Search Results

Search found 12058 results on 483 pages for 'abstract syntax tree'.

Page 187/483 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

• key-words highlight in <textarea> (again)

  - by Halst

  Wait, I know! I know that this "syntax highlight in textarea"-question was raised like a million times on stackoverflow! But, please, listen. offtopic: I'm not a web-developer, and technically I'm not a programmer at all. I study mechatronics and deal mostly with control-engineering and digital-hardware. And I'm so pissed off that whenever I want to share some application (that would be helpful in my field) and embed it into the web, I need to know such a crazy amount of technologies, like html, css, javascript, flash, etc.. that takes time, which I could have been spending for the benefit of my own field. Right now I'm playing with hardware-description-languages and I'm writing some Python-libraries to convert one HDL into another. And I wanted to embed such feature on the web: http://xhdl2vhdl.appspot.com/ I wanted to implement some basic syntax highlighting (only keywords highlighting will be enough) so that the code could be readable. But the whole idea highlighting something in textarea is not trivial at all. The other difficulty is that the languages I work with are rare, and there are no out-of-box solutions for them. I tried to dig into these solutions, but they are very complicated for me: http://www.nicolarizzo.com/gamesroom/experimental/CodeEditor.html http://marijn.haverbeke.nl/codemirror/jstest.html and there is no clear descriptions how to use them (for my level of knowledge of web-development). So, is there a simple solution, just to highlight a bunch of key-words in textarea or perform something equivalent? Thank you.

  Read the article

• Java Scanner newline parsing with regex (Bug?)

  - by SEK

  I'm developing a syntax analyzer by hand in Java, and I'd like to use regex's to parse the various token types. The problem is that I'd also like to be able to accurately report the current line number, if the input doesn't conform to the syntax. Long story short, I've run into a problem when I try to actually match a newline with the Scanner class. To be specific, when I try to match a newline with a pattern using the Scanner class, it fails. Almost always. But when I perform the same matching using a Matcher and the same source string, it retrieves the newline exactly as you'd expect it too. Is there a reason for this, that I can't seem to discover, or is this a bug, as I suspect? FYI: I was unable to find a bug in the Sun database that describes this issue, so if it is a bug, it hasn't been reported. Example Code: Pattern newLinePattern = Pattern.compile("(\\r\\n?|\\n)", Pattern.MULTILINE); String sourceString = "\r\n\n\r\r\n\n"; Scanner scan = new Scanner(sourceString); scan.useDelimiter(""); int count = 0; while (scan.hasNext(newLinePattern)) { scan.next(newLinePattern); count++; } System.out.println("found "+count+" newlines"); // finds 7 newlines Matcher match = newLinePattern.matcher(sourceString); count = 0; while (match.find()) { count++; } System.out.println("found "+count+" newlines"); // finds 5 newlines

  Read the article

• Linq merging results

  - by glenneroo

  I'm working with a list within a list. This is how I'm currently searching: var tags = from fd in BigList from tag in fd.Tags where tag.Id == selectedTag.Id || tag.Id == ID.TIMESTAMP select new { fd.Name, tag.Id, tag.Value }; I then iterate over the result-set and remembering when Timestamp pops up for the next entry, needless to say this is sloppy and I'm positive there's a better way using Linq, I just can't seem to find the syntax. Here's some sample output (Id indicates what type of data is stored inside e.g. a timestamp): Name | Id | Value -----|----|---------- 0000 | 1 | <timestamp> 0000 | 2 | 1.2 ... 9999 | 1 | <timestamp> 9999 | 2 | 6.3 I need all instances where Id = selectedTag.Id. I just want 1 list with Name, Id, Value and Timestamp, but the problem is my above attempt returns 2 entries for every item (1 for timestamp and 1 for the value). Is there a way to do this using Linq? Preferably using query syntax! :)

  Read the article

• Migrate Data and Schema from MySQL to MSSQL

  - by colithium

  Are there any free solutions for automatically migrating a database from MySQL to MSSQL Server that "just works"? I've been attempting this simple (at least I thought so) task all day now. I've tried: MSSQL Server Management Studio's Import Data feature Create an empty database Tasks - Import Data... .NET Framework Data Provider for Odbc Valid DSN (verified it connects) Copy data from one or more tables or views Check 1 VERY simple table Click Preview Get Error: The preview data could not be retrieved. ADDITIONAL INFORMATION: ERROR [42000] [MySQL][ODBC 5.1 Driver][mysqld-5.1.45-community]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '"table_name"' at line 1 (myodbc5.dll) A similar error occurs if I go through the rest of the wizard and perform the operation. The failed step is "Setting Source Connection" the error refers to retrieving column information and then lists the above error. It can retrieve column information just fine when I modify column mappings so I really don't know what the issue is. I've also tried getting various MySql tools to output ddl statements that MSSQL understand but haven't succeeded. I've tried with MySQL v5.1.11 to SQL Server 2005 and with MySQL v5.1.45 to SQL Server 2008 (with ODBC drivers 3.51.27.00 and 5.01.06.00 respectively)

  Read the article

• gridview image column problem

  - by jame

  Work on vs05 C# asp.net .My SQL Syntax is :**** if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Images]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) drop table [dbo].[Images] GO CREATE TABLE [dbo].[Images] ( [ID] [numeric](18, 0) IDENTITY (1, 1) NOT NULL , [ImageName] [varchar] (50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL , [Image] [image] NULL ) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY] GO I want to show this Images table values in a grid view.....I do it ...but the image value can not show ....asp.net syntax for gridview is <asp:GridView ID="GridView2" runat="server" AutoGenerateColumns="False"> <Columns> <asp:BoundField DataField="ImageName" HeaderText="ImageName" /> <asp:TemplateField HeaderText="Image"> <EditItemTemplate> <asp:TextBox ID="TextBox1" runat="server" Text='<%# Eval("Image") %>'></asp:TextBox> </EditItemTemplate> <ItemTemplate> <asp:Image ID="Image1" runat="server" ImageUrl='<%# Eval("Image") %>' /> </ItemTemplate> </asp:TemplateField> </Columns> </asp:GridView> i write the below code on pageload event. i want images table values must shown when the page is load... string strSQL = "Select * From Images"; DataTable dt = clsDB.getDataTable(strSQL); this.GridView2.DataSource = dt; this.GridView2.DataBind(); Why not i get the image on my image column of the gridview.....what's the problem is how to solve?

  Read the article

• How do I interact with a Perl object that has a hash attribute?

  - by brydgesk

  I have a class with several variables, one of which is a hash (_runs): sub new { my ($class, $name) = @_; my $self = { _name => $name, ... _runs => (), _times => [], ... }; bless ($self, $class); return $self; } Now, all I'm trying to do is create an accessor/mutator, as well as another subroutine that pushes new data into the hash. But I'm having a hell of a time getting all the referencing/dereferencing/$self calls working together. I've about burned my eyes out with "Can't use string ("blah") as a HASH ref etc etc" errors. For the accessor, what is 'best practice' for returning hashes? Which one of these options should I be using (if any)?: return $self->{_runs}; return %{ $self->{_runs} }; return \$self->{_runs}; Further, when I'm using the hash within other subroutines in the class, what syntax do I use to copy it? my @runs = $self->{_runs}; my @runs = %{ $self->{_runs} }; my @runs = $%{ $self->{_runs} }; my @runs = $$self->{_runs}; Same goes for iterating over the keys: foreach my $dt (keys $self->{_runs}) foreach my $dt (keys %{ $self->{_runs} }) And how about actually adding the data? $self->{_runs}{$dt} = $duration; %{ $self->{_runs} }{$dt} = $duration; $$self->{_runs}{$dt} = $duration; You get the point. I've been reading articles about using classes, and articles about referencing and dereferencing, but I can't seem to get my brain to combine the knowledge and use both at the same time. I got my _times array working finally, but mimicking my array syntax over to hashes didn't work.

  Read the article

• Creating a Linq->HQL provider

  - by Mike Q

  Hi all, I have a client application that connects to a server. The server uses hibernate for persistence and querying so it has a set of annotated hibernate objects for persistence. The client sends HQL queries to the server and gets responses back. The client has an auto-generated set of objects that match the server hibernate objects for query results and basic persistence. I would like to support using Linq to query as well as Hql as it makes the queries typesafe and quicker to build (no more typos in HQL string queries). I've looked around at the following but I can't see how to get them to fit with what I have. NHibernate's Linq provider - requires using NHibernate ISession and ISessionFactory, which I don't have LinqExtender - requires a lot of annotations on the objects and extending a base type, too invasive What I really want is something that will generate give me a nice easy to process structure to build the HQL queries from. I've read most of a 15 page article written by one of the C# developers on how to create custom providers and it's pretty fraught, mainly because of the complexity of the expression tree. Can anyone suggest an approach for implementing Linq - HQL translation? Perhaps a library that will the cleanup of the expression tree into something more SQL/HQLish. I would like to support select/from/where/group by/order by/joins. Not too worried about subqueries.

  Read the article

• Pull specific information from a long list with Perl

  - by melignus

  The file that I've got to work with here is the result of an LDAP extraction but I need to ultimately get the information formatted over to something that a spreadsheet can use. So, the data is as follows: DataDataDataDataDataDataDataDataDataDataDataDataDataDataDataData DataDataDataDataDataDataDataDataDataDataDataDataDataDataDataData displayName: John Doe name: ##userName DataDataDataDataDataDataDataDataDataDataDataDataDataDataDataData DataDataDataDataDataDataDataDataDataDataDataDataDataDataDataData displayName: Jane Doe name: ##userName DataDataDataDataDataDataDataDataDataDataDataDataDataDataDataData DataDataDataDataDataDataDataDataDataDataDataDataDataDataDataData displayName: Ted Doe name: ##userName The format that I need to export to is: firstName lastName userName firstName lastName userName firstName lastName userName Where the spaces are tabs so I can then impor that file into a database. I have experience doing this in VBScript but I'm trying to switch over to using Perl for as much server administration as possible. I'm not sure on the syntax for what I want which is basically while not endoffile{ detect "displayName: " & $firstName & " " & $lastName detect "name: ##" & $userName write $firstName tab $lastName tab $userName to file } Also if someone could point me to a resource specifically on the text parsing syntax that Perl uses, I'd be very grateful. Most of the resources that I've come across haven't been very helpful.

  Read the article

• An online php debugger/code editor

  - by Zirak

  It's a simple deal: I'm sometimes in places where I don't have my laptop, and find myself with spare time and an idea for a project. But unfortunately, I can't do anything about it. I tried a variety of solutions, which include running IDEs (like phpstorm or Aptana) on a disc-on-key or cd (very slow and unappealing), trying several online solutions (like http://phpanywhere.net) and found that all of them are either buggy, overloaded or underloaded with features, just difficult to use, require FTP etc etc. All that is required here is a syntax highlighting and debugging alerts; no actual running of code. So the question is split into two: 1)Do you know of a good online php editor that you've used and enjoyed? 2)If no, then how would you go about making one? The second one seems a bit general, so I'll try and expand...It might be a good idea; if you can't find one, make one. The question is about the concept of making a syntax highlighter (shouldn't be too difficult), and the difficult part of catching php errors WITHOUT executing any php code. Thank you in advance.

  Read the article

• TicTacToe strategic reduction

  - by NickLarsen

  I decided to write a small program that solves TicTacToe in order to try out the effect of some pruning techniques on a trivial game. The full game tree using minimax to solve it only ends up with 549,946 possible games. With alpha-beta pruning, the number of states required to evaluate was reduced to 18,297. Then I applied a transposition table that brings the number down to 2,592. Now I want to see how low that number can go. The next enhancement I want to apply is a strategic reduction. The basic idea is to combine states that have equivalent strategic value. For instance, on the first move, if X plays first, there is nothing strategically different (assuming your opponent plays optimally) about choosing one corner instead of another. In the same situation, the same is true of the center of the walls of the board, and the center is also significant. By reducing to significant states only, you end up with only 3 states for evaluation on the first move instead of 9. This technique should be very useful since it prunes states near the top of the game tree. This idea came from the GameShrink method created by a group at CMU, only I am trying to avoid writing the general form, and just doing what is needed to apply the technique to TicTacToe. In order to achieve this, I modified my hash function (for the transposition table) to enumerate all strategically equivalent positions (using rotation and flipping functions), and to only return the lowest of the values for each board. Unfortunately now my program thinks X can force a win in 5 moves from an empty board when going first. After a long debugging session, it became apparent to me the program was always returning the move for the lowest strategically significant move (I store the last move in the transposition table as part of my state). Is there a better way I can go about adding this feature, or a simple method for determining the correct move applicable to the current situation with what I have already done?

  Read the article

• Programatically enable/disable menuBar buttons in Flex 4

  - by Hamid

  I have the following XML in my Flex4 (AIR) project that defines the start of my menu interface: <mx:MenuBar x="0" y="0" width="100%" id="myMenuBar" labelField="@label" itemClick="menuChange(event)"> <mx:dataProvider> <s:XMLListCollection> <fx:XMLList xmlns=""> <menu label="File"> <item label="New"/> <item label="Load"/> <item label="Save" enabled="false"/> </menu> <menu label="Help"> <item label="About"/> </menu> </fx:XMLList> </s:XMLListCollection> </mx:dataProvider> </mx:MenuBar> I am trying to find the syntax that will let me set the save button to enabled=true after a file has been loaded by clicking "Load", however I can't figure out the syntax, can someone make a suggestion please. Currently the way that button clicks are detected is by a Switch/Case testing the String result of the MenuEvent event.item.@label. Maybe this isn't the best way?

  Read the article

• macro collapse all in solution visual studio 2010

  - by rod

  Hi All, I found the CollapseAll macro online that has worked for me in vs2005 and vs2008. However, this half way works in vs2010. It looks like it only collapses the top nodes and not any subnodes that may be expanded? any ideas? Thanks, rod. Sub CollapseAll() ' Get the the Solution Explorer tree Dim UIHSolutionExplorer As UIHierarchy UIHSolutionExplorer = DTE.Windows.Item(Constants.vsext_wk_SProjectWindow).Object() ' Check if there is any open solution If (UIHSolutionExplorer.UIHierarchyItems.Count = 0) Then ' MsgBox("Nothing to collapse. You must have an open solution.") Return End If ' Get the top node (the name of the solution) Dim UIHSolutionRootNode As UIHierarchyItem UIHSolutionRootNode = UIHSolutionExplorer.UIHierarchyItems.Item(1) UIHSolutionRootNode.DTE.SuppressUI = True ' Collapse each project node Dim UIHItem As UIHierarchyItem For Each UIHItem In UIHSolutionRootNode.UIHierarchyItems 'UIHItem.UIHierarchyItems.Expanded = False If UIHItem.UIHierarchyItems.Expanded Then Collapse(UIHItem) End If Next ' Select the solution node, or else when you click ' on the solution window ' scrollbar, it will synchronize the open document ' with the tree and pop ' out the corresponding node which is probably not what you want. UIHSolutionRootNode.Select(vsUISelectionType.vsUISelectionTypeSelect) UIHSolutionRootNode.DTE.SuppressUI = False End Sub Private Sub Collapse(ByVal item As UIHierarchyItem) For Each eitem As UIHierarchyItem In item.UIHierarchyItems If eitem.UIHierarchyItems.Expanded AndAlso eitem.UIHierarchyItems.Count > 0 Then Collapse(eitem) End If Next item.UIHierarchyItems.Expanded = False End Sub End Module

  Read the article

• JavaScript Module Pattern - What about using "return this"?

  - by Rob

  After doing some reading about the Module Pattern, I've seen a few ways of returning the properties which you want to be public. One of the most common ways is to declare your public properties and methods right inside of the "return" statement, apart from your private properties and methods. A similar way (the "Revealing" pattern) is to provide simply references to the properties and methods which you want to be public. Lastly, a third technique I saw was to create a new object inside your module function, to which you assign your new properties before returning said object. This was an interesting idea, but requires the creation of a new object. So I was thinking, why not just use "this.propertyName" to assign your public properties and methods, and finally use "return this" at the end? This way seems much simpler to me, as you can create private properties and methods with the usual "var" or "function" syntax, or use the "this.propertyName" syntax to declare your public methods. Here's the method I'm suggesting: (function() { var privateMethod = function () { alert('This is a private method.'); } this.publicMethod = function () { alert('This is a public method.'); } return this; })(); Are there any pros/cons to using the method above? What about the others?

  Read the article

• Index an array expression directly in PostgreSQL

  - by wich

  I'm trying to insert data into a table from a template table. I need to rewrite one of the columns for which I wanted to use a directly indexed array expression, but I can't seem to find how to do this, if it is even possible. The scenario: create table template ( id integer, index integer, foo integer); insert into template values (0, 1, 23), (0, 2, 18), (0, 3, 16), (0, 4, 7), (1, 1, 17), (1, 2, 26), (1, 3, 11), (1, 4, 3); create table data ( data_id integer, foo integer); Now what I'd like to do is the following: insert into data select (array[3,7,5,2])[index], foo from template where id = 1; But this doesn't work, the (array[3,7,5,2])[index] syntax isn't valid. I tried a few variants, but was unable to get anything working and wasn't able to find the correct syntax in the docs, nor even whether this is at all possible or not. As a current workaround I've devised the following, but it is less than ideal, from an elegance perspective at least, but it may also be a performance hit, I haven't looked into that yet. insert into data select arr[index], foo from template, (select array[3,7,5,2] as arr) as q where id = 1; If anyone could suggest a (better) alternative to accomplish this I'd like to hear that as well.

  Read the article

• PostgreSQL: return select count(*) from old_ids;

  - by Alexander Farber

  Hello, please help me with 1 more PL/pgSQL question. I have a PHP-script run as daily cronjob and deleting old records from 1 main table and few further tables referencing its "id" column: create or replace function quincytrack_clean() returns integer as $BODY$ begin create temp table old_ids (id varchar(20)) on commit drop; insert into old_ids select id from quincytrack where age(QDATETIME) > interval '30 days'; delete from hide_id where id in (select id from old_ids); delete from related_mks where id in (select id from old_ids); delete from related_cl where id in (select id from old_ids); delete from related_comment where id in (select id from old_ids); delete from quincytrack where id in (select id from old_ids); return select count(*) from old_ids; end; $BODY$ language plpgsql; And here is how I call it from the PHP script: $sth = $pg->prepare('select quincytrack_clean()'); $sth->execute(); if ($row = $sth->fetch(PDO::FETCH_ASSOC)) printf("removed %u old rows\n", $row['count']); Why do I get the following error? SQLSTATE[42601]: Syntax error: 7 ERROR: syntax error at or near "select" at character 9 QUERY: SELECT select count(*) from old_ids CONTEXT: SQL statement in PL/PgSQL function "quincytrack_clean" near line 23 Thank you! Alex

  Read the article

• How to eliminate duplicate rows?

  - by Odette

  hi guys im back with my original query and i just have one question please (ps: I know i have to vote and regsiter and I promise I will do that today) With the following query (t-sql) I am getting the correct results, except that there are duplicates now. I have been reading up and think I can use the PARTITION BY syntax - can you please show me how to incorporate the PARTITION BY syntax? WITH CALC1 AS (SELECT OTQUOT, OTIT01 AS ITEMS, ROUND(OQCQ01 * OVRC01,2) AS COST FROM @[email protected] WHERE OTIT01 < '' UNION ALL ... SELECT OTQUOT, OTIT10 AS ITEMS, ROUND(OQCQ10 * OVRC10,2) AS COST FROM @[email protected] WHERE OTIT10 < '' ) SELECT OTQUOT, DESC, ITEMS, RN FROM ( SELECT OTQUOT, ITEMS, B.IXRPGP AS GROUP, C.OTRDSC AS DESC, COST, ROW_NUMBER() OVER (PARTITION BY OTQUOT ORDER BY COST DESC) AS RN FROM CALC1 AS A INNER JOIN @[email protected] AS B ON (A.ITEMS = B.IKITMC) INNER JOIN DATAGRP.GDSGRP AS C ON (B.IXRPGP = C.OKRPGP) ) T RESULTS: 60408169 FENCING GNCPDCTP18BGBG 1 60408169 FENCING CGIFESHPD1795BG 2 60408169 FENCING GTTCGIBG 3 60408169 FENCING GBTCGIBG 4 How do I get rid of the duplicates? thanks Bill and all the others for your help (I am still learning!)

  Read the article

• NoSQL for filesystem storage organization and replication?

  - by wheaties

  We've been discussing design of a data warehouse strategy within our group for meeting testing, reproducibility, and data syncing requirements. One of the suggested ideas is to adapt a NoSQL approach using an existing tool rather than try to re-implement a whole lot of the same on a file system. I don't know if a NoSQL approach is even the best approach to what we're trying to accomplish but perhaps if I describe what we need/want you all can help. Most of our files are large, 50+ Gig in size, held in a proprietary, third-party format. We need to be able to access each file by a name/date/source/time/artifact combination. Essentially a key-value pair style look-up. When we query for a file, we don't want to have to load all of it into memory. They're really too large and would swamp our server. We want to be able to somehow get a reference to the file and then use a proprietary, third-party API to ingest portions of it. We want to easily add, remove, and export files from storage. We'd like to set up automatic file replication between two servers (we can write a script for this.) That is, sync the contents of one server with another. We don't need a distributed system where it only appears as if we have one server. We'd like complete replication. We also have other smaller files that have a tree type relationship with the Big files. One file's content will point to the next and so on, and so on. It's not a "spoked wheel," it's a full blown tree. We'd prefer a Python, C or C++ API to work with a system like this but most of us are experienced with a variety of languages. We don't mind as long as it works, gets the job done, and saves us time. What you think? Is there something out there like this?

  Read the article

• How to calculate commision based on referred memebrs?

  - by RAJKISHOR SAHU

  Hello everybody, I am developing a small software in C# WPF for a consultancy which does chain system business. I have coded tree structure to show who referred whom. Now it has commission depending on level. If 1 referred 2 & 3 then 1 will get level-1 commission. If 2 referred 4, 5 & 3 referred 6, 7 then 1 will receive level-2 commission. This chain will go on to certain total number. My problem is how I would implement this logic; I am able to calculate who has referred how many members via UDF written for adding TreeViewItem to TreeView. Or tell me how I can count items in treeview in certain level? Node adding UDF: public void AddNodes(int uid, TreeViewItem tSubNode) { string query = "select fullname, id from members where refCode=" + uid + ";"; MySqlCommand cmd = new MySqlCommand(query, db.conn); MySqlDataAdapter _DA = new MySqlDataAdapter(cmd); DataTable _DT = new DataTable(); tSubNode.IsExpanded = true; _DA.Fill(_DT); foreach (DataRow _dr in _DT.Rows) { TreeViewItem tNode = new TreeViewItem(); tNode.Header = _dr["fullname"].ToString()+" ("+_dr["id"].ToString()+")"; tSubNode.Items.Add(tNode); if (db.HasMembers(Convert.ToInt32(_dr["id"].ToString()))) { AddNodes(Convert.ToInt32(_dr["id"]), tNode); } } //This line tracks who has referred how many members Console.WriteLine("Tree node Count : "+tSubNode.Items.Count.ToString()+", UID "+uid); } Help me PLEASE!!!!

  Read the article

• Best way to use PL/SQL Pacakge Cursors from Pro*C

  - by Greg Reynolds

  I have a cursor defined in PL/SQL, and I am wondering what the best way to use it from Pro*C is. Normally for a cursor defined in Pro*C you would do: EXEC SQL DECLARE curs CURSOR FOR SELECT 1 FROM DUAL; EXEC SQL OPEN curs; EXEC SQL FETCH curs INTO :foo; EXEC SQL CLOSE cusr; I was hoping that the same (or similar) syntax would work for a packaged cursor. For example, I have a package MyPack, with a declaration type MyType is record (X integer); cursor MyCurs(x in integer) return MyType; Now I have in my Pro*C code a rather unsatisfying piece of embedded PL/SQL that opens the cursor, does the fetching etc., as I couldn't get the first style of syntax to work. Using the example EXEC SQL EXECUTE DECLARE XTable is table of MyPack.MyType; BEGIN OPEN MyPack.MyCurs(:param); FETCH MyPack.MyCurs INTO XTable; CLOSE MyPack.MyCurs; END; END-EXEC; Does anyone know if there is a more "Pure" Pro*C approach?

  Read the article

• Perl - Using hashes in classes

  - by brydgesk

  I have a class with several variables, one of which is a hash (_runs): sub new { my ($class, $name) = @_; my $self = { _name => $name, ... _runs => (), _times => [], ... }; bless ($self, $class); return $self; } Now, all I'm trying to do is create an accessor/mutator, as well as another subroutine that pushes new data into the hash. But I'm having a hell of a time getting all the referencing/dereferencing/$self calls working together. I've about burned my eyes out with "Can't use string ("blah") as a HASH ref etc etc" errors. For the accessor, what is 'best practice' for returning hashes? Which one of these options should I be using (if any)?: return $self->{_runs}; return %{ $self->{_runs} }; return \$self->{_runs}; Further, when I'm using the hash within other subroutines in the class, what syntax do I use to copy it? my @runs = $self->{_runs}; my @runs = %{ $self->{_runs} }; my @runs = $%{ $self->{_runs} }; my @runs = $$self->{_runs}; Same goes for iterating over the keys: foreach my $dt (keys $self->{_runs}) foreach my $dt (keys %{ $self->{_runs} }) And how about actually adding the data? $self->{_runs}{$dt} = $duration; %{ $self->{_runs} }{$dt} = $duration; $$self->{_runs}{$dt} = $duration; You get the point. I've been reading articles about using classes, and articles about referencing and dereferencing, but I can't seem to get my brain to combine the knowledge and use both at the same time. I got my _times array working finally, but mimicking my array syntax over to hashes didn't work.

  Read the article

• PEAR:DB connection parameters

  - by Markus Ossi

  I just finished my first PHP site and now I have a security-related question. I used PEAR:DB for the database connection and made a separate parameter file for it. How should I hide this parameter file? I found a guide (http://www.kitebird.com/articles/peardb.html) that says: Another way to specify connection parameters is to put them in a separate file that you reference from your main script. ... It also enables you to move the parameter file outside of the web server's document tree, which prevents its contents from being displayed literally if the server becomes misconfigured and starts serving PHP scripts as plain text. I have now put my file in a directory like this /include/db_parameters.inc However, if I go to this URL, the web server shows me the contents of the file including my database username and password. From what I've understood, I should protect this file so, that even though PHP would be served as text, nobody could read this. What does outside of web server's document tree mean here? Put the PHP file out of public_html directory altogether deeper into the server file system? Some CHMOD?

  Read the article

• Java/JAXB: Accessing property of object in a list

  - by Mark Lewis

  Hello Using JAXB I've created a series of classes which represent my XML schema. Validating against the schema an XML file has thus become a 'tree' of java objects representing the XML. Now I'd like to access, delete and add an object of one the created types in my tree. If I've got classes' methods arranged like this: RootType class has: public List<FQType> getFq() { // and setter return fq; } FQType class has: public RemapType getRemap() { // and setter return remap; } RemapType class has: public String getSource() { // and setter return source; } What's the most concise way to code reading and writing of the 'source' member of a RemapType instance in an FQType instance with, say, fqtypeID=1, in an array of type RootType (in which RootType instances also each have rootID)? Currently I'm using a for loop Iterator in which is an if rootID = mySelectedRootID. In the if I nest a second for loop Iterator over the contained FQType instances and in that a second if fqTypeID = mySelectedFQTypeID. IE for loop iterator/if statement pairs to recognise the object of desire. With all the bells and whistles this way is nearly 15 lines of code to access a data type - can I do this in one line? Thanks

  Read the article

• how to use two count or more on one selecting statament ..?

  - by jjj

  i develop this code: SELECT COUNT(NewEmployee.EmployeeID), NewEmployee.EmployeeId,EmployeeName FROM NewEmployee INNER JOIN NewTimeAttendance ON NewEmployee.EmployeeID = NewTimeAttendance.EmployeeID and NewTimeAttendance.TotalTime is null and (NewTimeAttendance.note = '' or NewTimeAttendance.note is null ) and (month=1 or month =2 or month = 3) GROUP BY NewEmployee.EmployeeID, EmployeeName order by EmployeeID from my previous two question selecting null stuff and counting issue...that amazing code is working beautifully fine..but now i need to select more than one count... ...searched (google) .... found alias...tried: SELECT COUNT(NewEmployee.EmployeeID) as attenddays, COUNT(NewEmployee.EmployeeID) as empabsent , NewEmployee.EmployeeId,EmployeeName FROM NewEmployee INNER JOIN NewTimeAttendance ON empabsent =NewEmployee.EmployeeID = NewTimeAttendance.EmployeeID and NewTimeAttendance.TotalTime is null and (NewTimeAttendance.note = '' or NewTimeAttendance.note is null ) and (month=1 or month =2 or month = 3) , attenddays = NewTimeAttendance.EmployeeID and NewTimeAttendance.TotalTime is null and (NewTimeAttendance.note = '' or NewTimeAttendance.note is null ) and (month=1 or month =2 or month = 3) GROUP BY NewEmployee.EmployeeID, EmployeeName order by EmployeeID Incorrect syntax near '='. second try: SELECT COUNT(NewEmployee.EmployeeID) as attenddays, COUNT(NewEmployee.EmployeeID) as absentdays, NewEmployee.EmployeeId,EmployeeName FROM NewEmployee INNER JOIN NewTimeAttendance ON attenddays(NewEmployee.EmployeeID = NewTimeAttendance.EmployeeID and NewTimeAttendance.TotalTime is null and (NewTimeAttendance.note = '' or NewTimeAttendance.note is null ) and (month=1 or month =2 or month = 3)) , absentdays(NewEmployee.EmployeeID = NewTimeAttendance.EmployeeID and NewTimeAttendance.TotalTime is null and (NewTimeAttendance.note = '' or NewTimeAttendance.note is null ) and (month=1 or month =2 or month = 3)) GROUP BY NewEmployee.EmployeeID, EmployeeName order by EmployeeID Incorrect syntax near '='. not very good ideas... so ...help thanks in advance

  Read the article

• MySQL nested CASE error I need help with?

  - by AK

  What I am trying to do here is: IF the records in table todo as identified in $done have a value in the column recurinterval then THEN reset date_scheduled column ELSE just set status_id column to 6 for those records. This is the error I get from mysql_error() ... You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'CASE recurinterval != 0 AND recurinterval IS NOT NULL THEN SET date_sche' at line 2 How can I make this statement work? UPDATE todo CASE recurinterval != 0 AND recurinterval IS NOT NULL THEN SET date_scheduled = CASE recurunit WHEN 'DAY' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval DAY) WHEN 'WEEK' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval WEEK) WHEN 'MONTH' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval MONTH) WHEN 'YEAR' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval YEAR) END WHERE todo_id IN ($done) ELSE SET status_id = 6 WHERE todo_id IN ($done) END The following mySQL statement worked just fine before I revised like above. UPDATE todo SET date_scheduled = CASE recurunit WHEN 'DAY' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval DAY) WHEN 'WEEK' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval WEEK) WHEN 'MONTH' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval MONTH) WHEN 'YEAR' THEN DATE_ADD(date_scheduled, INTERVAL recurinterval YEAR) END WHERE todo_id IN ($done) AND recurinterval != 0 AND recurinterval IS NOT NULL

  Read the article

• Searching Natural Language Sentence Structure

  - by Cerin

  What's the best way to store and search a database of natural language sentence structure trees? Using OpenNLP's English Treebank Parser, I can get fairly reliable sentence structure parsings for arbitrary sentences. What I'd like to do is create a tool that can extract all the doc strings from my source code, generate these trees for all sentences in the doc strings, store these trees and their associated function name in a database, and then allow a user to search the database using natural language queries. So, given the sentence "This uploads files to a remote machine." for the function upload_files(), I'd have the tree: (TOP (S (NP (DT This)) (VP (VBZ uploads) (NP (NNS files)) (PP (TO to) (NP (DT a) (JJ remote) (NN machine)))) (. .))) If someone entered the query "How can I upload files?", equating to the tree: (TOP (SBARQ (WHADVP (WRB How)) (SQ (MD can) (NP (PRP I)) (VP (VB upload) (NP (NNS files)))) (. ?))) how would I store and query these trees in a SQL database? I've written a simple proof-of-concept script that can perform this search using a mix of regular expressions and network graph parsing, but I'm not sure how I'd implement this in a scalable way. And yes, I realize my example would be trivial to retrieve using a simple keyword search. The idea I'm trying to test is how I might take advantage of grammatical structure, so I can weed-out entries with similar keywords, but a different sentence structure. For example, with the above query, I wouldn't want to retrieve the entry associated with the sentence "Checks a remote machine to find a user that uploads files." which has similar keywords, but is obviously describing a completely different behavior.

  Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >