Search Results

Search found 7570 results on 303 pages for 'doug hope'.

Page 180/303 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

• Can't get Wireless RT2x00usb driver to work, and can't blacklist it

  - by TheLQ

  After a two year hiatus to Linux, I try it again out again. And then I run into to driver issues... I have an old Linksys WUSB54G v4 Wireless USB Adapter. In previous versions I had to use a combination of Ndiswrapper and Wicd to hope of getting it working. In 10.10, apparently there are built in drivers for it. Unfortunately they don't work. Fails to connect to my WPA network, fails to connect to my open unencrypted network. Wicd fails at "Obtaining IP address" or when using static IPs fails at verifying connectivity to network. Getting fed up I tried the ndiswrapper approach. Installed and configured, but still not working, even when blacklisting the rt2570 module. So for some debugging I added some lines to my /etc/modprobe.d/blacklist.conf file blacklist rt2570 blacklist prism54usb blacklist rt2x00lib blacklist rt2x00usb Restart and find this: lordquackstar@quackbeast:/etc/modprobe.d$ lsmod | grep rt2 rt2500usb 18049 0 rt2x00usb 9779 1 rt2500usb rt2x00lib 27275 2 rt2500usb,rt2x00usb led_class 2633 1 rt2x00lib mac80211 231541 2 rt2x00usb,rt2x00lib cfg80211 144470 2 rt2x00lib,mac80211 Seems to be ignored... Tried this: lordquackstar@quackbeast:/etc/modprobe.d$ sudo rmmod -f rt2x00usb ERROR: Removing 'rt2x00usb': Resource temporarily unavailable lordquackstar@quackbeast:/etc/modprobe.d$ sudo rmmod -f rt2x00lib ERROR: Removing 'rt2x00lib': Resource temporarily unavailable and couldn't connect. Restarted and was back to the same modules loading. Maybe there's something in the log: lordquackstar@quackbeast:/etc/modprobe.d$ tail -n100000 /var/log/syslog | grep rt2 Dec 13 19:01:15 quackbeast kernel: [ 23.698056] Registered led device: rt2500usb-phy0::radio Dec 13 19:01:15 quackbeast kernel: [ 23.698140] Registered led device: rt2500usb-phy0::quality Dec 13 19:01:15 quackbeast kernel: [ 23.701680] usbcore: registered new interface driver rt2500usb Dec 13 19:01:15 quackbeast NetworkManager[855]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2500usb' ifindex: 4) Dec 13 19:17:47 quackbeast kernel: [ 23.521759] Registered led device: rt2500usb-phy0::radio Dec 13 19:17:47 quackbeast kernel: [ 23.521824] Registered led device: rt2500usb-phy0::quality Dec 13 19:17:47 quackbeast kernel: [ 23.524740] usbcore: registered new interface driver rt2500usb Dec 13 19:17:47 quackbeast NetworkManager[798]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2500usb' ifindex: 4) Seems to be autoloading. So this means that even if I pull it out, remove the module, and get it working, it still won't work when its plugged in all the time. More info: lordquackstar@quackbeast:/etc/modprobe.d$ sudo lshw -C Network *SNIP* *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:12:17:9b:f3:1e capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=2.6.35-24-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg USB: lordquackstar@quackbeast:/etc/modprobe.d$ lsusb | grep -i rt Bus 001 Device 003: ID 13b1:000d Linksys WUSB54G v4 802.11g Adapter [Ralink RT2500USB] Any suggestions on how to either fix the rt2x00usb driver or permanently block it from loading? Note that I already have ndiswrapper installed

  Read the article

• SCCM 2007 Collections per OU

  - by VirtualizeIT

  Recently I wanted to create our SCCM collections setup as our Active Directory structure. I finally figured out how to create collections per OU of the domain. I decided to create a simple tutorial that may help other IT professionals the steps to complete this task.   1. Open the ConfigMgr and navigation to the collections. To navigate to the collections go to Site Database>Computer Management>Collections. 2. In the ‘Collections’ right-click and select New Collections. Then it will pop up a Wizards so you can enter the name of the collection and any notes that you may want to add that is associated with the collection.                       3. Next, select the database icon. In the ‘Name’ textbox enter the name of the query. I named mine ‘Query’ just for simplicity sake. After you enter the name select ‘Edit Query Statement…’ 4. Select the ‘Criteria’ tab 5. Select the icon that looks like a sun. 6. At this point you should see a dialog box like this…                     7. Next, click the ‘select’ button. 8. Under the ‘Attribute class’ scroll through until you see ’System Resource’ and for the ‘Attribute"’ scroll through you see ‘System OU Name’. It should look something like this…                 9. After that select OK. 10. In the ‘Value’ textbox enter the string that is associated with the OU in your domain. NOTE: If you don’t know your string name for your OU you can simply go to “Active Directory Users and Computers” and right-click on the OU and select properties. In the ‘object’ tab you should see the string under the ‘Canonical name of object”. That is the string that you put in the ‘Value’ text box. 11. After you enter the OU string name press OK>OK>OK>NEXT>NEXT>FINISH.   That’s it!   I hope this tutorial has help you understand how to create a collection through your OU structure.

  Read the article

• No sound after clean install 11.10

  - by Jorge

  First of all, sorry to ask this, I'm sure that this was asked so many times before. Second, sorry for the English, it's not my native language. And Third, thank you in advance. So, I hope the follow info will help, here's a log. http://www.alsa-project.org/db/?f=07089caf530494bc4bc23e1d1cd56b3a5fae03c6 I already check 'System - Preferences - Sound'. Here's a screenshot http://i.imgur.com/Ghwnj.png > jorge@jorge-desktop:~$ sudo lshw -class multimedia > *-multimedia > description: Multimedia audio controller > product: VT8233/A/8235/8237 AC97 Audio Controller > vendor: VIA Technologies, Inc. > physical id: 11.5 > bus info: pci@0000:00:11.5 > version: 60 > width: 32 bits > clock: 33MHz > capabilities: pm cap_list > configuration: driver=VIA 82xx Audio latency=0 > resources: irq:22 ioport:e400(size=256) Tried with no results: > sudo apt-get remove --purge alsa-base > sudo apt-get remove --purge pulseaudio > sudo apt-get clean && sudo apt-get autoremove > sudo apt-get install alsa-base > sudo apt-get install pulseaudio > sudo apt-get install ubuntu-desktop Also > sudo gedit /etc/default/grub > > from: > > GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" > > to: > > GRUB_CMDLINE_LINUX_DEFAULT="quiet splash radeon.audio=1" > > sudo update-grub > > And Reboot... without any result. EDIT: I made sure that everything it's fine with aplay -l and lspci -v and lsmod; and checked alsamixer, it's not in mute. Well I'm running out of ideas. Thanks.

  Read the article

• Export all SSIS packages from msdb using Powershell

  - by jamiet

  Have you ever wanted to dump all the SSIS packages stored in msdb out to files? Of course you have, who wouldn’t? Right? Well, at least one person does because this was the subject of a thread (save all ssis packages to file) on the SSIS forum earlier today. Some of you may have already figured out a way of doing this but for those that haven’t here is a nifty little script that will do it for you and it uses our favourite jack-of-all tools … Powershell!!   Imagine I have the following package folder structure on my Integration Services server (i.e. in [msdb]): There are two packages in there called “20110111 Chaining Expression components” & “Package”, I want to export those two packages into a folder structure that mirrors that in [msdb]. Here is the Powershell script that will do that:   Param($SQLInstance = "localhost") #####Add all the SQL goodies (including Invoke-Sqlcmd)##### add-pssnapin sqlserverprovidersnapin100 -ErrorAction SilentlyContinue add-pssnapin sqlservercmdletsnapin100 -ErrorAction SilentlyContinue cls $Packages = Invoke-Sqlcmd -MaxCharLength 10000000 -ServerInstance $SQLInstance -Query "WITH cte AS ( SELECT cast(foldername as varchar(max)) as folderpath, folderid FROM msdb..sysssispackagefolders WHERE parentfolderid = '00000000-0000-0000-0000-000000000000' UNION ALL SELECT cast(c.folderpath + '\' + f.foldername as varchar(max)), f.folderid FROM msdb..sysssispackagefolders f INNER JOIN cte c ON c.folderid = f.parentfolderid ) SELECT c.folderpath,p.name,CAST(CAST(packagedata AS VARBINARY(MAX)) AS VARCHAR(MAX)) as pkg FROM cte c INNER JOIN msdb..sysssispackages p ON c.folderid = p.folderid WHERE c.folderpath NOT LIKE 'Data Collector%'" Foreach ($pkg in $Packages) { $pkgName = $Pkg.name $folderPath = $Pkg.folderpath $fullfolderPath = "c:\temp\$folderPath\" if(!(test-path -path $fullfolderPath)) { mkdir $fullfolderPath | Out-Null } $pkg.pkg | Out-File -Force -encoding ascii -FilePath "$fullfolderPath\$pkgName.dtsx" }   To run it simply change the “localhost” parameter of the server you want to connect to either by editing the script or passing it in when the script is executed. It will create the folder structure in C:\Temp (which you can also easily change if you so wish – just edit the script accordingly). Here’s the folder structure that it created for me: Notice how it is a mirror of the folder structure in [msdb]. Hope this is useful! @Jamiet

  Read the article

• SQL SERVER – SSAS – Multidimensional Space Terms and Explanation

  - by pinaldave

  I was presenting on SQL Server session at one of the Tech Ed On Road event in India. I was asked very interesting question during ‘Stump the Speaker‘ session. I am sharing the same with all of you over here. Question: Can you tell me in simple words what is dimension, member and other terms of multidimensional space? There is no simple example for it. This is extreme fundamental question if you know Analysis Service. Those who have no exposure to the same and have not yet started on this subject, may find it a bit difficult. I really liked his question so I decided to answer him there as well blog about the same over here. Answer: Here are the most important terms of multidimensional space – dimension, member, value, attribute and size. Dimension – It describes the point of interests for analysis. Member – It is one of the point of interests in the dimension. Value – It uniquely describes the member. Attribute – It is collection of multiple members. Size – It is total numbers for any dimension. Let us understand this further detail taking example of any space. I am going to take example of distance as a space in our example. Dimension – Distance is a dimension for us. Member – Kilometer – We can measure distance in Kilometer. Value – 4 – We can measure distance in the kilometer unit and the value of the unit can be 4. Attribute – Kilometer, Miles, Meter – The complete set of members is called attribute. Size – 100 KM – The maximum size decided for the dimension is called size. The same example can be also defined by using time space. Here is the example using time space. Dimension – Time Member – Date Value – 25 Attribute – 1, 2, 3…31 Size – 31 I hope it is clear enough that what are various multidimensional space and its terms. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Business Intelligence, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• JUDCon 2013 Trip Report

  - by reza_rahman

  JUDCon (JBoss Users and Developers Conference) 2013 was held in historic Boston on June 9-11 at the Hynes Convention Center. JUDCon is the largest get together for the JBoss community, has gone global in recent years but has it's roots in Boston. The JBoss folks graciously accepted a Java EE 7 talk from me and actually referenced my talk in their own sessions. I am proud to say this is my third time speaking at JUDCon/the Red Hat Summit over the years (this was the first time on behalf of Oracle). I had great company with many of the rock stars of the JBoss ecosystem speaking such as Lincoln Baxter, Jay Balunas, Gavin King, Mark Proctor, Andrew Lee Rubinger, Emmanuel Bernard and Pete Muir. Notably missing from JUDCon were Bill Burke, Burr Sutter, Aslak Knutsen and Dan Allen. Topics included Java EE, Forge, Arquillian, AeroGear, OpenShift, WildFly, Errai/GWT, NoSQL, Drools, jBPM, OpenJDK, Apache Camel and JBoss Tools/Eclipse. My session titled "JavaEE.Next(): Java EE 7, 8, and Beyond" went very well and it was a full house. This is our main talk covering the changes in JMS 2, the Java API for WebSocket (JSR 356), the Java API for JSON Processing (JSON-P), JAX-RS 2, JPA 2.1, JTA 1.2, JSF 2.2, Java Batch, Bean Validation 1.1, Java EE Concurrency and the rest of the APIs in Java EE 7. I also briefly talked about the possibilities for Java EE 8. The slides for the talk are here: JavaEE.Next(): Java EE 7, 8, and Beyond from reza_rahman Besides presenting my talk, it was great to catch up with the JBoss gang and attend a few interesting sessions. On Sunday night I went to one of my favorite hangouts in Boston - the exalted Middle East Club as Rolling Stone refers to it (other cool spots in an otherwise pretty boring town is "the Church"). As contradictory as it might sound to the uninitiated, the Middle East Club is possibly the best place in Boston to simultaneously get great Middle Eastern (primarily Lebanese) food and great underground metal. For folks with a bit more exposure, this is probably not contradictory at all given bands like Acrassicauda and documentaries like Heavy Metal in Baghdad. Luckily for me they were featuring a few local Thrash metal bands from the greater Boston area. It wasn't too bad considering it was primarily amateur twenty-something guys (although I'm not sure I'm a qualified critic any more since I all but stopped playing about at that age). It's great Boston has the Middle East as an incubator to keep the rock, metal, folk, jazz, blues and indie scene alive. I definitely enjoyed JUDCon/Boston and hope to be part of the conference next year again.

  Read the article

• Data Structures usage and motivational aspects

  - by Aubergine

  For long student life I was always wondering why there are so many of them yet there seems to be lack of usage at all in many of them. The opinion didn't really change when I got a job. We have brilliant books on what they are and their complexities, but I never encounter resources which would actually give a good hint of practical usage. I perfectly understand that I have to look at problem , analyse required operations, look for data structure that does them efficiently. However in practice I never do that, not because of human laziness syndrome, but because when it comes to work I acknowledge time priority over self-development. Over time I thought that when I would be better developer I will automatically use more of them - that didn't happen at all or maybe I just didn't. Then I found that the colleagues usually in the same plate as me - knowing more or less some three of data structures and being totally happy about it and refusing to discuss this matter further with me, coming back to conversations about 'cool new languages' 'libraries that do jobs for you' and the joy to work under scrumban etc. I am stuck with ArrayLists, Arrays and SortedMap , which no matter what I do always suffice or either I tweak them to be capable of fulfilling my task. Yes, it might be inefficient but do we really have to care if Intel increases performance over years no matter if we improve our skills? Does new Xeon or IBM machines really care what we use? What if I like build things, but I am not particularly excited whether it is n log(n) or just n? Over twenty years the processing power increased enormously, which gives us freedom of not being critical about which one to use? On top of that new more optimized languages appear which support multiple cores more efficiently. To be more specific: I would like to find motivational material on complex real areas/cases of possible effective usages of data structures. I would be really grateful if you would provide relevant resources. There is similar question ,but in the end the links again mostly describe or do dumb example(vehicles, students or holy grail quest - yes, very relevant) them and people keep referring to the "scenario decides the data structure to use". I want to know these complex scenarios to be able to identify similarities to my scenario and then use them. The complex scenarios where it really matters and not necessarily of quantitive nature. It seems that data structures only concern is efficiency and nothing else? There seems to be no particular convenience for developer in use one over another. (only when I found scientific resources on why exactly simple carbohydrates are evil I stopped eating sugar and candies completely replacing it with less harmful fruits - I hope you can see the analogy)

  Read the article

• Domain Models (PHP)

  - by Calum Bulmer

  I have been programming in PHP for several years and have, in the past, adopted methods of my own to handle data within my applications. I have built my own MVC, in the past, and have a reasonable understanding of OOP within php but I know my implementation needs some serious work. In the past I have used an is-a relationship between a model and a database table. I now know after doing some research that this is not really the best way forward. As far as I understand it I should create models that don't really care about the underlying database (or whatever storage mechanism is to be used) but only care about their actions and their data. From this I have established that I can create models of lets say for example a Person an this person object could have some Children (human children) that are also Person objects held in an array (with addPerson and removePerson methods, accepting a Person object). I could then create a PersonMapper that I could use to get a Person with a specific 'id', or to save a Person. This could then lookup the relationship data in a lookup table and create the associated child objects for the Person that has been requested (if there are any) and likewise save the data in the lookup table on the save command. This is now pushing the limits to my knowledge..... What if I wanted to model a building with different levels and different rooms within those levels? What if I wanted to place some items in those rooms? Would I create a class for building, level, room and item with the following structure. building can have 1 or many level objects held in an array level can have 1 or many room objects held in an array room can have 1 or many item objects held in an array and mappers for each class with higher level mappers using the child mappers to populate the arrays (either on request of the top level object or lazy load on request) This seems to tightly couple the different objects albeit in one direction (ie. a floor does not need to be in a building but a building can have levels) Is this the correct way to go about things? Within the view I am wanting to show a building with an option to select a level and then show the level with an option to select a room etc.. but I may also want to show a tree like structure of items in the building and what level and room they are in. I hope this makes sense. I am just struggling with the concept of nesting objects within each other when the general concept of oop seems to be to separate things. If someone can help it would be really useful. Many thanks

  Read the article

• How to fix 'grub error file not found' when installing 12.04?

  - by Tomasz Grabowski

  i'm trying to install Ubuntu. I don't know if it is important, but i'm trying to install it on external HDD. In the end i have external bootable HDD which only displays: error: file not found grub recovery> From the beginning: I've downloaded ubuntu-12.04-desktop-i386.iso I've used LiLi USB Creator (LinuxLive) to create bootable pendrive from that image I've bootet from it, it works I've clicked "Try ubuntu", it works too. I've used GParted to look over drivers (disks) My primary embedded disk is seen as /dev/sda My attached external disk as /dev/sdb My PenDrive as /dev/sdc I've created partitions on /dev/sdb Fist partition for system (over 200GiB) Second was there already (it's xsf, and i don't want to touch it :P) Third is extended partition, with 1 locital partiton (10GiB) for swap I've started installation i've choose "somethin else" in ... i belive secound screeb then is selected /dev/sdb as boot disk for first partiton of /dev/sdb i set i want ext3 file system, i've check "formattin" checkbox, and mount path set to "/" firs logical partiton set as swap partition After installation finished, i restarted my computer. When i boot from my primary disc it's work ok, my previous operating system - vista - works ok. When i set my BIOS to boot from my external disc, i only get that message: error: file not found grub recovery> I've try to reinstall it, but didn't help... In desperation, i've try to read a bit about that "grub recovery" command-line and experiment a bit... I'm not sure if this has had any point, or if it give you some information (notice, that i don't know what i'm doing :P ) when i've type command: insmod (hd1,1)/boot/grub/linux.mod i've get message: unknown filesystem the same with: insmod (hd1,msdos1)/boot/grub/linux.mod the same with: insmod ext3 but i get no message after command: insmod ext2 ... notice that i really don't know what this command exactly do, but than i thought that maybe if i reinstall ubuntu with ext2 filesystem, it will work. I've done that, but symptoms are the same. I've go back to that Live version of ubuntu, filesystem and basics directories seems to be present on /dev/sdb1 ... i'm completely unfamiliar with GRUB. I'm also don't know which wersion of GRUB it is, i hope there is only one version on ubuntu-12.04-desktop-i386.iso Any help? Thax

  Read the article

• You're Invited to a TEAM Informatics Webinar

  - by Christie Flanagan

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The following is a guest post by Wayne Boerger, Product Manager at TEAM Informatics, an Oracle partner. TEAM Informatics is a key Oracle partner in the WebCenter space. For the last 13 years, we have been constantly focused on adding value to your Oracle WebCenter investment and most recently, customers have been asking how they can take advantage of the Web Experience Management capabilities in WebCenter Sites.  TEAM is happy to announce the WebCenter Sites Connector, which allows you to continue to use WebCenter Content as your strategic enterprise repository for unstructured content while also using that content within the WebCenter Sites delivery model.  Taking advantage of both best-of-breed tools will supercharge your web marketing and streamline your workflow for getting you there.On Tuesday, March 27, TEAM is hosting a webinar to provide more details about why it’s a great time to move forward with WebCenter Sites and TEAM’s WebCenter Sites Connector.  Choose from one of two sessions to fit your schedule.  Hope to see you there!!Session 1 – March 27, 10 AM CDT/8 AM PDT – Register HERE.Session 2 – March 27, 5 PM CDT/ 3 PM PDT – Register HERE.

  Read the article

• Mobile Shopping Alerts

  - by David Dorf

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} It’s been popular to offer coupons when people check-in to a store, because you’re catching them at the best possible time – they’re presumably in a shopping state-of-mind, and they’re at your store.  But wouldn’t it be even better to catch the people walking by your store and entice them to visit?  That’s the concept of geo-fences.  When people enter a geographic zone, they are sent a relevant text message alerting them about something nearby. I wrote about Placecast doing this for The North Face, noting that the messages were a unique combination of both offers and useful information about outdoor activities. After creating a program with European carrier O2, Placecast recently entered into an agreement to provide similar services to AT&T customers.  The ShopAlerts program allows AT&T customers in Chicago, Los Angeles, New York City, and San Francisco opt-in to receive these messages.  The program will be expanded nationwide as early as this summer. It’s a much better model for customers (and Placecast) to sign-up once with the carrier instead of each individual retailer, but I hope the messages aren’t restricted to advertising.  I really the like the idea of providing other information, such as nearby special events, races, and perhaps even things to avoid like construction.

  Read the article

• ADF Mobile @ Oracle Open World 2012 - A Look Back...

  - by Joe Huang

  Hi, everyone: It's been a little over two weeks since the end of Oracle Open World 2012, and hope everyone has recovered sufficiently.  We have seen a tremendous amount of coverage on Oracle ADF Mobile during this Oracle Open World.  For starters, ADF Mobile demo booth was positioned in the Oracle Red Lounge in Moscone North, where all new and innovative technologies are being demonstrated.  The booth is liternally out front and the first booth in the area, and we had a lot of interested attendees talking to us.  It feels like ADF Mobile has finally arrived on the big stage. There are numerous sessions and hands on labs that covers ADF Mobile.  Details can be found in Oracle Open World page.   The Oracle Cloud: Oracle's Cloud Platofrm and Application Strategy by Thomas Kurian (Keynote) Near the beginning of the keynote, showing a great analytics application built using ADF Mobile  Oracle Fusion Middleware Strategies Driving Business Innovation by Hasan Rizvi (Keynote) The Future of Development for Oracle Fusion—From Desktop to Mobile to Cloud by Chris Tonas (General Session) Co-presented with Accenture, an ADF Mobile Beta Partner Extend Oracle Fusion Apps to Tablets/Smartphones with Oracle Mobile Technology (General Session) Extend Oracle Applications to Mobile Devices with Oracle’s Mobile Technologies (General Session) Building Mobile Applications with Oracle Cloud (General Session) Mobile-Enable Oracle Fusion Middleware and Enterprise Applications with Oracle ADF (Conference Session) Co-presented with Infosys, an ADF Mobile Beta Partner Develop On-Device iPhone and iPad Apps Without Writing Any Objective-C Code (Oracle Develop Session) Mobile Apps for Oracle E-Business Suite with Oracle ADF Mobile and Oracle SOA Suite (Conference Session) Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile (Hands on Lab) This lab was repeated 8 (!) times Build Mobile Applications for Oracle E-business Suite (Hands on Lab) It was an extremely busy Open World for the team, and we were in the middle of trying to release ADF Mobile!   By far, the most memorable event during Open World was the ADF Meett Up at the OTN Lounge, where beers were flowing (for a little while) and familiar names are finally matched with faces.  We also appreciate the opportunity to interview the attendees from New Caledonia - sorry we probably surprised you with the video record, and many thanks for coming through for us. I also want to thank my fellow ADF Mobile and Fusion Middleware team members - from product managers, engineers, and product marketing, everyone worked extremely hard to make this Open World a great success for ADF Mobile. I really enjoyed meeting everyone at Oracle Open World, at the booth, sessions, etc.   Now it's on to release ADF Mobile - for real! Thanks, Joe Huang PS: If this thread shows up on your RSS feed, please keep watching...

  Read the article

• Broken package after update: linux-headers, error brokencount >0

  - by escozul

  Ubuntu 12.04. After an update, I get a red warning icon in the system tray, warning about an error: broken count 0 Opening Update manager, I see that the broken package is linux-headers-3.2.0-33-generic-pae (new install) Specificaly I have my ubuntu on an AspireOne with 8gb internal storage. I tried apt-get clean as suggested in another question on this site, and tried reinstalling the package in Synaptic. I have tried to reboot but to no avail. I have also tried apt-get install --fix-broken and I get the following: sudo apt-get install --fix-broken [sudo] password for elina: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: linux-headers-3.2.0-33-generic-pae The following NEW packages will be installed: linux-headers-3.2.0-33-generic-pae 0 upgraded, 1 newly installed, 0 to remove and 38 not upgraded. 1 not fully installed or removed. Need to get 0 B/977 kB of archives. After this operation 11,3 MB of additional disk space will be used. Do you want to continue [Y/n]; y (Reading database ... 437051 files and directories currently installed.) Unpacking linux-headers-3.2.0-33-generic-pae (from .../linux-headers-3.2.0-33-generic-pae_3.2.0-33.52_i386.deb) ... dpkg: error processing /var/cache/apt/archives/linux-headers-3.2.0-33-generic-pae_3.2.0-33.52_i386.deb (--unpack): unable to create `/usr/src/linux-headers-3.2.0-33-generic-pae/include/config/usb/gspca/sonixb.h.dpkg-new' (while processing `./usr/src/linux-headers-3.2.0-33-generic-pae/include/config/usb/gspca/sonixb.h'): No space left on device No apport report written because the error message indicates a disk full error dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/linux-headers-3.2.0-33-generic-pae_3.2.0-33.52_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I've tried all suggestions I could find: sudo apt-get clean sudo apt-get autoclean sudo apt-get autoremove sudo apt-get update sudo apt-get upgrade sudo apt-get -f install sudo apt-get install --fix-broken Then I saw that on the error there was a mention about free space. So I did a df -h and the result was: Filesystem Size Used Avail Use% Mounted on /dev/sda1 7,0G 5,5G 1,1G 84% / udev 235M 4,0K 235M 1% /dev tmpfs 97M 816K 96M 1% /run none 5,0M 0 5,0M 0% /run/lock none 242M 352K 242M 1% /run/shm I see that on my root folder I have 1.1Gb free. The broken package is linux-headers-3.2.0-33-generic-pae_3.2.0-33.52_i386.deb which only takes up 11.3Mb on my hard drive. I'm soooo lost. I really hope there is something I'm missing here. I don't want to go about reformatting this bucket. It's really not worth the time. Any help for fixing this would be hot.

  Read the article

• box2d resize bodies arround point

  - by philipp

  I have a compound object, consisting of a b2Body, vector-graphics and a list polygons which describe the b2body's shapes. This object has its own transformation matrix to centralize the storage of transformations. So far everything is working quiet fine, even scaling works, but not if i scale around a point. In the initialization phase of the object it is scaled around a point. This happens in this order: transform the main matrix transform the vector graphics and the polygons recreate the b2Body After this function ran, the shapes and all the graphics are exactly where they should be, BUT: after the first steps of the b2World the graphical stuff moves away from the body. When I ran the debugger I found out that the position of the body is 0/0 the red dot shows the center of scaling. the first image shows the basic setup and the second the final position of the graphics. This distance stays constant for the rest of the simulation. If I set the position via myBody.SetPosition( sx, sy ); the whole scenario just plays a bit more distant for the origin. Any Idea how to fix this? EDIT:: I came deeper down to the problem and it lies in the fact that i must not scale the transform matrix for the b2body shapes around the center, but set the b2body's position back to the point after scaling. But how can I calculate that point? EDIT 2 :: I came ever deeper down to it, even solved it, but this is a slow solution and i hope that there is somebody who understands what formula I need. assuming to have a set polygons relative to an origin as basis shapes for a b2body: scaling the whole object around a certain point is done in the following steps: i scale everything around the center except the polygons i create a clone of the polygons matrix i scale this clone around the point i calculate dx, dy as difference of clone.tx - original.tx and clone.ty - original.ty i scale the original polygon matrix NOT around the point i recreate the body i create the fixture i set the position of the body to dx and dy done! So what i an interested in is a formula for dx and dy without cloning matrices, scaling the clone around a point, getting dx and dy and finally scale the vertex matrix.

  Read the article

• New computer hangs on shutdown/reboot, how to troubleshoot?

  - by torbengb

  Summary: My machine hangs on shutdown/restart: all windows and the menu bar disappear but the desktop wallpaper remains, and it stays like that without disk activity forever (hours). It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown text. How can I troubleshoot this? Details: I've just received a new nettop computer (Acer Aspire Revo 3700: CPU:Atom D525, GPU:Nvidia ION2). I've just made a clean install of Ubuntu 10.10 using the standard USB pendrive method. The machine boots okay and works OK including WLAN and audio, but the graphics are not OK. Ubuntu offered to install&activate the current recommended Nvidia driver, but the machine hangs on shutdown/restart which prevents the installation of the proper Nvidia driver. I have to cycle the power to reboot. I ran the Update Manager in the hope that the updates would fix the hang-up. At the end of the update-installation it asked to reboot - and got stuck just like before. I see no obvious cause of the freeze and I don't know if it's caused by graphics problems or anything else. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing restart right after login). How can I determine what is causing the freeze? How can I fix this? I'm frankly rather disappointed because I bought this new machine in the hopes of getting the graphics to work, which failed miserably on my old machine, even though Ubuntu is supposed to be good with Nvidia. Being a fresh convert from Windows, I was hoping for a happier experience this time, so I'm very much looking forward to your suggestions! ... After posting this question, I see related questions in the right sidebar: this, this, and this. Don't know why these didn't show up while I composed by question. Those questions suggest some ACPI settings but I am not experienced enough to find/change those settings. I'll try the sudo shutdown -h now command when I get home and see if that works, then update this question. I did check the system BIOS but didn't see anything out of the ordinary.

  Read the article

• MOSS 2007 WSP Retraction 'Error"

  - by juanlarios

  This one is a quick post , but I thought I would post this information as I could not find anything that helped me on this specific scenario. Please read the entire article before taking action as there are some irreversable or very troublesome routes I caution about! Problem: I had a client trying to retract a WSP from Central Admin and would eventually go to an, 'Error' State. I could not retract it and after looking at event logs I figured it was a problem with security. I tried several accounts, checked the databases to see if there was some issue with readonly databases and nothing was working.   Solution: Delete the solution from central admin! Yes, I said it. With StsAdm , just delete the solution from Central Admin using this command: "C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.exe" -o deletesolution -name "yoursolution.wsp" What has just happened is that Central Admin does not know about the WSP anymore but the feature and any deployed files are still on the server. For whatever reason SharePoint was not able to retract the files as it normally does. Now you can do one of two things, you can add the solution again to central admin and deploy overtop of the deployed files so it overrides them, or simply clean up the files manually. I re-added the solution through stsadm, but then deployed through stsadm using the -force option in the command. This overrides the existing files on the server. If you deploy through Central admin it will tell you you need the -force option that is not offered as part of the UI in central admin. Use the following command: "C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.exe" -o deploysolution -name "YourSolution.wsp" -immediate -allowgacdeployment -force Just to make sure everything was good, I retracted to solution again, and it worked! then I deleted the solution from central admin alltogether. Then I checked the server and noticed all the files that were deployed with the WSP were cleaned up properly. I then re-added the new WSP the client was looking to install (an Updated WSP). Conclusion: I have no idea why it was not able to retract, but I have seen this several times. I don't know if has to do with security of certain accounts. Althought it's anoying at times, it is fairly easy to fix if you have good instructions. Hope it helps you out!   ***WORD OF CAUTION - if you clean up the files manually you might want to uninstall the features through STSADM commands as SharePOint might still recognize the features that were deployed as the WSP. You might not want to get into the mess of deleting files that are still part of activated or installed Features. THis is why I suggest doing what I did.

  Read the article

• Northwind now available on SQL Azure

  - by jamiet

  Two weeks ago I made available a copy of [AdventureWorks2012] on SQL Azure and published credentials so that anyone from the SQL community could connect up and experience SQL Azure, probably for the first time. One of the (somewhat) popular requests thereafter was to make the venerable Northwind database available too so I am pleased to say that as of right now, Northwind is up there too. You will notice immediately that all of the Northwind tables (and the stored procedures and views too) have been moved into a schema called [Northwind] – this was so that they could be easily differentiated from the existing [AdventureWorks2012] objects. I used an SQL Server Data Tools (SSDT) project to publish the schema and data up to this SQL Azure database; if you are at all interested in poking around that SSDT project then I have made it available on Codeplex for your convenience under the MS-PL license – go and get it from https://northwindssdt.codeplex.com/. Using SSDT proved particularly useful as it alerted me to some aspects of Northwind that were not compatible with SQL Azure, namely that five of the tables did not have clustered indexes: The beauty of using SSDT is that I am alerted to these issues before I even attempt a connection to SQL Azure. Pretty cool, no? Fixing this situation was of course very easy, I simply changed the following primary keys from being nonclustered to clustered: [PK_Region] [PK_CustomerDemographics] [PK_EmployeeTerritories] [PK_Territories] [PK_CustomerCustomerDemo]   If you want to connect up then here are the credentials that you will need: Server mhknbn2kdz.database.windows.net Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly You will need SQL Server Management Studio (SSMS) 2008R2 installed in order to connect or alternatively simply use this handy website: https://mhknbn2kdz.database.windows.net which provides a web interface to a SQL Azure server. Do remember that hosting this database is not free so if you find that you are making use of it please help to keep it available by visiting Paypal and donating any amount at all to [email protected]. To make this easy you can simply hit this link and the details will be completed for you – all you have to do is login and hit the “Send” button. If you are already a PayPal member then it should take you all of about 20 seconds! I hope this is useful to some of you folks out there. Don’t forget that we also have more data up there than in the conventional [AdventureWorks2012], read more at Big AdventureWorks2012. @Jamiet  AdventureWorks on Azure - Provided by the SQL Server community, for the SQL Server community!

  Read the article

• How do I prevent having to log in on 3 separate prompts every time I start my machine?

  - by JC

  Ubuntu 11.04 Natty Narwhal, Ubuntu Classic desktop Each time I start my machine, I have to log in 3 times. I spent a week in IRCFreenode#ubuntu and got nothing but condescension. I've searched on the official Ubuntu fora for similar problems, tried every recommendation, and still get 3 login screens. As a workaround, I have reset login such that I get a login screen at startup, which I'd prefer not to get since this machine is accessible by no one but me, physically. I have gone into System Preferences Passwords and Encryption Keys, set first 'Passwords: default' to 'Default' and unlocked it, and unlocked the 'Passwords: login' key, too. Next, since that changed nothing, I set 'Passwords: login' to 'Default', and checked to make sure it was still unlocked. Again, no change, still get 3 login prompts at startup. I've checked twice to insure that I am the owner of the files; I am. At the suggestion of several people in #ubuntu, I've deleted first one, then the other password key in 'Passwords and Encryption Keys'. Still get 3 login prompts. I changed from the Unity desktop to Ubuntu Classic. While that didn't fix the above problem, it is a much more elegant desktop than Unity, and I'll keep it. From what I've read, this seems to be a Seahorse issue, but beyond that, no one seems to have a solution that works. I'm lost. This shouldn't be this difficult or annoying. I'm trying to help our local Old Time music collective get their machines switched over to Ubuntu in order to save them some money which they can use to promote their DRM-free music. But from what I've seen of Ubuntu so far on my own machine, I can't really recommend that they make this switch. I hope to be proved wrong on that point. But as it stands, if I was out of town or out of country and they ran into a problem, they'd have no way of fixing it as they're all less experienced than even I am. I'm not trying to cast aspersions on Ubuntu or Linux, but it seems pretty clear that KNOWLEDGEABLE, HELPFUL support for Ubuntu is lacking barring any desire on the problem-experiencing-user's part to avoid condescension. Having worked with, and run, several non-profits over the past 20 years, I know that getting volunteers to act professionally can be like herding cats. But an organization's reputation can be denigrated by sarcastic behaviors on the part of those who serve, effectively, as its public face. Thank you all for your help and support. Now...does anyone have a solution to my problem?

  Read the article

• Error installing RVM

  - by Dbugger

  I am following this guide, but this is the output I receive. What am the problem? dbugger@mercury:~$ \curl -sSL https://get.rvm.io | bash -s stable --rails Downloading https://github.com/wayneeseguin/rvm/archive/stable.tar.gz Upgrading the RVM installation in /home/dbugger/.rvm/ RVM PATH line found in /home/dbugger/.profile /home/dbugger/.bashrc /home/dbugger/.zshrc. RVM sourcing line found in /home/dbugger/.bash_profile /home/dbugger/.zlogin. Upgrade of RVM in /home/dbugger/.rvm/ is complete. # Enrique, # # Thank you for using RVM! # We sincerely hope that RVM helps to make your life easier and more enjoyable!!! # # ~Wayne, Michal & team. In case of problems: http://rvm.io/help and https://twitter.com/rvm_io Upgrade Notes: * No new notes to display. rvm 1.25.27 (stable) by Wayne E. Seguin <[email protected]>, Michal Papis <[email protected]> [https://rvm.io/] Searching for binary rubies, this might take some time. No binary rubies available for: ubuntu/14.04/x86_64/ruby-2.1.2. Continuing with compilation. Please read 'rvm help mount' to get more information on binary rubies. Checking requirements for ubuntu. Installing requirements for ubuntu. Updating system.......... Installing required packages: gawk, libreadline6-dev, libssl-dev, libyaml-dev, libsqlite3-dev, sqlite3.... Error running 'requirements_debian_libs_install gawk libreadline6-dev libssl-dev libyaml-dev libsqlite3-dev sqlite3', showing last 15 lines of /home/dbugger/.rvm/log/1401804140_ruby-2.1.2/package_install_gawk_libreadline6-dev_libssl-dev_libyaml-dev_libsqlite3-dev_sqlite3.log ++ /scripts/functions/utility : __rvm_try_sudo() 405 > sudo -p '%p password required for '\''apt-get --no-install-recommends --yes install gawk libreadline6-dev libssl-dev libyaml-dev libsqlite3-dev sqlite3'\'': ' apt-get --no-install-recommends --yes install gawk libreadline6-dev libssl-dev libyaml-dev libsqlite3-dev sqlite3 Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libssl-dev : Depends: libssl1.0.0 (= 1.0.1f-1ubuntu2) but 1.0.1f-1ubuntu2.1 is to be installed E: Unable to correct problems, you have held broken packages. ++ /scripts/functions/utility : __rvm_try_sudo() 405 > return 100 ++ /scripts/functions/requirements/ubuntu : requirements_debian_libs_install() 36 > return 100 Requirements installation failed with status: 100.

  Read the article

• Five Best Practices for Going Mobile

  - by kellsey.ruppel

  76% of IT decision makers indicate mobile trends will have a high to extremely high impact on their organization. Has your organization gone mobile? Looking for some ideas on how to get started? John Brunswick shares his Best Practices for Going Mobile. Mobile technology has gone from nice-to-have to a cornerstone of user engagement. Mobile access enables social networking, decision support, purchasing, content consumption, and location-based searching, extending experiences beyond what is available in traditional desktop computing.  Organizations rushing to ensure their brand's mobile availability may have taken a tactical approach to implementation, but strategically approaching mobile can enable greater returns on a similar investment and subsequent mobile projects. Here are some strategic considerations for delivering products, services, and information to mobile constituents.  Who, Why, and What? Ask yourself these key questions: who are you attempting to engage through the channel, and why are they engaging you through this channel? What experience will satisfy their needs? What outcome will support your core business? Will you be informing and/or transacting with this person?  Mobile Behavior. Mobile users generally engage for a very specific purpose. Ensure that access to information, services, and products is streamlined. Arriving on a mobile site through search only to be asked to search again frustrates users.  Mobile Is Broad. After establishing the audience and goal, review technology requirements to support them. Do you need a mobile Website, native mobile application, or both? Do you need to support multiple devices? Know the difference between native mobile and mobile Web.  Social Strategy. Users are more likely to trust reviews from peers than marketing information from a vendor. If you are selling products or services, be sure to make social integration part of your strategy.  Content Management. Consider a shared content platform strategy for Web and mobile projects. Fresh, consistent content is important for high-quality experiences. Read more from John Brunswick.We'll also be talking mobile strategies and how you can transform your portal experience and optimize online engagement -- making your portals more interactive and more engaging across multiple channels in a webcast tomorrow. We hope you'll join us!

  Read the article

• The Case of the Missing Date/Time Stamp: Reporting Services 2008 R2 Snapshots

  - by smisner

  This week I stumbled upon an undocumented “feature” in SQL Server 2008 R2 Reporting Services as I was preparing a demonstration on how to set up and use report snapshots. If you’re familiar with the main changes in this latest release of Reporting Services, you probably already know that Report Manager got a facelift this time around. Although this facelift was generally a good thing, one of the casualties – in my opinion – is the loss of the snapshot label that served two purposes… First, it flagged the report as a snapshot. Second, it let you know when that snapshot was created. As part of my standard operating procedure when demonstrating report snapshots, I point out this label, so I was rather taken aback when I didn’t see it in the demonstration I was preparing. It sort of upset my routine, and I’m rather partial to my routines. I thought perhaps I wasn’t looking in the right place and changed Report Manager from Tile View to Detail View, but no – that label was still missing. In the grand scheme of life, it’s not an earth-shattering change, but you’ll have to look at the Modified Date in Details View to know when the snapshot was run. Or hope that the report developer included a textbox to show the execution time in the report. (Hint: this is a good time to add this to your list of report development best practices, whether a report gets set up as a report snapshot or not!) A snapshot from the past In case you don’t remember how a snapshot appeared in Report Manager back in the old days (of SQL Server 2008 and earlier), here’s an image I snagged from my Reporting Services 2008 Step by Step manuscript: A snapshot in the present A report server running in SharePoint integrated mode had no such label. There you had to rely on the Report Modified date-time stamp to know the snapshot execution time. So I guess all platforms are now consistent. Here’s a screenshot of Report Manager in the 2008 R2 version. One of these is a snapshot and the rest execute on demand. Can you tell which is the snapshot? Consider descriptions as an alternative So my report snapshot demonstration has one less step, and I’ll need to edit the Denali version of the Step by Step book. Things are simpler this way, but I sure wish we had an easier way to identify the execution methods of the reports. Consider using the description field to alert users that the report is a snapshot. It might save you a few questions about why the data isn’t up-to-date if the users know that something changed in the source of the report. Notice that the full description doesn’t display in Tile View, so keep it short and sweet or instruct users to open Details View to see the entire description.

  Read the article

• Need help with a complex 3d scene (using Ogre and bullet)

  - by Matthias

  In my setup there is a box with a hole on one side, and a freely movable "stick" (or bar, tube). This stick can be inserted/moved through the hole into the box. This hole is exactly as wide as the diameter of the stick. In reality, when you would now hold the end of the stick in your hand and move the hand left/right or up/down, the other end of the stick, which is inside the box, would move into the opposite direction of your hand movement (because the stick is affixed at the pivot point where it is entering the box through the hole). (I hope you understand what I mean so far.) Now I need to simulate such a setup in a 3d program. I have already successfully developed an Ogre3d framework for this application, including bullet. But what I don't know is how I can implement in my program what I have described above. This application must include two more features: The scene camera is attached to the end of the stick that is inserted into the box. So when the user would move the mouse (to control "his" end of the stick outside the box), then the camera attached to the stick would move in the opposite direction, as described above. The stick has some length, and the user can push it further into the box, or pull it closer to him again. That means of course that the max. radius on which the end of the stick inside the box can move depends on how far the stick is pushed into the box. Thus, the more the stick is pushed into the box, the larger the max. radius of this end of the stick with the camera will be. I understand this is maybe quite a complex thing, so I don't expect any real source code here. I already have the Ogre and bullet part as said up and running, as well as a camera attached to the stick. This works fine. What I don't know though is how I can simulate the setup described above. Especially the requirement that the stick is affixed at the position of the hole on the box, where it is inserted into the box. Any ideas how I could approach to implement the described setup?

  Read the article

• SharePoint 2010 Hosting :: How to Create an External Content Type SharePoint 2010

  - by mbridge

  In this simple Article trying to show how SharePoint Designer 2010 more the External Content Type to External Database are very easy to create and can be integrated with our SharePoint Portals. You can download SharePoint Designer 2010 here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d88a1505-849b-4587-b854-a7054ee28d66&displaylang=en For this Example I will create a Database in SQL Server and will use SharePoint Designer 2010 to create the connections and use as a mirror from our SharePoint Portal using List and the Database. The first thing we need to do, is connect to SQL Server and create our Database call “Contacts” and add the Table “Contact” with the following fields.  When we create the External Content Type. We  will need to associate the Content Type, in this case i am using the Generic List, then we can create the Connection to the external Data Source. After create the Connection to the Database we can define what Columns we will use and what operations we will add our custom List. For this example i select all Operation they came default. This operation are very important because the Business rules are defined in each operation. After we create the diferent operations we can create the Custom List and define the how will be the Operation and add the Name for our custom List.  If you try to access the New Custom List Call “Custom Contact” you will see we will not have access to the Business Data Connectivity. To Resolve this issue we will need to give Access and permissions to users to the Custom External Content Type BDC connection in the Central administration.  Access to Central Administration Page and select the option “Service Application Tab> Manage Service Application”. There you select the Service “Business Data Connectivity Service” then select “Manage”.  This Option will list all External Content Type, choose the External Content Type we create and select the option “Set Object Permission”, this option will allow to add users to the BDC and manage the permissions to the Custom List.  After the correct permissions are given we can Access to Data on our custom Contact List and start creating new Item and all the other options and operation we define to the same List.  Hope you like this litle Article about connect Database Content to SharePoint Portal using the Externa Content Types and BCS.Thank you.

  Read the article

• Using multiple diagrams per model in Entity Framework 5.0

  - by nikolaosk

  I have downloaded .Net framework 4.5 and Visual Studio 2012 since it was released to MSDN subscribers on the 15th of August.For people that do not know about that yet please have a look at Jason Zander's excellent blog post .Since then I have been investigating the many new features that have been introduced in this release.In this post I will be looking into theIn order to follow along this post you must have Visual Studio 2012 and .Net Framework 4.5 installed in your machine.Download and install VS 20120 using this link.My machine runs on Windows 8 and Visual Studio 2012 works just fine. I have also installed in my machine SQL Server 2012 developer edition. I have also downloaded and installed AdventureWorksLT2012 database.You can download this database from the codeplex website.   Before I start showcasing the demo I want to say that I strongly believe that Entity Framework is maturing really fast and now at version 5.0 can be used as your data access layer in all your .Net projects.I have posted extensively about Entity Framework in my blog.Please find all the EF related posts here. In this demo I will show you how to split an entity model into multiple diagrams using the new enhanced EF designer. We will not build an application in this demo.Sometimes our model can become too large to edit or view.In earlier versions we could only have one diagram per EDMX file.In EF 5.0 we can split the model into more diagrams.1) Launch VS 2012. Express edition will work fine.2) Create a New Project. From the available templates choose a Web Forms application  3) Add a new item in your project, an ADO.Net Entity Data Model. I have named it AdventureWorksLT.edmx.Then we will create the model from the database and click Next.Create a new connection by specifying the SQL Server instance and the database name and click OK.Then click Next in the wizard.In the next screen of the wizard select all the tables from the database and hit Finish.4) It will take a while for our .edmx diagram to be created. When I select an Entity (e.g Customer) from my diagram and right click on it,a new option appears "Move to new Diagram".Make sure you have the Model Browser window open.Have a look at the picture below 5) When we do that a new diagram is created and our new Entity is moved there.Have a look at the picture below  6) We can also right-click and include the related entities. Have a look at the picture below. 7) When we do that the related entities are copied to the new diagram.Have a look at the picture below  8) Now we can cut (CTRL+X) the entities from Diagram2 and paste them back to Diagram1.9) Finally another great enhancement of the EF 5.0 designer is that you can change colors in the various entities that make up the model.Select the entities you want to change color, then in the Properties window choose the color of your choice. Have a look at the picture below. To recap we have demonstrated how to split your entity model in multiple diagrams which comes handy in EF models that have a large number of entities in them Hope it helps!!!!

  Read the article

• Pro SharePoint 2010 Business Intelligence Solutions

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). Oh yeah baby, it’s out finally! This book is what I wanted to write for so long now, but never really got a chance to. For SharePoint 2007, I authored the SharePoint section of “Smart BI Solutions with SQL Server 2008” for MS Press. But never really got the time, to author a full book that this topic deserved. Until SharePoint 2010, we actually have a full book on this topic. So first things first, I didn’t actually write it. My role was limited to the overall concept, the outline, the layout, completion of it, code samples, identifying what we need in here, vouching for technical accuracy, identifying authors etc. The real work was done by Srini (5 chapters), and Steve (1 chapter). So credit given where it is due. But, with that said, this is a pretty good book. It has always been a challenge to find the superman that knows both, data ware housing concepts, and SharePoint concepts. The data ware housing concepts include basic stuff you need to know to work in the BI area such as cubes, MDX queries, etc. So chapter 1 covers that – and if you’re a hardcore DBA, feel free to skip Chapter 1. Then beyond that, we take every single SharePoint 2010 BI topic, and slice and dice it in detail. The topics we deal with are - Visio Services Reporting services Business Connectivity Services Excel Services PerformancePoint Services And in covering each of these topics, we ensure that a general layout was followed for each topic, to ensure completeness of content. We make sure we cover Setup related issues and advice Point and click usage Code usage, i.e. extensibility using visual studio and a walkthrough of the administration side of things, including powershell. (Yes, I insisted on that in being there in every chapter). Writing a book is always a lot of work, so we hope you find it useful. And it should go very well with the other book I just reviewed, which is Microsoft ADO.NET 4, step by step. Comment on the article ....

  Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >