Search Results

Search found 20607 results on 825 pages for 'secure global desktop'.

Page 186/825 | < Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >

• SAFE MODE Restriction in effect. The script not allowed to access directory owned by uid

  - by user57221

  I am running a dedicated server with multiple websites. I have created a global directory for common scripts for all websites, rather than repeating them in every website directory. How can I make this global directory accessible for all website. I am getting following error. Warning: require_once() [function.require-once]: SAFE MODE Restriction in effect. The script whose uid is XXXX is not allowed to access /vhosts/globallibrary/Zend/Application.php owned by uid XXXX I have change the ownership of global directory for X website. so it works fine for X website. latter I added another website Y Now I am getting the same error again. If I change the CHOWN for Y website then X website will have the same error. I don't want to disable the safemode restriction. Is there a work around, so that this global dir will be accessible by all website. I am getting following error in my browser when I try to access global directory. Global directory is on same level as all other websites. Is this a good practice to enable safemode for websites?

  Read the article

• Western Digital HDD disappears and reappears in BIOS

  - by tbkn23

  I know many people asked about similar problems, but I have a very specific case where I can't understand what's going on... I have a 3TB Western Digital Caviar Green disk connected in my Desktop, that also has a seagate 1.5TB disk and 2 SSD drives (OCZ and Sandisk). After working fine for quite some time (probably more than a year), suddenly my Caviar Green drive disappeared from windows. I checked the BIOS, and it wasn't there either. I opened my PC, played with the connectors, power, etc, but nothing helped. Even tried switching connectors with those of the 1.5TB disk, and nothing changed, the 1.5TB seagate was there, but the 3TB WD was not. Ok, now for the strange part. I have another desktop at home, so I took out my 3TB drive, connected it there, and it worked fine! I copied the most important files out of it, and then made another attempt in the original desktop. Surprise! It now appeared in the BIOS and worked fine! I even ran the SMART test with the WD tools and it said everything was intact. It doesn't end here. After leaving it overnight in the original desktop, it disappeared again in the morning. I repeated the entire process, connecting it to the second desktop, and there it is again working fine. Now for my question... Whats going on? The disk seems to be appearing on/off in my original Desktop, while other drives there work fine. SMART test says the disk is fine. Any ideas? Is the disk defective and should be replaced? Or maybe there's a problem with the controller in the desktop? I'm using a Gigabyte GA-880GA-UD3H motherboard and tried connecting the drive to both bridges (SATA2 and SATA3 bridges). Thanks EDIT: Power options are set never to turn off hard drives:

  Read the article

• Which language/framework to use for this desktop internet application?

  - by Karsten

  I'd like to experiment with a new language/framework to work on some desktop tools for myself, which will do tasks related to internet services. I.e. i'd like to to monitor some of my servers for http or icmp response, also parse xml responses. I have experience with php, lua, mysql, and basic knowledge of java and c++. I'm also interested in exploring multithreading for this, background tasks and a responsive gui do need that as i have read. Being a private project, i certainly want to learn something new, but i don't have that much free time. The question for you would be which language and what framework to choose that could help me with this tasks: lightweight + fast gui (windows only would be ok, platform-independent even better) network/socket support, html module would be appreciated htmlview support xml "parsing" support (xpath or something like the phpish DOMDocument class) threading support Free software would be nice, but paying some bucks won't hurt me if it really helps the case.

  Read the article

• How to build a setup package for a desktop application using SQL CE 3.5 and Entity Framework?

  - by Emad

  I am having a WPF desktop application that uses SQL CE (compact edition 3.5 ) and using the Entity Framework as a Datalayer. As It turned out in (http://support.microsoft.com/default.aspx?scid=kb;en-us;958478&sd=rss&spid=2855 ) and (http://social.msdn.microsoft.com/Forums/en-US/sqlce/thread/b6bac277-cf66-4c74-a0b3-e48abedbd161/ ) There Is some problem with the Entity Framework and SQL CE and I had to get the hotfix (basically a new build of the SQL CE called 3.5.1) My problem now is how to build a setup package in order to make it work in case some users already had the SQL CE 3.5 installed on their machines? I have included the DLLs directly in the application but when the sql ce is installed, its DLLs are in the GAC and have precedence over the local ones and the application crashes. I need the build a setup that would work "even if" the user already had the old buggy version.

  Read the article

• Why is my launcher icon smaller when placed on the Android desktop?

  - by Richard

  I have an application built for 1.5 and I am adding higher resolution drawables to support hdpi devices in 1.6 and above. My original application icon is 48x48. I created a second launcher icon that is 72x72 and placed it in a res/drawable-hdpi/ directory. When I install the application on my Nexus One the icon looks good when I view it in the application menu. But when I place it on the desktop it appears small relative to other icons, my guess is I'm seeing the 48x48 version with no scaling. These are my two resource directories: res/drawable/appicon.png res/drawable-hdpi/appicon.png Do I need to do something differently either with my directory structure or my manifest file to get things to display correctly? Thanks!

  Read the article

• Silverlight 4 desktop application sometimes zooms when touching it... and cannot zoom out

  - by TimothyP

  Hi, I have a Silverlight 4 desktop application which I control using a touchscreen (on an HP Touchsmart). Most of the time it works fine but sometimes when clicking something everything just zooms in and every time it happens things get bigger and bigger. The only way to get the normal size again is by restarting the application. Has anybody got any idea what might be causing it ? Does not seem to happen in browser mode. Is there a way to prevent zooming? Thnx

  Read the article

• Programmatically Download Image to Desktop from Remote App with Ruby?

  - by viatropos

  I was thinking about making a little crop/resize batch processor online, and wanted to know if there was a way for me to do the following: upload image and specify dimensions click "process" and app resizes image image downloads automatically to wherever it was I uploaded it (say from my desktop), but with a new name (based on the time for example). This would make it so I could host a free image processor that never stored any data other than tempfiles. Is that possible? Something like Rails' send_file method, but I'm using Sinatra and am looking for something in pure ruby.

  Read the article

• Best anti boss tricks to hide your private page navigation from your desktop.

  - by systempuntoout

  This question is slightly related to programming and it's kinda lame, i know; but i saw many funny things in these years and i'm looking for new tricks from you. I'm talking about methods to fast-hide\camouflage not job related web pages on your desktop when boss arrives like a ghost\ninja behind your shoulders. I know how much can be frustrating, programming hard for ten hours and then been caught by your boss watching XKCD during a 2 minutes break. I think the most common anti boss trick is the evergreen CTRL+TAB, but you have to be fast and your left hand has to be near the keyboard. I saw pitch black brightness on Lcd (how can you pretend to program on that?) or custom sized browser to fit a little space just below the IDE. My favourite one at the moment is using fire gesture plugin with FF; with a micro gesture you can hide FF to your tray in a blink of an eye. Do you have any trick to share?

  Read the article

• Force Response to Download File(s) to Desktop with Ruby?

  - by viatropos

  I was thinking about making a little crop/resize batch processor online, and wanted to know if there was a way for me to do the following: upload image and specify dimensions click "process" and remote app resizes image image downloads automatically locally to wherever it was I uploaded it (say from my desktop), but with a new name (based on the time for example). This would make it so I could host a free image processor that never stored any data other than tempfiles. Is that possible? Something like Rails' send_file method, but I'm using Sinatra and am looking for something in pure ruby. What's the basic concept behind this? What if I wanted to do this for multiple files? Åssuming I can get multiple files uploaded no problem, how can I download all of them automatically?

  Read the article

• Easiest solution to sync an offline (local desktop application) database with a central server and multiple pc's?

  - by tyfius

  I have a desktop application which uses a local database. (This can be SQLite, SqlCe, PostgreSQL or any other database I will be able to install locally, I haven't decided which one to use yet.) The plan is to achieve the following: A user can subscribe to some kind of cloud service. If he does his local database should be synced with the online database (one for all users, or one per user, whatever the easiest solution is) so he will be able to sync his local database data between multiple PC's, can access his data online. (Much like dropbox does for files.) What is the best, easiest (and preferably cheapest) solution to achieve this? I am looking into DataObjects.net but I can't find much documentation about their Sync feature. Or, are there other alternatives? For example, I start with some kind of cloud service which allows local caching and use the local caching for users who do not subscribe to the service. Any pointers, tips or experiences are welcome.

  Read the article

• Using resize to getScript if above x pixels (jQuery)

  - by user1065573

  So I have an issue with this script. It basically is loading the script on any resize event. I have it working if lets say... - User has window size above 768 (getScipt() and content by .load() in that script) - Script will load (and content) - User for some reason window size goes below 768 (css hides #div) - User re-sizes again above 768, And does not load the script again! (css displays the div) Great. Works right. Now.. (for some cray reason) - User has window size below 768 (Does NOT getScript() or nothing) - User re-sizes above 768 and stops at any px (getScript and content) - User re-sizes again anything above 768 (It getScript AGAIN) I need it to only get script once. Ive used some code from here jQuery: How to detect window width on the fly? (edit - i found this, which he has the same issue of loading a script once.) Problem with function within $(window).resize - using jQuery And others i lost the links to :/ When i first found this problem I was using something like this, then i added the allcheckWidth() to solve problem. But it does not. var $window = $(window); function checkWidth() { var windowsize = $window.width(); ////// LETS GET SOME THINGS IF IS DESKTOP var $desktop_load = 0; if (windowsize >= 768) { if (!$desktop_load) { // GET DESKTOP SCRIPT TO KEEP THINGS QUICK $.getScript("js/desktop.js", function() { $desktop_load = 1; }); } else { } } ////// LETS GET SOME THINGS IF IS MOBILE if (windowsize < 768) { } } checkWidth(); function allcheckWidth () { var windowsize = $window.width(); //// IF WINDOW SIZE LOADS < 768 THEN CHANGES >= 768 LOAD ONCE var $desktop_load = 0; if (!$desktop_load) { if (windowsize < 768) { if ( $(window).width() >= 768) { $.getScript("js/desktop.js", function() { $desktop_load = 1; }); } } } } $(window).resize(allcheckWidth); Now im using something like this which makes more sense? $(function() { $(window).resize(function() { var $desktop_load = 0; //Dekstop if (window.innerWidth >= 768) { if (!$desktop_load) { // GET DESKTOP SCRIPT TO KEEP THINGS QUICK $.getScript("js/desktop.js", function() { $desktop_load + 1; }); } else { } } if (window.innerWidth < 768) { if (window.innerWidth >= 768) { if (!$desktop_load) { // GET DESKTOP SCRIPT TO KEEP THINGS QUICK $.getScript("js/desktop.js", function() { $desktop_load + 1; }); } else { } } } }) .resize(); // trigger resize event }) Ty for future response. Edit - To give an example, in desktop.js i have a gif that loads before "abc" content, that gets inserted by .load(). On resize this gif will show up and the .load() in desktop.js will fire again. So if getScript was only being called once, it should not be doing anything again in desktop.js. Confusing?

  Read the article

• Ensure that my C# desktop application is making requests to my ASP .NET MVC action?

  - by Mathias Lykkegaard Lorenzen

  I've seen questions that are almost identical to this one, except minor but important differences that I would like to get detailed. Let's say that I have a controller and an action method in MVC which therefore accepts requests on the following URL: http://example.com/api/myapimethod?data=some-data-here. This URL is then being called regularly by 1000 clients or more spread out in the public. The reason for this is crowdsourcing. The clients around the globe help feed a global cache on my server, which makes it faster for the rest of the clients to fetch the data. Now, if I'm sneaky (and I am), I can go into Fiddler, Ethereal, Wireshark or any other packet sniffing tool and figure out which requests the program is making. By figuring that out, I can also replicate them, and fill the service with false corrupted data. What is the best approach to ensuring that the data received in my ASP .NET MVC action method is actually from the desktop client application, and not some falsely generated data that the user invented? Since it is all based on crowdsourcing, would it be a good idea for my users to be able to "vote" if some data is falsified, and then let an automatic cleanup commence if there are enough votes? I do not have access to a tool like SmartAssembly, so unfortunately my .NET program is fully decompilable. I realize this might be impossible to accomplish in an error-proof manner, but I would like to know where my best chances are.

  Read the article

• How can I do something ~after~ an event has fired in C#?

  - by Siracuse

  I'm using the following project to handle global keyboard and mouse hooking in my C# application. This project is basically a wrapper around the Win API call SetWindowsHookEx using either the WH_MOUSE_LL or WH_KEYBOARD_LL constants. It also manages certain state and generally makes this kind of hooking pretty pain free. I'm using this for a mouse gesture recognition software I'm working on. Basically, I have it setup so it detects when a global hotkey is pressed down (say CTRL), then the user moves the mouse in the shape of a pre-defined gesture and then releases global hotkey. The event for the KeyDown is processed and tells my program to start recording the mouse locations until it receives the KeyUp event. This is working fine and it allows an easy way for users to enter a mouse-gesture mode. Once the KeyUp event fires and it detects the appropriate gesture, it is suppose to send certain keystrokes to the active window that the user has defined for that particular gesture they just drew. I'm using the SendKeys.Send/SendWait methods to send output to the current window. My problem is this: When the user releases their global hotkey (say CTRL), it fires the KeyUp event. My program takes its recorded mouse points and detects the relevant gesture and attempts to send the correct input via SendKeys. However, because all of this is in the KeyUp event, that global hotkey hasn't finished being processed. So, for example if I defined a gesture to send the key "A" when it is detected, and my global hotkey is CTRL, when it is detected SendKeys will send "A" but while CTRL is still "down". So, instead of just sending A, I'm getting CTRL-A. So, in this example, instead of physically sending the single character "A" it is selecting-all via the CTRL-A shortcut. Even though the user has released the CTRL (global hotkey), it is still being considered down by the system. Once my KeyUp event fires, how can I have my program wait some period of time or for some event so I can be sure that the global hotkey is truly no longer being registered by the system, and only then sending the correct input via SendKeys?

  Read the article

• How do I use Notepad++ (or other) with msysgit?

  - by PHLAK

  How do I use Notepad++ (or any other editor besides vim) with msysgit? I tried all of the following to no avail: git config --global core.editor C:\Program Files\Notepad++\notepad++.exe git config --global core.editor "C:\Program Files\Notepad++\notepad++.exe" git config --global core.editor C:/Program Files/Notepad++/notepad++.exe git config --global core.editor C:\\Program Files\\Notepad++\\notepad++.exe

  Read the article

• Insane CPU usage in QT 5.0

  - by GravityScore

  I'm having trouble using the QT framework, particularly with the paintEvent of QWidget. I have a QWidget set up, and am overriding the paintEvent of it. I need to render a bunch of rectangles (grid system), 51 by 19, leading to 969 rectangles being drawn. This is done in a for loop. Then I also need to draw an image on each on of these grids. The QWidget is added to a QMainWindow, which is shown. This works nicely, but it's using up 47% of CPU per window open! And I want to allow the user to open multiple windows like this, likey having 3-4 open at a time, which puts the CPU close to 150%. Why does this happen? Here is the paintEvent contents. The JNI calls don't cause the CPU usage, commenting them out doesn't lower it, but commenting out the p.fillRect and Renderer::renderString (which draws the image) lowers the CPU to about 5%. // Background QPainter p(this); p.fillRect(0, 0, this->width(), this->height(), QBrush(QColor(0, 0, 0))); // Lines for (int y = 0; y < Global::terminalHeight; y++) { // Line and color method ID jmethodID lineid = Manager::jenv->GetMethodID(this->javaClass, "getLine", "(I)Ljava/lang/String;"); error(); jmethodID colorid = Manager::jenv->GetMethodID(this->javaClass, "getColorLine", "(I)Ljava/lang/String;"); error(); // Values jstring jl = (jstring) Manager::jenv->CallObjectMethod(this->javaObject, lineid, jint(y)); error(); jstring cjl = (jstring) Manager::jenv->CallObjectMethod(this->javaObject, colorid, jint(y)); error(); // Convert to C values const char *l = Manager::jenv->GetStringUTFChars(jl, 0); const char *cl = Manager::jenv->GetStringUTFChars(cjl, 0); QString line = QString(l); QString color = QString(cl); // Render line for (int x = 0; x < Global::terminalWidth; x++) { QColor bg = Renderer::colorForHex(color.mid(x + color.length() / 2, 1)); // Cell location on widget int cellx = x * Global::cellWidth + Global::xoffset; int celly = y * Global::cellHeight + Global::yoffset; // Background p.fillRect(cellx, celly, Global::cellWidth, Global::cellHeight, QBrush(bg)); // String // Renders the image to the grid Renderer::renderString(p, tc, text, cellx, celly); } // Release Manager::jenv->ReleaseStringUTFChars(jl, l); Manager::jenv->ReleaseStringUTFChars(cjl, cl); }

  Read the article

• Creating a desktop icon using JWS JNLP for a JavaFX app.

  - by Sleepycat

  I am trying to get a custom destop icon to be displayed for my app but for some reason no matter what I do the same default java icon shows up. I have tried everything I can think of and gone and compared my jnlp file with others whose icons seem to work ok. According to everything I have read the following should work fine. But of course, it doesn't: <information> <title>MikesApp</title> <vendor>Mike</vendor> <homepage href="http://www.mikesapp.com/"/> <description>Mikes App.</description> <icon kind="shortcut" href="res/icon64x64.png" width="64" height="64"/> <offline-allowed/> <shortcut> <desktop/> </shortcut> </information> Any ideas would be greatly appreciated.

  Read the article

• How do you parse the XDG/gnome/kde menu/desktop item structure in c++??

  - by Joe Soul-bringer

  I would like to parse the menu structure for Gnome Panels (the standard Gnome Desktop application launcher) and it's KDE equivalent using c/c++ function calls. That is, I'd like a list of what the base menu categories and submenu are installed in a given machine. I would like to do with using fairly simple c/c++ function calls (with NO shelling out please). I understand that these menus are in the standard xdg format. I understand that this menu structure is stored in xml files such as: /home/user/.config/menus/applications.menu I've look here: http://www.freedesktop.org/wiki/Specifications/menu-spec?action=show&redirect=Standards%2Fmenu-spec but all they offer is the standard and some shell files to insert item entries (I don't want shell scripts, I don't want installation, I definitely don't want to create a c-library from the XDG specification. I want to find the existing menu structure). I've looked here: http://library.gnome.org/admin/system-admin-guide/stable/menustructure-13.html.en for more notes on these structures. None of this gives me a good idea of how determine the menu structures using a c/c++ program. The actual gnome menu structures seem to be a horrifically hairy things - they don't seem to show the menu structure but to give an XML-coded description of all the changes that the menus have gone through since installation. I assume gnome panels parses these file so there's a function buried somewhere to do this but I've yet to find where that function is after scanning library.gnome.org for a couple of days. I've scanned the Nautilus source code as well but Panels seem to exist elsewhere or are burried well. Thanks in advance

  Read the article

• How to install a desktop shortcut (to a batch file) from a WiX-based installer that has "Run as Admi

  - by arathorn

  I'm installing a desktop shortcut (to a batch file) from a WiX-based installer -- how do I automatically configure this shortcut with the "Run as Administrator" setting enabled? The target OS is Windows Server 2008 R2, and the installer is running with elevated priveleges. Update: Thanks to the link provided by @Anders, I was able to get this working. I needed to do this in a C# CustomAction, so here is the C# version of the code: namespace CustomAction1 { public class CustomAction1 { public bool MakeShortcutElevated(string file_) { if (!System.IO.File.Exists(file_)) { return false; } IPersistFile pf = new ShellLink() as IPersistFile; if (pf == null) { return false; } pf.Load(file_, 2 /* STGM_READWRITE */); IShellLinkDataList sldl = pf as IShellLinkDataList; if (sldl == null) { return false; } uint dwFlags; sldl.GetFlags(out dwFlags); sldl.SetFlags(dwFlags | 0x00002000 /* SLDF_RUNAS_USER */); pf.Save(null, true); return true; } } [ComImport(), Guid("00021401-0000-0000-C000-000000000046")] public class ShellLink { } [ComImport(), InterfaceType(ComInterfaceType.InterfaceIsIUnknown), Guid("45e2b4ae-b1c3-11d0-b92f-00a0c90312e1")] interface IShellLinkDataList { void GetFlags(out uint pdwFlags); void SetFlags(uint dwFlags); } }

  Read the article

• How to detect that the internet connection has got disconnected through a java desktop application?

  - by Yatendra Goel

  I am developing a Java Desktop Application that access internet. It is a multi-threaded application, each thread do the same work (means each thread is an instance of same Thread class). Now, as all the threads need internet connection to be active, there should be some mechanism that detects whether an internet connection is active or not. Q1. How to detect whether the internet connection is active or not? Q2. Where to implement this internet-status-check-mechanism code? Should I start a separate thread for checking internet status regularly and notifies all the threads when the status changes from one state to another? Or should I let each thread check for the internet-status itself? Q3. This issue should be a very common issue as every application accessing an internet should deal with this problem. So how other developers usually deal with this problem? Q4. If you could give me a reference to a good demo application that addresses this issue then it would greatly help me.

  Read the article

• How to create a snowstorm on your Windows desktop?

  - by Vilx-

  Practical uses aside, how (if it is possible at all) could you create a "snowing" effect on your desktop PC running Windows? Preferably with nothing but raw C/C++ and WinAPI. The requirements for the snow are: Appears over everything else shown; Snowflakes are small, possibly simple dots or clusters of a few white pixels; Does not bother working with the computer (clicking a snowflake sends the click through to the underlying window); Plays nicely with users dragging windows; Multimonitor capable. Bonus points for any of the following features: Snow accumulates on the lower edge of the window or the taskbar (if it's at the bottom of the screen); Snow accumulates also on top-level windows. Or perhaps some snow accumulates, some continues down, accumulating on every window with a title bar; Snow accumulated on windows gets "shaken off" when windows are dragged; Snow accumulated on taskbar is aware of the extended "Start" button under Vista/7. Snowflakes have shadows/outlines, so they are visible on white backgrounds; Snowflakes have complex snowflike-alike shapes (they must still be tiny). Most of these effects are straightforward enough, except the part where snow is click-through and plays nicely with dragging of windows. In my early days I've made an implementation that draws on the HDC you get from GetDesktopWindow(), which was click-through, but had problems with users dragging windows (snowflakes rendered on them got "dragged along"). The solution may use Vista/7 Aero features, but, of course, a universal solution is preferred. Any ideas? :)

  Read the article

• Is it still true, to make cross broswer layouts for desktop browsers using table+css is easier then

  - by metal-gear-solid

  My one of web designer friend still making sites with table but he use css very nicely and I also use css nicely but with <div> and i face cross browser problem in layout more than my friend. and i given some reason to my friend about cons of <table>. read my whole discussion with friend? I - you site will be problematic with screen reader My friend - OK, but i never got any call from any client regarding this. I - you will devote more time to make any changes in layout, if changes comes from client My friend - I don't think so, but if it is then show me how can i save time with <div>? I - your sites will not work well with search engine. My friend - it's not true. I've made many site and no problem with any site or client regarding this I - layout is old way, non w3c and non standard way. My friend - what is old and what is new, Who is W3C i don't know, What is standard? Whatever i make works in all browsers, it's enough for me and my client will not pay for standard and W3C guidelines rules I - Your site will not work in mobile browsers My friend - No problem for me, my client don't care about mobile phone I - Your sites are not accessible? My Friend - What do u mean not accessible? Whatever i make works in all browsers. my any client never asked about accessibility I - You will not get more work in future, with table? My friend - OK, no problem when clients will not accept site with table then i will learn about div based layouts in future. My questions? Is it still true, to make cross browser layouts for desktop browsers using table+css is easier then div+css? What is the benefit for developer to use DIV+CSS layout in place of <table> layouts if client would not mind if i use ?

  Read the article

• OS X not allowing me to rename a folder

  - by YGA

  Hi Folks, Can anyone thing of a reason why OS X would not allow me to do this? I seem to have total permissions... new-host-4:Desktop michael$ whoami michael new-host-4:Desktop michael$ ls -ltdr 2008_12_12/ drwxrwxrwx+ 5 michael wheel 170 Mar 28 18:23 2008_12_12/ new-host-4:Desktop michael$ mv 2008_12_12/ foo mv: rename 2008_12_12/ to foo: Permission denied new-host-4:Desktop michael$ Thanks! /YGA

  Read the article

• What are the pitfalls of hardlinked files on my desktop PC?

  - by MountainX

  All the identical-content files on my PC are now hardlinked. (My data is completely de-duplicated. It is a consequence of the way I copied my data from my old computer.) What pitfalls do I need to be aware of now that certain actions on one file could silently affect a number of other files? I know that deleting the file I'm working on is not a problem (assuming I deleted it on purpose). It doesn't affect any of the other hardlinked files and I don't see that the delete action would lead to unexpected side effects. Moving or renaming the file is not a problem. I don't see any unexpected consequences. I don't think copying hardlinked files is a problem, but I'm not as confident about any unexpected consequences in this regard. What I have seen is that making a copy (to the same disk) of a hardlinked file with cp keeps the copy hardlinked (i.e., inode number doesn't change in the copy). Copying to another filesystem obviously breaks the hardlink. (I guess one pitfall is forgetting this fact, given that my PC has 3 hard disks.) Changing permissions does affect all linked files. So far this has proven handy. (I made a large number of the hardlinked files read-only.) None of the operations above seem to produce any major unexpected consequences. However, as was pointed out to me by Daniel Beck in a comment, editing or modifying a file can sometimes be a problem. It depends on the tool and maybe the type of edit. (For example, editing small text files using sed seems to always break the link while using nano doesn't.) This introduces the chance that editing one file could affect all the hardlinked files (i.e., alter the original inode). My proposed solution to this is to make all hardlinked files read-only (and that is already mostly the case). If I can't do that for some files, I will unlink those particular files. Is there any problem with this read-only approach? I'm assuming that if I go to edit a file and find it to be read-only, I'll remember to unlink that filename while making it writable. So one pitfall might be forgetting this rule. In that case, I'll have to rely on my backups. Am I correct in the above statements? And what else do I need to know? BTW, I'm running Kubuntu 12.04. I'm also using btrfs. (I have 2 SSD's and 1 HDD in the PC. I will also be adding an external USB HDD. I'm also connected to a network and I mount some NFS shares. I don't assume any of these last bits are relevant to the question, but I'm adding them just in case.) BTW, since I have more than one drive (with separate file systems), to unlink any file all I have to do is copy it to another drive, then move it back. However, using sed also works (in my testing). Here's my script: sed -i 's/\(.\)/\1/' file1 Surprisingly, this even unlinks zero byte files. In my testing it also appears to work on non-text files without any special options. (But I understand that the --binary option might be needed on Windows, MS-DOS and Cygwin.) However, copying to another disk and moving back may be the best way to unlink. For my use-case, unlink command doesn't really "unlink", rather it "removes".

  Read the article

• How do I access the web server on my desktop from my laptop?

  - by Steven

  I'm running Apache on my stationary and I would like to access a website through my laptop. This is some of the Apache config: NameVirtualHost 127.0.0.1:80 <VirtualHost 127.0.0.1:80> ServerName mysite.com DocumentRoot I:/wamp/www/mysite/ </VirtualHost> ServerName localhost:80 <Directory /> Options FollowSymLinks AllowOverride all Order deny,allow Deny from all </Directory> On my laptop I've added the following to the HOSTS file: 10.0.0.3 mysite.com But accessing the page through mysite.com is not very successfull. If I enter the IP address directly, I only get a Forbidden message. What do I need to do in order to get this to work? Update I'm runing WAMPSERVER 2.1 (Apache 2.2.17) Apache is up and running I can ping 10.0.0.3 from laptop I'm not able to ping http://mysite.com from laptop IE gives me a 403 Forbidden - The website declined to show this webpage The only log that get's entries when trying to access the website from my laptop, is access.log. access.log 10.0.0.4 - - [13/Jun/2011:10:14:04 +0200] "GET / HTTP/1.1" 403 202 apache_error.log [Mon Jun 13 10:08:16 2011] [error] VirtualHost localhost:0 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results UPDATE 2 My apache config has the following entry: AllowOverride all Order Deny,Allow Deny from all Allow from 127.0.0.1 Could it be that this Allow from is stopping other computers accessing the page?

  Read the article

• Connecting a TV remote control to a Windows 7 Desktop?

  - by Craig Butikofer

  I was just wondering how possible it is to connect a remote control to a Windows 7 system. I’m connecting the computer to a 24" TV via HDMI to be used as a TV, playing things mainly through VLC. Clearly I don’t want to have to access the PC every time I want to change something. The problem is that I have no idea how to configure a remote to a PC, or even what remote will do the job. I’m not looking for anything overly flashy or in the $100-$200 range, but something that is functional and will get the job done.

  Read the article

< Previous Page | 182 183 184 185 186 187 188 189 190 191 192 193  | Next Page >