Search Results

Search found 5554 results on 223 pages for 'attribute'.

Page 180/223 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

• Vertical-Align: A Full Explanation

  - by Livvy Jeffs

  I've been struggling with vertical alignments, a seemingly simple enough process that has a lot of idiosyncrasies throughout different languages and element types. I've done a lot of reading through stackexchange and can't seem to find a common thread of understanding. Here are the rules that I have been able to gather: 1) Vertical-align does not work in <\div>s, you have to set div {display: table-cell; vertical-align: middle} This seems like a big hassle, especially since table-cells override the height limitation even when overflow is set to hidden and expands to fit content, which means the vertical "center" is variable. I just read some source-code from Pinterest where button {vertical-align: middle}, but no other vertical-align commands seem to work. It seems as if button is by default aligned in the middle. Can someone provide a clear explanation for the vertical-align attribute? What html elements respond to vertical-align? Which html elements have default vertical-align attributes? Which html elements have non-overridable vertical-align attributes? And any clues as to understanding the idiosyncracies would help as well! Thanks in advance!

  Read the article

• How to disable auto-generated WCF configuration

  - by user351025

  Every time my program runs vs adds the default configuration to my app.config file. At that run it works fine, but at the next run it actually tries to read the config. The problem is that the default configuration has errors, it adds the attribute "Address", but attritbutes are not allowed to have capitals so it throws an exception. This means I have to remove the bad section every run! I've tried to configure the .config but it gives errors. Here is the code that I use to host the server: private static System.Threading.AutoResetEvent stopFlag = new System.Threading.AutoResetEvent(false); ServiceHost host = new ServiceHost(typeof(Service), new Uri("http://localhost:8000")); host.AddServiceEndpoint(typeof(IService), new BasicHttpBinding(), "ChessServer"); host.Open(); stopFlag.WaitOne(); host.Close(); Here is the client code that calls the server: ChannelFactory<IChessServer> scf; scf = new ChannelFactory<IService> (new BasicHttpBinding(), "http://localhost:8000"); IService service = scf.CreateChannel(); Thanks for any help.

  Read the article

• Generating a static website from a set of content data (possibly with webgen, webby or a similar too

  - by Darel

  My company (an engineering firm) is looking to redesign their website with some dynamic content. We have a nice portfolio of projects that we'd like to present on our site by category. To elaborate, I'd like to have a "Projects Category" menu, where you can choose a sub-project category (such as churches, schools, etc) which links to a page with images of all projects which have been tagged with that category attribute. Clicking on an image would then take you to a detailed page for that project. I have done a good bit of asp and jsp page development, but I've always worked on the front end in an enterprise environment - I've never built a production site from the back end. The advice I've gotten so far is that a full-blown CMS solution would be somewhat overkill, as we won't have a large hit count, and we'll be displaying a few hundred projects at most. One big-picture choice I appear to have - whether to dynamically generate the pages (with asp or jsp) or to use a tool to generate a set of static html pages. The tool would build the menus, project summary pages, and individual project pages based on a set of data I could provide (in the form of a database or text file.) I'm leaning towards trying to use a tool like webgen or webby to statically generate the site due to our current web hosting situation. Any thoughts on which approach is more appropriate? Is webgen or webby capable of doing what I am trying to do? Or can anyone recommend other web authoring tools better equipped to accomplish this? Thanks for any feedback!

  Read the article

• svcutil, XmlSerializer and xsd:list

  - by Dmitry Ornatsky

  I'm using svcutil to generate classes from service metadata. This XML schema <xsd:complexType name="FindRequest"> ... <xsd:attribute name="Significance" type="Significance" use="optional" /> </xsd:complexType> <xsd:simpleType name="Significance"> <xsd:list> <xsd:simpleType> <xsd:restriction base="xsd:int"> <xsd:enumeration value="1" /> <xsd:enumeration value="2" /> <xsd:enumeration value="3" /> </xsd:restriction> </xsd:simpleType> </xsd:list> produces following code: public partial class FindRequest { ... private int significanceField; private bool significanceFieldSpecified; [System.Xml.Serialization.XmlAttributeAttribute()] public int Significance { get { return this.significanceField; } set { this.significanceField = value; } } [System.Xml.Serialization.XmlIgnoreAttribute()] public bool SignificanceSpecified { get { return this.significanceFieldSpecified; } set { this.significanceFieldSpecified = value; } } } My questions are: Is it possible to make XmlSerializer understand this type of list: <FindRequest Significance="1 2 3"/> For example by using some kind of a flags-style enum: public enum EmployeeStatus { [XmlEnum(Name = "1")] One = 1, [XmlEnum(Name = "2")] Two = 2, [XmlEnum(Name = "3")] Three = 4 } If the answer is yes, Is it possible to make svcutil/xsd.exe generate classes that are serialized that way without changing the schema?

  Read the article

• How to invalidate the OutputCache in a webfarm?

  - by Pure.Krome

  Hi folks, i've got a website that uses OutputCache attribute to cache pages. Works great. Now, I'm in the middle of R&D'ing scaling up this site to be in a web farm. Along with the usual suspects for webfarm pain ... I've noticed (pretty quickly/obviously) that the OutputCache from Server_A doesn't invalidate the OutputCache from Server_B .. if a try and invalidate a single server's OutputCache. This makes total sense - how can S_A 'tell' S_B to invalidate when they are physically 2 seperate machines, etc? So - what are our options? Velocity? I understand this will move the caching to a different layer .. which means that the final result (output) will always be required to be determined .. as opposed to the OutputCache whic remembers the final output content (yes, varby gives different versions, etc.. which is totally fine). So even though the poco or business objects are all sync'd, there's still that last rendering effort required (even if it's tiny .. compared to the effort to generate/sync business objects). So yeah .. not sure of the options here and what other people do?

  Read the article

• Adding a font for use in ReportLab

  - by Jimmy McCarthy

  I'm trying to add a font to the python ReportLab so that I can use it for a function. The function is using canvas.Canvas to draw a bunch of text in a PDF, nothing complicated, but I need to add a fixed width font for layout issues. When I tried to register a font using what little info I could find, that seemed to work. But when I tried to call .addFont('fontname') from my Canvas object I keep getting "PDFDocument instance has no attribute 'addFont'" Is the function just not implemented? How do I get access to fonts other than the 10 or so default ones that are listed in .getAvailableFonts? Thanks. Some example code of what I'm trying to make happen: from reportlab.pdfgen import canvas c = canvas.Canvas('label.pdf') c.addFont('TestFont') #This throws the error listed above, regardless of what argument I use (whether it refers to a font or not). c.drawString(1,1,'test data here') c.showPage() c.save() To register the font, I tried from reportlab.lib.fonts import addMapping from reportlab.pdfbase import pdfmetrics pdfmetrics.registerFont(TTFont('TestFont', 'ghettomarquee.ttf')) addMapping('TestFont', 0, 0, 'TestFont') where 'ghettomarquee.ttf' was just a random font I had lying around.

  Read the article

• Variable field in a constraint annotation

  - by Javi

  Hello, I need to create a custom constraint annotation which can access the value of another field of my bean. I'll use this annotation to validate the field because it depends on the value of the other but the way I define it the compiler says "The value for annotation attribute" of my field "must be a constant expression". I've defined it in this way: @Target(ElementType.FIELD) @Retention(RetentionPolicy.RUNTIME) @Constraint(validatedBy=EqualsFieldValidator.class) @Documented public @interface EqualsField { public String field(); String message() default "{com.myCom.annotations.EqualsField.message}"; Class<?>[] groups() default {}; Class<? extends Payload>[] payload() default {}; } public class EqualsFieldValidator implements ConstraintValidator<EqualsField, String>{ private EqualsField equalsField; @Override public void initialize(EqualsField equalsField) { this.equalsField = equalsField; } @Override public boolean isValid(String thisField, ConstraintValidatorContext arg1) { //my validation } } and in my bean I want something like this: public class MyBean{ private String field1; @EqualsField(field=field1) private String field2; } Is there any way to define the annotation so the field value can be a variable? Thanks

  Read the article

• Putting CAPTCHAs on their own page?

  - by mnemosyn

  We need to put a captcha image on our ASP.NET MVC 2 based website. We chose reCaptcha and built it in using the way described by Derik Whittaker. The idea there is baiscally to build some abstractions and all you need to do is decorate your Controller with a [ValidateCaptcha] attribute. This works all fine. However, we have a lot of form-widgets in different pages and I don't want to have the captcha floating around everywhere. So I'd like to implement it the way StackOverflow does: Submit a Form -> Challenge Captcha -> Submit Captcha -> Perform Action on original form data. Now, how do I redirect the user to the captcha page while keeping the originally submitted information? I thought of some very ugly hacks (hidden fields w/ base64 encoded form data, etc.) but I think I'm missing something obvious. On the other hand, this sounds as if I wanted to do something in a stateful manner, and I shouldn't?

  Read the article

• postgresql table for storing automation test results

  - by Martin

  I am building an automation test suite which is running on multiple machines, all reporting their status to a postgresql database. We will run a number of automated tests for which we will store the following information: test ID (a GUID) test name test description status (running, done, waiting to be run) progress (%) start time of test end time of test test result latest screenshot of the running test (updated every 30 seconds) The number of tests isn't huge (say a few thousands) and each machine (say, 50 of them) have a service which checks the database and figures out if it's time to start a new automated test on that machine. How should I organize my SQL table to store all the information? Is a single table with a column per attribute the way to go? If in the future I need to add attributes but want to keep compatibility with old database format (ie I may not want to delete and create a new table with more columns), how should I proceed? Should the new attributes just be in a different table? I'm also thinking of replicating the database. In case of failure, I don't mind if the latest screenshots aren't backed up on the slave database. Should I just store the screenshots in its own table to simplify the replication? Thanks!

  Read the article

• How can I include additional markup within a 'Content' inner property within an ASP.Net WebControl?

  - by GenericTypeTea

  I've searched the site and I cannot find a solution for my problem, so apologies if it's already been answered (I'm sure someone must have asked this before). I have written a jQuery Popup window that I've packaged up as a WebControl and IScriptControl. The last step is to be able to write the markup within the tags of my control. I've used the InnerProperty attribute a few times, but only for including lists of strongly typed classes. Here's my property on the WebControl: [PersistenceMode(PersistenceMode.InnerProperty)] [DesignerSerializationVisibility(DesignerSerializationVisibility.Content)] public something??? Content { get { if (_content == null) { _content = new something???(); } return _content; } } private something??? _content; Here's the HTML Markup of what I'm after: <ctr:WebPopup runat="server" ID="win_Test" Hidden="false" Width="100px" Height="100px" Modal="true" WindowCaption="Test Window" CssClass="window"> <Content> <div style="display:none;"> <asp:Button runat="server" ID="Button1" OnClick="Button1_Click" /> </div> <%--Etc--%> <%--Etc--%> </Content> </ctr:WebPopup> Unfortunately I don't know what type my Content property should be. I basically need to replicate the UpdatePanel's ContentTemplate. EDIT: So the following allows a Template container to be automatically created, but no controls show up, what's wrong with what I'm doing? [PersistenceMode(PersistenceMode.InnerProperty)] [DesignerSerializationVisibility(DesignerSerializationVisibility.Content)] public ITemplate Content { get { return _content; } set { _content = value; } } private ITemplate _content;

  Read the article

• How can I filter these Django records?

  - by mipadi

  I have a set of Django models as shown in the following diagram (the names of the reverse relationships are shown in the yellow bubbles): In each relationship, a Person may have 0 or more of the items. Additionally, the slug field is (unfortunately) not unique; multiple Person records may have the same slug fields. Essentially these records are duplicates. I want to obtain a list of all records that meet the following criteria: All duplicate records (that is, having the same slug) with at least one Entry OR at least one Audio OR at least one Episode OR at least one Article. So far, I have the following query: Person.objects.values('slug').annotate(num_records=Count('slug')).filter(num_records__gt=1) This groups all records by slug, then adds a num_records attribute that says how many records have that slug, but the additional filtering is not performed (and I don't even know if this would work right anyway, since, given a set of duplicate records, one may have, e.g., and Entry and the other may have an Article). In a nutshell, I want to find all duplicate records and collapse them, along with their associated models, into one record. What's the best way to do this with Django?

  Read the article

• Unity to dispose of object

  - by Johan Levin

  Is there a way to make Unit dispose property-injected objects as part of the Teardown? The background is that I am working on an application that uses ASP.NET MVC 2, Unity and WCF. We have written our own MVC controller factory that uses unity to instantiate the controller and WCF proxies are injected using the [Dependency] attribute on public properties of the controller. At the end of the page life cycle the ReleaseController method of the controller factory is called and we call IUnityContainer.Teardown(theMvcController). At that point the controller is disposed as expected but I also need to dispose the injected wcf-proxies. (Actually I need to call Close and/or Abort on them and not Dispose but that is a later problem.) I could of course override the controllers' Dispose methods and clean up the proxies there, but I don't want the controllers to have to know about the lifecycles of the injected interfaces or even that they refer to WCF proxies. If I need to write code myself for this - what would be the best extension point? I'd appreciate any pointer.

  Read the article

• jQuery + Jeditable - detect when select is changed

  - by Bryan Roth

  I'm using Jeditable for in-place editing. One the controls I am working with has the select type. When a user clicks on the field, the following select control is generated: <div id="status" class="editable_select"> <form> <select name="value"> <option value="Active">Active</option> <option value="Inactive">Inactive</option> </select> <button type="submit">Save</button> <button type="cancel">Cancel</button> </form> </div> What I am trying to figure out is how to use jQuery to detect when that select control is changed, especially since it doesn't have an ID attribute. This is what I have so far, but the event is not getting triggered: $(document).ready(function () { $('#status select').change(function () { alert("Change Event Triggered On:" + $(this).attr("value")); }); });

  Read the article

• Deploying .NET COM dll, getting error (0x80070002)

  - by Brett

  I have a .NET COM assembly I am attempting to deploy to a web server (IIS 6 Win 2003). We have successfully deployed this assembly to our test environment, but the production environment is not working. The assembly is being called from a classic ASP page. Every time that page tries to initialize the assembly with “Set LTMRender = CreateObject("LTMRender.Render")”, I get an error “Error Type:, (0x80070002)”. This error seems to indicate a permission denied, or file not found type problem. I created a test app to see if the assembly works outside of the web page. The .exe initializes the assembly, and then makes a call designed to fail which in turn causes the assembly to produce a log file. It works if I run the .exe in the same folder as the assembly, but fails if I run it elsewhere. For some reason, the assembly is not accessible from outside it’s folder. I can’t figure out why this won’t work. Things I have confirmed: The deployment folder has adequate permissions. We have confirmed that the folder the assembly in installed in has the correct permissions for all the necessary user accounts. The Assembly is signed with a strong name, and was registered with regasm.exe C:_WebSites\LTMRender\LTMRender.dll /codebase /tlb:C:_WebSites\LTMRender\LTMRender.tlb. Regasm reported success. The Assembly has the attribute and relevant GUID’s set correctly. Any tips? EDIT We ran filemon against my testapp.exe and it seems to have indicated what the problem is. When testapp.exe runs in D:_websites\DocWebV2\ or D:_websites\DocWebV2\ LTMRender\ folder, it succeeds and filemon is showing D:_websites\DocWebV2\LTMRender\pinPDF.dll SUCCESS If I run my testapp.exe in the D:_websites\DocWebV2\Client – where my asp pages run, it shows D:_websites\DocWebV2\pinPDF.dll NAME NOT FOUND and then D:_websites\DocWebV2\pinPDF\pinPDF.dll FILE NOT FOUND I’m not sure why it is not looking in the correct folder if it’s under this particular folder only.

  Read the article

• ASP.NET MVC 2: How to write this Linq SQL as a Dynamic Query (using strings)?

  - by Dr. Zim

  Skip to the "specific question" as needed. Some background: The scenario: I have a set of products with a "drill down" filter (Query Object) populated with DDLs. Each progressive DDL selection will further limit the product list as well as what options are left for the DDLs. For example, selecting a hammer out of tools limits the Product Sizes to only show hammer sizes. Current setup: I created a query object, sent it to a repository, and fed each option to a SQL "table valued function" where null values represent "get all products". I consider this a good effort, but far from DDD acceptable. I want to avoid any "programming" in SQL, hopefully doing everything with a repository. Comments on this topic would be appreciated. Specific question: How would I rewrite this query as a Dynamic Query? A link to something like 101 Linq Examples would be fantastic, but with a Dynamic Query scope. I really want to pass to this method the field in quotes "" for which I want a list of options and how many products have that option. (from p in db.Products group p by p.ProductSize into g select new Category { PropertyType = g.Key, Count = g.Count() }).Distinct(); Each DDL option will have "The selection (21)" where the (21) is the quantity of products that have that attribute. Upon selecting an option, all other remaining DDLs will update with the remaining options and counts.

  Read the article

• T4MVC not generating an action

  - by Maslow

  I suspected there was some hidden magic somewhere that stopped what looks like actual method calls all over the place in T4MVC. Then I had a view fail to compile, and the stackTrace went into my actual method. [Authorize] public string Apply(string shortName) { if (shortName.IsNullOrEmpty()) return "Failed alliance name was not transmitted"; if (Request.IsAuthenticated == false || User == null || User.Identity == null) return "Apply authentication failed"; Models.Persistence.AlliancePersistance.Apply(User.Identity.Name, shortName); return "Applied"; } So this method isn't generating in the template after all. <%=Ajax.ActionLink("Apply", "Apply", new RouteValueDictionary() { { "shortName", item.Shortname } }, new AjaxOptions() { UpdateTargetId = "masterstatus" })%> <%=Html.ActionLink("Apply",MVC.Alliance.Apply(item.Shortname),new AjaxOptions() { UpdateTargetId = "masterstatus" }) %> The second method threw an exception on compile because the method Apply in my controller has an [Authorize] attribute so that if someone that isn't logged on clicks this, they get redirected to login, then right back to this page. There they can click on apply again, this time being logged in. And yes I realize one is Ajax.ActionLink while the other is Html.ActionLink I did try them both with the T4MVC version.

  Read the article

• Where to put data management rules for complex data validation in ASP.NET MVC?

  - by TheRHCP

  Hello, I am currently working on an ASP.NET MVC2 project. This is the first time I am working on a real MVC web application. The ASP.NET MVC website really helped me to get started really fast, but I still have some obscure knowledge concerning datamodel validation. My problem is that I do not really know where to manage my filled datamodel when it comes to complex validation rules. For example, validating a string field with a Regex is quite easy and I know that I just have to decorate my field with a specific attribute, so data management rules are implemented in the model. But if I have multiple fields that I need to validate which each other, for example multiple datetime that need to be correctly set following a specific time rule, where do I need to validate them? I know that I could create my own validation attributes, but sometimes validation ask a specific validation path which is to complex to be validated using attributes. This first question also leads me to a related question which is, is it right to validate a model in the controller? Because for the moment that is the only way I found for complex validation. But I find this a bit dirty and I feel it does not really fit a the controller role and much harder to test (multiple code path). Thanks.

  Read the article

• How to write an XSLT to transform following XML in the following HTML?

  - by Taz

  Hi I have an XML as below <result> <binding name="PropertyURI"> <uri>http://dbpedia.org/ontology/motto</uri> </binding> <binding name="Property"> <literal xml:lang="en">motto</literal> </binding> <binding name="ValueURI"> <uri>http://dbpedia.org/ontology/motto</uri> </binding> <binding name="Value"> <literal>Ittehad, Tanzim, Yaqeen-e-Muhkam(Urdu)</literal> </binding> </result> I want to transform it like <a href=PropertyURI>Property</a> <a href=ValueURI>Value</a> Problem is that number of binding tags can different. Sometimes we may have only URIs or ony Values. How can I know in XSLT that if binding with @name=PropertyURI is available. If yes then what is the name of next binding @name attribute?

  Read the article

• overflow-y hides page contents in a webkit browsers (Chrome and Safari)

  - by Victor F

  Hi, I am currently making our website to be supported by all major browsers and I've met a very strange problem - oveflow-y attribute caused my data to be hidden. Below I've got an oversimplified code sample that works in IE and Firfox, but which doesn't work in Safari and Chrome. This is a 100% valid code and I am not sure why it doesn't display properly in webkit browsers. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title></title> </head> <body style="height: 100%;"> <form action="Webkit_Problem.html" style="height: 100%;"> <table style="height: 100%;> <tr> <td> <div style="overflow-y: auto; height: 100%;> THIS SHOULD BE VISIBLE </div> </td> </tr> </table> </form> </body> </html> http://www.alocet.com/VictorsTestFolder/Webkit_Problem.html (Live sample here) The only way to get it working is either remove the height:100% attributes for div or a table tag (which will ruin the purpose of my html), or add height:100% to html tag Does anyone has any suggestions? Thank you

  Read the article

• Deserializing a FileStream on Client using WCF

  - by Grandpappy

  I'm very new to WCF, so I apologize in advance if I misstate something. This is using .NET 4.0 RC1. Using WCF, I am trying to deserialize a response from the server. The base response has a Stream as its only MessageBodyMember. public abstract class StreamedResponse { [MessageBodyMember] public Stream Stream { get; set; } public StreamedResponse() { this.Stream = Stream.Null; } } The derived versions of this class are actually what's serialized, but they don't have a MessageBodyMember attribute (they have other base types such as int, string, etc listed as MessageHeader values). [MessageContract] public class ChildResponse : StreamedResponse { [DataMember] [MessageHeader] public Guid ID { get; set; } [DataMember] [MessageHeader] public string FileName { get; set; } [DataMember] [MessageHeader] public long FileSize { get; set; } public ChildResponse() : base() { } } The Stream is always a FileStream, in my specific case (but may not always be). At first, WCF said FileStream was not a known type, so I added it to the list of known types and now it serializes. It also appears, at first glance, to deserialize it on the client's side (it's the FileStream type). The problem is that it doesn't seem to be usable. All the CanRead, CanWrite, etc are false, and the Length, Position, etc properties throw exceptions when being used. Same with ReadByte(). What am I missing that would keep me from getting a valid FileStream?

  Read the article

• i m trying to return list<object> from webmethod but gives error

  - by girish

  System.InvalidOperationException: There was an error generating the XML document. --- System.InvalidOperationException: The type WebService.Property.Property_Users was not expected. Use the XmlInclude or SoapInclude attribute to specify types that are not known statically. at System.Xml.Serialization.XmlSerializationWriter.WriteTypedPrimitive(String name, String ns, Object o, Boolean xsiType) at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriter1.Write1_Object(String n, String ns, Object o, Boolean isNullable, Boolean needType) at Microsoft.Xml.Serialization.GeneratedAssembly.XmlSerializationWriter1.Write8_ArrayOfAnyType(Object o) at Microsoft.Xml.Serialization.GeneratedAssembly.ListOfObjectSerializer.Serialize(Object objectToSerialize, XmlSerializationWriter writer) at System.Xml.Serialization.XmlSerializer.Serialize(XmlWriter xmlWriter, Object o, XmlSerializerNamespaces namespaces, String encodingStyle, String id) --- End of inner exception stack trace --- at System.Xml.Serialization.XmlSerializer.Serialize(XmlWriter xmlWriter, Object o, XmlSerializerNamespaces namespaces, String encodingStyle, String id) at System.Xml.Serialization.XmlSerializer.Serialize(TextWriter textWriter, Object o, XmlSerializerNamespaces namespaces) at System.Xml.Serialization.XmlSerializer.Serialize(TextWriter textWriter, Object o) at System.Web.Services.Protocols.XmlReturnWriter.Write(HttpResponse response, Stream outputStream, Object returnValue) at System.Web.Services.Protocols.HttpServerProtocol.WriteReturns(Object[] returnValues, Stream outputStream) at System.Web.Services.Protocols.WebServiceHandler.WriteReturns(Object[] returnValues) at System.Web.Services.Protocols.WebServiceHandler.Invoke() public List<object> GetDataByModuleName(string ModuleName) { List<Property_Users> obj_UserList = new List<Property_Users>(); // performing some operation that add data to obj_UserList List < Object > myList = new List<object>(); return ConvertToObjectList<Property_Users>(obj_UserList); } public List<Object> ConvertToObjectList<N>(List<N> sourceList) { List<Object> result = new List<Object>(); foreach (N item in sourceList) { result.Add(item as Object); } return result; } [WebMethod] public List<object> GetDataByModuleName(string ModuleName) { List<object> obj_list = new List<object>(); obj_list = BAL_GeneralService.GetDataByModuleName(ModuleName); return obj_list; }

  Read the article

• Multithreaded IOCP Client Issue

  - by Carl

  I am writing a multithreaded client that uses an IO Completion Port. I create and connect the socket that has the WSA_FLAG_OVERLAPPED attribute set. if ((m_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP)) == INVALID_SOCKET) { throw std::exception("Failed to create socket."); } if (WSAConnectByName(m_socket, L"server.com", L"80", &localAddressLength, reinterpret_cast<sockaddr*>(&localAddress), &remoteAddressLength, &remoteAddress, NULL, NULL) == FALSE) { throw std::exception("Failed to connect."); } I associate the IO Completion Port with the socket. if ((m_hIOCP = CreateIoCompletionPort(reinterpret_cast<HANDLE>(m_socket), m_hIOCP, NULL, 8)) == NULL) { throw std::exception("Failed to create IOCP object."); } All appears to go well until I try to send some data over the socket. SocketData* socketData = new SocketData; socketData->hEvent = 0; DWORD bytesSent = 0; if (WSASend(m_socket, socketData->SetBuffer(socketData->GenerateLoginRequestHeader()), 1, &bytesSent, NULL, reinterpret_cast<OVERLAPPED*>(socketData), NULL) == SOCKET_ERROR && WSAGetLastError() != WSA_IO_PENDING) { throw std::exception("Failed to send data."); } Instead of returning SOCKET_ERROR with the last error set to WSA_IO_PENDING, WSASend returns immediately. I need the IO to pend and for it's completion to be handled in my thread function which is also my worker thread. unsigned int __stdcall MyClass::WorkerThread(void* lpThis) { } I've done this before but I don't know what is going wrong in this case, I'd greatly appreciate any efforts in helping me fix this problem.

  Read the article

• problem with RenderOuterTable property for .net 4.0 controls

  - by Mario

  According to the new 4.0 framework overview, one should be able to add the attrib RenderOuterTable="false" to a control that supports the attribute and see css friendly code be spit out - in other words no html tables. To test this, I threw a login control into a basic fresh webpage with the following code: <asp:Login ID="Login1" runat="server" RenderOuterTable="false"></asp:Login> The result? Crappy html table output, which supposedly doesn't happen with this attrib set to false. Here is the output: &lt;table cellpadding=&quot;0&quot;&gt; <tr> <td align="center" colspan="2">Log In</td> </tr><tr> <td align="right"><label for="MainContent_Login1_UserName">User Name:</label></td><td><input name="ctl00$MainContent$Login1$UserName" type="text" id="MainContent_Login1_UserName" /><span id="MainContent_Login1_UserNameRequired" title="User Name is required." style="visibility:hidden;">*</span></td>... Hopefully you get the point. Anyone know how to stop these controls from outputting tables? This is super annoying.

  Read the article

• Python Django Global Variables

  - by Joe J

  Hi all, I'm looking for simple but recommended way in Django to store a variable in memory only. When Apache restarts or the Django development server restarts, the variable is reset back to 0. More specifically, I want to count how many times a particular action takes place on each model instance (database record), but for performance reasons, I don't want to store these counts in the database. I don't care if the counts disappear after a server restart. But as long as the server is up, I want these counts to be consistent between the Django shell and the web interface, and I want to be able to return how many times the action has taken place on each model instance. I don't want the variables to be associated with a user or session because I might want to return these counts without being logged in (and I want the counts to be consistent no matter what user is logged in). Am I describing a global variable? If so, how do I use one in Django? I've noticed the files like the urls.py, settings.py and models.py seems to be parsed only once per server startup (by contrast to the views.py which seems to be parsed eache time a request is made). Does this mean I should declare my variables in one of those files? Or should I store it in a model attribute somehow (as long as it sticks around for as long as the server is running)? This is probably an easy question, but I'm just not sure how it's done in Django. Any comments or advice is much appreciated. Thanks, Joe

  Read the article

• jquery how to create a new div, assign some attributes, and create an id from some other elements at

  - by Ronedog

  How can I accomplish this...what I've tried below is not working and I'm unsure how to make it work. What I'm trying to do is create a div and assign it some attributes, then append this div to all the < li elements that are the on the last node of my unordered list. And lastly, but most important I want to retrieve the value of the attribute called "p_node" from the < li that is being appended to and insert it in as part of the ID of the newely created div Here's my current jquery code: $('<div />,{id:"'+ $("#nav li:not(:has(li))").attr("p_node").val() +'_p_cont_div", class:"property_position"}').appendTo("#nav li:not(:has(li))"); Here's the HTML before the div creation: <ul> <li p_node="98" class="page_name">Category A</li> </ul> <ul> <li p_node="99" class="page_name">Category B</li> </ul> Here's what I want it to look like after the new div creation: <ul> <li p_node="98" class="page_name">Category A</li> <div id="98_p_cont_div" class="property_position"></div> </ul> <ul> <li p_node="99" class="page_name">Category B</li> <div id="99_p_cont_div" class="property_position"></div> </ul> Thanks for your help.

  Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >