control theory - Page 183

how to apply image as background to the panel control.

- by karim

I would like to place one image to panel control in windows mobile application,but in properties to that control we have only backgroundcolor.what to do in this type of situation? I am using VS 2008,windows mobile 6 professional

Read the article

Is canvas security model ignoring access-control-allow-origin headers?

- by luklatlug

It seems that even if you set the access-control-allow-origin header to allow access from mydomain.org to an image hosted on domain example.org, the canvas' origin-clean flag gets set to false, and trying to manipulate that image's pixel data will trigger a security exception. Shouldn't canvas' obey the access-control-allow-origin header and allow access to image's data without throwing an exception?

Read the article

How could I click in a control and drag (not Drag and Drop) out of it but still follow the event as

- by Jelly Amma

Hello, I would like to allow the user to click within my UserControl and drag left/right to zoom in/out but I'd like the dragging not to be restricted to the actual control's boundaries. What sort of event or strategy would be the right way to track the mouse position outside the control and the form until the mouse click is released ? Thanks in advance for any help or advice.

Read the article

How to embed a user control (with a form) into SharePoint 2007?

- by Josh

I have a user control with a form, and I am trying to embed it in sharepoint 2007... I am getting an error about having two server-side forms on one page. This is crazy! Surely I can write a user control with a form and embed it in sharepoint?? Thanks.

Read the article

What speed are Wi-Fi management and control frames sent at?

- by Bryce Thomas

There are a bunch of different 802.11 Wi-Fi standards, e.g. 802.11a, 802.11b, 802.11g, 802.11n etc. that all support different speeds. Wi-Fi frames are generally categorised as one of the following: Data frames - carry the actual application data Control frames - coordinate when its safe to send/reduce collisions Management frames - handle connection discovery/setup/tear down (e.g. AP discovery, association, disassociation) My question is about whether all these frames, and specifically management frames, are transmitted at the fastest supported speed available, or whether certain classes of frames are transmitted at some lowest common denominator speed. I have noticed that when I put an 802.11b/g only device into monitor mode and capture traffic over the air, I still see management frames (e.g. association/disassociation) being transmitted between my phone and AP which are both 802.11n, even though 802.11n has a higher transfer rate. So I am imagining one of two possibilities: My 802.11n phone/AP had to negotiate a slower speed for some reason and that's why I can see their frames on my 802.11b/g monitoring device. Management frames (and perhaps control frames also?) are sent at a lower speed, and it's only data frames that are transmitted faster with newer 802.11 standards. The reason I would like to know which one of these two possibilities (or perhaps a third possibility) is the case is that I want to capture management frames, and need to know whether using an 802.11b/g card is going to lead to me missing some frames sent at higher speeds than the monitoring card can observe. If management frames are indeed sent at a slower rate, then it's all good. If I just happen to be seeing the management frames because my phone/AP have negotiated a slower rate though, then I need to reconsider what card I use for packet capture.

Read the article

How can I control which sound card Ubuntu uses for playback?

- by GorillaSandwich

I am dual-booting Ubuntu 9.04 and Windows XP but am new to Ubuntu. In Windows, I use an M-Audio Audiophile 2496 sound card for recording (because it has RCA input jacks for my mixer), but I don't use it for playback (because my speakers use a 1/8 inch jack); instead, I use the motherboard's built-in sound card. I tried to recreate this arrangement in Ubuntu, but despite selecting the built-in card for all playback under System > Preferences > Sound, I still have inconsistent results. Rhythmbox plays back through the integrated card, but Flash content in the browser and games in the OS send their audio to the Audiophile card. I have seen recommendations to use a program called "Jack" to control this, but I installed it and found it baffling. How can I control which card is used for playback, other than disabling one card (as I discovered how to do and explain below)? Also, is there a GUI for disabling hardware, or is it necessary to edit a configuration file?

Read the article

Static background noise while using new headset Ubuntu 13.04

- by ThundLayr

Today I bought a new gaming headset (Gx-Gaming Lychas), and when I tried to record some gameplay-comentary I noticed that there always is a static background noise, I just recorded an example so you guys can listen it (no downloaded needed): http://www47.zippyshare.com/v/65167832/file.html I'm using Kubuntu 13.04 and Kernel version is 3.8.0-19, my laptop is an Acer Travelmate 5760Z, I tried tons of configurations on Alsamixer and none of them made result, I really need to get this working so any kind of help will be very aprecciated. cat /proc/asound/cards: 0 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xc6400000 irq 44 cat /proc/asound/card0/codec#0 Codec: Conexant CX20588 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x14f1506c Subsystem Id: 0x10250574 Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 D3cold CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x4a 0x4a] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x80 0x80] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CX20588 Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x50 0x50] [0x80 0x80] [0x80 0x80] [0x80 0x80] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x17* 0x18 0x23 0x24 Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a 0x1b* 0x1d 0x1e Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 4 0x1a* 0x1b 0x1d 0x1e Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Control: name="Headphone Jack", index=0, device=0 Pincap 0x0000001c: OUT HP Detect Pin Default 0x04214040: [Jack] HP Out at Ext Right Conn = 1/8, Color = Green DefAssociation = 0x4, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400481: Stereo Control: name="Internal Mic Phantom Jack", index=0, device=0 Pincap 0x00001324: IN Detect Vref caps: HIZ 50 80 Pin Default 0x90a70130: [Fixed] Mic at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x400581: Stereo Control: name="Mic Jack", index=0, device=0 Pincap 0x00011334: IN OUT EAPD Detect Vref caps: HIZ 50 80 EAPD 0x0: Pin Default 0x04a19020: [Jack] Mic at Ext Right Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00010034: IN OUT EAPD Detect EAPD 0x0: Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1e [Pin Complex] wcaps 0x400481: Stereo Pincap 0x00000024: IN Detect Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x1f [Pin Complex] wcaps 0x400501: Stereo Control: name="Speaker Phantom Jack", index=0, device=0 Pincap 0x00000010: OUT Pin Default 0x92170110: [Fixed] Speaker at Int Front Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11* Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 1 0x21 Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Power states: D0 D1 D2 D3 D3cold EPSS Power: setting=D0, actual=D0 Connection: 2 0x10 0x11 Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono

Read the article

C#: Struct Constructor: "fields must be fully assigned before control is returned to the caller."

- by Rosarch

Here is a struct I am trying to write: public struct AttackTraits { public AttackTraits(double probability, int damage, float distance) { Probability = probability; Distance = distance; Damage = damage; } private double probability; public double Probability { get { return probability; } set { if (value > 1 || value < 0) { throw new ArgumentOutOfRangeException("Probability values must be in the range [0, 1]"); } probability = value; } } public int Damage { get; set; } public float Distance { get; set; } } This results in the following compilation errors: The 'this' object cannot be used before all of its fields are assigned to Field 'AttackTraits.probability' must be fully assigned before control is returned to the caller Backing field for automatically implemented property 'AttackTraits.Damage' must be fully assigned before control is returned to the caller. Consider calling the default constructor from a constructor initializer. Backing field for automatically implemented property 'AttackTraits.Distance' must be fully assigned before control is returned to the caller. Consider calling the default constructor from a constructor initializer. What am I doing wrong?

Read the article

Asp.Net membership via ASP.NET Website Administrator Tool

- by luppi

I created a database with aspnet_regsql, the database was created in sql sever 2008 and not in data folder in my project (do I need to move it to the folder manually?). Next, in Web Site Administration Tool I went to provider section and clicked don Test button. I got an error: Could not establish a connection to the database. If you have not yet created the SQL Server database, exit the Web Site Administration tool, use the aspnet_regsql command-line utility to create and configure the database, and then return to this tool to set the provider. Maybe I need to set something in a web.config, like membership settings or connection strings (or ASP.NET Website Administrator Tool should create those settings for me)? Update: Maybe it happens because I am using SQL server 2008 full and not express? Update 2: After setting membership section and connection string to my aspnetdb database in Web Site Administration Tool I've opened security-Security Setup Wizard-Define Roles (stage 4) I got this error: An error was encountered. Please return to the previous page and try again. The following message may help in diagnosing the problem: Unable to connect to SQL Server database. at System.Web.Administration.WebAdminPage.CallWebAdminHelperMethod(Boolean isMembership, String methodName, Object[] parameters, Type[] paramTypes) at ASP.security_wizard_wizardpermission_ascx.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

Read the article

Data Web Controls Enhancements in ASP.NET 4.0

Traditionally, developers using Web controls enjoyed increased productivity but at the cost of control over the rendered markup. For instance, many ASP.NET controls automatically wrap their content in <table> for layout or styling purposes. This behavior runs counter to the web standards that have evolved over the past several years, which favor cleaner, terser HTML; sparing use of tables; and Cascading Style Sheets (CSS) for layout and styling. Furthermore, the <table> elements and other automatically-added content makes it harder to both style the Web controls using CSS and to work with the controls from client-side script. One of the aims of ASP.NET version 4.0 is to give Web Form developers greater control over the markup rendered by Web controls. Last week's article, Take Control Of Web Control ClientID Values in ASP.NET 4.0, highlighted how new properties in ASP.NET 4.0 give the developer more say over how a Web control's ID property is translated into a client-side id attribute. In addition to these ClientID-related properties, many Web controls in ASP.NET 4.0 include properties that allow the page developer to instruct the control to not emit extraneous markup, or to use an HTML element other than <table>. This article explores a number of enhancements made to the data Web controls in ASP.NET 4.0. As you'll see, most of these enhancements give the developer greater control over the rendered markup. Read on to learn more! Read More >Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Data Web Controls Enhancements in ASP.NET 4.0

Traditionally, developers using Web controls enjoyed increased productivity but at the cost of control over the rendered markup. For instance, many ASP.NET controls automatically wrap their content in <table> for layout or styling purposes. This behavior runs counter to the web standards that have evolved over the past several years, which favor cleaner, terser HTML; sparing use of tables; and Cascading Style Sheets (CSS) for layout and styling. Furthermore, the <table> elements and other automatically-added content makes it harder to both style the Web controls using CSS and to work with the controls from client-side script. One of the aims of ASP.NET version 4.0 is to give Web Form developers greater control over the markup rendered by Web controls. Last week's article, Take Control Of Web Control ClientID Values in ASP.NET 4.0, highlighted how new properties in ASP.NET 4.0 give the developer more say over how a Web control's ID property is translated into a client-side id attribute. In addition to these ClientID-related properties, many Web controls in ASP.NET 4.0 include properties that allow the page developer to instruct the control to not emit extraneous markup, or to use an HTML element other than <table>. This article explores a number of enhancements made to the data Web controls in ASP.NET 4.0. As you'll see, most of these enhancements give the developer greater control over the rendered markup. Read on to learn more! Read More >

Read the article

SQL SERVER – Dedicated Access Control for SQL Server Express Edition – An error occurred while obtaining the dedicated administrator connection (DAC) port.

- by pinaldave

Recently I had faced very interesting situation. Due to some reason we were not able to login into the production server for one of client. The reason for the same was that server was very busy, we had to login into the system and bring server to normal situation. When all the attempts failed, I decided to login using Dedicated Administrator Connection (DAC). However when I attempted to connect using DAC it threw following error for me. C:\Users\pinald>sqlcmd -A -d master -S .\SQLEXPRESS Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : SQL Server Network Interfaces: An error occurred while obtaining the dedicated administrator connection (DAC) port. Make sure that SQL Browser is running, or check the error log for t he port number [xFFFFFFFF]. .Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Login timeout expired.Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online. I was bit taken a back as I knew that my commands are correct to login and if DAC does not work, there should be some serious reason for it. When inquired further about the SQL Server version I learned that it was SQL Server Express version deployed. To conserve resources, SQL Server Express does not listen on the DAC port. There is an additional step to be done if SQL Server Express has to be used with DAC. Enable TRACEFLAG on SQL Server Express will enable the connection by DAC possible. Here is the quick methods how one can enable DAC on SQL Server Express. Go to Start >> All Program >>Microsoft SQL Server (your version) >> Configuration Tools >> SQL Server Configuration Manager. Click on SQL Server Services >> Select your SQL Server Express version >> Right Click Properties >> select Startup Parameters Once on the Startup Parameter add the Startup parameter which is TRACEFLAG -T7806. Click on OK and RESTART SQL Server Express edition. Now once again try to connect to SQL Server Express edition and it will work just fine. This is absolutely documented method on BOL and SQL Server Express needs to be restarted. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Error Messages, SQL Interview Questions and Answers, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology Tagged: SQL Server Express

Read the article

Best Practices - updated: which domain types should be used to run applications

- by jsavit

This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (formerly named Logical Domains). This is an updated and enlarged version of the post on this topic originally posted October 2012. One frequent question "what type of domain should I use to run applications?" There used to be a simple answer: "run applications in guest domains in almost all cases", but now there are more things to consider. Enhancements to Oracle VM Server for SPARC and introduction of systems like the current SPARC servers including the T4 and T5 systems, the Oracle SuperCluster T5-8 and Oracle SuperCluster M6-32 provide scale and performance much higher than the original servers that ran domains. Single-CPU performance, I/O capacity, memory sizes, are much larger now, and far more demanding applications are now being hosted in logical domains. The general advice continues to be "use guest domains in almost all cases", meaning, "use virtual I/O rather than physical I/O", unless there is a specific reason to use the other domain types. The sections below will discuss the criteria for choosing between domain types. Review: division of labor and types of domain Oracle VM Server for SPARC offloads management and I/O functionality from the hypervisor to domains (also called virtual machines), providing a modern alternative to older VM architectures that use a "thick", monolithic hypervisor. This permits a simpler hypervisor design, which enhances reliability, and security. It also reduces single points of failure by assigning responsibilities to multiple system components, further improving reliability and security. Oracle VM Server for SPARC defines the following types of domain, each with their own roles: Control domain - management control point for the server, runs the logical domain daemon and constraints engine, and is used to configure domains and manage resources. The control domain is the first domain to boot on a power-up, is always an I/O domain, and is usually a service domain as well. It doesn't have to be, but there's no reason to not leverage it for virtual I/O services. There is one control domain per T-series system, and one per Physical Domain (PDom) on an M5-32 or M6-32 system. M5 and M6 systems can be physically domained, with logical domains within the physical ones. I/O domain - a domain that has been assigned physical I/O devices. The devices may be one more more PCIe root complexes (in which case the domain is also called a root complex domain). The domain has native access to all the devices on the assigned PCIe buses. The devices can be any device type supported by Solaris on the hardware platform. a SR-IOV (Single-Root I/O Virtualization) function. SR-IOV lets a physical device (also called a physical function) or PF) be subdivided into multiple virtual functions (VFs) which can be individually assigned directly to domains. SR-IOV devices currently can be Ethernet or InfiniBand devices. direct I/O ownership of one or more PCI devices residing in a PCIe bus slot. The domain has direct access to the individual devices An I/O domain has native performance and functionality for the devices it owns, unmediated by any virtualization layer. It may also have virtual devices. Service domain - a domain that provides virtual network and disk devices to guest domains. The services are defined by commands that are run in the control domain. It usually is an I/O domain as well, in order for it to have devices to virtualize and serve out. Guest domain - a domain whose devices are all virtual rather than physical: virtual network and disk devices provided by one or more service domains. In common practice, this is where applications are run. Device considerations Consider the following when choosing between virtual devices and physical devices: Virtual devices provide the best flexibility - they can be dynamically added to and removed from a running domain, and you can have a large number of them up to a per-domain device limit. Virtual devices are compatible with live migration - domains that exclusively have virtual devices can be live migrated between servers supporting domains. On the other hand: Physical devices provide the best performance - in fact, native "bare metal" performance. Virtual devices approach physical device throughput and latency, especially with virtual network devices that can now saturate 10GbE links, but physical devices are still faster. Physical I/O devices do not add load to service domains - all the I/O goes directly from the I/O domain to the device, while virtual I/O goes through service domains, which must be provided sufficient CPU and memory capacity. Physical I/O devices can be other than network and disk - we virtualize network, disk, and serial console, but physical devices can be the wide range of attachable certified devices, including things like tape and CDROM/DVD devices. In some cases the lines are now blurred: virtual devices have better performance than previously: starting with Oracle VM Server for SPARC 3.1 there is near-native virtual network performance. There is more flexibility with physical devices than before: SR-IOV devices can now be dynamically reconfigured on domains. Tradeoffs one used to have to make are now relaxed: you can often have the flexibility of virtual I/O with performance that previously required physical I/O. You can have the performance and isolation of SR-IOV with the ability to dynamically reconfigure it, just like with virtual devices. Typical deployment A service domain is generally also an I/O domain: otherwise it wouldn't have access to physical device "backends" to offer to its clients. Similarly, an I/O domain is also typically a service domain in order to leverage the available PCI buses. Control domains must be I/O domains, because they boot up first on the server and require physical I/O. It's typical for the control domain to also be a service domain too so it doesn't "waste" the I/O resources it uses. A simple configuration consists of a control domain that is also the one I/O and service domain, and some number of guest domains using virtual I/O. In production, customers typically use multiple domains with I/O and service roles to eliminate single points of failure, as described in Availability Best Practices - Avoiding Single Points of Failure . Guest domains have virtual disk and virtual devices provisioned from more than one service domain, so failure of a service domain or I/O path or device does not result in an application outage. This also permits "rolling upgrades" in which service domains are upgraded one at a time while their guests continue to operate without disruption. (It should be noted that resiliency to I/O device failures can also be provided by the single control domain, using multi-path I/O) In this type of deployment, control, I/O, and service domains are used for virtualization infrastructure, while applications run in guest domains. Changing application deployment patterns The above model has been widely and successfully used, but more configuration options are available now. Servers got bigger than the original T2000 class machines with 2 I/O buses, so there is more I/O capacity that can be used for applications. Increased server capacity made it attractive to run more vertically-scaled applications, such as databases, with higher resource requirements than the "light" applications originally seen. This made it attractive to run applications in I/O domains so they could get bare-metal native I/O performance. This is leveraged by the Oracle SuperCluster engineered systems mentioned previously. In those engineered systems, I/O domains are used for high performance applications with native I/O performance for disk and network and optimized access to the Infiniband fabric. Another technical enhancement is Single Root I/O Virtualization (SR-IOV), which make it possible to give domains direct connections and native I/O performance for selected I/O devices. Not all I/O domains own PCI complexes, and there are increasingly more I/O domains that are not service domains. They use their I/O connectivity for performance for their own applications. However, there are some limitations and considerations: at this time, a domain using physical I/O cannot be live-migrated to another server. There is also a need to plan for security and introducing unneeded dependencies: if an I/O domain is also a service domain providing virtual I/O to guests, it has the ability to affect the correct operation of its client guest domains. This is even more relevant for the control domain. where the ldm command must be protected from unauthorized (or even mistaken) use that would affect other domains. As a general rule, running applications in the service domain or the control domain should be avoided. For reference, an excellent guide to secure deployment of domains by Stefan Hinker is at Secure Deployment of Oracle VM Server for SPARC. To recap: Guest domains with virtual I/O still provide the greatest operational flexibility, including features like live migration. They should be considered the default domain type to use unless there is a specific requirement that mandates an I/O domain. I/O domains can be used for applications with the highest performance requirements. Single Root I/O Virtualization (SR-IOV) makes this more attractive by giving direct I/O access to more domains, and by permitting dynamic reconfiguration of SR-IOV devices. Today's larger systems provide multiple PCIe buses - for example, 16 buses on the T5-8 - making it possible to configure multiple I/O domains each owning their own bus. Service domains should in general not be used for applications, because compromised security in the domain, or an outage, can affect domains that depend on it. This concern can be mitigated by providing guests' their virtual I/O from more than one service domain, so interruption of service in one service domain does not cause an application outage. The control domain should in general not be used to run applications, for the same reason. Oracle SuperCluster uses the control domain for applications, but it is an exception. It's not a general purpose environment; it's an engineered system with specifically configured applications and optimization for optimal performance. These are recommended "best practices" based on conversations with a number of Oracle architects. Keep in mind that "one size does not fit all", so you should evaluate these practices in the context of your own requirements. Summary Higher capacity servers that run Oracle VM Server for SPARC are attractive for applications with the most demanding resource requirements. New deployment models permit native I/O performance for demanding applications by running them in I/O domains with direct access to their devices. This is leveraged in SPARC SuperCluster, and can be leveraged in T-series servers to provision high-performance applications running in domains. Carefully planned, this can be used to provide peak performance for critical applications. That said, the improved virtual device performance in Oracle VM Server means that the default choice should still be guest domains with virtual I/O.

Read the article

How to check if the tab page is dirty and prompt the user to save before navigating away using ajaxtoolkit tab control in ASP.NET

Step 1: Put a hidden variable in Update panel <asp:HiddenField ID="hfIsDirty" runat="server" Value="0" /> Step 2: Put the following code in ajaxcontrol tool kit tabcontainer OnClientActiveTabChanged="ActiveTabChanged" Copy the following script in the aspx page. <script type="text/javascript"> //Trigger Server side post back for the Tab container function ActiveTabChanged(sender, e) { __doPostBack('<%= tcBaseline.ClientID %>', ''); } //Sets the dirty flag if the page is dirty function setDirty() { var hf = document.getElementById("<%=hfIsDirty.ClientID%>"); if (hf != null) hf.value = 1; } //Resets the dirty flag after save function clearDirty() { var hf = document.getElementById("<%=hfIsDirty.ClientID%>"); hf.value = 0; } function showMessage() { return "page is dirty" } function setControlChange() { if (typeof (event.srcElement) != 'undefined') { event.srcElement.onchange = setDirty; } } function checkDirty() { var tc = document.getElementById("<%=tcBaseline.ClientID%>"); var hf = document.getElementById("<%=hfIsDirty.ClientID%>"); if (hf.value == "1") { var conf = confirm("Do you want o loose unsaved changes? Please Cancel to stay on page or OK to continue "); if (conf) { clearDirty(); return true; } else { var e = window.event; e.cancelBubble = true; if (e.stopPropagation) e.stopPropagation(); return false; } } else return true; } document.body.onclick = setControlChange; document.body.onkeyup = setControlChange; var onBeforeUnloadFired = false; // Function to reset the above flag. function resetOnBeforeUnloadFired() { onBeforeUnloadFired = false; } function doBeforeUnload() { var hf = document.getElementById("<%=hfIsDirty.ClientID%>"); // If this function has not been run before... if (!onBeforeUnloadFired) { // Prevent this function from being run twice in succession. onBeforeUnloadFired = true; // If the form is dirty... if (hf.value == "1") { event.returnValue = "If you continue you will lose any changes that you have made to this record."; } } window.setTimeout("resetOnBeforeUnloadFired()", 1000); } if (window.body) { window.body.onbeforeunload = doBeforeUnload; } else window.onbeforeunload = doBeforeUnload; </script> Step 3: Here is how the tabcontrol should look like <asp:UpdatePanel ID="upTab" runat="server" UpdateMode="conditional"> <ContentTemplate> <ajaxtoolkit:TabContainer ID="tcBaseline" runat="server" Height="400px" OnClientActiveTabChanged="ActiveTabChanged"> <ajaxtoolkit:TabPanel ID="tpPersonalInformation" runat="server"> <HeaderTemplate> <asp:Label ID="lblPITab" runat="server" Text="<%$ Resources:Resources, Baseline_Tab_PersonalInformation %>" onclick="checkDirty();"></asp:Label> </HeaderTemplate> <ContentTemplate> <asp:PlaceHolder ID="PlaceHolder1" runat="server"></asp:PlaceHolder> </ContentTemplate> </ajaxtoolkit:TabPanel> span.fullpost {display:none;}

Read the article

Retrieving "invalid" value from a NumericUpDown Validating event

- by alhazen

When the user enters a value above numericUpDown.Maximum, the control's value is automatically set to the maximum. I'd like to display a MessageBox when this occurs, but I'm not able to do that because control.Value and control.Text already contain the automatically set value, maximum, when Validating event is raised. private void numericUpDown_Validating(object sender, System.ComponentModel.CancelEventArgs e) { NumericUpDown control = sender as NumericUpDown; decimal newValue = control.Value; // decimal newValue; // decimal.TryParse(control.Text, out newValue) if (newValue > control.Maximum || newValue < control.Minimum) { // MessageBox } } Thanks

Read the article

How to Activate VLC’s Web Interface, Control VLC From a Browser, & Use Any Smartphone as a Remote

- by Chris Hoffman

VLC includes a web interface, which you can enable to access your VLC player from a web browser, controlling playback from another device – particularly useful for a media center PC. VLC also offers a mobile web interface for smartphones. The web interface is turned off and locked down by default – you have to edit the web server’s .hosts file or VLC will disallow all incoming connections from other devices. How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

Read the article

Error when changing default lanuage in asp.net compilation from vb to c#

- by Herman

Hi all, We have a updatable web site project that is written in c#, it has the usual web form implementation using master page, skins, user controls,...etc. Up to this point we neglect to change the default compilation language from VB to C#. However, the second we change it, we see the following error. Object reference not set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object. at ASP.Default.__DataBinding__control499(Object sender, EventArgs e) at System.Web.UI.Control.OnDataBinding(EventArgs e) at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding) at System.Web.UI.Control.DataBindChildren() at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding) at System.Web.UI.Control.DataBindChildren() at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding) at System.Web.UI.Control.DataBindChildren() at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding) at System.Web.UI.Control.DataBindChildren() at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding) at .... Further investigation points out that this error is getting generated from a Theme related assembly (Source : App_Theme_Default.zclakrlo). Any ideas? One of my co-worker suggested that it might be skin file related since we have a theme call "Default" and there is no way to specify a language on a skin file. Therefore, when the asp.net runtime tries to compile it under C#, it will give a name collision? Does this make sense? Any help is appreciated.

Read the article

Error displaying a WinForm in Design mode with a custom control on it.

- by George

I have a UserControl that is part of a Class library. I reference this project from my solution. This adds a control from the referenced project to my toolbox. I add tghe control to a form. Everything looks good, I compile all and run. Perfect... But when I close the .frm with the control on it and re-open it, I get this error. The code continues to run. It may have something to do with namespaces. The original namespace was simply "Design" and this was ambiguous and conflicting so i decided to rename it. I think that's when my problems began. To prevent possible data loss before loading the designer, the following errors must be resolved: 2 Errors Ignore and Continue Why am I seeing this page? Could not find type 'Besi.Winforms.HtmlEditor.Editor'. Please make sure that the assembly that contains this type is referenced. If this type is a part of your development project, make sure that the project has been successfully built using settings for your current platform or Any CPU. Instances of this error (1) 1. There is no stack trace or error line information available for this error. Help with this error Could not find an associated help topic for this error. Check Windows Forms Design-Time error list Forum posts about this error Search the MSDN Forums for posts related to this error The variable 'Editor1' is either undeclared or was never assigned. Go to code Instances of this error (1) 1. BesiAdmin frmOrder.Designer.vb Line:775 Column:1 Show Call Stack at System.ComponentModel.Design.Serialization.CodeDomSerializerBase.Error(IDesignerSerializationManager manager, String exceptionText, String helpLink) at System.ComponentModel.Design.Serialization.CodeDomSerializerBase.DeserializeExpression(IDesignerSerializationManager manager, String name, CodeExpression expression) at System.ComponentModel.Design.Serialization.CodeDomSerializerBase.DeserializeExpression(IDesignerSerializationManager manager, String name, CodeExpression expression) at System.ComponentModel.Design.Serialization.CodeDomSerializerBase.DeserializeStatement(IDesignerSerializationManager manager, CodeStatement statement) Help with this error MSDN Help Forum posts about this error Search the MSDN Forums for posts related to this error

Read the article

How to control in the vertex shader where pixel ends up in the renderTarget?

- by cubrman

What if I have an arbitrary renderTarget, that is smaller than the screen (say it is 1x1 pixel) and I want to make sure in the VertexShaderFunction that all my pixels end up exactly in that 1 pixel region? No matter what I do, they all seem to get culled at some point, though GraphicDevise.Clear() works OK. Where is the top left corner of the renderTarget Vertex-shader-vise? I tried output.Position = (0,0,0,0)/(0,0,0,1)/(1,1,1,1)/(-0.5,0.5,0,1) NOTHING works! Fullscreen quad is not an option 'cause I actually need to process geometry in the shaders to get the results I need.

Read the article

Different location of assemblies stoped the type casting.

- by smwikipedia

I am writing a custom Control class in C# for my main project. There're 2 projects, one for my Control and one for my main project. These 2 projects are in the same solution. I add a reference from my main project to my Control project. I notice that the first time after I drag my Control from the Tool Panel onto my main winform, an assembly folder was generated at the C:\Users\XXX\AppData\Local\Microsoft\VisualStudio\9.0\ProjectAssemblies, and the folder name is something like "jlebh-py01". The first build is always OK, but after I rebuild my Control class or whole solution, a new assembly folder will be generated at C:\Users\XXX\AppData\Local\Microsoft\VisualStudio\9.0\ProjectAssemblies, and then problem arises, my Control fails to behave well because Visual Studio says that the two types "originates from different location". The error message is as below: [A]MyControl.TypeXXX cannot be cast to [B]MyControl.TypeXXX. Type A orginates from assemblyXXX at location 'C:\Users\XXX\AppData\Local\Microsoft\VisualStudio\9.0\ProjectAssemblies\jlebh-py01\MyControl.dll' Type B originats from assemblyXXX at location 'C:\Users\XXX\AppData\Local\Microsoft\VisualStudio\9.0\ProjectAssemblies\ue4i-z3j01\MyControl.dll' If I reference the Control DLL directly instead of through project reference, or never rebuild the Control project after use my Control in the main project, things seem to be OK. Does anyone knows why? Is it the proper way to develop a control and a main project within the same solution? Many thanks...

Read the article

How to check if the tab page is dirty and prompt the user to save before navigating away using ajaxtoolkit tab control in ASP.NET

Step 1: Put a hidden variable in Update panel <asp:HiddenField ID="hfIsDirty" runat="server" Value="0" /> Step 2: Put the following code in ajaxcontrol tool kit tabcontainer OnClientActiveTabChanged="ActiveTabChanged" Copy the following script in the aspx page. <script type="text/javascript"> //Trigger Server side post back for the Tab container function ActiveTabChanged(sender, e) { __doPostBack('<%= tcBaseline.ClientID %>', ''); } //Sets the dirty flag if the page is dirty function setDirty() { var hf = document.getElementById("<%=hfIsDirty.ClientID%>"); if (hf != null) hf.value = 1; } //Resets the dirty flag after save function clearDirty() { var hf = document.getElementById("<%=hfIsDirty.ClientID%>"); hf.value = 0; } function showMessage() { return "page is dirty" } function setControlChange() { if (typeof (event.srcElement) != 'undefined') { event.srcElement.onchange = setDirty; } } function checkDirty() { var tc = document.getElementById("<%=tcBaseline.ClientID%>"); var hf = document.getElementById("<%=hfIsDirty.ClientID%>"); if (hf.value == "1") { var conf = confirm("Do you want o loose unsaved changes? Please Cancel to stay on page or OK to continue "); if (conf) { clearDirty(); return true; } else { var e = window.event; e.cancelBubble = true; if (e.stopPropagation) e.stopPropagation(); return false; } } else return true; } document.body.onclick = setControlChange; document.body.onkeyup = setControlChange; var onBeforeUnloadFired = false; // Function to reset the above flag. function resetOnBeforeUnloadFired() { onBeforeUnloadFired = false; } function doBeforeUnload() { var hf = document.getElementById("<%=hfIsDirty.ClientID%>"); // If this function has not been run before... if (!onBeforeUnloadFired) { // Prevent this function from being run twice in succession. onBeforeUnloadFired = true; // If the form is dirty... if (hf.value == "1") { event.returnValue = "If you continue you will lose any changes that you have made to this record."; } } window.setTimeout("resetOnBeforeUnloadFired()", 1000); } if (window.body) { window.body.onbeforeunload = doBeforeUnload; } else window.onbeforeunload = doBeforeUnload; </script> Step 3: Here is how the tabcontrol should look like <asp:UpdatePanel ID="upTab" runat="server" UpdateMode="conditional"> <ContentTemplate> <ajaxtoolkit:TabContainer ID="tcBaseline" runat="server" Height="400px" OnClientActiveTabChanged="ActiveTabChanged"> <ajaxtoolkit:TabPanel ID="tpPersonalInformation" runat="server"> <HeaderTemplate> <asp:Label ID="lblPITab" runat="server" Text="<%$ Resources:Resources, Baseline_Tab_PersonalInformation %>" onclick="checkDirty();"></asp:Label> </HeaderTemplate> <ContentTemplate> <asp:PlaceHolder ID="PlaceHolder1" runat="server"></asp:PlaceHolder> </ContentTemplate> </ajaxtoolkit:TabPanel> span.fullpost {display:none;}

Read the article

Should maven generate jaxb java code or just use java code from source control?

- by Peter Turner

We're trying to plan how to mash together a build server for our shiny new java backend. We use a lot of jaxb XSD code generation and I was getting into a heated argument with whoever cared that the build server should delete jaxb created structures that were checked in generate the code from XSD's use code generated from those XSD's Everyone else thought that it made more sense to just use the code they checked in (we check in the code generated from the XSD because Eclipse pretty much forces you to do this as far as I can tell). My only stale argument is in my reading of the Joel test is that making the build in one step means generating from the source code and the source code is not the java source, but the XSD's because if you're messing around with the generated code you're gonna get pinched eventually. So, given that we all agree (you may not agree) we should probably be checking in our generate java files, should we use them to generate our code or should we generate it using the XSD's?

Read the article

MFC Combo-Box Control is not showing the full list of items when I click the drop-down menu...

- by shan23

I'm coding an app in MSVS 2008, which has a ComboBox control which I initialize thru the code as below: static char* OptionString[4] = {"Opt1", "Opt2", "Opt3", "Opt4"}; BOOL CMyAppDlg::OnInitDialog() { CDialog::OnInitDialog(); // Set the icon for this dialog. The framework does this automatically // when the application's main window is not a dialog SetIcon(m_hIcon, TRUE); // Set big icon SetIcon(m_hIcon, FALSE); // Set small icon // TODO: Add extra initialization here m_Option.AddString(OptionString[0]); m_Option.AddString(OptionString[1]); m_Option.AddString(OptionString[2]); m_Option.AddString(OptionString[3]); m_Option.SetCurSel(0); return TRUE; // return TRUE unless you set the focus to a control } Now, when I build the app and click the down-arrow, the drop-down box shows the first option ONLY(since I've selected that thru my code). But, if i press down-arrow key on keyboard, it cycles thru the options in the order I've inserted, but never does it show more than 1 option in the box. So, In case an user wants to select option3, he has to cycle through options 1 and 2 !! Though once I select any option using the keyboard, the appropriate event handlers are fired, I'm miffed by this behaviour , as is understandable. I'm listing the properties of the combo-box control as well - only the properties that are true(rest are set to false): Type - Dropdown Vertical Scrollbar Visible Tabstop This has bugged me for weeks now. Can anyone pls enlighten me ?

Read the article

python Velocity control of the player, why doesn't this work?

- by Dominic Grenier

I have the following code inside a while True loop: if abs(playerx) < MAXSPEED: if moveLeft: playerx -= 1 if moveRight: playerx += 1 if abs(playery) < MAXSPEED: if moveDown: playery += 1 if moveUp: playery -= 1 if moveLeft == False and abs(playerx) > 0: playerx += 1 if moveRight == False and abs(playerx) > 0: playerx -= 1 if moveUp == False and abs(playery) > 0: playery += 1 if moveDown == False and abs(playery) > 0: playery -= 1 player.x += playerx player.y += playery if player.left < 0 or player.right > 1000: player.x -= playerx if player.top < 0 or player.bottom > 600: player.y -= playery The intended result is that while an arrow key is pressed, playerx or y increments by one at every loop until it reaches MAXSPEED and stays at MAXSPEED. And that when the player stops pressing that arrow key, his speed decreases. Until it reaches 0. To me, this code explicitly says that... But what actually happens is that playerx or y keeps incrementing regardless of MAXSPEED and continues moving even after the player stops pressing the arrow key. I keep rereading but I'm completely baffled by this weird behavior. Any insights? Thanks.

Read the article

Why would someone want to take over control of my domain name?

- by mike jones

I was approached by a person wanting to help me set up a website. In order to do this he has requested that I allow him to transfer my domain name to his account, for easier management. I would retain the right of usage and he would pay the bill for maintaining the name. This sounds fishy, but I can't figure out what he hopes to gain if this is a scam. Is this a common practice among 'Administrative Contacts'?

Search Results

Search found 21140 results on 846 pages for 'control theory'.

Page 183/846 | < Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190 | Next Page >

- by karim

- by luklatlug

- by Jelly Amma

- by Josh

- by Bryce Thomas

- by GorillaSandwich

- by ThundLayr

- by Rosarch

- by luppi

- by pinaldave

- by jsavit

- by alhazen

- by Chris Hoffman

- by Herman

- by George

- by cubrman

- by smwikipedia

- by Peter Turner

- by shan23

- by Dominic Grenier

- by mike jones

< Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190 | Next Page >