Search Results

Search found 17860 results on 715 pages for 'virtual pc'.

Page 187/715 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

  • how to start LXDE session automatically after tightvncserver starts to make me able see desktop when connecting to the host via vncclient?

    - by Oleksandr Dudchenko
    I have system which is equipped with Intel Celeron processor 1.1 GHz s370 with 384 Mb of RAM on Intel d815egew motherboard which supports wake-on-lan function. I want to use such a PC for Internet sharing to the local network. Also this PC is a DHCP+DNS server as well as router/gateway. Based on above I decided to install Lubuntu as it is lightweight system. I installed Lubuntu 10.04.4 LTS from alternate ISO. System has no auto login. System boots and has acceptable performance. Host PC has onboard 4 network adapters: eth0 – ethernet controller which is used for Local Network connections. Has static address 10.0.0.1 eth1 – ethernet controller which is not used and not configured so far, I plan to connect printer here later on. eth2 - ethernet controller which is used to connect to Internet, which we plan to share for the local network wlan0 – wireless controller, it is used in role of access poit for local Network and has address 10.0.0.2 We want to control our gateway remotely. So, we need to be able to power it on remotely. To allow this I’ve done the following things: $ cd /etc/init.d/ made a new file with command $ sudo vim wakeonlanconfig Wrote the following lines to the newly created file, saved and closed it #!/bin/bash ethtool -s eth0 wol g ethtool -s eth2 wol g exit Made the abovementioned file executable $ sudo chmod a+x wakeonlanconfig Then included it into autostart sequence during boot. $ sudo update-rc.d -f wakeonlanconfig defaults after system reboot we will be able to poweron system remotely. Than we need to have a possibility to connect remotely to the host via SSH and VNC. So, I installed following packets with the following commands: $ sudo apt-get update $ sudo apt-get install openssh-server tightvncserver Add ssh daemon into autostart sequence during boot. $ sudo update-rc.d -f ssh defaults Power off the host PC $ sudo halt Then I went to remote place, send magic paket and powered the Host up. System started... And I connected to the host via Putty from remote system under Windows. Than logged in and run the command to start vnc server. $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Using UltraVNC Viewer programm under windows I connected to the host's vnc server, enterd the password and.... sow only mouse cursor in form of cross on a grey background of 800x600 dots, no desktop. Here is my .vnc/xstartup file #!/bin/sh xrdb $HOME/.Xresources xsetroot -solid grey #x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & #x-window-manager & # Fix to make GNOME work export XKL_XMODMAP_DISABLE=1 /etc/X11/Xsession The Question: What I have to change and where to make LXDE session start automatically after tightvncserver starts?

    Read the article

  • Full-Scale Star Trek Props Recreated in LEGO

    - by Jason Fitzpatrick
    Is there a finer way to immortalize your love for one geeky thing than building it with another geeky thing? Flickr user Geeky Tom lives up to his name with these well done 1:1 Star Trek props crafted from LEGO bricks. Hit up the link below to check out the full gallery of phasers, tricorders, and more. LEGO Star Trek TOS [via Neatorama] How to Play Classic Arcade Games On Your PC How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8

    Read the article

  • Configuring Touchpad Multi-Tap on Ubuntu 11.10

    - by nunos
    I am having a hard time configuring my notebook's touchpad. I can do everything I can in Windows with the exception of three-finger tap, which doesn't work, and the action of two-finger tap which is giving me the equivalent to a right-mouse click, when I wanted a middle-mouse click. I read on a forum to use this as a guide. The problem is that I can't even find the configuration file /etc/X11/xorg.conf.d/10-synaptics.conf. I tried running pacman -S xf86-input-synaptics but I don't have the pacman program installed. When I try to install it by sudo apt-get install I get a pacman game instead! I know the guide is for archlinux, so maybe that's why it doesn't work with me. I am running Ubuntu 11.10 on an Asus N82JV. Any help on this is appreciated. Here's the output of xinput list: nuno@mozart:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Microsoft Microsoft® Nano Transceiver v2.0 id=12 [slave pointer (2)] ? ? Microsoft Microsoft® Nano Transceiver v2.0 id=13 [slave pointer (2)] ? ? ETPS/2 Elantech Touchpad id=16 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Sleep Button id=9 [slave keyboard (3)] ? USB2.0 2.0M UVC WebCam id=10 [slave keyboard (3)] ? Microsoft Microsoft® Nano Transceiver v2.0 id=11 [slave keyboard (3)] ? Asus Laptop extra buttons id=14 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=15 [slave keyboard (3)]

    Read the article

  • Web Service gets unavailable after several concurrent calls

    - by Roman
    We are testing GoDaddy Virtual Data Center and came to a very strange issue when our web site gets unavailable. GoDaddy Support keeps saying the issue is in our web server settings, but looking at the result of our tests I doubt it. TEST ENVIRONMENT Virtual DataCenter with Windows hosted at GoDaddy.com. All servers have Windows Server 2008 R2 Datacenter, IIS 7. Server One with IP address 10.1.0.4 Server Two with IP address 10.1.0.3 Both servers are in private network not visible from outside. Port Forward with IP address 50.62.13.174. Port Forward is assigned to Server One TEST DESCRIPTION JMeter is used as a Client App to simulate 30 concurrent users sending 100 SOAP requests each. Interval between requests is 1 second. Http link used for testing: http://50.62.13.174/v2/webservices.asmx TEST ONE Test is run from a computer in our office. After JMeter starts running test, almost immediately, the link above becomes unavailable in a browser. After test completion, the link is not available in a browser for about 5 more minutes. Remote Desktop is working well, so we can connect to Server One remotely. After about 5 minutes since test completion, the link becomes available in a browser again. TEST TWO Test is run from Server Two (that is part of our virtual data center). Test works very well, no visible delays in processing. The link is available in a browser all the time. TEST THREE Test is run from Server One using localhost. The result is the same as in TEST TWO - no issues. TEST FOUR We repeated TEST ONE from other computers that we have located in different countries, all with the same result as TEST ONE. CONCLUSION As the test works well from Server Two, but does not work from outside our virtual data center, we feel there are issues with the network or its capacity. The whole behaviour looks like out requests from outside get stuck somewhere before reaching our virtual data center. Has anybody had similar issues in the past? Are there chances that something is wrong with our server settings?

    Read the article

  • Wireless keeps asking for password

    - by Lewis
    Hia I just installed 12.04 on my old ibook G3 (since i wiped the HDD) Now luckely i have a wifi-ethernet bridge on my pc to give the ibook intertnet but even when it is connected to eth0 (LAN) it keeps asking to connect to eth1(Wi-Fi) the router is using WPA2 Personal with AES I was just wondering, bescuse the router is upsatirs and the ibook is downstairs next to my PC. and the wifi connects upstairs, but I can't use it up there 'cos the batteiy is junk and i got no plugs that'll reach. Thanks in advance Lewis

    Read the article

  • Apress Deal of the Day - 13/Feb/2010 - Pro Hyper–V

    - by TATWORTH
    Today's Apresss $10 Deal of the Day at http://www.apress.com/info/dailydeal is In Pro Hyper–V, author Harley Stagner takes a comprehensive approach to acquiring, deploying, using, and troubleshooting Microsoft’s answer to virtualization on the Windows Server platform. Learn from a true virtualization guru all you need to know about deploying virtual machines, managing your library of VMs in your enterprise, recovering gracefully from failure scenarios, and migrating existing physical machines to virtual hardware.

    Read the article

  • Acer Allionone Z5810 Touchscreen Issues 12.04

    - by Johannes
    I have an Acer Allionone Z5810, and I can't get the touchscreen to work after I install 12.04. Here is the lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0596:0508 MicroTouch Systems, Inc. Bus 001 Device 004: ID 04b8:0005 Seiko Epson Corp. Printer Bus 001 Device 005: ID 07ca:1336 AVerMedia Technologies, Inc. Bus 002 Device 003: ID 04ca:0058 Lite-On Technology Corp. Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 005: ID 04f2:b23f Chicony Electronics Co., Ltd xinput --list Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=9 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=10 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Lite-On Technology Corp. Wireless Device id=8 [slave keyboard (3)] ? USB 2.0 camera id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] My xorg.conf contains: nvidia-xconfig: X configuration file generated by nvidia-xconfig nvidia-xconfig: version 304.48 (buildmeister@swio-display x86-rhel47-04.nvidia.com) Sun Sep 9 21:31:39 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "TouchScreen" EndSection Section "Files" EndSection Section "InputDevice" Identifier "TouchScreen" Driver "microtouch" Option "Type" "finger" Option "Device" "/dev/ttyS3" Option "ScreenNo" "0" Option "MinX" "0" Option "MaxX" "16383" Option "MinY" "0" Option "MaxY" "16383" Option "SendCoreEvents" "yes" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • ubuntu one no inicia sesion desde windows 7

    - by Eder BOhorquez
    hola personal de ubuntu mi nombre es eder bohorquez y soy de colombia tengo problemas con el inicio de sesion desde windows 7 ya he probado en dos diferentes computadores y no me ha dejado iniciar sesion acudo a ustedes para que me ayuden a resolver este inconveniente. especificaciones pc ambos computadores tienen el mismo sistema operativo instalado, como se puede apreciar en la imagen son las especificaciones de mi pc. de antemano muchas gracias por su colaboracion.

    Read the article

  • Questions about game states

    - by MrPlow
    I'm trying to make a framework for a game I've wanted to do for quite a while. The first thing that I decided to implement was a state system for game states. When my "original" idea of having a doubly linked list of game states failed I found This blog and liked the idea of a stack based game state manager. However there were a few things I found weird: Instead of RAII two class methods are used to initialize and destroy the state Every game state class is a singleton(and singletons are bad aren't they?) Every GameState object is static So I took the idea and altered a few things and got this: GameState.h class GameState { private: bool m_paused; protected: StateManager& m_manager; public: GameState(StateManager& manager) : m_manager(manager), m_paused(false){} virtual ~GameState() {} virtual void update() = 0; virtual void draw() = 0; virtual void handleEvents() = 0; void pause() { m_paused = true; } void resume() { m_paused = false; } void changeState(std::unique_ptr<GameState> state) { m_manager.changeState(std::move(state)); } }; StateManager.h class GameState; class StateManager { private: std::vector< std::unique_ptr<GameState> > m_gameStates; public: StateManager(); void changeState(std::unique_ptr<GameState> state); void StateManager::pushState(std::unique_ptr<GameState> state); void popState(); void update(); void draw(); void handleEvents(); }; StateManager.cpp StateManager::StateManager() {} void StateManager::changeState( std::unique_ptr<GameState> state ) { if(!m_gameStates.empty()) { m_gameStates.pop_back(); } m_gameStates.push_back( std::move(state) ); } void StateManager::pushState(std::unique_ptr<GameState> state) { if(!m_gameStates.empty()) { m_gameStates.back()->pause(); } m_gameStates.push_back( std::move(state) ); } void StateManager::popState() { if(!m_gameStates.empty()) m_gameStates.pop_back(); } void StateManager::update() { if(!m_gameStates.empty()) m_gameStates.back()->update(); } void StateManager::draw() { if(!m_gameStates.empty()) m_gameStates.back()->draw(); } void StateManager::handleEvents() { if(!m_gameStates.empty()) m_gameStates.back()->handleEvents(); } And it's used like this: main.cpp StateManager states; states.changeState( std::unique_ptr<GameState>(new GameStateIntro(states)) ); while(gamewindow::gameWindow.isOpen()) { states.handleEvents(); states.update(); states.draw(); } Constructors/Destructors are used to create/destroy states instead of specialized class methods, state objects are no longer static but

    Read the article

  • Skyrim Creation Kit with Xbox 360

    - by funseiki
    I posted this on stackoverflow but was advised to post here (here is a link to the stackoverflow question). I'm hoping for constructive feedback on its plausibility. Update on progress: It looks like there are ways to stuff files back onto the console (horizon, modio, xplorer360, etc) and they do require some form of signing. As of now, though, I've had no luck. I was hoping I could get away with just placing the ".esp" into the directory containing marketplace downloads for Skyrim, along with the signed ".bsa" file (basically a zipped up file containing any extra content the .esp will need to refer that doesn't exist in the basic game). This doesn't work, at least not in the ways I've tried, so next I'm going to try install the entire game to my flash drive (if possible) and attempt to traverse through the game's directory (this is probably unlikely). If anyone else has suggestions or luck or wants more detail on my failures comment/answer away. Here is the question: I'm thinking about buying the PC version of Skyrim to get the Creation Kit (I already own a copy for the Xbox). I have read the faq and scoured plenty of forums to see if there was some way to mod Skyrim for a console (Xbox 360, in particular), but they are generally coming up negative. I realize the CreationKit is on the PC, but I was wondering if there was a way to set up the '.esp' (hopefully I'm interpreting this correctly) files to be placed on the Xbox 360 file system in a similar manner to how game add-ons are downloaded from the Xbox Live Marketplace. I believe it is possible to transfer saves between the console and the PC (e.g. google: 'skyrim mod xbox360'), but these are referencing items that already exist in the game (e.g. a console command for maximum carry weight does not require reference to new animations or models). It would probably be easier if one could navigate through the xbox's file system to see where the games' files are placed, but with the current setup, the file system is abstracted away. Any help or insight on the matter would be much appreciated. I would love to work on a project that would make it possible to let console gamers experience and enjoy all the great mods available to the PC community.

    Read the article

  • Basis of definitions

    - by Yttrill
    Let us suppose we have a set of functions which characterise something: in the OO world methods characterising a type. In mathematics these are propositions and we have two kinds: axioms and lemmas. Axioms are assumptions, lemmas are easily derived from them. In C++ axioms are pure virtual functions. Here's the problem: there's more than one way to axiomatise a system. Given a set of propositions or methods, a subset of the propositions which is necessary and sufficient to derive all the others is called a basis. So too, for methods or functions, we have a desired set which must be defined, and typically every one has one or more definitions in terms of the others, and we require the programmer to provide instance definitions which are sufficient to allow all the others to be defined, and, if there is an overspecification, then it is consistent. Let me give an example (in Felix, Haskell code would be similar): class Eq[t] { virtual fun ==(x:t,y:t):bool => eq(x,y); virtual fun eq(x:t, y:t)=> x == y; virtual fun != (x:t,y:t):bool => not (x == y); axiom reflex(x:t): x == x; axiom sym(x:t, y:t): (x == y) == (y == x); axiom trans(x:t, y:t, z:t): implies(x == y and y == z, x == z); } Here it is clear: the programmer must define either == or eq or both. If both are defined, the definitions must be equivalent. Failing to define one doesn't cause a compiler error, it causes an infinite loop at run time. Defining both inequivalently doesn't cause an error either, it is just inconsistent. Note the axioms specified constrain the semantics of any definition. Given a definition of == either directly or via a definition of eq, then != is defined automatically, although the programmer might replace the default with something more efficient, clearly such an overspecification has to be consistent. Please note, == could also be defined in terms of !=, but we didn't do that. A characterisation of a partial or total order is more complex. It is much more demanding since there is a combinatorial explosion of possible bases. There is an reason to desire overspecification: performance. There also another reason: choice and convenience. So here, there are several questions: one is how to check semantics are obeyed and I am not looking for an answer here (way too hard!). The other question is: How can we specify, and check, that an instance provides at least a basis? And a much harder question: how can we provide several default definitions which depend on the basis chosen?

    Read the article

  • Can anyone tell me how to get the same Gnome desktop environment as the one in the photo?

    - by Elysium
    I have been using gnome fallback for more than a year, but recently I have come across this image: However, when in virtual machine (new copy of ubuntu 12.04) I change to gnome 3 shell, the desktop is not even similar to the one in the photo above. I am wondering if there are others things that I am missing/have to do....to get to the same thing (or similar) that you can see in the image above. NOTE: Here is a screenshot from the virtual machine after I used these commands: sudo add-apt-repository ppa:gnome3-team/gnome3 sudo apt-get update sudo apt-get install gnome-shell

    Read the article

  • Some Oracle VM 3 updates

    - by wcoekaer
    Today we did another patch set update for Oracle VM 3 (3.0.3-build 227). This can be downloaded from My Oracle Support as patch ID 14736185. There are quite a few updates in here and I highly recommend any Oracle VM 3 customer or user to install this update. This patch can be installed on top of Oracle VM 3.0 versions 3.0.2 and 3.0.3. The patch is cumulative for 3.0.3. So if you already installed patch update 1 (3.0.3-150) then this will just be incremental on top of that and brings you to 3.0.3-build 227. There is a readme file which contains the patchlist in the patch info. The following patches are released on ULN for Oracle VM server 3.0 : initscripts-8.45.30-2.100.18.el5.x86_64 The inittab file and the /etc/init.d scripts. kernel-ovs-2.6.32.21-45.6.x86_64 The Linux kernel kernel-ovs-firmware-2.6.32.21-45.6.x86_64 Firmware files used by the Linux kernel osc-oracle-ocfs2-0.1.0-35.el5.noarch Oracle Storage Connect ocfs2 Plugin osc-plugin-manager-1.2.8-9.el5.3.noarch Oracle Storage Connect Plugin Infrastructure osc-plugin-manager-devel-1.2.8-9.el5.3.noarch Oracle Storage Connect Plugin Development ovs-agent-3.0.3-41.6.x86_64 Agent for Oracle VM xen-4.0.0-81.el5.1.x86_64 Xen is a virtual machine monitor xen-devel-4.0.0-81.el5.1.x86_64 Development libraries for Xen tools xen-tools-4.0.0-81.el5.1.x86_64 Various tooling for the manipulation of Xen instances Errata emails will be sent in the next few days with details on the above updates. Or you will find them here. I also did an update of my Oracle VM utilities to 0.4.0. They are also available from My Oracle Support, patch ID 14736239. These utils can be unzipped and installed on the server running Oracle VM Manager. Typically in /u01/app/oracle/ovm-manager-3/ovm_utils. There is a set of man pages in /u01/app/oracle/ovm-manager-3/ovm_utils/man/man8. There now are 6 commands : ovm_vmcontrol : VM level operations ovm_servercontrol : server level operations ovm_vmdisks : virtual disk/physical location mapping for VM disks ovm_vmmessage : message passing utility between the manager and the VM tools (in the Oracle VM templates) ovm_repocontrol : repository level operations ovm_poolcontrol : pool level operations Some of the new changes : at a pool level, acknowledge events and cascade to servers and virtual machines with outstanding events at a pool level, do a rescan of the storage for fibrechannel/iscsi disks if you add new devices (it does this operation then on every running server) at a repository level, fixup a device if it had a failed create repository at a repository level, refresh the repository and this will update the free space in the UI for ocfs2 repositories at a server level, acknowledge server events and cascade to virtual machines if needed at a VM level, acknowledge VM events at a VM level, bind vcpus to cores with vcpuset/vcpuget Please see the man pages and remember that these tools are just written As Is - no SRs... (per the documentation) Hopefully they are useful.

    Read the article

  • how to watch??? England vs Belgium live stream Soccer friendly match ESPN

    - by Dada Fafa
    Do you want to watch:England vs Belgium live streaming online on pc?Searching for a good way to watch England vs Belgium live streaming online today? You've come to the right place!We'll show you how to watch England vs BelgiumNBA games live stream online in perfect high definition quality using any PC or Mac computer! It's possible! Now you can watch every minute of England vs Belgiumonline live,and in true HD quality no matter where you are! WANNA WATCH England vs Belgium LIVE STREAM MATCH

    Read the article

  • Ubuntu comes with firewall by default?

    - by LuC1F3R
    I understand the Ubuntu comes with firwallul UFW is true? There is a GUI for it? if so, what is his name and where do I download? It is possible that UFW notify us (like in windows with a pop-up windows)when someone wants access to your pc or when an application wants to go out on the internet? Is there any firewall for ubuntu notify you when someone wants access to your PC or when an application wants to access the Internet?

    Read the article

  • I am unable to connect to my netbook from any machine on my network until the netbook has pinged it

    - by Samuel Husky
    I have a rather strange issue with my netbook on my local network. When trying to connect to it in any way from a remote system it does not appear to find it. However if I get the netbook to ping the machine trying to connect it mystically appears to work. Below is the ping test from my main PC to the netbook. C:\Users\Sam>ping 192.168.8.102 Pinging 192.168.8.102 with 32 bytes of data: Reply from 192.168.8.100: Destination host unreachable. Reply from 192.168.8.100: Destination host unreachable. Reply from 192.168.8.100: Destination host unreachable. Reply from 192.168.8.100: Destination host unreachable. Ping statistics for 192.168.8.102: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Now a ping from the netbook to my main PC sam@malamute ~ $ ping 192.168.8.100 PING 192.168.8.100 (192.168.8.100) 56(84) bytes of data. 64 bytes from 192.168.8.100: icmp_req=1 ttl=128 time=2.46 ms 64 bytes from 192.168.8.100: icmp_req=2 ttl=128 time=0.835 ms 64 bytes from 192.168.8.100: icmp_req=3 ttl=128 time=1.60 ms 64 bytes from 192.168.8.100: icmp_req=4 ttl=128 time=1.32 ms 64 bytes from 192.168.8.100: icmp_req=5 ttl=128 time=1.34 ms ^C --- 192.168.8.100 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 0.835/1.514/2.460/0.536 ms And the same ping again from the main PC after the netbook has made a connection to it C:\Users\Sam>ping 192.168.8.102 Pinging 192.168.8.102 with 32 bytes of data: Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Ping statistics for 192.168.8.102: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms The netbook is running Gentoo and is currently connected via wireless. My main PC is running Windows 7 however I get the same result no matter what PC I use on this network. Please see this example from a CentOS machine on the same network [root@tiger ~]# ping 192.168.8.102 PING 192.168.8.102 (192.168.8.102) 56(84) bytes of data. From 192.168.8.200 icmp_seq=2 Destination Host Unreachable From 192.168.8.200 icmp_seq=3 Destination Host Unreachable From 192.168.8.200 icmp_seq=4 Destination Host Unreachable --- 192.168.8.102 ping statistics --- 6 packets transmitted, 0 received, +3 errors, 100% packet loss, time 5000ms , pipe 3 If you need any more information or require logs or config files please let me know and any assistance is greatly appreciated. Additional info: No responses on TCP dump from the netbook. Same result when booting into Ubuntu from a USB key. No issue when using a wired Ethernet connection.

    Read the article

  • DLINK WBR-1310B Wireless Router seems to hang...

    - by Ira Baxter
    I have a brand new DLINK-1310B Wireless Router (box never before opened, although I bought it at the neighborhood computer junk store). I am using it at home (and in fact am using it at this instant from a wireless laptop). When operative, I can ping it at 192.168.0.1, and I can log into it from the PC attached to it by LAN and from the wireless PC at //192.168.0.1. In the course of the day since I've installed, it seems to have locked up 3 times. Each time the symptoms are my web browser (or other IP service, e.g., POP3) stops with a "No internet connection" error. Attempts to contact the router via 192.168.0.1 get no reaction, from either the wireless laptop or from the hardwired PC sitting next to it. It doesn't respond to pings to that address either. Power cycling the router fixes it. I've seen discussion in other questions about aging cheap electronics. Its too new to be aged. Anybody else seen this behavior with a DLINK-1310? Or do I just need to exchange it for another and try again? (I hate rolling dice, I bought the DLINK because a previous Linksys died of apparant heating problems, how many do I have to cycle through before I get something that works and is long-term stable?). Remarkably, nobody talks about how much software is in a router. Is the stuff just buggy? EDIT: Happened again, while I was working on the wireless Vista laptop. (Seems like once an hour?) I was a little more careful this time. The wireless laptop can ping it. It can't get the login screen. I visited the LAN-connected PC (takes me a minute to walk from the laptop to the PC at the other end of the house), and attempted to visit a random web page. Surprise, that worked! And, now, after a minute walking back to the laptop, I can reconnect the wireless laptop, and get to the login page from it. Strange the time/date has been reset back to 2002. (I'll swear I set it and saved the system configuration after updating the firmware; it made me redo every other bit of reconfiguration again). Is there something funny about wireless leases expiring? The router says the leases it is handing out are good for 180 minutes, and the delay-to-inaccessible was only about an hour. The DSL connection seems to have a 10 minute lease.

    Read the article

  • Ubuntu 12.04 GUI doesn't load after Virtualbox crash

    - by Itamar Katz
    I have Ubuntu 12.04 64 bit installed as a virtual OS in Virtualbox (the host is windows 7). The Virtualbox data file is on a usb drive that lost connection to the PC while a session was running. Now when I try to start the Ubuntu virtual OS, I get a terminal login screen, but no GUI. When I try to login I get the message sh: 1: cannot create /var/run/motd.new: Directory nonexistent Any suggestions? Can I recover the system?

    Read the article

  • Visual Studio 2012 Launch Winnipeg&ndash;Slides

    - by Dylan Smith
    The Winnipeg .Net User Group hosted a VS 2012 Launch Event at the Imax in Winnipeg on Thursday, Dec 6.  Doing presentations on the giant Imax screen is always fun, and I did the first 2 sessions on: End-To-End Application Lifecycle Management with TFS 2012 Improving Developer Productivity with Visual Studio 2012 Thanks to everybody that came out, and if anybody is interested my slide decks can be downloaded here: TFS 2012 Slides VS 2012 Slides Also the Virtual Machine that I used to do my demo’s can be downloaded from Brian Keller’s blog here: VS 2012 ALM Virtual Machine

    Read the article

  • Scientific Linux - mysql and apache fail to start on reboot

    - by Derek Deed
    Both mysqld and httpd fail to restart following a reboot of the server, although chkconfig --list shows both daemons set to on for run levels 2,3,4 & 5 All control is being exectuted via Webmin Reboot server – MySQl and Apache not running MySQL Database Server MySQL version 5.1.69 MySQL is not running on your system - database list could not be retrieved. ________________________________________ Click this button to start the MySQL database server on your system with the command /etc/rc.d/init.d/mysqld start. This Webmin module cannot administer the database until it is started. Apache Webserver Apache version 2.2.15 Start Apache Search Docs.. Global configuration Existing virtual hosts Create virtual host Select all. | Invert selection. Default Server Defines the default settings for all other virtual servers, and processes any unhandled requests. Address Any Port Any Server Name Automatic Document Root /var/www/drupal Virtual Server Processes all requests on port 443 not handled by other virtual servers. Address Any Port 443 Server Name Automatic Document Root /var/www/drupal Select all. | Invert selection. chkconfig --list mysqld mysqld 0:off 1:off 2:on 3:on 4:on 5:on 6:off chkconfig --list httpd httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off Manually Restart Apache chkconfig --list httpd httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off Manually Restart MySQL chkconfig --list mysqld mysqld 0:off 1:off 2:on 3:on 4:on 5:on 6:off Everything now running okay; but no difference in the chkconfig outputs above. I tried: chkconfig --levels 235 httpd on /etc/init.d/httpd start and the same for mysqld but no change in operation. Log files show that the shutdown has been completed successfully; but there is no indication of the service restarting until it is executed manually: 131112 13:59:15 InnoDB: Starting shutdown... 131112 13:59:16 InnoDB: Shutdown completed; log sequence number 0 881747021 131112 13:59:16 [Note] /usr/libexec/mysqld: Shutdown complete 131112 13:59:16 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended 131112 14:09:52 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 131112 14:09:52 InnoDB: Initializing buffer pool, size = 8.0M 131112 14:09:52 InnoDB: Completed initialization of buffer pool And the Apache logs: [Tue Nov 12 13:59:13 2013] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Tue Nov 12 13:59:13 2013] [notice] Digest: generating secret for digest authentication ... [Tue Nov 12 13:59:13 2013] [notice] Digest: done [Tue Nov 12 13:59:14 2013] [notice] Apache/2.2.15 (Unix) DAV/2 PHP/5.3.3 mod_ssl/2.2.15 OpenSSL/1.0.0-fips configured -- resuming normal operations [Tue Nov 12 13:59:14 2013] [notice] caught SIGTERM, shutting down [Tue Nov 12 14:27:13 2013] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Tue Nov 12 14:27:13 2013] [notice] Digest: generating secret for digest authentication ... [Tue Nov 12 14:27:13 2013] [notice] Digest: done [Tue Nov 12 14:27:13 2013] [notice] Apache/2.2.15 (Unix) DAV/2 PHP/5.3.3 mod_ssl/2.2.15 OpenSSL/1.0.0-fips configured -- resuming normal operations Is anyone able to shed any light on this problem?

    Read the article

  • Storing deb packages on local media

    - by Saeid87
    Is there a way to store deb packages (all or a specific version of package) on a local media (dvd, usb etc...) so later I would be able to install those packages on a PC which does not have Internet connection? For example, these are the packages that I want to install on a PC which doesn't have Internet connection: # TinyOS MSP430 GCC Compiler Repository # Version 4.6.3 deb http://tinyprod.net/repos/debian squeeze main deb http://tinyprod.net/repos/debian msp430-46 main # TinyOS version 2.1.2 deb http://tinyos.stanford.edu/tinyos/dists/ubuntu lucid main

    Read the article

  • Dell bios nightmare on optiplex

    - by Minster
    I own a Dell optiplex gx260 pc and I got bios revision a03 and want to go higher like a09 I tried the Dell support page using the Wine program down loader after a little configuring and set up on Install Shield Wizard I get the message "unable to obtain required information about your system..setup cannot complete" the pc doesn't have a floppy diskette drive any more and the other option using download manager is only executable via Windows Internet explorer I don't blame wine or anybody else but this is frustrating.

    Read the article

  • MegaCli newly created disk doesn't appear under /dev/sdX

    - by Henry-Nicolas Tourneur
    After having successfully added 2 new disks in a new RAID virtual drive (background initialization done), I would have exepected it to appear under /dev/sdh but it's not there (so, unusable). The system is running a CentOS 5.2 64 bits, HAL and udev daemons are running, not records of any sdh apparition under the messsage log file or in dmesg, only MegaCli do see that virtual drive. Any idea ? Some data: [root@server ~]# ./MegaCli -LDInfo -LALL -a0 Adapter 0 -- Virtual Drive Information: Virtual Disk: 0 (target id: 0) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:139392MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Virtual Disk: 1 (target id: 1) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:285568MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default [root@server ~]# ls -l /dev/disk/by-id/scsi-360* lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09 -> ../../sda lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part2 -> ../../sda2 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee -> ../../sdf lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee-part1 -> ../../sdf1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f -> ../../sdb lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec -> ../../sde lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec-part1 -> ../../sde1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d -> ../../sdd lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d-part1 -> ../../sdd1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7 -> ../../sdc lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7-part1 -> ../../sdc1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1 -> ../../sdg lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1-part1 -> ../../sdg1

    Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >