Search Results

Search found 5312 results on 213 pages for 'dns recursion'.

Page 180/213 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

• OpenSwan IPsec connection drops after 30 seconds

  - by drcore

  I'm trying to connection from my Linux Mint 16 box to a CloudStack server. Building up the connection works (pings work across the tunnel). However 30 seconds later the IPsec tunnel gets terminated out of the blue. What could cause this consistent behaviour and how to fix it? The tunnel is setup using OpenSwan (U2.6.38/K(no kernel code presently loaded)) with the L2TP IPsec VPN manager from Werner Jaeger 1.0.9. The client is behind a NAT'ed router and the server is on public IP (CloudStack 4.2) Running ipsec verify complains about IPsec support in kernel. Not sure if this is a problem as the connection is being build up: Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.38/K(no kernel code presently loaded) Checking for IPsec support in kernel [FAILED] SAref kernel support [N/A] Checking that pluto is running [FAILED] whack: Pluto is not running (no "/var/run/pluto/pluto.ctl") Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] Tunnel config: version 2.0 # conforms to second version of ipsec.conf specification config setup # plutodebug="parsing emitting control private" plutodebug=none strictcrlpolicy=no nat_traversal=yes interfaces=%defaultroute oe=off # which IPsec stack to use. netkey,klips,mast,auto or none protostack=netkey conn %default keyingtries=3 pfs=no rekey=yes type=transport left=%defaultroute leftprotoport=17/1701 rightprotoport=17/1701 conn Tunnel1 authby=secret right=37.48.75.97 rightid="" auto=add Log file of VPN connection build up: aug. 23 17:12:54.708 ipsec_setup: Starting Openswan IPsec U2.6.38/K3.11.0-12-generic... aug. 23 17:12:55.155 ipsec_setup: multiple ip addresses, using 192.168.178.32 on eth0 aug. 23 17:12:55.165 ipsec__plutorun: Starting Pluto subsystem... aug. 23 17:12:55.174 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d aug. 23 17:12:55.177 recvref[30]: Protocol not available aug. 23 17:12:55.177 xl2tpd[14339]: This binary does not support kernel L2TP. aug. 23 17:12:55.178 Starting xl2tpd: xl2tpd. aug. 23 17:12:55.178 xl2tpd[14345]: xl2tpd version xl2tpd-1.3.1 started on desktopmint PID:14345 aug. 23 17:12:55.178 xl2tpd[14345]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. aug. 23 17:12:55.179 xl2tpd[14345]: Forked by Scott Balmos and David Stipp, (C) 2001 aug. 23 17:12:55.179 xl2tpd[14345]: Inherited by Jeff McAdams, (C) 2002 aug. 23 17:12:55.179 xl2tpd[14345]: Forked again by Xelerance (www.xelerance.com) (C) 2006 aug. 23 17:12:55.180 xl2tpd[14345]: Listening on IP address 0.0.0.0, port 1701 aug. 23 17:12:55.214 ipsec__plutorun: 002 added connection description "Tunnel1" aug. 23 17:13:15.532 104 "Tunnel1" #1: STATE_MAIN_I1: initiate aug. 23 17:13:15.532 003 "Tunnel1" #1: ignoring unknown Vendor ID payload [4f45755c645c6a795c5c6170] aug. 23 17:13:15.532 003 "Tunnel1" #1: received Vendor ID payload [Dead Peer Detection] aug. 23 17:13:15.533 003 "Tunnel1" #1: received Vendor ID payload [RFC 3947] method set to=115 aug. 23 17:13:15.533 106 "Tunnel1" #1: STATE_MAIN_I2: sent MI2, expecting MR2 aug. 23 17:13:15.534 003 "Tunnel1" #1: NAT-Traversal: Result using draft-ietf-ipsec-nat-t-ike (MacOS X): i am NATed aug. 23 17:13:15.534 108 "Tunnel1" #1: STATE_MAIN_I3: sent MI3, expecting MR3 aug. 23 17:13:15.534 010 "Tunnel1" #1: STATE_MAIN_I3: retransmission; will wait 20s for response aug. 23 17:13:15.545 003 "Tunnel1" #1: received Vendor ID payload [CAN-IKEv2] aug. 23 17:13:15.547 004 "Tunnel1" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=aes_128 prf=oakley_sha group=modp2048} aug. 23 17:13:15.547 117 "Tunnel1" #2: STATE_QUICK_I1: initiate aug. 23 17:13:15.547 010 "Tunnel1" #2: STATE_QUICK_I1: retransmission; will wait 20s for response aug. 23 17:13:15.548 004 "Tunnel1" #2: STATE_QUICK_I2: sent QI2, IPsec SA established transport mode {ESP=>0x0ecef28b <0x3e1fbe3b xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=none DPD=none} aug. 23 17:13:16.549 xl2tpd[14345]: Connecting to host <VPN gateway>, port 1701 aug. 23 17:13:18.576 xl2tpd[14345]: Connection established to <VPN gateway>, 1701. Local: 21163, Remote: 12074 (ref=0/0). aug. 23 17:13:18.576 xl2tpd[14345]: Calling on tunnel 21163 aug. 23 17:13:18.577 xl2tpd[14345]: check_control: Received out of order control packet on tunnel 12074 (got 0, expected 1) aug. 23 17:13:18.577 xl2tpd[14345]: handle_packet: bad control packet! aug. 23 17:13:18.577 xl2tpd[14345]: check_control: Received out of order control packet on tunnel 12074 (got 0, expected 1) aug. 23 17:13:18.577 xl2tpd[14345]: handle_packet: bad control packet! aug. 23 17:13:18.599 xl2tpd[14345]: Call established with <VPN gateway>, Local: 39035, Remote: 57266, Serial: 1 (ref=0/0) aug. 23 17:13:18.605 xl2tpd[14345]: start_pppd: I'm running: aug. 23 17:13:18.605 xl2tpd[14345]: "/usr/sbin/pppd" aug. 23 17:13:18.606 xl2tpd[14345]: "passive" aug. 23 17:13:18.606 xl2tpd[14345]: "nodetach" aug. 23 17:13:18.606 xl2tpd[14345]: ":" aug. 23 17:13:18.606 xl2tpd[14345]: "file" aug. 23 17:13:18.606 xl2tpd[14345]: "/etc/ppp/Tunnel1.options.xl2tpd" aug. 23 17:13:18.606 xl2tpd[14345]: "ipparam" aug. 23 17:13:18.607 xl2tpd[14345]: "<VPN gateway>" aug. 23 17:13:18.607 xl2tpd[14345]: "/dev/pts/4" aug. 23 17:13:18.607 pppd[14438]: Plugin passprompt.so loaded. aug. 23 17:13:18.607 pppd[14438]: pppd 2.4.5 started by root, uid 0 aug. 23 17:13:18.608 pppd[14438]: Using interface ppp0 aug. 23 17:13:18.608 pppd[14438]: Connect: ppp0 <--> /dev/pts/4 aug. 23 17:13:21.650 pppd[14438]: CHAP authentication succeeded: Access granted aug. 23 17:13:21.651 pppd[14438]: CHAP authentication succeeded aug. 23 17:13:21.692 pppd[14438]: local IP address 10.1.2.2 aug. 23 17:13:21.693 pppd[14438]: remote IP address 10.1.2.1 aug. 23 17:13:21.693 pppd[14438]: primary DNS address 10.1.2.1 aug. 23 17:13:21.694 pppd[14438]: secondary DNS address 10.1.2.1 aug. 23 17:13:46.528 Stopping xl2tpd: xl2tpd. aug. 23 17:13:46.528 xl2tpd[14345]: death_handler: Fatal signal 15 received aug. 23 17:13:46.529 pppd[14438]: Modem hangup aug. 23 17:13:46.529 pppd[14438]: Connect time 0.5 minutes. aug. 23 17:13:46.529 pppd[14438]: Sent 1866 bytes, received 1241 bytes. aug. 23 17:13:46.529 pppd[14438]: Connection terminated. aug. 23 17:13:46.562 ipsec_setup: Stopping Openswan IPsec... aug. 23 17:13:46.576 pppd[14438]: Exit.

  Read the article

• Network Logon Issues with Group Policy and Network

  - by bobloki

  I am gravely in need of your help and assistance. We have a problem with our logon and startup to our Windows 7 Enterprise system. We have more than 3000 Windows Desktops situated in roughly 20+ buildings around campus. Almost every computer on campus has the problem that I will be describing. I have spent over one month peering over etl files from Windows Performance Analyzer (A great product) and hundreds of thousands of event logs. I come to you today humbled that I could not figure this out. The problem as simply put our logon times are extremely long. An average first time logon is roughly 2-10 minutes depending on the software installed. All computers are Windows 7, the oldest computers being 5 years old. Startup times on various computers range from good (1-2 minutes) to very bad (5-60). Our second time logons range from 30 seconds to 4 minutes. We have a gigabit connection between each computer on the network. We have 5 domain controllers which also double as our DNS servers. Initial testing led us to believe that this was a software problem. So I spent a few days testing machines only to find inconsistent results from the etl files from xperfview. Each subset of computers on campus had a different subset of software issues, none seeming to interfere with logon just startup. So I started looking at our group policy and located some very interesting event ID’s. Group Policy 1129: The processing of Group Policy failed because of lack of network connectivity to a domain controller. Group Policy 1055: The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following: a) Name Resolution failure on the current domain controller. b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller). NETLOGON 5719 : This computer was not able to set up a secure session with a domain controller in domain OURDOMAIN due to the following: There are currently no logon servers available to service the logon request. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. E1kexpress 27: Intel®82567LM-3 Gigabit Network Connection – Network link is disconnected. NetBT 4300 – The driver could not be created. WMI 10 - Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. More or less with timestamps it becomes apparent that the network maybe the issue. 1:25:57 - Group Policy is trying to discover the domain controller information 1:25:57 - The network link has been disconnected 1:25:58 - The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has successfully processed. If you do not see a success message for several hours, then contact your administrator. 1:25:58 - Making LDAP calls to connect and bind to active directory. DC1.ourdomain.edu 1:25:58 - Call failed after 0 milliseconds. 1:25:58 - Forcing rediscovery of domain controller details. 1:25:58 - Group policy failed to discover the domain controller in 1030 milliseconds 1:25:58 - Periodic policy processing failed for computer OURDOMAIN\%name%$ in 1 seconds. 1:25:59 - A network link has been established at 1Gbps at full duplex 1:26:00 - The network link has been disconnected 1:26:02 - NtpClient was unable to set a domain peer to use as a time source because of discovery error. NtpClient will try again in 3473457 minutes and DOUBLE THE REATTEMPT INTERVAL thereafter. 1:26:05 - A network link has been established at 1Gbps at full duplex 1:26:08 - Name resolution for the name %Name% timed out after none of the configured DNS servers responded. 1:26:10 – The TCP/IP NetBIOS Helper service entered the running state. 1:26:11 - The time provider NtpClient is currently receiving valid time data at dc4.ourdomain.edu 1:26:14 – User Logon Notification for Customer Experience Improvement Program 1:26:15 - Group Policy received the notification Logon from Winlogon for session 1. 1:26:15 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4. ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:18 - Computer details: Computer role : 2 Network name : (Blank) 1:26:18 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu. The call completed in 2309 milliseconds. 1:26:18 - Group Policy successfully discovered the Domain Controller in 2918 milliseconds. 1:26:19 - The WinHTTP Web Proxy Auto-Discovery Service service entered the running state. 1:26:46 - The Network Connections service entered the running state. 1:27:10 – Retrieved account information 1:27:10 – The system call to get account information completed. 1:27:10 - Starting policy processing due to network state change for computer OURDOMAIN\%name%$ 1:27:10 – Network state change detected 1:27:10 - Making system call to get account information. 1:27:11 - Making LDAP calls to connect and bind to Active Directory. dc4.ourdomain.edu 1:27:13 - Computer details: Computer role : 2 Network name : ourdomain.edu (Now not blank) 1:27:13 - Group Policy successfully discovered the Domain Controller in 2886 milliseconds. 1:27:13 - The LDAP call to connect and bind to Active Directory completed. dc4.ourdomain.edu The call completed in 2371 milliseconds. 1:27:15 - Estimated network bandwidth on one of the connections: 0 kbps. 1:27:15 - Estimated network bandwidth on one of the connections: 8545 kbps. 1:27:15 - A fast link was detected. The Estimated bandwidth is 8545 kbps. The slow link threshold is 500 kbps. 1:27:17 – Powershell - Engine state is changed from Available to Stopped. 1:27:20 - Completed Group Policy Local Users and Groups Extension Processing in 4539 milliseconds. 1:27:25 - Completed Group Policy Scheduled Tasks Extension Processing in 5210 milliseconds. 1:27:27 - Completed Group Policy Registry Extension Processing in 1529 milliseconds. 1:27:27 - Completed policy processing due to network state change for computer OURDOMAIN\%name%$ in 16 seconds. 1:27:27 – The Group Policy settings for the computer were processed successfully. There were no changes detected since the last successful processing of Group Policy. Any help would be appreciated. Please ask for any relevant information and it will be provided as soon as possible.

  Read the article

• Sendmail to local domain ignoring MX records (part 2)

  - by FractalizeR

  Hello. I have the exact problem, like in this post: http://serverfault.com/questions/25068/sendmail-to-local-domain-ignoring-mx-records I am also using email provider like GMail For Your Domain (which stores your mail and manages it). I am sending mail from my server directly, but receiving mail is done via Yandex (email provider). Since the server hosts forum, I prefer to send mail directly from it because using another mail provider can slow things. Also, when I send 300.000 emails to my subscribers, email provider will surely block me thinking I send spam. My DNS zone now is: ; ; GSMFORUM.RU ; $TTL 1H gsmforum.ru. SOA ns1.hc.ru. support.hc.ru. ( 2009122268 ; Serial 1H ; Refresh 30M ; Retry 1W ; Expire 1H ) ; Minimum gsmforum.ru. NS ns1.hc.ru. gsmforum.ru. NS ns2.hc.ru. @ A 79.174.68.223 *.gsmforum.ru. CNAME @ ns1 A 79.174.68.223 ns2 A 79.174.68.224 @ MX 10 mx.yandex.ru. mail CNAME domain.mail.yandex.net. yamail-xxxxxxxxx CNAME mail.yandex.ru. Server hostname is server.gsmforum.ru. May be this is the cause? Can someone explain the reason of the matter (the rules that make sendmail consider domain to be local)? Can I easily change *.gsmforum.ru. CNAME @ into *.gsmforum.ru. A 79.174.68.224 to solve this problem? [root@server ~]# cat /etc/mail/local-host-names localhost localhost.localdomain This server hosts gsmforum.ru so I cannot put it into another domain like David Mackintosh suggests. Putting domain in mailertable doesn't solve the problem also. sendmail -bt still shows, that address is local. DontProbeInterfaces is also set to true at sendmail config. M4 file follows: divert(-1)dnl dnl # dnl # This is the sendmail macro config file for m4. If you make changes to dnl # /etc/mail/sendmail.mc, you will need to regenerate the dnl # /etc/mail/sendmail.cf file by confirming that the sendmail-cf package is dnl # installed and then performing a dnl # dnl # make -C /etc/mail dnl # include(`/usr/share/sendmail-cf/m4/cf.m4')dnl VERSIONID(`setup for linux')dnl OSTYPE(`linux')dnl dnl # dnl # Do not advertize sendmail version. dnl # dnl define(`confSMTP_LOGIN_MSG', `$j Sendmail; $b')dnl dnl # dnl # default logging level is 9, you might want to set it higher to dnl # debug the configuration dnl # dnl define(`confLOG_LEVEL', `9')dnl dnl # dnl # Uncomment and edit the following line if your outgoing mail needs to dnl # be sent out through an external mail server: dnl # dnl define(`SMART_HOST', `smtp.your.provider')dnl dnl # define(`confDEF_USER_ID', ``8:12'')dnl dnl define(`confAUTO_REBUILD')dnl define(`confTO_CONNECT', `1m')dnl define(`confTRY_NULL_MX_LIST', `True')dnl define(`confDONT_PROBE_INTERFACES',`True') define(`PROCMAIL_MAILER_PATH', `/usr/bin/procmail')dnl define(`ALIAS_FILE', `/etc/aliases')dnl define(`STATUS_FILE', `/var/log/mail/statistics')dnl define(`UUCP_MAILER_MAX', `2000000')dnl define(`confUSERDB_SPEC', `/etc/mail/userdb.db')dnl define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl define(`confAUTH_OPTIONS', `A')dnl dnl # dnl # The following allows relaying if the user authenticates, and disallows dnl # plaintext authentication (PLAIN/LOGIN) on non-TLS links dnl # dnl define(`confAUTH_OPTIONS', `A p')dnl dnl # dnl # PLAIN is the preferred plaintext authentication method and used by dnl # Mozilla Mail and Evolution, though Outlook Express and other MUAs do dnl # use LOGIN. Other mechanisms should be used if the connection is not dnl # guaranteed secure. dnl # Please remember that saslauthd needs to be running for AUTH. dnl # dnl TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl dnl define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl dnl # dnl # Rudimentary information on creating certificates for sendmail TLS: dnl # cd /usr/share/ssl/certs; make sendmail.pem dnl # Complete usage: dnl # make -C /usr/share/ssl/certs usage dnl # dnl define(`confCACERT_PATH', `/etc/pki/tls/certs')dnl dnl define(`confCACERT', `/etc/pki/tls/certs/ca-bundle.crt')dnl dnl define(`confSERVER_CERT', `/etc/pki/tls/certs/sendmail.pem')dnl dnl define(`confSERVER_KEY', `/etc/pki/tls/certs/sendmail.pem')dnl dnl # dnl # This allows sendmail to use a keyfile that is shared with OpenLDAP's dnl # slapd, which requires the file to be readble by group ldap dnl # dnl define(`confDONT_BLAME_SENDMAIL', `groupreadablekeyfile')dnl dnl # dnl define(`confTO_QUEUEWARN', `4h')dnl dnl define(`confTO_QUEUERETURN', `5d')dnl dnl define(`confQUEUE_LA', `12')dnl dnl define(`confREFUSE_LA', `18')dnl define(`confTO_IDENT', `0')dnl dnl FEATURE(delay_checks)dnl FEATURE(`no_default_msa', `dnl')dnl FEATURE(`smrsh', `/usr/sbin/smrsh')dnl FEATURE(`mailertable', `hash -o /etc/mail/mailertable.db')dnl FEATURE(`virtusertable', `hash -o /etc/mail/virtusertable.db')dnl FEATURE(redirect)dnl FEATURE(always_add_domain)dnl FEATURE(use_cw_file)dnl FEATURE(use_ct_file)dnl dnl # dnl # The following limits the number of processes sendmail can fork to accept dnl # incoming messages or process its message queues to 20.) sendmail refuses dnl # to accept connections once it has reached its quota of child processes. dnl # dnl define(`confMAX_DAEMON_CHILDREN', `20')dnl dnl # dnl # Limits the number of new connections per second. This caps the overhead dnl # incurred due to forking new sendmail processes. May be useful against dnl # DoS attacks or barrages of spam. (As mentioned below, a per-IP address dnl # limit would be useful but is not available as an option at this writing.) dnl # dnl define(`confCONNECTION_RATE_THROTTLE', `3')dnl dnl # dnl # The -t option will retry delivery if e.g. the user runs over his quota. dnl # FEATURE(local_procmail, `', `procmail -t -Y -a $h -d $u')dnl FEATURE(`access_db', `hash -T<TMPF> -o /etc/mail/access.db')dnl FEATURE(`blacklist_recipients')dnl EXPOSED_USER(`root')dnl dnl # dnl # For using Cyrus-IMAPd as POP3/IMAP server through LMTP delivery uncomment dnl # the following 2 definitions and activate below in the MAILER section the dnl # cyrusv2 mailer. dnl # dnl define(`confLOCAL_MAILER', `cyrusv2')dnl dnl define(`CYRUSV2_MAILER_ARGS', `FILE /var/lib/imap/socket/lmtp')dnl dnl # dnl # The following causes sendmail to only listen on the IPv4 loopback address dnl # 127.0.0.1 and not on any other network devices. Remove the loopback dnl # address restriction to accept email from the internet or intranet. dnl # DAEMON_OPTIONS(`Name=MTA,Port=smtp') dnl # dnl # The following causes sendmail to additionally listen to port 587 for dnl # mail from MUAs that authenticate. Roaming users who can't reach their dnl # preferred sendmail daemon due to port 25 being blocked or redirected find dnl # this useful. dnl # dnl DAEMON_OPTIONS(`Port=submission, Name=MSA, M=Ea')dnl dnl # dnl # The following causes sendmail to additionally listen to port 465, but dnl # starting immediately in TLS mode upon connecting. Port 25 or 587 followed dnl # by STARTTLS is preferred, but roaming clients using Outlook Express can't dnl # do STARTTLS on ports other than 25. Mozilla Mail can ONLY use STARTTLS dnl # and doesn't support the deprecated smtps; Evolution <1.1.1 uses smtps dnl # when SSL is enabled-- STARTTLS support is available in version 1.1.1. dnl # dnl # For this to work your OpenSSL certificates must be configured. dnl # dnl DAEMON_OPTIONS(`Port=smtps, Name=TLSMTA, M=s')dnl dnl # dnl # The following causes sendmail to additionally listen on the IPv6 loopback dnl # device. Remove the loopback address restriction listen to the network. dnl # dnl DAEMON_OPTIONS(`port=smtp,Addr=::1, Name=MTA-v6, Family=inet6')dnl dnl # dnl # enable both ipv6 and ipv4 in sendmail: dnl # dnl DAEMON_OPTIONS(`Name=MTA-v4, Family=inet, Name=MTA-v6, Family=inet6') dnl # dnl # We strongly recommend not accepting unresolvable domains if you want to dnl # protect yourself from spam. However, the laptop and users on computers dnl # that do not have 24x7 DNS do need this. dnl # FEATURE(`accept_unresolvable_domains')dnl dnl # dnl FEATURE(`relay_based_on_MX')dnl dnl # dnl # Also accept email sent to "localhost.localdomain" as local email. dnl # LOCAL_DOMAIN(`localhost.localdomain')dnl dnl # dnl # The following example makes mail from this host and any additional dnl # specified domains appear to be sent from mydomain.com dnl # dnl MASQUERADE_AS(`mydomain.com')dnl dnl # dnl # masquerade not just the headers, but the envelope as well dnl # dnl FEATURE(masquerade_envelope)dnl dnl # dnl # masquerade not just @mydomainalias.com, but @*.mydomainalias.com as well dnl # dnl FEATURE(masquerade_entire_domain)dnl dnl # dnl MASQUERADE_DOMAIN(localhost)dnl dnl MASQUERADE_DOMAIN(localhost.localdomain)dnl dnl MASQUERADE_DOMAIN(mydomainalias.com)dnl dnl MASQUERADE_DOMAIN(mydomain.lan)dnl MAILER(smtp)dnl MAILER(procmail)dnl dnl MAILER(cyrusv2)dnl FEATURE(`dnsbl',`zen.spamhaus.org',`Rejected - your IP is blacklisted by http://www.spamhaus.org')

  Read the article

• VPN still working after rebooting without client - DrayTek client shows "No Connection"

  - by HeavenCore

  My home network is a simple router + pc's setup, nothing fancy - the router has DHCP enabled for 192.168.0.X (255.255.255.0) and my PC picks up the address 192.168.0.82. There are no devices on my local lan in the 192.168.1.x range. On my pc i have the DrayTek VPN client, and a company i do some work for has a DrayTek Vigor router. The VPN client establishes a VPN to that remote company using an IPSec Tunnel (PreShared Key - no encryption) Last night i shut down my pc with the VPN tunnel still connected, when i turned my computer on this morning i accidentally clicked an RDP shortcut to 192.168.1.2 (a host in the remote company) and to my amazement it connected?!? I checked and the DrayTek VPN client isnt running, and when i did run it, it clearly shows "Status: No connection". confused as to how my machine can still talk to this remote machine i tried a trace: C:\Users\HeavenCore>tracert 192.168.1.2 Tracing route to C4SERVERII [192.168.1.2] over a maximum of 30 hops: 1 * * * Request timed out. 2 * * * Request timed out. 3 * * * Request timed out. 4 * * * Request timed out. 5 * * * Request timed out. 6 * * * Request timed out. 7 * * * Request timed out. 8 * * * Request timed out. 9 * * * Request timed out. 10 * * * Request timed out. 11 * * * Request timed out. 12 15 ms 21 ms 32 ms C4SERVERII [192.168.1.2] Trace complete. No indication there as to how it's getting from my network to the remote host. with my network mask being 255.255.255.0 with ip 192.168.0.1 i dont even see how packets are routing to 192.168.1.1 - unless there was a static route in place, so i checked the route table: IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.82 266 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 On-link 192.168.0.82 266 192.168.0.82 255.255.255.255 On-link 192.168.0.82 266 192.168.0.255 255.255.255.255 On-link 192.168.0.82 266 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.0.82 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.0.82 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.0.1 Default =========================================================================== As far as i can see, nothing indicating how my packets are getting to 192.168.1.2??? To confirm i was on a different subnet i did an ipconfig /all: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ether net Controller Physical Address. . . . . . . . . : 00-23-54-F3-4E-BA DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.82(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 208.67.222.222 NetBIOS over Tcpip. . . . . . . . : Enabled Yet straight after confirming my ip and subnet as above i can go ahead and ping the remote machine: C:\Users\HeavenCore>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.2: bytes=32 time=48ms TTL=127 Reply from 192.168.1.2: bytes=32 time=23ms TTL=127 Reply from 192.168.1.2: bytes=32 time=103ms TTL=127 Reply from 192.168.1.2: bytes=32 time=25ms TTL=127 Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 23ms, Maximum = 103ms, Average = 49ms Also, note on the ping how the times are 35ms ish, this clearly shows the pings are to the remote host and not something on my local lan (all stuff on my local lan pings in 0ms) - plus i verified the host was actually the host via RDP. My Question: Can an IPSec tunnel stay up some how after a reboot without use of the VPN client? (well, i can clearly see that it can) - where in windows is there visibility of this? how does my machine know where to route the packets? I appreciate any insights & thoughts!

  Read the article

• Google Streetview under V3 Code having hiccups and delays

  - by jeffkee

  http://new.brocksmeaton.com/showlisting.php/196/-7210-Arbutus-Place-Whytecliff-West-Vancouver-west-vancouver-real-estate The really odd thing is I had this working yesterday and today it's not working. I'm using jQuery UI to switch the tabs on the location map/street view module. I've recently upgraded the Google Maps code as well as the Google Streetview code to version 3. So when I open it in Firefox, with Firebug on, as soon as I switch to the Streetview tab, the navigation and zoom in out controls show, but nothing shows.. and then when I try to drag the map around, it does not move around, but instead, causes errors in Firebug: "too much recursion". So it causes the whole browser to become buggy, slows down, and the errors happen, and nothing shows on the streetview pane. Most of the map loading code is located in inline Javascript on the page itself. Some of the code is under showlisting.js <script type="text/javascript" src="/js/showlisting.js"></script> <script type="text/javascript"> // Call this function when the page has been loaded function loadmap() { var latlng = new google.maps.LatLng(49.374918567425475, -123.28996885871596); var myOptions = { zoom: 14, center: latlng, mapTypeId: google.maps.MapTypeId.ROADMAP }; var map = new google.maps.Map(document.getElementById('listingmap'), myOptions); var listingicon = '/images/activehouse.png'; var infowindow = new google.maps.InfoWindow(); homemarker = new google.maps.Marker({position: latlng, map: map, icon: listingicon}); google.maps.event.addListener(homemarker, 'click', function() { infowindow.setContent('<div style="height:80px; width:250px; color:#333;"><p>7210 Arbutus Place<br />Whytecliff, West Vancouver</div>') infowindow.open(map,homemarker); }); } function loadpano() { var latlng = new google.maps.LatLng(49.374918567425475, -123.28996885871596); $('#listingpanorama').slideDown(500, function() { var panoramaOptions = { addressControl:false, position: latlng, pov: { heading: 34, pitch: 30, zoom: 1 } }; var panorama = new google.maps.StreetViewPanorama(document.getElementById('listingpanorama'), panoramaOptions); }); return false; } </script> My old one under GOogle API Version 2 is here FYI if you want to take a look at it: http://demo.brixwork.com/master/showlisting.php/63/1701-388-Drake-Street-False-Creek-North-Vancouver-

  Read the article

• Python - calculate multinomial probability density functions on large dataset?

  - by Seafoid

  Hi, I originally intended to use MATLAB to tackle this problem but the inbuilt functions has limitations that do not suit my goal. The same limitation occurs in NumPy. I have two tab-delimited files. The first is a file showing amino acid residue, frequency and count for an in-house database of protein structures, i.e. A 0.25 1 S 0.25 1 T 0.25 1 P 0.25 1 The second file consists of quadruplets of amino acids and the number of times they occur, i.e. ASTP 1 Note, there are 8,000 such quadruplets. Based on the background frequency of occurence of each amino acid and the count of quadruplets, I aim to calculate the multinomial probability density function for each quadruplet and subsequently use it as the expected value in a maximum likelihood calculation. The multinomial distribution is as follows: f(x|n, p) = n!/(x1!*x2!*...*xk!)*((p1^x1)*(p2^x2)*...*(pk^xk)) where x is the number of each of k outcomes in n trials with fixed probabilities p. n is 4 four in all cases in my calculation. I have created three functions to calculate this distribution. # functions for multinomial distribution def expected_quadruplets(x, y): expected = x*y return expected # calculates the probabilities of occurence raised to the number of occurrences def prod_prob(p1, a, p2, b, p3, c, p4, d): prob_prod = (pow(p1, a))*(pow(p2, b))*(pow(p3, c))*(pow(p4, d)) return prob_prod # factorial() and multinomial_coefficient() work in tandem to calculate C, the multinomial coefficient def factorial(n): if n <= 1: return 1 return n*factorial(n-1) def multinomial_coefficient(a, b, c, d): n = 24.0 multi_coeff = (n/(factorial(a) * factorial(b) * factorial(c) * factorial(d))) return multi_coeff The problem is how best to structure the data in order to tackle the calculation most efficiently, in a manner that I can read (you guys write some cryptic code :-)) and that will not create an overflow or runtime error. To data my data is represented as nested lists. amino_acids = [['A', '0.25', '1'], ['S', '0.25', '1'], ['T', '0.25', '1'], ['P', '0.25', '1']] quadruplets = [['ASTP', '1']] I initially intended calling these functions within a nested for loop but this resulted in runtime errors or overfloe errors. I know that I can reset the recursion limit but I would rather do this more elegantly. I had the following: for i in quadruplets: quad = i[0].split(' ') for j in amino_acids: for k in quadruplets: for v in k: if j[0] == v: multinomial_coefficient(int(j[2]), int(j[2]), int(j[2]), int(j[2])) I haven'te really gotten to how to incorporate the other functions yet. I think that my current nested list arrangement is sub optimal. I wish to compare the each letter within the string 'ASTP' with the first component of each sub list in amino_acids. Where a match exists, I wish to pass the appropriate numeric values to the functions using indices. Is their a better way? Can I append the appropriate numbers for each amino acid and quadruplet to a temporary data structure within a loop, pass this to the functions and clear it for the next iteration? Thanks, S :-)

  Read the article

• Need help with implementation of the jQuery LiveUpdate routine

  - by miCRoSCoPiC_eaRthLinG

  Hey all, Has anyone worked with the LiveUpdate function (may be a bit of a misnomer) found on this page? It's not really a live search/update function, but a quick filtering mechanism for a pre-existing list, based on the pattern you enter in a text field. For easier reference, I'm pasting the entire function in here: jQuery.fn.liveUpdate = function(list){ list = jQuery(list); if ( list.length ) { var rows = list.children('li'), cache = rows.map(function(){ return this.innerHTML.toLowerCase(); }); this .keyup(filter).keyup() .parents('form').submit(function(){ return false; }); } return this; function filter(){ var term = jQuery.trim( jQuery(this).val().toLowerCase() ), scores = []; if ( !term ) { rows.show(); } else { rows.hide(); cache.each(function(i){ var score = this.score(term); if (score > 0) { scores.push([score, i]); } }); jQuery.each(scores.sort(function(a, b){return b[0] - a[0];}), function(){ jQuery(rows[ this[1] ]).show(); }); } } }; I have this list, with members as the ID. And a text field with say, qs as ID. I tried binding the function in the following manner: $( '#qs' ).liveUpdate( '#members' ); But when I do this, the function is called only ONCE when the page is loaded (I put in some console.logs in the function) but never after when text is keyed into the text field. I also tried calling the routine from the keyup() function of qs. $( '#qs' ).keyup( function() { $( this ).liveUpdate( '#members' ); }); This ends up going into infinite loops (almost) and halting with "Too much recursion" errors. So can anyone please shed some light on how I am supposed to actually implement this function? Also while you are at it, can someone kindly explain this line to me: var score = this.score(term); What I want to know is where this member method score() is coming from? I didn't find any such method built into JS or jQuery. Thanks for all the help, m^e

  Read the article

• How to dynamically expand a string in C

  - by sa125

  Hi - I have a function that recursively makes some calculations on a set of numbers. I want to also pretty-print the calculation in each recursion call by passing the string from the previous calculation and concatenating it with the current operation. A sample output might look like this: 3 (3) + 2 ((3) + 2) / 4 (((3) + 2) / 4) x 5 ((((3) + 2) / 4) x 5) + 14 ... and so on So basically, the second call gets 3 and appends + 2 to it, the third call gets passed (3) + 2 , etc. My recursive function prototype looks like this: void calc_rec(int input[], int length, char * previous_string); I wrote a 2 helper functions to help me with the operation, but they implode when I test them: /********************************************************************** * dynamically allocate and append new string to old string and return a pointer to it **********************************************************************/ char * strapp(char * old, char * new) { // find the size of the string to allocate int len = sizeof(char) * (strlen(old) + strlen(new)); // allocate a pointer to the new string char * out = (char*)malloc(len); // concat both strings and return sprintf(out, "%s%s", old, new); return out; } /********************************************************************** * returns a pretty math representation of the calculation op **********************************************************************/ char * mathop(char * old, char operand, int num) { char * output, *newout; char fstr[50]; // random guess.. couldn't think of a better way. sprintf(fstr, " %c %d", operand, num); output = strapp(old, fstr); newout = (char*)malloc( 2*sizeof(char)+sizeof(output) ); sprintf(newout, "(%s)", output); free(output); return newout; } void test_mathop() { int i, total = 10; char * first = "3"; printf("in test_mathop\n"); while (i < total) { first = mathop(first, "+", i); printf("%s\n", first); ++i; } } strapp() returns a pointer to newly appended strings (works), and mathop() is supposed to take the old calculation string ("(3)+2"), a char operand ('+', '-', etc) and an int, and return a pointer to the new string, for example "((3)+2)/3". Any idea where I'm messing things up? thanks.

  Read the article

• Create links programmatically inside an EmberJS view

  - by Michael Gallego

  I have a pretty complex view to render which involves some kind of recursion (the typical folder/file nested list). The fact that it contains heterogeneous objects (folders and files) make it even harder to write Handlebars templates. Therefore, the only solution I've found is to create a view, and manually fill the render buffer. I came with the following solution: App.LibraryContentList = Ember.View.extend({ tagName: 'ol', classNames: ['project-list', 'dd-list'], nameChanged: function() { this.rerender(); }.observes('[email protected]'), render: function(buffer) { // We only start with depth of zero var content = this.get('content').filterProperty('depth', 0); content.forEach(function(item) { this.renderItem(buffer, item); }, this); }, renderItem: function(buffer, item) { switch (item.constructor.toString()) { case 'Photo.Folder': this.renderFolder(buffer, item); break; case 'Photo.File': this.renderFile(buffer, item); break; } }, renderFolder: function(buffer, folder) { buffer.push('<li class="folder dd-item">'); buffer.push('<span class="dd-handle">' + folder.get('name') + '</span>'); // Merge sub folders and files, and sort them by sort order var content = this.mergeAndSort(); if (content.get('length') > 0) { buffer.push('<ol>'); content.forEach(function(item) { this.renderItem(buffer, item); }, this); buffer.push('</ol>'); } buffer.push('</li>'); }, renderFile: function(buffer, album) { buffer.push('<li class="album dd-item">'); buffer.push('<span class="dd-handle">' + file.get('name') + '</span>'); buffer.push('</li>'); } }); Now, what I'd like is to be able to add links so that each folder and each file is clickable and redirect to another route. But how am I supposed to do that, as I don't have access to the linkTo helper? I've tried to play with the LinkView view, but without any success. Should I register handlers manually for each item? I've also thought about breaking that with a CollectionView instead, and splitting the content by depth so that I could render it using templates, but it seems more complicated. Any thoughts?

  Read the article

• Write Scheme data structures so they can be eval-d back in, or alternative

  - by Jesse Millikan

  I'm writing an application (A juggling pattern animator) in PLT Scheme that accepts Scheme expressions as values for some fields. I'm attempting to write a small text editor that will let me "explode" expressions into expressions that can still be eval'd but contain the data as literals for manual tweaking. For example, (4hss->sexp "747") is a function call that generates a legitimate pattern. If I eval and print that, it becomes (((7 3) - - -) (- - (4 2) -) (- (7 2) - -) (- - - (7 1)) ((4 0) - - -) (- - (7 0) -) (- (7 2) - -) (- - - (4 3)) ((7 3) - - -) (- - (7 0) -) (- (4 1) - -) (- - - (7 1))) which can be "read" as a string, but will not "eval" the same as the function. For this statement, of course, what I need would be as simple as (quote (((7 3... but other examples are non-trivial. This one, for example, contains structs which print as vectors: pair-of-jugglers ; --> (#(struct:hand #(struct:position -0.35 2.0 1.0) #(struct:position -0.6 2.05 1.1) 1.832595714594046) #(struct:hand #(struct:position 0.35 2.0 1.0) #(struct:position 0.6 2.0500000000000003 1.1) 1.308996938995747) #(struct:hand #(struct:position 0.35 -2.0 1.0) #(struct:position 0.6 -2.05 1.1) -1.3089969389957472) #(struct:hand #(struct:position -0.35 -2.0 1.0) #(struct:position -0.6 -2.05 1.1) -1.8325957145940461)) I've thought of at least three possible solutions, none of which I like very much. Solution A is to write a recursive eval-able output function myself for a reasonably large subset of the values that I might be using. There (probably...) won't be any circular references by the nature of the data structures used, so that wouldn't be such a long job. The output would end up looking like `(((3 0) (... ; ex 1 `(,(make-hand (make-position ... ; ex 2 Or even worse if I could't figure out how to do it properly with quasiquoting. Solution B would be to write out everything as (read (open-input-string "(big-long-s-expression)")) which, technically, solves the problem I'm bringing up but is... ugly. Solution C might be a different approach of giving up eval and using only read for parsing input, or an uglier approach where the s-expression is used as directly data if eval fails, but those both seem unpleasant compared to using scheme values directly. Undiscovered Solution D would be a PLT Scheme option, function or library I haven't located that would match Solution A. Help me out before I start having bad recursion dreams again.

  Read the article

• Closure Tables - Is this enough data to display a tree view?

  - by James Pitt

  Here is the table I have created by testing the closure table method. | id | parentId | childId | hops | | | | | 270 | 6 | 6 | 0 | 271 | 7 | 7 | 0 | 272 | 8 | 8 | 0 | 273 | 9 | 9 | 0 | 276 | 10 | 10 | 0 | 281 | 9 | 10 | 1 | 282 | 7 | 9 | 1 | 283 | 7 | 10 | 2 | 285 | 7 | 8 | 1 | 286 | 6 | 7 | 1 | 287 | 6 | 9 | 2 | 288 | 6 | 10 | 3 | 289 | 6 | 8 | 2 | 293 | 6 | 9 | 1 | 294 | 6 | 10 | 2 I am trying to create a simple tree of this using PHP. There does not seem to be enough data to create the table. For example, when I look purely at parentId = 6: -Part 6 -Part 7 - ? - ? -Part 9 - ? - ? We know that parts 8 and 10 exists below Part 7 or 9, but not which. We know that part 10 exists at both 3 and 4 nodes deep but where? If I look at other data in the table it is possible to tell it should be: - Part 6 - Part 7 - Part 9 - Part 10 - Part 9 - Part 10 I thought one of the benefits of closure tables was there was no need for recursive queries? Could you help explain what I am doing wrong? EDIT: For clarification, this is a mapping table. There is another table called "parts" which has a column called part_id that correlates to both the parentId and childId columns in the "closure" table. The "id" column in the table above (closure) is just for the purposes of maintaining a primary key. It is not really necessary. The methods I have used to create this closure table is described in the following article: http://dirtsimple.org/2010/11/simplest-way-to-do-tree-based-queries.html EDIT2: It can have two and three hops. I will explain easier by assigning names to the items. Part 6 = Bicycle Part 7 = Gears Part 8 = Chain Part 9 = Bolt Part 10 = Nut Nut is part of Bolt. The Bolt and Nut combo exists directly within Bicycle and within Gears which is part of Bicycle. In relation to what method to use I have looked at Adjacency, Edges, Enum Paths, Closures, DAGS(networks) and the Nested Set Model. I am still trying to work out what is what, but this is an extremely complex component database where there are multiple parents and any modification to a sub-tree must propogate through the other trees. More importantly there will be insertions, deletions and tree views that I wish to avoid recursion during general use, even at the cost of database space and query time during entry.

  Read the article

• c++ quick sort running time

  - by chnet

  I have a question about quick sort algorithm. I implement quick sort algorithm and play it. The elements in initial unsorted array are random numbers chosen from certain range. I find the range of random number effects the running time. For example, the running time for 1, 000, 000 random number chosen from the range (1 - 2000) takes 40 seconds. While it takes 9 seconds if the 1,000,000 number chosen from the range (1 - 10,000). But I do not know how to explain it. In class, we talk about the pivot value can effect the depth of recursion tree. For my implementation, the last value of the array is chosen as pivot value. I do not use randomized scheme to select pivot value. int partition( vector<int> &vec, int p, int r) { int x = vec[r]; int i = (p-1); int j = p; while(1) { if (vec[j] <= x){ i = (i+1); int temp = vec[j]; vec[j] = vec[i]; vec[i] = temp; } j=j+1; if (j==r) break; } int temp = vec[i+1]; vec[i+1] = vec[r]; vec[r] = temp; return i+1; } void quicksort ( vector<int> &vec, int p, int r) { if (p<r){ int q = partition(vec, p, r); quicksort(vec, p, q-1); quicksort(vec, q+1, r); } } void random_generator(int num, int * array) { srand((unsigned)time(0)); int random_integer; for(int index=0; index< num; index++){ random_integer = (rand()%10000)+1; *(array+index) = random_integer; } } int main() { int array_size = 1000000; int input_array[array_size]; random_generator(array_size, input_array); vector<int> vec(input_array, input_array+array_size); clock_t t1, t2; t1 = clock(); quicksort(vec, 0, (array_size - 1)); // call quick sort int length = vec.size(); t2 = clock(); float diff = ((float)t2 - (float)t1); cout << diff << endl; cout << diff/CLOCKS_PER_SEC <<endl; }

  Read the article

• generated service mock: everything but RhinoMocks fails?

  - by hko

  I have the "quest" to search for the next Mocking Framework for my company, and basically it's down to NSubstitute (simplest syntax, but no strict mocks), FakeItEasy(best reviews, Roy Osherove bonus, and slightly better lib support than NSubstitute), Moq (best "other libs support", biggest featureset, downside: mock.Object). We definitely want to move on from RhinoMocks, e.g. because of the unusefull interactiontest error messages (it should tell me what the parameter was instead, when a verification fails). So I was pretty surprised the other day (that was yesterday) when I found out RhinoMocks could do a thing where every other mock framework fails at: Mocking an autogenerated SomethingService (a typical VS autogenerated service with a default construtor in a partial class). Please don't argue about the design.. I intend to write lightweight integration tests (and some unit tests), and I can't mess around with the service, the product is installed on too many customers system. See this code: // here the NSubstitute and FakeItEasy equivalents throw an exception.. see below TicketStoreService fakeTicketStoreService = MockRepository.GenerateMock<TicketStoreService>(); fakeTicketStoreService.Expect(service => service.DoSomething(Arg.Is(new Guid())).Return(new Guid()); fakeTicketStoreService.DoSomething(Arg.Is(new Guid())); fakeTicketStoreService.VerifyAllExpectations(); Note that DoSomething is a non-virtual methodcall in an autogenerated class. So it shouldn't work, according to common knowledge. But it does. Problem is that it's the only (non commercial) framework that can do this: Rhino.Mocks works, and verification works too FakeItEasy says it doesn't find a default constructor (probably just wrong exception message): No default constructor was found on the type SomeNamespace.TicketStoreService Moq gives something sane and understandable: Invalid setup on a non-virtual (overridable in VB) member: service=> service.DoSomething Nsubstitute gives a message System.NotSupportedException: Cannot serialize member System.ComponentModel.Component.Site of type System.ComponentModel.ISite because it is an interface. I'm really wondering what's going on here with the frameworks, except Moq. The "fancy new" frameworks seem to have an initial perf hit too, probably preparing some Type cache and serializing stuff, whilst RhinoMocks somehow manages to create a very "slim" mock without recursion. I have to admit I didn't like RhinoMocks very well, but here it shines.. unfortunately. So, is there a way to get that to work with newer (non-commercial!) mocking frameworks, or somehow get a sane error message out of Rhino.Mocks? And why can Rhino.Mocks achieve this, when clearly every Mocking framework states it can only work with virtual methods when given a concrete class? Let's not derail the discussion by talking about alternative approaches like Extract&Override or runtime-proxy Mocking frameworks like JustMock/TypeMock/Moles or the new Fakes framework, I know these, but that would be less ideal solutions, for reasons beyond this topic. Any help appreciated..

  Read the article

• How to Convert arrays or SimpleXML-Objects into an XML-String

  - by streetparade

  I want to create a xml from a given string, i have a function but i didn't wrote it.It seems a bit cryptical too. Can please some one review it and give me some Ideas, how it could be written clearer for everybody? /** * Converts arrays or SimpleXML-Objects into an XML-String * @params mixed Accepts an array or xml string with data to Post * @params integer DO NOT PROVIDE. Internal Usage for recursion only */ private function mixedDataToXML($data, $level = 1) { if(!$data){ return FALSE; } if(is_array($data)) { $xml = ''; if ($level==1) { $xml .= '<?xml version="1.0" encoding="ISO-8859-1"?>'."\n"; } foreach ($data as $key => $value) { $key = strtolower($key); if (is_array($value)) { $multi_tags = false; foreach($value as $key2=>$value2) { if (is_array($value2)) { $xml .= str_repeat("\t",$level)."<$key>\n"; $xml .= $this->mixedDataToXML($value2, $level+1); $xml .= str_repeat("\t",$level)."</$key>\n"; $multi_tags = true; } else { if (trim($value2)!='') { if (htmlspecialchars($value2)!=$value2) { $xml .= str_repeat("\t",$level). "<$key><![CDATA[$value2]]>". "</$key>\n"; } else { $xml .= str_repeat("\t",$level). "<$key>$value2</$key>\n"; } } $multi_tags = true; } } if (!$multi_tags and count($value)>0) { $xml .= str_repeat("\t",$level)."<$key>\n"; $xml .= $this->mixedDataToXML($value, $level+1); $xml .= str_repeat("\t",$level)."</$key>\n"; } } else { if (trim($value)!='') { if (htmlspecialchars($value)!=$value) { $xml .= str_repeat("\t",$level)."<$key>". "<![CDATA[$value]]></$key>\n"; } else { $xml .= str_repeat("\t",$level). "<$key>$value</$key>\n"; } } } } return $xml; }else{ return (string)$data; } }

  Read the article

• 10 PowerShell One Liners

  - by BizTalk Visionary

  Here are a few one-liners that use NetCmdlets. Some of these I've blogged about before, some are new. Let me know if you have questions, which ones you find useful, or how you altered these to suit your own needs. Send email to a list of recipient addresses: import-csv users.csv | % { send-email -to $_.email -from [email protected] -subject "Important Email" –message "Hello World!" -server 10.0.1.1 } Show the access control list for a specific Exchange folder: get-imap -server $mymailserver -cred $mycred -folder INBOX.RESUMES –acl Add look and read permissions on an Exchange folder, for a list of accounts pulled from a CSV file: import-csv users.csv | % { set-imap -server -acluser $_.username $mymailserver -cred $mycred -folder INBOX.RESUMES –acl “lr”  } Sync system time with an Internet time server: get-time -server clock.psu.edu –set To remotely sync the time on a set of computers: import-csv computers.csv | % { Invoke-Command -computerName $_.computer -cred $mycred -scriptblock { get-time -server clock.psu.edu –set } } Delete all emails from an Exchange folder that match a certain criteria.  For example, delete all emails from [email protected]: get-imap -server $mailserver –cred $mycred | ? {$_.FromEmail -eq [email protected]} | %{ set-imap -server $mailserver –cred $mycred-message $_.Id -delete } Update Twitter status from PowerShell: get-http –url "http://twitter.com/statuses/update.xml" –cred $mycred -variablename status -variablevalue "Tweeting with NetCmdlets!" A test-path that works over FTP, FTPS (SSL), and SFTP (SSH) connections: get-ftp -server $remoteserver –cred $mycred -path /remote/path/to/checkfor* Don't forget the *.  Also, to use SSL or SSH just add an –ssl or –ssh parameter. List disabled user accounts in Active Directory (or any other LDAP server): get-ldap -server $ad -cred $mycred -dn dc=yourdc -searchscope wholesubtree     -search "(&(objectclass=user)(objectclass=person)(company=*)(userAccountControl:1.2.840.113556.1.4.803:=2))" List Active Directory groups and their members: get-ldap -server testman -cred $mycred -dn dc=NS2 -searchscope wholesubtree -search "(&(objectclass=group)(cn=*admin*))" | select ResultDN, member Display the last initialization time (e.g. last reboot time) of all discoverable SNMP agents on a network: import-csv computers.csv | % { get-snmp -agent $_.computer -oid sysUpTime.0 | %{([datetime]::Now).AddSeconds(-($_.OIDValue/100))} } Not mentioned here:  data conversion (Yenc, QP, UUencoding, MD5, SHA1, base64, etc), DNS, News Groups (NNTP/UseNet), POP mail, RSS feeds, Amazon S3, Syslog, TFTP, TraceRoute, SNMP Traps, UDP, WebDAV, whois, Rexec/Rshell/Telnet, Zip files, sending IMs (Jabber/GoogleTalk/XMPP), sending text messages and pages, ping, and more. Original Source: Lance's Textbox

  Read the article

• Add a Cache Clearing Button to Firefox

  - by Asian Angel

  While emptying your browser’s cache may not be something that you need to worry with often or at all there are times when clearing it can be helpful. The Empty Cache Button extension lets you have instant on-demand cache clearing in Firefox. Some reasons why you might want or need to clear your browser’s cache: Clear out older (or out of date) versions of images, etc. from your favorite websites Free up disk space Clearing the cache may help fix browser behavior issues Help protect privacy (i.e. images, etc. displayed within a personal account) Before For our example we loaded three webpages in order to add content to our browser’s cache. Using the “CacheViewer” we were able to easily see the contents of our browser’s cache after the webpages finished loading. What if you need to clear your cache immediately without restarting your browser (if the options are set to empty the cache on browser exit)? Note: CacheViewer is available via a separate extension and can be found here. Empty Cache Button in Action Once you install the extension all that you need to do is right click on any of your browser’s toolbars and select “Customise”. Drag the “Toolbar Button” to an appropriate location in your browser’s UI and you are ready to go. To clear your browser’s cache simply click the button…that is all there is to it. When the cache is empty you will see this small message window appear in the lower right corner of your “Desktop”. Opening up the “CacheViewer” again shows that everything has been cleared out. Terrific! Conclusion If you ever find yourself needing to clear your browser’s cache immediately then the Empty Cache Button extension provides an easy way to do so without restarting your browser (if the options are set to empty the cache on browser exit). Links Download the Empty Cache Button extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Change SuperFetch to Only Cache System Boot Files in VistaTroubleshoot Browsing Issues by Reloading the DNS Client Cache in VistaSearch for Install Packages from the Ubuntu Command LineQuick Tip: Empty Internet Explorer 7 Cache when Browser is ClosedRemove the New Tab Button in Firefox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Use Quick Translator to Translate Text in 50 Languages (Firefox) Get Better Windows Search With UltraSearch Scan News With NY Times Article Skimmer SpeedyFox Claims to Speed up your Firefox Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone

  Read the article

• How to Assign a Static IP to an Ubuntu 10.04 Desktop Computer

  - by Mysticgeek

  If you have a home network with several computers, assigning them static IP addresses can make troubleshooting easier. Today we take a look at switching from DHCP to a static IP in Ubuntu. Assign a Static IP Using Static IPs prevents address conflicts between machines and can allow easier access to them. If you have a small home network and are satisfied with the machines getting their IP address automatically via DHCP, there won’t be anything gained by using static addresses. Using Static IPs isn’t necessarily for the average user, but if you’re a geek who wants to know the address assigned to each machine, it can allow for faster troubleshooting.  To change your Ubuntu machine to a Static IP go to System \ Preferences \ Network Connections. In our example, we’re on a wired system so click on the Wired tab, then select Auto eth0 and click on Edit. Select the IPv4 settings tab, change Method to Manual, click the Add button. Then type in the Static IP Address, Subnet Mask, DNS Servers, and Default Gateway. Then click Apply when you’re finished. Make sure to hit Enter after typing in the Default Gateway otherwise it will revert back to 0.0.0.0 You’ll need to enter in your admin password before the changes go into affect. To verify the changes have been made successfully launch a Terminal session and type in ifconfig at the command prompt, or follow these directions. You also might want to ping the address from another machine to make sure everything is communicating. If you want to assign a Static IP to your Windows machines, check out our article on how to assign a Static IP on Windows systems (make sure to browse the comments as our readers have some good suggestions).  Whether you have a small office or home network set up with a server and several machines, using a Static IP on each device can help you manage them easily. Again, it isn’t for everyone as it really depends on how your network is setup and the way you use it. Similar Articles Productive Geek Tips Change Ubuntu Desktop from DHCP to a Static IP AddressAllow Remote Control To Your Desktop On UbuntuAssign Custom Shortcut Keys on Ubuntu LinuxKeyboard Ninja: 21 Keyboard Shortcut ArticlesChange Ubuntu Server from DHCP to a Static IP Address TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server TubeSort: YouTube Playlist Organizer XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries

  Read the article

• How to Name Linked Servers

  - by Bill Graziano

  I did another SQL Server migration over the weekend that dealt with linked servers.  I’ve seen all kinds of odd naming schemes and there are a few I like and a few I suggest you avoid. Don’t name your linked server for its IP address.  At some point whatever is on the other end of that IP address will move.  You’ll probably need to point your linked server to a new IP address but not change the name of the linked server.  And then you’ve completely lost any context around this.  Bonus points if a new SQL Server eventually ends up at the old IP address further adding confusion when you’re trying to troubleshoot. Don’t name your linked server based on its instance name.  This one is less obvious.  It sounds nice to have a linked server named [VSRV1\SQLTRAN01].  You know what it is and it’s easy to use.  It’s less nice when you’ve got 200 stored procedures that all reference this linked server but the database they reference has moved to a new instance.  Now when you query this you’re actually querying a different instance. (Please note: I’m not saying it’s a good idea to have 200 stored procedures that all reference a linked server.  I’m just saying it’s not all that uncommon.) Consider naming your linked server something that you can easily search on.  See my note above.  You can also get around this by always enclosing the name in brackets.  That is harder to enforce unless you use some odd characters in it. Consider naming your linked server based on the function.  For example, I’ve had some luck having a linked server named [DW] that points to our data warehouse server.  That server can change names or physically move and all I need to do is update the linked server to point to the new destination.  The descriptive name of the linked server is still accurate.  No code needs to change and people still know what it is just by looking at it. Consider naming your linked server for the database.  I’m still thinking through this one.  It may mean you have multiple linked servers that point to the same instance.  I’ve found that database names rarely change.  It also makes it easier to move individual databases to new servers. Consider pointing your linked servers to DNS entries and not IP addresses.  I’ve done this for reporting databases and had some success.  Especially for read-only snapshots that can get created on the main database or on the mirror.  What issues have you had with linked server names?  What has worked for you?  Where are the holes in my approach?

  Read the article

• Asynchronous connectToServer

  - by Pavel Bucek

  Users of JSR-356 – Java API for WebSocket are probably familiar with WebSocketContainer#connectToServer method. This article will be about its usage and improvement which was introduce in recent Tyrus release. WebSocketContainer#connectToServer does what is says, it connects to WebSocketServerEndpoint deployed on some compliant container. It has two or three parameters (depends on which representation of client endpoint are you providing) and returns aSession. Returned Session represents WebSocket connection and you are instantly able to send messages, register MessageHandlers, etc. An issue might appear when you are trying to create responsive user interface and use this method – its execution blocks until Session is created which usually means some container needs to be started, DNS queried, connection created (it’s even more complicated when there is some proxy on the way), etc., so nothing which might be really considered as responsive. Trivial and correct solution is to do this in another thread and monitor the result, but.. why should users do that? :-) Tyrus now provides async* versions of all connectToServer methods, which performs only simple (=fast) check in the same thread and then fires a new one and performs all other tasks there. Return type of these methods is Future<Session>. List of added methods: public Future<Session> asyncConnectToServer(Class<?> annotatedEndpointClass, URI path) public Future<Session> asyncConnectToServer(Class<? extends Endpoint>  endpointClass, ClientEndpointConfig cec, URI path) public Future<Session> asyncConnectToServer(Endpoint endpointInstance, ClientEndpointConfig cec, URI path) public Future<Session> asyncConnectToServer(Object obj, URI path) As you can see, all connectToServer variants have its async* alternative. All these methods do throw DeploymentException, same as synchronous variants, but some of these errors cannot be thrown as a result of the first method call, so you might get it as the cause ofExecutionException thrown when Future<Session>.get() is called. Please let us know if you find these newly added methods useful or if you would like to change something (signature, functionality, …) – you can send us a comment to [email protected] or ping me personally. Related links: https://tyrus.java.net https://java.net/jira/browse/TYRUS/ https://github.com/tyrus-project/tyrus

  Read the article

• Advice for moving from custom domain hosted on blogspot to new custom domain on hosting provider [closed]

  - by Chan

  Need some advice :) a) Facts: 1. Currently, we have a blog www.thebigbigsky.net hosted on blogspot.com. The site has been up for around a year and google had cached some of the posts. 2. The idea for setting up the blog was to promote/share articles/write-up about personal development and self-growth, and also to offer counseling services related to them. 3. There is another subdomain - chinese.thebigbigsky.net hosting similar blog posts but in Chinese. This is hosted on blogspot as well. b) What we want to do: 1. We did some research on the internet and understood that, to make a website more popular, it is better to have a domain name that is related to the content of the site. Hence, in our case, a domain name containing "personal development" would be more ideal and easier for people to remember. 2. Hence, we are thinking to move away from blogspot to a meaningful new domain (example: personaldevelopmentwithxyz.com) and move all contents there. The new domain will be hosted on a hosting provider e.g. hostgator.com c) Here are the steps we have in mind: 1. Register the new domain (example: personaldevelopmentwithxyz.com) 2. Get a hosting provider hostgator.com 3. Setup a new site based on Wordpress, import all contents from existing blog to this new site - personaldevelopmentwithxyz.com. 4. Switch current blog back to thebigbigsky.blogspot.com 5. Switch DNS of www.thebigbigsky.net to point to the new site on hostgator.com 6. On hostgator.com, setup permanent redirect 301 of www.thebigbigsky.net to point to personaldevelopmetnwithxyz.com by following the tutorial mentioned here - http://www.blogbloke.com/migrating-redirecting-blogger-wordpress-htaccess-apache-best-method/ Questions: 1. Will it have major impact on the current google pagerank or SEO of thebigbigsky.net? As the site is not that popular, we assumed that the impact would not be a major one. 2. Is the domain personaldevelopmentwithxyz.com considered too long? (For SEO etc) 3. Steps c.4 and c.5 above - Will this work for our case? 4. How about the subdomain - chinese.thebigbigsky.net? We would like keep it as separate blog with the domain e.g. chinese.personaldevelopmentwithxyz.com 5. We added "facebook comments" to the existing post on www.thebigtbigsky.net and would not want to lose it. Will the comments still be there after we moved to the new domain? 6. Any better idea to do it? :) Thank you very much! regards, -chan

  Read the article

• how to start LXDE session automatically after tightvncserver starts to make me able see desktop when connecting to the host via vncclient?

  - by Oleksandr Dudchenko

  I have system which is equipped with Intel Celeron processor 1.1 GHz s370 with 384 Mb of RAM on Intel d815egew motherboard which supports wake-on-lan function. I want to use such a PC for Internet sharing to the local network. Also this PC is a DHCP+DNS server as well as router/gateway. Based on above I decided to install Lubuntu as it is lightweight system. I installed Lubuntu 10.04.4 LTS from alternate ISO. System has no auto login. System boots and has acceptable performance. Host PC has onboard 4 network adapters: eth0 – ethernet controller which is used for Local Network connections. Has static address 10.0.0.1 eth1 – ethernet controller which is not used and not configured so far, I plan to connect printer here later on. eth2 - ethernet controller which is used to connect to Internet, which we plan to share for the local network wlan0 – wireless controller, it is used in role of access poit for local Network and has address 10.0.0.2 We want to control our gateway remotely. So, we need to be able to power it on remotely. To allow this I’ve done the following things: $ cd /etc/init.d/ made a new file with command $ sudo vim wakeonlanconfig Wrote the following lines to the newly created file, saved and closed it #!/bin/bash ethtool -s eth0 wol g ethtool -s eth2 wol g exit Made the abovementioned file executable $ sudo chmod a+x wakeonlanconfig Then included it into autostart sequence during boot. $ sudo update-rc.d -f wakeonlanconfig defaults after system reboot we will be able to poweron system remotely. Than we need to have a possibility to connect remotely to the host via SSH and VNC. So, I installed following packets with the following commands: $ sudo apt-get update $ sudo apt-get install openssh-server tightvncserver Add ssh daemon into autostart sequence during boot. $ sudo update-rc.d -f ssh defaults Power off the host PC $ sudo halt Then I went to remote place, send magic paket and powered the Host up. System started... And I connected to the host via Putty from remote system under Windows. Than logged in and run the command to start vnc server. $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Using UltraVNC Viewer programm under windows I connected to the host's vnc server, enterd the password and.... sow only mouse cursor in form of cross on a grey background of 800x600 dots, no desktop. Here is my .vnc/xstartup file #!/bin/sh xrdb $HOME/.Xresources xsetroot -solid grey #x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & #x-window-manager & # Fix to make GNOME work export XKL_XMODMAP_DISABLE=1 /etc/X11/Xsession The Question: What I have to change and where to make LXDE session start automatically after tightvncserver starts?

  Read the article

• Virtual Lab part 2&ndash;Templates, Patterns, Baselines

  - by Geoff N. Hiten

  Once you have a good virtualization platform chosen, whether it is a desktop, server or laptop environment, the temptation is to build “X”.  “X” may be a SharePoint lab, a Virtual Cluster, an AD test environment or some other cool project that you really need RIGHT NOW.  That would be doing it wrong. My grandfather taught woodworking and cabinetmaking for twenty-seven years at a trade school in Alabama.  He was the first instructor hired at that school and the only teacher for the first two years.  His students built tables, chairs, and workbenches so the school could start its HVAC courses.   Visiting as a child, I also noticed many extra “helper” stands, benches, holders, and gadgets all built from wood.  What does that have to do with a virtual lab, you ask?  Well, that is the same approach you should take.  Build stuff that you will use.  Not for solving a particular problem, but to let the Virtual Lab be part of your normal troubleshooting toolkit. Start with basic copies of various Operating Systems.  Load and patch server and desktop OS environments.  This also helps build your collection of ISO files, another essential element of a virtual Lab.  Once you have these “baseline” images, you can use your Virtualization software’s snapshot capability to freeze the image.  Clone the snapshot and you have a brand new fully patched machine in mere moments.  You may have to sysprep some of the Microsoft OS environments if you are going to create a domain environment or experiment with clustering.  That is still much faster than loading and patching from scratch. So once you have a stock of raw materials (baseline images in this case) where should you start.  Again, my grandfather’s workshop gives us the answer.  In the shop it was workbenches and tables to hold large workpieces that made the equipment more useful.  In a Windows environment the same role falls to the fundamental network services:  DHCP, DNS, Active Directory, Routing, File Services, and Storage services.  Plan your internal network setup.  Build out an AD controller with all the features listed.  Make the actual domain an isolated domain so it will not care about where you take it.  Add the Microsoft iSCSI target.  Once you have this single system, you can leverage it for almost any network environment beyond a simple stand-alone system. Having these templates and fundamental infrastructure elements ready to run means I can build a quick lab in minutes instead of hours.  My solutions are well-tested, my processes fully documented with screenshots, and my plans validated well before I have to make any changes to client systems.  the work I put in is easily returned in increased value and client satisfaction.

  Read the article

• Setting up Ubuntu Server as a Router with DHCPD and 3 Ethernet devices

  - by cengbrecht

  My configuration: Ubuntu 12.04 DHCP3-server eth0, eth1, eth2 Edit: removed br0&br1 eth0 is the external connection eth1 & eth2 are the internal network eth1 and eth2 are supposed to be seperate networks of student/teachers respectivly. What I would like to have is the internet from external device bridged to device 1 and 2, with the DHCP server controlling the two internal devices. Its already working with DHCP, the part I am stuck on is bridging for internet. I have setup a script that I found here: Router With the original script he linked here: Ubuntu Router Guide echo -e "\n\nLoading simple rc.firewall-iptables version $FWVER..\n" IPTABLES=/sbin/iptables #IPTABLES=/usr/local/sbin/iptables DEPMOD=/sbin/depmod MODPROBE=/sbin/modprobe EXTIF="eth0" INTIF="eth1" INTIF2="eth2" echo " External Interface: $EXTIF" echo " Internal Interface: $INTIF" echo " Internal Interface: $INTIF2" EXTIP=`ifconfig $EXTIF | grep 'inet addr:' | sed 's#.*inet addr\:\([0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\).*#\1#g'` echo " External IP: $EXTIP" #====================================================================== #== No editing beyond this line is required for initial MASQ testing == The rest of the script below this is as is. I can get ip from the eth1 & eth2 devices, and my computer can see them, and them it, however, internet is not being passed through. If you need more information please just let me know. EDIT: So I had a 255.255.254.0 network, I believe that was causing the issue. Not sure if it will matter on the second card, I will test later. After changing the subnet to 255.255.255.0 the pings will pass through, however, I cannot get DNS requests to pass? My new Config for Firewall Rules # /etc/iptables.up.rules # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *mangle :PREROUTING ACCEPT [39:4283] :INPUT ACCEPT [39:4283] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [12:4884] :POSTROUTING ACCEPT [13:5145] COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *filter :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A FORWARD -j LOG -A FORWARD -m state -i eth1 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth2 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth1 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth2 --state NEW,ESTABLISHED,RELATED -j ACCEPT COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *nat :INPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j SNAT --to-source 192.168.1.25 COMMIT # Completed on Wed Nov 28 19:43:28 2012 Not sure what else you may need, but I am using Webmin to control the server(Needed for the operators on site to know how to use it.) If you could explain it as standard CLI commands, or edits to this file directly then we should be ok. :) And thanks again Erik, I do believe your edits did help.

  Read the article

• RIM's current BB7 developer toolset is a joke

  - by mbrit

  tl;dr - RIM's current developer toolset is not fit for purpose.Background to this is that I'm currently working on a PhoneGap/Cordova project for a client that has to run on BlackBerry. The tooling is so ridiculous to use that even though I had a gentle dig at them in a Guardian piece it's worth having a more full-on attack.At the moment, RIM's pitch is that apps are built for the current BBOS7 devices using WebWorks. This is an HTML-based toolset. Essentially a browser is spun up in a native app container and your app is powered by JavaScript. Specific JavaScript libraries exist that thunk down to native capabilities no the device. I happen to use PhoneCap/Cordova in combination with this.The tooling is non-existent. I'm using TextMate, Ant, and Terminal to develop the app. There's no "console.log" output, and no debugging. The only way to instrument the app is to put "alert" calls in your code.Apart from the fact that that's *not* fine in 2012, how about this… every time you deploy a new app to the device, the device has to reboot. This process takes six minutes on a relatively modern BlackBerry device. How about this as well - in order to get a file into the package it has to be signed. My small app over here has 100 different files (75 or so generated). Signing doesn't happen locally, it happens on RIM's servers in Waterloo. Thus whenever you deploy the app you have this utility have to call RIM's servers 100 times. More to the point, sometimes during the day these servers have "micro-downtime" moments where they're unreachable for five or ten minutes, normally two or three times a day. Oh yes, you'll also get an email sent to you per signing on success or failure. 100 inbound emails, per deployment.(I started this post at the beginning of one of these cycles, by the way. That's how long it takes to build and deploy *once*. By the way, the change I made didn't work.)To clarify:* Change the script,* Build it using Ant,* Ant will spin up a Java app that talks to RIM's servers to sign it.* Receive 100 emails, assuming the server is up.* App deployed - takes about 30 seconds.* BlackBerry device restarts - takes about six minutes.* Find and open the app. Go through security prompts.* Test the app, with no "console.log" output and no debugger."Why not use the simulator?" I hear you ask. Well, apart from the fact that the simulator refused to reach any network service over HTTPS that I happen to own? (Some people suggest changing DNS settings for this known issue.) Admittedly, the simulator does show you console.log, but you still have the "six minute" restart issue on the simulator.Developers will understand this problem. Breaking concentration for six-plus minutes every time you want to deploy an app turns developing into a nightmare. Combining that with no worthy debugging tools turns the toolset into a joke.

  Read the article

• How to run a local and external website on same computer with 2 NIC's, 2 Routers and 3 seperate networks?

  - by CandN

  Hello and hopefully I can get some answers to my question, though I think I'm making it more complicated for myself than it has to be. My business is a used auto dealership, and I'm in the process of connecting it to the world - via ethernet from the business server [running Xubuntu] to the ISP's ethernet router/modem, so that I can host our own website (no more than 5-10 people probably visiting at any time - mainly paying their bill), as well as set up a web based internal-intranet site - via DD-WRT Router on the 2nd NIC on the business server - that'll be accessed over Wifi from employees personal devices. On the other end of this is trying to offer free wifi to customers that is completely seperate of the 2 mentioned above networks. Quick Rundown: 1. Web Site for Customers to access. I'm going to use no-ip.org for DNS for the moment being, so I'll have a site that customers can access from anywhere in the world at "mybiz.no-ip.org". This will be forwarded to NIC #1 on the server, possibly at an address like "108.69.." as its being provided an IP from the ISP's modem/router, that is from Time Warner, and they allow NO! configuration options. Web Site for employees to access. I'm trying not to use the server too much as a desktop, only for critical situations, so having a backend thats seperate from the front-facing website is critical. This will be the DD-WRT router hardwired into NIC #2 on the server. This WiFi will be password accessible. Public WiFi for customers. The DD-WRT can seperate networks if I'm correct, I just can't seem to understand how to seperate the 2 and still have internet access on both. I've done it before, but the "Public" wifi (with no password set to connect) kept dropping the connection like a problem was happening that I couldn't figure out. So if I could do a little drawing, this is how it would/should possibly look. ISP -- [Sends Public Facing IP of 108.69.*.1/8] -- ISP Modem Router ISP Modem Router (Ethernet Only) -- [Gives Private IP 108.69.*.2] -- Server NIC #1 Server NIC #1 -- [Gives Private IP 108.69.*.3] -- DD-WRT Router DD-WRT Router -- [DHCP Enabled Giving IP's 172.16.0.0/16] -- Employees Network | | --------- [DHCP Enabled Giving IP's 192.168.1.0/24] -- Public WIFI Hope it's not too confusing, but it anyone could give me some good direct tutorials on how to accomplish this, or if YOU know, then it'll be alot of help. Thanks to all in advance. Need anything else to be explained? Don't hesitate to ask! *Using The LAMP stack with Webmin/VirtualMin -Customer site is located in /var/www2/ -Private Employees site is located in /var/www/ Using no-ip.org's dynamic client updater

  Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >