Search Results

Search found 4640 results on 186 pages for 'unique'.

Page 181/186 | < Previous Page | 177 178 179 180 181 182 183 184 185 186  | Next Page >

• 12.04: Apt-Get Update: failure to fetch; can't connect to any sources

  - by weberc2

  I realize there are dozens of "apt-get update: failure to fetch" questions (I read through all I could find), but my present circumstance is unique to 12.04 and it affects all sources; not just launchpad. Additionally, I've tried several different servers in Europe and the U.S. as well as the "main server" (wherever that is) and they all yield the same result: I can't connect to any software sources. Additionally, I'm fairly certain the problem stems from the upgrade from 11.10-12.04 I performed this morning, as updates worked immediately before. Updates from the Update Manager worked fine and I could download some things (mutter) from the Software Center without incident, which makes me think I can connect to some subset of the Ubuntu servers (however, several other Ubuntu servers--like extras--and some canonical servers are listed as 'unable to connect'). Here is the output from sudo apt-get update: sudo apt-get update Ign http://ftp.u-picardie.fr precise InRelease Ign http://archive.canonical.com precise InRelease Ign http://ftp.u-picardie.fr precise-updates InRelease Ign http://ftp.u-picardie.fr precise-backports InRelease Err http://ftp.u-picardie.fr precise-security InRelease Err http://ftp.u-picardie.fr precise Release.gpg Unable to connect to ftp.u-picardie.fr:http: Err http://ftp.u-picardie.fr precise-updates Release.gpg Unable to connect to ftp.u-picardie.fr:http: Err http://ftp.u-picardie.fr precise-backports Release.gpg Unable to connect to ftp.u-picardie.fr:http: Err http://ftp.u-picardie.fr precise-security Release.gpg Unable to connect to ftp.u-picardie.fr:http: Hit http://archive.canonical.com precise Release.gpg Hit http://archive.canonical.com precise Release Hit http://archive.canonical.com precise/partner i386 Packages Ign http://archive.canonical.com precise/partner TranslationIndex Ign http://dl.google.com stable InRelease Ign http://dl.google.com stable InRelease Err http://archive.canonical.com precise/partner Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Err http://archive.canonical.com precise/partner Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Ign http://extras.ubuntu.com precise InRelease Get:1 http://dl.google.com stable Release.gpg [198 B] Err http://extras.ubuntu.com precise Release.gpg Could not connect to extras.ubuntu.com:80 (91.189.88.33). - connect (111: Connection refused) Ign http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Err http://ppa.launchpad.net precise InRelease Get:2 http://dl.google.com stable Release.gpg [198 B] Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Err http://ppa.launchpad.net precise Release.gpg Unable to connect to ppa.launchpad.net:http: Get:3 http://dl.google.com stable Release [1,347 B] Get:4 http://dl.google.com stable Release [1,347 B] Get:5 http://dl.google.com stable/main i386 Packages [1,268 B] Ign http://dl.google.com stable/main TranslationIndex Get:6 http://dl.google.com stable/main i386 Packages [769 B] Ign http://dl.google.com stable/main TranslationIndex Ign http://dl.google.com stable/main Translation-en_US Ign http://dl.google.com stable/main Translation-en Ign http://dl.google.com stable/main Translation-en_US Ign http://dl.google.com stable/main Translation-en Fetched 5,127 B in 7s (673 B/s) Reading package lists... Done W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-security/InRelease W: Failed to fetch http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/elementaryart/elementary-dev/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/midori/ppa/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/nemequ/sqlheavy/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/ricotz/docky/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/sgringwe/beatbox/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/webupd8team/y-ppa-manager/ubuntu/dists/precise/InRelease W: Failed to fetch http://ppa.launchpad.net/yorba/ppa/ubuntu/dists/precise/InRelease W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-updates/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-backports/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/dists/precise-security/Release.gpg Unable to connect to ftp.u-picardie.fr:http: W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://extras.ubuntu.com/ubuntu/dists/precise/Release.gpg Could not connect to extras.ubuntu.com:80 (91.189.88.33). - connect (111: Connection refused) W: Failed to fetch http://ppa.launchpad.net/caffeine-developers/ppa/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/elementaryart/elementary-dev/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/midori/ppa/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/nemequ/sqlheavy/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/ricotz/docky/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/sgringwe/beatbox/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/webupd8team/y-ppa-manager/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Failed to fetch http://ppa.launchpad.net/yorba/ppa/ubuntu/dists/precise/Release.gpg Unable to connect to ppa.launchpad.net:http: W: Some index files failed to download. They have been ignored, or old ones used instead. W: Duplicate sources.list entry http://ppa.launchpad.net/nemequ/sqlheavy/ubuntu/ precise/main i386 Packages (/var/lib/apt/lists/ppa.launchpad.net_nemequ_sqlheavy_ubuntu_dists_precise_main_binary-i386_Packages) W: Duplicate sources.list entry http://ppa.launchpad.net/sgringwe/beatbox/ubuntu/ precise/main i386 Packages (/var/lib/apt/lists/ppa.launchpad.net_sgringwe_beatbox_ubuntu_dists_precise_main_binary-i386_Packages) Contents of /etc/apt/sources.list: # deb cdrom:[Ubuntu 11.10 _Oneiric Ocelot_ - Release i386 (20111012)]/ oneiric main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise main restricted #Added by software-properties # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise multiverse universe #Added by software-properties ## Major bug fix updates produced after the final release of the ## distribution. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates restricted main multiverse universe #Added by software-properties ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise universe deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise multiverse deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-backports main restricted universe multiverse deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-backports main restricted universe multiverse #Added by software-properties deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security main restricted deb-src http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security restricted main multiverse universe #Added by software-properties deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security universe deb http://ftp.u-picardie.fr/mirror/ubuntu/ubuntu/ precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. # deb http://archive.canonical.com/ubuntu oneiric partner # deb-src http://archive.canonical.com/ubuntu oneiric partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb-src http://extras.ubuntu.com/ubuntu precise main Testing Alternate sources.list file These are the steps I followed to produce the following output: Please backup your sources.list: sudo cp /etc/apt/sources.list /etc/apt/sources.list.backup and then replace the contents of /etc/apt/sources.list with the below lines and run apt-get update: deb http://archive.ubuntu.com/ubuntu/ precise main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ precise-updates main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ precise-backports main restricted universe multiverse deb http://security.ubuntu.com/ubuntu precise-security main restricted universe multiverse deb http://archive.canonical.com/ubuntu precise partner deb http://extras.ubuntu.com/ubuntu precise main Output: someone@someone-UBook:~$ sudo apt-get update Ign http://archive.canonical.com precise InRelease Hit http://archive.canonical.com precise Release.gpg Hit http://archive.canonical.com precise Release Ign http://archive.ubuntu.com precise InRelease Ign http://extras.ubuntu.com precise InRelease Ign http://archive.ubuntu.com precise-updates InRelease Hit http://archive.canonical.com precise/partner i386 Packages Hit http://extras.ubuntu.com precise Release.gpg Ign http://archive.ubuntu.com precise-backports InRelease Ign http://archive.canonical.com precise/partner TranslationIndex Err http://archive.canonical.com precise/partner Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Err http://archive.canonical.com precise/partner Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] Hit http://extras.ubuntu.com precise Release Get:1 http://archive.ubuntu.com precise Release.gpg [198 B] Ign http://dl.google.com stable InRelease Err http://dl.google.com stable InRelease Err http://dl.google.com stable Release.gpg Unable to connect to dl.google.com:http: [IP: 173.194.34.38 80] Err http://dl.google.com stable Release.gpg Unable to connect to dl.google.com:http: [IP: 173.194.34.38 80] Get:2 http://archive.ubuntu.com precise-updates Release.gpg [198 B] Hit http://extras.ubuntu.com precise/main i386 Packages Get:3 http://archive.ubuntu.com precise-backports Release.gpg [198 B] Ign http://security.ubuntu.com precise-security InRelease Ign http://extras.ubuntu.com precise/main TranslationIndex Err http://extras.ubuntu.com precise/main Translation-en_US Unable to connect to extras.ubuntu.com:http: Err http://extras.ubuntu.com precise/main Translation-en Unable to connect to extras.ubuntu.com:http: Get:4 http://security.ubuntu.com precise-security Release.gpg [198 B] Get:5 http://archive.ubuntu.com precise Release [49.6 kB] Get:6 http://security.ubuntu.com precise-security Release [49.6 kB] Get:7 http://archive.ubuntu.com precise-updates Release [49.6 kB] Get:8 http://archive.ubuntu.com precise-backports Release [49.6 kB] Get:9 http://security.ubuntu.com precise-security/main i386 Packages [32.9 kB] Get:10 http://archive.ubuntu.com precise/main i386 Packages [1,274 kB] Get:11 http://security.ubuntu.com precise-security/restricted i386 Packages [14 B] Get:12 http://security.ubuntu.com precise-security/universe i386 Packages [8,594 B] Get:13 http://security.ubuntu.com precise-security/multiverse i386 Packages [1,393 B] Get:14 http://security.ubuntu.com precise-security/main TranslationIndex [73 B] Get:15 http://security.ubuntu.com precise-security/multiverse TranslationIndex [71 B] Get:16 http://security.ubuntu.com precise-security/restricted TranslationIndex [70 B] Get:17 http://security.ubuntu.com precise-security/universe TranslationIndex [72 B] Get:18 http://security.ubuntu.com precise-security/main Translation-en [13.6 kB] Get:19 http://security.ubuntu.com precise-security/multiverse Translation-en [587 B] Get:20 http://security.ubuntu.com precise-security/restricted Translation-en [14 B] Get:21 http://security.ubuntu.com precise-security/universe Translation-en [6,261 B] Get:22 http://archive.ubuntu.com precise/restricted i386 Packages [8,431 B] Get:23 http://archive.ubuntu.com precise/universe i386 Packages [4,796 kB] Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Ign http://ppa.launchpad.net precise InRelease Get:24 http://ppa.launchpad.net precise Release.gpg [316 B] Get:25 http://ppa.launchpad.net precise Release.gpg [316 B] Get:26 http://ppa.launchpad.net precise Release.gpg [316 B] Ign http://ppa.launchpad.net precise Release.gpg Get:27 http://ppa.launchpad.net precise Release.gpg [316 B] Hit http://ppa.launchpad.net precise Release.gpg Get:28 http://ppa.launchpad.net precise Release.gpg [316 B] Get:29 http://ppa.launchpad.net precise Release.gpg [316 B] Hit http://ppa.launchpad.net precise Release.gpg Get:30 http://ppa.launchpad.net precise Release.gpg [316 B] Hit http://ppa.launchpad.net precise Release.gpg Get:31 http://ppa.launchpad.net precise Release [11.9 kB] Get:32 http://ppa.launchpad.net precise Release [11.9 kB] Get:33 http://archive.ubuntu.com precise/multiverse i386 Packages [121 kB] Get:34 http://ppa.launchpad.net precise Release [11.9 kB] Ign http://ppa.launchpad.net precise Release Get:35 http://ppa.launchpad.net precise Release [11.9 kB] Hit http://archive.ubuntu.com precise/main TranslationIndex Hit http://archive.ubuntu.com precise/multiverse TranslationIndex Hit http://ppa.launchpad.net precise Release Hit http://archive.ubuntu.com precise/restricted TranslationIndex Get:36 http://ppa.launchpad.net precise Release [11.9 kB] Hit http://archive.ubuntu.com precise/universe TranslationIndex Get:37 http://ppa.launchpad.net precise Release [11.9 kB] Get:38 http://archive.ubuntu.com precise-updates/main i386 Packages [96.5 kB] Hit http://ppa.launchpad.net precise Release Get:39 http://ppa.launchpad.net precise Release [11.9 kB] Get:40 http://archive.ubuntu.com precise-updates/restricted i386 Packages [770 B] Hit http://ppa.launchpad.net precise Release Get:41 http://archive.ubuntu.com precise-updates/universe i386 Packages [27.7 kB] Get:42 http://ppa.launchpad.net precise/main Sources [524 B] Get:43 http://archive.ubuntu.com precise-updates/multiverse i386 Packages [1,393 B] Get:44 http://ppa.launchpad.net precise/main i386 Packages [507 B] Hit http://archive.ubuntu.com precise-updates/main TranslationIndex Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-updates/multiverse TranslationIndex Hit http://archive.ubuntu.com precise-updates/restricted TranslationIndex Get:45 http://ppa.launchpad.net precise/main Sources [932 B] Hit http://archive.ubuntu.com precise-updates/universe TranslationIndex Get:46 http://ppa.launchpad.net precise/main i386 Packages [1,017 B] Get:47 http://archive.ubuntu.com precise-backports/main i386 Packages [559 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Get:48 http://archive.ubuntu.com precise-backports/restricted i386 Packages [14 B] Get:49 http://archive.ubuntu.com precise-backports/universe i386 Packages [1,391 B] Get:50 http://ppa.launchpad.net precise/main Sources [1,402 B] Get:51 http://archive.ubuntu.com precise-backports/multiverse i386 Packages [14 B] Hit http://archive.ubuntu.com precise-backports/main TranslationIndex Get:52 http://ppa.launchpad.net precise/main i386 Packages [1,605 B] Hit http://archive.ubuntu.com precise-backports/multiverse TranslationIndex Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-backports/restricted TranslationIndex Hit http://archive.ubuntu.com precise-backports/universe TranslationIndex Hit http://archive.ubuntu.com precise/main Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise/multiverse Translation-en Get:53 http://ppa.launchpad.net precise/main Sources [931 B] Hit http://archive.ubuntu.com precise/restricted Translation-en Get:54 http://ppa.launchpad.net precise/main i386 Packages [1,079 B] Hit http://archive.ubuntu.com precise/universe Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-updates/main Translation-en Hit http://ppa.launchpad.net precise/main Sources Hit http://archive.ubuntu.com precise-updates/multiverse Translation-en Hit http://ppa.launchpad.net precise/main i386 Packages Hit http://archive.ubuntu.com precise-updates/restricted Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-updates/universe Translation-en Get:55 http://ppa.launchpad.net precise/main Sources [3,611 B] Hit http://archive.ubuntu.com precise-backports/main Translation-en Get:56 http://ppa.launchpad.net precise/main i386 Packages [2,468 B] Hit http://archive.ubuntu.com precise-backports/multiverse Translation-en Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://archive.ubuntu.com precise-backports/restricted Translation-en Hit http://archive.ubuntu.com precise-backports/universe Translation-en Get:57 http://ppa.launchpad.net precise/main Sources [1,524 B] Get:58 http://ppa.launchpad.net precise/main i386 Packages [2,719 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Hit http://ppa.launchpad.net precise/main Sources Hit http://ppa.launchpad.net precise/main i386 Packages Ign http://ppa.launchpad.net precise/main TranslationIndex Get:59 http://ppa.launchpad.net precise/main Sources [1,052 B] Get:60 http://ppa.launchpad.net precise/main i386 Packages [1,388 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Get:61 http://ppa.launchpad.net precise/main Sources [1,185 B] Get:62 http://ppa.launchpad.net precise/main i386 Packages [1,698 B] Ign http://ppa.launchpad.net precise/main TranslationIndex Err http://ppa.launchpad.net precise/main Sources 404 Not Found Err http://ppa.launchpad.net precise/main i386 Packages 404 Not Found Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Ign http://ppa.launchpad.net precise/main Translation-en_US Ign http://ppa.launchpad.net precise/main Translation-en Fetched 6,699 kB in 15s (445 kB/s) Reading package lists... Done W: Failed to fetch http://dl.google.com/linux/talkplugin/deb/dists/stable/InRelease W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en_US Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://archive.canonical.com/ubuntu/dists/precise/partner/i18n/Translation-en Unable to connect to archive.canonical.com:http: [IP: 91.189.92.150 80] W: Failed to fetch http://dl.google.com/linux/chrome/deb/dists/sta

  Read the article

• Quick guide to Oracle IRM 11g: Server configuration

  - by Simon Thorpe

  Quick guide to Oracle IRM 11g index Welcome to the second article in this quick quide to Oracle IRM 11g. Hopefully you've just finished the first article which takes you through deploying the software onto a Linux server. This article walks you through the configuration of this new service and contains a subset of information from the official documentation and is focused on installing the server on Oracle Enterprise Linux. If you are planning to deploy on a non-Linux platform, you will need to reference the documentation for platform specific information. Contents Introduction Create IRM WebLogic Domain Starting the Admin Server and initial configuration Introduction In the previous article the database was prepared, the WebLogic Application Server installed and the files required for an IRM server installed. But we don't actually have a configured system yet. We need to now create a WebLogic Domain in which the IRM server will run, then configure some of the settings and crypography so that we can create a context and be ready to seal some content and test it all works. This article doesn't cover the configuration of SSL communication from client to server. This is quite a big topic and a separate article has been dedicated for this area. In these articles I also use the hostname, irm.company.internal to reference the IRM server and later on use the hostname irm.company.com in reference to the public facing service. Create IRM WebLogic Domain First step is creating the WebLogic domain, in a console switch to the newly created IRM installation folder as shown below and we will run the domain configuration wizard. [oracle@irm /]$ cd /oracle/middleware/Oracle_IRM/common/bin [oracle@irm bin]$ ./config.sh First thing the wizard will ask is if you wish to create a new or extend an existing domain. This guide is creating a standalone system so you should select to create a new domain. Next step is to choose what technologies from the Oracle ECM Suite you wish this domain to host. You are only interested in selecting the option "Oracle Information Rights Management". When you select this check box you will notice that it also selects "Oracle Enterprise Manager" and "Oracle JRF" as these are dependencies of the IRM server. You then need to specify where you wish to place the domain files. I usually just change the domain name from base_domain or irm_domain and leave the others with their defaults. Now the domain will have a single user initially and by default this user is called "weblogic". I usually change this account name to "sysadmin" or "administrator", but in this guide lets just accept the default. With respects to the next dialog, again for eval or dev reasons, leave the server startup mode as development. The JDK should also be automatically detected. We now need to provide details of the database. This guide is using the Oracle 11gR2 database and the settings I used can be seen in the image to the right. There is a lot of configuration that can now be done for the admin server, any managed servers and where the deployments reside. In this guide I am leaving all of these to their defaults so do not check any of the boxes. However I will on this blog be detailing later how you can go back and setup things such as automated startup of an IRM server which require changes to these default settings. But for now, lets leave it all alone and just click next. Now we are ready to install. Note that from this dialog you can scroll the left window and see there are going to be two servers created from the defaults. The AdminServer which is where you modify settings for the WebLogic Server and also hosts the Oracle Enterprise Manager for IRM which allows to monitor the IRM service performance and also make service related settings (which we shortly do below) and the IRM_server1 which hosts the actual IRM services themselves. So go right ahead and hit create, the process is pretty quick and usually under 10 minutes. When the domain creation ends, it will give you the URL to the admin server. It's worth noting this down and the URL is usually; http://irm.company.internal:7001 Starting the Admin Server and initial configuration First thing to do is to start the WebLogic Admin server and review the initial IRM server settings. In this guide we are going to run the Admin server and IRM server in console windows, in another article I will discuss running these as background services. So for now, start a console and run the Admin server by doing the following. cd /oracle/middleware/user_projects/domains/irm_domain/ ./startWebLogic.sh Wait for the server to start, you are looking for the following line to be reported in the console window. <BEA-00360><Server started in RUNNING mode> First step is configuring the IRM service via Enterprise Manager. Now that the Admin server is running you can point a browser at http://irm.company.internal:7001/em. Login with the username and password you supplied when you created the domain. In Enterprise Manager the IRM service administrator is able to make server wide configuration. However finding where to access the pages with these settings can be a bit of a challenge. After logging in on the left you'll see a tree containing elements of the Enterprise Manager farm Farm_irm_domain. Open up Content Management, then Information Rights Management and finally select the IRM node. On the right then select the IRM menu item, navigate to the Administration section and now we have four options, for now, we are just going to look at General Settings. The image on the right proves that a picture is worth a thousand words (or 113 in this case). The General Settings page allows you to set the cryptographic algorithms used for protecting sealed content. Unless you have a burning need to increase the key lengths or you need to comply to a regulation or government mandate, AES192 is a good start. You can change this later on without worry. The most important setting here we need to make is the Server URL. In this blog article I go over why this URL is so important, basically every single piece of content you protect with Oracle IRM is going to have this URL embedded in it, so if it's wrong or unresolvable, then nobody can open the secured documents. Note that in our environment we have yet to do any SSL configuration of the service. If you intend to build a server without SSL, then use http as the protocol instead of https. But I would recommend using SSL and setting this up is described in the next article. I would also probably up the device count from 1 to 3. This means that any user can retrieve rights to access content onto 3 computers at any one time. The default of 1 doesn't really make sense in development, evaluation nor even production environments and my experience is that 3 is a better number. Next step is to create the keystore for the IRM server. When a classification (called a context) is created, Oracle IRM generates a unique set of symmetric keys which are used to secure the content itself. These keys are then encrypted with a set of "wrapper" asymmetric cryptography keys which are stored externally to the server either in a Java Key Store or a HSM. These keys need to be generated and the following shows my commands and the resulting output. I have greyed out the responses from the commands so you can see the input a little easier. [oracle@irmsrv ~]$ cd /oracle/middleware/wlserver_10.3/server/bin/ [oracle@irmsrv bin]$ ./setWLSEnv.sh CLASSPATH=/oracle/middleware/patch_wls1033/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/middleware/patch_ocp353/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java/jdk1.6.0_18/lib/tools.jar:/oracle/middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/middleware/modules/features/weblogic.server.modules_10.3.3.0.jar:/oracle/middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar: PATH=/oracle/middleware/wlserver_10.3/server/bin:/oracle/middleware/modules/org.apache.ant_1.7.1/bin:/usr/java/jdk1.6.0_18/jre/bin:/usr/java/jdk1.6.0_18/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oracle/bin Your environment has been set. [oracle@irmsrv bin]$ cd /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig/ [oracle@irmsrv fmwconfig]$ keytool -genkeypair -alias oracle.irm.wrap -keyalg RSA -keysize 2048 -keystore irm.jks Enter keystore password: Re-enter new password: What is your first and last name? [Unknown]: Simon Thorpe What is the name of your organizational unit? [Unknown]: Oracle What is the name of your organization? [Unknown]: Oracle What is the name of your City or Locality? [Unknown]: San Francisco What is the name of your State or Province? [Unknown]: CA What is the two-letter country code for this unit? [Unknown]: US Is CN=Simon Thorpe, OU=Oracle, O=Oracle, L=San Francisco, ST=CA, C=US correct? [no]: yes Enter key password for (RETURN if same as keystore password): At this point we now have an irm.jks in the directory /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig. The reason we store it here is this folder would be backed up as part of a domain backup. As with any cryptographic technology, DO NOT LOSE THESE KEYS OR THIS KEY STORE. Once you've sealed content against a context, the keys will be wrapped with these keys, lose these keys, and you can't get access to any secured content, pretty important. Now we've got the keys created, we need to go back to the IRM Enterprise Manager and set the location of the key store. Going back to the General Settings page in Enterprise Manager scroll down to Keystore Settings. Leave the type as JKS but change the location to; /oracle/Middleware/user_projects/domains/irm_domain/config/fmwconfig/irm.jks and hit Apply. The final step with regards to the key store is we need to tell the server what the password is for the Java Key Store so that it can be opened and the keys accessed. Once more fire up a console window and run these commands (again i've greyed out the clutter to see the commands easier). You will see dummy passed into the commands, this is because the command asks for a username, but in this instance we don't use one, hence the value dummy is passed and it isn't used. [oracle@irmsrv fmwconfig]$ cd /oracle/middleware/Oracle_IRM/common/bin/ [oracle@irmsrv bin]$ ./wlst.sh ... lots of settings fly by... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands wls:/offline>connect('weblogic','password','t3://irmsrv.us.oracle.com:7001') Connecting to t3://irmsrv.us.oracle.com:7001 with userid weblogic ... Successfully connected to Admin Server 'AdminServer' that belongs to domain 'irm_domain'. Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead. wls:/irm_domain/serverConfig>createCred("IRM","keystore:irm.jks","dummy","password") Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root. For more help, use help(domainRuntime)wls:/irm_domain/serverConfig>createCred("IRM","key:irm.jks:oracle.irm.wrap","dummy","password") Already in Domain Runtime Tree wls:/irm_domain/serverConfig> At last we are now ready to fire up the IRM server itself. The domain creation created a managed server called IRM_server1 and we need to start this, use the following commands in a new console window. cd /oracle/middleware/user_projects/domains/irm_domain/bin/ ./startManagedWebLogic.sh IRM_server1 This will start up the server in the console, unlike the Admin server, you need to provide the username and password for the service to start. Enter in your weblogic username and password when prompted. You can change this behavior by putting the password into a boot.properties file, read more about this in the WebLogic Server documentation. Once running, wait until you see the line; <Notice><WebLogicServer><BEA-000360><Server started in RUNNING mode> At this point we can now login to the Oracle IRM Management Website at the URL. http://irm.company.internal:1600/irm_rights/ The server is just configured for HTTP at the moment, no SSL involved. Just want to ensure we can get a working system up and running. You should now see a login like the image on the right and you can now login using your weblogic username and password. The next article in this guide goes over adding SSL and now testing your server by actually adding a few users, sealing some content and opening this content as a user.

  Read the article

• Setting up and using Bing Translate API Service for Machine Translation

  - by Rick Strahl

  Last week I spent quite a bit of time trying to set up the Bing Translate API service. I can honestly say this was one of the most screwed up developer experiences I've had in a long while - specifically related to the byzantine sign up process that Microsoft has in place. Not only is it nearly impossible to find decent documentation on the required signup process, some of the links in the docs are just plain wrong, and some of the account pages you need to access the actual account information once signed up are not linked anywhere from the administration UI. To make things even harder is the fact that the APIs changed a while back, with a completely new authentication scheme that's described and not directly linked documentation topic also made for a very frustrating search experience. It's a bummer that this is the case too, because the actual API itself is easy to use and works very well - fast and reasonably accurate (as accurate as you can expect machine translation to be). But the sign up process is a pain in the ass doubtlessly leaving many people giving up in frustration. In this post I'll try to hit all the points needed to set up to use the Bing Translate API in one place since such a document seems to be missing from Microsoft. Hopefully the API folks at Microsoft will get their shit together and actually provide this sort of info on their site… Signing Up The first step required is to create a Windows Azure MarketPlace account. Go to: https://datamarket.azure.com/ Sign in with your Windows Live Id If you don't have an account you will be taken to a registration page which you have to fill out. Follow the links and complete the registration. Once you're signed in you can start adding services. Click on the Data Link on the main page Select Microsoft Translator from the list This adds the Microsoft Bing Translator to your services. Pricing The page shows the pricing matrix and the free service which provides 2 megabytes for translations a month for free. Prices go up steeply from there. Pricing is determined by actual bytes of the result translations used. Max translations are 1000 characters so at minimum this means you get around 2000 translations a month for free. However most translations are probable much less so you can expect larger number of translations to go through. For testing or low volume translations this should be just fine. Once signed up there are no further instructions and you're left in limbo on the MS site. Register your Application Once you've created the Data association with Translator the next step is registering your application. To do this you need to access your developer account. Go to https://datamarket.azure.com/developer/applications/register Provide a ClientId, which is effectively the unique string identifier for your application (not your customer id!) Provide your name The client secret was auto-created and this becomes your 'password' For the redirect url provide any https url: https://microsoft.com works Give this application a description of your choice so you can identify it in the list of apps Now, once you've registered your application, keep track of the ClientId and ClientSecret - those are the two keys you need to authenticate before you can call the Translate API. Oddly the applications page is hidden from the Azure Portal UI. I couldn't find a direct link from anywhere on the site back to this page where I can examine my developer application keys. To find them you can go to: https://datamarket.azure.com/developer/applications You can come back here to look at your registered applications and pick up the ClientID and ClientSecret. Fun eh? But we're now ready to actually call the API and do some translating. Using the Bing Translate API The good news is that after this signup hell, using the API is pretty straightforward. To use the translation API you'll need to actually use two services: You need to call an authentication API service first, before you can call the actual translator API. These two APIs live on different domains, and the authentication API returns JSON data while the translator service returns XML. So much for consistency. Authentication The first step is authentication. The service uses oAuth authentication with a  bearer token that has to be passed to the translator API. The authentication call retrieves the oAuth token that you can then use with the translate API call. The bearer token has a short 10 minute life time, so while you can cache it for successive calls, the token can't be cached for long periods. This means for Web backend requests you typically will have to authenticate each time unless you build a more elaborate caching scheme that takes the timeout into account (perhaps using the ASP.NET Cache object). For low volume operations you can probably get away with simply calling the auth API for every translation you do. To call the Authentication API use code like this:/// /// Retrieves an oAuth authentication token to be used on the translate /// API request. The result string needs to be passed as a bearer token /// to the translate API. /// /// You can find client ID and Secret (or register a new one) at: /// https://datamarket.azure.com/developer/applications/ /// /// The client ID of your application /// The client secret or password /// public string GetBingAuthToken(string clientId = null, string clientSecret = null) { string authBaseUrl = https://datamarket.accesscontrol.windows.net/v2/OAuth2-13; if (string.IsNullOrEmpty(clientId) || string.IsNullOrEmpty(clientSecret)) { ErrorMessage = Resources.Resources.Client_Id_and_Client_Secret_must_be_provided; return null; } var postData = string.Format("grant_type=client_credentials&client_id={0}" + "&client_secret={1}" + "&scope=http://api.microsofttranslator.com", HttpUtility.UrlEncode(clientId), HttpUtility.UrlEncode(clientSecret)); // POST Auth data to the oauth API string res, token; try { var web = new WebClient(); web.Encoding = Encoding.UTF8; res = web.UploadString(authBaseUrl, postData); } catch (Exception ex) { ErrorMessage = ex.GetBaseException().Message; return null; } var ser = new JavaScriptSerializer(); var auth = ser.Deserialize<BingAuth>(res); if (auth == null) return null; token = auth.access_token; return token; } private class BingAuth { public string token_type { get; set; } public string access_token { get; set; } } This code basically takes the client id and secret and posts it at the oAuth endpoint which returns a JSON string. Here I use the JavaScript serializer to deserialize the JSON into a custom object I created just for deserialization. You can also use JSON.NET and dynamic deserialization if you are already using JSON.NET in your app in which case you don't need the extra type. In my library that houses this component I don't, so I just rely on the built in serializer. The auth method returns a long base64 encoded string which can be used as a bearer token in the translate API call. Translation Once you have the authentication token you can use it to pass to the translate API. The auth token is passed as an Authorization header and the value is prefixed with a 'Bearer ' prefix for the string. Here's what the simple Translate API call looks like:/// /// Uses the Bing API service to perform translation /// Bing can translate up to 1000 characters. /// /// Requires that you provide a CLientId and ClientSecret /// or set the configuration values for these two. /// /// More info on setup: /// http://www.west-wind.com/weblog/ /// /// Text to translate /// Two letter culture name /// Two letter culture name /// Pass an access token retrieved with GetBingAuthToken. /// If not passed the default keys from .config file are used if any /// public string TranslateBing(string text, string fromCulture, string toCulture, string accessToken = null) { string serviceUrl = "http://api.microsofttranslator.com/V2/Http.svc/Translate"; if (accessToken == null) { accessToken = GetBingAuthToken(); if (accessToken == null) return null; } string res; try { var web = new WebClient(); web.Headers.Add("Authorization", "Bearer " + accessToken); string ct = "text/plain"; string postData = string.Format("?text={0}&from={1}&to={2}&contentType={3}", HttpUtility.UrlEncode(text), fromCulture, toCulture, HttpUtility.UrlEncode(ct)); web.Encoding = Encoding.UTF8; res = web.DownloadString(serviceUrl + postData); } catch (Exception e) { ErrorMessage = e.GetBaseException().Message; return null; } // result is a single XML Element fragment var doc = new XmlDocument(); doc.LoadXml(res); return doc.DocumentElement.InnerText; } The first of this code deals with ensuring the auth token exists. You can either pass the token into the method manually or let the method automatically retrieve the auth code on its own. In my case I'm using this inside of a Web application and in that situation I simply need to re-authenticate every time as there's no convenient way to manage the lifetime of the auth cookie. The auth token is added as an Authorization HTTP header prefixed with 'Bearer ' and attached to the request. The text to translate, the from and to language codes and a result format are passed on the query string of this HTTP GET request against the Translate API. The translate API returns an XML string which contains a single element with the translated string. Using the Wrapper Methods It should be pretty obvious how to use these two methods but here are a couple of test methods that demonstrate the two usage scenarios:[TestMethod] public void TranslateBingWithAuthTest() { var translate = new TranslationServices(); string clientId = DbResourceConfiguration.Current.BingClientId; string clientSecret = DbResourceConfiguration.Current.BingClientSecret; string auth = translate.GetBingAuthToken(clientId, clientSecret); Assert.IsNotNull(auth); string text = translate.TranslateBing("Hello World we're back home!", "en", "de",auth); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } [TestMethod] public void TranslateBingIntegratedTest() { var translate = new TranslationServices(); string text = translate.TranslateBing("Hello World we're back home!","en","de"); Assert.IsNotNull(text, translate.ErrorMessage); Console.WriteLine(text); } Other API Methods The Translate API has a number of methods available and this one is the simplest one but probably also the most common one that translates a single string. You can find additional methods for this API here: http://msdn.microsoft.com/en-us/library/ff512419.aspx Soap and AJAX APIs are also available and documented on MSDN: http://msdn.microsoft.com/en-us/library/dd576287.aspx These links will be your starting points for calling other methods in this API. Dual Interface I've talked about my database driven localization provider here in the past, and it's for this tool that I added the Bing localization support. Basically I have a localization administration form that allows me to translate individual strings right out of the UI, using both Google and Bing APIs: As you can see in this example, the results from Google and Bing can vary quite a bit - in this case Google is stumped while Bing actually generated a valid translation. At other times it's the other way around - it's pretty useful to see multiple translations at the same time. Here I can choose from one of the values and driectly embed them into the translated text field. Lost in Translation There you have it. As I mentioned using the API once you have all the bureaucratic crap out of the way calling the APIs is fairly straight forward and reasonably fast, even if you have to call the Auth API for every call. Hopefully this post will help out a few of you trying to navigate the Microsoft bureaucracy, at least until next time Microsoft upends everything and introduces new ways to sign up again. Until then - happy translating… Related Posts Translation method Source on Github Translating with Google Translate without Google API Keys Creating a data-driven ASP.NET Resource Provider© Rick Strahl, West Wind Technologies, 2005-2013Posted in Localization  ASP.NET  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• jQuery and Windows Azure

  - by Stephen Walther

  The goal of this blog entry is to describe how you can host a simple Ajax application created with jQuery in the Windows Azure cloud. In this blog entry, I make no assumptions. I assume that you have never used Windows Azure and I am going to walk through the steps required to host the application in the cloud in agonizing detail. Our application will consist of a single HTML page and a single service. The HTML page will contain jQuery code that invokes the service to retrieve and display set of records. There are five steps that you must complete to host the jQuery application: Sign up for Windows Azure Create a Hosted Service Install the Windows Azure Tools for Visual Studio Create a Windows Azure Cloud Service Deploy the Cloud Service Sign Up for Windows Azure Go to http://www.microsoft.com/windowsazure/ and click the Sign up Now button. Select one of the offers. I selected the Introductory Special offer because it is free and I just wanted to experiment with Windows Azure for the purposes of this blog entry.     To sign up, you will need a Windows Live ID and you will need to enter a credit card number. After you finish the sign up process, you will receive an email that explains how to activate your account. Accessing the Developer Portal After you create your account and your account is activated, you can access the Windows Azure developer portal by visiting the following URL: http://windows.azure.com/ When you first visit the developer portal, you will see the one project that you created when you set up your Windows Azure account (In a fit of creativity, I named my project StephenWalther).     Creating a New Windows Azure Hosted Service Before you can host an application in the cloud, you must first add a hosted service to your project. Click your project on the summary page and click the New Service link. You are presented with the option of creating either a new Storage Account or a new Hosted Services.     Because we have code that we want to run in the cloud – the WCF Service -- we want to select the Hosted Services option. After you select this option, you must provide a name and description for your service. This information is used on the developer portal so you can distinguish your services.     When you create a new hosted service, you must enter a unique name for your service (I selected jQueryApp) and you must select a region for this service (I selected Anywhere US). Click the Create button to create the new hosted service.   Install the Windows Azure Tools for Visual Studio We’ll use Visual Studio to create our jQuery project. Before you can use Visual Studio with Windows Azure, you must first install the Windows Azure Tools for Visual Studio. Go to http://www.microsoft.com/windowsazure/ and click the Get Tools and SDK button. The Windows Azure Tools for Visual Studio works with both Visual Studio 2008 and Visual Studio 2010.   Installation of the Windows Azure Tools for Visual Studio is painless. You just need to check some agreement checkboxes and click the Next button a few times and installation will begin:   Creating a Windows Azure Application After you install the Windows Azure Tools for Visual Studio, you can choose to create a Windows Azure Cloud Service by selecting the menu option File, New Project and selecting the Windows Azure Cloud Service project template. I named my new Cloud Service with the name jQueryApp.     Next, you need to select the type of Cloud Service project that you want to create from the New Cloud Service Project dialog.   I selected the C# ASP.NET Web Role option. Alternatively, I could have picked the ASP.NET MVC 2 Web Role option if I wanted to use jQuery with ASP.NET MVC or even the CGI Web Role option if I wanted to use jQuery with PHP. After you complete these steps, you end up with two projects in your Visual Studio solution. The project named WebRole1 represents your ASP.NET application and we will use this project to create our jQuery application. Creating the jQuery Application in the Cloud We are now ready to create the jQuery application. We’ll create a super simple application that displays a list of records retrieved from a WCF service (hosted in the cloud). Create a new page in the WebRole1 project named Default.htm and add the following code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Products</title> <style type="text/css"> #productContainer div { border:solid 1px black; padding:5px; margin:5px; } </style> </head> <body> <h1>Product Catalog</h1> <div id="productContainer"></div> <script id="productTemplate" type="text/html"> <div> Name: {{= name }} <br /> Price: {{= price }} </div> </script> <script src="Scripts/jquery-1.4.2.js" type="text/javascript"></script> <script src="Scripts/jquery.tmpl.js" type="text/javascript"></script> <script type="text/javascript"> var products = [ {name:"Milk", price:4.55}, {name:"Yogurt", price:2.99}, {name:"Steak", price:23.44} ]; $("#productTemplate").render(products).appendTo("#productContainer"); </script> </body> </html> The jQuery code in this page simply displays a list of products by using a template. I am using a jQuery template to format each product. You can learn more about using jQuery templates by reading the following blog entry by Scott Guthrie: http://weblogs.asp.net/scottgu/archive/2010/05/07/jquery-templates-and-data-linking-and-microsoft-contributing-to-jquery.aspx You can test whether the Default.htm page is working correctly by running your application (hit the F5 key). The first time that you run your application, a database is set up on your local machine to simulate cloud storage. You will see the following dialog: If the Default.htm page works as expected, you should see the list of three products: Adding an Ajax-Enabled WCF Service In the previous section, we created a simple jQuery application that displays an array by using a template. The application is a little too simple because the data is static. In this section, we’ll modify the page so that the data is retrieved from a WCF service instead of an array. First, we need to add a new Ajax-enabled WCF Service to the WebRole1 project. Select the menu option Project, Add New Item and select the Ajax-enabled WCF Service project item. Name the new service ProductService.svc. Modify the service so that it returns a static collection of products. The final code for the ProductService.svc should look like this: using System.Collections.Generic; using System.ServiceModel; using System.ServiceModel.Activation; namespace WebRole1 { public class Product { public string name { get; set; } public decimal price { get; set; } } [ServiceContract(Namespace = "")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class ProductService { [OperationContract] public IList<Product> SelectProducts() { var products = new List<Product>(); products.Add(new Product {name="Milk", price=4.55m} ); products.Add(new Product { name = "Yogurt", price = 2.99m }); products.Add(new Product { name = "Steak", price = 23.44m }); return products; } } }   In real life, you would want to retrieve the list of products from storage instead of a static array. We are being lazy here. Next you need to modify the Default.htm page to use the ProductService.svc. The jQuery script in the following updated Default.htm page makes an Ajax call to the WCF service. The data retrieved from the ProductService.svc is displayed in the client template. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Products</title> <style type="text/css"> #productContainer div { border:solid 1px black; padding:5px; margin:5px; } </style> </head> <body> <h1>Product Catalog</h1> <div id="productContainer"></div> <script id="productTemplate" type="text/html"> <div> Name: {{= name }} <br /> Price: {{= price }} </div> </script> <script src="Scripts/jquery-1.4.2.js" type="text/javascript"></script> <script src="Scripts/jquery.tmpl.js" type="text/javascript"></script> <script type="text/javascript"> $.post("ProductService.svc/SelectProducts", function (results) { var products = results["d"]; $("#productTemplate").render(products).appendTo("#productContainer"); }); </script> </body> </html>   Deploying the jQuery Application to the Cloud Now that we have created our jQuery application, we are ready to deploy our application to the cloud so that the whole world can use it. Right-click your jQueryApp project in the Solution Explorer window and select the Publish menu option. When you select publish, your application and your application configuration information is packaged up into two files named jQueryApp.cspkg and ServiceConfiguration.cscfg. Visual Studio opens the directory that contains the two files. In order to deploy these files to the Windows Azure cloud, you must upload these files yourself. Return to the Windows Azure Developers Portal at the following address: http://windows.azure.com/ Select your project and select the jQueryApp service. You will see a mysterious cube. Click the Deploy button to upload your application.   Next, you need to browse to the location on your hard drive where the jQueryApp project was published and select both the packaged application and the packaged application configuration file. Supply the deployment with a name and click the Deploy button.     While your application is in the process of being deployed, you can view a progress bar.     Running the jQuery Application in the Cloud Finally, you can run your jQuery application in the cloud by clicking the Run button.   It might take several minutes for your application to initialize (go grab a coffee). After WebRole1 finishes initializing, you can navigate to the following URL to view your live jQuery application in the cloud: http://jqueryapp.cloudapp.net/default.htm The page is hosted on the Windows Azure cloud and the WCF service executes every time that you request the page to retrieve the list of products. Summary Because we started from scratch, we needed to complete several steps to create and deploy our jQuery application to the Windows Azure cloud. We needed to create a Windows Azure account, create a hosted service, install the Windows Azure Tools for Visual Studio, create the jQuery application, and deploy it to the cloud. Now that we have finished this process once, modifying our existing cloud application or creating a new cloud application is easy. jQuery and Windows Azure work nicely together. We can take advantage of jQuery to build applications that run in the browser and we can take advantage of Windows Azure to host the backend services required by our jQuery application. The big benefit of Windows Azure is that it enables us to scale. If, all of the sudden, our jQuery application explodes in popularity, Windows Azure enables us to easily scale up to meet the demand. We can handle anything that the Internet might throw at us.

  Read the article

• JMS Step 6 - How to Set Up an AQ JMS (Advanced Queueing JMS) for SOA Purposes

  - by John-Brown.Evans

  JMS Step 6 - How to Set Up an AQ JMS (Advanced Queueing JMS) for SOA Purposes .jblist{list-style-type:disc;margin:0;padding:0;padding-left:0pt;margin-left:36pt} ol{margin:0;padding:0} .c17_6{vertical-align:top;width:468pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c5_6{vertical-align:top;border-style:solid;border-color:#000000;border-width:1pt;padding:0pt 5pt 0pt 5pt} .c6_6{vertical-align:top;width:156pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c15_6{background-color:#ffffff} .c10_6{color:#1155cc;text-decoration:underline} .c1_6{text-align:center;direction:ltr} .c0_6{line-height:1.0;direction:ltr} .c16_6{color:#666666;font-size:12pt} .c18_6{color:inherit;text-decoration:inherit} .c8_6{background-color:#f3f3f3} .c2_6{direction:ltr} .c14_6{font-size:8pt} .c11_6{font-size:10pt} .c7_6{font-weight:bold} .c12_6{height:0pt} .c3_6{height:11pt} .c13_6{border-collapse:collapse} .c4_6{font-family:"Courier New"} .c9_6{font-style:italic} .title{padding-top:24pt;line-height:1.15;text-align:left;color:#000000;font-size:36pt;font-family:"Arial";font-weight:bold;padding-bottom:6pt} .subtitle{padding-top:18pt;line-height:1.15;text-align:left;color:#666666;font-style:italic;font-size:24pt;font-family:"Georgia";padding-bottom:4pt} li{color:#000000;font-size:10pt;font-family:"Arial"} p{color:#000000;font-size:10pt;margin:0;font-family:"Arial"} h1{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:24pt;font-family:"Arial";font-weight:normal} h2{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:18pt;font-family:"Arial";font-weight:normal} h3{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:14pt;font-family:"Arial";font-weight:normal} h4{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:12pt;font-family:"Arial";font-weight:normal} h5{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:11pt;font-family:"Arial";font-weight:normal} h6{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:10pt;font-family:"Arial";font-weight:normal} This post continues the series of JMS articles which demonstrate how to use JMS queues in a SOA context. The previous posts were: JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue JMS Step 3 - Using the QueueReceive.java Sample Program to Read a Message from a JMS Queue JMS Step 4 - How to Create an 11g BPEL Process Which Writes a Message Based on an XML Schema to a JMS Queue JMS Step 5 - How to Create an 11g BPEL Process Which Reads a Message Based on an XML Schema from a JMS Queue This example leads you through the creation of an Oracle database Advanced Queue and the related WebLogic server objects in order to use AQ JMS in connection with a SOA composite. If you have not already done so, I recommend you look at the previous posts in this series, as they include steps which this example builds upon. The following examples will demonstrate how to write and read from the queue from a SOA process. 1. Recap and Prerequisites In the previous examples, we created a JMS Queue, a Connection Factory and a Connection Pool in the WebLogic Server Console. Then we wrote and deployed BPEL composites, which enqueued and dequeued a simple XML payload. AQ JMS allows you to interoperate with database Advanced Queueing via JMS in WebLogic server and therefore take advantage of database features, while maintaining compliance with the JMS architecture. AQ JMS uses the WebLogic JMS Foreign Server framework. A full description of this functionality can be found in the following Oracle documentation Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server 11g Release 1 (10.3.6) Part Number E13738-06 7. Interoperating with Oracle AQ JMS http://docs.oracle.com/cd/E23943_01/web.1111/e13738/aq_jms.htm#CJACBCEJ For easier reference, this sample will use the same names for the objects as in the above document, except for the name of the database user, as it is possible that this user already exists in your database. We will create the following objects Database Objects Name Type AQJMSUSER Database User MyQueueTable Advanced Queue (AQ) Table UserQueue Advanced Queue WebLogic Server Objects Object Name Type JNDI Name aqjmsuserDataSource Data Source jdbc/aqjmsuserDataSource AqJmsModule JMS System Module AqJmsForeignServer JMS Foreign Server AqJmsForeignServerConnectionFactory JMS Foreign Server Connection Factory AqJmsForeignServerConnectionFactory AqJmsForeignDestination AQ JMS Foreign Destination queue/USERQUEUE eis/aqjms/UserQueue Connection Pool eis/aqjms/UserQueue 2. Create a Database User and Advanced Queue The following steps can be executed in the database client of your choice, e.g. JDeveloper or SQL Developer. The examples below use SQL*Plus. Log in to the database as a DBA user, for example SYSTEM or SYS. Create the AQJMSUSER user and grant privileges to enable the user to create AQ objects. Create Database User and Grant AQ Privileges sqlplus system/password as SYSDBA GRANT connect, resource TO aqjmsuser IDENTIFIED BY aqjmsuser; GRANT aq_user_role TO aqjmsuser; GRANT execute ON sys.dbms_aqadm TO aqjmsuser; GRANT execute ON sys.dbms_aq TO aqjmsuser; GRANT execute ON sys.dbms_aqin TO aqjmsuser; GRANT execute ON sys.dbms_aqjms TO aqjmsuser; Create the Queue Table and Advanced Queue and Start the AQ The following commands are executed as the aqjmsuser database user. Create the Queue Table connect aqjmsuser/aqjmsuser; BEGIN dbms_aqadm.create_queue_table ( queue_table = 'myQueueTable', queue_payload_type = 'sys.aq$_jms_text_message', multiple_consumers = false ); END; / Create the AQ BEGIN dbms_aqadm.create_queue ( queue_name = 'userQueue', queue_table = 'myQueueTable' ); END; / Start the AQ BEGIN dbms_aqadm.start_queue ( queue_name = 'userQueue'); END; / The above commands can be executed in a single PL/SQL block, but are shown as separate blocks in this example for ease of reference. You can verify the queue by executing the SQL command SELECT object_name, object_type FROM user_objects; which should display the following objects: OBJECT_NAME OBJECT_TYPE ------------------------------ ------------------- SYS_C0056513 INDEX SYS_LOB0000170822C00041$$ LOB SYS_LOB0000170822C00040$$ LOB SYS_LOB0000170822C00037$$ LOB AQ$_MYQUEUETABLE_T INDEX AQ$_MYQUEUETABLE_I INDEX AQ$_MYQUEUETABLE_E QUEUE AQ$_MYQUEUETABLE_F VIEW AQ$MYQUEUETABLE VIEW MYQUEUETABLE TABLE USERQUEUE QUEUE Similarly, you can view the objects in JDeveloper via a Database Connection to the AQJMSUSER. 3. Configure WebLogic Server and Add JMS Objects All these steps are executed from the WebLogic Server Administration Console. Log in as the webLogic user. Configure a WebLogic Data Source The data source is required for the database connection to the AQ created above. Navigate to domain > Services > Data Sources and press New then Generic Data Source. Use the values:Name: aqjmsuserDataSource JNDI Name: jdbc/aqjmsuserDataSource Database type: Oracle Database Driver: *Oracle’ Driver (Thin XA) for Instance connections; Versions:9.0.1 and later Connection Properties: Enter the connection information to the database containing the AQ created above and enter aqjmsuser for the User Name and Password. Press Test Configuration to verify the connection details and press Next. Target the data source to the soa server. The data source will be displayed in the list. It is a good idea to test the data source at this stage. Click on aqjmsuserDataSource, select Monitoring > Testing > soa_server1 and press Test Data Source. The result is displayed at the top of the page. Configure a JMS System Module The JMS system module is required to host the JMS foreign server for AQ resources. Navigate to Services > Messaging > JMS Modules and select New. Use the values: Name: AqJmsModule (Leave Descriptor File Name and Location in Domain empty.) Target: soa_server1 Click Finish. The other resources will be created in separate steps. The module will be displayed in the list.   Configure a JMS Foreign Server A foreign server is required in order to reference a 3rd-party JMS provider, in this case the database AQ, within a local WebLogic server JNDI tree. Navigate to Services > Messaging > JMS Modules and select (click on) AqJmsModule to configure it. Under Summary of Resources, select New then Foreign Server. Name: AqJmsForeignServer Targets: The foreign server is targeted automatically to soa_server1, based on the JMS module’s target. Press Finish to create the foreign server. The foreign server resource will be listed in the Summary of Resources for the AqJmsModule, but needs additional configuration steps. Click on AqJmsForeignServer and select Configuration > General to complete the configuration: JNDI Initial Context Factory: oracle.jms.AQjmsInitialContextFactory JNDI Connection URL: <empty> JNDI Properties Credential:<empty> Confirm JNDI Properties Credential: <empty> JNDI Properties: datasource=jdbc/aqjmsuserDataSource This is an important property. It is the JNDI name of the data source created above, which points to the AQ schema in the database and must be entered as a name=value pair, as in this example, e.g. datasource=jdbc/aqjmsuserDataSource, including the “datasource=” property name. Default Targeting Enabled: Leave this value checked. Press Save to save the configuration. At this point it is a good idea to verify that the data source was written correctly to the config file. In a terminal window, navigate to $MIDDLEWARE_HOME/user_projects/domains/soa_domain/config/jms  and open the file aqjmsmodule-jms.xml . The foreign server configuration should contain the datasource name-value pair, as follows:   <foreign-server name="AqJmsForeignServer">         <default-targeting-enabled>true</default-targeting-enabled>         <initial-context-factory>oracle.jms.AQjmsInitialContextFactory</initial-context-factory>         <jndi-property>           <key> datasource </key>           <value> jdbc/aqjmsuserDataSource </value>         </jndi-property>   </foreign-server> </weblogic-jms> Configure a JMS Foreign Server Connection Factory When creating the foreign server connection factory, you enter local and remote JNDI names. The name of the connection factory itself and the local JNDI name are arbitrary, but the remote JNDI name must match a specific format, depending on the type of queue or topic to be accessed in the database. This is very important and if the incorrect value is used, the connection to the queue will not be established and the error messages you get will not immediately reflect the cause of the error. The formats required (Remote JNDI names for AQ JMS Connection Factories) are described in the section Configure AQ Destinations  of the Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server document mentioned earlier. In this example, the remote JNDI name used is   XAQueueConnectionFactory  because it matches the AQ and data source created earlier, i.e. thin with AQ. Navigate to JMS Modules > AqJmsModule > AqJmsForeignServer > Connection Factories then New.Name: AqJmsForeignServerConnectionFactory Local JNDI Name: AqJmsForeignServerConnectionFactory Note: this local JNDI name is the JNDI name which your client application, e.g. a later BPEL process, will use to access this connection factory. Remote JNDI Name: XAQueueConnectionFactory Press OK to save the configuration. Configure an AQ JMS Foreign Server Destination A foreign server destination maps the JNDI name on the foreign JNDI provider to the respective local JNDI name, allowing the foreign JNDI name to be accessed via the local server. As with the foreign server connection factory, the local JNDI name is arbitrary (but must be unique), but the remote JNDI name must conform to a specific format defined in the section Configure AQ Destinations  of the Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server document mentioned earlier. In our example, the remote JNDI name is Queues/USERQUEUE , because it references a queue (as opposed to a topic) with the name USERQUEUE. We will name the local JNDI name queue/USERQUEUE, which is a little confusing (note the missing “s” in “queue), but conforms better to the JNDI nomenclature in our SOA server and also allows us to differentiate between the local and remote names for demonstration purposes. Navigate to JMS Modules > AqJmsModule > AqJmsForeignServer > Destinations and select New.Name: AqJmsForeignDestination Local JNDI Name: queue/USERQUEUE Remote JNDI Name:Queues/USERQUEUE After saving the foreign destination configuration, this completes the JMS part of the configuration. We still need to configure the JMS adapter in order to be able to access the queue from a BPEL processt. 4. Create a JMS Adapter Connection Pool in Weblogic Server Create the Connection Pool Access to the AQ JMS queue from a BPEL or other SOA process in our example is done via a JMS adapter. To enable this, the JmsAdapter in WebLogic server needs to be configured to have a connection pool which points to the local connection factory JNDI name which was created earlier. Navigate to Deployments > Next and select (click on) the JmsAdapter. Select Configuration > Outbound Connection Pools and New. Check the radio button for oracle.tip.adapter.jms.IJmsConnectionFactory and press Next. JNDI Name: eis/aqjms/UserQueue Press Finish Expand oracle.tip.adapter.jms.IJmsConnectionFactory and click on eis/aqjms/UserQueue to configure it. The ConnectionFactoryLocation must point to the foreign server’s local connection factory name created earlier. In our example, this is AqJmsForeignServerConnectionFactory . As a reminder, this connection factory is located under JMS Modules > AqJmsModule > AqJmsForeignServer > Connection Factories and the value needed here is under Local JNDI Name. Enter AqJmsForeignServerConnectionFactory  into the Property Value field for ConnectionFactoryLocation. You must then press Return/Enter then Save for the value to be accepted. If your WebLogic server is running in Development mode, you should see the message that the changes have been activated and the deployment plan successfully updated. If not, then you will manually need to activate the changes in the WebLogic server console.Although the changes have been activated, the JmsAdapter needs to be redeployed in order for the changes to become effective. This should be confirmed by the message Remember to update your deployment to reflect the new plan when you are finished with your changes. Redeploy the JmsAdapter Navigate back to the Deployments screen, either by selecting it in the left-hand navigation tree or by selecting the “Summary of Deployments” link in the breadcrumbs list at the top of the screen. Then select the checkbox next to JmsAdapter and press the Update button. On the Update Application Assistant page, select “Redeploy this application using the following deployment files” and press Finish. After a few seconds you should get the message that the selected deployments were updated. The JMS adapter configuration is complete and it can now be used to access the AQ JMS queue. You can verify that the JNDI name was created correctly, by navigating to Environment > Servers > soa_server1 and View JNDI Tree. Then scroll down in the JNDI Tree Structure to eis and select aqjms. This concludes the sample. In the following post, I will show you how to create a BPEL process which sends a message to this advanced queue via JMS. Best regards John-Brown Evans Oracle Technology Proactive Support Delivery

  Read the article

• SQLAuthority News – SQLPASS Nov 8-11, 2010-Seattle – An Alternative Look at Experience

  - by pinaldave

  I recently attended most prestigious SQL Server event SQLPASS between Nov 8-11, 2010 at Seattle. I have only one expression for the event - Best Summit Ever This year the summit was at its best. Instead of writing about my usual routine or the event, I am going to write about the interesting things I did and how I felt about it! Best Summit Ever Trip to Seattle! This was my second trip to Seattle this year and the journey is always long. Here is the travel stats on how long it takes to get to Seattle: 24 hours official air time 36 hours total travel time (connection waits and airport commute) Every time I travel to USA I gain a day and when I travel back to home, I lose a day. However, the total traveling time is around 3 days. The journey is long and very exhausting. However, it is all worth it when you’re attending an event like SQLPASS. Here are few things I carry when I travel for a long journey: Dry Snack packs – I like to have some good Indian Dry Snacks along with me in my backpack so I can have my own snack when I want Amazon Kindle – Loaded with 80+ books A physical book – This is usually a very easy to read book I do not watch movies on the plane and usually spend my time reading something quick and easy. If I can go to sleep, I go for it. I prefer to not to spend time in conversation with the guy sitting next to me because usually I end up listening to their biography, which I cannot blog about. Sheraton Seattle SQLPASS In any case, I love to go to Seattle as the city is great and has everything a brilliant metropolis has to offer. The new Light Train is extremely convenient, and I can take it directly from the airport to the city center. My hotel, the Sheraton, was only few meters (in the USA people count in blocks – 3 blocks) away from the train station. This time I saved USD 40 each round trip due to the Light Train. Sessions I attended! Well, I really wanted to attend most of the sessions but there was great dilemma of which ones to choose. There were many, many sessions to be attended and at any given time there was more than one good session being presented. I had decided to attend sessions in area performance tuning and I attended quite a few sessions this year, compared to what I was able to do last year. Here are few names of the speakers whose sessions I attended (please note, following great speakers are not listed in any order. I loved them and I enjoyed their sessions): Conor Cunningham Rushabh Mehta Buck Woody Brent Ozar Jonathan Kehayias Chris Leonard Bob Ward Grant Fritchey I had great fun attending their sessions. The sessions were meaningful and enlightening. It is hard to rate any session but I have found that the insights learned in Conor Cunningham’s sessions are the highlight of the PASS Summit. Rushabh Mehta at Keynote SQLPASS   Bucky Woody and Brent Ozar I always like the sessions where the speaker is much closer to the audience and has real world experience. I think speakers who have worked in the real world deliver the best content and most useful information. Sessions I did not like! Indeed there were few sessions I did not like it and I am not going to name them here. However, there were strong reasons I did not like their sessions, and here is why: Sessions were all theory and had no real world connections. All technical questions ended with confusing answers (lots of “I will get back to you on it,” “it depends,” “let us take this offline” and many more…) “I am God” kind of attitude in the speakers For example, I attended a session of one very well known speaker who is a specialist for one particular area. I was bit late for the session and was surprised to see that in a room that could hold 350 people there were only 30 attendees. After sitting there for 15 minutes, I realized why lots of people left. Very soon I found I preferred to stare out the window instead of listening to that particular speaker. One on One Talk! Many times people ask me what I really like about PASS. I always say the experience of meeting SQL legends and spending time with them one on one and LEARNING! Here is the quick list of the people I met during this event and spent more than 30 minutes with each of them talking about various subjects: Pinal Dave and Brad Shulz Pinal Dave and Rushabh Mehta Michael Coles and Pinal Dave Rushabh Mehta – It is always pleasure to meet with him. He is a man with lots of energy and a passion for community. He recently told me that he really wanted to turn PASS into resource for learning for every SQL Server Developer and Administrator in the world. I had great in-depth discussion regarding how a single person can contribute to a community. Michael Coles – I consider him my best friend. It is always fun to meet him. He is funny and very knowledgeable. I think there are very few people who are as expert as he is in encryption and spatial databases. Worth meeting him every single time. Glenn Berry – A real friend of everybody. He is very a simple person and very true to his heart. I think there is not a single person in whole community who does not like him. He is a friends of all and everybody likes him very much. I once again had time to sit with him and learn so much from him. As he is known as Dr. DMV, I can be his nurse in the area of DMV. Brad Schulz – I always wanted to meet him but never got chance until today. I had great time meeting him in person and we have spent considerable amount of time together discussing various T-SQL tricks and tips. I do not know where he comes up with all the different ideas but I enjoy reading his blog and sharing his wisdom with me. Jonathan Kehayias – He is drill sergeant in US army. If you get the impression that he is a giant with very strong personality – you are wrong. He is very kind and soft spoken DBA with strong performance tuning skills. I asked him how he has kept his two jobs separate and I got very good answer – just work hard and have passion for what you do. I attended his sessions and his presentation style is very unique.  I feel like he is speaking in a language I understand. Louis Davidson – I had never had a chance to sit with him and talk about technology before. He has so much wisdom and he is very kind. During the dinner, I had talked with him for long time and without hesitation he started to draw a schema for me on the menu. It was a wonderful experience to learn from a master at the dinner table. He explained to me the real and practical differences between third normal form and forth normal form. Honestly I did not know earlier, but now I do. Erland Sommarskog – This man needs no introduction, he is very well known and very clear in conveying his ideas. I learned a lot from him during the course of year. Every time I meet him, I learn something new and this time was no exception. Joe Webb – Joey is all about community and people, we had interesting conversation about community, MVP and how one can be helpful to community without losing passion for long time. It is always pleasant to talk to him and of course, I had fun time. Ross Mistry – I call him my brother many times because he indeed looks like my cousin. He provided me lots of insight of how one can write book and how he keeps his books simple to appeal to all the readers. A wonderful person and great friend. Ola Hallgren - I did not know he was coming to the summit. I had great time meeting him and had a wonderful conversation with him regarding his scripts and future community activities. Blythe Morrow – She used to be integrated part of SQL Server Community and PASS HQ. It was wonderful to meet her again and re-connect. She is wonderful person and I had a great time talking to her. Solid Quality Mentors – It is difficult to decide who to mention here. Instead of writing all the names, I am going to include a photo of our meeting. I had great fun meeting various members of our global branches. This year I was sitting with my Spanish speaking friends and had great fun as Javier Loria from Solid Quality translated lots of things for me. Party, Party and Parties Every evening there were various parties. I did attend almost all of them. Every party had different theme but the goal of all the parties the same – networking. Here are the few parties where I had lots of fun: Dell Reception Party Exhibitor Party Solid Quality Fun Party Red Gate Friends Party MVP Dinner Microsoft Party MVP Dinner Quest Party Gameworks PASS Party Volunteer Party at Garage Solid Quality Mentors (10 Members out of 120) They were all great networking opportunities and lots of fun. I really had great time meeting people at the various parties. There were few people everywhere – well, I will say I am among them – who hopped parties. NDA – Not Decided Agenda During the event there were few meetings marked “NDA.” Someone asked me “why are these things NDA?”  My response was simple: because they are not sure themselves. NDA stands for Not Decided Agenda. Toys, Giveaways and Luggage I admit, I was like child in Gameworks and was playing to win soft toys. I was doing it for my daughter. I must thank all of the people who gave me their cards to try my luck. I won 4 soft-toys for my daughter and it was fun. Also, thanks to Angel who did a final toy swap with me to get the desired toy for my daughter. I also collected ducks from Idera, as my daughter really loves them. Solid Quality Booth Each of the exhibitors was giving away something and I got so much stuff that my luggage got quite a bit bigger when I returned. Best Exhibitor Idera had SQLDoctor (a real magician and fun guy) to promote their new tool SQLDoctor. I really had a great time participating in the magic myself. At one point, the magician made my watch disappear.  I have seen better magic before, but this time it caught me unexpectedly and I was taken by surprise. I won many ducks again. The Common Question I heard the following common questions: I have seen you somewhere – who are you? – I am Pinal Dave. I did not know that Pinal is your first name and Dave is your last name, how do you pronounce your last name again? – Da-way How old are you? – I am as old as I can be. Are you an Indian because you look like one? – I did not answer this one. Where are you from? This question was usually asked after looking at my badge which says India. So did you really fly from India? – Yes, because I have seasickness so I do not prefer the sea journey. How long was the journey? – 24/36/12 (air travel time/total travel time/time zone difference) Why do you write on SQLAuthority.com? – Because I want to. I remember your daughter looks like you. – Is this even a question? Of course, she is daddy’s little girl. There were so many other questions, I will have to write another blog post about it. SQLPASS Again, Best Summit Ever! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: About Me, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology Tagged: SQLPASS

  Read the article

• Simple MSBuild Configuration: Updating Assemblies With A Version Number

  - by srkirkland

  When distributing a library you often run up against versioning problems, once facet of which is simply determining which version of that library your client is running.  Of course, each project in your solution has an AssemblyInfo.cs file which provides, among other things, the ability to set the Assembly name and version number.  Unfortunately, setting the assembly version here would require not only changing the version manually for each build (depending on your schedule), but keeping it in sync across all projects.  There are many ways to solve this versioning problem, and in this blog post I’m going to try to explain what I think is the easiest and most flexible solution.  I will walk you through using MSBuild to create a simple build script, and I’ll even show how to (optionally) integrate with a Team City build server.  All of the code from this post can be found at https://github.com/srkirkland/BuildVersion. Create CommonAssemblyInfo.cs The first step is to create a common location for the repeated assembly info that is spread across all of your projects.  Create a new solution-level file (I usually create a Build/ folder in the solution root, but anywhere reachable by all your projects will do) called CommonAssemblyInfo.cs.  In here you can put any information common to all your assemblies, including the version number.  An example CommonAssemblyInfo.cs is as follows: using System.Reflection; using System.Resources; using System.Runtime.InteropServices;   [assembly: AssemblyCompany("University of California, Davis")] [assembly: AssemblyProduct("BuildVersionTest")] [assembly: AssemblyCopyright("Scott Kirkland & UC Regents")] [assembly: AssemblyConfiguration("")] [assembly: AssemblyTrademark("")]   [assembly: ComVisible(false)]   [assembly: AssemblyVersion("1.2.3.4")] //Will be replaced   [assembly: NeutralResourcesLanguage("en-US")] .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   Cleanup AssemblyInfo.cs & Link CommonAssemblyInfo.cs For each of your projects, you’ll want to clean up your assembly info to contain only information that is unique to that assembly – everything else will go in the CommonAssemblyInfo.cs file.  For most of my projects, that just means setting the AssemblyTitle, though you may feel AssemblyDescription is warranted.  An example AssemblyInfo.cs file is as follows: using System.Reflection;   [assembly: AssemblyTitle("BuildVersionTest")] .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Next, you need to “link” the CommonAssemblyinfo.cs file into your projects right beside your newly lean AssemblyInfo.cs file.  To do this, right click on your project and choose Add | Existing Item from the context menu.  Navigate to your CommonAssemblyinfo.cs file but instead of clicking Add, click the little down-arrow next to add and choose “Add as Link.”  You should see a little link graphic similar to this: We’ve actually reduced complexity a lot already, because if you build all of your assemblies will have the same common info, including the product name and our static (fake) assembly version.  Let’s take this one step further and introduce a build script. Create an MSBuild file What we want from the build script (for now) is basically just to have the common assembly version number changed via a parameter (eventually to be passed in by the build server) and then for the project to build.  Also we’d like to have a flexibility to define what build configuration to use (debug, release, etc). In order to find/replace the version number, we are going to use a Regular Expression to find and replace the text within your CommonAssemblyInfo.cs file.  There are many other ways to do this using community build task add-ins, but since we want to keep it simple let’s just define the Regular Expression task manually in a new file, Build.tasks (this example taken from the NuGet build.tasks file). <?xml version="1.0" encoding="utf-8"?> <Project ToolsVersion="4.0" DefaultTargets="Go" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <UsingTask TaskName="RegexTransform" TaskFactory="CodeTaskFactory" AssemblyFile="$(MSBuildToolsPath)\Microsoft.Build.Tasks.v4.0.dll"> <ParameterGroup> <Items ParameterType="Microsoft.Build.Framework.ITaskItem[]" /> </ParameterGroup> <Task> <Using Namespace="System.IO" /> <Using Namespace="System.Text.RegularExpressions" /> <Using Namespace="Microsoft.Build.Framework" /> <Code Type="Fragment" Language="cs"> <![CDATA[ foreach(ITaskItem item in Items) { string fileName = item.GetMetadata("FullPath"); string find = item.GetMetadata("Find"); string replaceWith = item.GetMetadata("ReplaceWith"); if(!File.Exists(fileName)) { Log.LogError(null, null, null, null, 0, 0, 0, 0, String.Format("Could not find version file: {0}", fileName), new object[0]); } string content = File.ReadAllText(fileName); File.WriteAllText( fileName, Regex.Replace( content, find, replaceWith ) ); } ]]> </Code> </Task> </UsingTask> </Project> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If you glance at the code, you’ll see it’s really just going a Regex.Replace() on a given file, which is exactly what we need. Now we are ready to write our build file, called (by convention) Build.proj. <?xml version="1.0" encoding="utf-8"?> <Project ToolsVersion="4.0" DefaultTargets="Go" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <Import Project="$(MSBuildProjectDirectory)\Build.tasks" /> <PropertyGroup> <Configuration Condition="'$(Configuration)' == ''">Debug</Configuration> <SolutionRoot>$(MSBuildProjectDirectory)</SolutionRoot> </PropertyGroup>   <ItemGroup> <RegexTransform Include="$(SolutionRoot)\CommonAssemblyInfo.cs"> <Find>(?&lt;major&gt;\d+)\.(?&lt;minor&gt;\d+)\.\d+\.(?&lt;revision&gt;\d+)</Find> <ReplaceWith>$(BUILD_NUMBER)</ReplaceWith> </RegexTransform> </ItemGroup>   <Target Name="Go" DependsOnTargets="UpdateAssemblyVersion; Build"> </Target>   <Target Name="UpdateAssemblyVersion" Condition="'$(BUILD_NUMBER)' != ''"> <RegexTransform Items="@(RegexTransform)" /> </Target>   <Target Name="Build"> <MSBuild Projects="$(SolutionRoot)\BuildVersionTest.sln" Targets="Build" /> </Target>   </Project> Reviewing this MSBuild file, we see that by default the “Go” target will be called, which in turn depends on “UpdateAssemblyVersion” and then “Build.”  We go ahead and import the Bulid.tasks file and then setup some handy properties for setting the build configuration and solution root (in this case, my build files are in the solution root, but we might want to create a Build/ directory later).  The rest of the file flows logically, we setup the RegexTransform to match version numbers such as <major>.<minor>.1.<revision> (1.2.3.4 in our example) and replace it with a $(BUILD_NUMBER) parameter which will be supplied externally.  The first target, “UpdateAssemblyVersion” just runs the RegexTransform, and the second target, “Build” just runs the default MSBuild on our solution. Testing the MSBuild file locally Now we have a build file which can replace assembly version numbers and build, so let’s setup a quick batch file to be able to build locally.  To do this you simply create a file called Build.cmd and have it call MSBuild on your Build.proj file.  I’ve added a bit more flexibility so you can specify build configuration and version number, which makes your Build.cmd look as follows: set config=%1 if "%config%" == "" ( set config=debug ) set version=%2 if "%version%" == "" ( set version=2.3.4.5 ) %WINDIR%\Microsoft.NET\Framework\v4.0.30319\msbuild Build.proj /p:Configuration="%config%" /p:build_number="%version%" .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now if you click on the Build.cmd file, you will get a default debug build using the version 2.3.4.5.  Let’s run it in a command window with the parameters set for a release build version 2.0.1.453.   Excellent!  We can now run one simple command and govern the build configuration and version number of our entire solution.  Each DLL produced will have the same version number, making determining which version of a library you are running very simple and accurate. Configure the build server (TeamCity) Of course you are not really going to want to run a build command manually every time, and typing in incrementing version numbers will also not be ideal.  A good solution is to have a computer (or set of computers) act as a build server and build your code for you, providing you a consistent environment, excellent reporting, and much more.  One of the most popular Build Servers is JetBrains’ TeamCity, and this last section will show you the few configuration parameters to use when setting up a build using your MSBuild file created earlier.  If you are using a different build server, the same principals should apply. First, when setting up the project you want to specify the “Build Number Format,” often given in the form <major>.<minor>.<revision>.<build>.  In this case you will set major/minor manually, and optionally revision (or you can use your VCS revision number with %build.vcs.number%), and then build using the {0} wildcard.  Thus your build number format might look like this: 2.0.1.{0}.  During each build, this value will be created and passed into the $BUILD_NUMBER variable of our Build.proj file, which then uses it to decorate your assemblies with the proper version. After setting up the build number, you must choose MSBuild as the Build Runner, then provide a path to your build file (Build.proj).  After specifying your MSBuild Version (equivalent to your .NET Framework Version), you have the option to specify targets (the default being “Go”) and additional MSBuild parameters.  The one parameter that is often useful is manually setting the configuration property (/p:Configuration="Release") if you want something other than the default (which is Debug in our example).  Your resulting configuration will look something like this: [Under General Settings] [Build Runner Settings]   Now every time your build is run, a newly incremented build version number will be generated and passed to MSBuild, which will then version your assemblies and build your solution.   A Quick Review Our goal was to version our output assemblies in an automated way, and we accomplished it by performing a few quick steps: Move the common assembly information, including version, into a linked CommonAssemblyInfo.cs file Create a simple MSBuild script to replace the common assembly version number and build your solution Direct your build server to use the created MSBuild script That’s really all there is to it.  You can find all of the code from this post at https://github.com/srkirkland/BuildVersion. Enjoy!

  Read the article

• Coding With Windows Azure IaaS

  - by Hisham El-bereky

  This post will focus on some advanced programming topics concerned with IaaS (Infrastructure as a Service) which provided as windows azure virtual machine (with its related resources like virtual disk and virtual network), you know that windows azure started as PaaS cloud platform but regarding to some business cases which need to have full control over their virtual machine, so windows azure directed toward providing IaaS. Sometimes you will need to manage your cloud IaaS through code may be for these reasons: Working on hyper-cloud system by providing bursting connector to windows azure virtual machines Providing multi-tenant system which consume windows azure virtual machine Automated process on your on-premises or cloud service which need to utilize some virtual resources We are going to implement the following basic operation using C# code: List images Create virtual machine List virtual machines Restart virtual machine Delete virtual machine Before going to implement the above operations we need to prepare client side and windows azure subscription to communicate correctly by providing management certificate (x.509 v3 certificates) which permit client access to resources in your Windows Azure subscription, whilst requests made using the Windows Azure Service Management REST API require authentication against a certificate that you provide to Windows Azure More info about setting management certificate located here. And to install .cer on other client machine you will need the .pfx file, or if not exist by exporting .cer as .pfx Note: You will need to install .net 4.5 on your machine to try the code So let start This post built on the post sent by Michael Washam "Advanced Windows Azure IaaS – Demo Code", so I'm here to declare some points and to add new operation which is not exist in Michael's demo The basic C# class object used here as client to azure REST API for IaaS service is HttpClient (Provides a base class for sending HTTP requests and receiving HTTP responses from a resource identified by a URI) this object must be initialized with the required data like certificate, headers and content if required. Also I'd like to refer here that the code is based on using Asynchronous programming with calls to azure which enhance the performance and gives us the ability to work with complex calls which depends on more than one sub-call to achieve some operation The following code explain how to get certificate and initializing HttpClient object with required data like headers and content HttpClient GetHttpClient() { X509Store certificateStore = null; X509Certificate2 certificate = null; try { certificateStore = new X509Store(StoreName.My, StoreLocation.CurrentUser); certificateStore.Open(OpenFlags.ReadOnly); string thumbprint = ConfigurationManager.AppSettings["CertThumbprint"]; var certificates = certificateStore.Certificates.Find(X509FindType.FindByThumbprint, thumbprint, false); if (certificates.Count > 0) { certificate = certificates[0]; } } finally { if (certificateStore != null) certificateStore.Close(); }   WebRequestHandler handler = new WebRequestHandler(); if (certificate!= null) { handler.ClientCertificates.Add(certificate); HttpClient httpClient = new HttpClient(handler); //And to set required headers lik x-ms-version httpClient.DefaultRequestHeaders.Add("x-ms-version", "2012-03-01"); httpClient.DefaultRequestHeaders.Accept.Add(new MediaTypeWithQualityHeaderValue("application/xml")); return httpClient; } return null; }  Let us keep the object httpClient as reference object used to call windows azure REST API IaaS service. For each request operation we need to define: Request URI HTTP Method Headers Content body (1) List images The List OS Images operation retrieves a list of the OS images from the image repository Request URI https://management.core.windows.net/<subscription-id>/services/images] Replace <subscription-id> with your windows Id HTTP Method GET (HTTP 1.1) Headers x-ms-version: 2012-03-01 Body None.  C# Code List<String> imageList = new List<String>(); //replace _subscriptionid with your WA subscription String uri = String.Format("https://management.core.windows.net/{0}/services/images", _subscriptionid);  HttpClient http = GetHttpClient(); Stream responseStream = await http.GetStreamAsync(uri);  if (responseStream != null) {      XDocument xml = XDocument.Load(responseStream);      var images = xml.Root.Descendants(ns + "OSImage").Where(i => i.Element(ns + "OS").Value == "Windows");      foreach (var image in images)      {      string img = image.Element(ns + "Name").Value;      imageList.Add(img);      } } More information about the REST call (Request/Response) located here on this link http://msdn.microsoft.com/en-us/library/windowsazure/jj157191.aspx (2) Create Virtual Machine Creating virtual machine required service and deployment to be created first, so creating VM should be done through three steps incase hosted service and deployment is not created yet Create hosted service, a container for service deployments in Windows Azure. A subscription may have zero or more hosted services Create deployment, a service that is running on Windows Azure. A deployment may be running in either the staging or production deployment environment. It may be managed either by referencing its deployment ID, or by referencing the deployment environment in which it's running. Create virtual machine, the previous two steps info required here in this step I suggest here to use the same name for service, deployment and service to make it easy to manage virtual machines Note: A name for the hosted service that is unique within Windows Azure. This name is the DNS prefix name and can be used to access the hosted service. For example: http://ServiceName.cloudapp.net// 2.1 Create service Request URI https://management.core.windows.net/<subscription-id>/services/hostedservices HTTP Method POST (HTTP 1.1) Header x-ms-version: 2012-03-01 Content-Type: application/xml Body More details about request body (and other information) are located here http://msdn.microsoft.com/en-us/library/windowsazure/gg441304.aspx C# code The following method show how to create hosted service async public Task<String> NewAzureCloudService(String ServiceName, String Location, String AffinityGroup, String subscriptionid) { String requestID = String.Empty;   String uri = String.Format("https://management.core.windows.net/{0}/services/hostedservices", subscriptionid); HttpClient http = GetHttpClient();   System.Text.ASCIIEncoding ae = new System.Text.ASCIIEncoding(); byte[] svcNameBytes = ae.GetBytes(ServiceName);   String locationEl = String.Empty; String locationVal = String.Empty;   if (String.IsNullOrEmpty(Location) == false) { locationEl = "Location"; locationVal = Location; } else { locationEl = "AffinityGroup"; locationVal = AffinityGroup; }   XElement srcTree = new XElement("CreateHostedService", new XAttribute(XNamespace.Xmlns + "i", ns1), new XElement("ServiceName", ServiceName), new XElement("Label", Convert.ToBase64String(svcNameBytes)), new XElement(locationEl, locationVal) ); ApplyNamespace(srcTree, ns);   XDocument CSXML = new XDocument(srcTree); HttpContent content = new StringContent(CSXML.ToString()); content.Headers.ContentType = new System.Net.Http.Headers.MediaTypeHeaderValue("application/xml");   HttpResponseMessage responseMsg = await http.PostAsync(uri, content); if (responseMsg != null) { requestID = responseMsg.Headers.GetValues("x-ms-request-id").FirstOrDefault(); } return requestID; } 2.2 Create Deployment Request URI https://management.core.windows.net/<subscription-id>/services/hostedservices/<service-name>/deploymentslots/<deployment-slot-name> <deployment-slot-name> with staging or production, depending on where you wish to deploy your service package <service-name> provided as input from the previous step HTTP Method POST (HTTP 1.1) Header x-ms-version: 2012-03-01 Content-Type: application/xml Body More details about request body (and other information) are located here http://msdn.microsoft.com/en-us/library/windowsazure/ee460813.aspx C# code The following method show how to create hosted service deployment async public Task<String> NewAzureVMDeployment(String ServiceName, String VMName, String VNETName, XDocument VMXML, XDocument DNSXML) { String requestID = String.Empty;     String uri = String.Format("https://management.core.windows.net/{0}/services/hostedservices/{1}/deployments", _subscriptionid, ServiceName); HttpClient http = GetHttpClient(); XElement srcTree = new XElement("Deployment", new XAttribute(XNamespace.Xmlns + "i", ns1), new XElement("Name", ServiceName), new XElement("DeploymentSlot", "Production"), new XElement("Label", ServiceName), new XElement("RoleList", null) );   if (String.IsNullOrEmpty(VNETName) == false) { srcTree.Add(new XElement("VirtualNetworkName", VNETName)); }   if(DNSXML != null) { srcTree.Add(new XElement("DNS", new XElement("DNSServers", DNSXML))); }   XDocument deploymentXML = new XDocument(srcTree); ApplyNamespace(srcTree, ns);   deploymentXML.Descendants(ns + "RoleList").FirstOrDefault().Add(VMXML.Root);     String fixedXML = deploymentXML.ToString().Replace(" xmlns=\"\"", ""); HttpContent content = new StringContent(fixedXML); content.Headers.ContentType = new System.Net.Http.Headers.MediaTypeHeaderValue("application/xml");   HttpResponseMessage responseMsg = await http.PostAsync(uri, content); if (responseMsg != null) { requestID = responseMsg.Headers.GetValues("x-ms-request-id").FirstOrDefault(); }   return requestID; } 2.3 Create Virtual Machine Request URI https://management.core.windows.net/<subscription-id>/services/hostedservices/<cloudservice-name>/deployments/<deployment-name>/roles <cloudservice-name> and <deployment-name> are provided as input from the previous steps Http Method POST (HTTP 1.1) Header x-ms-version: 2012-03-01 Content-Type: application/xml Body More details about request body (and other information) located here http://msdn.microsoft.com/en-us/library/windowsazure/jj157186.aspx C# code async public Task<String> NewAzureVM(String ServiceName, String VMName, XDocument VMXML) { String requestID = String.Empty;   String deployment = await GetAzureDeploymentName(ServiceName);   String uri = String.Format("https://management.core.windows.net/{0}/services/hostedservices/{1}/deployments/{2}/roles", _subscriptionid, ServiceName, deployment);   HttpClient http = GetHttpClient(); HttpContent content = new StringContent(VMXML.ToString()); content.Headers.ContentType = new System.Net.Http.Headers.MediaTypeHeaderValue("application/xml"); HttpResponseMessage responseMsg = await http.PostAsync(uri, content); if (responseMsg != null) { requestID = responseMsg.Headers.GetValues("x-ms-request-id").FirstOrDefault(); } return requestID; } (3) List Virtual Machines To list virtual machine hosted on windows azure subscription we have to loop over all hosted services to get its hosted virtual machines To do that we need to execute the following operations: listing hosted services listing hosted service Virtual machine 3.1 Listing Hosted Services Request URI https://management.core.windows.net/<subscription-id>/services/hostedservices HTTP Method GET (HTTP 1.1) Headers x-ms-version: 2012-03-01 Body None. More info about this HTTP request located here on this link http://msdn.microsoft.com/en-us/library/windowsazure/ee460781.aspx C# Code async private Task<List<XDocument>> GetAzureServices(String subscriptionid) { String uri = String.Format("https://management.core.windows.net/{0}/services/hostedservices ", subscriptionid); List<XDocument> services = new List<XDocument>();   HttpClient http = GetHttpClient();   Stream responseStream = await http.GetStreamAsync(uri);   if (responseStream != null) { XDocument xml = XDocument.Load(responseStream); var svcs = xml.Root.Descendants(ns + "HostedService"); foreach (XElement r in svcs) { XDocument vm = new XDocument(r); services.Add(vm); } }   return services; }  3.2 Listing Hosted Service Virtual Machines Request URI https://management.core.windows.net/<subscription-id>/services/hostedservices/<service-name>/deployments/<deployment-name>/roles/<role-name> HTTP Method GET (HTTP 1.1) Headers x-ms-version: 2012-03-01 Body None. More info about this HTTP request here http://msdn.microsoft.com/en-us/library/windowsazure/jj157193.aspx C# Code async public Task<XDocument> GetAzureVM(String ServiceName, String VMName, String subscriptionid) { String deployment = await GetAzureDeploymentName(ServiceName); XDocument vmXML = new XDocument();   String uri = String.Format("https://management.core.windows.net/{0}/services/hostedservices/{1}/deployments/{2}/roles/{3}", subscriptionid, ServiceName, deployment, VMName);   HttpClient http = GetHttpClient(); Stream responseStream = await http.GetStreamAsync(uri); if (responseStream != null) { vmXML = XDocument.Load(responseStream); }   return vmXML; }  So the final method which can be used to list all virtual machines is: async public Task<XDocument> GetAzureVMs() { List<XDocument> services = await GetAzureServices(); XDocument vms = new XDocument(); vms.Add(new XElement("VirtualMachines")); ApplyNamespace(vms.Root, ns); foreach (var svc in services) { string ServiceName = svc.Root.Element(ns + "ServiceName").Value;   String uri = String.Format("https://management.core.windows.net/{0}/services/hostedservices/{1}/deploymentslots/{2}", _subscriptionid, ServiceName, "Production");   try { HttpClient http = GetHttpClient(); Stream responseStream = await http.GetStreamAsync(uri);   if (responseStream != null) { XDocument xml = XDocument.Load(responseStream); var roles = xml.Root.Descendants(ns + "RoleInstance"); foreach (XElement r in roles) { XElement svcnameel = new XElement("ServiceName", ServiceName); ApplyNamespace(svcnameel, ns); r.Add(svcnameel); // not part of the roleinstance vms.Root.Add(r); } } } catch (HttpRequestException http) { // no vms with cloud service } } return vms; }  (4) Restart Virtual Machine Request URI https://management.core.windows.net/<subscription-id>/services/hostedservices/<service-name>/deployments/<deployment-name>/roles/<role-name>/Operations HTTP Method POST (HTTP 1.1) Headers x-ms-version: 2012-03-01 Content-Type: application/xml Body <RestartRoleOperation xmlns:i="http://www.w3.org/2001/XMLSchema-instance"> <OperationType>RestartRoleOperation</OperationType> </RestartRoleOperation>  More details about this http request here http://msdn.microsoft.com/en-us/library/windowsazure/jj157197.aspx  C# Code async public Task<String> RebootVM(String ServiceName, String RoleName) { String requestID = String.Empty;   String deployment = await GetAzureDeploymentName(ServiceName); String uri = String.Format("https://management.core.windows.net/{0}/services/hostedservices/{1}/deployments/{2}/roleInstances/{3}/Operations", _subscriptionid, ServiceName, deployment, RoleName);   HttpClient http = GetHttpClient();   XElement srcTree = new XElement("RestartRoleOperation", new XAttribute(XNamespace.Xmlns + "i", ns1), new XElement("OperationType", "RestartRoleOperation") ); ApplyNamespace(srcTree, ns);   XDocument CSXML = new XDocument(srcTree); HttpContent content = new StringContent(CSXML.ToString()); content.Headers.ContentType = new System.Net.Http.Headers.MediaTypeHeaderValue("application/xml");   HttpResponseMessage responseMsg = await http.PostAsync(uri, content); if (responseMsg != null) { requestID = responseMsg.Headers.GetValues("x-ms-request-id").FirstOrDefault(); } return requestID; }  (5) Delete Virtual Machine You can delete your hosted virtual machine by deleting its deployment, but I prefer to delete its hosted service also, so you can easily manage your virtual machines from code 5.1 Delete Deployment Request URI https://management.core.windows.net/< subscription-id >/services/hostedservices/< service-name >/deployments/<Deployment-Name> HTTP Method DELETE (HTTP 1.1) Headers x-ms-version: 2012-03-01 Body None. C# code async public Task<HttpResponseMessage> DeleteDeployment( string deploymentName) { string xml = string.Empty; String uri = String.Format("https://management.core.windows.net/{0}/services/hostedservices/{1}/deployments/{2}", _subscriptionid, deploymentName, deploymentName); HttpClient http = GetHttpClient(); HttpResponseMessage responseMessage = await http.DeleteAsync(uri); return responseMessage; }  5.2 Delete Hosted Service Request URI https://management.core.windows.net/<subscription-id>/services/hostedservices/<service-name> HTTP Method DELETE (HTTP 1.1) Headers x-ms-version: 2012-03-01 Body None. C# code async public Task<HttpResponseMessage> DeleteService(string serviceName) { string xml = string.Empty; String uri = String.Format("https://management.core.windows.net/{0}/services/hostedservices/{1}", _subscriptionid, serviceName); Log.Info("Windows Azure URI (http DELETE verb): " + uri, typeof(VMManager)); HttpClient http = GetHttpClient(); HttpResponseMessage responseMessage = await http.DeleteAsync(uri); return responseMessage; }  And the following is the method which can used to delete both of deployment and service async public Task<string> DeleteVM(string vmName) { string responseString = string.Empty;   // as a convention here in this post, a unified name used for service, deployment and VM instance to make it easy to manage VMs HttpClient http = GetHttpClient(); HttpResponseMessage responseMessage = await DeleteDeployment(vmName);   if (responseMessage != null) {   string requestID = responseMessage.Headers.GetValues("x-ms-request-id").FirstOrDefault(); OperationResult result = await PollGetOperationStatus(requestID, 5, 120); if (result.Status == OperationStatus.Succeeded) { responseString = result.Message; HttpResponseMessage sResponseMessage = await DeleteService(vmName); if (sResponseMessage != null) { OperationResult sResult = await PollGetOperationStatus(requestID, 5, 120); responseString += sResult.Message; } } else { responseString = result.Message; } } return responseString; }  Note: This article is subject to be updated Hisham  References Advanced Windows Azure IaaS – Demo Code Windows Azure Service Management REST API Reference Introduction to the Azure Platform Representational state transfer Asynchronous Programming with Async and Await (C# and Visual Basic) HttpClient Class

  Read the article

• CodePlex Daily Summary for Tuesday, February 08, 2011

  CodePlex Daily Summary for Tuesday, February 08, 2011Popular ReleasesyoutubeFisher: youtubeFisher 3.0 [beta]: What's new: Supports YouTube's new layout Complete internal refactoringNearforums - ASP.NET MVC forum engine: Nearforums v5.0: Version 5.0 of the ASP.NET MVC Forum Engine, containing the following improvements: .NET 4.0 as target framework using ASP.NET MVC 3. All views migrated to Razor for cleaner markup. Alternate template (Layout file) for mobile devices 4 Bug Fixes since Version 4.1 Visit the project Roadmap for more details.fuv: 1.0 release, codename Chopper Joe: features: search/replace :o to open file :s to save file :q to quitASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager html generation optimized new features for the lookup (add additional search data ) live demo went aeroEnhSim: EnhSim 2.3.6 BETA: 2.3.6 BETAThis release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Changes since 2.3.0 ...TestApi - a library of Test APIs: TestApi v0.6: TestApi v0.6 comes with the following changes: TestApi code development has been moved to Codeplex: Moved TestApi soluton to VS 2010; Moved all source code to Codeplex. All development work is done there now. Fault Injection API: Integrated the unmanaged FaultInjectionEngine.dll COM component in the build; Cleaned up FaultInjectionEngine.dll to build at warning level 4; Implemented “FaultScope” which allows for in-process fault injection; Added automation scripts & sample program; ...AutoLoL: AutoLoL v1.5.5: AutoChat now allows up to 6 items. Items with nr. 7-0 will be removed! News page url's are now opened in the default browser Added a context menu to the system tray icon (thanks to Alex Banagos) AutoChat now allows configuring the Chat Keys and the Modifier Key The recent files list now supports compact and full mode Fix: Swapped mouse buttons are now properly detected Fix: Sometimes the Play button was pressed while still greyed out Champion: Karma Note: You can also run the u...mojoPortal: 2.3.6.2: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2362-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Rawr: Rawr 4.0.19 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...IronRuby: 1.1.2: IronRuby 1.1.2 is a servicing release that keeps on improving compatibility with Ruby 1.9.2 and includes IronRuby integration to Visual Studio 2010. We decided to drop 1.8.6 compatibility mode in all post-1.0 releases. We recommend using IronRuby 1.0 if you need 1.8.6 compatibility. In this release we fixed several major issues: - problems that blocked Gem installation in certain cases - regex syntax: the parser was replaced with a new one that is much more compatible with Ruby 1.9.2 - cras...Pyxis 2: Production Release: Pyxis 2.0.0.13 - Full Production Release This release of Pyxis 2 offers you a wide range of features: Launch Applications in their own threads & domains Render alpha-blended icons on the desktop Support for SD & USB drives Online App Store Dynamic & Static IP support Menus & Modals Over a dozen GUI controls File selection dialogs Folder selection dialog Application, Bootloader, and Firmware Updating Update Release Notes Much More!Microsoft All-In-One Code Framework: Sample Browser v2 (CTP Release): Sample Browser v2 (CTP Release) http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=205917MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (4): There was a small issue with the previous release that caused errors when installing the templates in VS10 Express. This release corrects the error. Only use this if you encountered issues when installing the previous release. No changes in the binaries.Finestra Virtual Desktops: 1.0: Finally the version 1.0 release! Sorry for the long delay since the last release, but I think that you'll find this release to be really smooth, really stable, and a really great enhancement to Windows. New features include: Windows 7 taskbar integration Major performance and usability improvements Redesigned look and feel New name: Finestra Better automatic updating Much faster full-screen switcher Fixes Windows 7 hotkey collisions by default Updated installerFacebook C# SDK: 5.0.2 (BETA): PLEASE TAKE A FEW MINUTES TO GIVE US SOME FEEDBACK: Facebook C# SDK Survey This is third BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. This release contains some breaking changes. Particularly with authentication. After spending time reviewing the trouble areas that people are having using th...ASP.NET MVC SiteMap provider: MvcSiteMapProvider 3.0.0 for MVC3: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. ChangelogTargeting ASP.NET MVC 3 and .NET 4.0 Additional UpdatePriority options for generating XML sitemaps Allow to specify target on SiteMapTitleAttribute One action with multiple routes and breadcrumbs Medium Trust optimizations Create SiteMapTitleAttribute for setting parent title IntelliSense for your sitemap with MvcSiteMapSchem...patterns & practices SharePoint Guidance: SharePoint Guidance 2010 Hands On Lab: SharePoint Guidance 2010 Hands On Lab consists of six labs: one for logging, one for service location, and four for application setting manager. Each lab takes about 20 minutes to walk through. Each lab consists of a PDF document. You can go through the steps in the doc to create solution and then build/deploy the solution and run the lab. For those of you who wants to save the time, we included the final solution so you can just build/deploy the solution and run the lab.Value Injecter - object(s) to -> object mapper: 2.3: it lets you define your own convention-based matching algorithms (ValueInjections) in order to match up (inject) source values to destination values. inject from multiple sources in one InjectFrom added ConventionInjectionMobile Device Detection and Redirection: 0.1.11.11: Improvements to Beta Release The following changes have been made in version 0.1.11.11: BlackBerry Version 6 devices (such as the 9800 Torch) are now correctly identified with a dedicated handler. Android powered devices are now correctly identified. Minor change to Provider.cs to improve performance and optimise data sent to 51Degrees.mobi if the option is enabled. GC.collect is no longer called at any point. All garbage collection now happens automatically IMPORTANT CHANGES This rele...TweetSharp: TweetSharp v2.0.0.0 - Preview 10: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 9 ChangesAdded support for trends Added support for Silverlight 4 Elevated WP7 fixes Third Party Library VersionsHammock v1.1.7: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comNew Projectsbisolu_sendus: bisolu smsBlack & Scholes: Black & Scholes OptionsCosLabs: CosLabs makes it easy to see the full capabilities of the Cosmos operating system toolkit. CosLabs has a number of experiments to find new and unique uses for Cosmos. It's developed in C#.DeployToAzure: DeployToAzure allows automating deployment of Windows Azure project and making it a part of TFS 2010 build process without using PowerShell and Azure Management CmdLets. Digital: Educational purposesDiscogsNet: DiscogsNet is a .NET library to query the Discogs.com API and parse the Discogs XML data dump files. It's developed in C# and usable from any .NET language. The API of the library is focused on ease of use and intuitiveness.DJME - The jQuery extensions for ASP.NET MVC: DJME - The jQuery extensions for ASP.NET MVC is a lightweight framework which helps you build rich user interfaces for ASP.NET MVC while enjoying great developer productivity. DokuDB: Visio AddIn to document different versions of a databaseDtsConfig Explorer: This project is a windows froms application that helps explore a SSIS dtsconfig file with an easy wayEveryDNS Service: Windows service to automatically send your current IP address to everydns.net for dynamic domains. Automatically monitors and sends IP address changes without having to be logged in. The project is built in C# targeting the .NET 4.0 framework.EvoSim - Evolution Simulation: EvoSim is a pet project to learn aspects of MVVM, WPF/Silverlight, and Parallel Processing features of .NET 4. The goal is to simulate a world filled with creatures that move, eat, reproduce, and die according to Darwinian evolutionary principles. It is tile and turn based.EZStorage: A storage library for XNA based on EasyStorage but abstracting in an XML based file list for each folder, allowing file listings on all folders and details like file creation dates which are no longer possible in XNA 4.0ForeverBell's Snake: A snake game written in VB.NET.Glauca Browser: This is a browser with a webkit core inside.Grauers SharePoint 2010 Custom MasterPage Feature: This is a SharePoint 2010 Custom MastePage feature. Custom Master and custom CSS Blog post about the project: http://www.grauers.net/archive/2011/02/07/build-a-sharepoint-2010-custom-mastepage-with-visual-studio-2010.aspxHamming Code Sample: HamCode demonstrate how the hamming code work, result of coded and decoded data. Shows the benefits of hamming method/codeHydroDesktop Mercurial Test: This is a trial version of the HydroDesktop project (hydrodesktop.codeplex.com) running on Mercurial source code repository. We first want to test whether the data update/download is happening fine before switching the official HydroDesktop website to the new system.LateBindingApi: Creates .Net Proxy Components from COM Type Libraries.Middlesex County College Library Wireless Auto Login: The Middlesex County College Library Wireless Auto Login automatically logs a computer in to the Middlesex County College (Edison, NJ) Library's WifiMobility: Mobility is a small program that reads from a text file. The text file includes everything about the program, right down to that cute little bunny on your desktop! Try Mobility today!OpenMFC: OpenMFC is opensource version of MFC for using with C/C++ compiler without MFC.Orchard Content Sharing: This Orchard module adds content sharing functionality via integration with AddThis.com sharing service.Orchard Wunder Weather Widget: This project is used to maintain the source code for the Wunder Weather widget in the Orchard gallery.Professional Audio Recorder: Professional Audio Recorder is a Audio Recorder for Windows Phone 7Python Node Info for Umbraco: Designed to assist Umbraco macro authors who are writing their macros in Python. Provides a helper macro that, when inserted into a page, will enable the display of an info panel showing the page node properties as represented in Python.Softina.Graphs: Softina.Graphs is a graph managment and algorithm utility. It includes a set of libraries to work with graph processing. It is written using .net framework with c# language and MS Visual Studio 2008. Client applications is created using devexpress components.spangesharp: Application to help people learn c#Visual Studio Private Extension Gallery: Add a new tab in the Visual Studio extension manager to manage private extensions.WCF Home Framework: Home Framework is a service-oriented framework able to facilitate deploy and management of wcf services in a mid-size scenario project.Windows Phone 7 Video Player: This project contains all the source of an application for Windows Phone 7 to consume an RSS Media exposed by our Smooth Streaming Video Player plugin for WordPress (http://smooth.codeplex.com).WOL Shopping List: This is a shoppingList version of WOL's NearMeWP7RSSReader: Updated RSSReader project for Windows Phone 7 using the RTM tools with the October 2010 update.Xen (XNA Extended) Framework: The Xen Framework is a set of libraries that provides and extends XNA 4.0 functionality to make game development easier and faster while producing clean, maintainable code. Xen frees you up to spend more time building your game.

  Read the article

• CodePlex Daily Summary for Saturday, January 01, 2011

  CodePlex Daily Summary for Saturday, January 01, 2011Popular ReleasesBloodSim: BloodSim - 1.3.0.0: - Added tally for number of boss swings and swing avoids - Removed a large number of options that were carried over from Beta and are no longer relevant - Changed stat entry to use Rating format for Dodge, Parry, Haste and Mastery - Rearranged Settings interface - BloodSim will now check for updates on startup and notify the user if a new version is available - Added option to Show/Hide the Simulation Log to increase speed during large simulationsEnhSim: EnhSim 2.2.8 ALPHA: 2.2.8 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Rebuilt Feral Spir...CBM-Command: Version 2.0 Beta 2 - 2010-12-31: This version fixes three major bugs in Version 2.0 Beta 1 Changes(64, 128, Plus/4) Changed the timing code back to version 1.7 because the clock() function in cc65 does not reflect accurate timing. (VIC, PET) The time(NULL) function is not available on these targets and thus had to be removed. Help Hot-Key Fixed - Now when you press either F1 or H you get the help file (if the CBM-Command disk is in the drive you started CBM-Command from). Updated Help File - the new help file by popmi...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.6 Released: Hi, Today we are releasing final version of Visifire, v3.6.6 with the following new feature: * TextDecorations property is implemented in Title for Chart. * TitleTextDecorations property is implemented in Axis. * MinPointHeight property is now applicable for Column and Bar Charts. Also this release includes few bug fixes: * ToolTipText property of DataSeries was not getting applied from Style. * Chart threw exception if IndicatorEnabled property was set to true and Too...StyleCop Compliant Visual Studio Code Snippets: Visual Studio Code Snippets - January 2011: StyleCop Compliant Visual Studio Code Snippets Visual Studio 2010 provides C# developers with 38 code snippets, enhancing developer productivty and increasing the consistency of the code. Within this project the original code snippets have been refactored to provide StyleCop compliant versions of the original code snippets while also adding many new code snippets. Within the January 2011 release you'll find 82 code snippets to make you more productive and the code you write more consistent!...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.2: Version: 2.0.0.2 (Milestone 2): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...eCompany: eCompany v0.2.0 Build 63: Version 0.2.0 Build 63: Added Splash screen & about box Added downloading of currencies when eCompany launched for the first time (must close any bug caused by no currency rate existing) Added corp creation when eCompany launched for the first time (for now, you didn't need to edit the company.xml file manually) You just need to decompress file "eCompany v0.2.0.63.zip" into your current eCompany install directory.SQL Monitor - tracking sql server activities: SQL Monitor 3.0 alpha 8: 1. added truncate table/defrag index/check db functions 2. improved alert 3. fixed problem with alert causing config file corrupted(hopefully)Temporary Data Storage Folder: TDS Folder version 0.2 Beta: In this release following bugs are fixed: 'Send to' entry bug fixed Preferences bug fixedSilverlight File Upload and Download with Interlink: HSS Interlink v.2.1.300: Latest Release 2.1.300 - December 29th 2010 Change Log DownloadFileDialog Modified to support an absolute uri for the DownloadUri property, which is required for OOB support UploadFileDialog Modified to support an absolute uri for the UploadUri property, which is required for OOB support For existing users be sure to uninstall the older version prior to installing this version Note: The demo application is NOT included with the installer but can be reviewed here Stable release and ready...RDPAddins .NET: RDPAddins Alpha 2 (0.2.0.0): Second alpha release... Breaking changes (now this project has 0.2 version): now addin should implement RDPAddins.Common.IAddin and should me exported with RDPAddins.Common.AddinMetadataAtrribute !!!most of all old Addin base class method you can fide in IChannel or IUI interfeces see FileTransferAddin Now RDPAddins.Common.dll just provide interfaces for addin, channel, ui, and export metadata Whole implementation is in RDPAddins.exe RDPAddins.Common.dll has some documentation :) why all this...DocX: DocX v1.0.0.11: Building Examples projectTo build the Examples project, download DocX.dll and add it as a reference to the project. OverviewThis version of DocX contains many bug fixes, it is a serious step towards a stable release. Added1) Unit testing project, 2) Examples project, 3) To many bug fixes to list here, see the source code change list history.Cosmos (C# Open Source Managed Operating System): 71406: This is the second release supporting the full line of Visual Studio 2010 editions. Changes since release 71246 include: Debug info is now stored in a single .cpdb file (which is a Firebird database) Keyboard input works now (using Console.ReadLine) Console colors work (using Console.ForegroundColor and .BackgroundColor)AutoLoL: AutoLoL v1.5.0: Added the all new Masteries Browser which replaces the Quick Open combobox AutoLoL will now attemt to create file associations for mastery (*.lolm) files Each Mastery Build can now contain keywords that the Masteries Browser will use for filtering Changed the way AutoLoL detects if another instance is already running Changed the format of the mastery files to allow more information stored in* Dialogs will now focus the Ok or Cancel button which allows the user to press Return to clo...Paint.NET PSD Plugin: 1.6.0: Handling of layer masks has been greatly improved. Improved reliability. Many PSD files that previously loaded in as garbage will now load in correctly. Parallelized loading. PSD files containing layer masks will load in a bit quicker thanks to the removal of the sequential bottleneck. Hidden layers are no longer made visible on save. Many thanks to the users who helped expose the layer masks problem: Rob Horowitz, M_Lyons10. Please keep sending in those bug reports and PSD repro files!Facebook C# SDK: 4.1.1: From 4.1.1 Release: Authentication bug fix caused by facebook change (error with redirects in Safari) Authenticator fix, always returning true From 4.1.0 Release Lots of bug fixes Removed Dynamic Runtime Language dependencies from non-dynamic platforms. Samples included in release for ASP.NET, MVC, Silverlight, Windows Phone 7, WPF, WinForms, and one Visual Basic Sample Changed internal serialization to use Json.net BREAKING CHANGE: Canvas Session is no longer supported. Use Signed...Catel - WPF and Silverlight MVVM library: 1.0.0: And there it is, the final release of Catel, and it is no longer a beta version!Euro for Windows XP: ChangeRegionalSettings 1..0: *Rocket Framework (.Net 4.0): Rocket Framework for Windows V 1.0.0: Architecture is reviewed and adjusted in a way so that I can introduce the Web version and WPF version of this framework next. - Rocket.Core is introduced - Controller button functions revisited and updated - DB is renewed to suite the implemented features - Create New button functionality is changed - Add Question Handling featuresFlickr Wallpaper Rotator (for Windows desktop): Wallpaper Flickr 1.1: Some minor bugfixes (mostly covering when network connection is flakey, so I discovered them all while at my parents' house for Christmas).New Projects7-Up: PowerShell Scripts for Upgrading SharePoint 2007 to 2010: PowerShell scripts to automate the upgrade of SharePoint 2007 to SharePoint 2010 using a content database or hybrid upgrade approach.Apple Wireless Keyboard: Helper that Allows people use the Apple Wireless (or Wired possibly) Keyboard under Windows 7 without loosing the mac functionalityckTest: testtesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttestCrude - .Net Dependency Management: Crude is light dependency management for .net, there was no dependency management solution for .net as Maven or Ivy until now. DeepTime: Event tacking, management and plotting site.Dev/Test Cloud Platform: Dev/Test Cloud Platform is implemented by Beyondsoft and Microsoft. The platform is dedicated to software development and test scenarios. With Dev/Test Cloud you can save your cost, improve work efficiency, and improve product quality.Image Viewer (wpf version): Image viewer helps windows users to review images on their computer. It is written i Csharp and wpf.LNOne: All common code, framework code, utility code in one.LOGL::GLib: LOGL::GLib is an OpenGL game library written in C++ that allows new C++/OpenGL programmers to focus more on the game and less on the details.MAPI.GUI: Graphical program uses function from mcopyapi.codeplex.com and mdeleteapi.codeplex.com console programs. Program support longPath (above 259 chars and less 32000 chars)Movie Collection Manager: Gerenciador que ajuda a manusear coleção de filmes. Possui uma interface super atraente e simples de usar. Ferramentas e tecnologias usadas: - Visual C# 2010 Express - SQL Server 2008 R2 Express - Windows Forms - Entity Framework OBS: Projeto concorrente do Desafio .NETMyStudioServer.com: Source code for the DotNetNuke http://MyStudioServer.com websiteNusya Tester: A software to create and use various tests with right answers explanations to help one in self-education. It's developed in C#Project Zylaphon: Project Zylaphon is a C# GPL Open Source Computer Aided Music Composition System. Its design goals include highly interactive composition, music computation, and analysis; system control to be provided by an A.I. goal based agenda and quasi Blackboard for maximum flexibility.Remember The Task: RememberTheTask makes it easier to remember what you have been doing the last hour. It's developed in Visual Basic.Rent Payments Scheduling: Register rent schedules and keep track of them.Simple MVVM Toolkit for Silverlight: Simple MVVM Toolkit makes it easier to develop Silverlight applications using the Model-View-ViewModel design pattern.Sparrow.NET HtmlTemplate: Its a template engine for generating web pages.(?????HTML?????，??????html Tag???????html????。)SQLDiagUI: SQLDiagUI provides a GUI for Microsoft SQlDiag Utility which allows users to create a configuration file and start/stop/schedule SQLDiag against a SQL Server.Test Control: testing frameworkTwicko: Simple twitter client.Unity3D Utilities: Unity3D Utilities provides additional functionality to Unity3D (3.0+) via extensions, utilities, mini-frameworks, etc.VBA Composite Controls Object Model: VBA Composite Controls encapsulate complex event-driven interactions between ActiveX controls and other objects in Microsoft Office. It's uses are limited only by the imagination, from binding controls together for updating, to creating unique user interfaces!World of Warcraft Backit up(wow backit up): a project that helps you backup and restore your settings in wow easilyYamma: Yet Another Money Management Application. Build in .NET 4, SQLCE, LINQ and the Entity Framework.

  Read the article

• Enterprise Process Maps: A Process Picture worth a Million Words

  - by raul.goycoolea

  p { margin-bottom: 0.08in; }h1 { margin-top: 0.33in; margin-bottom: 0in; color: rgb(54, 95, 145); page-break-inside: avoid; }h1.western { font-family: "Cambria",serif; font-size: 14pt; }h1.cjk { font-family: "DejaVu Sans"; font-size: 14pt; }h1.ctl { font-size: 14pt; } Getting Started with Business Transformations A well-known proverb states that "A picture is worth a thousand words." In relation to Business Process Management (BPM), a credible analyst might have a few questions. What if the picture was taken from some particular angle, like directly overhead? What if it was taken from only an inch away or a mile away? What if the photographer did not focus the camera correctly? Does the value of the picture depend on who is looking at it? Enterprise Process Maps are analogous in this sense of relative value. Every BPM project (holistic BPM kick-off, enterprise system implementation, Service-oriented Architecture, business process transformation, corporate performance management, etc.) should be begin with a clear understanding of the business environment, from the biggest picture representations down to the lowest level required or desired for the particular project type, scope and objectives. The Enterprise Process Map serves as an entry point for the process architecture and is defined: the single highest level of process mapping for an organization. It is constructed and evaluated during the Strategy Phase of the Business Process Management Lifecycle. (see Figure 1) Fig. 1: Business Process Management Lifecycle Many organizations view such maps as visual abstractions, constructed for the single purpose of process categorization. This, in turn, results in a lesser focus on the inherent intricacies of the Enterprise Process view, which are explored in the course of this paper. With the main focus of a large scale process documentation effort usually underlying an ERP or other system implementation, it is common for the work to be driven by the desire to "get to the details," and to the type of modeling that will derive near-term tangible results. For instance, a project in American Pharmaceutical Company X is driven by the Director of IT. With 120+ systems in place, and a lack of standardized processes across the United States, he and the VP of IT have decided to embark on a long-term ERP implementation. At the forethought of both are questions, such as: How does my application architecture map to the business? What are each application's functionalities, and where do the business processes utilize them? Where can we retire legacy systems? Well-developed BPM methodologies prescribe numerous model types to capture such information and allow for thorough analysis in these areas. Process to application maps, Event Driven Process Chains, etc. provide this level of detail and facilitate the completion of such project-specific questions. These models and such analysis are appropriately carried out at a relatively low level of process detail. (see figure 2) Fig. 2: The Level Concept, Generic Process HierarchySome of the questions remaining are ones of documentation longevity, the continuation of BPM practice in the organization, process governance and ownership, process transparency and clarity in business process objectives and strategy. The Level Concept in Brief Figure 2 shows a generic, four-level process hierarchy depicting the breakdown of a "Process Area" into progressively more detailed process classifications. The number of levels and the names of these levels are flexible, and can be fit to the standards of the organization's chosen terminology or any other chosen reference model that makes logical sense for both short and long term process description. It is at Level 1 (in this case the Process Area level), that the Enterprise Process Map is created. This map and its contained objects become the foundation for a top-down approach to subsequent mapping, object relationship development, and analysis of the organization's processes and its supporting infrastructure. Additionally, this picture serves as a communication device, at an executive level, describing the design of the business in its service to a customer. It seems, then, imperative that the process development effort, and this map, start off on the right foot. Figuring out just what that right foot is, however, is critical and trend-setting in an evolving organization. Key Considerations Enterprise Process Maps are usually not as living and breathing as other process maps. Just as it would be an extremely difficult task to change the foundation of the Sears Tower or a city plan for the entire city of Chicago, the Enterprise Process view of an organization usually remains unchanged once developed (unless, of course, an organization is at a stage where it is capable of true, high-level process innovation). Regardless, the Enterprise Process map is a key first step, and one that must be taken in a precise way. What makes this groundwork solid depends on not only the materials used to construct it (process areas), but also the layout plan and knowledge base of what will be built (the entire process architecture). It seems reasonable that care and consideration are required to create this critical high level map... but what are the important factors? Does the process modeler need to worry about how many process areas there are? About who is looking at it? Should he only use the color pink because it's his boss' favorite color? Interestingly, and perhaps surprisingly, these are all valid considerations that may just require a bit of structure. Below are Three Key Factors to consider when building an Enterprise Process Map: Company Strategic Focus Process Categorization: Customer is Core End-to-end versus Functional Processes Company Strategic Focus As mentioned above, the Enterprise Process Map is created during the Strategy Phase of the Business Process Management Lifecycle. From Oracle Business Process Management methodology for business transformation, it is apparent that business processes exist for the purpose of achieving the strategic objectives of an organization. In a prescribed, top-down approach to process development, it must be ensured that each process fulfills its objectives, and in an aggregated manner, drives fulfillment of the strategic objectives of the company, whether for particular business segments or in a broader sense. This is a crucial point, as the strategic messages of the company must therefore resound in its process maps, in particular one that spans the processes of the complete business: the Enterprise Process Map. One simple example from Company X is shown below (see figure 3). Fig. 3: Company X Enterprise Process Map In reviewing Company X's Enterprise Process Map, one can immediately begin to understand the general strategic mindset of the organization. It shows that Company X is focused on its customers, defining 10 of its process areas belonging to customer-focused categories. Additionally, the organization views these end-customer-oriented process areas as part of customer-fulfilling value chains, while support process areas do not provide as much contiguous value. However, by including both support and strategic process categorizations, it becomes apparent that all processes are considered vital to the success of the customer-oriented focus processes. Below is an example from Company Y (see figure 4). Fig. 4: Company Y Enterprise Process Map Company Y, although also a customer-oriented company, sends a differently focused message with its depiction of the Enterprise Process Map. Along the top of the map is the company's product tree, overarching the process areas, which when executed deliver the products themselves. This indicates one strategic objective of excellence in product quality. Additionally, the view represents a less linear value chain, with strong overlaps of the various process areas. Marketing and quality management are seen as a key support processes, as they span the process lifecycle. Often, companies may incorporate graphics, logos and symbols representing customers and suppliers, and other objects to truly send the strategic message to the business. Other times, Enterprise Process Maps may show high level of responsibility to organizational units, or the application types that support the process areas. It is possible that hundreds of formats and focuses can be applied to an Enterprise Process Map. What is of vital importance, however, is which formats and focuses are chosen to truly represent the direction of the company, and serve as a driver for focusing the business on the strategic objectives set forth in that right. Process Categorization: Customer is Core In the previous two examples, processes were grouped using differing categories and techniques. Company X showed one support and three customer process categorizations using encompassing chevron objects; Customer Y achieved a less distinct categorization using a gradual color scheme. Either way, and in general, modeling of the process areas becomes even more valuable and easily understood within the context of business categorization, be it strategic or otherwise. But how one categorizes their processes is typically more complex than simply choosing object shapes and colors. Previously, it was stated that the ideal is a prescribed top-down approach to developing processes, to make certain linkages all the way back up to corporate strategy. But what about external influences? What forces push and pull corporate strategy? Industry maturity, product lifecycle, market profitability, competition, etc. can all drive the critical success factors of a particular business segment, or the company as a whole, in addition to previous corporate strategy. This may seem to be turning into a discussion of theory, but that is far from the case. In fact, in years of recent study and evolution of the way businesses operate, cross-industry and across the globe, one invariable has surfaced with such strength to make it undeniable in the game plan of any strategy fit for survival. That constant is the customer. Many of a company's critical success factors, in any business segment, relate to the customer: customer retention, satisfaction, loyalty, etc. Businesses serve customers, and so do a business's processes, mapped or unmapped. The most effective way to categorize processes is in a manner that visualizes convergence to what is core for a company. It is the value chain, beginning with the customer in mind, and ending with the fulfillment of that customer, that becomes the core or the centerpiece of the Enterprise Process Map. (See figure 5) Fig. 5: Company Z Enterprise Process Map Company Z has what may be viewed as several different perspectives or "cuts" baked into their Enterprise Process Map. It has divided its processes into three main categories (top, middle, and bottom) of Management Processes, the Core Value Chain and Supporting Processes. The Core category begins with Corporate Marketing (which contains the activities of beginning to engage customers) and ends with Customer Service Management. Within the value chain, this company has divided into the focus areas of their two primary business lines, Foods and Beverages. Does this mean that areas, such as Strategy, Information Management or Project Management are not as important as those in the Core category? No! In some cases, though, depending on the organization's understanding of high-level BPM concepts, use of category names, such as "Core," "Management" or "Support," can be a touchy subject. What is important to understand, is that no matter the nomenclature chosen, the Core processes are those that drive directly to customer value, Support processes are those which make the Core processes possible to execute, and Management Processes are those which steer and influence the Core. Some common terms for these three basic categorizations are Core, Customer Fulfillment, Customer Relationship Management, Governing, Controlling, Enabling, Support, etc. End-to-end versus Functional Processes Every high and low level of process: function, task, activity, process/work step (whatever an organization calls it), should add value to the flow of business in an organization. Suppose that within the process "Deliver package," there is a documented task titled "Stop for ice cream." It doesn't take a process expert to deduce the room for improvement. Though stopping for ice cream may create gain for the one person performing it, it likely benefits neither the organization nor, more importantly, the customer. In most cases, "Stop for ice cream" wouldn't make it past the first pass of To-Be process development. What would make the cut, however, would be a flow of tasks that, each having their own value add, build up to greater and greater levels of process objective. In this case, those tasks would combine to achieve a status of "package delivered." Figure 3 shows a simple example: Just as the package can only be delivered (outcome of the process) without first being retrieved, loaded, and the travel destination reached (outcomes of the process steps), some higher level of process "Play Practical Joke" (e.g., main process or process area) cannot be completed until a package is delivered. It seems that isolated or functionally separated processes, such as "Deliver Package" (shown in Figure 6), are necessary, but are always part of a bigger value chain. Each of these individual processes must be analyzed within the context of that value chain in order to ensure successful end-to-end process performance. For example, this company's "Create Joke Package" process could be operating flawlessly and efficiently, but if a joke is never developed, it cannot be created, so the end-to-end process breaks. Fig. 6: End to End Process Construction That being recognized, it is clear that processes must be viewed as end-to-end, customer-to-customer, and in the context of company strategy. But as can also be seen from the previous example, these vital end-to-end processes cannot be built without the functionally oriented building blocks. Without one, the other cannot be had, or at least not in a complete and organized fashion. As it turns out, but not discussed in depth here, the process modeling effort, BPM organizational development, and comprehensive coverage cannot be fully realized without a semi-functional, process-oriented approach. Then, an Enterprise Process Map should be concerned with both views, the building blocks, and access points to the business-critical end-to-end processes, which they construct. Without the functional building blocks, all streams of work needed for any business transformation would be lost mess of process disorganization. End-to-end views are essential for utilization in optimization in context, understanding customer impacts, base-lining all project phases and aligning objectives. Including both views on an Enterprise Process Map allows management to understand the functional orientation of the company's processes, while still providing access to end-to-end processes, which are most valuable to them. (See figures 7 and 8). Fig. 7: Simplified Enterprise Process Map with end-to-end Access Point The above examples show two unique ways to achieve a successful Enterprise Process Map. The first example is a simple map that shows a high level set of process areas and a separate section with the end-to-end processes of concern for the organization. This particular map is filtered to show just one vital end-to-end process for a project-specific focus. Fig. 8: Detailed Enterprise Process Map showing connected Functional Processes The second example shows a more complex arrangement and categorization of functional processes (the names of each process area has been removed). The end-to-end perspective is achieved at this level through the connections (interfaces at lower levels) between these functional process areas. An important point to note is that the organization of these two views of the Enterprise Process Map is dependent, in large part, on the orientation of its audience, and the complexity of the landscape at the highest level. If both are not apparent, the Enterprise Process Map is missing an opportunity to serve as a holistic, high-level view. Conclusion In the world of BPM, and specifically regarding Enterprise Process Maps, a picture can be worth as many words as the thought and effort that is put into it. Enterprise Process Maps alone cannot change an organization, but they serve more purposes than initially meet the eye, and therefore must be designed in a way that enables a BPM mindset, business process understanding and business transformation efforts. Every Enterprise Process Map will and should be different when looking across organizations. Its design will be driven by company strategy, a level of customer focus, and functional versus end-to-end orientations. This high-level description of the considerations of the Enterprise Process Maps is not a prescriptive "how to" guide. However, a company attempting to create one may not have the practical BPM experience to truly explore its options or impacts to the coming work of business process transformation. The biggest takeaway is that process modeling, at all levels, is a science and an art, and art is open to interpretation. It is critical that the modeler of the highest level of process mapping be a cognoscente of the message he is delivering and the factors at hand. Without sufficient focus on the design of the Enterprise Process Map, an entire BPM effort may suffer. For additional information please check: Oracle Business Process Management.

  Read the article

• 12.04 upgrade broke grub? (not wubi related)

  - by kaare

  I just updated from 11.10 to 12.04, with no major problems (it took a while to get past a request to restart ssh, mysql and some other services, but I did no fiddling by myself, everything was done by the installer). However, after restarting, grub can't do anything. Picking the new linux installation (first entry), I just get error: no such partition error: no such partition error: no such partition and picking the recovery-version just gives 5 lines instead of 3. I have windows 7 installed on a different drive, and can run it by booting from that drive instead. Picking it from the grub menu gives the same error as above (can't remember how many lines, though). I'll be honest and say that I don't remember if win 7 could be booted from grub before the update, though. In short, nothing on the grub menu works. any solutions? The grub menu changed appearance - before it was on a purple background, small letters, now it's white-on-black, big letters, looking very basic. The original installation was from a usb-drive, and I hadn't heard about wubi until I started googling this problem, so I doubt there's any connection. I really hope there are some grub-savvy people out there :) EDIT: ok. so, I made a bootable usb, and am running from that right now. when I ran the bootinfoscript, it warned me that "gawk" could not be found, using "busybox awk" instead. This may lead to unreliable results. just so you know. The contents of RESULTS.txt are: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos3)/boot/grub on this drive. => Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdc. sda1: __________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /DELLBIO.BIN /DELLRMK.BIN /COMMAND.COM sda2: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe sda4: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: vfat Boot sector type: Windows 7: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files: /boot.ini /bootmgr /ntldr /NTDETECT.COM sdb1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdb2: __________________________________________ File system: swap Boot sector type: - Boot sector info: sdb3: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sdb3 and looks at sector 375893584 of the same hard drive for core.img. core.img is at this location and looks for (,msdos3)/boot/grub on this drive. Operating System: Ubuntu 12.04 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb4: __________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sdc1: __________________________________________ File system: ntfs Boot sector type: SYSLINUX 4.06 4.06-pre1 Boot sector info: Syslinux looks at sector 4649656 of /dev/sdc1 for its second stage. SYSLINUX is installed in the directory. The integrity check of the ADV area failed. No errors found in the Boot Parameter Block. Operating System: Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg /ldlinux.sys ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 240,974 240,912 de Dell Utility /dev/sda2 241,664 21,213,183 20,971,520 7 NTFS / exFAT / HPFS /dev/sda3 * 21,213,184 483,151,863 461,938,680 7 NTFS / exFAT / HPFS /dev/sda4 483,151,872 488,394,751 5,242,880 f W95 Extended (LBA) /dev/sda5 483,153,920 488,394,751 5,240,832 dd Dell Media Direct Drive: sdb _______________________________________ Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 63 345,886,749 345,886,687 7 NTFS / exFAT / HPFS /dev/sdb2 345,888,768 361,510,911 15,622,144 82 Linux swap / Solaris /dev/sdb3 * 361,510,912 390,807,786 29,296,875 83 Linux /dev/sdb4 390,809,600 488,394,751 97,585,152 83 Linux Drive: sdc _______________________________________ Disk /dev/sdc: 8015 MB, 8015282176 bytes 255 heads, 63 sectors/track, 974 cylinders, total 15654848 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdc1 * 2,048 15,652,863 15,650,816 7 NTFS / exFAT / HPFS "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07D8-0411 vfat DellUtility /dev/sda2 E2765BBC765B9061 ntfs RECOVERY /dev/sda3 98DC5E54DC5E2D2E ntfs OS /dev/sda5 7061-9DF5 vfat MEDIADIRECT /dev/sdb1 01CBBB4C3374C3B0 ntfs Data1 /dev/sdb2 1ca45f3f-f888-43d1-8137-02699597189a swap /dev/sdb3 6bc1b599-ad4b-403c-a155-a5bc81211f5e ext4 /dev/sdb4 58e2b257-8608-4b11-b20b-dc162bb80b62 ext4 /dev/sdc1 0C02B64402B63316 ntfs PENDRIVE ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sdb4 /media/58e2b257-8608-4b11-b20b-dc162bb80b62 ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sdc1 /cdrom fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096) ================================ sda5/boot.ini: ================================ [boot loader] timeout=0 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Embedded" /fastdetect /KERNEL=NTOSBOOT.EXE /maxmem=1024 =========================== sdb3/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux /boot/vmlinuz-3.2.0-24-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, with Linux 3.2.0-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e echo 'Loading Linux 3.2.0-24-generic ...' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-24-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.0.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux /boot/vmlinuz-3.0.0-19-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-19-generic } menuentry 'Ubuntu, with Linux 3.0.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e echo 'Loading Linux 3.0.0-19-generic ...' linux /boot/vmlinuz-3.0.0-19-generic root=UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.0.0-19-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd1,msdos3)' search --no-floppy --fs-uuid --set=root 6bc1b599-ad4b-403c-a155-a5bc81211f5e linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda3)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos3)' search --no-floppy --fs-uuid --set=root 98DC5E54DC5E2D2E chainloader +1 } menuentry "Microsoft Windows XP Embedded (on /dev/sda5)" --class windows --class os { insmod part_msdos insmod fat set root='(hd0,msdos5)' search --no-floppy --fs-uuid --set=root 7061-9DF5 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sdb3/etc/fstab: ================================ # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb3 during installation UUID=6bc1b599-ad4b-403c-a155-a5bc81211f5e / ext4 errors=remount-ro 0 1 # /home was on /dev/sdb4 during installation UUID=58e2b257-8608-4b11-b20b-dc162bb80b62 /home ext4 defaults,user_xattr 0 2 # swap was on /dev/sdb2 during installation UUID=1ca45f3f-f888-43d1-8137-02699597189a none swap sw 0 0 =================== sdb3: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/core.img 1 = boot/grub/grub.cfg 1 = boot/initrd.img-3.0.0-19-generic 2 = boot/initrd.img-3.2.0-24-generic 2 = boot/vmlinuz-3.0.0-19-generic 2 = boot/vmlinuz-3.2.0-24-generic 1 = vmlinuz 1 = vmlinuz.old 2 =========================== sdc1/boot/grub/grub.cfg: =========================== if loadfont /boot/grub/font.pf2 ; then set gfxmode=auto insmod efi_gop insmod efi_uga insmod gfxterm terminal_output gfxterm fi set menu_color_normal=white/black set menu_color_highlight=black/light-gray menuentry "Try Ubuntu without installing" { set gfxpayload=keep linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash -- initrd /casper/initrd.lz } menuentry "Install Ubuntu" { set gfxpayload=keep linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash -- initrd /casper/initrd.lz } menuentry "Check disc for defects" { set gfxpayload=keep linux /casper/vmlinuz boot=casper integrity-check quiet splash -- initrd /casper/initrd.lz } ========================= sdc1/syslinux/syslinux.cfg: ========================== # D-I config version 2.0 include menu.cfg default vesamenu.c32 prompt 0 timeout 50 # If you would like to use the new menu and be presented with the option to install or run from USB at startup, remove # from the following line. This line was commented out (by request of many) to allow the old menu to be presented and to enable booting straight into the Live Environment! # ui gfxboot bootlogo =================== sdc1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) ?? = ?? boot/grub/grub.cfg 0 ================= sdc1: Location of files loaded by Syslinux: ================== GiB - GB File Fragment(s) ?? = ?? ldlinux.sys 1 ?? = ?? syslinux/chain.c32 1 ?? = ?? syslinux/gfxboot.c32 1 ?? = ?? syslinux/syslinux.cfg 0 ?? = ?? syslinux/vesamenu.c32 1 ============== sdc1: Version of COM32(R) files used by Syslinux: =============== syslinux/chain.c32 : COM32R module (v4.xx) syslinux/gfxboot.c32 : COM32R module (v4.xx) syslinux/vesamenu.c32 : COM32R module (v4.xx) =============================== StdErr Messages: =============================== xz: (stdin): Compressed data is corrupt xz: (stdin): Compressed data is corrupt awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in ./bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected

  Read the article

• The Art of Productivity

  - by dwahlin

  Getting things done has always been a challenge regardless of gender, age, race, skill, or job position. No matter how hard some people try, they end up procrastinating tasks until the last minute. Some people simply focus better when they know they’re out of time and can’t procrastinate any longer. How many times have you put off working on a term paper in school until the very last minute? With only a few hours left your mental energy and focus seem to kick in to high gear especially as you realize that you either get the paper done now or risk failing. It’s amazing how a little pressure can turn into a motivator and allow our minds to focus on a given task. Some people seem to specialize in procrastinating just about everything they do while others tend to be the “doers” who get a lot done and ultimately rise up the ladder at work. What’s the difference between these types of people? Is it pure laziness or are other factors at play? I think that some people are certainly more motivated than others, but I also think a lot of it is based on the process that “doers” tend to follow - whether knowingly or unknowingly. While I’ve certainly fought battles with procrastination, I’ve always had a knack for being able to get a lot done in a relatively short amount of time. I think a lot of my “get it done” attitude goes back to the the strong work ethic my parents instilled in me at a young age. I remember my dad saying, “You need to learn to work hard!” when I was around 5 years old. I remember that moment specifically because I was on a tractor with him the first time I heard it while he was trying to move some large rocks into a pile. The tractor was big but so were the rocks and my dad had to balance the tractor perfectly so that it didn’t tip forward too far. It was challenging work and somewhat tedious but my dad finished the task and taught me a few important lessons along the way including persistence, the importance of having a skill, and getting the job done right without skimping along the way. In this post I’m going to list a few of the techniques and processes I follow that I hope may be beneficial to others. I blogged about the general concept back in 2009 but thought I’d share some updated information and lessons learned since then. Most of the ideas that follow came from learning and refining my daily work process over the years. However, since most of the ideas are common sense (at least in my opinion), I suspect they can be found in other productivity processes that are out there. Let’s start off with one of the most important yet simple tips: Start Each Day with a List. Start Each Day with a List What are you planning to get done today? Do you keep track of everything in your head or rely on your calendar? While most of us think that we’re pretty good at managing “to do” lists strictly in our head you might be surprised at how affective writing out lists can be. By writing out tasks you’re forced to focus on the most important tasks to accomplish that day, commit yourself to those tasks, and have an easy way to track what was supposed to get done and what actually got done. Start every morning by making a list of specific tasks that you want to accomplish throughout the day. I’ll even go so far as to fill in times when I’d like to work on tasks if I have a lot of meetings or other events tying up my calendar on a given day. I’m not a big fan of using paper since I type a lot faster than I write (plus I write like a 3rd grader according to my wife), so I use the Sticky Notes feature available in Windows. Here’s an example of yesterday’s sticky note: What do you add to your list? That’s the subject of the next tip. Focus on Small Tasks It’s no secret that focusing on small, manageable tasks is more effective than trying to focus on large and more vague tasks. When you make your list each morning only add tasks that you can accomplish within a given time period. For example, if I only have 30 minutes blocked out to work on an article I don’t list “Write Article”. If I do that I’ll end up wasting 30 minutes stressing about how I’m going to get the article done in 30 minutes and ultimately get nothing done. Instead, I’ll list something like “Write Introductory Paragraphs for Article”. The next day I may add, “Write first section of article” or something that’s small and manageable – something I’m confident that I can get done. You’ll find that once you’ve knocked out several smaller tasks it’s easy to continue completing others since you want to keep the momentum going. In addition to keeping my tasks focused and small, I also make a conscious effort to limit my list to 4 or 5 tasks initially. I’ve found that if I list more than 5 tasks I feel a bit overwhelmed which hurts my productivity. It’s easy to add additional tasks as you complete others and you get the added benefit of that confidence boost of knowing that you’re being productive and getting things done as you remove tasks and add others. Getting Started is the Hardest (Yet Easiest) Part I’ve always found that getting started is the hardest part and one of the biggest contributors to procrastination. Getting started working on tasks is a lot like getting a large rock pushed to the bottom of a hill. It’s difficult to get the rock rolling at first, but once you manage to get it rocking some it’s really easy to get it rolling on its way to the bottom. As an example, I’ve written 100s of articles for technical magazines over the years and have really struggled with the initial introductory paragraphs. Keep in mind that these are the paragraphs that don’t really add that much value (in my opinion anyway). They introduce the reader to the subject matter and nothing more. What a waste of time for me to sit there stressing about how to start the article. On more than one occasion I’ve spent more than an hour trying to come up with 2-3 paragraphs of text.  Talk about a productivity killer! Whether you’re struggling with a writing task, some code for a project, an email, or other tasks, jumping in without thinking too much is the best way to get started I’ve found. I’m not saying that you shouldn’t have an overall plan when jumping into a task, but on some occasions you’ll find that if you simply jump into the task and stop worrying about doing everything perfectly that things will flow more smoothly. For my introductory paragraph problem I give myself 5 minutes to write out some general concepts about what I know the article will cover and then spend another 10-15 minutes going back and refining that information. That way I actually have some ideas to work with rather than a blank sheet of paper. If I still find myself struggling I’ll write the rest of the article first and then circle back to the introductory paragraphs once I’m done. To sum this tip up: Jump into a task without thinking too hard about it. It’s better to to get the rock at the top of the hill rocking some than doing nothing at all. You can always go back and refine your work.   Learn a Productivity Technique and Stick to It There are a lot of different productivity programs and seminars out there being sold by companies. I’ve always laughed at how much money people spend on some of these motivational programs/seminars because I think that being productive isn’t that hard if you create a re-useable set of steps and processes to follow. That’s not to say that some of these programs/seminars aren’t worth the money of course because I know they’ve definitely benefited some people that have a hard time getting things done and staying focused. One of the best productivity techniques I’ve ever learned is called the “Pomodoro Technique” and it’s completely free. This technique is an extremely simple way to manage your time without having to remember a bunch of steps, color coding mechanisms, or other processes. The technique was originally developed by Francesco Cirillo in the 80s and can be implemented with a simple timer. In a nutshell here’s how the technique works: Pick a task to work on Set the timer to 25 minutes and work on the task Once the timer rings record your time Take a 5 minute break Repeat the process Here’s why the technique works well for me: It forces me to focus on a single task for 25 minutes. In the past I had no time goal in mind and just worked aimlessly on a task until I got interrupted or bored. 25 minutes is a small enough chunk of time for me to stay focused. Any distractions that may come up have to wait until after the timer goes off. If the distraction is really important then I stop the timer and record my time up to that point. When the timer is running I act as if I only have 25 minutes total for the task (like you’re down to the last 25 minutes before turning in your term paper….frantically working to get it done) which helps me stay focused and turns into a “beat the clock” type of game. It’s actually kind of fun if you treat it that way and really helps me focus on a the task at hand. I automatically know how much time I’m spending on a given task (more on this later) by using this technique. I know that I have 5 minutes after each pomodoro (the 25 minute sprint) to waste on anything I’d like including visiting a website, stepping away from the computer, etc. which also helps me stay focused when the 25 minute timer is counting down. I use this technique so much that I decided to build a program for Windows 8 called Pomodoro Focus (I plan to blog about how it was built in a later post). It’s a Windows Store application that allows people to track tasks, productive time spent on tasks, interruption time experienced while working on a given task, and the number of pomodoros completed. If a time estimate is given when the task is initially created, Pomodoro Focus will also show the task completion percentage. I like it because it allows me to track my tasks, time spent on tasks (very useful in the consulting world), and even how much time I wasted on tasks (pressing the pause button while working on a task starts the interruption timer). I recently added a new feature that charts productive and interruption time for tasks since I wanted to see how productive I was from week to week and month to month. A few screenshots from the Pomodoro Focus app are shown next, I had a lot of fun building it and use it myself to as I work on tasks.   There are certainly many other productivity techniques and processes out there (and a slew of books describing them), but the Pomodoro Technique has been the simplest and most effective technique I’ve ever come across for staying focused and getting things done.   Persistence is Key Getting things done is great but one of the biggest lessons I’ve learned in life is that persistence is key especially when you’re trying to get something done that at times seems insurmountable. Small tasks ultimately lead to larger tasks getting accomplished, however, it’s not all roses along the way as some of the smaller tasks may come with their own share of bumps and bruises that lead to discouragement about the end goal and whether or not it is worth achieving at all. I’ve been on several long-term projects over my career as a software developer (I have one personal project going right now that fits well here) and found that repeating, “Persistence is the key!” over and over to myself really helps. Not every project turns out to be successful, but if you don’t show persistence through the hard times you’ll never know if you succeeded or not. Likewise, if you don’t persistently stick to the process of creating a daily list, follow a productivity process, etc. then the odds of consistently staying productive aren’t good.   Track Your Time How much time do you actually spend working on various tasks? If you don’t currently track time spent answering emails, on phone calls, and working on various tasks then you might be surprised to find out that a task that you thought was going to take you 30 minutes ultimately ended up taking 2 hours. If you don’t track the time you spend working on tasks how can you expect to learn from your mistakes, optimize your time better, and become more productive? That’s another reason why I like the Pomodoro Technique – it makes it easy to stay focused on tasks while also tracking how much time I’m working on a given task.   Eliminate Distractions I blogged about this final tip several years ago but wanted to bring it up again. If you want to be productive (and ultimately successful at whatever you’re doing) then you can’t waste a lot of time playing games or on Twitter, Facebook, or other time sucking websites. If you see an article you’re interested in that has no relation at all to the tasks you’re trying to accomplish then bookmark it and read it when you have some spare time (such as during a pomodoro break). Fighting the temptation to check your friends’ status updates on Facebook? Resist the urge and realize how much those types of activities are hurting your productivity and taking away from your focus. I’ll admit that eliminating distractions is still tough for me personally and something I have to constantly battle. But, I’ve made a conscious decision to cut back on my visits and updates to Facebook, Twitter, Google+ and other sites. Sure, my Klout score has suffered as a result lately, but does anyone actually care about those types of scores aside from your online “friends” (few of whom you’ve actually met in person)? :-) Ultimately it comes down to self-discipline and how badly you want to be productive and successful in your career, life goals, hobbies, or whatever you’re working on. Rather than having your homepage take you to a time wasting news site, game site, social site, picture site, or others, how about adding something like the following as your homepage? Every time your browser opens you’ll see a personal message which helps keep you on the right track. You can download my ubber-sophisticated homepage here if interested. Summary Is there a single set of steps that if followed can ultimately lead to productivity? I don’t think so since one size has never fit all. Every person is different, works in their own unique way, and has their own set of motivators, distractions, and more. While I certainly don’t consider myself to be an expert on the subject of productivity, I do think that if you learn what steps work best for you and gradually refine them over time that you can come up with a personal productivity process that can serve you well. Productivity is definitely an “art” that anyone can learn with a little practice and persistence. You’ve seen some of the steps that I personally like to follow and I hope you find some of them useful in boosting your productivity. If you have others you use please leave a comment. I’m always looking for ways to improve.

  Read the article

• CodePlex Daily Summary for Tuesday, April 20, 2010

  CodePlex Daily Summary for Tuesday, April 20, 2010New ProjectsASP.NET MVC Extensibility: ASP.NET MVC Extensibility.ASP.NET MVC Starter: Tekpub's ASP.NET MVC 2.0 Starter Site, as put together by Rob Conery in Episode 15 of Mastering ASP.NET MVC (http://tekpub.com/production/starter)AzureDemo: An internal Azure demo and test bed for some projects. After demo is complete this project will be closed.Basic Sprite Sheet Creator: A basic c# program to create sprite sheets. CodeDefender: Protect your .Net codes easily with this smart obfuscator!Crawlr: Tema 2 projectDocument Session Manager - Visual Studio addin: Document Session Manager is a Visual Studio 2008 addin for saving and restoring the list of opened documents (xml files, source files, winforms, et...Esferatec.Text.RegularExpressions: assembly to build regular expression patternsFIFA World Cup 2010 Mobile Sticker Checklist: FIFA World Cup 2010 Mobile Sticker Checklist is a small application for Windows Mobile developed in CF 3.5 to keep tracking of your sticker album. ...Finia.net: 追忆 游乐网·幻之大地FusspawnsAI: Fusspawns UT AI is a small test engine for a classic ut remote bot api. intending to improve ut's ai to a god like level without cheating bots(bots...G.A.E.T.: This is a Graphical Asymmetric Encryption Tool based on R.S.A. algorithm with the help of Java Language.Even though, this may be a small applicatio...ItzyBitzySpider: Webcrawler project from computer science at UCN.JingQiao.Ads: My DDD NTier Architecture example project.Managed Meizu SDK Demo: In this project we are sharing the source code to demonstrate the usage of managed SDK for Meizu cell phones, currently for M8. With the help of th...MaxxUtils.MaxxTagger: MaxxTagger: An Mp3 Tag Editor.. Add /Edit/Remove MP3 ID3 V1 and 2.3 Tags like Title, Artist, Album, Album Art, Genre. Besides tag editing, it also ...Maya Project Management: The Maya Project Management is a clone of RedMine with all its functions and plug-in support, using the following technologies: Microsoft .net Fra...MessageBoxLib: A simple, robust library for Xbox 360 and Windows development using the XNA Game Studio that makes using the Guide class's message box functionalit...MyWSAT - ASP.NET Membership Administration Tool: MyWSAT aka ASP.NET WSAT is a WebForms based website Starter Kit for the ASP.NET Membership Provider. It is a feature rich application that takes ca...OntologyCreator: this is my thesis and it is not finished yetPOS for .Net Handheld Products Service Object: POS for .Net Service Object Handheld Products Bar Code ScannerPostBinder: PostBinder is a small helper library that deserializes ASP.NET requests into C# classes. This eliminates having to write repeated hand wiring co...PostSharp for ASP.NET Web Sites: Adds support for PostSharp 2.0 on ASP.NET Web Sites.Rapid Dictionary: * Rapid Dictionary is a Translation Dictionary initialized by language learning network http://wordsteps.com. * Dictionary developed in C# and Co...ROrganizer: If you feel your movie files are kept in messy way, try out the ROrganizer which helps you rearrange them.RoRoWoBlog: 萝萝窝个人博客开源项目SPGroupDeflector - Explicitly deny groups to webs within your Site Collection: Secure webs within your MOSS or WSS Portal by explicitly denying access to specific users in SharePoint groups.SSIS ShapeFileSource: SSIS ShapeFileSource imports ESRI Shapefiles, and the associated attribute file (.dbf). The component based on the free Shapefile C Library.StoreManagement: University assignment. The task is to build an application that can perform basic CRUD operations on a property and use an arbitrary database. ...Surfium: TODO ;-)TaskCleaner: This is a Windows Forms project created to kill some running process in order to enhace the performance of Windows execution. Sometimes it is desi...The Expert Calendar: The Expert Calendar is a MOSS 2007 webpart which allows to connect to a Event Item List and display event items in a small design customizable cale...Visual Studio Find Results Window Tweak: This is a Visual Studio 2010 add-in which enables you to adjust the format of the Find Results Window. It is written in C#, .NET 4.0 and requires ...Weightlifting Sinclair coeficient calculator: Weightlifting Sinclair coeficient calculator for competitors (for Windows Mobile platform)Windows Azure Web Storage Explorer: Windows Azure Web Storage Explorer makes it easier for developers to browse and manage Blobs, Queues and Tables from Windows Azure Storage account....New Releases#SNMP - C# Based Open Source SNMP for .NET and Mono: CatPaw (5.0) Beta 1: SNMP v3 support in snmpd is complete.ASP.Net MVC Crud with JqGrid: Mvc Crud with JqGrid 0.3.0: Fairly major reworking of the GenericDataGrid (with alot of work from James). Most noticeable is the replacing of Edit and Delete with action butt...Basic Sprite Sheet Creator: Sprite Tool v1.1: Fixed the progress bar, it now correctly displays text and progress. Also download will now come with an installer and an executable so you don't h...Basic Sprite Sheet Creator: Sprite Tool Version 1.0: Program used to make basic sprite sheets. please visit http://coderplex.blogspot.com for more infoBraintree Client Library: Braintree-1.2.1: Escape all XMLCodeDefender: CodeDefender v0.1: Protect your .Net exe and dll files with this smart tool.ColinTesting: test: testColinTesting: test2: test2ColinTesting: test3: test3ColinTesting: test4: test4ColinTesting: test6: test6CycleMania Starter Kit EAP - ASP.NET 4 Problem - Design - Solution: Cyclemania 0.08.63: See Source Code tab for recent change history.Document Session Manager - Visual Studio addin: Release v0.45948: Release v0.45948DotNetNuke® Community Edition: 05.04.00: Major Highlights Fixed issue where portal settings were not saved per portal. Fixed issue with importing page templates. Fixed issue with...DotNetNuke® Postgres Data Provider: DNN PG Provider 01.00.00 Beta2: Fixes problems with deprecated datatype money in Postgres. Upgrades DotnetNuke code base to 04.09.05 It comes with a patch for the DotNetNuke insta...FIFA World Cup 2010 Mobile Sticker Checklist: FIFA World Cup 2010 Mobile Sticker Checklist v0.1b: FIFA World Cup 2010 Mobile Sticker Checklist v0.1b First beta release. Requires Microsoft Compact Framework 3.5. It was tested on an HTC Touch Viva...FIFA World Cup 2010 Mobile Sticker Checklist: FIFA World Cup 2010 Mobile Sticker Checklist v0.2b: FIFA World Cup 2010 Mobile Sticker Checklist v0.2b Second beta release. Requires Microsoft Compact Framework 3.5. It was tested on an HTC Touch Viv...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite 1.2: Fluent Ribbon Control Suite 1.2(supports .NET 3.5 and .NET 4 RTM) Includes: Fluent.dll (with .pdb and .xml) Showcase Application Samples Found...G.A.E.T.: Graphical Asymmetric Encryption Tool: User Interface The GAET User Interface is a window with five buttons. Each button is explained the following sections. Each button has a functional...HTML Ruby: 6.21.7: As long as I don't find anything else that I can improve, this will be submitted to Mozilla for review tomorrow. Added back process inserted conten...IBCSharp: IBCSharp 1.03: What IBCSharp 1.03.zip unzips to: http://i43.tinypic.com/24ffbqr.png Note: The above solution has MSTest, Typemock Isolator, and Microsoft CHESS c...LogikBug's IoC Container: Second Release: This project is dependent upon Microsoft.Practices.ServiceLocation and must be referenced when referencing LogikBug.Injection. Click here to view d...Managed Meizu SDK Demo: Library and Demo: Library and DemoMaxxUtils.MaxxTagger: MaxxUtils.MaxxTagger: Version: 1.0.0 (Beta) Instructions: Unzip the files to a folder and then dbl click on the exe. Known Issues: 1. When u copy or move a folde...OrthoLab: Cellule: Compile with Autodesk Maya 2008 32bit and 2010 64bit.OWASP Code Crawler: OWASP Code Crawler 2.7: Code Crawler 2.7 DescriptionIn terms of functionality there is not much new stuff in this release. We transplanted the new engine. Code Crawler is ...PerceptiveMCAPI - A .NET wrapper for the MailChimp Api: V1.2.3 PerceptiveMCAPI .Net Wrapper [Beta 2]: PerceptiveMCAPI – v 1.2.3 Change logFunctionality through MailChimp API announce v1.2.5 on 15-Feb-2010 .NET Wrapper New wrapper directives; api_Me...POS for .Net Handheld Products Service Object: POS for .Net Handhelp Products Service Object: The Service Object contained herein is a work in progress. This Service Object's is written as VS 2008 C# Project. The Target Platform is x86. ...PostSharp for ASP.NET Web Sites: R1: First release.Rich Ajax empowered Web/Cloud Applications: 6.4 beta 2c: A revisiov to the first fully featured version of Visual webGui offering web/cloud development tool that puts all ASP.NET Ajax limits behind with e...Should: Beta - 1.0: This is the initial release of the Should assertions extensions.Shrinkr: v1.0: First public release.Site Directory for SharePoint 2010 (from Microsoft Consulting Services, UK): v1.2: Address a bug found in v1.1 relating to the Delete Site Listings job not incrementing the 'Site Missing Count' for some SharePoint sites.Software Localization Tool: SharpSLT 1.0: New functions Backup before saving Delete entries Undo deletion Added more comments in the codeSPGroupDeflector - Explicitly deny groups to webs within your Site Collection: SPGroupDeflector: Download the source code, the wsp solution package, and Setup.docSSIS ShapeFileSource: Version 0.1: Short Preview of SSIS ShapeFileSource ComponentStarter Kit Mytrip.Mvc.Entity: Mytrip.Mvc.Entity 1.0: Warning Install MySql Connector/Net 6.3 MySQL Membership MSSQL Membership XML Membership UserManager FileManager Localization Captcha ...Surfium: Linux Expo Prebuild: First public releaseTaskCleaner: Initial Working Version: In this version we have all the features listed in the project description working fine. Built under Framework 3.5.Text to HTML: 0.4.5.0: CambiosSustitución de los siguientes caracteres: Anteriores: " < > ¡ © º ¿ Á Ä É Í Ñ Ó Ö Ú Ü ß á ä é í ñ ó ö ú ü € Nuevos: & ´ ≈ ¦ • ¸ ˆ ↓ ð … ∫ ...TS3QueryLib.Net: TS3QueryLib.Net Version 0.21.16.0: This release contains a bugfix for a bug that caused connection problems when connecting using an IP for some cases. So it's strongly recommended t...Tweety - Twitter Client: Tweety - 0.96: Form activation from system tray improved. General fixes. General code refactor.Web/Cloud Applications Development Framework | Visual WebGui: 6.4 Beta 2c: A revision to the first fully featured version of Visual webGui offering unique developer/designer interface and enhanced extensibility and customi...Windows Azure - PHP contributions: PhpAzureExtensions (Azure Drives) - 0.2.0: Extension for use with Windows Azure SDK 1.1! Breaking changes! Documentation can be found at http://phpazurecontrib.codeplex.com/wikipage?title=A...WoW Character Viewer: Viewer (40545): New setup build for 40545.Xrns2XMod: Xrns2XMod 0.0.5.3: Major Source code optimization: >> Separated logical code of xm/mod conversion from renoiseSong xml. Now all necessary renoise song data code is st...XsltDb - DotNetNuke XSLT module: 01.00.99: callable tag is introduced - create javascript ajax functions more easy import/export bug is fixed mdo:ajax checkbox processing is now the same...Most Popular ProjectsRawrWBFS ManagerSilverlight ToolkitAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseWindows Presentation Foundation (WPF)ASP.NETpatterns & practices – Enterprise LibraryPHPExcelMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrpatterns & practices – Enterprise LibraryIndustrial DashboardIonics Isapi Rewrite FilterFarseer Physics EngineBlogEngine.NETPHPExcelCaliburn: An Application Framework for WPF and SilverlightNB_Store - Free DotNetNuke Ecommerce Catalog ModuleTweetSharp

  Read the article

• CodePlex Daily Summary for Thursday, February 24, 2011

  CodePlex Daily Summary for Thursday, February 24, 2011Popular ReleasesInstant Feature Builder for Visual Studio 2010: Instant Feature Builder 1.2: This is the binary version of the Instant Feature Builder. Once downloaded, double click to install into Visual Studio. Version 1.2 fixes: Rename FX to IFB to shorten path lengths Fix issue in ExecuteCommand Fix issue to workaround problem with VS Template writer The Instant Feature Builder is a tool which enables you, via drag-and-drop, to build a specific type of Visual Studio extension (VSIX) known as a Feature Extension. A Feature Extension packages project and/or item templates,...DirectQ: Release 1.8.7 (Beta): Beta release of 1.8.7 to get feedback on what works well, what doesn't work well, and what doesn't work at all. D3D9 hardware with ps2.0 a must. Faster, more streamlined and more integrated rendering capabilities with additional MP features and support.Smartkernel: Smartkernel: ????，??????Chiave File Encryption: Chiave 0.9.1: Application for file encryption and decryption using 512 Bit rijndael encyrption algorithm with simple to use UI. Its written in C# and compiled in .Net version 3.5. It incorporates features of Windows 7 like Jumplists, Taskbar progress and Aero Glass. Change Log from 0.9 Beta to 0.9.1: ======================= >Added option for system shutdown, sleep, hibernate after operation completed. >Minor Changes to the UI. >Numerous Bug fixes. Feedbacks are Welcome!....DotNetNuke® Store: 03.00.00: What's New in this release? IMPORTANT: this version requires DotNetNuke 04.06.02 or higher! DO NOT REPORT BUGS HERE IN THE ISSUE TRACKER, INSTEAD USE THE DotNetNuke Store Forum! This version is the same code base as the version 02.01.51 RC, just some cleaning and source code release before submition to the release tracker for "official" release.ClosedXML - The easy way to OpenXML: ClosedXML 0.45.2: New on this release: 1) Added data validation. See Data Validation 2) Deleting or clearing cells deletes the hyperlinks too. New on v0.45.1 1) Fixed issues 6237, 6240 New on v0.45.2 1) Fixed issues 6257, 6266 New Examples Data ValidationOMEGA CMS: OMEGA CMA - Alpha 0.2: A few fixes for OMEGA Framework (DLL) A few tweeks for OMEGA CMSCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1.2: New control, Toast Prompt! Removed progress bar since Silverlight Toolkit Feb 2010 has it.Umbraco CMS: Umbraco 4.7: Service release fixing 31 issues. A full changelog will be available with the final stable release of 4.7 Important when upgradingUpgrade as if it was a patch release (update /bin, /umbraco and /umbraco_client). For general upgrade information follow the guide found at http://our.umbraco.org/wiki/install-and-setup/upgrading-an-umbraco-installation 4.7 requires the .NET 4.0 framework Web.Config changes Update the web web.config to include the 4 changes found in (they're clearly marked in...HubbleDotNet - Open source full-text search engine: V1.1.0.0: Add Sqlite3 DBAdapter Add App Report when Query Cache is Collecting. Improve the performance of index through Synchronize. Add top 0 feature so that we can only get count of the result. Improve the score calculating algorithm of match. Let the score of the record that match all items large then others. Add MySql DBAdapter Improve performance for multi-fields sort . Using hash table to access the Payload data. The version before used bin search. Using heap sort instead of qui...Xen: Graphics API for XNA: Xen 2.0: This is the final release of Xen; Xen 2.0. Xen 2.0 supports PC and Xbox 360 running XNA 4. The documentation download is coming soon Due to restrictions in XNA 4, Building Xen requires a DirectX 10 capable video card (Xen applications can still run on Windows Xp and DirectX 9 video cards)Silverlight????[???]: silverlight????[???]2.0: ???????，?????，????????silverlight??????。DBSourceTools: DBSourceTools_1.3.0.0: Release 1.3.0.0 Changed editors from FireEdit to ICSharpCode.TextEditor. Complete re-vamp of Intellisense ( further testing needed). Hightlight Field and Table Names in sql scripts. Added field dropdown on all tables and views in DBExplorer. Added data option for viewing data in Tables. Fixed comment / uncomment bug as reported by tareq. Included Synonyms in scripting engine ( nickt_ch ).IronPython: 2.7 Release Candidate 1: We are pleased to announce the first Release Candidate for IronPython 2.7. This release contains over two dozen bugs fixed in preparation for 2.7 Final. See the release notes for 60193 for details and what has already been fixed in the earlier 2.7 prereleases. - IronPython TeamCaliburn Micro: A Micro-Framework for WPF, Silverlight and WP7: Caliburn.Micro 1.0 RC: This is the official Release Candicate for Caliburn.Micro 1.0. The download contains the binaries, samples and VS templates. VS Templates The templates included are designed for situations where the Caliburn.Micro source needs to be embedded within a single project solution. This was targeted at government and other organizations that expressed specific requirements around using an open source project like this. NuGet This release does not have a corresponding NuGet package. The NuGet pack...Caliburn: A Client Framework for WPF and Silverlight: Caliburn 2.0 RC: This is the official Release Candidate for Caliburn 2.0. It contains all binaries, samples and generated code docs.Rawr: Rawr 4.0.20 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...MiniTwitter: 1.66: MiniTwitter 1.66 ???? ?? ?????????? 2 ??????????????????? User Streams ?????????Windows Phone 7 Isolated Storage Explorer: WP7 Isolated Storage Explorer v1.0 Beta: Current release features:WPF desktop explorer client Visual Studio integrated tool window explorer client (Visual Studio 2010 Professional and above) Supported operations: Refresh (isolated storage information), Add Folder, Add Existing Item, Download File, Delete Folder, Delete File Explorer supports operations running on multiple remote applications at the same time Explorer detects application disconnect (1-2 second delay) Explorer confirms operation completed status Explorer d...Silverlight Toolkit: Silverlight for Windows Phone Toolkit - Feb 2011: Silverlight for Windows Phone Toolkit OverviewSilverlight for Windows Phone Toolkit offers developers additional controls for Windows Phone application development, designed to match the rich user experience of the Windows Phone 7. Suggestions? Features? Questions? Ask questions in the Create.msdn.com forum. Add bugs or feature requests to the Issue Tracker. Help us shape the Silverlight Toolkit with your feedback! Please clearly indicate that the work items and issues are for the phone t...New ProjectsCompetition Management Platform: Paragliding Competition Management PlatformCS424 B2 Group - Car Management: CS424 B2 Group - Car ManagementEMS: The main aim of the system to perform environment inventorization.EVVA: EVVA ist ein Softwareprojekt zur Unterstützung privater Arbeitsvermittler FileSocialVB: A library to work with the filesocial.com web site and API through VB.NET. This is actually an offshoot of the http://twittervb.codeplex.com project. Though smaller, this will lead to a more compact library.Hash Crack - IGProgram: Hash Crack is a software program for hashes and passwords cracking. Hash Crack use dictionary or set of symbols for hashes cracking, and also support pwdump file format for Windows passwords cracking NTHash MD4. MD2, MD4, MD5, SHA1, SHA256, SHA384, SHA512Imail Spammer Killer: Bots seem to love picking off the weak passwords of IpSwitch IMail v10 users and using SMTP auth to spam the world with their new found account access. This project is a windows service to isolate and stop this activity by disabling the violated user account as it occurs.JVS2USB: Montage permettant de relier une IO ( capcom / Sega ) sur un PC via l'USB !!Library Reminder: Library ReminderMAVI: mobile application for the visually impaired: bill recognition & tag and recognize objects based on a specific stickerMessage splliting without envelope in Biztalk 2009: Message splitting without envelope in Biztalk 2009. The project contains: - Source Code - Examples Article describing how to make it:Microsoft translator: Language translator designed to test Microsoft Translator web service API In Windows Phone 7 developed using Visual Studio 2010 in C#mrmuffin: Mr Muffin WP7 game for childrenNetwork Monitor: Simple application with a vu-meter style display of recent incoming network traffic. - Requires .NET 4, - Requires WinPCap (http://www.winpcap.org/) - Only tested to run under Windows 7NPhysics: NPhysics - Physical Data Types for .NETOpen SimRacing Results: Open SimRacing Results aims to provide an open standard for race results of PC SimRacing games (like iRacing, rFactor, NR2003, ...), allowing developers of league management systems to use a unique interface to get the results from, regardless of the simulation used.Orchard Image Gallery: Orchard Image Gallery project is intented to provide a Image Gallery content part and/or widget for the Orchard Project.Planning Poker for Windows Phone 7: Play planning poker on your Windows Phone 7.Publishing and consuming WCF in Biztalk 2009 and Visual Studio 2008: The file contains: Biztalk 2009 Project, C# Console Project, Example. Push Notification for Windows Phone 7 in php: WindowsPhonePushNotification enables you to use Microsoft Push Notification Service in phpQuksace Agjke: For more information, please visit <http://students.cs.tamu.edu/abe/IS_and_R/HW3/quksace%20agjke.html>. http://students.cs.tamu.edu/abe/IS_and_R/HW3/quksace%20agjke.html Read: a "GNU Make"-like utility for viewing Readme files: Read is a simple program to easily load and read README files on a UNIX-compliant system. It works in a similar way to GNU Make by searching a directory for a compatible file, in this case a Readme file, and loading it for reading using a text editor or viewer.SQL CE 3.5 persistence mapper for ECO IV: May need some adjustments for ECO V/VI, definitely needs some rewrite to support SQL CE 4.0 fullySQL Server Job Failure Notification System: A simple means of ensuring you know when SQLAgent jobs fail.SuperQuery: SuperQuery makes it easy to run the same batch of SQL across several databases on different SQL servers. SuperQuery supports all editions and versions of SQL Server from 2000 onwards. It is developed in C# using .NET 4 Client Profile.System.Net.Mail Extended: An Extension to the System.Net.Mail Namespace, adding a POP3 Client, Enhanced SMTP Client, IMAP Client, POP3 Server, SMTP Server, and IMAP Serve, all written in Visual C#.wow-combatlogs: A PowerShell module for working with combat logs generated by World of Warcraft.WPF UndoManager: WPF UndoManager provides a simple Undomanager on the base of WPF's CommandPattern. It use an implementation of the ICommand-interface to manage a history of actions.XO / TicTacToe game: Dynamic sized XO / TicTacToe game for Windows Phone 7 Build using Visual Studio 2010 and C#

  Read the article

• CLSF & CLK 2013 Trip Report by Jeff Liu

  - by jamesmorris

  This is a contributed post from Jeff Liu, lead XFS developer for the Oracle mainline Linux kernel team. Recently, I attended both the China Linux Storage and Filesystem workshop (CLSF), and the China Linux Kernel conference (CLK), which were held in Shanghai. Here are the highlights for both events. CLSF - 17th October XFS update (led by Jeff Liu) XFS keeps rapid progress with a lot of changes, especially focused on the infrastructure/performance improvements as well as  new feature development.  This can be reflected with a sample statistics among XFS/Ext4+JBD2/Btrfs via: # git diff --stat --minimal -C -M v3.7..v3.12-rc4 -- fs/xfs|fs/ext4+fs/jbd2|fs/btrfs XFS: 141 files changed, 27598 insertions(+), 19113 deletions(-) Ext4+JBD2: 39 files changed, 10487 insertions(+), 5454 deletions(-) Btrfs: 70 files changed, 19875 insertions(+), 8130 deletions(-) What made up those changes in XFS? Self-describing metadata(CRC32c). This is a new feature and it contributed about 70% code changes, it can be enabled via `mkfs.xfs -m crc=1 /dev/xxx` for v5 superblock. Transaction log space reservation improvements. With this change, we can calculate the log space reservation at mount time rather than runtime to reduce the the CPU overhead. User namespace support. So both XFS and USERNS can be enabled on kernel configuration begin from Linux 3.10. Thanks Dwight Engen's efforts for this thing. Split project/group quota inodes. Originally, project quota can not be enabled with group quota at the same time because they were share the same quota file inode, now it works but only for v5 super block. i.e, CRC enabled. CONFIG_XFS_WARN, an new lightweight runtime debugger which can be deployed in production environment. Readahead log object recovery, this change can speed up the log replay progress significantly. Speculative preallocation inode tracking, clearing and throttling. The main purpose is to deal with inodes with post-EOF space due to speculative preallocation, support improved quota management to free up a significant amount of unwritten space when at or near EDQUOT. It support backgroup scanning which occurs on a longish interval(5 mins by default, tunable), and on-demand scanning/trimming via ioctl(2). Bitter arguments ensued from this session, especially for the comparison between Ext4 and Btrfs in different areas, I have to spent a whole morning of the 1st day answering those questions. We basically agreed on XFS is the best choice in Linux nowadays because: Stable, XFS has a good record in stability in the past 10 years. Fengguang Wu who lead the 0-day kernel test project also said that he has observed less error than other filesystems in the past 1+ years, I own it to the XFS upstream code reviewer, they always performing serious code review as well as testing. Good performance for large/small files, XFS does not works very well for small files has already been an old story for years. Best choice (maybe) for distributed PB filesystems. e.g, Ceph recommends delopy OSD daemon on XFS because Ext4 has limited xattr size. Best choice for large storage (>16TB). Ext4 does not support a single file more than around 15.95TB. Scalability, any objection to XFS is best in this point? :) XFS is better to deal with transaction concurrency than Ext4, why? The maximum size of the log in XFS is 2038MB compare to 128MB in Ext4. Misc. Ext4 is widely used and it has been proved fast/stable in various loads and scenarios, XFS just need more customers, and Btrfs is still on the road to be a manhood. Ceph Introduction (Led by Li Wang) This a hot topic.  Li gave us a nice introduction about the design as well as their current works. Actually, Ceph client has been included in Linux kernel since 2.6.34 and supported by Openstack since Folsom but it seems that it has not yet been widely deployment in production environment. Their major work is focus on the inline data support to separate the metadata and data storage, reduce the file access time, i.e, a file access need communication twice, fetch the metadata from MDS and then get data from OSD, and also, the small file access is limited by the network latency. The solution is, for the small files they would like to store the data at metadata so that when accessing a small file, the metadata server can push both metadata and data to the client at the same time. In this way, they can reduce the overhead of calculating the data offset and save the communication to OSD. For this feature, they have only run some small scale testing but really saw noticeable improvements. Test environment: Intel 2 CPU 12 Core, 64GB RAM, Ubuntu 12.04, Ceph 0.56.6 with 200GB SATA disk, 15 OSD, 1 MDS, 1 MON. The sequence read performance for 1K size files improved about 50%. I have asked Li and Zheng Yan (the core developer of Ceph, who also worked on Btrfs) whether Ceph is really stable and can be deployed at production environment for large scale PB level storage, but they can not give a positive answer, looks Ceph even does not spread over Dreamhost (subject to confirmation). From Li, they only deployed Ceph for a small scale storage(32 nodes) although they'd like to try 6000 nodes in the future. Improve Linux swap for Flash storage (led by Shaohua Li) Because of high density, low power and low price, flash storage (SSD) is a good candidate to partially replace DRAM. A quick answer for this is using SSD as swap. But Linux swap is designed for slow hard disk storage, so there are a lot of challenges to efficiently use SSD for swap. SWAPOUT swap_map scan swap_map is the in-memory data structure to track swap disk usage, but it is a slow linear scan. It will become a bottleneck while finding many adjacent pages in the use of SSD. Shaohua Li have changed it to a cluster(128K) list, resulting in O(1) algorithm. However, this apporoach needs restrictive cluster alignment and only enabled for SSD. IO pattern In most cases, the swap io is in interleaved pattern because of mutiple reclaimers or a free cluster is shared by all reclaimers. Even though block layer can merge interleaved IO to some extent, but we cannot count on it completely. Hence the per-cpu cluster is added base on the previous change, it can help reclaimer do sequential IO and the block layer will be easier to merge IO. TLB flush: If we're reclaiming one active page, we should first move the page from active lru list to inactive lru list, and then reclaim the page from inactive lru to swap it out. During the process, we need to clear PTE twice: first is 'A'(ACCESS) bit, second is 'P'(PRESENT) bit. Processors need to send lots of ipi which make the TLB flush really expensive. Some works have been done to improve this, including rework smp_call_functiom_many() or remove the first TLB flush in x86, but there still have some arguments here and only parts of works have been pushed to mainline. SWAPIN: Page fault does iodepth=1 sync io, but it's a little waste if only issue a page size's IO. The obvious solution is doing swap readahead. But the current in-kernel swap readahead is arbitary(always 8 pages), and it always doesn't perform well for both random and sequential access workload. Shaohua introduced a new flag for madvise(MADV_WILLNEED) to do swap prefetch, so the changes happen in userspace API and leave the in-kernel readahead unchanged(but I think some improvement can also be done here). SWAP discard As we know, discard is important for SSD write throughout, but the current swap discard implementation is synchronous. He changed it to async discard which allow discard and write run in the same time. Meanwhile, the unit of discard is also optimized to cluster. Misc: lock contention For many concurrent swapout and swapin , the lock contention such as anon_vma or swap_lock is high, so he changed the swap_lock to a per-swap lock. But there still have some lock contention in very high speed SSD because of swapcache address_space lock. Zproject (led by Bob Liu) Bob gave us a very nice introduction about the current memory compression status. Now there are 3 projects(zswap/zram/zcache) which all aim at smooth swap IO storm and promote performance, but they all have their own pros and cons. ZSWAP It is implemented based on frontswap API and it uses a dynamic allocater named Zbud to allocate free pages. Zbud means pairs of zpages are "buddied" and it can only store at most two compressed pages in one page frame, so the max compress ratio is 50%. Each page frame is lru-linked and can do shink in memory pressure. If the compressed memory pool reach its limitation, shink or reclaim happens. It decompress the page frame into two new allocated pages and then write them to real swap device, but it can fail when allocating the two pages. ZRAM Acts as a compressed ramdisk and used as swap device, and it use zsmalloc as its allocator which has high density but may have fragmentation issues. Besides, page reclaim is hard since it will need more pages to uncompress and free just one page. ZRAM is preferred by embedded system which may not have any real swap device. Now both ZRAM and ZSWAP are in driver/staging tree, and in the mm community there are some disscussions of merging ZRAM into ZSWAP or viceversa, but no agreement yet. ZCACHE Handles file page compression but it is removed out of staging recently. From industry (led by Tang Jie, LSI) An LSI engineer introduced several new produces to us. The first is raid5/6 cards that it use full stripe writes to improve performance. The 2nd one he introduced is SandForce flash controller, who can understand data file types (data entropy) to reduce write amplification (WA) for nearly all writes. It's called DuraWrite and typical WA is 0.5. What's more, if enable its Dynamic Logical Capacity function module, the controller can do data compression which is transparent to upper layer. LSI testing shows that with this virtual capacity enables 1x TB drive can support up to 2x TB capacity, but the application must monitor free flash space to maintain optimal performance and to guard against free flash space exhaustion. He said the most useful application is for datebase. Another thing I think it's worth to mention is that a NV-DRAM memory in NMR/Raptor which is directly exposed to host system. Applications can directly access the NV-DRAM via a memory address - using standard system call mmap(). He said that it is very useful for database logging now. This kind of NVM produces are beginning to appear in recent years, and it is said that Samsung is building a research center in China for related produces. IMHO, NVM will bring an effect to current os layer especially on file system, e.g. its journaling may need to redesign to fully utilize these nonvolatile memory. OCFS2 (led by Canquan Shen) Without a doubt, HuaWei is the biggest contributor to OCFS2 in the past two years. They have posted 46 upstream patches and 39 patches have been merged. Their current project is based on 32/64 nodes cluster, but they also tried 128 nodes at the experimental stage. The major work they are working is to support ATS (atomic test and set), it can be works with DLM at the same time. Looks this idea is inspired by the vmware VMFS locking, i.e, http://blogs.vmware.com/vsphere/2012/05/vmfs-locking-uncovered.html CLK - 18th October 2013 Improving Linux Development with Better Tools (Andi Kleen) This talk focused on how to find/solve bugs along with the Linux complexity growing. Generally, we can do this with the following kind of tools: Static code checkers tools. e.g, sparse, smatch, coccinelle, clang checker, checkpatch, gcc -W/LTO, stanse. This can help check a lot of things, simple mistakes, complex problems, but the challenges are: some are very slow, false positives, may need a concentrated effort to get false positives down. Especially, no static checker I found can follow indirect calls (“OO in C”, common in kernel): struct foo_ops { int (*do_foo)(struct foo *obj); } foo->do_foo(foo); Dynamic runtime checkers, e.g, thread checkers, kmemcheck, lockdep. Ideally all kernel code would come with a test suite, then someone could run all the dynamic checkers. Fuzzers/test suites. e.g, Trinity is a great tool, it finds many bugs, but needs manual model for each syscall. Modern fuzzers around using automatic feedback, but notfor kernel yet: http://taviso.decsystem.org/making_software_dumber.pdf Debuggers/Tracers to understand code, e.g, ftrace, can dump on events/oops/custom triggers, but still too much overhead in many cases to run always during debug. Tools to read/understand source, e.g, grep/cscope work great for many cases, but do not understand indirect pointers (OO in C model used in kernel), give us all “do_foo” instances: struct foo_ops { int (*do_foo)(struct foo *obj); } = { .do_foo = my_foo }; foo>do_foo(foo); That would be great to have a cscope like tool that understands this based on types/initializers XFS: The High Performance Enterprise File System (Jeff Liu) [slides] I gave a talk for introducing the disk layout, unique features, as well as the recent changes.   The slides include some charts to reflect the performances between XFS/Btrfs/Ext4 for small files. About a dozen users raised their hands when I asking who has experienced with XFS. I remembered that when I asked the same question in LinuxCon/Japan, only 3 people raised their hands, but they are Chris Mason, Ric Wheeler, and another attendee. The attendee questions were mainly focused on stability, and comparison with other file systems. Linux Containers (Feng Gao) The speaker introduced us that the purpose for those kind of namespaces, include mount/UTS/IPC/Network/Pid/User, as well as the system API/ABI. For the userspace tools, He mainly focus on the Libvirt LXC rather than us(LXC). Libvirt LXC is another userspace container management tool, implemented as one type of libvirt driver, it can manage containers, create namespace, create private filesystem layout for container, Create devices for container and setup resources controller via cgroup. In this talk, Feng also mentioned another two possible new namespaces in the future, the 1st is the audit, but not sure if it should be assigned to user namespace or not. Another is about syslog, but the question is do we really need it? In-memory Compression (Bob Liu) Same as CLSF, a nice introduction that I have already mentioned above. Misc There were some other talks related to ACPI based memory hotplug, smart wake-affinity in scheduler etc., but my head is not big enough to record all those things. -- Jeff Liu

  Read the article

• LLBLGen Pro feature highlights: automatic element name construction

  - by FransBouma

  (This post is part of a series of posts about features of the LLBLGen Pro system) One of the things one might take for granted but which has a huge impact on the time spent in an entity modeling environment is the way the system creates names for elements out of the information provided, in short: automatic element name construction. Element names are created in both directions of modeling: database first and model first and the more names the system can create for you without you having to rename them, the better. LLBLGen Pro has a rich, fine grained system for creating element names out of the meta-data available, which I'll describe more in detail below. First the model element related element naming features are highlighted, in the section Automatic model element naming features and after that I'll go more into detail about the relational model element naming features LLBLGen Pro has to offer in the section Automatic relational model element naming features. Automatic model element naming features When working database first, the element names in the model, e.g. entity names, entity field names and so on, are in general determined from the relational model element (e.g. table, table field) they're mapped on, as the model elements are reverse engineered from these relational model elements. It doesn't take rocket science to automatically name an entity Customer if the entity was created after reverse engineering a table named Customer. It gets a little trickier when the entity which was created by reverse engineering a table called TBL_ORDER_LINES has to be named 'OrderLine' automatically. Automatic model element naming also takes into effect with model first development, where some settings are used to provide you with a default name, e.g. in the case of navigator name creation when you create a new relationship. The features below are available to you in the Project Settings. Open Project Settings on a loaded project and navigate to Conventions -> Element Name Construction. Strippers! The above example 'TBL_ORDER_LINES' shows that some parts of the table name might not be needed for name creation, in this case the 'TBL_' prefix. Some 'brilliant' DBAs even add suffixes to table names, fragments you might not want to appear in the entity names. LLBLGen Pro offers you to define both prefix and suffix fragments to strip off of table, view, stored procedure, parameter, table field and view field names. In the example above, the fragment 'TBL_' is a good candidate for such a strip pattern. You can specify more than one pattern for e.g. the table prefix strip pattern, so even a really messy schema can still be used to produce clean names. Underscores Be Gone Another thing you might get rid of are underscores. After all, most naming schemes for entities and their classes use PasCal casing rules and don't allow for underscores to appear. LLBLGen Pro can automatically strip out underscores for you. It's an optional feature, so if you like the underscores, you're not forced to see them go: LLBLGen Pro will leave them alone when ordered to to so. PasCal everywhere... or not, your call LLBLGen Pro can automatically PasCal case names on word breaks. It determines word breaks in a couple of ways: a space marks a word break, an underscore marks a word break and a case difference marks a word break. It will remove spaces in all cases, and based on the underscore removal setting, keep or remove the underscores, and upper-case the first character of a word break fragment, and lower case the rest. Say, we keep the defaults, which is remove underscores and PasCal case always and strip the TBL_ fragment, we get with our example TBL_ORDER_LINES, after stripping TBL_ from the table name two word fragments: ORDER and LINES. The underscores are removed, the first character of each fragment is upper-cased, the rest lower-cased, so this results in OrderLines. Almost there! Pluralization and Singularization In general entity names are singular, like Customer or OrderLine so LLBLGen Pro offers a way to singularize the names. This will convert OrderLines, the result we got after the PasCal casing functionality, into OrderLine, exactly what we're after. Show me the patterns! There are other situations in which you want more flexibility. Say, you have an entity Customer and an entity Order and there's a foreign key constraint defined from the target of Order and the target of Customer. This foreign key constraint results in a 1:n relationship between the entities Customer and Order. A relationship has navigators mapped onto the relationship in both entities the relationship is between. For this particular relationship we'd like to have Customer as navigator in Order and Orders as navigator in Customer, so the relationship becomes Customer.Orders 1:n Order.Customer. To control the naming of these navigators for the various relationship types, LLBLGen Pro defines a set of patterns which allow you, using macros, to define how the auto-created navigator names will look like. For example, if you rather have Customer.OrderCollection, you can do so, by changing the pattern from {$EndEntityName$P} to {$EndEntityName}Collection. The $P directive makes sure the name is pluralized, which is not what you want if you're going for <EntityName>Collection, hence it's removed. When working model first, it's a given you'll create foreign key fields along the way when you define relationships. For example, you've defined two entities: Customer and Order, and they have their fields setup properly. Now you want to define a relationship between them. This will automatically create a foreign key field in the Order entity, which reflects the value of the PK field in Customer. (No worries if you hate the foreign key fields in your classes, on NHibernate and EF these can be hidden in the generated code if you want to). A specific pattern is available for you to direct LLBLGen Pro how to name this foreign key field. For example, if all your entities have Id as PK field, you might want to have a different name than Id as foreign key field. In our Customer - Order example, you might want to have CustomerId instead as foreign key name in Order. The pattern for foreign key fields gives you that freedom. Abbreviations... make sense of OrdNr and friends I already described word breaks in the PasCal casing paragraph, how they're used for the PasCal casing in the constructed name. Word breaks are used for another neat feature LLBLGen Pro has to offer: abbreviation support. Burt, your friendly DBA in the dungeons below the office has a hate-hate relationship with his keyboard: he can't stand it: typing is something he avoids like the plague. This has resulted in tables and fields which have names which are very short, but also very unreadable. Example: our TBL_ORDER_LINES example has a lovely field called ORD_NR. What you would like to see in your fancy new OrderLine entity mapped onto this table is a field called OrderNumber, not a field called OrdNr. What you also like is to not have to rename that field manually. There are better things to do with your time, after all. LLBLGen Pro has you covered. All it takes is to define some abbreviation - full word pairs and during reverse engineering model elements from tables/views, LLBLGen Pro will take care of the rest. For the ORD_NR field, you need two values: ORD as abbreviation and Order as full word, and NR as abbreviation and Number as full word. LLBLGen Pro will now convert every word fragment found with the word breaks which matches an abbreviation to the given full word. They're case sensitive and can be found in the Project Settings: Navigate to Conventions -> Element Name Construction -> Abbreviations. Automatic relational model element naming features Not everyone works database first: it may very well be the case you start from scratch, or have to add additional tables to an existing database. For these situations, it's key you have the flexibility that you can control the created table names and table fields without any work: let the designer create these names based on the entity model you defined and a set of rules. LLBLGen Pro offers several features in this area, which are described in more detail below. These features are found in Project Settings: navigate to Conventions -> Model First Development. Underscores, welcome back! Not every database is case insensitive, and not every organization requires PasCal cased table/field names, some demand all lower or all uppercase names with underscores at word breaks. Say you create an entity model with an entity called OrderLine. You work with Oracle and your organization requires underscores at word breaks: a table created from OrderLine should be called ORDER_LINE. LLBLGen Pro allows you to do that: with a simple checkbox you can order LLBLGen Pro to insert an underscore at each word break for the type of database you're working with: case sensitive or case insensitive. Checking the checkbox Insert underscore at word break case insensitive dbs will let LLBLGen Pro create a table from the entity called Order_Line. Half-way there, as there are still lower case characters there and you need all caps. No worries, see below Casing directives so everyone can sleep well at night For case sensitive databases and case insensitive databases there is one setting for each of them which controls the casing of the name created from a model element (e.g. a table created from an entity definition using the auto-mapping feature). The settings can have the following values: AsProjectElement, AllUpperCase or AllLowerCase. AsProjectElement is the default, and it keeps the casing as-is. In our example, we need to get all upper case characters, so we select AllUpperCase for the setting for case sensitive databases. This will produce the name ORDER_LINE. Sequence naming after a pattern Some databases support sequences, and using model-first development it's key to have sequences, when needed, to be created automatically and if possible using a name which shows where they're used. Say you have an entity Order and you want to have the PK values be created by the database using a sequence. The database you're using supports sequences (e.g. Oracle) and as you want all numeric PK fields to be sequenced, you have enabled this by the setting Auto assign sequences to integer pks. When you're using LLBLGen Pro's auto-map feature, to create new tables and constraints from the model, it will create a new table, ORDER, based on your settings I previously discussed above, with a PK field ID and it also creates a sequence, SEQ_ORDER, which is auto-assigns to the ID field mapping. The name of the sequence is created by using a pattern, defined in the Model First Development setting Sequence pattern, which uses plain text and macros like with the other patterns previously discussed. Grouping and schemas When you start from scratch, and you're working model first, the tables created by LLBLGen Pro will be in a catalog and / or schema created by LLBLGen Pro as well. If you use LLBLGen Pro's grouping feature, which allows you to group entities and other model elements into groups in the project (described in a future blog post), you might want to have that group name reflected in the schema name the targets of the model elements are in. Say you have a model with a group CRM and a group HRM, both with entities unique for these groups, e.g. Employee in HRM, Customer in CRM. When auto-mapping this model to create tables, you might want to have the table created for Employee in the HRM schema but the table created for Customer in the CRM schema. LLBLGen Pro will do just that when you check the setting Set schema name after group name to true (default). This gives you total control over where what is placed in the database from your model. But I want plural table names... and TBL_ prefixes! For now we follow best practices which suggest singular table names and no prefixes/suffixes for names. Of course that won't keep everyone happy, so we're looking into making it possible to have that in a future version. Conclusion LLBLGen Pro offers a variety of options to let the modeling system do as much work for you as possible. Hopefully you enjoyed this little highlight post and that it has given you new insights in the smaller features available to you in LLBLGen Pro, ones you might not have thought off in the first place. Enjoy!

  Read the article

• Transformation of Product Management in Telecommunications for Rapid Launch of Next Generation Products

  - by raul.goycoolea

  @font-face { font-family: "Arial"; }@font-face { font-family: "Courier New"; }@font-face { font-family: "Wingdings"; }@font-face { font-family: "Cambria"; }p.MsoNormal, li.MsoNormal, div.MsoNormal { margin: 0cm 0cm 0.0001pt; font-size: 12pt; font-family: "Times New Roman"; }a:link, span.MsoHyperlink { color: blue; text-decoration: underline; }a:visited, span.MsoHyperlinkFollowed { color: purple; text-decoration: underline; }p.MsoListParagraph, li.MsoListParagraph, div.MsoListParagraph { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraphCxSpFirst, li.MsoListParagraphCxSpFirst, div.MsoListParagraphCxSpFirst { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraphCxSpMiddle, li.MsoListParagraphCxSpMiddle, div.MsoListParagraphCxSpMiddle { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }p.MsoListParagraphCxSpLast, li.MsoListParagraphCxSpLast, div.MsoListParagraphCxSpLast { margin: 0cm 0cm 0.0001pt 36pt; font-size: 12pt; font-family: "Times New Roman"; }div.Section1 { page: Section1; }ol { margin-bottom: 0cm; }ul { margin-bottom: 0cm; } The Telecom industry continues to evolve through disruptive products, uncertain markets, shorter product lifecycles and convergence of technologies. Today’s market has moved from network centric to consumer centric and focuses primarily on the customer experience. It has resulted in several product management challenges such as an increased complexity and volume of offerings, creating product variants, accelerating time-to-market, ability to provide multiple product views for varied stakeholders, leveraging OSS intelligence to BSS layer, product co-creation and increasing audit and security concerns for service providers. The document discusses how enterprise product management enabled by PLM-based product catalogue solutions helps to launch next generation products rapidly in the context of the Telecommunication Industry.   1.0.       Introduction   Figure 1: Business Scenario   Modern business demands the launch of complex products in a very short timeframe and effecting changes in the price plan faster without IT intervention. One of the key transformation initiatives companies are focusing on is in the area of product management transformation and operational efficiency improvement. As part of these initiatives, companies are investing in best- in-class COTs-based Product Management solutions developed on industry-wide standards.   The new COTs packages are planned to integrate with existing or new B/OSS systems to provide a strategic end-to-end agile solution for reduced time-to-market and order journey time. In addition, system rationalization is being undertaken to phase out legacy systems and migrate to strategic systems.   2.0.       An Overview of Product Management in Telecom   Product data in telecom is multi- dimensional and difficult to manage. It increased significantly due to the complexity of the product, product offerings on the converged network, increased volume of offerings, bundled offering structures and ever increasing regulatory requirements.   In addition, the shrinking product lifecycle in telecom makes it difficult to manage the dynamic product data. Mergers and acquisitions coupled with organic growth pose major challenges in product portfolio management. It is a roadblock in the journey towards becoming an agile organization.       Figure 2: Complexity in Product Management   Network Technology’ is the new dimension in telecom product management where the same products are realized through different networks i.e., Soiled network to Converged network. Consequently, the product solution is different.     Figure 3: Current Scenario - Pain Points in Product Management   The major business implications arising out of the current scenario are slow time-to-market and an inefficient process that affects innovation.   3.0. Transformation of Next Generation Product Management   Companies must focus on their Product Management Transformation Journey in the areas of:   ·       Management of single truth of product information across the organization/geographies which is currently managed in heterogeneous systems   ·       Management of the Intellectual Property (IP) on the product concept and partnership in the design of discrete components to integrate into the system   ·       Leveraging structured and unstructured product data within the extended enterprise to extract consumer insights and drive innovation   ·       Management of effective operational separation to comply with regulatory bodies   ·       Reuse of existing designs and add relevant features such as value-added services to enable effective product bundling     Figure 4: Next generation needs   PLM-based Enterprise Product Catalogue solutions efficiently address the above requirements and act as an enabler towards product management transformation and rapid product launch.   4.0. PLM-based Enterprise Product Management     Figure 5: PLM-based Enterprise Product Mastering   Enterprise Product Management (EPM) enables the business to manage complex product attributes of data in complex environments. Product Mastering helps create a 'single view' of the product by creating a business-driven, IT-supported environment where a global 'single truth record' is created, managed and reused.   4.1 The Business Case for Telco PLM-based solutions for Enterprise Product Management   ·       Telco PLM-based Product Mastering solutions provide a centralized authoring environment for product definition and control of all product data and rules   ·       PLM packages are designed to support multiple perspectives of product data (ordering perspective, billing perspective, provisioning perspective)   ·       Maintains relationships/links between different elements of the entire product definition   ·       Telco PLM packages are specialized in next generation lifecycle management requirements of products such as revision and state management, test and release management, role management and impact analysis)   ·       Takes into consideration all aspects of OSS product requirements compared to CRM product catalogue solutions where the product data managed is mostly order oriented and transactional     ·       New breed of Telco PLM packages are designed with 'open' standards such as SID and eTOM. They are interoperable, support integration frameworks such as subscription and notification.   ·       Telco PLM packages have developed good collaboration frameworks to integrate suppliers and partners into the product development value chain   4.2 Various Architectures/Approaches for Product Mastering using Telco PLM systems   4. 2.a Single Central Product Management (Mastering) Approach   Figure 6: Single Central Product Management (Master) Approach       This approach is implemented across verticals such as aerospace and automotive. It focuses on a physically centralized product master to which other sources are dependent on. The product definition data (Product bundles, service bundles, price plans, offers and discounts, product configuration rules and market campaigns) is created and maintained physically in a centralized environment. In addition, the product definition/authoring environment is centralized. The existing legacy product definition data available in CRM product catalogue, billing catalogue and the legacy product catalogue is migrated to the centralized PLM-based Enterprise Product Management solution.   Architectural changes must be made in the existing business landscape of applications to create and revise data because the applications have to refer to the central repository for approvals and validation of product configurations. It is achieved by modifying how the applications write data or how the applications can be adapted to use the rules to be managed and published.   Complete product configuration validation will be done in enterprise / central product catalogue and final configuration will be sent to the B/OSS system through the SOA compliant product distribution architecture. The approach/architecture enables greater control in terms of product data management and product data governance.   4.2.b Federated Product Management (Mastering) Architecture     Figure 7: Federated Product Management (Mastering) Architecture   In the federated product mastering approach, the basic unique product definition data (product id, description product hierarchy, basic price plans and simple product design rules) will be centrally created and will be maintained. And, the advanced product definition (Product bundling, promotions, offers & discount plans) will be created in respective down stream OSS systems. The advanced product definition (Product bundling, promotions, offers and discount plans) will be created in respective downstream OSS systems.   For example, basic product definitions such as attributes, product hierarchy and basic price plans will be created and maintained in Enterprise/Central product reference catalogue and distributed to downstream OSS systems. Respective downstream OSS systems build product bundles, promotions, advanced price plans over the basic product definition and master the advanced product definition. Central reference database accesses the respective other source product master data and assembles a point-in-time consolidated view of the product. The approach is typically adapted in some merger and acquisition scenarios where there is a low probability of a central physical authority managing the data. In addition, the migration effort in this case is minimal and there are no big architectural changes to the organization application landscape. However, this approach will not result in better product data management and data governance.   5.0 Customer Scenario – Before EPC deployment   A leading global telecommunications service provider wanted to launch a quad play and triple play service offering in the shortest possible lead time. The service provider was offering Broadband and VoIP services to customers. The company wanted to reuse a majority of the Broadband services and price plans and bundle them with new wireless and IPTV services for quad play and triple play. The challenges in launching the new service offerings were:       Figure 8: Triple Play Plan   ·       Broadband product data was stored in multiple product catalogues (CRM catalogue, Billing catalogue, spread sheets)   ·       Product managers spent a lot of time performing tasks involving duplication or re-keying of data. Manual effort caused errors, cost and time over-runs.   ·       No effective product and price data governance mechanism. Price change issues arising from the lack of data consistency across systems resulted in leakage of customer value and revenue.   ·       Product data had re-usability issues and was not in a structured format. It resulted in uncontrolled product portfolio creation and product management issues.   ·       Lack of enterprise product model resulted into product distribution challenges and thus delays in product launch.   ·       Designers are constrained by existing legacy product management solutions to model product/service requirements and product configuration rules such as upgrading, downgrading and cross selling.    5.1 Customer Scenario - After EPC deployment     Figure 9: SOA-based end-to-end EPC Solution   The company deployed PLM-based Enterprise Product Catalogue solutions to launch quad play service after evaluating various product catalogues. The broadband product offering, service and price data were migrated to the new system, and the product and price plan hierarchy for new offerings were created using the entities defined in the Enterprise Product Model. Supplier product catalogue data such as routers and set up boxes were loaded onto the new solution through SOA-based web service. Price plans and configuration rules were built in the new system. The validated final product configurations were extracted from the product catalogue in a SID format and were distributed to the downstream B/OSS systems through exposed SOA-based web services. The transformations required for the B/OSS system were handled using the transformation layer as part of the solution.   6.0 How PLM enabled Product Management Transformation         Figure 10: Product Management Transformation     PLM-based Product Catalogue Solution helped the customer reduce the product launch cycle time by 30% and enable transformation of Product Management for next generation services.   7.0 Conclusion   On the one hand, the telecom industry is undergoing changes due to disruptions, uncertain product markets and increased complexity of products. On the other hand, the ARPU is decreasing year-on-year. Communications Service Providers are embarking on convergence, bundled service offerings, flexibility to cross-sell and up-sell, introduce new value-added services, leverage Web 2.0 concepts and network capabilities. Consequently, large scale IT transformation initiatives to improve their ARPU supporting network and business transformations are a business imperative. Product Management has become a focus area. Companies are investing in best-in- class COTS solutions to reduce time-to-market, ensure rapid service delivery and improve operational efficiency. An efficient PLM-based enterprise product mastering solution plays a key role in achieving zero touch automation and rapid product launch.   References:   1.     Preston G.Smith, Donald G.Reineristsem, Van Nostrand Reinhold “Developing Products in Half the time”.   2.     John G. Innes, "Achieving Successful Product Change", Pitman Publishing.   3.     D T Pham and R M Setchi (16th Jan, 2001) "Authoring environment for documentation development" University of Wales Cardiff, U.K., Proceedings on Institution of Mechanical Engineers, Vol. 215, Part B.   4.     Oracle Product Hub for Communications:   http://www.oracle.com/us/products/applications/master-data-management/product-hub-082059.html  

  Read the article

• Oracle BI Server Modeling, Part 1- Designing a Query Factory

  - by bob.ertl(at)oracle.com

    Welcome to Oracle BI Development's BI Foundation blog, focused on helping you get the most value from your Oracle Business Intelligence Enterprise Edition (BI EE) platform deployments.  In my first series of posts, I plan to show developers the concepts and best practices for modeling in the Common Enterprise Information Model (CEIM), the semantic layer of Oracle BI EE.  In this segment, I will lay the groundwork for the modeling concepts.  First, I will cover the big picture of how the BI Server fits into the system, and how the CEIM controls the query processing. Oracle BI EE Query Cycle The purpose of the Oracle BI Server is to bridge the gap between the presentation services and the data sources.  There are typically a variety of data sources in a variety of technologies: relational, normalized transaction systems; relational star-schema data warehouses and marts; multidimensional analytic cubes and financial applications; flat files, Excel files, XML files, and so on. Business datasets can reside in a single type of source, or, most of the time, are spread across various types of sources. Presentation services users are generally business people who need to be able to query that set of sources without any knowledge of technologies, schemas, or how sources are organized in their company. They think of business analysis in terms of measures with specific calculations, hierarchical dimensions for breaking those measures down, and detailed reports of the business transactions themselves.  Most of them create queries without knowing it, by picking a dashboard page and some filters.  Others create their own analysis by selecting metrics and dimensional attributes, and possibly creating additional calculations. The BI Server bridges that gap from simple business terms to technical physical queries by exposing just the business focused measures and dimensional attributes that business people can use in their analyses and dashboards.   After they make their selections and start the analysis, the BI Server plans the best way to query the data sources, writes the optimized sequence of physical queries to those sources, post-processes the results, and presents them to the client as a single result set suitable for tables, pivots and charts. The CEIM is a model that controls the processing of the BI Server.  It provides the subject areas that presentation services exposes for business users to select simplified metrics and dimensional attributes for their analysis.  It models the mappings to the physical data access, the calculations and logical transformations, and the data access security rules.  The CEIM consists of metadata stored in the repository, authored by developers using the Administration Tool client.     Presentation services and other query clients create their queries in BI EE's SQL-92 language, called Logical SQL or LSQL.  The API simply uses ODBC or JDBC to pass the query to the BI Server.  Presentation services writes the LSQL query in terms of the simplified objects presented to the users.  The BI Server creates a query plan, and rewrites the LSQL into fully-detailed SQL or other languages suitable for querying the physical sources.  For example, the LSQL on the left below was rewritten into the physical SQL for an Oracle 11g database on the right. Logical SQL   Physical SQL SELECT "D0 Time"."T02 Per Name Month" saw_0, "D4 Product"."P01  Product" saw_1, "F2 Units"."2-01  Billed Qty  (Sum All)" saw_2 FROM "Sample Sales" ORDER BY saw_0, saw_1       WITH SAWITH0 AS ( select T986.Per_Name_Month as c1, T879.Prod_Dsc as c2,      sum(T835.Units) as c3, T879.Prod_Key as c4 from      Product T879 /* A05 Product */ ,      Time_Mth T986 /* A08 Time Mth */ ,      FactsRev T835 /* A11 Revenue (Billed Time Join) */ where ( T835.Prod_Key = T879.Prod_Key and T835.Bill_Mth = T986.Row_Wid) group by T879.Prod_Dsc, T879.Prod_Key, T986.Per_Name_Month ) select SAWITH0.c1 as c1, SAWITH0.c2 as c2, SAWITH0.c3 as c3 from SAWITH0 order by c1, c2   Probably everybody reading this blog can write SQL or MDX.  However, the trick in designing the CEIM is that you are modeling a query-generation factory.  Rather than hand-crafting individual queries, you model behavior and relationships, thus configuring the BI Server machinery to manufacture millions of different queries in response to random user requests.  This mass production requires a different mindset and approach than when you are designing individual SQL statements in tools such as Oracle SQL Developer, Oracle Hyperion Interactive Reporting (formerly Brio), or Oracle BI Publisher.   The Structure of the Common Enterprise Information Model (CEIM) The CEIM has a unique structure specifically for modeling the relationships and behaviors that fill the gap from logical user requests to physical data source queries and back to the result.  The model divides the functionality into three specialized layers, called Presentation, Business Model and Mapping, and Physical, as shown below. Presentation services clients can generally only see the presentation layer, and the objects in the presentation layer are normally the only ones used in the LSQL request.  When a request comes into the BI Server from presentation services or another client, the relationships and objects in the model allow the BI Server to select the appropriate data sources, create a query plan, and generate the physical queries.  That's the left to right flow in the diagram below.  When the results come back from the data source queries, the right to left relationships in the model show how to transform the results and perform any final calculations and functions that could not be pushed down to the databases.   Business Model Think of the business model as the heart of the CEIM you are designing.  This is where you define the analytic behavior seen by the users, and the superset library of metric and dimension objects available to the user community as a whole.  It also provides the baseline business-friendly names and user-readable dictionary.  For these reasons, it is often called the "logical" model--it is a virtual database schema that persists no data, but can be queried as if it is a database. The business model always has a dimensional shape (more on this in future posts), and its simple shape and terminology hides the complexity of the source data models. Besides hiding complexity and normalizing terminology, this layer adds most of the analytic value, as well.  This is where you define the rich, dimensional behavior of the metrics and complex business calculations, as well as the conformed dimensions and hierarchies.  It contributes to the ease of use for business users, since the dimensional metric definitions apply in any context of filters and drill-downs, and the conformed dimensions enable dashboard-wide filters and guided analysis links that bring context along from one page to the next.  The conformed dimensions also provide a key to hiding the complexity of many sources, including federation of different databases, behind the simple business model. Note that the expression language in this layer is LSQL, so that any expression can be rewritten into any data source's query language at run time.  This is important for federation, where a given logical object can map to several different physical objects in different databases.  It is also important to portability of the CEIM to different database brands, which is a key requirement for Oracle's BI Applications products. Your requirements process with your user community will mostly affect the business model.  This is where you will define most of the things they specifically ask for, such as metric definitions.  For this reason, many of the best-practice methodologies of our consulting partners start with the high-level definition of this layer. Physical Model The physical model connects the business model that meets your users' requirements to the reality of the data sources you have available. In the query factory analogy, think of the physical layer as the bill of materials for generating physical queries.  Every schema, table, column, join, cube, hierarchy, etc., that will appear in any physical query manufactured at run time must be modeled here at design time. Each physical data source will have its own physical model, or "database" object in the CEIM.  The shape of each physical model matches the shape of its physical source.  In other words, if the source is normalized relational, the physical model will mimic that normalized shape.  If it is a hypercube, the physical model will have a hypercube shape.  If it is a flat file, it will have a denormalized tabular shape. To aid in query optimization, the physical layer also tracks the specifics of the database brand and release.  This allows the BI Server to make the most of each physical source's distinct capabilities, writing queries in its syntax, and using its specific functions. This allows the BI Server to push processing work as deep as possible into the physical source, which minimizes data movement and takes full advantage of the database's own optimizer.  For most data sources, native APIs are used to further optimize performance and functionality. The value of having a distinct separation between the logical (business) and physical models is encapsulation of the physical characteristics.  This encapsulation is another enabler of packaged BI applications and federation.  It is also key to hiding the complex shapes and relationships in the physical sources from the end users.  Consider a routine drill-down in the business model: physically, it can require a drill-through where the first query is MDX to a multidimensional cube, followed by the drill-down query in SQL to a normalized relational database.  The only difference from the user's point of view is that the 2nd query added a more detailed dimension level column - everything else was the same. Mappings Within the Business Model and Mapping Layer, the mappings provide the binding from each logical column and join in the dimensional business model, to each of the objects that can provide its data in the physical layer.  When there is more than one option for a physical source, rules in the mappings are applied to the query context to determine which of the data sources should be hit, and how to combine their results if more than one is used.  These rules specify aggregate navigation, vertical partitioning (fragmentation), and horizontal partitioning, any of which can be federated across multiple, heterogeneous sources.  These mappings are usually the most sophisticated part of the CEIM. Presentation You might think of the presentation layer as a set of very simple relational-like views into the business model.  Over ODBC/JDBC, they present a relational catalog consisting of databases, tables and columns.  For business users, presentation services interprets these as subject areas, folders and columns, respectively.  (Note that in 10g, subject areas were called presentation catalogs in the CEIM.  In this blog, I will stick to 11g terminology.)  Generally speaking, presentation services and other clients can query only these objects (there are exceptions for certain clients such as BI Publisher and Essbase Studio). The purpose of the presentation layer is to specialize the business model for different categories of users.  Based on a user's role, they will be restricted to specific subject areas, tables and columns for security.  The breakdown of the model into multiple subject areas organizes the content for users, and subjects superfluous to a particular business role can be hidden from that set of users.  Customized names and descriptions can be used to override the business model names for a specific audience.  Variables in the object names can be used for localization. For these reasons, you are better off thinking of the tables in the presentation layer as folders than as strict relational tables.  The real semantics of tables and how they function is in the business model, and any grouping of columns can be included in any table in the presentation layer.  In 11g, an LSQL query can also span multiple presentation subject areas, as long as they map to the same business model. Other Model Objects There are some objects that apply to multiple layers.  These include security-related objects, such as application roles, users, data filters, and query limits (governors).  There are also variables you can use in parameters and expressions, and initialization blocks for loading their initial values on a static or user session basis.  Finally, there are Multi-User Development (MUD) projects for developers to check out units of work, and objects for the marketing feature used by our packaged customer relationship management (CRM) software.   The Query Factory At this point, you should have a grasp on the query factory concept.  When developing the CEIM model, you are configuring the BI Server to automatically manufacture millions of queries in response to random user requests. You do this by defining the analytic behavior in the business model, mapping that to the physical data sources, and exposing it through the presentation layer's role-based subject areas. While configuring mass production requires a different mindset than when you hand-craft individual SQL or MDX statements, it builds on the modeling and query concepts you already understand. The following posts in this series will walk through the CEIM modeling concepts and best practices in detail.  We will initially review dimensional concepts so you can understand the business model, and then present a pattern-based approach to learning the mappings from a variety of physical schema shapes and deployments to the dimensional model.  Along the way, we will also present the dimensional calculation template, and learn how to configure the many additivity patterns.

  Read the article

• CodePlex Daily Summary for Tuesday, May 31, 2011

  CodePlex Daily Summary for Tuesday, May 31, 2011Popular ReleasesNearforums - ASP.NET MVC forum engine: Nearforums v6.0: Version 6.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Authentication using Membership Provider for SQL Server and MySql Spam prevention: Flood Control Moderation: Flag messages Content management: Pages: Create pages (about us/contact/texts) through web administration Allow nearforums to run as an IIS subapp Migrated Facebook Connect to OAuth 2.0 Visit the project Roadmap for more details.NetOffice - The easiest way to use Office in .NET: NetOffice Release 0.8b: Changes: - fix critical issue 15922(AccessViolationException) once and for all update is strongly recommended Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:..............................................................COM Proxy Management, Events, etc. - Examples in C# and VB.Net:............................................................Excel, Word, Outlook, PowerPoint, Access - COMAddin Examples in C# and VB....Facebook Graph Toolkit: Facebook Graph Toolkit 1.5.4186: Updates the API in response to Facebook's recent change of policy: All Graph Api accessing feeds or posts must provide a AccessToken.SharePoint Farm Poster: SharePoint Farm Poster: SharePoint Farm Poster is generated by a PowerShell Script. Run this script under the Farm Admin Account. After downloading, unblock the file in the Property Window. Current version is beta : v0.3.0VCC: Latest build, v2.1.40530.0: Automatic drop of latest buildServiio for Windows Home Server: Beta Release 0.5.2.0: Ready for widespread beta. Synchronized build number to Serviio version to avoid confusion.AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta4: ??AcDown?????????????，??????????????，????、????。?????Acfun????? ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??v3.0 Beta4 2011-5-31?? ???Bilibili.us????? ???? ?? ???"????" ???Bilibili.us??? ??????? ?? ??????? ?? ???????? ?? ?? ???Bilibili.us?????(??????????????????) ??????(6.cn)?????(????) ?? ?????Acfun?????????? ?????????????? ???QQ???????? ????????????Discussion...Terraria Map Generator: TerrariaMapTool 1.0.0.2 Beta: Version 1.0.0.2 Beta Release - Now has a Gui - Draws backgrounds (May still not be exact) - Hopefully fixed support on DirectX 9 machine.CodeCopy Auto Code Converter: Code Copy v0.1: Full add-in, setup project source code and setup fileEnhSim: EnhSim 2.4.5 ALPHA: 2.4.5 ALPHAThis release supports WoW patch 4.1 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in the T12 s...TerrariViewer: TerrariViewer v2.4.1: Added Piggy Bank editor and fixed some minor bugs.Kooboo CMS: Kooboo CMS 3.02: What is new in kooboo cms 3.02 The most important updates of this version is the Kooboo site builder, an unique and creative web design tool, design an professional website and export to Kooboo CMS. See: http://www.sitekin.com Add Version contorl on View, Layout and other elements. Add user CMS language selection, user can select a language to use on their CMS backend. Add User profile provider, you can use now stop website user information on a SQL database. Previously it stored on XML...mojoPortal: 2.3.6.6: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2366-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Terraria World Creator: Terraria World Creator: Version 1.01 Fixed a bug that would cause the application to crash. Re-named the Application.VidCoder: 0.9.0: New startup UI for one-click scanning of discs or opening a file/folder. New seek bar on the preview window to make switching previews easier (you can click anywhere on the bar). Added gradient backgrounds to the main window to visually group the sections. Added Open Video File and Open Video Folder options to the File menu. Moved preview button to be in line with the other control buttons. Fixed settings getting in a weird state if they were saved without an output folder being chos...General Media Access WebService: 0.2.0.0 Beta: Updated GMA release with sorting/ordering mechanisms. Several bug fixes.Microsoft All-In-One Code Framework - a centralized code sample library: All-In-One Code Framework 2011-05-26: Alternatively, you can install Sample Browser or Sample Browser VS extension, and download the code samples from Sample Browser. Improved and Newly Added Examples:For an up-to-date code sample index, please refer to All-In-One Code Framework Sample Catalog. NEW Samples for Dynamics Sample Description Owner CSDynamicsNAVWebServices The code sample shows syntax for calling Dynamics NAV Web Services. Lars Lohndorf-Larsen NEW Samples for WPF Sample Description Owner CSWPFDataGridCustomS...Terraria World Viewer: Version 1.1: Update May 26th Added Chest Filtering, this allows chests only containing certain items to have their symbol drawn. (Its under advanced settings tab) GUI elements (checkboxes/etc) are persistant between uses of the application Beta Worlds (i.e. Release #38) will work properly Symbols can be enabled or disabled on a per symbol basis Chest Information tab which is just a dump of the current chest information Meterorite is now visible as a bright magenta pink Application defaults to ...MVC Controls Toolkit: Mvc Controls Toolkit 1.1 RC: *Added: Compatibility with jQuery 1.6.1 Rendering of enumerables with images and/or customizable strings improved the client side tempate engine added new parameters to the template definition binding all new knockout bindings helpers have been fully implemented added a new overload for defining the client-side ViewModel The SetTme method has the option to store the theme in a permanent cookie If no CSS class is provided for the watermark of a TypedTextBox the watermark class of the current t...patterns & practices: Project Silk: Project Silk - Documentation Only Drop - May 24: To get the latest code, please see the previous drop here. Guidance Chapters Ready for Review The following chapters (provided in CHM or PDF format) are ready for community review. Our team very much appreciates your feedback and technical review. All documentation feedback should be posted in the Issue Tracker; if required, a document can be attached along with the feedback. Architecture jQuery UI Widgets Server-Side Implementation Security Unit Testing Web Applications Widget Q...New Projects#liveDB: liveDB is an in-memory database engine for Microsoft .NET providing full ACID support, lightning fast performance and offering a significant reduction of development and operational costs. liveDB is built on Live Domain Technology(TM).8 hours: 8hours Private studyABox2d: A port of Box 2d game engine doing it has an exercise to study how the game engine work.ADempiere.NET: If I have enough time and support I we will translate this into .NETAlmonaster: Almonaster is a turn-based multi-player war game. It is free for all players and comes with absolutely no warranty. The game is fully web-based and requires no downloads, Javascript, Java or ActiveX controls. ASPone API: ASPone partnerské API (aplikacní programové rozhraní) je rozhraní pro vytvorené a urcené pro partnery spolecnosti ASPone, s.r.o. Pomocí tohoto aplikacního rozhraní mužete zautomatizovat radu úkonu, které by pomocí webového rozhraní mohly být casove nárocnejší nebo vyžadují interakci cloveka. API umožnuje zautomatizovat radu úkonu souvisejících se správou domén, doménových kontaktu, webhostingu, databází, serveru a mnoha dalších. Pro zjednodušení práce s API jsou již pripraveni dva ukázkový...CodeCopy Auto Code Converter: This add-in project converts c# and vb.net codes in visual studio.drms: Data Resource Management SystemDrop Down CheckBoxList control (DropDownCheckBoxes): DropDownCheckBoxes is an ASP.NET server control directly inheriting standard ASP.NET CheckBoxList control and fully it supports parent's API (except members responsible for rendering and styling). Thus in most cases CheckBoxList control can be simply replaced with DropDownCheckBoxes with no need to change any data binding code or event handlers. In normal state the control is displayed as a select (DropDownList) control. Clicking the expand button shows a list with check boxes. When the se...Extended Registration module for Orchard CMS: This project has a dependency on the Contrib.Profile module. With this module enabled, users must fill out any parts you add to the User ContentItem in the Registration page. Ideal if you require additional information from your users.GreenWay: Car navigation softwareHost Profiles: Host Profiles is small tool to control, switch and management the hosts file of the computer. The hosts file is located in "c:\windows\system32\drivers\etc\hosts".HRM System MVVM sample code: This is the sample WPF MVVM application that i've described in my blog posts. I hope to give you a clear view of mvvm and other commonly used patterns.Mi Game Library: Ever wanted to store all the games you own into one place that you, could then later come see and search also with your own personal wish list!Micorrhiza: Micorrhiza is a client-server solution written in C# for voice- and video-communications between users in local and global networks.MPlayer.NET for Windows Forms & WPF: MPlayer.NET is a wrapper around MPlayer executable. It's developed on .NET platform and includes visual controls for both Windows Forms and WPF applications.MyGet - NuGet-as-a-Service: This project is the source for http://myget.org. MyGet offers you the possibility to create your own, private, filtered NuGet feed for use in the Visual Studio Package Manager. It can contain packages from the official NuGet feed as well as your private packages, hosted on MyGet.MZExtensions: A collection of handy C# Extension Methods.NCAds: NCadsNetSync: Universal file synchronization agent.OLE 1C7.7: OLE 1C7.7 ?????????? ??????? ??? ??????? ? 1?7.7 ????????? OLE ??????????.Pear 2.5: Pear 2.5 is a web browser which has MetroUI which is also known for WP7. Pear 2.5's graphics is totally made up with MetroUI and looks stunning when browse. This version has 3 builds - 2 alpha builds and 1 gamma delta (beta) build. It's developed in VB.NET which is the easiest.ProjectOne: ProjectOne is a Open Community Information Sharing Website regarding Realty as its primary source.russomi: russomiSopaco Server Foundation 1.x: The one earlier version of my server infrastructure(SSF, Sopaco Server Foundation 1.x, owned by ??)。 Network Layer Based On MINA， message meta in 1.x is hard coded to 6bytes message header like this struct NetworkMessageHeader { short msgId; int msgLength; } struct NetworkMTray Timer: A simple timer/stopwatch which runs fromt he system tray. I started it as a hobby learning project to understand the Win32 API. Now open sourcing it to get more inputs about the same, and at the same time it may prove helpful to othersVENSOFT DIPERCAX: Proyecto Final del Curso de Proyectos II de la Universidad Privada del NorteWindows Phone Blog Menu: A Silverlight navigation control that looks like a Windows Phone 7. The live tiles are links to websites. Use this control on your blog or website to show your love for WP7. It is a creative way to link to external sites you are interested in.

  Read the article

• Using Oracle Proxy Authentication with JPA (eclipselink-Style)

  - by olaf.heimburger

  Security is a very intriguing topic. You will find it everywhere and you need to implement it everywhere. Yes, you need. Unfortunately, one can easily forget it while implementing the last mile. The Last Mile In a multi-tier application it is a common practice to use connection pools between the business layer and the database layer. Connection pools are quite useful to speed database connection creation and to split the load. Another very common practice is to use a specific, often called technical, user to connect to the database. This user has authentication and authorization rules that apply to all application users. Imagine you've put every effort to define roles for different types of users that use your application. These roles are necessary to differentiate between normal users, premium users, and administrators (I bet you will find or already have more roles in your application). While these user roles are pretty well used within your application, once the flow of execution enters the database everything is gone. Each and every user just has one role and is the same database user. Issues? What Issues? As long as things go well, this is not a real issue. However, things do not go well all the time. Once your application becomes famous performance decreases in certain situations or, more importantly, current and upcoming regulations and laws require that your application must be able to apply different security measures on a per user role basis at every stage of your application. If you only have a bunch of users with the same name and role you are not able to find the application usage profile that causes the performance issue, or which user has accessed data that he/she is not allowed to. Another thread to your role concept is that databases tend to be used by different applications and tools. These tools can be developer tools like SQL*Plus, SQL Developer, etc. or end user applications like BI Publisher, Oracle Forms and so on. These tools have no idea of your applications role concept and access the database the way they think is appropriate. A big oversight for your perfect role model and a big nightmare for your Chief Security Officer. Speaking of the CSO, brings up another issue: Password management. Once your technical user account is compromised, every user is able to do things that he/she is not expected to do from the design of your application. Counter Measures In the Oracle world a common counter measure is to use Virtual Private Database (VPD). This restricts the values a database user can see to the allowed minimum. However, it doesn't help in regard of a connection pool user, because this one is still not the real user. Oracle Proxy Authentication Another feature of the Oracle database is Proxy Authentication. First introduced with version 9i it is a quite useful feature for nearly every situation. The main idea behind Proxy Authentication is, to create a crippled database user who has only connect rights. Even if this user is compromised the risks are well understood and fairly limited. This user can be used in every situation in which you need to connect to the database, no matter which tool or application (see above) you use.The proxy user is perfect for multi-tier connection pools. CREATE USER app_user IDENTIFIED BY abcd1234; GRANT CREATE SESSION TO app_user; But what if you need to access real data? Well, this is the primary use case, isn't it? Now is the time to bring the application's role concept into play. You define database roles that define the grants for your identified user groups. Once you have these groups you grant access through the proxy user with the application role to the specific user. CREATE ROLE app_role_a; GRANT app_role_a TO scott; ALTER USER scott GRANT CONNECT THROUGH app_user WITH ROLE app_role_a; Now, hr has permission to connect to the database through the proxy user. Through the role you can restrict the hr's rights the are needed for the application only. If hr connects to the database directly all assigned role and permissions apply. Testing the Setup To test the setup you can use SQL*Plus and connect to your database: $ sqlplus app_user[hr]/abcd1234 Java Persistence API The Java Persistence API (JPA) is a fairly easy means to build applications that retrieve data from the database and put it into Java objects. You use plain old Java objects (POJOs) and mixin some Java annotations that define how the attributes of the object are used for storing data from the database into the Java object. Here is a sample for objects from the HR sample schema EMPLOYEES table. When using Java annotations you only specify what can not be deduced from the code. If your Java class name is Employee but the table name is EMPLOYEES, you need to specify the table name, otherwise it will fail. package demo.proxy.ejb; import java.io.Serializable; import java.sql.Timestamp; import java.util.List; import javax.persistence.Column; import javax.persistence.Entity; import javax.persistence.Id; import javax.persistence.JoinColumn; import javax.persistence.ManyToOne; import javax.persistence.NamedQueries; import javax.persistence.NamedQuery; import javax.persistence.OneToMany; import javax.persistence.Table; @Entity @NamedQueries({ @NamedQuery(name = "Employee.findAll", query = "select o from Employee o") }) @Table(name = "EMPLOYEES") public class Employee implements Serializable { @Column(name="COMMISSION_PCT") private Double commissionPct; @Column(name="DEPARTMENT_ID") private Long departmentId; @Column(nullable = false, unique = true, length = 25) private String email; @Id @Column(name="EMPLOYEE_ID", nullable = false) private Long employeeId; @Column(name="FIRST_NAME", length = 20) private String firstName; @Column(name="HIRE_DATE", nullable = false) private Timestamp hireDate; @Column(name="JOB_ID", nullable = false, length = 10) private String jobId; @Column(name="LAST_NAME", nullable = false, length = 25) private String lastName; @Column(name="PHONE_NUMBER", length = 20) private String phoneNumber; private Double salary; @ManyToOne @JoinColumn(name = "MANAGER_ID") private Employee employee; @OneToMany(mappedBy = "employee") private List employeeList; public Employee() { } public Employee(Double commissionPct, Long departmentId, String email, Long employeeId, String firstName, Timestamp hireDate, String jobId, String lastName, Employee employee, String phoneNumber, Double salary) { this.commissionPct = commissionPct; this.departmentId = departmentId; this.email = email; this.employeeId = employeeId; this.firstName = firstName; this.hireDate = hireDate; this.jobId = jobId; this.lastName = lastName; this.employee = employee; this.phoneNumber = phoneNumber; this.salary = salary; } public Double getCommissionPct() { return commissionPct; } public void setCommissionPct(Double commissionPct) { this.commissionPct = commissionPct; } public Long getDepartmentId() { return departmentId; } public void setDepartmentId(Long departmentId) { this.departmentId = departmentId; } public String getEmail() { return email; } public void setEmail(String email) { this.email = email; } public Long getEmployeeId() { return employeeId; } public void setEmployeeId(Long employeeId) { this.employeeId = employeeId; } public String getFirstName() { return firstName; } public void setFirstName(String firstName) { this.firstName = firstName; } public Timestamp getHireDate() { return hireDate; } public void setHireDate(Timestamp hireDate) { this.hireDate = hireDate; } public String getJobId() { return jobId; } public void setJobId(String jobId) { this.jobId = jobId; } public String getLastName() { return lastName; } public void setLastName(String lastName) { this.lastName = lastName; } public String getPhoneNumber() { return phoneNumber; } public void setPhoneNumber(String phoneNumber) { this.phoneNumber = phoneNumber; } public Double getSalary() { return salary; } public void setSalary(Double salary) { this.salary = salary; } public Employee getEmployee() { return employee; } public void setEmployee(Employee employee) { this.employee = employee; } public List getEmployeeList() { return employeeList; } public void setEmployeeList(List employeeList) { this.employeeList = employeeList; } public Employee addEmployee(Employee employee) { getEmployeeList().add(employee); employee.setEmployee(this); return employee; } public Employee removeEmployee(Employee employee) { getEmployeeList().remove(employee); employee.setEmployee(null); return employee; } } JPA could be used in standalone applications and Java EE containers. In both worlds you normally create a Facade to retrieve or store the values of the Entities to or from the database. The Facade does this via an EntityManager which will be injected by the Java EE container. Here is sample Facade Session Bean for a Java EE container. package demo.proxy.ejb; import java.util.HashMap; import java.util.List; import javax.ejb.Local; import javax.ejb.Remote; import javax.ejb.Stateless; import javax.persistence.EntityManager; import javax.persistence.PersistenceContext; import javax.persistence.Query; import javax.interceptor.AroundInvoke; import javax.interceptor.InvocationContext; import oracle.jdbc.driver.OracleConnection; import org.eclipse.persistence.config.EntityManagerProperties; import org.eclipse.persistence.internal.jpa.EntityManagerImpl; @Stateless(name = "DataFacade", mappedName = "ProxyUser-TestEJB-DataFacade") @Remote @Local public class DataFacadeBean implements DataFacade, DataFacadeLocal { @PersistenceContext(unitName = "TestEJB") private EntityManager em; private String username; public Object queryByRange(String jpqlStmt, int firstResult, int maxResults) { // setSessionUser(); Query query = em.createQuery(jpqlStmt); if (firstResult 0) { query = query.setFirstResult(firstResult); } if (maxResults 0) { query = query.setMaxResults(maxResults); } return query.getResultList(); } public Employee persistEmployee(Employee employee) { // setSessionUser(); em.persist(employee); return employee; } public Employee mergeEmployee(Employee employee) { // setSessionUser(); return em.merge(employee); } public void removeEmployee(Employee employee) { // setSessionUser(); employee = em.find(Employee.class, employee.getEmployeeId()); em.remove(employee); } /** select o from Employee o */ public List getEmployeeFindAll() { Query q = em.createNamedQuery("Employee.findAll"); return q.getResultList(); } Putting Both Together To use Proxy Authentication with JPA and within a Java EE container you have to take care of the additional requirements: Use an OCI JDBC driver Provide the user name that connects through the proxy user Use an OCI JDBC driver To use the OCI JDBC driver you need to set up your JDBC data source file to use the correct JDBC URL. hr jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521))(CONNECT_DATA=(SID=XE))) oracle.jdbc.OracleDriver user app_user 62C32F70E98297522AD97E15439FAC0E SQL SELECT 1 FROM DUAL jdbc/hrDS Application Additionally you need to make sure that the version of the shared libraries of the OCI driver match the version of the JDBC driver in your Java EE container or Java application and are within your PATH (on Windows) or LD_LIBRARY_PATH (on most Unix-based systems). Installing the Oracle Database Instance Client software works perfectly. Provide the user name that connects through the proxy user This part needs some modification of your application software and session facade. Session Facade Changes In the Session Facade we must ensure that every call that goes through the EntityManager must be prepared correctly and uniquely assigned to this session. The second is really important, as the EntityManager works with a connection pool and can not guarantee that we set the proxy user on the connection that will be used for the database activities. To avoid changing every method call of the Session Facade we provide a method to set the username of the user that connects through the proxy user. This method needs to be called by the Facade client bfore doing anything else. public void setUsername(String name) { username = name; } Next we provide a means to instruct the TopLink EntityManager Delegate to use Oracle Proxy Authentication. (I love small helper methods to hide the nitty-gritty details and avoid repeating myself.) private void setSessionUser() { setSessionUser(username); } private void setSessionUser(String user) { if (user != null && !user.isEmpty()) { EntityManagerImpl emDelegate = ((EntityManagerImpl)em.getDelegate()); emDelegate.setProperty(EntityManagerProperties.ORACLE_PROXY_TYPE, OracleConnection.PROXYTYPE_USER_NAME); emDelegate.setProperty(OracleConnection.PROXY_USER_NAME, user); emDelegate.setProperty(EntityManagerProperties.EXCLUSIVE_CONNECTION_MODE, "Always"); } } The final step is use the EJB 3.0 AroundInvoke interceptor. This interceptor will be called around every method invocation. We therefore check whether the Facade methods will be called or not. If so, we set the user for proxy authentication and the normal method flow continues. @AroundInvoke public Object proxyInterceptor(InvocationContext invocationCtx) throws Exception { if (invocationCtx.getTarget() instanceof DataFacadeBean) { setSessionUser(); } return invocationCtx.proceed(); } Benefits Using Oracle Proxy Authentification has a number of additional benefits appart from implementing the role model of your application: Fine grained access control for temporary users of the account, without compromising the original password. Enabling database auditing and logging. Better identification of performance bottlenecks. References Effective Oracle Database 10g Security by Design, David Knox TopLink Developer's Guide, Chapter 98

  Read the article

• Dual booting on separate hard drives

  - by tornadorider

  I have windows XP professional installed on 1 hard drive and Ubuntu 10.10 on my second hard drive. On start up the computer completely skips the grub menu and boots straight into 10.10. I have tried running os-prober with the windows hard drive mounted and then updating grub but it didnt work. Any ideas? I have changed the boot order so that the HDD with xp on it is first however the computer still booted into linux. I tried running grub-install /dev/sda and got this /usr/sbin/grub-setup: warn: Sector 32 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.. /usr/sbin/grub-setup: warn: Sector 33 is already in use by FlexNet; avoiding it. This software may cause boot or other problems in future. Please ask its authors not to store data in the boot track.. Installation finished. No error reported I checked using disk utility and the code for my xp hard drive is sdb so i ran the camand grub-install /dev/sdb shich gave me this Installation finished. No error reported. So i rebooted but it still didnt work. Any other ideas? Additional info gedit /boot/grub/grub.cfg: # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### sudo fdisk -l: Disk /dev/sda: 80.1 GB, 80060424192 bytes 255 heads, 63 sectors/track, 9733 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0008a483 Device Boot Start End Blocks Id System /dev/sda1 * 1 9352 75112448 83 Linux /dev/sda2 9352 9734 3068929 5 Extended /dev/sda5 9352 9734 3068928 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc5d6c5d6 Device Boot Start End Blocks Id System /dev/sdb1 1 60800 488375968+ 7 HPFS/NTFS sudo blkid /dev/sda1: UUID="d682c9bd-dd89-4827-9802-a1f921ebe21c" TYPE="ext4" /dev/sda5: UUID="09e9c2cb-d903-4f0b-a181-536951845231" TYPE="swap" /dev/sdb1: UUID="B21844EB1844AFE1" TYPE="ntfs" sudo os-prober (nothing) Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for (,msdos1)/boot/grub. => Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in partition #1 for (,msdos1)/boot/grub. sda1: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 10.10 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda2: _________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: sdb1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows XP Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files/dirs: =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 80.1 GB, 80060424192 bytes 255 heads, 63 sectors/track, 9733 cylinders, total 156368016 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 2,048 150,226,943 150,224,896 83 Linux /dev/sda2 150,228,990 156,366,847 6,137,858 5 Extended /dev/sda5 150,228,992 156,366,847 6,137,856 82 Linux swap / Solaris Drive: sdb ___________________ _____________________________________________________ Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdb1 * 63 976,751,999 976,751,937 7 HPFS/NTFS blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/sda1 d682c9bd-dd89-4827-9802-a1f921ebe21c ext4 /dev/sda2: PTTYPE="dos" /dev/sda5 09e9c2cb-d903-4f0b-a181-536951845231 swap /dev/sda: PTTYPE="dos" /dev/sdb1 B21844EB1844AFE1 ntfs /dev/sdb: PTTYPE="dos" ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sda1 / ext4 (rw,errors=remount-ro,commit=0) =========================== sda1/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga } insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c set locale_dir=($root)/boot/grub/locale set lang=en insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### menuentry 'Ubuntu, with Linux 2.6.35-28-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-28-generic ...' linux /boot/vmlinuz-2.6.35-28-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-28-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro quiet splash initrd /boot/initrd.img-2.6.35-22-generic } menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c echo 'Loading Linux 2.6.35-22-generic ...' linux /boot/vmlinuz-2.6.35-22-generic root=UUID=d682c9bd-dd89-4827-9802-a1f921ebe21c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.35-22-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set d682c9bd-dd89-4827-9802-a1f921ebe21c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. menuentry "Windows XP" { set root=(hd1,1) chainloader (hd1,1)+1 } ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sda1/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/sda1 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=09e9c2cb-d903-4f0b-a181-536951845231 none swap sw 0 0 =================== sda1: Location of files loaded by Grub: =================== 51.7GB: boot/grub/core.img 58.5GB: boot/grub/grub.cfg 1.2GB: boot/initrd.img-2.6.35-22-generic 1.3GB: boot/initrd.img-2.6.35-28-generic 58.2GB: boot/vmlinuz-2.6.35-22-generic 51.7GB: boot/vmlinuz-2.6.35-28-generic 1.3GB: initrd.img 1.2GB: initrd.img.old 51.7GB: vmlinuz 58.2GB: vmlinuz.old =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on sda2 00000000 d9 ed 13 ab ff a8 33 8c 01 b2 47 99 e1 4a b1 f1 |......3...G..J..| 00000010 69 5f a7 29 a4 1a 03 9e 31 b9 45 02 71 e6 58 78 |i_.)....1.E.q.Xx| 00000020 3d f6 ee 7b 3e 33 1b 82 c6 7d cf 1a c8 e7 bc 2f |=..{>3...}...../| 00000030 b9 e1 70 75 cf 18 aa e7 d5 7e 3c f1 b4 e7 9e 3a |..pu.....~<....:| 00000040 55 38 f1 b4 ee 78 59 0b 5e f7 3c 4c 57 73 9c 2a |U8...xY.^.<LWs.*| 00000050 28 f1 19 ed 11 9c b2 19 e2 80 92 1c 7b 84 ee 0b |(...........{...| 00000060 e2 c0 ac af 0a 50 42 b9 cf 0c dc 2c 20 77 85 dc |.....PB...., w..| 00000070 8f 70 5f 7b 84 9b a1 f7 8c 2d ee 70 5c ae f7 39 |.p_{.....-.p\..9| 00000080 63 f7 09 8a ec 79 4c ed 9f cc ad 3c f8 1b 47 7d |c....yL....<..G}| 00000090 3f 97 d5 16 cb 29 45 38 25 61 36 08 de 10 93 0f |?....)E8%a6.....| 000000a0 95 4f ea 54 f9 89 ff f1 bf 9a cc bb fd b6 22 b1 |.O.T..........".| 000000b0 65 08 05 21 78 19 46 b0 24 7e fb de d4 b3 ba d6 |e..!x.F.$~......| 000000c0 ec 11 65 82 ee 10 1d 12 04 91 da 6d 67 47 ea 9b |..e........mgG..| 000000d0 6f b0 aa fb cb 67 10 64 86 e8 26 85 fb f9 50 77 |o....g.d..&...Pw| 000000e0 9d 13 9b 9e d9 11 f3 a1 50 1b 11 b7 93 79 9f ab |........P....y..| 000000f0 c1 b6 86 0f 35 ed d4 9f dc f8 db bd ed 45 3a 68 |....5........E:h| 00000100 54 68 4a 1d d1 fc b8 c9 72 b4 d7 7b 60 e7 39 2f |ThJ.....r..{`.9/| 00000110 2a 0a 4e 52 72 52 c6 e2 2a 55 6a 2a e1 82 40 71 |*.NRrR..*Uj*..@q| 00000120 11 11 e0 53 d6 ff 1b a9 c6 65 df 1e b7 15 6f a2 |...S.....e....o.| 00000130 15 02 a4 6d 19 b7 78 57 a6 ee 9e 36 08 7d 6f 7c |...m..xW...6.}o|| 00000140 fd f7 7c d5 40 ff 0f c7 97 dc aa 00 ce 8b bb dc |..|.@...........| 00000150 e2 eb 1c 50 74 d8 14 cc 9a d6 5c a2 ab f2 67 f9 |...Pt.....\...g.| 00000160 58 ed 43 79 0e 78 7a 5c a6 f8 7b e8 05 4e 62 8a |X.Cy.xz\..{..Nb.| 00000170 0a 5f 22 ee a6 38 b9 e1 32 45 97 08 cc 75 66 c6 |._"..8..2E...uf.| 00000180 b3 a2 2d 89 a1 e9 95 21 28 53 fd dd be b1 b2 a2 |..-....!(S......| 00000190 78 3f a3 c9 3d e3 31 54 88 cf 78 0d e1 21 a8 74 |x?..=.1T..x..!.t| 000001a0 06 60 9d 21 c6 7a 24 e1 cc 28 f8 98 e0 99 e3 fc |.`.!.z$..(......| 000001b0 fa 8b eb d5 56 03 20 b8 54 ba c6 ee 9f 57 00 fe |....V. .T....W..| 000001c0 ff ff 82 fe ff ff 02 00 00 00 00 a8 5d 00 00 00 |............]...| 000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200

  Read the article

• Stop Spinning Your Wheels&hellip; Sage Advice for Aspiring Developers

  - by Mark Rackley

  So… lately I’ve been tasked with helping bring some non-developers over the hump and become full-fledged, all around, SharePoint developers. Well, only time will tell if I’m successful or a complete failure. Good thing about failures though, you know what NOT to do next time! Anyway, I’ve been writing some sort of code since I was about 10 years old; so I sometimes take for granted the effort some people have to go through to learn a new technology. I guess if I had to say I was an “expert” in one thing it would be learning (and getting “stuff” done) in new technologies. Maybe that’s why I’ve embraced SharePoint and the SharePoint community. SharePoint is the first technology I haven’t been able to master or get everything done without help from other people. I KNOW I’ll never know it all and I learn something new every day.  It keeps it interesting, it keeps me motivated, and keeps me involved. So, what some people may consider a downside of SharePoint, I definitely consider a plus. Crap.. I’m rambling. Where was I? Oh yeah… me trying to be helpful. Like I said, I am able to quickly and effectively pick up new languages, technology, etc. and put it to good use. Am I just brilliant? Well, my mom thinks so.. but maybe not. Maybe I’ve just been doing it for a long time…. 25 years in some form or fashion… wow I’m old… Anyway, what I lack in depth I make up for in breadth and being the “go-to” guy wherever I work when someone needs to “get stuff done”.  Let’s see if I can take some of that experience and put it to practical use to help new people get up to speed faster, learn things more effectively, and become that go-to guy. First off…  make sure you… Know The Basics I don’t have the time to teach new developers the basics, but you gotta know them. I’ve only been “taught” two languages.. Fortran 77 and C… everything else I’ve picked up from “doing”. I HAD to know the basics though, and all new developers need to understand the very basics of development.  97.23% of all languages will have the following: Variables Functions Arrays If statements For loops / While loops If you think about it, most development is “if this, do this… or while this, do this…”.  “This” may be some unique method to your language or something you develop, but the basics are the basics. YES there are MANY other development topics you need to understand, but you shouldn’t be scratching your head trying to figure out what a ”for loop” is… (Also learn about classes and hashtables as quickly as possible). Once you have the basics down it makes it much easier to… Learn By Doing This may just apply to me and my warped brain.  I don’t learn a new technology by reading or hearing someone speak about it. I learn by doing. It does me no good to try and learn all of the intricacies of a new language or technology inside-and-out before getting my hands dirty. Just show me how to do one thing… let me get that working… then show me how to do the next thing.. let me get that working… Now, let’s see what I can figure out on my own. Okay.. now it starts to make sense. I see how the language works, I can step through the code, and before you know it.. I’m productive in a new technology. Be careful here though…. make sure you… Don’t Reinvent The Wheel People have been writing code for what… 50+ years now? So, why are you trying to tackle ANYTHING without first Googling it with Bing to see what others have done first? When I was first learning C# (I had come from a Java background) I had to call a web service.  Sure! No problem! I’d done this many times in Java. So, I proceeded to write an HTTP Handler, called the Web Service and it worked like a charm!!!  Probably about 2.3 seconds after I got it working completely someone says to me “Why didn’t you just add a Web Reference?” Really? You can do that?  oops… I just wasted a lot of time. Before undertaking the development of any sort of utility method in a new language, make sure it’s not already handled for you… Okay… you are starting to write some code and are curious about the possibilities? Well… don’t just sit there… Try It And See What Happens This is actually one of my biggest pet peeves. “So… ‘x++’ works in C#, but does it also work in JavaScript?”   Really? Did you just ask me that? In the time it spent for you to type that email, press the send button, me receive the email, get around to reading it, and replying with “yes” you could have tested it 47 times and know the answer! Just TRY it! See what happens! You aren’t doing brain surgery. You aren’t going to kill anyone, and you BETTER not be developing in production. So, you are not going to crash any production systems!! Seriously! Get off your butt and just try it yourself. The extra added benefit is that it doesn’t work, the absolute best way to learn is to… Learn From Your Failures I don’t know about you… but if I screw up and something doesn’t work, I learn A LOT more debugging my problem than if everything magically worked. It’s okay that you aren’t perfect! Not everyone can be me? In the same vein… don’t ask someone else to debug your problem until you have made a valiant attempt to do so yourself. There’s nothing quite like stepping through code line by line to see what it’s REALLY doing… and you’ll never feel more stupid sometimes than when you realize WHY it’s not working.. but you realize... you learn... and you remember. There is nothing wrong with failure as long as you learn from it. As you start writing more and more and more code make sure that you ALWAYS… Develop for Production You will soon learn that the “prototype” you wrote last week to show as a “proof of concept” is going to go directly into production no matter how much you beg and plead and try to explain it’s not ready to go into production… it’s going to go straight there.. and it’s like herpes.. it doesn’t go away and there’s no fixing it once it’s in there.  So, why not write ALL your code like it will be put in production? It MIGHT take a little longer, but in the long run it will be easier to maintain, get help on, and you won’t be embarrassed that it’s sitting on a production server for everyone to use and see. So, now that you are getting comfortable and writing code for production it is important to to remember the… KISS Principle… Learn It… Love It… Keep It Simple Stupid Seriously.. don’t try to show how smart you are by writing the most complicated code in history. Break your problem up into discrete steps and write each step. If it turns out you have some redundancy, you can always go back and tweak your code later.  How bad is it when you write code that LOOKS cocky? I’ve seen it before… some of the most abstract and complicated classes when a class wasn’t even needed! Or the most elaborate unreadable code jammed into one really long line when it could have been written in three lines, performed just as well, and been SOOO much easier to maintain. Keep it clear and simple.. baby steps people. This will help you learn the technology, debug problems, AND it will help others help you find your problems if they don’t have to decipher the Dead Sea Scrolls just to figure out what you are trying to do…. Really.. don’t be that guy… try to curb your ego and… Keep an Open Mind No matter how smart you are… how fast you type… or how much you get paid, don’t let your ego get in the way. There is probably a better way to do everything you’ve ever done. Don’t become so cocky that you can’t think someone knows more than you. There’s a lot of brilliant, helpful people out there willing to show you tricks if you just give them a chance. A very super-awesome developer once told me “So what if you’ve been writing code for 10 years or more! Does your code look basically the same? Are you not growing as a developer?” Those 10 years become pretty meaningless if you just “know” that you are right and have not picked up new tips, tricks, methods, and patterns along the way. Learn from others and find out what’s new in development land (you know you don’t have to specifically use pointers anymore??). Along those same lines… If it’s not working, first assume you are doing something wrong. You have no idea how much it annoys people who are trying to help you when you first assume that the help they are trying to give you is wrong. Just MAYBE… you… the person learning is making some small mistake? Maybe you didn’t describe your problem correctly? Maybe you are using the wrong terminology? “I did exactly what you said and it didn’t work.”  Oh really? Are you SURE about that? “Your solution doesn’t work.”  Well… I’m pretty sure it works, I’ve used it 200 times… What are you doing differently? First try some humility and appreciation.. it will go much further, especially when it turns out YOU are the one that is wrong. When all else fails…. Try Professional Training Some people just don’t have the mindset to go and figure stuff out. It’s a gift and not everyone has it. If everyone could do it I wouldn’t have a job and there wouldn’t be professional training available.  So, if you’ve tried everything else and no light bulbs are coming on, contact the experts who specialize in training. Be careful though, there is bad training out there. Want to know the names of some good places? Just shoot me a message and I’ll let you know. I’m boycotting endorsing Andrew Connell anymore until I get that free course dangit!! So… that’s it.. that’s all I got right now. Maybe you thought all of this is common sense, maybe you think I’m smoking crack. If so, don’t just sit there, there’s a comments section for a reason. Finally, what about you? What tips do you have to help this aspiring to learn the dark arts??

  Read the article

• URL Rewrite – Protocol (http/https) in the Action

  - by OWScott

  IIS URL Rewrite supports server variables for pretty much every part of the URL and http header. However, there is one commonly used server variable that isn’t readily available.  That’s the protocol—HTTP or HTTPS. You can easily check if a page request uses HTTP or HTTPS, but that only works in the conditions part of the rule.  There isn’t a variable available to dynamically set the protocol in the action part of the rule.  What I wish is that there would be a variable like {HTTP_PROTOCOL} which would have a value of ‘HTTP’ or ‘HTTPS’.  There is a server variable called {HTTPS}, but the values of ‘on’ and ‘off’ aren’t practical in the action.  You can also use {SERVER_PORT} or {SERVER_PORT_SECURE}, but again, they aren’t useful in the action. Let me illustrate.  The following rule will redirect traffic for http(s)://localtest.me/ to http://www.localtest.me/. <rule name="Redirect to www"> <match url="(.*)" /> <conditions> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> </conditions> <action type="Redirect" url="http://www.localtest.me/{R:1}" /> </rule> The problem is that it forces the request to HTTP even if the original request was for HTTPS. Interestingly enough, I planned to blog about this topic this week when I noticed in my twitter feed yesterday that Jeff Graves, a former colleague of mine, just wrote an excellent blog post about this very topic.  He beat me to the punch by just a couple days.  However, I figured I would still write my blog post on this topic.  While his solution is a excellent one, I personally handle this another way most of the time.  Plus, it’s a commonly asked question that isn’t documented well enough on the web yet, so having another article on the web won’t hurt. I can think of four different ways to handle this, and depending on your situation you may lean towards any of the four.  Don’t let the choices overwhelm you though.  Let’s keep it simple, Option 1 is what I use most of the time, Option 2 is what Jeff proposed and is the safest option, and Option 3 and Option 4 need only be considered if you have a more unique situation.  All four options will work for most situations. Option 1 – CACHE_URL, single rule There is a server variable that has the protocol in it; {CACHE_URL}.  This server variable contains the entire URL string (e.g. http://www.localtest.me:80/info.aspx?id=5)  All we need to do is extract the HTTP or HTTPS and we’ll be set. This tends to be my preferred way to handle this situation. Indeed, Jeff did briefly mention this in his blog post: … you could use a condition on the CACHE_URL variable and a back reference in the rewritten URL. The problem there is that you then need to match all of the conditions which could be a problem if your rule depends on a logical “or” match for conditions. Thus the problem.  If you have multiple conditions set to “Match Any” rather than “Match All” then this option won’t work.  However, I find that 95% of all rules that I write use “Match All” and therefore, being the lazy administrator that I am I like this simple solution that only requires adding a single condition to a rule.  The caveat is that if you use “Match Any” then you must consider one of the next two options. Enough with the preamble.  Here’s how it works.  Add a condition that checks for {CACHE_URL} with a pattern of “^(.+)://” like so: How you have a back-reference to the part before the ://, which is our treasured HTTP or HTTPS.  In URL Rewrite 2.0 or greater you can check the “Track capture groups across conditions”, make that condition the first condition, and you have yourself a back-reference of {C:1}. The “Redirect to www” example with support for maintaining the protocol, will become: <rule name="Redirect to www" stopProcessing="true"> <match url="(.*)" /> <conditions trackAllCaptures="true"> <add input="{CACHE_URL}" pattern="^(.+)://" /> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> </conditions> <action type="Redirect" url="{C:1}://www.localtest.me/{R:1}" /> </rule> It’s not as easy as it would be if Microsoft gave us a built-in {HTTP_PROTOCOL} variable, but it’s pretty close. I also like this option since I often create rule examples for other people and this type of rule is portable since it’s self-contained within a single rule. Option 2 – Using a Rewrite Map For a safer rule that works for both “Match Any” and “Match All” situations, you can use the Rewrite Map solution that Jeff proposed.  It’s a perfectly good solution with the only drawback being the ever so slight extra effort to set it up since you need to create a rewrite map before you create the rule.  In other words, if you choose to use this as your sole method of handling the protocol, you’ll be safe. After you create a Rewrite Map called MapProtocol, you can use “{MapProtocol:{HTTPS}}” for the protocol within any rule action.  Following is an example using a Rewrite Map. <rewrite> <rules> <rule name="Redirect to www" stopProcessing="true"> <match url="(.*)" /> <conditions trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> </conditions> <action type="Redirect" url="{MapProtocol:{HTTPS}}://www.localtest.me/{R:1}" /> </rule> </rules> <rewriteMaps> <rewriteMap name="MapProtocol"> <add key="on" value="https" /> <add key="off" value="http" /> </rewriteMap> </rewriteMaps> </rewrite> Option 3 – CACHE_URL, Multi-rule If you have many rules that will use the protocol, you can create your own server variable which can be used in subsequent rules. This option is no easier to set up than Option 2 above, but you can use it if you prefer the easier to remember syntax of {HTTP_PROTOCOL} vs. {MapProtocol:{HTTPS}}. The potential issue with this rule is that if you don’t have access to the server level (e.g. in a shared environment) then you cannot set server variables without permission. First, create a rule and place it at the top of the set of rules.  You can create this at the server, site or subfolder level.  However, if you create it at the site or subfolder level then the HTTP_PROTOCOL server variable needs to be approved at the server level.  This can be achieved in IIS Manager by navigating to URL Rewrite at the server level, clicking on “View Server Variables” from the Actions pane, and added HTTP_PROTOCOL. If you create the rule at the server level then this step is not necessary.  Following is an example of the first rule to create the HTTP_PROTOCOL and then a rule that uses it.  The Create HTTP_PROTOCOL rule only needs to be created once on the server. <rule name="Create HTTP_PROTOCOL"> <match url=".*" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{CACHE_URL}" pattern="^(.+)://" /> </conditions> <serverVariables> <set name="HTTP_PROTOCOL" value="{C:1}" /> </serverVariables> <action type="None" /> </rule>   <rule name="Redirect to www" stopProcessing="true"> <match url="(.*)" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> </conditions> <action type="Redirect" url="{HTTP_PROTOCOL}://www.localtest.me/{R:1}" /> </rule> Option 4 – Multi-rule Just to be complete I’ll include an example of how to achieve the same thing with multiple rules. I don’t see any reason to use it over the previous examples, but I’ll include an example anyway.  Note that it will only work with the “Match All” setting for the conditions. <rule name="Redirect to www - http" stopProcessing="true"> <match url="(.*)" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> <add input="{HTTPS}" pattern="off" /> </conditions> <action type="Redirect" url="http://www.localtest.me/{R:1}" /> </rule> <rule name="Redirect to www - https" stopProcessing="true"> <match url="(.*)" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{HTTP_HOST}" pattern="^localtest\.me$" /> <add input="{HTTPS}" pattern="on" /> </conditions> <action type="Redirect" url="https://www.localtest.me/{R:1}" /> </rule> Conclusion Above are four working examples of methods to call the protocol (HTTP or HTTPS) from the action of a URL Rewrite rule.  You can use whichever method you most prefer.  I’ve listed them in the order that I favor them, although I could see some people preferring Option 2 as their first choice.  In any of the cases, hopefully you can use this as a reference for when you need to use the protocol in the rule’s action when writing your URL Rewrite rules. Further information: Viewing all Server Variable for a site. URL Parts available to URL Rewrite Rules Further URL Rewrite articles

  Read the article

• When I shutdown the computer, it restarts

  - by Prabu

  I am unable to shutdown. Whenever I try to shutdown, it reboots. I am running Ubuntu 12.10. I have run the boot-repair and this is the result: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for (,msdos1)/boot/grub. sda1: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.10 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/i386-pc/core.img sda2: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 1,936,809,983 1,936,807,936 83 Linux /dev/sda2 1,936,812,030 1,953,523,711 16,711,682 5 Extended /dev/sda5 1,936,812,032 1,953,523,711 16,711,680 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 229a5484-7659-4ce1-98ce-2f05f61a1ffa ext4 /dev/sda5 6c6dca25-ab67-4de4-8602-26fdb6154781 swap /dev/sr0 iso9660 Ubuntu 12.10 amd64 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda1/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=auto load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff initrd /boot/initrd.img-3.5.0-19-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { menuentry 'Ubuntu, with Linux 3.5.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda1/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=6c6dca25-ab67-4de4-8602-26fdb6154781 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 200.155235291 = 214.915047424 boot/grub/grub.cfg 1 40.280788422 = 43.251167232 boot/initrd.img-3.5.0-17-generic 1 2.468288422 = 2.650304512 boot/initrd.img-3.5.0-19-generic 1 200.149234772 = 214.908604416 boot/vmlinuz-3.5.0-17-generic 1 1.990135193 = 2.136891392 boot/vmlinuz-3.5.0-19-generic 1 2.468288422 = 2.650304512 initrd.img 1 1.990135193 = 2.136891392 vmlinuz 1 1.990135193 = 2.136891392 vmlinuz.old 1 =============================== StdErr Messages: =============================== cat: write error: Broken pipe File descriptor 8 (/proc/6297/mounts) leaked on lvscan invocation. Parent PID 13390: bash No volume groups found ADDITIONAL INFORMATION : =================== log of boot-repair 2012-12-17__01h53 =================== boot-repair version : 3.197~ppa1~quantal boot-sav version : 3.197~ppa1~quantal glade2script version : 3.2.2~ppa45~quantal boot-sav-extra version : 3.197~ppa1~quantal boot-repair is executed in live-session (Ubuntu 12.10, quantal, Ubuntu, x86_64) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity =================== os-prober: /dev/sda1:Ubuntu 12.10 (12.10):Ubuntu:linux =================== blkid: /dev/loop0: TYPE="squashfs" /dev/sr0: LABEL="Ubuntu 12.10 amd64" TYPE="iso9660" /dev/sda1: UUID="229a5484-7659-4ce1-98ce-2f05f61a1ffa" TYPE="ext4" /dev/sda5: UUID="6c6dca25-ab67-4de4-8602-26fdb6154781" TYPE="swap" 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== sda1/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=force" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== sda1/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Oct 17 14:59 grub.d total 72 -rwxr-xr-x 1 root root 7541 Oct 14 17:36 00_header -rwxr-xr-x 1 root root 5488 Oct 4 09:30 05_debian_theme -rwxr-xr-x 1 root root 10891 Oct 14 17:36 10_linux -rwxr-xr-x 1 root root 10258 Oct 14 17:36 20_linux_xen -rwxr-xr-x 1 root root 1688 Oct 11 14:10 20_memtest86+ -rwxr-xr-x 1 root root 10976 Oct 14 17:36 30_os-prober -rwxr-xr-x 1 root root 1426 Oct 14 17:36 30_uefi-firmware -rwxr-xr-x 1 root root 214 Oct 14 17:36 40_custom -rwxr-xr-x 1 root root 216 Oct 14 17:36 41_custom -rw-r--r-- 1 root root 483 Oct 14 17:36 README =================== UEFI/Legacy mode: This live-session is not in EFI-mode. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes =================== parted -l: Model: ATA ST1000DM003-1CH1 (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 992GB 992GB primary ext4 boot 2 992GB 1000GB 8556MB extended 5 992GB 1000GB 8556MB logical linux-swap(v1) Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== parted -lm: BYT; /dev/sda:1000GB:scsi:512:4096:msdos:ATA ST1000DM003-1CH1; 1:1049kB:992GB:992GB:ext4::boot; 2:992GB:1000GB:8556MB:::; 5:992GB:1000GB:8556MB:linux-swap(v1)::; Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) gvfsd-fuse on /run/user/ubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu) /dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usb vga_arbiter vhost-net zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 3.9G 100M 3.8G 3% / udev devtmpfs 3.9G 12K 3.9G 1% /dev tmpfs tmpfs 1.6G 864K 1.6G 1% /run /dev/sr0 iso9660 763M 763M 0 100% /cdrom /dev/loop0 squashfs 717M 717M 0 100% /rofs tmpfs tmpfs 3.9G 32K 3.9G 1% /tmp none tmpfs 5.0M 4.0K 5.0M 1% /run/lock none tmpfs 3.9G 176K 3.9G 1% /run/shm none tmpfs 100M 52K 100M 1% /run/user /dev/sda1 ext4 910G 26G 838G 3% /mnt/boot-sav/sda1 =================== fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000da1e9 Device Boot Start End Blocks Id System /dev/sda1 * 2048 1936809983 968403968 83 Linux /dev/sda2 1936812030 1953523711 8355841 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 1936812032 1953523711 8355840 82 Linux swap / Solaris Partition outside the disk detected. =================== Recommended repair Recommended-Repair This setting will reinstall the grub2 of sda1 into the MBR of sda. Additional repair will be performed: unhide-bootmenu-10s Unhide GRUB boot menu in sda1/etc/default/grub grub-install (GRUB) 2.00-7ubuntu11,grub-install (GRUB) 2. Reinstall the GRUB of sda1 into the MBR of sda Installation finished. No error reported. grub-install /dev/sda: exit code of grub-install /dev/sda:0 chroot /mnt/boot-sav/sda1 update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.5.0-19-generic Found initrd image: /boot/initrd.img-3.5.0-19-generic Found linux image: /boot/vmlinuz-3.5.0-17-generic Found initrd image: /boot/initrd.img-3.5.0-17-generic Found memtest86+ image: /boot/memtest86+.bin Unhide GRUB boot menu in sda1/boot/grub/grub.cfg Boot successfully repaired. You can now reboot your computer.

  Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186  | Next Page >