Search Results

Search found 19788 results on 792 pages for 'remote host'.

Page 187/792 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

• ownCloud WebDAV interface seems to be broken

  - by Nobleleader13245

  I've been trying to host ownCloud on my server but everytime I try to it tells me this : Your web server is not yet properly setup to allow files synchronization because the WebDAV interface seems to be broken. Please double check the installation guides. This is my setup : Windows Server 2012 R2 IIS 8.5 PHP 5.5.11 ownCloud 6.0.3 MySQL 5.6.17 I tried google the error but I can't seem to find anything usefull. Some say I should try if this works : [hostname]/remote.php/webdav/ and yes I can navigate to this folder and I can open files from there. The calendar works and I can also just upload files the web version of ownCloud the only thing that doesn't seem to work is the sync client. The sync client doesn't say anything it just doesn't connect (Screenshot : http://prntscr.com/3p2apz) This is the error log : Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:56:00+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:47+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:37+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:51:24+00:00 This is my php.ini : http://pastebin.com/es3MB8Uh Does anyone have any idea on how I should get this to work? I've been trying to get this to work for about 14 days now and it starts to annoy me =P

  Read the article

• VPS with Plesk, one ip, and godaddy (definely need help)

  - by Francesco

  Hi there, here's my situation : i've Plesk 8.3.0 with one IP and i've registered my domains at godaddy.com My problem : i cannot figure out how to configure plesk and godaddy to have my domains (6) properly working into the VPS. i've only one IP, so i can't have my personal NS and need to use godaddy ns. But.. how do i set all the stuff ? I've made a try but it's not working. Please take a look : This is an example of how the domain i'm actually working on is configured On Plesk : Host Record type Value 1.2.3.4 / 24 PTR mydomain.com. ftp.mydomain.com. CNAME mydomain.com. mail.mydomain.com. A 1.2.3.4 ns.mydomain.com. A 1.2.3.4 mydomain.com. NS ns.mydomain.com. mydomain.com. A 1.2.3.4 mydomain.com. MX (10) mail.mydomain.com. webmail.mydomain.com. A 1.2.3.4 www.mydomain.com. CNAME mydomain.com. On godaddy,(Total DNS Control) for the same domain i have this setup : A (Host) Host Points To TTL Actions * 1.2.3.4 1 Hour CNAMES (Aliases) Host Points To TTL Actions e email.secureserver.net 1 Hour email email.secureserver.net 1 Hour ftp @ 1 Hour imap imap.secureserver.net 1 Hour mail pop.secureserver.net 1 Hour mobilemail mobilemail-v01.prod.mesa1.secureserver.net 1 Hour pda mobilemail-v01.prod.mesa1.secureserver.net 1 Hour pop pop.secureserver.net 1 Hour smtp smtp.secureserver.net 1 Hour webmail webmail.secureserver.net 1 Hour www @ 1 Hour MX (Mail Exchange) Priority Host Goes To TTL Actions 10 @ mailstore1.secureserver.net 1 Hour 0 @ smtp.secureserver.net Host Points To TTL Actions @ ns53.domaincontrol.com @ ns54.domaincontrol.com What should i correct ? Thanks for helping me Francesco

  Read the article

• How to set up a VPN Incoming connection with Windows to tunnel Internet traffic?

  - by Mehrdad

  I want to set up a VPN on a remote server to route all my Internet traffic for privacy reasons. I can set up an incoming connection and connect to it successfully. The problem is, I can just see the remote computer and no other Web sites will open. I want the remote server to act like a NAT. How can I do that? Note that I don't want to split Internet traffic. I actually want to send all the traffic to the remote server but need to make it relay the traffic. For the record, my remote server is Windows Web Server 2008 which does not have routing and remote access service. Clarification I'm mostly interested in server configuration. I don't have any problems configuring the client. By the way, Windows Web Server 2008 seems to have the same VPN features built in client OSes (like Vista) and specifically, it doesn't include the RRAS console in MMC. I'm also open to suggestions regarding third party PPTP/L2TP daemons available, if they are free.

  Read the article

• JBD: Spotted dirty metadata buffer

  - by Jake Mach

  Sep 25 22:19:38 host kernel: [7798806.146942] JBD: Spotted dirty metadata buffer (dev = loop0, blocknr = 267). There's a risk of filesystem corruption in case of system crash. Sep 25 22:19:38 host kernel: [7798806.146956] JBD: Spotted dirty metadata buffer (dev = loop0, blocknr = 1). There's a risk of filesystem corruption in case of system crash. Sep 25 22:19:38 host kernel: [7798806.146967] JBD: Spotted dirty metadata buffer (dev = loop0, blocknr = 353). There's a risk of filesystem corruption in case of system crash. Sep 25 22:19:38 host kernel: [7798806.147121] JBD: Spotted dirty metadata buffer (dev = loop0, blocknr = 353). There's a risk of filesystem corruption in case of system crash. Sep 25 22:19:38 host kernel: [7798806.147133] JBD: Spotted dirty metadata buffer (dev = loop0, blocknr = 1). There's a risk of filesystem corruption in case of system crash. Sep 25 22:19:38 host kernel: [7798806.147143] JBD: Spotted dirty metadata buffer (dev = loop0, blocknr = 267). There's a risk of filesystem corruption in case of system crash. [7817859.850517] EXT4-fs error (device loop0): ext4_mb_generate_buddy: EXT4-fs: group 1: 28618 blocks in bitmap, 29028 in gd what does this mean? how did this happen?

  Read the article

• ssh over a tunnel in order to configure auto login

  - by Vihaan Verma

  I m trying to copy the id_rsa.pub key to the server. The server in my case also has a virutal machine called dev which runs on the host machine. I copied the id_rsa.pub key to the host for auto log in using this command. ssh-copy-id -i ~/.ssh/id_rsa.pub vickey@host which worked fine and I can auto log in to host. I also wanted to auto log in to the dev machine. I know I can just copy the contents of authorized_keys from the host machine to the dev machine but I m looking for a command line of doing things. Creating a tunnel seemed like the solution ssh vickey@host -L 2000:dev:22 -N now when I tried ssh-copy-id -i ~/.ssh/id_rsa.pub vickey@localhost -P 2000 the password that worked here was of my local machine , I expected it to ask me password of my dev machine. The above command adds the pub key to the local machine and not to the dev machine. However this commands asks me for the dev password and copies the files. scp -P 2000 vickey@localhost:/home/vickey/trash/vim . vickey@localhost's password: vim 100% 111 0.1KB/s 00:00 How do I do the same with ssh-copy-id ?

  Read the article

• Pattern matching gnmap fields with SED

  - by Ovid

  I am testing the regex needed for creating field extraction with Splunk for nmap and think I might be close... Example full line: Host: 10.0.0.1 (host) Ports: 21/open|filtered/tcp//ftp///, 22/open/tcp//ssh//OpenSSH 5.9p1 Debian 5ubuntu1 (protocol 2.0)/, 23/closed/tcp//telnet///, 80/open/tcp//http//Apache httpd 2.2.22 ((Ubuntu))/, 10000/closed/tcp//snet-sensor-mgmt/// OS: Linux 2.6.32 - 3.2 Seq Index: 257 IP ID Seq: All zeros I've used underscore "_" as the delimiter because it makes it a little easier to read. root@host:/# sed -n -e 's_\([0-9]\{1,5\}\/[^/]*\/[^/]*\/\/[^/]*\/\/[^/]*\/.\)_\n\1_pg' filename The same regex with the escape characters removed: root@host:/# sed -n -e 's_\([0-9]\{1,5\}/[^/]*/[^/]*//[^/]*//[^/]*/.\)_\n\1_pg' filename Output: ... ... ... Host: 10.0.0.1 (host) Ports: 21/open|filtered/tcp//ftp///, 22/open/tcp//ssh//OpenSSH 2.0p1 Debian 2ubuntu1 (protocol 2.0)/, 23/closed/tcp//telnet///, 80/open/tcp//http//Apache httpd 5.4.32 ((Ubuntu))/, 10000/closed/tcp//snet-sensor-mgmt/// OS: Linux 9.8.76 - 7.3 Seq Index: 257 IPID Seq: All zeros ... ... ... As you can see, the pattern matching appears to be working - although I am unable to: 1 - match on both the end of line ( comma , and white/tabspace). The last line contains unwanted text (in this case, the OS and TCP timing info) and 2 - remove any of the un-necessary data - i.e. print only the matching pattern. It is actually printing the whole line. If i remove the sed -n flag, the remaining file contents are also printed. I can't seem to locate a way to only print the matched regex. Being fairly new to sed and regex, any help or pointers is greatly appreciated!

  Read the article

• Website memory problem

  - by Toktik

  I have CentOS 5 installed on my server. I'm in VPS server. I have site where I have constant online ~150. First look on site looks OK. But when I go through links, sometimes I receive Out of memory PHP error. It looks like this Fatal error: Out of memory (allocated 36962304) (tried to allocate 7680 bytes) in /home/host/public_html/sites/all/modules/cck/modules/fieldgroup/fieldgroup.install on line 100 And always, not allocated memory is very small. In average I have 30% CPU load, 25% RAM load. So I think here is not a physical memory problem. My PHP memory limit was set to 1500MB. My apache error log looks like this [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Out of memory, referer: http://www.host.com/17402 [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Premature end of script headers: index.php, referer: http://www.host.com/17402 [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Out of memory, referer: http://www.host.com/17402 [Thu Sep 30 17:48:59 2010] [error] [client 91.204.190.5] Premature end of script headers: index.php, referer: http://www.host.com/17402 [Thu Sep 30 17:49:00 2010] [error] [client 91.204.190.5] File does not exist: /home/host/public_html/favicon.ico Past I have not met with this on my server and the problem appeared itself. Besides this I'm receiving some server errors on mail. cpsrvd failed @ Fri Sep 24 16:45:20 2010. A restart was attempted automagically. Service Check Method: [tcp connect] Failure Reason: Unable to connect to port 2086 Same for tailwatchd. Support tried, and can't help me...

  Read the article

• Nmap XML parsing with Powershell

  - by Craig620

  I am trying to parse the XML output from NMAP and isolate just the hostadddress and the vendor from the osmatch. I've actually done that with the following: select-xml -path nmap.xml -xpath "nmaprun/host/address/@addr|nmaprun/host/os/osmatch/osclass/@vendor" | select -expandproperty node Which produces: #text ----- 10.20.30.1 HP 10.20.30.2 Linux 10.20.30.3 HP What I was not expecting is that it would jam it all into a single column.Silly me would like the address in one column, and the vendor in another column. I Would like: #addr #vendor ----- ------- 10.20.30.1 HP 10.20.30.2 Linux 10.20.30.3 HP In the several hours I spent learning xpath today, I also realized that this file has a single address for each host, but multiple OS guesses for each host. I would also like to use only the first osGuess in the output. Tired using: -xpath "(nmaprun/host/os/osmatch/osclass/@vendor)[1]" But that truncates the whole data set to a single line of output, instead of only limiting the only the first osclass element of each host. Changing the parens to surround only the @vendor element like .../(@vendor)[1] and .../(@vendor[1]) but both fail with "Expression must evaluate to a node-set." Thanks in advance

  Read the article

• Troubleshooting a Windows 7 PC that wouldn't sleep

  - by NPE

  I have a new Windows 7 PC that wouldn't sleep (not just automatically, but also when specifically told to). The screen goes black momentarily, but within two seconds the machine comes back as if nothing has happened. I tried powercfg energy. This produces some errors quoted at the bottom of this post, plus some warnings about timer resolution. There are no USB devices connected other than wireless keyboard + mouse (Logitech MK250); I tried unplugging them to no effect. The motherboard is Asus P7P55D-E. powercfg lastwake says "Wake History Count - 0", which I take to mean that it never actually went to sleep. I dual boot into Ubuntu, and was having exactly the same problem on the Linux side. That turned out to do with USB 3.0, which I've now disabled in the BIOS. This has solved the problem on the Ubuntu side of things, but made no difference to Windows 7. Any suggestions? Suspend:USB Device not Entering Suspend The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use. Device Name Generic USB Hub Host Controller ID PCI\VEN_8086&DEV_3B34 Host Controller Location PCI bus 0, device 29, function 0 Device ID USB\VID_8087&PID_0020 Port Path 1 USB Suspend:USB Device not Entering Suspend The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use. Device Name USB Root Hub Host Controller ID PCI\VEN_8086&DEV_3B34 Host Controller Location PCI bus 0, device 29, function 0 Device ID USB\VID_8086&PID_3B34 Port Path USB Suspend:USB Device not Entering Suspend The USB device did not enter the Suspend state. Processor power management may be prevented if a USB device does not enter the Suspend state when not in use. Device Name USB Composite Device Host Controller ID PCI\VEN_8086&DEV_3B34 Host Controller Location PCI bus 0, device 29, function 0 Device ID USB\VID_046D&PID_C52E Port Path 1,8

  Read the article

• port forwarding with socks over proxy

  - by Oz123

  I am trying to browse a wiki that runs on a server inside one domain from another domain. The wiki is accessible only on the LAN, but I need to browse it from another LAN to which I connect with an SSH tunnel ... Here is my setup and the steps I did so far: ~.ssh/confing on wikihost: Host gateway User kisteuser Port 443 Hostname gateway.companydomain.com ProxyCommand /home/myuser/bin/ssh-https-tunnel %h %p # ssh-https-tunnel: # http://ttcplinux.sourceforge.net/tools/stunnel Protocol 2 IdentityFile ~/.ssh/key_dsa LocalForward 11069 localhost:11069 Host server1 User kisteuser Hostname localhost Port 11069 LocalForward 8022 server1:22 LocalForward 17001 server1:7100 LocalForward 8080 www-proxy:3128 RemoteForward 11069 localhost:22 from wikihost myuser@wikihost: ssh -XC -t gateway.companydomain.com ssh -L11069:localhost:22 server1 on another terminal: ssh gateway.companydomain.com Now, on my companydomain I would like to start firefox and browse the wiki on wikihost. I did: [email protected] ~ $ ssh gateway Have a lot of fun... kisteuser@gateway ~ $ ssh -D 8383 localhost user@localhost's password: user@wikiserver:~> My .ssh/config on that side looks like that: host server1 localforward 11069 localhost:11069 host localhost user myuser port 11069 host wikiserver forwardagent yes user myuser port 11069 hostname localhost Now, I started firefox on the server called gateway, and edited the proxy settings to use SOCKSv5, specifying that the proxy should be gateway and use the port 8383... kisteuser@gateway ~ $ LANG=C firefox -P --no-remote And, now I get the following error popping in the Terminal of wikiserver: myuser@wikiserver:~> channel 3: open failed: connect failed: Connection refused channel 3: open failed: connect failed: Connection refused channel 3: open failed: connect failed: Connection refused Confused? Me too ... Please help me understand how to properly build the tunnels and browse the wiki over SOCKS protocol. update: I managed to browse the wiki on wikiserver with the following changes: host wikiserver forwardagent yes user myuser port 11069 hostname localhost localforward 8339 localhost:8443 Now when I ssh gateway I launch Firefox and go to localhost:8339 and I hit the start page of the wiki, which is served on Port 8443. Now I ask myself is SOCKS really needed? Can someone elaborate on that ?

  Read the article

• SSH Private Key Not Working in Some Directories

  - by uesp

  I have a strange issue where SSH won't properly connect with a private-key if the key file is in certain directories. I've setup the keys on a set of servers and the following command ssh -i /root/privatekey [email protected] works fine and I login to the given host without getting prompted by a password, but this command: ssh -i /etc/keyfiles/privatekey [email protected] gives me a password prompt. I've narrowed it down that this behavior occurs in only some sub-directories of /etc/. For example /etc/httpd1/ gives me a password prompt but /etc/httpd/ does not. What I've checked so far: All private key files used are identical (copied from the original file). The private key file and directories used have identical permissions. No relevant error messages in the server/client logs. No interesting debug messages from ssh -v (it just seems to skip the key file). It happens with connecting to different hosts. After more testing it is not the actual directory name. For example: mkdir /etc/test cp /root/privatekey /etc/test ssh -i /etc/test/privatekey [email protected] # Results in password prompt cp /root/privatekey /etc/httpd # Existing directory ls -ald test httpd # drwxr-xr-x 4 root root 4096 Mar 5 18:25 httpd # drwxr-xr-x 2 root root 4096 Mar 5 18:43 test ssh -i /etc/httpd/privatekey [email protected] # Results in *no* prompt rm -r test cp -R /etc/httpd /etc/test ssh -i /etc/test/privatekey [email protected] # Results in *no* prompt` I'm sure its just something simple I've overlooked but I'm at a loss.

  Read the article

• Microsoft Licensing Scenario/Questions [closed]

  - by user17455

  Possible Duplicate: Can you help me with my software licensing question? I am a member of a team developing a third party application (APP) that listens for and services connections from remote devices via TCP. Also, some of these remote devices allow 1 or more users to interact with the remote device. On some of the remote devices, it is impossible for a user to interact with the device. The user/remote device makes no use of any Windows Server service - not DHCP, not IIS, not File Server, not Print Serer, not AD. The remote device's only connection to the Windows Server machine is through the APP's TCP ports. Our company has no interaction with Microsoft. We do not have a Microsoft sales team. Past inquiries have determined that it is cheaper for us to buy Microsoft software (and CALs) retail than to enter into any kind of "arrangement" with Microsoft. I have many questions about SQL Server CALs and Windows Server 2008 CALs. How can I obtain authoritative/legally binding answers? I am not looking for FREE legal advice. I AM looking for FREE advice about who/what/where I can responsibly spend my money to get meaningful information. I fear that passing this on to the local company law firm will just mean that I will be paying them to educate themselves on Microsoft licensing. And if that's like writing code to a new Microsoft API - they are not going to get it right the first time. Going to Microsoft for answers sounds like swimming up to a hungry shark and asking "One leg or two?" I am hoping someone has been down this road before and knows a law firm/lawyer that is experienced in these matters. Any help/suggestion welcome. Thanks.

  Read the article

• Best NIC config when virtual servers need iSCSI storage?

  - by icky2000

  I have a Windows 2008 server running Hyper-V. There are 6 NICs on the server configured like this: NIC01 & NIC02: teamed administrative interface (RDP, mgmt, etc) NIC03: connected to iSCSI VLAN #1 NIC04: connected to iSCSI VLAN #2 NIC05: dedicated to one virtual switch for VMs NIC06: dedicated to another virtual switch for VMs The iSCSI NICs are used obviously for storage to host the VMs. I put half the VMs on the host on the switch assigned to NIC05 and the other half on the switch assigned to NIC06. We have multiple production networks that the VMs could appear on so the switch ports that NIC05 & NIC06 are connected to are trunked and we then tag the NIC on the VM for the appropriate VLAN. No clustering on this host. Now I wish to assign some iSCSI storage direct to a VM. As I see it I have 2 options: Add the iSCSI VLANs to the trunked ports (NIC05 and NIC06), add two NICs to the VM that needs iSCSI storage, and tag them for the iSCSI VLANs Create two additional virtual switches on the host. Assign one to NIC03 and one to NIC04. Add two NICs to the VM that needs iSCSI storage and let them share that path to the SAN with the host. I'm wondering about how much overhead the VLAN tagging in Hyper-V has and haven't seen any discussion about that. I'm also a bit concerned that something funky on the iSCSI-connected VM could saturate the iSCSI NICs or cause some other problem that could threaten storage access for the entire host which would be bad. Any thoughts or suggestions? How do you configure your hosts when VMs connect direct to iSCSI?

  Read the article

• ipv6 with KVM on debian

  - by Eliasdx

  I have trouble setting up IPV6 on my Proxmox (KVM) server: My ISP sent me this information(xxx=placeholder): IPs: 2a01:XXX:XXX:301:: /64 Gateway: 2a01:XXX:XXX:300::1 /59 This is the interface setup on the host server: auto vmbr1 iface vmbr1 inet static address 178.XX.XX.4 broadcast 178.XX.XX.63 netmask 255.255.255.192 pointopoint 178.XX.XX.1 gateway 178.XX.XX.1 bridge_ports eth0 bridge_stp off bridge_fd 0 iface vmbr1 inet6 static address 2a01:XXX:XXX:301::2 netmask 64 up ip -6 route add 2a01:XXX:XXX:300::1 dev vmbr1 down ip -6 route del 2a01:XXX:XXX:300::1 dev vmbr1 up ip -6 route add default via 2a01:XXX:XXX:300::1 dev vmbr1 down ip -6 route del default via 2a01:XXX:XXX:300::1 dev vmbr1 On the guest: auto eth0 iface eth0 inet static address 178.xx.xx.47 netmask 255.255.255.255 broadcast 178.xx.xx.63 gateway 178.xx.xx.1 pointopoint 178.xx.xx.1 iface eth0 inet6 static pre-up modprobe ipv6 address 2a01:XXX:XXX:301::2:2 netmask 64 up ip -6 route add 2a01:XXX:XXX:300::1 dev eth0 down ip -6 route del 2a01:XXX:XXX:300::1 dev eth0 up ip -6 route add default via 2a01:XXX:XXX:300::1 dev eth0 down ip -6 route del default via 2a01:XXX:XXX:300::1 dev eth0 Ipv4 works on both host and guest but Ipv6 only works "sometimes". It's up for minutes and then down again until I change something. However I can actually ping the host and the guest from both host and guest. host:~# ip -6 neigh 2a01:XXX:XXX:301::100:2 dev vmbr1 lladdr 00:50:56:00:00:e0 REACHABLE 2a01:XXX:XXX:300::1 dev vmbr1 lladdr 00:26:88:76:18:18 router STALE host:~# ip -6 route 2a01:XXX:XXX:300::1 dev vmbr1 metric 1024 mtu 1500 advmss 1440 hoplimit 4294967295 2a01:XXX:XXX:301::/64 dev vmbr1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev vmbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev vmbr1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev tap101i1d0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via 2a01:XXX:XXX:300::1 dev vmbr1 metric 1024 mtu 1500 advmss 1440 hoplimit 4294967295 Does someone know why it isn't working? And is there a way to configure multiple v6 IPs from the same subnet so I can dedicate IPs to websites on a server with multiple virtualhosts?

  Read the article

• ipv6 with KVM on debian

  - by Eliasdx

  I have trouble setting up IPV6 on my Proxmox (KVM) server: My ISP sent me this information(xxx=placeholder): IPs: 2a01:XXX:XXX:301:: /64 Gateway: 2a01:XXX:XXX:300::1 /59 This is the interface setup on the host server: auto vmbr1 iface vmbr1 inet static address 178.XX.XX.4 broadcast 178.XX.XX.63 netmask 255.255.255.192 pointopoint 178.XX.XX.1 gateway 178.XX.XX.1 bridge_ports eth0 bridge_stp off bridge_fd 0 iface vmbr1 inet6 static address 2a01:XXX:XXX:301::2 netmask 64 up ip -6 route add 2a01:XXX:XXX:300::1 dev vmbr1 down ip -6 route del 2a01:XXX:XXX:300::1 dev vmbr1 up ip -6 route add default via 2a01:XXX:XXX:300::1 dev vmbr1 down ip -6 route del default via 2a01:XXX:XXX:300::1 dev vmbr1 On the guest: auto eth0 iface eth0 inet static address 178.xx.xx.47 netmask 255.255.255.255 broadcast 178.xx.xx.63 gateway 178.xx.xx.1 pointopoint 178.xx.xx.1 iface eth0 inet6 static pre-up modprobe ipv6 address 2a01:XXX:XXX:301::2:2 netmask 64 up ip -6 route add 2a01:XXX:XXX:300::1 dev eth0 down ip -6 route del 2a01:XXX:XXX:300::1 dev eth0 up ip -6 route add default via 2a01:XXX:XXX:300::1 dev eth0 down ip -6 route del default via 2a01:XXX:XXX:300::1 dev eth0 Ipv4 works on both host and guest but Ipv6 only works "sometimes". It's up for minutes and then down again until I change something. However I can actually ping the host and the guest from both host and guest. host:~# ip -6 neigh 2a01:XXX:XXX:301::100:2 dev vmbr1 lladdr 00:50:56:00:00:e0 REACHABLE 2a01:XXX:XXX:300::1 dev vmbr1 lladdr 00:26:88:76:18:18 router STALE host:~# ip -6 route 2a01:XXX:XXX:300::1 dev vmbr1 metric 1024 mtu 1500 advmss 1440 hoplimit 4294967295 2a01:XXX:XXX:301::/64 dev vmbr1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev vmbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev vmbr1 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev tap101i1d0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via 2a01:XXX:XXX:300::1 dev vmbr1 metric 1024 mtu 1500 advmss 1440 hoplimit 4294967295 Does someone know why it isn't working? And is there a way to configure multiple v6 IPs from the same subnet so I can dedicate IPs to websites on a server with multiple virtualhosts?

  Read the article

• Problem with Strange VMWare behaviour when shutting down guest.

  - by adza77

  Hi, I've been having a problem for a while now with VMWare Workstaion. (Originally with 6.5, but now with 7.0 and 7.0.1 too). The problem occurs when I choose to shut down a guest. VMWare itself seems to hang. If I choose to shut down a guest that's opened full screen, and during the process I minimise the screen to work on other applications in the host, often (not all the time) when I return to the guest I have a 'greyed out' screen and the system becomes unresponsive. The host O/S still seems to be working, but I am unable to switch to other applications. (I can bring up the taskbar on the host and 'see' other applications and even switch to them, but VMWare still stays 'on top' being unresponsive). I can not terminate VMWare even when windows says that the application has become unresponsive and gives me the option to terminate. VMWare stays on top, and I'm forced to either shutdown, or log off and log back on in order to regain control of my computer. This happens with both Windows 7 and Windows Vista guest operating systems (32 bit), and I have had it happen on multiple host machines, and multiple guest machines too. Current Host: Windows 7 64 bit, 8GB Ram, 500GB HDD, i7 Processor. I have been searching for more than 6 months for a solution but have found none, so finally decided to post here. Does anyone know what might be causing the problem (+or even how to minimize the VM so I can at least access any other applications and save work before forcing a logoff / reboot+) would be extrememly handly. If I know the correct keystrokes to save and close in an application on the host I can do this by task-switching to the desired app to save and close successfully, but I can't see what I'm doing because VMWare Workstation is still on-top 'greyed' out. Cheers Adam.

  Read the article

• Problem with Strange VMWare behaviour when shutting down guest.

  - by adza77

  Hi, I've been having a problem for a while now with VMWare Workstaion. (Originally with 6.5, but now with 7.0 and 7.0.1 too). The problem occurs when I choose to shut down a guest. VMWare itself seems to hang. If I choose to shut down a guest that's opened full screen, and during the process I minimise the screen to work on other applications in the host, often (not all the time) when I return to the guest I have a 'greyed out' screen and the system becomes unresponsive. The host O/S still seems to be working, but I am unable to switch to other applications. (I can bring up the taskbar on the host and 'see' other applications and even switch to them, but VMWare still stays 'on top' being unresponsive). I can not terminate VMWare even when windows says that the application has become unresponsive and gives me the option to terminate. VMWare stays on top, and I'm forced to either shutdown, or log off and log back on in order to regain control of my computer. This happens with both Windows 7 and Windows Vista guest operating systems (32 bit), and I have had it happen on multiple host machines, and multiple guest machines too. Current Host: Windows 7 64 bit, 8GB Ram, 500GB HDD, i7 Processor. I have been searching for more than 6 months for a solution but have found none, so finally decided to post here. Does anyone know what might be causing the problem (+or even how to minimize the VM so I can at least access any other applications and save work before forcing a logoff / reboot+) would be extrememly handly. If I know the correct keystrokes to save and close in an application on the host I can do this by task-switching to the desired app to save and close successfully, but I can't see what I'm doing because VMWare Workstation is still on-top 'greyed' out. Cheers Adam.

  Read the article

• How can I keep SSH's know_hosts up to date (semi-securely)?

  - by Chas. Owens

  Just to get this out in front so I am not told not to do this: The machines in question are all on a local network with little to no internet access (they aren't even well connected to the corporate network) Everyone who has the ability to setup a man-in-the-middle attack already has root on the machine The machines are reinstalled as part of QA procedures, so having new host keys is important (we need to see how the other machines react); I am only trying to make my machine nicer to use. I do a lot of reinstalls on machines which changes their host keys. This necessitates going into ~/.ssh/known_hosts on my machine and blowing away to old key and adding the new key. This is a massive pain in the tuckus, so I have started considering ways to automate this. I don't want to just blindly accept any host key, so patching OpenSSH to ignore host keys is out. I have considered creating a wrapper around the ssh command the will detect the error coming back from ssh and present me with a prompt to delete the old key or quit. I have also considered creating a daemon that would fetch the latest host key from a machine on a whitelist (there are about twenty machines that are being constantly reinstalled) and replace the old host key in known_hosts. How would you automate this process?

  Read the article

• use ssh tunnel with phpmyadmin

  - by JohnMerlino

  I been using ssh tunnel to bypass firewall of remote mysql server. On my Ubuntu 12.04 installation, it works via the terminal and it works when using a program called mysql workbench. However, that program freezes often and I want to try phpmyadmin as an alternative. However, I cannot connect to remote server using ssh tunnel on phpmyadmin, albeit I can connect locally. These are the steps I've tried: 1) Open a tunnel, listening on localhost:3307 and forwarding everything to xxx.xxx.xxx.xxx:3306 (used 3307 because MySQL on my local machine uses the default port 3306): ssh -L 3307:localhost:3306 [email protected] So now I have the port for tunnel open and I have my local mysql installation default port: $ netstat -tln Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:3307 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN ... 2) Now I can easily connect to remote server via localhost using the terminal: $ mysql -u user.name -p -h 127.0.0.1 -P 3307 Notice that I expicitly identify 3307 as the port, so traffic forwards to the remote server, and hence it logs me in to the remote server. Unfortunately, the localhost/phpmyadmin local login interface doesn't allow you to specify a port option. So I modify the config-db.php file and change the $dbport variable to 3307, under the impression that the phpmyadmin interface will now work with port 3307: $ sudo vim /etc/phpmyadmin/config-db.php $dbport='3307'; Then I restart the mysql server. Unfortunately, it didn't work. When I use the remote credentials to login, it gives me error: #1045 Cannot log in to the MySQL server

  Read the article

• LXC, Port forwarding and iptables

  - by Roberto Aloi

  I have a LXC container (10.0.3.2) running on a host. A service is running inside the container on port 7000. From the host (10.0.3.1, lxcbr0), I can reach the service: $ telnet 10.0.3.2 7000 Trying 10.0.3.2... Connected to 10.0.3.2. Escape character is '^]'. I'd love to make the service running inside the container accessible to the outer world. Therefore, I want to forward port 7002 on the host to port 7000 on the container: iptables -t nat -A PREROUTING -p tcp --dport 7002 -j DNAT --to 10.0.3.2:7000 Which results in (iptables -t nat -L): DNAT tcp -- anywhere anywhere tcp dpt:afs3-prserver to:10.0.3.2:7000 Still, I cannot access the service from the host using the forwarded port: $ telnet 10.0.3.1 7002 Trying 10.0.3.1... telnet: Unable to connect to remote host: Connection refused I feel like I'm missing something stupid here. What things should I check? What's a good strategy to debug these situations? For completeness, here is how iptables are set on the host: iptables -F iptables -F -t nat iptables -F -t mangle iptables -X iptables -P INPUT DROP iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -A INPUT -p tcp --dport 22 -j ACCEPT iptables -A INPUT -p icmp --icmp-type echo-request -j ACCEPT iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE iptables -t nat -A POSTROUTING -o lxcbr0 -j MASQUERADE iptables -t nat -A PREROUTING -p tcp --dport 7002 -j DNAT --to 10.0.3.2:7000

  Read the article

• postfix revived and delivered have the same values (?)

  - by thinkingbig

  I have configured my first server (Debian with ISPConfig). Generally i want to send bulk e-mails to our users, i configure postfix and turn on postfix... but... After 1 hour of sending emails i have logs like this: Grand Totals messages 21886 received 21883 delivered 0 forwarded 0 deferred 234 bounced 0 rejected (0%) 0 reject warnings 0 held 0 discarded (0%) 30805k bytes received 31280k bytes delivered 3 senders 3 sending hosts/domains 12588 recipients 3 recipient hosts/domains Per-Hour Traffic Summary time received delivered deferred bounced rejected -------------------------------------------------------------------- 0000-0100 0 0 0 0 0 0100-0200 0 0 0 0 0 0200-0300 0 0 0 0 0 0300-0400 0 0 0 0 0 0400-0500 0 0 0 0 0 0500-0600 0 0 0 0 0 0600-0700 0 0 0 0 0 0700-0800 0 0 0 0 0 0800-0900 0 0 0 0 0 0900-1000 0 0 0 0 0 1000-1100 0 0 0 0 0 1100-1200 0 0 0 0 0 1200-1300 0 0 0 0 0 1300-1400 0 0 0 0 0 1400-1500 0 0 0 0 0 1500-1600 15311 15306 0 168 0 1600-1700 6575 6577 0 66 0 1700-1800 0 0 0 0 0 1800-1900 0 0 0 0 0 1900-2000 0 0 0 0 0 2000-2100 0 0 0 0 0 2100-2200 0 0 0 0 0 2200-2300 0 0 0 0 0 2300-2400 0 0 0 0 0 Host/Domain Summary: Message Delivery sent cnt bytes defers avg dly max dly host/domain 21521 30353k 0 3.4 m 15.5 m wp.pl 355 919k 0 54.9 s 13.0 m mysenderdomainexample.pl 7 8477 0 1.7 s 1.9 s prokonto.pl Host/Domain Summary: Messages Received msg cnt bytes host/domain 21879 30786k mysenderdomainexample.pl 5 16196 mx4.wp.pl 1 3200 mx3.wp.pl Senders by message count 21783 [email protected] 96 [email protected] 6 from=< **So, my question is: 1) Why i have recived and delivered have the same values (approx)? 2) How can I check if an email has been delivered? 3) How to change default "root" and "www-data" user (FROM / RETURN PATH) to another? I have changed this in script, but postfix ignore scripting values and send every mail from root (we have .php send cron's in /etc/crontab) 4) WHY APPROX 100 % MAILS RECIVED HAS BEEN ADRESED TO MY SENDER HOST? Host/Domain Summary: Messages Received Waiting for respond, Regards TB**

  Read the article

• Deploying multiple identical copies of a virtual machine for compute tasks

  - by Reid

  I have a compute task which has a large number of library dependencies. I would like to deploy it on some of my company's large Linux clusters, where I do not have root. I could probably track down, compile, and install the right versions of all the libraries, but this looks to be quite tedious and would have to be repeated if I deployed it again somewhere else. On the other hand, it's pretty easy to install on current Ubuntu. This led me to wonder about a virtual machine approach. Could I put together a virtual machine which booted up, ran the computation (with parameters from and results to the host), and then shut down? In other words, I'd like a command like this that I could run on the host: $ ./run-vm --ram N --task /path/on/host/foo.sh --results /another/host/dir/ This would boot the VM, run foo.sh, and put the (relatively small) results of the computation in /another/host/dir/. It's important to start up many instances of the VM simultaneously, both on a single node and multiple nodes of the cluster. So it would be nice if I didn't have to make many copies of the VM virtual disk and metadata. As the task instances are completely independent, the VMs would not need any network support once deployed, or any outside communications beyond reading and writing the host filesystem. Is this possible, and if so, how might I go about doing it? Are there assumptions I've made above which are bogus?

  Read the article

• How to determine if my AWS/EC2 server has been compromised / resolution?

  - by ElHaix

  I have recently seen an increase in network in/out activity on my server and am trying to determine if my AWS/EC2 instance has been compromised, and if so, how to resolve? In my security group I have: Inbound: 80 (HTTP) 0.0.0.0/0 Outbound: 80 (HTTP) 0.0.0.0/0 443 (HTTPS) 0.0.0.0/0 Using TCP-UDP Endpoint Viewer: I see a lot of w3wp.exe TCP processes with varying local ports http and numbered, as well as varying remote ports. Some processes go red/yellow/green on updates . I see Remote address for most w3wp processes are my ec2 instance, however I am seeing several to *.deploy.akamaitechnologies.com and *.deploy.static.akamaitechnologies.com with received bytes varying between 4-11 megs. I also see Ec2Config.exe, remote address: 169.254.169.254 System Process Remote Address: fetcher4-4.p.mail.ru (how can I get rid of this one?!) local port: http remote port: 33432 I am also seeing some system processes from 114.216-244-93-rdns.wowrack.com: Protocol: TCP local port: http remote port: varying As well as some baiduspider "System Process"'s. I'm afraid that my system may have been compromised, and wondering if these results are any indication of that. If so, how can I get eliminate these possible threats? I have MS Security Essentials installed.

  Read the article

• Whats the difference between pulling from a branch into master and pushing that branch onto master?

  - by Justin808

  In Tortoisegit, on the repository, I right-click and select sync. At the top of the dialog there are options for Local Branch and Remote Branch. If the local branch is named DeveloperA and the remote branch is master and I do a push, what happens? If the local branch is master and remote branch is DeveloperA and I Pull, what happens? If I am on the master branch and right click, select Merge and change the From to be my DeveloperA branch, what happens? If I try to push from master to remote master and the remote is updated git stops and tells me to pull. It seems if I push from DeveloperA to master it doens't stop, it just clobbers, it that correct? We're having an issue using git where the remote master branch gets clobbered at times and we are trying to figure out why. For example there is a developer working on his DeveloperA branch. He'll pull from master to get any updates, then push to master to push out his changes. But there are times that the push lists more files in the Out Commit list than he's edited. The odd thing is he can't revert those files as git is saying they are up to date and have not been modified. Yet when he pushes git pushes the files out. The problem is if there are changes between his pull and push the changes get clobbered.

  Read the article

• Cloning a git repository from a machine running OS X

  - by Mike

  Hi folks, I'm trying to host a git repository from my home OS X machine, and I'm stuck on the last step of cloning the repository from a remote system. Here's what I've done so far: On the OS X (10.6.6) machine (heretofore dubbed the "server") I created a new admin user Logged into the new user's account Installed git Created an empty git repository via "git init" Turned on remote login Set port mapping on my router (airport extreme) to send ssh traffic to the server Added a ".ssh" directory to the user's home directory From the remote machine (also an OS X 10.6.6 machine), I sent that machine's public key to the server using scp and the login credentials of the user created in step 1 To test that the server would use the remote machine's public key, I ssh'd to the server using the username of the user created in step 1 and indeed was able to connect successfully without being asked for a password I installed git on the remote machine From the remote machine I attempted to "git clone ssh://[email protected]:myrepo" (where "user", "my.server.address", and "myrepo" are all replaced by the actual username, server address and repo folder name, respectively) However, every time I try the command in step 11, I get asked to confirm the server's RSA fingerprint, then I'm asked for a password, but the password for the user I set up for that machine never works. Any advice on how to make this work would be greatly appreciated!

  Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >