Search Results

Search found 21955 results on 879 pages for 'self host'.

Page 187/879 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

• Cisco 891w multiple VLAN configuration

  - by Jessica

  I'm having trouble getting my guest network up. I have VLAN 1 that contains all our network resources (servers, desktops, printers, etc). I have the wireless configured to use VLAN1 but authenticate with wpa2 enterprise. The guest network I just wanted to be open or configured with a simple WPA2 personal password on it's own VLAN2. I've looked at tons of documentation and it should be working but I can't even authenticate on the guest network! I've posted this on cisco's support forum a week ago but no one has really responded. I could really use some help. So if anyone could take a look at the configurations I posted and steer me in the right direction I would be extremely grateful. Thank you! version 15.0 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ESI ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings ! aaa new-model ! ! aaa authentication login userauthen local aaa authorization network groupauthor local ! ! ! ! ! aaa session-id common ! ! ! clock timezone EST -5 clock summer-time EDT recurring service-module wlan-ap 0 bootimage autonomous ! crypto pki trustpoint TP-self-signed-3369945891 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-3369945891 revocation-check none rsakeypair TP-self-signed-3369945891 ! ! crypto pki certificate chain TP-self-signed-3369945891 certificate self-signed 01 (cert is here) quit ip source-route ! ! ip dhcp excluded-address 192.168.1.1 ip dhcp excluded-address 192.168.1.5 ip dhcp excluded-address 192.168.1.2 ip dhcp excluded-address 192.168.1.200 192.168.1.210 ip dhcp excluded-address 192.168.1.6 ip dhcp excluded-address 192.168.1.8 ip dhcp excluded-address 192.168.3.1 ! ip dhcp pool ccp-pool import all network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 10.171.12.5 10.171.12.37 lease 0 2 ! ip dhcp pool guest import all network 192.168.3.0 255.255.255.0 default-router 192.168.3.1 dns-server 10.171.12.5 10.171.12.37 ! ! ip cef no ip domain lookup no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO891W-AGN-A-K9 sn FTX153085WL ! ! username ESIadmin privilege 15 secret 5 $1$g1..$JSZ0qxljZAgJJIk/anDu51 username user1 password 0 pass ! ! ! class-map type inspect match-any ccp-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-all ccp-insp-traffic match class-map ccp-cls-insp-traffic class-map type inspect match-any ccp-cls-icmp-access match protocol icmp class-map type inspect match-all ccp-invalid-src match access-group 100 class-map type inspect match-all ccp-icmp-access match class-map ccp-cls-icmp-access class-map type inspect match-all ccp-protocol-http match protocol http ! ! policy-map type inspect ccp-permit-icmpreply class type inspect ccp-icmp-access inspect class class-default pass policy-map type inspect ccp-inspect class type inspect ccp-invalid-src drop log class type inspect ccp-protocol-http inspect class type inspect ccp-insp-traffic inspect class class-default drop policy-map type inspect ccp-permit class class-default drop ! zone security out-zone zone security in-zone zone-pair security ccp-zp-self-out source self destination out-zone service-policy type inspect ccp-permit-icmpreply zone-pair security ccp-zp-in-out source in-zone destination out-zone service-policy type inspect ccp-inspect zone-pair security ccp-zp-out-self source out-zone destination self service-policy type inspect ccp-permit ! ! crypto isakmp policy 1 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group 3000client key 67Nif8LLmqP_ dns 10.171.12.37 10.171.12.5 pool dynpool acl 101 ! ! crypto ipsec transform-set myset esp-3des esp-sha-hmac ! crypto dynamic-map dynmap 10 set transform-set myset ! ! crypto map clientmap client authentication list userauthen crypto map clientmap isakmp authorization list groupauthor crypto map clientmap client configuration address initiate crypto map clientmap client configuration address respond crypto map clientmap 10 ipsec-isakmp dynamic dynmap ! ! ! ! ! interface FastEthernet0 ! ! interface FastEthernet1 ! ! interface FastEthernet2 ! ! interface FastEthernet3 ! ! interface FastEthernet4 ! ! interface FastEthernet5 ! ! interface FastEthernet6 ! ! interface FastEthernet7 ! ! interface FastEthernet8 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto ! ! interface GigabitEthernet0 description $FW_OUTSIDE$$ES_WAN$ ip address 10...* 255.255.254.0 ip nat outside ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto map clientmap ! ! interface wlan-ap0 description Service module interface to manage the embedded AP ip unnumbered Vlan1 arp timeout 0 ! ! interface Wlan-GigabitEthernet0 description Internal switch interface connecting to the embedded AP switchport trunk allowed vlan 1-3,1002-1005 switchport mode trunk ! ! interface Vlan1 description $ETH-SW-LAUNCH$$INTF-INFO-FE 1$$FW_INSIDE$ ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly zone-member security in-zone ip tcp adjust-mss 1452 crypto map clientmap ! ! interface Vlan2 description guest ip address 192.168.3.1 255.255.255.0 ip access-group 120 in ip nat inside ip virtual-reassembly zone-member security in-zone ! ! interface Async1 no ip address encapsulation slip ! ! ip local pool dynpool 192.168.1.200 192.168.1.210 ip forward-protocol nd ip http server ip http access-class 23 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! ip dns server ip nat inside source list 23 interface GigabitEthernet0 overload ip route 0.0.0.0 0.0.0.0 10.165.0.1 ! access-list 23 permit 192.168.1.0 0.0.0.255 access-list 100 remark CCP_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 10.165.0.0 0.0.1.255 any access-list 110 permit ip 192.168.0.0 0.0.5.255 any access-list 120 remark ESIGuest Restriction no cdp run ! ! ! ! ! ! control-plane ! ! alias exec dot11radio service-module wlan-ap 0 session Access point version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname ESIRouter ! no logging console enable secret 5 $1$yEH5$CxI5.9ypCBa6kXrUnSuvp1 ! aaa new-model ! ! aaa group server radius rad_eap server 192.168.1.5 auth-port 1812 acct-port 1813 ! aaa group server radius rad_acct server 192.168.1.5 auth-port 1812 acct-port 1813 ! aaa authentication login eap_methods group rad_eap aaa authentication enable default line enable aaa authorization exec default local aaa authorization commands 15 default local aaa accounting network acct_methods start-stop group rad_acct ! aaa session-id common clock timezone EST -5 clock summer-time EDT recurring ip domain name ESI ! ! dot11 syslog dot11 vlan-name one vlan 1 dot11 vlan-name two vlan 2 ! dot11 ssid one vlan 1 authentication open eap eap_methods authentication network-eap eap_methods authentication key-management wpa version 2 accounting rad_acct ! dot11 ssid two vlan 2 authentication open guest-mode ! dot11 network-map ! ! username ESIadmin privilege 15 secret 5 $1$p02C$WVHr5yKtRtQxuFxPU8NOx. ! ! bridge irb ! ! interface Dot11Radio0 no ip address no ip route-cache ! encryption vlan 1 mode ciphers aes-ccm ! broadcast-key vlan 1 change 30 ! ! ssid one ! ssid two ! antenna gain 0 station-role root ! interface Dot11Radio0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface Dot11Radio0.2 encapsulation dot1Q 2 no ip route-cache bridge-group 2 bridge-group 2 subscriber-loop-control bridge-group 2 block-unknown-source no bridge-group 2 source-learning no bridge-group 2 unicast-flooding bridge-group 2 spanning-disabled ! interface Dot11Radio1 no ip address no ip route-cache shutdown ! encryption vlan 1 mode ciphers aes-ccm ! broadcast-key vlan 1 change 30 ! ! ssid one ! antenna gain 0 dfs band 3 block channel dfs station-role root ! interface Dot11Radio1.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding bridge-group 1 spanning-disabled ! interface GigabitEthernet0 description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router no ip address no ip route-cache ! interface GigabitEthernet0.1 encapsulation dot1Q 1 native no ip route-cache bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled ! interface GigabitEthernet0.2 encapsulation dot1Q 2 no ip route-cache bridge-group 2 no bridge-group 2 source-learning bridge-group 2 spanning-disabled ! interface BVI1 ip address 192.168.1.2 255.255.255.0 no ip route-cache ! ip http server no ip http secure-server ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag access-list 10 permit 192.168.1.0 0.0.0.255 radius-server host 192.168.1.5 auth-port 1812 acct-port 1813 key ***** bridge 1 route ip

  Read the article

• How to configure fastcgi to work with ligttpd in ubuntu

  - by michael

  I am able to run lighttpd on ubuntu 9.10. But when i tried to setup fastcgi with lighttpd by putting this in the ligttpd.conf file: #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => "9098", "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", "docroot" => "/" # remote server may use # it's own docroot )) ) This is what I get in the error.log in ligttpd: 2010-03-07 21:00:11: (log.c.166) server started 2010-03-07 21:00:11: (mod_fastcgi.c.1104) the fastcgi-backend /usr/local/bin/cgi-fcgi failed to start: 2010-03-07 21:00:11: (mod_fastcgi.c.1108) child exited with status 1 /usr/local/bin/cgi-fcgi 2010-03-07 21:00:11: (mod_fastcgi.c.1111) If you're trying to run your app as a FastCGI backend, make sure you're using the FastCGI-enabled version. If this is PHP on Gentoo, add 'fastcgi' to the USE flags. 2010-03-07 21:00:11: (mod_fastcgi.c.1399) [ERROR]: spawning fcgi failed. 2010-03-07 21:00:11: (server.c.931) Configuration of plugins failed. Going down. I do have cgi-fcgi in /usr/local/bin: $ which cgi-fcgi /usr/local/bin/cgi-fcgi '/usr/local/bin/cgi-fcgi' is the executable after I download and compile fast-cgi. Here is my lighttpd conf file: $ more lighttpd.conf # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) server.port = 9090 ## bind to localhost (default: all interfaces) server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => 1026, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", #"docroot" => "/" # remote server may use # it's own docroot )) ) ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.s ocket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "ac cess plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 Thank you for your help.

  Read the article

• Cisco 800 series won't forward port

  - by sam

  Hello ServerFault, I am trying to forward port 444 from my cisco router to my Web Server (192.168.0.2). As far as I can tell, my port forwarding is configured correctly, yet no traffic will pass through on port 444. Here is my config: ! version 12.3 service config no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug uptime service timestamps log uptime service password-encryption no service dhcp ! hostname QUESTMOUNT ! logging buffered 16386 informational logging rate-limit 100 except warnings no logging console no logging monitor enable secret 5 -removed- ! username administrator secret 5 -removed- username manager secret 5 -removed- clock timezone NZST 12 clock summer-time NZDT recurring 1 Sun Oct 2:00 3 Sun Mar 3:00 aaa new-model ! ! aaa authentication login default local aaa authentication login userlist local aaa authentication ppp default local aaa authorization network grouplist local aaa session-id common ip subnet-zero no ip source-route no ip domain lookup ip domain name quest.local ! ! no ip bootp server ip inspect name firewall tcp ip inspect name firewall udp ip inspect name firewall cuseeme ip inspect name firewall h323 ip inspect name firewall rcmd ip inspect name firewall realaudio ip inspect name firewall streamworks ip inspect name firewall vdolive ip inspect name firewall sqlnet ip inspect name firewall tftp ip inspect name firewall ftp ip inspect name firewall icmp ip inspect name firewall sip ip inspect name firewall fragment maximum 256 timeout 1 ip inspect name firewall netshow ip inspect name firewall rtsp ip inspect name firewall skinny ip inspect name firewall http ip audit notify log ip audit po max-events 100 ip audit name intrusion info list 3 action alarm ip audit name intrusion attack list 3 action alarm drop reset no ftp-server write-enable ! ! ! ! crypto isakmp policy 1 authentication pre-share ! crypto isakmp policy 2 encr 3des authentication pre-share group 2 ! crypto isakmp client configuration group staff key 0 qS;,sc:q<skro1^, domain quest.local pool vpnclients acl 106 ! ! crypto ipsec transform-set tr-null-sha esp-null esp-sha-hmac crypto ipsec transform-set tr-des-md5 esp-des esp-md5-hmac crypto ipsec transform-set tr-des-sha esp-des esp-sha-hmac crypto ipsec transform-set tr-3des-sha esp-3des esp-sha-hmac ! crypto dynamic-map vpnusers 1 description Client to Site VPN Users set transform-set tr-des-md5 ! ! crypto map cm-cryptomap client authentication list userlist crypto map cm-cryptomap isakmp authorization list grouplist crypto map cm-cryptomap client configuration address respond crypto map cm-cryptomap 65000 ipsec-isakmp dynamic vpnusers ! ! ! ! interface Ethernet0 ip address 192.168.0.254 255.255.255.0 ip access-group 102 in ip nat inside hold-queue 100 out ! interface ATM0 no ip address no atm ilmi-keepalive dsl operating-mode auto ! interface ATM0.1 point-to-point pvc 0/100 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface Dialer0 bandwidth 640 ip address negotiated ip access-group 101 in no ip redirects no ip unreachables ip nat outside ip inspect firewall out ip audit intrusion in encapsulation ppp no ip route-cache no ip mroute-cache dialer pool 1 dialer-group 1 no cdp enable ppp pap sent-username -removed- password 7 -removed- ppp ipcp dns request crypto map cm-cryptomap ! ip local pool vpnclients 192.168.99.1 192.168.99.254 ip nat inside source list 105 interface Dialer0 overload ip nat inside source static tcp 192.168.0.2 444 interface Dialer0 444 ip nat inside source static tcp 192.168.0.51 9000 interface Dialer0 9000 ip nat inside source static udp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 1433 interface Dialer0 1433 ip nat inside source static tcp 192.168.0.2 25 interface Dialer0 25 ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ip http server no ip http secure-server ! ip access-list logging interval 10 logging 192.168.0.2 access-list 1 remark The local LAN. access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.0.0 access-list 2 remark Where management can be done from. access-list 2 permit 192.168.0.0 0.0.0.255 access-list 3 remark Traffic not to check for intrustion detection. access-list 3 deny 192.168.99.0 0.0.0.255 access-list 3 permit any access-list 101 remark Traffic allowed to enter the router from the Internet access-list 101 permit ip 192.168.99.0 0.0.0.255 192.168.0.0 0.0.0.255 access-list 101 deny ip 0.0.0.0 0.255.255.255 any access-list 101 deny ip 10.0.0.0 0.255.255.255 any access-list 101 deny ip 127.0.0.0 0.255.255.255 any access-list 101 deny ip 169.254.0.0 0.0.255.255 any access-list 101 deny ip 172.16.0.0 0.15.255.255 any access-list 101 deny ip 192.0.2.0 0.0.0.255 any access-list 101 deny ip 192.168.0.0 0.0.255.255 any access-list 101 deny ip 198.18.0.0 0.1.255.255 any access-list 101 deny ip 224.0.0.0 0.15.255.255 any access-list 101 deny ip any host 255.255.255.255 access-list 101 permit tcp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit tcp host 120.136.2.22 any eq 1433 access-list 101 permit tcp host 123.100.90.58 any eq 1433 access-list 101 permit udp 67.228.209.128 0.0.0.15 any eq 1433 access-list 101 permit udp host 120.136.2.22 any eq 1433 access-list 101 permit udp host 123.100.90.58 any eq 1433 access-list 101 permit tcp any any eq 444 access-list 101 permit tcp any any eq 9000 access-list 101 permit tcp any any eq smtp access-list 101 permit udp any any eq non500-isakmp access-list 101 permit udp any any eq isakmp access-list 101 permit esp any any access-list 101 permit tcp any any eq 1723 access-list 101 permit gre any any access-list 101 permit tcp any any eq 22 access-list 101 permit tcp any any eq telnet access-list 102 remark Traffic allowed to enter the router from the Ethernet access-list 102 permit ip any host 192.168.0.254 access-list 102 deny ip any host 192.168.0.255 access-list 102 deny udp any any eq tftp log access-list 102 permit ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 102 deny ip any 0.0.0.0 0.255.255.255 log access-list 102 deny ip any 10.0.0.0 0.255.255.255 log access-list 102 deny ip any 127.0.0.0 0.255.255.255 log access-list 102 deny ip any 169.254.0.0 0.0.255.255 log access-list 102 deny ip any 172.16.0.0 0.15.255.255 log access-list 102 deny ip any 192.0.2.0 0.0.0.255 log access-list 102 deny ip any 192.168.0.0 0.0.255.255 log access-list 102 deny ip any 198.18.0.0 0.1.255.255 log access-list 102 deny udp any any eq 135 log access-list 102 deny tcp any any eq 135 log access-list 102 deny udp any any eq netbios-ns log access-list 102 deny udp any any eq netbios-dgm log access-list 102 deny tcp any any eq 445 log access-list 102 permit ip 192.168.0.0 0.0.0.255 any access-list 102 permit ip any host 255.255.255.255 access-list 102 deny ip any any log access-list 105 remark Traffic to NAT access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.99.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 106 remark User to Site VPN Clients access-list 106 permit ip 192.168.0.0 0.0.0.255 any dialer-list 1 protocol ip permit ! line con 0 no modem enable line aux 0 line vty 0 4 access-class 2 in transport input telnet ssh transport output none ! scheduler max-task-time 5000 ! end any ideas? :)

  Read the article

• Intel I217LM ethernet controller not detected by Ubuntu 12.04LTS

  - by Alexandr Kurilin

  My last installation of Ubuntu 12.04 on a machine using an ASUS Q87M-E motherboard with an Intel I217LM Ethernet controller has failed to detect the ethernet card. The only thing displayed by ifconfig -a is the loopback. I double-checked in the BIOS, and the controller should be online. $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lspci 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation Lynx Point KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation Device 153a (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point HD Audio Controller (rev 04) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-Port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) $ lsmod Module Size Used by vesafb 13844 1 snd_hda_codec_realtek 224173 1 arc4 12529 2 joydev 17693 0 usbhid 47238 0 hid 99636 1 usbhid rfcomm 47604 0 rt73usb 31735 0 crc_itu_t 12707 1 rt73usb rt2x00usb 20808 1 rt73usb rt2x00lib 55326 2 rt73usb,rt2x00usb mac80211 506862 2 rt2x00usb,rt2x00lib cfg80211 205774 2 rt2x00lib,mac80211 eeepc_wmi 13109 0 bnep 18281 2 asus_wmi 24456 1 eeepc_wmi sparse_keymap 13890 1 asus_wmi psmouse 97485 0 bluetooth 180153 10 rfcomm,bnep ppdev 17113 0 snd_hda_intel 33719 6 snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi serio_raw 13211 0 snd_pcm 97275 2 snd_hda_intel,snd_hda_codec snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq parport_pc 32866 1 snd 79041 21 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device video 19651 0 soundcore 15091 1 snd wmi 19256 1 asus_wmi snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp $ ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1091 errors:0 dropped:0 overruns:0 frame:0 TX packets:1091 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:80048 (80.0 KB) TX bytes:80048 (80.0 KB) wlan0 Link encap:Ethernet HWaddr 00:fd:07:91:a8:b9 inet addr:172.16.42.4 Bcast:172.16.42.255 Mask:255.255.255.0 inet6 addr: fe80::2fd:7ff:fe91:a8b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:56644 errors:0 dropped:0 overruns:0 frame:0 TX packets:36417 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:85270918 (85.2 MB) TX bytes:3413849 (3.4 MB) additionally, running sudo lshw -C network returns: *-network UNCLAIMED description: Ethernet Controller [...] I'm pretty stumped at this point. This doesn't sound like a very uncommon ethernet controller and I figured it would be picked up by the system. Does anybody have advice for how to deal with this? Anything specific I should look into to figure out what could be causing this? Edit: It seems that following the guide on the Intel e1000e drivers page allowed the card to start working. Is this a real fix or is there a better way?

  Read the article

• Create bullet physics rigid body along the vertices of a blender model

  - by Krishnabhadra

  I am working on my first 3D game, for iphone, and I am using Blender to create models, Cocos3D game engine and Bullet for physics simulation. I am trying to learn the use of physics engine. What I have done I have created a small model in blender which contains a Cube (default blender cube) at the origin and a UVSphere hovering exactly on top of this cube (without touching the cube) I saved the file to get MyModel.blend. Then I used File -> Export -> PVRGeoPOD (.pod/.h/.cpp) in Blender to export the model to .pod format to use along with Cocos3D. In the coding side, I added necessary bullet files to my Cocos3D template project in XCode. I am also using a bullet objective C wrapper. -(void) initializeScene { _physicsWorld = [[CC3PhysicsWorld alloc] init]; [_physicsWorld setGravity:0 y:-9.8 z:0]; /*Setup camera, lamp etc.*/ .......... ........... /*Add models created in blender to scene*/ [self addContentFromPODFile: @"MyModel.pod"]; /*Create OpenGL ES buffers*/ [self createGLBuffers]; /*get models*/ CC3MeshNode* cubeNode = (CC3MeshNode*)[self getNodeNamed:@"Cube"]; CC3MeshNode* sphereNode = (CC3MeshNode*)[self getNodeNamed:@"Sphere"]; /*Those boring grey colors..*/ [cubeNode setColor:ccc3(255, 255, 0)]; [sphereNode setColor:ccc3(255, 0, 0)]; float *cVertexData = (float*)((CC3VertexArrayMesh*)cubeNode.mesh).vertexLocations.vertices; int cVertexCount = (CC3VertexArrayMesh*)cubeNode.mesh).vertexLocations.vertexCount; btTriangleMesh* cTriangleMesh = new btTriangleMesh(); // for (int i = 0; i < cVertexCount * 3; i+=3) { // printf("\n%f", cVertexData[i]); // printf("\n%f", cVertexData[i+1]); // printf("\n%f", cVertexData[i+2]); // } /*Trying to create a triangle mesh that curresponds the cube in 3D space.*/ int offset = 0; for (int i = 0; i < (cVertexCount / 3); i++){ unsigned int index1 = offset; unsigned int index2 = offset+6; unsigned int index3 = offset+12; cTriangleMesh->addTriangle( btVector3(cVertexData[index1], cVertexData[index1+1], cVertexData[index1+2] ), btVector3(cVertexData[index2], cVertexData[index2+1], cVertexData[index2+2] ), btVector3(cVertexData[index3], cVertexData[index3+1], cVertexData[index3+2] )); offset += 18; } [self releaseRedundantData]; /*Create a collision shape from triangle mesh*/ btBvhTriangleMeshShape* cTriMeshShape = new btBvhTriangleMeshShape(cTriangleMesh,true); btCollisionShape *sphereShape = new btSphereShape(1); /*Create physics objects*/ gTriMeshObject = [_physicsWorld createPhysicsObjectTrimesh:cubeNode shape:cTriMeshShape mass:0 restitution:1.0 position:cubeNode.location]; sphereObject = [_physicsWorld createPhysicsObject:sphereNode shape:sphereShape mass:1 restitution:0.1 position:sphereNode.location]; sphereObject.rigidBody->setDamping(0.1,0.8); } When I run the sphere and cube shows up fine. I expect the sphere object to fall directly on top of the cube, since I have given it a mass of 1 and the physics world gravity is given as -9.8 in y direction. But What is happening the spere rotates around cube three or times and then just jumps out of the scene. Then I know I have some basic misunderstanding about the whole process. So my question is, how can I create a physics collision shape which corresponds to the shape of a particular mesh model. I may need complex shapes than cube and sphere, but before going into them I want to understand the concepts.

  Read the article

• What Counts For a DBA: Ego

  - by Louis Davidson

  Leaving aside, for a second, Freud’s psychoanalytical definitions, the term “ego” generally refers to a person’s sense of self, and their self-esteem. In casual usage, however, it usually appears in the adjectival form, “egotistical” (most often followed by “jerk”). You don’t need to be a jerk to be a DBA; humility is important. However, ego is important too. A good DBA needs a certain degree of self-esteem…a belief and pride in what he or she can do better than anyone else can. The ideal DBA needs to be humble enough to admit when they are wrong but egotistical enough to know when they are right, and to stand up for that knowledge and make their voice heard. In most organizations, the DBA team is seriously outnumbered by headstrong developers and clock driven managers, and “great” DBAs will often be outnumbered by…well…the not so great. In order to be heard in this environment, a DBA will not only need to be very skilled, but will also need a healthy dose of ego. As Freud might have put it, the unconscious desire of the DBA (the id) is for iron-fist control over their databases, and code that runs in them. However, the ego moderates this desire, seeking to “satisfy the id in realistic ways that, in the long term, bring benefit rather than grief“. In other words, the ego understands the need to exert a measure of control and self-belief, but also to tolerate and play nicely with developers and other DBAs. The trick, naturally, is learning how to be heard when it is important, but also to make everyone around you welcome that input, even when you have to be bold to make the “I know what I am talking about, and you…well…not so much” decisions. Consider a baseball team, bottom of the ninth inning of the championship game, man on first and down one run. Almost anyone on that team will have the ability to hit a home run, but only one or two will have the iron belief that they can pull it off in this critical, end-game situation. The player you need in this situation is the one who has passionately gone the extra mile preparing for just this moment, is bursting at the seams with self-confidence, and can look the coach in the eye and state, boldly, “Put me in, I am your best bet“. Likewise, on those occasions when high customer demand coincides with copious system errors, and panic is bubbling just beneath the surface, you don’t need the minimally qualified support person, armed with the “reboot and hope” technique (though that sometimes works!). You need the DBA who steps up and says, “Put me in” and has the skill and tenacity to back up those words and to fix the pinpoint and fix the problem, whatever it takes, while keeping customers and managers happy. Of course, the egotistical DBA will happily spend hours telling you how great they are at their job, and how brilliantly they put out a previous fire, and this is no guarantee that they can deliver. However, if an otherwise-humble DBA looks you in the eye and says, “I can do it”, then hear them out. Sometimes, this burst of ego will be exactly what’s required.

  Read the article

• General website publishing questions involving domain forwarding issue

  - by Gorgeousyousuf

  Even though I have been having a certain level of knowledge and experience about web development I have never interested in obtaining a domain and publishing a website from my own server. Since today I have been struggling with getting my own domain and configuring it utilizing web sources. I started with learning the outline of web publishing process including web server installation, deploying a website for testing purpose,router port forwarding, getting a domain and forwarding domain to my router which will also forward http requests to my web server I am confused about some parts and so far could not get the web site accessed from outside of the network. All I try to do is just for learning purpose so I do not pay much attention to security issues for now. I have Server 2008 and IIS 7.5 installed. I use a laptop and have access to the modem over wireless and my modem is Zoom x6 5590. Well I will continue explaining what I have done so far and what I think will be after each action I did, I have successfully had access to my website on any local computer entering the internal ip address and port pair of the host machine in a browser. Next, I forwarded port 80 of my host machine creating a virtual server like 10.0.0.x(internal ip(static) of the host) - tcp - start port : 80 - end port : 80 in router options. Now I suppose every request that will come to the public Ip on port 80 will be forwarded to my host machine(10.0.0.x) over port 80. So If everyhing went as desired, the website listening on port 80 will accept the request and process the issue and finally respond bla bla bla... I suppose to access my website from outside of the network by entering http://MyPublicIp:80 in a browser but I couldn't accomplish this task by now despite using godady's domain forwarding tool,I see a small view of my website when I click the "preview" button that checks whether the address(http://publicip/Index.aspx) I entered where my domain will be forwarded is available or not. I am sure that configuring domain does not play a role in solving such a problem since using public ip and port matching does not help. So here is the first question, What is the fact that I face this problem? After that, I have couple of question regarding domain forwarding using godaddy tool. Can I forward my domain to a any port for example port 8080 other than default http port 80? Additionally, can I use a sub-domain to forward to a different port of the host? What I want to design is if the client enters www.mydomain.com, website1 will respond over a specified port and after when a client enters info.mydomain.com, another website which listens on different port will respond. I tried to add a sub-domain and forward it to a address like http://www.mydomain.com:8080/Index.aspx with no success. Can I really do that? Finally, what if I have a ftp site listening on the default port 21 and I create a domain like ftp.mydomain.com that will forward to that ftp site address. Is it possible to use sub-domains for ftp site access? I know I am more than confused but no matter whatever and however you reply to me, you will help me have a more clear view on this subject. Thank you very much from now.

  Read the article

• cannot access a site from Mac OSX Lion but can from other machines on network?

  - by house9

  SOLVED: The issue is with the hamachi client, hamachi is hi-jacking all of the 5.0.0.0/8 address block http://en.wikipedia.org/wiki/Hamachi_(software)#Criticism http://b.logme.in/2012/11/07/changes-to-hamachi-on-november-19th/ The fix on Mac LogMeIn Hamachi Preferences Settings Advanced Peer Connections IP protocol mode IPv6 only (default is both) If you can only connect to some of your network over IPv4 this 'fix' will NOT work for you ----- A few weeks ago I started using a service - https://semaphoreapp.com I think they made DNS changes a week ago and ever since I cannot access the site from my Mac OSX Lion (10.7.4) machine (my main development machine) but I can access the site from other machines on my network ipad windows machine MacMini (10.6.8) After some google searching I tried both of these dscacheutil -flushcache sudo killall -HUP mDNSResponder but no go, I've contacted semaphoreapp as well, but nothing so far - also of interest, one of my colleagues has the exact same problem, cannot access via Mac OSX Lion but can via windows machine, we work remotely and are not on the same ISP some additional info Lion (10.7.4) cannot access site host semaphoreapp.com semaphoreapp.com has address 5.9.53.16 ping semaphoreapp.com PING semaphoreapp.com (5.9.53.16): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 Request timeout for icmp_seq 3 ping: sendto: No route to host Request timeout for icmp_seq 4 ping: sendto: Host is down Request timeout for icmp_seq 5 ping: sendto: Host is down Request timeout for icmp_seq 6 ping: sendto: Host is down Request timeout for icmp_seq 7 .... traceroute semaphoreapp.com traceroute to semaphoreapp.com (5.9.53.16), 64 hops max, 52 byte packets 1 * * * 2 * * * traceroute: sendto: No route to host 3 traceroute: wrote semaphoreapp.com 52 chars, ret=-1 *traceroute: sendto: Host is down traceroute: wrote semaphoreapp.com 52 chars, ret=-1 .... and MacMini (10.6.8) can access it host semaphoreapp.com semaphoreapp.com has address 5.9.53.16 ping semaphoreapp.com PING semaphoreapp.com (5.9.53.16): 56 data bytes 64 bytes from 5.9.53.16: icmp_seq=0 ttl=44 time=191.458 ms 64 bytes from 5.9.53.16: icmp_seq=1 ttl=44 time=202.923 ms 64 bytes from 5.9.53.16: icmp_seq=2 ttl=44 time=180.746 ms 64 bytes from 5.9.53.16: icmp_seq=3 ttl=44 time=200.616 ms 64 bytes from 5.9.53.16: icmp_seq=4 ttl=44 time=178.818 ms .... traceroute semaphoreapp.com traceroute to semaphoreapp.com (5.9.53.16), 64 hops max, 52 byte packets 1 192.168.0.1 (192.168.0.1) 1.677 ms 1.446 ms 1.445 ms 2 * LOCAL ISP 11.957 ms * 3 etc... 10.704 ms 14.183 ms 9.341 ms 4 etc... 32.641 ms 12.147 ms 10.850 ms 5 etc.... 44.205 ms 54.563 ms 36.243 ms 6 vlan139.car1.seattle1.level3.net (4.53.145.165) 50.136 ms 45.873 ms 30.396 ms 7 ae-32-52.ebr2.seattle1.level3.net (4.69.147.182) 31.926 ms 40.507 ms 49.993 ms 8 ae-2-2.ebr2.denver1.level3.net (4.69.132.54) 78.129 ms 59.674 ms 49.905 ms 9 ae-3-3.ebr1.chicago2.level3.net (4.69.132.62) 99.019 ms 82.008 ms 76.074 ms 10 ae-1-100.ebr2.chicago2.level3.net (4.69.132.114) 96.185 ms 75.658 ms 75.662 ms 11 ae-6-6.ebr2.washington12.level3.net (4.69.148.145) 104.322 ms 105.563 ms 118.480 ms 12 ae-5-5.ebr2.washington1.level3.net (4.69.143.221) 93.646 ms 99.423 ms 96.067 ms 13 ae-41-41.ebr2.paris1.level3.net (4.69.137.49) 177.744 ms ae-44-44.ebr2.paris1.level3.net (4.69.137.61) 199.363 ms 198.405 ms 14 ae-47-47.ebr1.frankfurt1.level3.net (4.69.143.141) 176.876 ms ae-45-45.ebr1.frankfurt1.level3.net (4.69.143.133) 170.994 ms ae-46-46.ebr1.frankfurt1.level3.net (4.69.143.137) 177.308 ms 15 ae-61-61.csw1.frankfurt1.level3.net (4.69.140.2) 176.769 ms ae-91-91.csw4.frankfurt1.level3.net (4.69.140.14) 178.676 ms 173.644 ms 16 ae-2-70.edge7.frankfurt1.level3.net (4.69.154.75) 180.407 ms ae-3-80.edge7.frankfurt1.level3.net (4.69.154.139) 174.861 ms 176.578 ms 17 as33891-net.edge7.frankfurt1.level3.net (195.16.162.94) 175.448 ms 185.658 ms 177.081 ms 18 hos-bb1.juniper4.rz16.hetzner.de (213.239.240.202) 188.700 ms 190.332 ms 188.196 ms 19 hos-tr4.ex3k14.rz16.hetzner.de (213.239.233.98) 199.632 ms hos-tr3.ex3k14.rz16.hetzner.de (213.239.233.66) 185.938 ms hos-tr2.ex3k14.rz16.hetzner.de (213.239.230.34) 182.378 ms 20 * * * 21 * * * 22 * * * any ideas? EDIT: adding tcpdump MacMini (which can connect) while running - ping semaphoreapp.com sudo tcpdump -v -i en0 dst semaphoreapp.com Password: tcpdump: listening on en0, link-type EN10MB (Ethernet), capture size 65535 bytes 17:33:03.337165 IP (tos 0x0, ttl 64, id 20153, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->3129)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 0, length 64 17:33:04.337279 IP (tos 0x0, ttl 64, id 26049, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->1a21)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 1, length 64 17:33:05.337425 IP (tos 0x0, ttl 64, id 47854, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->c4f3)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 2, length 64 17:33:06.337548 IP (tos 0x0, ttl 64, id 24772, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->1f1e)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 3, length 64 17:33:07.337670 IP (tos 0x0, ttl 64, id 8171, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->5ff7)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 4, length 64 17:33:08.337816 IP (tos 0x0, ttl 64, id 35810, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->f3ff)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 5, length 64 17:33:09.337948 IP (tos 0x0, ttl 64, id 31120, offset 0, flags [none], proto ICMP (1), length 84, bad cksum 0 (->652)!) 192.168.0.6 > static.16.53.9.5.clients.your-server.de: ICMP echo request, id 61918, seq 6, length 64 ^C 7 packets captured 1047 packets received by filter 0 packets dropped by kernel OSX Lion (cannot connect) while running - ping semaphoreapp.com # wireless ~ $ sudo tcpdump -v -i en1 dst semaphoreapp.com Password: tcpdump: listening on en1, link-type EN10MB (Ethernet), capture size 65535 bytes ^C 0 packets captured 262 packets received by filter 0 packets dropped by kernel and # wired ~ $ sudo tcpdump -v -i en0 dst semaphoreapp.com tcpdump: listening on en0, link-type EN10MB (Ethernet), capture size 65535 bytes ^C 0 packets captured 219 packets received by filter 0 packets dropped by kernel above output after Request timeout for icmp_seq 25 or 30 times from ping. I don't know much about tcpdump, but to me it doesn't seem like the ping requests are leaving my machine?

  Read the article

• Drawing texture does not work anymore with a small amount of triangles

  - by Paul

  When i draw lines, the vertices are well connected. But when i draw the texture inside the triangles, it only works with i<4 in the for loop, otherwise with i<5 for example, there is a EXC_BAD_ACCESS message, at @synthesize textureImage = _textureImage. I don't understand why. (The generatePolygons method seems to work fine as i tried to draw lines with many vertices as in the second image below. And textureImage remains the same for i<4 or i<5 : it's a 512px square image). Here are the images : What i want to achieve is to put the red points and connect them to the y-axis (the green points) and color the area (the green triangles) : If i only draw lines, it works fine : Then with a texture color, it works for i<4 in the loop (the red points in my first image, plus the fifth one to connect the last y) : But then, if i set i<5, the debug tool says EXC_BAD_ACCESS at the synthesize of _textureImage. Here is my code : I set a texture color in HelloWordLayer.mm with : CCSprite *textureImage = [self spriteWithColor:color3 textureSize:512]; _terrain.textureImage = textureImage; Then in the class Terrain, i create the vertices and put the texture in the draw method : @implementation Terrain @synthesize textureImage = _textureImage; //EXC_BAD_ACCESS for i<5 - (void)generatePath2{ CGSize winSize = [CCDirector sharedDirector].winSize; float x = 40; float y = 0; for(int i = 0; i < kMaxKeyPoints+1; ++i) { _hillKeyPoints[i] = CGPointMake(x, y); x = 150 + (random() % (int) 30); y += 30; } } -(void)generatePolygons{ _nPolyVertices = 0; float x1 = 0; float y1 = 0; int keyPoints = 0; for (int i=0; i<4; i++){ /* HERE : 4 = OK / 5 = crash */ //V0: at (0,0) _polyVertices[_nPolyVertices] = CGPointMake(x1, y1); _polyTexCoords[_nPolyVertices++] = CGPointMake(x1, y1); //V1: to the first "point" _polyVertices[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices++] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); keyPoints++; //from point at index 0 to 1 //V2, same y as point n°2: _polyVertices[_nPolyVertices] = CGPointMake(0, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices++] = CGPointMake(0, _hillKeyPoints[keyPoints].y); //V1 again _polyVertices[_nPolyVertices] = _polyVertices[_nPolyVertices-2]; _polyTexCoords[_nPolyVertices++] = _polyVertices[_nPolyVertices-2]; //V2 again _polyVertices[_nPolyVertices] = _polyVertices[_nPolyVertices-2]; _polyTexCoords[_nPolyVertices++] = _polyVertices[_nPolyVertices-2]; //V3 = same x,y as point at index 1 _polyVertices[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); _polyTexCoords[_nPolyVertices] = CGPointMake(_hillKeyPoints[keyPoints].x, _hillKeyPoints[keyPoints].y); y1 = _polyVertices[_nPolyVertices].y; _nPolyVertices++; } } - (id)init { if ((self = [super init])) { [self generatePath2]; [self generatePolygons]; } return self; } - (void) draw { //glDisable(GL_TEXTURE_2D); glDisableClientState(GL_COLOR_ARRAY); glDisableClientState(GL_TEXTURE_COORD_ARRAY); glBindTexture(GL_TEXTURE_2D, _textureImage.texture.name); glColor4f(1, 1, 1, 1); glVertexPointer(2, GL_FLOAT, 0, _polyVertices); glTexCoordPointer(2, GL_FLOAT, 0, _polyTexCoords); glDrawArrays(GL_TRIANGLE_STRIP, 0, (GLsizei)_nPolyVertices); glColor4f(1, 1, 1, 1); for(int i = 1; i < 40; ++i) { ccDrawLine(_polyVertices[i-1], _polyVertices[i]); } // restore default GL states glEnable(GL_TEXTURE_2D); glEnableClientState(GL_COLOR_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); } Do you see anything wrong in this code? Thanks for your help

  Read the article

• New Version 3.1 Endeca Information Discovery Now Available

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 Business User Self-Service Data Mash-up Analysis and Discovery integrated with OBI11g and Hadoop Oracle Endeca Information Discovery 3.1 (OEID) is a major release that incorporates significant new self-service discovery capabilities for business users, including agile data mashup, extended support for unstructured analytics, and an even tighter integration with Oracle BI.  · Self-Service Data Mashup and Discovery Dashboards: business users can combine information from multiple sources, including their own up-loaded spreadsheets, to conduct analysis on the complete set.  Creating discovery dashboards has been made even easier by intuitive drag-and drop layouts and wizard-based configuration.  Business users can now build new discovery applications in minutes, without depending on IT. · Enhanced Integration with Oracle BI: OEID 3.1 enhances its’ native integration with Oracle Business Intelligence Foundation. Business users can now incorporate information from trusted BI warehouses, leveraging dimensions and attributes defined in Oracle’s Common Enterprise Information Model, but evolve them based on the varying day-to-day demands and requirements that they personally manage. · Deep Unstructured Analysis: business users can gain new insights from a wide variety of enterprise and public sources, helping companies to build an actionable Big Data strategy.  With OEID’s long-standing differentiation in correlating unstructured information with structured data, business users can now perform their own text mining to identify hidden concepts, without having to request support from IT. They can augment these insights with best in class keyword search and pattern matching, all in the context of rich, interactive visualizations and analytic summaries. · Enterprise-Class Self-Service Discovery:  OEID 3.1 enables IT to provide a powerful self-service platform to the business as part of a broader Business Analytics strategy, preserving the value of existing investments in data quality, governance, and security.  Business users can take advantage of IT-curated information to drive discovery across high volumes and varieties of data, and share insights with colleagues at a moment’s notice. · Harvest Content from the Web with the Endeca Web Acquisition Toolkit:  Oracle now provides best-of-breed data access to website content through the Oracle Endeca Web Acquisition Toolkit.  This provides an agile, graphical interface for developers to rapidly access and integrate any information exposed through a web front-end.  Organizations can now cost-effectively include content from consumer sites, industry forums, government or supplier portals, cloud applications, and myriad other web sources as part of their overall strategy for data discovery and unstructured analytics. For more information: OEID 3.1 OTN Software and Documentation Download And Endeca available for download on Software Delivery Cloud (eDelivery) New OEID 3.1 Videos on YouTube Oracle.com Endeca Site /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

  Read the article

• How to upgrade a remote server from 8.10 to newer version?

  - by DisgruntledGoat

  I have a remote server still running Ubuntu 8.10 9.04 that I can only access via SSH. If I run apt-get update I get a bunch of 404 errors on the packages. I've asked a few questions on Server Fault but got nowhere. Here's what I've done: Run apt-get update which returns errors like: Err http://gb.archive.ubuntu.com intrepid/main Packages 404 Not Found [and same for many other packages] Run do-release-upgrade which returns: Checking for a new ubuntu release Failed Upgrade tool signature Failed Upgrade tool Done downloading extracting 'jaunty.tar.gz' Failed to extract Extracting the upgrade failed. There may be a problem with the network or with the server. Edited /etc/update-manager/release-upgrades and changed from Prompt=normal to Prompt=lts (as suggested here). Running do-release-upgrade after this returns: Checking for a new ubuntu release current dist not found in meta-release file No new release found (Updated) I have followed the advice in this question and changed /etc/apt/sources.list to refer to jaunty instead of intrepid. However, that distro is not online anymore either. A comment there says I have to upgrade in chronological order... So basically, it seems like I cannot upgrade because my current distro is out of date and not supported. Is there a way to upgrade direct to 10.x or 11.x? Note, as this is a server I only have command-line access. UPDATE 24/11: I have managed to upgrade from 8.10 to 9.04. Ubuntu's EOL Upgrades page provides some alternate URLs for apt sources. I also needed to update /var/lib/update-manager/meta-release to point to the old-releases server too. However, now I cannot upgrade from 9.04 to 9.10. Running do-release-upgrade produces the same error as #2 above, except it "Failed to fetch" (the URLs in meta-release are valid). The Ubuntu Jaunty upgrade page says it's necessary to upgrade using a CD image. I followed the instructions here, but it didn't work: A fatal error occurred Please report this as a bug and include the files /var/log/dist-upgrade/main.log and /var/log/dist-upgrade/apt.log in your report. The upgrade is now aborted. Your original sources.list was saved in /etc/apt/sources.list.distUpgrade. Traceback (most recent call last): File "/tmp/tmp.JLhTwVUugb/karmic", line 7, in sys.exit(main()) File "/tmp/tmp.JLhTwVUugb/DistUpgradeMain.py", line 132, in main if app.run(): File "/tmp/tmp.JLhTwVUugb/DistUpgradeController.py", line 1590, in run return self.fullUpgrade() File "/tmp/tmp.JLhTwVUugb/DistUpgradeController.py", line 1506, in fullUpgrade if not self.doPostInitialUpdate(): File "/tmp/tmp.JLhTwVUugb/DistUpgradeController.py", line 762, in doPostInitialUpdate self.quirks.run("PostInitialUpdate") File "/tmp/tmp.JLhTwVUugb/DistUpgradeQuirks.py", line 83, in run for plugin in self.plugin_manager.get_plugins(condition): File "/tmp/tmp.JLhTwVUugb/computerjanitor/plugin.py", line 167, in get_plugins filenames = self.get_plugin_files() File "/tmp/tmp.JLhTwVUugb/computerjanitor/plugin.py", line 120, in get_plugin_files basenames = [x for x in os.listdir(dirname) OSError: [Errno 2] No such file or directory: './plugins' It does say to report the bug, but since this is an old unsupported release I don't know if it's worth doing. However, is there a way round this, to upgrade from 9.04 to 9.10 (And then finally to 10.04 LTS.)

  Read the article

• Problem with video playback on iPad with MPMoviePlayerViewController

  - by Symo

  Hello everybody... I have been fighting some code for about a week, and am hoping that someone else may have experienced this problem and can point me in the right direction. I am using the MPMoviePlayerViewController to play a video on the iPad. The primary problem is that it works FLAWLESSLY on the iPad Simulator, but will not play at all on the iPad. I have tried re-encoding the video to make sure that isn't an issue. The video I'm using is currently a 480x360 video encoded with H.264 Basline 3.0 with AAC/LC audio. The video plays fine on the iPhone, and also does play through Safari on the iPad. The video actually loads, and you can scrub through the video with the scrubber bar and see that it is there. The frames actually display, but just will not play. If you click play, it just immediately stops. Even when I have mp.moviePlayer.shouldAutoplay=YES set, you can see the player attempt to play, but only for a split second (maybe 1 frame?). I have tried just adding view with the following code: in .h ------ MPMoviePlayerViewController *vidViewController; @property (readwrite, retain) MPMoviePlayerViewController *vidViewController; in .m ------ MPMoviePlayerViewController *mp=[[MPMoviePlayerViewController alloc] initWithContentURL:[NSURL URLWithString:videoURL]]; [mp shouldAutorotateToInterfaceOrientation:YES]; mp.moviePlayer.scalingMode=MPMovieScalingModeAspectFit; mp.moviePlayer.shouldAutoplay=YES; mp.moviePlayer.controlStyle=MPMovieControlStyleFullscreen; [videoURL release]; self.vidViewController = mp; [mp release]; [self.view addSubview:vidViewController.view]; float w = self.view.frame.size.width; float h = w * 0.75; self.vidViewController.view.frame = CGRectMake(0, 0, w, h); I have also just tried to do a: [self presentMoviePlayerViewControllerAnimated:self.vidViewController]; which I actually can not get to orient properly...always shows up in Portrait and almost completely off the screen on the bottom, and the app is only intended to run in either of the Landscape views... If anybody needs more info, just let me know. I'm about at my wits end on this. ANY help will be GREATLY appreciated.

  Read the article

• 64-bit Windows CE 5.0 Emulator

  - by FreshCode

  When attempting to run the Windows CE 5.0 emulator on my 64-bit system, I get the following error: "Emulator for Windows CE is incompatible with the host operating system. Emulator for CE will not run on 64-bit host operating systems.64-bit host operating systems." How can I run the Windows CE 5.0 Emulator under 64-bit Windows 7 without resorting to a VM?

  Read the article

• Path Not Found error when opening VB6 project from a shared folder on Virtual PC 2007 (XP sp3)

  - by law1185

  I currently work on a small software team that primarily maintains legacy software. I am trying to set up a VirtualPC that we can use to do this maintenance. Specifically, I would like to be able to debug and run VB6 web apps from a folder on the host pc. My constraints are as follows: The VirtualPC will not be registered on the domain. The server that hosts our Subversion repository does not run the subversion service so the only way to interact with the repository is through "file:\\", which requires domain authentication. It is not possible to debug/run VB6 web apps that are located on mapped network drives, because IIS requires that the VirtualPC be on the same domain as the network drive I would like to avoid having to copy the folder from the host pc to the VirtualPC and then copying it back in order to have the latest revision from Subversion So, I am trying to use VirtualPC's shared folder feature to share the host machine's Subversion directory and open the project in VB6 on the VirtualPC. Problem is that Visual Basic throws the error: "Path not found: '\\C:\\Subversion\Path\Project.vbp'" when I try to open it. Folder C:\Subversion on the host machine is mapped to G: on the VirtualPC. If anyone can help me resolve this error or find some other way to accomplish this, I would be deeply grateful. Oh, both host and virtual OS is Windows XP sp3. Using VB 6.0, IIS v5.1. I can manipulate files in the shared directory freely from the VirtualPC ie. copy, paste, delete, etc. Edit: Link to screenshot: http://img190.imageshack.us/img190/5439/vpcscreen.png

  Read the article

• How can I do vertical paging with UITableView?

  - by vodkhang

  Let me describe the situation I am trying to do: I have a list of Items. When I go into ItemDetailView, which is a UITableView. I want to do paging here like: When I scroll down out of the table view, I want to display the next item. Like in Good Reader: Currently, I am trying 2 approaches but both do not really work for me. 1st: I let my UITableView over my scroll view and I have a nice animation and works quite ok except sometimes, the UITableView will receive event instead of my scroll view. And because, a UITableView is already a UITableView, this approach seems not be a good idea. Here is some code: - (void)applicationDidFinishLaunching:(UIApplication *)application { // a page is the width of the scroll view scrollView.pagingEnabled = YES; scrollView.contentSize = CGSizeMake(scrollView.frame.size.width, scrollView.frame.size.height * kNumberOfPages); scrollView.showsHorizontalScrollIndicator = NO; scrollView.showsVerticalScrollIndicator = YES; scrollView.scrollsToTop = NO; scrollView.delegate = self; [self loadScrollViewWithPage:0]; } - (void)loadScrollViewWithPage:(int)page { if (page < 0) return; if (page >= kNumberOfPages) return; [self.currentViewController.view removeFromSuperview]; self.currentViewController = [[[MyNewTableView alloc]initWithPageNumber:page] autorelease]; if (nil == currentViewController.view.superview) { CGRect frame = scrollView.frame; [scrollView addSubview:currentViewController.view]; } } - (void)scrollViewDidScroll:(UIScrollView *)sender { if (pageControlUsed) { return; } CGFloat pageHeight = scrollView.frame.size.height; int page = floor((scrollView.contentOffset.y - pageHeight / 2) / pageHeight) + 1; [self loadScrollViewWithPage:page]; } - (IBAction)changePage:(id)sender { int page = pageControl.currentPage; [self loadScrollViewWithPage:page]; // update the scroll view to the appropriate page CGRect frame = scrollView.frame; [scrollView scrollRectToVisible:frame animated:YES]; pageControlUsed = YES; } My second approach is: using pop and push of navigationController to pop the current ItemDetail and push a new one on top of it. But this approach will not give me a nice animation of scrolling down like the first approach. So, the answer to how I can get it done with either approach will be appreciated

  Read the article

• iPhone: how to use performSelector:onThread:withObject:waitUntilDone: method?

  - by Michael Kessler

  Hi all, I am trying to use a separate thread for working with some API. The problem is that I am not able to use performSelector:onThread:withObject:waitUntilDone: method with a thread that I' instantiated for this. My code: @interface MyObject : NSObject { NSThread *_myThread; } @property(nonatomic, retain) NSThread *myThread; @end @implementation MyObject @synthesize myThread = _myThread; - (NSThread *)myThread { if (_myThread == nil) { NSThread *myThreadTemp = [[NSThread alloc] init]; [myThreadTemp start]; self. myThread = myThreadTemp; [myThreadTemp release]; } return _myThread; } - (id)init { if (self = [super init]) { [self performSelector:@selector(privateInit:) onThread:[self myThread] withObject:nil waitUntilDone:NO]; } return self; } - (void)privateInit:(id)object { NSLog(@"MyObject - privateInit start"); } - (void)dealloc { [_myThread release]; _myThread = nil; [super dealloc]; } @end "MyObject - privateInit start" is never printed. What am I missing? I tried to instantiate the thread with target and selector, tried to wait for method execution completion (waitUntilDone:YES). Nothing helps. UPDATE: I don't need this multithreading for separating costly operations to another thread. In this case I could use the performSelectorInBackground as mentioned in few answers. The main reason for this separate thread is the need to perform all the actions in the API (TTS by Loquendo) from one single thread. Meaning that I have to create an instance of the TTS object and call methods on that object from the same thread all the time.

  Read the article

• How to resovle javax.mail.AuthenticationFailedException issue?

  - by jl

  Hi, I am doing a sendMail Servlet with JavaMail. I have javax.mail.AuthenticationFailedException on my output. Can anyone please help me out? Thanks. sendMailServlet code: try { String host = "smtp.gmail.com"; String from = "[email protected]"; String pass = "pass"; Properties props = System.getProperties(); props.put("mail.smtp.starttls.enable", "true"); props.put("mail.smtp.host", host); props.put("mail.smtp.user", from); props.put("mail.smtp.password", pass); props.put("mail.smtp.port", "587"); props.put("mail.smtp.auth", "true"); props.put("mail.debug", "true"); Session session = Session.getDefaultInstance(props, null); MimeMessage message = new MimeMessage(session); Address fromAddress = new InternetAddress(from); Address toAddress = new InternetAddress("[email protected]"); message.setFrom(fromAddress); message.setRecipient(Message.RecipientType.TO, toAddress); message.setSubject("Testing JavaMail"); message.setText("Welcome to JavaMail"); Transport transport = session.getTransport("smtp"); transport.connect(host, from, pass); message.saveChanges(); Transport.send(message); transport.close(); }catch(Exception ex){ out.println("<html><head></head><body>"); out.println("ERROR: " + ex); out.println("</body></html>"); } Output on GlassFish 2.1: DEBUG SMTP: trying to connect to host "smtp.gmail.com", port 587, isSSL false 220 mx.google.com ESMTP 36sm10907668yxh.13 DEBUG SMTP: connected to host "smtp.gmail.com", port: 587 EHLO platform-4cfaca 250-mx.google.com at your service, [203.126.159.130] 250-SIZE 35651584 250-8BITMIME 250-STARTTLS 250-ENHANCEDSTATUSCODES 250 PIPELINING DEBUG SMTP: Found extension "SIZE", arg "35651584" DEBUG SMTP: Found extension "8BITMIME", arg "" DEBUG SMTP: Found extension "STARTTLS", arg "" DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg "" DEBUG SMTP: Found extension "PIPELINING", arg "" STARTTLS 220 2.0.0 Ready to start TLS EHLO platform-4cfaca 250-mx.google.com at your service, [203.126.159.130] 250-SIZE 35651584 250-8BITMIME 250-AUTH LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250 PIPELINING DEBUG SMTP: Found extension "SIZE", arg "35651584" DEBUG SMTP: Found extension "8BITMIME", arg "" DEBUG SMTP: Found extension "AUTH", arg "LOGIN PLAIN" DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg "" DEBUG SMTP: Found extension "PIPELINING", arg "" DEBUG SMTP: Attempt to authenticate AUTH LOGIN 334 VXNlcm5hbWU6 aWpveWNlbGVvbmdAZ21haWwuY29t 334 UGFzc3dvcmQ6 MTIzNDU2Nzhf 235 2.7.0 Accepted DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc] DEBUG SMTP: useEhlo true, useAuth true

  Read the article

• iphone custom navigation bar edit button

  - by Sarah

  Hi all, I use custom image for my navigation bar buttons using the following code, that allows me to make custom add button. I want to be able to do the same for the edit button item. UIImage *image=[UIImage imageNamed:@"Plus.png"]; UIButton *button = [UIButton buttonWithType:UIButtonTypeCustom]; button.bounds = CGRectMake( 0, 0, image.size.width, image.size.height ); [button setBackgroundImage:image forState:UIControlStateNormal]; [button addTarget:self action:@selector(add) forControlEvents:UIControlEventTouchUpInside]; UIBarButtonItem *barButtonItem = [[UIBarButtonItem alloc] initWithCustomView:button]; self.navigationItem.rightBarButtonItem = barButtonItem; [barButtonItem release]; self.navigationItem.leftBarButtonItem = self.editButtonItem; I'm doing this because I want to change the button text color.I would appreciate your help, Sarah

  Read the article

• Is there a publicly available CDN that hosts JSON2?

  - by Xavi

  It's well known that Google and Microsoft host several common javascript libraries on their CDNs (content distribution networks). Unfortunately neither seems to host JSON2.js. I'm aware that I could upload a copy of JSON2.js to my server and serve it myself, but there are a number advantages CDNs offer that I would like to take advantage of. So with that in mind, are there any publicly available CDNs that host JSON2? If not, any idea why?

  Read the article

• How to hide UIStatusBar and show UINavigationBar at the top when UIView changes to LandscapeOrientat

  - by KayKay

  I am using two views (portraitView and landscapeView) loaded from xib in a viewcontroller for different InterfaceOrientation each for Portrait and Landscape mode. The view in portrait mode has statusbar and navigationbar and other one has just the navigationbar. The problem is that even i made statusbar hidden programatically the view in Landscape mode has blank space left at the position of statusbar and below is navigationbar which is for sure looking embarrassing. Is it possible to put the navigationbar at the top - replacing the statusbar position. I tried many options like. if (interfaceOrientation == UIInterfaceOrientationLandscapeLeft || interfaceOrientation == UIInterfaceOrientationLandscapeRight) { [[UIApplication sharedApplication] setStatusBarHidden:YES animated:NO]; self.navigationController.navigationBarHidden = NO; [[self view] setFrame:CGRectMake(0, 0, 480, 320)]; self.navigationController.wantsFullScreenLayout = YES; self.view = self.landscapeView; } But despite all this efforts it only lefts the same 20x480 pixels blank space and below it navigationbar. But here there is no end to trouble when I switch back to portraitView, the navigation bar hides behind the statusbar mere showing remaining 320x(44-20)px on top. Please help and thanks in advance.

  Read the article

• popView from UITabBarController inside UINavigationController

  - by Manu

  Hi, I'm building an application based on the Utility template from Xcode, to which I have added some more views. My application structure would be as follows: MainView (the app menu) Flip-side view (a calculator) UINavigationController Settings view viewDiDLoad: UITabBarController - Tab1 view (options) - Tab2 view (information text) I can navigate correctly from my MainView to my Flip-side view, which is also the root view of the Navigation Controller. From my Flip-side view, I push a second view of my Navigation Controller (Settings view) that is configured to show an UITabBarController, with two tabs, as soon as it loads (with viewDidLoad). If I remove the UITabBarController, I can return with no problems to my Flip-side view using "popViewController" from my Settings view. The problem comes if I load the UITabBarController in viewDiDLoad in my Settings view... the tabs work perfectly, but I'm not able to return to my Flip-side view (root view of the Navigation Controller) anymore. I CAN return if I use the Navigation Bar of the Navigation Controller, but I want to configure my own buttons and have the Navigation Bar hidden. So far I've tried the following methods: [self.navigationController popViewControllerAnimated:YES]; [self.navigationController popToRootViewControllerAnimated:YES]; [self.navigationController popToViewController:FlipSideViewController animated:YES]; But they don't seem to work. The first two just do nothing (the screen remains as it was), and the third one does not recognize the "FlipsideViewController" (maybe because it's a delegate of the MainViewController?). Is there a way to check what is exactly doing the "back" button of the Navigation Bar if I activate it? Should I be using delegates? Can I call a popViewController method in my Settings view from any of the two Tab views? This is my Flip-side view: - (IBAction)showSettingsView { SettingsViewController *controller = [[SettingsViewController alloc] initWithNibName:@"SettingsView" bundle:nil]; controller.title = @"Settings"; [self.navigationController pushViewController:controller animated:YES]; [controller release]; } This is my Settings view: - (void)viewDidLoad { [super viewDidLoad]; tabBarController = [[UITabBarController alloc] init]; Tab1ViewController* vc1 = [[Tab1ViewController alloc] init]; Tab2ViewController* vc2 = [[Tab2ViewController alloc] init]; NSArray* controllers = [NSArray arrayWithObjects:vc1, vc2, nil]; tabBarController.viewControllers = controllers; [self.view addSubview:tabBarController.view]; } And the method to return in one of the Tab views: - (IBAction)backFromTab1View { [self.navigationController popToViewController:FlipSideViewController animated:YES]; } Thanks very much and sorry if the question is too basic!

  Read the article

• iphone: Help with AudioToolbox Leak: Stack trace/code included here...

  - by editor guy

  Part of this app is a "Scream" button that plays random screams from cast members of a TV show. I have to bang on the app quite a while to see a memory leak in Instruments, but it's there, occasionally coming up (every 45 seconds to 2 minutes.) The leak is 3.50kb when it occurs. Haven't been able to crack it for several hours. Any help appreciated. Instruments says this is the offending code line: [appSoundPlayer play]; that's linked to from line 9 of the below stack trace: 0 libSystem.B.dylib malloc 1 libSystem.B.dylib pthread_create 2 AudioToolbox CAPThread::Start() 3 AudioToolbox GenericRunLoopThread::Start() 4 AudioToolbox AudioQueueNew(bool, AudioStreamBasicDescription const*, TCACallback const&, CACallbackTarget const&, unsigned long, OpaqueAudioQueue*) 5 AudioToolbox AudioQueueNewOutput 6 AVFoundation allocAudioQueue(AVAudioPlayer, AudioPlayerImpl*) 7 AVFoundation prepareToPlayQueue(AVAudioPlayer*, AudioPlayerImpl*) 8 AVFoundation -[AVAudioPlayer prepareToPlay] 9 Scream Queens -[ScreamViewController scream:] /Users/laptop2/Desktop/ScreamQueens Versions/ScreamQueens25/Scream Queens/Classes/../ScreamViewController.m:210 10 CoreFoundation -[NSObject performSelector:withObject:withObject:] 11 UIKit -[UIApplication sendAction:to:from:forEvent:] 12 UIKit -[UIApplication sendAction:toTarget:fromSender:forEvent:] 13 UIKit -[UIControl sendAction:to:forEvent:] 14 UIKit -[UIControl(Internal) _sendActionsForEvents:withEvent:] 15 UIKit -[UIControl touchesEnded:withEvent:] 16 UIKit -[UIWindow _sendTouchesForEvent:] 17 UIKit -[UIWindow sendEvent:] 18 UIKit -[UIApplication sendEvent:] 19 UIKit _UIApplicationHandleEvent 20 GraphicsServices PurpleEventCallback 21 CoreFoundation CFRunLoopRunSpecific 22 CoreFoundation CFRunLoopRunInMode 23 GraphicsServices GSEventRunModal 24 UIKit -[UIApplication _run] 25 UIKit UIApplicationMain 26 Scream Queens main /Users/laptop2/Desktop/ScreamQueens Versions/ScreamQueens25/Scream Queens/main.m:14 27 Scream Queens start Here's .h: #import <UIKit/UIKit.h> #import <AVFoundation/AVFoundation.h> #import <MediaPlayer/MediaPlayer.h> #import <AudioToolbox/AudioToolbox.h> #import <MessageUI/MessageUI.h> #import <MessageUI/MFMailComposeViewController.h> @interface ScreamViewController : UIViewController <UIApplicationDelegate, AVAudioPlayerDelegate, MFMailComposeViewControllerDelegate> { //AudioPlayer related AVAudioPlayer *appSoundPlayer; NSURL *soundFileURL; BOOL interruptedOnPlayback; BOOL playing; //Scream button related IBOutlet UIButton *screamButton; int currentScreamIndex; NSString *currentScream; NSMutableArray *screams; NSMutableArray *personScreaming; NSMutableArray *photoArray; int currentSayingsIndex; NSString *currentButtonSaying; NSMutableArray *funnyButtonSayings; IBOutlet UILabel *funnyButtonSayingsLabel; IBOutlet UILabel *personScreamingField; IBOutlet UIImageView *personScreamingImage; //Mailing the scream related IBOutlet UILabel *mailStatusMessage; IBOutlet UIButton *shareButton; } //AudioPlayer related @property (nonatomic, retain) AVAudioPlayer *appSoundPlayer; @property (nonatomic, retain) NSURL *soundFileURL; @property (readwrite) BOOL interruptedOnPlayback; @property (readwrite) BOOL playing; //Scream button related @property (nonatomic, retain) UIButton *screamButton; @property (nonatomic, retain) NSMutableArray *screams; @property (nonatomic, retain) NSMutableArray *personScreaming; @property (nonatomic, retain) NSMutableArray *photoArray; @property (nonatomic, retain) UILabel *personScreamingField; @property (nonatomic, retain) UIImageView *personScreamingImage; @property (nonatomic, retain) NSMutableArray *funnyButtonSayings; @property (nonatomic, retain) UILabel *funnyButtonSayingsLabel; //Mailing the scream related @property (nonatomic, retain) IBOutlet UILabel *mailStatusMessage; @property (nonatomic, retain) IBOutlet UIButton *shareButton; //Scream Button - (IBAction) scream: (id) sender; //Mail the scream - (IBAction) showPicker: (id)sender; - (void)displayComposerSheet; - (void)launchMailAppOnDevice; @end Here's the top of .m: #import "ScreamViewController.h" //top of code has Audio session callback function for responding to audio route changes (from Apple's code), then my code continues... @implementation ScreamViewController @synthesize appSoundPlayer; // AVAudioPlayer object for playing the selected scream @synthesize soundFileURL; // Path to the scream @synthesize interruptedOnPlayback; // Was application interrupted during audio playback @synthesize playing; // Track playing/not playing state @synthesize screamButton; //Press this button, girls scream. @synthesize screams; //Mutable array holding strings pointing to sound files of screams. @synthesize personScreaming; //Mutable array tracking the person doing the screaming @synthesize photoArray; //Mutable array holding strings pointing to photos of screaming girls @synthesize personScreamingField; //Field updates to announce which girl is screaming. @synthesize personScreamingImage; //Updates to show image of the screamer. @synthesize funnyButtonSayings; //Mutable array holding the sayings @synthesize funnyButtonSayingsLabel; //Label that updates with the funnyButtonSayings @synthesize mailStatusMessage; //did the email go out @synthesize shareButton; //share scream via email Next line begins the block with the offending code: - (IBAction) scream: (id) sender { //Play a click sound effect SystemSoundID soundID; NSString *sfxPath = [[NSBundle mainBundle] pathForResource:@"aClick" ofType:@"caf"]; AudioServicesCreateSystemSoundID((CFURLRef)[NSURL fileURLWithPath:sfxPath],&soundID); AudioServicesPlaySystemSound (soundID); // Because someone may slam the scream button over and over, //must stop current sound, then begin next if ([self appSoundPlayer] != nil) { [[self appSoundPlayer] setDelegate:nil]; [[self appSoundPlayer] stop]; [self setAppSoundPlayer: nil]; } //after selecting a random index in the array (did that in View Did Load), //we move to the next scream on each click. //First check... //Are we past the end of the array? if (currentScreamIndex == [screams count]) { currentScreamIndex = 0; } //Get the string at the index in the personScreaming array currentScream = [screams objectAtIndex: currentScreamIndex]; //Get the string at the index in the personScreaming array NSString *screamer = [personScreaming objectAtIndex:currentScreamIndex]; //Log the string to the console NSLog (@"playing scream: %@", screamer); // Display the string in the personScreamingField field NSString *listScreamer = [NSString stringWithFormat:@"scream by: %@", screamer]; [personScreamingField setText:listScreamer]; // Gets the file system path to the scream to play. NSString *soundFilePath = [[NSBundle mainBundle] pathForResource: currentScream ofType: @"caf"]; // Converts the sound's file path to an NSURL object NSURL *newURL = [[NSURL alloc] initFileURLWithPath: soundFilePath]; self.soundFileURL = newURL; [newURL release]; [[AVAudioSession sharedInstance] setDelegate: self]; [[AVAudioSession sharedInstance] setCategory: AVAudioSessionCategoryPlayback error: nil]; // Registers the audio route change listener callback function AudioSessionAddPropertyListener ( kAudioSessionProperty_AudioRouteChange, audioRouteChangeListenerCallback, self ); // Activates the audio session. NSError *activationError = nil; [[AVAudioSession sharedInstance] setActive: YES error: &activationError]; // Instantiates the AVAudioPlayer object, initializing it with the sound AVAudioPlayer *newPlayer = [[AVAudioPlayer alloc] initWithContentsOfURL: soundFileURL error: nil]; //Error check and continue if (newPlayer != nil) { self.appSoundPlayer = newPlayer; [newPlayer release]; [appSoundPlayer prepareToPlay]; [appSoundPlayer setVolume: 1.0]; [appSoundPlayer setDelegate:self]; //NEXT LINE IS FLAGGED BY INSTRUMENTS AS LEAKY [appSoundPlayer play]; playing = YES; //Get the string at the index in the photoArray array NSString *screamerPic = [photoArray objectAtIndex:currentScreamIndex]; //Log the string to the console NSLog (@"displaying photo: %@", screamerPic); // Display the image of the person screaming personScreamingImage.image = [UIImage imageNamed:screamerPic]; //show the share button shareButton.hidden = NO; mailStatusMessage.hidden = NO; mailStatusMessage.text = @"share!"; //Get the string at the index in the funnySayings array currentSayingsIndex = random() % [funnyButtonSayings count]; currentButtonSaying = [funnyButtonSayings objectAtIndex: currentSayingsIndex]; NSString *theSaying = [funnyButtonSayings objectAtIndex:currentSayingsIndex]; [funnyButtonSayingsLabel setText: theSaying]; currentScreamIndex++; } } Here's my dealloc: - (void)dealloc { [appSoundPlayer stop]; [appSoundPlayer release], appSoundPlayer = nil; [screamButton release], screamButton = nil; [mailStatusMessage release], mailStatusMessage = nil; [personScreamingField release], personScreamingField = nil; [personScreamingImage release], personScreamingImage = nil; [funnyButtonSayings release], funnyButtonSayings = nil; [funnyButtonSayingsLabel release], funnyButtonSayingsLabel = nil; [screams release], screams = nil; [personScreaming release], personScreaming = nil; [soundFileURL release]; [super dealloc]; } @end Thanks so much for reading this far! Any input appreciated.

  Read the article

• game state singleton cocos2d, initWithEncoder always returns null

  - by taber

  Hi, I'm trying to write a basic test "game state" singleton in cocos2d, but for some reason upon loading the app, initWithCoder is never called. Any help would be much appreciated, thanks. Here's my singleton GameState.h: #import "cocos2d.h" @interface GameState : NSObject <NSCoding> { NSInteger level, score; Boolean seenInstructions; } @property (readwrite) NSInteger level; @property (readwrite) NSInteger score; @property (readwrite) Boolean seenInstructions; +(GameState *) sharedState; +(void) loadState; +(void) saveState; @end ... and GameState.m: #import "GameState.h" #import "Constants.h" @implementation GameState static GameState *sharedState = nil; @synthesize level, score, seenInstructions; -(void)dealloc { [super dealloc]; } -(id)init { if(!(self = [super init])) return nil; level = 1; score = 0; seenInstructions = NO; return self; } +(void)loadState { @synchronized([GameState class]) { NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDirectory = [paths objectAtIndex:0]; NSString *saveFile = [documentsDirectory stringByAppendingPathComponent:kSaveFileName]; Boolean saveFileExists = [[NSFileManager defaultManager] fileExistsAtPath:saveFile]; if(!sharedState) { sharedState = [GameState sharedState]; } if(saveFileExists == YES) { [sharedState release]; sharedState = [[NSKeyedUnarchiver unarchiveObjectWithFile:saveFile] retain]; } // at this point, sharedState is null, saveFileExists is 1 if(sharedState == nil) { // this always occurs CCLOG(@"Couldn't load game state, so initialized with defaults"); sharedState = [self sharedState]; } } } +(void)saveState { NSArray *paths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDirectory = [paths objectAtIndex:0]; NSString *saveFile = [documentsDirectory stringByAppendingPathComponent:kSaveFileName]; [NSKeyedArchiver archiveRootObject:[GameState sharedState] toFile:saveFile]; } +(GameState *)sharedState { @synchronized([GameState class]) { if(!sharedState) { [[GameState alloc] init]; } return sharedState; } return nil; } +(id)alloc { @synchronized([GameState class]) { NSAssert(sharedState == nil, @"Attempted to allocate a second instance of a singleton."); sharedState = [super alloc]; return sharedState; } return nil; } +(id)allocWithZone:(NSZone *)zone { @synchronized([GameState class]) { if(!sharedState) { sharedState = [super allocWithZone:zone]; return sharedState; } } return nil; } ... -(void)encodeWithCoder:(NSCoder *)coder { [coder encodeInt:level forKey:@"level"]; [coder encodeInt:score forKey:@"score"]; [coder encodeBool:seenInstructions forKey:@"seenInstructions"]; } -(id)initWithCoder:(NSCoder *)coder { CCLOG(@"initWithCoder called"); self = [super init]; if(self != nil) { CCLOG(@"initWithCoder self exists"); level = [coder decodeIntForKey:@"level"]; score = [coder decodeIntForKey:@"score"]; seenInstructions = [coder decodeBoolForKey:@"seenInstructions"]; } return self; } @end ... I'm saving the state on app exit, like this: - (void)applicationWillTerminate:(UIApplication *)application { [GameState saveState]; [[CCDirector sharedDirector] end]; } ... and loading the state when the app finishes loading, like this: - (BOOL) application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions { ... [GameState loadState]; ... } I've tried moving around where I call loadState too, for example in my main CCScene, but that didn't seem to work either. Thanks again in advance.

  Read the article

• Update iPhone UIProgressView during NSURLConnection download.

  - by Scott Pendleton

  I am using this code: NSURLConnection *oConnection=[[NSURLConnection alloc] initWithRequest:oRequest delegate:self]; to download a file, and I want to update a progress bar on a subview that I load. For that, I use this code: - (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data { [oReceivedData appendData:data]; float n = oReceivedData.length; float d = self.iTotalSize; NSNumber *oNum = [NSNumber numberWithFloat:n/d]; self.oDPVC.oProgress.progress = [oNum floatValue]; } The subview is oDPVC, and the progress bar on it is oProgress. Setting the progress property does not update the control. From what I have read on the Web, lots of people want to do this and yet there is not a complete, reliable sample. Also, there is much contradictory advice. Some people think that you don't need a separate thread. Some say you need a background thread for the progress update. Some say no, do other things in the background and update the progress on the main thread. I've tried all the advice, and none of it works for me. One more thing, maybe this is a clue. I use this code to load the subview during applicationDidFinishLaunching: self.oDPVC = [[DownloadProgressViewController alloc] initWithNibName:@"DownloadProgressViewController" bundle:nil]; [window addSubview:self.oDPVC.view]; In the XIB file (which I have examined in both Interface Builder and in a text editor) the progress bar is 280 pixels wide. But when the view opens, it has somehow been adjusted to maybe half that width. Also, the background image of the view is default.png. Instead of appearing right on top of the default image, it is shoved up about 10 pixels, leaving a white bar across the bottom of the screen. Maybe that's a separate issue, maybe not.

  Read the article

• Problem releasing UIImageView after adding to UIScrollView

  - by Josiah Jordan

  I'm having a memory problem related to UIImageView. After adding this view to my UIScrollView, if I try to release the UIImageView the application crashes. According to the stack trace, something is calling [UIImageView stopAnimating] after [UIImageView dealloc] is called. However, if I don't release the view the memory is never freed up, and I've confirmed that there remains an extra retain call on the view after deallocating...which causes my total allocations to climb quickly and eventually crash the app after loading the view multiple times. I'm not sure what I'm doing wrong here though...I don't know what is trying to access the UIImageView after it has been released. I've included the relevant header and implementation code below (I'm using the Three20 framework, if that has anything to do with it...also, AppScrollView is just a UIScrollView that forwards the touchesEnded event to the next responder): Header: @interface PhotoHiResPreviewController : TTViewController <UIScrollViewDelegate> { NSString* imageURL; UIImage* hiResImage; UIImageView* imageView; UIView* mainView; AppScrollView* mainScrollView; } @property (nonatomic, retain) NSString* imageURL; @property (nonatomic, retain) NSString* imageShortURL; @property (nonatomic, retain) UIImage* hiResImage; @property (nonatomic, retain) UIImageView* imageView; - (id)initWithImageURL:(NSString*)imageTTURL; Implementation: @implementation PhotoHiResPreviewController @synthesize imageURL, hiResImage, imageView; - (id)initWithImageURL:(NSString*)imageTTURL { if (self = [super init]) { hiResImage = nil; NSString *documentsDirectory = [NSString stringWithString:[NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES) lastObject]]; [self setImageURL:[NSString stringWithFormat:@"%@/%@.jpg", documentsDirectory, imageTTURL]]; } return self; } - (void)loadView { [super loadView]; // Initialize the scroll view hiResImage = [UIImage imageWithContentsOfFile:self.imageURL]; CGSize photoSize = [hiResImage size]; mainScrollView = [[AppScrollView alloc] initWithFrame:[UIScreen mainScreen].bounds]; mainScrollView.autoresizingMask = ( UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleHeight); mainScrollView.backgroundColor = [UIColor blackColor]; mainScrollView.contentSize = photoSize; mainScrollView.contentMode = UIViewContentModeScaleAspectFit; mainScrollView.delegate = self; // Create the image view and add it to the scrollview. UIImageView *tempImageView = [[UIImageView alloc] initWithFrame:CGRectMake(0.0, 0.0, photoSize.width, photoSize.height)]; tempImageView.contentMode = UIViewContentModeCenter; [tempImageView setImage:hiResImage]; self.imageView = tempImageView; [tempImageView release]; [mainScrollView addSubview:imageView]; // Configure zooming. CGSize screenSize = [[UIScreen mainScreen] bounds].size; CGFloat widthRatio = screenSize.width / photoSize.width; CGFloat heightRatio = screenSize.height / photoSize.height; CGFloat initialZoom = (widthRatio > heightRatio) ? heightRatio : widthRatio; mainScrollView.maximumZoomScale = 3.0; mainScrollView.minimumZoomScale = initialZoom; mainScrollView.zoomScale = initialZoom; mainScrollView.bouncesZoom = YES; mainView = [[UIView alloc] initWithFrame:[UIScreen mainScreen].bounds]; mainView.autoresizingMask = ( UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleHeight); mainView.backgroundColor = [UIColor blackColor]; mainView.contentMode = UIViewContentModeScaleAspectFit; [mainView addSubview:mainScrollView]; // Add to view self.view = mainView; [imageView release]; [mainScrollView release]; [mainView release]; } - (UIView *)viewForZoomingInScrollView:(UIScrollView *)scrollView { return imageView; } - (void)dealloc { mainScrollView.delegate = nil; TT_RELEASE_SAFELY(imageURL); TT_RELEASE_SAFELY(hiResImage); [super dealloc]; } I'm not sure how to get around this. If I remove the call to [imageView release] at the end of the loadView method everything works fine...but I have massive allocations that quickly climb to a breaking point. If I DO release it, however, there's that [UIImageView stopAnimating] call that crashes the application after the view is deallocated. Thanks for any help! I've been banging my head against this one for days. :-P Cheers, Josiah

  Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >