Search Results

Search found 7513 results on 301 pages for 'actual'.

Page 188/301 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

• New 3TB HDD, can see full 2.7TB in Linux and Windows, but shows up as 801.6GB in BIOS

  - by Ben Lee

  I recently purchased a Seagate Barracuda 3TB drive (ST3000DM001). After installing it, my BIOS recognized it but reported the size as 801.6gb. I went ahead and booted into Linux anyway (Ubuntu 11.10 64-bit). Linux saw it as a 2.7TB. Following some online instructions (don't have the link handy, unfortunately), it looks liked converting this drive to GPT was recommended. So I used gparted to do that, then formatted it to NTFS also using gparted. (I'm using NTFS because my machine is daul-boot and I want to have access to the drive in Windows too). I rebooted to Windows (Windows 7 64-bit), and Windows also sees the drive with 2.7TB free. Everything seems to be working fine. The only issue is that my BIOS is still reporting the drive as 801.6GB. My motherboard is an ASRock 770 Extreme3 and BIOS is the latest version. Since everything seems to be working with the new drive anyway, I'm hoping that the fact that the BIOS is reporting the wrong size is not an actual problem. But honestly, I don't really know. Anyone out there more familiar with this know if this could potentially cause any problems in the future? Any way to get the BIOS to report the correct size?

  Read the article

• What happens to Google contacts in the People app in Windows 8

  - by Klas Mellbourn

  In the People tile in Windows 8, you can connect to your different accounts, e.g. LinkedIn, Facebook, Google contacts. I have a lot of contact information in Google Contacts that I have carefully curated. I also have Facebook and LinkedIn contacts. I have already connected Facebook and LinkedIn contacts to the People app, and it seems to work ok. If I connect my Google Contacts to the People app too, what exactly will happen to the Google contacts? Will my Google contacts be modified in any way by the People app? Merged? Synced? (I understand that they will look merged in the People app, but I am wondering what will happen to the actual Google contacts, which I often use outside the People app) For instance: If a contact is in Facebook but is missing from Google Contacts, will it be created in Google contacts? If there is a picture for a person in both Facebook and Google Contacts, will the Google Contacts picture be overwritten? If I add a field, such as "Comments" to a contact in the People app, will that comment be written to the comment field for that contact in Google Contacts?

  Read the article

• How much network latency is "typical" for east - west coast USA?

  - by Jeff Atwood

  At the moment we're trying to decide whether to move our datacenter from the west coast (Corvallis, OR) to the east coast (NY, NY). However, I am seeing some disturbing latency numbers from my location (Berkeley, CA) to the NYC host. Here's a sample result, retrieving a small .png logo file in Google Chrome and using the dev tools to see how long the request takes: Berkeley to NYC server: 215 ms latency, 46ms transfer time, 261ms total Berkeley to Corvallis server: 114ms latency, 41ms transfer time, 155ms total some URLs if you want to try yourself: http://careers.stackoverflow.com/content/cso/img/logo.png (NY, NY) http://serverfault.com/cache/logo.png (Corvallis, OR) It makes sense that Corvallis, OR is geographically closer to Berkeley, CA so I expect the connection to be a bit faster.. but I'm seeing an increase in latency of +100ms when I perform the same test to the NYC server. That seems .. excessive to me. Particularly since the time spent transferring the actual data only went up 10%, yet the latency went up ten times as much! That feels... wrong... to me. I found a few links here that were helpful (through Google no less!) ... http://serverfault.com/questions/63531/does-routing-distance-affect-performance-significantly http://serverfault.com/questions/61719/how-does-geography-affect-network-latency http://serverfault.com/questions/6210/latency-in-internet-connections-from-europe-to-usa ... but nothing authoritative. So, is this normal? It doesn't feel normal. What is the "typical" latency I should expect when moving network packets from the east coast <--> west coast of the USA?

  Read the article

• Latency between IIS and SQL on same physical, two VMs

  - by Jerad Rose

  I have a single server (2x4 core CPUs, 32GB ram), that is a Windows Server 2012 Hyper V host, and it hosts two guest VMs (also Windows Server 2012 instances). One of them is a web server, the other is a SQL server. When hitting a page that loops over 50 records, there is noticeable latency. I capture/report the timings of each iteration on the loop, and each iteration is about 20-30 milliseconds. Of course, this amounts to over a second of latency for the whole loop. I thought maybe SQL needed to be tuned, but running profiler on it, the queries are showing almost 0 duration, so it seems the bottleneck is in transit between the two VMs. I have both VMs configured to use the actual NIC (vs. using a VNIC), so maybe that's part of my problem. Also, this is a classic ASP site, so it's using the SQL OLE DB provider, and I'm wondering if that is part of the problem. This is a new server setup, from an existing Windows 2003/IIS6 server setup where both web and DB run on the same server instance (no virtualization). On that setup, there is no such latency when looping over the cursor like this. But there are so many variables, I'm not sure where to start ruling things out.

  Read the article

• Why do AWS spot-instance prices spike above the "on demand" pricing?

  - by Laykes

  Amazon Pricing on Spot Instance Inconsistencies This is something which will be best explained through screenshots of a historical chart of instance pricings. If you look at a lot of the instance prices for spot instances, you will notice regular patterns of spikes. See here: As you can see, the price for this compute medium instance, regularly spikes above the on demand price. A c1.medium instance (on demand), would only cost $0.186 per hour. But for a period of a few weeks, in zone B, the price would regularly spike to $1.20. This is some 6 times the actual on demand price. It's also not isolated. If you look at zone-b again for small instances, there is a similar, spike frequently. Which goes 4x the on demand pricing. Does anyone know why this happens? Here are a few suggestions Someone entered $1.2 instead of $0.12 (I would discount this since it happened 20 times over the space of 3 weeks). Amazon regularly artifically inflate their prices by bidding on their own instances to get the most bang for their buck. (I would discount this since it would be ridiculous and bad business) Some company launched 1000 servers at once, and wants to make sure that they all launch. (I would discount this since they would presumably launch them at a price which would be below the minimum on demand price. Why would you pay above on demand for a single server?). It's a bug in their reporting?

  Read the article

• Is there a way to tell SGE to run specific jobs as root on the execution node?

  - by Rick Reynolds

  The title kinda says it all... We're using SGE/OGE to submit jobs to a set of worker nodes that then do things with specific pieces of equipment. The programs and scripts that have been created that manipulate this equipment rely on running as root. I'd like SGE to handle allocation of resources in a way that is mindful of users, groups, projects, etc., but I also need the actual jobs to run with root permissions. I've read up on How can one run a prologue script as root in gridengine? to see if anything there was pertinent, but it seems that SGE is providing the "user@" kind of spec specifically for prolog and epilog kinds of actions. Is there any similar functionality for the job itself? I'm aware of su/sudo approaches, but that won't really work in this environment because the sudoers file isn't globally managed (i.e. I'd have to add a whole set of users to /etc/sudoers on lots of machines). I'm currently looking into a setuid kind of solution, but that would definitely be an unnecessary kind of work-around if SGE provides me a way to declare that a specific job (or jobs in a specific queue) always needs to run with a specific user's rights.

  Read the article

• 2 Server FC SAN Configuration

  - by BSte

  I have 2 identical servers: -48GB Ram -8GigE NIC's -2FC NIC's -2x72GB RAID1 Hard Drives -Server 2008R2 Host I also Have a Fibre Channel SAN: -16x146GB RAID10 Hard Drives -2xDual-port FC Controllers (Controller A and B both have ports 1 and 2) -Server 1 has Fiber to Ports A1 and B1 -Server 2 has Fiber to Ports A2 and B2 -I kept the default config with 1 Virtual Disk and 1 Volume -The default mappings show ports A1,A2,B1,B2 on LUN 0 with read-write My goal is: -2xVM's with IIS and Guest Level Failover -2xVM's with SQL 2008 Enterprise using a Single DB and Guest Level Failover -1xVM that is an application server, preferable with Host Failover. From what I read, this will also need AD for clustering to work. -I need at least 1 VM always running for IIS and the SQLDB. This includes hardware failover and application (ie: reboot a VM for Critical updates) I was told I could install the VM's and run them from the SAN, and this is what I've tried: Installed MPIO and HyperV on Server1 and Server 2 Added the SAN as Disk E: on both servers, made it GPT and formatted NTFS Configured HyperV on both server to store use E:\VD and E:\VHD On server1, I was able to install 3 VM's on the SAN and all worked well. On server2, I would start installing the other 2 VM's, but always at some point the VM's would get a corrupt .VHD message (either server). Everything I found about the message typically related to antivirus, so I removed all antivirus on both Host servers (now only running 2008R2). I reformatted drive E: (SAN), recreated the VHD and VD directories, installed 3 VM's on Server 1, and then had the same issue when installing VM's on Server2. Obviously something is wrong, but I'm not certain what exactly. My questions: 1) Are my goals possible with this hardware setup? -I've read 2008R2 supports FC SAN's, but a lot of articles seem to only give examples with iSCSCI setups 2) What would be the suggested route on setting up the SAN (disks,volumes,LUN's)? I've worked with HyperV on a single machine before and never had issues. Actual experience working on SAN's and clustering is new to me. Any suggestions or recommendations to get me in the right direction would be much appreciated.

  Read the article

• Lion server profile manager, device enrollment doesn't work

  - by user964406

  I am in the process of setting up Lion Servers profile manager to manage iPads on our local school network. I don't need to manage them while they are outside the network. I have successfully had it working on my personal network. The school network is behind a proxy which we have no control over. I can get the iPads to view the mydevices page and install a trust cert. I have managed to get an iPad to successfully install the remote management profile. After this the profile manager bugs out. It will list the active task of 'new device (sending)' but it's unable to complete the task. If I click on the device on profile manager and try any of the actions out they will all fail to complete. I am using the auto generated certificates and this works if I bring the server and iPad outside of the school network. Shortly after device enrollment the system log on the Lion server reports the following Replaced the actual ip address with INTERNALIP Jun 4 08:40:53 mini sandboxd[760] ([778]): applepushservice(778) deny network-outbound INTERNALIP:8080 Jun 4 08:40:53 mini sandboxd[760] ([778]): applepushservice(778) deny network-outbound INTERNALIP:8080 Jun 4 08:40:53 mini applepushserviced[778]: Got connection error Error Domain=NSPOSIXErrorDomain Code=1 "The operation couldn\u2019t be completed. Operation not permitted" UserInfo=0x7fa483b1a340 {NSErrorFailingURLStringKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS, NSErrorFailingURLKey=https://albert.apple.com/WebObjects/ALUnbrick.woa/wa/deviceActivation?device=Mac OS} Jun 4 08:40:53 mini applepushserviced[778]: Failed to get client cert on attempt 2, will retry in 15 seconds Does anyone have any ideas on how to get past this stage? Thanks in advance.

  Read the article

• Installing ubuntu 12.04, installs but does not boot after it asks me to remove the CD

  - by Randnum

  I'm Trying to install Ubuntu 12.04 on my computer. It had an old copy of Windows 7 on it I tried to reformat the hard drive for a fresh install of Ubuntu but I think I messed up the partitions in some way that prevents it from fully loading. I'm able to complete the install fine and use guided partitioning so it should be happy but when it gets about 90% through at the part that ejects the cd and restarts the system it fails. After ejecting the CD and restarting it just loads up the bios lenovo splash screen then purple then black. I can hear a sound from my speakers like some notification sound but there is no text on my screen. I've since gone back in under Rescue System to try and reconfigure the partitions hoping that it will fix it and i've tried several combinations. Currently it's SCST1 (0,0,0) (sda) - 500.1 GB ATA WDC WD5000AAkKX-0 #1 100.0 MB K biosgrub #2 494.1 GB B K ext4 / #3 5.9 GB F swap swap 8.2 kb FREE SPACE I'm not sure if I need to set the ext4 to contain the boot flag but if I don't include at least one partition with the boot flag enabled it complains saying that "The partition table format in use on your disks normally requires you to create a separate partition for boot loader code. This partitionshould be marked for use as an "EFI boot Partition" and should be at least 35 MB in size. Note that this is not hte same as a partition mounted on /boot" Like I said it seems to have installed all of the actual data from the CD it's just not properly booting for some reason

  Read the article

• Put one monitor of a dual monitor windows system into standby

  - by Psycogeek

  Standby not Disabled! When running 2 monitors on windows 7 or Windows XP, I would like to be able to put one of the monitors at a time into standby. The method can be manual. When running 2 monitors , the second monitor is not always needed, shutting off the monitors own power switch will turn off the monitor, that does work Ok. Problems with that are , the delay with the monitor logo at turn on, and the power switch is not very accessable, and the switch might not live forever turning it on and off so many times. Using disable methods like devcon, WIN-P and Display, causes all the windows to properly move to the other monitor. While that is what a person would want to happen so they can get hold of the windows, that is not what I want to happen, and some things on the other monitor have to be re-arranged after a re-enable. By putting it into standby mode, nothing changes other than the monitor going into standby. Disconnecting the DVI cable still can cause the system to (properly) shift all the windows over to the one monitor, just like any of the disable methods do. That makes a mess of the windows, and is so unacceptable, that I would prefer to leave the monitor on, wasting power and the hardware, when it could easily go into standby for some time. For both monitors I am using a "MonitorOff" program that puts both monitors into standby, but I can not find a utility that will put only ONE monitor into standby for the windows system. If someone comes along and suggests "ultramon" you must know for a fact that it will put One of either of the monitors into actual standby. And it does not really suit me to use ultramon, I tested it (it was nice) and I did not feel that it was a program I wanted. The 2 monitors are running off of an ATI 4890 card, they are both hooked up DVI-I, the OS is both Windows 7 (primary) and Windows XP. In addition it would also be interesting to have seperate standby activity timers, and follow mouse kind of standby changes, but any manuel method , shortcut, batch , tray, or gadget kind of operation would be a good start.

  Read the article

• Chroot jail of Nginx and php

  - by sqren

  I'm hosting multiple websites on one VPS, and want to chroot each website, eg. /chroot/website1 /chroot/website2 I'm using makejail, which is a highlevel tool, for creating the jails, and copying the libraries and dependencies. Easy peasy. Each website will need nginx, php and mysql. For php I'm using php5-fpm which actually supports chroot by configuration, however I'm not using this (maybe I should?) My question is which approach of the following three is the better: 1) Every website will have its own seperated instance of nginx, php and mysql. The downside is, that each webserver + php has to listen to a different port. I also need a "master" nginx web server in front of them, reverse proxying to the chrooted servers behind it. Probably most secure, but also most advanced. 2) I don't make any chroot jails manually. I setup one nginx web server, that proxies php requests to php-fpm, on different ports. I can have multiple php-fpm configurations each with is own chroot'ed folder. This is quite managable - however only php will be chrooted. Not the actual webserver. Is this secure enough. Also, I tried this option out, and it seems I will need to use TCP instead of sockets for connecting to MySQL. 3) You tell me ;) I'm quite new to chroot jailing, so please correct me if I'm wrong in my assumptions. I've been reading all the tutorials I could find, however, I find the market for chroot guides very scarce. Any help or inputs much appreciated!

  Read the article

• Making always-on-top windows follow the same MRU order as other windows

  - by nitro2k01

  Note: I'm using Windows 7 with the classical alt-tab style, ie the registry key AltTabSettings set to 1. I want to use MRU (most recently used) ordering of windows in the alt-tab list. However, because the windows are ordered in the Z order of the windows rather than actual MRU, this sometimes gives a different order after switching from an always-on-top application. Example: I have applications A, B and C open. A is set to always-on-top while the others aren't. A is focused. I now press alt-tab and application B is focused. I now press alt-tab but instead of application A receiving focus, application C does. Since A has a higher Z order, it's now left of application B, despite being the most recently used, and application C is placed right of B and is the one first getting focus by the cursor. To switch to application A, I need to press shift+alt-tab or cycle through all the other open windows. This is annoying when flicking focus back and forth between an always-on-top application and one that isn't always-on-top. Is there a way to make the alt-tab ordering strictly MRU?

  Read the article

• Identifying mail account used in CRAM-MD5 transaction

  - by ManiacZX

  I suppose this is one of those where the tool for identifying the problem is also the tool used for taking advantage of it. I have a mail server that I am seeing emails that spam is being sent through it. It is not an open relay, the messages in question are being sent by someone authenticating to the smtp with CRAM-MD5. However, the logs only capture the actual data passed, which has been hashed so I cannot see what user account is being used. My suspicion is a simple username/password combo or a user account's password has otherwise been compromised, but I cannot do much about it without knowing what user it is. Of course I can block the IP that is doing it, but that doesn't fix the real problem. I have both the CRAM-MD5 Base64 challenge string and the hashed client auth string containing the username, password and challenge string. I am looking for a way to either reverse this (which I haven't been able to find any information on) or otherwise I suppose I need a dictionary attack tool designed for CRAM-MD5 to run through two lists, one for username and one for password and the constant of the challenge string until it finds a matching result of the authentication string I have logged. Any information on reversing using the data I have logged, a tool to identify it or any alternative methods you have used for this situation would be greatly appreciated.

  Read the article

• Retail windows xp prof sp 2 Lost key but have the genuine cd , what to do?

  - by AdityaGameProgrammer

  I had recently formatted my system only to find out i have lost the cd key to my original cd. i had used the option to enter the product key later. Yes, i know its a stupid thing to do but i bought the cd in 2008 from a retail store and i lost the original packaging. the actual label on the cd is includes service pack version 2002 .@2004 microsoft corporation reserved. There are some numbers on the back side of the cd in the inner ring. i cant for the life of me figure out how what is the use of the genuine cd i have with me when i cant seem to activate it. what exactly is the advantage of having the original cd in your possession in situations like this?. i have tried the unattend.txt and it doesnt contain the correct key. and there does not exist any winnnt.sif file in the cd. where on the cd or in it can i find the product id information i stay in india . and my attempts at trying the microsoft support site keeps getting me directed to page which says they had stopped support for windows xp in 2011. lets say by some miracle i do contact microsoft. what information would i have to provide them? and would they be giving me the product key for my cd key from their database? or a new key?

  Read the article

• laptop motherboard "shorts" when connected to adapter

  - by Bash

  Disclaimer: I'm sort of a noob, and this is a long post. Thank you all in advance! summary: completely dead laptop with no signs of life whatsoever (suddenly, for no apparent reason) Here's the deal: Lenovo Y470 (only a few months old with no water or shock damage). It stopped working suddenly (no lights, no sound, even when connecting adapter with or without battery). I tried a different adapter (same electrical rating), but no luck. I disassembled the thing completely, and tried plugging in the adapter and looking for signs of life with all different combinations of components installed (tried all combinations of RAM, CPU, USB power cords, screen, etc plugged in). no luck. Then, I noticed (as I was plugging in the adapter to try for the millionth time) that there was a "spark" for an instant when I first connect the adapter to the power jack. The adapter's LED would then flash (indicating it isn't working or charging). So, I thought the power jack has a short of some sort (due to bad soldering or something). Scanned virtually every single component on the motherboard, and tested the power jack connections with a multimeter. No shorts or damage to anything on the entire motherboard. Now I'm thinking I need to replace the motherboard. But, my actual question: What does this "shorting" when connecting the adapter signify? (btw, the voltage across the power connections and current through it drop to virtually zero when the adapter is connected and "sparks", and they stay that way). The bewildering thing is that there are no damaged components, and the voltage across adapter terminals returns to normal after I disconnect it (so it's not damaged). Please take a look at the pictures (of the motherboard's power connection and nearby components) and see if I'm missing something completely obvious... Links to pictures and laptop and motherboard model: pictures on DropBox Motherboard model: LA-6881P Laptop model: Lenovo IdeaPad Y470

  Read the article

• Ubuntu 12.04 - Pound Reverse Proxy and Adobe Flex/Flash Auth

  - by James

  First time posting, I have a completely fresh install of ubuntu 12.04 Client as a reverse proxy gateway to our internal network. Our setup is we have one external ip but three domains we would like to point to various webservers on our internal network. It's not so much a load balancing issue or cacheing etc. Merely routing some Client browsers to a port 80 webpage (to adhere to some stricter corporate policies regarding placing port numbers after domain names). I have gone with pound and everything seems to be working fine. Static pages load etc. Everything is good with the exception of a Flash/Flex based WebClient for a Digital Asset Management program. The actual static page loads fine, it is just at the moment of entering credentials, be they correct or incorrect, and hitting login, there is no response whatsoever. Either a rejection or confirmation etc. So the request back to the internal server can't be getting through. I have googled extensively and there might be a solution in a crossdomain.xml file? Documentation isn't very clear. And we are not the authors of the DAM app, and have no control over the code on the Flash/Flex side. Questions: Is there a particular config file/solution for pound that allows Flash/Flex auth information to be forwarded? Is there another reverse proxy program (nginx?)that allows this type of config? Am I looking at this the entire wrong way, should Flash/Flex fundamentally not be allowed to have this access?

  Read the article

• Apache Virtual host not recognized

  - by Bozho

  I've been using one server, then I reinstalled everything on another server, and the mod_jk stopped working. Here is the situation: apache 2.0 sitting "in front" mod_jk used to connect to the apache to tomcat tomcat 6.0.26 used to server the actual requests I followed this tutorial. The result is: accessing http://mysite.com opens the index.html in /var/www/ accessing http://mysite.com:8080/ works OK the logs at /var/logs/apache2 show everything is OK: [Mon Mar 29 22:01:53.310 2010] [28349:3075389184] [info] init_jk::mod_jk.c (2830): mod_jk/1.2.26 initialized [Mon Mar 29 22:01:53 2010] [warn] No JkShmFile defined in httpd.conf. Using default /var/log/apache2/jk-runtime-status [Mon Mar 29 22:01:53 2010] [notice] Apache/2.2.9 (Debian) mod_jk/1.2.26 configured -- resuming normal operations I compared the server.xml, jk.conf, sites-enabled/mysite from the new server to those from the old one and they are identical. The domain name is the same (I updated the DNS record today, and it has refreshed successfully) So the question is, what can go wrong? Is there another place where problems would be logged, if such occur? Update What I can be almost certain of is that the virtual host is not recognized. It is always forwarded to the default virtual host. So, how to make sure the virtual host is recognized and working?

  Read the article

• Sender's Sendmail says "stat=Sent" but recipent doesn't receive the message

  - by user44774

  Guys, I am trying to figure out why sendmail is saying that it sends out an email but I actually never get it. This is from the logs when the email is being sent out: I have replaced the email address with some fake address and I have also replaced the name of the server with a fake hostname. The most significant point of this information from the logs is that it shows that the "Message was accepted for delivery". Do you guys have any suggestions as to why it seems like the message goes out but I never get the actual email? Jun 2 14:34:40 server sendmail[9668]: o52IYeSi009668: --- 250 2.0.0 o52IYeSi009668 Message accepted for delivery Jun 2 14:34:40 server sendmail[9667]: o52IYe9I009667: [email protected], ctladdr=rick (500/500), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30058, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (o52IYeSi009668 Message accepted for delivery) Jun 2 14:34:40 server sendmail[9668]: o52IYeSj009668: <-- QUIT Jun 2 14:34:40 server sendmail[9668]: o52IYeSj009668: --- 221 2.0.0 server.server.com closing connection Jun 2 14:34:41 server sendmail[9670]: o52IYeSi009668: SMTP outgoing connect on [192.168.1.9] Jun 2 14:34:41 server sendmail[9670]: o52IYeSi009668: to=<[email protected]>, ctladdr=<[email protected]> (500/500), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=120368, relay=mailhost.worldnet.att.net. [207.115.11.17], dsn=5.1.1, stat=User unknown Jun 2 14:34:42 server sendmail[9670]: o52IYeSi009668: o52IYgSi009670: DSN: User unknown Jun 2 14:34:42 server sendmail[9670]: o52IYgSi009670: to=<[email protected]>, **delay=00:00:00, xdelay=00:00:00, mailer=local, pri=31625, dsn=2.0.0,** ***stat=Sent*****

  Read the article

• Apache directory structure with multiple hosted languages.

  - by anomareh

  I just got a new work machine up and running and I'm trying to decide on how to set everything up directory wise. I've done some digging around and really haven't been able to find anything conclusive. I know it's a question with a variety of answers but I'm hoping there's some sort of general guidelines or best practices to go by. With that said, here are a few things specific to my situation. I will be doing actual development and testing on the same machine as the server. It is a single user machine in the sense that I will be the only one working on the machine. There will be multiple hosted languages, specifically PHP and RoR while possibly expanding later. I'd like the setup to translate well to a production environment. With those 3 things in mind there are a couple of things I've had in the back of mind. Seeing as it's a single user machine I haven't been able to decide whether or not I should be working on things out of my home directory or if they should be located outside of it. I'm feeling that outside of a user directory would be better as it would translate better to a production environment, but I'm also not sure if that will come with any permission annoyances or concerns seeing as I'll be working on the same machine. Hosting multiple languages seems like it may be a bit quirky. With PHP I've found you're generally just dumping the project somewhere in the document root where as something like a Rails app you have the entire project and you only want the public directory in the document root. Thanks for any insight, opinion, or just personal preference from experience anyone can offer.

  Read the article

• Increasing SQL Server / Sage performance with SSD? (Dell PE T410)

  - by Anthony

  I have a client wanting better performance of their Sage (Accpac & CRM) server (v5.5, soon to be v7). It's running on 1 of 2 Hyper-V VMs (Svr2008) on a Dell PE T410 server with 24GB of RAM (1333MHz) & dual quad-core, and both VMs (only their C: drives) are on a single RAID5 array. All clients connect via 1Gb ethernet. The 2nd VM is SBS2008 with 9GB RAM (& all SBS dbs & company data are on a separate RAID5 array), & 3GB RAM for the Svr2008 hypervisor. I've given the Sage/SQL Server VM all the RAM I can (12GB) & SQL Server RAM caching (~8GB, never exceeds ~7.5GB, eg. entire db can now be cached in RAM) and that's helped significantly. Upgrading the Hypervisor to Svr2012 is an obvious step, but probably not a dramatic improvement? What about an SSD for this Sage/SQL Server VM (VM = 100GB, <10GB for the actual live DB) ? Can SSDs be put into the SAS hot-swap bays? Or will I have to use the mobo SATA(3Gbps?) ports, or PCI-E SSD card? Should SSDs be RAIDed for this situation? Or is SSD's higher reliability offsetting the need for RAID1/5/10? (I have nightly full disk backups) New territory for me, would appreciate some feedback. Thanks, Anthony.

  Read the article

• How do I keep folders synced and backed up between two macs using a Linux NAS (rsync?)

  - by Hultner

  I've got two primary computers, one Mac Pro and one MacBook Pro for when I'm on the go. I've also got a Linux sever which also acts as NAS. Currently I backup the entire computers to an external drive with Time Machine which is rather useless and doesn't sync anything. What I really want to do is to keep my important files synced between both computers and my NAS (which is running RAID 5), that way I'm not backing up easily replaceable systemfiles and I've got all my important files in 3 places where two of them are running raid so at least 5 drives would have to crash at the same time before actual data loss occur. Folders I want to keep synced is basically my photo, documents, development, mamp and work folders and then I want to keep the user library folder backed up but not synced. I'm thinking that I'd have to use rsync but don't know how. Before suggesting Dropbox and similar suggestions I don't want to use them because of several reasons some of them being security (Dropbox obviously proved this), Speed (sometimes I'll sync gigabytes of data and that will be significantly faster locally and probably even through VPN as I have a Gigabit pipe), Space (space on my NAS is cheap and only practically limited by my needs), reliability (even if my internet were to go down I still need to be able to keep my files synced incase I'd need to go somewhere on the fly), price (I already have all the hardware and for the amount of gigabytes and bandwidth I'd need I doubt that there's any free or cheap service). Those are my main reason for wanting to keep it locally. I'm sorry for any spelling or grammatical mistakes that I've might have done. I'm writing this on my smartphone from a shaky train and English isn't my mother tongue. I gratefully appreciate any answers even if only partly solving my problem.

  Read the article

• How does enterprise failover, such as with google.com, actually work?

  - by Alex Regan

  We have a few fedora systems that are configured for web, FTP, and email services. We'd like to mirror these services, so that we can provide near 100% reliability for our users. I'm a fairly experienced Linux administrator, but don't have much experience with redundant systems. What is the best way to do this? How does google and amazon do it? Google.com resolves to multiple IP addresses, but if my local desktop caches one of the IPs that are unreachable, I'm going to get a failed connection message. How do they prevent that from happening? If one of their servers goes down, how is it automatically redirected to another system, without the end-user ever knowing it? I understand there are failover devices, but they're only for failing over the system itself, not a complete network. Let's say we have the worst-case scenario, such as my primary system becomes inaccessible. What are the fundamental components that are used on Linux systems to provide this capability? I'm looking for concepts, or approaches, not answers like "check out openstack". What are the actual pieces that make up the solution? What has to be done to implement this capability? Hopefully my question is clear. I'd like to know what the pieces are that make up a failover system and what approach is taken by successful organizations that implement it. Thanks again, Alex

  Read the article

• What is the most likely cause to a Blue Screen of Death when the user presses Ctrl-Alt-Delete?

  - by Jay

  My wife is experiencing this with her work laptop--she presses Ctrl-Alt-Delete to lock and she gets the BSOD. The first troubleshooting step is usually to "re-image", and it's locked down. So with this question, I am asking whether the behavior is unique enough that someone in the stack-universe knows exactly what this is (something I can tell her to tell her help desk support). Update: help desk said to order more RAM. Alt-tabbing caused the same behavior today. And...she learned that multiple users are affected. I'm not sure I'll be able to clean any additional info that will help w/ troubleshooting. I'll leave the question here for a bit and if an answer ends up being the actual solution, I'll accept it. If not, I think I should probably remove the question (i'll check meta). Update #2.5: The cause appears to be a ctrl-alt-delete keystroke while Sales Team Configurator is open. This can either be to lock the screen (there are workaround in answers already present) or to unlock the screen (no workaround for that).

  Read the article

• Kickstart installation from USB -- Kickstart location

  - by dooffas

  After managing to get a Fedora ISO to rebuild successfully (for a USB stick) after adding a kickstart file (http://serverfault.com/questions/548405/), I now have an issue with locating the kickstart file on the USB media. When this is done from a CDROM you can simply kickckstart by adding this parameter to boot: linux ks=cdrom This will kickstart (providing the kickstart file is named ks.cfg and is in the root of the disk). Now, obviously this will be different for the USB drive, so from my research, I assumed that this line would do the job: linux ks=hd:sdb1:/ks.cfg Evidently this does not work. I get an error informing me this drive is already mounted and cannot be remounted. EDIT: Actual error message: mount: /dev/sdb1 is already mounted or /run/install/tmpmnt0 busy Warning: Can't get kickstart from /dev/sdb1:/ks.cfg To test that the syntax was correct I placed the kickstart file on another USB stick and loaded the same command to grab ks.cfg from the new location: linux ks=hd:sdc1:/ks.cfg This does work (providing USB sticks are mounted in order, boot - sdb1, kickstart - sdc1). The install will kickstart and complete the install with no issue. Obviously having to use 2 pen drives is somewhat frustrating and unreliable. Is there a way around this?

  Read the article

• Facebook Chat through XMPP protocol on Pidgin Portable - Will not Authorize

  - by Sara Neff

  I heard you can use facebook chat on desktops now. Thats awsome! What i didn't hear is that it is a pain in the butt! Not awsome! I've followed six nearly identical sets of instructions from six different websides, including the one that facebook generates for you, to get facebook chat connected through Pidgin. Its the latest portable version, so from what i hear the plugin is out of the question. Whenever I go to try and connect i get a message saying "Not Authorized" and buttons to either modify the account info, or retry. NOTHING i have done has fixed this, and I can't find anything remotely usefull anywhere. I am running windows xp, and running pidgin (portable) off of a flash drive. Someone please tell me what i have to do. I read about authorizing the chat on my actual facebook page. I'd have tried that if i could find out how to do it, but if its there they hid it good. HELP?!

  Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >