Search Results

Search found 4957 results on 199 pages for 'keyboard launchers'.

Page 184/199 | < Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >

• iPhone: Software Development And Distribution

  - by xsl

  I have a few quick questions about the iPhone software development. I did some research about the topic, but there are a few specific things I would like to ask here, because I will have to estimate the cost of the required hardware and software, before I am allowed to buy anything. I never did any Mac development nor have I ever owned an iPhone, so needless to say this is quite hard for me. I will buy an iMac mini with 2 GB RAM for iPhone development. I will have to use it at the same time as my regular PC, but the majority of the time I won't use the Mac at all. Do I have to buy an additional monitor, a mouse and a keyboard or is there a better solution? I will have to port a C library to the iPhone platform and develop an iPhone application that uses the ported library. Do I need anything else than the iPhone SDK to do this? If I use an external library (see above), can I test the application with the integrated emulator, or is it recommend to buy the device? In a later phase of the project I will have to buy an iPhone, but I will have to wait until the iPhone 4 is released here in Europe, because the application requires a camera. In addition to this I will have to send data to a remote webservice. Aside from these two things I don't require any other features. Can I just buy the iPhone online from another country (the iPhones here are sim locked), or should I buy one with a contract? When the application is ready, it will be installed on a few iPhones owned by our customer. Because of security reasons it is crucial that there is no third party involved in this process (i.e. the application should not be distributed on the app store). Is this possible?

  Read the article

• Optimizing transition/movement smoothness for a 2D flash game.

  - by Tom

  Update 6: Fenomenas suggested me to re-create everything as simple as possible. I had my doubts that this would make any difference as the algorithm remains the same, and performance did not seem to be the issue. Anyway, it was the only suggestion I got so here it is: 30 FPS: http://www.feedpostal.com/test/simple/30/SimpleMovement.html 40 FPS: http://www.feedpostal.com/test/simple/40/SimpleMovement.html 60 FPS: http://www.feedpostal.com/test/simple/60/SimpleMovement.html 100 FPS: http://www.feedpostal.com/test/simple/100/SimpleMovement.html The code: package { import flash.display.Sprite; import flash.events.Event; import flash.events.KeyboardEvent; import flash.utils.getTimer; [SWF(width="800", height="600", frameRate="40", backgroundColor="#000000")] public class SimpleMovement extends Sprite { private static const TURNING_SPEED:uint = 180; private static const MOVEMENT_SPEED:uint = 400; private static const RADIAN_DIVIDE:Number = Math.PI/180; private var playerObject:Sprite; private var shipContainer:Sprite; private var moving:Boolean = false; private var turningMode:uint = 0; private var movementTimestamp:Number = getTimer(); private var turningTimestamp:Number = movementTimestamp; public function SimpleMovement() { //step 1: create player object playerObject = new Sprite(); playerObject.graphics.lineStyle(1, 0x000000); playerObject.graphics.beginFill(0x6D7B8D); playerObject.graphics.drawRect(0, 0, 25, 50); //make it rotate around the center playerObject.x = 0 - playerObject.width / 2; playerObject.y = 0 - playerObject.height / 2; shipContainer = new Sprite(); shipContainer.addChild(playerObject); shipContainer.x = 100; shipContainer.y = 100; shipContainer.rotation = 180; addChild(shipContainer); //step 2: install keyboard hook when stage is ready addEventListener(Event.ADDED_TO_STAGE, stageReady, false, 0, true); //step 3: install rendering update poll addEventListener(Event.ENTER_FRAME, updatePoller, false, 0, true); } private function updatePoller(event:Event):void { var newTime:Number = getTimer(); //turning if (turningMode != 0) { var turningDeltaTime:Number = newTime - turningTimestamp; turningTimestamp = newTime; var rotation:Number = TURNING_SPEED * turningDeltaTime / 1000; if (turningMode == 1) shipContainer.rotation -= rotation; else shipContainer.rotation += rotation; } //movement if (moving) { var movementDeltaTime:Number = newTime - movementTimestamp; movementTimestamp = newTime; var distance:Number = MOVEMENT_SPEED * movementDeltaTime / 1000; var rAngle:Number = shipContainer.rotation * RADIAN_DIVIDE; //convert degrees to radian shipContainer.x += distance * Math.sin(rAngle); shipContainer.y -= distance * Math.cos(rAngle); } } private function stageReady(event:Event):void { //install keyboard hook stage.addEventListener(KeyboardEvent.KEY_DOWN, keyDown, false, 0, true); stage.addEventListener(KeyboardEvent.KEY_UP, keyUp, false, 0, true); } private final function keyDown(event:KeyboardEvent):void { if ((event.keyCode == 87) && (!moving)) //87 = W { movementTimestamp = getTimer(); moving = true; } if ((event.keyCode == 65) && (turningMode != 1)) //65 = A { turningTimestamp = getTimer(); turningMode = 1; } else if ((event.keyCode == 68) && (turningMode != 2)) //68 = D { turningTimestamp = getTimer(); turningMode = 2; } } private final function keyUp(event:KeyboardEvent):void { if ((event.keyCode == 87) && (moving)) moving = false; //87 = W if (((event.keyCode == 65) || (event.keyCode == 68)) && (turningMode != 0)) turningMode = 0; //65 = A, 68 = D } } } The results were as I expected. Absolutely no improvement. I really hope that someone has another suggestion as this thing needs fixing. Also, I doubt it's my system as I have a pretty good one (8GB RAM, Q9550 QuadCore intel, ATI Radeon 4870 512MB). Also, everyone else I asked so far had the same issue with my client. Update 5: another example of a smooth flash game just to demonstrate that my movement definitely is different! See http://www.spel.nl/game/bumpercraft.html Update 4: I traced the time before rendering (EVENT.RENDER) and right after rendering (EVENT.ENTER_FRAME), the results: rendering took: 14 ms rendering took: 14 ms rendering took: 12 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 14 ms rendering took: 12 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 14 ms rendering took: 12 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 14 ms rendering took: 14 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 24 ms rendering took: 18 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 232 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms rendering took: 14 ms rendering took: 16 ms rendering took: 12 ms rendering took: 14 ms rendering took: 12 ms The range is 12-16 ms. During these differences, the shocking/warping/flickering movement was already going on. There is also 1 peak of 232ms, at this time there was a relatively big warp. This is however not the biggest problme, the biggest problem are the continuous small warps during normal movement. Does this give anyone a clue? Update 3: After testing, I know that the following factors are not causing my problem: Bitmap's quality - changed with photoshop to an uglier 8 colours optimized graphic, no improvement at all. Constant rotation of image while turning - disabled it, no improvement at all Browser rendering - tried to use the flash player standalone, no improvement at all I am 100% convinced that the problem lies in either my code or in my algorithm. Please, help me out. It has been almost two weeks (1 week that I asked this question on SO) now and I still have to get my golden answer. Update 1: see bottom for full flex project source and a live demo demonstrating my problem. I'm working on a 2d flash game. Player ships are created as an object: ships[id] = new GameShip(); When movement and rotation information is available, this is being directed to the corresponding ship: ships[id].setMovementMode(1); //move forward Now, within this GameShip object movement works using the "Event.ENTER_FRAME" event: addEventListener(Event.ENTER_FRAME, movementHandler); The following function is then being run: private final function movementHandler(event:Event):void { var newTimeStamp:uint = UtilLib.getTimeStamp(); //set current timeStamp var distance:Number = (newTimeStamp - movementTimeStamp) / 1000 * movementSpeed; //speed = x pixels forward every 1 second movementTimeStamp = newTimeStamp; //update old timeStamp var diagonalChange:Array = getDiagonalChange(movementAngle, distance); //the diagonal position update based on angle and distance charX += diagonalChange[0]; charY += diagonalChange[1]; if (shipContainer) { //when the container is ready to be worked with shipContainer.x = charX; shipContainer.y = charY; } } private final function getDiagonalChange(angle:Number, distance:Number):Array { var rAngle:Number = angle * Math.PI/180; //convert degrees to radian return [Math.sin(rAngle) * distance, (Math.cos(rAngle) * distance) * -1]; } When the object is no longer moving, the event listener will be removed. The same method is being used for rotation. Everything works almost perfect. I've set the project's target FPS to 100 and created a FPS counter. According to the FPS counter, the average FPS in firefox is around 100, while the top is 1000 and the bottom is 22. I think that the bottom and top FPSs are only happening during the initialization of the client (startup). The problem is that the ship appears to be almost perfectly smooth, while it should be just that without the "almost" part. It's almost as if the ship is "flickering" very very fast, you can't actually see it but it's hard to focus on the object while it's moving with your eyes. Also, every now and then, there seems to be a bit of a framerate spike, as if the client is skipping a couple of frames, you then see it quickly warp. It is very difficult to explain what the real problem is, but in general it's that the movement is not perfectly smooth. So, do you have any suggestions on how to make the movement or transition of objects perfectly smooth? Update 1: I re-created the client to demonstrate my problem. Please check it out. The client: http://feedpostal.com/test/MovementTest.html The Actionscript Project (full source): http://feedpostal.com/test/MovementTest.rar An example of a smooth flash game (not created by me): http://www.gamesforwork.com/games/swf/Mission%20Racing_august_10th_2009.swf It took me a pretty long time to recreate this client side version, I hope this will help with solving the problem. Please note: yes, it is actually pretty smooth. But it is definitely not smooth enough.

  Read the article

• Embedded pdf object steals focus and will not let it go

  - by Kristian Hebert

  Hi guys, I was given the task of adding some usability to one of our applications, ie. make sure that every controll has a shortcut key, and that they can be reached by "tabbing" through the page. The gui runs in a IE. control on a winform, and consists of asp.net pages, so basically it is just asp.net always running in internet explorer. My problem is that one of the pages has an embeded pdf in it, like so: <object tabindex="-1" height="273" width="663" visible="false" type="Application/pdf" data="showpdf.ashx#navpanes=0"></object> showpdf.ashx is an httphandler, that streams the pdf contents to the response. It does not handle focus in any way. Now when I run this page, the pdf application steals focus, no matter what I do to set it to another control. And when it takes focus, I cannot take it back with the keyboard. Only a mouseclick on the page will set it to another control. I have tried to set focus in code behind OnPreRender, or in jevescript, but no luck. It seems that the http handler always runs after all the other code, and it sets focus on the pdf object. Any thought would be greatly appreciated.

  Read the article

• Set focus on textbox in WPF from view model (C#) & wPF

  - by priyanka.sarkar

  I have a TextBox and a Button in my view. Now I am checking a condition upon button click and if the condition turns out to be false, displaying the message to the user, and then I have to set the cursor to the text box control. if (companyref == null) { Lipper.Nelson.AdminClient.Main.Views.ContactPanels.CompanyAssociation cs = new Lipper.Nelson.AdminClient.Main.Views.ContactPanels.CompanyAssociation(); MessageBox.Show("Company does not exist.", "Error", MessageBoxButton.OK, MessageBoxImage.Exclamation); cs.txtCompanyID.Focusable = true; System.Windows.Input.Keyboard.Focus(cs.txtCompanyID); } The above code is in the view model. The CompanyAssociation is the view name. But the cursor is not getting set in the TextBox. The xaml is as under <igEditors:XamTextEditor KeyDown="xamTextEditorAllowOnlyNumeric_KeyDown" Name="txtCompanyID" ValueChanged="txtCompanyID_ValueChanged" Text="{Binding Company.CompanyId, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}" Width="{Binding ActualWidth, ElementName=border}" Grid.Column="1" Grid.Row="0" VerticalAlignment="Top" Margin="0,5,0,0" HorizontalAlignment="Stretch" IsEnabled="{Binding Path=IsEditable}" /> <Button Template="{StaticResource buttonTemp1}" Command="{Binding ContactCommand}" CommandParameter="searchCompany" Content="Search" Width="80" Grid.Column="2" Grid.Row="0" VerticalAlignment="Top" Margin="0" HorizontalAlignment="Left" IsEnabled="{Binding Path=IsEditable}" /> Please help

  Read the article

• Easy to use AutoHotkey/AutoIT alternatives for Linux

  - by Xeddy

  Hi all, I'm looking for recommendations for an easy-to-use GUI automation/macro platform for Linux. If you're familiar with AutoHotkey or AutoIT on Windows, then you know exactly the kind of features I need, with the level of complexity. If you aren't familiar, then here's a small code snippet of how easy it is to use AHK: InputBox, varInput, Please enter some random text... Run, notepad.exe WinWaitActive, Untitled - Notepad SendInput, %varInput% SendInput, !f{Up}{Enter}{Enter} WinWaitActive, Save SendInput, SomeRandomFile{Enter} MsgBox, Your text`, %varInput% has been saved using notepad! #n::Run, notepad.exe Now the above example, although a bit pointless, is a demo of the sort of functionality and simplicity I'm looking for. Here's an explanation for those who don't speak AHK: ----Start of Explanation of Code ---- Asks user to input some text and stores it in varInput Runs notepad.exe Waits till window exists and is active Sends the contents of varInput as a series of keystrokes Sends keystrokes to go to File - Exit Waits till the "Save" window is active Sends some more keystrokes Shows a Message Box with some text and the contents of a variable Registers a hotkey, Win+N, which when pressed executes notepad.exe ----End of Explanation---- So as you can understand, the features are quite obvious: Ability to easily simulate keyboard and mouse functions, read input, process and display output, execute programs, manipulate windows, register hotkeys, etc.. all being done without requiring any #includes, unnecessary brackets, class declarations etc. In short: Simple. Now I've played around a bit with Perl and Python, but its definitely no AHK. They're great for more advanced stuff, but surely, there has to be some tool out there for easy GUI automation? PS: I've already tried running AHK with Wine but sending keystrokes and hotkeys don't work.

  Read the article

• Why doesn't this method print its text? (java)

  - by David

  here's the method: public static int chooseStrat () { String[] strats = new String[1] ; strats[0] = "0 - Blob" ; int n ; boolean a = false ; while (a == false) ; { System.out.println ("Which strategy should the AI use?(#)") ; printArrayS (strats) ; n = getInt () ; System.out.println ("you selected "+n+"."+" are you sure you want the computer to use the "+ strats[n]+ " ?(Y/N)") ; String c = getIns () ; while ((((!( (c.equals ("y")) || (c.equals ("Y")) )) && (!( (c.equals ("n")) || (c.equals ("N")) ) ) ))) ; { System.out.println ("try again") ; c = getIns () ; } if ( (c.equals ("Y")) || (c.equals ("y")) ) a = true ; } return n ; } When i run this it never prints "Which strategy should the AI use?(#)" it just tries to get an entry from the keyboard. why does it do this?

  Read the article

• Android Live Wallpaper: waitForCondition(ReallocateCondition)

  - by jstatz

  I've been developing a live wallpaper using GLWallpaperService, and have gotten good results overall. It runs rock-solid in the emulator and looks good. I've dealt with OpenGL many times before so have a solid command of how to do things... unfortunately I'm having a hell of a time getting this to actually be stable on the actual hardware. The basic symption occurs when you slide the physical keyboard on a Motorola Droid in and out a few times. This causes the wallpaper to get destroyed/recreated several times in quick succession -- which would be fine, as I have my assets clearing in onDestroy and reloading in onSurfaceChanged. The problem is after a few iterations of this, (four or five, maybe) the calls to onSurfaceChanged completely stop, and i get an endless string of this printed to the log: 04-02 00:53:18.088: WARN/SharedBufferStack(1032): waitForCondition(ReallocateCondition) timed out (identity=337, status=0). CPU may be pegged. trying again. Is there something I should be implementing here aside from the Android-typical onSurfaceCreated/onSurfaceChanged/onSurfaceDestroyed triumvirate? Browsing through the WallpaperService and WallpaperRenderer classes doesn't pop up anything obvious to me.

  Read the article

• How to prove writing specifications beats code cowboys?

  - by Andrew Grant

  So I have a problem. Or rather my friend has a problem, since I would never write about my company on an internet forum. At my friend's company specification writing is, shall we say, a little underused. There's a deeply ingrained culture of writing code first and asking questions later, whether it's for a library routine or a new tool to inflict on their long suffering designers. This of course leads to situations where functionality is partially correct, incorrect, or just completely missing ("oh, just save before trying anything you may want to undo"). This usually results in a loss of productivity for those poor designers, or beta periods where bug-fixing is largely spent implementing things correctly. My friend's found his suggestions of writing (and testing against) specifications to be generally well received. Most of his colleagues have embraced the wonderful feeling of discovering false-assumptions on paper, instead of at 11pm on a Sunday in the middle of beta. Viva La Revolution! However there are a few who poo-poo anything that stands between their task and a keyboard. They laugh at the thought of actually designing anything, and write code with merry abandon. Mostly these are senior, long employed developers, reluctant to "waste time". The problem is that this second group of heretics invariably produce things (or at least something) quicker than the first. Subsequently this becomes justification along the lines of "It's pointless to write specifications for something as simple as an image resizer! Oh and those bugs where width!=height or the image uses RLE just need a few tweaks". And now the question :) Other than saying "told you so" at the end of a project, what are some good short-term ways to demonstrate how the practice of writing functional or technical specifications leads to better software in the long run? Cheers!

  Read the article

• Excel export displaying '#####...'

  - by Cypher

  I'm trying to export an Excel database into .txt (Tab Delimited), but some of my cells are quite large. When I export into a txt some of the cells are exported as '#######....' which is surprisingly useless. Has this happened to anyone else? Do you know an easy fix? Data from one cell of my column: Accounting, African Studies, Agricultural/Bioresource Engineering, Agricultural Economics, Agricultural Science, Anatomy/Cell Biology, Animal Biology, Animal Science, Anthropology, Applied Zoology, Architecture, Art History, Atmospheric/Oceanic Science, Biochemistry, Biology, Botanical Sciences, Canadian Studies, Chemical Engineering, Chemistry/Bio-Organic/Environmental/Materials,ChurchMusicPerformance, Civil Engineering/Applied Mechanics, Classics, Composition, Computer Engineering,ComputerScience, ContemporaryGerman Studies, Dietetics, Early Music Performance, Earth/Planetary Sciences, East Asian Studies, Economics, Electrical Engineering, English Literature/ Drama/Theatre/Cultural Studies, Entrepreneurship, Environment, Environmental Biology, Finance, Food Science, Foundations of Computing, French Language/Linguistics/Literature/Translation, Geography, Geography/ Urban Systems, German, German Language/Literature/Culture, Hispanic Languages/Literature/Culture,History,Humanistic Studies, Industrial Relations, Information Systems, International Business, International Development Studies, Italian Studies/Medieval/Renaissance, Jazz Performance, Jewish Studies, Keyboard Studies, Kindergarten/Elementary Education, Kindergarten/Elementary Education/Jewish Studies,Kinesiology, Labor/Management Relations, Latin American/Caribbean Studies, Linguistics, Literature/Translation, Management Science, Marketing, Materials Engineering,Mathematics,Mathematics/Statistics,Mechanical Engineering, Microbiology, Microbiology/Immunology, Middle Eastern Studies, Mining Engineering, Music, Music Education, MusicHistory,Music Technology,Music Theory,North American Studies, Nutrition,OperationsManagement,OrganizationalBehavior/Human Resources Management, Performing Arts, Philosophy, Physical Education, Physics, Physiology, Plant Sciences, Political Science, Psychology, Quebec Studies, Religious Studies/Scriptures/Interpretations/World Religions,ResourceConservation,Russian, Science for Teachers,Secondary Education, Secondary Education/Music, Secondary Education/Science, SocialWork, Sociology, Software Engineering, Soil Science, Strategic Management, Teaching of French/English as a Second Language, Theology, Wildlife Biology, Wildlife Resources, Women’s Studies.

  Read the article

• Unable to convert from Julian INT date to regular TSQL Datetime

  - by Bluehiro

  Help me Stackoverflow, I'm close to going all "HULK SMASH" on my keyboard over this issue. I have researched carefully but I'm obviously not getting something right. I am working with a Julian dates referenced from a proprietary tool (Platinum SQL?), though I'm working in SQL 2005. I can convert their "special" version of Julian into datetime when I run a select statement. Unfortunately it will not insert into a datetime column, I get the following error when I try: The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value. So I can't setup datetime criteria for running a report off of the Stored Procedure. Original Value: 733416 Equivalent Calendar Value: 01-09-2009 Below is my code... I'm so close but I can't quite see what's wrong, I need my convert statement to actually convert the Julian value (733416) into a compatible TSQL DATETIME value. SELECT org_id, CASE WHEN date_applied = 0 THEN '00-00-00' ELSE convert(char(50),dateadd(day,date_applied-729960,convert(datetime, '07-25-99')),101) END AS date_applied, CASE WHEN date_posted = 0 THEN '00-00-00' ELSE convert(char(50),dateadd(day,date_posted-729960,convert(datetime, '07-25-99')),101) END AS date_posted from general_vw

  Read the article

• Struggling with currency in Cocoa.

  - by Meltemi

  I'm trying to do something I'd think would be fairly simple: Let a user input a dollar amount, store that amount in an NSNumber (NSDecimalNumber?), then display that amount formatted as currency again at some later time. My trouble is not so much with the setNumberStyle:NSNumberFormatterCurrencyStyle and displaying floats as currency. The trouble is more with how said numberFormatter works with this UITextField. I can find few examples. This thread from November and this one give me some ideas but leaves me with more questions. I am using the UIKeyboardTypeNumberPad keyboard and understand that I should probably show $0.00 (or whatever local currency format is) in the field upon display then as a user enters numerals to shift the decimal place along: Begin with display $0.00 Tap 2 key: display $0.02 Tap 5 key: display $0.25 Tap 4 key: display $2.54 Tap 3 key: display $25.43 Then [numberFormatter numberFromString:textField.text] should give me a value I can store in my NSNumber variable. Sadly I'm still struggling: Is this really the best/easiest way? If so then maybe someone can help me with the implementation? I feel UITextField may need a delegate responding to every keypress but not sure what, where and how to implement it?! Any sample code? I'd greatly appreciate it! I've searched high and low... Edit1: So I'm looking into NSFormatter's stringForObjectValue: and the closest thing I can find to what benzado recommends: UITextViewTextDidChangeNotification. Having really tough time finding sample code on either of them...so let me know if you know where to look?

  Read the article

• - (void)keyboardWasShown not called when switching to another UITextField

  - by Shawn

  I'm having a strange problem that I don't understand. I have a UIScrollView with several UITextField objects. When I switch to the view, I set the first UITextField as firstresponder, and the keyboardWasShown method gets called due to the UIKeyboardDidShowNotification that the view is registered for. The weird thing is, when I touch the next UITextField, the keyboardWasShown method is not called. I don't understand this, since Apple's documentation says "If your interface has multiple text fields, the user can tap between them to edit the values in each one. When that happens, however, the keyboard does not disappear but the system does still generate UIKeyboardDidShowNotification notifications each time editing begins in a new text field." My code I've copied directly from Apple's documentation as well, and it works properly, but it only gets called the first time. What am I missing? - (void)registerForKeyboardNotifications { [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(keyboardWasShown:) name:UIKeyboardDidShowNotification object:nil]; [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(keyboardWasHidden:) name:UIKeyboardDidHideNotification object:nil]; } - (void)keyboardWasShown:(NSNotification *)aNotification { //if (keyboardShown) return; NSDictionary* info = [aNotification userInfo]; CGSize kbSize = [[info objectForKey:UIKeyboardBoundsUserInfoKey] CGRectValue].size; CGRect bkgndRect = activeField.superview.frame; bkgndRect.size.height += kbSize.height; [activeField.superview setFrame:bkgndRect]; [scrollView setContentOffset:CGPointMake(0.0, activeField.frame.origin.y) animated:YES]; keyboardShown = YES; UIBarButtonItem *doneButton = [[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemDone target:self action:@selector(done)]; self.navigationItem.rightBarButtonItem = doneButton; [doneButton release]; }

  Read the article

• how could installations/configurations be easier in linux?

  - by ajsie

  although you can do anything in linux it tends to require a lot of tweaking in config files and reading a lot of manuals/tutorials before you can have it running in your way. i know that it gets a lot easier by time, and the apt-get installations with ubuntu/debian is heading the right way. but how can linux be more userfriendly for us in the future? i thought that if more is automated like an IDE environment, eg. typing svn will give us all the commands and description about each command when you move between commands with your keyboard. that would be great. but that's just one example. another is the navigation in the terminal between folders. now you have to type a lot just to jump from/to different folders. would be great with some more automatization here too. i know that these extra features will slow down the server, but its 2010 now, and these features are not that heavy for the cpu, but makes it more userfriendly and encourage maintainance of a server, not frighten u off. what do you think about this? should/could we have more user friendly linux environment in servers, something that has annoyed you a lot? a lot of things are done in the unix way, but maybe we should reinvent the wheel in some areas, cause apparently, its so...repeatingly today and difficult to do easy tasks. it should be easier i think..

  Read the article

• Wrong item checked when filtering ListView in android

  - by aspartame

  I have a ListView with multiple choice entries where some are checked from the beginning using setItemChecked(position, true); I combine this with the filtering option setTextFilterEnabled(true) so it's easy to find a specific entry in the list. The problem is that when I filter the list the entries switch position in the list view. Take for example three entries: 'A', 'B' and 'C' where 'C' is checked beforehand (i.e. the entry at position 3 in the list). When I type a 'C' on the keyboard, only the 'C' entry is displayed (as intended). Now 'C' is not checked anymore, since the entry has moved from the checked position 3 to the unchecked position 1 in the list. This behavior leads to some not very welcome effects in the app. Is there a way to "move the selection with the filtering", i.e. bind the checked state to the entry and not to its initial position in the list? Or do I need to find a new approach? Thanks, Linus

  Read the article

• How to move to next textfield using keyboardtype numberandpunctuation using textfield notification

  - by Rani

  Hi guys, I am having code ItemsController.h UITextField* quantity; UITextField* rate; UITextField* tax2; ItemController.m quantity=[[UITextField alloc]initWithFrame:CGRectMake(158,10.5,140,30)]; quantity.textColor = [UIColor blackColor]; quantity.font = [UIFont systemFontOfSize:15.0]; quantity.backgroundColor = [UIColor clearColor]; quantity.returnKeyType=UIReturnKeyNext; quantity.keyboardType = UIKeyboardTypeNumbersAndPunctuation; quantity.leftViewMode = UITextFieldViewModeAlways; quantity.delegate = self; rate=[[UITextField alloc]initWithFrame:CGRectMake(158,10.5,140,30)]; rate.textColor = [UIColor blackColor]; rate.font = [UIFont systemFontOfSize:15.0]; rate.backgroundColor = [UIColor clearColor]; rate.returnKeyType=UIReturnKeyNext; rate.keyboardType = UIKeyboardTypeNumbersAndPunctuation; rate.leftViewMode = UITextFieldViewModeAlways; rate.delegate = self; tax2=[[UITextField alloc]initWithFrame:CGRectMake(158,10.5,140,30)]; tax2.textColor = [UIColor blackColor]; tax2.font = [UIFont systemFontOfSize:15.0]; tax2.backgroundColor = [UIColor clearColor]; tax2.returnKeyType=UIReturnKeyDone; tax2.keyboardType = UIKeyboardTypeAlphabet; tax2.leftViewMode = UITextFieldViewModeAlways; tax2.delegate = self; - (BOOL)textFieldShouldReturn:(UITextField*)textField { if(textField==quantity) { [rate becomeFirstResponder]; } if(textField == rate) { [tax2 becomeFirstResponder]; } else if(textField==tax2) { [textField resignFirstResponder]; } return YES; } Using UITextfield notifications while I am moving from quantity textfield to rate textfield the keyboard type is alphabetical its getting actually I gav eit has Number and punctuation why I am not getting. can any one help me to solve this as soon as possible. Thanks in advance.

  Read the article

• Stop UITextView from jumping when programatically setting text

  - by Michael Waterfall

  Hi there, I have to update a small amount of text in a scrolling UITextView. I'll only be inserting a character where the cursor currently is, and I'll be doing this on a press of a button on my navigation bar. My problem is that whenever I call the setText method of the text view, it jumps to the bottom of the text. I've tried using contentOffset and resetting the selectedRange but it doesn't work! Here's my example: // Remember offset and selection CGPoint contentOffset = [entryTextView contentOffset]; NSRange selectedRange = [entryTextView selectedRange]; // Update text entryTextView.text = entryTextView.text; // Try and reset offset and selection [entryTextView setContentOffset:contentOffset animated:NO]; [entryTextView setSelectedRange: selectedRange]; Is there any way you can update the text without any scroll movement at all... as if they'd just typed something on the keyboard? Many thanks, Michael Edit: I've tried using the textViewDidChange: delegate method but it's still not scrolling up to the original location. - (void)textViewDidChange:(UITextView *)textView { if (self.programChanged) { [textView setSelectedRange:self.selectedRange]; [textView setContentOffset:self.contentOffset animated:NO]; self.programChanged = NO; } } - (void)changeButtonPressed:(id)sender { // Remember position self.programChanged = YES; self.contentOffset = [entryTextView contentOffset]; self.selectedRange = [entryTextView selectedRange]; // Update text entryTextView.text = entryTextView.text; }

  Read the article

• Problem with non blocking fifo in bash

  - by timdel

  Hi! I'm running a few Team Fortress 2 servers and I want to write a little management script. Basically the TF2 servers are a fg process which provides a server console, so I can start the server, type status and get an answer from it: ***@purple:~/tf2$ ./start_server_testing Auto detecting CPU Using AMD Optimised binary. Server will auto-restart if there is a crash. Console initialized. [bla bla bla] Connection to Steam servers successful. VAC secure mode is activated. status hostname: Team Fortress version : 1.0.6.1/15 3883 secure udp/ip : ***.***.133.31:27600 map : ctf_2fort at: 0 x, 0 y, 0 z players : 0 (2 max) # userid name uniqueid connected ping loss state adr Great, now I want to create a script which sends the command sm_reloadadmins to all my servers. The best way I found to do this is using a fifo named pipe. Now what I want to do is having this pipe readonly and non blocking to the server process, so I can write into the pipe and the server executes it, but still I want to write via console one the server, so if I switch back to the fg process of the server and I type status I want an answer printed. I tried this (assuming serverfifo is mkfifo serverfifo): ./start_server_testing < serverfifo Not working, the server won't start until something is written to the pipe. ./start_server_testing <> serverfifo Thats actually working pretty good, I can see the console output of the server and I can write to the fifo and the server executes the commands, but I can't write via console to the server anymore. Also, if I write 'exit' to the pipe (which should end the server) and I'm running it in a screen the screen window is getting killed for some reason (wtf why?). I only need the server to read the fifo without blocking AND all my keyboard input on the server itself should be send to the server AND all server ouput should be written to the console. Is that possible? If yes, how?

  Read the article

• Why does Cut/Paste of form components sometimes stop working in Delphi 2007 IDE?

  - by robsoft

  This is driving me crazy. I'm not going to take it anymore. I'm going to ask, even at the risk of eternal public humiliation! (If it's something really obvious or that I've done to the system myself). For reasons I've never quite had the patience to work out, every so often the form I'm working on in Delphi 2007's visual form editor goes 'pseudo-read-only'; I can add new components to the form, I can move/resize existing ones (and change any properties in the Object Inspector), and I can select a component and 'copy' it to the clipboard. But I'm completely unable to cut a component from the form, or paste a new copy down. I don't believe it's to do with the 'Lock Controls' Edit menu option as I can toggle this on or off and it has the effect it's supposed to - this disappearance of Cut & Paste happens on the right-click context menu, from the keyboard and from the main Edit menu - it's as if the form has become read only to thing to do with the clipboard. If I close the form in the IDE and then reopen it, everything starts working fine again (just as D1, D3, D5 and D7 always did for me, previously). I'm not going mad, as I'm sure I read something about why this happens on a newsgroup once and it's caught me out from time to time many many times in the last few months, but I've failed to find the newsgroup reference this evening and I've decided that, as more and more Delphi users seem to be making use of StackOverflow, it was worth asking here. Help - when I'm doing lots of form-work it drives me absolutely mad!

  Read the article

• Multiple undo managers for a text view

  - by Rui Pacheco

  Hi, I've a text view that gets its content from an attributed string stored in a model object. I list several of these model objects in a drawer and when the user clicks on one the text view swaps its content. I now need to also swap the undo manager for the text view. I initialise an undo manager on my model object and use undoManagerForTextView to return it to the text view, but something's not quite right. Strategically placed logging statements show me that everything's working as planned: on startup a new model object is initialised correctly and a non-null undo manager is always pulled by the text view. But when it comes to actually doing undo, I just can't get the behaviour I want. I open a window, type something and press cmd+z, and undo works. I open a window, type something, select a new model on the table, type something, go back to the first model and try to undo and all I get is a beep. Something on the documentation made me raise an eyebrow, as it would mean that I can't have undo with several model objects: The default undo and redo behavior applies to text fields and text in cells as long as the field or cell is the first responder (that is, the focus of keyboard actions). Once the insertion point leaves the field or cell, prior operations cannot be undone.

  Read the article

• UISearchDisplayController not working when created in code??

  - by Nick Bedford

  I'm working on a tab bar application and one of the tabs has a UISearchDisplayController hooked up to a UISearchBar. It's all connected up in the NIB and is working. When I tap the search bar, the Scope and Cancel buttons fly in etc, and the search delegate updates the results table correctly. However, I'm trying to implement the same code in the viewDidLoad message instead of the NIB, however when I delete the search display controller from the NIB and uncomment my code to create the same controller in the function, it doesn't work. It's as if there's some fundamental connection not being made so that all my search delegate functionality isn't being called. Here's my working NIB version of the Search Display Controller. It's hooked up to the search bar, the UINavigationController subclass (MASearchController) and the root view of that is hooked up as the searchContentsController. Now this is what you would expect to do in code to create the same, right? What I'm doing is leaving the UISearchBar in the NIB to eliminate one piece of the puzzle at a time in code. // [MASearchController viewDidLoad] UISearchDisplayController *searchController = [[[UISearchDisplayController alloc] initWithSearchBar:searchBar contentsController:[[self viewControllers] objectAtIndex:0]] autorelease]; [searchController setDelegate:self]; [searchController setSearchResultsDelegate:self]; [searchController setSearchResultsDataSource:self]; I've checked all objects at run time and they all check out. Essentially I've deleted the search display controller from the NIB and then put in the code to create it in the viewDidLoad message. Why would this not work? The search keyboard comes up but none of my search and button animation functionality work???

  Read the article

• Frame Accurate Browser Launchable Video Player ... ?

  - by cliftonc

  I have a requirement where I need to enable playback (full screen) of a h.264 MPEG4 (thanks for the correction!) video from a local network, launchable from a browser link on a Windows workstation, and be frame accurate. By frame accurate I mean that I need to be able to scrub through the video in the same way you would with a vtr, stop at a frame, and then move backwards and forwards frame by frame (it is for a very specific compliance requirement where have to be able to check every frame if there is something that is potentially against broadcasting guidelines). The application itself is used to capture notes while viewing the material, so the end model is for a dual monitor workstation, with a web form in one, the video playing full screen in the second (no issue launching the video and manually having to move it to the second screen), and then the user controls the video via keyboard shortcuts or a jog shuttle. I have looked at QT, but the java bindings seem to be dead or nearly so, flash isn't frame accurate, VLC given its streaming heritage seems to be only able to move forward by a frame and not backwards, and all I have left are commercial offerings that in my experience are difficult and expensive to change. Any ideas of where I should look or alternative options? Any advice appreciated!

  Read the article

• Delphi 2010 - Source files randomly become read-only in editor?

  - by Justin

  Does anyone else have this problem or is my Delphi cursed somehow? I'll have a bunch of forms and files open in tabs in the editor and I'll be typing away and then suddenly everything stops - my .pas file has, seemingly at random, become read-only. Sometimes I can just right-click the tab at the top and uncheck "Read-Only" and continue, but sometimes this option is checked and greyed-out (disabled), meaning I can't uncheck it and I can't make any further edits to the file. This too seems to be random. In the latter case, the only solution is to save the file in question, which works, despite Delphi's assertion that the file is read-only, close its tab in the editor, and re-open it. Not catastrophic, really, but it's starting to become annoying. Could it be that I am hitting a keyboard command combination accidentally to do this or is this a bug in Delphi? I'm in Delphi 2010, Windows 7. Doubt it's anything to do with installed packages, but if anyone wants the list I'll generate it and attach it here.

  Read the article

• TableView Cells unresponsive

  - by John Donovan

  I have a TableView and I wish to be able to press several cells one after the other and have messages appear. At the moment the cells are often unresponsive. I found some coed for a similar problem someone was kind enough to post, however, although he claimed it worked 100% it doesn't work for me. The app won't even build. Here's the code: -(UIView*) hitTest:(CGPoint)point withEvent:(UIEvent*)event { // check to see if the hit is in this table view if ([self pointInside:point withEvent:event]) { UITableViewCell* newCell = nil; // hit is in this table view, find out // which cell it is in (if any) for (UITableViewCell* aCell in self.visibleCells) { if ([aCell pointInside:[self convertPoint:point toView:aCell] withEvent:nil]) { newCell = aCell; break; } } // if it touched a different cell, tell the previous cell to resign // this gives it a chance to hide the keyboard or date picker or whatever if (newCell != activeCell) { [activeCell resignFirstResponder]; self.activeCell = newCell; // may be nil } } // return the super's hitTest result return [super hitTest:point withEvent:event]; } With this code I get this warning: that my viewController may not respond to pointsInside:withEvent (it's a TableViewController). I also get some faults: request for member 'visibleCells' in something not a structure or a union. incompatible type for argument 1 of pointInsideWithEvent, expression does not have a valid object type and similar. I must admit I'm not so good at reading other people's code but I was wondering whether the problems here are obvious and if so if anyone could give me a pointer it would be greatly appreciated.

  Read the article

• Build error with variables and url_for in Flask

  - by Rob

  Have found one or two people on the interwebs with similar problems, but haven't seen a solution posted anywhere. I'm getting a build error from the code/template below, but can't figure out where the issue is or why it's occurring. It appears that the template isn't recognizing the function, but don't know why this would be occurring. Any help would be greatly appreciated - have been pounding my against the keyboard for two nights now. Function: @app.route('/viewproj/<proj>', methods=['GET','POST']) def viewproj(proj): ... Template Excerpt: {% for project in projects %} <li> <a href="{{ url_for('viewproj', proj=project.project_name) }}"> {{project.project_name}}</a></li> {% else %} No projects {% endfor %} Error log: https://gist.github.com/1684250 EDIT: Also wanted to include that it's not recognizing the variable "proj" when building the URL, so it's just appending the value as a parameter. Here's an example: //myproject/viewproj?projname=what+up Last few lines: [Wed Jan 25 09:47:34 2012] [error] [client 199.58.143.128] File "/srv/www/myproject.com/myproject/templates/layout.html", line 103, in top-level template code, referer: xx://myproject.com/ [Wed Jan 25 09:47:34 2012] [error] [client 199.58.143.128] {% block body %}{% endblock %}, referer: xx://myproject.com/ [Wed Jan 25 09:47:34 2012] [error] [client 199.58.143.128] File "/srv/www/myproject.com/myproject/templates/main.html", line 34, in block "body", referer: xx://myproject.com/ [Wed Jan 25 09:47:34 2012] [error] [client 199.58.143.128] , referer: xx://myproject.com/ [Wed Jan 25 09:47:34 2012] [error] [client 199.58.143.128] File "/usr/lib/python2.7/dist-packages/flask/helpers.py", line 195, in url_for, referer: xx://myproject.com/ [Wed Jan 25 09:47:34 2012] [error] [client 199.58.143.128] return ctx.url_adapter.build(endpoint, values, force_external=external), referer: xx://myproject.com/ [Wed Jan 25 09:47:34 2012] [error] [client 199.58.143.128] File "/usr/lib/pymodules/python2.7/werkzeug/routing.py", line 1409, in build, referer: xx://myproject.com/ [Wed Jan 25 09:47:34 2012] [error] [client 199.58.143.128] raise BuildError(endpoint, values, method), referer: xx://myproject.com/ [Wed Jan 25 09:47:34 2012] [error] [client 199.58.143.128] BuildError: ('viewproj', {'proj': '12th'}, None), referer: xx://myproject.com/

  Read the article

• Strange activity stack behavior when using MapActivity

  - by AndroidDev

  I have the following activity structure in my application A simple "splash screen" activity is started when the application is fired up (let's call it "Splash"). This activity starts the main activity when the user presses a button (I will call it "Main"). Main can in turn start two activities from the menu. The first activity presents a simple form (let's call this one "Form"), the second is a MapActivity that presents a map (it is called "Map"). Main, Form, and Map are declared exactly the same in the manifest: <activity android:name="fully qualified activity class" android:screenOrientation="landscape" android:configChanges="keyboard|keyboardHidden|orientation" > <intent-filter> <action android:name="android.intent.action.DEFAULT" /> <category android:name="android.intent.category.DEFAULT" /> </intent-filter> </activity> When Main is active and I start Form and press "back", Main comes up again. Pressing "back" again brings up "Splash". Nothing strange here. Now comes the strange part: when I am in Main, start Map, and press "back", Main comes up as expected. But pressing "back" again just restarts Main. A second press on "back" is needed to bring me back to Splash! So it seems that starting the Map activity somehow results in Main ending up on the activity stack twice while starting the Form activity does not! Both Form and Map are started like this: startActivity(new Intent(this, MyActivity.class)); I don not catch the back key in any activity. Any clues on what is going on or how to debug this?

  Read the article

< Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >