Search Results

Search found 5878 results on 236 pages for 'sim card'.

Page 183/236 | < Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >

• Blank screen after GRUB (64 bit) - cannot install Ubuntu

  - by peGGi

  My laptop's specs: Lenovo IdeaPad Z570 Intel Core i5-2410M @ 2.3Ghz 6 Gb RAM DDR3 640 Gb ATAPI Hard-disk Drive @ 5,200 RPM NVIDIA GeForce G520M with Optimus switching technology Broadcom 802.11n Network Adapter REALTEK soundcard Windows 7 Home Premium 64-bit I downloaded Ubuntu Studio 11.04 and burned the iso image onto two different DVDs, using two different programs (one DVD is RW, the other is just R). I verified the hash MD5sum thing. I get as far as GRUB with the 4 options (install, advanced install, disk verification, system rescue) but no matter which one I select, I get a blank screen and nothing happens. The DVD drive spins down after about 30 seconds. Also just before the GRUB screen I get a message saying Error: "Prefix" is not set. I'm not sure if that's relevant. I have tried all the options using both DVDs. Same thing happens. I have changed the graphics setting in BIOS to UMA or Optimus, but still happens either way. I've tried booting with the wireless switch turned off, same thing happens. I downloaded 'vanilla' Ubuntu 64-bit and burned onto a CD, and the same thing happens. I have downloaded Ubuntu 32-bit and I am able to boot from the live CD (interestingly the wireless card won't work, but that's maybe another issue). I have searched extensively through these forums and other sites but I can't see anything that will help me. Is there something I'm missing? I'd really appreciate help on this. The laptop is less than 2 weeks old. I was so looking forward to getting Ubuntu Studio up and running. I've gone about as far as my technical abilities will allow.

  Read the article

• Intel graphic chipset and NVIDIA Geforce GTX560

  - by antoine

  I have an NVIDIA Geforce GTX560 with two video projectors and I would like to use the onboard Intel Graphic Chipset to plug an additional monitor. I saw the question : How can I use both Intel onboard and Nvidia graphics at the same time? but the answer is so short that I was not convinced. My motherboard (GIGABYTE GA-H61M-D2P-B3 (rev. 1.0)) equipped with Intel H61 Chipset allow shared memory between onboard and PCIe cards. And Windows 7 allow me to use the three outputs thanks to Intel's driver. I'm able to use the onboard graphic card but without graphical interface for now. I think i need intel driver for that. But I would like to know if I can setup my displays in xorg.conf with something like : Section "Device" Identifier "Device0" Driver "intel" EndSection Section "Device" Identifier "Device1" Driver "nvidia" EndSection Section "Device" Identifier "Device2" Driver "nvidia" EndSection Does anyone have successfully setup something like that ? Or should I burn my head experimenting it by myself ? Or is there any good reasons to discouraged me to try ? Thanks for your help. Antoine PS : i'm using Ubuntu 10.10 for now, but I could switch to another version. PS2 : i also read this : Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10? which doesn't tell me more about the possibilities to use Intel Graphic and Nvidia at the same time EDIT : according to that : Can not get Dual Monitors to work on Different GPUs, I should be able to run two Xserver one on Intel the other on Nvidia. I will try and post the result here.

  Read the article

• Reverse WiFi to Broadcast connection coming from a USB device

  - by Daniel Clem

  I am using the app called Clockworkmod Tether. It connects using a script ( command line " gksu ./run.sh " ) on the computer. All my programs connect to the internet perfectly, minitube, midori, transmission torrents. But the network manager does not show any connection, wired or wireless. So this may cause issues? What I want to do is take this connection, and be able to share it some way, any way, by wireless. This Acer Timeline "Aspire 5810TZ" does have an Ethernet, so wired out to a router might be an option. But I would prefer to simply reverse the Wireless card to broadcast out to about 2 or 3 devices. Is this possible? Yes I have taken a look at the other questions already posted here, but the answers are 1 year old or older, and not clear at all. I am moderately comfortable (4.5 out of 10 ) on the command line. But pretty much need line by line directions for what commands are needed and what order, ect. Edit I have already tried the method of "Left click network manager, Create New Wireless Network" It is created fine, and I am able to connect to it with a tablet, but am un-able to get an outside connection with it. Using the "Shared to other computers" option because DHCP doesn't seem to work, and WEP Passphrase Security. I get an IP address on the connected device. But as I said, won't bring up any outside webpages or the like. So perhaps this is the wrong approach?

  Read the article

• SQL SERVER – Caption the Cartoon Contest – Last 2 Days

  - by pinaldave

  Developer’s life is very interesting, we often want to start my day early at a job so we can go home early. However, the day never comes as the life of the developer is always about working late hours. If the developer goes to the office early – there are good chances that his co-workers will come late. Additionally, I am confident that there will be always something urgent for developers or DBA to solve right at the time they are ready to go home. This is the life of the developers!  Here is the interesting story of a DBA who was about to go to the home. He had to take his girlfriend to a movie and dinner in 30 minutes. However, his manager asks him to fix the performance related issues with their production server. In normal case, he had only two choices a) Job or b) Girlfriend. Well, our super hero DBA decided to use efficient tools and improve the performance of the production server in merely 30 minutes. When he was done, his manager was absolutely surprised by his efficiency and accuracy of the work. He asked him following question - Here is the contest – you need to guess what was the answer of our Super Hero DBA. If you guess the answer correct you may win Star Wars R2-D2 Inflatable Remote Controlled device. Additionally, if you Download DB Optimizer before Dec 8, 2012 – you will be eligible for USD 25 Amazon Gift Card (there are total 10 such awards). Please do not leave comments in this thread – to participate in the contest – please leave a comment here in the original contest page. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Mouse doesn't work & internet connection not made in Ubuntu 12.04 LTS

  - by David Skare

  Yesterday, Nov 15, 2012, I booted into my Ubuntu 12.04 LTS system. It has resided on a Crucial 128 GB SSD with about 90% free space since early summer. I also have Windows 7 loaded on another Crucial 256 GB SSD. Ubuntu has set up a dual boot system for me even though each OS has its own SSD. I have been using this setup without problems since summer. Yesterday, when the boot process finished, my Microsoft Comfort Mouse 3000 did not work and there was a message that Ubuntu was not connected to the internet. So w/o the mouse I was forced to turn the machine off manually. About 4 days ago Ubuntu worked fine and booting into Win 7 also works fine. I have a backup machine with the same style mouse on it so I swapped the mouse onto this system. Same results. But both mice work when booting into Win 7. Today I removed both SSDs and installed my Ubuntu 12.04 HD which has not been used since I moved Ubuntu to the SSD from it. Same results. Between the last time I used Ubuntu 12.04 on the SSD and when I tried to use it again I made no changes to my machine, either hardware or software. My machines specs are: AMD FX-6100, MSI 990FXA-GD65 AM3+ format with latest BIOS (Ver 19.9), Corsair Vengeance 1866 MHz memory - 16 GB (4GB X 4 sticks), MSI N580GTX video card (nVidia 306.97 drivers), Sony Bravia 32" HD TV as a monitor, Pioneer BluRay DVD-RW, DSL connection to internet thru a router (10 mps), Crucial 128 GB SSD (90% free space), Microsoft Comfort Mouse 3000 I try to maintain current BIOS and drivers for all devices. I mostly use my Ubuntu system for programming in GCC and OpenCOBOL, surfing the internet and e-mailing. No games are installed. I'm stumped! If anyone has experienced this same problem I'd appreciate knowing how you solved it. TIA, Dave

  Read the article

• Unity 3D doesn't work on ubuntu 12.04 LTS in virtual box hosted by Windows 7 64bit

  - by Mario

  Can't google out the solution through some time so I'm asking here. I have installed Linux Ubuntu 12.04 LTS in virtual box hosted by Windows 7 64bit Simple my 3D stopped working after some kernel headers update<<< few months ago. Just like that. I don't member which version was it. In meantime there was 2 or 3 new releases of VirtualBox which I have installed. Every time I am updating VirtualBox Guest Additions to the newest version. My 3D in Ubuntu still doesn't work. root@pjadmin-VirtualBox:~# /usr/lib/nux/unity_support_test -p OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 2.1 Mesa 8.0.2 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no My graphics card in PC is ATI 6850. Please help.

  Read the article

• Radeon 9200 Driver?

  - by usuhh86

  I've been using Linux for a while, but haven't really done more than installed programs. I have Ubuntu 12.04 with an ATI Radeon 9200 graphics card. Ubuntu didn't recognize it during the install. All I want is a driver. Preferably the proprietary driver, but I'll settle for an open-source one if I need to. I went to the AMD support website, and whenever I click on the download link for "ATI Proprietary Linux x86 Display Driver 8.28.8" I get redirected to the main AMD website. I tried this on Firefox, Chrome, even booted up my netbook and tried it on IE9. Does anybody have a download link? And if not, a link to download an open-source alternative? Any help will be greatly appreciated. I'm pretty much still a newbie at this. OpenGL vendor string: Tungsten Graphics, Inc. OpenGL renderer string: Mesa DRI R200 (RV280 5961) x86/MMX/SSE2 TCL DRI2 OpenGL version string: 1.3 Mesa 8.0.2 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: no GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: no Unity 3D supported: no

  Read the article

• nvidia-settings makes one of my dual monitors grey and useless, disables network

  - by Kerrick

  I'm running Ubuntu 12.04 64-bit, Precise Pangolin, with a PNY GTS 250 1GB video card and a monitor plugged into each of the DVI ports. I'm using the proprietary drivers (post-release updates). If I set anything to do with Separate X Screens up in nvidia-settings (and write it to xorg.conf and reboot), my second monitor has a grey background, no menu bar, no ability to have a window on it, the second monitor doesn't get picked up in a screneshot, and if I move my mouse cursor to it it's an ugly black X. Plus, my network is unable to connect to anything. If I subsequently delete /etc/X11/xorg.conf and reboot, everything goes back to working, albeit with a single monitor activated. If I set anything to do with TwinView up in nvidia-settings, my second monitor starts working, but it isn't seen as a second monitor by Ubuntu, so I can't apply color calibration to it separately. Plus, my mouse gets "caught" between the monitors every time I try to move my cursor between the two. What gives? If it helps, this is the xorg.conf that nvidia-settings generates for Separate X Screens.

  Read the article

• Eris Update to 2.1 &ndash; No Problems

  - by Bunch

  I updated my Eris to Android’s 2.1 OS last night and everything went pretty well. I had wanted to update the phone mainly for two reasons. The first was to have the Navigation feature of the Google Maps application and to make YouTube work again. YouTube used to work on the phone and then stopped a few weeks ago. But before I started I looked around various forums and blogs to see what doom and gloom folks were talking about the update. Based on what I read and some common sense I used the following steps: Made sure there was a good charge on the phone. Connected to our WiFi (the download is about 77 megs, not very 3G friendly). Checked that the contacts were synced with the GMail account. As a precaution I copied off any music and pictures from the SD card to my laptop. Started the update process and waited for the download and installation to complete. It took maybe 30 minutes to do everything. After the update I re-synced the contacts and tested out the phone (it does make calls after all). I did need to download the text to speech application to get the Maps Navigation to work but that was easy enough since the application prompted me to download it. And now the YouTube application works again. Technorati Tags: Android

  Read the article

• Low graphic mode after switching to fglrx drivers

  - by MrKenkadze27

  I have another problem on my laptop after trying to fix another issue. So, because of this issue, I wanted to switch to fglrx to fix it and after restart, I got this screen: I went back to terminal and I got rid of this problem by "purge"-ing the fglrx driver and removing it, going back to problem number one. I tried lot of methods to fix this such as this ones but they ether switched back to open-source drivers or didn't helped at all. So would anyone like to help? maybe give some commends to try? My Laptop has 2 GPU, AMD Radeon HD 7650M and Intel(R) HD Graphics 4000. AMD is running always making my laptop too hot. Here's one of the Xorg.5.log file paste, I am sure it will be useful finding my problem. Thanks! Please make answer easy to understand as I am not an expert, this problem is keeping me from being one. Also the AMD driver which can be downloaded from their site doesn't install, it says non compatible graphics card but Ubuntu Software Updater sure installs it.

  Read the article

• Problems with Intel Video Resolution on Acer Laptop Wide Display

  - by ricstr

  I have an ACER Aspire 5332 laptop which I have just installed Ubuntu 12.04 x64, which is causing some issues with the video display on boot and video resolution. First and foremost, it will only boot past the purple screen if GRUB has been edited to replace 'quick splash' with 'nomodeset'. Secondly, once it has booted with the the 'nomodeset' option, it does not allow me to change the resolution higher or lower from 1024 x 786. Is it OK to use the 'nomodeset' for normal use? Will this compromise performance of other devices? The video card is an on-board one, integrated within the Intel GL40 chip-set. The display is a wide-screen LCD, and under Windows could operate under various resolutions. Ideally I would like it to operate on a resolution to fit the wide-screen display as it a bit stretched out at the moment, and less desktop space as I am used to. I believe the optimal resolution is 1366 x 768. Below is some information from the terminal which may be useful. ricstr@Aspire-5332:~$ lspci | grep -i VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) ricstr@Aspire-5332:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0*

  Read the article

• System in low-graphics mode

  - by Artem Moskalev

  I am totally new to Linux, and Ubuntu. I bought ASUS X53E Notebook, erased Windows and installed Ubuntu. First it worked ok. Then when I started working with it, i opened the terminal, entered sudo chmod 666 usr and then all the icons from the main panel disappeared + the whole system stopped responding. I decided to restart the system. When restarted, a message appears: the system is running in low graphics mode and below it: Your screen, graphics card and input device setting could not be detected correctly. You will need to configure it yourself. But the "OK" button is disabled and if I press any buttons nothing happens. If I enter Ctrl-Alt-F2 it opens the bash terminal. But there commands sudo or apt-get are not found and it says that permission denied if i try to enter any folder like cd /usr If I enter the su command it asks for the password I don't know. When encountering this problem first, I reinstalled the whole Ubuntu. but today it happened again just the same. What shall I do? maybe there is something wrong with the hardware? If I need to install another distribution of Linux could you recommend one? but I'd rather stick to Debian releases like Ubuntu. so how do I fix the problem? PS: Please give answers in simple terms because am a newbie so i don't know what goes where yet.

  Read the article

• Is there such thing as a "theory of system integration"?

  - by Jeff

  There is a plethora of different programs, servers, and in general technologies in use in organizations today. We, programmers, have lots of different tools at our disposal to help solve various different data, and communication challenges in an organization. Does anyone know if anyone has done an serious thinking about how systems are integrated? Let me give an example: Hypothetically, let's say I own a company that makes specialized suits a'la Iron Man. In the area of production, I have CAD tools, machining tools, payroll, project management, and asset management tools to name a few. I also have nice design space, where designers show off their designs on big displays, some touch, some traditional. Oh, and I also have one of these new fangled LEED Platinum buildings and it has number of different computer controlled systems, like smart window shutters that close when people are in the room, a HVAC system that adjusts depending on the number of people in the building, etc. What I want to know is if anyone has done any scientific work on trying to figure out how to hook all these pieces together, so that say my access control system is hooked to my payroll system, and my phone system allowing my never to swipe a time card, and to have my phone follow me throughout the building. This problem is also more than a technology challenge. Every technology implementation enables certain human behaviours, so the human must also be considered as a part of the system. Has anyone done any work in how effectively weave these components together? FYI: I am not trying to build a system. I want to know if anyone has thoroughly studied the process of doing a large integration project, how they develop their requirements, how they studied the human behaviors, etc.

  Read the article

• 12.0.4.3 - Missing Battery Icon, auto Suspend not working, Keyboard shortcuts volume up/down no longer working

  - by Navraj

  Problems I am experiencing: Battery Icon not showing up unity bar (top right corner). Volume Up/Down/Mute not working. Bluetooth hot keys described above also not working.Brightness up/down keys on this keyboard no longer working (apple wireless keyboard) Laptop no longer suspends when lid is shut. I have to go to 'power' button on top right corner and click on 'Suspend' All was working flawlessly until I did the following: I have recently upgraded to Nvidia propriety driver version 319 {version recommended}. Installed Xscreensaver and then removed it and went back to default screensaver. Done a system update (1st since installing) and now currently running: Linux 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:19:35 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux NOTE: Base system was ubuntu 12.04.3 installed from ISO however lsb_release reports "No LSB modules are available" 4.installed psensor. I have check power setting (via Settings) and power setting via dconf-editor and set to recommended settings as described in posts detailing solution to this problem. - I have disabled 1) Nvdia settings at startup and 2) psensor at startup but this does not help. I am using an HP DV7 with 2GB Nvidia card. Not using any fancy graphics features. Recommendations? Thanks.

  Read the article

• Is this a dual monitor reset bug?

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) A few minutes after I login to my dual monitor setup, it gets reset to mirror screens. If I restore the settings via the displays application, everything is fine. On each reset, the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset, /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like its interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

• If I install Ubuntu 12.04, will it recognize all of my RAM?

  - by user91048

  I have a question that's been bugging me since a long time. A friend of mine told me that when he had Ubuntu 11.10 installed the OS only recognized 3.4GB instead of 8GB. In the next week I'll be buying a new computer and I'll have 8GB of RAM, does the Video Card need to have it's own video memory for the OS to recognize the RAM entirely?. If you could give me some advise on how to configure my PC before I buy it it would be great. Thanks. Tengo una duda que me ronda de hace tiempo. Un amigo mio me comento que con ubuntu 11.10 tenia 8 gb de RAM y que solo le reconocia 3.4. Dentro de unos 5 dias me comprare un ordenador nuevo a base de componentes y voy a meterle 8 gb de RAM. ¿Hace falta que la tarjeta gráfica tenga Gb dedicados para que el sistema me reconozca la RAM entera? Si podeis darme algunos consejillos sobre como configurar el PC antes de comprarmelo para que ese problema no me pase, Muchisimas Gracias.

  Read the article

• How do you explain to an "agile" team that they still need to plan the software they write?

  - by user23157

  This week at work I got agiled yet again. Having gone through the standard agile, TDD, shared ownership, ad hoc development methodology of never planning anything beyond a few user stories on a piece of card, verbally chewing the cud over the technicallities of a 3rd party integration ad nauseam without ever doing any real thinking or due dilligence and architecturally coupling all production code to the first test that comes into anyone's head for the past few months we reach the end of a release cycle and lo and behold the main externally visible feature that we have been developing is too slow to use, buggy, becoming labyrinthinly complex and completely inflexible. During this process "spikes" were done but never documented and not a single architectural design was ever produced (there was no FS, so what the hell eh, if you don't know what you are developing, how can you plan or research it?) - the project passed from pair to pair, each of whom only ever focused on a single user story at a time and well the result was inevitable. To resolve this I went off the radar, went (the dreaded) waterfall, planned, coded and basically didn't swap off the pair and tried as much as I could to work alone - focusing on solid architecture and specifications rather than unit tests which will come later once everything is pinned down. The code is now much better and is actually totally usable, flexible and fast. Certain people seem to have really resented me doing this and have gone out of their way to sabotage my efforts (possibly unconsciously) because it goes against the holy process of agile. So how do you, as a developer, explain to the team that it is not "un-agile" to plan their work, and how do you fit planning into the agile process? (I'm not talking about the IPM; I'm talking about sitting down with a problem and sketching out an end-to-end design that says how a problem should be solved in sufficient detail that anyone who works on the problem knows what architecture and patterns they should be using and where the new code should integrate into existing code)

  Read the article

• Sound in Ubuntu 12.10 on Chromebook

  - by Paul Mennega

  I've got an HP Chromebook 14 that I've rooted and installed Ubuntu via Crouton (upgraded to 12.10) and most things are working nicely. One issue that I am having trouble solving relates to sound. I've got sound output that I can control via the individual app (e.g. Youtube), but when trying to control the volume via the built-in xfce4-mixer, I get the following error: GStreamer was unable to detect any sound devices. Some sound system specific GStreamer packages may be missing. It may also be a permissions problem. Opening a terminal, I can run the alsamixer and control the volume levels. It is reporting back that the card is CRAS. I'd love to be able to do it from XFCE and the built-in mixer. I've tried re-installing the GStreamer packages, but no luck. It seems like I am close but not sure where to go from here. On a maybe unrelated note, plugging headphones into the headphone jack in Ubuntu also does not stop the sound from coming from the speakers and nothing comes through the headphones. Switching back to ChromeOs, everything works as expected, so I think that it's a driver issue.

  Read the article

• How do I install 10.04 on a Vortex86DX embdedded system?

  - by mathematician1975

  I am trying to install Ubuntu on a Netcom NC-499 board that contains a Vortex86DX processor. The processor vendor claims support for Ubuntu 10.04 but I am having problems installing it. I am trying to install to a 8GB compact flash card attached to the board with an IDE connector, using a USB connection CD-Rom drive and a burned ISO image obtained from this link http://old-releases.ubuntu.com/releases/10.04.0/ubuntu-10.04.3-desktop-i386.iso . Installation proceeds up to the point of around 78% but during the stage where the installer informs me that it is "configuring apt", the installer terminates with a popup dialog containing the following "The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again." I have no idea what to do at this point. I am a Linux novice and I do not really know how to investigate the problems with the installation. I have configured the BIOS exactly according to how the vendor specifies and they assure me that this version is fully compatible with their hardware and yet I am unable to get a decent install. I am able to install Ubuntu 8.04 using exactly the same procedure successfully so I am sure there is no problem with my CD-Rom compatibility or the compact flash drive. Any help will be gratefully received.

  Read the article

• Setting up dual monitors, Xorg.conf issues

  - by JTS

  I just got a new computer (W520, Graphics card nVidia GF106 [Quadro 2000]) and installed ubuntu on it using wubi. I have everything working, so I wanted to set it up to be able to use two monitors with an extended screen. I figured I had to edit Xorg.conf, but the file didnt exist. So I tried to create it by booting in recovery mode, and executing Xorg -configure but I am getting these errors: (EE) Failed to load module "vmwgfx" (module does not exist, 0) (EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) [drm] No DRICreatedPCIBusID symbol Number of created screens does not match number of detected devices. Configuration failed. ddxSigGiveUp: Closing log Any idea how I can get Xorg -configure to work, so that I can have an xorg.conf file that I can edit to enable twinview? EDIT: Another way I could ask the same question to solve this problem is, why can't I boot with an xorg.conf file generated by nvidia-xconfig? Is there something in the generated xorg.conf file that might need editing?

  Read the article

• IIM Calcutta &ndash; EPBM14 &ndash; Campus Visit &ndash; Day 3 &ndash; Kali Temple, IS &amp; Strateg

  - by Ram Shankar Yadav

  Hey folks~ Today was one of the most happening day for us, we got up @ 5 AM and did our daily morning chores and left hostel room by 5:35 AM. So why we got up so early??? Okay we planned a visit to Kali Temple at KaliGhat! So till everyone assembles, we took few pics on the Lake Deck. We left Joka campus at 6 AM and reached Kali temple at 6:50 AM. Kali temple is very famous in Kolkata, but the frankly speaking it’s one of the most unorganised one for sure~! After darshan, we got back into our Taxis and headed for breakfast at Gupta Brothers Restaurant. We enjoyed “doodh-jalebi”, “Kachori-sabzi” and rasogullas there~! While coming back, one of our Taxi’s excel broken and we waited for the first to come back and take us to Campus. After coming back to campus, we attended our sessions on IS & Strategy on ITC eChaupal and Transactional Cost and Vertical Integration(TCVI). After our classed we had “Dinner Party” organised by IIMC, and we enjoyed it thoroughly, and many of us took this as an opportunity to share our biz card and talk to Professors. Overall it’s was a rocking day!! Stay tuned for more… Cheers, ram :)   Photo Album :

  Read the article

• How to install nvidia drivers (GT 440 ) on Xubuntu 12.10 , screen res gone to 640x480 :(

  - by shaggyjack

  Hi all after days of endless googling I finally gave in and decided to try and directly ask for help. I have just installed Xubuntu and updated to 12.10 on a pretty old (12 years) machine, and I am now struggling to install the correct drivers for the nvidia 440 gt card.. I have managed to get "additional drivers" but the app does not show in the menu, I went through a few procedures which ended up in my screen going no higher than 640x480, and tried all the sudo apt-get variations with nvidia-current and current updates... I think I got the right version of the drivers ( 93.43.07 ) but they won't install from terminal as they say I am running an X server. So I learnt how to shut the graphic interface but then I try and install them from there but after I write the exact same command (sudo home/username/Downloads/NVIDIA-Linux-x86-96.43.07.pkg1.run ) nothing happens and the terminal says something like command not found. I am desperate for help if anybody could point me in the right direction that would be greatly appreciated. There are lots of similar topics on installing nvidia drivers but I seem to understand that current drivers are no good for my old GPU. So if anybody could show me how to install the right version that would be excellent. Thanks in advance! Jack

  Read the article

• Can't shutdown Ubuntu (Wubi Installation)

  - by zsgre3nd3s7

  I downloaded Ubuntu 12.04 using Wubi. The installation went correctly and everything was working fine until I tried to shutdown. I clicked shutdown and then Ubuntu started shutdown, but as soon as I saw the Ubuntu logo with blank dots under, it froze. I had to perform a hard shutdown. After booting my computer back and going into Ubuntu, I tried shutting it down again but this time it took me on a black page with lots and lots of log writing on the screen and after a little while, it stopped writing stuff. I was able to input characters using the keyboard and everything, but it never shutdown. I had to perform a hard shutdown again. Now it always gives me a Ubuntu logo and freezes. What should I do? I know hard shutdowns are bad and want to avoid them. Is there anyway to make shutdowns work? I tried a reboot and it also froze on the Ubuntu logo. Sony VAIO Model E SVE17115FDB Laptop. Graphic card - AMD RADEON HD 7650M (and it installed correctly in Ubuntu). BIOS - H2O Bios. Processor - Intel i7-3612QM. Edit: I only installed the AMD/ATI proprietary drivers FGLRX, not the AMD/ATI post release drivers because they keep showing an error message. Here is jockey.log. Edit 2: Here is the log that i mentioned before that appeared on my screen, it appeared after i tried reinstalling my AMD driver but failed so i reinstalled the other one. Sorry for the quality i took those pictures with my phone.

  Read the article

• Resolution stuck in 640x480 in grub, 11.04 and 12.04

  - by user89797

  I have three operating systems on my machine, Windows 7x64, Ubuntu 11.10 and 12.04 both x64 as well. All three were running at full resolution for my monitor, as well as in the Grub 1.99 boot screen. After booting into Windows, I rebooted my machine and found my Grub resolution was suddenly 640x480. Booting into both versions of Ubuntu, I find myself stuck at that resolution as well. I made no driver changes recently, and hadn't even booted into the 11.10 build in a month or more. I've gone through both proprietary Nvidia driver options for my card (GeForce 9800GT) as well as the open source drivers in 12.04 to no avail. I can't figure out what could have caused this change in both versions of Ubuntu and Grub simultaneously. Windows 7 is unaffected so I think that safely rules out hardware failure. EDIT Ok, so I couldn't boot an graphical live disks, I tried ubuntu 12.04 i386 and x64 as well as 12.10 beta x64 and all of them would flash the initial logo, go to a blank screen with a flashing cursor in the upper left and then my display would die. I managed to boot 12.04 server and get into recovery. I reinstalled grub and went into recovery mode for my 12.04 build. If I boot in safe graphics mode I can get 1280x768, but as soon as I reboot it's broken again. I've tried reinstalling the nvidia drivers and that leaves me with a system stuck at max 640x480. None of these changes have had any impact on the 11.10 build, which is still stuck at 640x480 Given that I can push a somewhat higher resolution in 12.04, and full resolution in windows 7 I'm pretty convinced it's not an issue of my monitor failing. It must be something to do with the graphics drivers. I can't figure out what could be the issue though. I'm especially perplexed that I can't boot any live images

  Read the article

• Intermittent ethernet connectivity

  - by Amey Jah

  I am facing a weird problem. I am connecting to my dsl modem via ethernet. After booting, sometimes Ubuntu 10.10 does not detect the eth0 card properly or does not connect to the modem. I have made the following observations: My modem is fully on. All indicators are on except ethernet, which is blinking continuously. My network indicator applet informs me that I am connected to modem, but I am not able to browse as it has not established connection with modem. I need to power off and on (restart) the modem several times OR disconnect/connect (via network applet) several times, before the system can establish a connection with the modem. Once it establishes the connection, the ethernet LED (on modem) stops blinking and glows continuously. However, I do not see this problem every time I reboot or start my computer. 3/5 time, it connects to the modem in a single attempt. Friends, I am not able to understand root cause of this problem. Plus I do not know what kind of logs should be attached. If you want any logs please give me command to run, and I will paste the result for you. Note: I ran system testing when above problem happened. Follow this link to download result.

  Read the article

< Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >