Search Results

Search found 12371 results on 495 pages for 'ok'.

Page 186/495 | < Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >

• Can Autodesk Flame run with an nVidia Quadro FX3800 SDI and output to preview through SDI???

  - by cragno

  I am running on Linux RHEL 4.3, DKU 5.0.1. Everything seems to be ok on the xorg.conf and init.cfg, but when I start my projects and Flame enables output to preview I start having preview on my SDI monitor and stop seeing on my main monitor (which is connected to the DisplayPort). Could it be posible that Flame needs Quadro FX4x00/5x00 series with dual DVI to output both monitors?? Cause the FX3800 has only one DVi (which is connected to the SDI card) and 2 DisplayPorts as additional output monitors. Anyone knows a config or workaround this problem?? Thanks ahead!!!

  Read the article

• Trick to enabling FTP upload from an app in Windows 8?

  - by Craig

  I have an older Win32 app that uses FTP to upload some data to a server from time to time. This app works great in Windows XP and has been working fine in Windows 7 and Vista. For some reason, when running under Windows 8 it has trouble uploading its data. It appears to connect and upload the data OK but it has times out when disconnecting. The data does not appear on the server. I have limited visibility into the app while it's running so sorry for the vague nature of the description. My question is: Is there some security setting in Windows 8 that would keep this app from using FTP? When I check the settings it looks to me like I have it set up to prompt me about any permissions problems it might have, and I'm not seeing any prompts. I've tried running this app in XP/SP3 compatibility mode with no luck. At this point I'm just looking for some clues as to where to look.

  Read the article

• Areca 1880ix RAID hangs

  - by Dave

  Areca RAID controller ARC-1880ix-12 (firmware 1.50) hangs when on high load. My setup is: Chenbro 3U chassis Intel S5500BC mainboard Xeon 5603 CPU 16GB of RAM 12 Seagate SAS drives ST32000645SS (2 of them as hot spare, 10 as RAID10) Mellanox Infiniband HBA card This server is working as external infiniband storage for Xen VMs. When load is quite big Areca's firmware hangs - it becomes unreachable even from Areca's ethernet adapter. After resetting the server power it returns to normal operation. While Areca is hanged I can confirm that it is powered (ethernet link is active) and Infiniband HBA works Ok. Thanks in advance for any idea or suggestion where the problem might be!

  Read the article

• My server won't send emails

  - by Tomcomm

  I've been sent here by the people at stackoverflow OK so I know I'm using the right code becuase I have it working on another server but when I try to send an email from a webpage on this particular server using php I get a success message back but the email never gets through. In /var/log/maillog I see Sep 11 14:20:28 ela1 postfix/smtp[11496]: CEE83E151FD: to=[My email address here], relay=none, delay=40, delays=0.08/0.01/40/0, dsn=4.4.3, status=deferred (Host or domain name not found. Name service error for name=btopenworld.co.uk type=MX: Host not found, try again) Can anyone help?

  Read the article

• HAPROXY per domain redirection

  - by SecondThought

  I'm trying to redirect requests to my load balancer by domain name with acl and hdr_dom, to a separate backend. The redirection works ok with the first request - 'GET /' (the destination server is a WordPress site) but when the client asks for the assets ('GET /blablabla/style.css' for example) the haproxy doesn't redirect it to the right backend anymore, but to the default one, with . In the haproxy log I can see the correct host that the request is for (the one that I defined in hdr_dom) but it's like that since the GET request itself is relative (I mean not containing the domain but only from the /blablabla and forth), haproxy doesn't recognize it with the hdr_dom. I'm just guessing here.. Please help...

  Read the article

• Resizing partition in Windows 7: how long does it take?

  - by PaulJ

  Okay, maybe this is me worrying about nothing, but... I have a 500 Gb. external drive where I want to create a second partition. I plug it into my Windows 7 box, use Disk Manager and pick the "Shrink Volume" option. It says that the maximum amount to shrink is around 150 Gb. I hit "OK" and it starts working... and it's been going on for about half an hour. The light of the external HD is constantly working. Disk Manager is greyed out and has the "does not respond" message on the top bar; basically, it's behaving as a non-responding application. Is this normal for a drive of this size, or did the application hang? How long would it typically take for a drive like this to resize its partition?

  Read the article

• "Installing" GD for PHP

  - by gbuckingham89

  I'm new to server admin & Linux and have just got a VPS running CentOS 6. Apache, MySQL and PHP all came installed (along with cPanel and WHM), however I'm now also trying to install the GD library. I've run "yum install php-gd" and it installed ok. If I run it again I get "Package php-gd-5.3.2-6.el6_0.1.x86_64 already installed and latest version". However, when I do a phpinfo() or from the command line "php -m" there is no mention of GD. Is there anything else I need to do?

  Read the article

• Monitoring host and app parameters in real-time

  - by devopsdude42

  I have a bunch of VMs that I need to monitor in real-time. For all nodes I need to watch host parameters like load, network usage and free memory; and for some I need app-specific metrics too, like redis (some vars from the output of INFO command) and nginx (like requests/sec, avg. request time). Ideally I'd also like to track some parameters from the custom apps that run on these node too. These parameters should get tracked as a bunch of line charts on a dashboard. I checked out graphite and it looks suitable (although the UX and aesthetics looks like it needs some love). But setting up and maintaining graphite looks to be a pain, esp. since we don't have a full-time person just for this. Are there any alternatives? Or at least something that is simpler to setup and will scale? Reasonable paid services are also ok.

  Read the article

• "PHP Error" when running PHPUnit tests from within Komodo IDE.

  - by Pheter

  I am using the latest version of the Komodo IDE, PEAR and PHPUnit with PHP version 5.3.0. When I run the unit tests for my Komodo project the tests run correctly, but regardless of whether there are any tests to run or not I get shown the error: --------------------------- PHP Error --------------------------- parse error in Unknown on line 7 --------------------------- OK --------------------------- Everything works fine despite this error but it is irritating to see every time I run my tests. Furthermore, running the unit tests from the command line does not trigger any kind of error, suggesting that this is a problem with Komodo. How can I fix the error or, at the very least, stop it from showing up.

  Read the article

• Windows XP screen chopped off

  - by msindle

  Ok this one has be confused as all get out! One of the teachers at the school I support has a dell latitude e5500 and the desktop shows about 3/4 just fine, but the right 1/4th shows whatever was on the last (like its not refreshing (yes I tried refreshing the screen)) For example if I open up internet explorer then minimize it the left 3/4ths minimizes, but the right 1/4th stays pulled up. Another interesting piece of information is that if I change it to God awful 800x600 it works perfectly fine. The sceen works together and has no problems.... The only way I have found to get rid of this is to reload the laptop and that is getting old quick! Thanks for your help! Msindle

  Read the article

• Need to Extend Volume

  - by Roger Galindo

  Ok Here is where I am... I have an HP Proliant with 8 Drives configured as RAID5, and C:\Drive Disk 0 and D:\ drive Disk 1. I need to add more space to Disk 0 (C:) and have 150GB available on Disk 1 (D:). I tested the Disk Mgmt on D:\ and freed up 4GB which now shows to be Unallocated. How do I add the 4GB of Unallocated to the c:\? When I click on C:\ the Menu shows "Extend Volume" as Grayed Out not Black but the D:\ Drive shows Extend Volume as selectable/black.

  Read the article

• Dynamic VPN tunneling technologies

  - by Adam

  Ok, so I'm asking a more specific question this time. I'm writing a paper about Cisco's DMVPN and one of the tasks I have is to make the analysis of available network solutions which use dynamic VPN tunnels. Because the paper is about DMVPN, I have to compare those solutions to it. I know there are a lot of dynamic tunneling technologies but I'm looking for ones that can be compared to DMVPN. So the question is: are there any technologies which use dynamic VPN tunnels (not necessarily using crypto) that can be compared to DMVPN? What are those technologies?

  Read the article

• How can I install VLC on RHEL 6.3?

  - by holddame

  I'm having a problem installing VLC on Red hat 6.3 When I try to use yum install vlc all goes well until it shows me this in the end: Error: Package: vlc-2.0.3-6.el6.x86_64 (linuxtech-release) Requires: libminizip.so.1()(64bit) Error: Package: liblrdf-0.5.0-2.el6.x86_64 (linuxtech-release) Requires: ladspa Error: Package: libffado-2.1.0-0.8.20120325.svn2088.el6.x86_64 (linuxtech-release) Requires: libconfig++.so.8()(64bit) also I can't use yum update I'm running on a 32-bit processor and I don't know what's wrong. ok I'v installed live555 and tried again nothing really happened here is my yum whatprovides *BasicUsageEnviroment `live555-devel-0-0.34.2012.01.25.el6.x86_64 : Development files for live555.com streaming : libraries Repo : linuxtech-release Matched from: Filename : /usr/include/BasicUsageEnvironment live555-devel-0-0.34.2012.01.25.el6.i686 : Development files for live555.com streaming : libraries Repo : linuxtech-release Matched from: Filename : /usr/include/BasicUsageEnvironment live555-devel-0-0.27.2010.04.09.el6.rf.x86_64 : Development files for live555.com streaming : libraries Repo : rpmforge Matched from: Filename : /usr/include/BasicUsageEnvironment live555-devel-0-0.27.2012.02.04.el6.rf.x86_64 : Development files for live555.com streaming : libraries Repo : rpmforge Matched from: Filename : /usr/include/BasicUsageEnvironment

  Read the article

• IIS: Content-Length 0 for CSS, Javascript and Images

  - by Adrian Grigore

  After a clean re-installation of my Windows 7 system, I can't get IIS 7 to properly deliver any static content. Dynmic content (ASPX pages and content served by ASP.NET MVC controllers) works fine, but static files such as CSS, Javascript and Images give me a 200 OK status code and a Content-Length of 0. The problem occurs with all web sites on my server, even a brandnew ASP:NET MVC template project with no changes. It also occurs with both Firefox and IE 8. What could possibly be the problem? Note that I also installed the latest Windows Azure SDK, perhaps that messed up some settings. But I don't know how to proceed with for troubleshooting this.

  Read the article

• DOS Batch file to find "new" files by date

  - by Todd McArthur

  My PC has entered an infinite BSOD loop - but I do have access to a safe-mode command prompt. I'm trying to get an idea of "what changed" that might have triggered this. e.g. I might have gotten a virus, or an app update went belly up. I'd like to thus see which files were created/modified in the last few days/week or at least the *.exe, *.dll, *.com, *.bat etc. I thought I was ok with my Batch-fu but I'm stumped on how to write a quick batch file/command that would list the files for me. REM This will find the files, but the results are all muddled REM all EXE files, reverse sort by date, recursively through sub-directories dir *.exe /O-D /S What I'd really like is to find all (executable filetypes) that were created/modified in the last 3-7 days. Can anyone point me in the right direction?

  Read the article

• How to set specific environment variables for Apache service run on Windows

  - by Jimm Chen

  I'm facing a problem. I use xampp 1.7.7 on Windows which installs a Apache service. I find that I have to some tweak to have all PHP modules load properly. For example, php_ldap.dll cannot be loaded. It is mysterious why it cannot be loaded until I tried to run httpd.exe from command line, which reveals that libsasl.dll cannot be founded. Actually, there exist D:\xampp\php\libsasl.dll but httpd.exe cannot find it. OK. The best way is to add D:\xampp\php to PATH env-var. Now my question is: How do I set a specific PATH value for that specific Apache service but not system wide. -- because I think it is better not to disturb other processes with that extra PATH value. Is there a general way to do that for a specific Windows service? or, is there a Apache specific way to load extra env-var settings from some specific configuration files?

  Read the article

• Restore SBS 2003 CompanyWeb calendar from flat files?

  - by BrandonS

  Ok so I have a job of recovering a calendar that was used for an event schedule. The situation is that there was never a backup done except for using Carbonite on the C drive. I have re-installed the server with the same server name and domain. I tried stopping the mssqlsharepoint service and over-righting the two DB files (STS_1.mdf and STS_1_log.LDF) and each one individually each time stopping and restarting the service. Now I knew before I started that this had a slim chance of working but I had to try because everything else i could find involved backing up before restoring and this just wasn't done. Please someone help it is driving me mad I tell you MADDDDDD. ps i am not the genius that set this up just the fool tasked to clean up the mess. :-)

  Read the article

• OpenVPN Configuration - Windows 7 client & debian server

  - by Guillaume

  I recently formatted my Windows 7 computer and lost my client's config files for OpenVPN. I recovered the certificates and default config that were left on the server but I haven't managed to make the whole thing work again. I assume the server's config and routing table are OK because it was working before (although quite some time ago). Would any of you experts be able to help? server.conf # Serveur TCP/666 mode server proto udp port 666 dev tun # Cles et certificats ca ca.crt cert server.crt key server.key dh dh1024.pem tls-auth ta.key 0 cipher AES-256-CBC # Reseau server 10.8.0.0 255.255.255.0 #push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" push "redirect-gateway def1" keepalive 10 120 # Securite user nobody group nogroup chroot /etc/openvpn/jail persist-key persist-tun comp-lzo # Log verb 3 mute 20 status openvpn-status.log log-append /var/log/openvpn.log client.conf # Client client dev tun proto udp remote *my server's ip address*:666 cipher AES-256-CBC # Cles ca ca.crt cert client1.crt key client1.key tls-auth ta.key 1 # Securite nobind persist-key persist-tun comp-lzo verb 3 Routing table on debian server when OpenVPN server is running: Destination Gateway Genmask Indic Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 my server's ip * 255.255.255.0 U 0 0 0 eth0 default 72815.trg.dedic 0.0.0.0 UG 0 0 0 eth0 Routing table on Windows 7 client (OpenVPN not working) =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: [...] =========================================================================== Persistent Routes: None And when the link is established between my client and the server: The server's routing table stays the same. The client's becomes: =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 my server's ip 255.255.255.255 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Persistent Routes: None What's working: Server and client do connect to each other, SSL certificates are OK. The client gets an IP (10.8.0.6) from the server OpenVPN client is started as an administrator. But: I cannot ping the other one on either side. 'Gateway' value is empty on client's side (in the adapter's "status" window). Client has got no internet access when the link is up. Ideal configuration: I only want the client to be able to use the server's Internet access and access its resources (MySQL server in particular). I do not need or want the server to access the client's local network. The client needs to be able to access it's local network, although all Internet traffic should be redirected to the VPN link. I spent a considerable amount of time on this but it's still not working, any help would be much appreciated. Thanks :)

  Read the article

• How to debug high memory usage by registry?

  - by bkr

  I have a windows 2008 r2 server running ADFS2 and some web apps that is having issues with low memory. Digging around I found that the 5.5 GB were being used under Kernel Memory (paged). Further digging with Poolmon, I discovered that the majority of that (5GB+) was being used by CM - configuration manager. Also known as the registry. I'm really now sure how to tell why the registry is using so much memory however, or how to release it? Looking at the physical registry files they don't appear that large. EDIT #1 Using the powershell script @ http://jdhitsolutions.com/blog/2011/05/get-registry-size-and-age/ confirms what I saw looking at the physical registry files, that they're relatively small Computername : (removed) Status : OK CurrentSize : 67 MaximumSize : 2048 FreeSize : 1981 PercentFree : 96.728515625 Created : 4/1/2011 11:38:02 AM Age : 454.23:41:28.2540682

  Read the article

• openssl creates invalid signature if run by a different user

  - by divB

  Very strange problem here: openssl successfully creates signatures but only those created as root are valid whereas created by another user (www-data) are invalid! All files are readable and there are not error messages: # echo -ne Test | openssl dgst -ecdsa-with-SHA1 -sign activation.key > /tmp/asRoot.der # su www-data $ echo -ne Test | openssl dgst -ecdsa-with-SHA1 -sign activation.key > /tmp/asWww-data.der $ uname -a Linux linux 2.6.32-5-openvz-amd64 #1 SMP Mon Feb 25 01:16:25 UTC 2013 i686 GNU/Linux $ cat /etc/debian_version 6.0.7 Both files (asRoot.der and asWww-data.der) are transfered to a different computer for verification with the public key: $ echo -ne Test | openssl dgst -verify activation.pub -keyform DER -signature asRoot.der Verified OK $ echo -ne Test | openssl dgst -verify activation.pub -keyform DER -signature asWww-data.der Verification Failure That can't be true! What's wrong here?

  Read the article

• How to figure out which directory is web server root?

  - by matt

  I want to view websites hosted on my Mac when running Windows VMware Fusion. I have an entry in the Windows hosts file to enable the routing: #ip of my mac domain i use on the VM to access it 192.168.1.70 mymac However, it resolves to an empty directory as a 404 is generated. I can see the access log on my Mac that everything is OK access wise. Firefox on VMware states the following response headers: Server Apache/2.2.14 (Unix) mod_ssl/2.2.14 OpenSSL/0.9.8l DAV/2 PHP/5.3.1 Any ideas how I can figure out what directory is being served? I am lost in a maze of twisty httpd.conf passages. localhost on my Mac resolves to my ~/Sites directory. 192.168.1.70 resolves to the same empty directory/404. Thanks.

  Read the article

• Does laser printer use toner when switched on/off?

  - by Alan Harris-Reid

  I have recently purchased a HP LaserJet M175nw laser printer which goes into sleep-mode after 10 minutes of non-use. I know sleep-mode uses a very small amount of power, but the flashing light on the control panel is driving me nuts! I know I can turn-off the printer via. the on/off button, but when it is turned-on manually, there is some whirring sound which I guess might be the machine warming-up. My question is... Is any toner used during this warm-up (or cleaning) cycle? Am I better-off keeping the printer in sleep mode, or is it ok to turn off manually? TIA Alan

  Read the article

• Sound very faint when watching a movie

  - by ldigas

  Why is it that when I watch (in KMPlayer for the sake of discussion, but it doesn't get any better on most other players I've tried either) a dvdrip movie (ac3, x264) the sound of people's voices is very faint, but the background sound is very loud. This is relatively new ... since in the "old days" the movies played ok. So it must be something with the encoding, or with the used player ? I'm playing it on windows xp on a cheap (i guess) laptop sound card. Nothing special.

  Read the article

• Windows 7 automatically rearranges the start menu

  - by Brice

  I've seen so many messages on how to rearrange the Windows Start Menu and none mentioning the real problem in doing so which has been around since XP at least. I go to ProgramData/Microsoft/Windows/Start Menu and have a day making everything the way I want. For one thing, their Maintenance menu, the Accessories menu and the Administrative Tools menu, I like to put under a Tools folder that I've created. And they seem to move OK. However, within a few hours, I see some of the shortcuts have been moved back or copied back and a new copy of these folders suddenly appears again on my Start Menu at the root. This is maddening and no one seems to even notice in all the tutorials I've read. Anyone know how to change this behavior?

  Read the article

• Make backups of Dropbox folder every week

  - by ilansch

  I have a Dropbox folder which is shared by couple of users. I would like to make a backup of this folder that will occur every week and store this backup on another hard drive. I can simply copy the entire folder each time and this will be the backup, but I would like to copy only the files that have been changed or created during that week. I thought of creating a batch script that will check each file in the Dropbox folder recursively and see its modified date. If that date is later then a given one (current backup date) it will copy the file to a folder named BackUP[Date]. Do you think this solution is OK?

  Read the article

< Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >