Search Results

Search found 5105 results on 205 pages for 'words'.

Page 185/205 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

• Lag spikes at full CPU usage, lagy mouse, maybe video card

  - by Roberts

  My PC specs: Motherboard Name - Gigabyte GA-945PL-S3 CPU Type - DualCore Intel Core 2 Duo E4300, 1800 MHz (9 x 200) OS - Microsoft Windows 7 Ultimate OS Kernel Type - 32-bit OS Version - 6.1.7601 I bougth a new video card one month ago. GeForce 210. I didn't have any problems. I wanted to overclock it, in other words: "Play with it". So I installed Gigabyte EasyBoost from CD and overclocked the GPU 590 + 110 mhz, memory to max to 960mhz from 800mhz. Benchmarks showed a little bit bigger score. Then I overclocked shader clock from 1405 to [..] (don't remeber really). So I was playing Modern Warfare 2 when off sudden computer froze when I wanted to select team, I was afk before that. I had to reset CMOS. After that I had problems with Skype: unread messages and no sound. Then I figured it out that when ever I open EasyBoost - Skype starts to glitch again. Now I use EVGA Precission X. Now after a month, I cleaned computer and closed the case, it was open all the time. I started to overclock GPU clock only (just a bit) because there was no problems that would stop me. So sometimes on heavy CPU load graphics starts to lag. Dragging a window is painful to watch too. Sometimes the screen freezes for 5 to 10 seconds (I can see that hard disk activity is maximal). You may say that CPU fault it is, isn't it? But sometimes lag spikes starts randomly when CPU load is at maximum. All 3 benchmark softwares (PerformanceTest, NovaBench and MSI Kombustor) shows that performance of my video card has dropped about 25%. BUT! CPU score is lower too. I ignored these problems but when I refreshed Windows Experience Index I was shocked. Month before (in latvian language but not so hard to understand): Now 01.04.2012 (upgraded RAM): This happened when I tried to capture Minecraft with Fraps on underclocked GPU to 580mhz (def: 590mhz): All drivers are up to date. Average CPU temperature from 55°C to 75°C (at 70°C sometimes starts these lag spikes). Video card's tempratures are from 45°C to 60°C (very hard to reach 60°C). So my hope is that the video card is fine, cause this card is very new and I want to upgrade CPU anyways. Aplogies for my mistakes in vocabulary (I am trying to type this as fast I can). Update 02.04.2012 - 7:21 Forgot one thing, my hard disk is extrimly slow and I will upgrade it this week or next week so I will be installing same OS again. I am multi-tasker but I can't do much because of 1.8 GHz CPU and slow hard drive (Model ID - WDC WD800JD-60JRC0). The Windows Experience Index is back to normal. Actually "Spelu grafika" (Gaming graphics) are higher than month ago. During this test mouse was very lagy, but month ago there weren't any problems. WHY!?

  Read the article

• Intelligent "Subtraction" of one text logfile from another

  - by Vi

  Example: Application generates large text log file A with many different messages. It generates similarly large log file B when does not function correctly. I want to see what messages in file B are essentially new, i.e. to filter-out everything from A. Trivial prototype is: Sort | uniq both files Join files sort | uniq -c grep -v "^2" This produces symmetric difference and inconvenient. How to do it better? (including non-symmetric difference and preserving of messages order in B) Program should first analyse A and learn which messages are common, then analyse B showing with messages needs attention. Ideally it should automatically disregard things like timestamps, line numbers or other volatile things. Example. A: 0:00:00.234 Received buffer 0x324234 0:00:00.237 Processeed buffer 0x324234 0:00:00.238 Send buffer 0x324255 0:00:03.334 Received buffer 0x324255 0:00:03.337 Processeed buffer 0x324255 0:00:03.339 Send buffer 0x324255 0:00:05.171 Received buffer 0x32421A 0:00:05.173 Processeed buffer 0x32421A 0:00:05.178 Send buffer 0x32421A B: 0:00:00.134 Received buffer 0x324111 0:00:00.137 Processeed buffer 0x324111 0:00:00.138 Send buffer 0x324111 0:00:03.334 Received buffer 0x324222 0:00:03.337 Processeed buffer 0x324222 0:00:03.338 Error processing buffer 0x324222 0:00:03.339 Send buffer 0x3242222 0:00:05.271 Received buffer 0x3242FA 0:00:05.273 Processeed buffer 0x3242FA 0:00:05.278 Send buffer 0x3242FA 0:00:07.280 Send buffer 0x3242FA failed Result: 0:00:03.338 Error processing buffer 0x324222 0:00:07.280 Send buffer 0x3242FA failed One of ways of solving it can be something like that: Split each line to logical units: 0:00:00.134 Received buffer 0x324111,0:00:00.134,Received,buffer,0x324111,324111,Received buffer, \d:\d\d:\d\d\.\d\d\d, \d+:\d+:\d+.\d+, 0x[0-9A-F]{6}, ... It should find individual words, simple patterns in numbers, common layouts (e.g. "some date than text than number than text than end_of_line"), also handle combinations of above. As it is not easy task, user assistance (adding regexes with explicit "disregard that","make the main factor","don't split to parts","consider as date/number","take care of order/quantity of such messages" rules) should be supported (but not required) for it. Find recurring units and "categorize" lines, filter out too volatile things like timestamps, addresses or line numbers. Analyse the second file, find things that has new logical units (one-time or recurring), or anything that will "amaze" the system which has got used to the first file. Example of doing some bit of this manually: $ cat A | head -n 1 0:00:00.234 Received buffer 0x324234 $ cat A | egrep -v "Received buffer" | head -n 1 0:00:00.237 Processeed buffer 0x324234 $ cat A | egrep -v "Received buffer|Processeed buffer" | head -n 1 0:00:00.238 Send buffer 0x324255 $ cat A | egrep -v "Received buffer|Processeed buffer|Send buffer" | head -n 1 $ cat B | egrep -v "Received buffer|Processeed buffer|Send buffer" 0:00:03.338 Error processing buffer 0x324222 0:00:07.280 Send buffer 0x3242FA failed This is a boring thing (there are a lot of message types); also I can accidentally include some too broad pattern. Also it can't handle complicated things like interrelation between messages. I know that it is AI-related. May be there are already developed tools?

  Read the article

• Why do we need different CPU architecture for server & mini/mainframe & mixed-core?

  - by claws

  Hello, I was just wondering what other CPU architectures are available other than INTEL & AMD. So, found List of CPU architectures on Wikipedia. It categorizes notable CPU architectures into following categories. Embedded CPU architectures Microcomputer CPU architectures Workstation/Server CPU architectures Mini/Mainframe CPU architectures Mixed core CPU architectures I was analyzing the purposes and have few doubts. I taking Microcomputer CPU (PC) architecture as reference and comparing others. Embedded CPU architecture: They are a completely new world. Embedded systems are small & do very specific task mostly real time & low power consuming so we do not need so many & such wide registers available in a microcomputer CPU (typical PC). In other words we do need a new small & tiny architecture. Hence new architecture & new instruction RISC. The above point also clarifies why do we need a separate operating system (RTOS). Workstation/Server CPU architectures I don't know what is a workstation. Someone clarify regarding the workstation. As of the server. It is dedicated to run a specific software (server software like httpd, mysql etc.). Even if other processes run we need to give server process priority therefore there is a need for new scheduling scheme and thus we need operating system different than general purpose one. If you have any more points for the need of server OS please mention. But I don't get why do we need a new CPU Architecture. Why cant Microcomputer CPU architecture do the job. Can someone please clarify? Mini/Mainframe CPU architectures Again I don't know what are these & what miniframes or mainframes used for? I just know they are very big and occupy complete floor. But I never read about some real world problems they are trying to solve. If any one working on one of these. Share your knowledge. Can some one clarify its purpose & why is it that microcomputer CPU archicture not suitable for it? Is there a new kind of operating system for this too? Why? Mixed core CPU architectures Never heard of these. If possible please keep your answer in this format: XYZ CPU architectures Purpose of XYZ Need for a new architecture. why can't current microcomputer CPU architecture work? They go upto 3GHZ & have upto 8 cores. Need for a new Operating System Why do we need a new kind of operating system for this kind of archictures?

  Read the article

• Alternative Methods of Sharing Folders in Windows?

  - by Blaenk

  Hey guys. I'm running Windows 7 and as of now I simply share folders as one usually does in Windows. I then have a MacBook with Leopard (Now Snow Leopard) which I use to connect to my computer to mount the shares by going to Finder, then CMD + K and typing smb://BlaenkPC (The name of my PC) into the address box. This consequently connects to my computer and mounts all of the shares. The problem is that sometimes, if for example I close my MacBook (Which makes it go to sleep) or sometimes even without doing that, the connection somehow drops. Sometimes I close the MacBook and upon re-opening it, everything still works; it's random. It still shows the computer as being connected, but it just shows 'loading' indefinitely. If I hit 'eject' with the intention of re-connecting to the computer, it disappears from the sidebar (The Computer Icon) in Finder, but I cannot re-connect. Activity Monitor (or ps aux, whichever) both show hung instances of umount; one for each share that was mounted. I cannot kill these processes with kill or killall (Yes, even with sudo, and sending signal -9). This has happened to me before, and here is another person who has experienced this. My question boils down to this: Is there an alternative method of sharing folders in Windows, that my Mac can read/understand, that is possibly more reliable and preferably just as fast? I usually use the mounted shares to watch television episodes off my computer, or movies, etc. (In other words, I open them in VLC and they automatically stream from my computer). As far as I can tell, this is a problem with the Samba protocol. I have heard of NFS, but I am not sure if I would have to re-format my drives, or what. I don't mind running a service or daemon to allow the sharing of the folders, I just want it to be done and hopefully in a better way than typical Windows shares through Samba. Usually when I encounter this problem, which is often (read: every day), I have no other option but to restart the MacBook. As I stated in the first question I linked to, shutting down and restarting don't work; I have to manually force the shutdown by holding the power button. I have not modified my installation of Mac OS X in any hackish way, so I doubt it's something with the Operating System, but worst come to worst, I might end up reformatting and doing a clean install to see if that fixes anything, as I am at a complete loss as to what may be causing the problem, and no one else seems to have any idea or care, despite there being quite a few people suffering from this problem, as my research has shown. Any pieces of information that can help are extremely appreciated. You don't have to answer every question on here, but maybe even some insight as to why it might not be possible to kill those hung umount instances for example, or why I may not be able to reconnect using samba (Is it something regarding the way the protocol works?). One thing to note is that I have another computer in the home network that doesn't seem to have this problem. However, it is also running Windows 7 (Note though that I am not using the homegroup feature, but the typical windows sharing feature). My only deduction is that the problem is being caused by the way the Mac (Or Samba implementation, whichever) is handling things. Perhaps it is a limitation.

  Read the article

• BSOD Code 16, artifacts all over the place (gtx 260)

  - by belinea

  I have a following, quite dated rig E8400 Core 2 Duo cpu Intel Dragontail Peak DP35DP motherboard on Intel Bearlake P35 chipset 4GB ram Geforce 260gtx Corsair 650W PSU Windows 7 64 bit The following things has happened in the last few days. I first decided to update my Nvidia drivers to the latest version. That was 4 days ago. PC worked fine for 2 days and I was able to play few games as well without any problems. Then 2 days ago a first crash happened while playing the new XCOM game. BSOD code 16. Just the blue screen, no artifacts. PC rebooted and worked well again, I continued playing this game for another 2 hours and went to sleep. Next evening I tried to play some BF3 multiplayer (use to play on LOW settings). Approx. 10 minutes into the game red/pink-ish artifacts appeared on the screen and game quit to desktop. Restarted the game and another 3-4 minutes afterwards another crash to desktop but this time followed shortly by BSOD Code 16. From that moment I started to seeing artifacts on random startups, including Windows loading screen and the BIOS itself. Windows would still load but soon enough it would BSOD on a simple task like opening a Internet browser. Today I get tons of artifacts (little small red dashes all over the screen) on BIOS, loading screen, normal Windows mode as well as safe mode. I suspect it wouldn't be drivers but I tried removing and sweeping them entirely in the safe mode. PC would still start with artifacts all over the place but would load the normal mode, just without the driver, in the default lowest resolution. As soon as proper Nvidia drivers are installed though and PC rebooted, Windows doesn't load at all as BSOD now appears on loading screen. However, again, if I go to safe mode and remove drivers, normal mode launches fine. So obviously crash happens only on high resolution. I opened my machine this morning and gave it a proper cleaning even though it wasn't heavily dusted. It didn't help and number of artifacts seems to increase with every PC restart. I write these words in safe mode, which works, but I have to look through all the red dots and dashes. I don't have built in GPU chipset so I can't try removing my Geforce card nor can I borrow A GPU from anyone else. What are my options? I was looking into getting a completely new rig around Christmas so I'm not freaking out about this. If everything points to hardware issue I may simply decide to get the new machine earlier and don't bother with fixing this one. However it would be great to learn more if this is indeed situation that has slim chances of getting sorted. I realize BSOD Code 16 is rather popular topic online but every story seems a bit different and there can be number of issues with it. Hence a new thread.

  Read the article

• Hard drive write speed - finding a lighter antivirus?

  - by Shingetsu

  I recently have been getting a lot of system lag here (for example, the mouse and the display in general take about 15 seconds to react in the worst cases). After a lot of monitoring the resources, I found that the problem mainly happens when too much Disk I/O is being done. Three culprits have been identified: My browser had the highest write I/O with 35,000,000 I/O Write Bytes. Steam had the highest read I/O (when IDLE!!!) with 106,000,000 I/O Read Bytes. My antivirus (in both cases I will soon mention) was the runner up in both cases with: 30,000,000ish write and 80,000,000ish read. The first AV I had was Avast! which I had liked on my previous system. After noticing it taking so much I/O I switched to Panda (supposing it wouldn't use TOO much during idle phase). However it only used a bit less I/O. Just a lot less memory and cpu and somewhat more network. My browser at the moment is Maxthon 3 (which I like a lot). Before this I was running chrome which had similar data and much higher cpu when running in the background was enabled. I'm not going to be running steam all the time and there aren't many alternatives to it. I like my browser very much, but I AM willing to switch if there's an obvious problem (I'm in programming, however I'm not a very good sysadmin, especially not when it comes to windows). Finally, my system almost stops lagging when I turn off the antivirus (and preferably steam) (some remains but once in every 5-6 hours for a few seconds so it isn't a big problem). My question (has a few parts): Is it possible to configure steam to lower it's I/O usage? (and maybe network while we're at it?) Which antivirus (very preferably free) uses lowest I/O while idle (I leave PC alone during active scans so that isn't a problem). Is there an obvious problem with my current browser and, if so, is there a way to fix it or should I switch and, if so, to what? (P.S. I've been on FFox for some time too). Info on system: Windows 7 (32 bit T_T, I am getting a new one in a few months but I want to keep using system during that time though). Hard Drive (main) is a Raid0. (Also have an external 1TB one which contains steam (and steam alone). As such it doesn't get used by much anything other than steam and isn't a very large problem. However steam still uses some I/O of registry) CPU: Intel(R) Core(TM)2 CPU [email protected] RAM: 6GB (3.25GB usable) (this and CPU have little effect as shown in next section) Additional info: Memory usage during problematic times: 44% CPU usage during problematic times: 35% Page File: main drive: system managed. 1TB drive: none. The current system I'm using is about 6 years old and is mainly a place holder while I await the new one in a few months. Final words: this is my 1st post on Super User (this question wouldn't feel right on Stack Overflow where I usually stay). If it doesn't have it's place here please tell me. If anything is wrong with it, same. Edit Technically I'm looking for a live thread detection program with minimal IO usage. I already have good active scan capability: Kaspersky (the free scanner uses the paid database) and MalwareBytes. Edit 2 Noticed another one, it seems that windows media player has been using stuff even when off! Turning it off and restarting now. If the problem is fixed I'll tell you guys. The reason I didn't notice it before was because I didn't have resource manager in front of me at the MOMENT of the problem. Now I did and it was at the very top of the list!

  Read the article

• Network config / gear question

  - by mcgee1234

  I have been tasked with setting up a fairly straightforward rack in a data center (we do not even need a whole rack, but this is the smallest allotment available). In a nutshell, 4 to 6 servers need to be able to reach 2 (maybe 3) vendors. The servers needs to be reachable over the internet. A little more detail - the networks the servers need to reach are inside of the data center, and are "trusted". Connections to these networks will be achieved through intra data center cross connects. It is kind of like a manufacturing line where we receive data from one vendor (burst-able up to 200 Mbits), churn through it on the servers, and then send out data to another vendor (bursts up to 20 Mbits). This series of events is very latency sensitive, so much so that it is common practice not to use NAT or a firewall on these segments (or so I hear). To reach the servers over the internet, I plan to use a site to site VPN. (This part is only relevant as far as hardware selection goes). I have 2 configurations in mind: Cisco 2911 (2921) (with the additional wan ports module) and a layer 2 switch - in this scenario, I would use the router also for VPN. Cisco 3560 layer 3 switch to interconnect the networks inside of the data center and an ASA 5510 (which is total overkill, but the 5505 is not rack mountable) as a firewall for the Wan side (internet) and VPN. I envision the setup to be as follows: Internet - ASA - 3560 Vendors - 3560 - Servers The general idea is that the ASA acts as a firewall and VPN device and the 3560 does all the heavy lifting. The first is a fairly traditional setup but my concern is performance. The second is somewhat unorthodox in that the vendors are directly connected to the layer 3 switch without passing through a firewall. Based on my understanding however, a layer 3 switch will perform substantially better as it will do hardware (ASIC) vs. software switching. (Note that number 2 is a little over the budget, but not unworkable (double negative, ugh)) Since this is my first time dealing with a data center, I am not sure what the IP space is going to look like. I suspect I will retain a block(s) of public IPs, vlan them to individual interfaces for the vendor connections and the servers (which will not reachable from the wan side of course) and setup routing on the switch. So here are my questionss: Is there a substantial performance difference between 1 and 2, i.e. hardware based switching on a layer 3 vs a software base on the 2911? I have trolled the internet and found a lot of Cisco literature, but nothing that I could really use to get a good handle. The vendors we connect to are secure and trusted (famous last words) and as I understand it, it is common practice not to NAT or firewall these connections (because of the aforementioned latency sensitivity). But what what kind of latency are we really talking about if I push the data through a router (or even ASA for that matter)? For our purposes, 5 ms will not kill us, 20 or 30 can be very costly. Others measure in microseconds, but they are out of our league. Is there any issues with using public IPs on a layer 3 switch? I am certainly not married to either of these configs, and I am totally open to any ideas. My knowledge (and I use the term loosely) is largely from books so I welcome any advice / insight. Thanks in advance.

  Read the article

• Word Spell Check pops up hidden and "freezes" my App

  - by Refracted Paladin

  I am using Word's Spell Check in my in house WinForm app. My clients are all XP machines with Office 2007 and randomly the spell check suggestion box pops up behind the App and makes everything "appear" frozen as you cannot get at it. Suggestions? What do other people do to work around this or stop it altogether? Thanks Below is my code, for reference, though I am doubtful that this has anything to do with my code but I'll take anything. public class SpellCheckers { public string CheckSpelling(string text) { Word.Application app = new Word.Application(); object nullobj = Missing.Value; object template = Missing.Value; object newTemplate = Missing.Value; object documentType = Missing.Value; object visible = false; object optional = Missing.Value; object savechanges = false; app.ShowMe(); Word._Document doc = app.Documents.Add(ref template, ref newTemplate, ref documentType, ref visible); doc.Words.First.InsertBefore(text); Word.ProofreadingErrors errors = doc.SpellingErrors; var ecount = errors.Count; doc.CheckSpelling(ref optional, ref optional, ref optional, ref optional, ref optional, ref optional, ref optional, ref optional, ref optional, ref optional, ref optional, ref optional); object first = 0; object last = doc.Characters.Count - 1; var results = doc.Range(ref first, ref last).Text; doc.Close(ref savechanges, ref nullobj, ref nullobj); app.Quit(ref savechanges, ref nullobj, ref nullobj); Marshal.ReleaseComObject(doc); Marshal.ReleaseComObject(app); Marshal.ReleaseComObject(errors); return results; } } And I call it from my WinForm app like so -- public static void SpellCheckControl(Control control) { if (IsWord2007Available()) { if (control.HasChildren) { foreach (Control ctrl in control.Controls) { SpellCheckControl(ctrl); } } if (IsValidSpellCheckControl(control)) { if (control.Text != String.Empty) { control.BackColor = Color.FromArgb(180, 215, 195); control.Text = Spelling.CheckSpelling(control.Text); control.Text = control.Text.Replace("\r", "\r\n"); control.ResetBackColor(); } } } }

  Read the article

• Error when logging in with Machinist in Shoulda test

  - by user303747

  I am having some trouble getting the right usage of Machinist and Shoulda in my testing. Here is my test: context "on POST method rating" do p = Product.make u = nil setup do u = login_as post :vote, :rating => 3, :id => p end should "set rating for product to 3" do assert_equal p.get_user_vote(u), 3 end And here's my blueprints: Sham.login { Faker::Internet.user_name } Sham.name { Faker::Lorem.words} Sham.email { Faker::Internet.email} Sham.body { Faker::Lorem.paragraphs(2)} User.blueprint do login password "testpass" password_confirmation { password } email end Product.blueprint do name {Sham.name} user {User.make} end And my authentication test helper: def login_as(u = nil) u ||= User.make() @controller.stubs(:current_user).returns(u) u end The error I get is: /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/validations.rb:1090:in `save_without_dirty!': Validation failed: Login has already been taken, Email has already been taken (ActiveRecord::RecordInvalid) from /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/dirty.rb:87:in `save_without_transactions!' from /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/transactions.rb:200:in `save!' from /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/connection_adapters/abstract/database_statements.rb:136:in `transaction' from /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/transactions.rb:182:in `transaction' from /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/transactions.rb:200:in `save!' from /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/transactions.rb:208:in `rollback_active_record_state!' from /home/jason/moderndarwin/vendor/rails/activerecord/lib/active_record/transactions.rb:200:in `save!' from /usr/lib/ruby/gems/1.8/gems/machinist-1.0.6/lib/machinist/active_record.rb:55:in `make' from /home/jason/moderndarwin/test/blueprints.rb:37 from /usr/lib/ruby/gems/1.8/gems/machinist-1.0.6/lib/machinist.rb:77:in `generate_attribute_value' from /usr/lib/ruby/gems/1.8/gems/machinist-1.0.6/lib/machinist.rb:46:in `method_missing' from /home/jason/moderndarwin/test/blueprints.rb:37 from /usr/lib/ruby/gems/1.8/gems/machinist-1.0.6/lib/machinist.rb:20:in `instance_eval' from /usr/lib/ruby/gems/1.8/gems/machinist-1.0.6/lib/machinist.rb:20:in `run' from /usr/lib/ruby/gems/1.8/gems/machinist-1.0.6/lib/machinist/active_record.rb:53:in `make' from ./test/functional/products_controller_test.rb:25:in `__bind_1269805681_945912' from /home/jason/moderndarwin/vendor/gems/thoughtbot-shoulda-2.10.2/lib/shoulda/context.rb:293:in `call' from /home/jason/moderndarwin/vendor/gems/thoughtbot-shoulda-2.10.2/lib/shoulda/context.rb:293:in `merge_block' from /home/jason/moderndarwin/vendor/gems/thoughtbot-shoulda-2.10.2/lib/shoulda/context.rb:288:in `initialize' from /home/jason/moderndarwin/vendor/gems/thoughtbot-shoulda-2.10.2/lib/shoulda/context.rb:169:in `new' from /home/jason/moderndarwin/vendor/gems/thoughtbot-shoulda-2.10.2/lib/shoulda/context.rb:169:in `context' from ./test/functional/products_controller_test.rb:24 I can't figure out what it is I'm doing wrong... I have tested the login_as with my auth (Authlogic) in my user_controller testing. Any pointers in the right direction would be much appreciated!

  Read the article

• Making mercurial subrepositories behave like subversion externals

  - by Emily Dickinson

  Hi guys, The FAQ, and hginit.com have been really useful for helping me make the transition from svn to hg. However, when it comes to using Hg's subrepository feature in the manner of subversion's externals, I've tried everythign and cannot replicate the nice behavior of svn externals. Here's the simplest example of what I want to do: Init "lib" repository This repository is never to be used as a standalone; it's always included by main repositories, as a sub-repository. Init one or more including repositories To keep the example simple, I'll "init" a repository called "main" Have "main" include "lib" as a subrepository Importantly -- AND HERE'S WHAT I CAN'T GET TO WORK: When I modify a file inside of "main/lib", and I push the modification, then that change gets pushed to the "lib" repository -- NOT to a copy inside of "main". Command lines speak louder than words. I've tried so many variations on this theme, but here's the gist. If someone can reply, in command lines, I'll be forever grateful! 1. Init "lib" repository $ cd /home/moi/hgrepos ## Where I'm storing my hg repositories, on my main server $ hg init lib $ echo "foo" lib/lib.txt $ hg add lib $ hg ci -A -m "Init lib" lib 2. Init "main" repository, and include "lib" as a subrepos $ cd /home/moi/hgrepos $ hg init main $ echo "foo" main/main.txt $ hg add main $ cd main $ hg clone ../lib lib $ echo "lib=lib" .hgsub $ hg ci -A -m "Init main" . This all works fine, but when I make a clone of the "main" repository, and make local modifications to files in "main/lib", and push them, the changes get pushed to "main/lib", NOT to "lib". IN COMMAND-LINE-ESE, THIS IS THE PROBLEM: $ /home/moi/hg-test $ hg clone ssh://[email protected]/hgrepos/lib lib $ hg clone ssh://[email protected]/hgrepos/main main $ cd main $ echo foo lib/lib.txt $ hg st M lib.txt $ hg com -m "Modified lib.txt, from inside the main repos" lib.txt $ hg push pushing to ssh://[email protected]/hgrepos/main/lib That last line of output from hg shows the problem. It shows that I've made a modification to a COPY of a file in lib, NOT to a file in the lib repository. If this were working as I'd like it to work, the push would be to hgrepos/lib, NOT to hgrepos/main/lib. I.e., I would see: $ hg push pushing to ssh://[email protected]/hgrepos/lib IF YOU CAN ANSWER THIS IN TERMS OF COMMAND LINES RATHER THAN IN ENGLISH, I WILL BE ETERNALLY GRATEFUL! Thank you in advance! Emily in Portland

  Read the article

• C++ vs Matlab vs Python as a main language for Computer Vision Postgraduate

  - by Hough

  Hi all, Firstly, sorry for a somewhat long question but I think that many people are in the same situation as me and hopefully they can also gain some benefit from this. I'll be starting my PhD very soon which involve the fields of computer vision, pattern recognition and machine learning. Currently, I'm using opencv (2.1) C++ interface and I especially like its powerful Mat class and the overloaded operations available for matrix and image seamless operations and transformations. I've also tried (and implemented many small vision projects) using opencv python interface (new bindings; opencv 2.1) and I really enjoy python's ability to integrate opencv, numpy, scipy and matplotlib. But recently, I went back to opencv C++ interface because I felt that the official python new bindings were not stable enough and no overloaded operations are available for matrices and images, not to mention the lack of machine learning modules and slow speeds in certain operations. I've also used Matlab extensively in the past and although I've used mex files and other means to speed up the program, I just felt that Matlab's performance was inadequate for real-time vision tasks, be it for fast prototyping or not. When the project becomes larger and larger, many tasks have to be re-written in C and compiled into Mex files increasingly and Matlab becomes nothing more than a glue language. Here comes the sub-questions: For postgrad studies in these fields (machine learning, vision, pattern recognition), what is your main or ideal programming language for rapid prototyping of ideas and testing algorithms contained in papers? For postgrad studies, can you list down the pros and cons of using the following languages? C++ (with opencv + gsl + svmlib + other libraries) vs Matlab (with all its toolboxes) vs python (with the imcomplete opencv bindings + numpy + scipy + matplotlib). Are there computer vision PhD/postgrad students here who are using only C++ (with all its availabe libraries including opencv) without even needing to resort to Matlab or python? In other words, given the current existing computer vision or machine learning libraries, is C++ alone sufficient for fast prototyping of ideas? If you're currently using Java or C# for your postgrad work, can you list down the reasons why they should be used and how they compare to other languages in terms of available libraries? What is the de facto vision/machine learning programming language and its associated libraries used in your university research group? Thanks in advance.

  Read the article

• What are the reasons why the CPU usage doesn’t go 100% with C# and APM?

  - by Martin

  I have an application which is CPU intensive. When the data is processed on a single thread, the CPU usage goes to 100% for many minutes. So the performance of the application appears to be bound by the CPU. I have multithreaded the logic of the application, which result in an increase of the overall performance. However, the CPU usage hardly goes above 30%-50%. I would expect the CPU (and the many cores) to go to 100% since I process many set of data at the same time. Below is a simplified example of the logic I use to start the threads. When I run this example, the CPU goes to 100% (on an 8/16 cores machine). However, my application which uses the same pattern doesn’t. public class DataExecutionContext { public int Counter { get; set; } // Arrays of data } static void Main(string[] args) { // Load data from the database into the context var contexts = new List<DataExecutionContext>(100); for (int i = 0; i < 100; i++) { contexts.Add(new DataExecutionContext()); } // Data loaded. Start to process. var latch = new CountdownEvent(contexts.Count); var processData = new Action<DataExecutionContext>(c => { // The thread doesn't access data from a DB, file, // network, etc. It reads and write data in RAM only // (in its context). for (int i = 0; i < 100000000; i++) c.Counter++; }); foreach (var context in contexts) { processData.BeginInvoke(context, new AsyncCallback(ar => { latch.Signal(); }), null); } latch.Wait(); } I have reduced the number of locks to the strict minimum (only the latch is locking). The best way I found was to create a context in which a thread can read/write in memory. Contexts are not shared among other threads. The threads can’t access the database, files or network. In other words, I profiled my application and I didn’t find any bottleneck. Why the CPU usage of my application doesn’t go about 50%? Is it the pattern I use? Should I create my own thread instead of using the .Net thread pool? Is there any gotchas? Is there any tool that you could recommend me to find my issue? Thanks!

  Read the article

• Comparing strings with user-created string class

  - by meepz

  Basically, I created my own string class, mystring.h and mystring.c. What I want to do is write a function that compares two "strings" and then returns 1 first word is larger than the second, the opposite if word 2 is larger than word 1, and 0 if the two words are equal. What I have so far is this: int compareto(void * S1, void * S2){ String s1 = (String S1); String s2 = (String S2); int i, cs1 = 0, cs2 = 0; //cs1 is count of s1, cs2 is count of s2 while(s1->c[i] != '\0'){ //basically, while there is a word if(s1->c[i] < s2->c[i]) // if string 1 char is less than string 2 char cs2++; //add to string 2 count else (s1->c[i] > s2->c[i]) //vice versa cs1++; i++; } for my return I basically have if(cs1>cs2){ return 1; } else if(cs2 > cs1){ return 2; } return 0; here is mystring.h typedef struct mystring { char * c; int length; int (*sLength)(void * s); char (*charAt)(void * s, int i); int (*compareTo)(void * s1, void * s2); struct mystring * (*concat)(void * s1, void * s2); struct mystring * (*subString)(void * s, int begin, int end); void (*printS)(void * s); } string_t; typedef string_t * String; This does what I want, but only for unspecified order. What I want to do is search through my linked list for the last name. Ex. I have two entries in my linked list, smith and jones; Jones will be output as greater than smith, but alphabetically it isnt. (I'm using this to remove student entries from a generic link list I created) Any suggestions, all of my google searches involve using the library, so I've had no luck)

  Read the article

• JQuery dialog momentairly displayed on page load

  - by Kevin Won

  I created a page that has a JQuery based dialog using the standard JQuery UI function. I do this with out of the box functionality of JQuery... nothing special at all. Here is my HTML for the dialog: <div id = "myDialog"> <!-- ... more html in here for the dialog --> </div> Then the JQuery called in javascript that transforms the <div> to a dialog: // pruned .js as an example of kicking up a JQuery dialog $('#myDialog').dialog({ autoOpen: false, title: 'Title here', modal: true } }); Again, plain-vanilla JQuery. So you start this wizard by clicking on a link on the parent page, and it then spawns a JQuery dialog which has a significant chunk of HTML that includes images, etc. As I continued developing this page, I started to notice that when I loaded the page in the browser that the <div> tags I was putting in that JQuery transforms into dialogs would very briefly be displayed. Then the page would act as expected. In other words, the dialog would not be hidden, it would be displayed briefly in-line in the page. Quite ugly and unprofessional looking! But after a split second, the page would render correctly and look just as I expected/wanted. Over time, as the page size grew, the time the page would remain incorrectly rendered grew. My guess is that the rendering engine of the browser is rendering the page as it is loading, then at the end it is kicking off the JQuery that will transform the <div> into a dialog. This JQuery function will then transform the simple <div> to a JQuery dialog and hide it (since I have the autoOpen property set to false). Some browsers <cough>IE</cough> display it longer than others. My large-ish dialog now causes the page to incorrectly render for about 1 second... YUCK! I came up with a resolution to this problem which works OK, but I'm wondering if someone knows of a better way.

  Read the article

• Form submit to target iframe only works once

  - by Pointy

  I'm having a really irritating problem doing something that I'm sure I've done before. The setup is this: There's a form which is submitted via a "click" handler on a button, though the submit is ultimately a simple call to the form's native submit() function. The form's target is an iframe, which is initially filled with an empty page (that is, its source object is an URL for an empty page). That is, the "target" attribute of the form is the same identifier (and yes, it's a valid identifier) as the "name" and "id" attributes of the iframe (and yes, it's unique) Now the goal of this setup is as follows: the form contains file upload fields. Should something be wrong with one of the files uploaded, the server will report back an error. If the error response (that is, the html page with a new copy of the form, along with appropriate error messages) were to be allowed to reload the original window, then the file input fields would be cleared. That's not good. Thus the form submits to the iframe, so that the response from the server can be a small page that knows it's in that hidden iframe, and knows to move the error messages up to the form. One more thing: the form itself is also in an iframe, as part of a popup modal dialog (like a jQuery UI dialog, only slightly different; same idea though). The setup works fine - on the first submit. In other words, if I supply nice happy files to upload, the server ships back the successful response, and the dialog is closed correctly. If I send a bogus file, the server responds with an error page that correctly copies its stuff up to the form page. On the second submit, however (like, if I fix the bogus file input field), the browser insists on sending the server response to a new browser tab. As far as I can tell, the form's "target" remains correct, the iframe "name" and "id" attributes aren't changed, and I even make sure to update the hidden iframe "window.name" and "window.id" values. None of that is helping; I always get a new browser tab. I'm trying to set up a slightly simpler test case to see if I can rule out some of my framework code (the stuff that does the submit), though via a few console.log() calls I think that stuff is OK; it's certainly OK on all the other dialogs etc. in the site. When/if I create a simpler version I'll post it. In the meantime, if any of you insanely smart people recognize this situation and know of a trick to make it work, I'd be really thankful. I see the same behavior in both Firefox (3.6) and Chrome, so it's got to be my problem and not a browser quirk (well, at least that's what I think to be true).

  Read the article

• Validate a string in a table in SQL Server - CLR function or T-SQL

  - by Ashish Gupta

  I need to check If a column value (string) in SQL server table starts with a small letter and can only contain '_', '-', numbers and alphabets. I know I can use a SQL server CLR function for that. However, I am trying to implement that validation using a scalar UDF and could make very little here...I can use 'NOT LIKE', but I am not sure how to make sure I validate the string irrespective of the order of characters or in other words write a pattern in SQL for this. Am I better off using a SQL CLR function? Any help will be appreciated.. Thanks in advance Thank you everyone for their comments. This morning, I chose to go CLR function way. For the purpose of what I was trying to achieve, I created one CLR function which does the validation of an input string and have that called from a SQL UDF and It works well. Just to measure the performance of t-SQL UDF using SQL CLR function vs t- SQL UDF, I created a SQL CLR function which will just check if the input string contains only small letters, it should return true else false and have that called from a UDF (IsLowerCaseCLR). After that I also created a regular t-SQL UDF(IsLowerCaseTSQL) which does the same thing using the 'NOT LIKE'. Then I created a table (Person) with columns Name(varchar) and IsValid(bit) columns and populate that with names to test. Data :- 1000 records with 'Ashish' as value for Name column 1000 records with 'ashish' as value for Name column then I ran the following :- UPDATE Person Set IsValid=1 WHERE dbo.IsLowerCaseTSQL (Name) Above updated 1000 records (with Isvalid=1) and took less than a second. I deleted all the data in the table and repopulated the same with same data. Then updated the same table using Sql CLR UDF (with Isvalid=1) and this took 3 seconds! If update happens for 5000 records, regular UDF takes 0 seconds compared to CLR UDF which takes 16 seconds! I am very less knowledgeable on t-SQL regular expression or I could have tested my actual more complex validation criteria. But I just wanted to know, even I could have written that, would that have been faster than the SQL CLR function considering the example above. Are we using SQL CLR because we can implement we can implement lot richer logic which would have been difficult otherwise If we write in regular SQL. Sorry for this long post. I just want to know from the experts. Please feel free to ask if you could not understand anything here. Thank you again for your time.

  Read the article

• DynamicQuery: How to select a column with linq query that takes parameters

  - by Richard77

  Hello, We want to set up a directory of all the organizations working with us. They are incredibly diverse (government, embassy, private companies, and organizations depending on them ). So, I've resolved to create 2 tables. Table 1 will treat all the organizations equally, i.e. it'll collect all the basic information (name, address, phone number, etc.). Table 2 will establish the hierarchy among all the organizations. For instance, Program for illiterate adults depends on the National Institute for Social Security which depends on the Labor Ministry. In the Hierarchy table, each column represents a level. So, for the example above, (i)Labor Ministry - Level1(column1), (ii)National Institute for Social Security - Level2(column2), (iii)Program for illiterate adults - Level3(column3). To attach an organization to an hierarchy, the user needs to go level by level(i.e. column by column). So, there will be at least 3 situations: If an adequate hierarchy exists for an organization(for instance, level1: US Embassy), that organization can be added (For instance, level2: USAID).-- US Embassy/USAID, and so on. How about if one or more levels are missing? - then they need to be added How about if the hierarchy need to be modified? -- not every thing need to be modified. I do not have any choice but working by level (i.e. column by column). I does not make sense to have all the levels in one form as the user need to navigate hierarchies to find the right one to attach an organization. Let's say, I have those queries in my repository (just that you get the idea). Query1 var orgHierarchy = (from orgH in db.Hierarchy select orgH.Level1).FirstOrDefault; Query2 var orgHierarchy = (from orgH in db.Hierarchy select orgH.Level2).FirstOrDefault; Query3, Query4, etc. The above queries are the same except for the property queried (level1, level2, level3, etc.) Question: Is there a general way of writing the above queries in one? So that the user can track an hierarchy level by level to attach an organization. In other words, not knowing in advance which column to query, I still need to be able to do so depending on some conditions. For instance, an organization X depends on Y. Knowing that Y is somewhere on the 3rd level, I'll go to the 4th level, linking X to Y. I need to select (not manually) a column with only one query that takes parameters. Thanks for helping

  Read the article

• Moose and error messages, the sun and the moon [closed]

  - by xxxxxxx

  So again using Moose I write a role like this: package My::Role; use Moose::Role; use Some::Class::Consuming::My::Role; With the note that Some::Class::Consuming::My::Role consumes the role My::Role; And what do I get ? I get an error message like this: A role generator is required to generate roles at /usr/local/share/perl/5.10.0/MooseX/Role/Parameterized/Meta/Role/Parameterizable.pm line 79 MooseX::Role::Parameterized::Meta::Role::Parameterizable::generate_role('MooseX::Role::Parameterized::Meta::Role::Parameterizable=HASH...', 'consumer', 'Moose::Meta::Class=HASH(0x894e540)', 'parameters', 'HASH(0x86fc1e0)') called at /usr/local/share/perl/5.10.0/MooseX/Role/Parameterized/Meta/Role/Parameterizable.pm line 116 MooseX::Role::Parameterized::Meta::Role::Parameterizable::apply('MooseX::Role::Parameterized::Meta::Role::Parameterizable=HASH...', 'Moose::Meta::Class=HASH(0x894e540)', 'element_type', 'Tuple') called at /usr/local/lib/perl/5.10.0/Moose/Util.pm line 132 Moose::Util::_apply_all_roles('Moose::Meta::Class=HASH(0x894e540)', undef, 'Stuff', 'HASH(0x894e1d0)') called at /usr/local/lib/perl/5.10.0/Moose/Util.pm line 86 Moose::Util::apply_all_roles('Moose::Meta::Class=HASH(0x894e540)', 'Stuff', 'HASH(0x894e1d0)') called at /usr/local/lib/perl/5.10.0/Moose.pm line 57 Moose::with('Moose::Meta::Class=HASH(0x894e540)', 'Group', 'HASH(0x894e1d0)') called at /usr/local/lib/perl/5.10.0/Moose/Exporter.pm line 293 Moose::with('Group', 'HASH(0x894e1d0)') called at Some_path_on_disk line 6 require Some_other_path_on_disk called at Some_path_on_disk line 9 Group::BEGIN() called at Yet_another_path_on_disk line 0 eval {...} called at Yet_another_path_on_disk line 0 Compilation failed in require at some_path_on_disk line 9. BEGIN failed--compilation aborted at some_path_on_disk line 9. What am I to make of this ? As Dijkstra would concisely describe, this looks like "just a meaningless concatenation of words"(which is exactly what it is). Would a more appropriate error message be "You cannot use a class consuming the role that you are currently defining " ? What does the error message try to convey ? Can the author make the error message meaningful ? Will he ever make it so ? maybe this can be planned for version 3.14159265358979323846 ? In actuality I get one and a half pages of error which is completely unreadable and devoid of any logic or sense of respect for the user that is using Moose (in terms of intuitive error messages) just like the one above. What's to be done in this case ? I mean I get on my screen these error messages that are sometimes completely unrelated to the problem that I'm having (which I can assess after solving the problems that probably caused them, I say probably becuase I have no idea where these error messages came from because they look like they fell from the sky as they have no relation to the actual situation). Is this: the inexplicable dramatic destiny of the Perl programmer using Moose ? someone being extremely lazy and sloppy at writing error messages ? maybe on heavy drugs ? me not understanding basic english ? Gentlemen, when writing software, please please please, take care of the poor programmer that will use it and respect him by writing relevant error messages. (Except for error messages Moose is a pretty good piece of software)

  Read the article

• Managed (.net) library with html-tidy like functionality?

  - by Eamon Nerbonne

  Does anybody know of an html cleaner for .NET that can parse html and (for instance) convert it to a more machine friendly format such as xhtml? I've tried the HTML Agility Pack, but that fails to correctly parse even fairly simple examples. To give an example of html that should be parsed correctly: <html><body> <ul><li>TestElem1 <li>TestElem2 <li>TestElem3 List: <ul><li>Nested1 <li>Nested2</li> <li>Nested3 </ul> <li>TestElem4 </ul> <p>paragraph 1 <p>paragraph 2 <p>paragraph 3 </body></html> li tags don't need to be closed (see spec), and neither do P tags. In other words, the above sample should be parsed as: <html><body> <ul><li>TestElem1</li> <li>TestElem2</li> <li>TestElem3 List: <ul><li>Nested1</li> <li>Nested2</li> <li>Nested3</li> </ul></li> <li>TestElem4</li> </ul> <p>paragraph 1</p> <p>paragraph 2</p> <p>paragraph 3</p> </body></html> Since the aim is to use the library on various machines, it's a big disadvantage to need to fall back to native code (such as a wrapper around html tidy) which would require extra deployment hassle and sacrifice platform independance. Any suggestions? To recap, I'm looking for: An html cleaner ala HTML tidy Must be able to deal with real world html, not just xhtml, at the very least correctly reading valid html 4 Must be able to convert to a more easily processable xml format Should be a purely managed app.

  Read the article

• DynamicMethod for ConstructorInfo.Invoke, what do I need to consider?

  - by Lasse V. Karlsen

  My question is this: If I'm going to build a DynamicMethod object, corresponding to a ConstructorInfo.Invoke call, what types of IL do I need to implement in order to cope with all (or most) types of arguments, when I can guarantee that the right type and number of arguments is going to be passed in before I make the call? Background I am on my 3rd iteration of my IoC container, and currently doing some profiling to figure out if there are any areas where I can easily shave off large amounts of time being used. One thing I noticed is that when resolving to a concrete type, ultimately I end up with a constructor being called, using ConstructorInfo.Invoke, passing in an array of arguments that I've worked out. What I noticed is that the invoke method has quite a bit of overhead, and I'm wondering if most of this is just different implementations of the same checks I do. For instance, due to the constructor matching code I have, to find a matching constructor for the predefined parameter names, types, and values that I have passed in, there's no way this particular invoke call will not end up with something it should be able to cope with, like the correct number of arguments, in the right order, of the right type, and with appropriate values. When doing a profiling session containing a million calls to my resolve method, and then replacing it with a DynamicMethod implementation that mimics the Invoke call, the profiling timings was like this: ConstructorInfo.Invoke: 1973ms DynamicMethod: 93ms This accounts for around 20% of the total runtime of this profiling application. In other words, by replacing the ConstructorInfo.Invoke call with a DynamicMethod that does the same, I am able to shave off 20% runtime when dealing with basic factory-scoped services (ie. all resolution calls end up with a constructor call). I think this is fairly substantial, and warrants a closer look at how much work it would be to build a stable DynamicMethod generator for constructors in this context. So, the dynamic method would take in an object array, and return the constructed object, and I already know the ConstructorInfo object in question. Therefore, it looks like the dynamic method would be made up of the following IL: l001: ldarg.0 ; the object array containing the arguments l002: ldc.i4.0 ; the index of the first argument l003: ldelem.ref ; get the value of the first argument l004: castclass T ; cast to the right type of argument (only if not "Object") (repeat l001-l004 for all parameters, l004 only for non-Object types, varying l002 constant from 0 and up for each index) l005: newobj ci ; call the constructor l006: ret Is there anything else I need to consider? Note that I'm aware that creating dynamic methods will probably not be available when running the application in "reduced access mode" (sometimes the brain just won't give up those terms), but in that case I can easily detect that and just calling the original constructor as before, with the overhead and all.

  Read the article

• Entrepreneur Needs Programmers, Architects, or Engineers?

  - by brand-newbie

  Hi guys (Ladies included). I posted on a related site, but THIS is the place to be. I want to build a specialized website. I am an entrepreneur and refining valuations now for venture capitalsists: i.e., determining how much cash I will need. I need help in understanding what human resources I need (i.e., Software Programmers, Architects, Engineers, etc.)??? Trust me, I have read most--if not all--of the threads here on the subject, and I can tell you I am no closer to the answer than ever. Here's my technology problem: The website will include (2) main components: a search engine (web crawler)...and a very large database. The search engine will not be a competitor to google, obviously; however, it "will" require bots to scour the web. The website will be, basically, a statistical database....where users should be able to pull up any statistic from "numerous" fields. Like any entrepreneur with a web-based vision, I'm "hoping" to get 100+ million registered users eventually. However, practically, we will start as small as feasible. As regards the technology (database architecture, servers, etc.), I do want quality, quality, quality. My priorities are speed, and the capaility to be scalable...so that if I "did" get globally large, we could do it without having to re-engineer anything. In other words, I want the back-end and the "infrastructure" to be scalable and professional....with emphasis on quality. I am not an IT professional. Although I've built several Joomla-based websites, I'm just a rookie who's only used minor javascript coding to modify a few plug-ins and components. The business I'm trying to create requires specialization and experts. I want to define the problem and let a capable team create the final product, and I will stay totally hands off. So who do you guys suggest I hire to run this thing? A software engineer? I was thinking I would need a "database engineer," a "systems security engineer", and maybe 2 or 3 "programmers" for the search engine. Also a web designer...and maybe a part-time graphic designer...everyone working under a single software engineer. What do you guys think? Who should I hire?...I REALLY need help from some people in the industry (YOU guys) on this. Is this project do-able in 6 months? If so, how many people will I need? Who exactly needs to head up this thing?...Senior software engineer, an embedded engineer, a CC++ engineer, a java engineer, a database engineer? And do I build this thing is Ruby or Java?

  Read the article

• How do I merge a transient entity with a session using Castle ActiveRecordMediator?

  - by Daniel T.

  I have a Store and a Product entity: public class Store { public Guid Id { get; set; } public int Version { get; set; } public ISet<Product> Products { get; set; } } public class Product { public Guid Id { get; set; } public int Version { get; set; } public Store ParentStore { get; set; } public string Name { get; set; } } In other words, I have a Store that can contain multiple Products in a bidirectional one-to-many relationship. I'm sending data back and forth between a web browser and a web service. The following steps emulates the communication between the two, using session-per-request. I first save a new instance of a Store: using (new SessionScope()) { // this is data from the browser var store = new Store { Id = Guid.Empty }; ActiveRecordMediator.SaveAndFlush(store); } Then I grab the store out of the DB, add a new product to it, and then save it: using (new SessionScope()) { // this is data from the browser var product = new Product { Id = Guid.Empty, Name = "Apples" }); var store = ActiveRecordLinq.AsQueryable<Store>().First(); store.Products.Add(product); ActiveRecordMediator.SaveAndFlush(store); } Up to this point, everything works well. Now I want to update the Product I just saved: using (new SessionScope()) { // data from browser var product = new Product { Id = Guid.Empty, Version = 1, Name = "Grapes" }; var store = ActiveRecordLinq.AsQueryable<Store>().First(); store.Products.Add(product); // throws exception on this call ActiveRecordMediator.SaveAndFlush(store); } When I try to update the product, I get the following exception: a different object with the same identifier value was already associated with the session: 00000000-0000-0000-0000-000000000000, of entity:Product" As I understand it, the problem is that when I get the Store out of the database, it also gets the Product that's associated with it. Both entities are persistent. Then I tried to save a transient Product (the one that has the updated info from the browser) that has the same ID as the one that's already associated with the session, and an exception is thrown. However, I don't know how to get around this problem. If I could get access to a NHibernate.ISession, I could call ISession.Merge() on it, but it doesn't look like ActiveRecordMediator has anything similar (SaveCopy threw the same exception). Does anyone know the solution? Any help would be greatly appreciated!

  Read the article

• Django: CharField with fixed length, how?

  - by Giovanni Di Milia

  Hi everybody, I wold like to have in my model a CharField with fixed length. In other words I want that only a specified length is valid. I tried to do something like volumenumber = models.CharField('Volume Number', max_length=4, min_length=4) but it gives me an error (it seems that I can use both max_length and min_length at the same time). Is there another quick way? Thanks EDIT: Following the suggestions of some people I will be a bit more specific: My model is this: class Volume(models.Model): vid = models.AutoField(primary_key=True) jid = models.ForeignKey(Journals, db_column='jid', null=True, verbose_name = "Journal") volumenumber = models.CharField('Volume Number') date_publication = models.CharField('Date of Publication', max_length=6, blank=True) class Meta: db_table = u'volume' verbose_name = "Volume" ordering = ['jid', 'volumenumber'] unique_together = ('jid', 'volumenumber') def __unicode__(self): return (str(self.jid) + ' - ' + str(self.volumenumber)) What I want is that the volumenumber must be exactly 4 characters. I.E. if someone insert '4b' django gives an error because it expects a string of 4 characters. So I tried with volumenumber = models.CharField('Volume Number', max_length=4, min_length=4) but it gives me this error: Validating models... Unhandled exception in thread started by <function inner_run at 0x70feb0> Traceback (most recent call last): File "/Library/Python/2.5/site-packages/django/core/management/commands/runserver.py", line 48, in inner_run self.validate(display_num_errors=True) File "/Library/Python/2.5/site-packages/django/core/management/base.py", line 249, in validate num_errors = get_validation_errors(s, app) File "/Library/Python/2.5/site-packages/django/core/management/validation.py", line 28, in get_validation_errors for (app_name, error) in get_app_errors().items(): File "/Library/Python/2.5/site-packages/django/db/models/loading.py", line 131, in get_app_errors self._populate() File "/Library/Python/2.5/site-packages/django/db/models/loading.py", line 58, in _populate self.load_app(app_name, True) File "/Library/Python/2.5/site-packages/django/db/models/loading.py", line 74, in load_app models = import_module('.models', app_name) File "/Library/Python/2.5/site-packages/django/utils/importlib.py", line 35, in import_module __import__(name) File "/Users/Giovanni/src/djangoTestSite/../djangoTestSite/journaldb/models.py", line 120, in <module> class Volume(models.Model): File "/Users/Giovanni/src/djangoTestSite/../djangoTestSite/journaldb/models.py", line 123, in Volume volumenumber = models.CharField('Volume Number', max_length=4, min_length=4) TypeError: __init__() got an unexpected keyword argument 'min_length' That obviously doesn't appear if I use only "max_length" OR "min_length". I read the documentation on the django web site and it seems that I'm right (I cannot use both together) so I'm asking if there is another way to solve the problem. Thanks again

  Read the article

• How to avoid using duplicate savepoint names in nested transactions in nested stored procs?

  - by Gary McGill

  I have a pattern that I almost always follow, where if I need to wrap up an operation in a transaction, I do this: BEGIN TRANSACTION SAVE TRANSACTION TX -- Stuff IF @error <> 0 ROLLBACK TRANSACTION TX COMMIT TRANSACTION That's served me well enough in the past, but after years of using this pattern (and copy-pasting the above code), I've suddenly discovered a flaw which comes as a complete shock. Quite often, I'll have a stored procedure calling other stored procedures, all of which use this same pattern. What I've discovered (to my cost) is that because I'm using the same savepoint name everywhere, I can get into a situation where my outer transaction is partially committed - precisely the opposite of the atomicity that I'm trying to achieve. I've put together an example that exhibits the problem. This is a single batch (no nested stored procs), and so it looks a little odd in that you probably wouldn't use the same savepoint name twice in the same batch, but my real-world scenario would be too confusing to post. CREATE TABLE Test (test INTEGER NOT NULL) BEGIN TRAN SAVE TRAN TX BEGIN TRAN SAVE TRAN TX INSERT INTO Test(test) VALUES (1) COMMIT TRAN TX BEGIN TRAN SAVE TRAN TX INSERT INTO Test(test) VALUES (2) COMMIT TRAN TX DELETE FROM Test ROLLBACK TRAN TX COMMIT TRAN TX SELECT * FROM Test DROP TABLE Test When I execute this, it lists one record, with value "1". In other words, even though I rolled back my outer transaction, a record was added to the table. What's happening is that the ROLLBACK TRANSACTION TX at the outer level is rolling back as far as the last SAVE TRANSACTION TX at the inner level. Now that I write this all out, I can see the logic behind it: the server is looking back through the log file, treating it as a linear stream of transactions; it doesn't understand the nesting/hierarchy implied by either the nesting of the transactions (or, in my real-world scenario, by the calls to other stored procedures). So, clearly, I need to start using unique savepoint names instead of blindly using "TX" everywhere. But - and this is where I finally get to the point - is there a way to do this in a copy-pastable way so that I can still use the same code everywhere? Can I auto-generate the savepoint name on the fly somehow? Is there a convention or best-practice for doing this sort of thing? It's not exactly hard to come up with a unique name every time you start a transaction (could base it off the SP name, or somesuch), but I do worry that eventually there would be a conflict - and you wouldn't know about it because rather than causing an error it just silently destroys your data... :-(

  Read the article

• NSInvalidArgumentException: Illegal attempt to establish a relationship between objects in different

  - by iPhoneDollaraire

  I have an app based on the CoreDataBooks example that uses an addingManagedObjectContext to add an Ingredient to a Cocktail in order to undo the entire add. The CocktailsDetailViewController in turn calls a BrandPickerViewController to (optionally) set a brand name for a given ingredient. Cocktail, Ingredient and Brand are all NSManagedObjects. Cocktail requires at least one Ingredient (baseLiquor) to be set, so I create it when the Cocktail is created. If I add the Cocktail in CocktailsAddViewController : CocktailsDetailViewController (merging into the Cocktail managed object context on save) without setting baseLiquor.brand, then it works to set the Brand from a picker (also stored in the Cocktails managed context) later from the CocktailsDetailViewController. However, if I try to set baseLiquor.brand in CocktailsAddViewController, I get: Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: 'Illegal attempt to establish a relationship 'brand' between objects in different contexts' From this question I understand that the issue is that Brand is stored in the app's managedObjectContext and the newly added Ingredient and Cocktail are stored in addingManagedObjectContext, and that passing the ObjectID instead would avoid the crash. What I don't get is how to implement the picker generically so that all of the Ingredients (baseLiquor, mixer, garnish, etc.) can be set during the add, as well as one-by-one from the CocktailsDetailViewController after the Cocktail has been created. In other words, following the CoreDataBooks example, where and when would the ObjectID be turned into the NSManagedObject from the parent MOC in both add and edit cases? -IPD UPDATE - Here's the code: - (IBAction)addCocktail:(id)sender { CocktailsAddViewController *addViewController = [[CocktailsAddViewController alloc] init]; addViewController.title = @"Add Cocktail"; addViewController.delegate = self; // Create a new managed object context for the new book -- set its persistent store coordinator to the same as that from the fetched results controller's context. NSManagedObjectContext *addingContext = [[NSManagedObjectContext alloc] init]; self.addingManagedObjectContext = addingContext; [addingContext release]; [addingManagedObjectContext setPersistentStoreCoordinator:[[fetchedResultsController managedObjectContext] persistentStoreCoordinator]]; Cocktail *newCocktail = (Cocktail *)[NSEntityDescription insertNewObjectForEntityForName:@"Cocktail" inManagedObjectContext:self.addingManagedObjectContext]; newCocktail.baseLiquor = (Ingredient *)[NSEntityDescription insertNewObjectForEntityForName:@"Ingredient" inManagedObjectContext:self.addingManagedObjectContext]; newCocktail.mixer = (Ingredient *)[NSEntityDescription insertNewObjectForEntityForName:@"Ingredient" inManagedObjectContext:self.addingManagedObjectContext]; newCocktail.volume = [NSNumber numberWithInt:0]; addViewController.cocktail = newCocktail; UINavigationController *navController = [[UINavigationController alloc] initWithRootViewController:addViewController]; [self.navigationController presentModalViewController:navController animated:YES]; [addViewController release]; [navController release]; }

  Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >