Search Results

Search found 14122 results on 565 pages for 'cable management'.

Page 187/565 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

• Can Current Backflow from Powered Hub's Adapter & cause PC Damage?

  - by SuperUserMan

  Getting this short: Can current flow from a powered USB hub's power adapter (lying 10 Meter away) back to computer via usb port and cause damage to Computer components like mobo, etc? What should be my concerns? Using a 2 Amp 5V Power adapter to power a 10m Long Active Repeater USB extension cable with 4 port HUB & plugging into PC's Front port, causes PC Chassis fan to keep running (thought slower than regular speed) Front Chassis HDD & power LED to turn on (though bit dim) may be other things which i cant detect/see at chip level, in motherboard?? All this even after PC is shut down (bit scary) More detail (in case still want to read): To run 4 High power (needing 450 mAmps) Wifi Adapters, far away from PC, Bought Active Repeater USB Extension Cable with 4 Ports & power port at far end http://www.ebay.com/itm/33FT-USB-2-0-Male-to-Female-Extension-Cable-Hub-Splitter-Adapter-with-4-USB-Port-/390846115254 Then added a locally bought 2 Amp 240V AC to 5V DC Power Adapter and plugged into USB hub which is a part of & situated at far end of a 10 Meter Active Repeater usb extension cable. Even 4 Wifi Adapters run fine (appear to) using this setup, but running chassis fan, dimly lighted Power & HDD LED, even when PC is switched off is bit scary and surely mean 5V & some current is flowing all though that 10 meter extension cable into my USB port & powering stuff. Can this cause damage? and what should be my concerns. Of course I can't switch off the power adapter (lying 10 meters away from PC) every time I switch off my PC to prevent this.

  Read the article

• How do I configure dual WAN links for failover on a Cisco 891?

  - by Donjo

  I have a Cisco 891 that is going to be connected to 2 WAN links, a DSL connection and a cable connection. I'm not so concerned with load balancing between them because the DSL connection speed is a drop in the bucket when compared to the cable speed though it would be nice if it worked that way. I mainly just want to force all traffic through the cable WAN link unless it goes down. I'm not really sure what feature set I should be researching.

  Read the article

• No HDMI audio - Windows 8 - ASUS H81M-PLUS

  - by Paul Wright

  I have an issue with HDMI audio on Windows 8 using an ASUS H81M-PLUS motherboard (without an external GFX card). There are many forum posts advising you to go into playback devices and setting HDMI to be default - I have done this. To eliminate what works and what doesn't work: I have not been able to get sound from my HDTV using HDMI. I have used this HDMI cable with my PS3, so this cable should be fine. I am able to use the HDMI cable in extended mode, so that I have two monitors (including the TV), just no audio. This HDMI cable goes straight from the motherboard to the TV. Below I have included 'Device manager', and 'Playback Devices' (Sound). Device Manager Playback Devices, showing disabled and disconnected devices I am at a loss. I have uninstalled all drivers, and then rebooted and made windows look for the correct ones, made sure the HDMI device was default. Thanks, Paul

  Read the article

• AMD Radeon 7900 series: setting up 3 monitors

  - by Nilzone-

  I have an AMD Radeon 7900 series, which should support up to 6 screens. I'm having problems getting my third one working. Im running windows 8, and have installed all the latest AMD drivers. My screens are: Samusng syncmaster S27D391HS Samusng syncmaster S24B350H Samusng syncmaster S24B350H The first 24" monitor I use HDMI to DVI cable. The second 24" I use VGA to DVI cable. Lastly, for the 27" I use HDMI cable. The result is, no matter what I do, I never get more than two screens on simultaneously. I have also tried getting a DisplayPort to HDMI cable to use for the 27", but Im not sure if it was passive or active (didn't say on the box, nor did I ask). So my question is: is an active displayport to HDMI the solution, or is there someting else Im overlooking? (I have read similar posts on this subject, but I use a slightly different combo of cables. That is why I made a post of my own as well)

  Read the article

• Create a wifi hotspot in a place where an authentication is required

  - by SoftTimur

  I live in a residence where Internet is provided via cable. Once the computer is connected to the cable, launching a browser will trigger an authentication, I have a username and password to enter, then the internet will be connected. With a gateway (e.g. Wireless Cable Voice Gateway Model CBVG834G) and 2 cables, two PCs can connect to the Internet with my account at the same time. Now the question is, I don't like the cable, and would like to create a wifi hotspot. It seems realizable with the same gateway. According to the instruction on page 2-4 of the manual: Enter http://192.168.0.1 in the address field of your Internet browser. Log in to the gateway with either of the default user names, MSO or admin... However, while connecting to the Internet successfully via cable and the gateway (e.g. google works), opening 192.168.0.1 oddly gives me an error on the browser: Does anyone know what happened? Is it due to the authentication required by my residence? Is there any other way to build a hotspot of wifi? PS: My system is MAC OS

  Read the article

• Cisco 877 as PPPoA/PPPoE bridge (no routing) - how to make it listen to IP for management?

  - by Ingmar Hupp

  I have a Cisco 877 configured to bridge ADSL with PPPoA to PPPoE on Vlan1. This works fine, but in this mode the only way I can configure the Cisco is via the serial console. I'd like to have the Cisco also listen on an IP address so I can telnet/ssh into it. I think the right way to go about this would be via bridge irb, but I'm not sure exactly how (or if that's even the right direction). IOS is 12.4T and my current config (cut down to essentials) is: no ip routing no ip cef ! ! interface ATM0 no ip address no ip route-cache no atm ilmi-keepalive pvc 0/38 encapsulation aal5snap ! dsl operating-mode auto bridge-group 1 ! ! interface Vlan1 no ip address no ip route-cache bridge-group 1 Just setting an IP address on Vlan1 didn't have the desired effect, but surely this must be possible somehow (the Draytek Vigor 120 even does it by default).

  Read the article

• How can I flush my ssh keys on power management activity?

  - by Sam Halicke

  Hi all, Using ssh-agent and private keys per the usual. Everything's working as normal. My question regards best practices on flushing keys from ssh-add on activity like sleep, suspend, hibernate, etc. I thought about writing a simple wrapper around those commands, but then wondered if are they even called? Or does the kernel initiate this activity directly? Are the PM utilities strictly userland? I would like this additional layer of security beyond locking my screen, etc. and was wondering if anyone else had solved this elegantly or has best practices to recommend. Thanks.

  Read the article

• Can I connect a Playstation 3's HDMI output to my monitor's DVI-D input? [migrated]

  - by HankJDoomstorm

  I'm attempting to connect my Playstation 3 to my computer monitor. The monitor has a DVI-D (dual link) input, so before distinguishing between the different DVI varieties, I bought a DVI-I (dual link) to HDMI converter that won't fit into the port on the monitor (not only that, there isn't enough physical space in the back of the monitor to fit that much stuff before it hits the bottom of it). So I grabbed a DVI-D (single link) cable and got a female-to-female DVI-I coupler, and plugged the DVI-D cable into the monitor and the whole mess of converters. The end result was HDMI to DVI-D single link, but my monitor isn't receiving a signal on its digital channel. (For clarity's sake: DVI-D DL input on Monitor, DVI-D SL cable, DVI-I DL female-to-female coupler, DVI-I DL to HDMI converter, HDMI output on PS3) I don't know much about this stuff (obviously), but my educated guess is that the bandwidth of the PS3 is too high for the DVI-D Single Link cable, so nothing's getting through. Will replacing the single link cable with dual link resolve this? If not, is it possible at all? Oh, I should mention I'm aware I won't get audio through the monitor. I have an RCA to 3.5mm converter for that.

  Read the article

• SQL 2008: How can i create policies in policy based management from tsql script?

  - by Manjot

  Hi, I have some T-sQL scripts which i want use to create policies in SQL 2008. But every documentation i found explains creating policies from in build facets. when I try to create a policy using these scripts, I get error "property expressionNode is not set". any help?

  Read the article

• Does Cisco anyconnect replace original network connection session?

  - by Stan

  When using Cisco anyconnect VPN, it seems the existing network connection is still going through old connection session (Is there any way to find out)? The reason is because when using Cisco VPN client connect to gateway, usually the Messenger Live, Skype will be disconnected and requires to reconnect. But using anyconnect doesn't need to reconnect. So I am guessing if those old sessions still go through original network connection. Which means, both connection is existing at the same time. Take my case for example: connection 1: wireless NIC - cable modem - my cable ISP - internet connection 2: anyconnect - wireless NIC - cable modem - my cable ISP - VPN gateway - internet Am I correct? Is there any way to check this? Thanks.

  Read the article

• Cobbler 2.2.2 problems

  - by Peter

  I have setup a dedicated LAN for Cobbler tests. My setup is: Cobbler server: openSUSE 12.3, cobbler 2.2.2 (from openSUSE repos) Imported distros: Centos 6.5, Red Hat 6.5, Red Hat 7.0, openSUSE 13.1 Target Machine: VMs in a Windows 7 Virtualbox Systems provisioning works OK, but I have some problems. The first one is that cobbler does not honor the "pxe_just_once: 1" setting. When the setup of the target OS is finished, after the reboot the target systems continues to PXE boot! The second problem is that the target server is not correctly configured! See my setup: cobbler system report --name=test Name : test TFTP Boot Files : {} Comment : Fetchable Files : {} Gateway : 192.168.0.1 Hostname : testcob1.example.com Image : IPv6 Autoconfiguration : False IPv6 Default Device : Kernel Options : {} Kernel Options (Post Install) : {} Kickstart : <<inherit>> Kickstart Metadata : {} LDAP Enabled : False LDAP Management Type : authconfig Management Classes : [] Management Parameters : <<inherit>> Monit Enabled : False Name Servers : ['192.168.0.1', '8.8.8.8'] Name Servers Search Path : [] Netboot Enabled : False Owners : ['admin'] Power Management Address : Power ID : Power Password : Power Management Type : ipmitool Power Username : Profile : RHEL-6.5-x86_64 Proxy : <<inherit>> Red Hat Management Key : <<inherit>> Red Hat Management Server : <<inherit>> Repos Enabled : False Server Override : <<inherit>> Status : testing Template Files : {} Virt Auto Boot : <<inherit>> Virt CPUs : <<inherit>> Virt Disk Driver Type : <<inherit>> Virt File Size(GB) : <<inherit>> Virt Path : <<inherit>> Virt RAM (MB) : <<inherit>> Virt Type : <<inherit>> Interface ===== : eth0 Bonding Opts : Bridge Opts : DHCP Tag : DNS Name : Master Interface : Interface Type : IP Address : 192.168.0.200 IPv6 Address : IPv6 Default Gateway : IPv6 MTU : IPv6 Secondaries : [] IPv6 Static Routes : [] MAC Address : Management Interface : True MTU : Subnet Mask : 255.255.255.0 Static : True Static Routes : [] Virt Bridge : So, although I have setup the hostname and the network interface of the target system, after the setup, the hostname is set to localhost.localdomain and eth0 is configured as a DHCP not static! How can I find the problem and fix it? Note that I have synced and restarted cobbler a couple of times, but the problems persists.

  Read the article

• Wrong screen resolution with HDMI output to HDTV

  - by bruno077

  I own an HDTV with a native resolution of 1360x768. Sometimes I plug in my laptop to watch movies, and I used to do it with a VGA cable. I've had no problem setting the laptop to the TV native resolution with the VGA cable (1360x768). Having acquired an HDMI cable recently, I can't go past 1280x720, and if I do, the TV displays "invalid format". At 1280x720, the image is viewable but not centered, so for example I can't see the windows taskbar or titlebars. I've tried both cables (VGA and HDMI) with the same settings: Laptop's display turned off and trying to set the Tv's native resolution. What could I try to fix this issue? Could it be a faulty cable? (I'm using a Thinkpad with Windows 7) EDIT: My graphics adapter appears listed as Mobile Intel(R) 4 Series Express Chipset Family (Searching for my laptop's model yields Intel GMA 4500MHD as the graphic card) I'm downloading a driver update from Intel's website. I'll report my progress when I check its behavior tomorrow.

  Read the article

• Computer never connects to the internet automatically on startup?

  - by RawR Crew

  I have my Windows Vista laptop connected directly to the router via an ethernet cable, and every time I switch the computer on, the computer cannot connect to the internet. It comes up as limited or no connectivity, I am assuming because it has not been assigned an IP address by the router - not too sure if this is right. The problem is usually fixed either by performing a repair through the networking control panel or removing and re-inserting the ethernet cable. It will also connect without doing any of these if the computer is left idle for about 20 minutes. It will connect fine wirelessly without the need for any of this, however I would prefer to connect via the cable. Any ideas how I can fix this? I have replaced the ethernet cable and router already (identical model) but these haven't helped. Thanks for any help on this.

  Read the article

• Is it possible to open an Active Director or Exchange Management Console user dialog directly from Powershell?

  - by Myrddin Emrys

  I'd like to be able to launch either the AD user dialog, or the EMC mailbox dialog directly from a Powershell script to open a specific user. The workflow goes something to the effect of "Does everything look correct on this user? Y/N" to continuing on, or to bringing up the account to edit. There's no reason to completely duplicate the functionality of these dialogs. I don't mind requiring that EMC or ADU&C already be open before the script is run, if necessary.

  Read the article

• Why is my Mac not displaying anything to my LCD tv using HDMI?

  - by Pure.Krome

  Hi folks, I've got an iMac desktop computer. Love it. I wish to connect it to my LCD TV using HDMI. There is no HDMI output on the iMac so i had to buy one of these bad boys :- so now I can output video (via the mini Display Port) and sound (via USB) through this box, to my LCD. Works great ... with a single direct cable. I have another 3 or 5 metre cable inserted into my wall, so i do not have to have a silly hdmi cable floating in the air between my iMac and my LCD TV. When I do this, there is no picture. To better explain all of this, i made a quick video explaining my problem in detail, so you can exactly see what is going on/wrong. I've also tried changing the output format for the TV from 1080i down to 720p and even lower .. incase the cable in the wall doesn't allow 1080i. here's the video with the full explanation :- http://www.youtube.com/watch?v=ZkKRKnRIh6Q (NOTE: I incorrectly said in the video that the hidden wall cable is 10 metres long. me == fail. It's 3m or 5m...). Can someone please watch it and suggest some ideas to getting it working?

  Read the article

• PCI Tv Tuner not receiving signal

  - by C-dizzle

  I inherited an Angel II PCI Dual TV Tuner card, popped it into my computer's PCI slot, plugged in my coax cable, but am having trouble getting any type of signal to it. The computer I am using is Windows 7 Ultimate 32 bit, I know the card works because the computer recognizes it and installs the drivers, or at least I assume it works because of that. I'm trying to use Windows Media Center to watch/record tv. Here are a few things I have tried to get it working: Uninstalled/Reinstalled the newest drivers Tried hooking up an antenna to the coax input instead of my cable Instead of using cable splitter, went directly from wall output into card with coax cable Tried using different output on splitter in case the out port was bad I haven't tried a different coax cable yet, it should be fine since it's pretty new. Since this is my first time setting up a TV Tuner card, is there anything specific that I need to do with it? Is there any configuration that needs to be done on it? Do I need to have a digial receiver? I was getting pretty frustrated with it so I wanted to turn here to the experts, I'm sure someone can help me figure it out.

  Read the article

• Simple, centralized user management on a small LAN - NIS or LDAP?

  - by einpoklum

  I'm setting up a small LAN for my team. It will, for all intents and purposes, not be connected to any external networks. I would it to have centralized control of user accounts (at least, I think I'd like that; I'm also considering using puppet, so theoretically I could just push /etc/passwd changes, or something). The number of machines is fixed, but not very small. Mostly they're 'attached' to a single user, but sometimes people work remotely on someone else's box; and there are a couple of servers. I've read this question, but my scenario is much simpler (even simpler than in this question) and I'd like to do something (relatively) quick, with not much hassle, but not a dirty totally-insecure hack. Is NIS relevant for my scenario? If not, what's the most hassle-free way to set up LDAP (or LDAP+Kerberos) to achieve the same? Notes: I have no experience with setting up either NIS or LDAP. We use Debian-flavored Linux distributions, mainly Kubuntu 12.04 (not my choice, but that's the way it is).

  Read the article

• Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose? [migrated]

  - by Moshev

  I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

  Read the article

• Suggestion for live video stream aggregation/switching/forwarding/management software?

  - by deceze

  I'm looking for a software or system that can receive video streams from a number of cameras via a network (RTMP or similar protocol), present a visual overview of all video streams and allow me to forward/send a selected stream to another service (e.g. to a Flash Media Server, or anywhere via RTMP). Basically the digital internet equivalent of a TV studio control panel, which allows a director to put together a live show. Is there any such software at an affordable price? A GUI-less server which can be scripted to switch streams would be good too. I'm not even quite sure what kind of product category this falls into or what search terms to plug into Google. Most results I have come up with have little more than an executive summary description which doesn't tell me anything. Any suggestion welcome.

  Read the article

• Windows 7 Media Center: sometimes no sound on a TV channel

  - by torbengb

  Problem Sometimes, recorded TV shows have no sound. This is of course very annoying because the recorded show is worthless. Also, when switching channels while watching live TV, sometimes a channel has no sound. This is always solved by switching channel again and then back (most often, once will do the trick). Media Center doesn't do this trick by itself when recording of course, so that's the bigger issue - but the cause is certainly the same. Details The computer is running a newly installed Windows 7 and Windows Media Center. It has 2 different tuner-cards installed. Both are installed with signed and up-to-date Win7 drivers and appear OK in Device Manager. Both tuners get the same antenna signal, from a split cable from the wall. The cable delivers analog cable TV (40+ channels) and digital cable TV (4 channels) at the same time. Both tuners have been configured to receive both analog and digital channels. This only happens with analog channels. How can I fix the no-sound problem? Update: I've now spent some time with the computer to try and pinpoint the problem, but I've had little success so far: I flipped through the channels until one didn't have sound, then I disconnected the antenna cable from one of the tuners. It was the right one because then the video also went away. I flipped lots more channels to see if the other card also would come up mute once but I never had a channel without sound. It might still be possible, I don't know. Then I disconnected the "good" tuner and connected the "bad" tuner and again flipped lots of channels but again I never had a channel without sound. It seems to me that the problem is erratic. It happens on any channel, and I haven't ruled out yet that it only happens on one tuner.

  Read the article

• Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose?

  - by Moshev

  I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

  Read the article

• What is the correct approach i should use for an application that requires amazon S3 uploads and SimpleDB data management?

  - by Luis Oscar

  I am developing an application for iOS and that is going smoothly, the problem is that I am very new at server sided things. I am totally confused about how to correctly use Amazon Web Services for this purpose. What I want to do is very simple. I want my application to be able to query a servlet hosted in EC2 to be able to retrieve pictures and data based on some criteria from S3 and SImpleDB respectively. Also the application should be able to upload pictures into a S3 bucket and register the information in the SImpleDB. My main concerns are security and costs, So far i was using Amazon Token Vending Machine but I haven't been successful when trying to customize it, and while researching I discovered that on the long run it is very expensive. The ultimate goal is to handle a "social" picture service for my iOS application. Being able to register new users, authenticate these users. See what permissions they have to which pictures from the bucked. And all this without having to worry about Third party people from accessing the private pictures of my users. Sorry for this question but I am really clueless about how to handle this... I have tried reading many articles but all these server stuff looks very scary.

  Read the article

• Where do I find a free (open source preferably) VNC management tool?

  - by thenior

  Hello, I am trying to get remote internal setup for our business. Basically, I just want to remote desktop into any computer on the network. I don't want to use LogMein, because I only want it to be internal for security. Basically, I am looking for a way to just install VNC clients on all the machines, and on my machine have centralized manager for all the machines that are connected to it. Doesn't have to VNC - just needs to work and be free. All systems running Win 7 64bit

  Read the article

• How can I shrink my Windows partition further than the disk management is allowing?

  - by Walkerneo

  I just bought a new computer with a 2tb hard drive that has only a single partition. I would like to divide this into at least 4 partitions, but when I try to shrink the current partition, it says the total size is 1888171 MB and that the size of available shrink space is only 939075 MB. The used disk space is at 40gb right now - why can't shrink it to somewhere around that? I read here: http://www.howtogeek.com/howto/windows-vista/working-around-windows-vistas-shrink-volume-inadequacy-problems/ that this is because of unmovable system files. I doubt this is the only problem though. I would like to get this partition down to 500gb. How can I do this?

  Read the article

• Connecting to a 2.5" laptop drive using USB

  - by user27449

  So I swapped my MBP hard drive with a SSD drive, and I want to connect to my old hard drive. I bought a nextstar 3 external 2.5" drive enclosure that has a USB 2.0 interface. I watched an online video of an older version of the enclosure, and in the video they had a ATA cable to connect to the drive. My enclosure didn't come with anything like that, and there doesn't seem to be a way to connect to my drive (my old drive is a seagate 500gb momentus 7200 RPM). My laptop is about 2 years old now (MBP 17"). The drive doesnt' have pins to connect, it has a wide plug type connector, and a USB connector also (I was able to directly plugin the USB cable to the drive, but didn't connect it to my computer, was just testing thigns out). Is it safe for me to directly connect the cable that came with the enclosure to the drive, and then connect the other end to my computer? Does this single cable provide power and data transfer?

  Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >