Search Results

Search found 5228 results on 210 pages for 'bash alias'.

Page 186/210 | < Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >

• Setting my NIC to full duplex

  - by David

  I am trying to optimize the network speed of my Solaris X86 server, and have discovered that the Cisco 3548 that it is connected to has issues with the NIC in my server. The NIC appears to have not been configured fully, and is coming up 100 half-duplex. The 3548 ports are all set to 100 full. Ideally I'd like to have the server set for 100 full, and have been attempting to configure it using ndd commands. However I have had no results. The following command: -bash-3.00# dladm show-dev rtls0 link: unknown speed: 100 Mbps duplex: unknown The NIC shows up as: pci bus 0x0001 cardnum 0x06 function 0x00: vendor 0x10ec device 0x8139 Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ which should be configurable. I have modified the configuration file from auto config (5) to 100 fdx (4) to no avail. If there is no other choice, I could alter the Cisco 3548 to be 100 half-duplex. However, this solution causes huge performance loss. Currently throughput is about 500Kbps, when it should be around 40Mbps.

  Read the article

• Advanced Linux file permission question (ownership change during write operation)

  - by Kent

  By default the umask is 0022: usera@cmp$ touch somefile; ls -l total 0 -rw-r--r-- 1 usera usera 0 2009-09-22 22:30 somefile The directory /home/shared/ is meant for shared files and should be owned by root and the shared group. Files created here by usern (any user) are automatically owned by the shared group. There is a cron-job taking care of changing owning user and owning group (of any moved files) once per day: usera@cmp$ cat /etc/cron.daily/sharedscript #!/bin/bash chown -R root:shared /home/shared/ chmod -R 770 /home/shared/ I was writing a really large file to the shared directory. It had me (usera) as owning user and the shared group as group owner. During the write operation the cron job was run, and I still had no problem completing the write process. You see. I thought this would happen: I am writing the file. The file permissions and ownership data for the file looks like this: -rw-r--r-- usera shared The cron job kicks in! The chown line is processed and now the file is owned by the root user and the shared group. As the owning group only has read access to the file I get a file write error! Boom! End of story. Why did the operation succeed? A link to some kind of reference documentation to back up the reason would be very welcome (as I could use it to study more details).

  Read the article

• Why are Microsoft Windows Update taking so long to install?

  - by Mathieu Pagé

  Hi, I have a question that is not related to a problem I have. Just something I'd like to understand. Why are Windows update so long? First Windows Update need to find witch updates you needs and this take about 5 minutes. What is happening behind the scene during those 5 minutes? I would have tought that it would be enough to compare the updates you already have to the complete list of updates or to check the version numbers of a couples files. Then when it comes time to install the upgrades, they're also taking a long time. Some 1 Mb updates takes 2, 3 or 5 minutes to install. What is taking so long. I would have though that it was simply a mater of backup the old file, uncompress the new files, replace the old file. This should be really fast. Is Windows doing something else? For comparison, under Linux, you can find which updates you need in about 20 seconds and installing them is usually pretty fast (The time to uncompress the files). I can do a complete updgrade of my linux machine in about 25 minutes (download 600-800 Mb of updates, hundreds of them and install them) while under windows 25 minutes is the time it needs to find witch update are needed and install about 5-10 updates. I just updated a Windows XP home from SP1a to SP3 + all other updates. It took me more than 3 hours. Doing something like that in the Linux World takes about 30 minutes. I don't want to bash Microsoft here. I genuinly want to know what they do differently that makes it so long.

  Read the article

• Procmail Postfix issue

  - by Blucreation

  Our server is using CENTOS uses postfix: Nov 1 11:31:52 webserver postfix/smtpd[30424]: 822A91872F: client=unknown[5.133.168.42], sasl_method=PLAIN, [email protected] Nov 1 11:31:52 webserver postfix/cleanup[30427]: 822A91872F: message-id=<[email protected]> Nov 1 11:31:52 webserver postfix/qmgr[1067]: 822A91872F: from=<[email protected]>, size=620, nrcpt=1 (queue active) Nov 1 11:31:52 webserver postfix/virtual[30505]: 822A91872F: to=<[email protected]>, relay=virtual, delay=0.12, delays=0.12/0/0/0, dsn=2.0.0, status=sent (delivered to maildir) Nov 1 11:31:52 webserver postfix/qmgr[1067]: 822A91872F: removed Nov 1 11:31:52 webserver postfix/smtpd[30424]: disconnect from unknown[5.133.168.42] I have this in my etc/postfix/main.cf: mailbox_command = /usr/bin/procmail -a "$EXTENSION" My etc/procmailrc contains: PATH="/usr/bin" SHELL="/bin/bash" LOGFILE="/var/log/procmail.log" VERBOSE="YES" LOG="#TEST#" I don't think procmail is picking up on my procmailrc as nothing ever gets logged from normal emails. If i type this: procmail DEFAULT=/dev/null VERBOSE=yes LOGFILE=/var/log/procmail.log /dev/null </dev/null I get entries in my log file so i know procmail is working Am i doing something wrong? am i missing something? I eventually want my rule to call a php script only if the subject contains "SUPPORT TICKET" and the to is "[email protected]" but that's once i this issue solved.

  Read the article

• Error when starting qpidd as a service

  - by Sparks

  I have recently swapped from CENTOS 5 to FEDORA 17. Previously I have created my own init.d scripts successfully (albeit not for qpidd) however, in FEDORA I cannot get it to work. I have created the following script (called qpidd) in the init.d directory: #!/bin/bash # # /etc/rc.d/init.d/qpidd # # QPID/AMQP Broker scripts # # # chkconfig: 2345 20 80 # description: QPID/AMQP Broker service # processname: qpidd # pidfile: /var/lock/subsys/qpidd # Source function library. . /etc/init.d/functions SERVICENAME=qpidd start() { echo -n "Starting $SERVICENAME: " daemon qpidd -d & retval=$? touch /var/lock/subsys/$SERVICENAME return $retval } stop() { echo -n "Shutting down $SERVICENAME: " qpidd -q & retval=$? rm -f /var/lock/subsys/$SERVICENAME return $retval } case "$1" in start) start ;; stop) stop ;; status) status qpidd ;; restart) stop start ;; condrestart) [ -f /var/lock/subsys/<service> ] && restart || : ;; *) echo "Usage: $SERVICENAME {start|stop|status|restart" exit 1 ;; esac exit $? After this, I ran chkconfig --add qpidd, however, now when I run sudo service qpidd start I get the following message: Starting qpidd (via systemctl): Job failed. See system journal and 'systemctl status' for details. If I then run systemctl status qpidd I get the following message: Failed to issue method call: Unit name qpidd is not valid. I am now lost, I have search the web and Stack Overflow but cannot find anybody with similar problem, any help or direction to a website that can help would be much appreciated Sparks :)

  Read the article

• Optimize shell and awk script

  - by bryan

  I am using a combination of a shell script, awk script and a find command to perform multiple text replacements in hundreds of files. The files sizes vary between a few hundred bytes and 20 kbytes. I am looking for a way to speed up this script. I am using cygwin. The shell script - #!/bin/bash if [ $# = 0 ]; then echo "Argument expected" exit 1 fi while [ $# -ge 1 ] do if [ ! -f $1 ]; then echo "No such file as $1" exit 1 fi awk -f ~/scripts/parse.awk $1 > ${1}.$$ if [ $? != 0 ]; then echo "Something went wrong with the script" rm ${1}.$$ exit 1 fi mv ${1}.$$ $1 shift done The awk script (simplified) - #! /usr/bin/awk -f /HHH.Web/{ if ( index($0,"Email") == 0) { sub(/HHH.Web/,"HHH.Web.Email"); } printf("%s\r\n",$0); next; } The command line find . -type f | xargs ~/scripts/run_parser.sh

  Read the article

• Millions of files in php's tmp error - how to delete?

  - by Jonatan Littke

  Hey. I've got a tmp-folder with 14 million php session files in my home directory. At least that's what I think it is, it's not like I could ls it or anything. How can I empty this folder? I've tried using find with the -exec rm {} \; commands but that didn't work. ls 'sess_0*' | xargs rm did neither. I'm currently running rm -rf tmp but after two hours the folder appears to be the same size. REFERENCE INFO: I suddenly encountered an error where SESSIONS could no longer be written to disk: [Mon Apr 19 19:58:32 2010] [warn] mod_fcgid: stderr: PHP Warning: Unknown: open(/var/www/clients/client1/web1/tmp/sess_8e12742b62aa68a3f9476ec80222bbfb, O_RDWR) failed: No space left on device (28) in Unknown on line 0 [Mon Apr 19 19:58:32 2010] [warn] mod_fcgid: stderr: PHP Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/var/www/clients/client1/web1/tmp) in Unknown on line 0 I ran: $ df -h Filesystem Size Used Avail Use% Mounted on /dev/md0 457G 126G 308G 29% / tmpfs 1.8G 0 1.8G 0% /lib/init/rw udev 10M 664K 9.4M 7% /dev tmpfs 1.8G 0 1.8G 0% /dev/shm But as you can see, the disk isn't full. So I had a look in the syslog which says the following 20 times per second: kernel: [19570794.361241] EXT3-fs warning (device md0): ext3_dx_add_entry: Directory index full! This led me thinking to a full folder, obviously, but since my web folder only has 60k files (having counted them), I guessed it was the tmp folder (the local one, for this instance of php) that messed things up. Some commands I ran: $ sudo ls sess_a* | xargs rm -f bash: /usr/bin/sudo: Argument list too long find . -exec rm {} \; rm: cannot remove directory '.' find: cannot fork: Cannot allocate memory I'm running Debian Lenny, php5, ISPConfig, SuEXEC and Fast-CGI.

  Read the article

• Backup solution, or, how Duplicati duped me

  - by blarghmaster

  TL/DR version: Mono + Duplicati.commandline.exe restore etc. etc. spits this out for several files regardless of what I try. I am able to list sets, list files in said sets, even do a verify, but each time i do a restore of any kind, i get errors to the effect of : Failed to restore file: "snapshot/blahblah/2005-11-07.tar.gz", Error message: The partial file record for snapshot/blahblah/2005-11-07.tar.gz does not match the file Any advice here, or an idea of where to look for a better solution? FULL STORY: Ive recently put together an nice clean, friendly backup solution for several servers, predominantly Linux, but occasionally a windows box is added too. The solution as is meets all my requirements and does it well... save 1: cross-compatibility The solution is based on a combination of several elements, but eventually comes done to using Duplicity and Duplicati for the actual storage of files. The entire solution was ready to go before i realized that Duplicati, does not, in fact allow me to restore my files to a Linux box, regardless of what the commandline under Mono might tell you. It just spits out errors on random zip and image files, for apparently no good reason as i have tried several options to get it to restore, and several versions of Mono including installing it pretty much lib-for-lib. There is no effective log file for the reasons for these errors, and even the "--debug-output=true" flag does nothing. I am able to list sets, list files in said sets, even do a verify, but each time i do a restore of any kind, i get errors to the effect of : Failed to restore file: "snapshot/blahblah/2005-11-07.tar.gz", Error message: The partial file record for snapshot/blahblah/2005-11-07.tar.gz does not match the file Now i could most likely use the friendly instructions on Duplicati's site and script a bash equivalent of the restore, but that's not exactly ideal. Any advice on this? or possibly an alternative solution that presents the same benefits of Duplicati/Duplicity but that actually works across platforms?

  Read the article

• Cannot connect to Solaris Server when Oracle GoldenGate process uses the port

  - by Abdallah Ghrb

  I'm trying to test the Oracle goldengate to replicate data between two databases on the same server. So I installed two databases and two goldengate homes in the same machine. The goldengate processes are started from each home and they are responsible for the replication : Process from home 1 configured on port 7809 & process for home 2 configured on port 7810. For a successful replication, processes started from goldengate home 1 should communicate with processes started from goldengate home 2. But for some reasons, this is not happening. The goldengate log file has the following error : OGG-01223 Oracle GoldenGate Capture for Oracle, exthrr.prm: TCP/IP error 131 (Connection reset by peer). "Googling" for this error, it said that the connection occurred but the host terminated it. Tried to telnet the machine with the used port and it gave the following error: bash-3.00$ telnet 10.10.3.124 7810 Trying 10.10.3.124... Connected to 10.10.3.124. Escape character is '^]'. Connection to 10.10.3.124 closed by foreign host. Here the communication occurs but for only around 3 seconds then it is closed by the host, which is the same explanation of the above error in the goldengate log file. I tried to change the port but still the same error. The problem is happening only when the goldengate process is using the port. When other process is using the same port, I can telnet successfully.

  Read the article

• Simultanious process mysteriously ending

  - by Matt

  I'm trying to run a large air quality model, written in FORTRAN, setup with bash scripts, and run in a work queue (slurm.) The first part of the modeling is to run an "entry" model, this runs with MPI in the work queue but only on one process. At one point in the logs, there's a mysterious FORTRAN STOP, and then later the model fails because something wasn't set up properly. This FORTRAN STOP isn't from the main process, which continues running. This is a huge model, but as far as I know there should not be any other processes running at the same time. It consistently fails at the exact same spot. (I can move it by adding debug, but the debug is in the main process) How can I determine what this process is? I've tried added a call to strace -feprocess $SHELL in the run script, but I'm new to this, so if it has offered any info, I haven't been able to use it yet. The is no trace output around the FORTRAN STOP. The whole process occurs so fast that I can't seem to observe it by using ps. Is there a way I can somehow monitor all the processes being initiated from the time the work queue starts? Or some other way I can figure out what is failing? This is running on CentOS 6.4, with Slurm, compiled with PGI 13.

  Read the article

• Need help with custom init script

  - by churnd

  I'm trying to set up an init script for a process on redhat linux: #!/bin/sh # # Startup script for Conquest # # chkconfig: 345 85 15 - start or stop process definition within the boot process # description: Conquest DICOM Server # processname: conquest # pidfile: /var/run/conquest.pid # Source function library. This creates the operating environment for the process to be started . /etc/rc.d/init.d/functions CONQ_DIR=/usr/local/conquest case "$1" in start) echo -n "Starting Conquest DICOM server: " cd $CONQ_DIR && daemon --user mruser ./dgate -v - Starts only one process of a given name. echo touch /var/lock/subsys/conquest ;; stop) echo -n "Shutting down Conquest DICOM server: " killproc conquest echo rm -f /var/lock/subsys/conquest rm -f /var/run/conquest.pid - Only if process generates this file ;; status) status conquest ;; restart) $0 stop $0 start ;; reload) echo -n "Reloading process-name: " killproc conquest -HUP echo ;; *) echo "Usage: $0 {start|stop|restart|reload|status}" exit 1 esac exit 0 However, the cd $CONQ_DIR is getting ignored, because the script errors out: # ./conquest start Starting Conquest DICOM server: -bash: ./dgate: No such file or directory [FAILED] For some reason, I have to run dgate as ./dgate. I cannot specify the full path /usr/local/conquest/dgate The software came with an init script for a Debian system, so the script uses start-stop-daemon, with the option --chdir to where dgate is, but I haven't found a way to do this with the Redhat daemon function.

  Read the article

• How to configure a shortcut for an SSH connection through a SSH tunnel

  - by Simone Carletti

  My company production servers (FOO, BAR...) are located behind two gateway servers (A, B). In order to connect to server FOO, I have to open a ssh connection with server A or B with my username JOHNDOE, then from A (or B) I can access any production server opening a SSH connection with a standard username (let's call it WEBBY). So, each time I have to do something like: ssh johndoe@a ... ssh webby@foo ... # now I can work on the server As you can imagine, this is a hassle when I need to use scp or if I need to quickly open multiple connections. I have configured a ssh key and also I'm using .ssh/config for some shortcuts. I was wondering if I can create some kind of ssh configuration in order to type ssh foo and let SSH open/forward all the connections for me. Is it possible? Edit womble's answer is exactly what I was looking for but it seems right now I can't use netcat because it's not installed on the gateway server. weppos:~ weppos$ ssh foo -vv OpenSSH_5.1p1, OpenSSL 0.9.7l 28 Sep 2006 debug1: Reading configuration data /Users/xyz/.ssh/config debug1: Applying options for foo debug1: Reading configuration data /etc/ssh_config debug2: ssh_connect: needpriv 0 debug1: Executing proxy command: exec ssh a nc -w 3 foo 22 debug1: permanently_drop_suid: 501 debug1: identity file /Users/xyz/.ssh/identity type -1 debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type 'Proc-Type:' debug2: key_type_from_name: unknown key type 'DEK-Info:' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /Users/xyz/.ssh/id_rsa type 1 debug2: key_type_from_name: unknown key type '-----BEGIN' debug2: key_type_from_name: unknown key type 'Proc-Type:' debug2: key_type_from_name: unknown key type 'DEK-Info:' debug2: key_type_from_name: unknown key type '-----END' debug1: identity file /Users/xyz/.ssh/id_dsa type 2 bash: nc: command not found ssh_exchange_identification: Connection closed by remote host

  Read the article

• Login with Enterprise Principal Name using sssd AD backend in Ubuntu 14.04 LTS

  - by Vinícius Ferrão

  I’m running sssd version 1.11 with the AD backend in Ubuntu 14.04 LTS (1.11.5-1ubuntu3) to authenticate users from Active Directory running on Windows Server 2012 R2, and I’m trying to achieve logins with the User Principal Name for all users of the domain. But the UPN are always Enterprise Principal Names. Let-me illustrate the problem with my user account: Domain: local.example.com sAMAccountName: ferrao UPN: [email protected] (there’s no local in the UPN) I can successfully login with the sAMAccountName atribute, which is fine, but I can’t login with [email protected] which is my UPN. The optimum solution for me is to allow logins from sAMAccountName and the UPN (User Principal Name). If’s not possible, the UPN should be the right way instead of the sAMAccountName. Another annoyance is the homedir pattern with those options in sssd.conf: default_shell = /bin/bash fallback_homedir = /home/%d/%u What I would like to achieve is separated home directories from the EPN. For example: /home/example.com/user /home/whatever.example.com/user But with this pattern I can’t map the way I would like to do. I’ve looked through man pages and was unable to find any answers for this issues. Thanks,

  Read the article

• Can MS Services for Unix be deployed and accessed from a shared drive?

  - by Ian C.

  I'm interested in experimenting with replacing our dependency on MKS with MS' Sevices for Unix toolset. I was wondering if anyone has any experience with deploying SFU on a shared drive? We like to, wherever possible, host our dev tools on one central NAS and call to the NAS to access the tools instead of rolling stuff out to each and every desktop. I'm not interested in the NFS support or ActiveState Perl. Really, none of the daemon technology is required here. I'm looking for replacements for the coreutils/binutils stuff you find in Linux (and MKS on Windows): sed, awk, csh, bash, grep, ls, find -- the meat-and-potates command line apps that our build and test scripts are built around. If I limit the install to just the Interix GNU Components (and maybe the Remote Connectivity components) will is run nicely from a shared location? To head off some questions: Yes, I've looked at Cygwin. Unfortunately it's performance in our build and test environment is poor. It runs considerably slower than MKS and it's not a direct drop-in replacement for MKS (thanks to its internal pathing and limitations with commands like 'ps'), so it's a tougher sell. Yes, I'm looking at the MinGW offering in parallel to this.

  Read the article

• Kickstart CentOS 6 prompting for TCP/IP with network set to DHCP

  - by Andy Shinn

  I am trying to stop my kickstart CentOS install prompting me for TCP/IP information. After I click through this prompt (keeping IPv4 and IPv6 to their defaults) the installation continues and completes just fine. Below is my kickstart file: # Andy's super awesome VM kickstart file install url --url=http://mirrors.kernel.org/centos/6/os/x86_64 lang en_US.UTF-8 keyboard us text %include /tmp/network.ks rootpw --iscrypted $6$RA8DyrNTsVJkGIgY$ohZ62HHiOjNnn1yDMZlIu3lQ63D3plGPcbVZtPKE8Oq6Z.IGUgN.kNLkxs/ZymZuluRDWsW2eey5zLOl2G3mp. firewall --service=ssh authconfig --enableshadow --passalgo=sha512 selinux --disabled timezone America/Los_Angeles bootloader --location=mbr --driveorder=vda --append="crashkernel=auto rhgb quiet" # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work zerombr clearpart --all --drives=vda --initlabel part /boot --fstype=ext4 --size=500 part pv.253002 --grow --size=1 volgroup vg1 --pesize=4096 pv.253002 logvol / --fstype=ext4 --name=lv_root --vgname=vg1 --grow --size=1024 --maxsize=51200 logvol swap --name=lv_swap --vgname=vg1 --grow --size=4032 --maxsize=4032 repo --name="CentOS" --baseurl=http://mirrors.kernel.org/centos/6/os/x86_64 --cost=100 repo --name="Puppet Labs Products" --baseurl=http://yum.puppetlabs.com/el/6/products/x86_64 repo --name="Puppet Labs Dependencies" --baseurl=http://yum.puppetlabs.com/el/6/dependencies/x86_64 repo --name="EyeFi" --baseurl=http://flexo.eye.fi/6/eye-fi-api %packages @core @server-policy puppet facter %end %pre --erroronfail #!/bin/bash for x in `cat /proc/cmdline`; do case $x in SERVERNAME*) eval $x echo "network --onboot yes --device eth0 --bootproto dhcp --hostname ${SERVERNAME}.eye.fi" /tmp/network.ks ;; esac; done %end %post puppet agent --waitforcert 10 --onetime --no-daemon --pluginsync --server puppet.eye.fi %end reboot My kernel arguments are in this following virt-install command that I use to start the install: virt-install -n zabbix -r 2048 --vcpus=2 -l http://mirrors.kernel.org/centos/6/os/x86_64 --disk /dev/vg_inf1/zabbix --network bridge=br85 --initrd-inject=/home/ashinn/vm_kickstart --extra-args "ks=file:/vm_kickstart SERVERNAME=zabbix" --autostart During the install, I can pull up a console on the second terminal and verify the contents of /tmp/network.ks are: network --onboot=yes --bootproto=dhcp --ipv6=auto --hostname=jenkins2.mydomain.com Why might Anaconda be prompting for the TCP/IP settings when they are already set to DHCP?

  Read the article

• mysql command line not working

  - by Sandeepan Nath

  I have mysql running in my fedora system. I have xampp setup on the system and php projects present in the webspace are working fine. PhpMyAdmin is working fine. echoing phpinfo() in a PHP script also shows mysql enabled. But running mysql connect command mysql -u[username] -p[password] Gives this - bash: mysql: command not found How do I fix that? Any pointers? I guess I need to do some pointing (define some path in some file) so that my system knows that mysql is installed. What exactly do I have to do? Additional Details This system was someone else's and he is not available here. May be PHP/Mysql was setup already in the system. I just freshly extracted xampp for linux into /opt/lampp/ and have put all the above mentioned things (PHP projects and PhpMyAdmin) there. After doing that I had a socket problem (PhpMyAdmin was not working and showing this)- #2002 - The server is not responding (or the local MySQL server's socket is not correctly configured) I restarted lampp using ./lampp restart but problem remained. Then after turning on system today, I started lampp and everything worked just fine. No project issues anymore only command line Mysql not working

  Read the article

• Ubuntu init.d script not being called on startup

  - by Mike

  I've got a script in ubuntu 9.04 in init.d that I've set to run on start on with update-rc.d using update-rc.d init_test defaults 99. All of the symlinks are there and the permissions appear to be correct -rwxr-xr-x 1 root root 642 2010-10-28 16:44 init_test mike@xxxxxxxxxx:~$ find /etc -name S99* | grep init_test find: /etc/rc5.d/S99init_test find: /etc/rc4.d/S99init_test find: /etc/rc2.d/S99init_test find: /etc/rc3.d/S99init_test The script runs through source and ./ without issue and behaves correctly. Here is the source of the script: #!/bin/bash ### BEGIN INIT INFO # Provides: init test script # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start daemon at boot time # Description: Enable service provided by daemon. ### END INIT INFO start() { echo "hi" echo "start called" >> /tmp/test.log return } stop() { echo "Stopping" } echo "Script called" >> /tmp/test.log case "$1" in start) start ;; stop) stop ;; *) echo "Usage: {start|stop|restart}" exit 1 ;; esac exit $? When the machine starts, I don't see "script called" or "start called" in the test.log at all. Is there anything obvious I'm messing up?

  Read the article

• Get the desktop/viewport of a window in enlightenment?

  - by Zorf

  Okay, so, given a XID of a window I need to get its desktop or viewport as well as the currently active one. Enlightenment does not seem to properly respond to wmctrl which leads to: ***@note:~ > wmctrl -lG 0x01e00002 -1 21 395 310 146 note Conky (note) # it places conkey wndows on -1 for some reason? 0x01c00002 -1 65 655 230 158 note Conky (note) 0x01a00002 -1 25 215 230 182 note Conky (note) 0x01800002 -1 25 550 310 110 note Conky (note) 0x01600002 -1 685 145 230 120 note Conky (note) 0x01400002 -1 1120 245 280 206 note Conky (note) 0x01200002 -1 1095 35 230 186 note Conky (note) 0x01000002 -1 1145 470 250 266 note Conky (note) 0x00c00002 -1 40 34 230 182 note Conky (note) 0x00e00029 0 0 0 1440 900 note ~ : bash – Konsole # desktop 2, fullscreen 0x03a00060 0 505 231 899 642 note Downloads – 'Dolphin' # destkop 0 0x0480001a 0 206 222 958 526 note Lifelover - Kärlek - becksvart melankoli #desk 2 0x034000e6 0 116 32 984 767 note clemctrl – Kate #desk 0 0x02c01b78 0 309 314 549 520 note ************* # desk 1 0x04e00062 0 104 31 990 619 note XChat: *** @ Free / #*** (+Ccnt) #desk 1 0x05c00112 0 22 35 1396 834 note StarCraft on Reddit - Chromium #desk 3 0x02c0f292 0 453 356 549 520 note *** #desk 1 0x02c000c0 0 860 216 557 645 note Buddy List # desk 1 As can be seen, all windows are on desk 0 in wmctrl except conky windows. Furthermore the geometry-viewport trick also doesn't seem to work that works in some wm's, are there any other tricks to get on which viewport/desktop a window is? There has to be some way to get it right?

  Read the article

• init.d script runs correctly but process doesn't live when booted fully up

  - by thetrompf

  I have a problem with an init.d script #!/bin/bash ES_HOME="/var/es/current" PID=$(ps ax | grep elasticsearch | grep $ES_HOME | grep -v grep | awk '{print $1}') #echo $PID #exit 0 case "$1" in start) if [ -z "$PID" ]; then echo "Starting Elasticsearch" echo "Starting Elasticsearch" /var/tmp/elasticsearch su -m elasticsearch -c "${ES_HOME}/bin/elasticsearch" exit 0; else echo "Elasticsearch already running" echo "Elasticsearch already running" /var/tmp/elasticsearch exit 0; fi ;; stop) if [ -n "$PID" ]; then echo "Stopping Elasticsearch" kill ${PID} echo "Stopped Elasticsearch" exit 0; else echo "Elasticsearch is not running" exit 0; fi ;; esac The scripts runs just file, as I can see in /var/tmp/elasticsearch a new line is added after every boot, but if I run: /etc/init.d/elasticsearch stop Just after the server is booted, I get "Elasticsearch is not running", ergo somehow the process does not stay alive. My question is why? and what am I doing wrong? Thanks in advance.

  Read the article

• Mongrel Cluster on Ubuntu Server Karmic

  - by trobrock

  I am trying to get mongrel cluster working on my Ubuntu Server Karmic box in preparation to setup Capistrano. I've been trying to get the two to work all day and finally decided to completely remove Capistrano and see if I can just get Mongrel Cluster to work. I ran this to install mongrel cluster: gem install mongrel mongrel_cluster Everything installed fine, when I change into my app's directory... # mongrel_rails -bash: mongrel_rails: command not found I can run it from its install location: # /var/lib/gems/1.8/bin/mongrel_rails Usage: mongrel_rails <command> [options] Available commands are: ... It lets me build the cluster configuration file fine, but when I run the clister:start command: # /var/lib/gems/1.8/bin/mongrel_rails cluster::start starting port 8000 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31: command not found: mongrel_rails start -d -e production -p 8000 -P tmp/pids/mongrel.8000.pid -l log/mongrel.8000.log starting port 8001 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31: command not found: mongrel_rails start -d -e production -p 8001 -P tmp/pids/mongrel.8001.pid -l log/mongrel.8001.log starting port 8002 /usr/lib/ruby/1.8/rubygems/custom_require.rb:31: command not found: mongrel_rails start -d -e production -p 8002 -P tmp/pids/mongrel.8002.pid -l log/mongrel.8002.log It seems it isnt calling it from the right directory after that command, what can I do to fix this? I tried setting the path previously when trying to set up Capistrano, but the path didnt stay set when Capistrano used ssh to run the commands.

  Read the article

• Apache 2.2 + mod_fcgid + PHP 5.4: (104) Connection reset by peer

  - by Michele Piccirillo

  On a Debian 6 VPS, I'm running PHP 5.4 via mod_fcgid on a couple of different virtual hosts, managed by Virtualmin GPL. At random, I get 500 Internal Server Errors; restarting Apache brings everything back to normality. Examining the logs, I find messages of this kind: [Thu Oct 04 15:39:35 2012] [warn] [client 173.252.100.117] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Thu Oct 04 15:39:35 2012] [error] [client 173.252.100.117] Premature end of script headers: index.php Any ideas about what is happening? UPDATE: I found a similar question and the author reported to have solved the problem disabling APC. I tried following the advice, but I'm still getting the same errors. VirtualHost configuration SuexecUserGroup "#1000" "#1000" ServerName example.com DocumentRoot /home/example/public_html ScriptAlias /cgi-bin/ /home/example/cgi-bin/ DirectoryIndex index.html index.htm index.php index.php4 index.php5 <Directory /home/example/public_html> Options -Indexes +IncludesNOEXEC +FollowSymLinks +ExecCGI allow from all AllowOverride All AddHandler fcgid-script .php AddHandler fcgid-script .php5 FCGIWrapper /home/example/fcgi-bin/php5.fcgi .php FCGIWrapper /home/example/fcgi-bin/php5.fcgi .php5 </Directory> <Directory /home/example/cgi-bin> allow from all </Directory> RemoveHandler .php RemoveHandler .php5 IPCCommTimeout 61 FcgidMaxRequestLen 1073741824 php5.fcgi #!/bin/bash PHPRC=$PWD/../etc/php5 export PHPRC umask 022 export PHP_FCGI_CHILDREN PHP_FCGI_MAX_REQUESTS=99999 export PHP_FCGI_MAX_REQUESTS SCRIPT_FILENAME=$PATH_TRANSLATED export SCRIPT_FILENAME exec /usr/bin/php5-cgi Package versions webmin-virtual-server/virtualmin-universal 3.94.gpl-2 apache2/squeeze 2.2.16-6+squeeze8 libapache2-mod-fcgid/squeeze 1:2.3.6-1+squeeze1 php5 5.4.7-1~dotdeb.0 php5-apc 5.4.7-1~dotdeb.0

  Read the article

• Scriptable BitTorrent clients?

  - by James McMahon

  In an effort further automate all the little computer house keeping tasks that can waste my time I am looking into BitTorrent clients that have the ability to script common tasks. I've done some Googling and it looks like Transmission might have some of said such capabilities, but there site wasn't very clear on the details. Things I am looking to do; Prioritize and label torrents based on trackers Set seed length based on trackers and filesize Set additional seed time when a torrent's seed time expires based on a number of factors, like time spent seeding, remaining disk space and ratio. Move torrents to appropriate places post seeding based on labels and tracker Basically, while I could Python or Bash script things like moving torrents around and other simple actions, I need away to talk to the client to figure out things like the torrent seed time, tracker, labels, filesize, etc. Is there any client out there that would allow me to all or a subset these actions? I have access to Linux, Mac and Windows and am not tied to any particular torrent client. I am a programmer so I have no problems writing scripts, but examples of torrent scripting would also be helpful.

  Read the article

• Force Juniper-network client to use split routing

  - by craibuc

  I'm using the Juniper client for OSX ('Network Connect') to access a client's VPN. It appears that the client is configured to not use split-routing. The client's VPN host is not willing to enable split-routing. Is there a way for me to over-ride this configuration or do sometime on my workstation to get the non-client network traffic to by-pass the VPN? This wouldn't be a big deal, but none of my streaming radio stations (e.g. XM) work will connected to their VPN. Apologies for any inaccuracies in the terminology. ** edit ** The Juniper client changes my system's resolve.conf file from: nameserver 192.168.0.1 to: search XXX.com [redacted] nameserver 10.30.16.140 nameserver 10.30.8.140 I've attempted to restore my preferred DNS entry to the file $ sudo echo "nameserver 192.168.0.1" >> /etc/resolv.conf but this results in the following error: -bash: /etc/resolv.conf: Permission denied How does the super-user account not have access to this file? Is there a way to prevent the Juniper client from making changes to this file?

  Read the article

• Can't pin modified shortcuts to the Windows 7 task bar

  - by Coder

  I have a shortcut to a .bat file which I pin to the task bar using a workaround by using another icon and this seems to work. Now I make a copy of that shortcut, point it to a different .bat file, rename it, and I can't pin this one to the task bar. I have to find some other new unused icon to pin, pin it, then modify it manually. The other problem this causes is that windows seems to track which icons were pinned even if they are modified after the fact. As such, if I use media player as my dummy icon, pin it, then alter it's name and shortcut to point to a .bat file, I can't re-pin windows media player and if I select unpin from the windows media player, it unpins my shortcut to my .bat file. I can't believe how ridiculous this is. Is there a way to pin anything I want to the taskbar (ie. .bat file in my case) that does not cause problems like this? Is there an easy way I can copy an existing shortcut and modify it and re-pin it to the taskbar? The reason I want to copy it is because I start a .bat file (in particular git bash) and I set properties on the window like quick edit, increase the screen buffer and set it's position and size manually. I don't want to have to do this to every single icon I want to pin since they will be identical aside from the shortcut url.

  Read the article

• How can I both pipe and display output in Windows' command line?

  - by Bob

  I have a process I need to run within a batch file. This process produces some output. I need to both display this output to the screen and send (pipe) it to another program. The bash method uses tee: echo 'ee' | tee /dev/tty | foo Is there an equivalent for Windows? I am happy to use PowerShell if necessary. There are tee ports for Windows, but there does not appear to be an equivalent for /dev/tty, which complicates matters. The specific use-case here: I have a program (launch4j) that I need to run, displaying output to the user. At the same time, I need to be able to detect success or failure in the script. Unfortunately, this program does not set an exit code, and I cannot force it to do so. My current workaround involves piping to find, to search the output (launch4j config.xml | find "Successfully created") - however, that swallows the output I need to display. Therefore, I need some way to both display to the screen and send the ouput to a command - and this command should be able to set ERRORLEVEL (it cannot run asynchronously).

  Read the article

< Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >