Search Results

Search found 21430 results on 858 pages for 'message digest'.

Page 188/858 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

• How to resolve "svn: Can't find a temporary directory: Internal error"?

  - by HorusKol

  I have already googled the message, and I have plenty of disk space available on the SVN server (it's about 4% usage of 150 GB). I have noticed that when I try echo $TMPDIR at the command prompt on the SVN server I get nothing. What is making this a little confusing is that I only get this message from one location when I do an svn diff (that I've tested so far) - this error is not coming up when I try from three other computers (one of which is testing against the exact same repository, the other two are different repositories on the same svn server). About the only difference I can see is that the broken working copy is connecting to the server by an IP address where all the others are using a server name (although this resolves over DNS to the same IP Address). I'm hoping that I don't have to scratch the broken working copy and checkout a new one - unfortunately, this is a legacy project and not all changes have been properly revisioned.

  Read the article

• ASE reports messages as spam?

  - by Adam

  Outside users are attempting to send to our domain (www.lrffpd.com). It's getting rejected sporatically. All of the senders are getting some variation of the error "Unagi.teksnax.com has rejected the message. This message has been blocked because ASE reports it as spam". The error number varies. -Our firewall is a Fortigate and it runs the built-in Fortigate AntiSpam software. I don't this problem is becuase of the firewall because the error is coming from the server, not the firewall. -On the Exchange 2003 server we run ESET NOD32 for Exchange (only for AntiVirus). We also run the IMF filter built into Exchange. I've NEVER heard of ASE and can't find any information about them. What do you think this could be?

  Read the article

• Ubuntu 12.04 on Amazon EC2: /dev/xvda1 will be checked for errors at next reboot?

  - by cwd

  I'm running the lastest Ubuntu 12.04 AMI (ami-a29943cb) from Canonical on Amazon EC2 and quite often when I log in I get the message: *** /dev/xvda1 will be checked for errors at next reboot *** I have read a bunch of documentation on this and seem to understand that every so many reboots (around 37 see Mount count / Maximum mount count below) Ubuntu wants to check a disk for errors. I can see that by using dumpe2fs -h /dev/xvda1 (reference) to get information such as: Last mounted on: / Filesystem UUID: 1ad27d06-4ecf-493d-bb19-4710c3caf924 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 524288 Block count: 2097152 Reserved block count: 104857 Free blocks: 1778055 Free inodes: 482659 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 511 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 Flex block group size: 16 Filesystem created: Tue Apr 24 03:07:48 2012 Last mount time: Thu Nov 8 03:17:58 2012 Last write time: Tue Apr 24 03:08:52 2012 Mount count: 3 Maximum mount count: 37 Last checked: Tue Apr 24 03:07:48 2012 Check interval: 15552000 (6 months) Next check after: Sun Oct 21 03:07:48 2012 Lifetime writes: 2454 MB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: 0a25e04c-6169-4d68-bfa6-a1acd8e39632 Journal backup: inode blocks Journal features: journal_incompat_revoke Journal size: 128M Journal length: 32768 Journal sequence: 0x0000158b Journal start: 1 I've tried these things to get rid of the message and usually the badblocks is what does it for me: Run this command and reboot: sudo touch /forcefsck Run badblocks to check the disk: badblocks /dev/sda1 Edit /etc/fstab and change the last "0" which is the fs_passno column accordingly and then reboot: The root filesystem should be specified with a fs_passno of 1, and other filesystems should have a fs_passno of 2. I don't understand: If this is a virtual drive shouldn't it be less prone to errors? Was the image created with one of the flags set? If not what is triggering it? Why is fs_passno set to 0 on Amazon EC2 Ubuntu images? This is not the first one that is like this.

  Read the article

• PhotoShop CC install: error: could not update photoshop

  - by John Sonderson

  I have renamed the folder to which my previous version of PhotoShop CC was installed and then installed the latest version of PhotoShop CC using the Creative Cloud application. However once Creative Cloud finished downloading and installing PhotoShop CC I got the following error (sorry about having a localized version of windows, so I cannot properly translate the error text, but the error code I get is error code U46M1P6): Anyone got this error and is this OK, or is something wrong and do I need to fix it? I am curious about exactly which features I will be missing due to this error message. I tried restarting the download and install process, but I get error message U44M1P7. Can someone please explain to me why it is not working? Thanks.

  Read the article

• Trouble upgrading OSX, because HD doesn't use GUID Partition Table Scheme

  - by Erik Vold

  So I have a intel-based macbook with osx 10.5 and I'm trying to upgrade to 10.6, but when I run the upgrade 'install' I quickly get to a page where I am supposed to 'Select the disk where you want to install Mac OS X' and there is only the one hard drive, so it is auto selected, and below that I see a warning message and the only button available is the 'Go Back' button. The warning message says: "Macintosh HD" can't be used because it doesn't use the GUID Partition Table scheme. Use Disk Utility to change the partition scheme. Select the disk, choose the Partition tab, select the Volume Scheme and then click Options. So I followed the above instructions, and I got to the last step, where I'm supposed to click the 'Options' button, the problem is that I cannot click that button, it is disabled.. So what am I supposed to do?

  Read the article

• Integrating WIF with WCF Data Services

  - by cibrax

  A time ago I discussed how a custom REST Starter kit interceptor could be used to parse a SAML token in the Http Authorization header and wrap that into a ClaimsPrincipal that the WCF services could use. The thing is that code was initially created for Geneva framework, so it got deprecated quickly. I recently needed that piece of code for one of projects where I am currently working on so I decided to update it for WIF. As this interceptor can be injected in any host for WCF REST services, also represents an excellent solution for integrating claim-based security into WCF Data Services (previously known as ADO.NET Data Services). The interceptor basically expects a SAML token in the Authorization header. If a token is found, it is parsed and a new ClaimsPrincipal is initialized and injected in the WCF authorization context. public class SamlAuthenticationInterceptor : RequestInterceptor {   SecurityTokenHandlerCollection handlers;   public SamlAuthenticationInterceptor()     : base(false)   {     this.handlers = FederatedAuthentication.ServiceConfiguration.SecurityTokenHandlers;   }   public override void ProcessRequest(ref RequestContext requestContext)   {     SecurityToken token = ExtractCredentials(requestContext.RequestMessage);     if (token != null)     {       ClaimsIdentityCollection claims = handlers.ValidateToken(token);       var principal = new ClaimsPrincipal(claims);       InitializeSecurityContext(requestContext.RequestMessage, principal);     }     else     {       DenyAccess(ref requestContext);     }   }   private void DenyAccess(ref RequestContext requestContext)   {     Message reply = Message.CreateMessage(MessageVersion.None, null);     HttpResponseMessageProperty responseProperty = new HttpResponseMessageProperty() { StatusCode = HttpStatusCode.Unauthorized };     responseProperty.Headers.Add("WWW-Authenticate",           String.Format("Basic realm=\"{0}\"", ""));     reply.Properties[HttpResponseMessageProperty.Name] = responseProperty;     requestContext.Reply(reply);     requestContext = null;   }   private SecurityToken ExtractCredentials(Message requestMessage)   {     HttpRequestMessageProperty request = (HttpRequestMessageProperty)  requestMessage.Properties[HttpRequestMessageProperty.Name];     string authHeader = request.Headers["Authorization"];     if (authHeader != null && authHeader.Contains("<saml"))     {       XmlTextReader xmlReader = new XmlTextReader(new StringReader(authHeader));       var col = SecurityTokenHandlerCollection.CreateDefaultSecurityTokenHandlerCollection();       SecurityToken token = col.ReadToken(xmlReader);                                        return token;     }     return null;   }   private void InitializeSecurityContext(Message request, IPrincipal principal)   {     List<IAuthorizationPolicy> policies = new List<IAuthorizationPolicy>();     policies.Add(new PrincipalAuthorizationPolicy(principal));     ServiceSecurityContext securityContext = new ServiceSecurityContext(policies.AsReadOnly());     if (request.Properties.Security != null)     {       request.Properties.Security.ServiceSecurityContext = securityContext;     }     else     {       request.Properties.Security = new SecurityMessageProperty() { ServiceSecurityContext = securityContext };      }    }    class PrincipalAuthorizationPolicy : IAuthorizationPolicy    {      string id = Guid.NewGuid().ToString();      IPrincipal user;      public PrincipalAuthorizationPolicy(IPrincipal user)      {        this.user = user;      }      public ClaimSet Issuer      {        get { return ClaimSet.System; }      }      public string Id      {        get { return this.id; }      }      public bool Evaluate(EvaluationContext evaluationContext, ref object state)      {        evaluationContext.AddClaimSet(this, new DefaultClaimSet(System.IdentityModel.Claims.Claim.CreateNameClaim(user.Identity.Name)));        evaluationContext.Properties["Identities"] = new List<IIdentity>(new IIdentity[] { user.Identity });        evaluationContext.Properties["Principal"] = user;        return true;      }    } A WCF Data Service, as any other WCF Service, contains a service host where this interceptor can be injected. The following code illustrates how that can be done in the “svc” file. <%@ ServiceHost Language="C#" Debug="true" Service="ContactsDataService"                 Factory="AppServiceHostFactory" %> using System; using System.ServiceModel; using System.ServiceModel.Activation; using Microsoft.ServiceModel.Web; class AppServiceHostFactory : ServiceHostFactory {    protected override ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses)   {     WebServiceHost2 result = new WebServiceHost2(serviceType, true, baseAddresses);     result.Interceptors.Add(new SamlAuthenticationInterceptor());                 return result;   } } WCF Data Services includes an specific WCF host of out the box (DataServiceHost). However, the service is not affected at all if you replace it with a custom one as I am doing in the code above (WebServiceHost2 is part of the REST Starter kit). Finally, the client application needs to pass the SAML token somehow to the data service. In case you are using any Http client library for consuming the data service, that’s easy to do, you only need to include the SAML token as part of the “Authorization” header. If you are using the auto-generated data service proxy, a little piece of code is needed to inject a SAML token into the DataServiceContext instance. That class provides an event “SendingRequest” that any client application can leverage to include custom code that modified the Http request before it is sent to the service. So, you can easily create an extension method for the DataServiceContext that negotiates the SAML token with an existing STS, and adds that token as part of the “Authorization” header. public static class DataServiceContextExtensions {        public static void ConfigureFederatedCredentials(this DataServiceContext context, string baseStsAddress, string realm)   {     string address = string.Format(STSAddressFormat, baseStsAddress, realm);                  string token = NegotiateSecurityToken(address);     context.SendingRequest += (source, args) =>     {       args.RequestHeaders.Add("Authorization", token);     };   } private string NegotiateSecurityToken(string address) { } } I left the NegociateSecurityToken method empty for this extension as it depends pretty much on how you are negotiating tokens from an existing STS. In case you want to end-to-end REST solution that involves an Http endpoint for the STS, you should definitely take a look at the Thinktecture starter STS project in codeplex.

  Read the article

• Exchange 2010 setup /prepareAD fails to run

  - by MadBoy

  I've tried installing Exchange 2010 on Windows Server 2008 R2 (only domain controller and all-in-one system). I did setup.exe /prepareAD, setup /prepareSchema and it worked fine the first time I did it. Unfortunately due to problem with Hub Transport installation related to (at least from what I've read) IPv6 being disabled (some say disabling it helped them while some enabling helped them). I did it the proper way by using registry entry to disable IPv6 but it still errored out. So i managed to uninstall everything (renamed some old entries in registry of failed Hub Transport roles and tried to reinstal Exchange after rebooting server. Unfortunetly running setup /prepareAD now gives an error: D:setup /PrepareAd Welcome to Microsoft Exchange Server 2010 Unattended Setup By continuing the installation process, you agree to the license terms of Microsoft Exchange Server 2010. If you don't accept these license terms, please cancel the installation. To review these license terms, please go to http://go.microsoft.com/fwlink/?LinkId=150127&clcid=0x409/ Press any key to cancel setup................ No key presses were detected. Setup will continue. Preparing Exchange Setup Copying Setup Files ......................... COMPLETED No server roles will be installed Performing Microsoft Exchange Server Prerequisite Check Organization Checks ......................... COMPLETED Setup is going to prepare the organization for Exchange 2010 by using 'Setup /P repareAD'. No Exchange 2007 server roles have been detected in this topology. Af ter this operation, you will not be able to install any Exchange 2007 server rol es. Configuring Microsoft Exchange Server Organization Preparation ......................... FAILED The following error was generated when "$error.Clear(); buildToBuildUpgrade -ExsetDataAtom -AtomName OrgLevelCt -DomainController $RoleDomainController" was run: "An error occurred with error code '2147504140' and message 'The data type can't be converted to or from a native Active Directory data type.'.". The Exchange Server setup operation did not complete. Visit http://support.micro soft.com and enter the Error ID to find more information. Exchange Server setup encountered an error. Unfortunetly if i rerun the setup it complains that it needs setup /prepareAD to be run first. Basically all that works now is setup /PrepareSchema and setup /PrepareDomain complains that prepareAD wasn't done. For full information I'm also attaching error I had before I've uninstalled everything and tried again: Hub Transport Role Failed Error: The following error was generated when "$error.Clear(); install-ExsetdataAtom -AtomName SharedMachineSettings -DomainController $RoleDomainController" was run: "An error occurred with error code '2147950640' and message 'There is no such object on the server.'.". An error occurred with error code '2147950640' and message 'There is no such object on the server.'.

  Read the article

• Retrieve user details from Active Directory using SID

  - by er4z0r

  Hi, How can I find a user in my AD when I have his/her SID. I don't want to rely on other attributes, since I am trying to detect changes to these. Example: I get a message about a change to user record containing: Message: User Account Changed: Target Account Name: test12 Target Domain: DOMAIN Target Account ID: %{S-1-5-21-3968247570-3627839482-368725868-1110} Caller User Name: Administrator Caller Domain: DOMAIN Caller Logon ID: (0x0,0x62AB1) Privileges: - I want to notify the user about the change. So I need their account-information from AD. When I try to retrieve the user's data from AD via VBScript like this: Wscript.StdOut.writeLine "Found an Account ID: " & objMatch.value Set objUser = GetObject("LDAP://GUID=1521396824757036278394823687258681110") Wscript.StdOut.writeLine objUser I receive an error stating The handle is invalid Code:80070006

  Read the article

• SSL handshake failed

  - by Webnet

  What does this error message mean for SSL running on a custom port?

  Read the article

• Messed up installation of mysql-server - cannot complete installation or deinstallation

  - by Christian Engel

  apt-get got stuck while installing mysql-server. I don't know why but it just stopped working and never continued. I had to reboot the machine in the middle of the setup process. Now, if I try to install or purge the mysql-server package, apt-get tries to configure mysql-server first (tells me its not installed before that) and cancels with a error message: Sub-process /usr/bin/dpkg returned an error code(1) apt-get also tells me that two packages have not been successfully installed or removed. this is the complete console output: christian@devbox:~$ sudo apt-get install mysql-server [sudo] password for christian: Reading package lists... Done Building dependency tree Reading state information... Done mysql-server is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 17 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y Setting up mysql-server-5.5 (5.5.32-0ubuntu7) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured No apport report written because the error message indicates its a followup error from a previous failure. Errors were encountered while processing: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) christian@devbox:~$

  Read the article

• Server 2012 AD-DS Setup Fails (Microsoft.Directory.Services.Deployment.DeepTasks.DeepTasks not found)

  - by Daniel Steiner

  Good Morning everyone, I am currently trying to promote my 2012 Server to a Domain Controller but when I am at the first step in the setup I get the Error Message (German, Original Message): [Bereitstellungskonfiguration] Fehler bei der Bestimmung, ob der Zielserver bereits ein Domänencontroller ist: Der Typ [Microsoft.Directory.Services.Deployment.DeepTasks.DeepTasks] wurde nicht gefunden: Vergewissern Sie sich, dass die Assembly, die diesen Typ enthält, geladen ist. (Translated to English): Error while determining, if the Targetserver already is a Domain Controller: The Type [Microsoft.Directory.Services.Deployment.DeepTasks.DeepTasks] was not found: Make sure, that the assembly, that contains this type, is loaded. Thus I can neither Configure the AD-DS nor deinstall them via Server Manager. Any Help how to fix that problem would be greatly appricieated.

  Read the article

• Eclipse editor closing itself

  - by Rohit

  I have been facing this weird problem for some days ... When i try to open my eclipse editor it closes itself and just show some error message that is logged in my .log file .. I am pasting my log file content here .. help ! !ENTRY org.eclipse.jface 4 0 2012-09-23 01:45:17.443 !MESSAGE An error has occurred. See error log for more details. !STACK 0 org.eclipse.core.runtime.AssertionFailedException: assertion failed: The application has not been initialized. at org.eclipse.core.runtime.Assert.isTrue(Assert.java:110) at org.eclipse.core.internal.runtime.InternalPlatform.assertInitialized(InternalPlatform.java:148) at org.eclipse.core.internal.runtime.InternalPlatform.getAdapterManager(InternalPlatform.java:169) at org.eclipse.core.runtime.Platform.getAdapterManager(Platform.java:628) at org.eclipse.ui.part.IntroPart.getAdapter(IntroPart.java:143) at org.eclipse.ui.internal.ViewIntroAdapterPart.getAdapter(ViewIntroAdapterPart.java:117) at org.eclipse.ui.internal.util.Util.getAdapter(Util.java:109) at org.eclipse.ui.internal.services.WorkbenchSourceProvider.getShowInSource(WorkbenchSourceProvider.java:406) at org.eclipse.ui.internal.services.WorkbenchSourceProvider.getContext(WorkbenchSourceProvider.java:410) at org.eclipse.ui.internal.services.WorkbenchSourceProvider.updateActivePart(WorkbenchSourceProvider.java:478) at org.eclipse.ui.internal.services.WorkbenchSourceProvider.checkActivePart(WorkbenchSourceProvider.java:305) at org.eclipse.ui.internal.services.WorkbenchSourceProvider.checkActivePart(WorkbenchSourceProvider.java:300) at org.eclipse.ui.internal.services.WorkbenchSourceProvider$2.windowDeactivated(WorkbenchSourceProvider.java:270) at org.eclipse.ui.internal.Workbench$15.run(Workbench.java:1026) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.ui.internal.Workbench.fireWindowDeactivated(Workbench.java:1024) at org.eclipse.ui.internal.WorkbenchWindow$29.shellDeactivated(WorkbenchWindow.java:3169) at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:111) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1258) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1282) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1263) at org.eclipse.swt.widgets.Shell.filterProc(Shell.java:748) at org.eclipse.swt.widgets.Display.filterProc(Display.java:1543)

  Read the article

• Encouter error "Linux ip -6 addr add failed" while setting up OpenVPN client

  - by Mickel

  I am trying to set up my router to use OpenVPN and have gotten quite far (I think), but something seems to be missing and I am not sure what. Here is my configuration for the client: client dev tun proto udp remote ovpn.azirevpn.net 1194 remote-random resolv-retry infinite auth-user-pass /tmp/password.txt nobind persist-key persist-tun ca /tmp/AzireVPN.ca.crt remote-cert-tls server reneg-sec 0 verb 3 OpenVPN client log: Nov 8 15:45:13 rc_service: httpd 15776:notify_rc start_vpnclient1 Nov 8 15:45:14 openvpn[27196]: OpenVPN 2.3.2 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] built on Nov 1 2013 Nov 8 15:45:14 openvpn[27196]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Nov 8 15:45:14 openvpn[27196]: Socket Buffers: R=[116736->131072] S=[116736->131072] Nov 8 15:45:14 openvpn[27202]: UDPv4 link local: [undef] Nov 8 15:45:14 openvpn[27202]: UDPv4 link remote: [AF_INET]178.132.75.14:1194 Nov 8 15:45:14 openvpn[27202]: TLS: Initial packet from [AF_INET]178.132.75.14:1194, sid=44d80db5 8b36adf9 Nov 8 15:45:14 openvpn[27202]: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Nov 8 15:45:14 openvpn[27202]: VERIFY OK: depth=1, C=RU, ST=Moscow, L=Moscow, O=Azire Networks, OU=VPN, CN=Azire Networks, name=Azire Networks, [email protected] Nov 8 15:45:14 openvpn[27202]: Validating certificate key usage Nov 8 15:45:14 openvpn[27202]: ++ Certificate has key usage 00a0, expects 00a0 Nov 8 15:45:14 openvpn[27202]: VERIFY KU OK Nov 8 15:45:14 openvpn[27202]: Validating certificate extended key usage Nov 8 15:45:14 openvpn[27202]: ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication Nov 8 15:45:14 openvpn[27202]: VERIFY EKU OK Nov 8 15:45:14 openvpn[27202]: VERIFY OK: depth=0, C=RU, ST=Moscow, L=Moscow, O=AzireVPN, OU=VPN, CN=ovpn, name=ovpn, [email protected] Nov 8 15:45:15 openvpn[27202]: Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Nov 8 15:45:15 openvpn[27202]: Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Nov 8 15:45:15 openvpn[27202]: Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Nov 8 15:45:15 openvpn[27202]: Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Nov 8 15:45:15 openvpn[27202]: Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA Nov 8 15:45:15 openvpn[27202]: [ovpn] Peer Connection Initiated with [AF_INET]178.132.75.14:1194 Nov 8 15:45:17 openvpn[27202]: SENT CONTROL [ovpn]: 'PUSH_REQUEST' (status=1) Nov 8 15:45:17 openvpn[27202]: PUSH: Received control message: 'PUSH_REPLY,ifconfig-ipv6 2a03:8600:1001:4010::101f/64 2a03:8600:1001:4010::1,route-ipv6 2000::/3 2A03:8600:1001:4010::1,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 194.1.247.30,tun-ipv6,route-gateway 178.132.77.1,topology subnet,ping 3,ping-restart 15,ifconfig 178.132.77.33 255.255.255.192' Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: timers and/or timeouts modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: --ifconfig/up options modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: route options modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: route-related options modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Nov 8 15:45:17 openvpn[27202]: TUN/TAP device tun0 opened Nov 8 15:45:17 openvpn[27202]: TUN/TAP TX queue length set to 100 Nov 8 15:45:17 openvpn[27202]: do_ifconfig, tt->ipv6=1, tt->did_ifconfig_ipv6_setup=1 Nov 8 15:45:17 openvpn[27202]: /usr/sbin/ip link set dev tun0 up mtu 1500 Nov 8 15:45:18 openvpn[27202]: /usr/sbin/ip addr add dev tun0 178.132.77.33/26 broadcast 178.132.77.63 Nov 8 15:45:18 openvpn[27202]: /usr/sbin/ip -6 addr add 2a03:8600:1001:4010::101f/64 dev tun0 Nov 8 15:45:18 openvpn[27202]: Linux ip -6 addr add failed: external program exited with error status: 254 Nov 8 15:45:18 openvpn[27202]: Exiting due to fatal error Any ideas are most welcome!

  Read the article

• Problem with "Transfer-Encoding: chunked" in Apache 2.2

  - by Michal Niklas

  One of client of our web service uses axis2 application that sends HTTP 1.1 query with: Transfer-Encoding: chunked header. Such query is refused by our Apache 2.2 with message: <title>411 Length Required</title> </head><body> <h1>Length Required</h1> <p>A request of the requested method POST requires a valid Content-length.<br /> In Apache logs there is: [Mon May 17 09:06:04 2010] [error] [client 127.0.0.1] chunked Transfer-Encoding forbidden: /app/webservices/soap.hdb When I send such message without Transfer-Encoding: chunked and with Content-Length all works ok. I searched how to solve this problem, but I found only how to disable Transfer-Encoding: chunked on client side. Is there any way to do it on server side?

  Read the article

• Can't install SQL Express 2008R2- caspol.exe application error - the application failed to initialize

  - by Nir

  I'm trying to install SQL Server Express 2008 R2 on Windows 2003 Server (enterprise edition). I get the following error message: Title: caspol.exe - Application Error Text: The application failed to initialize properly (0x000007b), Click on OK to terminate the application. I get the same error message both when downloading the installer and running it and when using the web platform installer. All the pages on the internet I've found about similar problem say it's a corrupt .net installation issue - This server runs multiple .net apps and I've never had any problems with any of them. I've uninstalled and reinstalled .net (causing a painful outage) and nothing changed. Does anyone here has any idea what might cause this? Update 1: additional information I forgot to include: 32bit version of Windows running in a virtual machine, no anti virus Update 2: when running caspol.exe from the command line I get the same error

  Read the article

• RDS installation failure on 2012 R2 Server Core VM in Hyper-V Server

  - by Giles

  I'm currently installing a test-bed for my firms Infrastructure replacement. 10 or so Windows/Linux servers will be replaced by 2 physical servers running Hyper-V server. All services (DC, RDS, SQL) will be on Windows 2012 R2 Server Core VMs, Exchange on Server 2012 R2 GUI, and the rest are things like Elastix, MailArchiver etc, which aren't part of the equation thus far. I have installed Hyper-V server on a test box, and sucessfully got two virtual DC's running, SQL 2014 running, and 8.1 which I use for the RSAT tools. When trying to install RDS (The old fashioned kind, not the newer VDI(?) style), I get a failed installation due to the server not being able to reboot. A couple of articles have said not to do it locally, so I've moved on. Sitting at the Powershell prompt on the Domain Controller or SQL server (Both Server Core), I run the following commands: Import-Module RemoteDesktop New-SessionDeployment -ConnectionBroker "AlstersTS.Alsters.local" -SessionHost "AlstersTS.Alsters.local" The installation begins, carries on for 2 or 3 minutes, then I receive the following error message: New-SessionDeployment : Validation failed for the "RD Connection Broker" parameter. AlstersTS.Alsters.local Unable to connect to the server by using WindowsPowerShell remoting. Verify that you can connect to the server. At line:1 char:1 + NewSessionDeployment -ConnectionBroker "AlstersTS.Alsters.local" -SessionHost " ... + + CategoryInfo : NotSpecified: (:) [Write-Error], WriteErrorException + FullyQualifiedErrorID : Microsoft.PowerShell.Commands.WriteErrorException,New-SessionDeployment So far, I have: Triple, triple checked syntax. Tried various other commands, and a script to accomplish the same task. Checked DNS is functioning as it should. Checked to the best of my knowledge that AD is working as it should. Checked that the Network Service has the needed permissions. Created another VM and placed the two roles on different servers. Deleted all VMs, started again with a new domain name (Lather, rinse, repeat) Performed the whole installation on a second physical box running Hyper-V Server Pleaded with it Interestingly, if I perform the installation via a GUI installation, the thing just works! Now I know I could convert this to a Server Core role after installation, but this wouldn't teach me what was wrong in the first instance. I've probably got 10 pages through various Google searches, each page getting a little less relevant. The closest matches seem to have good information, but it doesn't seem to be the fix for my set-up. As a side note, I expected to be able to "tee" or "out-file" the error message into a text file, but couldn't get that to work either, so I've typed in the error message manually. Chaps, any suggestions, from the glaringly obvious, to the long-winded and complex? Thanks!

  Read the article

• Debugging JuniperSetupClientInstaller.exe Problems

  - by Damon

  I recently moved from Windows 7 to Windows 2008 server so I can run SharePoint on my physical machine and not through a VPC, so I've been trying to get everything re-installed on my system.  As part of that process, I tried re-establishing a connection back to one of client's corporate networks and their system prompted me to run JuniperSetupClientInstaller.exe.  Normally this runs, finishes, and you can connect to the VPN no problem.  This time, however, it failed.  Unfortunately, there were no error messages to let me know why - it just didn't work. I've had success running application in "compatability mode" so I gave that a shot - same problem.  But during the installation I noticed that JuniperSetupClientInstaller.exe unpacks a number of files into a directory (you can see the exact location in the details of the installer) and then runs a DIFFERENT application - JuniperSetupClient.exe.  If you navigate to that directory, you will see a text file named JuniperSetupClient.log that contains information about the setup process. In my case, I installed a SharePoint site on Port 3333 - which the Juniper software needs to communicate with the VPN.  There was a nice message in the log file saying the VPN software could not bind to port 3333 which quickly alerted me to the issue, and moving the site off that port number fixed the issue.  However, it would have been nice to had an error message of sorts because I spent a chunk of time futilely researching compatibility issues. 

  Read the article

• Has anyone else had problems with the miserable kb980408 update?

  - by Dan

  I wasn't experienced any problems before installing kb980408 for Windows 7 x86. The update made it impossible for me to log into my computer after displaying a "Setting up personalized settings for Windows Desktop Update" message, after killing that task a "Windows Explorer is not responding - Windows is checking for a solution to the problem" message appears, then it waits forever... If I killed that task, I was not able to continue the boot process, if I ran explore.exe manually, the same thing happens. The solution, by the way, was to boot into safe mode and use the add/remove program in the control panel to uninstall this wretched piece of code. Start-up repair and/or the use of system restore will not help you, you need to uninstall.

  Read the article

• Cant install AMD Catalyst Radeon 12.10 drivers on Ubuntu 12.10 [closed]

  - by Rey Mestidio

  Possible Duplicate: What is the correct way to install ATI Catalyst Video Drivers? I am trying to install the latest AMD Catalyst Radeon 12.10 drivers on Ubuntu 12.10. When I get to the ready to install screen I get an error message. This is the message from the install log file. I'm not sure what to do. Thanks very much for your help in advance! **Supported adapter detected. Check if system has the tools required for installation. fglrx installation requires that the system have kernel headers. /lib/modules/3.5.0-17-generic/build/include/linux/version.h cannot be found on this system. One or more tools required for installation cannot be found on the system. Install the required tools before installing the fglrx driver. Optionally, run the installer with --force option to install without the tools. Forcing install will disable AMD hardware acceleration and may make your system unstable. Not recommended.**

  Read the article

• Unable to install Eclipse manually

  - by veerendar

  I have just started Linux. I have a SBC(Atom processor) on which I have installed Ubuntu 12.04 and now I am trying to install Fortran IDE. For which I have learnt that I need to install OpenJDK first, then Eclipse Juno and at last the Phortran plugin for Eclipse. I have no Internet access so I had follow the below steps for manual installation. First download the eclipse tar.gz package (downloaded: eclipse-parallel-juno-linux-gtk.tar). Then right-click the eclipse tar.gz and choose the extract here option to extract the tar.gz package.You can also use the command line to extract the tar.gz package. # tar xzf eclipse-cpp-juno-linux-gtk.tar.gz Move to /opt/ folder. # mv eclipse /opt/ Use sudo if the above command gives permission denied message. # sudo mv eclipse /opt/ Create a desktop file and place it into /usr/share/applications # sudo gedit /usr/share/applications/eclipse.desktop and copy the following to the eclipse.desktop file [Desktop Entry] Name=Eclipse Type=Application Exec=/opt/eclipse/eclipse Terminal=false Icon=/opt/eclipse/icon.xpm Comment=Integrated Development Environment NoDisplay=false Categories=Development;IDE Name[en]=eclipse.desktop Create a symlink in /usr/local/bin using # cd /usr/local/bin # sudo ln -s /opt/eclipse/eclipse Now its the time to launch eclipse. # /opt/eclipse/eclipse -clean & Now at step 5, when I type the command sudo ln -s /opt/eclipse/eclipse , I get an this error message: ln: Failed to create symbolic link './eclipse': File exists. Please help me in resolving this.

  Read the article

• Openswan + xl2tpd connections time out after a while

  - by Halfgaar

  I have a non-NATed Openswan+xl2tpd server (Ubuntu 12.04), to which I connect with a Windows 8 behind NAT. The client loses its connection after a while of doing nothing (between 30 and 60 minutes, but I didn't time it). The client doesn't have enabled that it should kill inactive connections. Nor does it ever go into sleep mode. I also tried setting the kill-after-time to 24 hours, but that didn't help. The NAT router behind which the client located is Debian Linux, and its router is a Cisco which connects us directly to the data center where the server is. None of our other connections, like SSH, get dropped with inactivity (because of cheap routers). I did however try turning on the keepalives in /etc/ipsec.conf: config setup (...snip...) nat_traversal=yes force_keepalive=yes keep_alive=10 but that didn't help. As you can see in the config later, dead peer detection's action is clear. That would be a first suggestion to fix, but I need clear, because people will be connecting from everwhere but the kitchen sink. Besides, as I said, in the test setup I have now, I can't see any device killing its connection. (edit: 'restart' also has the same effect) These are of one time it happened: Jul 18 16:18:06 host xl2tpd[1918]: Maximum retries exceeded for tunnel 49070. Closing. Jul 18 16:18:06 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 18359 Jul 18 16:18:06 host xl2tpd[1918]: Connection 4 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 16:18:11 host xl2tpd[1918]: Unable to deliver closing message for tunnel 49070. Destroying anyway. and these on another: Jul 18 17:44:39 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 xl2tpd[1918]: last message repeated 4 times Jul 18 17:44:43 host xl2tpd[1918]: Maximum retries exceeded for tunnel 10918. Closing. Jul 18 17:44:43 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:43 host xl2tpd[1918]: Terminating pppd: sending TERM signal to pid 26338 Jul 18 17:44:43 host xl2tpd[1918]: Connection 6 closed to 89.188.x.y, port 1701 (Timeout) Jul 18 17:44:44 host xl2tpd[1918]: udp_xmit failed to 89.188.x.y:1701 with err=-1:Operation not permitted Jul 18 17:44:48 xl2tpd[1918]: last message repeated 3 times Jul 18 17:44:48 host xl2tpd[1918]: Unable to deliver closing message for tunnel 10918. Destroying anyway. Jul 18 17:44:59 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:44:59 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:09 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:09 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:19 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:19 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:29 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:29 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:39 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:39 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Jul 18 17:45:49 host xl2tpd[1918]: Can not find tunnel 10918 (refhim=0) Jul 18 17:45:49 host xl2tpd[1918]: network_thread: unable to find call or tunnel to handle packet. call = 0, tunnel = 10918 Dumping. Versions: Ubuntu 12.04 Openswan: 2.6.37-1 xl2tpd: 3.1+dfsg-1 kernel: 3.2.0-49-generic configs: /etc/ipsec.conf: version 2.0 # conforms to second version of ipsec.conf specification config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%v4:!10.152.2.0/24 oe=off protostack=netkey force_keepalive=yes keep_alive=10 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=2 rekey=no dpddelay=30 dpdtimeout=120 dpdaction=clear ikelifetime=8h keylife=1h type=transport left=%defaultroute leftprotoport=17/1701 right=%any rightprotoport=17/%any /etc/xl2tpd/xl2tpd.conf [global] ipsec saref = no [lns default] ip range = 10.152.2.2-10.152.2.254 local ip = 10.152.2.1 refuse chap = yes refuse pap = yes require authentication = yes ppp debug = no pppoptfile = /etc/ppp/options.xl2tpd length bit = yes /etc/ppp/options.xl2tpd: require-mschap-v2 refuse-mschap ms-dns 10.152.2.1 asyncmap 0 auth crtscts idle 1800 mtu 1200 mru 1200 lock hide-password local #debug name l2tpd proxyarp lcp-echo-interval 30 lcp-echo-failure 4

  Read the article

• Building a Windows Phone 7 Twitter Application using Silverlight

  - by ScottGu

  On Monday I had the opportunity to present the MIX 2010 Day 1 Keynote in Las Vegas (you can watch a video of it here).  In the keynote I announced the release of the Silverlight 4 Release Candidate (we’ll ship the final release of it next month) and the VS 2010 RC tools for Silverlight 4.  I also had the chance to talk for the first time about how Silverlight and XNA can now be used to build Windows Phone 7 applications. During my talk I did two quick Windows Phone 7 coding demos using Silverlight – a quick “Hello World” application and a “Twitter” data-snacking application.  Both applications were easy to build and only took a few minutes to create on stage.  Below are the steps you can follow yourself to build them on your own machines as well. [Note: In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Building a “Hello World” Windows Phone 7 Application First make sure you’ve installed the Windows Phone Developer Tools CTP – this includes the Visual Studio 2010 Express for Windows Phone development tool (which will be free forever and is the only thing you need to develop and build Windows Phone 7 applications) as well as an add-on to the VS 2010 RC that enables phone development within the full VS 2010 as well. After you’ve downloaded and installed the Windows Phone Developer Tools CTP, launch the Visual Studio 2010 Express for Windows Phone that it installs or launch the VS 2010 RC (if you have it already installed), and then choose “File”->”New Project.”  Here, you’ll find the usual list of project template types along with a new category: “Silverlight for Windows Phone”. The first CTP offers two application project templates. The first is the “Windows Phone Application” template - this is what we’ll use for this example. The second is the “Windows Phone List Application” template - which provides the basic layout for a master-details phone application: After creating a new project, you’ll get a view of the design surface and markup. Notice that the design surface shows the phone UI, letting you easily see how your application will look while you develop. For those familiar with Visual Studio, you’ll also find the familiar ToolBox, Solution Explorer and Properties pane. For our HelloWorld application, we’ll start out by adding a TextBox and a Button from the Toolbox. Notice that you get the same design experience as you do for Silverlight on the web or desktop. You can easily resize, position and align your controls on the design surface. Changing properties is easy with the Properties pane. We’ll change the name of the TextBox that we added to username and change the page title text to “Hello world.” We’ll then write some code by double-clicking on the button and create an event handler in the code-behind file (MainPage.xaml.cs). We’ll start out by changing the title text of the application. The project template included this title as a TextBlock with the name textBlockListTitle (note that the current name incorrectly includes the word “list”; that will be fixed for the final release.)  As we write code against it we get intellisense showing the members available.  Below we’ll set the Text property of the title TextBlock to “Hello “ + the Text property of the TextBox username: We now have all the code necessary for a Hello World application.  We have two choices when it comes to deploying and running the application. We can either deploy to an actual device itself or use the built-in phone emulator: Because the phone emulator is actually the phone operating system running in a virtual machine, we’ll get the same experience developing in the emulator as on the device. For this sample, we’ll just press F5 to start the application with debugging using the emulator.  Once the phone operating system loads, the emulator will run the new “Hello world” application exactly as it would on the device: Notice that we can change several settings of the emulator experience with the emulator toolbar – which is a floating toolbar on the top right.  This includes the ability to re-size/zoom the emulator and two rotate buttons.  Zoom lets us zoom into even the smallest detail of the application: The orientation buttons allow us easily see what the application looks like in landscape mode (orientation change support is just built into the default template): Note that the emulator can be reused across F5 debug sessions - that means that we don’t have to start the emulator for every deployment. We’ve added a dialog that will help you from accidentally shutting down the emulator if you want to reuse it.  Launching an application on an already running emulator should only take ~3 seconds to deploy and run. Within our Hello World application we’ll click the “username” textbox to give it focus.  This will cause the software input panel (SIP) to open up automatically.  We can either type a message or – since we are using the emulator – just type in text.  Note that the emulator works with Windows 7 multi-touch so, if you have a touchscreen, you can see how interaction will feel on a device just by pressing the screen. We’ll enter “MIX 10” in the textbox and then click the button – this will cause the title to update to be “Hello MIX 10”: We provide the same Visual Studio experience when developing for the phone as other .NET applications. This means that we can set a breakpoint within the button event handler, press the button again and have it break within the debugger: Building a “Twitter” Windows Phone 7 Application using Silverlight Rather than just stop with “Hello World” let’s keep going and evolve it to be a basic Twitter client application. We’ll return to the design surface and add a ListBox, using the snaplines within the designer to fit it to the device screen and make the best use of phone screen real estate.  We’ll also rename the Button “Lookup”: We’ll then return to the Button event handler in Main.xaml.cs, and remove the original “Hello World” line of code and take advantage of the WebClient networking class to asynchronously download a Twitter feed. This takes three lines of code in total: (1) declaring and creating the WebClient, (2) attaching an event handler and then (3) calling the asynchronous DownloadStringAsync method. In the DownloadStringAsync call, we’ll pass a Twitter Uri plus a query string which pulls the text from the “username” TextBox. This feed will pull down the respective user’s most frequent posts in an XML format. When the call completes, the DownloadStringCompleted event is fired and our generated event handler twitter_DownloadStringCompleted will be called: The result returned from the Twitter call will come back in an XML based format.  To parse this we’ll use LINQ to XML. LINQ to XML lets us create simple queries for accessing data in an xml feed. To use this library, we’ll first need to add a reference to the assembly (right click on the References folder in the solution explorer and choose “Add Reference): We’ll then add a “using System.Xml.Linq” namespace reference at the top of the code-behind file at the top of Main.xaml.cs file: We’ll then add a simple helper class called TwitterItem to our project. TwitterItem has three string members – UserName, Message and ImageSource: We’ll then implement the twitter_DownloadStringCompleted event handler and use LINQ to XML to parse the returned XML string from Twitter.  What the query is doing is pulling out the three key pieces of information for each Twitter post from the username we passed as the query string. These are the ImageSource for their profile image, the Message of their tweet and their UserName. For each Tweet in the XML, we are creating a new TwitterItem in the IEnumerable<XElement> returned by the Linq query.  We then assign the generated TwitterItem sequence to the ListBox’s ItemsSource property: We’ll then do one more step to complete the application. In the Main.xaml file, we’ll add an ItemTemplate to the ListBox. For the demo, I used a simple template that uses databinding to show the user’s profile image, their tweet and their username. <ListBox Height="521" HorizonalAlignment="Left" Margin="0,131,0,0" Name="listBox1" VerticalAlignment="Top" Width="476"> <ListBox.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal" Height="132"> <Image Source="{Binding ImageSource}" Height="73" Width="73" VerticalAlignment="Top" Margin="0,10,8,0"/> <StackPanel Width="370"> <TextBlock Text="{Binding UserName}" Foreground="#FFC8AB14" FontSize="28" /> <TextBlock Text="{Binding Message}" TextWrapping="Wrap" FontSize="24" /> </StackPanel> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox> Now, pressing F5 again, we are able to reuse the emulator and re-run the application. Once the application has launched, we can type in a Twitter username and press the  Button to see the results. Try my Twitter user name (scottgu) and you’ll get back a result of TwitterItems in the Listbox: Try using the mouse (or if you have a touchscreen device your finger) to scroll the items in the Listbox – you should find that they move very fast within the emulator.  This is because the emulator is hardware accelerated – and so gives you the same fast performance that you get on the actual phone hardware. Summary Silverlight and the VS 2010 Tools for Windows Phone (and the corresponding Expression Blend Tools for Windows Phone) make building Windows Phone applications both really easy and fun.  At MIX this week a number of great partners (including Netflix, FourSquare, Seesmic, Shazaam, Major League Soccer, Graphic.ly, Associated Press, Jackson Fish and more) showed off some killer application prototypes they’ve built over the last few weeks.  You can watch my full day 1 keynote to see them in action. I think they start to show some of the promise and potential of using Silverlight with Windows Phone 7.  I’ll be doing more blog posts in the weeks and months ahead that cover that more. Hope this helps, Scott

  Read the article

• Error in install sql server 2008 rn

  - by Ahmad Karimi

  When running the SQL Server 2008 setup, I receive the following error message: TITLE: Microsoft SQL Server 2008 R2 Setup The following error has occurred: Unable to open Windows Installer file 'H:\Enterprise\x86\setup\sql_engine_core_inst_msi\sql_engine_core_inst.msi'. Windows Installer error message: The system cannot open the device or file specified. . Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0xC24842DB BUTTONS: &Retry Cancel I install the installer 4.5 and restart windows but don't resolve problem.

  Read the article

• run sfc /scannow as administrator, but I am administrator

  - by Luigi

  On my windows 2003 I have to run sfc /scannow as admin. I have tried to run it as local administrator and domain administrator, but it says I need of administrator privilege ???? I have tried runas /user:administrator cmd and then on a new shell sfc /scannow. But it does not work too. The error message is: You must be an administrator running a console session in order to use the Windows File Checker utility. the error message is in italian and should be translated in english as above. The following is the cmd's screenshot of the error. I am connected as domain administrator but I run it a runas to be local admin.

  Read the article

• Oops, no RSA or DSA server certificate found for 'server.host.name:0'?

  - by Scott Warren

  I'm setting up a new web server that hosts a dozen virtual hosts on Ubuntu 12.4 using Apache 2.2.22 with one config file per site. I created all the configuration files all at once and ran a2ensite * to enable them all at once. When I reloaded the configuration it failed and after restarting apache I found the following error message in my error.log: Oops, no RSA or DSA server certificate found for 'server.host.name:0'?! Most of the results for this error message are years old that don't fix the problem or are bugs that have been fixed https://issues.apache.org/bugzilla/show_bug.cgi?id=31709

  Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >