Search Results

Search found 14205 results on 569 pages for 'remote monitor'.

Page 184/569 | < Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >

• Java: How do I get the IP of the local interface that can reach a remote IP?

  - by Per Fagrell

  I have a Java application that registers a server component in a service provider, and then sends the service name to a client. The client uses the service name to get an address out of the service provider to the server. However, the server has several interfaces only 1 of which the client get get at, so the service must be registered with the right IP. We discovered the client through a broadcast, so I have the client IP and an Enumeration of the computers network interfaces. How do I match the IP to an interface, not knowing what the netmask of the client IP is? Spontaneously I imagine turning all the addresses to ints and chomping the local ips with their netmask and looking for a 'best match', but I wonder if there is a better way? (this is an enterprise(tm) solution, so cutting out the service provider isn't an option, at least not w/o a political campaign first ;) )

  Read the article

• How do I accept all changes from a remote?

  - by e-satis

  I'm doing a pull origin some_branch and can see there are a lot of changes. Eventually I don't mind if their erase all mine. How can I accept them all instead or using mergetool and merge files one by one?

  Read the article

• How can i find and take in my local machine any file in remote machine?

  - by programmerist

  i try to write any codes. For example i have 2 machine: A computer, B computer. My local machine A computer. i also have sql data base . with "select * from" i can learn PatientID. ForExample PatientID :123456. But this patient's pictures file in B Computer.Picture File Name is equal to PatientID. B Computer ports is open for me. I can listen B Computer's 51124 port. How can i get Files from B machine via Port(But this files includes pics ). But this is Windows App. But i don't know files path. My program must find it automatically

  Read the article

• Is it possible to access a remote SWF without needing to download it?

  - by Trap

  We have a very large SWF hosted in a website which is just a repository of hundreds of movies/symbols. We load this SWF at the beginning with the Loader class but then the client will access a very few of them at that moment. Is it possible to tell the loader to download symbols only when they're needed? (as with applicationDomain.getDefinition(...)). Thanks in advance.

  Read the article

• PHP - login to a remote server, trough my own server, with HTTPS, cookies and proxy, and downloading the html

  - by Yunga Mohani

  Hello, so what i am trying to do is this: login to the other server with a PHP on my own server (either with my username and pass/or with my cookies) then have access to the page i want to display/download i want to write a PHP script that is located on my own server, that automatically does a login to another server, that uses HTTPS and a web form for login. after the login i have access to that page that i am trying to download. i dont know if it would be possible to login and download the html only with the cookies that i have in my browser through a previous login, or if i need to do the login in my php script through some https login method. can i do any of this with curl or fsocksopen or what would be the best way to realize this? thanks in advance!

  Read the article

• Multiple monitors (3) in notebook using HDMI and vga port, with a graphic card only.

  - by user34427

  I have a HP dv9830us laptop. It has a vga-out and a hdmi-out port. I want to know if it's possible to use 3 devices, each one with different displays, using just one graphic card - NVIDIA GeForce 8600M GS? (Original, vga with an external monitor and hdmi with a full hd tv). Where I can find this kind of information? If not possible, I would like to know alternatives like: "Usb" solutions to be possible to connect to the external lcd or to a TV. The TV should be flawless, but the second monitor can have slow response times; Cheap PCMCIA video cards to be possible to connect to an external monitor, so I would use the hdmi with the tv and this second video card to output to another monitor. I'm using Windows 7 and Ubuntu 10.04. Is this possible in both systems?

  Read the article

• Case Study: Polystar Improves Telecom Networks Performance with Embedded MySQL

  - by Bertrand Matthelié

  Polystar delivers and supports systems that increase the quality, revenue and customer satisfaction of telecommunication services. Headquarted in Sweden, Polystar helps operators worldwide including Telia, Tele2, Telekom Malysia and T-Mobile to monitor their network performance and improve service levels. Challenges Deliver complete turnkey solutions to customers integrating a database ensuring high performance at scale, while being very easy to use, manage and optimize. Enable the implementation of distributed architectures including one database per server while maintaining a low Total Cost of Ownership (TCO). Avoid growing database complexity as the volume of mobile data to monitor and analyze drastically increases. Solution Evaluation of several databases and selection of MySQL based on its high performance, manageability, and low TCO. The MySQL databases implemented within the Polystar solutions handle on average 3,000 to 5,000 transactions per second. Up to 50 million records are inserted every day in each database. Typical installations include between 50 and 100 MySQL databases, up to 300 for the largest ones. Data is then periodically aggregated, with the original records being overwritten, as the need for detailed information becomes unnecessary to operators after a few weeks. The exponential growth in mobile data traffic driven by the proliferation of smartphones and usage of social media requires ever more powerful solutions to monitor, analyze and turn network data into actionable business intelligence. With MySQL, Polystar can deliver powerful, yet easy to manage, solutions to its customers. MySQL-based Polystar solutions enable operators to monitor, manage and improve the service levels of their telecom networks in over a dozen countries from a single location. The new and innovative MySQL features constantly delivered by Oracle help ensure Polystar that it will be able to meet its customer’s needs as they evolve. “MySQL has been a great embedded database choice for us. It delivers the high performance we need while remaining very easy to use, manage and tune. Power and simplicity at its best.” Mats Söderlindh, COO at Polystar.

  Read the article

• Oracle Fusion Middleware 12c Updates (2013/10/17)

  - by Hiro

  Oracle Fusion Middleware 12c Media Pack ?????2013/10/17 ???????????????? 1. Oracle Tuxedo?? Oracle Tuxedo System and Applications Monitor Plus 12c Release 1 (12.1.1.1) for Oracle Tuxedo 9.1 for Linux x86 (32-bit) Oracle Tuxedo System and Applications Monitor Plus 12c Release 1 (12.1.1.1) for Oracle Tuxedo 9.1 for HP-UX PA-RISC (32-bit) Oracle Tuxedo System and Applications Monitor Plus 12c Release 1 (12.1.1.1) for Oracle Tuxedo 11.1.1.2.0 for HP-UX Itanium (64-bit) Oracle Service Architecture Leveraging Tuxedo (SALT) 12cR1 (12.1.1.0) for HP-UX Itanium (64-bit) ??????????????? ???3????????????????·?????????????????????????????? (OS)???????Oracle Tuxedo 9.1, ????11.1.1.2.0 ????????????????Oracle Tuxedo System and Applications Monitor Plus (TSAM Plus) 12c?????? ???Oracle Service Architecture Leveraging Tuxedo (SALT) 12c???HP-UX Itanium????????????? 2. Data Integration?? Oracle Data Integrator 12c (12.1.2.0.0) Oracle Enterprise Data Quality 9.0.8 ??????????????? Oracle Data Integrator 12c????????????????? ????????????????·???????????????????????????·???????????????????????????? ???????????? Oracle GoldenGate???????????????E-LT (Extract, Load, Transform) ???????·?????????????·???????????????????????????????? ???·??????????·?????????????????????????????????????????·????????????????????????? Oracle Warehouse Builder???????????????????????????????Oracle Data Integrator?????????????????? Oracle Enterprise Manager Cloud Control 12c?????????????????IT??????? ????????????????????????????????????????????????·????????? ???(??)????·???????Oracle Data Integrator 12c????Oracle GoldenGate 12c??????????????????? ????????Oracle Data Integrator??????(??)?????·???????????????????????????? ?????

  Read the article

• Ubuntu 12.04 OpenCL with Intel and Radeon?

  - by Steve

  I want to setup my Ubuntu 12.04 with OpenCL(Open Computing Language) support for i7 2600k and Radeon HD5870. My Monitor is connected to the integrated Graphics of the i7. Intel OpenCL SDK is installed and working. Iteration of avaliable OpenCL devices shows 2 entries for Intel. As recommended I installed AMD APP SDK 2.6 first and then the fglrx driver. I installed fglrx from Ubuntu repositories. This works fine till here. When I run aticonfig --inital -f and restart the system I get into trouble. Xorg starts only in low-graphics mode. cat /var/log/Xorg.0.log [ 21.201] X.Org X Server 1.12.2 Release Date: 2012-05-29 [ 21.201] X Protocol Version 11, Revision 0 [ 21.201] Build Operating System: Linux 2.6.24-29-xen x86_64 Ubuntu [ 21.201] Current Operating System: Linux chimera 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 x86_ [ 21.201] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=c137757b-486b-4514-9dfe-00c97662 [ 21.201] Build Date: 05 June 2012 08:35:55AM [ 21.201] xorg-server 2:1.12.2+git20120605+server-1.12-branch.aaf48906-0ubuntu0ricotz~precise (For technical suppor [ 21.201] Current version of pixman: 0.26.0 [ 21.201] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 21.201] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 21.201] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 8 14:22:36 2012 [ 21.247] (==) Using config file: "/etc/X11/xorg.conf" [ 21.247] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 21.450] (==) ServerLayout "aticonfig Layout" [ 21.450] (**) |-->Screen "aticonfig-Screen[0]-0" (0) [ 21.450] (**) | |-->Monitor "aticonfig-Monitor[0]-0" [ 21.451] (**) | |-->Device "aticonfig-Device[0]-0" [ 21.451] (==) Automatically adding devices [ 21.451] (==) Automatically enabling devices [ 21.466] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.466] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 21.466] Entry deleted from font path. [ 21.473] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 21.473] Entry deleted from font path. [ 21.473] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 21.473] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib [ 21.473] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 21.473] (II) Loader magic: 0x7f0ad3b9ab00 [ 21.473] (II) Module ABI versions: [ 21.473] X.Org ANSI C Emulation: 0.4 [ 21.473] X.Org Video Driver: 12.0 [ 21.473] X.Org XInput driver : 16.0 [ 21.473] X.Org Server Extension : 6.0 [ 21.473] (--) PCI:*(0:0:2:0) 8086:0122:1458:d000 rev 9, Mem @ 0xfb800000/4194304, 0xe0000000/268435456, I/O @ 0x00 [ 21.473] (--) PCI: (0:1:0:0) 1002:6898:1787:2289 rev 0, Mem @ 0xd0000000/268435456, 0xfbdc0000/131072, I/O @ 0x000 [ 21.473] (II) Open ACPI successful (/var/run/acpid.socket) [ 21.473] (II) "extmod" will be loaded by default. [ 21.473] (II) "dbe" will be loaded by default. [ 21.473] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 21.473] (II) "record" will be loaded by default. [ 21.473] (II) "dri" will be loaded by default. [ 21.473] (II) "dri2" will be loaded by default. [ 21.473] (II) LoadModule: "glx" [ 21.732] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libgl [ 21.934] (II) Module glx: vendor="Advanced Micro Devices, Inc." [ 21.934] compiled for 6.9.0, module version = 1.0.0 [ 21.934] (II) Loading extension GLX [ 21.934] (II) LoadModule: "extmod" [ 22.028] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 22.041] (II) Module extmod: vendor="X.Org Foundation" [ 22.041] compiled for 1.12.2, module version = 1.0.0 [ 22.041] Module class: X.Org Server Extension [ 22.041] ABI class: X.Org Server Extension, version 6.0 [ 22.041] (II) Loading extension MIT-SCREEN-SAVER [ 22.041] (II) Loading extension XFree86-VidModeExtension [ 22.041] (II) Loading extension XFree86-DGA [ 22.041] (II) Loading extension DPMS [ 22.041] (II) Loading extension XVideo [ 22.041] (II) Loading extension XVideo-MotionCompensation [ 22.041] (II) Loading extension X-Resource [ 22.041] (II) LoadModule: "dbe" [ 22.041] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 22.066] (II) Module dbe: vendor="X.Org Foundation" [ 22.066] compiled for 1.12.2, module version = 1.0.0 [ 22.066] Module class: X.Org Server Extension [ 22.066] ABI class: X.Org Server Extension, version 6.0 [ 22.066] (II) Loading extension DOUBLE-BUFFER [ 22.066] (II) LoadModule: "record" [ 22.066] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 22.077] (II) Module record: vendor="X.Org Foundation" [ 22.077] compiled for 1.12.2, module version = 1.13.0 [ 22.077] Module class: X.Org Server Extension [ 22.077] ABI class: X.Org Server Extension, version 6.0 [ 22.077] (II) Loading extension RECORD [ 22.077] (II) LoadModule: "dri" [ 22.077] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 22.082] (II) Module dri: vendor="X.Org Foundation" [ 22.082] compiled for 1.12.2, module version = 1.0.0 [ 22.082] ABI class: X.Org Server Extension, version 6.0 [ 22.082] (II) Loading extension XFree86-DRI [ 22.082] (II) LoadModule: "dri2" [ 22.082] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 22.083] (II) Module dri2: vendor="X.Org Foundation" [ 22.083] compiled for 1.12.2, module version = 1.2.0 [ 22.083] ABI class: X.Org Server Extension, version 6.0 [ 22.083] (II) Loading extension DRI2 [ 22.083] (II) LoadModule: "fglrx" [ 22.083] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_dr [ 22.399] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc." [ 22.399] compiled for 1.4.99.906, module version = 8.96.4 [ 22.399] Module class: X.Org Video Driver [ 22.399] (II) Loading sub module "fglrxdrm" [ 22.399] (II) LoadModule: "fglrxdrm" [ 22.399] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdr [ 22.445] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc." [ 22.445] compiled for 1.4.99.906, module version = 8.96.4 [ 22.445] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4 [ 22.445] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7 [ 22.445] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50 [ 22.445] (++) using VT number 7 [ 22.445] (WW) Falling back to old probe method for fglrx [ 23.043] (II) Loading PCS database from /etc/ati/amdpcsdb [ 23.082] (--) Chipset Supported AMD Graphics Processor (0x6898) found [ 23.107] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found [ 23.107] (II) fglrx: intel VGA device detected, load intel driver. [ 23.107] (II) LoadModule: "intel" [ 23.211] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 23.475] (II) Module intel: vendor="X.Org Foundation" [ 23.475] compiled for 1.12.2, module version = 2.19.0 [ 23.475] Module class: X.Org Video Driver [ 23.475] ABI class: X.Org Video Driver, version 12.0 [ 23.476] ukiDynamicMajor: found major device number 249 [ 23.476] ukiDynamicMajor: found major device number 249 [ 23.476] ukiOpenByBusid: Searching for BusID PCI:1:0:0 [ 23.476] ukiOpenDevice: node name is /dev/ati/card0 [ 23.476] ukiOpenDevice: open result is 8, (OK) [ 23.476] ukiOpenByBusid: ukiOpenMinor returns 8 [ 23.476] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0 [ 23.540] (WW) PowerXpress feature is not supported [ 23.540] (EE) No devices detected. [ 23.540] (==) Matched intel as autoconfigured driver 0 [ 23.540] (==) Matched vesa as autoconfigured driver 1 [ 23.540] (==) Matched fbdev as autoconfigured driver 2 [ 23.540] (==) Assigned the driver to the xf86ConfigLayout [ 23.540] (II) LoadModule: "intel" [ 23.540] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 23.540] (II) Module intel: vendor="X.Org Foundation" [ 23.540] compiled for 1.12.2, module version = 2.19.0 [ 23.540] Module class: X.Org Video Driver [ 23.540] ABI class: X.Org Video Driver, version 12.0 [ 23.540] (II) UnloadModule: "intel" [ 23.540] (II) Unloading intel [ 23.540] (II) Failed to load module "intel" (already loaded, 32522) [ 23.540] (II) LoadModule: "vesa" [ 23.583] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 23.620] (II) Module vesa: vendor="X.Org Foundation" [ 23.620] compiled for 1.12.2, module version = 2.3.1 [ 23.620] Module class: X.Org Video Driver [ 23.620] ABI class: X.Org Video Driver, version 12.0 [ 23.620] (II) LoadModule: "fbdev" [ 23.620] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 23.661] (II) Module fbdev: vendor="X.Org Foundation" [ 23.661] compiled for 1.12.2, module version = 0.4.2 [ 23.661] Module class: X.Org Video Driver [ 23.661] ABI class: X.Org Video Driver, version 12.0 [ 23.661] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4 [ 23.661] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7 [ 23.661] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50 [ 23.661] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2) [ 23.661] (II) VESA: driver for VESA chipsets: vesa [ 23.661] (II) FBDEV: driver for framebuffer: fbdev [ 23.661] (++) using VT number 7 [ 23.661] (WW) xf86OpenConsole: setpgid failed: Operation not permitted [ 23.661] (WW) xf86OpenConsole: setsid failed: Operation not permitted [ 23.661] (WW) Falling back to old probe method for fglrx [ 23.661] (II) Loading PCS database from /etc/ati/amdpcsdb [ 23.661] (WW) Falling back to old probe method for vesa [ 23.661] (WW) Falling back to old probe method for fbdev [ 23.661] (EE) No devices detected. [ 23.661] Fatal server error: [ 23.661] no screens found [ 23.661] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 23.661] Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 23.661] xorg.conf: cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Is there a way to get the Radeon to work in a hybrid configuration or to use the Radeon as an OpenCL only device?

  Read the article

• Need to re-build an application - how?

  - by Tom

  For our main system, we have a small monitor application that sits outside our network and periodically tries to log in to verify the system still works. We have a problem with the monitor though in that the communications component set (Asta 3 inside Delphi applications) doesn't always connect through. Overall, I'd say it's about 95% reliable, but that other 5% kills the monitor since it will try to log in and hang on the connection attempt (no timeout in the component). This really isn't an issue on the client side of the system since the clients don't disconnect and reconnect repeatedly on the same application instance, but I need a way to make sure the monitor stays up and continues working even when the component fails on a run. I have a few ideas as to which way to have the program run, the main idea being to put the communications inside a threaded data module so that if one thread crashes then another thread can test later and the program keep going. Does this sound like a valid way to go? Any other ideas how to ensure a reliable monitoring application with a less than 100% reliable component? Thanks. P.S. Not sure these tags are the most appropriate. Tried including "system-reliability" as one, but not high enough rep to create.

  Read the article

• Dual monitors with one above the other?

  - by Felix

  I'm using Gnome 3 and proprietary Nvidia drivers. I have tried to set in nvidia-settings my external monitor to be "above" my main one (it's a laptop). However, when I try to drag a window up from the main display to the external one, it gets stuck and can't move past a certain point. Trying to maximize it changes its decoration so it looks maximized (i.e. no borders, etc), but its size or position doesn't change. Now, if I set my external monitor to be "to the left" of the main one, it works, which is why I'm suspecting this is a Gnome issue, not an Nvidia one. Anyone know how to fix this? Update: some versions: Gnome: 3.2.2.1 Nvidia: 280.13 Update 2: I can see that Gnome 3.4 is out, and among the release notes is better external monitor support. However, they only mention a small fix that is unrelated to my problem. Can anyone with Gnome 3.4 and access to an external monitor please test this out and tell me if it works? I don't want to go through the hassle of upgrading my Ubuntu installation unless I know for certain it's going to fix the problem.

  Read the article

• Resolution changes when using switch

  - by Edward D

  So, the "real" resolution of my monitor is 1024x768. That's what I'd use on my docked Windows laptop, and what I'd use on my Xubuntu desktop connected directly. When I connect a switch, to switch between the two, however, the ubuntu machine's resolution changes. Everything's still proportional, and it still thinks it's doing 1024x768, but the icons and fonts appear larger. Not 800x600 larger, but still big. When I used Xubuntu Precise, I created an xorg.conf file to set a resolution of 1280x1024 which made it look the way it does without the switch ... as a workaround. When I upgraded to Trusty, I lost this. I tried to re-create it, but doesn't seem to load my file. Ideally, I'd like to correct the original problem, but I'd settle for being able to up the resolution. I searched for a while, and tried to do it, but I'm giving up ... please help me out. Controller: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04) Monitor: NEC MultiSync LCD 1850e http://www.necdisplay.com/documents/UserManuals/LCD1850E_manual.pdf OS: Xubuntu 14.04 Trusty /etc/X11/xorg.conf: # YOU CREATED THIS FILE # sudo leafpad /etc/X11/xorg.conf Section "Device" Identifier "Configured Video Device" EndSection Section "Monitor" Identifier "NEC LCD1850E" # I found Synchronization Range at: # http://www.necdisplay.com/documents/UserManuals/LCD1850E_manual.pdf HorizSync 31.0-82.0 VertRefresh 55.0-85.0 EndSection Section "Screen" Identifier "Default Screen" Monitor "NEC LCD1850E" Device "Configured Video Device" SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1024x768" "800x600" "848x480" "640x480" EndSubSection EndSection

  Read the article

• nvidia: switching dvi socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Switching DVI socket

  - by lurscher

  I have Ubuntu 10.10 x86_64 with Nvidia 9800 gt and Nvidia driver version 270.41.06 My video card has two DVI sockets, but I only use the single monitor configuration. Now, I think the main DVI socket might be busted, so I want to try to enable the other as the main one, however, I don't know how to achieve that. I tried just plugging the monitor in that socket but it won't auto-detect it (it would have been way too easy to just work). This is my xorg.conf: Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor0" VendorName "Unknown" ModelName "AOC" HorizSync 31.5 - 84.7 VertRefresh 60.0 - 78.0 ModeLine "1080p" 172.8 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GT" EndSection Section "Screen" # Removed Option "metamodes" "1024x768 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "CustomEDID" "CRT-0:/home/charlesq/lg.bin" Option "TVStandard" "HD1080p" Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "1080p +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• how to setup duel monitors an xorg.conf

  - by MrMonty

  # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" # Removed Option "Xinerama" "1" # Removed Option "Xinerama" "0" # Removed Option "Xinerama" "1" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-1: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" # Removed Option "TwinView" "1" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0" # Removed Option "TwinView" "0" # Removed Option "metamodes" "DFP-0: 1280x1024 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1280x1024 +0+0, DFP-1: 1280x1024 +1280+0; DFP-1: 1280x1024_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection thats my file!

  Read the article

• Twinview broken on upgrade to ubuntu 10.10

  - by mapkyca

  I have been on 9.10 for over a year on the grounds that if it ain't broke, don't fix it. However, I had a spare weekend and figured it was probably about time... I performed an upgrade to 10.4, and everything seemed to proceed smoothly, so I took the plunge and went for 10.10. Disaster. My twinview Nvidia display which had been working perfectly is now broken. On boot everything seems fine, but when X starts and the second monitor springs into life the primary winks out and switches off - almost as if its been put into an unsupported display mode. The system seems to think there's a second monitor - the nvidia logo is split across the two screens, but it can't seem to start. Things I've tried: Swapping the monitors (one is older than the other, and its definitely the port not the actual monitor) Rolling back to an old Xorg conf from prior to the upgrade Installing a non-beta driver direct from Nvidia (this seems to start both monitors but then apparently stops boot and causes the second display to 'wink'. Twinview seems non-functional, both displays are mirrors) Disabling EDID Disabling twinview, logging in and attempting to use the Nvidia config to re-detect the monitors (second monitor is falsely detected and won't go higher than 1024x768. Selecting 'apply' causes one screen to go blank and the other to display garbage) googling for about 5 hours looking for similar problems, none of the offered solutions seemed to work I'm at a loss, and it is looking very much like I'm going to have to go through a time consuming reinstall to downgrade back to the working 10.4. Any thoughts?

  Read the article

• How should VertexBuffers be used with Multiple Monitors in DirectX 9

  - by Joshua C

  I am currently using DirectX 9 on a machine with two GPUs and three monitors. I am currently trying to draw a triangle on each monitor using vertexbuffers; A directx helloworld with multiple monitors if you will. I am familiar with some DirectX coding, but new to multiple monitor DirectX coding. I may be going about this the wrong way, so please do correct me if I'm doing something wrong. I have created a Direct3D Device for each enumerated adapter sharing the same Form handle. This allows me to successfully use all three monitors in full-screen mode. For Each Adapter In Direct3D.Adapters Dim PresentParameters As New PresentParameters 'Setup PresentParameters PresentParameters.Windowed = False PresentParameters.DeviceWindowHandle = MainForm.Handle Dim Device as New Device(Direct3D, Adapter.Adapter, DeviceType.Hardware, PresentParameters.DeviceWindowHandle, CreateFlags.HardwareVertexProcessing, PresentParameters) Device.SetRenderState(RenderState.Lighting, False) Devices.Add(Device) Next I can also draw text to each device successfully using a different Font for each Device. When I render a triangle using a different VertexBuffer for each Device, only two monitors display the triangle. One of the two monitors on the same GPU, and the monitor on it's own GPU display properly. VertexBuffer = New VertexBuffer(Device, 4 * Marshal.SizeOf(GetType(ColoredVertex)), Usage.WriteOnly, VertexFormat.None, Pool.Managed) Dim Verts = VertexBuffer.Lock(0, 0, LockFlags.None) Verts.WriteRange({ New ColoredVertex(-.5, -.5, 1, ForeColor), New ColoredVertex(0, .5, 1, ForeColor), New ColoredVertex(.5, -.5, 1, ForeColor) }) VertexBuffer.Unlock() VertexDeclaration = New VertexDeclaration(Device, { New VertexElement(0, 0, DeclarationType.Float3, DeclarationMethod.Default, DeclarationUsage.Position, 0), New VertexElement(0, 12, DeclarationType.Color, DeclarationMethod.Default, DeclarationUsage.Color, 0), VertexElement.VertexDeclarationEnd }) Render Code: Device.SetStreamSource(0, VertexBuffer, 0, Marshal.SizeOf(GetType(ColoredVertex))) Device.VertexDeclaration = VertexDeclaration Device.DrawPrimitives(PrimitiveType.TriangleList, 0, 1) I have to assume the fact that they share the same physical card comes into play. Should I use multiple buffers on the same card, and if so, how? Or what is the way I should access the VertexBuffer across Devices? Another thought I had was the non working monitor acts like there are no lights. Is turning off lighting on each device on the same card causing issues somehow?

  Read the article

• Precise exposition of an image for set number of frames (Vsync?)

  - by Istrebitel

  I need to make a simple enough program in C#, but it seems to be impossible via usual WinForms means. I need to show something (a string of text, an image) on the screen for very small time interval. Since typical monitors are 60Hz, this interval would be 1 or 2 frames (16,6 or 33,3 ms). I tried doing this with usual WinForms, and it is not possible because, apparently, there is no way to know how many frames were output to the monitor since some point in time. I can only draw on the controls, and monitor output is totally independant. So even if I run the timer, say, for 17 ms, between showing and hiding the image, it still sometimes manages not to draw a single frame of my image on the screen (even though theoretically it should, because 17ms 16,6ms). Moreover, even 20ms seems to slow (even though i should be more than enough). I did some game development as a hobby in the past (Delphi X, XNA) and I know that you usually draw the whole screen by yourself, each frame. Also, I know that there is an option called Vsync in most modern games, that allows you to synchronize your framerate to your monitor's frame rate. So, is it possible? I mean, to actually know how many frames were sent to the monitor with w/e I want to show?

  Read the article

• Has this server been compromised?

  - by Griffo

  A friend is running a VPS (CentOS) His business partner was the sysadmin but has left him high and dry to look after the system. So, I've been asked to help out in fixing an apparent spam problem. His IP address got blacklisted for unsolicited mail. I'm not sure where to look for a problem, but I started with netstat to see what open connections were running. It looks to me like he has remote hosts connected to his SMTP server. Here's the output: Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 78.153.208.195:imap 86-40-60-183-dynamic.:10029 ESTABLISHED tcp 0 0 78.153.208.195:imap 86-40-60-183-dynamic.:10010 ESTABLISHED tcp 0 1 78.153.208.195:35563 news.avanport.pt:smtp SYN_SENT tcp 0 0 78.153.208.195:35559 vip-us-br-mx.terra.com:smtp TIME_WAIT tcp 0 0 78.153.208.195:35560 vip-us-br-mx.terra.com:smtp TIME_WAIT tcp 1 1 78.153.208.195:imaps 86-40-60-183-dynamic.:11647 CLOSING tcp 1 1 78.153.208.195:imaps 86-40-60-183-dynamic.:11645 CLOSING tcp 0 0 78.153.208.195:35562 mx.a.locaweb.com.br:smtp TIME_WAIT tcp 0 0 78.153.208.195:35561 mx.a.locaweb.com.br:smtp TIME_WAIT tcp 0 0 78.153.208.195:imap 86-41-8-64-dynamic.b-:49446 ESTABLISHED Does this indicate that his server may be acting as an open relay? Mail should only be outgoing from localhost. Apologies for my lack of knowledge but I don't work on linux in my day job. EDIT: Here's some output from /var/log/maillog which looks like it may be the result of spam. If it appears to be the case to others, where should I look next to investigate a root cause? I put the server IP through www.checkor.com and it came back clean. Jun 29 00:02:13 vps-1001108-595 qmail: 1309302133.721674 status: local 0/10 remote 9/20 Jun 29 00:02:13 vps-1001108-595 qmail: 1309302133.886182 delivery 74116: deferral: 200.147.36.15_does_not_like_recipient./Remote_host_said:_450_4.7.1_Client_host_rejected:_cannot_find_your_hostname,_[78.153.208.195]/Giving_up_on_200.147.36.15./ Jun 29 00:02:13 vps-1001108-595 qmail: 1309302133.886255 status: local 0/10 remote 8/20 Jun 29 00:02:13 vps-1001108-595 qmail: 1309302133.898266 delivery 74115: deferral: 187.31.0.11_does_not_like_recipient./Remote_host_said:_450_4.7.1_Client_host_rejected:_cannot_find_your_hostname,_[78.153.208.195]/Giving_up_on_187.31.0.11./ Jun 29 00:02:13 vps-1001108-595 qmail: 1309302133.898327 status: local 0/10 remote 7/20 Jun 29 00:02:14 vps-1001108-595 qmail: 1309302134.137833 delivery 74111: deferral: Sorry,_I_wasn't_able_to_establish_an_SMTP_connection._(#4.4.1)/ Jun 29 00:02:14 vps-1001108-595 qmail: 1309302134.137914 status: local 0/10 remote 6/20 Jun 29 00:02:19 vps-1001108-595 qmail: 1309302139.903536 delivery 74000: failure: 209.85.143.27_failed_after_I_sent_the_message./Remote_host_said:_550-5.7.1_[78.153.208.195_______1]_Our_system_has_detected_an_unusual_rate_of/550-5.7.1_unsolicited_mail_originating_from_your_IP_address._To_protect_our/550-5.7.1_users_from_spam,_mail_sent_from_your_IP_address_has_been_blocked./550-5.7.1_Please_visit_http://www.google.com/mail/help/bulk_mail.html_to_review/550_5.7.1_our_Bulk_Email_Senders_Guidelines._e25si1385223wes.137/ Jun 29 00:02:19 vps-1001108-595 qmail: 1309302139.903606 status: local 0/10 remote 5/20 Jun 29 00:02:19 vps-1001108-595 qmail-queue-handlers[15501]: Handlers Filter before-queue for qmail started ... EDIT #2 Here's the output of netstat -p with the imap and imaps lines removed. I also removed my own ssh session Active Internet connections (w/o servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 1 78.153.208.195:40076 any-in-2015.1e100.net:smtp SYN_SENT 24096/qmail-remote. tcp 0 1 78.153.208.195:40077 any-in-2015.1e100.net:smtp SYN_SENT 24097/qmail-remote. udp 0 0 78.153.208.195:48515 125.64.11.158:4225 ESTABLISHED 20435/httpd

  Read the article

• Troubleshooting Windows Authentication problems (no challenge) in IIS 7.5?

  - by Aaronaught

  I know that there are thousands of reports of people having trouble getting Integrated Windows Authentication to work with IIS, but they all seem to lead to web pages that don't apply or solutions that I've already tried. I've deployed dozens of sites like this before, so either there's something bizarre going on with the server/configuration, or I've been looking at this too long and not seeing the obvious. Simply put, everything works perfectly on my local machine, but falls apart on the production server, which as far as I can tell has the exact same configuration. On the local machine: The machine is running Windows 7 Ultimate, Service Pack 1, IIS 7.5. The site has been tested successfully, using both IIS and the VS Web Development Server. The IIS site config has all authentication methods disabled except Windows Authentication. The local machine is not on any domain. The Providers set up are Negotiate and NTLM (not Negotiate:Kerberos). Extended Protection is Off. All browsers tested (IE, Firefox, Chrome) show the challenge prompt and allow me to log in to the localhost domain with my (local) Windows account. All browsers tested also work using an opaque local IP address - so the browsers themselves don't seem to care whether the site appears "local" or "remote". I've added a display line to the web page which shows the currently-logged-in user and it shows exactly what I would expect (whichever local user I logged in with). On the remote machine: The server is running Windows Server 2008 R2, IIS 7.5. Loading the web page results in an immediate 401.2 error: You are not authorized to view this page due to invalid authentication headers. No challenge prompt ever appears. The IIS site config has all authentication methods disabled except Windows Authentication. The remote machine is not on any domain. The Providers set up are Negotiate and NTLM (not Negotiate:Kerberos). Extended Protection is Off. On the remote machine (remote desktop session), the same error appears in Internet Explorer regardless of whether the domain is localhost or the external IP address. If I try to view the remote web site from my local machine, the error is still 401, but a slightly different 401. No subcode, with the text: Access is denied due to invalid credentials. The Windows Authentication IIS role feature is installed. The WindowsAuthentication Module is added (at the Server level). The exact same error occurs if I turn off Windows Authentication and enable Basic Authentication. The site does load if I turn off Windows Authentication and enable Anonymous (obviously). I've already followed all of the troubleshooting steps on Microsoft Support: Troubleshooting HTTP 401 errors in IIS I've already tried the workaround shown on another Microsoft support page (supposedly to force NTLM as the only method). Last but not least, I tried turning on FREB for 401.2 errors and the results don't seem to tell me anything useful, all I see is the following warning: MODULE_SET_RESPONSE_ERROR_STATUS ModuleName IIS Web Core Notification 2 HttpStatus 401 HttpReason Unauthorized HttpSubStatus 2 ErrorCode 2147942405 ConfigExceptionInfo Notification AUTHENTICATE_REQUEST ErrorCode Access is denied. (0x80070005) ...this seems to just be telling me what I already know (that it's simply rejecting the request instead of negotiating the credentials). The trace does indicate that the WindowsAuthentication module is correctly loaded because there is a NOTIFY_MODULE_START line with ModuleName = WindowsAuthentication (and various other ASP.NET follow-up events - [un]fortunately, no interesting errors or warnings here). Can anyone tell me what I might be missing here? Quick Update: I'm a little uncomfortable sending a whole Wireshark dump as it would reveal IPs, URLs and other stuff, but I did a side-by-side comparison of the HTTP responses from localhost and the remote server in Fiddler, and it seems fairly self-evident what the problem is: Localhost: HTTP/1.1 401 Unauthorized Cache-Control: private Content-Type: text/html; charset=utf-8 Server: Microsoft-IIS/7.5 WWW-Authenticate: Negotiate WWW-Authenticate: NTLM X-Powered-By: ASP.NET Date: Sat, 17 Dec 2011 23:42:34 GMT Content-Length: 6399 Proxy-Support: Session-Based-Authentication Remote: HTTP/1.1 401 Unauthorized Content-Type: text/html Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET Date: Sat, 17 Dec 2011 23:43:13 GMT Content-Length: 1293 Aside from a few seemingly-inconsequential differences like cache-control, the main difference is that the remote server is not sending the WWW-Authenticate headers back to the client. So, I guess that narrows the question down to: Why is IIS not sending WWW-Authenticate headers when Windows Authentication appears to be installed, loaded, and exclusively enabled?

  Read the article

• undefined reference to function, despite giving reference in c

  - by Jamie Edwards

  I'm following a tutorial, but when it comes to compiling and linking the code I get the following error: /tmp/cc8gRrVZ.o: In function `main': main.c:(.text+0xa): undefined reference to `monitor_clear' main.c:(.text+0x16): undefined reference to `monitor_write' collect2: ld returned 1 exit status make: *** [obj/main.o] Error 1 What that is telling me is that I haven't defined both 'monitor_clear' and 'monitor_write'. But I have, in both the header and source files. They are as follows: monitor.c: // monitor.c -- Defines functions for writing to the monitor. // heavily based on Bran's kernel development tutorials, // but rewritten for JamesM's kernel tutorials. #include "monitor.h" // The VGA framebuffer starts at 0xB8000. u16int *video_memory = (u16int *)0xB8000; // Stores the cursor position. u8int cursor_x = 0; u8int cursor_y = 0; // Updates the hardware cursor. static void move_cursor() { // The screen is 80 characters wide... u16int cursorLocation = cursor_y * 80 + cursor_x; outb(0x3D4, 14); // Tell the VGA board we are setting the high cursor byte. outb(0x3D5, cursorLocation >> 8); // Send the high cursor byte. outb(0x3D4, 15); // Tell the VGA board we are setting the low cursor byte. outb(0x3D5, cursorLocation); // Send the low cursor byte. } // Scrolls the text on the screen up by one line. static void scroll() { // Get a space character with the default colour attributes. u8int attributeByte = (0 /*black*/ << 4) | (15 /*white*/ & 0x0F); u16int blank = 0x20 /* space */ | (attributeByte << 8); // Row 25 is the end, this means we need to scroll up if(cursor_y >= 25) { // Move the current text chunk that makes up the screen // back in the buffer by a line int i; for (i = 0*80; i < 24*80; i++) { video_memory[i] = video_memory[i+80]; } // The last line should now be blank. Do this by writing // 80 spaces to it. for (i = 24*80; i < 25*80; i++) { video_memory[i] = blank; } // The cursor should now be on the last line. cursor_y = 24; } } // Writes a single character out to the screen. void monitor_put(char c) { // The background colour is black (0), the foreground is white (15). u8int backColour = 0; u8int foreColour = 15; // The attribute byte is made up of two nibbles - the lower being the // foreground colour, and the upper the background colour. u8int attributeByte = (backColour << 4) | (foreColour & 0x0F); // The attribute byte is the top 8 bits of the word we have to send to the // VGA board. u16int attribute = attributeByte << 8; u16int *location; // Handle a backspace, by moving the cursor back one space if (c == 0x08 && cursor_x) { cursor_x--; } // Handle a tab by increasing the cursor's X, but only to a point // where it is divisible by 8. else if (c == 0x09) { cursor_x = (cursor_x+8) & ~(8-1); } // Handle carriage return else if (c == '\r') { cursor_x = 0; } // Handle newline by moving cursor back to left and increasing the row else if (c == '\n') { cursor_x = 0; cursor_y++; } // Handle any other printable character. else if(c >= ' ') { location = video_memory + (cursor_y*80 + cursor_x); *location = c | attribute; cursor_x++; } // Check if we need to insert a new line because we have reached the end // of the screen. if (cursor_x >= 80) { cursor_x = 0; cursor_y ++; } // Scroll the screen if needed. scroll(); // Move the hardware cursor. move_cursor(); } // Clears the screen, by copying lots of spaces to the framebuffer. void monitor_clear() { // Make an attribute byte for the default colours u8int attributeByte = (0 /*black*/ << 4) | (15 /*white*/ & 0x0F); u16int blank = 0x20 /* space */ | (attributeByte << 8); int i; for (i = 0; i < 80*25; i++) { video_memory[i] = blank; } // Move the hardware cursor back to the start. cursor_x = 0; cursor_y = 0; move_cursor(); } // Outputs a null-terminated ASCII string to the monitor. void monitor_write(char *c) { int i = 0; while (c[i]) { monitor_put(c[i++]); } } void monitor_write_hex(u32int n) { s32int tmp; monitor_write("0x"); char noZeroes = 1; int i; for (i = 28; i > 0; i -= 4) { tmp = (n >> i) & 0xF; if (tmp == 0 && noZeroes != 0) { continue; } if (tmp >= 0xA) { noZeroes = 0; monitor_put (tmp-0xA+'a' ); } else { noZeroes = 0; monitor_put( tmp+'0' ); } } tmp = n & 0xF; if (tmp >= 0xA) { monitor_put (tmp-0xA+'a'); } else { monitor_put (tmp+'0'); } } void monitor_write_dec(u32int n) { if (n == 0) { monitor_put('0'); return; } s32int acc = n; char c[32]; int i = 0; while (acc > 0) { c[i] = '0' + acc%10; acc /= 10; i++; } c[i] = 0; char c2[32]; c2[i--] = 0; int j = 0; while(i >= 0) { c2[i--] = c[j++]; } monitor_write(c2); } monitor.h: // monitor.h -- Defines the interface for monitor.h // From JamesM's kernel development tutorials. #ifndef MONITOR_H #define MONITOR_H #include "common.h" // Write a single character out to the screen. void monitor_put(char c); // Clear the screen to all black. void monitor_clear(); // Output a null-terminated ASCII string to the monitor. void monitor_write(char *c); #endif // MONITOR_H common.c: // common.c -- Defines some global functions. // From JamesM's kernel development tutorials. #include "common.h" // Write a byte out to the specified port. void outb ( u16int port, u8int value ) { asm volatile ( "outb %1, %0" : : "dN" ( port ), "a" ( value ) ); } u8int inb ( u16int port ) { u8int ret; asm volatile ( "inb %1, %0" : "=a" ( ret ) : "dN" ( port ) ); return ret; } u16int inw ( u16int port ) { u16int ret; asm volatile ( "inw %1, %0" : "=a" ( ret ) : "dN" ( port ) ); return ret; } // Copy len bytes from src to dest. void memcpy(u8int *dest, const u8int *src, u32int len) { const u8int *sp = ( const u8int * ) src; u8int *dp = ( u8int * ) dest; for ( ; len != 0; len-- ) *dp++ =*sp++; } // Write len copies of val into dest. void memset(u8int *dest, u8int val, u32int len) { u8int *temp = ( u8int * ) dest; for ( ; len != 0; len-- ) *temp++ = val; } // Compare two strings. Should return -1 if // str1 < str2, 0 if they are equal or 1 otherwise. int strcmp(char *str1, char *str2) { int i = 0; int failed = 0; while ( str1[i] != '\0' && str2[i] != '\0' ) { if ( str1[i] != str2[i] ) { failed = 1; break; } i++; } // Why did the loop exit? if ( ( str1[i] == '\0' && str2[i] != '\0' || (str1[i] != '\0' && str2[i] =='\0' ) ) failed =1; return failed; } // Copy the NULL-terminated string src into dest, and // return dest. char *strcpy(char *dest, const char *src) { do { *dest++ = *src++; } while ( *src != 0 ); } // Concatenate the NULL-terminated string src onto // the end of dest, and return dest. char *strcat(char *dest, const char *src) { while ( *dest != 0 ) { *dest = *dest++; } do { *dest++ = *src++; } while ( *src != 0 ); return dest; } common.h: // common.h -- Defines typedefs and some global functions. // From JamesM's kernel development tutorials. #ifndef COMMON_H #define COMMON_H // Some nice typedefs, to standardise sizes across platforms. // These typedefs are written for 32-bit x86. typedef unsigned int u32int; typedef int s32int; typedef unsigned short u16int; typedef short s16int; typedef unsigned char u8int; typedef char s8int; void outb ( u16int port, u8int value ); u8int inb ( u16int port ); u16int inw ( u16int port ); #endif //COMMON_H main.c: // main.c -- Defines the C-code kernel entry point, calls initialisation routines. // Made for JamesM's tutorials <www.jamesmolloy.co.uk> #include "monitor.h" int main(struct multiboot *mboot_ptr) { monitor_clear(); monitor_write ( "hello, world!" ); return 0; } here is my makefile: C_SOURCES= main.c monitor.c common.c S_SOURCES= boot.s C_OBJECTS=$(patsubst %.c, obj/%.o, $(C_SOURCES)) S_OBJECTS=$(patsubst %.s, obj/%.o, $(S_SOURCES)) CFLAGS=-nostdlib -nostdinc -fno-builtin -fno-stack-protector -m32 -Iheaders LDFLAGS=-Tlink.ld -melf_i386 --oformat=elf32-i386 ASFLAGS=-felf all: kern/kernel .PHONY: clean clean: -rm -f kern/kernel kern/kernel: $(S_OBJECTS) $(C_OBJECTS) ld $(LDFLAGS) -o $@ $^ $(C_OBJECTS): obj/%.o : %.c gcc $(CFLAGS) $< -o $@ vpath %.c source $(S_OBJECTS): obj/%.o : %.s nasm $(ASFLAGS) $< -o $@ vpath %.s asem Hopefully this will help you understand what is going wrong and how to fix it :L Thanks in advance. Jamie.

  Read the article

• MapRedux - PowerShell and Big Data

  - by Dittenhafer Solutions

  MapRedux – #PowerShell and #Big Data Have you been hearing about “big data”, “map reduce” and other large scale computing terms over the past couple of years and been curious to dig into more detail? Have you read some of the Apache Hadoop online documentation and unfortunately concluded that it wasn't feasible to setup a “test” hadoop environment on your machine? More recently, I have read about some of Microsoft’s work to enable Hadoop on the Azure cloud. Being a "Microsoft"-leaning technologist, I am more inclinded to be successful with experimentation when on the Windows platform. Of course, it is not that I am "religious" about one set of technologies other another, but rather more experienced. Anyway, within the past couple of weeks I have been thinking about PowerShell a bit more as the 2012 PowerShell Scripting Games approach and it occured to me that PowerShell's support for Windows Remote Management (WinRM), and some other inherent features of PowerShell might lend themselves particularly well to a simple implementation of the MapReduce framework. I fired up my PowerShell ISE and started writing just to see where it would take me. Quite simply, the ScriptBlock feature combined with the ability of Invoke-Command to create remote jobs on networked servers provides much of the plumbing of a distributed computing environment. There are some limiting factors of course. Microsoft provided some default settings which prevent PowerShell from taking over a network without administrative approval first. But even with just one adjustment, a given Windows-based machine can become a node in a MapReduce-style distributed computing environment. Ok, so enough introduction. Let's talk about the code. First, any machine that will participate as a remote "node" will need WinRM enabled for remote access, as shown below. This is not exactly practical for hundreds of intended nodes, but for one (or five) machines in a test environment it does just fine. C:> winrm quickconfig WinRM is not set up to receive requests on this machine. The following changes must be made: Set the WinRM service type to auto start. Start the WinRM service. Make these changes [y/n]? y Alternatively, you could take the approach described in the Remotely enable PSRemoting post from the TechNet forum and use PowerShell to create remote scheduled tasks that will call Enable-PSRemoting on each intended node. Invoke-MapRedux Moving on, now that you have one or more remote "nodes" enabled, you can consider the actual Map and Reduce algorithms. Consider the following snippet: $MyMrResults = Invoke-MapRedux -MapReduceItem $Mr -ComputerName $MyNodes -DataSet $dataset -Verbose Invoke-MapRedux takes an instance of a MapReduceItem which references the Map and Reduce scriptblocks, an array of computer names which are the remote nodes, and the initial data set to be processed. As simple as that, you can start working with concepts of big data and the MapReduce paradigm. Now, how did we get there? I have published the initial version of my PsMapRedux PowerShell Module on GitHub. The PsMapRedux module provides the Invoke-MapRedux function described above. Feel free to browse the underlying code and even contribute to the project! In a later post, I plan to show some of the inner workings of the module, but for now let's move on to how the Map and Reduce functions are defined. Map Both the Map and Reduce functions need to follow a prescribed prototype. The prototype for a Map function in the MapRedux module is as follows. A simple scriptblock that takes one PsObject parameter and returns a hashtable. It is important to note that the PsObject $dataset parameter is a MapRedux custom object that has a "Data" property which offers an array of data to be processed by the Map function. $aMap = { Param ( [PsObject] $dataset ) # Indicate the job is running on the remote node. Write-Host ($env:computername + "::Map"); # The hashtable to return $list = @{}; # ... Perform the mapping work and prepare the $list hashtable result with your custom PSObject... # ... The $dataset has a single 'Data' property which contains an array of data rows # which is a subset of the originally submitted data set. # Return the hashtable (Key, PSObject) Write-Output $list; } Reduce Likewise, with the Reduce function a simple prototype must be followed which takes a $key and a result $dataset from the MapRedux's partitioning function (which joins the Map results by key). Again, the $dataset is a MapRedux custom object that has a "Data" property as described in the Map section. $aReduce = { Param ( [object] $key, [PSObject] $dataset ) Write-Host ($env:computername + "::Reduce - Count: " + $dataset.Data.Count) # The hashtable to return $redux = @{}; # Return Write-Output $redux; } All Together Now When everything is put together in a short example script, you implement your Map and Reduce functions, query for some starting data, build the MapReduxItem via New-MapReduxItem and call Invoke-MapRedux to get the process started: # Import the MapRedux and SQL Server providers Import-Module "MapRedux" Import-Module “sqlps” -DisableNameChecking # Query the database for a dataset Set-Location SQLSERVER:\sql\dbserver1\default\databases\myDb $query = "SELECT MyKey, Date, Value1 FROM BigData ORDER BY MyKey"; Write-Host "Query: $query" $dataset = Invoke-SqlCmd -query $query # Build the Map function $MyMap = { Param ( [PsObject] $dataset ) Write-Host ($env:computername + "::Map"); $list = @{}; foreach($row in $dataset.Data) { # Write-Host ("Key: " + $row.MyKey.ToString()); if($list.ContainsKey($row.MyKey) -eq $true) { $s = $list.Item($row.MyKey); $s.Sum += $row.Value1; $s.Count++; } else { $s = New-Object PSObject; $s | Add-Member -Type NoteProperty -Name MyKey -Value $row.MyKey; $s | Add-Member -type NoteProperty -Name Sum -Value $row.Value1; $list.Add($row.MyKey, $s); } } Write-Output $list; } $MyReduce = { Param ( [object] $key, [PSObject] $dataset ) Write-Host ($env:computername + "::Reduce - Count: " + $dataset.Data.Count) $redux = @{}; $count = 0; foreach($s in $dataset.Data) { $sum += $s.Sum; $count += 1; } # Reduce $redux.Add($s.MyKey, $sum / $count); # Return Write-Output $redux; } # Create the item data $Mr = New-MapReduxItem "My Test MapReduce Job" $MyMap $MyReduce # Array of processing nodes... $MyNodes = ("node1", "node2", "node3", "node4", "localhost") # Run the Map Reduce routine... $MyMrResults = Invoke-MapRedux -MapReduceItem $Mr -ComputerName $MyNodes -DataSet $dataset -Verbose # Show the results Set-Location C:\ $MyMrResults | Out-GridView Conclusion I hope you have seen through this article that PowerShell has a significant infrastructure available for distributed computing. While it does take some code to expose a MapReduce-style framework, much of the work is already done and PowerShell could prove to be the the easiest platform to develop and run big data jobs in your corporate data center, potentially in the Azure cloud, or certainly as an academic excerise at home or school. Follow me on Twitter to stay up to date on the continuing progress of my Powershell MapRedux module, and thanks for reading! Daniel

  Read the article

• git push >> fatal: no configured push destination

  - by Marc

  I'm still going through some guides on RoR and i'm stuck here at "Deploying the demo app" I followed instructions: " With the completion of microposts resources, now is a good time to push the repository up to GitHub: " $ git add . $ git commit -a -m "Finish demo app" $ git push What happened wrong here was the push part.. it outputted this: $ git push fatal: No configured push destination. Either specify the URL from the command-line or configure a remote repository using git remote add < name < url git push < name So i tried following the insturctions by doing this command: $git remote add demo_app 'www.github.com/levelone/demo_app' fatal: remote demo_app already exists. So i push: $git push demo_app fatal: 'www.github.com/levelone/demo_app' does not appear to be a git repository fatal: The remote end hung up unexpectedly What can i do here? Any help would be much appreciated. -Marc

  Read the article

• Compiling libcurl for mingw32 (Windows) on mac os x 10.6

  - by Daniel

  Hello. I'm compiling libcurl for mingw32 as follows: ./configure --prefix=/Users/daniel/mingw32 "CFLAGS= -ABI=32" make make install But when compiling a program using mingw32-gcc: i386-mingw32-gcc -lcurl -o bin/remote-win.exe remote.c i get: In file included from /Users/daniel/mingw32/usr/local/include/curl/curl.h:34, from remote.c:6: /Users/daniel/mingw32/usr/local/include/curl/curlbuild.h:152:26: sys/socket.h: No such file or directory In file included from /Users/daniel/mingw32/usr/local/include/curl/curl.h:34, from remote.c:6: /Users/daniel/mingw32/usr/local/include/curl/curlbuild.h:165: error: syntax error before "curl_socklen_t" In file included from /Users/daniel/mingw32/usr/local/include/curl/curl.h:35, from remote.c:6: /Users/daniel/mingw32/usr/local/include/curl/curlrules.h:143: error: size of array `__curl_rule_01__' is negative /Users/daniel/mingw32/usr/local/include/curl/curlrules.h:153: error: size of array `__curl_rule_02__' is negative I'm pretty sure the error is because curl_socklen_t does not exist on windows. I've tried --target=--mingw32 but still no success. Please help

  Read the article

• Kernel, dpkg, sudo and apt-get corrupted

  - by TECH4JESUS

  Here are some errors that I am getting: 1) A proper configuration for Firestarter was not found. If you are running Firestarter from the directory you built it in, run make install-data-local to install a configuration, or simply make install to install the whole program. Firestarter will now close. root@p:/# firestarter ** (firestarter:5890): WARNING **: The connection is closed (firestarter:5890): GnomeUI-WARNING **: While connecting to session manager: None of the authentication protocols specified are supported. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. ^C 2) Also I cannot apt-get install sudo root@p:/# apt-get install sudo Reading package lists... Done Building dependency tree Reading state information... Done sudo is already the newest version. The following packages were automatically installed and are no longer required: gir1.2-rb-3.0 gir1.2-gstreamer-0.10 libntfs10 python-mako libdmapsharing-3.0-2 rhythmbox-data libx264-116 rhythmbox libiso9660-7 librhythmbox-core5 libvpx0 libmatroska4 gir1.2-gst-plugins-base-0.10 rhythmbox-mozilla rhythmbox-plugin-zeitgeist libattica0 libgpac0.4.5 python-markupsafe libmusicbrainz4c2a rhythmbox-plugin-cdrecorder rhythmbox-plugins libaudiofile0 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. 9 not fully installed or removed. Need to get 0 B/76.3 MB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y /bin/sh: 1: /usr/sbin/dpkg-preconfigure: not found (Reading database ... 495741 files and directories currently installed.) Preparing to replace linux-image-3.2.0-24-generic 3.2.0-24.39 (using .../linux-image-3.2.0-24-generic_3.2.0-24.39_amd64.deb) ... dpkg (subprocess): unable to execute old pre-removal script (/var/lib/dpkg/info/linux-image-3.2.0-24-generic.prerm): No such file or directory dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg - trying script from the new package instead ... dpkg (subprocess): unable to execute new pre-removal script (/var/lib/dpkg/tmp.ci/prerm): No such file or directory dpkg: error processing /var/cache/apt/archives/linux-image-3.2.0-24-generic_3.2.0-24.39_amd64.deb (--unpack): subprocess new pre-removal script returned error exit status 2 dpkg (subprocess): unable to execute installed post-installation script (/var/lib/dpkg/info/linux-image-3.2.0-24-generic.postinst): No such file or directory dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Preparing to replace linux-image-3.2.0-25-generic 3.2.0-25.40 (using .../linux-image-3.2.0-25-generic_3.2.0-25.40_amd64.deb) ... dpkg (subprocess): unable to execute old pre-removal script (/var/lib/dpkg/info/linux-image-3.2.0-25-generic.prerm): No such file or directory dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg - trying script from the new package instead ... dpkg (subprocess): unable to execute new pre-removal script (/var/lib/dpkg/tmp.ci/prerm): No such file or directory dpkg: error processing /var/cache/apt/archives/linux-image-3.2.0-25-generic_3.2.0-25.40_amd64.deb (--unpack): subprocess new pre-removal script returned error exit status 2 dpkg (subprocess): unable to execute installed post-installation script (/var/lib/dpkg/info/linux-image-3.2.0-25-generic.postinst): No such file or directory dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.2.0-24-generic_3.2.0-24.39_amd64.deb /var/cache/apt/archives/linux-image-3.2.0-25-generic_3.2.0-25.40_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

< Previous Page | 180 181 182 183 184 185 186 187 188 189 190 191  | Next Page >