Search Results

Search found 7447 results on 298 pages for 'estrategia hardware'.

Page 182/298 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

• Windows Disk I/O Analysis

  - by Jonathon

  It appears that we are having a problem with the disk i/o speed on our Windows 2003 Enterprise Edition server (64-bit). As we were initializing a database that created two 1G tablespaces on 3 different machines, it became obvious that the two smaller machines (each 32-bit Windows 2003 Standard Edition with less RAM) killed the larger machine when creating the files. The larger machine took 10x as long to create the tablespaces than did the other machines. Now, I am left wondering how that could be. What programs or scripts would you guys recommend for tracking down the I/O problem? I think the issue may be with the controller card (all boxes are hardware RAID 10, but have different controller cards), but I would like to check the actual disk I/O speed as well, so I have some hard numbers to work with. Any help would be appreciated.

  Read the article

• Are speakers wasting power when they are not in use?

  - by Dennis Cheung

  I guess all of you have a pair/set of speakers for your MP3s. I am just interesting to how do they do when they are not playing? How actually the power spent by the speaker? Does any the below cases matter? Idle / Silence input When you computer is off / not connected Raise the volume by hardware (turn/push the button on the speaker) Raise the volume by software (do it with your mouse) BTW, to save the world. I am here to suggest you to unplug it when you leave your PC.

  Read the article

• Configuring NAT and static IP on Cisco 877W

  - by David M Williams

  Hi all, I'm having trouble setting up a static IP reservation on a network. What I want to do is assign IP 192.168.1.105 to MAC address 00:21:5d:2f:58:04 and then port forward 35394 to it. If it helps, output from show ver says Cisco IOS software, C870 software (C870-ADVSECURITYK9-M), version 12.4(4)T7, release software (fc1) ROM: System bootstrap, version 12.3(8r)YI4, release software I have done this - service dhcp ip routing ip dhcp excluded-address 192.168.1.1 192.168.1.99 ip dhcp excluded-address 192.168.1.200 192.168.1.255 ip dhcp pool ClientDHCP network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 192.168.1.1 lease 7 ip dhcp pool NEO host 192.168.1.105 255.255.255.0 hardware-address 0021.5D2F.5804 ip nat inside source static tcp 192.168.1.105 35394 <PUBLIC_IP> 35394 extendable However, the machine is getting assigned IP address 192.168.1.101 not .105 ... any suggestions? Thanks !

  Read the article

• Recommended CPU upgrade for Dell Vostro 220 with Intel E7300 processor?

  - by Justin Grant

  I've got a Dell Vostro 220 with an E7300 processor (Intel Core 2 Duo @ 2.66Mhz, LGA775 socket) and I'm thinking about upgrading my processor so I can run Windows Server 2008 R2 with Hyper-V, which requires Hardware Virtualization support in the processor. Yes, I know this is underpowered for a server, I'm actually using it as a desktop machine but I'd like to use Hyper-V instead of Virtual Server (which I'm using now for running VMs). I'd like to keep the same motherboard and ideally the same CPU fan and RAM too. Any suggestions for a good, relatively cheap (under $200) processor upgrade?

  Read the article

• Non-Apple RAID card for Mac PRO (TOWER)

  - by Arthor

  I have the following: MAC PRO (Model Number: A1186) (PCIe - SLOTS) At present I am using the software RAID however I wish to move to the hardware raid because of the following: Performance (4 x 300gb SATA II in RAID 5) Redundancy (Raid 5, 1 drive can fail and system will be online) I do not wish to use the Apple RAID card (very expensive), I would like to use an aftermarket one which is cheaper. Questions: Does anyone have a WORKING aftermarket RAID card working in their MAC PRO (TOWER)? -(Have done some research, ROCKETRAID, need confirmation) If so to the above, does it work from boot? Thanks

  Read the article

• Nokia Pc Suite problems with bluetooth (win7)

  - by wurlog

  I have a new Nokia C5-00 and a HP 620. The Bluetoothdriver are installed and the windows Bluetoothstack finds the mobile. After installing Nokia PC Suite I am asked to choose a connection method. As I click on Bluetooth the Nokia PC Suite shows an error message: "Cannot use the connection type.Check that all the needd hardware,software and drivers are available. (Code: OpenMedia)" I tried to switch it on and off via the "wireless" key on the laptop. The HP Software for the button shows that the Bluetooth is deactivated and advices me to go to the device manager and activate the Bluetooth device. Strangely the Bluetooth symbol (I guess from the windows Bluetoothstack) pops up at the same time and I can use the Bluetooth in it's basic windows features, but still nokia suite won't work. ideas????

  Read the article

• Using "enterprise" switches in home network?

  - by Industrial

  Hi everyone, After more than 12 years working with computers, I am still way behind when it comes to networking, so please bear with me :) As of this Christmas, the number of computers in my home has increased and it's well about time to upgrade the current network hardware in order to offer LAN connection to all computers. Trying to find a cheap solution, A close friend offered me a great deal on a "enterprise-class" Switch from HP (more LAN ports than I would ever need), at the same price as what a brand new Netgear or D-link Switch with 6/8 ports would cost me in retail. Would it be common sense to get this one and start using it immediately and never again have to worry about running out of LAN connections, or am I taking on a bigger bite than what I could chew?

  Read the article

• How can I watch TV on my Computer (Not Online)?

  - by Sammy

  Novice question here, but how can I watch TV on my PC without using online sites? I have heard of tv tuners but is it just a matter of hooking a tv tuner to your computer and that's it? Do I have to just buy a tuner or pay for a service as well? If no service needs to be paid for, will I get just regular channels or cable/satellite channels as well? Will my PC need to be connected to the Internet when I want to watch TV? Do I need any type of software aside from the hardware tuner?

  Read the article

• Hot video card in server

  - by DougN

  Not sure if this belongs here or Superuser (I looked at Superuser -- suspect there are more hardware gurus here). I have a server that sits in a cabinet. It's connected to a small screen that is normally off. However, the video card is running at about 210 F all the time. The rest of the PC is pretty cool (getting temps from SpeedFan). Any thoughts on a way to quiet/calm/cool the video card since it's never really doing anything anyway? I'm usually logged out on the server, and no screen saver defined. Windows is already set to turn off the screen for power saving at 5 minutes.

  Read the article

• Hosting provider that allows you to host your own VM image?

  - by Timo Geusch

  I've already looked at the 'Best Hosted VM Provider' question and checked the recommendations there, but I seem to have slightly odd requirements. Basically, I am looking for a host that allows me to host a VM image I supply (FreeBSD, which most of the suggested hosters don't support, they only seem to support various Linuxes) instead of one of their standard images. I'm a long time BSD user and have had colo BSD servers in the past so I'm pretty sure that i don't need much in the way of software support, but I'd basically like to run my server on managed hardware without having to rent the whole server. For the usage I have that would way OTT as we're talking a couple of small apps with very few users, a couple of blogs and (most importantly) email hosting for about 6-10 domains with moderate traffic levels. Oh, and reliability trumps cost to a certain extent.

  Read the article

• msi netbook refuses to connect to home wireless network (windows xp)

  - by sa125

  Hi - I'm trying to connect my girlfriend's MSI netbook to the wireless network in my house, and failing repeatedly. It's not a hardware issue, b/c it connects to other networks successfully, and, it's not a network issue, because I have another mac and linux laptops that have no problem detecting and connecting to the same network. When I open windows' network connections box, I can see the network available, and when I try to connect to it (using a password), I get a "network no longer in range.." error (the router is 2 ft away). This has been the case for the past 6 months, and I'm about to give up. I've reset the router, erased all saved network preferences and pretty much all I could think of short of re-installing XP. Any idea what else could be done? thanks.

  Read the article

• Xen on bare metal, Mac OS X 10.6, Vista, Debian as guest OSes

  - by Mischa Arefiev

  I have: a desktop PC (Athlon 64, 2 cores) ...that came with Windows Vista, and a retail DVD of Mac OS X 10.6 I want: to install Mac OS X through Hackintosh (I believe my hardware is suitable), to also run Windows Vista with full 3D support for video games and Youtube, to also run Debian GNU/Linux with optional 3D for work. I don't think my CPU supports VT-x, but it should have AMD-V. So the question is: Can all of this be done with Xen (Xen on bare metal, all three OSes as guests)? Or should I just try to install OS X first and then run Vista and Debian in Parallels?

  Read the article

• MSI netbook refuses to connect to home wireless network with Windows XP

  - by sa125

  I'm trying to connect my girlfriend's MSI netbook to the wireless network in my house, and failing repeatedly. It's not a hardware issue, b/c it connects to other networks successfully, and, it's not a network issue, because I have another mac and linux laptops that have no problem detecting and connecting to the same network. When I open windows' network connections box, I can see the network available, and when I try to connect to it (using a password), I get a "network no longer in range.." error (the router is 2 ft away). This has been the case for the past 6 months, and I'm about to give up. I've reset the router, erased all saved network preferences and pretty much all I could think of short of re-installing XP. Any idea what else could be done? thanks.

  Read the article

• Virtualised Sharepoint Backup Strategies

  - by dunxd

  I have a Sharepoint (OSS 2007) farm running on three virtual machines in VMWare ESX, plus a SQL Server backend on physical hardware. During a recent Business Continuity Planning event I tried restoring the sharepoint farm with only the config and content databases, and failed to get things working. My plan was to build a new sharepoint server, then attach this to a restoration config database and install the Central Management site on this server, then reattach the content databases. This failed at the Central Management part of the plan. So I am back to the drawing board on the best strategy for backup and recovery, with reducing the time and complexity of the restore job the main objective. I haven't been able to find much in the way of discussion of backup/restore strategies for Sharepoint in a VMWare environment, so I figured I'd see if anyone on server fault has any ideas or experience.

  Read the article

• What is causing my newly built PC with Windows 7 to BSOD?

  - by Ben S

  I recently built my own PC from parts and installed Windows 7 and I have been getting BSODs with various different stop codes. The latest was 0x24, but I've also had 0xd1 and 0x1e. However, Windows does not let me know where the fault occurred, so I have no idea how to go about resolving this. I know the cause is likely a hardware driver, but I don't know which and cannot find information about how to use the minidumps to troubleshoot my problem. I've uploaded the last three minidumps in case someone can make sense out of them and let me know what could be causing my BSODs. Thanks, Ben

  Read the article

• Physically moving a hard drive from older iMac (c2d) to new iMac (i7) ?

  - by Inshim

  Instead of my usual habit of using superduper to mirror my drive to a new computer, I just physically moved the hard drive from an older iMac to a new one. But... it now doesn't boot, getting stuck at the apple logo screen. Since the hard drive that came with the new iMac works well, and my old drive works well when I return it to the older iMac, I conclude that there is some problem at the system/kernel level due to the different hardware. In the past I did similar things (e.g. starting a C2D machine from a Core Duo in target disk mode), so perhaps the change in architecture to the i5/i7 is too problematic? The main point: do you know of any way to get the system to rebuild for itself the proper versions of the system components when booting? Are there certain directories that I can safely delete to make that happen? Thanks

  Read the article

• How to clone and deploy multiple machines?

  - by Mimi

  Hi, See what I wanna do is basically make bootable clones or disc images or whatever(let's call it "stuff" for now ) and store many of them in a single big HDD. Then, I wanna use that big HDD and the "stuff" in it to be able to deploy new machines without the hassle of reinstalling Windows and whatnot(i.e. I do not want to restore nor simply clone a same machine, I literally want to use clones to save time during machine set up). Obviously I'd deploy the "stuff" onto an HDD going into a machine that I know the hardware of to avoid driver issues and whatnot. I alos have enough Windows keys to deal with the multiple activations. I tried using Acronis True Image but it doesn't seem to do what I want(unless idk how to use it properly). Any advice is welcome thanks :)

  Read the article

• What software can I use to pinpoint why Windows Server 2003 takes 15 seconds for any operation?

  - by Dr. Zim

  Ram is about 1/2 in use, four CPUs are all but idle. I tried "Microsoft Server Performance Advisor" with no luck. No entries in the Event Log for hardware failures, etc. And yet I can click on the start menu and wait 15 seconds for any new attempt. Launching software takes 30 seconds to respond. The server has an 8 drive WD RE 250 gig each Dell Perc 6 Sata raid array with Intel gigabit network cards. Anyone have any software titles that could analyze what is going wrong with this server?

  Read the article

• AHCI and Memtest86+

  - by satanicpuppy

  I've got a motherboard with SATA AHCI enabled, and I need to disable it to run Memtest86+ (because Window's built-in RAM diagnostic tool isn't worth a barrel of warm snot), and because the Memtest developers are too lazy to fix the bootloader problem. Fine, I know how to do that. The problem is, I, in a moment of insanity driven by the fact that I work with hardware RAID cards all the time, felt the need to enable the onboard RAID. In retrospect, this was stupid: the onboard raid is a joke, but I'm stuck with it. My question is, if I disable AHCI am I going to lose the RAID information? I haven't been able to find a definitive yes or no anywhere, and I'm not in the mood to find out the hard way.

  Read the article

• Remote Desktop not following display settings

  - by John

  I have my RDP client set up to use highest settings for connecting to another PC on my LAN, which has display settings 1280x1024x32bit. RDP is specifically set to use 32bit depth, but when I connect it drops to 16bit. The PC I connect to is (amongst other things) used to do some 3D graphics. I don't expect great performance, just to check it works... but it doesn't over RDP, the 3D app doesn't think the hardware is the same. Does RDP's integration with Windows mean it is providing some virtualised rendering system? Should I use something less 'clever' like VNC, to literally screen-grab the contents of the screen without altering the settings?

  Read the article

• Mouse settings/properties dialog box won't open in Windows 7

  - by ymasood

  Hi, I have a problem trying to open my computer's mouse settings by either going to the command prompt and typing, 'control mouse', 'main.cpl' (as researched online) or simply by trying to go to the Control Panel and clicking on 'Mouse' under Hardware and Sound section. I have also tried running cmd as Administrator and trying the above commands but that is of no help. Lastly, if I search for 'mouse' and click 'Mouse' from the Windows search bar, that doesn't work either. In the past I had bought and installed Microsoft Wireless Mobile Mouse 6000 software and have just now bought and installed HP's Wireless Comfort Mobile mouse. Any help in this regard is highly recommended. I won't be able to restore or reinstall my laptop since it's a heavy use machine. Thanks! Yasser

  Read the article

• Commercial version of Freenet6

  - by grnbeagle

  I've been using Freenet6 from gogoNET to make my mobile device publicly accessible via IPv6. It works quite well except that the service is not as stable because it's non-commercial usage only as their servers are hosted for free by different operators around the world. Apparently gogoNET sells hardware called gogoSERVER which allows one to build a service similar to Freenet6. I've inquired their sales team, but they were unable to tell me which companies have a commercial, production-quality implementation of Freenet6. Specifically I'm looking for the following features in IPv6 service provider: Client-based IPv6 connectivity for mobile devices: gogoCLIENT (gw6c) is ideal for mobile devices since it allows a device to go online regardless of the device's location. API for account maintenance: so that we can create device accounts from our software Static IPv6 address: (or maybe I mean IPv4 address) by this I mean, just like gogoNET6 service (username.broker.freenet6.net), we want to provide our users with a permanent URL for their device Any info on commercial IPv6 service provider utilizing gogoSERVER is appreciated. Thanks.

  Read the article

• Kernel config file generator

  - by lisak

  Hey guys, could please anybody recommend some kind of kconfig generator that would trim modules and built-in stuff that is not needed according to current hardware ? The best I have found is this : http://lkml.org/lkml/2008/9/16/290 I don't care about compilation time and the amount of modules that are not built-in. I'm concerned about performance. I don't know how much memory and runtime is wasted on huge kernels with almost everything possible. I'm a java developer and I don't know what most of the modules and drivers are for. So there is not much I can disable and be sure that I don't screw it up. Thanks in advance

  Read the article

• Load-balance with LAN and Wifi

  - by Synox

  I have a Mac, which runs Mac OSX 10.6 or Ubuntu 9.10 or Windows XP (Multiboot). Solution can be for any of the systems, whatever works better. I have two ISPs, one can be accessed via Wifi, one can be accessed via LAN. In OSX i can define the priority, which network to choose first. But what i wish to do is to load-balance with both networks. I don't want to buy extra hardware. I have some unused wifi routers if this would help. Compiling and configuring programms in linux is no problem for me. Thanks for any help.

  Read the article

• Stream music from Laptop to iPod Touch over Wi-Fi

  - by codeulike

  Rather than running a long cable from my Laptop to my stereo, I've been thinking for a while about getting one of those wireless devices that lets you transmit audio from your PC to a receiver plugged into the stereo. Then I realised I already have hardware that can potentially do this - I have an iPod Touch, and a Wi-Fi network in the house. So, is there some iPod Touch App that will let the iPod act as a Wi-Fi music receiver? And presumably, a corresponding piece of broadcast software for my (Windows Vista) Laptop?

  Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >