Search Results

Search found 7024 results on 281 pages for 'usb modem'.

Page 18/281 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

  • Install windows xp from USB using the iso image

    - by buyrum
    I've got the windows xp ISO image on my computer and i want to install it on a computer without cdrom. The only way to do it is using usb flash drive. I don't know how to do it - i need to burn the iso to usb, make the usb bootable, install windows xp from the usb onto the hardrive (the usb should just replace the standard windows install disc). How to do it ?

    Read the article

  • Install windows xp from USB using the iso image

    - by buyrum
    I've got the windows xp ISO image on my computer and i want to install it on a computer without cdrom. The only way to do it is using usb flash drive. I don't know how to do it - i need to burn the iso to usb, make the usb bootable, install windows xp from the usb onto the hardrive (the usb should just replace the standard windows install disc). How to do it ?

    Read the article

  • Gigabyte GA-970A-UD3 mobo won't boot from USB flash drive

    - by user38586
    I am trying to boot BAMT a Debian flavor via USB on a brand new Gigabyte GA-970A-UD3 motherboard. I tried various flash drive and various OS. I never had this problem with ASUS and MSI. The problem is from Gigabyte hardware. I found that my BIOS is very strict about MBR compatibility. Now I can boot in DOS mode. The flash drive need to be formated as a Win98 Startup disk using HP USB disk storage format tool. Unetbootin menu is booting from USB but won't install BAMT. If I use Windows or Linux diskimager the working MBR is deleted. I tried converting BAMT .img to .iso and it is not booting with Unetbootin. Is it possible to boot BAMT(Debian Linux) from a Win98 DOS command prompt? Maybe there is a way to burn the image and keep the working MBR? If the working MBR is deleted, the flash drive is not recognized at all by the BIOS. This is the info I found that got me booting for the first time in DOS: GB's BIOS will only boot USBs formatted to FAT-32, conforming to normal MBR bootloader. I've seen this before, and surmised that the 'stick-maker' was formatting in ReiserFile, or one of the EXT 'flavors', but no one ever followed up to confirm or deny... Also, if it's putting the bootloader into its own partition - won't work! In the BIOS, on the "Integrated Peripherals" page, the "USB Storage Function" item must be enabled (which should be the default) to allow USB booting... I've put a little work into a 'GB USB booting tutorial', and frankly, I'd just go ahead and finish it up for you, but I really don't want to reboot the several times it will take me to 'firm up' procedural details, and take the BIOS/boot pictures for the post - just noticed VAIL finally went 'public beta', so will be downloading for likely twenty-six hours or so There's likely enough there to test a 'raw DOS boot', just to see if your hardware (especially the USB stick itself) will do it... Some post later: Fixed. Here is a brief summary. Since my ubuntu live usb sticks (2gb kingston and 8gb sandisk sd/usb reader - fat32, created in ubuntu 10.04) would not boot this board even though they would boot my ga-ep45-ud3p, I decided to try bilbat's suggestion with the HP usb boot program. I created the win98 boot disk on the kingston 2gb stick without reformatting. It booted right up. Next, I used windows version of unetbootin to write the ubuntu live cd to the kingston disk. This fired right up and completed the install. Everything seems to be in good order now. Unfortunately I can boot in DOS mode but can't boot BAMT.

    Read the article

  • Linksys WiFi usb dongle and linux woes

    - by MrStatic
    I have a Linksys WUSB54GC usb dongle and I have exhausted every thing I know about making this thing work in linux. I am using Fedora 13. Since it is not ready I can not view any networks. Any ideas would be great. tail of the system log Jun 2 20:14:35 localhost kernel: usb 1-7: new high speed USB device using ehci_hcd and address 8 Jun 2 20:14:35 localhost kernel: usb 1-7: New USB device found, idVendor=1737, idProduct=0077 Jun 2 20:14:35 localhost kernel: usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 2 20:14:35 localhost kernel: usb 1-7: Product: 802.11 g WLAN Jun 2 20:14:35 localhost kernel: usb 1-7: Manufacturer: Ralink Jun 2 20:14:35 localhost kernel: usb 1-7: SerialNumber: 1.0 Jun 2 20:14:35 localhost kernel: Registered led device: rt2800usb-phy3::radio Jun 2 20:14:35 localhost kernel: Registered led device: rt2800usb-phy3::assoc Jun 2 20:14:35 localhost kernel: Registered led device: rt2800usb-phy3::quality Jun 2 20:14:35 localhost NetworkManager[1367]: <info> found WiFi radio killswitch rfkill3 (at /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/ieee80211/phy3/rfkill3) (driver <unknown>) Jun 2 20:14:35 localhost kernel: rt2800usb 1-7:1.0: firmware: requesting rt2870.bin Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2800usb' ifindex: 6) Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/4 Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): now managed Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): device state change: 1 -> 2 (reason 2) Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): bringing up device. Jun 2 20:14:35 localhost kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): preparing device. Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): deactivating device (reason: 2). Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): supplicant interface state: starting -> ready Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): device state change: 2 -> 3 (reason 42) [root@localhost log]# iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg Mode:Managed Access Point: Not-Associated Tx-Power=8 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on

    Read the article

  • Problem with usb driver: ti_usb_3410_5052

    - by alschbpk
    I have problems with my USB driver. After adding my device (MSP430 USB-DEBUG-INTERFACE) it doesn't work. [ 60.476039] usb 2-2.1: new full speed USB device using uhci_hcd and address 8 [ 60.693959] ti_usb_3410_5052 2-2.1:1.0: TI USB 3410 1 port adapter converter detected [ 60.693981] ti_usb_3410_5052: probe of 2-2.1:1.0 failed with error -5 I try to do: modprobe ti_usb_3410_5052 No changes. It's Linux Linux ubuntu 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC 2011 x86_64 GNU/Linux I hope someone can help me.

    Read the article

  • unable to format usb 1204 [daemon inhibited ]

    - by santosamaru
    i try to format my usb 1st time its work all data gone but i can't save any file at this usb . then i try to check is it working or broken here the report santos@santos:~$ sudo badblocks -v /dev/sdb [sudo] password for santos: Sorry, try again. [sudo] password for santos: Checking blocks 0 to 7824383 Checking for bad blocks (read-only test): 0.00% done, 0:00 elapsed. (0/0/0 errdone Pass completed, 0 bad blocks found. (0/0/0 errors) santos@santos:~$ sudo badblocks -v -w /dev/sdb [sudo] password for santos: Sorry, try again. [sudo] password for santos: /dev/sdb is apparently in use by the system; it's not safe to run badblocks! santos@santos:~$ how to format and fix this issues? i have read this link Formatting Pen Drive causes 'Daemon Is Inhibited' Error and it said like this when i try to move any items from desktop " the destination is read only also in this case i use google and find this http://ubuntuforums.org/showthread.php?t=1955353 article as same its not helped following user13509 suggestion ..

    Read the article

  • Unable to Connect to Internet with 3G USB Dongle for Particular ISP

    - by Kush
    I'm using USB 3G Dongle for Internet. Previously I was using Tata Docomo (India) as provider, and the Internet was working fine. Now I've changed to BSNL, but I'm unable to connect to the Internet on Ubuntu. However, I've checked access point settings and other configuration which are required for BSNL, and it is working fine with same Dongle on Windows 7. Also, I'm able to connect Internet with other providers on Ubuntu, but problem persists only with Ubuntu. The access point for BSNL in my region is bsnlnet. In fact I configure the Dongle with BSNL using default Network Configuration wizard that pops up when USB Dongle is attached. When Dongle is attached and configured with BSNL, I can see network strength in Messaging menu, in Mobile Broadband category, of Ubuntu (note: my network icon still shows "not connected" status). And when I try to use the connection that I've created, it fails to connect. So far, I tried using Sakis3g script that I came up with while wandering over this issue on other forums, it didn't worked either. I also made sure that there are no special configuration made for BSNL on my Windows 7 installation, and still it is working fine there, the problem is only with Ubuntu. How can I fix it?

    Read the article

  • Show USB drives in launcher, but not mounted internal partitions

    - by Gabriel
    Well the title pretty much says it all. I have partitions that appear in the launcher when the system mounts them, just like when a USB key is plugged in. I do not want these mounted internal hard disc partitions to show as icons in the launcher, but I do want my external USB to show there when I plug it in. I've tried MyUnity - it has only an option to not show/hide all mounted devices, which is not what I want. Can this be done? From /proc/mounts (in order seen in screenshot): /dev/sdb1 /media/CEDD-DE31 vfat rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro 0 0 /dev/sda3 /media/A423-E0E8 vfat rw,nosuid,nodev,relatime,uid=1000,gid=1000,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro 0 0 /dev/sda5 /media/586C25656C253EDE fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 /dev/sda6 /home/greg/80gb ext4 rw,relatime,user_xattr,barrier=1,data=ordered 0 0 Other items from /proc/mounts not appearing in Unity launcher: /dev/sda1 /boot/efi vfat rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 0 /dev/sda9 /mnt/backup ext4 rw,relatime,user_xattr,barrier=1,data=ordered 0 0

    Read the article

  • Managing Kindle Fire with on 12.04 via Micro-USB

    - by pirtle
    To begin, I have read both Is there a way to get a Kindle Fire to work with 12.04? and How can I transfer files to a Kindle Fire with a Micro-USB cable? My problem is that I am unable to mount my Kindle Fire in order to add books to it. I have installed calibre, but it is unable to manage any devices until the computer itself has recognized it. The latter post had an excellent answer (provided by @jeremiah) that was making some progress. Unfortunately, I think I don't know enough about the -t flag used with mount. This is what I've done... Ran dmesg to locate the device: [ 3.920886] sd 6:0:0:0: [sdb] Attached SCSI removable disk Confirmed it's location: $ sudo ls -l /dev/disk/by-id lrwxrwxrwx 1 root root 9 Aug 18 15:52 usb-Amazon_Kindle_3C6C002600000001-0:0 -> ../../sdb So we know that my Kindle is recognized on /dev/sdb. I then used the mount command suggested by @jeremiah: $ sudo mount -t ext3 /dev/sdb/ /mnt/kindle/ mount: no medium found on /dev/sdb The same error occurs for sudo mount /dev/sdb /mnt/kindle. Note: I have created the 'kindle' directory in 'mnt' Any suggestions?

    Read the article

  • USB mass storage couldn't get mounted

    - by revo
    It's my android phone SD card which was indicated damaged by android yesterday night, out of the blue! I put it directly to a USB port with a USB SD card holder case, so in that way I can recover it with TestDisk, which I had experienced before on a similar situation. I also noticed that there is a change in file system and capacity: File System : RAW Capacity : 0 (unknown capacity) Also TestDisk doesn't show it on its partitions list. A 2 GB SD card is not that important in price but I've a lot of files and medias which I need them. Used a mini card reader, TestDisk displayed it on its list but a quick search and or a deep search doesn't have any results No partition found or selected for recovery and then I should quit the program. Your help is appreciated. Update #2 lsusb output: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 002: ID 04f3:0234 Elan Microelectronics Corp. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • How to get a Toshiba L505 to boot USB or CD

    - by ShroudedCloud
    OK, have a Toshiba L505 (not sure of the extended model number) that got a virus on Windows and will no longer will boot into that, so I'm trying to revive it with Ubuntu. Problem is, when I tell it to boot into a USB image of 12.04 32- or 64-bit, 13.04 64-bit, or elementary Luna 32-bit, it gives me some screen with a copyright from 2000 for Intel, invariably spits out a "media not recognized" type of error and then says PXE-ROM exiting. Well, that's annoying. So I went in with a CD (12.04 x86_64 having tried 32-bit in the past as well). Boot menu, select, starts running. Seeing the loading screen for Ubuntu, going well... until it's not. Again, invariably, it fails. The CD drive will cease spinning at around the same time each time and then the laptop will stop doing everything altogether (at least, everything spins down and it goes quiet). As far as I can tell, it's not to do with what function is being loaded from the CD at the time (because that bit is variable). I'd love to be able to boot from USB (since it will be all but required going forward), but getting the CD to work would be wondrous too. Anyone have any ideas of where I can go from here to try to fix this? My friends and I have turned up nothing.

    Read the article

  • USB Drive Warm Boot Issue. Cold boot = Perfect. Warm boot = "No boot sector found on USB device"

    - by Dan
    I'm experiencing a boot/reboot quirk similar to, yet somewhat different from others posted here. I have two Western Digital "Passport" external USB2 drives (160GB and 320GB) with Ubuntu 11.10 installed. The BIOS on my laptop is set to boot USB drives before the internal drive, and it works well. Either drive will cold-boot Ubuntu 11.10 perfectly. However, at times the computer must be restarted (warm boot) to have software updates or other changes take effect. When I warm-boot the computer, the computer goes through its normal shutdown/restart, then the usual BIOS tests, at which time the USB drive is selected momentarily (as normal), and that's when the trouble starts. I get a "No boot sector found on USB device", and the computer proceeds to boot Windows from the internal drive. If I press F12 early during the restart sequence (allows manual selection of the boot sequence), USB is still shown before the internal drive on the sequence list (as it should be). If I highlight "USB" and press ENTER, I still get a "No boot sector..." error message, but the external USB drive then proceeds to boot Ubuntu normally. I have a third external USB drive (Western Digital 160 GB Media Center) that cold-boots and warm-boots perfectly, so I know everything in the computer is set up properly. It also tells me Ubuntu is set up correctly on the drives, as all three drives were done identically, and at the same time. I've tried formatting the Passport drives NTFS and FAT32, but it didn't change anything. If I power-down the computer, then start it up again, it will boot Ubuntu from either of the Passport drives perfectly - every time. It's as if during a warm boot the Passport drives are somehow looking for the boot loader in the wrong location on the drive - yet either drives works when booting from a cold start. Not a show-stopper .. but frustrating. Computer is a Dell XPS M1530, A12 BIOS (latest), but I don't think the computer plays into the issue because one of the three drives works at all times. It's only the two WD Passport models at issue here. Thanks!

    Read the article

  • Running Ubuntu Server from a USB key / thumb drive (being mindful of flash's write limitations)

    - by andybjackson
    Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and a ZFS RAID-Z array for data. I settled on this configuration after trying and regretfully rejecting FreeNAS because the Logitech Media Server (LMS) software isn't available on the AMD64 flavour of this platform and because I think Debian/Ubuntu server is a better future-proof platform. I considered Open Media Vault, but concluded that it isn't quite yet ready for my purposes. That said, FreeNAS does include the option to run itself off a 2GB+ flash device like USB key or thumb drive. Apparently FreeNAS is mindful of the write limitations of flash devices and so creates virtual disks for running the OS, writing only the required configuration information back to flash. This would give me an extra data drive slot. Q: Can Ubuntu Server be configured sensibly to run off a flash device such as a USB key/thumb drive? If so, how? The write limitations of flash should be accounted for.

    Read the article

  • Unable to detect windows hard drive while running Ubuntu 12.04 from USB

    - by eapen jacob
    I am completely new to Ubuntu. I experimented with Ubuntu 12.04 by running it from a USB drive, in-order to recover files from my hard disc. History: My laptop is an IBM R60 running windows 7. Suddenly it gave me an error stating "error 2100 - Hard drive initialization error". I have read all the forums and most of them suggested that I remove and replace my HDD and that did not work. And one site suggested to try using Ubuntu to recover files. I booted my system from USB, and once Ubuntu came up, I choose "Try Ubuntu". It came up fine and I was able to surf ,and do other things, etc. I was unable to to access my files which are on the hard disc and "Attached Devices" is grayed out. 1- Is there any way to gain access to my hard disc to recover the files? How do I navigate to search for my files. 2- Is it just simply not possible if the hard disc themselves are not working? Is that why I`m unable to find the drives. I know its a very novice question, but hoping someone would help me out. Thank you, Eapen

    Read the article

  • ubuntu boots only with usb

    - by klimat
    Just installed Ubuntu 11.04. But it boots only from usb. Seems like I didn't pay attention during selecting boot device. sudo fdisk -l [sudo] password for klim: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000177e1 Device Boot Start End Blocks Id System /dev/sda1 1 60045 482302976 83 Linux /dev/sda2 60045 60802 6080513 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 60045 60802 6080512 82 Linux swap / Solaris Disk /dev/sdb: 4004 MB, 4004511744 bytes 124 heads, 62 sectors/track, 1017 cylinders Units = cylinders of 7688 * 512 = 3936256 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000eee1a Device Boot Start End Blocks Id System /dev/sdb1 * 1 1017 3909317 b W95 FAT32 grub updating or another "grub" operations don't work as I've tried. Can I just copy whole boot folder from usb to HD or smth like that? Any kind of help is appreciated. Apologize for my newbie skills.

    Read the article

  • USB Keyboard works occasionally

    - by palimmo
    A few days ago I bought a SL640 Hama USB keyboard to use on my laptop with Ubuntu 12.04. But I'm having problems, as it works one time out of 10! While on my girlfriend's laptop, with Win Vista, always works. And on my laptop I have Win7 in dual boot. And I have to say that it always works on it. Here are some infos: ~$ lsusb Bus 006 Device 003: ID 04d9:1503 Holtek Semiconductor, Inc. Shortboard Lefty As you can see, the OS recognized it but the keyboard doesn't react ... even the Caps Lock and Num Lock keys don't blink. Regarding the legacy support (useful for GRUB), I have found no entry in the BIOS. But I'm not interested in it. I just want to use it in Ubuntu. However, in GRUB it works sometimes. Surprisingly, now I have booted my laptop: the usb keyboard hasn't worked in GRUB but it has worked since the ubuntu login! And now I'm typing with it. Well.. it means that Ubuntu has the right drivers and they work. But how to "load" them always correctly? thanks in advance!

    Read the article

  • Why wont Ubuntu recognize Rogers LTE Rocket stick 330U Sierra wireless modem?

    - by rob lawson
    I tried to plug the rocket stick into the USB slot, and Ubuntu does not recognize that there is anything in the drive. I plug in a standard USB thumbdrive and it is recognized right away. Are there any applications to help me open the rogers folders to see the files, and maybe connect to the Internet using said rocket stick 330U? I've been searching for this answer for almost a week now, seems no one knows how to get the net using this piece of technology.

    Read the article

  • How to configure LAN IP Filter on Huawei E586 UMTS Modem

    - by Mose
    I need to prevent clients of an Huawei E586 UMTS to WiFi modem from downloading much data from specific servers eg. Windows update or OSX update. On the config page of the device there's an "LAN IP Filter" which seems pretty good but I can't figure out the right settings. The mask looks like this: The help pages states the following: My problem with this is, I want some wildcard for the local ip and port. In my opinion the help page can not be correct by "lan port: enter 80" because the source port is normally dynamic. I tried to set it up like stated there but as expected it doesn't work. As wildcards I tried * and "ALL" but nothing worked as it prevents me from saving settings with an "wrong value" error. Any suggestions? Thanks in advance!

    Read the article

  • Wireless bridge between two prolink adsl modem/router

    - by MyName
    Allright, so i've got 2 prolink hurricane h5004n. Its a broadband adsl modem and router. My Pc is connected to the first one via ethernet. What i want to do is a wireless bridge to make the 2 routers "talk". I've tried hooking up the dsl cable (as they are modems) in both to try but when one disconnects as the other connects. I don't really know about the configurations to be done of all the DCHP or RIP and NAT forwarding stuffs. (i'm just writing what i saw) In short i want the second router to act as a wifi repeater but i don't see any repeater option and i also do not want to connect them via ethernet. So is it possible to do something? Apart from buying another repeater i don't want to spend anymore i'm done :S

    Read the article

  • How to make phone calls using a pc, modem, headphone and no actual phone instrument

    - by user18151
    Hi, I have a phone landline connection and I DO NOT have a phone instrument. I connect the cable into my laptop, and want to make calls using my laptop. I have an HDA CX20561 modem. I seem to be able to dial number using dialer.exe, though nothing seems to happen. From Microsoft kb http://support.microsoft.com/kb/958143, it looks like dialer.exe alone is not enough for the call. Can somebody tell me how to make and receive phone call with whatever hardware I have, i.e. what software will I need. Thanks.

    Read the article

  • Will the netinstall (minimal) work with a USB cellular modem?

    - by Z9iT
    Installing Ubuntu minimal is extremely easy when the system has a LAN card and connected to internet via Cable & Router... I Recently came across a situation where I needed to install Ubuntu Minimal on a system which wash not having a LAN card and cable internet anywhere around... The only access to the internet was through a USB Plug n Play Data-Card Modem. May anyone suggest something so that I may install Ubuntu Minimal using USB Modem as the only source of Internet, if it's possible at all?? (This relates to Ubuntu 12.04 in specific)

    Read the article

  • How do I make a USB RS232 dongle show up in /dev/ttyUSB* ?

    - by mtrw
    I have a couple of FTDI based USB to Rs232 serial dongles. Sometimes when I plug them into my Ubuntu 10.04 laptop, they show up as /dev/ttyUSB0 and /dev/ttyUSB1, which is what I want to have happen. But sometimes they don't. When they don't, sometimes rebooting fixes the problem and sometimes it doesn't. They always show up in lsusb hanging off of Bus 5: Bus 005 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Bus 005 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub I can see them if I do ls /dev/bus/usb/005 as 002 and 003. But if I pass /dev/bus/usb/005/002 to pyserial, which is what I'm using to access /dev/ttyUSBx, I get SerialException("Could not open port: [Errno 13] Permission denied: '/dev/bus/usb/005/002'",).

    Read the article

  • Hardware question; booting ubuntu off of USB flash drive?

    - by Kon
    I'm currently running ubuntu off of a USB 3.0 flash drive on my laptop, and I have another USB 3.0 flash drive I use for storing larger files that I need to access and whatnot. But the issue is that both of the usb 3.0 flash drives don't fit next to each other at all, so I'm forced to use another usb 2.0 port located in a different spot on my laptop. Now my question is that if I use a USB 3.0 hub will that slow my connections down at all? or cause some sort of interference? Another question I had which I was unable to find anywhere on the internet is if there was a USB 3.0 hub with more than one upstream connection? Thanks for your time!

    Read the article

  • 56.6 Modem with CallerID

    - by Fuod
    Does anyone still know anything about the 56.6 modems? I'm looking for one that is easy to access via C#/VB.Net, has Caller ID and is either low-profile or USB. Also that neat little feature that lets the modem block the call from the phone (pass-through) until it has received the CallerID info would be really nice! Obviously I could just go to Best Buy and get what they have but I have no way of knowing how friendly it would be to write code for and I don't want to make multiple trips returning/exchanging etc. I'm not going to be doing anything with voice or voice mail, just recording the number from CallerID. Thanks!

    Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >