Search Results

Search found 21248 results on 850 pages for 'network planning'.

Page 187/850 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

• 2 Computers, same network, different outgoing speeds when uploading to internet?

  - by user117339

  I have 2 work machines in my office, a PowerMac G5 and a MacBook Air. Both behind an IPCop firewall. The PowerMac is connected through a gigabit switch, the MacBook Air is connected through a Netgear 802.11g access point that is then plugged into the gigabit switch. There is also a FreeNAS box, both machines are able to read and write files to it at close to their pipe speeds. The main problem is when I am trying to upload files to the internet at large. The G5 is only hitting 0.1 - 0.25 Mbps. The Macbook is able to hit 2-3 Mbps. The setup (G5 / IPCop / Network) has been the same for 5 years. The issues with the internet speed started about 3 months ago. I hadn't tested on the Macbook at this point. I had complained to the ISP, they said their modem needed a firmware update, did that nothing changed. Reset IPCop, turned off squid, etc. No changes. The ISP switched the office over to a better plan with a theoretical 6 Mbps up, still no change. At this point I tried testing the Macbook, and lo and behold there's the speed. But why? I have tried changing out everything, cables, switches, using another ethernet port on the G5, wiping the system, using DHCP, using manual IPs, changing DNS servers, etc. Nothing works. I figured that if there was something horribly wrong with the network, then internally I would find a similar issue, but that is perfect. iperf, ping, etc show no dropped packets and near saturation of the internal network. I'm at a loss as to what the heck is going on. Any ideas would be appreciated! Below are some screenshots of speedtest.net: G5: Macbook Air:

  Read the article

• How to divide work to a network of computers?

  - by Morpork

  Imagine a scenario as follows: Lets say you have a central computer which generates a lot of data. This data must go through some processing, which unfortunately takes longer than to generate. In order for the processing to catch up with real time, we plug in more slave computers. Further, we must take into account the possibility of slaves dropping out of the network mid-job as well as additional slaves being added. The central computer should ensure that all jobs are finished to its satisfaction, and that jobs dropped by a slave are retasked to another. The main question is: What approach should I use to achieve this? But perhaps the following would help me arrive at an answer: Is there a name or design pattern to what I am trying to do? What domain of knowledge do I need to achieve the goal of getting these computers to talk to each other? (eg. will a database, which I have some knowledge of, be enough or will this involve sockets, which I have yet to have knowledge of?) Are there any examples of such a system? The main question is a bit general so it would be good to have a starting point/reference point. Note I am assuming constraints of c++ and windows so solutions pointing in that direction would be appreciated.

  Read the article

• Why does my computer not always automatically request a new DHCP lease when switching networks?

  - by KingJ

  I've noticed an interesting problem recently where my laptop will not automatically refresh my DHCP lease when changing between wireless networks. Instead, it will attempt to use the existing lease for the new network. Of course, since each network has different settings any connections will fail when using the old lease. While Windows will eventually request a new DHCP lease, it's often much faster for me to release the old lease and request a new, correct, lease. It puzzles me as to why this is not automatically done when associating to the network? One possible cause is that the laptop is put to sleep while connected to one network, then woken when in range of the other network. Nevertheless, I would expect that the lease would be renewed when the laptop associates to the other network rather than attempting to use the old lease. It should be noted that the two networks are completely different, both in terms of size, number of APs, network settings, SSIDs etc. One network is my home network and the other one is the campus-wide network at my University.

  Read the article

• How to protect folder privacy against unethical network administrators? [closed]

  - by Trevor Trovalds

  I just need a technical solution for the sake of my group's shared passwords, projects, works, etc. safety. Our network has Active Directory with public/groups/users and NTFS permissions, under a Windows Server 2003 which will soon migrate to Windows Server 2008 R2. Our IT crowd is small, consisting of 2 DBAs, 4 designers, 6 developers (including me), 2 netadmins and (a lot of) tech supporters, everyone has local admin rights. Those 2 network admins weren't the ones who set the network up, they just took the lift recently when the previous ones quit. We usually find them laughing at private contents from users stored in the groups AD, sabotaging documents that don't match their personal tastes and, finally, this week we found out they stole a project we (developers and DBAs) were finishing and, long before, they presented it to the CEO as theirs without us knowing. I'm a systems analyst, and initially my group decided to store critical content, like shared passwords, inside encrypted .zip files. Unfortunately we couldn't do the same to the other hundreds of folders and files, which included the stolen project, because the zipping process would take too long for every update. We also tried an encrypted Subversion repository under SSL, but there are many dummies (~38 atm) involved in the projects that have trouble using TortoiseSVN when contributing, and very oftenly we had to fix messed up updates. Well, I think these two give the idea of what we've been trying to reach. So, is there a practical "individual" protection for our extensive data or my hope can already be euthanized? P.S.: Seriously, at the place where I live/work, political corruption gone the wildest, so denounce related options are likely impracticable. Yet both netadmins have strong "political bond" with the CEO and the President, hence their lousy behavior and our failed delation attempts.

  Read the article

• Ubuntu Wireless not working on Lenovo t400

  - by VmaxBoss

  This problem started after upgrading to 12.04, an my system is 'up2date' Have tried most of the solution-proposals found on the net. lspci -nnk | grep -iA2 net 00:19.0 Ethernet controller [0200]: Intel Corporation 82567LF Gigabit Network Connection [8086:10bf] (rev 03) Subsystem: Lenovo Device [17aa:20ee] Kernel driver in use: e1000e 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237] Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211] Kernel driver in use: iwlagn iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11abgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off sudo lshw -C network *-network description: Ethernet interface product: 82567LF Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 03 serial: 00:22:68:1a:c4:75 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=1.0.2-k2 duplex=full firmware=1.8-3 ip=192.168.2.154 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:29 memory:fc000000-fc01ffff memory:fc024000-fc024fff ioport:1820(size=32) *-network DISABLED description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:26:c6:6c:2d:24 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn latency=0 multicast=yes wireless=IEEE 802.11abgn resources: irq:30 memory:f4300000-f4301fff Please help Br/VB

  Read the article

• Software Architecture: How to divide work to a network of computers?

  - by Morpork

  Imagine a scenario as follows: Lets say you have a central computer which generates a lot of data. This data must go through some processing, which unfortunately takes longer than to generate. In order for the processing to catch up with real time, we plug in more slave computers. Further, we must take into account the possibility of slaves dropping out of the network mid-job as well as additional slaves being added. The central computer should ensure that all jobs are finished to its satisfaction, and that jobs dropped by a slave are retasked to another. The main question is: What approach should I use to achieve this? But perhaps the following would help me arrive at an answer: Is there a name or design pattern to what I am trying to do? What domain of knowledge do I need to achieve the goal of getting these computers to talk to each other? (eg. will a database, which I have some knowledge of, be enough or will this involve sockets, which I have yet to have knowledge of?) Are there any examples of such a system? The main question is a bit general so it would be good to have a starting point/reference point. Note I am assuming constraints of c++ and windows so solutions pointing in that direction would be appreciated.

  Read the article

• How to join a Windows Domain and Map Network Drives?

  - by AgainstClint

  I just installed the current build for Ubuntu on a partition for my work computer. I am a novice when it comes to Linux/Ubuntu, which is why I installed it along side windows. I want to learn how to operate and use Ubuntu much more than I do now, so I figured installing it and trying to do day to day functions here would be a "Thrown into the pool with sharks" way to do it, and I like that way. I did however have a few questions: We are on a Domain in Windows, is there any way to join that domain using the Ubuntu partition? We Also have 16 mapped network drives. I don't actually need ALL of them mapped for Ubuntu, but is there a way to Map at least one of them to see/use here in Ubuntu. Outlook Corporate email, how can I sign in/use it while...well, you get the idea. As I said earlier, I am VERY new to Ubuntu, i've only played around with it a bit at home and never at the office. If you could simplify it down for me a bit, that would be great.

  Read the article

• BI&EPM in Focus June 2014

  - by Mike.Hallett(at)Oracle-BI&EPM

  Applications Webcast Centre – A Library of Discussion and Research for Best Practice: Achieving Reliable Planning, Budgeting and Forecasting Talent Analytics and Big Data – Is HR ready for the challenge Enterprise Data – The cost of non-quality Customers Josephine Niemiec from ADP talks about Oracle Hyperion Workforce Planning at Collaborate 2014 (link) Video Chris Nelms from Ameren talks about Oracle BI Spend and Procurement Analytics at Collaborate 2014 (link) Video Leggett & Platt Leverages Oracle Hyperion EPM and Demantra (link) Video Pella Corporation Accelerates Close Cycle by Cutting Time for Financial Consolidation from Three Days to Less Than One Day (link) Secretaría General de Administración de Justicia en España Enhances Citizen Services with Near-Real-Time Business Intelligence Gleaned from 500 Databases  (link) Bellco Credit Union Speeds Budget Development by 30%—Gains Insight into Specific Branch and Financial Product Profitability  (link)  Video QDQ media Speeds up Financial Reporting by 24x, Gains Business Agility, and Integrates Seamlessly into Corporate Accounting System  (link) Westfield Group Maximizes Shopping Mall Revenue, Shortens Year-End Financial Consolidation by 75%  (link)  IL&FS Transportation Networks Shortens Financial Consolidation and Reporting Cycle by Eight Days, Gains In-Depth Insight into Business Performance   (link) Angel Trains Optimizes Rail Operations for Purchasing, Sourcing, and Project Management to Meet Challenges of Evolving Rail Industry  (link) Enterprise Performance Management June 11, at Oracle Utrecht, NL: Morning session: Explore Planning and Budgeting in the Cloud (link) June 12, London: PureApps Presents: Best Practice Financial Consolidation and Reporting Workshop (link) July 3, Koln: Oracle Hyperion Business Analytics Roundtable (link) Blog: What's Your Tax Strategy? Automate the Operational Transfer Pricing Process (link) YouTube Video: Automate Tax Reporting with Oracle Hyperion Tax Provision (link) YouTube Video: Introducing Oracle Hyperion Planning’s Tablet Optimized Interface (link) OracleEPMWebcasts @ YouTube (link) Partner webcasts: Wednesday, 4 June, 5.00 GMT - Case Study:  Lessons Learned from Edgewater Ranzal's Internal Implementation of Oracle Planning & Budgeting Cloud Service (PBCS) - Learn more and register here! Thursday, 5 June, 4.00 GMT - Achieving Accountable Care Using Oracle Technology - Learn more and register here! Tuesday, 17 June, 4.00 GMT - Optimizing Performance for Oracle EPM Systems - Learn more and register here! Oracle University Blog: The Coolest Features Available with Oracle Hyperion 11.1.2.3 – Training from OU to help you to best use them (link) Support: Proactive Support: EPM Hyperion Planning 11.1.2.3.500 Using RMI Service [Blog] Proactive Support: Planning and Budgeting Cloud Service Videos (link) Planning and Budgeting Cloud Service (PBCS) 11.1.2.3.410 Patch Bundle [Doc ID 1670981.1] Hyperion Analytic Provider Services 11.1.2.2.106 Patch Set Update [Doc ID 1667350.1] Hyperion Essbase 11.1.2.2.106 Patch Set Update [Doc ID 1667346.1] Hyperion Essbase Administration Services 11.1.2.2.106 Patch Set Update [Doc ID 1667348.1] Hyperion Essbase Studio 11.1.2.2.106 Patch Set Update [Doc ID 1667329.1] Hyperion Smart View 11.1.2.5.210 Patch Set Update [Doc ID 1669427.1] Using HPCM, HSF or DRM Communities (link) Business Intelligence June 12, Birmingham, UK: Oracle Big Data at Work - Use Cases and Architecture (link) June 17, London: Oracle at Cloud & Big Data World Forums (link) June 17, Partner Webcast: Transform your Planning Capabilities with Peloton's CloudAccelerator for Oracle PBCS (link) June 19, London: Oracle at the Whitehall Media Big Data Analytics Conference and Exhibition (link) June 19, London: Partner Event - Agile BI Conference by Peak Indicators [link] June 25, Munich: Oracle Special Day auf der TDWI 2014 Konferenz (link) July 15, London: Oracle Endeca Information Discovery Workshop (link) July 16, London: BI Applications Workshop – Financial Analytics & Procurement Analytics (link) July 17, London: BI Applications Workshop – HR Analytics (link) Milan, Italy: L’Osservatorio Big Data Analytics & Business Intelligence with Politecnico di Milano (link) OBIA 11.1.1.8.1 - Now Available [Blog] What’s New in OBIA 11.1.1.8.1 [Blog] BI Blog: A closer look at Oracle BI Applications 11.1.1.8.1 release (link) Press Release: BI Applications Deliver Greater Insight into Talent and Procurement (link) Support Blog: OBIA 11.1.1.8.1 Upgrade Guide & Documentation (link) YouTube Video: Glenn Hoormann of Ludus talks to us about Oracle Business Intelligence and ERP at Collaborate 2014 (Link) YouTube Video: Performance Architects talks about key BI and Mobile trends, including Endeca at Collaborate 2014 (link) Big Data Blog: 3 Keys for Using Big Data Effectively for Enhanced Customer Experience (link) Big Data Lite Demo VM 3.0 Now Available on OTN BI Blog: Data Relationship Governance - Workflow in a Bottle (link) MDM Blog: Register for Product Data Management Weekly Cloudcasts (link) MDM Blog: Improve your Customer Experience with High Quality Information (link) MDM Blog: Big Data Challenges & Considerations (link) Oracle University: Oracle BI Applications 11g: Implementation using ODI (link) Proactive Support: Monthly Index [Blog] My Oracle Support: Partner Accreditation for Business Analytics Support [Blog] OBIEE 11g Test-to-Production (T2P) / Clone Procedures Guide [Blog] Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Problem with between join for sqlalchemy orm relation.

  - by Gary van der Merwe

  I'm trying to create a relation that has a between join. Here is a shortish example of what I'm trying to do: #!/usr/bin/env python import sqlalchemy as sa from sqlalchemy import orm from sqlalchemy.engine.base import Engine from sqlalchemy.ext.declarative import declarative_base metadata = sa.MetaData() Base = declarative_base(metadata=metadata) engine = sa.create_engine('sqlite:///:memory:') class Network(Base): __tablename__ = "network" id = sa.Column(sa.Integer, primary_key=True) ip_net_addr_db = sa.Column('ip_net_addr', sa.Integer, index=True) ip_broadcast_addr_db = sa.Column('ip_broadcast_addr', sa.Integer, index=True) # This can be determined from the net address and the net mask, but we store # it in the db so that we can join with the address table. ip_net_mask_len = sa.Column(sa.SmallInteger) class Address(Base): __tablename__ = "address" ip_addr_db = sa.Column('ip_addr', sa.Integer, primary_key=True, index=True, unique=True) Network.addresses = orm.relation(Address, primaryjoin=Address.ip_addr_db.between( Network.ip_net_addr_db, Network.ip_broadcast_addr_db), foreign_keys=[Address.ip_addr_db]) metadata.create_all(engine) Session = orm.sessionmaker(bind=engine) Network() I you run this, you get this error: ArgumentError: Could not determine relation direction for primaryjoin condition 'address.ip_addr BETWEEN network.ip_net_addr AND network.ip_broadcast_addr', on relation Network.addresses. Do the columns in 'foreign_keys' represent only the 'foreign' columns in this join condition ? The answer to that question is Yes, but I cant figure out how to tell it that

  Read the article

• June Oracle Technology Network NEW Member Benefits - books books and more books!!!

  - by Cassandra Clark

  As we mentioned a few posts ago we are working to bring Oracle Technology Network members NEW benefits each month. Listed below are several discounts on technology books brought to you by Apress, Pearson, CRC Press and Packt Publishing. Happy reading!!! Apress Offers - Get 50% off the eBook below using promo code ORACLEJUNEJCCF. Pro ODP.NET for Oracle Database 11g By Edmund T. Zehoo This book is a comprehensive and easy-to-understand guide for using the Oracle Data Provider (ODP) version 11g on the .NET Framework. It also outlines the core GoF (Gang of Four) design patterns and coding techniques employed to build and deploy high-impact mission-critical applications using advanced Oracle database features through the ODP.NET provider. Pearson Offers - Get 35% off all titles listed below using code OTNMEMBER. SOA Design Patterns | Thomas Earl | ISBN: 0136135161 In cooperation with experts and practitioners throughout the SOA community, best-selling author Thomas Erl brings together the de facto catalog of design patterns for SOA and service-orientation. Oracle Performance Survival Guide | Guy Harrison | ISBN: 9780137011957 The fast, complete, start-to-finish guide to optimizing Oracle performance. Core JavaServer Faces, Third Edition | David Geary and Cay S. Horstmann | ISBN: 9780137012893 Provides everything you need to master the powerful and time-saving features of JSF 2.0? Solaris Security Essentials | ISBN: 9780137012336 A superb guide to deploying and managing secure computer environments.? Effective C#, Second Edition | Bill Wagner | ISBN: 9780321658708 Respected .NET expert Bill Wagner identifies fifty ways you can leverage the full power of the C# 4.0 language to express your designs concisely and clearly. CRC Press Offers - Use 813DA to get 20% off this the title below. Secure and Resilient Software Development This book illustrates all phases of the secure software development life cycle. It details quality software development strategies that stress resilience requirements with precise, actionable, and ground-level inputs. Packt Publishing Offers - Use the promo code "Java35June", to save 35% off of each eBook mentioned below. JSF 2.0 Cookbook By Anghel Leonard ISBN: 978-1-847199-52-2 Packed with fast, practical solutions and techniques for JavaServer Faces developers who want to push past the JSF basics. JavaFX 1.2 Application Development Cookbook By Vladimir Vivien ISBN: 978-1-847198-94-5 Fast, practical solutions and techniques for building powerful, responsive Rich Internet Applications in JavaFX.

  Read the article

• Easy Made Easier - Networking

  - by dragonfly

      In my last post, I highlighted the feature of the Appliance Manager Configurator to auto-fill some fields based on previous field values, including host names based on System Name and sequential IP addresses from the first IP address entered. This can make configuration a little faster and a little less subject to data entry errors, particularly if you are doing the configuration on the Oracle Database Appliance itself.     The Oracle Database Appliance Appliance Manager Configurator is available for download here. But why would you download it, if it comes pre-installed on the Oracle Database Appliance? A common reason for customers interested in this new Engineered System is to get a good idea of how easy it is to configure. Beyond that, you can save the resulting configuration as a file, and use it on an Oracle Database Appliance. This allows you to verify the data entered in advance, and in the comfort of your office. In addition, the topic of this post is another strong reason to download and use the Appliance Manager Configurator prior to deploying your Oracle Database Appliance.     The most common source of hiccups in deploying an Oracle Database Appliance, based on my experiences with a variety of customers, involves the network configuration. It is during Step 11, when network validation occurs, that these come to light, which is almost half way through the 24 total steps, and can be frustrating, whether it was a typo, DNS mis-configuration or IP address already in use. This is why I recommend as a best practice taking advantage of the Appliance Manager Configurator prior to deploying an Oracle Database Appliance.     Why? Not only do you get the benefit of being able to double check your entries before you even start on the Oracle Database Appliance, you can also take advantage of the Network Validation step. This is the final step before you review all the data and can save it to a text file. It can be skipped, if you aren't ready or are not connected to the network that the Oracle Database Appliance will be on. My recommendation, though, is to run the Appliance Manager Configurator on your laptop, enter the data or re-load a previously saved file of the data, and then connect to the network that the Oracle Database Appliance will be on. Now run the Network Validation. It will check to make sure that the host names you entered are in DNS and do resolve to the IP addresses you specifiied. It will also ping the IP Addresses you specified, so that you can verify that no other machine is already using them (yes, that has happened at customer sites).     After you have completed the validation, as seen in the screen shot below, you can review the results and move on to saving your settings to a file for use on your Oracle Database Appliance, or if there are errors, you can use the Back button to return to the appropriate screen and correct the data. Once you are satisfied with the Network Validation, just check the Skip/Ignore Network Validation checkbox at the top of the screen, then click Next. Is the Network Validation in the Appliance Manager Configurator required? No, but it can save you time later. I should also note that the Network Validation screen is not part of the Appliance Manager Configurator that currently ships on the Oracle Database Appliance, so this is the easiest way to verify your network configuration.     I hope you are finding this series of posts useful. My next post will cover some aspects of the windowing environment that gets run by the 'startx' command on the Oracle Database Appliance, since this is needed to run the Appliance Manager Configurator via a direct connected monitor, keyboard and mouse, or via the ILOM. If it's been a while since you've used an OpenWindows environment, you'll want to check it out.

  Read the article

• How to keep a data structure synchronized over a network?

  - by David Gouveia

  Context In the game I'm working on (a sort of a point and click graphic adventure), pretty much everything that happens in the game world is controlled by an action manager that is structured a bit like: So for instance if the result of examining an object should make the character say hello, walk a bit and then sit down, I simply spawn the following code: var actionGroup = actionManager.CreateGroup(); actionGroup.Add(new TalkAction("Guybrush", "Hello there!"); actionGroup.Add(new WalkAction("Guybrush", new Vector2(300, 300)); actionGroup.Add(new SetAnimationAction("Guybrush", "Sit")); This creates a new action group (an entire line in the image above) and adds it to the manager. All of the groups are executed in parallel, but actions within each group are chained together so that the second one only starts after the first one finishes. When the last action in a group finishes, the group is destroyed. Problem Now I need to replicate this information across a network, so that in a multiplayer session, all players see the same thing. Serializing the individual actions is not the problem. But I'm an absolute beginner when it comes to networking and I have a few questions. I think for the sake of simplicity in this discussion we can abstract the action manager component to being simply: var actionManager = new List<List<string>>(); How should I proceed to keep the contents of the above data structure syncronized between all players? Besides the core question, I'm also having a few other concerns related to it (i.e. all possible implications of the same problem above): If I use a server/client architecture (with one of the players acting as both a server and a client), and one of the clients has spawned a group of actions, should he add them directly to the manager, or only send a request to the server, which in turn will order every client to add that group? What about packet losses and the like? The game is deterministic, but I'm thinking that any discrepancy in the sequence of actions executed in a client could lead to inconsistent states of the world. How do I safeguard against that sort of problem? What if I add too many actions at once, won't that cause problems for the connection? Any way to alleviate that?

  Read the article

• How to synchronize the ball in a network pong game?

  - by Thaars

  I’m developing a multiplayer network pong game, my first game ever. The current state is, I’ve running the physic engine with the same configurations on the server and the clients. The own paddle movement is predicted and get just confirmed by the authoritative server. Is a difference detected between them, I correct the position at the client by interpolation. The opponent paddle is also interpolated 200ms to 100ms in the past, because the server is broadcasting snapshots every 100ms to each client. So far it works very well, but now I have to simulate the ball and have a problem to understanding the procedure. I’ve read Valve’s (and many other) articles about fast-paced multiplayer several times and understood their approach. Maybe I can compare my ball with their bullets, but their advantage is, the bullets are not visible. When I have to display the ball, and see my paddle in the present, the opponent in the past and the server is somewhere between it, how can I synchronize the ball over all instances and ensure, that it got ever hit by the paddle even if the paddle is fast moving? Currently my ball’s position is simply set by a server update, so it can happen, that the ball bounces back, even if the paddle is some pixel away (because of a delayed server position). Until now I’ve got no synced clock over all instances. I’m sending a client step index with each update to the server. If the server did his job, he sends the snapshot with the last step index of each client back to the clients. Now I’m looking for the stored position at the returned step index and compare them. Do I need a common clock to sync the ball? EDIT: I've tried to sync a common clock for the server and all clients with a timestamp. But I think it's better to use an own stepping instead of a timestamp (so I don't need to calculate with the ping and so on - and the timestamp will never be exact). The physics are running 60 times per second and now I use this for keeping them synchronized. Is that a good way? When the ball gets calculated by each client, the angle after bouncing can differ because of the different position of the paddles (the opponent is 200ms in the past). When the server is sending his ball position, velocity and angle (because he knows the position of each paddle and is authoritative), the ball could be in a very different position because of the different angles after bouncing (because the clients receive the server data after 100ms). How is it possible to interpolate such a huge difference? I posted this question some days ago at stackoverflow, but got no answer yet. Maybe this is the better place for this question.

  Read the article

• How to configure VPN in Windows XP

  - by SAMIR BHOGAYTA

  VPN Overview A VPN is a private network created over a public one. It’s done with encryption, this way, your data is encapsulated and secure in transit – this creates the ‘virtual’ tunnel. A VPN is a method of connecting to a private network by a public network like the Internet. An internet connection in a company is common. An Internet connection in a Home is common too. With both of these, you could create an encrypted tunnel between them and pass traffic, safely - securely. If you want to create a VPN connection you will have to use encryption to make sure that others cannot intercept the data in transit while traversing the Internet. Windows XP provides a certain level of security by using Point-to-Point Tunneling Protocol (PPTP) or Layer Two Tunneling Protocol (L2TP). They are both considered tunneling protocols – simply because they create that virtual tunnel just discussed, by applying encryption. Configure a VPN with XP If you want to configure a VPN connection from a Windows XP client computer you only need what comes with the Operating System itself, it's all built right in. To set up a connection to a VPN, do the following: 1. On the computer that is running Windows XP, confirm that the connection to the Internet is correctly configured. • You can try to browse the internet • Ping a known host on the Internet, like yahoo.com, something that isn’t blocking ICMP 2. Click Start, and then click Control Panel. 3. In Control Panel, double click Network Connections 4. Click Create a new connection in the Network Tasks task pad 5. In the Network Connection Wizard, click Next. 6. Click Connect to the network at my workplace, and then click Next. 7. Click Virtual Private Network connection, and then click Next. 8. If you are prompted, you need to select whether you will use a dialup connection or if you have a dedicated connection to the Internet either via Cable, DSL, T1, Satellite, etc. Click Next. 9. Type a host name, IP or any other description you would like to appear in the Network Connections area. You can change this later if you want. Click Next. 10. Type the host name or the Internet Protocol (IP) address of the computer that you want to connect to, and then click Next. 11. You may be asked if you want to use a Smart Card or not. 12. You are just about done, the rest of the screens just verify your connection, click Next. 13. Click to select the Add a shortcut to this connection to my desktop check box if you want one, if not, then leave it unchecked and click finish. 14. You are now done making your connection, but by default, it may try to connect. You can either try the connection now if you know its valid, if not, then just close it down for now. 15. In the Network Connections window, right-click the new connection and select properties. Let’s take a look at how you can customize this connection before it’s used. 16. The first tab you will see if the General Tab. This only covers the name of the connection, which you can also rename from the Network Connection dialog box by right clicking the connection and selecting to rename it. You can also configure a First connect, which means that Windows can connect the public network (like the Internet) before starting to attempt the ‘VPN’ connection. This is a perfect example as to when you would have configured the dialup connection; this would have been the first thing that you would have to do. It's simple, you have to be connected to the Internet first before you can encrypt and send data over it. This setting makes sure that this is a reality for you. 17. The next tab is the Options Tab. It is The Options tab has a lot you can configure in it. For one, you have the option to connect to a Windows Domain, if you select this check box (unchecked by default), then your VPN client will request Windows logon domain information while starting to work up the VPN connection. Also, you have options here for redialing. Redial attempts are configured here if you are using a dial up connection to get to the Internet. It is very handy to redial if the line is dropped as dropped lines are very common. 18. The next tab is the Security Tab. This is where you would configure basic security for the VPN client. This is where you would set any advanced IPSec configurations other security protocols as well as requiring encryption and credentials. 19. The next tab is the Networking Tab. This is where you can select what networking items are used by this VPN connection. 20. The Last tab is the Advanced Tab. This is where you can configure options for configuring a firewall, and/or sharing. Connecting to Corporate Now that you have your XP VPN client all set up and ready, the next step is to attempt a connection to the Remote Access or VPN server set up at the corporate office. To use the connection follow these simple steps. To open the client again, go back to the Network Connections dialog box. 1. One you are in the Network Connection dialog box, double-click, or right click and select ‘Connect’ from the menu – this will initiate the connection to the corporate office. 2. Type your user name and password, and then click Connect. Properties bring you back to what we just discussed in this article, all the global settings for the VPN client you are using. 3. To disconnect from a VPN connection, right-click the icon for the connection, and then click “Disconnect” Summary In this article we covered the basics of building a VPN connection using Windows XP. This is very handy when you have a VPN device but don’t have the ‘client’ that may come with it. If the VPN Server doesn’t use highly proprietary protocols, then you can use the XP client to connect with. In a future article I will get into the nuts and bolts of both IPSec and more detail on how to configure the advanced options in the Security tab of this client. 678: The remote computer did not respond. 930: The authentication server did not respond to authentication requests in a timely fashion. 800: Unable to establish the VPN connection. 623: The system could not find the phone book entry for this connection. 720: A connection to the remote computer could not be established. More on : http://www.windowsecurity.com/articles/Configure-VPN-Connection-Windows-XP.html

  Read the article

• Are there any downsides in using C++ for network daemons?

  - by badcat

  Hey guys! I've been writing a number of network daemons in different languages over the past years, and now I'm about to start a new project which requires a new custom implementation of a properitary network protocol. The said protocol is pretty simple - some basic JSON formatted messages which are transmitted in some basic frame wrapping to have clients know that a message arrived completely and is ready to be parsed. The daemon will need to handle a number of connections (about 200 at the same time) and do some management of them and pass messages along, like in a chat room. In the past I've been using mostly C++ to write my daemons. Often with the Qt4 framework (the network parts, not the GUI parts!), because that's what I also used for the rest of the projects and it was simple to do and very portable. This usually worked just fine, and I didn't have much trouble. Being a Linux administrator for a good while now, I noticed that most of the network daemons in the wild are written in plain C (of course some are written in other languages, too, but I get the feeling that 80% of the daemons are written in plain C). Now I wonder why that is. Is this due to a pure historic UNIX background (like KISS) or for plain portability or reduction of bloat? What are the reasons to not use C++ or any "higher level" languages for things like daemons? Thanks in advance! Update 1: For me using C++ usually is more convenient because of the fact that I have objects which have getter and setter methods and such. Plain C's "context" objects can be a real pain at some point - especially when you are used to object oriented programming. Yes, I'm aware that C++ is a superset of C, and that C code is basically C++. But that's not the point. ;)

  Read the article

• [C# Thread] I'd like access to a share on the network!

  - by JustLooking

  Some Details I am working with VisualWebGUI, so this app is like ASP.NET, and it is deployed on IIS 7 (for testing) For my 'Web Site', Anonymous Authentication is set to a specific user (DomainName\DomainUser). In my web.config, I have impersonation on. This is how I got my app to access the share in the first place. The Problem There is a point in the the app where we use the Thread class, something similar to: Thread myThread = new Thread(new ThreadStart(objInstance.PublicMethod)); myThread.Start(); What I have noticed is that I can write to my logs (text file on the share), everywhere throughout my code, except in the thread that I kicked off. I added some debugging output and what I see for users is: The thread that's kicked off: NT AUTHORITY\NETWORK SERVICE Everywhere else in my code: DomainName\DomainUser (described in my IIS setup) OK, for some reason the thread gets a different user (NETWORK SERVICE). Fine. But, my share (and the actual log file) was given 'Full Control' to the NETWORK SERVICE user (this share resides on a different server than the one that my app is running). If NETWORK SERVICE has rights to this folder, why do I get access denied? Or is there a way to have the thread I kick off have the same user as the process?

  Read the article

• IIS7 Network Bios command limit and disabling file change notifications.

  - by meandmycode

  Having experienced IIS for many years I've hit this error various times in the past, and understand it, the gist being IIS is attempting to setup so many file change notifications over a UNC share that it is hitting a specified limit of active commands. However, whilst I understand this is a registry change on the endpoints, in our internal network we're starting to hit this when running certain domains that have large content (and the content is then stored out of source control and instead on a dumb network store). Given this is a testing environment and rather than changing registry settings (which may not even work for client (dev) machines that run Vista IIS), I'd like to stop IIS setting up all these file change notifications. Is this possible to do on a per site basis? additionally the configuration can't be in the web.config, if this means having to disable FCN's for the entire IIS server this would be preferred. Thanks in advance.

  Read the article

• network is not available even when cisco vpn client is connected. wrong route?

  - by javapowered

  I'm using Vodafone 3G modem. I've disabled other network devices in the system (ethernet, wifi, wimax) turned off firewall and antivirus. cisco vpn client connects successfully but I still can not access computer 192.168.147.120 (as well as any other computer from network). Any suggestions are welcome as I don't know what to do. ipconfig /all and route print commands (translated to english): Microsoft Windows [Version 6.1.7601] (C) Microsoft Corporation (Microsoft Corp.), 2009. All rights reserved. C: \ Users \ Oleg> ipconfig / all IP Configuration for Windows The name of the computer. . . . . . . . . : OlegPC The primary DNS-suffix. . . . . . : Node Type. . . . . . . . . . . . . : Hybrid IP-routing is enabled. . . . : No WINS-proxy enabled. . . . . . . : No Ethernet adapter Local Area Connection 4: DNS-suffix for this connection. . . . . : Description. . . . . . . . . . . . . : Cisco Systems VPN Adapter Physical Address. . . . . . . . . 00-05-9A-3C-78-00 DHCP is enabled. . . . . . . . . . . : No Autoconfiguration Enabled. . . . . . : Yes Local IPv6-address channel. . . : Fe80:: c073: 41b2: 852f: eb87% 26 (Preferred) IPv4-address. . . . . . . . . . . . : 10.53.127.204 (Preferred) The subnet mask. . . . . . . . . . : 255.0.0.0 Default Gateway. . . . . . . . . : IAID DHCPv6. . . . . . . . . . . : 536872346 DUID the client DHCPv6. . . . . . . 00-01-00-01-14-6F-4C-8D-60-EB-69-85-10-2D DNS-servers. . . . . . . . . . . : Fec0: 0:0: ffff:: 1% 1 fec0: 0:0: ffff:: 2% 1 fec0: 0:0: ffff:: 3% 1 NetBios over TCP / IP. . . . . . . . : Disabled Adapter mobile broadband connection through a broadband adapter mobile communications: DNS-suffix for this connection. . . . . : Description. . . . . . . . . . . . . : Vodafone Mobile Broadband Network Adapter (Huawei) Physical Address. . . . . . . . . 58-2C-80-13-92-63 DHCP is enabled. . . . . . . . . . . : No Autoconfiguration Enabled. . . . . . : Yes IPv4-address. . . . . . . . . . . . : 10.229.227.77 (Preferred) The subnet mask. . . . . . . . . . : 255.255.255.252 Default Gateway. . . . . . . . . : 10.229.227.78 DNS-servers. . . . . . . . . . . : 163.121.128.134 212.103.160.18 NetBios over TCP / IP. . . . . . . . : Disabled Tunnel adapter isatap. {737FF02E-D473-4F91-840E-2A4DD293FC12}: State of the environment. . . . . . . . : DNS Suffix. DNS-suffix for this connection. . . . . : Description. . . . . . . . . . . . . : Adapter Microsoft ISATAP # 3 Physical Address. . . . . . . . . 00-00-00-00-00-00-00-E0 DHCP is enabled. . . . . . . . . . . : No Autoconfiguration Enabled. . . . . . : Yes Tunnel adapter isatap. {EF585226-5B07-4446-A5A4-CB1B8E4B13AC}: State of the environment. . . . . . . . : DNS Suffix. DNS-suffix for this connection. . . . . : Description. . . . . . . . . . . . . : Adapter Microsoft ISATAP # 4 Physical Address. . . . . . . . . 00-00-00-00-00-00-00-E0 DHCP is enabled. . . . . . . . . . . : No Autoconfiguration Enabled. . . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: DNS-suffix for this connection. . . . . : Description. . . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . 00-00-00-00-00-00-00-E0 DHCP is enabled. . . . . . . . . . . : No Autoconfiguration Enabled. . . . . . : Yes IPv6-address. . . . . . . . . . . . : 2001:0:4137:9 e76: ea: b77: f51a: 1cb2 (Basically d) Local IPv6-address channel. . . : Fe80:: ea: b77: f51a: 1cb2% 16 (Preferred) Default Gateway. . . . . . . . . ::: NetBios over TCP / IP. . . . . . . . : Disabled C: \ Users \ Oleg> route print ================================================== ========================= List of interfaces 26 ... 00 05 9a 3c 78 00 ...... Cisco Systems VPN Adapter 23 ... 58 2c 80 13 92 63 ...... Vodafone Mobile Broadband Network Adapter (Huawei) 1 ........................... Software Loopback Interface 1 19 ... 00 00 00 00 00 00 00 e0 Adapter Microsoft ISATAP # 3 20 ... 00 00 00 00 00 00 00 e0 Adapter Microsoft ISATAP # 4 16 ... 00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface ================================================== ========================= IPv4 Route Table ================================================== ========================= Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.229.227.78 10.229.227.77 296 10.0.0.0 255.0.0.0 On-link 10.53.127.204 286 10.6.93.21 255,255,255,255 10.0.0.1 10.53.127.204 100 10.13.50.12 255,255,255,255 10.0.0.1 10.53.127.204 100 10.53.8.0 255.255.252.0 10.0.0.1 10.53.127.204 100 10.53.127.204 255.255.255.255 On-link 10.53.127.204 286 10.53.128.0 255.255.248.0 10.0.0.1 10.53.127.204 100 10.53.148.0 255,255,255,240 10.0.0.1 10.53.127.204 100 10.53.148.16 255,255,255,240 10.0.0.1 10.53.127.204 100 10.229.227.76 255.255.255.252 On-link 10.229.227.77 296 10.229.227.77 255.255.255.255 On-link 10.229.227.77 296 10.229.227.79 255.255.255.255 On-link 10.229.227.77 296 10.255.255.255 255.255.255.255 On-link 10.53.127.204 286 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.147.0 255,255,255,240 10.0.0.1 10.53.127.204 100 192.168.147.96 255,255,255,240 10.0.0.1 10.53.127.204 100 192,168,147,112 255,255,255,240 10.0.0.1 10.53.127.204 100 192,168,147,128 255,255,255,240 10.0.0.1 10.53.127.204 100 192,168,147,144 255,255,255,240 10.0.0.1 10.53.127.204 100 192,168,147,224 255,255,255,240 10.0.0.1 10.53.127.204 100 192.168.214.0 255.255.255.0 10.0.0.1 10.53.127.204 100 192.168.215.0 255.255.255.0 10.0.0.1 10.53.127.204 100 194.247.133.19 255,255,255,255 10.0.0.1 10.53.127.204 100 213,247,231,194 255,255,255,255 10.229.227.78 10.229.227.77 100 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.229.227.77 296 224.0.0.0 240.0.0.0 On-link 10.53.127.204 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.229.227.77 296 255.255.255.255 255.255.255.255 On-link 10.53.127.204 286 ================================================== ========================= Persistent Routes: None IPv6 Route Table ================================================== ========================= Active Routes: If Metric Network Destination Gateway 16 58:: / 0 On-link 1306:: 1 / 128 On-link 16 58 2001:: / 32 On-link 16 306 2001: 0:4137:9 e76: ea: b77: f51a: 1cb2/128 On-link 16 306 fe80:: / 64 On-link 26 286 fe80:: / 64 On-link 16 306 fe80:: ea: b77: f51a: 1cb2/128 On-link 26 286 fe80:: c073: 41b2: 852f: eb87/128 On-link 1306 ff00:: / 8 On-link 16 306 ff00:: / 8 On-link 26 286 ff00:: / 8 On-link ================================================== ========================= Persistent Routes: None C: \ Users \ Oleg>

  Read the article

• Iomega Home Media Network Hard Drive: Accesing the data in the disk?

  - by JJarava

  Hi all! I have an Iomega Home Media Network Hard Drive, 1TB, and lately I can't access the data on the drive. The shares (both built-in and created by me) are there, the security works, but when trying to access the data I get a "The network path was not found" message which is worrying, to say the least. I'd like to know if there is a way to get the data off the disks somehow, as some of the data in the drive (ie, pictures and videos of my 1.5 yrs old son) is hard if not impossible to find otherwise. Thanks a lot Javier

  Read the article

• Patch Management and System Inventory on a Windows network?

  - by Scott

  What are some good ways to have patch management and systems/hardware inventory for a Windows (Server 2003 or 2008) network? For example, at a minimum knowing the basics for all the machines out on the network such as OS version, patch level, what hotfixes they have, processor, ram, etc. Even better would be knowing more details such as peripherals. Ideally if there were a way to push service packs, and hotfixes (and other software?) to the machines, that would be great. What are some options for this?

  Read the article

• Is there any reason to subnet a home network?

  - by Will

  For networks I understand we set a netmask on each computer to let it know what IPs it can talk to without going through the router - IPs on the same subnet can talk directly to each other and do not have to go through a router/switch. However, in today's home networks (and I suspect corporate networks as well) every computer is connected to a router/switch (at the low cost of today's hardware I doubt there it much of a market for wired repeaters/hubs). This seems to obviate the need for a subnet mask and subnetting. Considering that in most modern home architectures every computer goes through the router, even to talk to computers on the same network, is there any reason for me to subnet a home network?

  Read the article

• Does using cat5e cables yield any disadvantages in combination with cat6/cat6a network?

  - by agent154

  If I were to have a fully compliant cat6 or cat6a network running through my walls... that is to say, wires and jacks... What would be the concequence of plugging a cat5e wire into one of the jacks? I'm assuming that it would still run at cat5e standards, but obviously not cat6/6a standards because the whole connection is not cat6. I only ask because it seems silly to me to make a bunch of cat6 patch cables for connections that don't really matter, like standard desktop computers and other equipment. Or will doing so hamper the whole network?

  Read the article

• How to specify what network interface to use with TTCP or IPERF?

  - by Sammy

  The PC has two Gigabit Ethernet ports. They function as two separate network adapters. I'm trying to do a simple loopback test between the two. I've tried TTCP and IPERF. They're giving me hard time because I'm using the same physical PC. Using pcattcp... On the receiver end: C:\PCATTCP-0114>pcattcp -r PCAUSA Test TCP Utility V2.01.01.14 (IPv4/IPv6) IP Version : IPv4 Started TCP Receive Test 0... TCP Receive Test Local Host : GIGA ************** Listening...: On TCPv4 0.0.0.0:5001 Accept : TCPv4 0.0.0.0:5001 <- 10.1.1.1:33904 Buffer Size : 8192; Alignment: 16384/0 Receive Mode: Sinking (discarding) Data Statistics : TCPv4 0.0.0.0:5001 <- 10.1.1.1:33904 16777216 bytes in 0.076 real seconds = 215578.95 KB/sec +++ numCalls: 2052; msec/call: 0.038; calls/sec: 27000.000 C:\PCATTCP-0114> On the transmitter end: C:\PCATTCP-0114>PCATTCP.exe -t 10.1.1.1 PCAUSA Test TCP Utility V2.01.01.14 (IPv4/IPv6) IP Version : IPv4 Started TCP Transmit Test 0... TCP Transmit Test Transmit : TCPv4 0.0.0.0 -> 10.1.1.1:5001 Buffer Size : 8192; Alignment: 16384/0 TCP_NODELAY : DISABLED (0) Connect : Connected to 10.1.1.1:5001 Send Mode : Send Pattern; Number of Buffers: 2048 Statistics : TCPv4 0.0.0.0 -> 10.1.1.1:5001 16777216 bytes in 0.075 real seconds = 218453.33 KB/sec +++ numCalls: 2048; msec/call: 0.037; calls/sec: 27306.667 C:\PCATTCP-0114> It's responding alright. But why does it say 0.0.0.0? Is it passing through only one of the network adapters? I want 10.1.1.1 to be the server (receiver) and 10.1.1.2 to be the client (transmitter). These are the IP addresses assigned manually to each network adapter. How do I specify these addresses in TTCP? There is also the IPERF tool which has the -B option. Unfortunately I've been only able to use this option to bind the server to the 10.1.1.1 address. I was unable to bind the client to the 10.1.1.2 address. I might be doing it wrong. Can the -B option be used for both the server as well as the client side? What does the syntax look like for the client?

  Read the article

• configure /etc/hosts file so ALL applications always use local network when it makes sense to do so?

  - by gkdsp

  I have two Linux CentOS servers setup in a local network. ServerA is 192.168.0.1 and serverB is 192.168.0.2. There's an application on serverA that communicates with serverB using host2.serverAname.com. But, the traffic is blocked on serverB because the port being used has a firewall that only allows traffic on the local network to pass. Thus, serverB needs to see traffic from serverA as originating from 192.168.0.1 (instead of host2.serverA.com). Is there a way I can configure the /etc/hosts file to ensure traffic always sent between the two servers uses local IP addresses, regardless of what hostname is in use, and for ALL applications? If so, could someone walk me through an example? I only have 2 servers, so the simpler the better.

  Read the article

• Windows 7 : Any way to disable "show caracter" in WIFI network properties?!

  - by Fox

  Hi everyone, Here's my issue. I'm working in a school as IT Tech and I'm currently planning to roll out Windows 7 on students laptop. The issue is : When you go to the properties of a WIFI network, you have the fields to input the WIFI key, WPA2 key here in my case, and you also have a checkbox that allow you to "unmask" the caracters of the wifi key. This is actually the problem. Anyone who can access the WIFI network properties, will be able to see the WIFI key, which is really an issue in a school envrironnement where student are all eager to get the key for their precious IPod Touch, what I don't want to happen for obvious reasons... So, is there a way to disable that checkbox or else, make the field cleared out when the checkbox is checked, just like it was on Windows XP or Vista? Thanks all for your answer.

  Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >