Search Results

Search found 8647 results on 346 pages for 'intel cpu'.

Page 185/346 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

  • How to stop fan running always on Asus P8P67LE motherboard with ATI Radeon HD6900

    - by Chris Good
    I'm using Ubuntu 12.04 LTS. I'm not sure if it is the CPU (i7) fan or the video card fan. I've tried using lm-sensors & fancontrol sudo sensors-detect Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `w83627ehf': * ISA bus, address 0x290 Chip `Nuvoton NCT6776F Super IO Sensors' (confidence: 9) Driver `coretemp': * Chip `Intel digital thermal sensor' (confidence: 9) To load everything that is needed, add this to /etc/modules: # Chip drivers coretemp w83627ehf Like many people, I'm also getting error: /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed Here is the output of sensors: # sensors radeon-pci-0100 Adapter: PCI adapter temp1: +71.0°C coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 0: +44.0°C (high = +80.0°C, crit = +98.0°C) Core 1: +40.0°C (high = +80.0°C, crit = +98.0°C) Core 2: +43.0°C (high = +80.0°C, crit = +98.0°C) Core 3: +42.0°C (high = +80.0°C, crit = +98.0°C) I'm hoping some-one has already solved this for my configuration because this seems to be a problem for many people and there are many different suggestions.

    Read the article

  • I need acpi=off to boot, but this seems to disable wifi

    - by TheExp3rt
    To boot my computer, I have to use acpi=off in kernel options. Doing this apparently causes my wifi adapter to be switched off and prevents my mouse and USB keyboard to not work. If I change acpi=off to nomodeset, it fixes these problems. But then it sets my computer at a lower resolution. I am currently running Kubuntu 13.10, although none of the updates, starting from 12.04, changed the need for acpi=off. I assume I need acpi=off in because I have an oldish computer with an intel motherboard How can I boot without acpi=off? Output of uname -a: 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC x86_64 x86_64 x86_64 GNU/Linux

    Read the article

  • Ubuntu 10.10 freezes

    - by albert green
    Hi, I have the following configuration: CPU: amd athlon 64bit Motherboard: Phoenix with awardBIOS v6.0 APIC mode = disabled Video card: GeForce 5500 Sound card: soundblaster live 24bit RAM: 1.5GB Partitions: ext3 32GB where I installed Ubuntu. Swap 500MB. 180GB Fat32 unmounted. contains data only. I installed Ubuntu 10.10 and used the "Additional driver" program to get the nVidia proprietary drivers. The system works for sometime and randomly freezes. The mouse and keyboard are not responding and I am not able to do a SSH. The only solution is pressing the power button. I tried Kubuntu 10.10 and 32/64-bits versions as well. There is nothing in the logs to suggest what the reason might be. Any help will be appreciated. Thanks in advance.

    Read the article

  • How long does boot repair take?

    - by Emre
    Reinstalling Ubuntu messed up my boot loader so I I tried to fix it with boot repair. It detected my OSX installation and asked about removing the "separate boot/EFI". It also said my partition was full despite the fact that it wasn't and asked me to remove stuff. I declined both and proceeded. It's been stuck at the "purge and reinstall the GRUB" stage for half an hour. Is this typical, bearing in mind I have a fast SSD and CPU? Is there a better way to re-install grub on a multi-booting UEFI system? Does my pastebin provide any insight?

    Read the article

  • Blank Screen After Ubuntu 12 installation

    - by Atul
    On my dell laptop, running with windows 7, I installed Ubuntu 12. I used it for sometime, then i re-started to switch to windows. First time it got boot up with windows but then it got hanged. I re-started again and then blank screen with blinking cursor came and beep sounds also started to came. I read in few forums and this seems like a common issue with Ubuntu. I tried using the bootable USB for both windows 7 and Ubuntu but none of these are even getting detected. Please let me know if any of know the work-around. Below is configuration" Machine: Dell Studio BIOS: Phoenix OS: Windows 7 Motherboard: Intel

    Read the article

  • Multilevel Queue Scheduling (MQS) with Round Robin

    - by stackuser
    I'm trying to use MQS to create a Gantt chart of 5 processes (P1-P5) as well as their waiting, response, and turnaround times (and averages of those metrics) within a CPU task schedule. Here's the basic table of arrival times and bursts: Here's my actual work version after ticking off the finished processes. The time quantum for each time slice is (2 queues) TQ1=4 and TQ2=3. Note that I'm doing MQS and NOT MLFQ: It just doesn't feel like I'm doing MQS right here, I know this gets a little complex but maybe someone can point out where I'm going totally wrong.

    Read the article

  • Ubuntu 12.10 "fakeRAID" RAID0 installation

    - by João André
    I have 2 80 Gb HDD's with a RAID 0 motherboard configuration (Intel Z77, fakeRAID) with a 100 Gb partition running Windows 7 and a 60 Gb partition where I would like to install Ubuntu 12.10. However, even though the installer seems to correctly detect the RAID 0 array, GRUB2 is not installed and the computer boots into Windows normally. The same thing does not happen when installing Fedora 17. The installer (Anaconda) also detects the disk array, but GRUB2 installation is successful. What exactly are the differences between Ubiquity and Anaconda? And is there a way to correctly install GRUB2 in a fakeRAID system, since there are no alternative Ubuntu CDs?

    Read the article

  • Why is my fan constatnly blowing in Ubuntu?

    - by Derfder
    I have installed Ubuntu 13.04 (64-bits) alongside Windows 7 on different partition on my second desktop. It's working nice. I have updated everything. However, I have problems with my fan. It's blowing non-stop and very fast(loud). I haven't these problems in Windows 7 where it works nicely. How to update drivers for my fan or something else? My desktop is: HP Pro 3410 Microtower PC. Graphic card: AMD Radeon HD 6570 Board: 2A9C 1.1 Bus Clock: 133 megahertz BIOS: American Megatrends Inc. 6.14 11/05/2010 Processor: 3,20 gigahertz Intel Core i3 550 DRIVERS I HAVE TRIED FOR MY GRAPHIC CARD: I have tried these drivers so far: xserver-xorg-video-ati, version: 1:7.1.0-0ubuntu2 fglrx Version: 2:9.010-0ubuntu3 fglrx-updates Version 2:9.012-0ubuntu1 But the fan is still blowing like a maniac. I have tried to install Linux Mint 15 previously and I have had the same problems with the fan. Any idea how to fix it?

    Read the article

  • 12.04 Dual Monitor Configuration changes to "Mirrored" automatically

    - by Josef
    After installing 12.04 on my Samsung X120 Notebook (with Intel GMA 4500 internal graphics card) i have a Problem with the configuration off my 2nd monitor. Its a 22" with 1680 * 1050 Pixel connected via HDMI. I use the display configuration and set internal display=off and external display=main display. That works fine. After rebooting i still have that configuration, but after a while (often when i press a button on the keyboard), the configuration automatically changes to "Mirror Screen" and the internal display switches on. Both displays then have a bad resolution. When i do the manual display configuration again, everything is fine for the duration of that session. What could be the problem, that this display configuration gets lost / resets?

    Read the article

  • Why did Ubuntu and Windows start hanging mysteriously after I took a vacation?

    - by Ashrey Goel
    I installed Ubuntu alongside my Windows 7, after partitioning my HDD using Easeus partitioning manager. It was working perfectly, no problems, no data lost or corruption. Then I went away for 2 days and in my absence I don't know what happened in that period, now both Windows 7 and Ubuntu keep hanging continuously, like when you paint and change a brush it'll hang, I mean on very simple commands and I know my computer does not hang on such petty things. I use it for developing music and the specification are: Model: DELL-XPS Processor: Intel i5, 2.53 GHz RAM/Memory: 4GB Hard disk size: 500GB HDD Windows 7 partition: 417 GB Ubuntu Partition: 50 GB Please Help.

    Read the article

  • Consuming JSON stream into AWS Database on the cheap

    - by wjl
    I'm working on a project that needs to consume a JSON stream (approximately 1MB / minute), and parse and insert objects into a database. Amazon's DynamoDB or SimpleDB seem like attractive options for this. Is there a web service that can run a very simple script to eat the data and put it in a database? I could use a worker on Heroku or Elastic Beanstalk, or even pure EC2, but I'd like to find a service that's much cheaper, due to the very low amount of bandwidth and CPU required. (Sorry for the crappy tags. I'm not even sure where to categorize this question.)

    Read the article

  • .NET development on a Retina MacBook Pro with Windows 8

    - by Jeff
    I remember sitting in Building 5 at Microsoft with some of my coworkers, when one of them came in with a shiny new 11” MacBook Air. It was nearly two years ago, and we found it pretty odd that the OEM’s building Windows machines sucked at industrial design in a way that defied logic. While Dell and HP were in a race to the bottom building commodity crap, Apple was staying out of the low-end market completely, and focusing on better design. In the process, they managed to build machines people actually wanted, and maintain an insanely high margin in the process. I stopped buying the commodity crap and custom builds in 2006, when Apple went Intel. As a .NET guy, I was still in it for Microsoft’s stack of development tools, which I found awesome, but had back to back crappy laptops from HP and Dell. After that original 15” MacBook Pro, I also had a Mac Pro tower (that I sold after three years for $1,500!), a 27” iMac, and my favorite, a 17” MacBook Pro (the unibody style) with an SSD added from OWC. The 17” was a little much to carry around because it was heavy, but it sure was nice getting as much as eight hours of battery life, and the screen was amazing. When the rumors started about a 15” model with a “retina” screen inspired by the Air, I made up my mind I wanted one, and ordered it the day it came out. I sold my 17”, after three years, for $750 to a friend who is really enjoying it. I got the base model with the upgrade to 16 gigs of RAM. It feels solid for being so thin, and if you’ve used the third generation iPad or the newer iPhone, you’ll be just as thrilled with the screen resolution. I’m typically getting just over six hours of battery life while running a VM, but Parallels 8 allegedly makes some power improvements, so we’ll see what happens. (It was just released today.) The nice thing about VM’s are that you can run more than one at a time. Primarily I run the Windows 8 VM with four cores (the laptop is quad-core, but has 8 logical cores due to hyperthreading or whatever Intel calls it) and 8 gigs of RAM. I also have a Windows Server 2008 R2 VM I spin up when I need to test stuff in a “real” server environment, and I give it two cores and 4 gigs of RAM. The Windows 8 VM spins up in about 8 seconds. Visual Studio 2012 takes a few more seconds, but count part of that as the “ReSharper tax” as it does its startup magic. The real beauty, the thing I looked most forward to, is that beautifully crisp C# text. Consolas has never looked as good as it does at 10pt. as it does on this display. You know how it looks great at 80pt. when conference speakers demo stuff on a projector? Think that sharpness, only tiny. It’s just gorgeous. Beyond that, everything is just so responsive and fast. Builds of large projects happen in seconds, hundreds of unit tests run in seconds… you just don’t spend a lot of time waiting for stuff. It’s kind of painful to go back to my 27” iMac (which would be better if I put an SSD in it before its third birthday). Are there negatives? A few minor issues, yes. As is the case with OS X, not everything scales right. You’ll see some weirdness at times with splash screens and icons and such. Chrome’s text rendering (in Windows) is apparently not aware of how to deal with higher DPI’s, so text is fuzzy (the OS X version is super sharp, however). You’ll also have to do some fiddling with keyboard settings to use the Windows 8 keyboard shortcuts. Overall, it’s as close to a no-compromise development experience as I’ve ever had. I’m not even going to bother with Boot Camp because the VM route already exceeds my expectations. You definitely get what you pay for. If this one also lasts three years and I can turn around and sell it, it’s worth it for something I use every day.

    Read the article

  • 64 bit Ubuntu sees half my RAM

    - by koehn
    This is on my AMD FX(tm)-4100 Quad-Core Processor (according to /proc/cpuinfo) on a machine with two 4GB RAM DIMMs. BIOS shows 8GB RAM installed. Any help would be appreciated. RAM: Extreme Performance Sector 5 G Series 8GB DDR3-1333 (PC3-1066) Enhanced Latency Dual Channel Desktop Memory Kit (Two 4GB Memory Modules) MB: GA-78LMT-S2P Socket AM3+ 760G mATX AMD Motherboard CPU: FX 4100 Black Edition 3.6GHz Quad-Core Socket AM3+ Boxed Processor Here's what the software says: $ free total used free shared buffers cached Mem: 3515100 3293656 221444 0 19260 2670352 -/+ buffers/cache: 604044 2911056 Swap: 3650556 90916 3559640 $ uname -a Linux mythbuntu 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux From lshw: *-memory description: System Memory physical id: 20 slot: System board or motherboard size: 4GiB *-bank:0 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 0 serial: None slot: A0 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns) *-bank:1 description: DIMM 1066 MHz (0.9 ns) product: None vendor: None physical id: 1 serial: None slot: A1 size: 2GiB width: 64 bits clock: 1066MHz (0.9ns)

    Read the article

  • What's the story with TRIM support?

    - by Kent Boogaart
    The situation with TRIM in Ubuntu has me utterly confused. I don't know whether I need to manually run it or not. Sources I've found are disparate and unclear. I have Ubuntu 10.04 with latest updates (including kernel 2.6.32-26). I have an Intel X-25M drive with latest firmware, and it is formatted as ext4. So, does TRIM support run automatically? If not, how do I check if I need to run it, and then how do I run it if necessary?

    Read the article

  • How to automatically change volume level when un-/plugging headphones?

    - by htorque
    What I want is the following: When I plug in my headphones, I want the sound to be un-muted and set to a specific volume level. When I unplug my headphones, I want the sound to be muted (or set to a specific volume level). Setting the volume levels isn't the problem, but I somehow need to do this when un-/plugging the headphones, so I'm looking for a way to get notified of those events. I quickly found /proc/asound/card0/codec#0 to indicate whether headphones are plugged in or not, so I tried to monitor it using inotifywait and change the volume level based on modified notifications. Unfortunately inotifywait failed because proc isn't an ordinary filesystem. Are there other ways to do this (maybe via PulseAudio)? Audio device: Intel HDA, audio codec: Conexant CX20585.

    Read the article

  • Some websites are not opening in any web browser (firefox/chrome). What should I do? [closed]

    - by Jamal
    Some websites are not opening in my system. I am using Ubuntu 12.10. Earlier, when I was using Ubuntu 10.10,11.10 there was no such issue. The problem was started in ubuntu 12.04, but it remained the same even after formatting and installing ubuntu 12.10. I have tried Firefox as well as Chromium and I am sure the issue is not with the browser. same websites are opening perfectly with Windows. Google, Twitter and Ubuntu related websites are running perfect. Other websites like www.downrightnow.com, easy-mantra.com, facebook.com, sourceforge.net are not opening. Installed dual boot with win xp. Ubuntu 12.10 is 64 bit. Processor Intel core i3, RAM 4GB. $ cat /etc/resolv.conf <-- Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) -- DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN -- output --> nameserver 127.0.1.1

    Read the article

  • OpenGL (glx) not working with ubuntu 12.10

    - by user26766
    It all started when I installed nvidia's own (download from website) driver. Uninstalling it and reverting back to nvidia-current didn't solve the problem, so I have been playing with this for a while. It seems glx support is missing, and my intel graphics is not responding. gnome loads only in fallback mode. Here are some outputs: glxinfo name of display: :0.0 Error: couldn't find RGB GLX visual or fbconfig glxgears Error: couldn't get an RGB, Double-buffered visual optirun glxgears works fine lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff) Here's the content of log file when just after running glxinfo: less /var/log/Xorg.0.log | grep gl [ 112.156] (II) LoadModule: "glx" [ 112.157] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 112.157] (II) Module glx: vendor="X.Org Foundation" [ 112.157] (II) UnloadModule: "glx" [ 112.157] (II) Unloading glx [ 112.157] (EE) Failed to load module "glx" (module requirement mismatch, 0) Some more info... lsmod Module Size Used by bbswitch 13612 0 pci_stub 12623 1 vboxpci 23195 0 vboxnetadp 25671 0 vboxnetflt 23480 0 vboxdrv 320372 3 vboxpci,vboxnetadp,vboxnetflt parport_pc 32689 0 ppdev 17074 0 bnep 18141 2 rfcomm 46620 12 binfmt_misc 17501 1 snd_hda_codec_hdmi 32049 1 snd_hda_codec_realtek 78147 1 joydev 17458 0 uvcvideo 76750 0 videobuf2_core 32852 1 uvcvideo videodev 120310 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12861 1 uvcvideo videobuf2_memops 13405 1 videobuf2_vmalloc snd_hda_intel 33492 3 coretemp 13401 0 kvm_intel 132760 0 arc4 12530 2 snd_hda_codec 134213 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel kvm 414111 1 kvm_intel iwlwifi 386837 0 i915 520799 2 snd_hwdep 17699 1 snd_hda_codec snd_pcm 96668 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec psmouse 100389 0 drm_kms_helper 49113 1 i915 ghash_clmulni_intel 13221 0 snd_seq_midi 13325 0 snd_rawmidi 30513 1 snd_seq_midi btusb 22475 0 drm 288436 3 i915,drm_kms_helper serio_raw 13216 0 snd_seq_midi_event 14900 1 snd_seq_midi snd_seq 61555 2 snd_seq_midi,snd_seq_midi_event mac80211 535936 1 iwlwifi bluetooth 209249 22 bnep,rfcomm,btusb snd_timer 29426 2 snd_pcm,snd_seq snd_seq_device 14498 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78921 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device cfg80211 206797 2 iwlwifi,mac80211 aesni_intel 51038 1 cryptd 20404 2 ghash_clmulni_intel,aesni_intel aes_x86_64 17256 1 aesni_intel dell_wmi 12682 0 sparse_keymap 13891 1 dell_wmi dcdbas 14439 0 i2c_algo_bit 13414 1 i915 microcode 22804 0 lpc_ich 17062 0 soundcore 15048 1 snd snd_page_alloc 18485 2 snd_hda_intel,snd_pcm video 19391 1 i915 mac_hid 13206 0 wmi 19071 1 dell_wmi mei 40691 0 lp 17760 0 parport 46346 3 parport_pc,ppdev,lp ahci 25721 3 libahci 31192 1 ahci atl1c 41102 0 how can I fix this? any ideas? Here is another thing I've tried: sudo apt-get purge nvidia* sudo reboot sudo apt-get install bumblebee bumblebee-nvidia didn't make any difference. The most relevant post I found on the web was this: http://ubuntuforums.org/archive/index.php/t-1722306.html Here it's explained that the problem is with the priority of shared libraries that are loaded for glxinfo. Here's what I get when I look up the libraries: linux-vdso.so.1 => (0x00007fff6bf8b000) libGL.so.1 => /usr/lib/x86_64-linux-gnu/mesa/libGL.so.1 (0x00007f22d6ccd000) libX11.so.6 => /usr/lib/x86_64-linux-gnu/libX11.so.6 (0x00007f22d6993000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f22d65d3000) libglapi.so.0 => /usr/lib/x86_64-linux-gnu/libglapi.so.0 (0x00007f22d63ad000) libXext.so.6 => /usr/lib/x86_64-linux-gnu/libXext.so.6 (0x00007f22d619b000) libXdamage.so.1 => /usr/lib/x86_64-linux-gnu/libXdamage.so.1 (0x00007f22d5f97000) libXfixes.so.3 => /usr/lib/x86_64-linux-gnu/libXfixes.so.3 (0x00007f22d5d91000) libX11-xcb.so.1 => /usr/lib/x86_64-linux-gnu/libX11-xcb.so.1 (0x00007f22d5b8f000) libxcb-glx.so.0 => /usr/lib/x86_64-linux-gnu/libxcb-glx.so.0 (0x00007f22d5977000) libxcb.so.1 => /usr/lib/x86_64-linux-gnu/libxcb.so.1 (0x00007f22d5759000) libXxf86vm.so.1 => /usr/lib/x86_64-linux-gnu/libXxf86vm.so.1 (0x00007f22d5553000) libdrm.so.2 => /usr/lib/x86_64-linux-gnu/libdrm.so.2 (0x00007f22d5346000) libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f22d5129000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f22d4f25000) /lib64/ld-linux-x86-64.so.2 (0x00007f22d6f54000) libXau.so.6 => /usr/lib/x86_64-linux-gnu/libXau.so.6 (0x00007f22d4d20000) libXdmcp.so.6 => /usr/lib/x86_64-linux-gnu/libXdmcp.so.6 (0x00007f22d4b1a000) librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f22d4911000) It seems "mesa" instead of nvidia-current is being used. However I didn't find any obvious link to /lib/nvidia-current in /etc/ld.so.conf (where the directories containing the shared libraries are listed). I don't know if there's anything missing or if this is normal. thanks, UPDATE: The problem was solved by updating to Ubuntu 13.04. It seems bumblebee was to blame, but I'm not sure what was going wrong...

    Read the article

  • Custom Silent HTPC Uses Entire Case as a Heatsink

    - by Jason Fitzpatrick
    This silent media center PC dissipates heat in a rather clever way; the entire back of the case is one giant heatsink. Courtesy of computer enthusiast and tinker DeFex, the build isn’t just silent but quite eye catching too. He used a combination of one massive heatsink, custom brackets, acrylic, and bicycle spokes to create a sleek case that looks as much like a computer-inspired work of art as it does a media center computer. Hit up the link below to check out the build gallery and see how he mated the CPU to the heatsink-body with a custom milled aluminum bridge. Heatsink HTPC [via Hack A Day] Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    Read the article

  • Problems after installing Ubuntu 11.10

    - by Andrew Orr
    I'm having trouble with Ubuntu 11.10. It has to do with nomodeset. After I boot into Ubuntu, it goes to a purple screen for about 10 seconds and then goes blank. After that nothing happens. I've read other people's questions about this and I know it has to do with enabling nomodeset. This worked for me when I was using the LiveCD mode, but now Ubuntu is permanently installed as a dual-boot system. Going into recovery mode doesn't work, pressing "e" in the boot loader and writing nomodeset after quiet splash doesn't work either. Holding shift any time it's booting doesn't work. I don't know what to do anymore. I have an HP Pavilion dv6 laptop with an AMD A6-3400M CPU, and my GPU is an AMD Radeon HD 6520G. I've never worked with Linux before so taking me through this step-by-step would be great. Thanks!

    Read the article

  • Choppy video in vlc even with hardware acceleration on ATI Radeon HD

    - by l0b0
    After installing Catalyst 11.12 and studying instructions (1, 2) to enable hardware acceleration I ended up with the following command: sudo apt-get install xvba-va-driver libva-glx1 vainfo && \ vainfo && \ vlc --verbose 2 --ffmpeg-hw video.1080p.x264.mkv The output confirms that it's using the VA API: avcodec decoder: Using VA API version 0.32 for hardware decoding. But even after a reboot the video still looks choppy. There's no vlc output to indicate that the codec is having trouble, or that it's skipping frames. Any idea what could be the problem? Using vlc 1.1.12 with default settings. Also tried (in sequence): sudo apt-get install libva-glx1 sudo apt-get install --reinstall libgl1-mesa-glx:i386 libgl1-mesa-glx:amd64 libgl1-mesa-dri:i386 libgl1-mesa-dri:amd64 xserver-xorg-core Rebooting No luck yet. Specs from /proc/cpuinfo : Intel Core i7 CPU 950 @ 3.07GHz

    Read the article

  • Mac mini 2012 graphic upgrade for UE4 Unity3D Blender

    - by DaCrAn
    I have a mac mini (late 2012) i7, 16gb ram Vengeance graphic card intel HD4000. I buy recently a thunderbolt expansion PCIE whit support a graphic card PCIE 2.0 16x whit space for Full leght card. I have dubts about what graphic card gona give me the best results for using the Unreal Engine 4 UE4 or Unity3D, and Blender. My badget cover a Nvidia Quadro K4000 3gb or ATI Firepro W7000 4gb. Any recomendation? What professional graphic card can be better for design games in 3D? Thanks. DaCrAn

    Read the article

  • Two new features in November 2009 CTP

    - by kaleidoscope
    Windows Azure Diagnostics Managed Library: The new Diagnostics API enables logging using standard .NET APIs. The Diagnostics API provides built-in support for collecting standard logs and diagnostic information, including the Windows Azure logs, IIS 7.0 logs, Failed Request logs, crash dumps, Windows Event logs, performance counters, and custom logs. Variable-size Virtual Machines (VMs): Developers may now specify the size of the virtual machine to which they wish to deploy a role instance, based on the role's resource requirements. The size of the VM determines the number of CPU cores, the memory capacity, and the local file system size allocated to a running instance. e.g.: <WebRole name=”WebRole1” vmsize=”ExtraLarge”> Supported values for the ‘vmsize’ are: 1. Small 2. Medium 3. Large 4.       ExtraLarge More information for Diagnostics Managed Library can be found at: http://msdn.microsoft.com/en-us/library/ee758705.aspx   Girish, A

    Read the article

  • Ubuntu studio/xubuntu 12.04 instead of Ubuntu 12.04/12.10 for CAD/ arhcitectural workflow. Worth it?

    - by gabriel
    I am currently using Ubuntu 12.10. So, as described in the title I am planning to install Ubuntu studio. The programs i use are Blender, Maya 2013, NukeX, Bricscad, Sketchup (with wine) and also i am planning to install revit architecture through VirtualBox. Well, I am using a quad-core CPU and i want to have all the power of my system for rendering/modelling. So, i decided to try a more lightweight desktop than unity. Also, what made me to decide this, is that when i tried to install Bricscad v12 the program does not work. So, i thought that if i want something more professional for my work i should have only LTS versions of lightweight Ubuntu. So, my 2 questions are :1) Worth it? 2) Can i have global menu(close,minimize,maximize buttons, menu) like ubuntu/unity? Thanks

    Read the article

  • Lenovo Y460 Shutdown/Reboot/Logoff doesn't work

    - by ultimatebuster
    This is a part of the massive dump of problems I'm encountering with my Lenovo Y460 and Ubuntu. Problem: Cannot shutdown/reboot/logoff. Logoff issue: http://ubuntuforums.org/showthread.php?t=1791439 Shutdown and Reboot often freezes without doing anything. Currently can only use hard reset. Maybe related to the tricks I did to work around the ATI/Intel issue. See: Lenovo Y460 ATI PowerXpress issue I'm not sure where I can find the shutdown/reboot logs. If you tell me I'll be happy to provide them. Not sure what to do as of right now other than never shutdown/reboot or logoff

    Read the article

  • No sound while playing multi-media in Ubuntu 12.04 for XPS15

    - by ved2254
    I have an XPS15 laptop, core i5, 8GB ram. Whenever I login my laptop I here the startup bongo sound. But my sound system just doesn't play anything, may it be a short audio clip or a movie. Output of lshw -c multimedia is : WARNING: you should run this program as super-user. *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:51 memory:f1c00000-f1c03fff WARNING: output may be incomplete or inaccurate, you should run this program as super-user. Headphones work just fine but there is no sound from the speakers. Is it a bug in multi-media players or ALSA?

    Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >