Search Results

Search found 19557 results on 783 pages for 'networking programming'.

Page 188/783 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

  • SSL FTP fails on Windows 7 but not Windows XP clients

    - by Andrew Neely
    We currently use a free SSL-FTP client called Move-It-Freely to transmit data from a custom data entry program at over forty facilities scattered around the state to our central server. Under XP, it works flawlessly. Some facilities have upgraded to Windows 7. On these machines, uploads (transfers to us) work, downloads (transfers from us to them) fail. Replacing the Windows 7 machine with an XP machine solves the problem. We have also verified that the network firewall settings have not changed. This problem persists even if Windows firewall is not running. We were able to remote into one of the Windows 7 machines to verify that the Windows firewall was indeed turned off. We cannot replicate the problem on our own Windows 7 machines, and are at a loss of how to fix this feature for our customers. The data contain health-related information, and needs to be encrypted (hence SSL-FTP.) Despite hours spent on Google, we cannot find a solution.

    Read the article

  • Bandwidth Suggestion

    - by Campo
    I have been asked to analyze the bandwidth usage of a company and make a recommendation for upgrading their Internet connection(s). Here is the layout 3 DLS lines so it is 3x(6 Down, 1 Up Each) into a load balancer out to the office's network. 30 VOIP phones run on a T1 (1.5 Down, 1.5 Up) The users at the company are heavily uploading. It is my suspicion that the issue in slowdown is being cause by multiple people uploading and others not being able to get requests out for even simple http requests. My initial idea is to get them a fiber line with a 10 down and 10 up. What do others think on this plan? Will that be enough to host their network traffic? What do I do about the VOIP line afterward? The fiber is expensive and I know the T1 does a great job for their VOIP so I do not want to suggest a DSL line because I know it may not be sufficient. I would also like to save them some money if I can. Maybe even get a faster fiber line and forgo the T1. Though I know their load balance/switch can only handle 20MB/S throughput. Looking for some confirmation/suggestions on my plan. I am planning on going in to get some real diagnostic numbers. Any suggestions on software to use for that? Preferably Windows software.

    Read the article

  • Bonding: works only for download

    - by Crazy_Bash
    I would like to install bonding with 4 links with mode 4. but only "download/receiving" works with bondig. for transmitting the system chooses one link. ifconfig bond0 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 inet addr:ip Bcast:ip Mask:255.255.255.248 inet6 addr: fe80::92e2:baff:fe0f:76b4/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:239187413 errors:0 dropped:10944 overruns:0 frame:0 TX packets:536902370 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14688536197 (13.6 GiB) TX bytes:799521192901 (744.6 GiB) eth2 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:54969488 errors:0 dropped:0 overruns:0 frame:0 TX packets:2537 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3374778591 (3.1 GiB) TX bytes:314290 (306.9 KiB) eth3 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:64935805 errors:0 dropped:1 overruns:0 frame:0 TX packets:2532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3993499746 (3.7 GiB) TX bytes:313968 (306.6 KiB) eth4 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:57352105 errors:0 dropped:2 overruns:0 frame:0 TX packets:536894778 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3524236530 (3.2 GiB) TX bytes:799520265627 (744.6 GiB) eth5 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:61930025 errors:0 dropped:3 overruns:0 frame:0 TX packets:2540 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3796021948 (3.5 GiB) TX bytes:314274 (306.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:62 errors:0 dropped:0 overruns:0 frame:0 TX packets:62 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5320 (5.1 KiB) TX bytes:5320 (5.1 KiB) those are my configs: DEVICE="eth2" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth3" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth4" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth5" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE=bond0 IPADDR=<ip> BROADCAST=<ip> NETWORK=<ip> GATEWAY=<ip> NETMASK=<ip> USERCTL=no BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Aggregator selection policy (ad_select): stable Active Aggregator Info: Aggregator ID: 1 Number of ports: 4 Actor Key: 17 Partner Key: 11 Partner Mac Address: 00:24:51:12:63:00 Slave Interface: eth2 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b4 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b5 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b6 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b7 Aggregator ID: 1 Slave queue ID: 0 /etc/modprobe.d/bonding.conf alias bond0 bonding options bond0 mode=4 miimon=100 updelay=200 #downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 Linux: Linux 3.0.0+ #1 SMP Fri Oct 26 07:55:47 EEST 2012 x86_64 x86_64 x86_64 GNU/Linux what i've tried: downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 mode 6

    Read the article

  • Router's ssid changes from infrastructure to ad-hoc

    - by waldo
    For a period of time the router's ssid is shown (on various computers) as a normal infrastructure network - computers connect fine and everything works however after a few minutes / hours all computers see the same ssid as an ad-hoc network (not infrastructure). At this point a computer that was already connected continues to work - a computer that isn't cannot connect. Rebooting the router temporarily restores the visibility of the correct infrastructure ssid. Is something interfering? Connecting computers: macbook (2009), iphone 3g, windows vista desktop, windows xp desktop. Details: - D-Link DSL-2740B router set to WPA2-PSK (Personal) - Enable Wireless : Yes - Wireless Network Name (SSID) : ###### - Country : Australia - Wireless Channel : 1 - 802.11 Mode : Mixed 802.11n, 802.11g and 802.11b - Channel Width : Auto 20/40 MHz - Transmission Rate : Best (automatic) - Hide Wireless Network : No - Group Key Update Interval : 0 (seconds)

    Read the article

  • How to configure Windows 2008 R2 server for LAN and wireless internet connections

    - by Alchemical
    For special testing purposes, we need a Windows server to allow the following: A team member can log in remotely to the server. When remotely logged in, they can disconnect the wireless connection, perform a few tests, and then reconnect the wireless connection. In general, the LAN connection would just be used for the remote login, the wireless connection would be used for performing tests including using a web browser to test certain web sites, etc. How can we successfully configure the server to support 2 network connections like this? (A regular LAN connection + a wireless connection). And also make sure that the tests we perform using the browser utilize the wireless connection for the outgoing internet activity.

    Read the article

  • What does transactions per seconds for a load balancer mean

    - by Anurag
    I was looking at the product matrix of webmux 592G(load balancer). It says maximum connections per sec = 2.8M Maximum number of transactions = 100,000 What does the above numbers mean. Does above means that load balancer can have 2.8M connections open but only 100K of them will be active per seconds. Also incase any one has used webmux 592G do you guys know in practice how many connections it can have open and what qps it can serve

    Read the article

  • OpenSuSE 11 iscsi target: HFS+ partition not seen by clients

    - by radiopaque
    I have an openSuSE machine as a file server, which has an Areca 1880i inside. It contains several partitions. There is a dm-0 and a dm-1 partition, for example. The partitions are formatted as EFI system partitions, with HFS+ file systems. My opensuse could not read them but the iscsitarget exported them for my Macs. This worked for more than a year. For some reason now, after some network problems which were "solved", my dm-0 partition is not seen anymore! I suspect it is a problem on the iscsi target side, i.e. the OpenSuSE machine. Can anyone suggest what I should look into? Any logs, any settings on the linux machine? None of my macs can access the partition, and they use different client software!! Thanks!

    Read the article

  • Double VPN Network Authentication

    - by Pyromanci
    I have a project I'm working on and looking for some info. Right now I have a VPN network using Cisco Pix 501's for the vpn clients and a Cisco VPN Concentrator 3000 for the VPN Server. Since the Pix is constantly connected to the vpn, I want to add a extra level of authentication. Meaning when the user on the other end goes to access anything on the VPN they are asked for a username password before the connection is established. I've never done this sort of structure before. So I'm not even sure where to really being or even if my current hardware can do something like this, or if i need to through in some sort of radius/LDAP/Active Directory type server into the mix.

    Read the article

  • Problems when trying to connect to a router wirelessly

    - by Ruud Lenders
    The situation - At my girlfriend's parents' place there are six Windows 7 devices that are wired or wireless connected to a router: 3 dekstops and 3 laptops. There are also several smartphones using the router. The router is secured with WPA2 (AES). The problem - We never had any problems with the router for over a year. But recently - about 3 weeks ago - my girlfriend's laptop (HP) and my laptop (ASUS) started to develop problems while trying to connect to the router. The router has stopped showing up from the network list. Sometimes it comes back and shows up, but then it keeps saying something along the lines of "Could not connect", and not long after that it dissapears again. The range of the router is not the problem here, because we experience the same when we sit next to the router. Sometimes, if we are lucky, and waited a long time (10-15 minutes) without using the laptop for anything, the laptop will eventually succesful connect to the router. The attempts - Of course, the Window 7 troubleshooter. We tried troubleshooting the connection problems and the wireless network adapter, but no luck. We also reset the router enough times to know that's not helping either. Here's the full list of things we tried, but did not help: Running the Windows 7 troubleshooter Resetting the router (more than once) Setting the router settings to factory defaults Disconnecting all other devices except one laptop Applying a system restore Trying static/dynamic IP/DNS - Dynamic is better, right? Enabling/disabling IPv6 - Should I keep IPv6 disabled? Running the command: netsh wlan stop hostednetwork Running the command: netsh wlan set hostednetwork mode=disallow Updating/reïnstalling wireless adapter drivers The tests - To help finding the core of the problem, we tested the following: Plugging an ethernet cable in the router and in our laptops - worked fine Connecting someone else's laptop to the router (wireless) - worked fine Connecting our laptops to someone else's router - worked fine The router - This information might be relevant: Router model: Sitecom 300N Wireless Router Router hardware: version 01 The DCHP Server's IPs range from 192.168.0.100 to 192.168.0.200. Router settings: Wireless channel: 12 Channel bandwidth: 20/40 MHz Extension channel: 8 Preamble type: Long 802.11g protection: Disabled UPnP: Enabled The laptops - If you are wondering about our laptops: My laptop model: ASUS Pro64JQ Girlfriend's laptop: HP Pavillion G6 OS: Both Windows 7 Professional x64 - with Service Pack 1 My wireless adapter: Atheros AR9285 AdHoc 11n: Enabled The question - Does anyone have experienced the same problems as I do? Or does someone know how to solve this? Are there more tricks I can try, or settings I should change? Note - Our laptops are not slow or old. My laptop is 1.5 years old, and the other laptop is just 5 months old. I know how to keep laptops clean and I'm pretty sure both laptops are not bloated with useless software.

    Read the article

  • datacenter network change control best practices

    - by jpolache
    I have been tasked with compiling a list of possible network equipment changes at a data center. The task includes tagging which changes need change control and which don't. Does anyone know of a "best practices" list that I can start from? The methods for doing change control at this data center are well established. The list would be of specific configuration items that should or should not be included in the change control process, of example; static route entries switch port assignments firewall rule additions/changes etc.

    Read the article

  • vconfig created virtual interface and trunking - is the the interface untagged or tagged for that VLAN ID?

    - by kce
    I am trying to setup an additional VLAN on our Debian-based router/firewall (which exists as a virtual machine on Hyper-V), our core switch (an HP Procurve 5406) and a remote HP ProCurve 2610 that is connected via a WAN Transparent Lan Service (TLS) link. Let's work backwards from the network edge: The Debian server has an external connection attached to eth0. The internal interface is eth1, which is connected directly from our Hyper-V host to the 5406. The port that eth1 is attached to is setup as Trk12. The 2610 is attached to Trk9 (which trunks a whole slew of VLANs - Trk9 is our TLS head). I can successfully ping the management IP addresses for my VLAN from both switches but I cannot ping, from either switch, the virtual interface for my new VLAN on the Debian-base router and firewall. The existing VLAN works fine. What gives? The port eth1 is attached to is a trunk, the existing VLAN (ID 98) is untagged on the trunk, the new VLAN (ID 198) is tagged. VLAN 198 is tagged on Trk9 on the 5406 and on the 2610. I can ping the other switch's management IP (10.100.198.2 and 10.100.198.3) from the other respective switch. That leg of the VLAN works - however I cannot communicate with eth1.198's 10.100.198.1. I feel like I'm missing something elementary but what it is remains illusive to me. I suspect the issue is with the vconfig created eth1.198. It should pass the tagged VLAN 198 packets correct? But they cannot seem to get any further than the 5406. Communication on the existing VLAN 98 works fine. From the Debian box: eth1: eth1 Link encap:Ethernet HWaddr 00:15:5d:34:5e:03 inet addr:10.100.0.1 Bcast:10.100.255.255 Mask:255.255.0.0 inet6 addr: fe80::215:5dff:fe34:5e03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12179786 errors:0 dropped:0 overruns:0 frame:0 TX packets:20210532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1586498028 (1.4 GiB) TX bytes:26154226278 (24.3 GiB) Interrupt:9 Base address:0xec00 eth1.198: eth1.198 Link encap:Ethernet HWaddr 00:15:5d:34:5e:03 inet addr:10.100.198.1 Bcast:10.100.198.255 Mask:255.255.255.0 inet6 addr: fe80::215:5dff:fe34:5e03/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1496 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:72 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:3528 (3.4 KiB) # cat /proc/net/vlan/eth1.198: eth1.198 VID: 198 REORDER_HDR: 0 dev->priv_flags: 1 total frames received 0 total bytes received 0 Broadcast/Multicast Rcvd 0 total frames transmitted 72 total bytes transmitted 3528 total headroom inc 0 total encap on xmit 39 Device: eth1 INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0 EGRESS priority mappings: # ip route 10.100.198.0/24 dev eth1.198 proto kernel scope link src 10.100.198.1 206.174.64.0/20 dev eth0 proto kernel scope link src 206.174.66.14 10.100.0.0/16 dev eth1 proto kernel scope link src 10.100.0.1 default via 206.174.64.1 dev eth0 # iptables -L -v Chain INPUT (policy DROP 6875 packets, 637K bytes) pkts bytes target prot opt in out source destination 41 4320 ACCEPT all -- lo any anywhere anywhere 11481 1560K ACCEPT all -- any any anywhere anywhere state RELATED,ESTABLISHED 107 8058 ACCEPT icmp -- any any anywhere anywhere 0 0 ACCEPT tcp -- eth1 any 10.100.0.0/24 anywhere tcp dpt:ssh 701 317K ACCEPT udp -- eth1 any anywhere anywhere udp dpts:bootps:bootpc Chain FORWARD (policy DROP 1 packets, 40 bytes) pkts bytes target prot opt in out source destination 156K 25M ACCEPT all -- eth1 any anywhere anywhere 215K 248M ACCEPT all -- eth0 eth1 anywhere anywhere state RELATED,ESTABLISHED 0 0 ACCEPT all -- eth1.198 any anywhere anywhere 0 0 ACCEPT all -- eth0 eth1.198 anywhere anywhere state RELATED,ESTABLISHED Chain OUTPUT (policy ACCEPT 13048 packets, 1640K bytes) pkts bytes target prot opt in out source destination From the 5406: # show vlan ports trk12 detail Status and Counters - VLAN Information - for ports Trk12 VLAN ID Name | Status Voice Jumbo Mode ------- -------------------- + ---------- ----- ----- -------- 98 WIFI | Port-based No No Untagged 198 VLAN198 | Port-based No No Tagged

    Read the article

  • 2 x Netgear GS724T (Dual GBIC) trunking issue

    - by Arthor
    I have the following: Netgear GS724T (Firmware Version V1.0.3_35, Protocol Version - 2.001.002) 4 x Indineon ISFP GBR/FC Settings STP Function - Enabled Fast Link - Enabled Trunking port 23,24, (21,22 - RJ45 cables, but not connected.) I have connected both switches via 2 fiber cables and want to use trunking. The problem I am having. Sometimes I get a an issue when none of the switches cannot talk with each other, nor the devices, sometime they can. The problem is irregular and no patten can be determined The statistics shows that when the switches does not work, they have RX errors If I remove one to the GBIC connections, then everything works as normal.] Question Does anyone have a solution for this please? Thanks

    Read the article

  • Step by step USB Wi-Fi driver install for mint 15

    - by Andy
    I'm running Linux mint 15 32 bit on a Dell inspiron 2200. I have given up trying to get the Broadcom BCM4318 built in wireless working, so bought a Dynamode Nano 802.11n wireless USB adapter. It came with an install disc. I have no idea how to install it. Could someone please point me in the right direction for full, idiot proof, step by step instructions. I've been using Ubuntu 12.04 but am totally new to mint 15, so best to assume no previous knowledge. Thanks in advance.

    Read the article

  • Strange traceroute to msdn.microsoft.com

    - by Jasper
    The problem is I could not view any msdn.microsoft.com/* site and the main site itself on my Ubuntu box on Google Chrome browser. Error is: Error 101 (net::ERR_CONNECTION_RESET): The connection was reset. When I run traceout I get different result: Here is simple one: traceroute msdn.microsoft.com traceroute to msdn.microsoft.com (65.55.11.235), 30 hops max, 60 byte packets 1 10.0.0.138 (10.0.0.138) 0.121 ms 0.131 ms 0.128 ms 2 192.168.0.1 (192.168.0.1) 1.730 ms 1.724 ms 2.024 ms 3 bzq-179-37-1.static.bezeqint.net (212.179.37.1) 18.314 ms 19.277 ms 20.694 ms 4 bzq-218-227-250.red.bezeqint.net (81.218.227.250) 22.806 ms 23.651 ms 24.820 ms 5 bzq-179-75-198.static.bezeqint.net (212.179.75.198) 26.650 ms 27.533 ms 28.791 ms 6 * * * 7 bzq-179-124-122.static.bezeqint.net (212.179.124.122) 76.032 ms 72.968 ms 74.660 ms 8 igblmdistc7504.uk.msft.net (195.66.224.140) 75.708 ms 76.797 ms 78.257 ms 9 ge-5-1-0-0.lts-64cb-1a.ntwk.msn.net (207.46.42.227) 80.125 ms 81.336 ms 82.671 ms 10 ge-7-0-0-0.nyc-64cb-1a.ntwk.msn.net (207.46.47.20) 179.232 ms so-7-1-0-0.ash-64cb-1b.ntwk.msn.net (213.199.144.158) 162.508 ms 163.223 ms 11 xe-0-0-1-0.co1-96c-1b.ntwk.msn.net (207.46.45.29) 227.964 ms ge-7-0-0-0.co1-64c-1b.ntwk.msn.net (207.46.40.90) 228.226 ms xe-0-0-1-0.co1-96c-1b.ntwk.msn.net (207.46.45.29) 212.781 ms 12 10.22.8.54 (10.22.8.54) 215.046 ms xe-5-2-0-0.co1-96c-1a.ntwk.msn.net (207.46.40.167) 214.825 ms 10.22.8.58 (10.22.8.58) 213.251 ms 13 10.22.8.62 (10.22.8.62) 212.745 ms 213.827 ms 10.22.8.50 (10.22.8.50) 215.655 ms 14 10.22.8.62 (10.22.8.62) 211.665 ms !X 10.22.8.50 (10.22.8.50) 214.491 ms !X 10.22.8.54 (10.22.8.54) 218.471 ms !X Line 1,2 : It's me Line from 3-7: It's my Internet provider Line 8 and on: I think I hit MS servers WTF line 12-14 ????? 10.22.8.x ???? then I run this traceroute: sudo traceroute -T msdn.microsoft.com traceroute to msdn.microsoft.com (65.55.11.235), 30 hops max, 60 byte packets 1 10.0.0.138 (10.0.0.138) 0.109 ms 0.127 ms * 2 * * * 3 * * * 4 * * * 5 * * * 6 * 65.55.11.235 (65.55.11.235) 16.019 ms 17.364 ms So I hit MSDN web site already at 6 hop ! WTF ??? This is host -a msdn.microsoft.com from me: host -a msdn.microsoft.com Trying "msdn.microsoft.com" ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 19522 ;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;msdn.microsoft.com. IN ANY ;; ANSWER SECTION: msdn.microsoft.com. 3274 IN CNAME msdn.microsoft.akadns.net. msdn.microsoft.akadns.net. 600 IN A 65.55.11.235 Received 91 bytes from 127.0.0.1#53 in 108 ms Could someone help me understand and fix it ??

    Read the article

  • Add static route through DHCP

    - by MathieuK
    I'm trying to get an OSX Lion Server to provide a static route to its clients (all OSX Lion) over DHCP. I can't get the client to actually apply the static route. So far, I've managed to get the DHCP server (BOOTPD) to actually serve the DHCP OPTION 33 (static_route) on the DHCP offers by editing /etc/bootpd.plist and adding something like: <key>dhcp_option_33</key> <data>[some base64 goes here]</data> .. and restarting the DHCP service. On the client I've managed to get the client to actually request the dhcp option by modifying and adding option 33 to the DHCPRequestedParameterList key: <key>DHCPRequestedParameterList</key> <array> ... keys snipped for brevity ... <integer>33</integer> </array> .. and rebooting the client. This makes the client request the static_route option from the DHCP server ( i can see the proper output in ipconfig getpacket en0 ) but it doesn't actually apply the rule. Has anyone ever succeeded in applying static_route options on OSX clients through DHCP?

    Read the article

  • Standby Internet connection by means of 3G Modem if Internet Fails

    - by Sarah Boss
    In my office I have 4 computers connected to the Internet with a DIR-615 Wireless N 300 router which gives Internet to all pc's via Ethernet cable. But sometimes this Internet goes off and I have to call the ISP and it takes them 2 days to repair it. I wanted to know if in such cases, can I connect my two zte 3g usb modems to this DIR-615 Wirless N300 router and get emergency Internet in my office? What other steps are required to set up this fail-safe connection?

    Read the article

  • How to configure 2 LAN Cards

    - by PatDiazJr
    How do we configure two (2) LAN cards on one computer. One LAN card is connected to the internet via the DSL through a router, configured as DHCP. The other LAN card is to be connected via our office's IP/VPN (for email and other office online processes). I know it could be done, but I do not know how. By the way, the operating system is Windows XP.

    Read the article

  • VPN - Accessing computer outside of network. Only works one way

    - by Dan
    I could use some help here. My ideal goal is to create a VPN for 2 macs that are in different locations so that they can share each others screens and share files. I basically want to do what Logmein's Hamachi does, but without the 5 user limitation. I have set up the VPN on my Synology NAS at my house using the PPTP protocol. I could also use OpenVPN. The good news is that I can use a laptop outside of my home network to access any computer on my network at my house. The bad news is that I can not do the reverse. I want to use a computer in my home network (same network as the VPN server) to access a computer outside of my network (which is connected via VPN successfully). My internal IP is 192.168.1.xxx PPTP VPN assigns my laptop that is outside of my network with 192.168.5.xxx, but when I try to access it remotely either with afp://192.168.5.xxx or vnc://192.168.5.xxx I can't connect using either. Is this something that I should be able to do or is VPN only one way? I've also tried openvpn with the same results. Thanks for any help! -Dan

    Read the article

  • Monitoring/logging a malfunctioning internet connection

    - by Pekka
    I have a mysterious internet connection problem: Every 15-20 minutes, the connection will become very slow, and take 2-3 minutes for anything to load. I've had a technician from the ISP over here to test the hardware, and everything is in pristine condition. They have no other explanation than a configuration error on my machine, a possibility I can exclude 90% because I'm experiencing the same problems with another machine. I will have to monitor the situation now, and I would like to run a program that logs when internet connections become slow. I thought about putting something together using at and wget. Does anybody know of some other tool for this that does this out of the box - maybe something with an adjustable request frequency, logging connection speeds etc.?

    Read the article

  • Is it safe to leave a broadband router running 24/7?

    - by Anirvan
    My father-in-law's ISP warned him in the strictest possible terms to physically turn off his rented Nokia Siemens C2110 PPPoE broadband router when not in use. Everyone I know leaves their broadband router on all the time, and I've never heard of any negative impacts. Is leaving a consumer broadband router running 24/7 really problematic? Is the ISP in question being ridiculously paranoid?

    Read the article

  • Can't connect to domain computers until reboot

    - by thealliedhacker
    I have a domain with about 300 Windows 7 and XP machines, with the domain controllers running Server 2003. Sometimes, I lose the ability to communicate/authenticate with some of the machines until I reboot my computer. This also happens from other computers and regardless of user account and operating system. In other words, say I'm on ComputerA, and I can't connect to ComputerX. I can go to ComputerB and connect to ComputerX, but ComputerB may not be able to connect to ComputerY. If you reboot ComputerA, then it will be able to connect to ComputerX again. Here are some messages from various utilities: sc: [SC] OpenSCManager FAILED 1722: The RPC server is unavailable. mmc (compmgmt.msc): Computer (computer name) cannot be managed. The network path was not found. explorer (\\computer): Windows cannot access \\(computer name). ping: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) / Average = 1ms

    Read the article

  • Airport Express with a PC

    - by Margaret Ashcraft
    I have and airport express and my IMac works fine with the internet connection, but my husband's PC in the basement has problems. The wireless connection comes and goes. One minute it says good connection the next unavailable. I have a PC laptop that will pick up the connection in the basement just fine.

    Read the article

  • Vlans and subinterfaces

    - by Adeodatus
    I've inherited a moderate size network that I'm trying to bring some sanity to. Basically, its 8 public class Cs and a slew of private ranges all on one vlan (vlan1, of course). Most of the network is located throughout dark sites. I need to start separating some of the network. I've changed the ports from the main cisco switch (3560) to the cisco router (3825) and the other remote switches to trunking with dot1q encapsulation. I'd like to start moving a few select subnets to different vlans. To get some of the different services provided on our address space (and to separate customers) on to different vlans, do I need to create a subinterface on the router for each vlan and, if so, how do I get the switch port to work on a specific vlan? Keep in mind, these are dark sites and geting console access is difficult if not impossible at the moment. I was planning on creating a subinterface on the router for each vlan then setting the ports with services I want to move to a different vlan to allow only that vlan. Example of vlan3: 3825: interface GigabitEthernet0/1.3 description Vlan-3 encapsulation dot1Q 3 ip address 192.168.0.81 255.255.255.240 the connection between the switch and router: interface GigabitEthernet0/48 description Core-router switchport trunk encapsulation dot1q switchport mode trunk show interfaces gi0/48 switchport Name: Gi0/48 Switchport: Enabled Administrative Mode: trunk Operational Mode: trunk Administrative Trunking Encapsulation: dot1q Operational Trunking Encapsulation: dot1q Negotiation of Trunking: On Access Mode VLAN: 1 (default) Trunking Native Mode VLAN: 1 (default) Administrative Native VLAN tagging: enabled Voice VLAN: none Administrative private-vlan host-association: none Administrative private-vlan mapping: none Administrative private-vlan trunk native VLAN: none Administrative private-vlan trunk Native VLAN tagging: enabled Administrative private-vlan trunk encapsulation: dot1q Administrative private-vlan trunk normal VLANs: none Administrative private-vlan trunk private VLANs: none Operational private-vlan: none Trunking VLANs Enabled: ALL Pruning VLANs Enabled: 2-1001 Capture Mode Disabled Capture VLANs Allowed: ALL Protected: false Unknown unicast blocked: disabled Unknown multicast blocked: disabled Appliance trust: none So, if the boxen hanging off of gi0/18 on the 3560 are on an unmanaged layer2 switch and all within the 192.168.0.82-95 range and are using 192.168.0.81 as their gateway, what is left to do, especially to gi0/18, to get this working on vlan3? Are there any recommendations for a better setup without taking everything offline?

    Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >