Search Results

Search found 5597 results on 224 pages for 'sudo rm rf'.

Page 181/224 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

  • apt-get update very slow, stuck at "Waiting for headers"

    - by Liam
    I have looked at similar questions: Stuck at 0% [waiting for headers] (apt) apt-get update stuck on "Waiting for Headers" However neither one of them answer my problem. I am running 12.04 AMD64 and have recently started getting an issue that when I update my repos from my connection at home through a terminal, using sudo apt-get update, it takes forever (literally after 2 hours it was at 28%), however when I run from a different location it takes less than 5 minutes to complete. I have attempted changing which mirror I use but that does not solve the issue. I have also cut down what is in my sources list but this also makes no difference. There are no faults on my ADSL line as I have already contacted my ISP to check this. It also makes no difference if I use a WiFi or network cable connection. What could be my issue? A speed test (www.speedtest.net) comes out at about 0.9 Mbps down and 0.42 Mbps up (which is a shade under the advertised line speed), I reside in South Africa and use the UCT LEG server. But I have also tried the other mirrors available in SA....none of them make a difference.

    Read the article

  • Problems installing Ubuntu on a vaio with SSD, GRUB installation failure

    - by Alberto
    I have installed and used Ubuntu in several computers. But now I have a problem that I don't know how to solve. I have a Vaio (Product name: vpcz13c5e), it has a SSD 128gb. I decided to install Ubuntu (12.04, but I have tried older versions as well). Firstly, I tested with live USB, and everything was fine, so I decided go for the complete installation. Then everything went as follows: I chose to use the whole disk (first option, formatting everything). I got a message Executing 'grub-install' /deb/sdb failed. This is a fatal error After clicking ok I got another window with 3 options: the first offers different devices to install the bootloader on (I tried all of them and none works). Second option: Continue without a bootloader. In that case I got You will need to manually install a bootloader in order to start Ubuntu The third option is Cancel the installation. So, I chose Continue without a bootloader. Then I restart the computer (with the Live cd) and in a terminal type sudo fdisk -l but I obtain fdisk: unable to seek on /dev/sda: Invalid argument What can I do? any help will be appreciated.

    Read the article

  • please help me understand libraries/includes

    - by fiftyeight
    I'm trying to understand how libraries work. for example I downloaded a tarball and extracted it. Now I do "./configure", it searches in pre-defined directories from what I understand for certain library files. What does it do then? it creates a makefile, and the makefile contains the paths to these libraries? than I do "make", it complies the source code and hard-codes the locations of the libraries? am I correct? I do not really understand if libraries are files with pre-defined paths or the OS somehow gives access to the libraries through system calls. another example, I complied something on my computer than moved it to a remote server, the executable needs mysql libraries to work, the server has mysql but for some reason when execute the file it tells me "can't find libmysqlclient.so.16". is there a solution for this? is there a way to know where is tries to locate this file or give it another path? I can't compile it on the server since it has no compiler and I don't have root access to install packages last question is if in the sequence "./configure","make","make install" the "make install" command is the only one that actually puts files outside the directory in which these files reside? if for example the software will be installed in /usr/local/ is the "make install" command the only one that will require "sudo" before it? let me see if I got it correctly: "./configure" creates the Makefile according to the location of various files on your system. "make" compiles the source code according to this makefile. and "make install" moves the files to their appropriate location. I know this has been very long I thank anyone who had the patience to read my question :)

    Read the article

  • Software Center not Opening at all Error

    - by Newbie
    When I open software from menu, it says "cannot open software database. Please reinstall the software-center package. When I write software-center on terminal, such error comes: 2014-05-28 09:11:20,584 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'None' 2014-05-28 09:11:20,593 - softwarecenter.ui.gtk3.app - ERROR - xapian open failed Traceback (most recent call last): File "/usr/share/software-center/softwarecenter/ui/gtk3/app.py", line 302, in __init__ if self.db.schema_version() != DB_SCHEMA_VERSION: File "/usr/share/software-center/softwarecenter/db/database.py", line 289, in schema_version return self.xapiandb.get_metadata("db-schema-version") File "/usr/share/software-center/softwarecenter/db/database.py", line 177, in xapiandb self._db_per_thread[thread_name] = self._get_new_xapiandb() File "/usr/share/software-center/softwarecenter/db/database.py", line 190, in _get_new_xapiandb xapiandb = xapian.Database(self._db_pathname) File "/usr/lib/python2.7/dist-packages/xapian/__init__.py", line 3667, in __init__ _xapian.Database_swiginit(self,_xapian.new_Database(*args)) DatabaseCorruptError: /var/cache/software-center/xapian/iamchert: Chert version file should be 28 bytes, actually 0 Now, when I write command sudo apt-get remove software-center dpkg: error: corrupt info database format file '/var/lib/dpkg/info/format' E: Sub-process /usr/bin/dpkg returned an error code (2) I had ubuntu before but it kind of got corrupted. Now, I have freshly reinstalled it and even at start, software center is not opening and this error comes. I hope you have a solution. Thanks.

    Read the article

  • What is the proper way to install the 3.4 kernel?

    - by Marcelo Ruiz
    Kernel 3.2 has an annoying error for my wireless card (rtl8192se-b) that makes the connection drop and/or prevents the card to make a connection to the wireless router. Dealing with it was very frustrating until I found out the bug was corrected in 3.4. I downloaded: linux-headers-3.4.0-030400_3.4.0-030400.201205210521_all.deb linux-headers-3.4.0-030400_3.4.0-030400.201205210521_all.deb linux-image-3.4.0-030400-generic_3.4.0-030400.201205210521_amd64.deb and installed with: sudo dpkg -i * Now the wireless works fine, but I have two problems that cannot solve. The first one is minor: plymouth would not start at all. But if I boot with the 3.2 kernel it works fine. The second one is serious: sometimes the computer won't shut down or reboot. The X server terminates but the computer shows part of my grub background and will stay there forever using 100% of the CPU. I have a Toshiba Qosmio with an Core i7 and nvidia graphic card (using nvidia-current). During one shutdown, I briefly read a message that said that the virtualbox module couldn't be unloaded from the kernel. I tried to solve this by removing and purging virtualbox and installing it back. I don't see the message anymore, but sometimes the computer won't shutdown nor reboot. Am I missing something to properly configure the new kernels? Thanks!

    Read the article

  • Trying to migrate Windows 7 install of Adobe CS5 to Ubuntu 12.04 with Wine - 'Internal errors - invalid paramters received"

    - by Don
    I have Adobe CS5 installed and running on the Windows 7 side of my machine. Since I'd hate to boot up into Windows just to use Photoshop, I'm trying to get it in Ubuntu 12.04. Tutorials I found suggested that the easiest way to have it in Ubuntu was to install Wine, and copy my Windows installation over. Here are the exact steps I've done up to this point. From Windows, exported the registry key for HKEY_LOCAL_MACHINE SOFTWARE Adobe to the desktop. Changed to Ubuntu, downloaded Wine from Software Center Terminal: $ sudo apt-get install wine ttf-mscorefonts-installer $ winecfg $ wget http://www.kegel.com/wine/winetricks $ sh winetricks msxml6 gdiplus gecko vcrun2005sp1 vcrun2008 msxml3 atmlib Moved registry export to home folder. Copied "Program Files (x86)\Adobe" to "~/.wine/drive_c/Program Files (x86)/Adobe" "Program Files (x86)\Common Files\Adobe" to "~/.wine/drive_c/Program Files (x86)/Common Files/Adobe" "Documents and Settings\Don\Application Data\Adobe" to "~/.wine/drive_c/users/don/Application Data/Adobe" "Windows\System32\odbcint.dll" to "~/.wine/drive_c/windows/system32/odbcint.dll" ,and lastly "Windows\System32\odbc32.dll" to "~/.wine/drive_c/windows/system32/odbc32.dll". From Terminal, $ wine regedit adobe.reg. Right clicked on Photoshop.exe and selected "Open with Wine". Got the message "Wine Program Crash, Internal errors - invalid parameters received." So to restate my question, How can I get Photoshop running in Ubuntu 12.04? I'm not sold on doing it in this specific way, I just want to use Photoshop without having to reboot. What's the best way to make this happen? Edit: I do not have the installation CD, no.

    Read the article

  • 12.10 wants to install multiarch :i386-packages

    - by gspr
    I have an AMD64 system without any i386 multiarch packages. After successfully upgrading to 12.10, aptitude seems to want to install a few, and I can't tell why: $ sudo aptitude safe-upgrade Resolving dependencies... The following NEW packages will be installed: gcc-4.7-base:i386{a} libarmadillo3{a} libboost-date-time1.49-dev{a} libboost-serialization1.49-dev{a} libboost-serialization1.49.0{a} libboost-thread1.49-dev{a} libboost1.49-dev{a} libc6:i386{a} libgcc1:i386{a} libgdal1{a} libhdf5-7{a} libltdl7:i386{a} libnetcdfc7{a} libodbc1:i386{a} libreadline6:i386{a} libtinfo5:i386{a} odbcinst1debian2:i386{a} unixodbc:i386{a} Why libc6:i386, for example? I ask.. $ aptitude why libc6:i386 p icoutils:i386 Provides icoutils p icoutils:i386 Depends libc6:i386 (>= 2.8) ... alright, but why icoutils:i386? $ aptitude why icoutils:i386 p icoutils:i386 Provides icoutils But I already have the AMD64 version of icoutils: $ aptitude search icoutils i icoutils - Create and extract MS Windows icons and cursors p icoutils:i386 - Create and extract MS Windows icons and cursors Has some multiarch behavior changed recently, or am I just overlooking something? Addendum: Chasing down from gcc-4.7-base:i386, I'm led to qdbus:i386, which is up for installation since it provides qdbus... which I already have.

    Read the article

  • Stuck With grub rescue> console

    - by rej santos
    Here is the background of my issue: I just recently installed the latest version of Ubuntu along side with Windows 8 Enterprise. However upon checking the disk size, it seems that some of the portions of the hd memory were gone so I decided to check the disk partition and have seen that is was being used by another file system. Thinking that the Ubuntu takes it boots stuff from my drive C: , I deleted that partition and formated so I can use it to store some movies, music etc. Now, as I switch on my machine, I am stucked with: error: unknown filesystem grub rescue> I googled a lot and saw the following command which seems no to me like sudo, chainloader etc, all of these command only returns unknown command in the console. What I just wanted is to boot from my Windows 8 OS. Just to add, I can't open the BIOS menu so I could choose what media to boot. As I open my machine it automatically takes me to grub rescue console. Here are the thing I already have: Ubuntu Installation Disk Windows 8 System repair Disk I just don't know how to boot into these things. Let me know what to do.

    Read the article

  • Problem Installing Xubuntu 12.04 Audio-Video codecs

    - by Seib
    I used Crouton to install Xubuntu 12.04.4 LTS with the XFCE environment on my HP Chromebook 11. I've gotten it all fully installed and everything; the only thing I'm doing now is the basic setup things, like adding codecs and other things like LibreOffice, VLC, Firefox, Ubuntu Software Center, etc. This information I got from 2 sources: http://www.efytimes.com/e1/fullnews.asp?edid=137269 http://www.binarytides.com/better-xubuntu-14-04/ . I'm currently on the same step at both URLs, which is #6 on Link 1 and #8 on Link 2. Per the articles, which both said the same thing, I typed in sudo apt-get install xubuntu-restricted-extras libavcodec-extra and it didn't do anything. It just kept on saying the same thing: Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package libavcodec-extra I've spend the last hour or so scouring the internet for a solution, for a hint even at what is going on. I don't want to do a clean reinstall, for two reasons: 1) it's takes like 1.5h just to get the croot fully installed, and 2) everything but this out of what I've done so far (up to #6 at Link 1 & up to #8 at Link 2) works except the audio. I've already installed flash, so YouTube works fine. It's just I can't hear any audio. Please help? Thanks in advance. I appreciate all the great help I've been getting from AskUbuntu lately. You all are great.

    Read the article

  • Automatic TRIM vs. manual TRIM

    - by Eike Cochu
    I am currently trying to find out how to trim with my new TP and was wondering about the difference of manual/online trimming. Here is my setup: ThinkPad T430s with SSD Samsung 830, 128GB and Xubuntu 12.10, here are some outputs to check if trim will work on my system (got these from here: http://wiki.ubuntuusers.de/SSD/TRIM) root@eike-tp:~# sudo hdparm -I /dev/sda | grep -i TRIM * Data Set Management TRIM supported (limit 8 blocks) First, I tried the online trimming: How to enable TRIM? my fstab with discard inserted: UUID=d6c49c17-a4f1-466c-9f7e-896c20db3bba / ext4 discard,noatime,errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=a0322f5f-c6c1-4896-863f-668f0638d8cf none swap sw 0 0 tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 I tried to test if it works (but I don't get any zeroes when I try it with /dev/sda), but found out that this method is only possible with SSD type 2 and I seem to have type 3. So I don't know if it works or not. The Ubuntuwiki (first link) recommends manual trimming, so I set up a daily cronjob instead of discard: #!/bin/sh LOG=/var/log/batched_discard.log echo "*** $(date -R) ***" >> $LOG fstrim -v / >> $LOG the wiki article suggests weekly or daily. Now to my questions: How often executes the automated trim? How often is recommended? Online vs. manual trimming? Thank you for your help

    Read the article

  • Reverting problems caused by checkinstall with gcc build

    - by slavik262
    I recently downloaded the GCC 4.6.2 source in order to play around a bit with C++11. Having been told about checkinstall and its usefulness in installing programs from source, I created a Debian package from the install using sudo checkinstall -D make install. Wanting to see how well the newly created package worked, I removed it using Synaptic Package Manager. As it turns out, the package checkinstall created from make install tried to remove every single file the installation process touched, including shared gcc libraries like /lib64/libgcc_s.so. Despite not being able to run a bunch of programs due to this missing dependency, I was able to restore my system back to normal by reinstalling the package from command line using dpkg. At this point I want to remove the package from the package manager since it's so dangerous, but not remove the installed files. I was looking around in /var/lib/dpkg and found that the package manager seems to be based on text files which list packages and such - can I just remove all mention of the package from the files in /var/lib/dpkg, or is there a safer way to go about this?

    Read the article

  • wifi not working hp dv4

    - by Blaze
    i get this output for sudo lshw -C network : *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 06 serial: 3c:4a:92:cd:63:98 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:3000(size=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network DISABLED description: Wireless interface product: RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip] vendor: Ralink corp. physical id: 0 bus info: pci@0000:0a:00.0 logical name: wlan0 version: 00 serial: 90:00:4e:82:3c:5b width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.0.0-17-generic-pae firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c2500000-c250ffff i cant enable the wifi using the fn+f12 key.. its just stuck. In windows 7 it gets enabled when i press the same keys. but this happens after it gets booted up... i just want to use the wifi in anyway possible. can anybody help?

    Read the article

  • Best Practices - Core allocation

    - by jsavit
    This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (also called Logical Domains) Introduction SPARC T-series servers currently have up to 4 CPU sockets, each of which has up to 8 or (on SPARC T3) 16 CPU cores, while each CPU core has 8 threads, for a maximum of 512 dispatchable CPUs. The defining feature of Oracle VM Server for SPARC is that each domain is assigned CPU threads or cores for its exclusive use. This avoids the overhead of software-based time-slicing and emulation (or binary rewriting) of system state-changing privileged instructions used in traditional hypervisors. To create a domain, administrators specify either the number of CPU threads or cores that the domain will own, as well as its memory and I/O resources. When CPU resources are assigned at the individual thread level, the logical domains constraint manager attempts to assign threads from the same cores to a domain, and avoid "split core" situations where the same CPU core is used by multiple domains. Sometimes this is unavoidable, especially when domains are allocated and deallocated CPUs in small increments. Why split cores can matter Split core allocations can silenty reduce performance because multiple domains with different address spaces and memory contents are sharing the core's Level 1 cache (L1$). This is called false cache sharing since even identical memory addresses from different domains must point to different locations in RAM. The effect of this is increased contention for the cache, and higher memory latency for each domain using that core. The degree of performance impact can be widely variable. For applications with very small memory working sets, and with I/O bound or low-CPU utilization workloads, it may not matter at all: all machines wait for work at the same speed. If the domains have substantial workloads, or are critical to performance then this can have an important impact: This blog entry was inspired by a customer issue in which one CPU core was split among 3 domains, one of which was the control and service domain. The reported problem was increased I/O latency in guest domains, but the root cause might be higher latency servicing the I/O requests due to the control domain being slowed down. What to do about it Split core situations are easily avoided. In most cases the logical domain constraint manager will avoid it without any administrative action, but it can be entirely prevented by doing one of the several actions: Assign virtual CPUs in multiples of 8 - the number of threads per core. For example: ldm set-vcpu 8 mydomain or ldm add-vcpu 24 mydomain. Each domain will then be allocated on a core boundary. Use the whole core constraint when assigning CPU resources. This allocates CPUs in increments of entire cores instead of virtual CPU threads. The equivalent of the above commands would be ldm set-core 1 mydomain or ldm add-core 3 mydomain. Older syntax does the same thing by adding the -c flag to the add-vcpu, rm-vcpu and set-vcpu commands, but the new syntax is recommended. When whole core allocation is used an attempt to add cores to a domain fails if there aren't enough completely empty cores to satisfy the request. See https://blogs.oracle.com/sharakan/entry/oracle_vm_server_for_sparc4 for an excellent article on this topic by Eric Sharakan. Don't obsess: - if the workloads have minimal CPU requirements and don't need anywhere near a full CPU core, then don't worry about it. If you have low utilization workloads being consolidated from older machines onto a current T-series, then there's no need to worry about this or to assign an entire core to domains that will never use that much capacity. In any case, make sure the most important domains have their own CPU cores, in particular the control domain and any I/O or service domain, and of course any important guests. Summary Split core CPU allocation to domains can potentially have an impact on performance, but the logical domains manager tends to prevent this situation, and it can be completely and simply avoided by allocating virtual CPUs on core boundaries.

    Read the article

  • 10.10 boots to command line login prompt

    - by greggory.hz
    I recently installed Ubuntu 10.10 on a computer that was previously running 10.04 (that worked fine). Now, each time I boot up, it starts up in a command line login prompt. I can login and it stays at the command line (as expected). I can then manually start gdm with sudo start gdm and it works fine. I can also enable compiz (using proprietary nvidia drivers) so I'm reasonably confident that it's not a driver problem (at least not in the sense that the drivers just flat out aren't working). Interestingly, if I leave it at the command prompt without logging in, after about 5 or 10 minutes, gnome starts up on its own. I'm not sure what is causing this. This is what dmesg | tail gives me after a manual start of gdm: [ 15.664166] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.18 Tue Jan 18 21:46:26 PST 2011 [ 15.991304] type=1400 audit(1297543976.953:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=990 comm="apparmor_parser" [ 16.606986] eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 18.798506] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 26.740010] eth0: no IPv6 routers present [ 90.444593] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 189.252208] audit_printk_skb: 21 callbacks suppressed [ 189.252213] type=1400 audit(1297544150.218:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1876 comm="apparmor_parser" [ 189.252584] type=1400 audit(1297544150.218:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1876 comm="apparmor_parser" [ 351.159585] lo: Disabled Privacy Extensions

    Read the article

  • nvidia graphics resolution problem

    - by Deepak Adhikari
    I am currently using ubuntu 12.04 I have acer aspire timelinex 3830tg with 2GB nvidia GeForce GT540M graphics card To enable my graphics card I followed following steps. 1.) I activated nvidia_current and nvidia_current_updates from additional drivers 2.) sudo nvidia-xconfig 3.) then reboot Following these steps I got following errors 1.) my resolution is 640x480...(there is no option of 1366x768 in display...previously there was 1366x768 when nvidia-xconfig command was not entered) 2.) when I open nvidia-settings it shows me following error "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run 'nvidia-xconfig' as root) and restart the X server." Problem need to be solved 1.) Change resolution to 1366x768 2.) Also how to check my nvidia graphics working or not Please some one please help me to solve these issues...I am seriously in need of my graphics card... I wan't my nvidia graphics card work as my intel graphics smoothly I am not willing to use bumblebee with regards, ubuntu user

    Read the article

  • How to install rgdal on Ubuntu 12.10?

    - by radek
    I'm strugling to install rgdal library on Ubuntu 12.10. Installation from within R results in error: Error: gdal-config not found The gdal-config script distributed with GDAL could not be found. If you have not installed the GDAL libraries, you can download the source from http://www.gdal.org/ If you have installed the GDAL libraries, then make sure that gdal-config is in your path. Try typing gdal-config at a shell prompt and see if it runs. If not, use: --configure-args='--with-gdal-config=/usr/local/bin/gdal-config' with appropriate values for your installation. ERROR: configuration failed for package ‘rgdal’ * removing ‘/home/rdk/R/x86_64-pc-linux-gnu-library/2.15/rgdal’ Warning in install.packages : installation of package ‘rgdal’ had non-zero exit status R-sig-Geo, this two SE questions and other websites pointed me to the requirements of libgdal1-dev. But when I tried sudo apt-get install libgdal1-dev I end up with another error message Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libgdal1-dev : Depends: libgdal-dev but it is not going to be installed E: Unable to correct problems, you have held broken packages. Again - when I try to install libgdal-dev another dependencies error shows up The following packages have unmet dependencies: libgdal-dev : Depends: libgeos-dev but it is not going to be installed Depends: libspatialite-dev but it is not going to be installed Again trying libgeos-dev gives message: Depends: libgeos-c1 (= 3.3.3-1.1) but 3.3.3-2~precise2 is to be installed E: Unable to correct problems, you have held broken packages. and libspatialite-dev: Depends: libspatialite3 (= 3.1.0~rc2-1ubuntu1) but 3.1.0~rc2-2~precise1 is to be installed Is there any way to tame those dependencies and have rgdal running in Ubuntu? My sessionInfo() R version 2.15.1 (2012-06-22) Platform: x86_64-pc-linux-gnu (64-bit)

    Read the article

  • How to Install Windows Media Player 11 on Wine

    - by namkid
    I am battling to install Windows Media Player 11 on Wine. I have tried the following: Open a Terminal (Applications, Accessories, Terminal) and type "sudo apt-get install wine." This installs Wine Windows Emulator, a free application that allows you to run many Windows programs within Linux. Download Windows Media Player 11 for Windows XP (link in Resources) and save it to Ubuntu's desktop. Once downloaded, right-click and select "Open with Wine Windows Emulator." Follow the on-screen prompts for installing it to your system. Go to "Applications" then "Wine," select "Programs" and open "Windows Media Player." Click "File" then "Open" and locate a DRM file you want to play. Select "OK" to load it into Media Player. I installed Wine (Which is step 1). But I am having problems with step 2 (Download Windows Media Player 11 for Windows XP (link in Resources) and save it to Ubuntu's desktop). I'm just not finding a way to do it. I may be overlooking the (link in Resources) Can't find it. I am stuck!

    Read the article

  • Diablo 3 "freezes" periodically

    - by Shauna
    I'm running Diablo 3 (start edition, digital download) on the following: Ubuntu 12.04 64-bit (stock Unity, Gnome, etc; kernel version 3.2.0-29-generic) Wine version 1.5.11 (base, from Wine's PPA, game started with setarch i386 -3) Intel i7 920 CPU nVidia GTX260 with driver version 295.49 ("post-release updates" entry within the proprietary drivers tool), dual monitors 6GB RAM Every so often (and what appears to be at random), the game video will freeze up. I can still move the mouse, and it reacts to ctrl+alt+f2 to drop into text mode, but I can't get back to the desktop (which means I can check terminal to see what's going on after launching from terminal, especially since even in windowed mode, the secondary screen gets shut off by the game), and I can't continue to play the game. In order to get it running again, I have to restart lightdm, then relaunch the game (or, in a couple of rare cases, I had to restart the computer entirely, because running sudo service lightdmn [stop/start] doesn't appear to react). Turning down the video settings seems to have helped in some cases, but not all of them. Times it's frozen on me: The beginning of The Fallen Start quest part 6 - kill the Wretched Mother, right as you walk out of New Tristram and engage in the monsters on the northern path (repeatedly froze here until I adjusted the graphics down) Within the cinematic/event upon finding Deckard Cain While fighting the skeletons to protect Deckard Cain When about to enter Leoric's passage after Cain sends you back to where you found him That's as far as I've gotten through the game so far. Additionally, this doesn't happen on other games I play and seems to only occur with Diablo 3. Has anyone else run into this issue and know a possible cause or fix, or at least know where I can look (and what to look for) to figure out why this is happening?

    Read the article

  • Make the sound louder in Lubuntu

    - by Andrew
    I have a Toshiba r835 running Lubuntu 11.10. Turning the volume slider up all the way doesn't give very loud sound. I've tried typing alsamixer in a terminal and turning up all the levels there to maximum, but the speakers are still fairly quiet. Is there a simple way to increase maximum volume in software? I understand that there are physical limits to the sound the laptop's speakers can produce, but I suspect my maximum volume is limited by software. EDIT: This is exactly the type of solution I'm looking for. However, it doesn't work for me. What I did: sudo pico /etc/asound.conf This file does not exist, so I create a new one, containing: pcm.!default { type plug slave.pcm "softvol" } pcm.softvol { type softvol slave { pcm "dmix" } control { name "Pre-Amp" card 0 } min_dB -5.0 max_dB 20.0 resolution 6 } I reboot the machine, and type alsamixer. I use my left/right arrow keys to inspect the various volume options. I expect to see a new option, called Pre-Amp, but I don't see one. This fix seems to work for other people. Why doesn't this fix work for me?

    Read the article

  • Internal Mic not working on Dell Adamo 13

    - by AFD
    So I'm using Elementary Luna Beta (based on Ubuntu 12.04 LTS) on a spare HDD after successfully using Jupiter release (based on 10.10) for many years. In Jupiter I had my internal mic work out of the box and with Skype installed from deb it was all setup without having to step foot inside the terminal. In Luna Beta the internal mic is not recognised by the OS and so also not recognised by Skype. I believe the hardware is this (from sudo lshw): *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:46 memory:f8600000-f8603fff As well as this I ran cat /proc/asound/card0/codec* | grep Codec which gave me: Codec: IDT 92HD73C1X5 Codec: Intel Cantiga HDMI How do I tweak Luna to get this hardware working properly? I'm able to switch out my Luna HDD with the Jupiter HDD to help troubleshoot what the differences are between the two and why the more recent OS can't find / use the mic correctly. Thanks in advance for any help you can give.

    Read the article

  • Am I misunderstanding chown and chmod?

    - by isomorphismes
    I want to either extend the size of my guest partition or figure out how to copy stuff from the guest partition to my normal /home directory. (Because of some other problems I can only run Xorg as guest, but I can log into virtual console as myself or root.) Here's the motivation: I want to torrent a large file. It's larger than my guest filesystem. But I have plenty of space on my real drive, I just can't log into it graphically. So I tried to set up a "pipe" to get the file out of the tmpfs. I did: su -u myself #catch mkdir ~/receiver_dir sudo su cd /tmp/guest-lkj567UIO/ #throw ln -s mario_pipe /home/myself/receiver_dir chown -R guest-lkj567UIO /home/myself/receiver_dir chown -R guest-lkj567UIO /tmp/guest-lkj567UIO/mario_pipe chmod -R a+rw /home/myself/receiver_dir chmod -R a+rw /tmp/guest-lkj567UIO/mario_pipe su -u guest-lkj567UIO cd /tmp/guest-lkj567UIO cd mario_pipe touch something #success! However, when I try to torrent to /tmp/guest-lkj567UIO/mario_pipe, Transmission says I don't have write permissions. But it looks like I just wrote there? And that everybody (a+rw) can write there in fact? Maybe this indicates I don't actually understand chown and chmod but nothing from their man pages pops out.

    Read the article

  • KVM not installed?

    - by NJRandy
    When I run virt-manager, and click on the icon to create a new virtual machine, I get an error that KVM is not installed or is not loaded. I use Ubuntu GNOME 14.04 All qemu packages are version 2.0.0+dfsg-2ubuntu1 qemu-kvm and many other qemu packages installed... libvirt packages: 1.2.2-0ubuntu13.1 libvirt0 libvirt-bin libvirt-doc python-libvirt virt-manager 0.9.5-1ubuntu3 When I open terminal and enter lsmod | grep kvm I get nothing returned. No lines showing kvm or kvm_amd and no error of any kind. Hardware: Tyan S2877 with dual Opteron 285s I have the latest bios and don't see any setting in there to turn virtualization on or off. when I run sudo apt-get -s install qemu-kvm Here are the results: Reading package lists... Done Building dependency tree Reading state information... Done qemu-kvm is already the newest version. The following packages were automatically installed and are no longer required: kde-l10n-engb libgtk2-gladexml-perl libqt4-test libvncserver0 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. @jobin: the problem was my hardware. I just bought it a few months ago, although obviously used LOL

    Read the article

  • NVIDIA proprietary driver logging me to console instead of GUI

    - by Woozie
    Firstly i want to apologise for any mistakes, English is not my native language. My problem is I can't get NVIDIA proprietary drivers to work. I tried to install it on Ubuntu 12.04.1 32 and 64 bits, Ubuntu 12.10 Beta 2, Linux Mint 13 Cinnamon 64 bits and openSUSE 12.2 64 bits and the error code and symptoms (logging to tty1 instead of GUI logging, low-res bootscreen) are the same for all of these distros. Right, I didn't tell what's the error code. It appears on sudo startx. NVIDIA: could not open the device file /dev/nvidia0 (Input/output error). I know that's the common problem, but I tried to blacklist or even remove the noveau drivers, install NVIDIA driver from repo/from official script/in "Additional drivers", editing xorg.conf and using Xorg -configurate and nvidia-xconfig, actualizing the kernel and entire distro and many, many things that I don't remember. But the problem is even better: entire Cinnamon (Mint) is freezing during the work. I found the error code, which appears during the freeze: Oct 1 20:57:17 WoozieLaptop kernel: [ 308.120176] [drm] nouveau 0000:01:00.0: PFIFO_CACHE_ERROR - Ch 4/1 Mthd 0z0060 Data 0xbcef0201 My Xorg.0.log is here. It was made on Ubuntu 12.04.1 after installing NVIDIA drivers (obviously). inxi -G from Mint: Graphics: Card: NVIDIA GT216 [GeForce GT 240M] X.org: 1.11.3 drivers: (unloaded: nvidia) FAILED: nouveau,vesa,fbdev tty size: 80x25 Advanced Data: N/A for root out of X lspci -k | grep -A2 VGA from Mint: 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 240M] (rev a2) Subsystem: Lenovo Device 38ff Kernel driver in use: nvidia My hardware is: Lenovo IdeaPad Y550 Intel C2D T6600 NVIDIA GeForce GT 240M 4 GB of RAM Any help will be appreciated. This problem totally disabled my laptop from daily using. Cheers, Woozie

    Read the article

  • How can a usb be detected but not show up anywhere?

    - by George Mauer
    I started the morning by trying to create a bootable usb using a 2gb stick and the startup disk creator. It seemed to run through the whole process just fine until it got to a screen that read something like "Creating memory partion" and which sat on 100% for about 45 minutes before I hit cancel and removed the usb stick. Now the usb stick is not being detected as storage or...anything (even on my windows pc) though it does show up in the syslog. Allow me to demonstrate. We start with the usb not plugged in: [georgemauer@ubuntu:~]$ sudo fdisk -l (04-04 16:01) Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x994bdc0f Device Boot Start End Blocks Id System /dev/sda1 2048 27650047 13824000 27 Hidden NTFS WinRE /dev/sda2 * 27650048 27854847 102400 7 HPFS/NTFS/exFAT /dev/sda3 27854848 976771119 474458136 7 HPFS/NTFS/exFAT I plug in the usb: [georgemauer@ubuntu:~]$ tail -f /var/log/syslog ***Snip*** Apr 4 15:01:18 ubuntu wpa_supplicant[1136]: WPA: Group rekeying completed with 00:24:36:ad:e7:3f [GTK=TKIP] Apr 4 15:02:29 wpa_supplicant[1136]: last message repeated 3 times Apr 4 15:02:29 ubuntu kernel: [22122.788133] usb 2-1: new high speed USB device number 13 using ehci_hcd Apr 4 15:02:29 ubuntu kernel: [22122.923873] scsi10 : usb-storage 2-1:1.0 Apr 4 15:02:29 ubuntu mtp-probe: checking bus 2, device 13: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-1" Apr 4 15:02:30 ubuntu mtp-probe: bus: 2, device: 13 was not an MTP device Apr 4 15:02:30 ubuntu kernel: [22123.926154] scsi 10:0:0:0: Direct-Access GENERIC USB Mass Storage 1.00 PQ: 0 ANSI: 2 Apr 4 15:02:30 ubuntu kernel: [22124.105118] sd 10:0:0:0: Attached scsi generic sg1 type 0 Apr 4 15:02:30 ubuntu kernel: [22124.108212] sd 10:0:0:0: [sdb] Attached SCSI removable disk but then: [georgemauer@ubuntu:~]$ ls /mnt -alF (04-04 16:02) total 8 drwxr-xr-x 2 root root 4096 2011-04-21 12:51 ./ drwxr-xr-x 26 root root 4096 2012-03-31 13:16 ../ [georgemauer@ubuntu:~]$ ls /media -alF (04-04 16:03) total 8 drwxr-xr-x 2 root root 4096 2012-04-04 12:18 ./ drwxr-xr-x 26 root root 4096 2012-03-31 13:16 ../ What could be going on and how do I recover my usb key?

    Read the article

  • Problem installing drivers for Brother DCP-1400

    - by ToddB
    I have a problem installing drivers for my DCP-1400 printer. I am using Ubuntu 11.10 and am new to Ubuntu and Linux in general. I downloaded the lpr and cupswrapper files from the Brother linux site into my Download directory. I next run Terminal and switch to the Downloads directory. At the prompt I type in the following: sudo dpkg -i --force-all dcp1400lpr-1.1.2-1.386.deb It asks for my password which I type in and press Enter. I get the following errors: (Reading database ... 155195 files and directories currently installed.) Preparing to replace dcp1400lpr 1.1.2-1 (using dcp1400lpr-1.1.2-1.i386.deb) ... Unpacking replacement dcp1400lpr ... /var/lib/dpkg/info/dcp1400lpr.postrm: 3: /etc/init.d/lpd: not found dpkg: warning: subprocess old post-removal script returned error exit status 127 dpkg - trying script from the new package instead ... /var/lib/dpkg/tmp.ci/postrm: 3: /etc/init.d/lpd: not found dpkg: error processing dcp1400lpr-1.1.2-1.i386.deb (--install): subprocess new post-removal script returned error exit status 127 /var/lib/dpkg/tmp.ci/postrm: 3: /etc/init.d/lpd: not found dpkg: error while cleaning up: subprocess new post-removal script returned error exit status 127 Errors were encountered while processing: dcp1400lpr-1.1.2-1.i386.deb I now notice when I open the Synaptics package manager I get the message: E: The package dcp1400lpr needs to be reinstalled, but I can't find an archive for it. E: Internal error opening cache (1). Please report. Any help provided would be appreciated. Thank you TB

    Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >