from boot menu on eMachines

    - by nicorellius
    I am trying to install Ubuntu 9.10 from the ISO on a CD (it needs to be this version) on an eMachine with a brand new Seagate hard disk. The CD boots OK, and I choose the language. Then I am presented with the boot menu: Try Ubuntu Install Ubuntu etc I have tried the top two choices several times (trying Ubuntu and installing it), but each and every time the installation stalls and the disc stops spinning right after I hit enter after choosing the option I want. I have tried different CD/DVD drives, changing the jumpers on both CD drives, different hard drives, and nothing works. Maybe there is a BIOS setting that is choking the installation? Any help would be appreciated. Edit - I just tried running the hard drive as the master on the primary IDE and the CD drive as the slave on the primary with the same results. Maybe flash the BIOS?

    Read the article

  • How do I reinitialise a failed RAID 5 drive using terminal on Ubuntu Server

    - by Stephen
    I've currently put together a new system and part of that has been creating a software RAID 5 using 'mdadm' in Ubuntu Server. I successfully got to the point where I create the array using: sudo mdadm --create --verbose /dev/md0 --level=5 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 I left it to do its thing overnight then used the following command to check on it: watch cat /proc/mdstat To which the following was returned: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[4](S) sdc1[2] sdb1[1] sda1[0](F) 5860535808 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/2] [_UU_] unused devices: <none> It appears that one has failed (and I'm not too savvy with why another is a spare). So, just to be sure that something else isn't amiss I wanted to try and re-engage the failed drive. Can someone explain how I can do that and what I should do with the spare (if anything). And also how do I know when synchronisation is complete? The tutorial I used to get this far is located here: http://sonniesedge.co.uk/2009/06/13/software-raid-5-on-ubuntu-904/ Many thanks! p.s. Here is some extra information that may help: sudo mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Mon Jun 18 21:14:21 2012 Raid Level : raid5 Array Size : 5860535808 (5589.04 GiB 6001.19 GB) Used Dev Size : 1953511936 (1863.01 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Mon Jun 18 21:50:26 2012 State : clean, FAILED Active Devices : 2 Working Devices : 3 Failed Devices : 1 Spare Devices : 1 Layout : left-symmetric Chunk Size : 512K Name : myraidbox:0 (local to host myraidbox) UUID : a269ee94:a161600c:fb1665e7:bd2f27b3 Events : 13 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 33 2 active sync /dev/sdc1 3 0 0 3 removed 0 8 1 - faulty spare /dev/sda1 4 8 49 - spare /dev/sdd1

    Read the article

  • Flickering dual screens in Virtual Box Ubuntu 13.10 Guest

    - by alexleonard
    I have Ubuntu 13.10 x64 installed as a guest in VirtualBox (under a Windows 8.1 host) and have the settings for the virtual machine setup to run with a monitor count of 2, 128MB video memory and 3D acceleration enabled. In my guest I have the virtual box additions installed (which allowed me to have two 1920x1080 screens). Here's a screenshot of my VM settings. My laptop is an Asus N550JV which has both Intel's HD Graphics 4600 GPU and Nvidia's GeForce GT 750M. By default though I believe the Intel GFX card is being used to render the VM. When I boot up the VM it loads perfectly on dual screens, however whenever I move the mouse from one screen to the other (I have a Dell S2340L running over a HDMI connection as a second screen) the screen flickers. I've tried a variety of settings changes in both Ubuntu and the VM settings, but cannot seem to stop this screen flicker. I also used the NVidia control panel in Windows to force the dedicated graphics card to always be used but found that the display driver sometimes crashed whilst working in the VM, resulting in my VM session being destroyed, so I figured it's better to stick with the Intel GFX as that appears to be more stable. I also tried without 3D acceleration but that was much worse, and if I ran the VM with a low amount of graphics memory it really struggled. Here's my dmesg output: http://pastebin.com/1LJuYWMj (not sure if this is helpful in this situation). I read some posts suggesting changes to /etc/X11/xorg.conf but I don't appear to have an xorg.conf file. There were also a few posts (though related to Synergy) suggesting running xset -dpms but this command doesn't appear to have had any effect for me. As an additional note, I'm finding that window drawing in the guest is a little laggy/glitchy. For example, quickly scrolling through a web page may result in parts of the viewport displaying original content. Certainly I notice drawing issues most in the web browser, but it also impacts other software with parts of the window not being drawn when, say, switching between accounts in thunderbird. Any suggestions greatly appreciated!

    Read the article

  • Facebook Graph API authentication in canvas app and track session

    - by cdpnet
    Short question is: how can i use graph api oauth redirects mechanism to authenticate user and save retrieved access_token and also use javascript SDK when needed (the problem is javascript SDK will have different access_token when initialized). I have initially setup my facebook iframe canvas app, with single sign on. This works well with graph api, as I am able to use access_token saved by facebook's javascript when it detects sessionchange(user logged in). But, I want to rather not do single sign-on. But, use graph api redirect and force user to send to a permissions dialog. But, if he has already given permissions, I shouldn't redirect user. How to handle this? Another question: I have done graph api redirects for authentication and have retrieved access_token also. But then, what if I want to use javascript call FB.ui to do stream.Publish? I think it will use it's own access_token which is set during FB.init and detecting session. So, I am looking for some path here. How to use graph api for authentication and also use facebook's javascript SDK when needed. P.S. I'm using ASP .NET MVC 2. I have an authentication filter developed, which needs to detect the user's authentication state and redirect.(currently it does this to graph api authorize url)

    Read the article

  • OpenCV install problems on Studio 12.04 - broken dependencies

    - by Will
    I'm trying to follow the Ubuntu OpenCV documentation at OpenCV. The provided script has a line which executed for some time, taking away more packages than I expected (such as ubuntu-studio video); sudo apt-get -qq remove ffmpeg x264 libx264-dev When the script gets to the line below, it bombs; sudo apt-get -qq install libopencv-dev build-essential checkinstall cmake pkg-config yasm libtiff4-dev libjpeg-dev libjasper-dev libavcodec-dev libavformat-dev libswscale-dev libdc1394-22-dev libxine-dev libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev libv4l-dev python-dev python-numpy libtbb-dev libqt4-dev libgtk2.0-dev libfaac-dev libmp3lame-dev libopencore-amrnb-dev libopencore-amrwb-dev libtheora-dev libvorbis-dev libxvidcore-dev x264 v4l-utils ffmpeg The error msg is; E: Unable to correct problems, you have held broken packages. I've since run Update-Manager, run sudo apt-get updates, rebooted, tried the above script line manually, and still no change. I've just run sudo apt-get install -f and nothing seemed to change. It did mention that some packages were no longer needed and could be removed by apt-get autoremove, so I ran that. It removed a number of packages, so I reran the install command above. Still same problem of held broken packages. I just ran sudo apt-get -u dist-upgrade Part of the response was; The following packages have been kept back: gstreamer0.10-ffmpeg I'm not sure what that means. I do know that it shows up in my Update-Manager and cannot be checked I then ran sudo dpkg --configure -a and then reran sudo apt-get -f install and the package was still not upgraded, though there was this very interesting comment; Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: gstreamer0.10-ffmpeg : Depends: libavcodec53 (< 5:0) but it is not going to be installed or libavcodec-extra-53 (< 5:0) but 5:0.7.2-1ubuntu1+codecs1~oneiric2 is to be installed E: Unable to correct problems, you have held broken packages. Then I ran sudo apt-get -u dist-upgrade It showed I had one held package, so I ran; sudo apt-get -o Debug::pkgProblemResolver=yes dist-upgrade It also exited without upgrading the package, so I ran; sudo apt-get remove --dry-run gstreamer0.10-ffmpeg:i386 And it gave me; *The following packages will be REMOVED: arista gstreamer0.10-ffmpeg 0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded. Remv arista [0.9.7-3ubuntu1] Remv gstreamer0.10-ffmpeg [0.10.12-1ubuntu1]* But when I reran sudo apt-get -u dist-upgrade It showed the package was still there. *The following packages have been kept back: gstreamer0.10-ffmpeg 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.* Update: Just went into Synaptic PM and completely removed gstreamer0.10-ffmpeg Reran sudo apt-get -u dist-upgrade And was told; 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. However, when I ran the original apt-get to install opencv (first code at the top of this question), it still gave me the same broken package errors. So I tried $ cat /etc/apt/sources.list # # deb cdrom:[Ubuntu-Studio 11.10 _Oneiric Ocelot_ - Release i386 (20111011.1)]/ oneiric main multiverse restricted universe # deb cdrom:[Ubuntu-Studio 11.10 _Oneiric Ocelot_ - Release i386 (20111011.1)]/ oneiric main multiverse restricted universe # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://us.archive.ubuntu.com/ubuntu/ precise main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://us.archive.ubuntu.com/ubuntu/ precise-updates main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://us.archive.ubuntu.com/ubuntu/ precise universe deb-src http://us.archive.ubuntu.com/ubuntu/ precise universe deb http://us.archive.ubuntu.com/ubuntu/ precise-updates universe deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://us.archive.ubuntu.com/ubuntu/ precise multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ precise multiverse deb http://us.archive.ubuntu.com/ubuntu/ precise-updates multiverse deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://security.ubuntu.com/ubuntu precise-security main restricted deb-src http://security.ubuntu.com/ubuntu precise-security main restricted deb http://security.ubuntu.com/ubuntu precise-security universe deb-src http://security.ubuntu.com/ubuntu precise-security universe deb http://security.ubuntu.com/ubuntu precise-security multiverse deb-src http://security.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu oneiric partner ## Uncomment the following two lines to add software from Ubuntu's ## 'extras' repository. ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. # deb http://extras.ubuntu.com/ubuntu oneiric main # deb-src http://extras.ubuntu.com/ubuntu oneiric main # deb http://download.opensuse.org/repositories/home:/popinet/xUbuntu_11.04 ./ # disabled on upgrade to precise and then; $ cat /etc/apt/sources.list.d/* But I don't have enough reputation to post the results here (it says I need at least 10 reputation points to post more than 2 links), so I don't know how to provide the requested feedback. Then tried; $ sudo apt-get check [sudo] password for <abcd>: Reading package lists... Done Building dependency tree Reading state information... Done However, no resolution of the problem yet. What else do I need to do? Will an upgrade to Ubuntu Studio 13.xx solve this problem (or compound it)?

    Read the article

  • How to do this Unidirectional NHibernate one-to-one mapping?

    - by JMSA
    This is a problem of unidirectional one-to-one mapping in NHibernate. Student.cs public class Student { public int ID { get; set; } public int Roll { get; set; } public int RegNo { get; set; } public string Name { get; set; } public StudentDetail StudentDetail { get; set; } } StudentDetail.cs public class StudentDetail { public int ID { get; set; } public string Father { get; set; } public string Mother { get; set; } } How can I map these classes (how do the hbm mapping files look like) to the following case of one-to-one relationship? Please have a look at the classes very carefully.

    Read the article

  • Tomboy error while tring to sync with Ubuntu one; Can anyone help?

    - by Michael Chapman
    So I'm sure you've heard the song before, but after trying to sync my notes with Ubuntu One(on 10.10 AMD64) I get "Could not synchronize notes. Check the details below and try again." Of course the problem is that there are no details and trying again doesn't help. So I ran tomboy -debug and compared my error to any thing I could find about similar problems (such as the post here) but found nothing useful. Any way here's my first error, I got this using preferencessynchronizationUbuntu_one [ERROR 21:08:42.271] Synchronization failed with the following exception: String was not recognized as a valid DateTime. at System.DateTime.Parse (System.String s, IFormatProvider provider, DateTimeStyles styles) [0x00000] in <filename unknown>:0 at System.DateTime.Parse (System.String s, IFormatProvider provider) [0x00000] in <filename unknown>:0 at System.DateTime.Parse (System.String s) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.NoteInfo.ParseJson (Hyena.Json.JsonObject jsonObj) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.UserInfo.ParseJsonNoteArray (Hyena.Json.JsonArray jsonArray) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.UserInfo.ParseJsonNotes (System.String jsonString, System.Nullable`1& latestSyncRevision) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.UserInfo.GetNotes (Boolean includeContent, Int32 sinceRevision, System.Nullable`1& latestSyncRevision) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.WebSyncServer.GetNoteUpdatesSince (Int32 revision) [0x00000] in <filename unknown>:0 at Tomboy.Sync.SyncManager.SynchronizationThread () [0x00000] in <filename unknown>:0 The next thing I tried was using preferencessynchronizationtomboy_web with the default 'http://one.ubuntu.com/notes/' and got the same error plus one more. [ERROR 21:12:31.949] System.ObjectDisposedException: The object was used after being disposed. at System.Net.HttpListener.CheckDisposed () [0x00000] in <filename unknown>:0 at System.Net.HttpListener.EndGetContext (IAsyncResult asyncResult) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.WebSyncPreferencesWidget.<OnAuthButtonClicked>m__1 (IAsyncResult localResult) [0x00000] in <filename unknown>:0 [ERROR 21:13:19.245] Synchronization failed with the following exception: String was not recognized as a valid DateTime. at System.DateTime.Parse (System.String s, IFormatProvider provider, DateTimeStyles styles) [0x00000] in <filename unknown>:0 at System.DateTime.Parse (System.String s, IFormatProvider provider) [0x00000] in <filename unknown>:0 at System.DateTime.Parse (System.String s) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.NoteInfo.ParseJson (Hyena.Json.JsonObject jsonObj) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.UserInfo.ParseJsonNoteArray (Hyena.Json.JsonArray jsonArray) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.UserInfo.ParseJsonNotes (System.String jsonString, System.Nullable`1& latestSyncRevision) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.Api.UserInfo.GetNotes (Boolean includeContent, Int32 sinceRevision, System.Nullable`1& latestSyncRevision) [0x00000] in <filename unknown>:0 at Tomboy.WebSync.WebSyncServer.GetNoteUpdatesSince (Int32 revision) [0x00000] in <filename unknown>:0 at Tomboy.Sync.SyncManager.SynchronizationThread () [0x00000] in <filename unknown>:0 I Have also tried removing then re-adding My computer from my Ubuntu One account, but that did not help either. The only other Thing I have noticed is that under systempreferencesubuntu one services, "Notes" is not listed as a service. I don't know if this is normal or not. Thanks for any help and please let me know if anything is confusing.

    Read the article

  • Acer Aspire One 725 - missing graphic card driver?

    - by Melon
    Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with (or something similar) AMD Radeon HD 6290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: I have tried installing fglrx but I get the following error (either I don't have libraries or someone didn't make a clean build before release ;) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_MEM_AllocLinearAddrInterval’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:5: error: implicit declaration of function ‘do_mmap’ [-Werror=implicit-function-declaration] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:2124:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘kasInitExecutionLevels’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: error: ‘cpu_possible_map’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: note: each undeclared identifier is reported only once for each function it appears in /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:4159:5: warning: left-hand operand of comma expression has no effect [-Wunused-value] Update 2: After fixing the erros in compilation, ubuntu acts bizarre and unstable (no left icon panel, no upper panel, cannot run any programs, I only see desktop)

    Read the article

  • How to do this NHibernate one-to-one mapping?

    - by JMSA
    This is a problem of unidirectional one-to-one mapping in NHibernate. Student.cs public class Student { public int ID { get; set; } public int Roll { get; set; } public int RegNo { get; set; } public string Name { get; set; } public StudentDetail StudentDetail { get; set; } } StudentDetail.cs public class StudentDetail { public int ID { get; set; } public string Father { get; set; } public string Mother { get; set; } } How can I map these classes (how do the hbm mapping files look like) to the following two distinct cases of one-to-one relationships? 1st case: 2nd case:

    Read the article

  • Acer Aspire One and Kernel 2.6.35-25 Freeze

    - by Nerdfest
    I'm having a problem with an Acer Aspire One netbook after the latest kernel upgrade. Basically, doing anything relating to an external monitor locks the trackpad, and in some cases, the keyboard as well. This lock will continue in Gnome even after reboots, and requires battery removal to fix. It does work in the graphical login manager up until the problem occurs the first time. And ideas on settings, etc, that I can change to make it work again?

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >