Search Results

Search found 59225 results on 2369 pages for 'windows edition'.

Page 180/2369 | < Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >

• Blue Screen at booting Windows 2000 virtual

  - by darkdog

  well i hope this stackexchange site is the right for my issue. I've an Oracle VirtualBox running on some acer pc Settings for the Acer PC: Windows 7 SP1 64bit Intel G630 @ 2.7Ghz 2GB RAM i used a .vhd image which contains a windows 2000 system with some preconfigured stuff and software for a customer. At the Windows boot time immediately after the "Loading Windows 2000..." - Screen i get the following Error: Sorry for the German Text but it say's something like "Check the Size of your HDD. If the error contains a driver, deactivate it and try again. Or change the graficcard" The HDD Size shouldn't be a problem in my honest opinion. Can anyone give me an adivce what i can try to do? I just tested the same combination of the .vhd image and oracle virtualbox on another computer. Same issue. Greetings

  Read the article

• Windows 7 system drive says it is raw, but System Recovery starts without issues

  - by Iulian Chira

  I have been running Windows 7 RC1 since it was available a couple of months ago and had no issues whatsoever until today. When I start my laptop, Windows does not boot but instead Windows System Recovery starts. I've used diskpart to list the partitions on the drive and my system partition (c:) has a RAW filesystem. I really need to save all data on the disk as fast as I cant and I would really like not to have to reinstall my system.

  Read the article

• Technet and trying to install Windows Server 2008 R2

  - by Simon E

  I'm a bit new to Technet and just trying to work my way round things. Firstly I want to install Windows Server 2008 R2 as I believe this is the latest edition - however when I look to download it from Technet, it will only allow me to download the Windows Automated Installation Kit. Does this have Windows Server 2008 R2 embedded in WAIK or is there some other extra step to do? Or am I just doing this all wrong :)

  Read the article

• Windows 7 - system error 5 problem

  - by ianhobson

  My wife has just had a new computer for Christmas (with an upgrade from VISTA to Windows 7), and has joined the home network. We are using a mix of WindowsXP and Ubuntu boxes linked via a switch. We are all in the same workgroup. (No domain). Internet access, DHCP, and DNS server is an SME server that thinks it is domain controller (although we are not using a domain). I need to run a script to back up my wife's machine (venus). In the past the script creates a share on a machine with lots of space (leda), and then executes the line. PSEXEC \\venus -u admin -p adminpassword -c -f d:\Progs\snapshot.exe C: \\leda\Venus\C-drive.SNA With the wife's old XP machine, this would run the sysinternals utility, copy shapshot,exe to her machine and run it, which would then back up her C: drive to the share on leda. I cannot get this to work with Windows 7, nor can I link through to the C$ share on her machine. This gives me a permissions error (system error 5). The admin account is a full admin account. And yes - I do know the password. The ordinary shares on her machine work fine! I guess I'm missing something that Microsoft have built into Windows 7 - but what? The machine is running Windows 7 business, with windows firewall, AVG anti virus, and all the crap-ware you get with a new PC removed. Thanks

  Read the article

• Cloning Windows 7 to Another Machine

  - by trobrock

  I am trying to clone a Windows 7 Install from one machine to others, in a computer lab situation. I have used clonezilla to make an image of the machine's harddrive and then attempted to write that image to a second machine's disk. Everything went fine, but when I try to boot Windows 7 on the second machine I get a blue screen flash and then it tries to run the startup repair tool, which runs unsuccessfully. Is there something new with Windows 7 that keeps it from being cloned like this?

  Read the article

• Resolve linux hostname in windows

  - by Martin Giffy D'Souza

  Hi, I have a simple home network with Windows 7 machines and Linux machines (Fedora 12 and 13). I'd like to be able to resolve the Linux machine names from the windows machine. For example: -- Windows 7 ping mylinuxmachine Currently this does not resolve. Any ideas? Thank you, Martin

  Read the article

• Can you install Ubuntu Server in a Windows PC VM on Windows 7?

  - by Lance Fisher

  I am running Windows 7 64-bit. I've installed Windows Virtual PC and Windows XP Mode successfully. Next, I downloaded Ubuntu Server 9.04 32-bit. I created a new virtual machine with a dynamically expanding .vhd, loaded the Ubuntu .iso, and booted the machine. I successfully made it through the install, but when the machine reboots, I get a segmentation fault. Here is a screenshot. Has anyone successfully installed Ubuntu on Windows Virtual PC?

  Read the article

• Crossover LAN connection between Ubuntu And Windows 7 is not working

  - by brett

  my question is closely related to: How do I connect Ubuntu 10.04 and Windows 7 with an Ethernet cable? What I am after is: Windows 7-------wireless-----\ Wifi router Ubuntu 10.04----wireless-----/ Windows 7-------wireless-----\ | cross_over_cable Wifi router | Ubuntu 10.04----wireless-----/ What I did was On Windows edit system32\drivers\etc\hosts Add the following line: 192.168.253.2 my_ubuntu_computer_name_&-wired //?not sure if this is right On Ubuntu: sudo gedit /etc/hosts Add the following line: 192.168.253.1 my_pc_computer_name&-wired //?not sure if this is right and then Ubuntu 12.04 as the host Right click on the Network Manager applet, click Edit Connections... In the Wired tab, click Auto eth0, then click Edit... In the IPv4 Settings tab, change Method: to Shared to other computers. Click Apply and enter your password when it asks you. Close everything and reboot. Plug the Ethernet cable into both computers. But, I can connect to my windows network folders from ubuntu via wifi I can't connect to my ubuntu network folders from windows via wifi(in fact this bit was working before - so my wifi connection is worse) my ubuntu Auto Ethernet seems to be on From Ubuntu eth0 Link encap:Ethernet HWaddr 00:11:2f:f3:43:8d inet addr:10.42.0.1 Bcast:10.42.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:2fff:fef3:438d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:172 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:27279 (27.2 KB) Interrupt:19 Base address:0xe400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1147 errors:0 dropped:0 overruns:0 frame:0 TX packets:1147 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:94380 (94.3 KB) TX bytes:94380 (94.3 KB) wlan0 Link encap:Ethernet HWaddr 00:03:c9:e9:6f:bf inet addr:10.1.1.7 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::203:c9ff:fee9:6fbf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13186 errors:0 dropped:0 overruns:0 frame:0 TX packets:12187 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1598882 (1.5 MB) TX bytes:1189555 (1.1 MB) From Windows: Windows IP Configuration Ethernet adapter Bluetooth Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : BoB Link-local IPv6 Address . . . . . : fe80::ecf7:c445:3725:b9c1%12 IPv4 Address. . . . . . . . . . . : 10.1.1.4 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.1.1.1 Tunnel adapter Local Area Connection* 15: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:1423:3ae3:f5fe:fefb Link-local IPv6 Address . . . . . : fe80::1423:3ae3:f5fe:fefb%23 Default Gateway . . . . . . . . . : :: Tunnel adapter isatap.BoB: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : BoB Tunnel adapter isatap.{D0C8EBA1-335D-4620-8570-6C36E8786D72}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :

  Read the article

• Radeon 6950 - Garbling of text and graphics in certain Windows only

  - by Greg

  This morning I noticed the text in Gmail (in Firefox 4) looked a little funny (kind of thin, maybe some color fringing). I went to work and thought it might be some ClearType issue or something with the way Direct way that FF4 draws to the screen. When I came back from work (I left the computer on), the problem was much worse - way beyond ClearType nit-picking. The text was barely readable. I opened Chrome and there was no such problem. It seems like only Windows that use hardware acceleration are garbled, and ones that use GDI are not. But, I fired up Dragon Age and didn't notice any problems (I only really looked at the main menu though). Here is a link to a screen shot that illustrates the problem. Notice how the Windows Live Mesh window is completely unreadable, the text in Firefox 4 (left) is pretty bad, while Chrome, the Windows Control Panel, and the task bar are perfectly fine. The fact that the problem shows up in screen shots and that it only happens in certain Windows makes me confident that the problem cannot be with the monitor or DVI cable. I am using the AMD Radeon drivers from 4/27/11. The card I have (MSI Frozr II) came with a slight overclock (810Mhz) out of the box, but it looks like when I'm on the Windows desktop it's not running at full clock (CCC reports 450Mhz). Still, I underclocked it to the stock reference clock (800Mhz) and it made no difference. The idle temperature according to Afterburner is 42-44 Celsius, which seems a tad high but not enough to cause a problem - it's cold to the touch if I open up the machine. What the heck could be causing this? The problem varies in intensity. As we speak I'm in Firefox and things look better than they did earlier - it'll probably get worse again soon. Radeon 6950 (MSI Frozr II), Seasonic X 560, Core i5 2500K at stock clockspeeds, 16GB RAM, Asus P8P67 M Pro

  Read the article

• Windows 8 doubling accents and diacritical marks

  - by Time Sheep

  I don't know what I installed, but I must have installed something that caused Windows to act this way. Normally when I press the button with either of the characters below ¨ ^ ~ ´ ` Windows types 2 of the character. Because of this, I cannot type in accented characters without using a keymap. Since my surname contains a diarhesis (U-umlaut), this feature is quite essential to me. Several of my friends claim to have had this problem before using Windows 7 as well, but never found a solution apart from reinstalling Windows. How do I get my beloved accented characters back?

  Read the article

• Windows 7 can't make back up

  - by J. Pablo Fernández

  I've been trying to get Windows 7 to make a backup for a week or so. I'm backing up to a local NAS and I'm getting this error: Windows Backup: Troubleshooting Options Check your backup Windows Backup could not create a zip file. This could be because the drive that Windows is installed on does not have enough space or it could be a temporary error. Make sure you have at least 400 MB of free space and try again. Backup time: 2009-09-07 14:48 Backup location: \VANGELIS\Shared\Backup\lennon\ Error code: 0x81000015 My local hard disk has 290GB free and my NAS has 200GB free. Any ideas what might be wrong?

  Read the article

• R: Is it possible to use RGL in x64 Windows?

  - by Thomas Bratt

  Is it possible to use the R package 'RGL' in x64 Windows? RGL Website

  Read the article

• Windows 7 Won't Boot

  - by Vie

  I recently built a new computer, my fifth one. ASUS Maximus III Formula LGA 1156 Intel P55 ATX Motherboard EVGA 01G-P3-1452-TR GeForce GTS 450 Superclocked 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Video Card COOLMAX RM-1000B 1000W ATX psu Intel Core i7-875K lynnfield 2.93GHz LGA 1156 95w Quad-Core unlocked processor G.SKILL Ripjaws Series 16 (4x4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) memory WD VelociRaptor WD3000GLFS 300gb 10000 RPM SATA 3.0Gb/s Hard Drive Sony Optiarc CD/DVD Burner model AD-7261S-0B LightScribe Windows 7 Home Premium 64-bit It gets hung up on the starting windows screen. When I went to install the OS it did the same thing wouldn't go past the windows logo, so I put the new HDD into my old computer and installed windows 7 thinking it was just an installer error. Put the fully installed HDD back into my new machine and it still gets stuck on the starting windows screen. I've tried most everything I've looked up. Disabled USB, Disabled Turbo Boost, Disabled everything that wasn't essential(just about every configuration I can think of), took it apart and put it back together, took all the ram out save one 4g stick(wouldn't even boot when I did this), did a memory scan which came back successful, I don't know what could be wrong. Only thing I can think of is a compatibility issue somewhere, but I've ran over it again and again and I don't know where there would be an issue like that. Need Backup! .<

  Read the article

• Can see partial encrypted in XP but not in windows 7

  - by RN09

  I used truecrypted V.6.3a to partially encrypted (5gb) on my 16gb usb flashdrive on my XP netbook and eveything was fine. However, I don't see the ecrypted partial (5gb) when stick the usb into windows 7-32 bits (desktop). Tried to re-encrypted the usb on windows 7 (desktop) but results are the same. No problem seeing it on XP but windows 7. Thanks

  Read the article

• Windows 7 Aero theme's "greyed out" - no found fix

  - by Robsta

  Brand new machine that was working fine then randomly it changed the theme when I booted into a sort of "basic" theme (white task bar, no see through windows etc) I've done and attempted many fixes and I still don't understand why it doesn't work. I've tried these two solutions: "How to enable Windows 7 Aero Theme" and "Windows 7 Aero Themes Greyed out" These solutions included registy changes, stopping/starting services, and force starting the aero theme. The closest I got seems to be when I went into: Control panel (category view) Find and fix problems (System and Security) Display Aero Desktop Effects I follow through the wizard and let it do its thing and then I get an error window that pops up: Personalization - "This theme can't be applied to the desktop. Try clicking a diffrent theme." That's what I get from the wizard. What can I do? My drivers are all up to date, there are no viruses on the computer, directx is installed and updated, and the registry is all correct. EDIT: When I boot the computer, I get a notification stating that windows failed to communicate with the windows desktop services.

  Read the article

• Windows: How to load and save sound schemes?

  - by Ashwin

  Windows users can change the sounds associated with program events using the dialog in Control Panel - Sound and Audio Properties - Sounds. Different sounds (or no sound) can be assigned to program events and the sound scheme can be saved. Where and how does Windows store its sound schemes? How do I export or save this sound scheme and load it somewhere else? (I am using Windows XP.)

  Read the article

• windows 7 numlock issues with rdp causes machine to go crazy

  - by rphilli5

  After going through a few rdp sessions to xp machines, when I come back to my local machine it appears some setting has been tripped so every key I type is registered as one of the function/alt keys plus the key I type, causing windows to open and close windows randomly and other erratic behavior. Pressing windows key and numlock returns everything to normal. Any ideas what causes this. I have experienced this on multiple win 7 machines, but never in vista or xp.

  Read the article

• Error 0x80073cf9 when installing or updating apps from windows store

  - by cmorse

  On my Windows 8 desktop I keep getting error 0x80073cf9 when I try to install or update an app from the windows store. In the installings apps pane it just says "This app wasn't installed -- view details" and when I select that it says "Something happened and this app couldn't be installed. Please try again. Error code: 0x80073cf9" I am using the built-in windows firewall and antivirus. And my laptop is able to install updates when it is on the same network. This is what winstore.log shows when I try to update the maps app: 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] *********************************************************************** 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Process name: C:\Windows\system32\taskhost.exe 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] User name: Desktop\User 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Computer name: desktop 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Windows build: 9200.16424.amd64fre.win8_gdr.120926-1855 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Client version: 615 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011428] CWSTileUpdateHandler::Worker: Broker is handling badge updates. 2012-10-18 15:31:47.554, _Info_ WS [00002572:00008200] CProgressDispatcher::OnProgress: AppId = 97a2179c-38be-45a3-933e-0d2dbf14a142, PFN = Microsoft.BingMaps_8wekyb3d8bbwe, InstallPhase = 1, PhasePercent = 0, TotalPercent = 0 2012-10-18 15:31:47.558, _Warning_ WS [00002572:00008200] CDownloadProgress::IDownloadCompletedCallback::Invoke: Download complete result 0x80073cf9 for Microsoft.BingMaps_8wekyb3d8bbwe 2012-10-18 15:31:47.559, _Error_ WS [00002572:00008200] CActionItem::_DoDownload: Download failed for 97a2179c-38be-45a3-933e-0d2dbf14a142, hr=0x80073cf9 2012-10-18 15:31:47.560, _Info_ WS [00002572:00008200] CActionItem::_DoDownload: Notifying progress handlers of download failure for 97a2179c-38be-45a3-933e-0d2dbf14a142, hr=0x80073cf9 2012-10-18 15:31:47.560, _Error_ WS [00002572:00008200] CProgressDispatcher::OnError: PFN = Microsoft.BingMaps_8wekyb3d8bbwe, InstallPhase = 1, hrError = 0x80073cf9

  Read the article

• Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

  - by WerkkreW

  Hello - I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified with SpeakEasy and Speedtest.net) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

  Read the article

• Make a bootable usb to install Windows XP from Linux

  - by Pablo Rosales

  I have a Dell Mini 9 with only Ubuntu installed, I want to install Windows XP also but I don't have and can't get an external CD drive, so I need to make a windows installation from the usb. All the tutorials I found use windows to make the usb bootable, how can I make the same from linux?

  Read the article

• reducing Windows 7 size

  - by Sejanus

  My Windows 7 uses around 16 GB while Windows XP only around 4 GB hard disk space. Seems weird. I use Windows only for gaming so I dont need a lot of stuff they have to offer. What is the best way to reduce Windows 7 size? What can I delete / uninstall and how? Also I'd like reduce RAM and processor usage as much as possible (as long as it doesnt hurt game performance)... turn off all that fancy stuff and so on. What can I turn off and how? Thanks in advance!

  Read the article

• What backup software for Windows?

  - by Piotr Dobrogost

  Do you know advanced backup software for Windows?

  Read the article

• Accessing Windows 7 Printer from Ubuntu Linux via LPR/LPD or Samba

  - by nitbuntu

  Hi, I'm having difficulty printing from my Linux (Ubuntu 10.04) based PC to a printer connected to a Windows 7 machine. I was trying to connect using Samba (version 3.5.6) but this always brings up an authentication screen which never accepts any password I use. So I read somewhere that an alternative is to access the Windows printer via LPR/LPD. I added an LPR/LPD printer in Windows 7, but even within Windows 7, I am not able to print as the print que monitor shows as 'printer busy'. The printer in question is an Epson Stylus DX7400 and works fine when using the standard USB ports....but doesn't when I use with the LPR/LPD ports. I even opened up the TCP/IP port 515 in my McAfee firewall without any success. Any help with this would be highly appreciated. Additionally, does anyone have any idea how I can get Samba working for me?

  Read the article

• Radeon 6950 - Garbling of text and graphics in certain Windows only

  - by Greg

  This morning I noticed the text in Gmail (in Firefox 4) looked a little funny (kind of thin, maybe some color fringing). I went to work and thought it might be some ClearType issue or something with the way Direct way that FF4 draws to the screen. When I came back from work (I left the computer on), the problem was much worse - way beyond ClearType nit-picking. The text was barely readable. I opened Chrome and there was no such problem. It seems like only Windows that use hardware acceleration are garbled, and ones that use GDI are not. But, I fired up Dragon Age and didn't notice any problems (I only really looked at the main menu though). Here is a link to a screen shot that illustrates the problem. Notice how the Windows Live Mesh window is completely unreadable, the text in Firefox 4 (left) is pretty bad, while Chrome, the Windows Control Panel, and the task bar are perfectly fine. The fact that the problem shows up in screen shots and that it only happens in certain Windows makes me confident that the problem cannot be with the monitor or DVI cable. I am using the AMD Radeon drivers from 4/27/11. The card I have (MSI Frozr II) came with a slight overclock (810Mhz) out of the box, but it looks like when I'm on the Windows desktop it's not running at full clock (CCC reports 450Mhz). Still, I underclocked it to the stock reference clock (800Mhz) and it made no difference. The idle temperature according to Afterburner is 42-44 Celsius, which seems a tad high but not enough to cause a problem - it's cold to the touch if I open up the machine. What the heck could be causing this? The problem varies in intensity. As we speak I'm in Firefox and things look better than they did earlier - it'll probably get worse again soon. Radeon 6950 (MSI Frozr II), Seasonic X 560, Core i5 2500K at stock clockspeeds, 16GB RAM, Asus P8P67 M Pro

  Read the article

• How to make schema dumps comparable between Windows and Linux

  - by Jonathan

  I have two systems running, one on linux and the other on windows. From the linux box, I ran pg_dump against both systems and dumped the schema. pg_dump command: pg_dump -h HOST -U USER -s -f /tmp/out.sql DB_NAME After I removed all of the "--" comments, I diffed the files together. Diff output snippet, linux compared to windows: - ADD CONSTRAINT sys_c004775 FOREIGN KEY (ruleid) REFERENCES rule(ruleid); + ADD CONSTRAINT sys_c004775 FOREIGN KEY (ruleid) REFERENCES "rule"(ruleid); The linux dump does not quote any entities and windows does. Is this a function of some encoding or just of a difference between windows and linux? Is there an option in pg_dump to make the output more consistent?

  Read the article

< Previous Page | 176 177 178 179 180 181 182 183 184 185 186 187  | Next Page >