Search Results

Search found 10878 results on 436 pages for 'changed'.

Page 181/436 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

  • PCI IDE Controller

    - by mercutio
    I have a suspicion that the onboard IDE controllers may not be working. Every disk I use to setup this machine reports as damaged (using a win xp installation to test, since it gets to partition setup fastest) So, I popped an IDE PCI Controller card in, to test with, but no drives are showing up in the bios now. I went into setup and changed the BIOS settings to disable onboard IDE1 and 2 to test, but still didn't detect the drives. How do I get that working? It's a standard PC with a 160GB disk and DVD Drive on master and slave channels on a single cable, if that helps. Let me know what else I need to state.

    Read the article

  • Run init.d script in the context of the current user session.

    - by akellehe
    I'd like to run a script in init.d (on Fedora) in the context of the user session I'm logging in as. I have a script called keyboard_deadkeys I wrote to set some deadkeys on my keyboard. The script is very simple: #!/bin/bash /usr/bin/xmodmap /home/julie/keymappings I put it in the directory /etc/init.d so it will run at boot time. It is also in /etc/rc.d/init.d I changed the permissions to a+rwx for good measure. When I boot; the deadkeys aren't set in the user's session. When I then run the script manually; the keys are set. How can I rectify this?

    Read the article

  • Restarting Nagios Using PHP

    - by X-Ware
    I am making a tool that is interacting with NAGIOS where some config files should be added so a restart will be needed. What I need to know is how to restart NAGIOS using PHP code since this tool is written in PHP .. when I try to do this using: shell_exec("service nagios restart"); changes do not take place but when I do this manually by the console all changes I did using the PHP script are applied ... after 2 minutes research I found that I am asking linux to execut this command while I am logged in as apache user so I changed the command to: shell_exec('echo "mypass" | sudo -S service nagios restart'); still having the same problem ... new config files are not read until I restart manually any suggestions will be appreciated :)

    Read the article

  • Any advice on what to do when getting a cryptic blue screen in windows?

    - by Svish
    What are some steps that you usually take? Are there any good ways of finding out what they mean etc.? For example I have gotten these ones where it pretty much only says "IRQ less or equal to" (or something like that) which I must say, doesn't really tell me much! Another one I got more recently was something in the lines of "Some application changed some files it shouldn't have". And there were of course no information on what files, or what application... What can you do?

    Read the article

  • How iptables behaves on timezone change?

    - by pradipta
    I have doubt how iptables keep changing the info in iptables when timezone is change. I am using iptables s v 1.4.8 I have blocked one IP with following details # date Thu Jun 6 12:46:42 IST 2013 #iptables -A INPUT -s 10.0.3.128 -m time --datestart 2013-6-6T12:0:00 --datestop 2013-6-6T13:0:00 -j DROP # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination DROP all -- 10.0.3.128 anywhere TIME starting from 2013-06-06 12:00:00 until date 2013-06-06 13:00:00 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination But after I change the timezone following things happened automatically . AFTER TIME ZONE CHANGE +++++++++++++++++++++++ #date Thu Jun 6 15:17:48 HKT 2013 # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination DROP all -- 10.0.3.128 anywhere TIME starting from 2013-06-06 14:30:00 until date 2013-06-06 15:30:00 Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination # The time value is changed in the rule . It is changing with the timezone how. Where iptables keeps track of timezone. Kindly explain me.

    Read the article

  • Can I convert my database/script to UTF-8 ?

    - by Mohannad Otaibi
    How can I convert a database to support UTF-8 and convert it's old data from what ever encoding they're in to UTF-8 ? Extra Info: I'm running a server which has many websites on it, and one of them is running WHMCS (php script to manage hosting clients). WHMCS has an iPhone application where i can browse it through iPhone, the problem is that this application will only run if everything in my website is in UTF-8 encoding. I was using windows-1256 as encoding in my script's settings, and i tried changing that in some point of time to UTF-8 for a while then changed it back to windows-1256 so, the data in the database are some inserted using UTF standards and most of them are windows-1256 If someone could clear the picture for me, Do I need to convert every database on the server or just one DB ? what should I change? If i had to do that manually, I'll do it but I need some expert advise.

    Read the article

  • sticky bit on NFS file system

    - by Kris_R
    I have a system where to the main server (homes, nfs, ntp, queue...) can log-in only root – all the other users use front-end host with NFS-mounted home directories (RW) and all other software directories (read-only). My problem is, that time to time, if root or normal user with sudo makes some administrative works on front-end some homes of normal users getting sticky bits (drwsr-sr-x). If it happens usually the user can't log-in (as long as permission for his home are not changed to drwxr-xr-x). The last time I saw it after compiling some new software (normal user configure;make) and installation from the same directory as root (su and make install or direct as normal user sudo make install). Can somebody explain me why it happens and what should I do to get rid of this problem? p.s. I'm using CentOS 5.7

    Read the article

  • Cannot login SQL Server after changing machine name

    - by Ucodia
    After installing and setting up new machines in a domain, we decided to rename one of them which had a SQL Server instance installed. So I changed the hostname, everything went fine regarding the domain but now, the server is logging a approximatively 2 SQL Server errors every 5 minutes and I cannot connect to the instance localy or from anywhere within the domain. Here is the error from the event log: SSPI handshake failed with error code 0x8009030c, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure. The logon attempt failed [CLIENT: x.x.x.x] Concerning the instance, everything is started and restarted without any extra error.

    Read the article

  • WIndows 7: would like recursively check a directory for changes to files and folders since my last visit

    - by user1026169
    I have found varieties of this question. Most of them fall under monitoring and others are said to be buggy. A continuously monitoring program won't help me and neither will a list of the most recently modified files. I would like to check if the directory, its sub folders and files have changed since my last visit. It seems to me that I'd likely need a program that maintains and index of that directory and compares it with its condition when I tell it to. Then that program could output to a log for my use. This is on Windows 7 over a shared network, the folder(s) I'd like to check have 4-50GB of data. I did find this, however I am still learning how to program. I think it describes what I want: http://www.rgagnon.com/javadetails/java-0490.html Thanks for considering.

    Read the article

  • FTP Folder Permissions / IIS8

    - by raam030
    I am having trouble copying information from one folder on an FTP site to another folder. Accessing the FTP site from a windows explorer. I have set Full Control over the parent folder, and I double checked...I have full control over the two folders that is trying to copy information from and to. It actually lets you right click and copy. Then when you try to go to another folder and right-click and paste, the paste option is grayed out. I was able to do it before and no one has changed the IIS permissions. I believe it's a Windows issue. Is it possible that even though the permissions are set to give full control over that directory, that something else is interfering? I did double check the IIS permissions. I am not on a domain, using anonymous access, made sure the access control is set to read/write.

    Read the article

  • Can't connect to localhost via browser. Can ping localhost.

    - by Sceptre
    I'm trying to connect to localhost through my browser to learn some apache tomcat stuff. When I tried to connect to localhost through Firefox, I couldn't; when I tried through IE, I could the first time, but not after that. I'm using Windows 7, and changed the hosts file to point localhost to 127.0.0.1. I can successfully ping localhost and 127.0.0.1. I have tried turning off my antivirus and my Windows Firewall, but to no avail. What am I doing wrong?

    Read the article

  • I Cannot connect to remote MySQL database using SSH tunnel

    - by Scott
    Brand new server, brand new MySQL 5.5 install on Ubuntu 12.04. I can log in to the database as root from the command line. I can log on via Navicat MySQL or Sequel Pro as root on port 3306 from my Mac. I cannot log in using an SSH tunnel to the server and then to the database as root. I have tried both localhost and 127.0.0.1 as server for the local connection part. My password is fine. root is currently defined at %, 127.0.0.1, and localhost. I have set up this same type of connection at least 30 times before and never had a problem. The SSH connection gets made with no problem, and then it just hangs trying to connect to the DB and finally times out. The only thing I changed in my.cnf was to comment out the bind-address = 127.0.0.1 line. Any help? Any Ideas?

    Read the article

  • Too Many ESTABLISHED connection from a single IP address in Apache

    - by ananthan
    netstat -ntp |grep 80 shows too many ESTABLISHED connection from single IP address. Around 300 of them and it is not an attack and user is using a 2G connection to access Apache. This is the case with other 2G connections also. As a result of this Apache is running out of children. Earlier it was showing too many close_wait and after enabling tcp_tw_reuse and tcp_tw-recycle there is not much close_wait but the number of ESTABLISHED connections increased. We are using Ubuntu 11.04 having 48 GB ram keepalive On keepalive timeout 10 max clients 800 max-request-perchild 4000 timeout 300 I have set syn_ack to 1 and syn_retries to 2. On wifi there is no such issue. Connections are closing properly, but with 2G connections Apache is running out of children and too many ESTABLISHED connection. also i have tried setting timeout from default 300 to 30,but since our project is image hosting for mobile phones,clients couldn't upload images properly as they are getting frequent time out.Also there were a lot of 408 messages so changed it to the default 300

    Read the article

  • How to enable Postfix filter on OS X server (Lion) without getting overwritten?

    - by mjbraun
    I have a Postfix after-queue content filter that works fine on stock Ubuntu Postfix install. However, on a OS X Lion Server I'm testing out, I see this "auto-generated" language in the master.cf file: # ==== Begin auto-generated section ======================================== # This section of the master.cf file is auto-generated by the Server Admin # Mail backend plugin whenever mails settings are modified. smtp inet n - n - 1 postscreen smtpd pass - - n - - smtpd -o receive_override_options=no_address_mappings The problem is, to enable the filter the same area of the master.cf file has to be changed to have an entry like this: smtp inet n - - - - smtpd -o content_filter=mytest_filter:dummy So, it looks like the line would be blown away every I make a change in Server Admin. Is there a better place for me to put the call to the filter such that it's persistent? I appreciate any assistance and/or guidance!

    Read the article

  • Domain Password change causes Outlook saved POP passwords to fail

    - by Mike
    I have a user that repeatedly has this issue. A 3 month password change is enforced on the domain, but when the user changes his, Office 2003 will re-ask for the POP account password, even though it has not changed. Entering the correct POP account password causes it to repeatedly fail. If you go and change the POP password and enter the new one, then it is fine. He's the only one with this issue, but also the only user with both an Exchange and POP account. Any ideas guys? Thanks in advance :)

    Read the article

  • Reasons why ports below 1024 cannot be opened

    - by Sitoplex
    I'm root on a machine I don't know how it was configured. I try to open SSHD on another port than 22 but it does not work. I changed the /etc/ssh/sshd_config file and added a new Port line extra to the Port 22. but it does only work when this second port is a number above 1024. Why is that? How can I find the reason? Infos: I'm restarting it using /etc/init.d/sshd restart as root. "netstat -apn" does not show the port is open by any other service (anyway I tried different ports and only above 1024 work). "telnet localhost port" also shows the service works only when they are above 1024. In iptables all tables are empty. Thanks!

    Read the article

  • domain works randomly

    - by mthenw
    Hi, I have problem with configuring bind9 on debian (lenny) server. Generaly speaking everything is working ok but sometimes I get 404 on few domains (eg. 4stopnie.com but after few refreshes in browser site loads) or I can't validate site with validator.w3.org (error '500 Can't connect to 4stopnie.com:80 (Bad hostname '4stopnie.com')'). Domains were moved from other server. After moving I changed serial number in zone file. $ttl 600 @ IN SOA ns.wpoznaniu.info. xxx.4stopnie.com. ( 2011011601 3600 600 86400 600) @ IN NS ns.wpoznaniu.info. @ IN A 80.82.21.196 www IN CNAME @

    Read the article

  • need help from some professional how to redirect old or invalid url

    - by kath
    I recently upgraded a site and almost all URLs have changed. I have redirected all of them (or so I hope) but it may be possible that some of them have slipped by me. Is there a way to somehow catch all invalid URLs and send the user to a certain page and somehow know what URL the person came from so I could log this, and fix those? I'm thinking I could use .htaccess somehow but am not sure how. I am using PHP Thanks so much! error file is already in .htaccess but seems nothing going to change you can see the error file as below AddHandler application/x-httpd-php5s .php ErrorDocument 404 /content/404.php RewriteEngine on RewriteBase / to see the problem what i want result is i need some thing to redirect if some one types wrong url just check the link even if you delete half of the location at the endof url it still opens http://adsbuz.com/classifieds/abu-dhabi-uae/ it sholud go to the error page but its not giong i neeed some kind force to push it to error page thanks

    Read the article

  • Using a BTHomeHub as a wireless booster

    - by Ploo
    I currently have a BT HomeHub downstairs but the wireless signal isnt strong enough on the second floor. I have an old BT HomeHub from the previous contract that I wanted to set up upstairs. I currently have an ethernet cable leading up into the old router. I then took my laptop and plugged it into the old router in hopes of configuring it but when I cannot reach api.home which is the address of the router. I cannot connect to the router wirelessly either since the password was changed and I'd have to change it through config. At this point I am completely stumped, any ideas?

    Read the article

  • Portable VirtualBox with Ubuntu on two machines

    - by eactor
    I have VirtualBox Portable installed from vbox.me. I moved it on a USB drive and added a virtual Ubuntu. It works fine on the computer I created it, but moving the usb drive to a different the Ubuntu does not start any more. I already changed location descriptions in <machine>.vbox and the VirtualBox.xml. When pressing Shift while starting the GRUB loader comes up, so I tried the recovery mode. Same here – startup freezes and nothing happens. Any hints for me? Last to happen in log file: 00:00:54.986 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=06aac000 w=640 h=480 bpp=32 cbLine=0xA00, flags=0x1 00:01:06.361 Display::handleDisplayResize(): uScreenId = 0, pvVRAM=00000000 w=720 h=400 bpp=0 cbLine=0x0, flags=0x1

    Read the article

  • connections on port 80 suddenly refused / server not responding

    - by user1394013
    my dedicated server stopped responding to requests on port 80 today out of sudden, i havent touched anything in more than a month. its ubuntu 10, varnish + nginx + php-fpm, only 1 website. load is at 0. i messaged my ISP if they changed something but no reply yet. i tried to access the site via http://web-sniffer.net/ and it times out on port 80, but if i connect directly to nginx on port 8080 it loads just fine. for normal users, it doesnt load on neither of these in normal browser. any tips what to check or what could be causing this?

    Read the article

  • External hard disk not showing up as removable media

    - by mark
    Windows 7 Pro x64, my external hard drive is a Western Digital Carviar Black. The hard drive is connected via USB (tried all my 2.0 and 3.0 ob my Gigabyte GA-X58A-UD7) but once I initialized it in the "disk management" (or whatever the proper term is; I'm using a German edition of Windows) I have to assign it a manual drive letter. Otherwise it doesn't show up. I'm confused because usually externally connected drives (be it USB sticks or real hard disks) just show up as "Removable media", but this one doesn't. Is this OK/expected? Will there be troubles when I go to another Windows computer? I formatted the drive with quick format and NTFS. I changed the permissions to have read/write for "Everyone" on that drive. thanks

    Read the article

  • Wifi Signal Strengths

    - by Phorce
    I hope that I have asked this question in the right topic. Basically I use BT (In the U.K.) and I have problems with my router receiving a strong signal in certain rooms of the house, which, therefore makes the internet really slow in some cases it won't work at all. I have had experience working with Virgin Media (UK) before and just changed the channel number and this worked fine, but, do not know if I would receive the same outcome on BT. Could anyone suggest any other things that I could try alongside of the channel change in order to /hopefully/ get a stronger signal, without having to install Ethernet cable?

    Read the article

  • Share files and catelog them across a server

    - by Ultan
    Hi all, here is what I am looking for, I use a number of software packages when creating online learning courses. I have a huge number of courses and they use text, audio files, images and video files. I am looking for somthing that I can install on our server and upload the content, index, tag and categorise and enter a description so that when a screen print has to be changed for example I can find all the places that I used the image so that I can go in and change the image without having to check every file that I have created over the last year. An open source solution would be great or something that isn't to expensive. Thank you for any suggestions you can make.

    Read the article

  • Windows Server 2003 - Give User Full Admin Privileges

    - by APShredder
    I am running Windows Server 2003. There are a couple of user accounts that I would like to promote to Administrator accounts. I've tried several ways to do so, but I am still relatively new to setting up a server. If anyone has any ideas on how to go about promoting these users, I thank you in advance. EDIT: I should probably mention that this a domain controller. I didn't realize that this changed the answer I was looking for. I apologize, like I said before I am new to the world of servers. EDIT #2: I've added the users to the Administrator group like most of the answer recommended, but the users don't seem to have admin rights yet. I think this might be because they are also in the Domain Users group, which I can't seem to be able to remove them from.

    Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >