Search Results

Search found 39047 results on 1562 pages for 'process control'.

Page 184/1562 | < Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >

  • HTB.init / tc behind NAT

    - by Ben K.
    I have an Ubuntu 10 box that I'm trying to set up as a bandwidth-shaping router. The machine has one WAN interface, eth0 and two LAN interfaces, eth1 and eth2. NAT is configured using MASQUERADE as described at InternetConnectionSharing. I'm mostly concerned with shaping outbound traffic from the LAN interfaces -- in the end, I'd like to end up with a hard 768Kbps limit per-LAN-interface (rather than a limit on eth0 pooled across all interfaces). I installed HTB.init, and riffing on the examples, tried to set this up on eth1 by putting three files into /etc/sysconfig/htb: /etc/sysconfig/htb/eth1 DEFAULT=30 R2Q=100 /etc/sysconfig/htb/eth1-2.root RATE=768Kbps BURST=15k /etc/sysconfig/htb/eth1-2:30.dfl RATE=768Kbps CEIL=788Kbps BURST=15k LEAF=sfq I can /etc/init.d/htb start and /etc/init.d/htb stats and see information that /seems/ to suggest it's working...but when I try pulling a large file via the WAN interface the shaping clearly isn't in effect. Any suggestions? My guess is it has something to do with where the shaping falls in the NAT chain, but I really have no idea where to begin troubleshooting this. ---- Update: Here's my /etc/init.d/htb list output, it seems to make sense -- the default rate for eth1 is 768Kbps? ### eth0: queueing disciplines qdisc htb 1: root refcnt 2 r2q 100 default 30 direct_packets_stat 0 qdisc sfq 30: parent 1:30 limit 127p quantum 1514b perturb 10sec ### eth0: traffic classes class htb 1:2 root rate 768000bit ceil 768000bit burst 1599b cburst 1599b class htb 1:30 parent 1:2 leaf 30: prio 0 rate 6144Kbit ceil 6144Kbit burst 15Kb cburst 1598b ### eth0: filtering rules filter parent 1: protocol ip pref 100 u32 filter parent 1: protocol ip pref 100 u32 fh 800: ht divisor 1 filter parent 1: protocol ip pref 100 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:30 match 00000000/00000000 at 12 match 00000000/00000000 at 16 ### eth1: queueing disciplines qdisc htb 1: root refcnt 2 r2q 100 default 30 direct_packets_stat 0 qdisc sfq 30: parent 1:30 limit 127p quantum 1514b perturb 10sec ### eth1: traffic classes class htb 1:2 root rate 768000bit ceil 768000bit burst 1599b cburst 1599b class htb 1:30 parent 1:2 leaf 30: prio 0 rate 6144Kbit ceil 6144Kbit burst 15Kb cburst 1598b

    Read the article

  • Permission / owner issue with pushing to git when editing directly from repo?

    - by Susan
    I have a web interface for deploying scripts from our repo at Github to our live server. The web interface just triggers a bash script with some git commands. If I make changes locally, push to repo, then run the bash script to pull from repo to live it works fine. However, if I make changes directly in the repo (via Github's web interface), I'm running into fast-forward / lock issues. These are the steps I'm taking: Make a change on a file at Github repo Run a bash script (as apache) via web from live server that attempts a git push / pull. Get these problems: PUSH To [email protected]:name/name.git ! [rejected] master - master (non-fast-forward) error: failed to push some refs to '[email protected]:name/name.git' To prevent you from losing history, non-fast-forward updates were rejected Merge the remote changes before pushing again. See the 'Note about fast-forwards' section of 'git push --help' for details. PULL From github.com:name/name branch master - FETCH_HEAD error: unable to unlink old 'includes/footer.inc' (Permission denied) Updating 8f6d922..d1eba9d Updating 8f6d922..d1eba9d SSH in as root, attempt a push / pull and it works fine. Ideas on why would this method not work from apache?

    Read the article

  • Measure Total Bandwidth for Billing

    - by TonyZ
    I am setting up a new network which customers will host their applications on. It needs to be able to scale out to a few hundred servers and each server will have several VMs on it. Right now in my test environment, after the telco router, we are using a Linux router/firewall which is then connected to a Layer 2 switch. Could be a layer 3 in the future. I need to track total bandwidth per VM for each machine, and I need to do it in a way that it is not part of the VM. Each VM will have a private class ip address which is Natted by the gateway, or we may eventually run more than firewall/reverse proxy off a layer 3 switch. So my thinking is that I can do it off of a promiscuous port on the switches, or at the gateway firewall. I would like to have an out of the box solution, preferably open source. Does anyone have suggestions on the easiest way to set this up, and the easiest tool to use. I have looked at the web sites for Nagios, Zenoss, Zabbix, ntops on the firewall, etc. It is hard to ascertain just from the web sites if they do exactly this or not. Obviously, performance is also somewhat key here. Anything running on the gateway should not drag it down doing traffic accounting. Thanks for any thoughts. Tony Zakula

    Read the article

  • Media Center setup won't complete for watching TV

    - by Robert
    I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. This problem occurs on all channels, live or recorded. The bottom 5th of the screen is solid green. I know the problem is Media Center because I can use Pinnacle's TVCenterPro to watch TV and there is no skipping/pausing (and not green on bottom). I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing TV okay (with the new DirecTV) before I tried to run setup. (I ran setup to try to do recording with Media Center.) Hardware/Software: Pinnacle PCTV 800i HD PCI card (coax cable from DirecTV tuner), ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

    Read the article

  • Office jukebox systems

    - by jonayoung
    We're looking for a good office jukebox solution where staff can select songs via a web interface to be played over the central set of speakers. Must haves: Web Interface RSS / easy to scrap display of currently playing songs Ability to play mp3s and manage an ordered playlist. Good cataloguing of media. Multiple OSs supported as clients - Windows, Mac, Fedora Linux (will probably be accomplished by virtue of a web interface). We have tried XBMC which worked well as a proof of concept however the web interface is just too immature and has too many bugs for a reliable multi-user solution. I believe the same will be true of boxee. Nice to have: Ability to play music videos onto a monitor Ability to listen to radio streams specifically Shoutcast and the BBC. Ability to run on Linux is a nice to have but windows solutions which worked well would certainly be considered. I am aware of question 61404 and don't believe this to be a duplicate due to the specific requirements.

    Read the article

  • Live Camera capturing and printing software

    - by Matt
    I'm running a Haunted House exhibit at my school to raise money, and I had the idea of taking pictures of the "victims"/students remotely with my Sony DSLR camera and then printing and selling the photos as the students exit the haunted House (much like amusement parks do with roller coasters as you go down the final drop, or when one takes pictures with Santa Claus at the mall). Does anyone know of any free/relatively inexpensive software that would allow me to do this? I would prefer Mac-compatibility, but it's not a requirement.

    Read the article

  • Per connection bandwidth limit

    - by Kyr
    Apparently, our server box running Windows Server 2008 R2 has a per connection bandwidth limit of 0.2 MB/s. Meaning, while one TCP connection can pull at max 0.2 MB/s, 60 parallel connections can pull 12 MB/s. We first noticed this when trying to checkout large SVN repository from this server. I used a simple Java application to test this, transferring data from server to workstation using variable number of threads (one connection per thread). Server part of the application simply writes 1 MB memory buffer to socket 100 times, so there is no disk involvement. Each connection topped at 0.2 MB/s. Same per connection limit was for only one as was for 60 parallel connections. The problem is that I have no idea from where this limit comes from. I have very little experience administrating Windows Server, so I was mostly trying to find something by googling. I have checked the following: Local Computer Policy QoS Packet Scheduler Limit reservable bandwidth: it's Not configured; Group Policy Management Console: we have two GOPs, but neiher has any Policy-based QoS defined; There isn't any bandwidth limiter program installed, as far as I can tell. We're using standard Windows Firewall. I can update this question with any additional information if needed.

    Read the article

  • Lightest Linux Desktop supporting Firefox/graphic browser

    - by Susan Mayer
    I am on Windows and I have a remote server with Ubuntu 10.10. I want to use Firefox or other graphic browser on that remote server. The problem is, the server's memory is only 512MB, so I can install larger desktop environment. I used to use XFCE and NoMachine NX, but they consume too much memory on that Ubuntu server. The only thing I want to use is a graphic browser (for example firefox) on that server. Nothing else. Do you have any good suggestions? Thanks a lot!

    Read the article

  • Grant HTTP access based on unix user group

    - by Sander Marechal
    Is it possible to grant network access or HTTP access based on a user's group? At my company we want to set up an internal composer server using Satis to manage packages for the projects we write (e.g. on repository.mycompany.com), with the packages themselves in our SVN server (svn.mycompany.com). We have several webservers with many different users on them. Some users should be able to reach the composer and SVN server. Some should not. Users that should be able to reach these servers all belong to the same group. How can I set up Apache on the Composer and SVN server to only grant access to those users in that group? Alternatively, can I set up the webservers in such a way that only users from that group are able to make a connection to our Composer and SVN servers? The best thing we have come up with so far is using SSL client certificates. We simply place a client certificate on all servers which can be used to access Composer and SVN. Only the right usergroup will have read access to the certificate. A bit clunky but it may work. But I'm looking for something better.

    Read the article

  • Port based bandwidth shaping

    - by nixnotwin
    I have an interent connection with the speed of 4000k bits up and down. I want to do port based traffic shaping on a ubuntu machine, which acts as router. eth0 is the WAN interface. This is how I would like to allocate bandwidth: For ports 80 and 445 the bandwidth usage can go upto 90% For ports above 1024 upto 65535 the bandwidth usage can go upto 10% For remaining ports the bandwidth usage can go upto 40% The easiest way for achieving the above is using a router with tomato firmware. I have used it and it is very efficient. I want to try if it can be done on a Ubuntu or any GNU/Linux machine. I have googled extensively about the topic and I feel there isn't much information.

    Read the article

  • Open source system for swipe card access?

    - by Moduspwnens
    We're looking at replacing our campus-wide magnetic swipe card system with something more robust. The "programmer" side of me says there's got to be an open-source, scalable solution that already does this, but all I've been able to find are proprietary vendor-specific solutions. Ideally, it'd have the following: Based on some open standard that allows us to select from a wide selection of card readers (like IMAP or HTTP) Support different kinds of card access (magnetic strip, RFIDs, etc.) Future-proof (to the extent possible) The lack of information I'm finding leads me to believe I'm not searching for the right things... or such a solution doesn't exist. Is there not some basic, open-source solution to this (like MySQL for databases, or Moodle for an LMS, or Apache for a web server)?

    Read the article

  • Send keystrokes simultaneously to both host and slave over internet?

    - by donodarazao
    I would like to watch movies with a friend who lives far away from me. For this, the playback should be synchronized on both our pc. However, we have some constraints: Due to our low bandwidth internet, any form of streaming solution wouldn't work. We do however both have the same copy of the movie on our harddisks. We use movies to learn languages and because of this, we very frequently pause and rewind. The typical "3...2...1...go!" solution over skype wouldn't work because it would soon get out of sync. I imagine an approach that sends keystrokes simultaneously to both our pc would work (for example, if I press space to pause the movie at my pc, space should also be send to his pc). Any ideas how this could be realized? I looked into Synergy and InputDirector, but both neither seem to be an option, because I don't want to see the desktop of my friend, I want to see my desktop Keystrokes should be sent simultaneously to both pc, not just to one pc We have both Windows 7x64, and we might use any media player (VLC, XBMC,...).

    Read the article

  • Running Visual Studio 2010 in a University Campus

    - by Woondows
    We have just installed Windows 7 Enterprise x64 in one of our computer labs being used by students for programming. However, when we installed Visual Studio 2010 Ultimate on the machines, we found that to even launch the application (devenv.exe), required the student to enter the administrator password (the usual UAC prompt). Of course, we could just turn off UAC, but that would defeat the purpose of having it in Windows 7. On the other hand, we cannot really give the students local administrator privilege, as we are concerned that they will do some malicious stuff on the computers. Previously when we used Windows XP Professional running Visual Studio 2005, we had no problems. Kindly advise if there's any workaround for this. EDIT: Thanks for the answer guys. Mayank, your links may work for Visual Studio .Net, but it doesn't seem to work for Visual Studio 2010. Ryan, Tieson, I'm intrigued that you guys managed to get it working easily. FYI I don't manage the Group Policies, but I can get them changed if necessary. Any particular GP that I should be looking at? Suggestions to how to troubleshoot further why UAC is being invoked? At least now I know for sure that this is not supposed to be the default behaviour for Visual Studio 2010 so I'm going to keep digging for a solution. Will try running Procmon and see if i can find something..

    Read the article

  • haproxy access list using path_dir having issues with firefox

    - by user11243
    I'm trying to route all requests containing a path directory of /socket.io/ to a separate port with HAProxy. Here is my config file: global maxconn 4096 # Total Max Connections. This is dependent on ulimit nbproc 2 defaults mode http frontend all 0.0.0.0:80 timeout client 86400000 default_backend web_servers acl is_stream path_dir socket.io use_backend stream_servers if is_stream backend web_servers balance roundrobin option forwardfor # This sets X-Forwarded-For timeout server 30000 timeout connect 4000 server web1 127.0.0.1:4000 weight 1 maxconn 1024 check backend stream_servers balance roundrobin option forwardfor # This sets X-Forwarded-For timeout queue 5000 timeout server 86400000 timeout connect 86400000 server stream1 127.0.0.1:5100 weight 1 maxconn 1024 check URL paths with a /socket.io/ get correctly directed to port 5100 in chrome and safari. However not for firefox. I'm running Haproxy locally on my mac for dev, not sure if it has anything to do with it. I'm using haproxy 1.4.8 and Firefox 3.6.15. I've tried clearing cache on firefox and it didn't help, so I'm thinking there's something wrong with the way HAProxy parses through the Firefox request headers.

    Read the article

  • iptables: limiting bytes downloaded per IP per day?

    - by Miles
    On a public-facing web server, I'd like to limit the total bytes downloaded per IP address per day. For example, after a visitor downloaded 100MB, any additional requests would be dropped or rejected for the next 24 hours. Is it possible to accomplish this using iptables alone? The connbytes, connlimit, hashlimit, quota, and recent options all look promising, but the man page plays its cards close to the vest (e.g., "quota - Implements network quotas by decrementing a byte counter with each packet. --quota bytes The quota in bytes."). Would like to avoid using a proxy (like Squid) if possible.

    Read the article

  • How can I allow individual developers to have their own space to create git repositories?

    - by Jason Baker
    I have a server that is essentially a gitosis setup. I have a git user that has access to all the shared repositories. What I would like to do is have each developer be able to have their own "area" on this server to create their own repositories. I'd like these areas to be able to be viewable via gitweb. How can this be done that would require the least maintenance in terms of adding users and repositories? One obvious solution would be to just allow each developer to create repositories on the git login and have branches named something like <devname>-<reponame>. But I could see this getting unmanageable as the number of developers grows.

    Read the article

  • Regression testing for firewall changes

    - by James C
    We have a number of firewalls in place around our organisation and in some cases packets can pass through four levels of firewall limiting the flow TCP traffic. A concept that I'm used to from software testing is regression testing, allowing you to run a test suite against a changed application to verify that the new changes haven't affected any old features. Does anyone have any experience or an offer any solutions to being able to perform the same type of thing with firewall changes and network testing? The problem becomes a lot more complicated because you'd ideally want to be originating (and testing receipt) of packets across many machines.

    Read the article

  • Squid Proxy Server: limit total bandwidth

    - by Pitto
    Hello my dear friends! We have a marvellous squid proxy with dansguardian for filetering and they both work just great. Is there any easy way to limit the total bandwidth usage? I'd like to set the max amount of squid users internet use to 1200 since our total band is 2000 and I need the rest to ensure other services such as voip to work without hiccups related to huge downloads on the "internet side" of our connection and similar issues. I mean a total squid bandwidth limitation and not a user-based. Fair thanks to everybody.

    Read the article

  • One server with multiple desktops "heads" with VNC

    - by Alexis K
    I am managing a system of kiosks. Each kiosk currently is running a web browser with the application for the kiosk running in the browser. Each kiosk needs to be able to display separate content. At times, the application running in the web browser freezes. Thus, I have to go out to the site to refresh the page. I want to see if there is a way to have one central server that has multiple browser heads. Then each kiosk would run a program like VNC to display one of the heads. This way when the program freezes, I just have to login to the central server and refresh the page. Getting VNC or another remote desktop software installed on the clients is no problem. What I am looking for is a way to have VNC remote into a specific head of a head of a web browser. Does such a thing exist? Or do I have to run a VM for each kiosk to remote into? Any advice, pointers, or solutions would be helpful.

    Read the article

  • Git clone/pull across local network

    - by Tom Sarduy
    I'm trying to clone/pull a repository in another PC using Ubuntu Quantal. I have done this on Windows before but I don't know what is the problem on ubuntu. I tried these: git clone file:////pc-name/repo/repository.git git clone file:////192.168.100.18/repo/repository.git git clone file:////user:pass@pc-name/repo/repository.git git clone smb://c-pc/repo/repository.git git clone //192.168.100.18/repo/repository.git Always I got: Cloning into 'intranet'... fatal: '//c-pc/repo/repository.git' does not appear to be a git repository fatal: The remote end hung up unexpectedly or fatal: repository '//192.168.100.18/repo/repository.git' does not exist More: The other PC has username and password Is not networking issue, I can access and ping it. I just installed git doing apt-get install git (dependencies installed) I'm running git from the terminal (I'm not using git-shell) What is causing this and how to fix this? Any help would be great! UPDATE I have cloned the repo on Windows using git clone //192.168.100.18/repo/intranet.git without problems. So, the repo is accessible and exist! Maybe the problem is due user credentials?

    Read the article

  • Mikrotik queues and limiting total upstream bandwidth

    - by g18c
    With a Mikrotik router (form of embedded Linux) I have created simple queues per machine matched by source IP address. Each of the 4 machine queues has an unlimited burst 3Mbps/3Mbps for Tx/Rx. During speedtest.net on all 4 machines at the same time, each machine shows 3Mbps (and is limited correctly there), however the total bandwidth on the uplink goes to 12Mbps (i need to set this to 10Mbps max for the upstream). I want to restrict the actual traffic passing across the uplink port to 10Mbps regardless of what the other queues are doing (I need this catch all queue to have the final say on the uplink speed). For example I need: Scenario A Machine A transferring @ 3Mbps Machine B transferring @ 3Mbps Machine C transferring @ 3Mbps Machine D transferring @ 0Mbps Up-link speed = 9Mbps Scenario B Machine A trying to transfer @ 3Mbps Machine B trying to transfer @ 3Mbps Machine C trying to transfer @ 3Mbps Machine D trying to transfer @ 3Mbps Up-link speed = 10Mbps Actual transfer speed of machine A,B,C,D = 2.5Mbps This is to allow slight over subscription of bandwidth queues as not all will be transmitting at 3Mbps all the time. Is this possible and if so how would one go about doing this?

    Read the article

  • Rebasing a branch which is public

    - by Dror
    I'm failing to understand how to use git-rebase, and I consider the following example. Let's start a repository in ~/tmp/repo: $ git init Then add a file foo $ echo "hello world" > foo which is then added and committed: $ git add foo $ git commit -m "Added foo" Next, I started a remote repository. In ~/tmp/bare.git I ran $ git init --bare In order to link repo to bare.git I ran $ git remote add origin ../bare.git/ $ git push --set-upstream origin master Next, lets branch, add a file and set an upstream for the new branch b1: $ git checkout -b b1 $ echo "bar" > foo2 $ git add foo2 $ git commit -m "add foo2 in b1" $ git push --set-upstream origin b1 Now it is time to switch back to master and change something there: $ echo "change foo" > foo $ git commit -a -m "changed foo in master" $ git push At this point in master the file foo contain changed foo, while in b1 it is still hello world. Finally, I want to sync b1 with the progress made in master. $ git checkout b1 $ git fetch origin $ git rebase origin/master At this point git st returns: # On branch b1 # Your branch and 'origin/b1' have diverged, # and have 2 and 1 different commit each, respectively. # (use "git pull" to merge the remote branch into yours) # nothing to commit, working directory clean At this point the content of foo in the branch b1 is change foo as well. So what does this warning mean? I expected I should do a git push, git suggests to do git pull... According to this answer, this is more or less it, and in his comment @FrerichRaabe explicitly say that I don't need to do a pull. What's going on here? What is the danger, how should one proceed? How should the history be kept consistent? What is the interplay between the case described above and the following citation: Do not rebase commits that you have pushed to a public repository. taken from pro git book. I guess it is somehow related, and if not I would love to know why. What's the relation between the above scenario and the procedure I described in this post.

    Read the article

< Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >