Search Results

Search found 23832 results on 954 pages for 'home drive'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 183/954 | < Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >

  • Need recommendation: which USB card (PCMCIA) works with external hard drive?

    - by Carl
    I have an HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My external hard drive w/USB adapter won't work with it, and it will work plugged directly into a USB port on a different laptop. (My USB ports got fried.) I got the card off E-Bay. My MP3 player works plugged into that card. The drivers for the card say "Known limitations: High Speed Isochronus, USB Composite Devices." (No other details provided.) I don't know if the hard drive adapter is "isochronous" or "composite." I've read there are problems with too little power being supplied to the drive. The cable to the drive has two USB plugs on one end, and it doesn't make any difference if I plug both of them into the Cardbus card. What card should I get? I see many different brands on E-Bay. I need one that supplies sufficient power for an external hard drive, and doesn't have any "known limitations" in the way.

    Read the article

  • Is there a way to password protect my external drive and be compatible with both Windows and MAC?

    - by Stucko
    I have an external hard drive (HD-PXTU2 Series). I used it for more than 6 months now, what I liked about it was its password protect utility that comes together with the drive. However the problem is the password protect utility is not compatible with MAC ( I'l be regularly transferring data between MacOS and Windows). Is there a way to password protect my external drive which is compatible with both Windows and MacOS?

    Read the article

  • Can different drive speeds and sizes be used in a hardware RAID configuration w/o affecting performance?

    - by R. Dill
    Specifically, I have a RAID 1 array configuration with two 500gb 7200rpm SATA drives mirrored as logical drive 1 (a) and two of the same mirrored as logical drive 2 (b). I'd like to add two 1tb 5400rpm drives in the same mirrored fashion as logical drive 3 (c). These drives will only serve as file storage with occasional but necessary access, and therefore, space is more important than speed. In researching whether this configuration is doable, I've been told and have read that the array will only see the smallest drive size and slowest speed. However, my understanding is that as long as the pairs themselves aren't mixed (and in this case, they aren't) that the array should view and use all drives at their actual speed and size. I'd like to be sure before purchasing the additional drives. Insight anyone?

    Read the article

  • Howto install acts_as_xapian on Ubuntu

    - by normalocity
    I've run into some great resources for installing "acts_as_xapian", and the supporting native libraries that are necessary to make it work. I've even got it to work well on my dev machine (OS X). However, I've followed the instructions on this site, and it doesn't work on my Ubuntu 9.10 (Karmic) production box. After successfully installing the "core" and "bindings" for xapian, the start of the mongrel server fails with the following: => Booting Mongrel => Rails 2.3.5 application starting on http://0.0.0.0:3000 acts_as_xapian: No Ruby bindings for Xapian installed /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:105:in `const_missing': uninitialized constant ActsAsXapian::Search::Xapian (NameError) from /var/lib/gems/1.8/gems/acts_as_xapian-0.1.3/lib/acts_as_xapian/search.rb:8 from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:521:in `new_constants_in' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /var/lib/gems/1.8/gems/acts_as_xapian-0.1.3/lib/acts_as_xapian.rb:2 from /var/lib/gems/1.8/gems/acts_as_xapian-0.1.3/lib/acts_as_xapian.rb:1:in `each' from /var/lib/gems/1.8/gems/acts_as_xapian-0.1.3/lib/acts_as_xapian.rb:1 from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:521:in `new_constants_in' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/rails/gem_dependency.rb:208:in `load' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:307:in `load_gems' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:307:in `each' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:307:in `load_gems' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:164:in `process' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:113:in `send' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/initializer.rb:113:in `run' from /home/feelgoodtrader/feelgoodtrader/config/environment.rb:13 from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:521:in `new_constants_in' from /home/feelgoodtrader/.gem/ruby/1.8/gems/activesupport-2.3.5/lib/active_support/dependencies.rb:156:in `require' from /home/feelgoodtrader/.gem/ruby/1.8/gems/rails-2.3.5/lib/commands/server.rb:84 from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' from /usr/lib/ruby/1.8/rubygems/custom_require.rb:31:in `require' from script/server:3

    Read the article

  • Psychonauts crashes right after entering load save door

    - by user67974
    Psychonauts crashes right after entering the 'Load Save' door. Here is the terminal output: Shader assembly time: 0.88 seconds Found OpenAL device: 'Simple Directmedia Layer' Found OpenAL device: 'ALSA Software' Found OpenAL device: 'OSS Software' Found OpenAL device: 'PulseAudio Software' Opened OpenAL Device: '(null)' ERROR: CAudioDrv::CAudioDrv->alGenSources reports AL_INVALID_VALUE error. PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonfx.isb' to 'WorkResource/Sounds/commonfx.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonvoice.isb' to 'WorkResource/Sounds/commonvoice.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonmusic.isb' to 'WorkResource/Sounds/commonmusic.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonmentalfx.isb' to 'WorkResource/Sounds/commonmentalfx.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonmenfxmem.isb' to 'WorkResource/Sounds/commonmenfxmem.isb' PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/commonfxmem.isb' to 'WorkResource/Sounds/commonfxmem.isb' GameApp::StartUp InitSoundFiles() completed in 0.15 seconds GameApp::StartUp Load some common textures completed in 0.00 seconds WARN: ENGINE: Lua garbage collection starting FreeUnusedBlocksInBuckets released 0 Kb GameApp::StartUp InitEntities() completed in 0.02 seconds PSYCHONAUTS UNIX FILENAME: corrected 'WorkResource/SavedGames/savegameprefs.ini' to 'WorkResource/SAVEDGAMES/savegameprefs.ini' PSYCHONAUTS UNIX FILENAME: corrected 'WorkResource/SavedGames/savegameprefs.ini' to 'WorkResource/SAVEDGAMES/savegameprefs.ini' GameApp::StartUp m_pSaveLoadInterface->Startup() completed in 0.00 seconds GameApp::StartUp m_UserInterface.Setup() completed in 0.00 seconds STUBBED: multisample at EDisplayOptionsWidget (/home/icculus/projects/psychonauts/Source/game/luatest/Game/UIPCDisplayOptions.cpp:97) STUBBED: VK_* at CheckVirtualKey (/home/icculus/projects/psychonauts/Source/CommonLibs/DirectX/SDLInput.cpp:1443) Game: Engine Running hook startup Game: Engine -> SetupGlobalObjects Game: Engine -> SetupLevelMenu Game: Engine -> InitMath GameApp::StartUp InitLua2() completed in 0.00 seconds GameApp::StartUp SetupLevelMenu() completed in 0.00 seconds STUBBED: do we even use this? at InitSocket (/home/icculus/projects/psychonauts/Source/game/luatest/Game/Gameplaylogger.cpp:210) GameApp::StartUp Post-Install total completed in 0.20 seconds Start Up completed in 1.57 seconds UnixMain: StartUp successful.. Working directory: /opt/psychonauts STUBBED: dispatch SDL events at PCMainHandleAnyWindowsMessages (/home/icculus/projects/psychonauts/Source/game/luatest/UnixMain.cpp:56) STUBBED: write me at GetJoystickInput (/home/icculus/projects/psychonauts/Source/CommonLibs/DirectX/SDLInput.cpp:428) STUBBED: write me at GetJoystickActionValue (/home/icculus/projects/psychonauts/Source/CommonLibs/DirectX/SDLInput.cpp:613) PSYCHONAUTS UNIX FILENAME: corrected 'workresource/cutScenes/prerendered/dflogo.bik' to 'WorkResource/cutscenes/prerendered/DFLogo.bik' Prerender subtitle file: workresource\cutScenes\prerendered\dflogo.dfs not found PSYCHONAUTS UNIX FILENAME: corrected 'workresource/cutScenes/prerendered/dflogo.bik' to 'WorkResource/cutscenes/prerendered/DFLogo.bik' STUBBED: fixed function pipeline? at setColorOp (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2097) STUBBED: fixed function pipeline? at setColorArg1 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2106) STUBBED: fixed function pipeline? at setColorArg2 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2115) STUBBED: fixed function pipeline? at setAlphaOp (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2124) STUBBED: fixed function pipeline? at setAlphaArg1 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2133) STUBBED: fixed function pipeline? at setAlphaArg2 (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2142) STUBBED: fixed function pipeline? at setProjected (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Texture.cpp:2223) LOC WARN: Could not open Localization file 'Localization/English/_StringTable.lub' STUBBED: memory status at UpdateMemoryTracking (/home/icculus/projects/psychonauts/Source/game/luatest/Game/GameApp.cpp:4884) WARN: Couldn't resize array to 128; out-of-bounds elements are still in use: Vertex Pool, 188 Loading new level 'STMU' STUBBED: Need multithreaded GL at DisplayLoadingScreen (/home/icculus/projects/psychonauts/Source/game/luatest/Game/LoadingScreen.cpp:83) ========================= Memory post unload level ========================= ========================= LOC WARN: Could not open Localization file 'Localization/English/ST_StringTable.lub' DaveD: Info: Texture pack file contains 137 textures Doing a texture readback for locking! Game: Engine Saved[GLOBAL]: InstaHintFord_HostileRecord = [table] Game: Engine Saved[GLOBAL]: InstaHintFord_HostileOrder = [table] WARN: Redundant packfile read: anims\thought_bubble\bubblefirestarting.jan WARN: Redundant packfile read: anims\thought_bubble\bubbleintothemind.jan WARN: Redundant packfile read: anims\thought_bubble\bubbleinvisibility.jan WARN: Redundant packfile read: anims\thought_bubble\bubblepopperfill.jan WARN: Redundant packfile read: anims\thought_bubble\bubbletelekinesis.jan Initializing level script (if there is one) PSYCHONAUTS UNIX FILENAME: corrected 'workresource/sounds/stfx.isb' to 'WorkResource/Sounds/stfx.isb' Game: Engine Reloading goals: Game: Engine Saved[GLOBAL]: NextEncouragement = '/GLZF014TO/ 10' Game: Engine Saved[GLOBAL]: bUsedSalts = 0 Game: Engine Saved[GLOBAL]: bSTEntered = 1 Game: Engine Saved[GLOBAL]: memoriesST = 1 Game: Engine Saved[GLOBAL]: PsiBallColor = 'red' Game: Engine Saved[ST]: lastSubLevel = 'STMU' Game: Engine LOADING LEVEL st.STMU Game: Engine Saved[CA]: CALevelState = 1 Game: Engine Cutscene progression: CS Script moving from state nil to state nil, resultant state nil. Time: 0.124746672809124. * Stack Trace 1: (null) (line -1, file '(none)) () 2: SpawnScript (line -1, file 'C) (global) 3: onBeginLevel (line -1, file '(none)) (field) 4: (null) (line -1, file '(none)) () WARN: Cannot call GetDirectoryListing when running from the DVD Game: Engine Raz spawning at DartStart startpoint VM : LevelScript could not find script 'doorrimlight1' * Stack Trace 1: (null) (line -1, file '(none)) () WARN: (none(-1) SetEntityAlpha LevelScript: NULL script object passed Game: Engine Saved[GLOBAL]: bLoadedFromMainMenu = 1 Game: Engine Saved[GLOBAL]: NextEncouragement = '/GLZF014TO/ 10' Game: Engine Saved[GLOBAL]: NeedRankIncrement = 0 STUBBED: Need multithreaded GL at HideLoadingScreen (/home/icculus/projects/psychonauts/Source/game/luatest/Game/LoadingScreen.cpp:110) WARN: ENGINE: Lua garbage collection starting FreeUnusedBlocksInBuckets released 0 Kb Game: Engine Saved[GLOBAL]: SplineFigmentTVSizex = 4.51434326171875 Game: Engine Saved[GLOBAL]: SplineFigmentTVSizey = 46.38104248046875 Game: Engine Saved[GLOBAL]: SplineFigmentTVSizez = 47.08810424804688 WARN: (none(-1) SetNewAction LevelScript: no string passed ====================== Asset load progression ====================== Initial: 2.518 MB Vertex, 8.688 MB Texture Level : 3.719 MB Vertex, 22.535 MB Texture Scripts: 3.747 MB Vertex, 22.848 MB Texture ====================== ====================== Memory post level load ====================== ====================== WARN: ENGINE: Lua garbage collection starting FreeUnusedBlocksInBuckets released 0 Kb DaveD: Level loaded in 0.14 seconds Anim: anims\objects\tk_arrow_idle.jan: loaded (1 frames latency) Anim: anims\dartnew\helmet\darthelmetdn.jan: loaded (1 frames latency) Anim: anims\thought_bubble\shieldloop.jan: loaded (1 frames latency) Anim: anims\dartnew\standready.jan: loaded (1 frames latency) Anim: anims\dartnew\walkmove.jan: loaded (1 frames latency) Anim: anims\janitor\hint_end.jan: loaded (1 frames latency) Anim: anims\thought_bubble\ballstatic.jan: loaded (1 frames latency) Anim: anims\dartnew\actionfall.jan: loaded (1 frames latency) Anim: anims\dartnew\standstill.jan: loaded (1 frames latency) Anim: anims\dartnew\pack\packbounce_lf_rt.jan: loaded (1 frames latency) Anim: anims\dartnew\pack\packbounce_up_dn.jan: loaded (1 frames latency) Anim: anims\dartnew\helmet\darthelmetdefpose.jan: loaded (1 frames latency) 1: 1 (number) 1: 1 (number) STUBBED: This is probably wrong at GetDt (/home/icculus/projects/psychonauts/Source/CommonLibs/DFUtil/Profiler.cpp:181) STUBBED: set specular highlights at setSpecularEnable (/home/icculus/projects/psychonauts/Source/CommonLibs/DFGraphics/Renderer.cpp:2035) Anim: anims\dartnew\trnrtcycle.jan: loaded (1 frames latency) Anim: anims\dartnew\run.jan: loaded (1 frames latency) Anim: anims\dartnew\walk.jan: loaded (1 frames latency) Anim: anims\thought_bubble\bubbledoublejump.jan: loaded (1 frames latency) Anim: anims\dartnew\longjump.jan: loaded (1 frames latency) Anim: anims\menubrain\door1crack.jan: loaded (1 frames latency) Anim: anims\menubrain\door1crackedidle.jan: loaded (1 frames latency) Anim: anims\menubrain\door1closedidle.jan: loaded (1 frames latency) Anim: anims\dartnew\180.jan: loaded (1 frames latency) Anim: anims\menubrain\door3crack.jan: loaded (1 frames latency) Anim: anims\menubrain\door3crackedidle.jan: loaded (1 frames latency) Anim: anims\menubrain\door3closedidle.jan: loaded (1 frames latency) Anim: anims\dartnew\railslide45angle.jan: loaded (1 frames latency) Anim: anims\dartnew\railslideflat.jan: loaded (1 frames latency) Anim: anims\dartnew\trnlfcycle.jan: loaded (1 frames latency) WARN: (none(-1) SetNewAction LevelScript: no string passed Anim: anims\dartnew\mainmenu_jump.jan: loaded (1 frames latency) Anim: anims\menubrain\door1open.jan: loaded (1 frames latency) ERROR: Assert in /home/icculus/projects/psychonauts/Source/game/luatest/../../CommonLibs/Include/../DFGraphics/Color.h, line 96 v.x >= 0.0f && v.x <= 1.0f && v.y >= 0.0f && v.y <= 1.0f && v.z >= 0.0f && v.z <= 1.0f && v.w >= 0.0f && v.w <= 1.0f Encountered Error: Psychonauts has encountered an error /home/icculus/projects/psychonauts/Source/game/luatest/../../CommonLibs/Include/../DFGraphics/Color.h, line 96 v.x >= 0.0f && v.x <= 1.0f && v.y >= 0.0f && v.y <= 1.0f && v.z >= 0.0f && v.z <= 1.0f && v.w >= 0.0f && v.w <= 1.0f Please contact technical support at http://www.doublefine.com. I am currently using Bumblebee for hybrid graphics, if that helps in any way.

    Read the article

  • How to Install vaio-control-center from source?

    - by KasiyA
    I have a problem about turning off keyboard backlight that I asked here with no useful answers. After searching on internet I find a package for vaio control center and downloaded it from here, I don't know how to install it. This is the output of trying one solution: USER@XXXXpc:~/vaio-control-center-0.1$ ls compile Makefile run vaio-control-center vcc COPYING moc_main_window.cpp ui_main_window.h vaio-control-center.pro USER@XXXXpc:~/vaio-control-center-0.1$ ./compile make: *** No rule to make target `/usr/share/qt/mkspecs/linux-g++-64/qmake.conf', needed by `Makefile'. Stop. USER@XXXXpc:~/vaio-control-center-0.1$ ./run ./run: 3: ./run: ./vaio-control-center: not found USER@XXXXpc:~/vaio-control-center-0.1$ Updated I tried also with @pandya's suggestion from here. and the output is as follows: root@user-pc:/# cd /home/user/vaio-f11-linux.control-center root@user-pc:/home/user/vaio-f11-linux.control-center# ls compile COPYING resource.qrc run sony-acpid vaio-control-center.pro vcc root@user-pc:/home/user/vaio-f11-linux.control-center# ./compile -su: ./compile: Permission denied root@user-pc:/home/user/vaio-f11-linux.control-center# sudo ./compile sudo: ./compile: command not found root@user-pc:/home/user/vaio-f11-linux.control-center# gksudo ./compile root@user-pc:/home/user/vaio-f11-linux.control-center# <----- nothing happened here root@user-pc:/home/user/vaio-f11-linux.control-center# ./run -su: ./run: Permission denied root@user-pc:/home/user/vaio-f11-linux.control-center# sudo ./run sudo: ./run: command not found root@user-pc:/home/user/vaio-f11-linux.control-center# gksudo ./run root@user-pc:/home/user/vaio-f11-linux.control-center# <----- nothing happened here root@user-pc:/home/user/vaio-f11-linux.control-center# and after running that I didn't see any affect on keyboard backlight.

    Read the article

  • Gnu/Linux package manager, multiple versions, no root privilege

    - by user744629
    I'm looking for a Gnu/Linux package manager, that can help to package, distribute, install sofware (actually scientific libraries), like this: do not required root privilege, for example, install in $HOME/opt or $HOME/local manage muliple version of a library, for example, with this directories organisation: $HOME/opt/somelib/4.2.1/lib/ $HOME/opt/somelib/4.2.1/include/ $HOME/opt/somelib/4.2.1/bin/ $HOME/opt/somelib/4.2.2/lib/ $HOME/opt/somelib/4.2.2/include/ $HOME/opt/somelib/4.2.2/bin/ $HOME/opt/anotherlib/1.0.0/lib/ $HOME/opt/anotherlib/1.0.0/include/ $HOME/opt/anotherlib/1.0.0/bin/ package contains source files, not binaries, build is performed during install. support for Mac OS X too would be good. Then it's up to the user to manage it's LD_LIBRARY_PATH, or compile with -L/good/path etc. Does it exists?

    Read the article

  • Can and should UDF be used as a hard drive format?

    - by dlamblin
    Several time recently I've seen UDF suggested as the solution to a cross platform format for a drive used on Linux, Mac OS X and Windows XP and above. I've searched here and not found the same suggestion (most are suggesting ntfs-3g which seems to cost money and isn't preinstalled on a Mac). So my question is: how is this done right, and has anyone done this? Have you then filled up the drive and deleted some files to make space finding that everything works like a real r/w format even though it seems to have been primarily a write once format?

    Read the article

  • Launch a real install of Ubuntu already on another hard-drive in Windows 7 like a VM

    - by Chad M
    I'm not too familiar with VMs and the like so this may not even be possible. Here is what I have: A real, full install of Windows 7 on hard drive A. A real, full install of Ubuntu 10.04 on hard drive B. Grub allowing me to select what I want to launch when I start up my computer. It would be Amazing if I could do one of two things. Within Windows 7, launch my real install of ubuntu as if it were a VM. That means i would get all the installed software, all of the files, and all of the settings. Launch a VM copy of ubuntu 10.04 but some how make it use all of the installed software and settings from my real copy. Thanks!

    Read the article

  • Samba shares won't automount on boot from fstab

    - by kelvin
    This question seems to have been asked a few times, but doesn't seem anybody has really solved it yet, at least not for my specific circumstance. I have FSAT setup to mount a CIFs share, but on boot up the share never gets mounted. However, if i run mount -a after boot up, it mounts everything just fine. Here's what my fstab looks like. Ignore the commented ones... I just did a few for testing purposes right now. //192.168.1.97/media /mnt/samba cifs credentials=/home/xbmc/.smbcredentials,rw,file_mode=0777,dir_mode=0777,sec=ntlm,auto 0 0 #//192.168.1.97/media/TV\040Shows /home/xbmc/TV\040Shows cifs credentials=/home/xbmc/.smbcredentials,rw,file_mode=0777,dir_mode=0777,sec=ntlm,auto //192.168.1.97/media/Movies /home/xbmc/Movies cifs credentials=/home/xbmc/.smbcredentials,rw,file_mode=0777,dir_mode=0777,sec=ntlm,auto 0 0 //192.168.1.97/media/Music /home/xbmc/Music cifs credentials=/home/xbmc/.smbcredentials,rw,file_mode=0777,dir_mode=0777,sec=ntlm,auto 0 0 #//192.168.1.97/media/3\040-\040My\040Pictures /home/xbmc/Pictures cifs credentials=/home/xbmc/.smbcredentials,rw,file_mode=0777,dir_mode=0777,sec=ntlm,auto #//192.168.1.97/media/XBMC /home/xbmc/Admin cifs credentials=/home/xbmc/.smbcredentials,rw,file_mode=0777,dir_mode=0777,sec=ntlm,auto Have seen a few things on the internet where it was believed its because the share isn't available yet (i.e. wifi not connected yet, etc) when it's attempting to mount. 1) Is there anyway to confirm that's the problem, 2) IF so, is there a solution? Is there some way to put a delay in fstab? Or how might i write a script to run mount -a a certain amount of time after boot? Found the option _netdev from a little research, included that in fstab but still the same result. Thanks for your help.

    Read the article

  • local install of wp site brought down from host - home page is ok but other pages redirect to wamp config page

    - by jeff
    local install of wp site brought down from host - home page is ok but other pages redirect to wamp config page. I got all local files from host to www dir under local wamp. I got database from host and loaded to new local db and used this tool to adjust site_on_web.com to "localhost/site_on_local" now the home page works great and can login to admin page but when click on reservations page and others of site then site just goes to the wamp server config page even though the url shows correctly as localhost/site_on_local/reservations my htaccess file is this # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress and rewrite-module is checked in the php-apache-apache modules setting. now when I uncheck the rewrite-module is checked in the php-apache-apache modules setting or I clear out the whole htaccess file then the pages just goto Not Found The requested URL /ritas041214/about-ritas/ was not found on this server. Please help as I am unsure now about my process to move local site up and down and be able to make it work and without this I am lost...

    Read the article

  • Uploading or attaching files that located on a shared drive doesn't work?

    - by Alex
    I have this odd, quite minor, but annoying issue that I am quite perplexed about. Whenever I try to upload a file via my browser(let's say attach a file to an email in GMail), I click 'Browse' button and it opens standard file selection dialog, that doesn't show network drives. Further more if I try to drag a file from a network drive into GMail, it doesn't work either, it just doesn't let me do that. This issue has been around for quite sometime now, and I am just curious if this is something on my side or if it's a bug or a misconfiguration of some sort. FWIW, I am currently running 10.10, network drive is a samba share on NAS. This happens in FF and Chrome and this is only happens with Samba mounts. As a matter of fact, NFS volumes that are located on the same network operate perfectly fine.

    Read the article

  • Cannot access personal website from home IP. More details inside.

    - by GX67
    This is a recent problem I've been having. My site can be accessed from almost everywhere else except from my home IP, where I do most of my editing/updating, etc. I've tested my connection from my school's network, a friend's connection from out of state (multiple states), and through a tethered connection with my friend's Android. It works in all those cases, both viewing, accessing the cPanel, and using FTP. Here's the problem that happens to me when I try to view it from my home IP: The page times out in Firefox, IE, and Chrome. Using the cmd, I ran tracert and ping, both as failed attempts. Log here. downforeveryoneorjustme.com says my site is up. So do the other site checkers. I can't access my cPanel or FTP accounts. I can't access the host site. (I use perfectz.info for hosting, and I can't access their site either.) System settings: No firewall enabled. Ports are seemingly properly forwarded. (e.g. The ports are open in the router settings, and are open everywhere else.) I have an email forwarder set up from the cPanel that works just fine. (i.e. I can receive emails sent to that address. If any other information is needed, I'll do my best to provide it. UPDATE @ilhan: I use two things: 1) The site cPanel from in-browser. 2) Dreamweaver CS5 FTP. @Matthias: I tested both, and it passes the dual stack with a 10/10. What should I do then?

    Read the article

  • Ask HTG: Disabling Windows Startup Programs, Using DNS Names on Your Home Network, and Restoring a Vintage Keyboard

    - by Jason Fitzpatrick
    Once  a week we round up some of the answers we’ve sent out to readers and share them with everyone. This week we’re looking at removing programs from the Windows startup routine, using DNS names on the local network, and restoring a vintage keyboard. HTG Explains: Do You Really Need to Defrag Your PC? Use Amazon’s Barcode Scanner to Easily Buy Anything from Your Phone How To Migrate Windows 7 to a Solid State Drive

    Read the article

  • have a missing file, and cant run ubuntu upon start up, and hasnt the flash drive i used didnt work either, any help?

    - by trent
    when I first downloaded Ubuntu to install it, it downloaded quick and caused no problems to my laptop. but then when it came time to install it as one of my operating systems, it wouldn't run because it said a file was missing or damaged. so then I uninstalled it and re-installed it but I still had that same problem. so I tried a flash-drive version but that didn't work either because it wouldn't boot from that, nor would it detect my flash drive, (in this case, an old 4 GB mp3 player). any help or tips and ideas would be great, I just need a decent operating system because windows is getting to be terrible at the moment, just note I wanna run Ubuntu along side windows 8.1

    Read the article

  • Ubuntu installer thinks my drive is empty, does not see windows paritions.

    - by John
    Hello, I am trying to install Ubuntu10.10 64bit. I just installed Windows 7 64bit moments ago. My drive is currently partitioned like so: 100MB Boot partition (automatically made by windows 7 installer) 390GB Windows partition ~1.6TB free space When I go through the Ubuntu installer it does not give me the option to install alongside another operating system. My only options are to use the entire disk or to specify partitions manually. When I chose to specify partitions manually it tells me that the drive is all free space! Windows is still booting and behaving normally, and I had not doing anything in Windows yet (had simply installed, booted for first time, then immediately restarted). I am even able to mount the windows partition within Ubuntu Live CD, and see it in the disk viewer (not gparted). Gparted in Ubuntu Live CD again reports no partitions, all free space. Not sure what to do :S. I have installed Windows7 alongside Ubuntu countless times, even Ubuntu 10.10. Thank you very much for your help :).

    Read the article

  • Why won't USB 3.0 external hard drive run at USB 3.0 speeds?

    - by jgottula
    I recently purchased a PCI Express x1 USB 3.0 controller card (containing the NEC USB 3.0 controller) with the intent of using a USB 3.0 external hard drive with my Linux box. I installed the card in an empty PCIe slot on my motherboard, connected the card to a power cable, strung a USB 3.0 cable between one of the new ports and my external HDD, and connected the HDD to a wall socket for power. Booting the system, the drive works 100% as intended, with the one exception of throughput: rather than using SuperSpeed 4.8 Gbps connectivity, it seems to be falling back to High Speed 480 Mbps USB 2.0-style throughput. Disk Utility shows it as a 480 Mbps device, and running a couple Disk Utility and dd benchmarks confirms that the drive fails to exceed ~40 MB/s (the approximate limit of USB 2.0), despite it being an SSD capable of far more than that. When I connect my USB 3.0 HDD, dmesg shows this: [ 3923.280018] usb 3-2: new high speed USB device using ehci_hcd and address 6 where I would expect to find this: [ 3923.280018] usb 3-2: new SuperSpeed USB device using xhci_hcd and address 6 My system was running on kernel 2.6.35-25-generic at the time. Then, I stumbled upon this forum thread by an individual who found that a bug, which was present in kernels prior to 2.6.37-rc5, could be the culprit for this type of problem. Consequently, I installed the 2.6.37-generic mainline Ubuntu kernel to determine if the problem would go away. It didn't, so I tried 2.6.38-rc3-generic, and even the 2.6.38 nightly from 2010.02.01, to no avail. In short, I'm trying to determine why, with USB 3.0 support in the kernel, my USB 3.0 drive fails to run at full SuperSpeed throughput. See the comments under this question for additional details. Output that might be relevant to the problem (when booting from 2.6.38-rc3): Relevant lines from dmesg: [ 19.589491] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.589512] xhci_hcd 0000:03:00.0: setting latency timer to 64 [ 19.589516] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 19.589623] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 12 [ 19.650492] xhci_hcd 0000:03:00.0: irq 17, io mem 0xf8100000 [ 19.650556] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X [ 19.650560] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X [ 19.650563] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X [ 19.653946] xHCI xhci_add_endpoint called for root hub [ 19.653948] xHCI xhci_check_bandwidth called for root hub Relevant section of sudo lspci -v: 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f8100000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd Relevant section of sudo lsusb -v: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.38-020638rc3-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:03:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Full, non-verbose lsusb: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 003: ID 04d9:0702 Holtek Semiconductor, Inc. Bus 009 Device 002: ID 046d:c068 Logitech, Inc. G500 Laser Mouse Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 006: ID 174c:5106 ASMedia Technology Inc. Bus 003 Device 004: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader) Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 006: ID 1687:0163 Kingmax Digital Inc. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 046d:081b Logitech, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Full output: full dmesg full lspci full lsusb

    Read the article

  • Uploading or attaching files that located on a shared drive doesn't work?

    - by Alex
    I have this odd, quite minor, but annoying issue that I am quite perplexed about. Whenever I try to upload a file via my browser(let's say attach a file to an email in GMail), I click 'Browse' button and it opens standard file selection dialog, that doesn't show network drives. Further more if I try to drag a file from a network drive into GMail, it doesn't work either, it just doesn't let me do that. This issue has been around for quite sometime now, and I am just curious if this is something on my side or if it's a bug or a misconfiguration of some sort. FWIW, I am currently running 10.10, network drive is a samba share on NAS. This happens in FF and Chrome and this is only happens with Samba mounts. As a matter of fact, NFS volumes that are located on the same network operate perfectly fine.

    Read the article

  • Google revoit ses capacités de stockage Cloud à la baisse et ses prix à la hausse, presque tous les utilisateurs de Drive concernés

    Cloud : Google revoit ses espaces de stockage à la baisse Et ses prix à la hausse, du pain bénit pour la concurrence ? Encore plus de « nettoyage de printemps » est à prévoir pour ses services en ligne, prévient Google. Il s'agit en fait d'un toilettage d'automne. Et autant le dire tout de suite, il n'est pas porteur de bonnes nouvelles pour les utilisateurs de Google Drive et de Picassa. Google annonce en effet que les capacités ces deux espaces de stockages « seront consolidées » et que la capacité totale gratuite sera désormais de 5 GB « pour les deux services ». Autrement dit, l'espace gratuit total perd 1 GB (- 16.5%) puisque auparavant Google Drive proposait déjà ces 5 ...

    Read the article

  • Have I lost my entire Windows drive and all the files?

    - by xiaohouzi79
    I previously had Heron 8.04 installed. Today I decided to upgrade. During the partition phase of the install of 10.10 it asked me what portion of the drive I should use. There were a few options: Drag the partition size to indicate what I wanted to use A button that said use entire partition A button that said use entire drive I selected use entire partition as the Windows partition did not appear on the screen I assumed this was just displaying the existing Ubuntu partition. After install I think I have wiped my entire Windows partition, I can't see it anywhere. I would appreciate some advice as to find if it really is gone forever (My stupidity I didn't back up my Windows partition which includes 3 years of baby photos).

    Read the article

  • How to build a dynamic grub on a usb-drive?

    - by 13east
    I would like to setup GRUB on a USB where it detects automatically the available OS installations on the machine that it is plugged into. This could be useful if you messed up your default GRUB menu on a computer and would like to boot into the machine w/out booting Live-OS. Or if you have multiple Live-OS installations on a USB-Drive and would like to add/remove different installations w/out needing to update grub manually. I know that Grub2 has a OS-prober feature that looks for other installations on the hard-drive, but will that work in either of the scenarios listed above?

    Read the article

  • Encrypted home with Ecryptfs - How to store the key file if i missed it on first boot?

    - by Abstaubaer
    I installed Ubuntu 12.04 with encrypted Home-directory. When I first booted I was given the option to store a key file to some Flash-drive (USB) or anything and there was a hint how to do it later. I wanted to do it later but now can't find where to find or how to generate the key file in any documentation. So whats the command, where's the file? Ecryptfs-manger only offers me to generate a new pair. Thanks a lot in advance

    Read the article

  • Hardware question; booting ubuntu off of USB flash drive?

    - by Kon
    I'm currently running ubuntu off of a USB 3.0 flash drive on my laptop, and I have another USB 3.0 flash drive I use for storing larger files that I need to access and whatnot. But the issue is that both of the usb 3.0 flash drives don't fit next to each other at all, so I'm forced to use another usb 2.0 port located in a different spot on my laptop. Now my question is that if I use a USB 3.0 hub will that slow my connections down at all? or cause some sort of interference? Another question I had which I was unable to find anywhere on the internet is if there was a USB 3.0 hub with more than one upstream connection? Thanks for your time!

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >