Search Results

Search found 18329 results on 734 pages for 'interpret order'.

Page 180/734 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

• How can I find a list of all SSE instructions? What happens if a CPU doesn't support SSE?

  - by Blastcore

  So I've been reading about how processors work. Now I'm on the instructions (SSE, SSE2, etc) stuff. (Which is pretty interesting). I have lot of questions (I've been reading this stuff on Wikipedia): I've saw the names of some instructions that were added on SSE, however there's no explanation about any of them (Maybe SSE4? They're not even listed on Wikipedia). Where can I read about what they do? How do I know which of these instructions are being used? If we do know which are being used, let's say I'm doing a comparison, (This may be the most stupid question I've ever asked, I don't know about assembly, though) Is it possible to directly use the instruction on an assembly code? (I've been looking at this: http://asm.inightmare.org/opcodelst/index.php?op=CMP) How does the processor interpret the instructions? What would happen if I had a processor without any of the SSE instructions? (I suppose in the case we want to do a comparison, we wouldn't be able to, right?)

  Read the article

• How to configure a trusted connection between IIS 7 and SQL Server 2005?

  - by user1180652

  How do configure a trusted connection between IIS 7 and SQL Server 2005? My webapp was working fine with Windows Authentication enabled in IIS. Now, in order to solve a problem, we need to use a trusted connection. Unfortunately, enabling the trusted connection in the web.config broke the webapp. Oddly enough, when I run this application with trusted connection from my local dev machine (using the Cassini web server) IIS (Windows Server 2008) is running on one machine. The database (SQL Server 2005 but could migrate to 2008) is running on another machine. We are on a Windows domain running AD. All traffic is within our own firewall - no public access. Beyond that, I can't provide much info but I can find it. We're very "compartmentalized" (we have server people, security people, oracle people, SQL Server people, etc.) Thanks! Update 02/14/2012 0902: The webapp is now functional (app no longer broken) but the main issue is still unresolved. Now I have the app's application pool running as a domain account with permissions on the SQL Server box and IIS box. We were using this account to run the application but, and here's the problem, we need to log the real user name that made a change. When using the service account, the name of that service account appeared in the audit tables, making the auditing quite useless. So, not I'm at least running again. The connection string in the web.config is using "Trusted_Connection=True", the appPool is using a domain account with access to both boxes, BUT when I make a change (logged in as me) the name of the service account (appPool identity) is still logged in the audit tables. I also manually granted full permissions to the service account on the webapp folder. What do I need to do in order to log my name, not the service account, in the audit tables? Everything I'm reading says I need to establish a trusted connection between the two servers.

  Read the article

• Same netmask or /32 for secondary IP on Linux

  - by derobert

  There appear to be (at least) two ways to add a secondary IP address to an interface on Linux. By secondary, I mean that it'll accept traffic to the IP address, and responses to connections made to that IP will use it as a source, but any traffic the box originates (e.g., an outgoing TCP connection) will not use the secondary address. Both ways start with adding the primary address, e.g., ip addr add 172.16.8.10/24 dev lan. Then I can add the secondary address with either a netmask of /24 (matching the primary) or /32. If I add it with a /24, it gets flagged secondary, so will not be used as the source of outgoing packets, but that leaves a risk of the two addresses being added in the wrong order by mistake. If I add it with /32, wrong order can't happen, but it doesn't get flagged as secondary, and I'm not sure what the bad effects of that may be. So, I'm wondering, which approach is least likely to break? (If it matters, the main service on this machine is MySQL, but it also runs NFSv3. I'm adding a second machine as a warm standby, and hope to switch between them by changing which owns the secondary IP.)

  Read the article

• VPN Setup: Mac OS X and SonicWall

  - by noloader

  I'm trying to get VPN access up and running. The company has a SonicWall firewall/concentrator and I'm working on a Mac. I'm not sure of the SonicWall's hardware or software level. My MacBook Pro is OS X 10.8, x64, fully patched. The Mac Networking applet claims the remote server is not responding. The connection attempt subsequently fails: This is utter bullshit, as a Wireshark trace shows the Protected Mode negotiation, and then the fallback to Quick Mode: I have two questions (1) does Mac OS X VPN work in real life? (2) Are there any trustworthy (non-Apple) tools to test and diagnose the connection problem (Wireshark is a cannon and I have to interpret the results)? And a third question (off topic): what is broken in Cupertino such that so much broken software gets past their QA department? EDIT (12/14/2012): The network guy sent me "VPN Configuration Guide" (Equinox document SonicOS_Standard-6-EN). It seems an IPSec VPN now requires a Firewall Unique Identifier. Just to be sure, I revisited RFC 2409, where Main Mode, Aggressive Mode, and Quick Mode are discussed. I cannot find a reference to Firewall Unique Identifier. I think I am screwed here: I am trying to connect to a broken (non-standard) firewall, with a broken Mac OS X client. Fortunately, I can purchase VPN Tracker Personal (a {SonicWall|Equinox}-authored client) for $129US from Equinox. So much for standards....

  Read the article

• Switching between taskbar tasks sequentially

  - by Doug Kavendek

  In Firefox and some other tabbed interfaces, I can use Ctrl-PgUp/Down to cycle through tabs sequentially, based on their order in the tab list. I associate what is what based almost entirely on its position along the tab bar and what is next to what, so this is extremely useful for the way I keep track of things in my head. However, I haven't been able to find an equivalent for actual taskbar items in Windows, such that with a single shortcut will switch focus to the task item either to the left or the right of the current task in focus. There's a lot of existing shortcuts that I use (Alt-Tab, Ctrl-Esc, and their counterparts), but these use the window manager's stacking order, so it always changes based on what you've switched between in the past, and so their usefulness generally only lies in switching between two apps -- above that, I just can't keep that kind of stack in my head. The closest shortcut I've found is Winlogo-Tab, but it only moves a selector on the taskbar, so you have to hit space after moving it, and it also seems to originate the selector from the leftmost item every time (rather than relative to the current item). Am I just a weirdo and will have to write my own app to perform these actions?

  Read the article

• New SSD, is the MBR broken? DISK BOOT FAILURE

  - by Shevek

  I've been running Windows 7 on a WD 500gb SATA single drive, single partition setup for some time with no issues. I've just installed a new Kingston V Series 64gb SSD and performed a clean install of Win7 to it, deleting the partitions on the 500gb and using that as a data drive. All was well for a few reboots but then I started to get "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" messages. If I put the Win7 install DVD back in the drive it boots fine. Tried a clean install again, after replacing SATA cables and swapping SATA ports, with a complete partition wipe of both drives. Again, rebooted fine a few times then back with the "DISK BOOT FAILURE" error. Looked on the web and found some discussions about it so I then started from scratch again. This time I wiped the MBR on both drives using MBRWork, disconnected the 500gb and reinstalled to the SSD. Removed the install DVD and installed all the drivers which involved many reboots, all with no problem. To make sure I also did a few cold boots as well. Reconnected the 500gb, initialised, partitioned and formatted it. Copied data to it and did some more reboots and shutdowns. All was ok. Then out of the blue comes another "DISK BOOT FAILURE" and again, if the Win7 install DVD is in the drive it boots fine. So, is the SSD a bad'un? TIA UPDATE: It was a BIOS issue! I found a hidden away option for HDD boot order, which was separate from the usual HDD/CDRom/FDD boot order option. The WD was set to boot before the SSD... Swapped them round and all is well. Still don't understand how it worked at first though... Thanks Solaris

  Read the article

• Why am I getting this error in the logs?

  - by Matt

  Ok so I just started a new ubuntu server 11.10 and i added the vhost and all seems ok ...I also restarted apache but when i visit the browser i get a blank page the server ip is http://23.21.197.126/ but when i tail the log tail -f /var/log/apache2/error.log [Wed Feb 01 02:19:20 2012] [error] [client 208.104.53.51] File does not exist: /etc/apache2/htdocs [Wed Feb 01 02:19:24 2012] [error] [client 208.104.53.51] File does not exist: /etc/apache2/htdocs but my only file in sites-enabled is this <VirtualHost 23.21.197.126:80> ServerAdmin [email protected] ServerName logicxl.com # ServerAlias DocumentRoot /srv/crm/current/public ErrorLog /srv/crm/logs/error.log <Directory "/srv/crm/current/public"> Order allow,deny Allow from all </Directory> </VirtualHost> is there something i am missing .....the document root should be /srv/crm/current/public and not /etc/apache2/htdocs as the error suggests Any ideas on how to fix this UPDATE sudo apache2ctl -S VirtualHost configuration: 23.21.197.126:80 is a NameVirtualHost default server logicxl.com (/etc/apache2/sites-enabled/crm:1) port 80 namevhost logicxl.com (/etc/apache2/sites-enabled/crm:1) Syntax OK UPDATE <VirtualHost *:80> ServerAdmin [email protected] ServerName logicxl.com DocumentRoot /srv/crm/current/public <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /srv/crm/current/public/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost>

  Read the article

• Apache2 VirtualHosts 403 Oddity

  - by Carson C.

  I'm sure this is something I should already understand, but I'm finding myself confused. The configs in play add up to this: NameVirtualHost *:80 Listen 80 <VirtualHost *:80> <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName domain.tld ServerAlias *.domain.tld DocumentRoot /var/www/domain.tld <Directory /var/www/domain.tld> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> DNS is working correctly. The issue is, every variant of http://*.domain.tld/ (including http://domain.tld/) works correctly, except http://www.domain.tld/ which throws a 403. The logs state: client denied by server configuration: /etc/apache2/htdocs If I remove the first VirtualHost block from play, everything works as expected including http://www.domain.tld. This leads me to believe that for some reason, Apache is not considering www.domain.tld to match the second VirtualHost block, and is thereby falling back to deny all. This seems wrong. Shouldn't the second block match www.domain.tld? I've been able to resolve this, but I still don't understand why. In my original configs, I was using the real ip address of the server instead of *. Switching all instances to * as shown above made everything work as expected. Does this have something to do with the way browsers request resources?

  Read the article

• Setting up httpd-vhosts.conf for multiple virtual hosts

  - by Chris Sobolewski

  I have a simple test setup using xampp at home, and I am getting really weird behavior when I attempt to set up multiple virtual hosts on this box. Here is my vhosts file: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] ServerName foo DocumentRoot "D:\wamp\xampp\htdocs\foo" ErrorLog logs/foo-error_log CustomLog logs/foo-access_log common <Directory "D:\wamp\xampp\htdocs\foo"> Options Indexes FollowSymLinks Includes execCGI AllowOverride All Order Allow,Deny Allow From All </Directory> </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName bar DocumentRoot "D:\wamp\xampp\htdocs\bar" ErrorLog logs/bar-error_log CustomLog logs/bar-access_log common <Directory "D:\wamp\xampp\htdocs\bar"> Options Indexes FollowSymLinks Includes execCGI AllowOverride All Order Allow,Deny Allow From All </Directory> </VirtualHost> When I attempt to run visit the first site, it works as expected. When I attempt to run the second site, I get a weird hybrid mishmash of both sites. It's the weirdest thing.

  Read the article

• Apache and Virtual Hosts Problem on OS X

  - by Charles Chadwick

  I recently formatted and installed my iMac. I am running 10.6.5. Prior to this format, I had the default Apache web server up and running with several virtual hosts, and everything ran beautifully. After formatting, I set everything back up again, and now Apache is acting funny. Here is a description of what I have going on. My default root directory for the Apache Web server is pointed to an external hard drive. In my httpd.conf, here is what I have: DocumentRoot "/Storage/Sites" Then a few lines beneath that: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> And then beneath that: <Directory "/Storage/Sites"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from All </Directory> At the end of this file, I have commented out the user dir include conf file: Include /private/etc/apache2/extra/httpd-userdir.conf And uncommented the virtual hosts conf file: Include /private/etc/apache2/extra/httpd-vhosts.conf Moving on, I have the following entry in my vhosts file: <VirtualHost *:80> DocumentRoot "/Storage/Sites/mysite" ServerName mysite.dev </VirtualHost> I also have a host record in my /etc/hosts file that points mysite.dev to 127.0.0.1 (I also tried using my router IP, 192.168.1.2). The problem I am coming across is, despite having PHP files in /Storage/Sites/mysite, the server is still looking at /Storage/Sites. I know this because in the DocumentRoot contains a php file with phpinfo() (whereas the index.php file in mysite has different code). I have tried setting up other virtual hosts, but they are still doing the same thing. Also, "NameVirtualHost *:80" is in my vhosts file. I saw as a solution on another thread here. Doesn't seem to make a difference. Any ideas on this? Let me know if this is not enough information.

  Read the article

• Grub and Renaming... Why does Kubuntu 9.10 make it so hard?

  - by NH

  I'm trying to rearrange the grub menu in Kubuntu 9.10 (similar to this post), but unfortunately, Kubuntu includes the latest (and NOT greatest) version of grub, which no longer uses the elegant menu.lst. ARG! So anyway, I'm digging around in /etc/grub.d and I can't figure out how to rename the files in order to get them to boot in another order. (on a side note, I can't get xPUD to show up in the boot list... but that is a little less important) So why doesn't it work to do sudo grub in the terminal? (that seems to be the easiest option, but that doesn't work either.) Further, why can't I rename the files? Do I need to do it in the terminal? If so, how do I rename the file with the terminal? Can I run Dolphin (or Konqueror or whatever) as root (or su)? And don't tell me I need to try CHMOD first; I already tried that, and I still couldn't rename the file.

  Read the article

• How to use basic auth for single file in otherwise forbidden Apache directory?

  - by mit

  I want to allow access to a single file in a directory that is otherwise forbidden. This did not work: <VirtualHost 10.10.10.10:80> ServerName example.com DocumentRoot /var/www/html <Directory /var/www/html> Options FollowSymLinks AllowOverride None order allow,deny allow from all </Directory> # disallow the admin directory: <Directory /var/www/html/admin> order allow,deny deny from all </Directory> # but allow this single file:: <Files /var/www/html/admin/allowed.php> AuthType basic AuthName "private area" AuthUserFile /home/webroot/.htusers Require user admin1 </Files> ... </VirtualHost> When I visit http://example.com/admin/allowed.php I get the Forbidden message of the http://example.com/admin/ directory. How can I make an exception for allowed.php? If not possible, maybe I could enumerate all forbidden files in another Files directive? Let's say admin/ contains also user.php and admin.php which should be forbidden in this virtual host.

  Read the article

• Remotely viewing IP camera on Belkin N450 DB router

  - by Mike Miller

  I need to setup a wireless IP camera (Trendnet TV-IP501W) on my network so that it is remotely visible from anywhere. Right now I successfully connected it to my home network but nothing else. My router is a Belkin N450 DB. Any help would be much appreciated, including what this would be referred to as so I could more easily ask another forum. I believe it is something like "port forwarding" but I'm not sure. Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private. I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong? Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private. I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?

  Read the article

• VLAN Tagging Traffic on Cisco Switch

  - by David W

  I have a situation where I'm setting up multiple VLANS on a pfSense firewall on the same physical interface for a client. So in pfSense, I now have VLAN 100 (employees) and VLAN 200 (students - student computer lab). Downstream from pfSense, I have a Cisco SG200 switch, and coming off of the SG200 is the student lab (running on a Catalyst 2950. Yes, that's old, but it works, and this is a poor nonprofit we're talking about). What I'd like to do is tag everything on the network as VLAN 100, except for the student computer lab. Earlier today when I was on-site with the client, I went into to the old Catalyst 2950, and assigned all of its ports to access VLAN 200 (switchport mode access vlan 200) without setting up a trunk on the Catalyst or on the SG200. Looking back on it, I now understand why internet in the lab broke. I reverted the lab back to the default VLAN1 (we're still running on a different firewall - we haven't deployed pfSense -, and the traffic is still separated physically). So my question is, what do I need to do in order to properly deploy this scenario? I believe the correct answer is: Ensure VLANs 100 and 200 are setup in pfSense, and that DHCP is operating correctly (on separate subnets) Setup a trunkport VLAN that allows both 100 & 200 traffic, and plug that port directly into pfSense. Setup a VLAN 200 trunkport on the SG200 (It's not running iOS, but if it were, the command would be switchport trunk native vlan 200), which will then plug into the Catalyst 2950. Setup a VLAN 200 trunkport on the Catalyst 2950 (that is plugged into the SG200 VLAN200 port with the same command - switchport trunk native vlan 200) Setup the rest of the ports on the old Catalyst 2950 in the lab to be access ports on VLAN200. Is there anything that I'm missing, or do I need to tweak any of these steps, in order to properly segment the network traffic?

  Read the article

• Apache Mod SVN Access Forbidden

  - by Cerin

  How do you resolve the error svn: access to '/repos/!svn/vcc/default' forbidden? I recently upgraded a Fedora 13 server to 16, and now I'm trying to debug an access error with a Subversion server running on using Apache with mod_dav_svn. Running: svn ls http://myserver/repos/myproject/trunk Lists the correct files. But when I go to commit, I get the error: svn: access to '/repos/!svn/vcc/default' forbidden My Apache virtualhost for svn is: <VirtualHost *:80> ServerName svn.mydomain.com ServerAlias svn DocumentRoot "/var/www/html" <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/var/www/html"> Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> <Location /repos> Order allow,deny Allow from all DAV svn SVNPath /var/svn/repos SVNAutoversioning On # Authenticate with Kerberos AuthType Kerberos AuthName "Subversion Repository" KrbAuthRealms mydomain.com Krb5KeyTab /etc/httpd/conf/krb5.HTTP.keytab # Get people from LDAP AuthLDAPUrl ldap://ldap.mydomain.com/ou=people,dc=mydomain,dc=corp?uid # For any operations other than these, require an authenticated user. <LimitExcept GET PROPFIND OPTIONS REPORT> Require valid-user </LimitExcept> </Location> </VirtualHost> What's causing this error? EDIT: In my /var/log/httpd/error_log I'm seeing a lot of these: [Fri Jun 22 13:22:51 2012] [error] [client 10.157.10.144] ModSecurity: Warning. Operator LT matched 20 at TX:inbound_anomaly_score. [file "/etc/httpd/modsecurity.d/base_rules/modsecurity_crs_60_correlation.conf"] [line "31"] [msg "Inbound Anomaly Score (Total Inbound Score: 15, SQLi=, XSS=): Method is not allowed by policy"] [hostname "svn.mydomain.com"] [uri "/repos/!svn/act/0510a2b7-9bbe-4f8c-b928-406f6ac38ff2"] [unique_id "T@Sp638DCAEBBCyGfioAAABK"] I'm not entirely sure how to read this, but I'm interpreting "Method is not allowed by policy" as meaning that there's some security Apache module that might be blocking access. How do I change this?

  Read the article

• apache adress based access control

  - by stijn

  I have an apache instance serving different locations, eg https://host.com/jira https://host.com/svn https://host.com/websvn https://host.com/phpmyadmin Each of these has access control rules based on ip adres/hostname. Some of them use the same configuration though, so I have to repeat the same rules each time: Order Deny,Allow Deny from All Allow from 10.35 myhome.com mycollegueshome.com Is there a way to make these reusable so that I don't have to change each instance everytime something changes? Ie, can I write this once, then use it for a couple of locations? Using SetEnvIf maybe? It would be nice if I could do something like this pseudo-config: <myaccessrule> Order Deny,Allow Deny from All Allow from 10.35 myhome.com mycollegueshome.com </myaccessrule> <Proxy /jira*> AccessRule = myaccessrule </Proxy> <Location /svn> AccessRule = myaccessrule </Location> <Directory /websvn> AccessRule = myaccessrule </Directory>

  Read the article

• Group Policy for DNS Server Addresses

  - by John

  This question deals strictly with the methodology of using Active Directory to publish DNS settings and controlling the DNS server address order to domain attached clients. This is not asking about if this is the right function, role, or best use of group policy; but rather, how to make it work. I would like to be able to publish in group policy DNS addresses and possibly control the order in which the client consumes the addresses. I have tried following the information from this site without success. I set the following setting within group policy, but the client never shows the settings within the TCP/IP properties. Computer Configuration/Administrative Templates/Network/DNS Client/DNS Servers I did list them as a single space separated list. For example, the following: 192.168.0.1 192.168.10.3 192.168.34.2 192.168.2.67 192.168.56.99 192.168.99.23 This would be for Windows 7, Windows Server 2003, and Windows Server 2008 clients. I am not sure what I am doing wrong or how to get this to work. Am I missing a setting? Do I need to set something differently?

  Read the article

• Graphite not running

  - by River

  I'm currently trying to install graphite 0.9.9 on a gentoo box using these instructions from the graphite wiki. Essentially, it fronts graphite using apache and mod_wsgi. Everything seems to have gone well, except that apache / the graphite webapp never seem to return a response to the web browser (the browser continuously waits to load the page). I've turned on the graphite debug info, but the only message in the log files is this, repeated over and over again in info.log (with the pid always changing): Thu Feb 23 01:59:38 2012 :: graphite.wsgi - pid 4810 - reloading search index These instructions have worked for me before to set up graphite on an Ubuntu machine. I suspect that mod_wsgi is dying, but I have confirmed that mod_wsgi works fine when not serving the graphite webapp. This is what my graphite.conf vhost file looks like: WSGISocketPrefix /etc/httpd/wsgi/ <VirtualHost *:80> ServerName # Server name DocumentRoot "/opt/graphite/webapp" ErrorLog /opt/graphite/storage/log/webapp/error.log CustomLog /opt/graphite/storage/log/webapp/access.log common # I've found that an equal number of processes & threads tends # to show the best performance for Graphite (ymmv). WSGIDaemonProcess graphite processes=5 threads=5 display-name='%{GROUP}' inactivity-timeout=120 WSGIProcessGroup graphite WSGIApplicationGroup %{GLOBAL} WSGIImportScript /opt/graphite/conf/graphite.wsgi process-group=graphite application-group=%{GLOBAL} WSGIScriptAlias / /opt/graphite/conf/graphite.wsgi Alias /content/ /opt/graphite/webapp/content/ <Location "/content/"> SetHandler None </Location> # XXX In order for the django admin site media to work you # must change @DJANGO_ROOT@ to be the path to your django # installation, which is probably something like: # /usr/lib/python2.6/site-packages/django Alias /media/ "/usr/lib64/python2.6/site-packages/django/contrib/admin/media/" <Location "/media/"> SetHandler None </Location> # The graphite.wsgi file has to be accessible by apache. It won't # be visible to clients because of the DocumentRoot though. <Directory /opt/graphite/conf/> Order deny,allow Allow from all </Directory> </VirtualHost>

  Read the article

• Faking a Linux environment without chroot

  - by Pascal

  For a university project I want to test a C++11 program on a 32-core machine. Unfortunately the machine has Ubuntu 12.04 with GCC 4.6 installed (we need GCC 4.7 because of some C++11 threading features). In such an environment I would normally run a chroot with a custom linux (say a debootstrap with Ubuntu 12.10). Since we don't get root access on the machine we can't use chroot. So far I have prepared a run-time environment using debootstrap for our code, I compiled it in the debootstrap environemnt. Then copied it onto the server (using rsync). In order to run our C++ code I set the LD_LIBRARY_PATH to export LD_LIBRARY_PATH=~/debootstrap/usr/lib/:~/debootstrap/lib64/:~/debootstrap/usr/lib/x86_64-linux-gnu/:~/debootstrap/lib/x86_64-linux-gnu/:$LD_LIBRARY_PATH and so far our code seems to run. I'm however stuck with our python code. It doesn't seem to be sufficient to set the paths manually. export PYTHONPATH=~/debootstrap/usr/lib/python2.7/dist-packages:~/debootstrap/usr/lib/python2.7:~/debootstrap/usr/lib/python2.7/plat-linux2:~/debootstrap/usr/lib/python2.7/lib-tk:~/debootstrap/usr/lib/python2.7/lib-dynload:~/debootstrap/usr/local/lib/python2.7/dist-packages:~/debootstrap/usr/lib/pymodules/python2.7:~/debootstrap/usr/lib/python2.7/dist-packages/PIL:~/debootstrap/usr/lib/python2.7/dist-packages/gtk-2.0:~/debootstrap/usr/lib/python2.7 Executing our script results in ImportError: No module named _path Is there an easier way to accomplish a "fake"-chroot than just overriding and creating environment variables? Note I need python since we created a custom C++-Python module in order to run our tests. Maybe I should create two questions from this.

  Read the article

• HP/Lenovo alternative to Buffalo iSCSI TerraStation?

  - by Robin Day

  I'm looking at virtualising some of our infrastructure in order to allow for more resiliance and future expandability. We have successfully virtualised on single servers with Direct Attached Storage and are now looking for a more future proof solution using a high powered host (or two) and a SAN (or two). I'm thinking that the host machine will probably be an HP ProLiant DL360 G7 (all of our exisiting infrastructure is HP). Unfortunately, I am new to the world of SANs. From what I can see, the Buffalo Terrastation III is all I would need in order to setup an iSCSI SAN for VMWare to use. However, I'm a little reticent to go that way as it's a bit too "entry level" for my liking. In particular I would be very keen for more redundancy, power, networking, etc. I'm also very aware that you "get what you pay for". Therefore, can anyone reccommend equivalents from the big boys? HP/Lenovo? I have searched high and low on the HP site and seen many options but am struggling to work out if it is all the hardware I will need. Some options appear to need separate controllers from disk enclosures, etc.

  Read the article

• plesk: how to configure reverse proxy rules properly?

  - by rvdb

  I'm trying to configure reverse proxy rules in vhost.conf. I have Apache-2.2.8 on Ubuntu-8.04, monitored by Plesk-10.4.4. What I'm trying to achieve is defining a reverse proxy rule that defers all traffic to -say- http://mydomain/tomcat/ to the Tomcat server running on port 8080. I have mod_rewrite and mod_proxy loaded in Apache. As far as I understand mod_proxy docs, entering following rules in /var/www/vhosts/mydomain/conf/vhost.conf should work: <Proxy *> Order deny,allow Allow from all </Proxy> ProxyRequests off RewriteRule ^/tomcat/(.*)$ http://mydomain:8080/$1 [P] Yet, I am getting a HTTP 500: internal server error when requesting above URL. (Note: I decided to use a rewrite rule in order to at least get some information logged.) I have made mod_rewrite log extensively, and find following entries in the logs [note: due to a limitation of max. 2 URLs in posts of new users, I have modified all following URLs so that they only contain 1 slash after http:. In case you're suspecting typos: this was done on purpose): 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (2) init rewrite engine with requested uri /tomcat/testApp/ 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (3) applying pattern '^/tomcat/(.*)$' to uri '/tomcat/testApp/' 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (2) rewrite '/tomcat/testApp/' - 'http:/mydomain:8080/testApp/' 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (2) forcing proxy-throughput with http:/mydomain:8080/testApp/ 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (1) go-ahead with proxy request proxy:http:/mydomain:8080/testApp/ [OK] This suggests that the rewrite and proxy part is processed ok; still the proxied request produces a 500 error. Yet: Addressing the testApp directly via http:/mydomain:8080/testApp does work. The same setup does work on my local computer. Is there something else (Plesk-related, perhaps?) I should configure? Many thanks for any pointers! Ron

  Read the article

• Server 2008 R2 domain windows update strategy

  - by Joost Verdaasdonk

  Let me explain my question a bit. We are a small company that have now made the first move to a bigger network. For now the network contains of 5 servers 2008 R2 (dc,sql,web,etc..). Everything we need is now in place but for now we cannot afford to finish the network by implementing redundant systems. (secondary dc, dns, sql cluster, etc...) For some people this is hard to understand but this is the current situation. (and we are aware and will fix this when we can) Because we want to keep our system secure and up to date I've made sure that all systems are updated regularly. The problem is ofc that the nr of updates Microsoft rolls out that need a system reboot seam to occur more often. (maybe I'm wrong and it just feels like this) ;-) In our domain servers depend on each other for services (like SQL, WEB, or whatever) so just rebooting a server at will is NOT a good idea! For now I update all of them without rebooting at once. After all are up to date I bring them down in the order they are depended on each other. After this I reboot all of them in the inverse order. I understand ofc that if I DID have redundancy in my system that updating and rebooting would not be such a problem because the server task could be taken over by another node but this is something we generally need to add when we can. So my question is. If you read my above situation can you suggest me more Update strategies or general ideas that could help me do this process in a better / faster way? Thanks for your thoughts!

  Read the article

• Why is this setting for Name-based Virtual Host settings not working?

  - by Kave

  I have two domains (siteA.com & SiteB.com) that point to the same webserver and I would like to show different web pages for each. The steps I have taken so far are: Copy the default site (siteA) to siteB 1) sudo cp /etc/apache2/sites-available/default /etc/apache2/sites-available/siteB 2) sudo vim /etc/apache2/sites-available/siteB <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/siteB <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/siteB> Options Indexes FollowSymLinks MultiViews AllowOverride FileInfo Indexes Order allow,deny allow from all </Directory> </VirtualHost *:80> Then I created under /var/www/siteB and created a sample index.html in there. However when I load my domain siteB.com I still get directed to /var/www/siteA. Why is that? Do I have to rename the /etc/apache2/sites-available/default to /etc/apache2/sites-available/siteA as well? UPDATE: Thanks to the answer below it seems I had forgotten next to enabling the site also another entry: <VirtualHost *:80> ServerAdmin [email protected] ServerName siteB.com ServerAlias www.siteB.com </VirtualHost *:80> in order to include all subdomains as well then do: <VirtualHost *:80> ServerAdmin [email protected] ServerName siteB.com ServerAlias *.siteB.com </VirtualHost *:80> Same goes for siteA.

  Read the article

• AJP Connector Apache-Tomcat with php and java application

  - by Safari

  I have a question about proxy and ajp module. On my machine I have a Apache web server and a Tomcat servlet container. On Tomcat is running a my java webapplication. On Apache I have some services and I can call these in this way: http://myhos/service1 http://myhos/service2 http://myhos/service3 I would configurate a ajp connector to call my tomcat webapplication from Apache. I would somethin as http://myhost to call the Tomcat webapp. So, I configurated my apache in this way..and I have what I wanted: I can use http://myHost to visualize the Tomcat webApp by Apache. <VirtualHost *:80> ProxyRequests off ProxyPreserveHost On ServerAlias myserveralias ErrorLog logs/error.log CustomLog logs/access.log common <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /server-status ! ProxyPass /balancer-manager ! ProxyPass / balancer://mycluster/ stickysession=JSESSIONID nofailover=Off maxattempts=1 <Proxy balancer://mycluster> BalancerMember ajp://myIp:8009 min=10 max=100 route=portale loadfactor=1 ProxySet lbmethod=bytraffic </Proxy> <Location /balancer-manager> SetHandler balancer-manager Order deny,allow Allow from localhost </Location> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent </VirtualHost> But, now I can't use the apache services: If I use http://myhos/service1 I have an error because apache try to search service1 on my tomcatWebApp. Is there a way to fix it?

  Read the article

• LDAP Account Locked Out Sporadically after Password change - Finding the source of invalid attempts

  - by CityView

  On a small network of machines (<1000) we have a user whose account is being locked out after an indeterminate interval following a password change. We are having severe difficulties finding the source of the invalid logon attempts and I would appreciate it greatly if some of you could go through your thought process and the checks you would perform in order to fix the problem. All I know for sure is that the account is locked out several (5+) times a day, I can't even be sure it's due to failed login attempts as there is no record of failure until the account is locked. So far I have tried; Logging the account out of everything we can think of and back in with the new password Scanning the user's box for any non standard software which might perform an LDAP lookup Checking all installed services on our production boxes to check none are attempting to run under the account Changing the user back to their old password (Problem persists so perhaps password change is a red herring) Wireshark on a box where lots of LDAP authentication is performed - Rejects only occur after account is already locked out Clearing the credential cache in - Control Panel - User Accounts - Advanced Looking at the local I'm at a loss for what to try. I am happy to try any suggestions you have in order to diagnose the issue. I think my question boils down to a simple request; I need a technique for deriving the source (Application/Host) of the invalid login attempts which are causing the account to be locked. I'm not sure if that's even possible but I suspect there must be more I can try. Many thanks, CityView

  Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >