Search Results

Search found 4900 results on 196 pages for 'michael palmeter (exalogic pm)'.

Page 187/196 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

  • Group Policy error 1006 with and error code 52

    - by Bernesto
    I have a hyper-v cluster operating on win2k8 R2 in a 2003 forest. These servers are at our NOC with a DC that connects to our PDC at HQ via a persistent VPN. The cluster boxes are reporting a error event ID 1006 shown below. The DC is also reporting an error 5805 also shown below. I have found numorus posts regarding 1006 errors, but none for error ID 52's. It's weird, I can ping and I can browse network shares on the DC from each. I thought maybe a DNS or net work issue, but nslook up works too. Event 1006 <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" /> <EventID>1006</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>1</Opcode> <Keywords>0x8000000000000000</Keywords> <TimeCreated SystemTime="2013-12-17T00:08:19.582292600Z" /> <EventRecordID>41808</EventRecordID> <Correlation ActivityID="{26B10592-6228-4A3E-845B-E04B49702A54}" /> <Execution ProcessID="964" ThreadID="1384" /> <Channel>System</Channel> <Computer>NEOREEFVH1.neoreef.com</Computer> <Security UserID="S-1-5-18" /> </System> <EventData> <Data Name="SupportInfo1">1</Data> <Data Name="SupportInfo2">5012</Data> <Data Name="ProcessingMode">0</Data> <Data Name="ProcessingTimeInMilliseconds">1138</Data> <Data Name="ErrorCode">52</Data> <Data Name="ErrorDescription">Unavailable</Data> <Data Name="DCName" /> </EventData> </Event> Event 5805 Event Type: Error Event Source: NETLOGON Event Category: None Event ID: 5805 Date: 12/16/2013 Time: 2:32:01 PM User: N/A Computer: NEOREEFSRV15 Description: The session setup from the computer NEOREEFVH3 failed to authenticate. The following error occurred: Access is denied. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 22 00 00 c0 "..À Here are the networks on the hosts: Any with a "Enabled" Are virtual switches.

    Read the article

  • Task Scheduler permissions error for some jobs

    - by MaseBase
    I have recently moved to a 64-bit Windows Server 2008 R2. I setup my Scheduled Tasks to run under one user (TaskUser) specifically created for the scheduler and most run just fine. However some of them do not run under TaskUser but will for my own credentials. Here is the Event Log entry I found, which from my research points me to believe that it doesn't have permissions, but it does. It also has the option "Run with highest privileges" checked on. I have seen this particular checkbox work wonders on some tasks, but I have a number of them that it's not helping for. The error is ERROR_ELEVATION_REQUIRED but the user is a member of the administrators group and has folder/file permission and is set to "Run with highest privileges" Log Name: Microsoft-Windows-UAC/Operational Source: Microsoft-Windows-UAC Date: 4/27/2010 2:21:44 PM Event ID: 1 Task Category: (1) Level: Error Keywords: User: LIVE\TaskUser Computer: www2 Description: The process failed to handle ERROR_ELEVATION_REQUIRED during the creation of a child process. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-UAC" Guid="{E7558269-3FA5-46ED-9F4D-3C6E282DDE55}" /> <EventID>1</EventID> <Version>0</Version> <Level>2</Level> <Task>1</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000000</Keywords> <TimeCreated SystemTime="2010-04-27T21:21:44.407053800Z" /> <EventRecordID>19</EventRecordID> <Correlation /> <Execution ProcessID="2460" ThreadID="5960" /> <Channel>Microsoft-Windows-UAC/Operational</Channel> <Computer>www2</Computer> <Security UserID="S-1-5-21-4017510424-2083581016-1307463562-1640" /> </System> <EventData></EventData> </Event> The errors shown in the Task Scheduler History tab display these results and states This operation requires an interactive window station. (0x800705B3) EventID 103 Task Scheduler failed to launch action "F:\App\Path\ConsoleApp.exe" in instance "{1a6d3450-b85a-40c0-b3db-72b98c1aa395}" of task "\taskFolder\taskName". Additional Data: Error Value: 2147943859. EventID 203 Task Scheduler failed to start instance "{1a6d3450-b85a-40c0-b3db-72b98c1aa395}" of "\taskFolder\taskName" task for user "LIVE\TaskUser" . Additional Data: Error Value: 2147943859.

    Read the article

  • SBS 2008 Backup Drive Full - Error Code '2147942512'

    - by HK1
    We are using Windows Backup on SBS 2008 SP2 and backing up to 1TB external hard drives. Recently after switching drives our backup started failing because the backup drive is full and auto-delete isn't automatically deleting older backups/show copies. I'm trying to get more information to help me effectively prevent this problem from reoccurring in the future. How I can tell that the drive is getting full: In the event viewer under Windows Logs Application, I'm seeing Event ID 517 but it fails to show an intelligible description. However, under Applications and Services Logs Microsoft Windows Backup Operational, I'm seeing an event with the ID of 5 and a description like this: Backup started at '10/4/2011 12:30:12 PM' failed with following error code '2147942512'. One of the most informative posts I've found on this error is located on Microsoft's Technet Forums here. In that post, a Microsoft representative gives this hazy explanation: auto-delete feature to ensure that at least some old backup copies are maintained on the disk -- does not automatically delete backups if space utilization by older copies is less than 1/8 of the disk size or in other words, 13% of the disk size. that means if the one full backup copy does not fit in the 7/8 of the disk size, backup may fail with disk full error. auto-delete will not automatically delete older versions to reclaim more older versions of backup. In the above explanation, I do not understand what is meant by "older copies" except that it appears that anything older than the very last shadow copy would be considered "older copies". I'm going to make the assumption that this problem where auto-delete will not work will affect any hard drive that is large enough to make an effective backup drive, or in other words, any hard drive that is large enough to hold more than one backup/shadow copy at once. The same MS representative proposes the solution of using a larger backup drive. I can't understand how this will help. It appears to me it will simply delay the problem until a later date. In order to resolve this problem for now, I did the following: Assign the backup drive a disk letter under disk management. Run the command line with Administrative rights. diskshadow.exe [enter] delete shadows oldest x: [enter] (where X: is the letter you assigned your backup drive) I manually ran the above command some 60 or 80 times to free up about 200 GB of space on my 1 Terrabyte External Hard drive. However, I do not feel this is a satisfactory solution to prevent the problem from happening again in the future. Does anyone have a solution to prevent your Windows Server backup drive from getting full?

    Read the article

  • How do I get a .Net 4.0 app to coexist as an application under a SharePoint 2007 website in IIS v7?

    - by Craig Nakamoto
    I have created a small .Net 4.0 website and installed it on my SharePoint server as a separate web site in IIS v7 (using port 8008 for now). I had to install the .Net 4 framework, set up the database, etc. and this all went smoothly and my app works as a standalone website. Now I am trying to get pages from my website to show up in SharePoint 2007. For various reasons (the SharePoint site is using SSL, security, etc.) I now need to move my .Net app to run under the SharePoint 2007 site in IIS. I have added it as an 'Application' and set it up with the same .Net v4 application pool and settings that were working when it was set up as a standalone site. Now when I try to access the application I get the error at the end of this description. Any help would be greatly appreciated. I already tried following the instructions on this post: http://blogs.msdn.com/sgoodyear/archive/2007/05/07/custom-web-applications-coexisting-with-sharepoint-2007.aspx but that did not help. Thanks! Craig p.s. Here are the error details: Log Name: Application Source: ASP.NET 4.0.30319.0 Date: 11/05/2010 11:49:31 AM Event ID: 1310 Task Category: Web Event Level: Warning Keywords: Classic User: N/A Computer: GGI-SP1.ggi.ca Description: Event code: 3008 Event message: A configuration error has occurred. Event time: 11/05/2010 11:49:31 AM Event time (UTC): 11/05/2010 3:49:31 PM Event ID: 559d7ac619344f3499a4a31c6c9e58cd Event sequence: 1 Event occurrence: 1 Event detail code: 0 Application information: Application domain: /LM/W3SVC/1653978112/ROOT/bidmonitor-1-129180665715766107 Trust level: Application Virtual Path: /bidmonitor Application Path: C:\inetpub\wwwroot\bidmonitor\ Machine name: GGI-SP1 Process information: Process ID: 5272 Process name: w3wp.exe Account name: NT AUTHORITY\NETWORK SERVICE Exception information: Exception type: ConfigurationErrorsException Exception message: Could not find permission set named 'ASP.Net'. at System.Web.Hosting.ApplicationManager.CreateAppDomainWithHostingEnvironment(String appId, IApplicationHost appHost, HostingEnvironmentParameters hostingParameters) at System.Web.HttpRuntime.HostingInit(HostingEnvironmentFlags hostingFlags, PolicyLevel policyLevel, Exception appDomainCreationException) Request information: Request URL: gginet.ggi.ca/bidmonitor Request path: /bidmonitor User host address: 10.10.1.33 User: Is authenticated: False Authentication Type: Thread account name: NT AUTHORITY\NETWORK SERVICE Thread information: Thread ID: 3 Thread account name: NT AUTHORITY\NETWORK SERVICE Is impersonating: False Stack trace: at System.Web.HttpRuntime.HostingInit(HostingEnvironmentFlags hostingFlags, PolicyLevel policyLevel, Exception appDomainCreationException)

    Read the article

  • Windows 7 Complete PC Backup - Fails with error code: 0x80070002

    - by leeand00
    While doing a Complete PC Backup in Windows 7 I received dialog reading: Windows Backup...error The backup did not complete successfully. Open the Backup and Restore Control Panel to view settings From there I clicked the Options button. Windows Backup: Troubleshooting Options Check your backup Windows Backup encountered invalid MediaID.bin file on the drive where the backup is saved. Restore from a different backup or delete the MediaID.bin file and try to create another backup. The MediaID.bin file can be found under \MediaID.Bin & \\MediaId.Bin. I deleted the file in question (MediaID.bin) from X:\ (one of the drives being backedup( and tried the backup again. Next I was presented with a dialog that read: Windows Backups: Troubleshooting Options Check your backup The system connot find the file specified. Try to run backup again Change backup settings Backup Time: 2/10/2010 12:17 PM Backup location: FreeAgent Drive (E:) Error code: 0x80070002 Additionally I checked the error log and I found this: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Windows Backup" /> <EventID Qualifiers="0">4104</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2010-02-10T17:17:48.000000000Z" /> <EventRecordID>5107</EventRecordID> <Channel>Application</Channel> <Computer>leeand00-PC</Computer> <Security /> </System> - <EventData> <Data>The system cannot find the file specified. (0x80070002)</Data> <Binary>02000780E30500003F0900005B090000420ED1665C2BEE174B64529CB14610EA71000000</Binary> </EventData> </Event> Viewed the following document: http://blogs.technet.com/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-pc-backup-problems-updated.aspx searched for 0x80070002 and tried and follow the directions... I noticed that none of the profiles was missing a ProfileImagePath, I also noticed that the people commenting on the page said that they weren't missing it either. I'm currently trying the backup again, but this time I unchecked all of the user's profiles and opted only to backup the two drives X: and C: on to E:\ I'll let you know what happens. Any ideas?

    Read the article

  • Output php mail calls to log file

    - by Tom McQuarrie
    This question relates to the question found here: Find the php script thats sending mails Trying to do the exact same thing but can't get the log to output what I need. Not too experienced with serverfault and ideally I'd post my followup on the original question, or PM adam to see if he ever found a solution, but looks as though server fault doesn't work that way. I can post an "answer" but that's definitely not what this is. I have a script located at /usr/local/bin/sendmail-php-logged, with the following: #!/bin/sh logger -p mail.info sendmail-php: site=${HTTP_HOST}, client=${REMOTE_ADDR}, script=${SCRIPT_NAME}, filename=${SCRIPT_FILENAME}, docroot=${DOCUMENT_ROOT}, pwd=${PWD}, uid=${UID}, user=$(whoami) /usr/sbin/sendmail -t -i $* This is logging to /var/log/maillog, but as Adam mentions in his question, none of the server variables work. Output I'm getting is: Oct 4 12:16:21 fluke logger: sendmail-php: site=, client=, script=, filename=, docroot=, pwd=/var/www/html/aro_chroot/sites/arocms, uid=48, user=apache Oct 4 12:16:21 fluke logger: sendmail-php: site=, client=, script=, filename=, docroot=, pwd=/var/www/html/aro_chroot/sites/arocms, uid=48, user=apache Oct 4 12:17:03 fluke logger: sendmail-php: site=, client=, script=, filename=, docroot=, pwd=/var/www/html/aro_chroot/sites/arocms, uid=48, user=apache Oct 4 12:17:05 fluke logger: sendmail-php: site=, client=, script=, filename=, docroot=, pwd=/root, uid=0, user=root Oct 4 12:17:11 fluke logger: sendmail-php: site=, client=, script=, filename=, docroot=, pwd=/var/www/html/aro_chroot/sites/arocms, uid=48, user=apache Oct 4 12:17:14 fluke logger: sendmail-php: site=, client=, script=, filename=, docroot=, pwd=/root, uid=0, user=root Oct 4 12:17:29 fluke logger: sendmail-php: site=, client=, script=, filename=, docroot=, pwd=/root, uid=0, user=root Oct 4 12:17:41 fluke logger: sendmail-php: site=, client=, script=, filename=, docroot=, pwd=/root, uid=0, user=root User ID, current user, and pwd are all working, probably because they're globally accessible script resources, and not specific to PHP, like all the others are. I've tried using other server variables as per labradort's instructions, but no joy. Here's some sample tests: logger -p mail.info sendmail-php SCRIPT_NAME: ${SCRIPT_NAME} logger -p mail.info sendmail-php SCRIPT_FILENAME: ${SCRIPT_FILENAME} logger -p mail.info sendmail-php PATH_INFO: ${PATH_INFO} logger -p mail.info sendmail-php PHP_SELF: ${PHP_SELF} logger -p mail.info sendmail-php DOCUMENT_ROOT: ${DOCUMENT_ROOT} logger -p mail.info sendmail-php REMOTE_ADDR: ${REMOTE_ADDR} logger -p mail.info sendmail-php SCRIPT_NAME: $SCRIPT_NAME logger -p mail.info sendmail-php SCRIPT_FILENAME: $SCRIPT_FILENAME logger -p mail.info sendmail-php PATH_INFO: $PATH_INFO logger -p mail.info sendmail-php PHP_SELF: $PHP_SELF logger -p mail.info sendmail-php DOCUMENT_ROOT: $DOCUMENT_ROOT logger -p mail.info sendmail-php REMOTE_ADDR: $REMOTE_ADDR And the output: Oct 4 12:58:02 fluke logger: sendmail-php SCRIPT_NAME: Oct 4 12:58:02 fluke logger: sendmail-php SCRIPT_FILENAME: Oct 4 12:58:02 fluke logger: sendmail-php PATH_INFO: Oct 4 12:58:02 fluke logger: sendmail-php PHP_SELF: Oct 4 12:58:02 fluke logger: sendmail-php DOCUMENT_ROOT: Oct 4 12:58:02 fluke logger: sendmail-php REMOTE_ADDR: Oct 4 12:58:02 fluke logger: sendmail-php SCRIPT_NAME: Oct 4 12:58:02 fluke logger: sendmail-php SCRIPT_FILENAME: Oct 4 12:58:02 fluke logger: sendmail-php PATH_INFO: Oct 4 12:58:02 fluke logger: sendmail-php PHP_SELF: Oct 4 12:58:02 fluke logger: sendmail-php DOCUMENT_ROOT: Oct 4 12:58:02 fluke logger: sendmail-php REMOTE_ADDR: I'm running php 5.3.10. Unfortunately register_globals is on, for compatibility with legacy systems, but you wouldn't think that would cause the environment variables to stop working. If someone can give me some hints as to why this might not be working I'll be a very happy man :)

    Read the article

  • Unable to ping local machines by name in Windows 7

    - by aardvarkk
    I'm having a strange (and persistent!) problem with pinging local machines on my network by name. I believe my machine (Windows 7 64-bit) is the only one having this issue. This is over a wireless connection. As an example, consider a device on my network by the name of WDTVLiveHub. It's a Western Digital Live Hub (surprise!). If I go to my router's DHCP Client Table in the browser (my router is a WRT400N), I see this entry: WDTVLiveHub 192.168.1.101 Great. So I try to ping that IP address: ping 192.168.1.101 Pinging 192.168.1.101 with 32 bytes of data: Reply from 192.168.1.101: bytes=32 time=9ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Ping statistics for 192.168.1.101: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 9ms, Maximum = 16ms, Average = 14ms OK, still looking good. Now I try to ping it by name: ping WDTVLiveHub Ping request could not find host WDTVLiveHub. Please check the name and try again. From what I've read, this implies a problem with DNS servers and host name lookups. Interestingly, if I type the following: pathping 192.168.1.101 I get this output: Tracing route to WDTVLIVEHUB [192.168.1.101] over a maximum of 30 hops: 0 Scotty [192.168.1.103] 1 WDTVLIVEHUB [192.168.1.101] Computing statistics for 25 seconds... Source to Here This Node/Link Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address 0 Scotty [192.168.1.103] 1/ 100 = 1% | 1 12ms 1/ 100 = 1% 0/ 100 = 0% WDTVLIVEHUB [192.168.1.101] Trace complete. Scotty is obviously the name of my local machine. So it's able to find the name somehow when I do that approach... ipconfig /all shows the following under DNS servers: DNS Servers . . . . . . . . . . . : 192.168.1.1 ***.***.***.*** ***.***.***.*** Where the * represents the same DNS servers that show up in my router under DNS 1 and DNS 2 through the Internet. For completeness, here's the whole output of ipconfig /all: Windows IP Configuration Host Name . . . . . . . . . . . . : Scotty Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Peer-Peer IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1397 WLAN Mini-Card Physical Address. . . . . . . . . : 0C-EE-E6-D1-07-E8 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2002:d83a:31e5:1234:5592:398e:8968:43d1(Preferred) Temporary IPv6 Address. . . . . . : 2002:d83a:31e5:1234:ecce:2f79:72a5:5273(Preferred) Link-local IPv6 Address . . . . . : fe80::5592:398e:8968:43d1%26(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.103(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : September-17-12 11:05:57 PM Lease Expires . . . . . . . . . . : September-18-12 11:05:57 PM Default Gateway . . . . . . . . . : fe80::200:ff:fe00:0%26 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 537718502 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-80-3D-D7-00-26-B9-0D-08-70 DNS Servers . . . . . . . . . . . : 192.168.1.1 ***.***.***.*** ***.***.***.*** NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VirtualBox Host-Only Network: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter Physical Address. . . . . . . . . : 08-00-27-00-98-9A DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::b48a:916b:c0f:fb29%23(Preferred) Autoconfiguration IPv4 Address. . : 169.254.251.41(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 570949671 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-80-3D-D7-00-26-B9-0D-08-70 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 15: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{55899375-C31D-4173-A529-4427D63FD28B}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{64B8F35F-A6AB-4D6B-B1D5-DD95F57B1458}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Not sure exactly how to diagnose exactly what's going on... but the problem is really frustrating! The biggest problem is that my mapped network drives have to be done by IP, and then any time the router assigns new IP addresses to those devices, all of my network shares break again. Stinks! Would love some assistance on possible solutions. I've tried all of this netsh catalog resetting and that didn't seem to fix anything at all. Would love an explanation of what's going wrong, too, rather than blindly resetting things! Thanks!

    Read the article

  • DVD Drive Failing on Windows 7

    - by Seth Spearman
    Hello, I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

    Read the article

  • DVD Drive Failing on Windows 7

    - by Seth Spearman
    I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

    Read the article

  • Download - Upload is too slow on Centos

    - by Mehdi
    My download/upload in server and out of server is too slow (around 50 KB/s !) ! Did I miss some configuration ? Some information: CentOS release 6.3 uptime load average: 0.17, 0.32, 0.37 Memory free -m total used free shared buffers cached Mem: 24009 21988 2021 0 806 18098 -/+ buffers/cache: 3083 20926 Swap: 4095 28 4067 lshw -C network *-network description: Ethernet interface product: 82574L Gigabit Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 00 serial: 00:25:90:70:17:4a size: 100MB/s capacity: 1GB/s width: 32 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=off broadcast=yes driver=e1000e driverversion=1.9.5-k duplex=full firmware=2.1-2 ip=108.175.8.123 latency=0 link=yes multicast=yes port=twisted pair speed=100MB/s resources: irq:16 memory:fb900000-fb91ffff ioport:e000(size=32) memory:fb920000-fb923fff ethtool ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off MDI-X: off Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000001 (1) Link detected: yes dmesg |grep e1000e dmesg |grep e1000e e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:02:00.0: Disabling ASPM L0s e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 e1000e 0000:02:00.0: setting latency timer to 64 e1000e 0000:02:00.0: irq 33 for MSI/MSI-X e1000e 0000:02:00.0: irq 34 for MSI/MSI-X e1000e 0000:02:00.0: irq 35 for MSI/MSI-X e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:70:17:4a e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: eth0: Unsupported Speed/Duplex configuration e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e 0000:02:00.0: Disabling ASPM L1 e1000e 0000:02:00.0: eth0: changing MTU from 1500 to 9000 e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO

    Read the article

  • Unable to use TweetDeck on Windows due to "Ooops, TweetDeck can't find your data" and "Sorry, Adobe

    - by Matt
    I'm running Adobe AIR 1.5.2 (latest) on Windows 7 (64-bit RTM) and downloaded TweetDeck 0.31.1 (latest). When I run TweetDeck I get the following errors: Ooops, TweetDeck can't find your data and Sorry, Adobe AIR has a problem running on this computer Other AIR applications install and run fine. I've uninstalled both TweetDeck and AIR and reinstalled. Following the uninstalls I've also removed all on-disk references to both TweetDeck and AIR, but no luck. UPDATE: Using Process Monitor I did a trace of Tweetdeck from the moment it launched until the first error occurred. I saw the following information in the output of the trace: 1 5:22:18.6522338 PM TweetDeck.exe 5580 CreateFile D:\ProgramData\Microsoft\Windows\Start Menu\Programs\rs\??\d:\Use\myusername\AppData\Roaming\Adobe\AIR\ELS\TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1\PrivateEncryptedDatak NAME INVALID Desired Access: Generic Write, Read Attributes, Disposition: OverwriteIf, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: N, ShareMode: Read, Write, AllocationSize: 0 In this trace output, Tweetdeck.exe is trying to create the file D:\ProgramData\Microsoft\Windows\Start Menu\Programs\rs\??\d:\Use\myusername\AppData\Roaming\Adobe\AIR\ELS\TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1\PrivateEncryptedDatak but the path specified is invalid. When looking at the path you can see that it is indeed an invalid path. First, there’s the “??” portion which doesn’t exist in the file system since the “?” is an invalid character in Windows/NTFS file systems. Additionally, looking at this path, it actually seems to be composed of two parts (is the "??" a delimiter?): Part 1: D:\ProgramData\Microsoft\Windows\Start Menu\Programs\rs\?? Part 2: d:\Use\myusername\AppData\Roaming\Adobe\AIR\ELS \TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1\PrivateEncryptedDatak (the problem here is that d:\Use... doesn’t even exist. What seems to be happening here is that Tweetdeck is looking for the user credentials (the “PrivateEncryptedDatak” file) but it’s looking in the wrong place, can’t find the file, and hence the error that Tweetdeck is giving (shown in the screenshot). I'm trying to determine how TweetDeck is getting this path. I searched the contents of all files on my hard disk hoping to find some TweetDeck or Adobe AIR configuration file containing this incorrect path, but I was unable to find anything. UPDATE: See Carl's comment regarding directory junctions and symbolic links under my accepted answer. This ended up being the problem. Edit by Gnoupi: People, the answer section is there to provide an actual ANSWER, not to say you have the same issue. It doesn't help anyone that you have the same problem. Eventually, if you think this is really worth mentioning, put it as a comment under the question. But simply, if what you want to add is not an answer to the question, then don't post it as an answer. This is not a forum, I recommend new users to read the FAQ: http://superuser.com/faq

    Read the article

  • Force Finder to log in as Guest to a SMB share

    - by slhck
    I have a QNAP NAS that offers a few SMB shares. As I'm in a trusted environment, my shares are accessible as guest rather than with a combination of username and password. Problem Now, when I click the name of the device in Finder's sidebar, I get the black "Connection failed" bar, with the option "Connect as...". When I click that, I receive: I can however press ? + K and enter the server's name manually, which gets me to this window: Here, I have to select "guest". Now, I can select one of the shares to connect to, and I'm finally connected to the server. If I select it in the sidebar, I get a list of all shares available, because I'm connected as "guest", obviously: What I need Well, as soon as I unmount all shares, I have to go through the same procedure of manually logging in as "guest" again, which I find quite annoying. Is there any way I could get Finder (or the underlying SMB client) to know which credentials to use? Or should I look for the solution rather on the server side? (I know that other SMB shares seem to work fine in my network) Diagnostics The only thing I can get out of Console.app is: 5/15/11 7:36:40 PM /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[200] SharePointBrowser::handleOpenCallBack returned 64 This message occurs when I click the name of the SMB server in the Finder sidebar. Here's the output of `smbclient -L meredith -U guest -d=2 charon:~ werner$ smbclient -L meredith -U guest -d=2 added interface ip=192.168.100.11 bcast=192.168.100.255 nmask=255.255.255.0 tdb(unnamed): tdb_open_ex: could not open file /private/var/samba/gencache.tdb: Permission denied Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Password: Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Sharename Type Comment --------- ---- ------- music Disk movies Disk photos Disk software Disk archive Disk backups Disk IPC$ IPC IPC Service (NAS Server) Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Server Comment --------- ------- Workgroup Master --------- ------- WORKGROUP MEREDITH Also, things I've tried: There is no relevant entry in the Keychain (but why would it, I'm only connecting as guest) Connecting with user name "Guest" and empty password logs me in but still after ejecting the last share, I get the same "Connection failed" error as before. The appropriate entry is made in the Keychain but obviously has no effect.

    Read the article

  • Force Finder to log in as Guest to a SMB share

    - by slhck
    I have a QNAP NAS that offers a few SMB shares. As I'm in a trusted environment, my shares are accessible as guest rather than with a combination of username and password. Problem Now, when I click the name of the device in Finder's sidebar, I get the black "Connection failed" bar, with the option "Connect as...". When I click that, I receive: I can however press ? + K and enter the server's name manually, which gets me to this window: Here, I have to select "guest". Now, I can select one of the shares to connect to, and I'm finally connected to the server. If I select it in the sidebar, I get a list of all shares available, because I'm connected as "guest", obviously: What I need Well, as soon as I unmount all shares, I have to go through the same procedure of manually logging in as "guest" again, which I find quite annoying. Is there any way I could get Finder (or the underlying SMB client) to know which credentials to use? Or should I look for the solution rather on the server side? (I know that other SMB shares seem to work fine in my network) Diagnostics The only thing I can get out of Console.app is: 5/15/11 7:36:40 PM /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder[200] SharePointBrowser::handleOpenCallBack returned 64 This message occurs when I click the name of the SMB server in the Finder sidebar. Here's the output of `smbclient -L meredith -U guest -d=2 charon:~ werner$ smbclient -L meredith -U guest -d=2 added interface ip=192.168.100.11 bcast=192.168.100.255 nmask=255.255.255.0 tdb(unnamed): tdb_open_ex: could not open file /private/var/samba/gencache.tdb: Permission denied Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Password: Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Sharename Type Comment --------- ---- ------- music Disk movies Disk photos Disk software Disk archive Disk backups Disk IPC$ IPC IPC Service (NAS Server) Got a positive name query response from 192.168.100.100 ( 192.168.100.100 ) Domain=[MEREDITH] OS=[Unix] Server=[Samba 3.5.2] Server Comment --------- ------- Workgroup Master --------- ------- WORKGROUP MEREDITH Also, things I've tried: There is no relevant entry in the Keychain (but why would it, I'm only connecting as guest) Connecting with user name "Guest" and empty password logs me in but still after ejecting the last share, I get the same "Connection failed" error as before. The appropriate entry is made in the Keychain but obviously has no effect.

    Read the article

  • Custom built machine has much higher power consumption than expected

    - by foraidt
    I built a machine according to the specs of a computer magazine (c't, Germany). According to the magazine, the power consumption should be at around 10W. I don't want to go into the specifics of the hardware but rather ask for general advice on where to look: I updated the BIOS/UEFI version to the latest version, installed all the recommended drivers and unplugged all hardware that's not necessary to boot into Windows. All that was left is the power supply, mainboard, cpu, cpu cooler and one SSD drive. But still I measured a power consumption of 50W, which is 40W more than it should be. I tried booting Linux Mint from a USB stick, so I don't think it's some Windows-related problem.. Where else could I look? Update 1 I dind't want the question to get closed for being too localized but if more details are necessary, here they are: The system is a desktop PC. The power consumption is measured using a Brennenstuhl PM 231 device, which was tested also by c't and they found it quite accurate. The PSU is an Enermax ETL300AWT, the mainboard Intel DH87RL (Socket 1150) and the CPU Intel G3220 (Haswell). Update 2 There is no online version of the article*. The most details I found can be read on its project page (in German, though...) (*)You can pay for downloadable PDFs, however. English translation of that project page Update 3 Regarding the sceptics: It may sound ridiculous but apparently 10W idle consumption is possible with Intel's Haswell architecture. As a kind of proof, there's an additional Blog article explicitly listing the steps needed to reduce the idle consumption to 10W. Additional hardware: I measured the consumption without the HDD, and as expected the usage dropped by around 10W. I have no chassis fans and the CPU fan is a "Scythe Mugen 4" model. It runs at around 600rpm so I think it won't draw much. When stripping off all my extra components I should be at 10W. But I'm not getting anywhere near that. I would be happy to see "just" 15W in the stripped down version but currently I'm not getting below 50W no matter which component I remove. As I see it this cannot be explained by the PSU being less efficient at lower consumption. I also waited half an hour or so (also checked that no Windows updates were running in the background) and the consumption dind't drop by more than a few watts.

    Read the article

  • PC freezing when used to print labels

    - by Will
    Hi I have a windows XP machine that is used to print labels from a Zebra label printer. It is connected a member of the domain. I am getting reports that when people try to use the computer it will sometimes be frozen to the point where they have to physically shut the machine down and boot to get it responding. (this happens about once a day). I took a look in Event Viewer and nabbed some of these errors out of it: Event Type: Error Event Source: Userenv Event Category: None Event ID: 1054 Date: 11/12/2010 Time: 9:13:04 AM User: NT AUTHORITY\SYSTEM Computer: FS-LABELMACHINE Description: Windows cannot obtain the domain controller name for your computer network. (A socket operation was attempted to an unreachable host. ). Group Policy processing aborted. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Event Type: Error Event Source: AutoEnrollment Event Category: None Event ID: 15 Date: 11/11/2010 Time: 11:08:25 PM User: N/A Computer: FS-LABELMACHINE Description: Automatic certificate enrollment for local system failed to contact the active directory (0x80072751). A socket operation was attempted to an unreachable host. Enrollment will not be performed. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Hanging application MSACCESS.EXE, version 11.0.8166.0, hang module hungapp, version 0.0.0.0, hang address 0x00000000. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.... SearchIndexer (2420) Unable to write a shadowed header for file C:\Documents and Settings\All Users\Application Data\Microsoft\Search\Data\Applications\Windows\MSS.chk. Error -1032. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Failed auto update retrieval of third-party root list sequence number from: <http://www.download.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootseq.txt> with error: A connection with the server could not be established For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. I'm not really sure what to make out of this... Thanks for the help in advanced, Will

    Read the article

  • How to install missing Sound Drivers in Ubuntu?

    - by Sakamoto Kazuma
    I seem to be missing drivers for my Gateway laptop MA7. I have looked in System-Admin-Hardware Drivers, but it does not show up in there.There are also no devices listed in Sound-Hardware. I'm guessing at this point that I don't have the driver installed. However, I get the following output: admin@machine001:~$ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xd8240000 irq 22 admin@machine001:~$ And my lspci shows: 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02) 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast Ethernet Controller (rev 14) 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 04:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 04:09.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 04:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) I have also checked alsamixer, and nothing is muted. No headphones plugged into headphone jack either. So the question now is, how do I get sound to work on my laptop? It doesn't work for any application.

    Read the article

  • How does formatting works with a PowerShell function that returns a set of elements?

    - by Steve B
    If I write this small function : function Foo { Get-Process | % { $_ } } And if I run Foo It displays only a small subset of properties: PS C:\Users\Administrator> foo Handles NPM(K) PM(K) WS(K) VM(M) CPU(s) Id ProcessName ------- ------ ----- ----- ----- ------ -- ----------- 86 10 1680 412 31 0,02 5916 alg 136 10 2772 2356 78 0,06 3684 atieclxx 123 7 1780 1040 33 0,03 668 atiesrxx ... ... But even if only 8 columns are shown, there are plenty of other properties (as foo | gm is showing). What is causing this function to show only this 8 properties? I'm actually trying to build a similar function that is returning complex objects from a 3rd party .Net library. The library is flatting a 2 level hierarchy of objects : function Actual { $someDotnetObject.ACollectionProperty.ASecondLevelCollection | % { $_ } } This method is dumping the objects in a list form (one line per property). How can I control what is displayed, keeping the actual object available? I have tried this : function Actual { $someDotnetObject.ACollectionProperty.ASecondLevelCollection | % { $_ } | format-table Property1, Property2 } It shows in a console the expected table : Property1 Property2 --------- --------- ValA ValD ValB ValE ValC ValF But I lost my objects. Running Get-Member on the result shows : TypeName: Microsoft.PowerShell.Commands.Internal.Format.FormatStartData Name MemberType Definition ---- ---------- ---------- Equals Method bool Equals(System.Object obj) GetHashCode Method int GetHashCode() GetType Method type GetType() ToString Method string ToString() autosizeInfo Property Microsoft.PowerShell.Commands.Internal.Format.AutosizeInfo autosizeInfo {get;set;} ClassId2e4f51ef21dd47e99d3c952918aff9cd Property System.String ClassId2e4f51ef21dd47e99d3c952918aff9cd {get;} groupingEntry Property Microsoft.PowerShell.Commands.Internal.Format.GroupingEntry groupingEntry {get;set;} pageFooterEntry Property Microsoft.PowerShell.Commands.Internal.Format.PageFooterEntry pageFooterEntry {get;set;} pageHeaderEntry Property Microsoft.PowerShell.Commands.Internal.Format.PageHeaderEntry pageHeaderEntry {get;set;} shapeInfo Property Microsoft.PowerShell.Commands.Internal.Format.ShapeInfo shapeInfo {get;set;} TypeName: Microsoft.PowerShell.Commands.Internal.Format.GroupStartData Name MemberType Definition ---- ---------- ---------- Equals Method bool Equals(System.Object obj) GetHashCode Method int GetHashCode() GetType Method type GetType() ToString Method string ToString() ClassId2e4f51ef21dd47e99d3c952918aff9cd Property System.String ClassId2e4f51ef21dd47e99d3c952918aff9cd {get;} groupingEntry Property Microsoft.PowerShell.Commands.Internal.Format.GroupingEntry groupingEntry {get;set;} shapeInfo Property Microsoft.PowerShell.Commands.Internal.Format.ShapeInfo shapeInfo {get;set;} Instead of showing the 2nd level child object members. In this case, I can't pipe the result to functions waiting for this type of argument. How does Powershell is supposed to handle such scenario?

    Read the article

  • Recognizing Dell EquilLogic with Nagios

    - by user3677595
    EDIT: All firmware and models are compatible, that is why nothing is posted about it. Okay, so there will be a lot here, so please bare with me. I've been working on this now for a few hours (reading manuals and such) so I'm not just coming here right out of the blue. I am working on a PRE-EXISTING Nagios server where there are several other existing plugins and checks running and working. Now I want to add another server there to check so I made the following modifications: First and foremost, I added a file to /usr/local/nagios/libexec named: check_equallogic.sh. The permissions are 755, the same as all others. I have chowned to nagios:nagios and in the listing it shows the Owner as Nagios. I then added a command to the commands.cfg file in \usr\local\nagios\etc\objects that shows the following: # 'check_equallogic' command definition define command{ command_name check_equallogic command_line $USER1$/check_equallogic -H $HOSTADDRESS$ -C $ARG1$ -t $ARG2$ $ARG3$ } Following this, I created a file named equallogic.cfg in the objects directory and it contains (more or less): define host{ use linux-server ; Inherit default values from a template host_name 172.16.50.11 ; The name we're giving to this device alias EqualLogic ; A longer name associated with the device address 172.16.50.11 ; IP address of the device contact_groups admins } Check Equallogic Information define service{ use generic-service host_name 172.16.50.11 service_description General Information check_command check_equallogic!public!info } After ensuring that permissions are okay for all files, I restart the nagios service, no errors. When I go into the WebGUI, I get the following errors AFTER the check runs: (Return code of 127 is out of bounds - plugin may be missing) Extra, probably unrelated problem Furthermore, when I log into the EquilLogic server, under Audit logs I get the following error: Level: AUDIT Time: 26/05/2014 3:59:13 PM Member: ps4100-1 Subsystem: agent Event ID: 22.7.1 SNMP packet validation failed, request received from 172.16.10.11 An snmpwalk receives a timeout, whereas others succeed. I will work on importing the MIBs tomorrow. The reason why I am mentioning it is because I want to make sure that it is only a MIB issue for the SNMP. If it is, then ignore this area. I am entirely unsure of what to do here.

    Read the article

  • Routing and Remote Access Service won't start after full disk

    - by NKCSS
    The HDD of the server was out of disk space, and after a reboot, RRAS won't start anymore on my 2008 R2 server. Error Details: Log Name: System Source: RemoteAccess Date: 2/5/2012 9:39:52 PM Event ID: 20153 Task Category: None Level: Error Keywords: Classic User: N/A Computer: Windows14111.<snip> Description: The currently configured accounting provider failed to load and initialize successfully. The connection was prevented because of a policy configured on your RAS/VPN server. Specifically, the authentication method used by the server to verify your username and password may not match the authentication method configured in your connection profile. Please contact the Administrator of the RAS server and notify them of this error. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="RemoteAccess" /> <EventID Qualifiers="0">20153</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-02-05T20:39:52.000Z" /> <EventRecordID>12148869</EventRecordID> <Channel>System</Channel> <Computer>Windows14111.<snip></Computer> <Security /> </System> <EventData> <Data>The connection was prevented because of a policy configured on your RAS/VPN server. Specifically, the authentication method used by the server to verify your username and password may not match the authentication method configured in your connection profile. Please contact the Administrator of the RAS server and notify them of this error.</Data> <Binary>2C030000</Binary> </EventData> </Event> I think it has something to do with a corrupt config file, but I am unsure of what to do. I Removed the RRAS role, rebooted, and re-added, but it keeps failing with the same error. Thanks in advance. [UPDATE] If i set the accounting provider from 'Windows' to '' the service starts but VPN won't work. Any ideas how this can be repaired?

    Read the article

  • Complete machine freezes...at a loss

    - by user28818
    Guys, We built around 12 machines a few months ago to run Ubuntu. They each have the following specs: ASUS Z8NA-D6 motherboard Dual quad core Intel(R) Xeon(R) CPU E5520 @ 2.27GHz OCZ Mod Extreme Pro 500W power supply 12 GB Kingston RAM Nvidia GeForce 9800 GT graphics card My machine ran well for awhile. However, it started experiencing random lockups. These lockups are not X lockups, they are complete system freezes. The nic stops responding, the magic sysrq buttons won't work. The machine is dead. I first suspected RAM. Memtest86 didn't find anything, but I replaced the RAM anyway. Still, lockups. So I replaced the graphics card. Still, more lockups. They became more and more frequent and started to happen 2-3 times a day. So I replaced the motherboard and power supply in one fell swoop. Suddenly, no more lockups! Woohoo! Except, a week later, in the morning, the machine wouldn't wake up. I reset it, started it up, and the log files showed the last entry at around 11 pm the evening before. This has started occurring with more frequency...now just about every morning I come in, the machine is locked up, and has been since the night before. Yesterday, in the 3 weeks since I replaced the motherboard and power supply, the machine actually locked up on in in mid-work. This is the first time since replacing the two (MB and PS) that this happened while I was using it. All others occurred while I was away. I'm at a loss. Nothing is in syslog or message that would indicate a problem around the time of the lockup. Temps are good...I use lmsensors to monitor and have a script that writes the output to file every minute. They never get that high. The only thing I haven't replaced at this point is the case and the harddrives. I doubt either could be the cause. What would you do if you were in my shoes? Is there a troubleshooting approach I'm missing? For the record, all of the other machines, all eleven of them, don't have any problems. They're all running the same version of Ubuntu (Lucid) that I am. Thanks!

    Read the article

  • Network unreachable on Ubuntu guest after trying to set up a host only network on Virtualbox

    - by gkb0986
    I have a Mac OS X host and a bunch of guests including Ubuntu and Arch Linux. I was trying to set up a host-only network at eth1 to let me ssh into the system. But now eth0 isn't working properly either. Ubuntu can no longer connect to remote hosts or browse the internet. It tells me that the network is unreachable. What's gone wrong here? I've included some diagnostics below. $ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10968 errors:0 dropped:0 overruns:0 frame:0 TX packets:10968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:897264 (897.2 KB) TX bytes:897264 (897.2 KB) Other diagnostic commands and the output: $sudo lspci -n 00:00.0 0600: 8086:1237 (rev 02) 00:01.0 0601: 8086:7000 00:01.1 0101: 8086:7111 (rev 01) 00:02.0 0300: 80ee:beef 00:03.0 0200: 8086:100e (rev 02) 00:04.0 0880: 80ee:cafe 00:05.0 0401: 8086:2415 (rev 01) 00:06.0 0C03: 106B:003F 00:07.0 0680: 8086:7113 (REV 08) 00:0D.0 0106: 8086:2829 (REV 02) $sudo lshw -c network *-network DISABLED description: Ethernet interface product: 82540EM Gigabit Ethernet Controller vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 logical name: eth0 version: 02 serial: 08:00:27:7d:22:df size: 1Gbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k8-NAPI duplex=full firmware=N/A latency=64 link=no mingnt=255 multicast=yes port=twisted pair speed=1Gbit/s resources: irq:19 memory:f0000000-f001ffff ioport:d010(size=8) $lsmod Module Size Used by nls_utf8 12557 1 isofs 40257 1 vboxsf 43743 2 vesafb 13844 1 snd_intel8x0 38570 2 snd_ac97_codec 134869 1 snd_intel8x0 ac97_bus 12730 1 snd_ac97_codec snd_pcm 97275 2 snd_intel8x0,snd_ac97_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi rfcomm 47604 0 snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event bnep 18281 2 bluetooth 180113 10 rfcomm,bnep ppdev 17113 0 psmouse 97519 0 snd_timer 29990 2 snd_pcm,snd_seq joydev 17693 0 snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq vboxvideo 12622 1 serio_raw 13211 0 snd 79041 11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd vboxguest 235498 7 vboxsf parport_pc 32866 0 drm 241971 2 vboxvideo i2c_piix4 13301 0 snd_page_alloc 18529 2 snd_intel8x0,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp usbhid 47238 0 hid 99636 1 usbhid e1000 108589 0

    Read the article

  • New .NET Library for Accessing the Survey Monkey API

    - by Ben Emmett
    I’ve used Survey Monkey’s API for a while, and though it’s pretty powerful, there’s a lot of boilerplate each time it’s used in a new project, and the json it returns needs a bunch of processing to be able to use the raw information. So I’ve finally got around to releasing a .NET library you can use to consume the API more easily. The main advantages are: Only ever deal with strongly-typed .NET objects, making everything much more robust and a lot faster to get going Automatically handles things like rate-limiting and paging through results Uses combinations of endpoints to get all relevant data for you, and processes raw response data to map responses to questions To start, either install it using NuGet with PM> Install-Package SurveyMonkeyApi (easier option), or grab the source from https://github.com/bcemmett/SurveyMonkeyApi if you prefer to build it yourself. You’ll also need to have signed up for a developer account with Survey Monkey, and have both your API key and an OAuth token. A simple usage would be something like: string apiKey = "KEY"; string token = "TOKEN"; var sm = new SurveyMonkeyApi(apiKey, token); List<Survey> surveys = sm.GetSurveyList(); The surveys object is now a list of surveys with all the information available from the /surveys/get_survey_list API endpoint, including the title, id, date it was created and last modified, language, number of questions / responses, and relevant urls. If there are more than 1000 surveys in your account, the library pages through the results for you, making multiple requests to get a complete list of surveys. All the filtering available in the API can be controlled using .NET objects. For example you might only want surveys created in the last year and containing “pineapple” in the title: var settings = new GetSurveyListSettings { Title = "pineapple", StartDate = DateTime.Now.AddYears(-1) }; List<Survey> surveys = sm.GetSurveyList(settings); By default, whenever optional fields can be requested with a response, they will all be fetched for you. You can change this behaviour if for some reason you explicitly don’t want the information, using var settings = new GetSurveyListSettings { OptionalData = new GetSurveyListSettingsOptionalData { DateCreated = false, AnalysisUrl = false } }; Survey Monkey’s 7 read-only endpoints are supported, and the other 4 which make modifications to data might be supported in the future. The endpoints are: Endpoint Method Object returned /surveys/get_survey_list GetSurveyList() List<Survey> /surveys/get_survey_details GetSurveyDetails() Survey /surveys/get_collector_list GetCollectorList() List<Collector> /surveys/get_respondent_list GetRespondentList() List<Respondent> /surveys/get_responses GetResponses() List<Response> /surveys/get_response_counts GetResponseCounts() Collector /user/get_user_details GetUserDetails() UserDetails /batch/create_flow Not supported Not supported /batch/send_flow Not supported Not supported /templates/get_template_list Not supported Not supported /collectors/create_collector Not supported Not supported The hierarchy of objects the library can return is Survey List<Page> List<Question> QuestionType List<Answer> List<Item> List<Collector> List<Response> Respondent List<ResponseQuestion> List<ResponseAnswer> Each of these classes has properties which map directly to the names of properties returned by the API itself (though using PascalCasing which is more natural for .NET, rather than the snake_casing used by SurveyMonkey). For most users, Survey Monkey imposes a rate limit of 2 requests per second, so by default the library leaves at least 500ms between requests. You can request higher limits from them, so if you want to change the delay between requests just use a different constructor: var sm = new SurveyMonkeyApi(apiKey, token, 200); //200ms delay = 5 reqs per sec There’s a separate cap of 1000 requests per day for each API key, which the library doesn’t currently enforce, so if you think you’ll be in danger of exceeding that you’ll need to handle it yourself for now.  To help, you can see how many requests the current instance of the SurveyMonkeyApi object has made by reading its RequestsMade property. If the library encounters any errors, including communicating with the API, it will throw a SurveyMonkeyException, so be sure to handle that sensibly any time you use it to make calls. Finally, if you have a survey (or list of surveys) obtained using GetSurveyList(), the library can automatically fill in all available information using sm.FillMissingSurveyInformation(surveys); For each survey in the list, it uses the other endpoints to fill in the missing information about the survey’s question structure, respondents, and responses. This results in at least 5 API calls being made per survey, so be careful before passing it a large list. It also joins up the raw response information to the survey’s question structure, so that for each question in a respondent’s set of replies, you can access a ProcessedAnswer object. For example, a response to a dropdown question (from the /surveys/get_responses endpoint) might be represented in json as { "answers": [ { "row": "9384627365", } ], "question_id": "615487516" } Separately, the question’s structure (from the /surveys/get_survey_details endpoint) might have several possible answers, one of which might look like { "text": "Fourth item in dropdown list", "visible": true, "position": 4, "type": "row", "answer_id": "9384627365" } The library understands how this mapping works, and uses that to give you the following ProcessedAnswer object, which first describes the family and type of question, and secondly gives you the respondent’s answers as they relate to the question. Survey Monkey has many different question types, with 11 distinct data structures, each of which are supported by the library. If you have suggestions or spot any bugs, let me know in the comments, or even better submit a pull request .

    Read the article

  • Browsing Your ADF Application Module Pooling Params with WLST

    - by Duncan Mills
    In ADF 11g you can of course use Enterprise Manager (EM) to browse and configure the settings used by ADF Business Components  Application Modules, as shown here for one of my sample deployed applications. This screen you can access from the EM homepage by pulling down the Application Deployment menu, and then ADF > Configure ADF Business Components. Then select the profile that you are actually using (Hint: look in the DataBindings.cpx file to work this out - probably the "Local" version unless you've explicitly changed it. )So, from this screen you can change the pooling parameters and the world is good. But what if you don't have EM installed? In that case you can use the WebLogic scripting capabilities to view (and Update) the MBean Properties. Explanation The pooling parameters and many others are handled through Message Driven Beans that are created for the deployed application in the server. In the case of the ADF BC pooling parameters, this MBean will combine the configuration deployed as part of the application, along with any overrides defined as -D environement commands on the JVM startup for the application server instance. Using WLST to Browse the Bean ValuesFor our purposes here I'm doing this interactively, although you can also write a script or write Java to achieve the same thing.Step 0: Before You Start You will need the followingAccess to the console on the machine that is running the serverThe WebLogic Admin username and password (I'll use weblogic/password as my example here - yours will be different)The name of the deployed application (in this example FMWdh_application1)The package path to the bc4j.xcfg file (in this example oracle.demo.fmwdh.model.service.common.bc4j.xcfg) This is based on the default path for your model project so it shoudl be fairly easy to work out.The BC configuration your AM is actually running with (look in the DataBindings.cpx for that. In this example DealHelpServiceDeployed is the profile being used..)Step 1: Start the WLST consoleTo start at the beginning, you need to run the WLST command but that needs a little setup:Change to the wlserver_10.3/server/bin directory e.g. under your Fusion Middleware Home[oracle@mymachine] cd /home/oracle/FMW_R1/wlserver_10.3/server/binSet your environment using the setWLSEnv script. e.g. on Oracle Enterprise Linux:[oracle@mymachine bin] source setWLSEnv.shStart the WLST interactive console[oracle@mymachine bin] java weblogic.WLSTInitializing WebLogic Scripting Tool (WLST) ...Welcome to WebLogic Server Administration Scripting ShellType help() for help on available commandswls:/offline> Step 2:Enter the WLST commandsConnect to the server wls:> connect('weblogic','password')Change to the Custom root, this is where the AMPooling MBeans are registered wls:> custom()Change to the b4j MBean directorywls:> cd ('oracle.bc4j.mbean.config')Work out the correct directory for the AM configuration you need. This is the difficult bit, not because it's hard to do, but because the names are long. The structure here is such that every child MBean is displayed at the same level as the parent, so for each deployed application there will be many directories shown. In fact, do an ls() command here and you'll see what I mean. Each application will have one MBean for the app as a whole, and then for each deployed configuration in the .xcfg file you'll see: One for the config entry itself, and then one each for Security, DB Connection and AM Pooling. So if you deploy an app with just one configuration you'll see 5 directories, if it has two configurations in the .xcfg you'll see 9 and so on.The directory you are looking for will contain those bits of information you gathered in Step 0, specifically the Application Name, the configuration you are using and the xcfg name: First of all narrow your list to just those directories returned from the ls() command that begin oracle.bc4j.mbean.config:name=AMPool. These identify the AM pooling MBeans for all the deployed applications. Now look for the correct application name e.g. Application=FMWdh_application1The config setting in that sub-list should already be correct and match what you expect e.g. oracle.bc4j.mbean.config=oracle.demo.fmwdh.model.service.common.bc4j.xcfgFinally look for the correct value for the AppModuleConfigType e.g. oracle.bc4j.mbean.config.AppModuleConfigType=DealHelpServiceDeployedNow you have identified the correct directory name, change to that (keep the name on one line of course - I've had to split it across lines here for clarity:wls:> cd ('oracle.bc4j.mbean.config:name=AMPool,     type=oracle.bc4j.mbean.config.AppModuleConfigType.AMPoolType,    oracle.bc4j.mbean.config=oracle.demo.fmwdh.model.service.common.bc4j.xcfg,    Application=FMWdh_application1,    oracle.bc4j.mbean.config.AppModuleConfigType=DealHelpServiceDeployed') Now you can actually view the parameter values with a simple ls() commandwls:> ls()And here's the output in which you can view the realtime values of the various pool settings: -rw- AmpoolConnectionstrategyclass oracle.jbo.common.ampool.DefaultConnectionStrategy -rw- AmpoolDoampooling true -rw- AmpoolDynamicjdbccredentials false -rw- AmpoolInitpoolsize 2 -rw- AmpoolIsuseexclusive true -rw- AmpoolMaxavailablesize 40 -rw- AmpoolMaxinactiveage 600000 -rw- AmpoolMaxpoolsize 4096 -rw- AmpoolMinavailablesize 2 -rw- AmpoolMonitorsleepinterval 600000 -rw- AmpoolResetnontransactionalstate true -rw- AmpoolSessioncookiefactoryclass oracle.jbo.common.ampool.DefaultSessionCookieFactory -rw- AmpoolTimetolive 3600000 -rw- AmpoolWritecookietoclient false -r-- ConfigMBean true -rw- ConnectionPoolManager oracle.jbo.server.ConnectionPoolManagerImpl -rw- Doconnectionpooling false -rw- Dofailover false -rw- Initpoolsize 0 -rw- Maxpoolcookieage -1 -rw- Maxpoolsize 4096 -rw- Poolmaxavailablesize 25 -rw- Poolmaxinactiveage 600000 -rw- Poolminavailablesize 5 -rw- Poolmonitorsleepinterval 600000 -rw- Poolrequesttimeout 30000 -rw- Pooltimetolive -1 -r-- ReadOnly false -rw- Recyclethreshold 10 -r-- RestartNeeded false -r-- SystemMBean false -r-- eventProvider true -r-- eventTypes java.lang.String[jmx.attribute.change] -r-- objectName oracle.bc4j.mbean.config:name=AMPool,type=oracle.bc4j.mbean.config.AppModuleConfigType.AMPoolType,oracle.bc4j.mbean.config=oracle.demo.fmwdh.model.service.common.bc4j.xcfg,Application=FMWdh_application1,oracle.bc4j.mbean.config.AppModuleConfigType=DealHelpServiceDeployed -rw- poolClassName oracle.jbo.common.ampool.ApplicationPoolImpl Thanks to Brian Fry on the JDeveloper PM Team who did most of the work to put this sequence of steps together with me badgering him over his shoulder.

    Read the article

  • IOUG and Oracle Enterprise Manager User Community Twitter Chat and Sessions at OpenWorld

    - by Anand Akela
    Like last many years, we will have annual Oracle Users Forum on Sunday, September 30th, 2012 at Moscone West, Levels 2 & 3 . It will be open to all registered attendees of Oracle Open World and conferences running from September 29 to October 5, 2012 . This will be a great  opportunity to meet with colleagues, peers, and subject matter experts to share best practices, tips, and techniques around Oracle technologies. You could sit in on a special interest group (SIG) meeting or session and learn how to get more out of Oracle technologies and applications. IOUG and Oracle Enterprise Manager team invites you to join a Twitter Chat on Sunday, Sep. 30th from 11:30 AM to 12:30 PM.  IOUG leaders, Enterprise Manager SIG contributors and many Oracle Users Forum speakers will answer questions related to their experience with Oracle Enterprise Manager and the activities and resources available for  Enterprise Manager SIG members. You can participate in the chat using hash tag #em12c on Twitter.com or by going to  tweetchat.com/room/em12c      (Needs Twitter credential for participating).  Feel free to join IOUG and Enterprise team members at the User Group Pavilion on 2nd Floor, Moscone West. Here is the complete list of Oracle Enterprise Manager sessions during the Oracle Users Forum : Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Time Session Title Speakers Location 8:00AM - 8:45AM UGF4569 - Oracle RAC Migration with Oracle Automatic Storage Management and Oracle Enterprise Manager 12c VINOD Emmanuel -Database Engineering, Dell, Inc. Wendy Chen - Sr. Systems Engineer, Dell, Inc. Moscone West - 2011 8:00AM - 8:45AM UGF10389 -  Monitoring Storage Systems for Oracle Enterprise Manager 12c Anand Ranganathan - Product Manager, NetApp Moscone West - 2016 9:00AM - 10:00AM UGF2571 - Make Oracle Enterprise Manager Sing and Dance with the Command-Line Interface Ray Smith - Senior Database Administrator, Portland General Electric Moscone West - 2011 10:30AM - 11:30AM UGF2850 - Optimal Support: Oracle Enterprise Manager 12c Cloud Control, My Oracle Support, and More April Sims - DBA, Southern Utah University Moscone West - 2011 11:30AM - 12:30PM IOUG and Oracle Enterprise Manager Joint Tweet Chat  Join IOUG Leaders, IOUG's Enterprise Manager SIG Contributors and Speakers on Twitter and ask questions related to practitioner's experience with Oracle Enterprise Manager and the new IOUG 's Enterprise Manager SIG. To attend and participate in the chat, please use hash tag #em12c on twitter.com or your favorite Twitter client. You can also go to tweetchat.com/room/em12c to watch the conversation or login with your twitter credentials to ask questions. User Group Pavilion 2nd Floor, Moscone West 12:30PM-2:00PM UGF5131 - Migrating from Oracle Enterprise Manager 10g Grid Control to 12c Cloud Control    Leighton Nelson - Database Administrator, Mercy Moscone West - 2011 2:15PM-3:15PM UGF6511 -  Database Performance Tuning: Get the Best out of Oracle Enterprise Manager 12c Cloud Control Mike Ault - Oracle Guru, TEXAS MEMORY SYSTEMS INC Tariq Farooq - CEO/Founder, BrainSurface Moscone West - 2011 3:30PM-4:30PM UGF4556 - Will It Blend? Verifying Capacity in Server and Database Consolidations Jeremiah Wilton - Database Technology, Blue Gecko / DatAvail Moscone West - 2018 3:30PM-4:30PM UGF10400 - Oracle Enterprise Manager 12c: Monitoring, Metric Extensions, and Configuration Best Practices Kellyn Pot'Vin - Sr. Technical Consultant, Enkitec Moscone West - 2011 Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

    Read the article

  • apt-get install was interrupted

    - by user3475299
    I am new to Ubuntu. I got the following lines after an interrupted apt-get install. Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.13.0-29-generic /boot/vmlinuz-3.13.0-29-generic run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.13.0-29-generic /boot/vmlinuz-3.13.0-29-generic update-initramfs: Generating /boot/initrd.img-3.13.0-29-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.13.0-29-generic /boot/vmlinuz-3.13.0-29-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.13.0-29-generic /boot/vmlinuz-3.13.0-29-generic run-parts: executing /etc/kernel/postinst.d/zz-update-grub 3.13.0-29-generic /boot/vmlinuz-3.13.0-29-generic /usr/sbin/grub-mkconfig: 14: /etc/default/grub: nouveau.modeset=0: not found run-parts: /etc/kernel/postinst.d/zz-update-grub exited with return code 127 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.13.0-29-generic.postinst line 1025. No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already No apport report written because MaxReports is reached already dpkg: error processing package linux-image-3.13.0-29-generic (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of linux-image-extra-3.13.0-29-generic: linux-image-extra-3.13.0-29-generic depends on linux-image-3.13.0-29-generic; however: Package linux-image-3.13.0-29-generic is not configured yet. dpkg: error processing package linux-image-extra-3.13.0-29-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-image-generic: linux-image-generic depends on linux-image-3.13.0-29-generic; however: Package linux-image-3.13.0-29-generic is not configured yet. linux-image-generic depends on linux-image-extra-3.13.0-29-generic; however: Package linux-image-extra-3.13.0-29-generic is not configured yet. dpkg: error processing package linux-image-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.13.0.29.35); however: Package linux-image-generic is not configured yet. dpkg: error processing package linux-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-image-extra-3.13.0-27-generic: linux-image-extra-3.13.0-27-generic depends on linux-image-3.13.0-27-generic; however: Package linux-image-3.13.0-27-generic is not configured yet. dpkg: error processing package linux-image-extra-3.13.0-27-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-signed-image-3.13.0-29-generic: linux-signed-image-3.13.0-29-generic depends on linux-image-3.13.0-29-generic (= 3.13.0-29.53); however: Package linux-image-3.13.0-29-generic is not configured yet. linux-signed-image-3.13.0-29-generic depends on linux-image-extra-3.13.0-29-generic (= 3.13.0-29.53); however: Package linux-image-extra-3.13.0-29-generic is not configured yet. dpkg: error processing package linux-signed-image-3.13.0-29-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-signed-image-generic: linux-signed-image-generic depends on linux-signed-image-3.13.0-29-generic; however: Package linux-signed-image-3.13.0-29-generic is not configured yet. dpkg: error processing package linux-signed-image-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-signed-generic: linux-signed-generic depends on linux-signed-image-generic (= 3.13.0.29.35); however: Package linux-signed-image-generic is not configured yet. dpkg: error processing package linux-signed-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-signed-image-3.13.0-27-generic: linux-signed-image-3.13.0-27-generic depends on linux-image-3.13.0-27-generic (= 3.13.0-27.50); however: Package linux-image-3.13.0-27-generic is not configured yet. linux-signed-image-3.13.0-27-generic depends on linux-image-extra-3.13.0-27-generic (= 3.13.0-27.50); however: Package linux-image-extra-3.13.0-27-generic is not configured yet. dpkg: error processing package linux-signed-image-3.13.0-27-generic (--configure): dependency problems - leaving unconfigured Setting up libxkbcommon-x11-0:amd64 (0.4.1-0ubuntu1) ... Setting up libqt5gui5:amd64 (5.2.1+dfsg-1ubuntu14.2) ... Processing triggers for libc-bin (2.19-0ubuntu6) ... Errors were encountered while processing: linux-image-3.13.0-27-generic linux-image-3.13.0-29-generic linux-image-extra-3.13.0-29-generic linux-image-generic linux-generic linux-image-extra-3.13.0-27-generic linux-signed-image-3.13.0-29-generic linux-signed-image-generic linux-signed-generic linux-signed-image-3.13.0-27-generic E: Sub-process /usr/bin/dpkg returned an error code (1)

    Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >