Search Results

Search found 8731 results on 350 pages for 'l core'.

Page 187/350 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

  • Add a small RAID card? Will it help overall stability and performance of my nine hard drives?

    - by Ray
    Hi, Will I get any extra genuine added performance and RAID stability if I insert a basic RAID card into a PCI-E x1 slot? I am considering the Adaptec 1220SA - 2 port SATA , pci-express (1x) , raid 0/1. Ok it only supports two SATA drives. Purpose is to help support the eight internal hard drives (1TB each), a DVD drive and an external e-SATA connected 2TB hard drive - by dealing with two of the internal hard drives. My current configuration of eight internal 1TB Barracuda (7200.12) SATA hard drives, one external 2TB SATA Western Digital Green Drive (e-SATA) and one DVD drive can already be supported by the Intel P55 & JMicron controllers on the ASUS motherboard : the Intel P55 (controls six HDD; configured as three x RAID 1), and the JMicron (controls two HDD as one RAID 1, as well as the DVD drive and the external SATA drive via the motherboard's e-SATA port (controlled by the JMicron)). Bigger picture details : I have an ASUS motherboard designed for the LGA1156 type processor and it includes the Intel P55 Express Chipset and JMicron. I am using the Intel Core i7-870 processor, and have 8GB DDR3 (1333) memory (four x 2GB Corsair DIMMs). Enough overall power. The power supply is more than sufficicient for the system. Corsair AX850. The system will never need the full 850 watts (future : second graphics card). The RAID card would provide hardware RAID 1 for two of the eight intrnal drives. It would either reduce the load on : the Intel P55 firmware RAID support, or replace the JMicron controller's RAID 1 set. I am busy installing the above configuration using Windows 7 Ultimate 64-bit as the OS. The RAID card is a last minute addition to the plan. Is it worth spending the extra R700 - R900 on the Adaptec 1220SA, or equivalent RAID card? I cannot afford to spend yet another R2000 - R3000 on a RAID card that would support many SATA2 hard drives, with a better RAID, example the RAID 5. My Issue & assumption : I am trusting that the Intel P55 chipset can properly handle six drives, configured as three * RAID 1. I am assuming that the JMicron can handle, using its RED SATA ports, one RAID-1 (two HDDs). The DVD drive connects to the JMicron optical SATA port 1 (white port 1). White port 2 is not used. The e-SATA connection is from the JMicron straight to, and through the motherboard - to an on-board (rear panel) e-SATA port. Am I being a little hopeful in only using the on-board Intel P55 and the JMicron? Is it a waste of money to install a RAID card that handles two SATA2 drives? OR Is it wisdom to take the pressure a little off the Intel P55? Obviously I am interested in data security, hence RAID 1, not RAID Zero. RAID 5 would be nice. The CPU, Intel Core i7-870 will provide the clout. Context to nine drives : I am using virtualisation with Windows 7 Ultimate. Bootable VMs. The operating system gets a mirror. Loaded apps gets a mirror. The current design data is kept in another mirror and Another mirror is back-up one and / or VM territory. Then the external 2TB drive (via e-SATA) is the next layer of data security and then finally, I use off-site data security. Thanks.

    Read the article

  • How to install pip/easy_install on debian 6 for python3.2

    - by atomAltera
    I'm trying to install pip or setup tools form python 3.2 in debian 6. First case: apt-get install python3-pip...OK python3 easy_install.py webob Searching for webob Reading http://pypi.python.org/simple/webob/ Reading http://webob.org/ Reading http://pythonpaste.org/webob/ Best match: WebOb 1.2.2 Downloading http://pypi.python.org/packages/source/W/WebOb/WebOb-1.2.2.zip#md5=de0f371b46554709ce5b93c088a11cae Processing WebOb-1.2.2.zip Traceback (most recent call last): File "easy_install.py", line 5, in <module> main() File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 1931, in main with_ei_usage(lambda: File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 1912, in with_ei_usage return f() File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 1935, in <lambda> distclass=DistributionWithoutHelpCommands, **kw File "/usr/local/lib/python3.2/distutils/core.py", line 148, in setup dist.run_commands() File "/usr/local/lib/python3.2/distutils/dist.py", line 917, in run_commands self.run_command(cmd) File "/usr/local/lib/python3.2/distutils/dist.py", line 936, in run_command cmd_obj.run() File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 368, in run self.easy_install(spec, not self.no_deps) File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 608, in easy_install return self.install_item(spec, dist.location, tmpdir, deps) File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 638, in install_item dists = self.install_eggs(spec, download, tmpdir) File "/usr/lib/python3/dist-packages/setuptools/command/easy_install.py", line 799, in install_eggs unpack_archive(dist_filename, tmpdir, self.unpack_progress) File "/usr/lib/python3/dist-packages/setuptools/archive_util.py", line 67, in unpack_archive driver(filename, extract_dir, progress_filter) File "/usr/lib/python3/dist-packages/setuptools/archive_util.py", line 154, in unpack_zipfile data = z.read(info.filename) File "/usr/local/lib/python3.2/zipfile.py", line 891, in read with self.open(name, "r", pwd) as fp: File "/usr/local/lib/python3.2/zipfile.py", line 980, in open close_fileobj=not self._filePassed) File "/usr/local/lib/python3.2/zipfile.py", line 489, in __init__ self._decompressor = zlib.decompressobj(-15) AttributeError: 'NoneType' object has no attribute 'decompressobj' Second case: from http://pypi.python.org/pypi/distribute#installation-instructions python3 distribute_setup.py Downloading http://pypi.python.org/packages/source/d/distribute/distribute-0.6.28.tar.gz Extracting in /tmp/tmpv6iei2 Traceback (most recent call last): File "distribute_setup.py", line 515, in <module> main(sys.argv[1:]) File "distribute_setup.py", line 511, in main _install(tarball, _build_install_args(argv)) File "distribute_setup.py", line 73, in _install tar = tarfile.open(tarball) File "/usr/local/lib/python3.2/tarfile.py", line 1746, in open raise ReadError("file could not be opened successfully") tarfile.ReadError: file could not be opened successfully Third case: from http://pypi.python.org/pypi/distribute#installation-instructions tar -xzvf distribute-0.6.28.tar.gz cd distribute-0.6.28 python3 setup.py install Before install bootstrap. Scanning installed packages No setuptools distribution found running install running bdist_egg running egg_info writing distribute.egg-info/PKG-INFO writing top-level names to distribute.egg-info/top_level.txt writing dependency_links to distribute.egg-info/dependency_links.txt writing entry points to distribute.egg-info/entry_points.txt reading manifest file 'distribute.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' writing manifest file 'distribute.egg-info/SOURCES.txt' installing library code to build/bdist.linux-x86_64/egg running install_lib running build_py copying distribute.egg-info/PKG-INFO -> build/bdist.linux-x86_64/egg/EGG-INFO copying distribute.egg-info/SOURCES.txt -> build/bdist.linux-x86_64/egg/EGG-INFO copying distribute.egg-info/dependency_links.txt -> build/bdist.linux-x86_64/egg/EGG-INFO copying distribute.egg-info/entry_points.txt -> build/bdist.linux-x86_64/egg/EGG-INFO copying distribute.egg-info/top_level.txt -> build/bdist.linux-x86_64/egg/EGG-INFO creating 'dist/distribute-0.6.28-py3.2.egg' and adding 'build/bdist.linux-x86_64/egg' to it Traceback (most recent call last): File "setup.py", line 220, in <module> scripts = scripts, File "/usr/local/lib/python3.2/distutils/core.py", line 148, in setup dist.run_commands() File "/usr/local/lib/python3.2/distutils/dist.py", line 917, in run_commands self.run_command(cmd) File "/usr/local/lib/python3.2/distutils/dist.py", line 936, in run_command cmd_obj.run() File "build/src/setuptools/command/install.py", line 73, in run self.do_egg_install() File "build/src/setuptools/command/install.py", line 93, in do_egg_install self.run_command('bdist_egg') File "/usr/local/lib/python3.2/distutils/cmd.py", line 313, in run_command self.distribution.run_command(command) File "/usr/local/lib/python3.2/distutils/dist.py", line 936, in run_command cmd_obj.run() File "build/src/setuptools/command/bdist_egg.py", line 241, in run dry_run=self.dry_run, mode=self.gen_header()) File "build/src/setuptools/command/bdist_egg.py", line 542, in make_zipfile z = zipfile.ZipFile(zip_filename, mode, compression=compression) File "/usr/local/lib/python3.2/zipfile.py", line 689, in __init__ "Compression requires the (missing) zlib module") RuntimeError: Compression requires the (missing) zlib module zlib1g-dev installed Help me please

    Read the article

  • Windows 7 sometimes boots in VGA mode

    - by TuxRug
    I have an Asus G50VT-x5 laptop with nVidia GeForce9800M-GS graphics. Normally, Windows boots normally, but about 20% of the time (rough estimate), it will boot with the fallback VGA driver, maxing out at 800x600 with no Aero. I've checked the system logs and there is nothing indicating an error loading the nVidia driver. It even specifies in the logs that the Nvidia Display Driver service started successfully, even though it has booted in safe graphics mode. This has been happening for a while, but it's happening a little more often now than it was before. Since the first time my system exhibited this behavior, I have updated my graphics driver a handful of times. I used System Information for Windows to check for problems there, but the only thing that stood out was the following: Core Temperature 4486449 °C (8075639 °F) Shaders Temperature 1171513530 °C (2108724330 °F) I know this reading is incorrect, because my laptop is nowhere near the surface of the sun and my desk has not burst into flames. When it's opererating normally, I get a sane reading like [Core Temperature 58 °C (136 °F)] with no Shaders Temperature listed. All I have to do to resolve the issue is reboot. I have seen no stability issues with the graphics or anything else. A long time ago, I had an issue with this computer where my framerate would suddenly drop during a 3D game from 40fps to <1fps, but after looking at the temperature readout immediately after quitting a game, I removed the bottom panel and blew the dust out of the vent and heatsink. Since then I have no drops in framerate under any situation. I have uploaded a zip containing the SIW reports for when the problem is occurring and when the computer is operating normally. I don't have a paid account so it can only be downloaded 10 times, so please only download the reports if you think you can use them. If you try to download the reports and they are no longer available, please comment and I will re-upload them. If you want to look at the files, they are on Rapidshare. EDIT It happened again, and I looked a little deeper into the System logs. When this happens, there are a lot of errors about other device drivers unable to start. All of these errors are for PnP drivers. Also, my USB keyboard and mouse take a few moments before they actually start working, although this happens sometimes the first normal boot as well. I am quite sure this is related, so I am adding the pnp tag. Also, CHKDSK will not run on boot. Even if a check is scheduled or a volume is manually set as dirty, CHKDSK will be skipped entirely, not even leaving an entry in the System logs. I tried running CHKNTFS /D, which did not work. I then manually changed my HKLM\System\CurrentControlSet\Control\Session Manager BootExecute value to the default listed on Microsoft's website. That did not work either. I ended up booting to repair mode and running CHKDSK there, which found a number of minor inconsistencies on my system drive, but none on my data drive. I have no idea if this is related. Some more information for those who don't download my SIW report file: Antivirus and Firewall are ESET Smart Security I have three different virutalization programs installed: VMware Player, Windows Virtual PC, and VirtualBox. The network adapters for these show up in the log of failed device starts. EDIT 2 I tried running sfc /scannow, which reported that it found corrupted files that could not be fixed. The CBS log is extremely cryptic. I tried booting to my install disk, launching repair mode, and doing an offline sfc from there, which produced the same result.

    Read the article

  • what is the best mid/high-end class audio/music creation audio sound card?

    - by Chris
    Hello, I have a computershop myself, and I repair computers. But one of the things I really don't know (yet) is the performace od audio cards for music creation with midi. I have searched and searched and came up with some good reviews, but after browsing for a couple of hours I could't see the trees trough the forrest :-D (it's a dutch expression) At one moment I thought the M-Audio - Delta 1010LT would be a good PCIe card, later on I read that this card was released years ago. (but that could be false information) Also any personal expierence would be great, but not necessairy. I have searched a few cards, and I hope someone can help me make a choice for a friend of mine. He's buget is between $100 and $350 I know there are audio cards from $ 500 - $1850,- this is just too expensive. The following specs are crucial: ASIO Midi Mic in minimal 5.1, 7.1 recommended it's not for airplay, but just to compose music at home. using Ableton and midi keyboard. 1. M-Audio - Delta 1010LT: 8 x 8 analog I/O 2 mic preamps or line inputs S/PDIF digital I/O (coaxial) with 2-channel PCM SCMS copy protection control digital I/O supports surround-encoded AC-3 and DTS pass-through 1 x 1 MIDI I/O directly drive up to 7.1 surround (bass management software included) software controlled 36-bit internal DSP digital mixing/routing +4dbu/-10dBV operation individually switched in software word clock I/O for sample accurate device synchronization 2. RME HDSP 9632: * Stereo Analog Ein- und Ausgang, symmetrisch*, 24-Bit/192kHz, > 110 dB SNR * Optionale Erweiterungsboards mit je 4 symmetrischen Ein- und Ausgängen * Alle analogen I/Os voll 192 kHz-fähig, also keine Reduzierung der Kanalzahl * 1 x ADAT Digital In/Out, 96 kHz-fähig (S/MUX) * 1 x SPDIF Digital In/Out, 192 kHz-fähig * 1 x Breakout Kabel für koaxialen SPDIF-Betrieb* * Also bis zu 16 Ein-und Ausgänge gleichzeitig nutzbar! * 1 x Stereo Kopfhörerausgang, parallel zum analogen Ausgang, aber eigene Pegelanpassung * 1 x MIDI I/O für 16 Kanäle Hi-Speed MIDI über Breakout Kabel * DIGICheck, RMEs einzigartiges Meter- und Analysetool mit Spectral Analyser, Professionelle Level Meter 2/8/16-Kanalig, Vector Audio Scope und diversen weiteren Analysefunktionen * HDSP Meter Bridge: Frei skalierbare Levelmeter mit Peak- und RMS Berechnung in Hardware * TotalMix: 512-Kanal Mischer mit 40 Bit interner Auflösung 3. EMU 1212M (1212 M) PCIe: * Top kwaliteit convertors 24-bit/192kHz convertors. * Hardware gestuurde effecten. * DSP zero-latency hardware mixen en monitoring. * Analoge en digitale I/O plus MIDI. * EMU Production Tools Software Bundle - Cakewalk SONAR , Steinberg Cubase LE, Ableton Live E-MU Edition **EMU 1212M PCI-e inputs/outputs:** * 2 balanced jack inputs. * 2 balanced jack outputs. * 24-bit/192kHz ADAT I/O. * 24-bit/192kHz Coaxiale S/PDif I/O switchable to AES/EBU. * MIDI I/O. 4. M-Audio Audiophile 192: - Up to 24-bit/192kHz audio - 2 balanced analog inputs (1/4” TRS) - 2 balanced analog outputs (1/4” TRS) - S/PDIF digital I/O (coaxial RCA connectors) with 2-channel PCM - SCMS copy protection control - Digital I/O supports surround-encoded AC-3 and DTS pass-through - Direct hardware input monitoring via separate balanced 1/4” TRS monitor outputs - Software routing of inputs and outputs - Digital I/O can be routed to/from external effects - 16-channel MIDI I/O - ASIO, WDM, GSIF 2 and Core Audio driver support for compatibility with most applications - 64-bit driver support for Windows - PCI 2.2 compatibility - Apple G5 compatible - Incompatible exceptions - Includes Ableton Live Lite music production software, so you can make music right away - Works with other Delta cards Technical Specifcations: - Compatibility - ASIO - WDM - GSIF 2 - Core Audio

    Read the article

  • Hide subdomain AND subdirectory using mod_rewrite?

    - by Jeremy
    I am trying to hide a subdomain and subdirectory from users. I know it may be easier to use a virtual host but will that not change direct links pointing at our site? The site currently resides at http://mail.ctrc.sk.ca/cms/ I want www.ctrc.sk.ca and ctrc.sk.ca to access this folder but still display www.ctrc.sk.ca. If that makes any sense. Here is what our current .htaccess file looks like, we are using Joomla so there already a few rules set up. Help is appreciated. # Helicon ISAPI_Rewrite configuration file # Version 3.1.0.78 ## # @version $Id: htaccess.txt 14401 2010-01-26 14:10:00Z louis $ # @package Joomla # @copyright Copyright (C) 2005 - 2010 Open Source Matters. All rights reserved. # @license http://www.gnu.org/copyleft/gpl.html GNU/GPL # Joomla! is Free Software ## ##################################################### # READ THIS COMPLETELY IF YOU CHOOSE TO USE THIS FILE # # The line just below this section: 'Options +FollowSymLinks' may cause problems # with some server configurations. It is required for use of mod_rewrite, but may already # be set by your server administrator in a way that dissallows changing it in # your .htaccess file. If using it causes your server to error out, comment it out (add # to # beginning of line), reload your site in your browser and test your sef url's. If they work, # it has been set by your server administrator and you do not need it set here. # ##################################################### ## Can be commented out if causes errors, see notes above. #Options +FollowSymLinks # # mod_rewrite in use RewriteEngine On ########## Begin - Rewrite rules to block out some common exploits ## If you experience problems on your site block out the operations listed below ## This attempts to block the most common type of exploit `attempts` to Joomla! # ## Deny access to extension xml files (uncomment out to activate) #<Files ~ "\.xml$"> #Order allow,deny #Deny from all #Satisfy all #</Files> ## End of deny access to extension xml files RewriteCond %{QUERY_STRING} mosConfig_[a-zA-Z_]{1,21}(=|\%3D) [OR] # Block out any script trying to base64_encode crap to send via URL RewriteCond %{QUERY_STRING} base64_encode.*\(.*\) [OR] # Block out any script that includes a <script> tag in URL RewriteCond %{QUERY_STRING} (\<|%3C).*script.*(\>|%3E) [NC,OR] # Block out any script trying to set a PHP GLOBALS variable via URL RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] # Block out any script trying to modify a _REQUEST variable via URL RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) # Send all blocked request to homepage with 403 Forbidden error! RewriteRule ^(.*)$ index.php [F,L] # ########## End - Rewrite rules to block out some common exploits # Uncomment following line if your webserver's URL # is not directly related to physical file paths. # Update Your Joomla! Directory (just / for root) #RewriteBase / ########## Begin - Joomla! core SEF Section # RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_URI} !^/index.php RewriteCond %{REQUEST_URI} (/|\.php|\.html|\.htm|\.feed|\.pdf|\.raw|/[^.]*)$ [NC] RewriteRule (.*) index.php RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] # ########## End - Joomla! core SEF Section EDIT Yes, mail.ctrc.sk.ca/cms/ is the root directory. Currently the DNS redirects from ctrc.sk.ca and www.ctrc.sk.ca to mail.ctrc.sk.ca/cms. However when it redirects the user still sees the mail.ctrc.sk.ca/cms/ url and I want them to only see www.ctrc.sk.ca.

    Read the article

  • Parallel processing slower than sequential?

    - by zebediah49
    EDIT: For anyone who stumbles upon this in the future: Imagemagick uses a MP library. It's faster to use available cores if they're around, but if you have parallel jobs, it's unhelpful. Do one of the following: do your jobs serially (with Imagemagick in parallel mode) set MAGICK_THREAD_LIMIT=1 for your invocation of the imagemagick binary in question. By making Imagemagick use only one thread, it slows down by 20-30% in my test cases, but meant I could run one job per core without issues, for a significant net increase in performance. Original question: While converting some images using ImageMagick, I noticed a somewhat strange effect. Using xargs was significantly slower than a standard for loop. Since xargs limited to a single process should act like a for loop, I tested that, and found it to be about the same. Thus, we have this demonstration. Quad core (AMD Athalon X4, 2.6GHz) Working entirely on a tempfs (16g ram total; no swap) No other major loads Results: /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 0m3.784s user 0m2.240s sys 0m0.230s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 0m9.097s user 0m28.020s sys 0m0.910s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 0m9.844s user 0m33.200s sys 0m1.270s Can anyone think of a reason why running two instances of this program takes more than twice as long in real time, and more than ten times as long in processor time to complete the same task? After that initial hit, more processes do not seem to have as significant of an effect. I thought it might have to do with disk seeking, so I did that test entirely in ram. Could it have something to do with how Convert works, and having more than one copy at once means it cannot use processor cache as efficiently or something? EDIT: When done with 1000x 769KB files, performance is as expected. Interesting. /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.679s user 5m6.980s sys 0m6.340s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 1 convert -auto-level real 3m37.152s user 5m6.140s sys 0m6.530s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 2 convert -auto-level real 2m7.578s user 5m35.410s sys 0m6.050s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 4 convert -auto-level real 1m36.959s user 5m48.900s sys 0m6.350s /media/ramdisk/img$ time for f in *.bmp; do echo $f ${f%bmp}png; done | xargs -n 2 -P 10 convert -auto-level real 1m36.392s user 5m54.840s sys 0m5.650s

    Read the article

  • bluetooth not working on Ubuntu 13.10

    - by iacopo
    I upgrated ubuntu from 13.4 to 13.10 and my bluetooth stopped working. When I open bluetooth I'm able to put it ON but the visibility doesn't show anything and didn't detect any device. when I: dmesg | grep Blue [ 2.046249] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.046252] usb 3-1: Manufacturer: Bluetooth v2.0 [ 15.255710] Bluetooth: Core ver 2.16 [ 15.255748] Bluetooth: HCI device and connection manager initialized [ 15.255759] Bluetooth: HCI socket layer initialized [ 15.255765] Bluetooth: L2CAP socket layer initialized [ 15.255776] Bluetooth: SCO socket layer initialized [ 20.110379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.110386] Bluetooth: BNEP filters: protocol multicast [ 20.110400] Bluetooth: BNEP socket layer initialized [ 20.120635] Bluetooth: RFCOMM TTY layer initialized [ 20.120656] Bluetooth: RFCOMM socket layer initialized [ 20.120660] Bluetooth: RFCOMM ver 1.11 when I digit: lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bc2:2300 Seagate RSS LLC Expansion Portable Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 0e6a:6001 Megawin Technology Co., Ltd GEMBIRD Flexible keyboard KB-109F-B-DE Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 13ee:0001 MosArt Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub when I: hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 DOWN RX bytes:457 acl:0 sco:0 events:16 errors:0 TX bytes:68 acl:0 sco:0 commands:16 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT when I digit: rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no when I digit: sudo gedit /etc/bluetooth/main.conf [General] # List of plugins that should not be loaded on bluetoothd startup #DisablePlugins = network,input # Default adaper name # %h - substituted for hostname # %d - substituted for adapter id Name = %h-%d # Default device class. Only the major and minor device class bits are # considered. Class = 0x000100 # How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever DiscoverableTimeout = 0 # How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever PairableTimeout = 0 # Use some other page timeout than the controller default one # which is 16384 (10 seconds). PageTimeout = 8192 # Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. AutoConnectTimeout = 60 # What value should be assumed for the adapter Powered property when # SetProperty(Powered, ...) hasn't been called yet. Defaults to true InitiallyPowered = true # Remember the previously stored Powered state when initializing adapters RememberPowered = false # Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd # Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to true. ReverseServiceDiscovery = true # Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. NameResolving = true # Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. DebugKeys = false # Enable the GATT functionality. Default is false EnableGatt = false when I digit: dmesg | grep Bluetooth [ 2.013041] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.013049] usb 3-1: Manufacturer: Bluetooth v2.0 [ 13.798293] Bluetooth: Core ver 2.16 [ 13.798338] Bluetooth: HCI device and connection manager initialized [ 13.798352] Bluetooth: HCI socket layer initialized [ 13.798357] Bluetooth: L2CAP socket layer initialized [ 13.798368] Bluetooth: SCO socket layer initialized [ 20.184162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.184173] Bluetooth: BNEP filters: protocol multicast [ 20.184197] Bluetooth: BNEP socket layer initialized [ 20.238947] Bluetooth: RFCOMM TTY layer initialized [ 20.238983] Bluetooth: RFCOMM socket layer initialized [ 20.239018] Bluetooth: RFCOMM ver 1.11 When I digit: uname -a Linux casa-desktop 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux When I digit: lsmod Module Size Used by parport_pc 32701 0 rfcomm 69070 4 bnep 19564 2 ppdev 17671 0 ip6t_REJECT 12910 1 xt_hl 12521 6 ip6t_rt 13507 3 nf_conntrack_ipv6 18938 9 nf_defrag_ipv6 34616 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17718 8 xt_limit 12711 11 xt_tcpudp 12884 32 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 9 nf_defrag_ipv4 12729 1 nf_conntrack_ipv4 xt_conntrack 12760 18 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12741 0 nf_nat 26653 1 nf_nat_ftp kvm_amd 59958 0 nf_conntrack_ftp 18608 1 nf_nat_ftp kvm 431315 1 kvm_amd nf_conntrack 91736 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ip_tables 27239 1 iptable_filter snd_hda_codec_realtek 55704 1 ghash_clmulni_intel 13259 0 aesni_intel 55624 0 aes_x86_64 17131 1 aesni_intel snd_hda_codec_hdmi 41117 1 x_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT lrw 13257 1 aesni_intel snd_hda_intel 48171 5 gf128mul 14951 1 lrw glue_helper 13990 1 aesni_intel ablk_helper 13597 1 aesni_intel joydev 17377 0 cryptd 20329 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hda_codec 188738 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel arc4 12608 2 snd_hwdep 13602 1 snd_hda_codec rt2800pci 18690 0 snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel radeon 1402449 3 rt2800lib 79963 1 rt2800pci btusb 28267 0 rt2x00pci 13287 1 rt2800pci rt2x00mmio 13603 1 rt2800pci snd_page_alloc 18710 2 snd_pcm,snd_hda_intel rt2x00lib 55238 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio snd_seq_midi 13324 0 mac80211 596969 3 rt2x00lib,rt2x00pci,rt2800lib snd_seq_midi_event 14899 1 snd_seq_midi ttm 83995 1 radeon snd_rawmidi 30095 1 snd_seq_midi cfg80211 479757 2 mac80211,rt2x00lib drm_kms_helper 52651 1 radeon snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi bluetooth 371880 12 bnep,btusb,rfcomm microcode 23518 0 eeprom_93cx6 13344 1 rt2800pci snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi crc_ccitt 12707 1 rt2800lib snd_timer 29433 2 snd_pcm,snd_seq snd 69141 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi psmouse 97626 0 drm 296739 5 ttm,drm_kms_helper,radeon k10temp 13126 0 soundcore 12680 1 snd serio_raw 13413 0 i2c_algo_bit 13413 1 radeon i2c_piix4 22106 0 video 19318 0 mac_hid 13205 0 lp 17759 0 parport 42299 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 53014 0 hid 105818 2 hid_generic,usbhid pata_acpi 13038 0 usb_storage 62062 1 r8169 67341 0 sdhci_pci 18985 0 sdhci 42630 1 sdhci_pci mii 13934 1 r8169 pata_atiixp 13242 0 ohci_pci 13561 0 ahci 25819 2 libahci 31898 1 ahci Someone can help me?

    Read the article

  • Java EE 6 and NoSQL/MongoDB on GlassFish using JPA and EclipseLink 2.4 (TOTD #175)

    - by arungupta
    TOTD #166 explained how to use MongoDB in your Java EE 6 applications. The code in that tip used the APIs exposed by the MongoDB Java driver and so requires you to learn a new API. However if you are building Java EE 6 applications then you are already familiar with Java Persistence API (JPA). Eclipse Link 2.4, scheduled to release as part of Eclipse Juno, provides support for NoSQL databases by mapping a JPA entity to a document. Their wiki provides complete explanation of how the mapping is done. This Tip Of The Day (TOTD) will show how you can leverage that support in your Java EE 6 applications deployed on GlassFish 3.1.2. Before we dig into the code, here are the key concepts ... A POJO is mapped to a NoSQL data source using @NoSQL or <no-sql> element in "persistence.xml". A subset of JPQL and Criteria query are supported, based upon the underlying data store Connection properties are defined in "persistence.xml" Now, lets lets take a look at the code ... Download the latest EclipseLink 2.4 Nightly Bundle. There is a Installer, Source, and Bundle - make sure to download the Bundle link (20120410) and unzip. Download GlassFish 3.1.2 zip and unzip. Install the Eclipse Link 2.4 JARs in GlassFish Remove the following JARs from "glassfish/modules": org.eclipse.persistence.antlr.jar org.eclipse.persistence.asm.jar org.eclipse.persistence.core.jar org.eclipse.persistence.jpa.jar org.eclipse.persistence.jpa.modelgen.jar org.eclipse.persistence.moxy.jar org.eclipse.persistence.oracle.jar Add the following JARs from Eclipse Link 2.4 nightly build to "glassfish/modules": org.eclipse.persistence.antlr_3.2.0.v201107111232.jar org.eclipse.persistence.asm_3.3.1.v201107111215.jar org.eclipse.persistence.core.jpql_2.4.0.v20120407-r11132.jar org.eclipse.persistence.core_2.4.0.v20120407-r11132.jar org.eclipse.persistence.jpa.jpql_2.0.0.v20120407-r11132.jar org.eclipse.persistence.jpa.modelgen_2.4.0.v20120407-r11132.jar org.eclipse.persistence.jpa_2.4.0.v20120407-r11132.jar org.eclipse.persistence.moxy_2.4.0.v20120407-r11132.jar org.eclipse.persistence.nosql_2.4.0.v20120407-r11132.jar org.eclipse.persistence.oracle_2.4.0.v20120407-r11132.jar Start MongoDB Download latest MongoDB from here (2.0.4 as of this writing). Create the default data directory for MongoDB as: sudo mkdir -p /data/db/sudo chown `id -u` /data/db Refer to Quickstart for more details. Start MongoDB as: arungup-mac:mongodb-osx-x86_64-2.0.4 <arungup> ->./bin/mongod./bin/mongod --help for help and startup optionsMon Apr  9 12:56:02 [initandlisten] MongoDB starting : pid=3124 port=27017 dbpath=/data/db/ 64-bit host=arungup-mac.localMon Apr  9 12:56:02 [initandlisten] db version v2.0.4, pdfile version 4.5Mon Apr  9 12:56:02 [initandlisten] git version: 329f3c47fe8136c03392c8f0e548506cb21f8ebfMon Apr  9 12:56:02 [initandlisten] build info: Darwin erh2.10gen.cc 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386 i386 BOOST_LIB_VERSION=1_40Mon Apr  9 12:56:02 [initandlisten] options: {}Mon Apr  9 12:56:02 [initandlisten] journal dir=/data/db/journalMon Apr  9 12:56:02 [initandlisten] recover : no journal files present, no recovery neededMon Apr  9 12:56:02 [websvr] admin web console waiting for connections on port 28017Mon Apr  9 12:56:02 [initandlisten] waiting for connections on port 27017 Check out the JPA/NoSQL sample from SVN repository. The complete source code built in this TOTD can be downloaded here. Create Java EE 6 web app Create a Java EE 6 Maven web app as: mvn archetype:generate -DarchetypeGroupId=org.codehaus.mojo.archetypes -DarchetypeArtifactId=webapp-javaee6 -DgroupId=model -DartifactId=javaee-nosql -DarchetypeVersion=1.5 -DinteractiveMode=false Copy the model files from the checked out workspace to the generated project as: cd javaee-nosqlcp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/model src/main/java Copy "persistence.xml" mkdir src/main/resources cp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/META-INF ./src/main/resources Add the following dependencies: <dependency> <groupId>org.eclipse.persistence</groupId> <artifactId>org.eclipse.persistence.jpa</artifactId> <version>2.4.0-SNAPSHOT</version> <scope>provided</scope></dependency><dependency> <groupId>org.eclipse.persistence</groupId> <artifactId>org.eclipse.persistence.nosql</artifactId> <version>2.4.0-SNAPSHOT</version></dependency><dependency> <groupId>org.mongodb</groupId> <artifactId>mongo-java-driver</artifactId> <version>2.7.3</version></dependency> The first one is for the EclipseLink latest APIs, the second one is for EclipseLink/NoSQL support, and the last one is the MongoDB Java driver. And the following repository: <repositories> <repository> <id>EclipseLink Repo</id> <url>http://www.eclipse.org/downloads/download.php?r=1&amp;nf=1&amp;file=/rt/eclipselink/maven.repo</url> <snapshots> <enabled>true</enabled> </snapshots> </repository>  </repositories> Copy the "Test.java" to the generated project: mkdir src/main/java/examplecp -r ~/code/workspaces/org.eclipse.persistence.example.jpa.nosql.mongo/src/example/Test.java ./src/main/java/example/ This file contains the source code to CRUD the JPA entity to MongoDB. This sample is explained in detail on EclipseLink wiki. Create a new Servlet in "example" directory as: package example;import java.io.IOException;import java.io.PrintWriter;import javax.servlet.ServletException;import javax.servlet.annotation.WebServlet;import javax.servlet.http.HttpServlet;import javax.servlet.http.HttpServletRequest;import javax.servlet.http.HttpServletResponse;/** * @author Arun Gupta */@WebServlet(name = "TestServlet", urlPatterns = {"/TestServlet"})public class TestServlet extends HttpServlet { protected void processRequest(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { response.setContentType("text/html;charset=UTF-8"); PrintWriter out = response.getWriter(); try { out.println("<html>"); out.println("<head>"); out.println("<title>Servlet TestServlet</title>"); out.println("</head>"); out.println("<body>"); out.println("<h1>Servlet TestServlet at " + request.getContextPath() + "</h1>"); try { Test.main(null); } catch (Exception ex) { ex.printStackTrace(); } out.println("</body>"); out.println("</html>"); } finally { out.close(); } } @Override protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { processRequest(request, response); } @Override protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { processRequest(request, response); }} Build the project and deploy it as: mvn clean packageglassfish3/bin/asadmin deploy --force=true target/javaee-nosql-1.0-SNAPSHOT.war Accessing http://localhost:8080/javaee-nosql/TestServlet shows the following messages in the server.log: connecting(EISLogin( platform=> MongoPlatform user name=> "" MongoConnectionSpec())) . . .Connected: User: Database: 2.7  Version: 2.7 . . .Executing MappedInteraction() spec => null properties => {mongo.collection=CUSTOMER, mongo.operation=INSERT} input => [DatabaseRecord( CUSTOMER._id => 4F848E2BDA0670307E2A8FA4 CUSTOMER.NAME => AMCE)]. . .Data access result: [{TOTALCOST=757.0, ORDERLINES=[{DESCRIPTION=table, LINENUMBER=1, COST=300.0}, {DESCRIPTION=balls, LINENUMBER=2, COST=5.0}, {DESCRIPTION=rackets, LINENUMBER=3, COST=15.0}, {DESCRIPTION=net, LINENUMBER=4, COST=2.0}, {DESCRIPTION=shipping, LINENUMBER=5, COST=80.0}, {DESCRIPTION=handling, LINENUMBER=6, COST=55.0},{DESCRIPTION=tax, LINENUMBER=7, COST=300.0}], SHIPPINGADDRESS=[{POSTALCODE=L5J1H7, PROVINCE=ON, COUNTRY=Canada, CITY=Ottawa,STREET=17 Jane St.}], VERSION=2, _id=4F848E2BDA0670307E2A8FA8,DESCRIPTION=Pingpong table, CUSTOMER__id=4F848E2BDA0670307E2A8FA7, BILLINGADDRESS=[{POSTALCODE=L5J1H8, PROVINCE=ON, COUNTRY=Canada, CITY=Ottawa, STREET=7 Bank St.}]}] You'll not see any output in the browser, just the output in the console. But the code can be easily modified to do so. Once again, the complete Maven project can be downloaded here. Do you want to try accessing relational and non-relational (aka NoSQL) databases in the same PU ?

    Read the article

  • Oracle Expands Sun Blade Portfolio for Cloud and Highly Virtualized Environments

    - by Ferhat Hatay
    Oracle announced the expansion of Sun Blade Portfolio for cloud and highly virtualized environments that deliver powerful performance and simplified management as tightly integrated systems.  Along with the SPARC T3-1B blade server, Oracle VM blade cluster reference configuration and Oracle's optimized solution for Oracle WebLogic Suite, Oracle introduced the dual-node Sun Blade X6275 M2 server module with some impressive benchmark results.   Benchmarks on the Sun Blade X6275 M2 server module demonstrate the outstanding performance characteristics critical for running varied commercial applications used in cloud and highly virtualized environments.  These include best-in-class SPEC CPU2006 results with the Intel Xeon processor 5600 series, six Fluent world records and 1.8 times the price-performance of the IBM Power 755 running NAMD, a prominent bio-informatics workload.   Benchmarks for Sun Blade X6275 M2 server module  SPEC CPU2006  The Sun Blade X6275 M2 server module demonstrated best in class SPECint_rate2006 results for all published results using the Intel Xeon processor 5600 series, with a result of 679.  This result is 97% better than the HP BL460c G7 blade, 80% better than the IBM HS22V blade, and 79% better than the Dell M710 blade.  This result demonstrates the density advantage of the new Oracle's server module for space-constrained data centers.     Sun Blade X6275M2 (2 Nodes, Intel Xeon X5670 2.93GHz) - 679 SPECint_rate2006; HP ProLiant BL460c G7 (2.93 GHz, Intel Xeon X5670) - 347 SPECint_rate2006; IBM BladeCenter HS22V (Intel Xeon X5680)  - 377 SPECint_rate2006; Dell PowerEdge M710 (Intel Xeon X5680, 3.33 GHz) - 380 SPECint_rate2006.  SPEC, SPECint, SPECfp reg tm of Standard Performance Evaluation Corporation. Results from www.spec.org as of 11/24/2010 and this report.    For more specifics about these results, please go to see http://blogs.sun.com/BestPerf   Fluent The Sun Fire X6275 M2 server module produced world-record results on each of the six standard cases in the current "FLUENT 12" benchmark test suite at 8-, 12-, 24-, 32-, 64- and 96-core configurations. These results beat the most recent QLogic score with IBM DX 360 M series platforms and QLogic "Truescale" interconnects.  Results on sedan_4m test case on the Sun Blade X6275 M2 server module are 23% better than the HP C7000 system, and 20% better than the IBM DX 360 M2; Dell has not posted a result for this test case.  Results can be found at the FLUENT website.   ANSYS's FLUENT software solves fluid flow problems, and is based on a numerical technique called computational fluid dynamics (CFD), which is used in the automotive, aerospace, and consumer products industries. The FLUENT 12 benchmark test suite consists of seven models that are well suited for multi-node clustered environments and representative of modern engineering CFD clusters. Vendors benchmark their systems with the principal objective of providing comparative performance information for FLUENT software that, among other things, depends on compilers, optimization, interconnect, and the performance characteristics of the hardware.   FLUENT application performance is representative of other commercial applications that require memory and CPU resources to be available in a scalable cluster-ready format.  FLUENT benchmark has six conventional test cases (eddy_417k, turbo_500k, aircraft_2m, sedan_4m, truck_14m, truck_poly_14m) at various core counts.   All information on the FLUENT website (http://www.fluent.com) is Copyrighted1995-2010 by ANSYS Inc. Results as of November 24, 2010. For more specifics about these results, please go to see http://blogs.sun.com/BestPerf   NAMD Results on the Sun Blade X6275 M2 server module running NAMD (a parallel molecular dynamics code designed for high-performance simulation of large biomolecular systems) show up to a 1.8X better price/performance than IBM's Power 7-based system.  For space-constrained environments, the ultra-dense Sun Blade X6275 M2 server module provides a 1.7X better price/performance per rack unit than IBM's system.     IBM Power 755 4-way Cluster (16U). Total price for cluster: $324,212. See IBM United States Hardware Announcement 110-008, dated February 9, 2010, pp. 4, 21 and 39-46.  Sun Blade X6275 M2 8-Blade Cluster (10U). Total price for cluster:  $193,939. Price/performance and performance/RU comparisons based on f1ATPase molecule test results. Sun Blade X6275 M2 cluster: $3,568/step/sec, 5.435 step/sec/RU. IBM Power 755 cluster: $6,355/step/sec, 3.189 step/sec/U. See http://www-03.ibm.com/systems/power/hardware/reports/system_perf.html. See http://www.ks.uiuc.edu/Research/namd/performance.html for more information, results as of 11/24/10.   For more specifics about these results, please go to see http://blogs.sun.com/BestPerf   Reverse Time Migration The Reverse Time Migration is heavily used in geophysical imaging and modeling for Oil & Gas Exploration.  The Sun Blade X6275 M2 server module showed up to a 40% performance improvement over the previous generation server module with super-linear scalability to 16 nodes for the 9-Point Stencil used in this Reverse Time Migration computational kernel.  The balanced combination of Oracle's Sun Storage 7410 system with the Sun Blade X6275 M2 server module cluster showed linear scalability for the total application throughput, including the I/O and MPI communication, to produce a final 3-D seismic depth imaged cube for interpretation. The final image write time from the Sun Blade X6275 M2 server module nodes to Oracle's Sun Storage 7410 system achieved 10GbE line speed of 1.25 GBytes/second or better performance. Between subsequent runs, the effects of I/O buffer caching on the Sun Blade X6275 M2 server module nodes and write optimized caching on the Sun Storage 7410 system gave up to 1.8 GBytes/second effective write performance. The performance results and characterization of this Reverse Time Migration benchmark could serve as a useful measure for many other I/O intensive commercial applications. 3D VTI Reverse Time Migration Seismic Depth Imaging, see http://blogs.sun.com/BestPerf/entry/3d_vti_reverse_time_migration for more information, results as of 11/14/2010.                            

    Read the article

  • How to solve exception_priv _instruction exception while running destop project? [on hold]

    - by Haritha
    While running desktop project im getting exception_priv _instruction how to solve this??? while running this page is coming # # A fatal error has been detected by the Java Runtime Environment: # # EXCEPTION_PRIV_INSTRUCTION (0xc0000096) at pc=0x02f5a92b, pid=3012, tid=3104 # # JRE version: 7.0-b147 # Java VM: Java HotSpot(TM) Client VM (21.0-b17 mixed mode, sharing windows-x86 ) # Problematic frame: # C 0x02f5a92b # # Failed to write core dump. Minidumps are not enabled by default on client versions of Windows # # If you would like to submit a bug report, please visit: # http://bugreport.sun.com/bugreport/crash.jsp # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # --------------- T H R E A D --------------- Current thread (0x02f5a800): JavaThread "LWJGL Application" [_thread_in_native, id=3104, stack(0x076f0000,0x07740000)] siginfo: ExceptionCode=0xc0000096 Registers: EAX=0x000df4f0, EBX=0x32afc180, ECX=0x000df4f0, EDX=0x00000020 ESP=0x0773f768, EBP=0x0773f790, ESI=0x32afc180, EDI=0x02f5a800 EIP=0x02f5a92b, EFLAGS=0x00010206 Top of Stack: (sp=0x0773f768) 0x0773f768: 02bd429c 02bd429c 0773f770 32afc180 0x0773f778: 0773f7b8 32b022c8 00000000 32afc180 0x0773f788: 00000000 0773f7a0 0773f7dc 00943187 0x0773f798: 229ec1c0 00948839 69081736 00000000 0x0773f7a8: 089b0048 00000000 00000014 00001406 0x0773f7b8: 00000002 0773f7bc 32afbeb0 0773f7f8 0x0773f7c8: 32b022c8 00000000 32afbf00 0773f7a0 0x0773f7d8: 0773f7f0 0773f81c 00943187 69081736 Instructions: (pc=0x02f5a92b) 0x02f5a90b: 00 43 00 00 00 00 f0 bc 02 e8 00 e9 22 40 f7 73 0x02f5a91b: 07 85 a5 94 00 90 f7 73 07 50 cc a0 6d d8 49 c0 0x02f5a92b: 6d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x02f5a93b: 00 00 00 00 00 00 00 00 00 08 80 3d 37 00 00 00 Register to memory mapping: EAX=0x000df4f0 is an unknown value EBX=0x32afc180 is an oop {method} - klass: {other class} ECX=0x000df4f0 is an unknown value EDX=0x00000020 is an unknown value ESP=0x0773f768 is pointing into the stack for thread: 0x02f5a800 EBP=0x0773f790 is pointing into the stack for thread: 0x02f5a800 ESI=0x32afc180 is an oop {method} - klass: {other class} EDI=0x02f5a800 is a thread Stack: [0x076f0000,0x07740000], sp=0x0773f768, free space=317k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) C 0x02f5a92b j org.lwjgl.opengl.GL11.glVertexPointer(IILjava/nio/FloatBuffer;)V+48 j com.badlogic.gdx.backends.lwjgl.LwjglGL10.glVertexPointer(IIILjava/nio/Buffer;)V+53 j com.badlogic.gdx.graphics.glutils.VertexArray.bind()V+149 j com.badlogic.gdx.graphics.Mesh.bind()V+25 j com.badlogic.gdx.graphics.Mesh.render(IIIZ)V+32 j com.badlogic.gdx.graphics.Mesh.render(III)V+8 j com.badlogic.gdx.graphics.g2d.SpriteBatch.flush()V+197 j com.badlogic.gdx.graphics.g2d.SpriteBatch.switchTexture(Lcom/badlogic/gdx/graphics/Texture;)V+1 j com.badlogic.gdx.graphics.g2d.SpriteBatch.draw(Lcom/badlogic/gdx/graphics/Texture;FFFF)V+33 j sevenseas.game.WorldRenderer.drawBob()V+54 j sevenseas.game.WorldRenderer.render()V+12 j sevenseas.game.GameClass.render(F)V+38 j com.badlogic.gdx.Game.render()V+19 j com.badlogic.gdx.backends.lwjgl.LwjglApplication.mainLoop()V+642 j com.badlogic.gdx.backends.lwjgl.LwjglApplication$1.run()V+27 v ~StubRoutines::call_stub V [jvm.dll+0x122c7e] V [jvm.dll+0x1c9c0e] V [jvm.dll+0x122e73] V [jvm.dll+0x122ed7] V [jvm.dll+0xccd1f] V [jvm.dll+0x14433f] V [jvm.dll+0x171549] C [msvcr100.dll+0x5c6de] endthreadex+0x3a C [msvcr100.dll+0x5c788] endthreadex+0xe4 C [kernel32.dll+0xb713] GetModuleFileNameA+0x1b4 Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j org.lwjgl.opengl.GL11.nglVertexPointer(IIIJJ)V+0 j org.lwjgl.opengl.GL11.glVertexPointer(IILjava/nio/FloatBuffer;)V+48 j com.badlogic.gdx.backends.lwjgl.LwjglGL10.glVertexPointer(IIILjava/nio/Buffer;)V+53 j com.badlogic.gdx.graphics.glutils.VertexArray.bind()V+149 j com.badlogic.gdx.graphics.Mesh.bind()V+25 j com.badlogic.gdx.graphics.Mesh.render(IIIZ)V+32 j com.badlogic.gdx.graphics.Mesh.render(III)V+8 j com.badlogic.gdx.graphics.g2d.SpriteBatch.flush()V+197 j com.badlogic.gdx.graphics.g2d.SpriteBatch.switchTexture(Lcom/badlogic/gdx/graphics/Texture;)V+1 j com.badlogic.gdx.graphics.g2d.SpriteBatch.draw(Lcom/badlogic/gdx/graphics/Texture;FFFF)V+33 j sevenseas.game.WorldRenderer.drawBob()V+54 j sevenseas.game.WorldRenderer.render()V+12 j sevenseas.game.GameClass.render(F)V+38 j com.badlogic.gdx.Game.render()V+19 j com.badlogic.gdx.backends.lwjgl.LwjglApplication.mainLoop()V+642 j com.badlogic.gdx.backends.lwjgl.LwjglApplication$1.run()V+27 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( => current thread ) 0x003d6c00 JavaThread "DestroyJavaVM" [_thread_blocked, id=3240, stack(0x008c0000,0x00910000)] =>0x02f5a800 JavaThread "LWJGL Application" [_thread_in_native, id=3104, stack(0x076f0000,0x07740000)] 0x02bcf000 JavaThread "Service Thread" daemon [_thread_blocked, id=2612, stack(0x02e00000,0x02e50000)] 0x02bc1000 JavaThread "C1 CompilerThread0" daemon [_thread_blocked, id=2776, stack(0x02db0000,0x02e00000)] 0x02bbf400 JavaThread "Attach Listener" daemon [_thread_blocked, id=2448, stack(0x02d60000,0x02db0000)] 0x02bbe000 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1764, stack(0x02d10000,0x02d60000)] 0x02bb8000 JavaThread "Finalizer" daemon [_thread_blocked, id=3864, stack(0x02cc0000,0x02d10000)] 0x02bb3400 JavaThread "Reference Handler" daemon [_thread_blocked, id=2424, stack(0x02c70000,0x02cc0000)] Other Threads: 0x02bb1800 VMThread [stack: 0x02c20000,0x02c70000] [id=3076] 0x02bd1000 WatcherThread [stack: 0x02e50000,0x02ea0000] [id=3276] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap def new generation total 4928K, used 2571K [0x229c0000, 0x22f10000, 0x27f10000) eden space 4416K, 46% used [0x229c0000, 0x22bc2e38, 0x22e10000) from space 512K, 100% used [0x22e90000, 0x22f10000, 0x22f10000) to space 512K, 0% used [0x22e10000, 0x22e10000, 0x22e90000) tenured generation total 10944K, used 634K [0x27f10000, 0x289c0000, 0x329c0000) the space 10944K, 5% used [0x27f10000, 0x27faea60, 0x27faec00, 0x289c0000) compacting perm gen total 12288K, used 1655K [0x329c0000, 0x335c0000, 0x369c0000) the space 12288K, 13% used [0x329c0000, 0x32b5dc58, 0x32b5de00, 0x335c0000) ro space 10240K, 42% used [0x369c0000, 0x36dfc660, 0x36dfc800, 0x373c0000) rw space 12288K, 53% used [0x373c0000, 0x37a38180, 0x37a38200, 0x37fc0000) Code Cache [0x00940000, 0x009d8000, 0x02940000) total_blobs=305 nmethods=80 adapters=158 free_code_cache=32183Kb largest_free_block=32955904 Dynamic libraries: 0x00400000 - 0x0042f000 C:\Program Files\Java\jre7\bin\javaw.exe 0x7c900000 - 0x7c9af000 C:\WINDOWS\system32\ntdll.dll 0x7c800000 - 0x7c8f6000 C:\WINDOWS\system32\kernel32.dll 0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll 0x77e70000 - 0x77f02000 C:\WINDOWS\system32\RPCRT4.dll 0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll 0x7e410000 - 0x7e4a1000 C:\WINDOWS\system32\USER32.dll 0x77f10000 - 0x77f59000 C:\WINDOWS\system32\GDI32.dll 0x773d0000 - 0x774d3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\COMCTL32.dll 0x77c10000 - 0x77c68000 C:\WINDOWS\system32\msvcrt.dll 0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll 0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL 0x629c0000 - 0x629c9000 C:\WINDOWS\system32\LPK.DLL 0x74d90000 - 0x74dfb000 C:\WINDOWS\system32\USP10.dll 0x78aa0000 - 0x78b5e000 C:\Program Files\Java\jre7\bin\msvcr100.dll 0x6d940000 - 0x6dc61000 C:\Program Files\Java\jre7\bin\client\jvm.dll 0x71ad0000 - 0x71ad9000 C:\WINDOWS\system32\WSOCK32.dll 0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll 0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll 0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll 0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL 0x6d8d0000 - 0x6d8dc000 C:\Program Files\Java\jre7\bin\verify.dll 0x6d370000 - 0x6d390000 C:\Program Files\Java\jre7\bin\java.dll 0x6d920000 - 0x6d933000 C:\Program Files\Java\jre7\bin\zip.dll 0x6cec0000 - 0x6cf42000 C:\Documents and Settings\7stl0225\Local Settings\Temp\libgdx7stl0225\37fe1abc\gdx.dll 0x10000000 - 0x1004c000 C:\Documents and Settings\7stl0225\Local Settings\Temp\libgdx7stl0225\52d76f2b\lwjgl.dll 0x5ed00000 - 0x5edcc000 C:\WINDOWS\system32\OPENGL32.dll 0x68b20000 - 0x68b40000 C:\WINDOWS\system32\GLU32.dll 0x73760000 - 0x737ab000 C:\WINDOWS\system32\DDRAW.dll 0x73bc0000 - 0x73bc6000 C:\WINDOWS\system32\DCIMAN32.dll 0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll 0x070b0000 - 0x07115000 C:\DOCUME~1\7stl0225\LOCALS~1\Temp\libgdx7stl0225\52d76f2b\OpenAL32.dll 0x7c9c0000 - 0x7d1d7000 C:\WINDOWS\system32\SHELL32.dll 0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll 0x5ad70000 - 0x5ada8000 C:\WINDOWS\system32\uxtheme.dll 0x76fd0000 - 0x7704f000 C:\WINDOWS\system32\CLBCATQ.DLL 0x77050000 - 0x77115000 C:\WINDOWS\system32\COMRes.dll 0x77120000 - 0x771ab000 C:\WINDOWS\system32\OLEAUT32.dll 0x73f10000 - 0x73f6c000 C:\WINDOWS\system32\dsound.dll 0x76c30000 - 0x76c5e000 C:\WINDOWS\system32\WINTRUST.dll 0x77a80000 - 0x77b15000 C:\WINDOWS\system32\CRYPT32.dll 0x77b20000 - 0x77b32000 C:\WINDOWS\system32\MSASN1.dll 0x76c90000 - 0x76cb8000 C:\WINDOWS\system32\IMAGEHLP.dll 0x72d20000 - 0x72d29000 C:\WINDOWS\system32\wdmaud.drv 0x72d10000 - 0x72d18000 C:\WINDOWS\system32\msacm32.drv 0x77be0000 - 0x77bf5000 C:\WINDOWS\system32\MSACM32.dll 0x77bd0000 - 0x77bd7000 C:\WINDOWS\system32\midimap.dll 0x73ee0000 - 0x73ee4000 C:\WINDOWS\system32\KsUser.dll 0x755c0000 - 0x755ee000 C:\WINDOWS\system32\msctfime.ime 0x69000000 - 0x691a9000 C:\WINDOWS\system32\sisgl.dll 0x73b30000 - 0x73b45000 C:\WINDOWS\system32\mscms.dll 0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV 0x66e90000 - 0x66ed1000 C:\WINDOWS\system32\icm32.dll 0x07760000 - 0x0778d000 C:\Program Files\WordWeb\WHook.dll 0x74c80000 - 0x74cac000 C:\WINDOWS\system32\OLEACC.dll 0x76080000 - 0x760e5000 C:\WINDOWS\system32\MSVCP60.dll VM Arguments: jvm_args: -Dfile.encoding=Cp1252 java_command: sevenseas.game.MainDesktop Launcher Type: SUN_STANDARD Environment Variables: PATH=C:/Program Files/Java/jre7/bin/client;C:/Program Files/Java/jre7/bin;C:/Program Files/Java/jre7/lib/i386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Java\jdk1.7.0\bin;C:\eclipse; USERNAME=7stl0225 OS=Windows_NT PROCESSOR_IDENTIFIER=x86 Family 15 Model 4 Stepping 1, GenuineIntel --------------- S Y S T E M --------------- OS: Windows XP Build 2600 Service Pack 3 CPU:total 1 (1 cores per cpu, 1 threads per core) family 15 model 4 stepping 1, cmov, cx8, fxsr, mmx, sse, sse2, sse3 Memory: 4k page, physical 2031088k(939252k free), swap 3969920k(3011396k free) vm_info: Java HotSpot(TM) Client VM (21.0-b17) for windows-x86 JRE (1.7.0-b147), built on Jun 27 2011 02:25:52 by "java_re" with unknown MS VC++:1600 time: Sat Oct 26 12:35:14 2013 elapsed time: 0 seconds

    Read the article

  • NVIDIA x server - "sudo nvidia config" does not generate a working 'xorg.config'

    - by Mike
    I am over 18 hours deep on this challenge. I got to this point and am stuck. very stuck. Maybe you can figure it out? Ubuntu Version 12.04 LTS with all the updates installed. Problem: The default settings in "etc/X11/xorg.conf" that are generated by the "nvidia-xconfig" tool, do not allow the NVIDIA x server to connect to the driver in my "System Settings Additional Driver window". (that's how I understand it. Lots of information below). Symptoms of Problem "System Settings Additional Driver" window has drivers, but the nvidia x server cannot connect/utilize any of the 4 drivers. the drivers are activated, but not in use. When I go to "System Tools Administration NVIDIA x server settings" I get an error that basically tells me to create a default file to initialize the NVIDIA X server (screen shot below). This is the messages the terminal gives after running a "sudo nvidia-xconfig" command for the first time. It seems that the generated file by the tool i just ran is generating a bad/unusable file: If I run the "sudo nvidia-xconfig" command again, I wont get an error the second time. However when I reboot, the default file that is generated (etc/X11/xorg.conf) simply puts the screen resolution at 800 x 600 (or something big like that). When I try to go to NVIDIA x server settings I am greeted with the same screen as the screen shot as in symptom 2 (no option to change the resolution). If I try to go to "system settings display" there are no other resolutions to choose from. At this point I must delete the newly minted "xorg.conf" and reinstate the original in its place. Here are the contents of the "xorg.conf" that is generated first (the one missing required information): # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Hardware: I ran the "lspci|grep VGA". There results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) More Hardware info: Ram: 16GB CPU: Intel Core i7-2720QM @2.2GHz * 8 Other: 64 bit. This is a triple boot computer and not a VM. Attempts With Not Success on My End: 1) Tried to append the "xorg.conf" with what I perceive is missing information and obviously it didn't fly. 2) All the other stuff I tried got me to this point. 3) See if this link is helpful to you (I barely get it, but i get enough knowing that a smarter person might find this useful): http://manpages.ubuntu.com/manpages/lucid/man1/nvidia-xconfig.1.html 4) I am completely new to Linux (40 hours over past week), but not to programming. However I am very serious about changing over to Linux. When you respond (I hope someone responds...) please respond in a way that a person new to Linux can understand. 5) By the way, the reason I am in this mess is because I MUST have a second monitor running from my laptop, and "System Settings Display" doesn't recognize my second display. I know it is possible to make the second display work in my system, because when I boot from the install CD, I perform work on the native laptop monitor, but the second monitor shows a purple screen with Ubuntu in the middle, so I know the VGA port is sending a signal out. If this is too much for you to tackle please suggest an alternative method to get a second display. I don't want to go to windows but I cannot have a single display. I am really fudged here. I hope some smart person can help. Thanks in advance. Mike. **********************EDIT #1********************** More Details About Graphics Card I was asked "which brand of nvidia-card do you have exactly?" Here is what I did to provide more info (maybe relevant, maybe not, but here is everything): 1) Took my Lenovo W520 right apart to see if there is an identifier on the actual card. However I realized that if I get deep enough to take a look, the laptop "won't like it". so I put it back together. Figuring out the card this way is not an option for me right now. 2) (My computer is triple boot) I logged into Win7 and ran 'dxdiag' command. here is the screen shot: 3) I tried to look on the lenovo website for more details... but no luck. I took a look at my receipts and here is info form receipt: System Unit: W520 NVIDIA Quadro 1000M 2GB 4) In win7 I went to the NVIDIA website and used the option to have my card 'scanned' by a Java applet to determine the latest update for my card. I tried the same with Ubuntu but I can't get the applet to run. Here is the recommended driver from from the NVIDIA Applet for my card for Win7 (I hope this shines some light on the specifics of the card): Quadro/NVS/Tesla/GRID Desktop Driver Release R319 Version: 320.00 WHQL Release Date: 3.5.2013 5) Also I went on the NVIDIA driver search and looked through every possible combination of product type + product series + product to find all the combinations that yield a 1000M card. My card is: Product Type: Quadro Product Series: Quadro Series (Notebooks) Product: 1000M ***********************EDIT #2******************* Additional Symptoms Another question that generated more symptoms I previously didn't mention was: "After generating xorg.conf by nvidia-xconfig, go to additional drivers, do you see nvidia-304?" 1) I took a screen shot of the "additional drivers" right after generating xorg.conf by nvidia-xconfig. Here it is: 2) Then I did a reboot. Now Ubuntu is 600 x 800 resolution. When I logged in after the computer came up I got an error (which I always get after generating xorg.conf by nvidia-xconfig and rebooting) 3) To finally answer the question - No. There is no "NVIDIA-304" driver. Screen shot of additional drivers after generating xorg.conf by nvidia-xconfig and rebooting : At this point I revert to the original xorg.conf and delete the xorg.conf generated by Nvidia.

    Read the article

  • The SPARC SuperCluster

    - by Karoly Vegh
    Oracle has been providing a lead in the Engineered Systems business for quite a while now, in accordance with the motto "Hardware and Software Engineered to Work Together." Indeed it is hard to find a better definition of these systems.  Allow me to summarize the idea. It is:  Build a compute platform optimized to run your technologies Develop application aware, intelligently caching storage components Take an impressively fast network technology interconnecting it with the compute nodes Tune the application to scale with the nodes to yet unseen performance Reduce the amount of data moving via compression Provide this all in a pre-integrated single product with a single-pane management interface All these ideas have been around in IT for quite some time now. The real Oracle advantage is adding the last one to put these all together. Oracle has built quite a portfolio of Engineered Systems, to run its technologies - and run those like they never ran before. In this post I'll focus on one of them that serves as a consolidation demigod, a multi-purpose engineered system.  As you probably have guessed, I am talking about the SPARC SuperCluster. It has many great features inherited from its predecessors, and it adds several new ones. Allow me to pick out and elaborate about some of the most interesting ones from a technological point of view.  I. It is the SPARC SuperCluster T4-4. That is, as compute nodes, it includes SPARC T4-4 servers that we learned to appreciate and respect for their features: The SPARC T4 CPUs: Each CPU has 8 cores, each core runs 8 threads. The SPARC T4-4 servers have 4 sockets. That is, a single compute node can in parallel, simultaneously  execute 256 threads. Now, a full-rack SPARC SuperCluster has 4 of these servers on board. Remember the keyword demigod.  While retaining the forerunner SPARC T3's exceptional throughput, the SPARC T4 CPUs raise the bar with single performance too - a humble 5x better one than their ancestors.  actually, the SPARC T4 CPU cores run in both single-threaded and multi-threaded mode, and switch between these two on-the-fly, fulfilling not only single-threaded OR multi-threaded applications' needs, but even mixed requirements (like in database workloads!). Data security, anyone? Every SPARC T4 CPU core has a built-in encryption engine, that is, encryption algorithms cast into silicon.  A PCI controller right on the chip for customers who need I/O performance.  Built-in, no-cost Virtualization:  Oracle VM for SPARC (the former LDoms or Logical Domains) is not a server-emulation virtualization technology but rather a serverpartitioning one, the hypervisor runs in the server firmware, and all the VMs' HW resources (I/O, CPU, memory) are accessed natively, without performance overhead.  This enables customers to run a number of Solaris 10 and Solaris 11 VMs separated, independent of each other within a physical server II. For Database performance, it includes Exadata Storage Cells - one of the main reasons why the Exadata Database Machine performs at diabolic speed. What makes them important? They provide DB backend storage for your Oracle Databases to run on the SPARC SuperCluster, that is what they are built and tuned for DB performance.  These storage cells are SQL-aware.  That is, if a SPARC T4 database compute node executes a query, it doesn't simply request tons of raw datablocks from the storage, filters the received data, and throws away most of it where the statement doesn't apply, but provides the SQL query to the storage node too. The storage cell software speaks SQL, that is, it is able to prefilter and through that transfer only the relevant data. With this, the traffic between database nodes and storage cells is reduced immensely. Less I/O is a good thing - as they say, all the CPUs of the world do one thing just as fast as any other - and that is waiting for I/O.  They don't only pre-filter, but also provide data preprocessing features - e.g. if a DB-node requests an aggregate of data, they can calculate it, and handover only the results, not the whole set. Again, less data to transfer.  They support the magical HCC, (Hybrid Columnar Compression). That is, data can be stored in a precompressed form on the storage. Less data to transfer.  Of course one can't simply rely on disks for performance, there is Flash Storage included there for caching.  III. The low latency, high-speed backbone network: InfiniBand, that interconnects all the members with: Real High Speed: 40 Gbit/s. Full Duplex, of course. Oh, and a really low latency.  RDMA. Remote Direct Memory Access. This technology allows the DB nodes to do exactly that. Remotely, directly placing SQL commands into the Memory of the storage cells. Dodging all the network-stack bottlenecks, avoiding overhead, placing requests directly into the process queue.  You can also run IP over InfiniBand if you please - that's the way the compute nodes can communicate with each other.  IV. Including a general-purpose storage too: the ZFSSA, which is a unified storage, providing NAS and SAN access too, with the following features:  NFS over RDMA over InfiniBand. Nothing is faster network-filesystem-wise.  All the ZFS features onboard, hybrid storage pools, compression, deduplication, snapshot, replication, NFS and CIFS shares Storageheads in a HA-Cluster configuration providing availability of the data  DTrace Live Analytics in a web-based Administration UI Being a general purpose application data storage for your non-database applications running on the SPARC SuperCluster over whichever protocol they prefer, easily replicating, snapshotting, cloning data for them.  There's a lot of great technology included in Oracle's SPARC SuperCluster, we have talked its interior through. As for external scalability: you can start with a half- of full- rack SPARC SuperCluster, and scale out to several racks - that is, stacking not separate full-rack SPARC SuperClusters, but extending always one large instance of the size of several full-racks. Yes, over InfiniBand network. Add racks as you grow.  What technologies shall run on it? SPARC SuperCluster is a general purpose scaleout consolidation/cloud environment. You can run Oracle Databases with RAC scaling, or Oracle Weblogic (end enjoy the SPARC T4's advantages to run Java). Remember, Oracle technologies have been integrated with the Oracle Engineered Systems - this is the Oracle on Oracle advantage. But you can run other software environments such as SAP if you please too. Run any application that runs on Oracle Solaris 10 or Solaris 11. Separate them in Virtual Machines, or even Oracle Solaris Zones, monitor and manage those from a central UI. Here the key takeaways once again: The SPARC SuperCluster: Is a pre-integrated Engineered System Contains SPARC T4-4 servers with built-in virtualization, cryptography, dynamic threading Contains the Exadata storage cells that intelligently offload the burden of the DB-nodes  Contains a highly available ZFS Storage Appliance, that provides SAN/NAS storage in a unified way Combines all these elements over a high-speed, low-latency backbone network implemented with InfiniBand Can grow from a single half-rack to several full-rack size Supports the consolidation of hundreds of applications To summarize: All these technologies are great by themselves, but the real value is like in every other Oracle Engineered System: Integration. All these technologies are tuned to perform together. Together they are way more than the sum of all - and a careful and actually very time consuming integration process is necessary to orchestrate all these for performance. The SPARC SuperCluster's goal is to enable infrastructure operations and offer a pre-integrated solution that can be architected and delivered in hours instead of months of evaluations and tests. The tedious and most importantly time and resource consuming part of the work - testing and evaluating - has been done.  Now go, provide services.   -- charlie  

    Read the article

  • Can you help me fix my broken packages?

    - by Andreas Hartmann
    I would like to upgrade from 13.04 to 13.10, but some broken packages are preventing upgrade success: grep Broken /var/log/dist-upgrade/apt.log output: Broken libwayland-client0:amd64 Conflicts on libwayland0 [ amd64 ] < 1.0.5-0ubuntu1 > ( libs ) (< 1.1.0) Broken libunity9:amd64 Breaks on unity-common [ amd64 ] < 7.0.0daily13.06.19~13.04-0ubuntu1 > ( gnome ) (< 7.1.2) Broken cups-filters:amd64 Conflicts on ghostscript-cups [ amd64 ] < 9.07~dfsg2-0ubuntu3.1 > ( text ) Broken libpam-systemd:amd64 Conflicts on libpam-xdg-support [ amd64 ] < 0.2-0ubuntu2 > ( admin ) Broken libharfbuzz0a:amd64 Breaks on libharfbuzz0 [ amd64 ] < 0.9.13-1 > ( libs ) Broken libharfbuzz0a:amd64 Breaks on libharfbuzz0 [ i386 ] < 0.9.13-1 > ( libs ) Broken libunity-scopes-json-def-desktop:amd64 Conflicts on libunity-common [ amd64 ] < 6.90.2daily13.04.05-0ubuntu1 > ( gnome ) (< 7.0.7) Broken libunity-scopes-json-def-desktop:amd64 Conflicts on libunity-common [ i386 ] < none > ( none ) (< 7.0.7) Broken libaccount-plugin-generic-oauth:amd64 Conflicts on account-plugin-generic-oauth [ amd64 ] < 0.10bzr13.03.26-0ubuntu1.1 > ( gnome ) (< 0.10bzr13.04.30) Broken libaccount-plugin-generic-oauth:amd64 Breaks on account-plugin-generic-oauth [ amd64 ] < 0.10bzr13.03.26-0ubuntu1.1 > ( gnome ) (< 0.10bzr13.04.30) Broken libmutter0b:amd64 Breaks on libmutter0a [ amd64 ] < 3.6.3-0ubuntu2 > ( libs ) Broken python3-aptdaemon.pkcompat:amd64 Breaks on libpackagekit-glib2-14 [ amd64 ] < 0.7.6-3ubuntu1 > ( libs ) (<= 0.7.6-4) Broken apache2:amd64 Conflicts on apache2.2-common [ amd64 ] < 2.2.22-6ubuntu5.1 > ( httpd ) Broken chromium-codecs-ffmpeg-extra:amd64 Conflicts on chromium-codecs-ffmpeg [ amd64 ] < 28.0.1500.71-0ubuntu1.13.04.1 -> 29.0.1547.65-0ubuntu2 > ( universe/web ) Broken unity-scope-home:amd64 Conflicts on unity-lens-shopping [ amd64 ] < 6.8.0daily13.03.04-0ubuntu1 > ( gnome ) Broken libsnmp30:amd64 Breaks on libsnmp15 [ amd64 ] < 5.4.3~dfsg-2.7ubuntu1 > ( libs ) Broken apache2.2-bin:amd64 Breaks on gnome-user-share [ amd64 ] < 3.0.4-0ubuntu1 > ( gnome ) (< 3.8.0-2~) Broken libgjs0d:amd64 Conflicts on libgjs0c [ amd64 ] < 1.34.0-0ubuntu1 > ( libs ) Broken unity-gtk2-module:amd64 Conflicts on appmenu-gtk [ amd64 ] < 12.10.3daily13.04.03-0ubuntu1 > ( libs ) Broken lib32asound2:amd64 Depends on libasound2 [ amd64 ] < 1.0.25-4ubuntu3.1 -> 1.0.27.2-1ubuntu6 > ( libs ) (= 1.0.25-4ubuntu3.1) Broken unity-gtk3-module:amd64 Conflicts on appmenu-gtk3 [ amd64 ] < 12.10.3daily13.04.03-0ubuntu1 > ( libs ) Broken activity-log-manager:amd64 Conflicts on activity-log-manager-common [ amd64 ] < 0.9.4-0ubuntu6.2 > ( utils ) Broken libgtksourceview-3.0-0:amd64 Depends on libgtksourceview-3.0-common [ amd64 ] < 3.6.3-0ubuntu1 -> 3.8.2-0ubuntu1 > ( libs ) (< 3.7) Broken icaclient:amd64 Depends on lib32asound2 [ amd64 ] < 1.0.25-4ubuntu3.1 > ( libs ) Broken libunity-core-6.0-5:amd64 Depends on unity-services [ amd64 ] < 7.0.0daily13.06.19~13.04-0ubuntu1 -> 7.1.2+13.10.20131014.1-0ubuntu1 > ( gnome ) (= 7.0.0daily13.06.19~13.04-0ubuntu1) Broken libbamf3-1:amd64 Depends on bamfdaemon [ amd64 ] < 0.4.0daily13.06.19~13.04-0ubuntu1 -> 0.5.1+13.10.20131011-0ubuntu1 > ( libs ) (= 0.4.0daily13.06.19~13.04-0ubuntu1) Broken apache2-bin:amd64 Conflicts on apache2.2-bin [ amd64 ] < 2.2.22-6ubuntu5.1 -> 2.4.6-2ubuntu2 > ( httpd ) (< 2.3~) Output for cat /etc/apt/sources.list /etc/apt/sources.list.d/*.list # deb cdrom:[Ubuntu 13.04 _Raring Ringtail_ - Release amd64 (20130424)]/ raring main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://de.archive.ubuntu.com/ubuntu/ raring main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://de.archive.ubuntu.com/ubuntu/ raring-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://de.archive.ubuntu.com/ubuntu/ raring universe deb http://de.archive.ubuntu.com/ubuntu/ raring-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://de.archive.ubuntu.com/ubuntu/ raring multiverse deb http://de.archive.ubuntu.com/ubuntu/ raring-updates multiverse ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. deb http://security.ubuntu.com/ubuntu raring-security main restricted deb http://security.ubuntu.com/ubuntu raring-security universe deb http://security.ubuntu.com/ubuntu raring-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu raring partner # deb-src http://archive.canonical.com/ubuntu raring partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu raring main # deb-src http://extras.ubuntu.com/ubuntu raring main # deb http://linux.dropbox.com/ubuntu precise main output for sudo dpkg -l | grep -e "^iU" -e "^rc": rc ibm-lotus-cae 8.5.2-20100805.0821 i386 IBM Lotus Composite Application Editor rc ibm-lotus-cae-nl1 8.5.2-20100805.0821 i386 IBM Lotus CAE NL1 rc ibm-lotus-feedreader 8.5.2-20100805.0821 i386 Feeds for IBM Lotus Notes 8.5.2 rc ibm-lotus-feedreader-nl1 8.5.2-20100805.0821 i386 IBM Lotus Feed Reader NL1 rc ibm-lotus-notes 8.5.2-20100805.0821 i386 IBM Lotus Notes rc ibm-lotus-notes-core-de 8.5.2-20100805.0821 i386 IBM Lotus Notes Native German (de) rc ibm-lotus-notes-nl1 8.5.2-20100805.0821 i386 IBM Lotus Notes Java NL1 rc ibm-lotus-sametime 8.5.2-20100805.0821 i386 IBM Lotus Sametime rc ibm-lotus-symphony 8.5.2-20100805.0821 i386 IBM Lotus Symphony rc ibm-lotus-symphony-nl1 8.5.2-20100805.0821 i386 IBM Lotus Symphony NL1 rc libapache2-mod-php5filter 5.4.9-4ubuntu2.2 amd64 server-side, HTML-embedded scripting language (apache 2 filter module) rc libavcodec53:amd64 6:0.8.6-1ubuntu2 amd64 Libav codec library rc libavutil51:amd64 6:0.8.6-1ubuntu2 amd64 Libav utility library rc libmotif4:amd64 2.3.3-7ubuntu1 amd64 Open Motif - shared libraries rc linux-image-3.8.0-25-generic 3.8.0-25.37 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-25-generic 3.8.0-25.37 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP

    Read the article

  • CodePlex Daily Summary for Tuesday, July 02, 2013

    CodePlex Daily Summary for Tuesday, July 02, 2013Popular ReleasesMastersign.Expressions: Mastersign.Expressions v0.4.2: added support for if(<cond>, <true-part>, <false-part>) fixed multithreading issue with rand() improved demo applicationNB_Store - Free DotNetNuke Ecommerce Catalog Module: NB_Store v2.3.6 Rel0: v2.3.6 Is now DNN6 and DNN7 compatible Important : During update this install with overwrite the menu.xml setting, if you have changed this then make a backup before you upgrade and reapply your changes after the upgrade. Please view the following documentation if you are installing and configuring this module for the first time System Requirements Skill requirements Downloads and documents Step by step guide to a working store Please ask all questions in the Discussions tab. Document.Editor: 2013.26: What's new for Document.Editor 2013.26: New Insert Chart Improved User Interface Minor Bug Fix's, improvements and speed upsWsus Package Publisher: Release V1.2.1307.01: Fix an issue in the UI, approvals are not shown correctly in the 'Report' tabDirectX Tool Kit: July 2013: July 1, 2013 VS 2013 Preview projects added and updates for DirectXMath 3.05 vectorcall Added use of sRGB WIC metadata for JPEG, PNG, and TIFF SaveToWIC functions updated with new optional setCustomProps parameter and error check with optional targetFormatCore Server 2012 Powershell Script Hyper-v Manager: new_root.zip: Verison 1.0JSON Toolkit: JSON Toolkit 4.1.736: Improved strinfigy performance New serializing feature New anonymous type support in constructorsDotNetNuke® IFrame: IFrame 04.05.00: New DNN6/7 Manifest file and Azure Compatibility.VidCoder: 1.5.2 Beta: Fixed crash on presets with an invalid bitrate.Gardens Point LEX: Gardens Point LEX version 1.2.1: The main distribution is a zip file. This contains the binary executable, documentation, source code and the examples. ChangesVersion 1.2.1 has new facilities for defining and manipulating character classes. These changes make the construction of large Unicode character classes more convenient. The runtime code for performing automaton backup has been re-implemented, and is now faster for scanners that need backup. Source CodeThe distribution contains a complete VS2010 project for the appli...ZXMAK2: Version 2.7.5.7: - fix TZX emulation (Bruce Lee, Zynaps) - fix ATM 16 colors for border - add memory module PROFI 512K; add PROFI V03 rom image; fix PROFI 3.XX configTwitter image Downloader: Twitter Image Downloader 2 with Installer: Application file with Install shield and Dot Net 4.0 redistributableUltimate Music Tagger: Ultimate Music Tagger 1.0.0.0: First release of Ultimate Music TaggerBlackJumboDog: Ver5.9.2: 2013.06.28 Ver5.9.2 (1) ??????????(????SMTP?????)?????????? (2) HTTPS???????????Outlook 2013 Add-In: Configuration Form: This new version includes the following changes: - Refactored code a bit. - Removing configuration from main form to gain more space to display items. - Moved configuration to separate form. You can click the little "gear" icon to access the configuration form (still very simple). - Added option to show past day appointments from the selected day (previous in time, that is). - Added some tooltips. You will have to uninstall the previous version (add/remove programs) if you had installed it ...Terminals: Version 3.0 - Release: Changes since version 2.0:Choose 100% portable or installed version Removed connection warning when running RDP 8 (Windows 8) client Fixed Active directory search Extended Active directory search by LDAP filters Fixed single instance mode when running on Windows Terminal server Merged usage of Tags and Groups Added columns sorting option in tables No UAC prompts on Windows 7 Completely new file persistence data layer New MS SQL persistence layer (Store data in SQL database)...NuGet: NuGet 2.6: Released June 26, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.6Python Tools for Visual Studio: 2.0 Beta: We’re pleased to announce the release of Python Tools for Visual Studio 2.0 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, and cross platform debugging support. For a quick overview of the general IDE experience, please watch this video: http://www.youtube.com/watch?v=TuewiStN...Player Framework by Microsoft: Player Framework for Windows 8 and WP8 (v1.3 beta): Preview: New MPEG DASH adaptive streaming plugin for Windows Azure Media Services Preview: New Ultraviolet CFF plugin. Preview: New WP7 version with WP8 compatibility. (source code only) Source code is now available via CodePlex Git Misc bug fixes and improvements: WP8 only: Added optional fullscreen and mute buttons to default xaml JS only: protecting currentTime from returning infinity. Some videos would cause currentTime to be infinity which could cause errors in plugins expectin...AssaultCube Reloaded: 2.5.8: SERVER OWNERS: note that the default maprot has changed once again. Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we continue to try to package for those OSes. Or better yet, try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compi...New ProjectsALM Rangers DevOps Tooling and Guidance: Practical tooling and guidance that will enable teams to realize a faster deployment based on continuous feedback.Core Server 2012 Powershell Script Hyper-v Manager: Free core Server 2012 powershell scripts and batch files that replace the non-existent hyper-v manager, vmconnect and mstsc.Enhanced Deployment Service (EDS): EDS is a web service based utility designed to extend the deployment capabilities of administrators with the Microsoft Deployment Toolkit.ExtendedDialogBox: Libreria DialogBoxJazdy: This project is here only because we wanted to take advantage of a public git server.Mon Examen: This web interface is meant to make examinationsneet: summaryOrchard Multi-Choice Voting: A multiple choice voting Orchard module.Particle Swarm Optimization Solving Quadratic Assignment Problem: This project is submitted for the solving of QAP using PSO algorithms with addition of some modification Porjects: 23123123PPL Power Pack: PPL Power PackProperty Builder: Visual Studio tool for speeding up process of coding class properties getters and setters.RedRuler for Redline: I tried some on-screen rulers, none of them help me measure the UI element quickly based on the Redline. So I decided to created this handy RedRuler tool. Royale Living: Mahindra Royale Community PortalSearch and booking Hotel or Tours: Ð? án nghiên c?u c?a sinh viên tdt theo mô hình mvc 4SystemBuilder.Show: This tool is a helper after you create your project in visual studio to create the respective objects and interface. TalentDesk: new ptojectTcmplex: The Training Center teaches many different kind of course such as English, French, Computer hardware and computer softwareTFS Reporting Guide: Provides guidance and samples to enable TFS users to generate reports based on WIT data.Umbraco AdaptiveImages: Adaptive Images Package for UmbracoVirtualNet - A ILcode interpreter/emulator written in C++/Assembly: VirtualNet is a interpreter/emulator for running .net code in native without having to install the .Net FrameWorkVisual Blocks: Visual Blocks ????IDE ????? ??????? ????? ????/?? Visual Studio and Cloud Based Mobile Device Testing: Practical guidance enabling field to remove blockers to adoption and to use and extend the Perfecto Mobile Cloud Device testing within the context of VS.Windows 8 Time Picker for Windows Phone: A Windows Phone implementation of the Time Picker control found in the Windows 8.1 Alarms app.???? - SmallBasic?: ?????????

    Read the article

  • Design for complex ATG applications

    - by Glen Borkowski
    Overview Needless to say, some ATG applications are more complex than others.  Some ATG applications support a single site, single language, single catalog, single currency, have a single development staff, single business team, and a relatively simple business model.  The real complex applications have to support multiple sites, multiple languages, multiple catalogs, multiple currencies, a couple different development teams, multiple business teams, and a highly complex business model (and processes to go along with it).  While it's still important to implement a proper design for simple applications, it's absolutely critical to do this for the complex applications.  Why?  It's all about time and money.  If you are unable to manage your complex applications in an efficient manner, the cost of managing it will increase dramatically as will the time to get things done (time to market).  On the positive side, your competition is most likely in the same situation, so you just need to be more efficient than they are. This article is intended to discuss a number of key areas to think about when designing complex applications on ATG.  Some of this can get fairly technical, so it may help to get some background first.  You can get enough of the required background information from this post.  After reading that, come back here and follow along. Application Design Of all the various types of ATG applications out there, the most complex tend to be the ones in the telecommunications industry - especially the ones which operate in multiple countries.  To get started, let's assume that we are talking about an application like that.  One that has these properties: Operates in multiple countries - must support multiple sites, catalogs, languages, and currencies The organization is fairly loosely-coupled - single brand, but different businesses across different countries There is some common functionality across all sites in all countries There is some common functionality across different sites within the same country Sites within a single country may have some unique functionality - relative to other sites in the same country Complex product catalog (mostly in terms of bundles, eligibility, and compatibility) At this point, I'll assume you have read through the required reading and have a decent understanding of how ATG modules work... Code / configuration - assemble into modules When it comes to defining your modules for a complex application, there are a number of goals: Divide functionality between the modules in a way that maps to your business Group common functionality 'further down in the stack of modules' Provide a good balance between shared resources and autonomy for countries / sites Now I'll describe a high level approach to how you could accomplish those goals...  Let's start from the bottom and work our way up.  At the very bottom, you have the modules that ship with ATG - the 'out of the box' stuff.  You want to make sure that you are leveraging all the modules that make sense in order to get the most value from ATG as possible - and less stuff you'll have to write yourself.  On top of the ATG modules, you should create what we'll refer to as the Corporate Foundation Module described as follows: Sits directly on top of ATG modules Used by all applications across all countries and sites - this is the foundation for everyone Contains everything that is common across all countries / all sites Once established and settled, will change less frequently than other 'higher' modules Encapsulates as many enterprise-wide integrations as possible Will provide means of code sharing therefore less development / testing - faster time to market Contains a 'reference' web application (described below) The next layer up could be multiple modules for each country (you could replace this with region if that makes more sense).  We'll define those modules as follows: Sits on top of the corporate foundation module Contains what is unique to all sites in a given country Responsible for managing any resource bundles for this country (to handle multiple languages) Overrides / replaces corporate integration points with any country-specific ones Finally, we will define what should be a fairly 'thin' (in terms of functionality) set of modules for each site as follows: Sits on top of the country it resides in module Contains what is unique for a given site within a given country Will mostly contain configuration, but could also define some unique functionality as well Contains one or more web applications The graphic below should help to indicate how these modules fit together: Web applications As described in the previous section, there are many opportunities for sharing (minimizing costs) as it relates to the code and configuration aspects of ATG modules.  Web applications are also contained within ATG modules, however, sharing web applications can be a bit more difficult because this is what the end customer actually sees, and since each site may have some degree of unique look & feel, sharing becomes more challenging.  One approach that can help is to define a 'reference' web application at the corporate foundation layer to act as a solid starting point for each site.  Here's a description of the 'reference' web application: Contains minimal / sample reference styling as this will mostly be addressed at the site level web app Focus on functionality - ensure that core functionality is revealed via this web application Each individual site can use this as a starting point There may be multiple types of web apps (i.e. B2C, B2B, etc) There are some techniques to share web application assets - i.e. multiple web applications, defined in the web.xml, and it's worth investigating, but is out of scope here. Reference infrastructure In this complex environment, it is assumed that there is not a single infrastructure for all countries and all sites.  It's more likely that different countries (or regions) could have their own solution for infrastructure.  In this case, it will be advantageous to define a reference infrastructure which contains all the hardware and software that make up the core environment.  Specifications and diagrams should be created to outline what this reference infrastructure looks like, as well as it's baseline cost and the incremental cost to scale up with volume.  Having some consistency in terms of infrastructure will save time and money as new countries / sites come online.  Here are some properties of the reference infrastructure: Standardized approach to setup of hardware Type and number of servers Defines application server, operating system, database, etc... - including vendor and specific versions Consistent naming conventions Provides a consistent base of terminology and understanding across environments Defines which ATG services run on which servers Production Staging BCC / Preview Each site can change as required to meet scale requirements Governance / organization It should be no surprise that the complex application we're talking about is backed by an equally complex organization.  One of the more challenging aspects of efficiently managing a series of complex applications is to ensure the proper level of governance and organization.  Here are some ideas and goals to work towards: Establish a committee to make enterprise-wide decisions that affect all sites Representation should be evenly distributed Should have a clear communication procedure Focus on high level business goals Evaluation of feature / function gaps and how that relates to ATG release schedule / roadmap Determine when to upgrade & ensure value will be realized Determine how to manage various levels of modules Who is responsible for maintaining corporate / country / site layers Determine a procedure for controlling what goes in the corporate foundation module Standardize on source code control, database, hardware, OS versions, J2EE app servers, development procedures, etc only use tested / proven versions - this is something that should be centralized so that every country / site does not have to worry about compatibility between versions Create a innovation team Quickly develop new features, perform proof of concepts All teams can benefit from their findings Summary At this point, it should be clear why the topics above (design, governance, organization, etc) are critical to being able to efficiently manage a complex application.  To summarize, it's all about competitive advantage...  You will need to reduce costs and improve time to market with the goal of providing a better experience for your end customers.  You can reduce cost by reducing development time, time allocated to testing (don't have to test the corporate foundation module over and over again - do it once), and optimizing operations.  With an efficient design, you can improve your time to market and your business will be more flexible  and agile.  Over time, you'll find that you're becoming more focused on offering functionality that is new to the market (creativity) and this will be rewarded - you're now a leader. In addition to the above, you'll realize soft benefits as well.  Your staff will be operating in a culture based on sharing.  You'll want to reward efforts to improve and enhance the foundation as this will benefit everyone.  This culture will inspire innovation, which can only lend itself to your competitive advantage.

    Read the article

  • Retrieving a list of eBay categories using the .NET SDK and GetCategoriesCall

    - by Bill Osuch
    eBay offers a .Net SDK for its Trading API - this post will show you the basics of making an API call and retrieving a list of current categories. You'll need the category ID(s) for any apps that post or search eBay. To start, download the latest SDK from https://www.x.com/developers/ebay/documentation-tools/sdks/dotnet and create a new console app project. Add a reference to the eBay.Service DLL, and a few using statements: using eBay.Service.Call; using eBay.Service.Core.Sdk; using eBay.Service.Core.Soap; I'm assuming at this point you've already joined the eBay Developer Network and gotten your app IDs and user tokens. If not: Join the developer program Generate tokens Next, add an app.config file that looks like this: <?xml version="1.0"?> <configuration>   <appSettings>     <add key="Environment.ApiServerUrl" value="https://api.ebay.com/wsapi"/>     <add key="UserAccount.ApiToken" value="YourBigLongToken"/>   </appSettings> </configuration> And then add the code to get the xml list of categories: ApiContext apiContext = GetApiContext(); GetCategoriesCall apiCall = new GetCategoriesCall(apiContext); apiCall.CategorySiteID = "0"; //Leave this commented out to retrieve all category levels (all the way down): //apiCall.LevelLimit = 4; //Uncomment this to begin at a specific parent category: //StringCollection parentCategories = new StringCollection(); //parentCategories.Add("63"); //apiCall.CategoryParent = parentCategories; apiCall.DetailLevelList.Add(DetailLevelCodeType.ReturnAll); CategoryTypeCollection cats = apiCall.GetCategories(); using (StreamWriter outfile = new StreamWriter(@"C:\Temp\EbayCategories.xml")) {    outfile.Write(apiCall.SoapResponse); } GetApiContext() (provided in the sample apps in the SDK) is required for any call:         static ApiContext GetApiContext()         {             //apiContext is a singleton,             //to avoid duplicate configuration reading             if (apiContext != null)             {                 return apiContext;             }             else             {                 apiContext = new ApiContext();                 //set Api Server Url                 apiContext.SoapApiServerUrl = ConfigurationManager.AppSettings["Environment.ApiServerUrl"];                 //set Api Token to access eBay Api Server                 ApiCredential apiCredential = new ApiCredential();                 apiCredential.eBayToken = ConfigurationManager.AppSettings["UserAccount.ApiToken"];                 apiContext.ApiCredential = apiCredential;                 //set eBay Site target to US                 apiContext.Site = SiteCodeType.US;                 return apiContext;             }         } Running this will give you a large (4 or 5 megs) XML file that looks something like this: <soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">    <soapenv:Body>       <GetCategoriesResponse >          <Timestamp>2012-06-06T16:03:46.158Z</Timestamp>          <Ack>Success</Ack>          <CorrelationID>d02dd9e3-295a-4268-9ea5-554eeb2e0e18</CorrelationID>          <Version>775</Version>          <Build>E775_CORE_BUNDLED_14891042_R1</Build> -          <CategoryArray>             <Category>                <BestOfferEnabled>true</BestOfferEnabled>                <AutoPayEnabled>true</AutoPayEnabled>                <CategoryID>20081</CategoryID>                <CategoryLevel>1</CategoryLevel>                <CategoryName>Antiques</CategoryName>                <CategoryParentID>20081</CategoryParentID>             </Category>             <Category>                <BestOfferEnabled>true</BestOfferEnabled>                <AutoPayEnabled>true</AutoPayEnabled>                <CategoryID>37903</CategoryID>                <CategoryLevel>2</CategoryLevel>                <CategoryName>Antiquities</CategoryName>                <CategoryParentID>20081</CategoryParentID>             </Category> (etc.) You could work with this, but I wanted a nicely nested view, like this: <CategoryArray>    <Category Name='Antiques' ID='20081' Level='1'>       <Category Name='Antiquities' ID='37903' Level='2'/> </CategoryArray> ...so I transformed the xml: private void TransformXML(CategoryTypeCollection cats)         {             XmlElement topLevelElement = null;             XmlElement childLevelElement = null;             XmlNode parentNode = null;             string categoryString = "";             XmlDocument returnDoc = new XmlDocument();             XmlElement root = returnDoc.CreateElement("CategoryArray");             returnDoc.AppendChild(root);             XmlNode rootNode = returnDoc.SelectSingleNode("/CategoryArray");             //Loop through CategoryTypeCollection             foreach (CategoryType category in cats)             {                 if (category.CategoryLevel == 1)                 {                     //Top-level category, so we know we can just add it                     topLevelElement = returnDoc.CreateElement("Category");                     topLevelElement.SetAttribute("Name", category.CategoryName);                     topLevelElement.SetAttribute("ID", category.CategoryID);                     rootNode.AppendChild(topLevelElement);                 }                 else                 {                     // Level number will determine how many Category nodes we are deep                     categoryString = "";                     for (int x = 1; x < category.CategoryLevel; x++)                     {                         categoryString += "/Category";                     }                     parentNode = returnDoc.SelectSingleNode("/CategoryArray" + categoryString + "[@ID='" + category.CategoryParentID[0] + "']");                     childLevelElement = returnDoc.CreateElement("Category");                     childLevelElement.SetAttribute("Name", category.CategoryName);                     childLevelElement.SetAttribute("ID", category.CategoryID);                     parentNode.AppendChild(childLevelElement);                 }             }             returnDoc.Save(@"C:\Temp\EbayCategories-Modified.xml");         } Yes, there are probably much cleaner ways of dealing with it, but I'm not an xml expert… Keep in mind, eBay categories do not change on a regular basis, so you should be able to cache this data (either in a file or database) for some time. The xml returns a CategoryVersion node that you can use to determine if the category list has changed. Technorati Tags: Csharp, eBay

    Read the article

  • NUMA-aware placement of communication variables

    - by Dave
    For classic NUMA-aware programming I'm typically most concerned about simple cold, capacity and compulsory misses and whether we can satisfy the miss by locally connected memory or whether we have to pull the line from its home node over the coherent interconnect -- we'd like to minimize channel contention and conserve interconnect bandwidth. That is, for this style of programming we're quite aware of where memory is homed relative to the threads that will be accessing it. Ideally, a page is collocated on the node with the thread that's expected to most frequently access the page, as simple misses on the page can be satisfied without resorting to transferring the line over the interconnect. The default "first touch" NUMA page placement policy tends to work reasonable well in this regard. When a virtual page is first accessed, the operating system will attempt to provision and map that virtual page to a physical page allocated from the node where the accessing thread is running. It's worth noting that the node-level memory interleaving granularity is usually a multiple of the page size, so we can say that a given page P resides on some node N. That is, the memory underlying a page resides on just one node. But when thinking about accesses to heavily-written communication variables we normally consider what caches the lines underlying such variables might be resident in, and in what states. We want to minimize coherence misses and cache probe activity and interconnect traffic in general. I don't usually give much thought to the location of the home NUMA node underlying such highly shared variables. On a SPARC T5440, for instance, which consists of 4 T2+ processors connected by a central coherence hub, the home node and placement of heavily accessed communication variables has very little impact on performance. The variables are frequently accessed so likely in M-state in some cache, and the location of the home node is of little consequence because a requester can use cache-to-cache transfers to get the line. Or at least that's what I thought. Recently, though, I was exploring a simple shared memory point-to-point communication model where a client writes a request into a request mailbox and then busy-waits on a response variable. It's a simple example of delegation based on message passing. The server polls the request mailbox, and having fetched a new request value, performs some operation and then writes a reply value into the response variable. As noted above, on a T5440 performance is insensitive to the placement of the communication variables -- the request and response mailbox words. But on a Sun/Oracle X4800 I noticed that was not the case and that NUMA placement of the communication variables was actually quite important. For background an X4800 system consists of 8 Intel X7560 Xeons . Each package (socket) has 8 cores with 2 contexts per core, so the system is 8x8x2. Each package is also a NUMA node and has locally attached memory. Every package has 3 point-to-point QPI links for cache coherence, and the system is configured with a twisted ladder "mobius" topology. The cache coherence fabric is glueless -- there's not central arbiter or coherence hub. The maximum distance between any two nodes is just 2 hops over the QPI links. For any given node, 3 other nodes are 1 hop distant and the remaining 4 nodes are 2 hops distant. Using a single request (client) thread and a single response (server) thread, a benchmark harness explored all permutations of NUMA placement for the two threads and the two communication variables, measuring the average round-trip-time and throughput rate between the client and server. In this benchmark the server simply acts as a simple transponder, writing the request value plus 1 back into the reply field, so there's no particular computation phase and we're only measuring communication overheads. In addition to varying the placement of communication variables over pairs of nodes, we also explored variations where both variables were placed on one page (and thus on one node) -- either on the same cache line or different cache lines -- while varying the node where the variables reside along with the placement of the threads. The key observation was that if the client and server threads were on different nodes, then the best placement of variables was to have the request variable (written by the client and read by the server) reside on the same node as the client thread, and to place the response variable (written by the server and read by the client) on the same node as the server. That is, if you have a variable that's to be written by one thread and read by another, it should be homed with the writer thread. For our simple client-server model that means using split request and response communication variables with unidirectional message flow on a given page. This can yield up to twice the throughput of less favorable placement strategies. Our X4800 uses the QPI 1.0 protocol with source-based snooping. Briefly, when node A needs to probe a cache line it fires off snoop requests to all the nodes in the system. Those recipients then forward their response not to the original requester, but to the home node H of the cache line. H waits for and collects the responses, adjudicates and resolves conflicts and ensures memory-model ordering, and then sends a definitive reply back to the original requester A. If some node B needed to transfer the line to A, it will do so by cache-to-cache transfer and let H know about the disposition of the cache line. A needs to wait for the authoritative response from H. So if a thread on node A wants to write a value to be read by a thread on node B, the latency is dependent on the distances between A, B, and H. We observe the best performance when the written-to variable is co-homed with the writer A. That is, we want H and A to be the same node, as the writer doesn't need the home to respond over the QPI link, as the writer and the home reside on the very same node. With architecturally informed placement of communication variables we eliminate at least one QPI hop from the critical path. Newer Intel processors use the QPI 1.1 coherence protocol with home-based snooping. As noted above, under source-snooping a requester broadcasts snoop requests to all nodes. Those nodes send their response to the home node of the location, which provides memory ordering, reconciles conflicts, etc., and then posts a definitive reply to the requester. In home-based snooping the snoop probe goes directly to the home node and are not broadcast. The home node can consult snoop filters -- if present -- and send out requests to retrieve the line if necessary. The 3rd party owner of the line, if any, can respond either to the home or the original requester (or even to both) according to the protocol policies. There are myriad variations that have been implemented, and unfortunately vendor terminology doesn't always agree between vendors or with the academic taxonomy papers. The key is that home-snooping enables the use of a snoop filter to reduce interconnect traffic. And while home-snooping might have a longer critical path (latency) than source-based snooping, it also may require fewer messages and less overall bandwidth. It'll be interesting to reprise these experiments on a platform with home-based snooping. While collecting data I also noticed that there are placement concerns even in the seemingly trivial case when both threads and both variables reside on a single node. Internally, the cores on each X7560 package are connected by an internal ring. (Actually there are multiple contra-rotating rings). And the last-level on-chip cache (LLC) is partitioned in banks or slices, which with each slice being associated with a core on the ring topology. A hardware hash function associates each physical address with a specific home bank. Thus we face distance and topology concerns even for intra-package communications, although the latencies are not nearly the magnitude we see inter-package. I've not seen such communication distance artifacts on the T2+, where the cache banks are connected to the cores via a high-speed crossbar instead of a ring -- communication latencies seem more regular.

    Read the article

  • CodePlex Daily Summary for Monday, July 15, 2013

    CodePlex Daily Summary for Monday, July 15, 2013Popular ReleasesMVC Forum: MVC Forum v1.0: Finally version 1.0 is here! We have been fixing a few bugs, and making sure the release is as stable as possible. We have also changed the way configuration of the application works, mostly how to add your own code or replace some of the standard code with your own. If you download and use our software, please give us some sort of feedback, good or bad!SharePoint 2013 TypeScript Definitions: Release 1.1: TypeScript 0.9 support SharePoint TypeScript Definitions are now compliant with the new version of TypeScript TypeScript generics are now used for defining collection classes (derivatives of SP.ClientCollection object) Improved coverage Added mQuery definitions (m$) Added SPClientAutoFill definitions SP.Utilities namespace is now fully covered SP.UI modal dialog definitions improved CSR definitions improved, added some missing methods and context properties, mostly related to list ...GoAgent GUI: GoAgent GUI ??? 1.0.0: ????GoAgent GUI????,???????????.Net Framework 4.0 ???????: Windows 8 x64 Windows 8 x86 Windows 7 x64 Windows 7 x86 ???????: Windows 8.1 Preview (x86/x64) ???????: Windows XP ????: ????????GoAgent????,????????,?????????????,???????????????????,??????????,????。PiGraph: PiGraph 2.0.8.13: C?p nh?t:Các l?i dã s?a: S?a l?i không nh?p du?c s? âm. L?i tabindex trong giao di?n Thêm hàm Các l?i chua kh?c ph?c: L?i ghi chú nh?p nháy màu. L?i khung ghi chú vu?t ra kh?i biên khi luu file. Luu ý:N?u không kh?i d?ng duoc chuong trình, b?n nên c?p nh?t driver card d? h?a phiên b?n m?i nh?t: AMD Graphics Drivers NVIDIA Driver Xem yêu c?u h? th?ngD3D9Client: D3D9Client R12 for Orbiter Beta: D3D9Client release for orbiter BetaVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...Project Server 2013 Event Handler Admin Tool: PSI Event Admin Tool: Download & exract the File. Use LoggerAdmin to upload the event handlers in project server 2013. PSIEventLogger\LoggerAdmin\bin\DebugGherkin editor: Gherkin Editor Beta 2: Fix issue #7 and add some refactoring and code cleanupNew-NuGetPackage PowerShell Script: New-NuGetPackage.ps1 PowerShell Script v1.2: Show nuget gallery to push to when prompting user if they want to push their package.Site Templates By Steve: SharePoint 2010 CORE Site Theme By Steve WSP: Great Site Theme to start with from Steve. See project home page for install instructions. This is a nice centered, mega-menu, fixed width masterpage with styles. Remember to update the mega menu lists.SharePoint Solution Installer: SharePoint Solution Installer V1.2.8: setup2013.exe now supports CompatibilityLevel to target specific hive Use setup.exe for SP2007 & SP2010. Use setup2013.exe for SP2013.TBox - tool to make developer's life easier.: TBox 1.021: 1)Add console unit tests runner, to run unit tests in parallel from console. Also this new sub tool can save valid xml nunit report. It can help you in continuous integration. 2)Fix build scripts.LifeInSharepoint Modern UI Update: Version 2: Some minor improvements, including Audience Targeting support for quick launch links. Also removing all NextDocs references.Virtual Photonics: VTS MATLAB Package 1.0.13 Beta: This is the beta release of the MATLAB package with examples of using the VTS libraries within MATLAB. Changes for this release: Added two new examples to vts_solver_demo.m that: 1) generates and plots R(lambda) at a given rho, and chromophore concentrations assuming a power law for scattering, and 2) solves inverse problem for R(lambda) at given rho. This example solves for concentrations of HbO2, Hb and H20 given simulated measurements created using Nurbs scaled Monte Carlo and inverted u...Advanced Resource Tab for Blend: Advanced Resource Tab: This is the first alpha release of the advanced resource tab for Blend for Visual Studio 2012.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.96: Fix for issue #19957: EXE should output the name of the file(s) being minified. Discussion #449181: throw a Sev-2 warning when trailing commas are detected on an Array literal. Perfectly legal to do so, but the behavior ends up working differently on different browsers, so throw a cross-browser warning. Add a few more known global names for improved ES6 compatibility update Nuget package to version 2.5 and automatically add the AjaxMin.targets to your project when you update the package...Outlook 2013 Add-In: Categories and Colors: This new version has a major change in the drawing of the list items: - Using owner drawn code to format the appointments using GDI (some flickering may occur, but it looks a little bit better IMHO, with separate sections). - Added category color support (if more than one category, only one color will be shown). Here, the colors Outlook uses are slightly different than the ones available in System.Drawing, so I did a first approach matching. ;-) - Added appointment status support (to show fr...Columbus Remote Desktop: 2.0 Sapphire: Added configuration settings Added update notifications Added ability to disable GPU acceleration Fixed connection bugsLINQ to Twitter: LINQ to Twitter v2.1.07: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.DotNetNuke® Community Edition CMS: 06.02.08: Major Highlights Fixed issue where the application throws an Unhandled Error and an HTTP Response Code of 200 when the connection to the database is lost. Security FixesNone Updated Modules/Providers ModulesNone ProvidersNoneNew Projects[.Net Intl] harroc_c;mallar_a;olouso_f: The goal of this project is to create a web crawler and a web front who allows you to search in your index. You will create a mini (or large!) search engine basButterfly Storage: Butterfly Storage is a data access technology based on object-oriented database model for Windows Store applications.KaveCompany: KaveCompleave that girl alone: a team project!MyClrProfiler: This project helps you learn about and develop your own CLR profiler.NETDeob: Deobfuscate obfuscated .NET files easilyProgram stomatologie: SummarySimple Graph Library: Simple portable class library for graphs data structures. .NET, Silverlight 4/5, Windows Phone, Windows RT, Xbox 360T6502 Emulator: T6502 is a 6502 emulator written in TypeScript using AngularJS. The goal is well-organized, readable code over performance.WP8 File Access Webserver: C# HTTP server and web application on Windows Phone 8. Implements file access, browsing and downloading.wpadk: wpadk????wp7?????? ?????????,?????、SDK、wpadk?????????????。??????????????????。??????????????????,????wpadk?????????????????????????????????????。xlmUnit: xlmUnit, Unit Testing

    Read the article

  • Let your Signature Experience drive IT-decision making

    - by Tania Le Voi
    Today’s CIO job description:  ‘’Align IT infrastructure and solutions with business goals and objectives ; AND while doing so reduce costs; BUT ALSO, be innovative, ensure the architectures are adaptable and agile as we need to act today on the changes that we may request tomorrow.”   Sound like an unachievable request? The fact is, reality dictates that CIO’s are put under this type of pressure to deliver more with less. In a past career phase I spent a few years as an IT Relationship Manager for a large Insurance company. This is a role that we see all too infrequently in many of our customers, and it’s a shame.  The purpose of this role was to build a bridge, a relationship between IT and the business. Key to achieving that goal was to ensure the same language was being spoken and more importantly that objectives were commonly understood - hence service and projects were delivered to time, to budget and actually solved the business problems. In reality IT and the business are already married, but the relationship is most often defined as ‘supplier’ of IT rather than a ‘trusted partner’. To deliver business value they need to understand how to work together effectively to attain this next level of partnership. The Business cannot compete if they do not get a new product to market ahead of the competition, or for example act in a timely manner to address a new industry problem such as a legislative change. An even better example is when the Application or Service fails and the Business takes a hit by bad publicity, being trending topics on social media and losing direct revenue from online channels. For this reason alone Business and IT need the alignment of their priorities and deliverables now more than ever! Take a look at Forrester’s recent study that found ‘many IT respondents considering themselves to be trusted partners of the business but their efforts are impaired by the inadequacy of tools and organizations’.  IT Meet the Business; Business Meet IT So what is going on? We talk about aligning the business with IT but the reality is it’s difficult to do. Like any relationship each side has different goals and needs and language can be a barrier; business vs. technology jargon! What if we could translate the needs of both sides into actionable information, backed by data both sides understand, presented in a meaningful way?  Well now we can with the Business-Driven Application Management capabilities in Oracle Enterprise Manager 12cR2! Enterprise Manager’s Business-Driven Application Management capabilities provide the information that IT needs to understand the impact of its decisions on business criteria.  No longer does IT need to be focused solely on speeds and feeds, performance and throughput – now IT can understand IT’s impact on business KPIs like inventory turns, order-to-cash cycle, pipeline-to-forecast, and similar.  Similarly, now the line of business can understand which IT services are most critical for the KPIs they care about. There are a good deal of resources on Oracle Technology Network that describe the functionality of these products, so I won’t’ rehash them here.  What I want to talk about is what you do with these products. What’s next after we meet? Where do you start? Step 1:  Identify the Signature Experience. This is THE business process (or set of processes) that is core to the business, the one that drives the economic engine, the process that a customer recognises the company brand for, reputation, the customer experience, the process that a CEO would state as his number one priority. The crème de la crème of your business! Once you have nailed this it gets easy as Enterprise Manager 12c makes it easy. Step 2:  Map the Signature Experience to underlying IT.  Taking the signature experience, map out the touch points of the components that play a part in ensuring this business transaction is successful end to end, think of it like mapping out a critical path; the applications, middleware, databases and hardware. Use the wealth of Enterprise Manager features such as Systems, Services, Business Application Targets and Business Transaction Management (BTM) to assist you. Adding Real User Experience Insight (RUEI) into the mix will make the end to end customer satisfaction story transparent. Work with the business and define meaningful key performance indicators (KPI’s) and thresholds to enable you to report and action upon. Step 3:  Observe the data over time.  You now have meaningful insight into every step enabling your signature experience and you understand the implication of that experience on your underlying IT.  Watch if for a few months, see what happens and reconvene with your business stakeholders and set clear and measurable targets which can re-define service levels.  Step 4:  Change the information about which you and the business communicate.  It’s amazing what happens when you and the business speak the same language.  You’ll be able to make more informed business and IT decisions. From here IT can identify where/how budget is spent whether on the level of support, performance, capacity, HA, DR, certification etc. IT SLA’s no longer need be focused on metrics such as %availability but structured around business process requirements. The power of this way of thinking doesn’t end here. IT staff get to see and understand how their own role contributes to the business making them accountable for the business service. Take a step further and appraise your staff on the business competencies that are linked to the service availability. For the business, the language barrier is removed by producing targeted reports on the signature experience core to the business and therefore key to the CEO. Chargeback or show back becomes easier to justify as the ‘cost of day per outage’ can be more easily calculated; the business will be able to translate the cost to the business to the cost/value of the underlying IT that supports it. Used this way, Oracle Enterprise Manager 12c is a key enabler to a harmonious relationship between the end customer the business and IT to deliver ultimate service and satisfaction. Just engage with the business upfront, make the signature experience visible and let Enterprise Manager 12c do the rest. In the next blog entry we will cover some of the Enterprise Manager features mentioned to enable you to implement this new way of working.  

    Read the article

  • The Incremental Architect&rsquo;s Napkin - #5 - Design functions for extensibility and readability

    - by Ralf Westphal
    Originally posted on: http://geekswithblogs.net/theArchitectsNapkin/archive/2014/08/24/the-incremental-architectrsquos-napkin---5---design-functions-for.aspx The functionality of programs is entered via Entry Points. So what we´re talking about when designing software is a bunch of functions handling the requests represented by and flowing in through those Entry Points. Designing software thus consists of at least three phases: Analyzing the requirements to find the Entry Points and their signatures Designing the functionality to be executed when those Entry Points get triggered Implementing the functionality according to the design aka coding I presume, you´re familiar with phase 1 in some way. And I guess you´re proficient in implementing functionality in some programming language. But in my experience developers in general are not experienced in going through an explicit phase 2. “Designing functionality? What´s that supposed to mean?” you might already have thought. Here´s my definition: To design functionality (or functional design for short) means thinking about… well, functions. You find a solution for what´s supposed to happen when an Entry Point gets triggered in terms of functions. A conceptual solution that is, because those functions only exist in your head (or on paper) during this phase. But you may have guess that, because it´s “design” not “coding”. And here is, what functional design is not: It´s not about logic. Logic is expressions (e.g. +, -, && etc.) and control statements (e.g. if, switch, for, while etc.). Also I consider calling external APIs as logic. It´s equally basic. It´s what code needs to do in order to deliver some functionality or quality. Logic is what´s doing that needs to be done by software. Transformations are either done through expressions or API-calls. And then there is alternative control flow depending on the result of some expression. Basically it´s just jumps in Assembler, sometimes to go forward (if, switch), sometimes to go backward (for, while, do). But calling your own function is not logic. It´s not necessary to produce any outcome. Functionality is not enhanced by adding functions (subroutine calls) to your code. Nor is quality increased by adding functions. No performance gain, no higher scalability etc. through functions. Functions are not relevant to functionality. Strange, isn´t it. What they are important for is security of investment. By introducing functions into our code we can become more productive (re-use) and can increase evolvability (higher unterstandability, easier to keep code consistent). That´s no small feat, however. Evolvable code can hardly be overestimated. That´s why to me functional design is so important. It´s at the core of software development. To sum this up: Functional design is on a level of abstraction above (!) logical design or algorithmic design. Functional design is only done until you get to a point where each function is so simple you are very confident you can easily code it. Functional design an logical design (which mostly is coding, but can also be done using pseudo code or flow charts) are complementary. Software needs both. If you start coding right away you end up in a tangled mess very quickly. Then you need back out through refactoring. Functional design on the other hand is bloodless without actual code. It´s just a theory with no experiments to prove it. But how to do functional design? An example of functional design Let´s assume a program to de-duplicate strings. The user enters a number of strings separated by commas, e.g. a, b, a, c, d, b, e, c, a. And the program is supposed to clear this list of all doubles, e.g. a, b, c, d, e. There is only one Entry Point to this program: the user triggers the de-duplication by starting the program with the string list on the command line C:\>deduplicate "a, b, a, c, d, b, e, c, a" a, b, c, d, e …or by clicking on a GUI button. This leads to the Entry Point function to get called. It´s the program´s main function in case of the batch version or a button click event handler in the GUI version. That´s the physical Entry Point so to speak. It´s inevitable. What then happens is a three step process: Transform the input data from the user into a request. Call the request handler. Transform the output of the request handler into a tangible result for the user. Or to phrase it a bit more generally: Accept input. Transform input into output. Present output. This does not mean any of these steps requires a lot of effort. Maybe it´s just one line of code to accomplish it. Nevertheless it´s a distinct step in doing the processing behind an Entry Point. Call it an aspect or a responsibility - and you will realize it most likely deserves a function of its own to satisfy the Single Responsibility Principle (SRP). Interestingly the above list of steps is already functional design. There is no logic, but nevertheless the solution is described - albeit on a higher level of abstraction than you might have done yourself. But it´s still on a meta-level. The application to the domain at hand is easy, though: Accept string list from command line De-duplicate Present de-duplicated strings on standard output And this concrete list of processing steps can easily be transformed into code:static void Main(string[] args) { var input = Accept_string_list(args); var output = Deduplicate(input); Present_deduplicated_string_list(output); } Instead of a big problem there are three much smaller problems now. If you think each of those is trivial to implement, then go for it. You can stop the functional design at this point. But maybe, just maybe, you´re not so sure how to go about with the de-duplication for example. Then just implement what´s easy right now, e.g.private static string Accept_string_list(string[] args) { return args[0]; } private static void Present_deduplicated_string_list( string[] output) { var line = string.Join(", ", output); Console.WriteLine(line); } Accept_string_list() contains logic in the form of an API-call. Present_deduplicated_string_list() contains logic in the form of an expression and an API-call. And then repeat the functional design for the remaining processing step. What´s left is the domain logic: de-duplicating a list of strings. How should that be done? Without any logic at our disposal during functional design you´re left with just functions. So which functions could make up the de-duplication? Here´s a suggestion: De-duplicate Parse the input string into a true list of strings. Register each string in a dictionary/map/set. That way duplicates get cast away. Transform the data structure into a list of unique strings. Processing step 2 obviously was the core of the solution. That´s where real creativity was needed. That´s the core of the domain. But now after this refinement the implementation of each step is easy again:private static string[] Parse_string_list(string input) { return input.Split(',') .Select(s => s.Trim()) .ToArray(); } private static Dictionary<string,object> Compile_unique_strings(string[] strings) { return strings.Aggregate( new Dictionary<string, object>(), (agg, s) => { agg[s] = null; return agg; }); } private static string[] Serialize_unique_strings( Dictionary<string,object> dict) { return dict.Keys.ToArray(); } With these three additional functions Main() now looks like this:static void Main(string[] args) { var input = Accept_string_list(args); var strings = Parse_string_list(input); var dict = Compile_unique_strings(strings); var output = Serialize_unique_strings(dict); Present_deduplicated_string_list(output); } I think that´s very understandable code: just read it from top to bottom and you know how the solution to the problem works. It´s a mirror image of the initial design: Accept string list from command line Parse the input string into a true list of strings. Register each string in a dictionary/map/set. That way duplicates get cast away. Transform the data structure into a list of unique strings. Present de-duplicated strings on standard output You can even re-generate the design by just looking at the code. Code and functional design thus are always in sync - if you follow some simple rules. But about that later. And as a bonus: all the functions making up the process are small - which means easy to understand, too. So much for an initial concrete example. Now it´s time for some theory. Because there is method to this madness ;-) The above has only scratched the surface. Introducing Flow Design Functional design starts with a given function, the Entry Point. Its goal is to describe the behavior of the program when the Entry Point is triggered using a process, not an algorithm. An algorithm consists of logic, a process on the other hand consists just of steps or stages. Each processing step transforms input into output or a side effect. Also it might access resources, e.g. a printer, a database, or just memory. Processing steps thus can rely on state of some sort. This is different from Functional Programming, where functions are supposed to not be stateful and not cause side effects.[1] In its simplest form a process can be written as a bullet point list of steps, e.g. Get data from user Output result to user Transform data Parse data Map result for output Such a compilation of steps - possibly on different levels of abstraction - often is the first artifact of functional design. It can be generated by a team in an initial design brainstorming. Next comes ordering the steps. What should happen first, what next etc.? Get data from user Parse data Transform data Map result for output Output result to user That´s great for a start into functional design. It´s better than starting to code right away on a given function using TDD. Please get me right: TDD is a valuable practice. But it can be unnecessarily hard if the scope of a functionn is too large. But how do you know beforehand without investing some thinking? And how to do this thinking in a systematic fashion? My recommendation: For any given function you´re supposed to implement first do a functional design. Then, once you´re confident you know the processing steps - which are pretty small - refine and code them using TDD. You´ll see that´s much, much easier - and leads to cleaner code right away. For more information on this approach I call “Informed TDD” read my book of the same title. Thinking before coding is smart. And writing down the solution as a bunch of functions possibly is the simplest thing you can do, I´d say. It´s more according to the KISS (Keep It Simple, Stupid) principle than returning constants or other trivial stuff TDD development often is started with. So far so good. A simple ordered list of processing steps will do to start with functional design. As shown in the above example such steps can easily be translated into functions. Moving from design to coding thus is simple. However, such a list does not scale. Processing is not always that simple to be captured in a list. And then the list is just text. Again. Like code. That means the design is lacking visuality. Textual representations need more parsing by your brain than visual representations. Plus they are limited in their “dimensionality”: text just has one dimension, it´s sequential. Alternatives and parallelism are hard to encode in text. In addition the functional design using numbered lists lacks data. It´s not visible what´s the input, output, and state of the processing steps. That´s why functional design should be done using a lightweight visual notation. No tool is necessary to draw such designs. Use pen and paper; a flipchart, a whiteboard, or even a napkin is sufficient. Visualizing processes The building block of the functional design notation is a functional unit. I mostly draw it like this: Something is done, it´s clear what goes in, it´s clear what comes out, and it´s clear what the processing step requires in terms of state or hardware. Whenever input flows into a functional unit it gets processed and output is produced and/or a side effect occurs. Flowing data is the driver of something happening. That´s why I call this approach to functional design Flow Design. It´s about data flow instead of control flow. Control flow like in algorithms is of no concern to functional design. Thinking about control flow simply is too low level. Once you start with control flow you easily get bogged down by tons of details. That´s what you want to avoid during design. Design is supposed to be quick, broad brush, abstract. It should give overview. But what about all the details? As Robert C. Martin rightly said: “Programming is abot detail”. Detail is a matter of code. Once you start coding the processing steps you designed you can worry about all the detail you want. Functional design does not eliminate all the nitty gritty. It just postpones tackling them. To me that´s also an example of the SRP. Function design has the responsibility to come up with a solution to a problem posed by a single function (Entry Point). And later coding has the responsibility to implement the solution down to the last detail (i.e. statement, API-call). TDD unfortunately mixes both responsibilities. It´s just coding - and thereby trying to find detailed implementations (green phase) plus getting the design right (refactoring). To me that´s one reason why TDD has failed to deliver on its promise for many developers. Using functional units as building blocks of functional design processes can be depicted very easily. Here´s the initial process for the example problem: For each processing step draw a functional unit and label it. Choose a verb or an “action phrase” as a label, not a noun. Functional design is about activities, not state or structure. Then make the output of an upstream step the input of a downstream step. Finally think about the data that should flow between the functional units. Write the data above the arrows connecting the functional units in the direction of the data flow. Enclose the data description in brackets. That way you can clearly see if all flows have already been specified. Empty brackets mean “no data is flowing”, but nevertheless a signal is sent. A name like “list” or “strings” in brackets describes the data content. Use lower case labels for that purpose. A name starting with an upper case letter like “String” or “Customer” on the other hand signifies a data type. If you like, you also can combine descriptions with data types by separating them with a colon, e.g. (list:string) or (strings:string[]). But these are just suggestions from my practice with Flow Design. You can do it differently, if you like. Just be sure to be consistent. Flows wired-up in this manner I call one-dimensional (1D). Each functional unit just has one input and/or one output. A functional unit without an output is possible. It´s like a black hole sucking up input without producing any output. Instead it produces side effects. A functional unit without an input, though, does make much sense. When should it start to work? What´s the trigger? That´s why in the above process even the first processing step has an input. If you like, view such 1D-flows as pipelines. Data is flowing through them from left to right. But as you can see, it´s not always the same data. It get´s transformed along its passage: (args) becomes a (list) which is turned into (strings). The Principle of Mutual Oblivion A very characteristic trait of flows put together from function units is: no functional units knows another one. They are all completely independent of each other. Functional units don´t know where their input is coming from (or even when it´s gonna arrive). They just specify a range of values they can process. And they promise a certain behavior upon input arriving. Also they don´t know where their output is going. They just produce it in their own time independent of other functional units. That means at least conceptually all functional units work in parallel. Functional units don´t know their “deployment context”. They now nothing about the overall flow they are place in. They are just consuming input from some upstream, and producing output for some downstream. That makes functional units very easy to test. At least as long as they don´t depend on state or resources. I call this the Principle of Mutual Oblivion (PoMO). Functional units are oblivious of others as well as an overall context/purpose. They are just parts of a whole focused on a single responsibility. How the whole is built, how a larger goal is achieved, is of no concern to the single functional units. By building software in such a manner, functional design interestingly follows nature. Nature´s building blocks for organisms also follow the PoMO. The cells forming your body do not know each other. Take a nerve cell “controlling” a muscle cell for example:[2] The nerve cell does not know anything about muscle cells, let alone the specific muscel cell it is “attached to”. Likewise the muscle cell does not know anything about nerve cells, let a lone a specific nerve cell “attached to” it. Saying “the nerve cell is controlling the muscle cell” thus only makes sense when viewing both from the outside. “Control” is a concept of the whole, not of its parts. Control is created by wiring-up parts in a certain way. Both cells are mutually oblivious. Both just follow a contract. One produces Acetylcholine (ACh) as output, the other consumes ACh as input. Where the ACh is going, where it´s coming from neither cell cares about. Million years of evolution have led to this kind of division of labor. And million years of evolution have produced organism designs (DNA) which lead to the production of these different cell types (and many others) and also to their co-location. The result: the overall behavior of an organism. How and why this happened in nature is a mystery. For our software, though, it´s clear: functional and quality requirements needs to be fulfilled. So we as developers have to become “intelligent designers” of “software cells” which we put together to form a “software organism” which responds in satisfying ways to triggers from it´s environment. My bet is: If nature gets complex organisms working by following the PoMO, who are we to not apply this recipe for success to our much simpler “machines”? So my rule is: Wherever there is functionality to be delivered, because there is a clear Entry Point into software, design the functionality like nature would do it. Build it from mutually oblivious functional units. That´s what Flow Design is about. In that way it´s even universal, I´d say. Its notation can also be applied to biology: Never mind labeling the functional units with nouns. That´s ok in Flow Design. You´ll do that occassionally for functional units on a higher level of abstraction or when their purpose is close to hardware. Getting a cockroach to roam your bedroom takes 1,000,000 nerve cells (neurons). Getting the de-duplication program to do its job just takes 5 “software cells” (functional units). Both, though, follow the same basic principle. Translating functional units into code Moving from functional design to code is no rocket science. In fact it´s straightforward. There are two simple rules: Translate an input port to a function. Translate an output port either to a return statement in that function or to a function pointer visible to that function. The simplest translation of a functional unit is a function. That´s what you saw in the above example. Functions are mutually oblivious. That why Functional Programming likes them so much. It makes them composable. Which is the reason, nature works according to the PoMO. Let´s be clear about one thing: There is no dependency injection in nature. For all of an organism´s complexity no DI container is used. Behavior is the result of smooth cooperation between mutually oblivious building blocks. Functions will often be the adequate translation for the functional units in your designs. But not always. Take for example the case, where a processing step should not always produce an output. Maybe the purpose is to filter input. Here the functional unit consumes words and produces words. But it does not pass along every word flowing in. Some words are swallowed. Think of a spell checker. It probably should not check acronyms for correctness. There are too many of them. Or words with no more than two letters. Such words are called “stop words”. In the above picture the optionality of the output is signified by the astrisk outside the brackets. It means: Any number of (word) data items can flow from the functional unit for each input data item. It might be none or one or even more. This I call a stream of data. Such behavior cannot be translated into a function where output is generated with return. Because a function always needs to return a value. So the output port is translated into a function pointer or continuation which gets passed to the subroutine when called:[3]void filter_stop_words( string word, Action<string> onNoStopWord) { if (...check if not a stop word...) onNoStopWord(word); } If you want to be nitpicky you might call such a function pointer parameter an injection. And technically you´re right. Conceptually, though, it´s not an injection. Because the subroutine is not functionally dependent on the continuation. Firstly continuations are procedures, i.e. subroutines without a return type. Remember: Flow Design is about unidirectional data flow. Secondly the name of the formal parameter is chosen in a way as to not assume anything about downstream processing steps. onNoStopWord describes a situation (or event) within the functional unit only. Translating output ports into function pointers helps keeping functional units mutually oblivious in cases where output is optional or produced asynchronically. Either pass the function pointer to the function upon call. Or make it global by putting it on the encompassing class. Then it´s called an event. In C# that´s even an explicit feature.class Filter { public void filter_stop_words( string word) { if (...check if not a stop word...) onNoStopWord(word); } public event Action<string> onNoStopWord; } When to use a continuation and when to use an event dependens on how a functional unit is used in flows and how it´s packed together with others into classes. You´ll see examples further down the Flow Design road. Another example of 1D functional design Let´s see Flow Design once more in action using the visual notation. How about the famous word wrap kata? Robert C. Martin has posted a much cited solution including an extensive reasoning behind his TDD approach. So maybe you want to compare it to Flow Design. The function signature given is:string WordWrap(string text, int maxLineLength) {...} That´s not an Entry Point since we don´t see an application with an environment and users. Nevertheless it´s a function which is supposed to provide a certain functionality. The text passed in has to be reformatted. The input is a single line of arbitrary length consisting of words separated by spaces. The output should consist of one or more lines of a maximum length specified. If a word is longer than a the maximum line length it can be split in multiple parts each fitting in a line. Flow Design Let´s start by brainstorming the process to accomplish the feat of reformatting the text. What´s needed? Words need to be assembled into lines Words need to be extracted from the input text The resulting lines need to be assembled into the output text Words too long to fit in a line need to be split Does sound about right? I guess so. And it shows a kind of priority. Long words are a special case. So maybe there is a hint for an incremental design here. First let´s tackle “average words” (words not longer than a line). Here´s the Flow Design for this increment: The the first three bullet points turned into functional units with explicit data added. As the signature requires a text is transformed into another text. See the input of the first functional unit and the output of the last functional unit. In between no text flows, but words and lines. That´s good to see because thereby the domain is clearly represented in the design. The requirements are talking about words and lines and here they are. But note the asterisk! It´s not outside the brackets but inside. That means it´s not a stream of words or lines, but lists or sequences. For each text a sequence of words is output. For each sequence of words a sequence of lines is produced. The asterisk is used to abstract from the concrete implementation. Like with streams. Whether the list of words gets implemented as an array or an IEnumerable is not important during design. It´s an implementation detail. Does any processing step require further refinement? I don´t think so. They all look pretty “atomic” to me. And if not… I can always backtrack and refine a process step using functional design later once I´ve gained more insight into a sub-problem. Implementation The implementation is straightforward as you can imagine. The processing steps can all be translated into functions. Each can be tested easily and separately. Each has a focused responsibility. And the process flow becomes just a sequence of function calls: Easy to understand. It clearly states how word wrapping works - on a high level of abstraction. And it´s easy to evolve as you´ll see. Flow Design - Increment 2 So far only texts consisting of “average words” are wrapped correctly. Words not fitting in a line will result in lines too long. Wrapping long words is a feature of the requested functionality. Whether it´s there or not makes a difference to the user. To quickly get feedback I decided to first implement a solution without this feature. But now it´s time to add it to deliver the full scope. Fortunately Flow Design automatically leads to code following the Open Closed Principle (OCP). It´s easy to extend it - instead of changing well tested code. How´s that possible? Flow Design allows for extension of functionality by inserting functional units into the flow. That way existing functional units need not be changed. The data flow arrow between functional units is a natural extension point. No need to resort to the Strategy Pattern. No need to think ahead where extions might need to be made in the future. I just “phase in” the remaining processing step: Since neither Extract words nor Reformat know of their environment neither needs to be touched due to the “detour”. The new processing step accepts the output of the existing upstream step and produces data compatible with the existing downstream step. Implementation - Increment 2 A trivial implementation checking the assumption if this works does not do anything to split long words. The input is just passed on: Note how clean WordWrap() stays. The solution is easy to understand. A developer looking at this code sometime in the future, when a new feature needs to be build in, quickly sees how long words are dealt with. Compare this to Robert C. Martin´s solution:[4] How does this solution handle long words? Long words are not even part of the domain language present in the code. At least I need considerable time to understand the approach. Admittedly the Flow Design solution with the full implementation of long word splitting is longer than Robert C. Martin´s. At least it seems. Because his solution does not cover all the “word wrap situations” the Flow Design solution handles. Some lines would need to be added to be on par, I guess. But even then… Is a difference in LOC that important as long as it´s in the same ball park? I value understandability and openness for extension higher than saving on the last line of code. Simplicity is not just less code, it´s also clarity in design. But don´t take my word for it. Try Flow Design on larger problems and compare for yourself. What´s the easier, more straightforward way to clean code? And keep in mind: You ain´t seen all yet ;-) There´s more to Flow Design than described in this chapter. In closing I hope I was able to give you a impression of functional design that makes you hungry for more. To me it´s an inevitable step in software development. Jumping from requirements to code does not scale. And it leads to dirty code all to quickly. Some thought should be invested first. Where there is a clear Entry Point visible, it´s functionality should be designed using data flows. Because with data flows abstraction is possible. For more background on why that´s necessary read my blog article here. For now let me point out to you - if you haven´t already noticed - that Flow Design is a general purpose declarative language. It´s “programming by intention” (Shalloway et al.). Just write down how you think the solution should work on a high level of abstraction. This breaks down a large problem in smaller problems. And by following the PoMO the solutions to those smaller problems are independent of each other. So they are easy to test. Or you could even think about getting them implemented in parallel by different team members. Flow Design not only increases evolvability, but also helps becoming more productive. All team members can participate in functional design. This goes beyon collective code ownership. We´re talking collective design/architecture ownership. Because with Flow Design there is a common visual language to talk about functional design - which is the foundation for all other design activities.   PS: If you like what you read, consider getting my ebook “The Incremental Architekt´s Napkin”. It´s where I compile all the articles in this series for easier reading. I like the strictness of Function Programming - but I also find it quite hard to live by. And it certainly is not what millions of programmers are used to. Also to me it seems, the real world is full of state and side effects. So why give them such a bad image? That´s why functional design takes a more pragmatic approach. State and side effects are ok for processing steps - but be sure to follow the SRP. Don´t put too much of it into a single processing step. ? Image taken from www.physioweb.org ? My code samples are written in C#. C# sports typed function pointers called delegates. Action is such a function pointer type matching functions with signature void someName(T t). Other languages provide similar ways to work with functions as first class citizens - even Java now in version 8. I trust you find a way to map this detail of my translation to your favorite programming language. I know it works for Java, C++, Ruby, JavaScript, Python, Go. And if you´re using a Functional Programming language it´s of course a no brainer. ? Taken from his blog post “The Craftsman 62, The Dark Path”. ?

    Read the article

  • Extending Oracle CEP with Predictive Analytics

    - by vikram.shukla(at)oracle.com
    Introduction: OCEP is often used as a business rules engine to execute a set of business logic rules via CQL statements, and take decisions based on the outcome of those rules. There are times where configuring rules manually is sufficient because an application needs to deal with only a small and well-defined set of static rules. However, in many situations customers don't want to pre-define such rules for two reasons. First, they are dealing with events with lots of columns and manually crafting such rules for each column or a set of columns and combinations thereof is almost impossible. Second, they are content with probabilistic outcomes and do not care about 100% precision. The former is the case when a user is dealing with data with high dimensionality, the latter when an application can live with "false" positives as they can be discarded after further inspection, say by a Human Task component in a Business Process Management software. The primary goal of this blog post is to show how this can be achieved by combining OCEP with Oracle Data Mining® and leveraging the latter's rich set of algorithms and functionality to do predictive analytics in real time on streaming events. The secondary goal of this post is also to show how OCEP can be extended to invoke any arbitrary external computation in an RDBMS from within CEP. The extensible facility is known as the JDBC cartridge. The rest of the post describes the steps required to achieve this: We use the dataset available at http://blogs.oracle.com/datamining/2010/01/fraud_and_anomaly_detection_made_simple.html to showcase the capabilities. We use it to show how transaction anomalies or fraud can be detected. Building the model: Follow the self-explanatory steps described at the above URL to build the model.  It is very simple - it uses built-in Oracle Data Mining PL/SQL packages to cleanse, normalize and build the model out of the dataset.  You can also use graphical Oracle Data Miner®  to build the models. To summarize, it involves: Specifying which algorithms to use. In this case we use Support Vector Machines as we're trying to find anomalies in highly dimensional dataset.Build model on the data in the table for the algorithms specified. For this example, the table was populated in the scott/tiger schema with appropriate privileges. Configuring the Data Source: This is the first step in building CEP application using such an integration.  Our datasource looks as follows in the server config file.  It is advisable that you use the Visualizer to add it to the running server dynamically, rather than manually edit the file.    <data-source>         <name>DataMining</name>         <data-source-params>             <jndi-names>                 <element>DataMining</element>             </jndi-names>             <global-transactions-protocol>OnePhaseCommit</global-transactions-protocol>         </data-source-params>         <connection-pool-params>             <credential-mapping-enabled></credential-mapping-enabled>             <test-table-name>SQL SELECT 1 from DUAL</test-table-name>             <initial-capacity>1</initial-capacity>             <max-capacity>15</max-capacity>             <capacity-increment>1</capacity-increment>         </connection-pool-params>         <driver-params>             <use-xa-data-source-interface>true</use-xa-data-source-interface>             <driver-name>oracle.jdbc.OracleDriver</driver-name>             <url>jdbc:oracle:thin:@localhost:1522:orcl</url>             <properties>                 <element>                     <value>scott</value>                     <name>user</name>                 </element>                 <element>                     <value>{Salted-3DES}AzFE5dDbO2g=</value>                     <name>password</name>                 </element>                                 <element>                     <name>com.bea.core.datasource.serviceName</name>                     <value>oracle11.2g</value>                 </element>                 <element>                     <name>com.bea.core.datasource.serviceVersion</name>                     <value>11.2.0</value>                 </element>                 <element>                     <name>com.bea.core.datasource.serviceObjectClass</name>                     <value>java.sql.Driver</value>                 </element>             </properties>         </driver-params>     </data-source>   Designing the EPN: The EPN is very simple in this example. We briefly describe each of the components. The adapter ("DataMiningAdapter") reads data from a .csv file and sends it to the CQL processor downstream. The event payload here is same as that of the table in the database (refer to the attached project or do a "desc table-name" from a SQL*PLUS prompt). While this is for convenience in this example, it need not be the case. One can still omit fields in the streaming events, and need not match all columns in the table on which the model was built. Better yet, it does not even need to have the same name as columns in the table, as long as you alias them in the USING clause of the mining function. (Caveat: they still need to draw values from a similar universe or domain, otherwise it constitutes incorrect usage of the model). There are two things in the CQL processor ("DataMiningProc") that make scoring possible on streaming events. 1.      User defined cartridge function Please refer to the OCEP CQL reference manual to find more details about how to define such functions. We include the function below in its entirety for illustration. <?xml version="1.0" encoding="UTF-8"?> <jdbcctxconfig:config     xmlns:jdbcctxconfig="http://www.bea.com/ns/wlevs/config/application"     xmlns:jc="http://www.oracle.com/ns/ocep/config/jdbc">        <jc:jdbc-ctx>         <name>Oracle11gR2</name>         <data-source>DataMining</data-source>               <function name="prediction2">                                 <param name="CQLMONTH" type="char"/>                      <param name="WEEKOFMONTH" type="int"/>                      <param name="DAYOFWEEK" type="char" />                      <param name="MAKE" type="char" />                      <param name="ACCIDENTAREA"   type="char" />                      <param name="DAYOFWEEKCLAIMED"  type="char" />                      <param name="MONTHCLAIMED" type="char" />                      <param name="WEEKOFMONTHCLAIMED" type="int" />                      <param name="SEX" type="char" />                      <param name="MARITALSTATUS"   type="char" />                      <param name="AGE" type="int" />                      <param name="FAULT" type="char" />                      <param name="POLICYTYPE"   type="char" />                      <param name="VEHICLECATEGORY"  type="char" />                      <param name="VEHICLEPRICE" type="char" />                      <param name="FRAUDFOUND" type="int" />                      <param name="POLICYNUMBER" type="int" />                      <param name="REPNUMBER" type="int" />                      <param name="DEDUCTIBLE"   type="int" />                      <param name="DRIVERRATING"  type="int" />                      <param name="DAYSPOLICYACCIDENT"   type="char" />                      <param name="DAYSPOLICYCLAIM" type="char" />                      <param name="PASTNUMOFCLAIMS" type="char" />                      <param name="AGEOFVEHICLES" type="char" />                      <param name="AGEOFPOLICYHOLDER" type="char" />                      <param name="POLICEREPORTFILED" type="char" />                      <param name="WITNESSPRESNT" type="char" />                      <param name="AGENTTYPE" type="char" />                      <param name="NUMOFSUPP" type="char" />                      <param name="ADDRCHGCLAIM"   type="char" />                      <param name="NUMOFCARS" type="char" />                      <param name="CQLYEAR" type="int" />                      <param name="BASEPOLICY" type="char" />                                     <return-component-type>char</return-component-type>                                                      <sql><![CDATA[             SELECT to_char(PREDICTION_PROBABILITY(CLAIMSMODEL, '0' USING *))               AS probability             FROM (SELECT  :CQLMONTH AS MONTH,                                            :WEEKOFMONTH AS WEEKOFMONTH,                          :DAYOFWEEK AS DAYOFWEEK,                           :MAKE AS MAKE,                           :ACCIDENTAREA AS ACCIDENTAREA,                           :DAYOFWEEKCLAIMED AS DAYOFWEEKCLAIMED,                           :MONTHCLAIMED AS MONTHCLAIMED,                           :WEEKOFMONTHCLAIMED,                             :SEX AS SEX,                           :MARITALSTATUS AS MARITALSTATUS,                            :AGE AS AGE,                           :FAULT AS FAULT,                           :POLICYTYPE AS POLICYTYPE,                            :VEHICLECATEGORY AS VEHICLECATEGORY,                           :VEHICLEPRICE AS VEHICLEPRICE,                           :FRAUDFOUND AS FRAUDFOUND,                           :POLICYNUMBER AS POLICYNUMBER,                           :REPNUMBER AS REPNUMBER,                           :DEDUCTIBLE AS DEDUCTIBLE,                            :DRIVERRATING AS DRIVERRATING,                           :DAYSPOLICYACCIDENT AS DAYSPOLICYACCIDENT,                            :DAYSPOLICYCLAIM AS DAYSPOLICYCLAIM,                           :PASTNUMOFCLAIMS AS PASTNUMOFCLAIMS,                           :AGEOFVEHICLES AS AGEOFVEHICLES,                           :AGEOFPOLICYHOLDER AS AGEOFPOLICYHOLDER,                           :POLICEREPORTFILED AS POLICEREPORTFILED,                           :WITNESSPRESNT AS WITNESSPRESENT,                           :AGENTTYPE AS AGENTTYPE,                           :NUMOFSUPP AS NUMOFSUPP,                           :ADDRCHGCLAIM AS ADDRCHGCLAIM,                            :NUMOFCARS AS NUMOFCARS,                           :CQLYEAR AS YEAR,                           :BASEPOLICY AS BASEPOLICY                 FROM dual)                 ]]>         </sql>        </function>     </jc:jdbc-ctx> </jdbcctxconfig:config> 2.      Invoking the function for each event. Once this function is defined, you can invoke it from CQL as follows: <?xml version="1.0" encoding="UTF-8"?> <wlevs:config xmlns:wlevs="http://www.bea.com/ns/wlevs/config/application">   <processor>     <name>DataMiningProc</name>     <rules>        <query id="q1"><![CDATA[                     ISTREAM(SELECT S.CQLMONTH,                                   S.WEEKOFMONTH,                                   S.DAYOFWEEK, S.MAKE,                                   :                                         S.BASEPOLICY,                                    C.F AS probability                                                 FROM                                 StreamDataChannel [NOW] AS S,                                 TABLE(prediction2@Oracle11gR2(S.CQLMONTH,                                      S.WEEKOFMONTH,                                      S.DAYOFWEEK,                                       S.MAKE, ...,                                      S.BASEPOLICY) AS F of char) AS C)                       ]]></query>                 </rules>               </processor>           </wlevs:config>   Finally, the last stage in the EPN prints out the probability of the event being an anomaly. One can also define a threshold in CQL to filter out events that are normal, i.e., below a certain mark as defined by the analyst or designer. Sample Runs: Now let's see how this behaves when events are streamed through CEP. We use only two events for brevity, one normal and other one not. This is one of the "normal" looking events and the probability of it being anomalous is less than 60%. Event is: eventType=DataMiningOutEvent object=q1  time=2904821976256 S.CQLMONTH=Dec, S.WEEKOFMONTH=5, S.DAYOFWEEK=Wednesday, S.MAKE=Honda, S.ACCIDENTAREA=Urban, S.DAYOFWEEKCLAIMED=Tuesday, S.MONTHCLAIMED=Jan, S.WEEKOFMONTHCLAIMED=1, S.SEX=Female, S.MARITALSTATUS=Single, S.AGE=21, S.FAULT=Policy Holder, S.POLICYTYPE=Sport - Liability, S.VEHICLECATEGORY=Sport, S.VEHICLEPRICE=more than 69000, S.FRAUDFOUND=0, S.POLICYNUMBER=1, S.REPNUMBER=12, S.DEDUCTIBLE=300, S.DRIVERRATING=1, S.DAYSPOLICYACCIDENT=more than 30, S.DAYSPOLICYCLAIM=more than 30, S.PASTNUMOFCLAIMS=none, S.AGEOFVEHICLES=3 years, S.AGEOFPOLICYHOLDER=26 to 30, S.POLICEREPORTFILED=No, S.WITNESSPRESENT=No, S.AGENTTYPE=External, S.NUMOFSUPP=none, S.ADDRCHGCLAIM=1 year, S.NUMOFCARS=3 to 4, S.CQLYEAR=1994, S.BASEPOLICY=Liability, probability=.58931702982118561 isTotalOrderGuarantee=true\nAnamoly probability: .58931702982118561 However, the following event is scored as an anomaly with a very high probability of  89%. So there is likely to be something wrong with it. A close look reveals that the value of "deductible" field (10000) is not "normal". What exactly constitutes normal here?. If you run the query on the database to find ALL distinct values for the "deductible" field, it returns the following set: {300, 400, 500, 700} Event is: eventType=DataMiningOutEvent object=q1  time=2598483773496 S.CQLMONTH=Dec, S.WEEKOFMONTH=5, S.DAYOFWEEK=Wednesday, S.MAKE=Honda, S.ACCIDENTAREA=Urban, S.DAYOFWEEKCLAIMED=Tuesday, S.MONTHCLAIMED=Jan, S.WEEKOFMONTHCLAIMED=1, S.SEX=Female, S.MARITALSTATUS=Single, S.AGE=21, S.FAULT=Policy Holder, S.POLICYTYPE=Sport - Liability, S.VEHICLECATEGORY=Sport, S.VEHICLEPRICE=more than 69000, S.FRAUDFOUND=0, S.POLICYNUMBER=1, S.REPNUMBER=12, S.DEDUCTIBLE=10000, S.DRIVERRATING=1, S.DAYSPOLICYACCIDENT=more than 30, S.DAYSPOLICYCLAIM=more than 30, S.PASTNUMOFCLAIMS=none, S.AGEOFVEHICLES=3 years, S.AGEOFPOLICYHOLDER=26 to 30, S.POLICEREPORTFILED=No, S.WITNESSPRESENT=No, S.AGENTTYPE=External, S.NUMOFSUPP=none, S.ADDRCHGCLAIM=1 year, S.NUMOFCARS=3 to 4, S.CQLYEAR=1994, S.BASEPOLICY=Liability, probability=.89171554529576691 isTotalOrderGuarantee=true\nAnamoly probability: .89171554529576691 Conclusion: By way of this example, we show: real-time scoring of events as they flow through CEP leveraging Oracle Data Mining.how CEP applications can invoke complex arbitrary external computations (function shipping) in an RDBMS.

    Read the article

  • Reading Data from DDFS ValueError: No JSON object could be decoded

    - by secumind
    I'm running dozens of map reduce jobs for a number of different purposes using disco. My data has grown enormous and I thought I would try using DDFS for a change rather than standard txt files. I've followed the DISCO map/reduce example Counting Words as a map/reduce job, without to much difficulty and with the help of others, Reading JSON specific data into DISCO I've gotten past one of my latest problems. I'm trying to read data in/out of ddfs to better chunk and distribute it but am having a bit of trouble. Here's an example file: file.txt {"favorited": false, "in_reply_to_user_id": null, "contributors": null, "truncated": false, "text": "I'll call him back tomorrow I guess", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": null, "coordinates": null, "in_reply_to_user_id_str": null, "entities": {"user_mentions": [], "hashtags": [], "urls": []}, "in_reply_to_status_id": null, "id_str": "168931016843603968", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/305726905/FASHION-3.png", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1818996723/image_normal.jpg", "profile_sidebar_fill_color": "292727", "is_translator": false, "id": 113532729, "profile_text_color": "000000", "followers_count": 78, "protected": false, "location": "With My Niggas In Paris!", "default_profile_image": false, "listed_count": 0, "utc_offset": -21600, "statuses_count": 6733, "description": "Made in CHINA., Educated && Making My Own $$. Fear GOD && Put Him 1st. #TeamFollowBack #TeamiPhone\n", "friends_count": 74, "profile_link_color": "b03f3f", "profile_image_url": "http://a2.twimg.com/profile_images/1818996723/image_normal.jpg", "notifications": null, "show_all_inline_media": false, "geo_enabled": true, "profile_background_color": "1f9199", "id_str": "113532729", "profile_background_image_url": "http://a3.twimg.com/profile_background_images/305726905/FASHION-3.png", "name": "Bee'Jay", "lang": "en", "profile_background_tile": true, "favourites_count": 19, "screen_name": "OohMyBEEsNice", "url": "http://www.bitchimpaid.org", "created_at": "Fri Feb 12 03:32:54 +0000 2010", "contributors_enabled": false, "time_zone": "Central Time (US & Canada)", "profile_sidebar_border_color": "000000", "default_profile": false, "following": null}, "in_reply_to_screen_name": null, "retweet_count": 0, "geo": null, "id": 168931016843603968, "source": "<a href=\"http://twitter.com/#!/download/iphone\" rel=\"nofollow\">Twitter for iPhone</a>"} {"favorited": false, "in_reply_to_user_id": 50940453, "contributors": null, "truncated": false, "text": "@LegaMrvica @MimozaBand makasi om artis :D kadoo kadoo", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": "168653037894770688", "coordinates": null, "in_reply_to_user_id_str": "50940453", "entities": {"user_mentions": [{"indices": [0, 11], "screen_name": "LegaMrvica", "id": 50940453, "name": "Lega_thePianis", "id_str": "50940453"}, {"indices": [12, 23], "screen_name": "MimozaBand", "id": 375128905, "name": "Mimoza", "id_str": "375128905"}], "hashtags": [], "urls": []}, "in_reply_to_status_id": 168653037894770688, "id_str": "168931016868761600", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/347686061/Galungan_dan_Kuningan.jpg", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1803845596/Picture_20124_normal.jpg", "profile_sidebar_fill_color": "DDFFCC", "is_translator": false, "id": 48293450, "profile_text_color": "333333", "followers_count": 182, "protected": false, "location": "\u00dcT: -6.906799,107.622383", "default_profile_image": false, "listed_count": 0, "utc_offset": -28800, "statuses_count": 3052, "description": "Fashion design maranatha '11 // traditional dancer (bali) at sanggar tampak siring & Natya Nataraja", "friends_count": 206, "profile_link_color": "0084B4", "profile_image_url": "http://a3.twimg.com/profile_images/1803845596/Picture_20124_normal.jpg", "notifications": null, "show_all_inline_media": false, "geo_enabled": true, "profile_background_color": "9AE4E8", "id_str": "48293450", "profile_background_image_url": "http://a0.twimg.com/profile_background_images/347686061/Galungan_dan_Kuningan.jpg", "name": "nana afiff", "lang": "en", "profile_background_tile": true, "favourites_count": 2, "screen_name": "hasnfebria", "url": null, "created_at": "Thu Jun 18 08:50:29 +0000 2009", "contributors_enabled": false, "time_zone": "Pacific Time (US & Canada)", "profile_sidebar_border_color": "BDDCAD", "default_profile": false, "following": null}, "in_reply_to_screen_name": "LegaMrvica", "retweet_count": 0, "geo": null, "id": 168931016868761600, "source": "<a href=\"http://blackberry.com/twitter\" rel=\"nofollow\">Twitter for BlackBerry\u00ae</a>"} {"favorited": false, "in_reply_to_user_id": 27260086, "contributors": null, "truncated": false, "text": "@justinbieber u were born to be somebody, and u're super important in beliebers' life. thanks for all biebs. I love u. follow me? 84", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": null, "coordinates": null, "in_reply_to_user_id_str": "27260086", "entities": {"user_mentions": [{"indices": [0, 13], "screen_name": "justinbieber", "id": 27260086, "name": "Justin Bieber", "id_str": "27260086"}], "hashtags": [], "urls": []}, "in_reply_to_status_id": null, "id_str": "168931016856178688", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/416005864/Captura.JPG", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1808883280/Captura6_normal.JPG", "profile_sidebar_fill_color": "f5e7f3", "is_translator": false, "id": 406750700, "profile_text_color": "333333", "followers_count": 1122, "protected": false, "location": "Adentro de una supra.", "default_profile_image": false, "listed_count": 0, "utc_offset": -14400, "statuses_count": 20966, "description": "Mi \u00eddolo es @justinbieber , si te gusta \u00a1genial!, si no, solo respetalo. El cambi\u00f3 mi vida completamente y mi sue\u00f1o es conocerlo #TrueBelieber . ", "friends_count": 1015, "profile_link_color": "9404b8", "profile_image_url": "http://a1.twimg.com/profile_images/1808883280/Captura6_normal.JPG", "notifications": null, "show_all_inline_media": false, "geo_enabled": false, "profile_background_color": "f9fcfa", "id_str": "406750700", "profile_background_image_url": "http://a3.twimg.com/profile_background_images/416005864/Captura.JPG", "name": "neversaynever,right?", "lang": "es", "profile_background_tile": false, "favourites_count": 22, "screen_name": "True_Belieebers", "url": "http://www.wehavebieber-fever.tumblr.com", "created_at": "Mon Nov 07 04:17:40 +0000 2011", "contributors_enabled": false, "time_zone": "Santiago", "profile_sidebar_border_color": "C0DEED", "default_profile": false, "following": null}, "in_reply_to_screen_name": "justinbieber", "retweet_count": 0, "geo": null, "id": 168931016856178688, "source": "<a href=\"http://yfrog.com\" rel=\"nofollow\">Yfrog</a>"} I load it into DDFS with: # ddfs chunk data:test1 ./file.txt created: disco://localhost/ddfs/vol0/blob/44/file_txt-0$549-db27b-125e1 I test that the file is indeed loaded into ddfs with: # ddfs xcat data:test1 {"favorited": false, "in_reply_to_user_id": null, "contributors": null, "truncated": false, "text": "I'll call him back tomorrow I guess", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": null, "coordinates": null, "in_reply_to_user_id_str": null, "entities": {"user_mentions": [], "hashtags": [], "urls": []}, "in_reply_to_status_id": null, "id_str": "168931016843603968", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/305726905/FASHION-3.png", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1818996723/image_normal.jpg", "profile_sidebar_fill_color": "292727", "is_translator": false, "id": 113532729, "profile_text_color": "000000", "followers_count": 78, "protected": false, "location": "With My Niggas In Paris!", "default_profile_image": false, "listed_count": 0, "utc_offset": -21600, "statuses_count": 6733, "description": "Made in CHINA., Educated && Making My Own $$. Fear GOD && Put Him 1st. #TeamFollowBack #TeamiPhone\n", "friends_count": 74, "profile_link_color": "b03f3f", "profile_image_url": "http://a2.twimg.com/profile_images/1818996723/image_normal.jpg", "notifications": null, "show_all_inline_media": false, "geo_enabled": true, "profile_background_color": "1f9199", "id_str": "113532729", "profile_background_image_url": "http://a3.twimg.com/profile_background_images/305726905/FASHION-3.png", "name": "Bee'Jay", "lang": "en", "profile_background_tile": true, "favourites_count": 19, "screen_name": "OohMyBEEsNice", "url": "http://www.bitchimpaid.org", "created_at": "Fri Feb 12 03:32:54 +0000 2010", "contributors_enabled": false, "time_zone": "Central Time (US & Canada)", "profile_sidebar_border_color": "000000", "default_profile": false, "following": null}, "in_reply_to_screen_name": null, "retweet_count": 0, "geo": null, "id": 168931016843603968, "source": "<a href=\"http://twitter.com/#!/download/iphone\" rel=\"nofollow\">Twitter for iPhone</a>"} {"favorited": false, "in_reply_to_user_id": 50940453, "contributors": null, "truncated": false, "text": "@LegaMrvica @MimozaBand makasi om artis :D kadoo kadoo", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": "168653037894770688", "coordinates": null, "in_reply_to_user_id_str": "50940453", "entities": {"user_mentions": [{"indices": [0, 11], "screen_name": "LegaMrvica", "id": 50940453, "name": "Lega_thePianis", "id_str": "50940453"}, {"indices": [12, 23], "screen_name": "MimozaBand", "id": 375128905, "name": "Mimoza", "id_str": "375128905"}], "hashtags": [], "urls": []}, "in_reply_to_status_id": 168653037894770688, "id_str": "168931016868761600", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/347686061/Galungan_dan_Kuningan.jpg", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1803845596/Picture_20124_normal.jpg", "profile_sidebar_fill_color": "DDFFCC", "is_translator": false, "id": 48293450, "profile_text_color": "333333", "followers_count": 182, "protected": false, "location": "\u00dcT: -6.906799,107.622383", "default_profile_image": false, "listed_count": 0, "utc_offset": -28800, "statuses_count": 3052, "description": "Fashion design maranatha '11 // traditional dancer (bali) at sanggar tampak siring & Natya Nataraja", "friends_count": 206, "profile_link_color": "0084B4", "profile_image_url": "http://a3.twimg.com/profile_images/1803845596/Picture_20124_normal.jpg", "notifications": null, "show_all_inline_media": false, "geo_enabled": true, "profile_background_color": "9AE4E8", "id_str": "48293450", "profile_background_image_url": "http://a0.twimg.com/profile_background_images/347686061/Galungan_dan_Kuningan.jpg", "name": "nana afiff", "lang": "en", "profile_background_tile": true, "favourites_count": 2, "screen_name": "hasnfebria", "url": null, "created_at": "Thu Jun 18 08:50:29 +0000 2009", "contributors_enabled": false, "time_zone": "Pacific Time (US & Canada)", "profile_sidebar_border_color": "BDDCAD", "default_profile": false, "following": null}, "in_reply_to_screen_name": "LegaMrvica", "retweet_count": 0, "geo": null, "id": 168931016868761600, "source": "<a href=\"http://blackberry.com/twitter\" rel=\"nofollow\">Twitter for BlackBerry\u00ae</a>"} {"favorited": false, "in_reply_to_user_id": 27260086, "contributors": null, "truncated": false, "text": "@justinbieber u were born to be somebody, and u're super important in beliebers' life. thanks for all biebs. I love u. follow me? 84", "created_at": "Mon Feb 13 05:34:27 +0000 2012", "retweeted": false, "in_reply_to_status_id_str": null, "coordinates": null, "in_reply_to_user_id_str": "27260086", "entities": {"user_mentions": [{"indices": [0, 13], "screen_name": "justinbieber", "id": 27260086, "name": "Justin Bieber", "id_str": "27260086"}], "hashtags": [], "urls": []}, "in_reply_to_status_id": null, "id_str": "168931016856178688", "place": null, "user": {"follow_request_sent": null, "profile_use_background_image": true, "profile_background_image_url_https": "https://si0.twimg.com/profile_background_images/416005864/Captura.JPG", "verified": false, "profile_image_url_https": "https://si0.twimg.com/profile_images/1808883280/Captura6_normal.JPG", "profile_sidebar_fill_color": "f5e7f3", "is_translator": false, "id": 406750700, "profile_text_color": "333333", "followers_count": 1122, "protected": false, "location": "Adentro de una supra.", "default_profile_image": false, "listed_count": 0, "utc_offset": -14400, "statuses_count": 20966, "description": "Mi \u00eddolo es @justinbieber , si te gusta \u00a1genial!, si no, solo respetalo. El cambi\u00f3 mi vida completamente y mi sue\u00f1o es conocerlo #TrueBelieber . ", "friends_count": 1015, "profile_link_color": "9404b8", "profile_image_url": "http://a1.twimg.com/profile_images/1808883280/Captura6_normal.JPG", "notifications": null, "show_all_inline_media": false, "geo_enabled": false, "profile_background_color": "f9fcfa", "id_str": "406750700", "profile_background_image_url": "http://a3.twimg.com/profile_background_images/416005864/Captura.JPG", "name": "neversaynever,right?", "lang": "es", "profile_background_tile": false, "favourites_count": 22, "screen_name": "True_Belieebers", "url": "http://www.wehavebieber-fever.tumblr.com", "created_at": "Mon Nov 07 04:17:40 +0000 2011", "contributors_enabled": false, "time_zone": "Santiago", "profile_sidebar_border_color": "C0DEED", "default_profile": false, "following": null}, "in_reply_to_screen_name": "justinbieber", "retweet_count": 0, "geo": null, "id": 168931016856178688, "source": "<a href=\"http://yfrog.com\" rel=\"nofollow\">Yfrog</a> At this point everything is great, I load up the script that resulted from a previous Stack Post: from disco.core import Job, result_iterator import gzip def map(line, params): import unicodedata import json r = json.loads(line).get('text') s = unicodedata.normalize('NFD', r).encode('ascii', 'ignore') for word in s.split(): yield word, 1 def reduce(iter, params): from disco.util import kvgroup for word, counts in kvgroup(sorted(iter)): yield word, sum(counts) if __name__ == '__main__': job = Job().run(input=["tag://data:test1"], map=map, reduce=reduce) for word, count in result_iterator(job.wait(show=True)): print word, count NOTE: That this script runs file if the input=["file.txt"], however when I run it with "tag://data:test1" I get the following error: # DISCO_EVENTS=1 python count_normal_words.py Job@549:db30e:25bd8: Status: [map] 0 waiting, 1 running, 0 done, 0 failed 2012/11/25 21:43:26 master New job initialized! 2012/11/25 21:43:26 master Starting job 2012/11/25 21:43:26 master Starting map phase 2012/11/25 21:43:26 master map:0 assigned to solice 2012/11/25 21:43:26 master ERROR: Job failed: Worker at 'solice' died: Traceback (most recent call last): File "/home/DISCO/data/solice/01/Job@549:db30e:25bd8/usr/local/lib/python2.7/site-packages/disco/worker/__init__.py", line 329, in main job.worker.start(task, job, **jobargs) File "/home/DISCO/data/solice/01/Job@549:db30e:25bd8/usr/local/lib/python2.7/site-packages/disco/worker/__init__.py", line 290, in start self.run(task, job, **jobargs) File "/home/DISCO/data/solice/01/Job@549:db30e:25bd8/usr/local/lib/python2.7/site-packages/disco/worker/classic/worker.py", line 286, in run getattr(self, task.mode)(task, params) File "/home/DISCO/data/solice/01/Job@549:db30e:25bd8/usr/local/lib/python2.7/site-packages/disco/worker/classic/worker.py", line 299, in map for key, val in self['map'](entry, params): File "count_normal_words.py", line 12, in map File "/usr/lib64/python2.7/json/__init__.py", line 326, in loads return _default_decoder.decode(s) File "/usr/lib64/python2.7/json/decoder.py", line 366, in decode obj, end = self.raw_decode(s, idx=_w(s, 0).end()) File "/usr/lib64/python2.7/json/decoder.py", line 384, in raw_decode raise ValueError("No JSON object could be decoded") ValueError: No JSON object could be decoded 2012/11/25 21:43:26 master WARN: Job killed Status: [map] 1 waiting, 0 running, 0 done, 1 failed Traceback (most recent call last): File "count_normal_words.py", line 28, in <module> for word, count in result_iterator(job.wait(show=True)): File "/usr/local/lib/python2.7/site-packages/disco/core.py", line 348, in wait timeout, poll_interval * 1000) File "/usr/local/lib/python2.7/site-packages/disco/core.py", line 309, in check_results raise JobError(Job(name=jobname, master=self), "Status %s" % status) disco.error.JobError: Job Job@549:db30e:25bd8 failed: Status dead The Error states: ValueError: No JSON object could be decoded. Again, this works fine using the text file as input but now DDFS. Any ideas, I'm open to suggestions?

    Read the article

  • HTTP Error 403.18 - Forbidden - asp.net mvc web api

    - by CoffeeCode
    I have deployed the default asp.net mvc 4 web api project to my windows server 2008 RC and am experiensing some issues with calling the web api actions. I'm quite new in the server/iis configuration part. I can open the home page, but the API part doesnt work. I'm getting such an error: HTTP Error 403.18 - Forbidden The specified request cannot be processed in the application pool that is configured for this resource on the Web server Module IIS Web Core Notification BeginRequest Handler StaticFile Error Code 0x00000000 Requested URL http://server.com:80/index.php?p=MvcApplication2_deploy/api/values/ Physical Path C:\Inetpub\vhosts\server.com\Webservice\index.php Logon Method Not yet determined Logon User Not yet determined I have checked Url Rewrite it is empty, have disabled WebDAV and also checked the Handler Mappings every thing seems to be ok there. Could any one give me some hints what could be wrong? Thanks!!!

    Read the article

  • Windows update error code : 80244004

    - by Hamidreza
    I am using Windows 7 and ESET SMART SECURITY 5 . Today I wanted to update my computer using Windows Update but it does give me error : Error(s) found: Code 80244004        Windows Update encountered an unknown error. My System Info : Sony Vaio EA2gfx , Ram : 4GB DDR2 , CPU: Intel Core i 5 I checkd out this links but they didn't help : http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/while-updating-i-am-getting-the-error-code/0b9b756c-5b6e-4571-838e-f90c48a4e00c https://www.calguns.net/calgunforum/showthread.php?t=583860 http://www.sevenforums.com/windows-updates-activation/235807-windows-update-error-80244004-a.html Please help me, thanks.

    Read the article

  • Severe errors in solr configuration: Error loading class 'solr.TrieDateField'

    - by James Lawruk
    Installed Solr on my Windows XP PC. Tomcat seems to be working fine. Cannot get Solr to work. I noticed the TrieDateField is declared in a file called schema.xml in the SolrHome directory. Any thoughts? The Url http://localhost:8080/solr/ returns: HTTP Status 500 - Severe errors in solr configuration. Check your log files for more detailed information on what may be wrong. If you want solr to continue after configuration errors, change: false in null ------------------------------------------------------------- org.apache.solr.common.SolrException: Unknown fieldtype 'date' specified on field updated Here is an excerpt from the catalina log file: SEVERE: org.apache.solr.common.SolrException: Error loading class 'solr.TrieDateField' at org.apache.solr.core.SolrResourceLoader.findClass(SolrResourceLoader.java:273) Caused by: java.lang.ClassNotFoundException: solr.TrieDateField

    Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >