Search Results

Search found 7832 results on 314 pages for 'recycle bin'.

Page 186/314 | < Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >

• How to install INFORMIX (IDS) 11.50 in CENTOS 5.4

  - by d23

  Getting ERROR: The wizard cannot continue because of the following error: could not load wizard specified in /wizard.inf (104) Solution: Uninstall everything related with java and jre. Then, download the lastest version of jre for linux x86 or x64, rpm.bin one. And follow these instructions http://www.java.com/en/download/help/linux_install.xml "To install the Linux RPM (self-extracting) file". Make a user and group informix (as root), then uncompress the (informix package).tar in /opt/informix that you have created. And tun ./ids_install, and GUI will work ok. Hope it helps.

  Read the article

• Unable to load memcache.so extension ??

  - by billyduc

  I built php from source with configure command : './configure' '--prefix=/usr/local/php-5.2.8' '--with-config-file-path=/etc --with-config-file-scan-dir=/etc/php.d' '--with-apxs2=/usr/local/httpd/bin/apxs' '--with-mysql=/usr/local/mysql/' '--with-zlib' I installed php memcache extension : wget http://pecl.php.net/get/memcache tar -zxvf memcache-2.2.5.tgz cd memcache-2.2.5 phpize ./configure --enable-memcache make make install I add to my /usr/local/lib/php.in extension=memcache.so Rebooted my apache and run php-m but php seem doesn't load memcache extension I followed this solution from this site http://www.howtoforge.com/forums/showthread.php?t=26554 I added full path extension=/usr/local/lib/php/extensions/no-debug-non-zts-20060613/memcache.so rebooted apache But it didn't load memcache extension ! I google around but the same issue ! How can I load this extension _ _"

  Read the article

• Backup Source (non source control)?

  - by acidzombie24

  I back up my code with svn. I have project files in there however i ignore selected things. I also ignore jpg, ogg, etc. Right now i would like to backup everything. However the zip result is 1gb (i have a lot of code). I know i can cut down the filesize by 60%+ Is there an app i can use which will backup everything except the bin and obj folders? perhaps keep ogg, json, jpg files but ignore .svn or .pdb files?

  Read the article

• Sftp via shell - how it is possible

  - by Tomasz Zielinski

  (Moved from StackOverflow: http://stackoverflow.com/questions/4589725/sftp-via-shell-how-it-is-possible) How is it possible for tools like http://mysecureshell.sourceforge.net/ to provide SFTP access by merely specifying them as shell by typing: usermod -s /bin/MySecureShell myuser ? I'm on Debian Lenny, with default sshd/OpenSSH. Is this e.g. a feature of SSH protocol that allows user shell to handle sftp commands? I can't wrap my head around this because usually OpenSSH needs sftp-server module (or the internal one in newer versions) - and this makes me think that sftp commands don't even hit the shell and are handled earlier or by different code path..

  Read the article

• installing and running google-chrome on an old Ubuntu 7.10 legacy system

  - by 12632

  I am trying to get google-chrome to work on Ubuntu 7.10. I installed it with --force-depends and got it to install, but now when I try to run it, I get this error: /usr/bin/google-chrome: error while loading shared libraries: libnss3.so: cannot open shared object file: No such file or directory Is there a way to still get google-chrome to load even without this dependency satisfied? This is an old system that needs to keep this old 7.10 Ubuntu version and I would like to have google-chrome if possible installed, even if it means no sound or other features that are not compatible.

  Read the article

• How do I set up an sftp user to login with a password to an EC2 ubuntu server ?

  - by Doron

  Hello, I have an Ubuntu Server running on an EC2 instance. To login to that server I use a certificate file without any password. I've installed and configured vsftpd and created a user (let's call him "testuser") for which I've set a /bin/false ssh terminal so it will only be able to connect via sftp and upload/access files on his home directory. However - when I try to connect to the server from my computer, running sftp testuser@my-ec2-server I get Permission denied (publickey). Connection closed messages so I can't log in. How can I remove the certificate requirement for this user only (meaning, the "ubuntu" user will still have to use the certificate file to login via ssh), so normal sftp clients will be able to connect using a username and a password ? Thank you. PS Using Ubuntu Server 10.10 official AMI from canonical, 64bit on a micro instance.

  Read the article

• crontab environment

  - by Adamski

  I have written various scripts to launch Java server applications, which are typically run for 24 hours before being shut down (by invoking the same script with a different parameter). The script relies on environment variables defined in a file: ~/<user>.env, which I source from .bashrc. This works fine when invoking the script from the command line but if I want to add the script as a crontab entry I run into the problem where .bashrc isn't read. My question: What is the best practice approach for solving this problem? I realise I could define a crontab entry such as: * * * * 1-5 /usr/bin/bash -c '. /home/myuser/myuser.env && /home/myuser/scripts/myscript.sh' ... but this seems plain ugly. Alternatively I could source myuser.env at the beginning of every script, but this would become a nightmare to maintain. Any help appreciated.

  Read the article

• ssh-agent is broken after running Meerkat - can connect to git in terminal but not in Tower - no keychain access

  - by marblegravy

  My mac running Snow leopard 10.6.8 is having trouble handling it's ssh keys. I could previously access all my git repo's via Tower without an issue. The other day I ran Meerkat to see what it was about and it looks like it has broken the way ssh works. Terminal doesn't seem to have a problem and can still connect to Git, but it can't access the keychain. Tower doesn't seem to be able to access anything. The Tower support crew have been super helpful, but I wanted to float this here and see if anyone has any ideas on how to fix my problem. The only hints I have are: $ which ssh returns: /usr/bin/ssh and echo $SSH_AUTH_SOCK returns: /tmp/ssh-nBhRYVEg8t/agent.199 (This one seems to be wrong as I think it's supposed to point to a Listener, but no idea how to fix it) additional: Keychain first-aid finds no problems. The problem seems to be that ssh-agent is not being run properly... but that's just a guess.

  Read the article

• How do I reference the value of a constructed environment variable in a loop?

  - by Rob Spieldenner

  What I'm trying to do is loop over environment variables. I have a number of installs that change and each install has 3 IPs to push files to and run scripts on, and I want to automate this as much as possible (so that I only have to modify a file that I'll source with the environment variables). The following is a simplified version that once I figure out I can solve my problem. So given in my.props: COUNT=2 A_0=foo B_0=bar A_1=fizz B_1=buzz I want to fill in the for loop in the following script #!/bin/bash . <path>/my.props for ((i=0; i < COUNT; i++)) do <script here> done So that I can get the values from the environment variables. Like the following(but that actually work): echo $A_$i $B_$i or A=A_$i B=B_$i echo $A $B returns foo bar then fizz buzz

  Read the article

• Run Bash Script Another Server

  - by psce

  I want to run command one by one, for change the names of the directories on the server. When I run script, directories renamed in server 1. But, directories are not found in server 2. What the error could be in the script? Script; #!/bin/bash mach_directory=/home/user/example erase_dir1=cache erase_dir2=tmp for i in {0..10} do user=user server=$(ssh $user@server$i hostname) ssh $user@$server find $mach_directory -type d -name $erase_dir1 ! -path "*Admin/$erase_dir1*" -print0 | while IFS= read -r -d '' file ; do mv "$file" "${file}_$(date +%d%m%Y)"; done ssh $user@$server find $mach_directory -type d -name $erase_dir2 ! -path "*Admin/$erase_dir2*" -print0 | while IFS= read -r -d '' file ; do mv "$file" "${file}_$(date +%d%m%Y)"; done done

  Read the article

• Unmounted root partition

  - by Jack

  My server running Debian lenny has just had a power cut recently and its come back up with the root partition in read only mode. I tried to remount the filesystem in read write mode with mount -n -o remount,rw / which then gave the output mount: block device /dev/hda1 is write-protected, mounting read-only. But now the root filesystem isn't mounted at all so I can't run anything to mount the partition again or any other command for that matter such as shutdown because /bin/ isn't there. Is there anything I can do remotely?

  Read the article

• Mac Terminal: changed my shell, now can't start it

  - by kch

  I installed bash 4.0 via MacPorts, then used sudo chsh -s /opt/local/bin/bash my_user to change my shell. Before that I tried just running plain chsh without sudo, but it wouldn't allow me to change my shell to that path. Now when I try to start Terminal I'm getting a message that my shell has an illegal value, so Terminal won't start. I click Quit, and, unsurprisingly but annoyingly, it quits immediately. How do I reset my shell so I can start Terminal again? How do I set my shell to bash installed via MacPorts in a way that it'll work? Why does Terminal think my shell is illegal anyway? Is it siding with the neo-prohibitionists? Mac OS X 10.5.8. Everything super mega up-to-date.

  Read the article

• Sun Java keytool importing EV certificates into a single keystore

  - by ss0

  At my current job we are using tomcat, customers have custom web portals setup on their own local machines. EV certs are new to me, they have 2 part intermediary and a primary certificate. For our product to work it appears I need to get all three parts installed under a single keystore entry. How can I roll all three parts into a single x.509 compliant file for import? They syntax I am using is as follows: /blah/system/j2sdk/bin/keytool -import -alias foo -keystore /zix/system/jdk1.5.0_06/jre/lib/security/cacerts -file certname.pem -trustcacerts where foo = the keystore name and certname.pem is the main cert. I have tried importing the intermediate certs under their own names into the keystore and I don't know if it's just the product I have to work with (not vanilla tomcat) or what but it doesn't see those. I have seen a working system and all three certs were under the single keystore alias. Anyone have any ideas?

  Read the article

• Startup script on Ubuntu 12.04 not getting executed. Dependencies / load order.

  - by user861181

  I want to create a simple startup script on Ubuntu 12.04: myscript.sh #!/bin/sh sudo /etc/init.d/nginx start cd ~/app/current god -c config/resque.god sudo /etc/init.d/redis-server start echo "SCRIPT RUN" I have it at /etc/init.d/myscript.sh When I do sudo chkconfig --level 2345 myscript.sh I get myscript.sh 2345 When I do sudo chkconfig --add myscript.sh I get insserv: warning: script 'K01myscript.sh' missing LSB tags and overrides insserv: warning: script 'myscript.sh' missing LSB tags and overrides The script you are attempting to invoke has been converted to an Upstart job, but lsb-header is not supported for Upstart jobs. insserv: warning: script 'dbus' missing LSB tags and overrides .... myscript.sh 0:off 1:off 2:on 3:on 4:on 5:on 6:off ** EDIT:: I checked the boot.log and it turns out that the script is run, but the problem is that god is not loaded yet when the script is executed. Apparently I want to load this script as the very last thing at startup (or somehow check if god is loaded and then start the script).

  Read the article

• Problem with script that excludes large files using Duplicity and Amazon S3

  - by Jason

  I'm trying to write an backup script that will exclude files over a certain size. If i run the script duplicity gives an error. However if i copy and paste the same command generated by the script everything works... Here is the script #!/bin/bash # Export some ENV variables so you don't have to type anything export AWS_ACCESS_KEY_ID="accesskey" export AWS_SECRET_ACCESS_KEY="secretaccesskey" export PASSPHRASE="password" SOURCE=/home/ DEST=s3+http://s3bucket GPG_KEY="gpgkey" # exclude files over 100MB exclude () { find /home/jason -size +100M \ | while read FILE; do echo -n " --exclude " echo -n \'**${FILE##/*/}\' | sed 's/\ /\\ /g' #Replace whitespace with "\ " done } echo "Using Command" echo "duplicity --encrypt-key=$GPG_KEY --sign-key=$GPG_KEY `exclude` $SOURCE $DEST" duplicity --encrypt-key=$GPG_KEY --sign-key=$GPG_KEY `exclude` $SOURCE $DEST # Reset the ENV variables. export AWS_ACCESS_KEY_ID= export AWS_SECRET_ACCESS_KEY= export PASSPHRASE= When the script is run I get the error; Command line error: Expected 2 args, got 6 Where am i going wrong??

  Read the article

• Why is wp-cron taking up so many resources?

  - by Gaia

  From /var/logs/httpd/error-log: [Thu Apr 22 01:41:15 2010] [notice] mod_fcgid: call /var/www/vhosts/mydomain.com/httpdocs/wp-cron.php with wrapper /usr/bin/php-cgi [Thu Apr 22 01:41:15 2010] [notice] mod_fcgid: server /var/www/vhosts/mydomain.com/httpdocs/wp-cron.php(17999) started ...The previous line shows up 8661 times... What's in Cron? Apr 22, 2010 @ 18:25 (1271960731) Twice Daily wp_version_check Apr 22, 2010 @ 18:25 (1271960731) Twice Daily wp_update_plugins Apr 22, 2010 @ 18:25 (1271960731) Twice Daily wp_update_themes Apr 23, 2010 @ 12:21 (1272025294) Once Daily wp_scheduled_delete Running CentoOS 5/plesk 9.3/php as FastCGI/suExec with WP 2.9.2 Thanks in advance.

  Read the article

• Cannot set target directory when extracting an archive using tar

  - by palto

  I'm trying to extract a tar archive to a specific directory. I've tried using -C flag but it doesn't work as expected. Here is the commandline I'm using tar xvf myarchive.tar -C mydirectory/ This gives me a following error: tar: file -C: not present in archive tar: file mydirectory/: not present in archive I've also tried setting the -C flag before the archive file but it just says this: tar xvf -C mydirectory/ myarchive.tar tar: -C: No such file or directory What am I doing wrong? EDIT: tar -tf shows that the tar archive does not have full path names: tar -tf myarchive.tar herareport/ herareport/bin/ ...

  Read the article

• GDM login screen is not displayed with VNC

  - by niboshi

  Hi, I set up VNC server with xinetd. Also configured GDM so that XDMCP is enabled. VNC connection seems okay, but GDM login screen is not shown. Instead I can only see old bare X screen (gray meshed background and X-shaped mouse pointer), which I can't do any interaction with it. What can I do to fix the problem? No log is written below /var/log/. Server distribution: Ubuntu marverick /etc/xinetd.d/vnc is like below: service vnc1024 { disable = no socket_type = stream protocol = tcp wait = no user = nobody server = /usr/bin/Xvnc server_args = -inetd -query localhost -geometry 1024x768 -depth 24 -once securitytypes=none port = 12345 } /etc/gdm/custom.conf: [daemon] [security] DisallowTCP=false [xdmcp] Enable=true [gui] [greeter] [chooser] [debug] [servers] /etc/services is also configured. Thanks

  Read the article

• Fluxbox startup file not working

  - by Jack

  I am placing apps into my fluxbox startup file as per the instructions, however nothing starts up except fluxbox. It doesn't matter what app I try, so it isn't an app problem. here is my startup file: #!/bin/sh # # fluxbox startup-script: # # Lines starting with a '#' are ignored. # Change your keymap: xmodmap "/home/josh/.Xmodmap" # Applications you want to run with fluxbox. # MAKE SURE THAT APPS THAT KEEP RUNNING HAVE AN ''&'' AT THE END. tint2 & tilda & # And last but not least we start fluxbox. # Because it is the last app you have to run it with ''exec'' before it. exec fluxbox # or if you want to keep a log: # exec fluxbox -log "/home/josh/.fluxbox/log" I have also tried tests such as "touch ~/testwoked" and such, nothing works. It makes no difference if the file is executable or not.

  Read the article

• Linux kernel with grsec + Java / Apache Tomcat

  - by NoozNooz42

  I've got a Debian Linux 64 bit dedicated server. The kernel has the grsec patch applied. I'm mainly using this server to run Apache Tomcat (6.0.26, Java 6) and everything seems fine. The only issue, is that when I start Tomcat, I get a few of these: grsec: From xxx.xxx.xxx.xxx: Segmentation fault occurred at 00007fefe04e4000 in /home/t/jre1.6.0_20/bin/java[java:22403] uid/euid:1001/1001 gid/egid:1001/1001, parent /sbin/init[init:1] uid/euid:0/0 gid/egid:0/0 grsec: more alerts, logging disabled for 10 seconds Then no error logs anymore. Everything is fine. The kernel is: Linux 2.6.32.2-xxxx-grs-ipv4-64 #1 SMP Tue Dec 29 14:41:12 UTC 2009 x86_64 GNU/Linux And the webapp works fine. So there are segmentation fault when Tomcat starts, but everything seems to works fine. Is this concerning? Should I move to a non-grsec kernel?

  Read the article

• Vacation sends autoreply message to the recipient as well

  - by elitalon

  Hi, I have configured my Postfix server with vacation for a domain. Sending a message to [email protected] causes two events: The message is delivered to the recipient ([email protected]) An auto-reply message is sent to the sender, alerting that [email protected] should be used instead. Everything works well except for one particular drawback: the auto-reply is also sent to the recipient, so it receives two messages in the end. What can I do to avoid that? I'm only using the $TO variable in the custom vacation.msg message. And here is Postfix's master.cf vacation line: autoreply unix - n n - - pipe flags=Rhu user=vacation argv=/usr/bin/vacation -j -m /home/vacation/.vacation.msg -f /home/vacation/.vacation.db vacation I know using the -j is a little bit risky according to man page, but I'm kind of testing here.

  Read the article

• Trying to create a git repo that does an automatic checkout everytime someone updates origin

  - by Dane Larsen

  Basically, I have a server with a git repo 'origin'. I'm trying to have another repo auto-pull from origin every time someone pushes code to it. I've been using the hooks in origin, specifically post-receive. So far, my post receive looks something like this: #!/bin/sh GIT_DIR=/home/<user>/<test_repo> git pull origin master But when I push to origin from another computer, I get the error: remote: fatal: Not a git repository: '/home/<user>/<test_repo>' However, test_repo most definitely is a git repo. I can cd into it and run 'git pull origin master' and it works fine. Is there an easier way to do what I'm trying to do? If not, what am I doing wrong with this approach? Thanks in advance. Edit, to clarify: The repo is a website in progress, and I'd like to have a version of it available at all times that is fully up to date.

  Read the article

• How much memory should my rails stack be consuming?

  - by Hamish

  I am running my own webserver on a 384MB VPS from Slicehost to serve two Ruby on Rails applications on separate Virtual Hosts. I am running Phusion Passenger with Apache2. The following is the contents of my Passenger.conf <IfModule passenger_module> PassengerRoot /opt/ruby-enterprise-1.8.6-20090610/lib/ruby/gems/1.8/gems/passenger-2.2.11 PassengerLogLevel 0 PassengerRuby /usr/local/bin/ruby PassengerUserSwitching on PassengerDefaultUser nobody PassengerMaxPoolSize 3 PassengerMaxInstancesPerApp 2 PassengerPoolIdleTime 300 # Ruby on Rails Options RailsAutoDetect on RailsSpawnMethod smart NameVirtualHost *:80 If i do a 'top' on my server I have 314MB used on average, this seems like too much? Am I mistaken and if not what possible steps can I take to reduce the Memory usage? Thanks!

  Read the article

• Is there a difference between starting a WebLogic Admin Server through the command-line or through t

  - by lindelof

  I have WebLogic 11g installed on my machine under /srv/wls, and I start Node manager on it with /srv/wls/wlserver_10.3/server/bin/startNodeManager.sh. I create my domain with config.sh, and then I want to start the Admin Server of that domain with Node Manager. So I open a WLST session and do the following: > nmConnect(...) > nmStart('AdminServer') But when I then visit localhost:7001/console, and login, the screen on the browser remains blank and the server logs tell me the server has run out of PermGen space. I don't encounter this problem when starting the Admin Server through the shell script under $DOMAIN/startWebLogic.sh. Then it works fine. Any idea what I am doing wrong? I couldn't find anything in Google nor on the Oracle forums...

  Read the article

• gnu coreutils split verbose flushed?

  - by 130490868091234

  When using the GNU coreutils split command with verbose mode, how can I make the lines that appear in the STDOUT be flushed with respect to the time when the file has finally been created? Fore example, running it like this: ~/coreutils/bin/split --verbose -d -u -l 10000000 1>out & tail -f out creating file `x00' creating file `x01' creating file `x02' [...] I would have expected the line creating file 'x00' to have appeared in file out after the file has been completely written, but instead, it seems like nothing is written into out until the whole file has been finally processed. Is there a way to change this behavior?

  Read the article

< Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >