Search Results

Search found 6580 results on 264 pages for 'boost foreach'.

Page 184/264 | < Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >

• How can I solve this SAT edge case?

  - by ssb

  I have an SAT implementation that basically works, and the fact that it works is what's giving me a few headaches. Basically there are some situations where using the SAT doesn't quite give me my intended result. One of these involves movement across multiple collision objects. Or to put it another way, if I have several collision boxes lined up next to each other such as to create something like a wall or a floor, movement along that surface while constantly applying force into that surface sometimes causes hangups, i.e. the player stops moving. This illustration shows what I mean: The 2 boxes on the bottom represent a floor, and the box on top/in the middle represents what my player is doing. There are several squares lined up as world obstacles to create some kind of wall, and if I move to the left across this surface while holding the down key then the issue arises. It only happens at the exact dividing point between two blocks. It only happens when moving to the left. At any rate I think I know why it happens, but I don't know how to solve it. Basically when I update my player movement I consider which directions are pressed, naturally, so if down is pressed I will add the speed to the Y component, and so on. But due to the way my SAT is implemented, when the penetration into the shape is the same from both sides it just goes with the smallest axis that it finds first, and it checks collisions against objects in the order that they were created because it goes through a foreach loop on the list of collidable objects. So this all adds up to the effect of if I'm moving to the left over a series of boxes while holding down, it will resolve me back to the right out of the first box and then up out of the box to the right of it, and this continues as long as the penetration is the same. The odd part is that this doesn't happen every time, which I am going to attribute to some oddity regarding multiplying velocity by the game time and causing some minor discrepancies between the lengths. Ultimately what this boils down to is that it will keep resolving me to the right and up, but this is technically expected behavior. All the solutions I can think of only address the symptoms of this problem and not the actual cause, such as not using many blocks to create walls or shapes, which is an option I'd like to keep open. I could also change which axis my algorithm defaults to, but that would just cause problems when going up/down along the walls. What can I do to fix this?

  Read the article

• RemoveAll Dictionary Extension Method

  - by João Angelo

  Removing from a dictionary all the elements where the keys satisfy a set of conditions is something I needed to do more than once so I implemented it as an extension method to the IDictionary<TKey, TValue> interface. Here’s the code: public static class DictionaryExtensions { /// <summary> /// Removes all the elements where the key match the conditions defined by the specified predicate. /// </summary> /// <typeparam name="TKey"> /// The type of the dictionary key. /// </typeparam> /// <typeparam name="TValue"> /// The type of the dictionary value. /// </typeparam> /// <param name="dictionary"> /// A dictionary from which to remove the matched keys. /// </param> /// <param name="match"> /// The <see cref="Predicate{T}"/> delegate that defines the conditions of the keys to remove. /// </param> /// <exception cref="ArgumentNullException"> /// dictionary is null /// <br />-or-<br /> /// match is null. /// </exception> /// <returns> /// The number of elements removed from the <see cref="IDictionary{TKey, TValue}"/>. /// </returns> public static int RemoveAll<TKey, TValue>( this IDictionary<TKey, TValue> dictionary, Predicate<TKey> match) { if (dictionary == null) throw new ArgumentNullException("dictionary"); if (match == null) throw new ArgumentNullException("match"); var keysToRemove = dictionary.Keys.Where(k => match(k)).ToList(); if (keysToRemove.Count == 0) return 0; foreach (var key in keysToRemove) { dictionary.Remove(key); } return keysToRemove.Count; } }

  Read the article

• Applying Quotas Across all My Sites

  - by Bil Simser

  Just a quick snippet this morning. If you need to apply a new quota template to all users My Sites here's a quick script to do it. Changing an existing quota is fine but if you're migrating users from another system or you just want to up everyone's storage a bit here's what you do. Create a new quota template. This is found in Central Admin under Application Management | Site Collections | Specify quota templates. There's already a default "Individual Quota" created you might want to create your own or have a special one for your users Open up the PowerShell Management Console and enter "Get-SPWebApplication". This will list all your web applications on the farm.  To apply it to all My Sites (each site is a site collection of its own) run this script below. .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: Consolas, "Courier New", Courier, Monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 1: $webapps = Get-SPWebApplication; 2:   3: $webapp = $webapps[4]; 4:   5: foreach ($site in $webapp.Sites) { 6: Set-SPSite -Identity $site.url -QuotaTemplate "Your Quota Template" 7: } The first line gets all the web applications on the server. In our case, the forth one is the mysite web app (yours will probably be a different number). Just run Get-SPWebApplication from the console to figure out which one to use. You could get fancy and pipe the name to find it but I'm too lazy for that.Then we loop through all the sites on the list using the $site.url property and pass it to the Set-SPSite cmdlet and specify the name of the our custom QuotaTemplate.Easy. Now all users are updated with the new quota template.

  Read the article

• How to join two collections with LINQ

  - by JustinGreenwood

  Here is a simple and complete example of how to perform joins on two collections with LINQ. I wrote it for a friend to show him, in one simple file, the power of LINQ queries and anonymous objects. In the file below, there are two simple data classes defined: Person and Item. In the beginning of the main method, two collections are created. Note that the Item's OwnerId field reference the PersonId of a Person object. The effect of the LINQ query below is equivalent to a SQL statement looking like this: select Person.PersonName as OwnerName, Item.ItemName as OwnedItem from Person inner join Item on Item.OwnerId = Person.PersonId order by Item.ItemName desc; using System; using System.Collections.Generic; using System.Linq; namespace LinqJoinAnonymousObjects { class Program { class Person { public int PersonId { get; set; } public string PersonName { get; set; } } class Item { public string ItemName { get; set; } public int OwnerId { get; set; } } static void Main(string[] args) { // Create two collections: one of people, and another with their possessions. var people = new List<Person> { new Person { PersonId=1, PersonName="Justin" }, new Person { PersonId=2, PersonName="Arthur" }, new Person { PersonId=3, PersonName="Bob" } }; var items = new List<Item> { new Item { OwnerId=1, ItemName="Armor" }, new Item { OwnerId=1, ItemName="Book" }, new Item { OwnerId=2, ItemName="Chain Mail" }, new Item { OwnerId=2, ItemName="Excalibur" }, new Item { OwnerId=3, ItemName="Bubbles" }, new Item { OwnerId=3, ItemName="Gold" } }; // Create a new, anonymous composite result for person id=2. var compositeResult = from p in people join i in items on p.PersonId equals i.OwnerId where p.PersonId == 2 orderby i.ItemName descending select new { OwnerName = p.PersonName, OwnedItem = i.ItemName }; // The query doesn't evaluate until you iterate through the query or convert it to a list Console.WriteLine("[" + compositeResult.GetType().Name + "]"); // Convert to a list and loop through it. var compositeList = compositeResult.ToList(); Console.WriteLine("[" + compositeList.GetType().Name + "]"); foreach (var o in compositeList) { Console.WriteLine("\t[" + o.GetType().Name + "] " + o.OwnerName + " - " + o.OwnedItem); } Console.ReadKey(); } } } The output of the program is below: [WhereSelectEnumerableIterator`2] [List`1] [<>f__AnonymousType1`2] Arthur - Excalibur [<>f__AnonymousType1`2] Arthur - Chain Mail

  Read the article

• Creating SharePoint sites from xml using Powershell

  - by Norgean

  It is frequently useful to create / delete web applications in a development environment. If you need to create a structure, this can quickly become tedious. Enter Powershell, xml and recursive functions. Create the structure in xml. Something like: <Sites>     <Site Name="Test 1" Url="Test1" />     <Site Name="Test 2" Url="Test2" >         <Site Name="Test 2 1" Url="Test21" >             <Site Name="Test 2 1 1" Url="Test211" />             <Site Name="Test 2 1 2" Url="Test212" />         </Site>     </Site>     <Site Name="Test 3" Url="Test3" >         <Site Name="Test 3 1" Url="Test31" />         <Site Name="Test 3 2" Url="Test32" />         <Site Name="Test 3 3" Url="Test33" >             <Site Name="Test 3 3 1" Url="Test331" />             <Site Name="Test 3 3 2" Url="Test332" />         </Site>         <Site Name="Test 3 4" Url="Test34" />     </Site> </Sites> Read this structure in Powershell, and recursively create the sites. Oh, and have cool progress dialogs, too. $snap = Get-PSSnapin | Where-Object { $_.Name -eq "Microsoft.SharePoint.Powershell" } if ($snap -eq $null) {     Add-PSSnapin "Microsoft.SharePoint.Powershell" } function CreateSites($baseUrl, $sites, [int]$progressid) {     $sitecount = $sites.ChildNodes.Count     $counter = 0     foreach ($site in $sites.Site)     {         Write-Progress -ID $progressid -Activity "Creating sites" -status "Creating $($site.Name)" -percentComplete ($counter / $sitecount*100)         $counter = $counter + 1         Write-Host "Creating $($site.Name) $($baseUrl)/$($site.Url)"         New-SPWeb -Url "$($baseUrl)/$($site.Url)" -AddToQuickLaunch:$false -AddToTopNav:$false -Confirm:$false -Name "$($site.Name)" -Template "STS#0" -UseParentTopNav:$true         if ($site.ChildNodes.Count -gt 0)         {             CreateSites "$($baseUrl)/$($site.Url)" $site ($progressid +1)         }         Write-Progress -ID $progressid -Activity "Creating sites" -status "Creating $($site.Name)" -Completed     } } # read an xml file $xml = [xml](Get-Content "C:\Projects\Powershell\sites.xml") $xml.PreserveWhitespace = $false CreateSites "http://$($env:computername)" $xml.Sites 1 Easy! Sensible real life implementations will also include templateid in the xml, will check for existence of a site before creating it, etc.

  Read the article

• Strange rendering in XNA/Monogame

  - by Gerhman

  I am trying to render G-Code generated for a 3d-printer as the printed product by reading the file as line segments and the drawing cylinders with the diameter of the filament around the segment. I think I have managed to do this part right because the vertex I am sending to the graphics device appear to have been processed correctly. My problem I think lies somewhere in the rendering. What basically happens is that when I start rotating my model in the X or Y axis then it renders perfectly for half of the rotation but then for the other half it has this weird effect where you start seeing through the outer filament into some of the shapes inside. This effect is the strongest with X rotations though. Here is a picture of the part of the rotation that looks correct: And here is one that looks horrible: I am still quite new to XNA and/Monogame and 3d programming as a whole. I have no idea what could possibly be causing this and even less of an idea of what this type of behavior is called. I am guessing this has something to do with rendering so have added the code for that part: protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.Black); basicEffect.World = world; basicEffect.View = view; basicEffect.Projection = projection; basicEffect.VertexColorEnabled = true; basicEffect.EnableDefaultLighting(); GraphicsDevice.SetVertexBuffer(vertexBuffer); RasterizerState rasterizerState = new RasterizerState(); rasterizerState.CullMode = CullMode.CullClockwiseFace; rasterizerState.ScissorTestEnable = true; GraphicsDevice.RasterizerState = rasterizerState; foreach (EffectPass pass in basicEffect.CurrentTechnique.Passes) { pass.Apply(); GraphicsDevice.DrawPrimitives(PrimitiveType.TriangleList, 0, vertexBuffer.VertexCount); } base.Draw(gameTime); } I don't know if it could be because I am shading something that does not really have a texture. I am using this custom vertex declaration I found on some tutorial that allows me to store a vertex with a position, color and normal: public struct VertexPositionColorNormal { public Vector3 Position; public Color Color; public Vector3 Normal; public readonly static VertexDeclaration VertexDeclaration = new VertexDeclaration ( new VertexElement(0, VertexElementFormat.Vector3, VertexElementUsage.Position, 0), new VertexElement(sizeof(float) * 3, VertexElementFormat.Color, VertexElementUsage.Color, 0), new VertexElement(sizeof(float) * 3 + 4, VertexElementFormat.Vector3, VertexElementUsage.Normal, 0) ); } If any of you have ever seen this type of thing please help. Also, if you think that the problem might lay somewhere else in my code then please just request what part you would like to see in the comments section.

  Read the article

• Export all SSIS packages from msdb using Powershell

  - by jamiet

  Have you ever wanted to dump all the SSIS packages stored in msdb out to files? Of course you have, who wouldn’t? Right? Well, at least one person does because this was the subject of a thread (save all ssis packages to file) on the SSIS forum earlier today. Some of you may have already figured out a way of doing this but for those that haven’t here is a nifty little script that will do it for you and it uses our favourite jack-of-all tools … Powershell!!   Imagine I have the following package folder structure on my Integration Services server (i.e. in [msdb]): There are two packages in there called “20110111 Chaining Expression components” & “Package”, I want to export those two packages into a folder structure that mirrors that in [msdb]. Here is the Powershell script that will do that:   Param($SQLInstance = "localhost") #####Add all the SQL goodies (including Invoke-Sqlcmd)##### add-pssnapin sqlserverprovidersnapin100 -ErrorAction SilentlyContinue add-pssnapin sqlservercmdletsnapin100 -ErrorAction SilentlyContinue cls $Packages = Invoke-Sqlcmd -MaxCharLength 10000000 -ServerInstance $SQLInstance -Query "WITH cte AS ( SELECT cast(foldername as varchar(max)) as folderpath, folderid FROM msdb..sysssispackagefolders WHERE parentfolderid = '00000000-0000-0000-0000-000000000000' UNION ALL SELECT cast(c.folderpath + '\' + f.foldername as varchar(max)), f.folderid FROM msdb..sysssispackagefolders f INNER JOIN cte c ON c.folderid = f.parentfolderid ) SELECT c.folderpath,p.name,CAST(CAST(packagedata AS VARBINARY(MAX)) AS VARCHAR(MAX)) as pkg FROM cte c INNER JOIN msdb..sysssispackages p ON c.folderid = p.folderid WHERE c.folderpath NOT LIKE 'Data Collector%'" Foreach ($pkg in $Packages) { $pkgName = $Pkg.name $folderPath = $Pkg.folderpath $fullfolderPath = "c:\temp\$folderPath\" if(!(test-path -path $fullfolderPath)) { mkdir $fullfolderPath | Out-Null } $pkg.pkg | Out-File -Force -encoding ascii -FilePath "$fullfolderPath\$pkgName.dtsx" }   To run it simply change the “localhost” parameter of the server you want to connect to either by editing the script or passing it in when the script is executed. It will create the folder structure in C:\Temp (which you can also easily change if you so wish – just edit the script accordingly). Here’s the folder structure that it created for me: Notice how it is a mirror of the folder structure in [msdb]. Hope this is useful! @Jamiet

  Read the article

• Why is my class worse than the hierarchy of classes in the book (beginner OOP)?

  - by aditya menon

  I am reading this book. The author is trying to model a lesson in a college. The goal is to output the Lesson Type (Lecture or Seminar), and the Charges for the lesson depending on whether it is a hourly or fixed price lesson. So the output should be: lesson charge 20. Charge type: hourly rate. lesson type seminar. lesson charge 30. Charge type: fixed rate. lesson type lecture. When the input is as follows: $lessons[] = new Lesson('hourly rate', 4, 'seminar'); $lessons[] = new Lesson('fixed rate', null, 'lecture'); I wrote this: class Lesson { private $chargeType; private $duration; private $lessonType; public function __construct($chargeType, $duration, $lessonType) { $this->chargeType = $chargeType; $this->duration = $duration; $this->lessonType = $lessonType; } public function getChargeType() { return $this->getChargeType; } public function getLessonType() { return $this->getLessonType; } public function cost() { if($this->chargeType == 'fixed rate') { return "30"; } else { return $this->duration * 5; } } } $lessons[] = new Lesson('hourly rate', 4, 'seminar'); $lessons[] = new Lesson('fixed rate', null, 'lecture'); foreach($lessons as $lesson) { print "lesson charge {$lesson->cost()}."; print " Charge type: {$lesson->getChargeType()}."; print " lesson type {$lesson->getLessonType()}."; print "<br />"; } But according to the book, I am wrong (I am pretty sure I am, too). The author gave a large hierarchy of classes as the solution instead. In a previous chapter, the author stated the following 'four signposts' as the time when I should consider changing my class structure: Code Duplication The Class Who Knew Too Much About His Context The Jack of All Trades - Classes that try to do many things Conditional Statements The only problem I can see is Conditional Statements, and that too in a vague manner - so why refactor this? What problems do you think might arise in the future that I have not foreseen?

  Read the article

• Unexpected advantage of Engineered Systems

  - by user12244672

  It's not surprising that Engineered Systems accelerate the debugging and resolution of customer issues. But what has surprised me is just how much faster issue resolution is with Engineered Systems such as SPARC SuperCluster. These are powerful, complex, systems used by customers wanting extreme database performance, app performance, and cost saving server consolidation. A SPARC SuperCluster consists or 2 or 4 powerful T4-4 compute nodes, 3 or 6 extreme performance Exadata Storage Cells, a ZFS Storage Appliance 7320 for general purpose storage, and ultra fast Infiniband switches.  Each with its own firmware. It runs Solaris 11, Solaris 10, 11gR2, LDoms virtualization, and Zones virtualization on the T4-4 compute nodes, a modified version of Solaris 11 in the ZFS Storage Appliance, a modified and highly tuned version of Oracle Linux running Exadata software on the Storage Cells, another Linux derivative in the Infiniband switches, etc. It has an Infiniband data network between the components, a 10Gb data network to the outside world, and a 1Gb management network. And customers can run whatever middleware and apps they want on it, clustered in whatever way they want. In one word, powerful.  In another, complex. The system is highly Engineered.  But it's designed to run general purpose applications. That is, the physical components, configuration, cabling, virtualization technologies, switches, firmware, Operating System versions, network protocols, tunables, etc. are all preset for optimum performance and robustness. That improves the customer experience as what the customer runs leverages our technical know-how and best practices and is what we've tested intensely within Oracle. It should also make debugging easier by fixing a large number of variables which would otherwise be in play if a customer or Systems Integrator had assembled such a complex system themselves from the constituent components.  For example, there's myriad network protocols which could be used with Infiniband.  Myriad ways the components could be interconnected, myriad tunable settings, etc. But what has really surprised me - and I've been working in this area for 15 years now - is just how much easier and faster Engineered Systems have made debugging and issue resolution. All those error opportunities for sub-optimal cabling, unusual network protocols, sub-optimal deployment of virtualization technologies, issues with 3rd party storage, issues with 3rd party multi-pathing products, etc., are simply taken out of the equation. All those error opportunities for making an issue unique to a particular set-up, the "why aren't we seeing this on any other system ?" type questions, the doubts, just go away when we or a customer discover an issue on an Engineered System. It enables a really honed response, getting to the root cause much, much faster than would otherwise be the case. Here's a couple of examples from the last month, one found in-house by my team, one found by a customer: Example 1: We found a node eviction issue running 11gR2 with Solaris 11 SRU 12 under extreme load on what we call our ExaLego test system (mimics an Exadata / SuperCluster 11gR2 Exadata Storage Cell set-up).  We quickly established that an enhancement in SRU12 enabled an 11gR2 process to query Infiniband's Subnet Manager, replacing a fallback mechanism it had used previously.  Under abnormally heavy load, the query could return results which were misinterpreted resulting in node eviction.  In several daily joint debugging sessions between the Solaris, Infiniband, and 11gR2 teams, the issue was fully root caused, evaluated, and a fix agreed upon.  That fix went back into all Solaris releases the following Monday.  From initial issue discovery to the fix being put back into all Solaris releases was just 10 days. Example 2: A customer reported sporadic performance degradation.  The reasons were unclear and the information sparse.  The SPARC SuperCluster Engineered Systems support teams which comprises both SPARC/Solaris and Database/Exadata experts worked to root cause the issue.  A number of contributing factors were discovered, including tunable parameters.  An intense collaborative investigation between the engineering teams identified the root cause to a CPU bound networking thread which was being starved of CPU cycles under extreme load.  Workarounds were identified.  Modifications have been put back into 11gR2 to alleviate the issue and a development project already underway within Solaris has been sped up to provide the final resolution on the Solaris side.  The fixed SPARC SuperCluster configuration greatly aided issue reproduction and dramatically sped up root cause analysis, allowing the correct workarounds and fixes to be identified, prioritized, and implemented.  The customer is now extremely happy with performance and robustness.  Since the configuration is common to other customers, the lessons learned are being proactively rolled out to other customers and incorporated into the installation procedures for future customers.  This effectively acts as a turbo-boost to performance and reliability for all SPARC SuperCluster customers.  If this had occurred in a "home grown" system of this complexity, I expect it would have taken at least 6 months to get to the bottom of the issue.  But because it was an Engineered System, known, understood, and qualified by both the Solaris and Database teams, we were able to collaborate closely to identify cause and effect and expedite a solution for the customer.  That is a key advantage of Engineered Systems which should not be underestimated.  Indeed, the initial issue mitigation on the Database side followed by final fix on the Solaris side, highlights the high degree of collaboration and excellent teamwork between the Oracle engineering teams.  It's a compelling advantage of the integrated Oracle Red Stack in general and Engineered Systems in particular.

  Read the article

• Playing with F#

  - by mroberts

  Project Euler is a awesome site.   When working with a new language it can be tricky to find problems that need solving, that are more complex than "Hello World" and simpler than a full blown application. Project Euler gives use just that, cool and thought provoking problems that usually don't take days to solve.  I've solved a number of questions with C# and some with Java.  BTW, I used Java because it had BigInteger support before .Net. A couple weeks ago, back when winter had a firm grip on Columbus, OH, I began playing (researching) with F#.  I began with Problem #1 from Project Euler.  I started by looking at my solution in C#. Here is my solution in C#. 1: using System; 2: using System.Collections.Generic; 3:   4: namespace Problem001 5: { 6: class Program 7: { 8: static void Main(string[] args) 9: { 10: List<int> values = new List<int>(); 11:   12: for (int i = 1; i < 1000; i++) 13: { 14: if (i % 3 == 0 || i % 5 == 0) 15: values.Add(i); 16: } 17: int total = 0; 18:   19: values.ForEach(v => total += v); 20:   21: Console.WriteLine(total); 22: Console.ReadKey(); 23: } 24: } 25: }   Now, after much tweaking and learning, here is my solution in F#.   1: open System 2:   3: let calc n = 4: [1..n] 5: |> List.map (fun x -> if (x % 3 = 0 || x % 5 = 0) then x else 0) 6: |> List.sum 7:   8: let main() = 9: calc 999 10: |> printfn "result = %d" 11: Console.ReadKey(true) |> ignore 12:   13: main() Just this little example highlights some cool things about F#. Type inference. F# infers the type of a value.  In the C# code above we declare a number of variables, the list, and a couple ints.  F# does not require this, it infers the calc (a function) accepts a int and returns a int. Great built in functionality for Lists.  List.map for example. BTW, I don’t think I’m spilling the beans by giving away the code for Problem 1.  It by far is the easiest question, IMHO, solved by 92,000+ people. Next I’ll look into writing a class library with F#.

  Read the article

• On Reflector Pricing

  - by Nick Harrison

  I have heard a lot of outrage over Red Gate's decision to charge for Reflector. In the interest of full disclosure, I am a fan of Red Gate. I have worked with them on several usability tests. They also sponsor Simple Talk where I publish articles. They are a good company. I am also a BIG fan of Reflector. I have used it since Lutz originally released it. I have written my own add-ins. I have written code to host reflector and use its object model in my own code. Reflector is a beautiful tool. The care that Lutz took to incorporate extensibility is amazing. I have never had difficulty convincing my fellow developers that it is a wonderful tool. Almost always, once anyone sees it in action, it becomes their favorite tool. This wide spread adoption and usability has made it an icon and pivotal pillar in the DotNet community. Even folks with the attitude that if it did not come out of Redmond then it must not be any good, still love it. It is ironic to hear everyone clamoring for it to be released as open source. Reflector was never open source, it was free, but you never were able to peruse the source code and contribute your own changes. You could not even use Reflector to view the source code. From the very beginning, it was never anyone's intention for just anyone to examine the source code and make their own contributions aside from the add-in model. Lutz chose to hand over the reins to Red Gate because he believed that they would be able to build on his original vision and keep the product viable and effective. He did not choose to make it open source, hoping that the community would be up to the challenge. The simplicity and elegance may well have been lost with the "design by committee" nature of open source. Despite being a wonderful and beloved tool, Reflector cannot be an easy tool to maintain. Maybe because it is so wonderful and beloved, it is even more difficult to maintain. At any rate, we have high expectations. Reflector must continue to be able to reasonably disassemble every language construct that the framework and core languages dream up. We want it to be fast, and we also want it to continue to be simple to use. No small order. Red Gate tried to keep the core product free. Sadly there was not enough interest in the Pro version to subsidize the rest of the expenses. $35 is a reasonable cost, more than reasonable. I have read the blog posts and forum posts complaining about the time associated with getting the expense approved. I have heard people complain about the cost being unreasonable if you are a developer from certain countries. Let's do the math. How much of a productivity boost is Reflector? How many hours do you think it saves you in a typical project? The next question is a little easier if you are a contractor or a consultant, but what is your hourly rate? If you are not a contractor, you can probably figure out an hourly rate. How long does it take to get a return on your investment? The value added proposition is not a difficult one to make. I have read people clamoring that Red Gate sucks and is evil. They complain about broken promises and conflicts of interest. Relax! Red Gate is not evil. The world is not coming to an end. The sun will come up tomorrow. I am sure that Red Gate will come up with options for volume licensing or site licensing for companies that want to get a licensed copy for their entire team. Don't panic, and I am sure that many great improvements are on the horizon. Switching the UI to WPF and including a tabbed interface opens up lots of possibilities.

  Read the article

• How to leverage the internal HTTP endpoint available on Azure web roles?

  - by Alfredo Delsors

  Imagine you have a Web application using an in-memory collection that changes occasionally but is used very often. The collection gets loaded from storage on the Application_Start global.asax event and is updated whenever its content changes. If you want to deploy this application on Azure you need to keep in mind that more than one instance of the application can be running at any time and therefore you need to provide some mechanism to keep all instances informed with the latest changes. Because the communication through internal endpoints between Azure role instances is at no cost, a good solution can be maintaining the information on Azure Storage Tables, reading its contents on the Application_Start event and populating its changes to all other instances using the internal HTTP port available on Azure Web Roles. You need to follow these steps to leverage the internal HTTP endpoint available on Azure web roles to maintain all instances up to date. 1.   Define an internal HTTP endpoint in the Web Role properties, for example InternalHttpEndpoint   2.   Add a new WCF service to the Web Role, for example NotificationService.svc 3.   Disable multiple site bindings in web.config: <serviceHostingEnvironment multipleSiteBindingsEnabled="false"> 4.   Add a method on the new service to receive notifications from other role instances. namespace Service { [ServiceContract] public interface INotificationService { [OperationContract(IsOneWay = true)] void Notify(Information info); } } 5.   Declare a class that inherits from System.ServiceModel.Activation.ServiceHostFactory and override the method CreateServiceHost to host the internal endpoint. public class InternalServiceFactory : ServiceHostFactory { protected override ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) { var internalEndpointAddress = string.Format( "http://{0}/NotificationService.svc", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["InternalHttpEndpoint"].IPEndpoint); ServiceHost host = new ServiceHost( typeof(NotificationService), new Uri(internalEndpointAddress)); BasicHttpBinding binding = new BasicHttpBinding(SecurityMode.None); host.AddServiceEndpoint( typeof(INotificationService), binding, internalEndpointAddress); return host; } } Note that you can use SecurityMode.None because the internal endpoint is private to the instances of the service. 6.   Edit the markup of the service right clicking the svc file and selecting "View markup" to add the new factory as the factory to be used to create the service <%@ ServiceHost Language="C#" Debug="true" Factory="Service.InternalServiceFactory" Service="Service.NotificationService" CodeBehind="NotificationService.svc.cs" %> 7.   Now you can notify changes to other instances using this code: var current = RoleEnvironment.CurrentRoleInstance; var endPoints = current.Role.Instances .Where(instance => instance != current) .Select(instance => instance.InstanceEndpoints["InternalHttpEndpoint"]); foreach (var ep in endPoints) { EndpointAddress address = new EndpointAddress( String.Format("http://{0}/NotificationService.svc", ep.IPEndpoint)); BasicHttpBinding binding = new BasicHttpBinding(SecurityMode.None); var factory = new ChannelFactory<INotificationService>(binding); INotificationService instance = factory.CreateChannel(address); instance.Notify(changedinfo); }

  Read the article

• Multiple Audio Issues

  - by Lerp

  I am having issues with my audio on Ubuntu 12.04, I will try and give as much detail as possible so sorry if there's too much detail. The Problem Audio plays from both speakers and headphone regardless of what connector I choose and regardless of the profile I use. The microphone is constantly being played through headphones & speakers. The headphone audio is extremely quiet but plays from both ears when I select "Headphones" for the connector in Sound Settings. The headphone audio only plays from one ear and is quiet (but not as quiet as above) when I select "Analogue Output" for the connector in Sound Settings. I can only select "Headphones" as the connector in Sound Settings if I set the profile to either "Analogue Stereo Output/Duplex", all others only allow me to choose "Analogue Output" for the connector. Despite the headphone sound issues, the speaker sound is fine apart from the fact that I am not able to select which output is used, they just both play. My headphone and microphone are plugged into the front and my speakers are plugged into the back. What I have tried I have put everything in alsamixer to 100 apart from "Front Mic Boost" which I have set to 0. Command Output aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD198x Headphone [AD198x Headphone] Subdevices: 1/1 Subdevice #0: subdevice #0 arecord -l **** List of CAPTURE Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog] Subdevices: 2/3 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf7ff8000 irq 70 cat /proc/asound/modules 0 snd_hda_intel cat /proc/asound/card*/codec* | grep "Codec" Codec: Analog Devices AD1989B cat /etc/modprobe.d/alsa-base.conf # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } # # Workaround at bug #499695 (reverted in Ubuntu see LP #319505) install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; } install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet --use-blacklist snd-seq-oss ; : ; } # install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; } # Cause optional modules to be loaded above sound card driver modules install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; } install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq ; } # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway) install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options saa7134-alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 options snd-usb-audio index=-2 options snd-usb-caiaq index=-2 options snd-usb-ua101 index=-2 options snd-usb-us122l index=-2 options snd-usb-usx2y index=-2 # Ubuntu #62691, enable MPU for snd-cmipci options snd-cmipci mpu_port=0x330 fm_port=0x388 # Keep snd-pcsp from being loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 Hopefully I have provided enough information, I will happily provide anymore information needed. Thank you. Update Reinstalling alsa-base and pulseaudio fixed the headphone issues I was having.

  Read the article

• A Patent for Workload Management Based on Service Level Objectives

  - by jsavit

  I'm very pleased to announce that after a tiny :-) wait of about 5 years, my patent application for a workload manager was finally approved. Background Many operating systems have a resource manager which lets you control machine resources. For example, Solaris provides controls for CPU with several options: shares for proportional CPU allocation. If you have twice as many shares as me, and we are competing for CPU, you'll get about twice as many CPU cycles), dedicated CPU allocation in which a number of CPUs are exclusively dedicated to an application's use. You can say that a zone or project "owns" 8 CPUs on a 32 CPU machine, for example. And, capped CPU in which you specify the upper bound, or cap, of how much CPU an application gets. For example, you can throttle an application to 0.125 of a CPU. (This isn't meant to be an exhaustive list of Solaris RM controls.) Workload management Useful as that is (and tragic that some other operating systems have little resource management and isolation, and frighten people into running only 1 app per OS instance - and wastefully size every server for the peak workload it might experience) that's not really workload management. With resource management one controls the resources, and hope that's enough to meet application service objectives. In fact, we hold resource distribution constant, see if that was good enough, and adjust resource distribution if that didn't meet service level objectives. Here's an example of what happens today: Let's try 30% dedicated CPU. Not enough? Let's try 80% Oh, that's too much, and we're achieving much better response time than the objective, but other workloads are starving. Let's back that off and try again. It's not the process I object to - it's that we to often do this manually. Worse, we sometimes identify and adjust the wrong resource and fiddle with that to no useful result. Back in my days as a customer managing large systems, one of my users would call me up to beg for a "CPU boost": Me: "it won't make any difference - there's plenty of spare CPU to be had, and your application is completely I/O bound." User: "Please do it anyway." Me: "oh, all right, but it won't do you any good." (I did, because he was a friend, but it didn't help.) Prior art There are some operating environments that take a stab about workload management (rather than resource management) but I find them lacking. I know of one that uses synthetic "service units" composed of the sum of CPU, I/O and memory allocations multiplied by weighting factors. A workload is set to make a target rate of service units consumed per second. But this seems to be missing a key point: what is the relationship between artificial 'service units' and actually meeting a throughput or response time objective? What if I get plenty of one of the components (so am getting enough service units), but not enough of the resource whose needed to remove the bottleneck? Actual workload management That's not really the answer either. What is needed is to specify a workload's service levels in terms of externally visible metrics that are meaningful to a business, such as response times or transactions per second, and have the workload manager figure out which resources are not being adequately provided, and then adjust it as needed. If an application is not meeting its service level objectives and the reason is that it's not getting enough CPU cycles, adjust its CPU resource accordingly. If the reason is that the application isn't getting enough RAM to keep its working set in memory, then adjust its RAM assignment appropriately so it stops swapping. Simple idea, but that's a task we keep dumping on system administrators. In other words - don't hold the number of CPU shares constant and watch the achievement of service level vary. Instead, hold the service level constant, and dynamically adjust the number of CPU shares (or amount of other resources like RAM or I/O bandwidth) in order to meet the objective. Instrumenting non-instrumented applications There's one little problem here: how do I measure application performance in a way relating to a service level. I don't want to do it based on internal resources like number of CPU seconds it received per minute - We need to make resource decisions based on externally visible and meaningful measures of performance, not synthetic items or internal resource counters. If I have a way of marking the beginning and end of a transaction, I can then measure whether or not the application is meeting an objective based on it. If I can observe the delay factors for an application, I can see which resource shortages are slowing an application enough to keep it from meeting its objectives. I can then adjust resource allocations to relieve those shortages. Fortunately, Solaris provides facilities for both marking application progress and determining what factors cause application latency. The Solaris DTrace facility let's me introspect on application behavior: in particular I can see events like "receive a web hit" and "respond to that web hit" so I can get transaction rate and response time. DTrace (and tools like prstat) let me see where latency is being added to an application, so I know which resource to adjust. Summary After a delay of a mere few years, I am the proud creator of a patent (advice to anyone interested in going through the process: don't hold your breath!). The fundamental idea is fairly simple: instead of holding resource constant and suffering variable levels of success meeting service level objectives, properly characterise the service level objective in meaningful terms, instrument the application to see if it's meeting the objective, and then have a workload manager change resource allocations to remove delays preventing service level attainment. I've done it by hand for a long time - I think that's what a computer should do for me.

  Read the article

• Unknown C# keywords: params

  - by Chris Skardon

  Often overlooked, and (some may say) unloved, is the params keyword, but it’s an awesome keyword, and one you should definitely check out. What does it do? Well, it lets you specify a single parameter that can have a variable number of arguments. You what? Best shown with an example, let’s say we write an add method: public int Add(int first, int second) { return first + second; } meh, it’s alright, does what it says on the tin, but it’s not exactly awe-inspiring… Oh noes! You need to add 3 things together??? public int Add(int first, int second, int third) { return first + second + third; } oh yes, you code master you! Overloading a-plenty! Now a fourth… Ok, this is starting to get a bit ridiculous, if only there was some way… public int Add(int first, int second, params int[] others) { return first + second + others.Sum(); } So now I can call this with any number of int arguments? – well, any number > 2..? Yes! int ret = Add(1, 2, 3); Is as valid as: int ret = Add(1, 2, 3, 4); Of course you probably won’t really need to ever do that method, so what could you use it for? How about adding strings together? What about a logging method? We all know ToString can be an expensive method to call, it might traverse every node on a class hierarchy, or may just be the name of the type… either way, we don’t really want to call it if we can avoid it, so how about a logging method like so: public void Log(LogLevel level, params object[] objs) { if(LoggingLevel < level) return; StringBuilder output = new StringBuilder(); foreach(var obj in objs) output.Append((obj == null) ? "null" : obj.ToString()); return output; } Now we only call ‘ToString’ when we want to, and because we’re passing in just objects we don’t have to call ToString if the Logging Level isn’t what we want… Of course, there are a multitude of things to use params for…

  Read the article

• why are my players drawn to the side of my viewport

  - by Jetbuster

  Following this admittedly brilliant and clean 2d camera class I have a camera on each player, and it works for multiplayer and i've divided the screen into two sections for split screen by giving each camera a viewport. However in the game it looks like this I'm not sure if thats their position relative to the screen or what The relevant gameScreen code, the makePlayers is setup so it could theoretically work for up to 4 players private void makePlayers() { int rowCount = 1; if (NumberOfPlayers > 2) rowCount = 2; players = new Player[NumberOfPlayers]; for (int i = 0; i < players.Length; i++) { int xSize = GameRef.Window.ClientBounds.Width / 2; int ySize = GameRef.Window.ClientBounds.Height / rowCount; int col = i % rowCount; int row = i / rowCount; int xPoint = 0 + xSize * row; int yPoint = 0 + ySize * col; Viewport viewport = new Viewport(xPoint, yPoint, xSize, ySize); Vector2 playerPosition = new Vector2(viewport.TitleSafeArea.X + viewport.TitleSafeArea.Width / 2, viewport.TitleSafeArea.Y + viewport.TitleSafeArea.Height / 2); players[i] = new Player(playerPosition, playerSprites[i], GameRef, viewport); } //players[1].Keyboard = true; } public override void Draw(GameTime gameTime) { base.Draw(gameTime); foreach (Player player in players) { GraphicsDevice.Viewport = player.PlayerCamera.ViewPort; GameRef.spriteBatch.Begin(SpriteSortMode.Immediate, BlendState.AlphaBlend, SamplerState.PointClamp, null, null, null, player.PlayerCamera.Transform); map.Draw(GameRef.spriteBatch); // Draw the Player player.Draw(GameRef.spriteBatch); // Draw UI screen elements GraphicsDevice.Viewport = Viewport; ControlManager.Draw(GameRef.spriteBatch); GameRef.spriteBatch.End(); } } the player's initialize and draw methods are like so internal void Initialize() { this.score = 0; this.angle = (float)(Math.PI * 0 / 180);//Start sprite at it's default rotation int width = utils.scaleInt(picture.Width, imageScale); int height = utils.scaleInt(picture.Height, imageScale); this.hitBox = new HitBox(new Vector2(centerPos.X - width / 2, centerPos.Y - height / 2), width, height, Color.Black, game.Window.ClientBounds); playerCamera.Initialize(); } #region Methods public void Draw(SpriteBatch spriteBatch) { //Console.WriteLine("Hitbox: X({0}),Y({1})", hitBox.Points[0].X, hitBox.Points[0].Y); //Console.WriteLine("Image: X({0}),Y({1})", centerPos.X, centerPos.Y); Vector2 orgin = new Vector2(picture.Width / 2, picture.Height / 2); hitBox.Draw(spriteBatch); utils.DrawCrosshair(spriteBatch, Position, game.Window.ClientBounds, Color.Red); spriteBatch.Draw(picture, Position, null, Color.White, angle, orgin, imageScale, SpriteEffects.None, 0.1f); } as I said I think I'm gonna need to do something with the render position but I'm to entirely sure what or how it would be elegant to say the least

  Read the article

• Data Transformation Pipeline

  - by davenewza

  I have create some kind of data pipeline to transform coordinate data into more useful information. Here is the shell of pipeline: public class PositionPipeline { protected List<IPipelineComponent> components; public PositionPipeline() { components = new List<IPipelineComponent>(); } public PositionPipelineEntity Process(Position position) { foreach (var component in components) { position = component.Execute(position); } return position; } public PositionPipeline RegisterComponent(IPipelineComponent component) { components.Add(component); return this; } } Every IPipelineComponent accepts and returns the same type - a PositionPipelineEntity. Code: public interface IPipelineComponent { PositionPipelineEntity Execute(PositionPipelineEntity position); } The PositionPipelineEntity needs to have many properties, many which are unused in certain components and required in others. Some properties will also have become redundant at the end of the pipeline. For example, these components could be executed: TransformCoordinatesComponent: Parse the raw coordinate data into a Coordinate type. DetermineCountryComponent: Determine and stores country code. DetermineOnRoadComponent: Determine and store whether coordinate is on a road. Code: pipeline .RegisterComponent(new TransformCoordinatesComponent()) .RegisterComponent(new DetermineCountryComponent()) .RegisterComponent(new DetermineOnRoadComponent()); pipeline.Process(positionPipelineEntity); The PositionPipelineEntity type: public class PositionPipelineEntity { // Only relevant to the TransformCoordinatesComponent public decimal RawCoordinateLatitude { get; set; } // Only relevant to the TransformCoordinatesComponent public decimal RawCoordinateLongitude { get; set; } // Required by all components after TransformCoordinatesComponent public Coordinate CoordinateLatitude { get; set; } // Required by all components after TransformCoordinatesComponent public Coordinate CoordinateLongitude { get; set; } // Set in DetermineCountryComponent, not required anywhere. // Requires CoordinateLatitude and CoordinateLongitude (TransformCoordinatesComponent) public string CountryCode { get; set; } // Set in DetermineOnRoadComponent, not required anywhere. // Requires CoordinateLatitude and CoordinateLongitude (TransformCoordinatesComponent) public bool OnRoad { get; set; } } Problems: I'm very concerned about the dependency that a component has on properties. The way to solve this would be to create specific types for each component. The problem then is that I cannot chain them together like this. The other problem is the order of components in the pipeline matters. There is some dependency. The current structure does not provide any static or runtime checking for such a thing. Any feedback would be appreciated.

  Read the article

• How employable am I as a programmer?

  - by dsimcha

  I'm currently a Ph.D. student in Biomedical Engineering with a concentration in computational biology and am starting to think about what I want to do after graduate school. I feel like I've accumulated a lot of programming skills while in grad school, but taken a very non-traditional path to learning all this stuff. I'm wondering whether I would have an easy time getting hired as a programmer and could fall back on that if I can't find a good job directly in my field, and if so whether I would qualify for a more prestigious position than "code monkey". Things I Have Going For Me Approximately 4 years of experience programming as part of my research. I believe I have a solid enough grasp of the fundamentals that I could pick up new languages and technologies pretty fast, and could demonstrate this in an interview. Good math and statistics skills. An extensive portfolio of open source work (and the knowledge that working on these projects implies): I wrote a statistics library in D, mostly from scratch. I wrote a parallelism library (parallel map, reduce, foreach, task parallelism, pipelining, etc.) that is currently in review for adoption by the D standard library. I wrote a 2D plotting library for D against the GTK Cairo backend. I currently use it for most of the figures I make for my research. I've contributed several major performance optimizations to the D garbage collector. (Most of these were low-hanging fruit, but it still shows my knowledge of low-level issues like memory management, pointers and bit twiddling.) I've contributed lots of miscellaneous bug fixes to the D standard library and could show the change logs to prove it. (This demonstrates my ability read other people's code.) Things I Have Going Against Me Most of my programming experience is in D and Python. I have very little to virtually no experience in the more established, "enterprise-y" languages like Java, C# and C++, though I have learned a decent amount about these languages from small, one-off projects and discussions about language design in the D community. In general I have absolutely no knowledge of "enterprise-y" technlogies. I've never used a framework before, possibly because most reusable code for scientific work and for D tends to call itself a "library" instead. I have virtually no formal computer science/software engineering training. Almost all of my knowledge comes from talking to programming geek friends, reading blogs, forums, StackOverflow, etc. I have zero professional experience with the official title of "developer", "software engineer", or something similar.

  Read the article

• Gettings Terms asscoiated to a Specific list item

  - by Gino Abraham

  I had a fancy requirement where i had to get all tags associated to a document set in a document library. The normal tag could webpart was not working when i add it to the document set home page, so planned a custom webpart. Was checking in net to find a straight forward way to achieve this, but was not lucky enough to get something. Since i didnt get any samples in net, i looked into Microsoft.Sharerpoint.Portal.Webcontrols and found a solution.The socialdataframemanager control in 14Hive/Template/layouts/SocialDataFrame.aspx directed me to the solution. You can get the dll from ISAPI folder. Following Code snippet can get all Terms associated to the List Item given that you have list name and id for the list item. using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.SharePoint; using Microsoft.Office.Server.SocialData; namespace TagChecker { class Program { static void Main(string[] args) { // Your site url string siteUrl = http://contoso; // List Name string listName = "DocumentLibrary1"; // List Item Id for which you want to get all terms int listItemId = 35; using (SPSite site = new SPSite(siteUrl)) { using(SPWeb web = site.OpenWeb()) { SPListItem listItem = web.Lists[listName].GetItemById(listItemId); string url = string.Empty; // Based on the list type the url would be formed. Code Sniffed from Micosoft dlls :) if (listItem.ParentList.BaseType == SPBaseType.DocumentLibrary) { url = listItem.Web.Url.TrimEnd(new char[] { '/' }) + "/" + listItem.Url.TrimStart(new char[] { '/' }); } else if (SPFileSystemObjectType.Folder == listItem.FileSystemObjectType) { url = listItem.Web.Url.TrimEnd(new char[] { '/' }) + "/" + listItem.Folder.Url.TrimStart(new char[] { '/' }); } else { url = listItem.Web.Url.TrimEnd(new char[] { '/' }) + "/" + listItem.ParentList.Forms[PAGETYPE.PAGE_DISPLAYFORM].Url.TrimStart(new char[] { '/' }) + "?ID=" + listItem.ID.ToString(); } SPServiceContext serviceContext = SPServiceContext.GetContext(site); Uri uri = new Uri(url); SocialTagManager mgr = new SocialTagManager(serviceContext); SocialTerm[] terms = mgr.GetTerms(uri); foreach (SocialTerm term in terms) { Console.WriteLine(term.Term.Labels[0].Value ); } } } Console.Read(); } } } Reference dlls added are Microsoft.Sharepoint , Microsoft.Sharepoint.Taxonomy, Microsoft.office.server, Microsoft.Office.Server.UserProfiles from ISAPI folder. This logic can be used to make a custom tag cloud webpart by taking code from OOB tag cloud, so taht you can have you webpart anywhere in the site and still get Tags added to a specifc libdary/List. Hope this helps some one.

  Read the article

• How do you handle objects that need custom behavior, and need to exist as an entity in the database?

  - by Scott Whitlock

  For a simple example, assume your application sends out notifications to users when various events happen. So in the database I might have the following tables: TABLE Event EventId uniqueidentifier EventName varchar TABLE User UserId uniqueidentifier Name varchar TABLE EventSubscription EventUserId EventId UserId The events themselves are generated by the program. So there are hard-coded points in the application where an event instance is generated, and it needs to notify all the subscribed users. So, the application itself doesn't edit the Event table, except during initial installation, and during an update where a new Event might be created. At some point, when an event is generated, the application needs to lookup the Event and get a list of Users. What's the best way to link the event in the source code to the event in the database? Option 1: Store the EventName in the program as a fixed constant, and look it up by name. Option 2: Store the EventId in the program as a static Guid, and look it up by ID. Extra Credit In other similar circumstances I may want to include custom behavior with the event type. That is, I'll want subclasses of my Event entity class with different behaviors, and when I lookup an event, I want it to return an instance of my subclass. For instance: class Event { public Guid Id { get; } public Guid EventName { get; } public ReadOnlyCollection<EventSubscription> EventSubscriptions { get; } public void NotifySubscribers() { foreach(var eventSubscription in EventSubscriptions) { eventSubscription.Notify(); } this.OnSubscribersNotified(); } public virtual void OnSubscribersNotified() {} } class WakingEvent : Event { private readonly IWaker waker; public WakingEvent(IWaker waker) { if(waker == null) throw new ArgumentNullException("waker"); this.waker = waker; } public override void OnSubscribersNotified() { this.waker.Wake(); base.OnSubscribersNotified(); } } So, that means I need to map WakingEvent to whatever key I'm using to look it up in the database. Let's say that's the EventId. Where do I store this relationship? Does it go in the event repository class? Should the WakingEvent know declare its own ID in a static member or method? ...and then, is this all backwards? If all events have a subclass, then instead of retrieving events by ID, should I be asking my repository for the WakingEvent like this: public T GetEvent<T>() where T : Event { ... // what goes here? ... } I can't be the first one to tackle this. What's the best practice?

  Read the article

• Why bother writing an Windows 8 app?

  - by Dennis Vroegop

  So you want to know more about development for Window 8. Great! There are lots of reasons you should be excited about this. Since I don’t know why YOU are interested in this, I’ll make a list of reasons people can choose from. (as a side note: whenever I talk about Win8 development I am referring to the Metro Style / WinRt side of things. Apps for the ‘classic’ desktop side of Win8 on Intel are business as usual…) So… Why would you care about making an app for Windows 8? 1. It’s cool. Let’s not beat around the bush: if you like development for a hobby then you’ll love to work on this new platform. You can create apps in a relative short time (short time as in compared to writing a new CRM system) and that makes it great for a hobby product. 2. You’ll stand out. Hey, we all need an ego boost every now and then. We all need to feel special. So if you can manage to be one of the first to have you app in the Store then you’ll likely to be noticed. Just close your eyes for a moment and image you standing in a bar. It’s crowded, and then you casually say “Oh yeah, I just had my app certified and it’s in the Win8 store now”. People will stop talking, will offer you drinks and beautiful women / gorgeous man / furry creatures from Alpha Centauri (whatever your preferences are) will propose. Or maybe not. Anyway…. 3. Make some cash! IDC predicts there will be about 350,000,000 Windows 8 licenses sold in the next year. Think about that number. 350,000,000. And they all have access to the Store. Where you’re app will be. With one little click they can select it, download and somehow magically $1.00 or $2.00 from their bank account is transferred to yours. Now, I am not saying that all of those people will download and buy your app but what if only 1% of them did? Remember: there aren’t that many apps available yet….. 4. Learn. Creating new small apps is a great way to learn new stuff. Yes, you could read about it (on this blog for instance) but the only way to learn something is to do it. So be prepared for the future and learn something new by doing it.Write an app! Now! 5. The biggie (for me at least): it’s fun. Even if you remove the points above it’s still fun to write for these devices and this platform. Now some of you will say : “But why not write a great app for IOS or Android?” I think this is a valid question. Of course the novelty of the platform wears out and points 2 and 3 from above list will not be as relevant as it is today. But still 1 4 and 5 remain. And don’t forget: if you already work on the Microsoft platform it’s not that hard to learn this new Win8 stuff. If you have done some XAML development (be it WPF or Silverlight) you are almost there in becoming a good Win8 developer. So you’ll be more productive much sooner than when you have to learn Objective C or Java. Even if you’re a HTML / Javascript developer (I say developer here, not designer) you’ll be up to speed on Win8 development pretty soon. Yes, you, that funky Web Developer who lives and breathes HTML5, CSS3 and JavaScript / Node.Js / JQuery: you too can be a Win8 developer. A first class Win8 developer! So.. Download the stuff you need from http://dev.windows.com install Windows 8 and Visual Studio 12 and by the time you’re ready I’ll be working on the next article: how to do all this? Happy coding!

  Read the article

• Rendering My Fault Message

  - by onefloridacoder

  My coworkers setup  a nice way to get the fault messages from our service layer all the way back to the client’s service proxy layer.  This is what I needed to work on this afternoon.  Through a series of trials and errors I finally figured this out. The confusion was how I was looking at the exception in the quick watch viewer.  It appeared as though the EventArgs from the service call had somehow magically been cast back to FaultException(), not FaultException<T>.  I drilled into the EventArgs object with the quick watch and I copied this code to figure out where the Fault message was hiding.  Further, when I copied this quick watch code into the IDE I got squigglies.  Poop. 1: ((System 2: .ServiceModel 3: .FaultException<UnhandledExceptionFault>)(((System.Exception)(e.Result)).InnerException)).Detail.FaultMessage I wont bore you with the details but here’s how it turned out.   EventArgs which I’m calling “e” is not the result such as some collection of items you’re expecting.  It’s actually a FaultException, or in my case FaultException<T>.  Below is the calling code and the callback to handle the expected response or the fault from the completed event. 1: public void BeginRetrieveItems(Action<ObservableCollection<Model.Widget>> FindItemsCompleteCallback, Model.WidgetLocation location) 2: { 3: var proxy = new MyServiceContractClient(); 4:  5: proxy.RetrieveWidgetsCompleted += (s, e) => FindWidgetsCompleteCallback(FindWidgetsCompleted(e)); 6:  7: RetrieveWidgetsRequest request = new RetrieveWidgetsRequest { location.Id }; 8:  9: proxy.RetrieveWidgetsAsync(request); 10: } 11:  12: private ObservableCollection<Model.Widget> FindItemsCompleted(RetrieveWidgetsCompletedEventArgs e) 13: { 14: if (e.Error is FaultException<UnhandledExceptionFault>) 15: { 16: var fault = (FaultException<UnhandledExceptionFault>)e.Error; 17: var faultDetailMessage = fault.Detail.FaultMessage; 18:  19: UIMessageControlDuJour.Show(faultDetailMessage); 20: return new ObservableCollection<BinInventoryItemCountInfo>(); 21: } 22:  23: var widgets = new ObservableCollection<Model.Widget>(); 24:  25: if (e.Result.Widgets != null) 26: { 27: e.Result.Widgets.ToList().ForEach(w => widgets.Add(this.WidgetMapper.Map(w))); 28: } 29:  30: return widgets; 31: }

  Read the article

• How to use DoDirect/Paypal Pro in asp.net?

  - by ptahiliani

  using System;using System.Collections.Generic;using System.Linq;using System.Web;using System.Web.UI;using System.Web.UI.WebControls;using System.Net;using System.IO;using System.Collections;public partial class Default2 : System.Web.UI.Page{    protected void Page_Load(object sender, EventArgs e)    {    }    protected void Button1_Click(object sender, EventArgs e)    {        //API Credentials (3-token)        string strUsername = "<<enter your sandbox username here>>";        string strPassword = "<<enter your sandbox password here>>";        string strSignature = "<<enter your signature here>>";        string strCredentials = "USER=" + strUsername + "&PWD=" + strPassword + "&SIGNATURE=" + strSignature;        string strNVPSandboxServer = "https://api-3t.sandbox.paypal.com/nvp";        string strAPIVersion = "2.3";        string strNVP = strCredentials + "&METHOD=DoDirectPayment" +        "&CREDITCARDTYPE=" + "Visa" +        "&ACCT=" + "4710496235600346" +        "&EXPDATE=" + "10" + "2017" +        "&CVV2=" + "123" +        "&AMT=" + "12.34" +        "&FIRSTNAME=" + "Demo" +        "&LASTNAME=" + "User" +        "&IPADDRESS=192.168.2.236" +        "&STREET=" + "Lorem-1" +        "&CITY=" + "Lipsum-1" +        "&STATE=" + "Lorem" +        "&COUNTRY=" + "INDIA" +        "&ZIP=" + "302004" +        "&COUNTRYCODE=IN" +        "&PAYMENTACTION=Sale" +        "&VERSION=" + strAPIVersion;        try        {            //Create web request and web response objects, make sure you using the correct server (sandbox/live)            HttpWebRequest wrWebRequest = (HttpWebRequest)WebRequest.Create(strNVPSandboxServer);            wrWebRequest.Method = "POST";            StreamWriter requestWriter = new StreamWriter(wrWebRequest.GetRequestStream());            requestWriter.Write(strNVP);            requestWriter.Close();            // Get the response.            HttpWebResponse hwrWebResponse = (HttpWebResponse)wrWebRequest.GetResponse();            StreamReader responseReader = new StreamReader(wrWebRequest.GetResponse().GetResponseStream());            //and read the response            string responseData = responseReader.ReadToEnd();            responseReader.Close();            string result = Server.UrlDecode(responseData);            string[] arrResult = result.Split('&');            Hashtable htResponse = new Hashtable();            string[] responseItemArray;            foreach (string responseItem in arrResult)            {                responseItemArray = responseItem.Split('=');                htResponse.Add(responseItemArray[0], responseItemArray[1]);            }            string strAck = htResponse["ACK"].ToString();            if (strAck == "Success" || strAck == "SuccessWithWarning")            {                string strAmt = htResponse["AMT"].ToString();                string strCcy = htResponse["CURRENCYCODE"].ToString();                string strTransactionID = htResponse["TRANSACTIONID"].ToString();                //ordersDataSource.InsertParameters["TransactionID"].DefaultValue = strTransactionID;                string strSuccess = "Thank you, your order for: $" + strAmt + " " + strCcy + " has been processed.";                //successLabel.Text = strSuccess;                Response.Write(strSuccess.ToString());            }            else            {                string strErr = "Error: " + htResponse["L_LONGMESSAGE0"].ToString();                string strErrcode = "Error code: " + htResponse["L_ERRORCODE0"].ToString();                //errLabel.Text = strErr;                //errcodeLabel.Text = strErrcode;                Response.Write(strErr.ToString() + "<br/>" + strErrcode.ToString());                return;            }        }        catch (Exception ex)        {            // do something to catch the error, like write to a log file.            Response.Write("error processing");        }    }}

  Read the article

• why are my players drawn top the side of my viewport

  - by Jetbuster

  Following this admittedly brilliant and clean 2d camera class I have a camera on each player, and it works for multiplayer and i've divided the screen into two sections for split screen by giving each camera a viewport. However in the game it looks like this I'm not sure if thats their position relative to the screen or what The relevant gameScreen code, the makePlayers is setup so it could theoretically work for up to 4 players private void makePlayers() { int rowCount = 1; if (NumberOfPlayers > 2) rowCount = 2; players = new Player[NumberOfPlayers]; for (int i = 0; i < players.Length; i++) { int xSize = GameRef.Window.ClientBounds.Width / 2; int ySize = GameRef.Window.ClientBounds.Height / rowCount; int col = i % rowCount; int row = i / rowCount; int xPoint = 0 + xSize * row; int yPoint = 0 + ySize * col; Viewport viewport = new Viewport(xPoint, yPoint, xSize, ySize); Vector2 playerPosition = new Vector2(viewport.TitleSafeArea.X + viewport.TitleSafeArea.Width / 2, viewport.TitleSafeArea.Y + viewport.TitleSafeArea.Height / 2); players[i] = new Player(playerPosition, playerSprites[i], GameRef, viewport); } //players[1].Keyboard = true; } public override void Draw(GameTime gameTime) { base.Draw(gameTime); foreach (Player player in players) { GraphicsDevice.Viewport = player.PlayerCamera.ViewPort; GameRef.spriteBatch.Begin(SpriteSortMode.Immediate, BlendState.AlphaBlend, SamplerState.PointClamp, null, null, null, player.PlayerCamera.Transform); map.Draw(GameRef.spriteBatch); // Draw the Player player.Draw(GameRef.spriteBatch); // Draw UI screen elements GraphicsDevice.Viewport = Viewport; ControlManager.Draw(GameRef.spriteBatch); GameRef.spriteBatch.End(); } } the player's initialize and draw methods are like so internal void Initialize() { this.score = 0; this.angle = (float)(Math.PI * 0 / 180);//Start sprite at it's default rotation int width = utils.scaleInt(picture.Width, imageScale); int height = utils.scaleInt(picture.Height, imageScale); this.hitBox = new HitBox(new Vector2(centerPos.X - width / 2, centerPos.Y - height / 2), width, height, Color.Black, game.Window.ClientBounds); playerCamera.Initialize(); } #region Methods public void Draw(SpriteBatch spriteBatch) { //Console.WriteLine("Hitbox: X({0}),Y({1})", hitBox.Points[0].X, hitBox.Points[0].Y); //Console.WriteLine("Image: X({0}),Y({1})", centerPos.X, centerPos.Y); Vector2 orgin = new Vector2(picture.Width / 2, picture.Height / 2); hitBox.Draw(spriteBatch); utils.DrawCrosshair(spriteBatch, Position, game.Window.ClientBounds, Color.Red); spriteBatch.Draw(picture, Position, null, Color.White, angle, orgin, imageScale, SpriteEffects.None, 0.1f); } as I said I think I'm gonna need to do something with the render position but I'm to entirely sure what or how it would be elegant to say the least

  Read the article

• From the Classroom to the Boardroom

  - by Maria Sandu

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Pens and Paper...these are the only things being a student and being a graduate / professional have in common. Walking in to the offices of Oracle South Africa as a graduate the first thing you notice is how polished and sleek all the people who work here look. 80% of the ladies wear sky-scraper heels and walk with the greatest grace. This was the first of many rude awakenings to remind me that I am no longer a student but a graduate. My first struggle was having to wake up at wee hours of the morning to prepare for work. As a student going to class was almost an optional thing, if you missed a morning class you could always attend an evening class to make up for it or simply attend with another group. But in the workplace, you HAVE to show up every single morning at the same time, with no option of coming in when it suits you and there is definitely no coming in with the evening class/shift. As a student, the earliest hour I ever woke up was 7:00am, anything earlier than that was considered inhumane torture. My reason for waking up every morning as a student was “you have a degree to go get” but as a graduate having to go to work I have to say to myself “here’s to a new day of learning and growing”. My second struggle has come in having to change my beloved wardrobe. Everyone who knows me knows how passionate I am about fashion and shopping. For me Shopping is a BASIC HUMAN RIGHT, that should not be messed with. Therefore it was with great sadness that I swopped my rippled skinny jeans for pin-striped formal pants, my long chandelier earrings for simple studs, my flat shoes for heels, my sheer blouses for crisp white shirts, even my beloved wild hair had to make way for a simple ponytail. Our looks as ladies also came under great scrutiny, we had to acquaint ourselves with some serious grooming tools: the mascara, blush, lip-gloss, blush, a touch of lipstick and a manicure set. Language was a struggle of its own as well. Being a student you learn to relate to your peers in a informal way. In the workplace you have to address everyone with the same respect, including your peers. Words like “Hey buddy” had to make way for “good morning friend”. The month long winter school holiday was one of the things I looked forward to as a student. This was a time where we got to be at home and avoid the coldest month of the year, July. It was the most amazing thing ever, just sleeping and snuggling up to all sorts of warm things but sadly it is now a thing of the past. It is currently winter in South Africa and going to work has become the most unfashionable thing with all the jackets, boots, scarves and gloves. But summer is coming and I will miss those holidays too. As a student the school holidays were like a gift for us to catch a break and not think for a while which was why it was imaginable how someone would go on for the entire year without a break, with only the promise of a mere 21 days annual leave!! Right now I am sure we are all looking forward to taking that annual leave when the time is right. The worst rude awakening I must say, has to be presenting in front of clients and managers. As a student you have the same class mates for almost four years therefore presenting in front of them becomes the norm over the years and your lecturer will always go gently on you. What they don’t tell you at University is that in the real world, time is money and clients pay money to see you present therefore there is no room for error. Clients are not there to give you a score and boost your ego, they expect nothing less than 100% and they will let you know without a second thought. For a graduate this can feel like you are being fed to the sharks, you either get eaten or you swim for your life. At the end of the day, it is all an experience that is meant to groom us into better professional and make us a part of the Red Team. All the sacrifices are worth it and they lead us to being better and more polished professionals. So if you are interested in joining the ECEMEA Sales and Presales Internship Programme, please have a look at http://campus.oracle.com for more information and for our latest vacancies and internships. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

< Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >