Search Results

Search found 19299 results on 772 pages for 'off topic'.

Page 188/772 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

• Printer spools but doesn't print

  - by DKNUCKLES

  I am having a bizarre issue with an end user who is unable to print to a USB attached printer. The environment is as Windows 7 machine with a Canon Pixma iP90 printer. The driver is installed (and has been re-installed several times), but whenever a print job is sent the printer spools but no printing ever occurs. The following is some relevant information I can confirm that the printer is spooling as the spool folder fills up, and the job "releases" and the spool folder empties I have turned off print spooling with no luck None of the features from the Canon utilities (ie Turn Printer Off) features work Computer recognizes the printer as being installed. When the cable is unplugged the printer icon grey's out in Devices and Printers Printer and cable are confirmed working as they work with other PC's in the office I have deleted the USB Root Hub devices and rebooted the machine with no luck No error messages are displayed or logged in the event viewer. The Canon diagnostics utility doesn't detect any problem and states the printer is functioning properly Printer is not shared User is able to print to other shared printers in the office Any help with this issue would be greatly appreciated.

  Read the article

• External HDD connecting via USB disconnects wireless LAN connection

  - by Kensai

  Strange problem. I have this MEDION Akoya PC that has a dedicated bay to slide an external HDD sold separately. It's very handy indeed cause the slot is providing a fast USB 3 connection and power to the HDD unit, without extra cables. All works fine except this show-stopper behavior to disconnect me from the router once I slide in the unit and it powers up. The moment I connect the unit the (normally) three-four WiFi connections I see in my neighborhood disappear and my own to the router loses its signal strength (no Internet traffic is possible). After a while it throws me off that one as well, never to connect me again as long as the unit is powered. Once I disconnect the HDD the various signals come back and it automatically reconnects to my own. What takes? Are we in front of a serious design fault by MEDION here? Does the spinning of the HDD on top of the PC cause electromagnetic interference strong enough to throw off my WiFi connectivity? Is it a simple USB problem? Some kind of strange hardware conflict? Where should I look?

  Read the article

• Looking for a powershell script that can pull a file from a set of PC's and FTP

  - by DangeRuss

  I'm looking to write a script (preferably powershell) that will essentially copy a file from a bunch of PC's and FTP it to a server. So the structure of the environment is that we have a file on multiple PC's (around 50 or so) that need to placed on a server. Sometimes one of the PC's may be turned off so the script would first need to ensure the PC is up and running (maybe a ping result), then it would need to go into a directory on that PC, pull a file off of it, rename the file, place into a source directory, then remove the file. Naming convention doesn't matter, but date/time stamp would be easiest. Ideally, it would be best to first move all the files to a source directory to save on FTP bandwidth, but since the files will be named the same, the files must be renamed during the move process. Move not copy because the directory needs to be empty so the file can be re-created the next day. So once moved to the source directory, now all the files need to be FTP'd to a server for processing. After all of this, we need to know which PC's on the list did not respond so we can manually retrieve the file so the script should output a file (txt is fine) that will show which PC's were offline. Everything is one domain and script will be run from an server with admin creds. Thank you!

  Read the article

• Win7 taskbar freezes on startup for about 1-2 mins

  - by Mike

  Running Win7 64-bit for about 4 months now. Never had this problem, didn't install anything new recently. When I boot up I can't do anything in the taskbar, it's frozen for about 1-2 minutes then everything is normal. I can right click on my desktop and move my mouse around. This randomly just started happening a couple days ago after a reboot. I have a 3.2ghz quad, SSD, 4 gig ram, etc. and it usually starts up quickly. After some troubleshooting (including running antivirus and Anti-Malware), it doesn't appear to be software related, but appears to be services related. I can boot up in safe mode and safe mode with networking just fine. I can also boot up normally with all my regular software loading at startup, BUT with all my services turned off. Now the odd part. When I run msconfig to disable all the services at startup and go through ticking them on 5-10 at a time or so and booting up it seems to be somewhat random. Ticking everything on from "Application Experience" halfway down to about "Quality Windows Audio Video Experience" and I can boot without the 1-2 min. freeze. Then I start ticking the stuff below that from a couple of Remote Accesses to Smart Card and Task Scheduler, etc. But the weird part is sometimes it will freeze sometimes it won't. I can't narrow it down. Then if it freezes, I'll boot up in safe mode and turn the ones I just turned on back off and I'll reboot normally but it will freeze again. Which makes no sense because that configuration just worked without freezing just before. I got frustrated enough that I backed up and wiped my hard drive (formatted and everything) and reinstalled Win7 but when I booted up, the freeze happened again. Any ideas? Thanks in advance.

  Read the article

• Strange 3-second tcp connection latencies (Linux, HTTP)

  - by user25417

  Our webservers with static content are experiencing strange 3 second latencies occasionally. Typically, an ApacheBench run ( 10000 requests, concurrency 1 or 40, no difference, but keepalive off) looks like this: Connection Times (ms) min mean[+/-sd] median max Connect: 2 10 152.8 3 3015 Processing: 2 8 34.7 3 663 Waiting: 2 8 34.7 3 663 Total: 4 19 157.2 6 3222 Percentage of the requests served within a certain time (ms) 50% 6 66% 7 75% 7 80% 7 90% 9 95% 11 98% 223 99% 225 100% 3222 (longest request) I have tried many things: - Apache2 2.2.9 with worker or prefork MPM, no difference (with KeepAliveTimeout 10-15) - Nginx 0.6.32 - various tcp parameters (net.core.somaxconn=3000, net.ipv4.tcp_sack=0, net.ipv4.tcp_dsack=0) - putting the files/DocumentRoot on tmpfs - shorewall on or off (i.e. empty iptables or not) - AllowOverride None is on for /, so no .htaccess checks (verified with strace) - the problem persists whether the webservers are accessed directly or through a Foundry load balancer Kernel is 2.6.32 (Debian Lenny backports), but it occurred with 2.6.26 also. IPv6 is enabled, but not used. Does the issue look familiar to anyone? Help/suggestions are much appreciated. It sounds a bit like a SYN,ACK packet getting lost or ignored.

  Read the article

• Invisible Apache redirect

  - by Guilhem Soulas

  I would like subdomain.mydomain.com to invisibly redirect to https://[myServerIP]:2083. (There is an SSL issue here). So far I managed to do it, but the redirection is visible and I don't want it: RewriteCond %{HTTPS} off RewriteCond %{HTTP_HOST} ^subdomain.\.mydomain\.com$ RewriteRule ^ https://[myServerIP]:2083/ Would it be a way to achieve the same redirection while maintaining permanently my beautiful "subdomain.mydomain.com" in the address bar? EDIT with the ProxyPass directive: I tried some variations with ProxyPass but it will still change the URL in the address bar: ServerName subdomain.mydomain.com <Location /> ProxyPass https://[myServerIP]:2083/ ProxyPassReverse https://[myServerIP]:2083/ </Location> RewriteCond %{HTTPS} off RewriteCond %{HTTP_HOST} ^subdomain\.mydomain\.com$ RewriteRule ^ https://[myServerIP]:2083/ EDIT2: It still doesn't work: #non SSL ServerName subdomain.mydomain.com #SSL! <Location /> ProxyPass https://[myServerIP]:2083/ ProxyPassReverse https://[myServerIP]:2083/ </Location> EDIT3: It now works using the SSLProxyEngine directive: SSLProxyEngine on ServerName subdomain.mydomain.com <Location /> ProxyPass https://[myServerIP]:2083/ ProxyPassReverse https://[myServerIP]:2083/ </Location> I can now access my login interface (cPanel). However, once I'm logged in it doesn't redirect to the next page subdomain.mydomain.com/cpsess5850710203/.

  Read the article

• Data recovery on working hard drive

  - by emgee

  So I have a 5 bay hot swap SATA enclosure that's connected to a Silicon Image-based SATA adapter in a computer. It's running XP Pro. There are two 1.5TB hard drives in slots 1 and 2 respectively, set up using RAID 1 using the the Silicon Image utility. There are also two 1TB drives in bays 3 and 4, also set to RAID 1 the same way. The partitions for both RAID arrays are Dynamic partitions. A few days back, there was a bare hard drive that needed some files copied off of, so it was popped it in bay 5, that bay to pass-through, and the copied data off of it. Later, I noticed that my 1.5TB drives no longer showed up in windows. In the Silicon Image utility, the drives showed up fine, no error. However, in Device Manager, it shows the RAID 1 array as uninitialized. It shows up as the right size, etc., but nothing else. There's no sign of anything wrong with either drive, so I'm not sure what happened exactly. I'm not the only one who has access to that computer, so it is possible there is something else done to it that I don't know of. There's quite a lot of data on it still, and if at all possible, I'd prefer to not send it to Ontrack. Does anyone know of software that would restore the partitions, keeping in mind that it's a Windows LDM partition? I have access to a variety of Operating Systems, so something that would work on Mac, Windows or Linux would be acceptable. The programs I usually use are not compatible with LDM.

  Read the article

• How can I restore the registry keys from another C drive? (Windows 7 64bit)

  - by graham3d

  I ran Uniblue registry booster on my system which was working fine. It did a full back up of the registry keys. Now I cannot boot from that disk. I also cannot get into the BIOS! To restore the registry I have to run Uniblue registry booster from within windows. I cannot get there. I can boot up on another C drive, and can see the files on the drive with the problem. Is there any way I can find the Registry Booster backup files and restore it from the other disk? Or find the registry backup and upload it into the registry so I can boot off the other disk again? Or, Can I do a windows repair from the other disk? NB: not getting in to the bios means I cannot boot off the CD/DVD! (I can use the DVD drive from within windows) Any ideas? I do not want to reinstall everything yet again, it takes about 6 hours.

  Read the article

• Can you explain how to understand what the 'iwconfig' command displays in Ubuntu-9.04?

  - by Shawn

  I'm having trouble making my wireless connection work, and I realized I don't really know how to use the tools I have, in this case, the iwconfig command in Ubuntu-9.04. Here is what I get: ***iwconfig*** - lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Network" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=20 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 vboxnet0 no wireless extensions. pan0 no wireless extensions. "Network" is the name of my wireless network, btw. But what does this all mean? How can this information help me aquire a working wireless connection? When I try associating a key using sudo iwconfig wlan0 key s:my_key I get the following error message: Error for wireless request "Set Encode" (8B2A) : SET failed on device wlan0 ; Invalid argument. I do have the right key though, so what's the problem?

  Read the article

• Transferring files from ftp to local system

  - by Ramkrishnan

  I want to copy a file from FTP and save it to my local system. I want to run this through batch file. I am trying this for a week. But I couldn't find the solution. Anyone help me please.... This is my actual work Want to copy a file named "Friday.bat" from ftp://172.16.3.132 (with username and password) So i use the below codings: @echo off @ftp -i -s:"%~f0"&GOTO:EOF open 172.16.3.132 mmftp ((((pasword entered here))))) binary get Friday.bat pause Result: ftp> @echo off ftp> @ftp -i -s:"%~f0"&GOTO:EOF Invalid command. ftp> open 172.16.3.132 Connected to 172.16.3.132. 220 Welcome to ABL FTP service. User (172.16.3.132:(none)): 331 Please specify the password. 230 Login successful. ftp> binary 200 Switching to Binary mode. ftp> get Friday.bat 200 PORT command successful. Consider using PASV. 550 Failed to open file. ftp> pause Finally, a file named Friday.bat is copied to my local system with 0 bytes and I am not able to open it

  Read the article

• Nginx vhost configuration

  - by user101494

  I am attempting to setup a new server with Nginx 1.0.10 on debian 6. The config below works perfectly on a server with nginx 0.8.36 on Ubuntu 10.04.3 but not on the new box. The desired result is to: Redirect non-www request on the tld to www, but not not subdomains Use the the folder structure /var/www/[domain]/htdocs /var/www/[domain]/subdomains/[subdomain]/htdocs Serve files any host for which files exist in this structure On the new server domains are matching correctly but subdomains are matching to /var/www/[subdomain].[domain]/htdocs not /var/www/[domain]/subdomains/[subdomain]/htdocs server { listen 80; server_name _________ ~^[^.]+\.[^.]+$; rewrite ^(.*)$ $scheme://www.$host$1 permanent; } server { listen 80; server_name _ ~^www\.(?<domain>.+)$; server_name_in_redirect off; location / { root /var/www/$domain/htdocs; index index.html index.htm index.php; fastcgi_index index.php; } location ~ \.php$ { include /etc/nginx/fastcgi_params; keepalive_timeout 0; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } location ~ /\.ht { deny all; } } server { listen 80; server_name __ ~^(?<subdomain>\.)?(?<domain>.+)$$; server_name_in_redirect off; location / { root /var/www/$domain/subdomains/$subdomain/htdocs; index index.html index.htm index.php; fastcgi_index index.php; } location ~ \.php$ { include /etc/nginx/fastcgi_params; keepalive_timeout 0; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } location ~ /\.ht { deny all; } }

  Read the article

• Can you explain how to understand what the 'iwconfig' command displays in Ubuntu-9.04?

  - by Shawn

  I'm having trouble making my wireless connection work, and I realized I don't really know how to use the tools I have, in this case, the iwconfig command in Ubuntu-9.04. Here is what I get: ***iwconfig*** - lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Network" Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated Tx-Power=20 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 vboxnet0 no wireless extensions. pan0 no wireless extensions. "Network" is the name of my wireless network, btw. But what does this all mean? How can this information help me aquire a working wireless connection? When I try associating a key using sudo iwconfig wlan0 key s:my_key I get the following error message: Error for wireless request "Set Encode" (8B2A) : SET failed on device wlan0 ; Invalid argument. I do have the right key though, so what's the problem?

  Read the article

• Looking for a nice and handy bandwidth limiter

  - by Spirit

  Here's the thing. My ISP are f*gs. Most of the time the network is realy good, but then again there are times when it sucks. They say we have 20mbp/s. Me and my brother are usually playing dota and it's fine. One of us plays the other's watching streaming or both of us are playing or something like that. But sometimes like one of these days one is lagging even if the other is watching youtube at 360p quality. So I do know that there are many bandwidth limiters out there. But what could you recommend given my situation. I like both of us to be able to install it and it would be good idea to have something like ON/OFF switch. When he is not here I would like to turn that thing off. But when one of us plays I would like to turn it ON and whatever I do, to be limited to 10 or 8mbps. That way we will not interrupt each other. Thanks guys :)

  Read the article

• Can't login to Windows server 2008 (as any user, not even locally, not in safe mode but I have right credentials)

  - by Saix

  Just from nowhere I can't login to my Windows server 2008 machine. All the services like FTP server or webserver (which I'm actually not using, just remote desktop and FTP) are running. Whatever credentials I try (even/especialy administrator), it always says Unknown Username or bad password. I have already tried hard turn off/on and safe mode without luck. Also I already tried type in login name as SERVER NAME\user or Workgroup\user (every case sensitive scenario), still says I have wrong login. Usually we are using remote desktop to access the machine but local access over KVM doesn't work either. Now I'm lock out of any control or any way to do something. There's just logon screen preceding by ctrl+alt+del to login alert. Without me able to login I can't actually try to fix anything. Can't find much more on Internet except the SERVER NAME\user thing. Reinstall would be the last resort but I can't let things this way for much longer anyway. This server is vital. If it would be any help, I think automatic Windows updates are turned off and there were no updates or newly installed software for last couple years and just few soft restarts, non of them recently. It happened during it's runtime while all other services were still up and running, so this couldn't be just some Windows nasty screw up during boot or something. What could have possibly changed? What are my options now?

  Read the article

• Windows Azure: Import/Export Hard Drives, VM ACLs, Web Sockets, Remote Debugging, Continuous Delivery, New Relic, Billing Alerts and More

  - by ScottGu

  Two weeks ago we released a giant set of improvements to Windows Azure, as well as a significant update of the Windows Azure SDK. This morning we released another massive set of enhancements to Windows Azure.  Today’s new capabilities include: Storage: Import/Export Hard Disk Drives to your Storage Accounts HDInsight: General Availability of our Hadoop Service in the cloud Virtual Machines: New VM Gallery, ACL support for VIPs Web Sites: WebSocket and Remote Debugging Support Notification Hubs: Segmented customer push notification support with tag expressions TFS & GIT: Continuous Delivery Support for Web Sites + Cloud Services Developer Analytics: New Relic support for Web Sites + Mobile Services Service Bus: Support for partitioned queues and topics Billing: New Billing Alert Service that sends emails notifications when your bill hits a threshold you define All of these improvements are now available to use immediately (note that some features are still in preview).  Below are more details about them. Storage: Import/Export Hard Disk Drives to Windows Azure I am excited to announce the preview of our new Windows Azure Import/Export Service! The Windows Azure Import/Export Service enables you to move large amounts of on-premises data into and out of your Windows Azure Storage accounts. It does this by enabling you to securely ship hard disk drives directly to our Windows Azure data centers. Once we receive the drives we’ll automatically transfer the data to or from your Windows Azure Storage account.  This enables you to import or export massive amounts of data more quickly and cost effectively (and not be constrained by available network bandwidth). Encrypted Transport Our Import/Export service provides built-in support for BitLocker disk encryption – which enables you to securely encrypt data on the hard drives before you send it, and not have to worry about it being compromised even if the disk is lost/stolen in transit (since the content on the transported hard drives is completely encrypted and you are the only one who has the key to it).  The drive preparation tool we are shipping today makes setting up bitlocker encryption on these hard drives easy. How to Import/Export your first Hard Drive of Data You can read our Getting Started Guide to learn more about how to begin using the import/export service.  You can create import and export jobs via the Windows Azure Management Portal as well as programmatically using our Server Management APIs. It is really easy to create a new import or export job using the Windows Azure Management Portal.  Simply navigate to a Windows Azure storage account, and then click the new Import/Export tab now available within it (note: if you don’t have this tab make sure to sign-up for the Import/Export preview): Then click the “Create Import Job” or “Create Export Job” commands at the bottom of it.  This will launch a wizard that easily walks you through the steps required: For more comprehensive information about Import/Export, refer to Windows Azure Storage team blog.  You can also send questions and comments to the [email protected] email address. We think you’ll find this new service makes it much easier to move data into and out of Windows Azure, and it will dramatically cut down the network bandwidth required when working on large data migration projects.  We hope you like it. HDInsight: 100% Compatible Hadoop Service in the Cloud Last week we announced the general availability release of Windows Azure HDInsight. HDInsight is a 100% compatible Hadoop service that allows you to easily provision and manage Hadoop clusters for big data processing in Windows Azure.  This release is now live in production, backed by an enterprise SLA, supported 24x7 by Microsoft Support, and is ready to use for production scenarios. HDInsight allows you to use Apache Hadoop tools, such as Pig and Hive, to process large amounts of data in Windows Azure Blob Storage. Because data is stored in Windows Azure Blob Storage, you can choose to dynamically create Hadoop clusters only when you need them, and then shut them down when they are no longer required (since you pay only for the time the Hadoop cluster instances are running this provides a super cost effective way to use them).  You can create Hadoop clusters using either the Windows Azure Management Portal (see below) or using our PowerShell and Cross Platform Command line tools: The import/export hard drive support that came out today is a perfect companion service to use with HDInsight – the combination allows you to easily ingest, process and optionally export a limitless amount of data.  We’ve also integrated HDInsight with our Business Intelligence tools, so users can leverage familiar tools like Excel in order to analyze the output of jobs.  You can find out more about how to get started with HDInsight here. Virtual Machines: VM Gallery Enhancements Today’s update of Windows Azure brings with it a new Virtual Machine gallery that you can use to create new VMs in the cloud.  You can launch the gallery by doing New->Compute->Virtual Machine->From Gallery within the Windows Azure Management Portal: The new Virtual Machine Gallery includes some nice enhancements that make it even easier to use: Search: You can now easily search and filter images using the search box in the top-right of the dialog.  For example, simply type “SQL” and we’ll filter to show those images in the gallery that contain that substring. Category Tree-view: Each month we add more built-in VM images to the gallery.  You can continue to browse these using the “All” view within the VM Gallery – or now quickly filter them using the category tree-view on the left-hand side of the dialog.  For example, by selecting “Oracle” in the tree-view you can now quickly filter to see the official Oracle supplied images. MSDN and Supported checkboxes: With today’s update we are also introducing filters that makes it easy to filter out types of images that you may not be interested in. The first checkbox is MSDN: using this filter you can exclude any image that is not part of the Windows Azure benefits for MSDN subscribers (which have highly discounted pricing - you can learn more about the MSDN pricing here). The second checkbox is Supported: this filter will exclude any image that contains prerelease software, so you can feel confident that the software you choose to deploy is fully supported by Windows Azure and our partners. Sort options: We sort gallery images by what we think customers are most interested in, but sometimes you might want to sort using different views. So we’re providing some additional sort options, like “Newest,” to customize the image list for what suits you best. Pricing information: We now provide additional pricing information about images and options on how to cost effectively run them directly within the VM Gallery. The above improvements make it even easier to use the VM Gallery and quickly create launch and run Virtual Machines in the cloud. Virtual Machines: ACL Support for VIPs A few months ago we exposed the ability to configure Access Control Lists (ACLs) for Virtual Machines using Windows PowerShell cmdlets and our Service Management API. With today’s release, you can now configure VM ACLs using the Windows Azure Management Portal as well. You can now do this by clicking the new Manage ACL command in the Endpoints tab of a virtual machine instance: This will enable you to configure an ordered list of permit and deny rules to scope the traffic that can access your VM’s network endpoints. For example, if you were on a virtual network, you could limit RDP access to a Windows Azure virtual machine to only a few computers attached to your enterprise. Or if you weren’t on a virtual network you could alternatively limit traffic from public IPs that can access your workloads: Here is the default behaviors for ACLs in Windows Azure: By default (i.e. no rules specified), all traffic is permitted. When using only Permit rules, all other traffic is denied. When using only Deny rules, all other traffic is permitted. When there is a combination of Permit and Deny rules, all other traffic is denied. Lastly, remember that configuring endpoints does not automatically configure them within the VM if it also has firewall rules enabled at the OS level.  So if you create an endpoint using the Windows Azure Management Portal, Windows PowerShell, or REST API, be sure to also configure your guest VM firewall appropriately as well. Web Sites: Web Sockets Support With today’s release you can now use Web Sockets with Windows Azure Web Sites.  This feature enables you to easily integrate real-time communication scenarios within your web based applications, and is available at no extra charge (it even works with the free tier).  Higher level programming libraries like SignalR and socket.io are also now supported with it. You can enable Web Sockets support on a web site by navigating to the Configure tab of a Web Site, and by toggling Web Sockets support to “on”: Once Web Sockets is enabled you can start to integrate some really cool scenarios into your web applications.  Check out the new SignalR documentation hub on www.asp.net to learn more about some of the awesome scenarios you can do with it. Web Sites: Remote Debugging Support The Windows Azure SDK 2.2 we released two weeks ago introduced remote debugging support for Windows Azure Cloud Services. With today’s Windows Azure release we are extending this remote debugging support to also work with Windows Azure Web Sites. With live, remote debugging support inside of Visual Studio, you are able to have more visibility than ever before into how your code is operating live in Windows Azure. It is now super easy to attach the debugger and quickly see what is going on with your application in the cloud. Remote Debugging of a Windows Azure Web Site using VS 2013 Enabling the remote debugging of a Windows Azure Web Site using VS 2013 is really easy.  Start by opening up your web application’s project within Visual Studio. Then navigate to the “Server Explorer” tab within Visual Studio, and click on the deployed web-site you want to debug that is running within Windows Azure using the Windows Azure->Web Sites node in the Server Explorer.  Then right-click and choose the “Attach Debugger” option on it: When you do this Visual Studio will remotely attach the debugger to the Web Site running within Windows Azure.  The debugger will then stop the web site’s execution when it hits any break points that you have set within your web application’s project inside Visual Studio.  For example, below I set a breakpoint on the “ViewBag.Message” assignment statement within the HomeController of the standard ASP.NET MVC project template.  When I hit refresh on the “About” page of the web site within the browser, the breakpoint was triggered and I am now able to debug the app remotely using Visual Studio: Note above how we can debug variables (including autos/watchlist/etc), as well as use the Immediate and Command Windows. In the debug session above I used the Immediate Window to explore some of the request object state, as well as to dynamically change the ViewBag.Message property.  When we click the the “Continue” button (or press F5) the app will continue execution and the Web Site will render the content back to the browser.  This makes it super easy to debug web apps remotely. Tips for Better Debugging To get the best experience while debugging, we recommend publishing your site using the Debug configuration within Visual Studio’s Web Publish dialog. This will ensure that debug symbol information is uploaded to the Web Site which will enable a richer debug experience within Visual Studio.  You can find this option on the Web Publish dialog on the Settings tab: When you ultimately deploy/run the application in production we recommend using the “Release” configuration setting – the release configuration is memory optimized and will provide the best production performance.  To learn more about diagnosing and debugging Windows Azure Web Sites read our new Troubleshooting Windows Azure Web Sites in Visual Studio guide. Notification Hubs: Segmented Push Notification support with tag expressions In August we announced the General Availability of Windows Azure Notification Hubs - a powerful Mobile Push Notifications service that makes it easy to send high volume push notifications with low latency from any mobile app back-end.  Notification hubs can be used with any mobile app back-end (including ones built using our Mobile Services capability) and can also be used with back-ends that run in the cloud as well as on-premises. Beginning with the initial release, Notification Hubs allowed developers to send personalized push notifications to both individual users as well as groups of users by interest, by associating their devices with tags representing the logical target of the notification. For example, by registering all devices of customers interested in a favorite MLB team with a corresponding tag, it is possible to broadcast one message to millions of Boston Red Sox fans and another message to millions of St. Louis Cardinals fans with a single API call respectively. New support for using tag expressions to enable advanced customer segmentation With today’s release we are adding support for even more advanced customer targeting.  You can now identify customers that you want to send push notifications to by defining rich tag expressions. With tag expressions, you can now not only broadcast notifications to Boston Red Sox fans, but take that segmenting a step farther and reach more granular segments. This opens up a variety of scenarios, for example: Offers based on multiple preferences—e.g. send a game day vegetarian special to users tagged as both a Boston Red Sox fan AND a vegetarian Push content to multiple segments in a single message—e.g. rain delay information only to users who are tagged as either a Boston Red Sox fan OR a St. Louis Cardinal fan Avoid presenting subsets of a segment with irrelevant content—e.g. season ticket availability reminder to users who are tagged as a Boston Red Sox fan but NOT also a season ticket holder To illustrate with code, consider a restaurant chain app that sends an offer related to a Red Sox vs Cardinals game for users in Boston. Devices can be tagged by your app with location tags (e.g. “Loc:Boston”) and interest tags (e.g. “Follows:RedSox”, “Follows:Cardinals”), and then a notification can be sent by your back-end to “(Follows:RedSox || Follows:Cardinals) && Loc:Boston” in order to deliver an offer to all devices in Boston that follow either the RedSox or the Cardinals. This can be done directly in your server backend send logic using the code below: var notification = new WindowsNotification(messagePayload); hub.SendNotificationAsync(notification, "(Follows:RedSox || Follows:Cardinals) && Loc:Boston"); In your expressions you can use all Boolean operators: AND (&&), OR (||), and NOT (!).  Some other cool use cases for tag expressions that are now supported include: Social: To “all my group except me” - group:id && !user:id Events: Touchdown event is sent to everybody following either team or any of the players involved in the action: Followteam:A || Followteam:B || followplayer:1 || followplayer:2 … Hours: Send notifications at specific times. E.g. Tag devices with time zone and when it is 12pm in Seattle send to: GMT8 && follows:thaifood Versions and platforms: Send a reminder to people still using your first version for Android - version:1.0 && platform:Android For help on getting started with Notification Hubs, visit the Notification Hub documentation center.  Then download the latest NuGet package (or use the Notification Hubs REST APIs directly) to start sending push notifications using tag expressions.  They are really powerful and enable a bunch of great new scenarios. TFS & GIT: Continuous Delivery Support for Web Sites + Cloud Services With today’s Windows Azure release we are making it really easy to enable continuous delivery support with Windows Azure and Team Foundation Services.  Team Foundation Services is a cloud based offering from Microsoft that provides integrated source control (with both TFS and Git support), build server, test execution, collaboration tools, and agile planning support.  It makes it really easy to setup a team project (complete with automated builds and test runners) in the cloud, and it has really rich integration with Visual Studio. With today’s Windows Azure release it is now really easy to enable continuous delivery support with both TFS and Git based repositories hosted using Team Foundation Services.  This enables a workflow where when code is checked in, built successfully on an automated build server, and all tests pass on it – I can automatically have the app deployed on Windows Azure with zero manual intervention or work required. The below screen-shots demonstrate how to quickly setup a continuous delivery workflow to Windows Azure with a Git-based ASP.NET MVC project hosted using Team Foundation Services. Enabling Continuous Delivery to Windows Azure with Team Foundation Services The project I’m going to enable continuous delivery with is a simple ASP.NET MVC project whose source code I’m hosting using Team Foundation Services.  I did this by creating a “SimpleContinuousDeploymentTest” repository there using Git – and then used the new built-in Git tooling support within Visual Studio 2013 to push the source code to it.  Below is a screen-shot of the Git repository hosted within Team Foundation Services: I can access the repository within Visual Studio 2013 and easily make commits with it (as well as branch, merge and do other tasks).  Using VS 2013 I can also setup automated builds to take place in the cloud using Team Foundation Services every time someone checks in code to the repository: The cool thing about this is that I don’t have to buy or rent my own build server – Team Foundation Services automatically maintains its own build server farm and can automatically queue up a build for me (for free) every time someone checks in code using the above settings.  This build server (and automated testing) support now works with both TFS and Git based source control repositories. Connecting a Team Foundation Services project to Windows Azure Once I have a source repository hosted in Team Foundation Services with Automated Builds and Testing set up, I can then go even further and set it up so that it will be automatically deployed to Windows Azure when a source code commit is made to the repository (assuming the Build + Tests pass).  Enabling this is now really easy.  To set this up with a Windows Azure Web Site simply use the New->Compute->Web Site->Custom Create command inside the Windows Azure Management Portal.  This will create a dialog like below.  I gave the web site a name and then made sure the “Publish from source control” checkbox was selected: When we click next we’ll be prompted for the location of the source repository.  We’ll select “Team Foundation Services”: Once we do this we’ll be prompted for our Team Foundation Services account that our source repository is hosted under (in this case my TFS account is “scottguthrie”): When we click the “Authorize Now” button we’ll be prompted to give Windows Azure permissions to connect to the Team Foundation Services account.  Once we do this we’ll be prompted to pick the source repository we want to connect to.  Starting with today’s Windows Azure release you can now connect to both TFS and Git based source repositories.  This new support allows me to connect to the “SimpleContinuousDeploymentTest” respository we created earlier: Clicking the finish button will then create the Web Site with the continuous delivery hooks setup with Team Foundation Services.  Now every time someone pushes source control to the repository in Team Foundation Services, it will kick off an automated build, run all of the unit tests in the solution , and if they pass the app will be automatically deployed to our Web Site in Windows Azure.  You can monitor the history and status of these automated deployments using the Deployments tab within the Web Site: This enables a really slick continuous delivery workflow, and enables you to build and deploy apps in a really nice way. Developer Analytics: New Relic support for Web Sites + Mobile Services With today’s Windows Azure release we are making it really easy to enable Developer Analytics and Monitoring support with both Windows Azure Web Site and Windows Azure Mobile Services.  We are partnering with New Relic, who provide a great dev analytics and app performance monitoring offering, to enable this - and we have updated the Windows Azure Management Portal to make it really easy to configure. Enabling New Relic with a Windows Azure Web Site Enabling New Relic support with a Windows Azure Web Site is now really easy.  Simply navigate to the Configure tab of a Web Site and scroll down to the “developer analytics” section that is now within it: Clicking the “add-on” button will display some additional UI.  If you don’t already have a New Relic subscription, you can click the “view windows azure store” button to obtain a subscription (note: New Relic has a perpetually free tier so you can enable it even without paying anything): Clicking the “view windows azure store” button will launch the integrated Windows Azure Store experience we have within the Windows Azure Management Portal.  You can use this to browse from a variety of great add-on services – including New Relic: Select “New Relic” within the dialog above, then click the next button, and you’ll be able to choose which type of New Relic subscription you wish to purchase.  For this demo we’ll simply select the “Free Standard Version” – which does not cost anything and can be used forever:  Once we’ve signed-up for our New Relic subscription and added it to our Windows Azure account, we can go back to the Web Site’s configuration tab and choose to use the New Relic add-on with our Windows Azure Web Site.  We can do this by simply selecting it from the “add-on” dropdown (it is automatically populated within it once we have a New Relic subscription in our account): Clicking the “Save” button will then cause the Windows Azure Management Portal to automatically populate all of the needed New Relic configuration settings to our Web Site: Deploying the New Relic Agent as part of a Web Site The final step to enable developer analytics using New Relic is to add the New Relic runtime agent to our web app.  We can do this within Visual Studio by right-clicking on our web project and selecting the “Manage NuGet Packages” context menu: This will bring up the NuGet package manager.  You can search for “New Relic” within it to find the New Relic agent.  Note that there is both a 32-bit and 64-bit edition of it – make sure to install the version that matches how your Web Site is running within Windows Azure (note: you can configure your Web Site to run in either 32-bit or 64-bit mode using the Web Site’s “Configuration” tab within the Windows Azure Management Portal): Once we install the NuGet package we are all set to go.  We’ll simply re-publish the web site again to Windows Azure and New Relic will now automatically start monitoring the application Monitoring a Web Site using New Relic Now that the application has developer analytics support with New Relic enabled, we can launch the New Relic monitoring portal to start monitoring the health of it.  We can do this by clicking on the “Add Ons” tab in the left-hand side of the Windows Azure Management Portal.  Then select the New Relic add-on we signed-up for within it.  The Windows Azure Management Portal will provide some default information about the add-on when we do this.  Clicking the “Manage” button in the tray at the bottom will launch a new browser tab and single-sign us into the New Relic monitoring portal associated with our account: When we do this a new browser tab will launch with the New Relic admin tool loaded within it: We can now see insights into how our app is performing – without having to have written a single line of monitoring code.  The New Relic service provides a ton of great built-in monitoring features allowing us to quickly see: Performance times (including browser rendering speed) for the overall site and individual pages.  You can optionally set alert thresholds to trigger if the speed does not meet a threshold you specify. Information about where in the world your customers are hitting the site from (and how performance varies by region) Details on the latency performance of external services your web apps are using (for example: SQL, Storage, Twitter, etc) Error information including call stack details for exceptions that have occurred at runtime SQL Server profiling information – including which queries executed against your database and what their performance was And a whole bunch more… The cool thing about New Relic is that you don’t need to write monitoring code within your application to get all of the above reports (plus a lot more).  The New Relic agent automatically enables the CLR profiler within applications and automatically captures the information necessary to identify these.  This makes it super easy to get started and immediately have a rich developer analytics view for your solutions with very little effort. If you haven’t tried New Relic out yet with Windows Azure I recommend you do so – I think you’ll find it helps you build even better cloud applications.  Following the above steps will help you get started and deliver you a really good application monitoring solution in only minutes. Service Bus: Support for partitioned queues and topics With today’s release, we are enabling support within Service Bus for partitioned queues and topics. Enabling partitioning enables you to achieve a higher message throughput and better availability from your queues and topics. Higher message throughput is achieved by implementing multiple message brokers for each partitioned queue and topic.  The  multiple messaging stores will also provide higher availability. You can create a partitioned queue or topic by simply checking the Enable Partitioning option in the custom create wizard for a Queue or Topic: Read this article to learn more about partitioned queues and topics and how to take advantage of them today. Billing: New Billing Alert Service Today’s Windows Azure update enables a new Billing Alert Service Preview that enables you to get proactive email notifications when your Windows Azure bill goes above a certain monetary threshold that you configure.  This makes it easier to manage your bill and avoid potential surprises at the end of the month. With the Billing Alert Service Preview, you can now create email alerts to monitor and manage your monetary credits or your current bill total.  To set up an alert first sign-up for the free Billing Alert Service Preview.  Then visit the account management page, click on a subscription you have setup, and then navigate to the new Alerts tab that is available: The alerts tab allows you to setup email alerts that will be sent automatically once a certain threshold is hit.  For example, by clicking the “add alert” button above I can setup a rule to send myself email anytime my Windows Azure bill goes above $100 for the month: The Billing Alert Service will evolve to support additional aspects of your bill as well as support multiple forms of alerts such as SMS.  Try out the new Billing Alert Service Preview today and give us feedback. Summary Today’s Windows Azure release enables a ton of great new scenarios, and makes building applications hosted in the cloud even easier. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today.  Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Upgrading from TFS 2010 RC to TFS 2010 RTM done

  - by Martin Hinshelwood

  Today is the big day, with the Launch of Visual Studio 2010 already done in Asia, and rolling around the world towards us, we are getting ready for the RTM (Released). We have had TFS 2010 in Production for nearly 6 months and have had only minimal problems. Update 12th April 2010  – Added Scott Hanselman’s tweet about the MSDN download release time. SSW was the first company in the world outside of Microsoft to deploy Visual Studio 2010 Team Foundation Server to production, not once, but twice. I am hoping to make it 3 in a row, but with all the hype around the new version, and with it being a production release and not just a go-live, I think there will be a lot of competition. Developers: MSDN will be updated with #vs2010 downloads and details at 10am PST *today*! @shanselman - Scott Hanselman Same as before, we need to Uninstall 2010 RC and install 2010 RTM. The installer will take care of all the complexity of actually upgrading any schema changes. If you are upgrading from TFS 2008 to TFS2010 you can follow our Rules To Better TFS 2010 Migration and read my post on our successes.   We run TFS 2010 in a Hyper-V virtual environment, so we have the advantage of running a snapshot as well as taking a DB backup. Done - Snapshot the hyper-v server Microsoft does not support taking a snapshot of a running server, for very good reason, and Brian Harry wrote a post after my last upgrade with the reason why you should never snapshot a running server. Done - Uninstall Visual Studio Team Explorer 2010 RC You will need to uninstall all of the Visual Studio 2010 RC client bits that you have on the server. Done - Uninstall TFS 2010 RC Done - Install TFS 2010 RTM Done - Configure TFS 2010 RTM Pick the Upgrade option and point it at your existing “tfs_Configuration” database to load all of the existing settings Done - Upgrade the SharePoint Extensions Upgrade Build Servers (Pending) Test the server The back out plan, and you should always have one, is to restore the snapshot. Upgrading to Team Foundation Server 2010 – Done The first thing you need to do is off the TFS server and then log into the Hyper-v server and create a snapshot. Figure: Make sure you turn the server off and delete all old snapshots before you take a new one I noticed that the snapshot that was taken before the Beta 2 to RC upgrade was still there. You should really delete old snapshots before you create a new one, but in this case the SysAdmin (who is currently tucked up in bed) asked me not to. I guess he is worried about a developer messing up his server Turn your server on and wait for it to boot in anticipation of all the nice shiny RTM’ness that is coming next. The upgrade procedure for TFS2010 is to uninstal the old version and install the new one. Figure: Remove Visual Studio 2010 Team Foundation Server RC from the system.   Figure: Most of the heavy lifting is done by the Uninstaller, but make sure you have removed any of the client bits first. Specifically Visual Studio 2010 or Team Explorer 2010.  Once the uninstall is complete, this took around 5 minutes for me, you can begin the install of the RTM. Running the 64 bit OS will allow the application to use more than 2GB RAM, which while not common may be of use in heavy load situations. Figure: It is always recommended to install the 64bit version of a server application where possible. I do not think it is likely, with SharePoint 2010 and Exchange 2010  and even Windows Server 2008 R2 being 64 bit only, I do not think there will be another release of a server app that is 32bit. You then need to choose what it is you want to install. This depends on how you are running TFS and on how many servers. In our case we run TFS and the Team Foundation Build Service (controller only) on out TFS server along with Analysis services and Reporting Services. But our SharePoint server lives elsewhere. Figure: This always confuses people, but in reality it makes sense. Don’t install what you do not need. Every extra you install has an impact of performance. If you are integrating with SharePoint you will need to run this install on every Front end server in your farm and don’t forget to upgrade your Build servers and proxy servers later. Figure: Selecting only Team Foundation Server (TFS) and Team Foundation Build Services (TFBS)   It is worth noting that if you have a lot of builds kicking off, and hence a lot of get operations against your TFS server, you can use a proxy server to cache the source control on another server in between your TFS server and your build servers. Figure: Installing Microsoft .NET Framework 4 takes the most time. Figure: Now run Windows Update, and SSW Diagnostic to make sure all your bits and bobs are up to date. Note: SSW Diagnostic will check your Power Tools, Add-on’s, Check in Policies and other bits as well. Configure Team Foundation Server 2010 – Done Now you can configure the server. If you have no key you will need to pick “Install a Trial Licence”, but it is only £500, or free with a MSDN subscription. Anyway, if you pick Trial you get 90 days to get your key. Figure: You can pick trial and add your key later using the TFS Server Admin. Here is where the real choices happen. We are doing an Upgrade from a previous version, so I will pick Upgrade the same as all you folks that are using the RC or TFS 2008. Figure: The upgrade wizard takes your existing 2010 or 2008 databases and upgraded them to the release.   Once you have entered your database server name you can click “List available databases” and it will show what it can upgrade. Figure: Select your database from the list and at this point, make sure you have a valid backup. At this point you have not made ANY changes to the databases. At this point the configuration wizard will load configuration from your existing database if you have one. If you are upgrading TFS 2008 refer to Rules To Better TFS 2010 Migration. Mostly during the wizard the default values will suffice, but depending on the configuration you want you can pick different options. Figure: Set the application tier account and Authentication method to use. We use NTLM to keep things simple as we host our TFS server externally for our remote developers.  Figure: Setting your TFS server URL’s to be the remote URL’s allows the reports to be accessed without using VPN. Very handy for those remote developers. Figure: Detected the existing Warehouse no problem. Figure: Again we love green ticks. It gives us a warm fuzzy feeling. Figure: The username for connecting to Reporting services should be a domain account (if you are on a domain that is). Figure: Setup the SharePoint integration to connect to your external SharePoint server. You can take the option to connect later.   You then need to run all of your readiness checks. These check can save your life! it will check all of the settings that you have entered as well as checking all the external services are configures and running properly. There are two reasons that TFS 2010 is so easy and painless to install where previous version were not. Microsoft changes the install to two steps, Install and configuration. The second reason is that they have pulled out all of the stops in making the install run all the checks necessary to make sure that once you start the install that it will complete. if you find any errors I recommend that you report them on http://connect.microsoft.com so everyone can benefit from your misery.   Figure: Now we have everything setup the configuration wizard can do its work.  Figure: Took a while on the “Web site” stage for some point, but zipped though after that.  Figure: last wee bit. TFS Needs to do a little tinkering with the data to complete the upgrade. Figure: All upgraded. I am not worried about the yellow triangle as SharePoint was being a little silly Exception Message: TF254021: The account name or password that you specified is not valid. (type TfsAdminException) Exception Stack Trace:    at Microsoft.TeamFoundation.Management.Controls.WizardCommon.AccountSelectionControl.TestLogon(String connectionString)    at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) [Info   @16:10:16.307] Benign exception caught as part of verify: Exception Message: TF255329: The following site could not be accessed: http://projects.ssw.com.au/. The server that you specified did not return the expected response. Either you have not installed the Team Foundation Server Extensions for SharePoint Products on this server, or a firewall is blocking access to the specified site or the SharePoint Central Administration site. For more information, see the Microsoft Web site (http://go.microsoft.com/fwlink/?LinkId=161206). (type TeamFoundationServerException) Exception Stack Trace:    at Microsoft.TeamFoundation.Client.SharePoint.WssUtilities.VerifyTeamFoundationSharePointExtensions(ICredentials credentials, Uri url)    at Microsoft.TeamFoundation.Admin.VerifySharePointSitesUrl.Verify() Inner Exception Details: Exception Message: TF249064: The following Web service returned an response that is not valid: http://projects.ssw.com.au/_vti_bin/TeamFoundationIntegrationService.asmx. This Web service is used for the Team Foundation Server Extensions for SharePoint Products. Either the extensions are not installed, the request resulted in HTML being returned, or there is a problem with the URL. Verify that the following URL points to a valid SharePoint Web application and that the application is available: http://projects.ssw.com.au. If the URL is correct and the Web application is operating normally, verify that a firewall is not blocking access to the Web application. (type TeamFoundationServerInvalidResponseException) Exception Data Dictionary: ResponseStatusCode = InternalServerError I’ll look at SharePoint after, probably the SharePoint box just needs a restart or a kick If there is a problem with SharePoint it will come out in testing, But I will definatly be passing this on to Microsoft.   Upgrading the SharePoint connector to TFS 2010 You will need to upgrade the Extensions for SharePoint Products and Technologies on all of your SharePoint farm front end servers. To do this uninstall  the TFS 2010 RC from it in the same way as the server, and then install just the RTM Extensions. Figure: Only install the SharePoint Extensions on your SharePoint front end servers. TFS 2010 supports both SharePoint 2007 and SharePoint 2010.   Figure: When you configure SharePoint it uploads all of the solutions and templates. Figure: Everything is uploaded Successfully. Figure: TFS even remembered the settings from the previous installation, fantastic.   Upgrading the Team Foundation Build Servers to TFS 2010 Just like on the SharePoint servers you will need to upgrade the Build Server to the RTM. Just uninstall TFS 2010 RC and then install only the Team Foundation Build Services component. Unlike on the SharePoint server you will probably have some version of Visual Studio installed. You will need to remove this as well. (Coming Soon) Connecting Visual Studio 2010 / 2008 / 2005 and Eclipse to TFS2010 If you have developers still on Visual Studio 2005 or 2008 you will need do download the respective compatibility pack: Visual Studio Team System 2005 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 Visual Studio Team System 2008 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 If you are using Eclipse you can download the new Team Explorer Everywhere install for connecting to TFS. Get your developers to check that you have the latest version of your applications with SSW Diagnostic which will check for Service Packs and hot fixes to Visual Studio as well.   Technorati Tags: TFS,TFS2010,TFS 2010,Upgrade

  Read the article

• Upgrading Team Foundation Server 2008 to 2010

  - by Martin Hinshelwood

  I am sure you will have seen my posts on upgrading our internal Team Foundation Server from TFS2008 to TFS2010 Beta 2, RC and RTM, but what about a fresh upgrade of TFS2008 to TFS2010 using the RTM version of TFS. One of our clients is taking the plunge with TFS2010, so I have the job of doing the upgrade. It is sometimes very useful to have a team member that starts work when most of the Sydney workers are heading home as I can do the upgrade without impacting them. The down side is that if you have any blockers then you can be pretty sure that everyone that can deal with your problem is asleep I am starting with an existing blank installation of TFS 2010, but Adam Cogan let slip that he was the one that did the install so I thought it prudent to make sure that it was OK. Verifying Team Foundation Server 2010 We need to check that TFS 2010 has been installed correctly. First, check the Admin console and have a root about for any errors. Figure: Even the SQL Setup looks good. I don’t know how Adam did it! Backing up the Team Foundation Server 2008 Databases As we are moving from one server to another (recommended method) we will be taking a backup of our TFS2008 databases and resorting them to the SQL Server for the new TFS2010 Server. Do not just detach and reattach. This will cause problems with the version of the database. If you are running a test migration you just need to create a backup of the TFS 2008 databases, but if you are doing the live migration then you should stop IIS on the TFS 2008 server before you backup the databases. This will stop any inadvertent check-ins or changes to TFS 2008. Figure: Stop IIS before you take a backup to prevent any TFS 2008 changes being written to the database. It is good to leave a little time between taking the TFS 2008 server offline and commencing the upgrade as there is always one developer who has not finished and starts screaming. This time it was John Liu that needed 10 more minutes to make his changes and check-in, so I always give it 30 minutes and see if anyone screams. John Liu [SSW] said:   are you doing something to TFS :-O MrHinsh [SSW UK][VS ALM MVP] said:   I have stopped TFS 2008 as per my emails John Liu [SSW] said:   haven't finish check in @_@   can we have it for 10mins? :) MrHinsh [SSW UK][VS ALM MVP] said:   TFS 2008 has been started John Liu [SSW] said:   I love you! -IM conversation at TFS Upgrade +25 minutes After John confirmed that he had everything done I turned IIS off again and made a cup of tea. There were no more screams so the upgrade can continue. Figure: Backup all of the databases for TFS and include the Reporting Services, just in case.   Figure: Check that all the backups have been taken Once you have your backups, you need to copy them to your new TFS2010 server and restore them. This is a good way to proceed as if we have any problems, or just plain run out of time, then you just turn the TFS 2008 server back on and all you have lost is one upgrade day, and not 10 developer days. As per the rules, you should record the number of files and the total number of areas and iterations before the upgrade so you have something to compare to: TFS2008 File count: Type Count 1 1845 2 15770 Areas & Iterations: 139 You can use this to verify that the upgrade was successful. it should however be noted that the numbers in TFS 2010 will be bigger. This is due to some of the sorting out that TFS does during the upgrade process. Restore Team Foundation Server 2008 Databases Restoring the databases is much more time consuming than just attaching them as you need to do them one at a time. But you may be taking a backup of an operational database and need to restore all your databases to a particular point in time instead of to the latest. I am doing latest unless I encounter any problems. Figure: Restore each of the databases to either a latest or specific point in time.     Figure: Restore all of the required databases Now that all of your databases are restored you now need to upgrade them to Team Foundation Server 2010. Upgrade Team Foundation Server 2008 Databases This is probably the easiest part of the process. You need to call a fire and forget command that will go off to the database specified, find the TFS 2008 databases and upgrade them to 2010. During this process all of the 6 main TFS 2008 databases are merged into the TfsVersionControl database, upgraded and then the database is renamed to TFS_[CollectionName]. The rename is only the database and not the physical files, so it is worth going back and renaming the physical file as well. This keeps everything neat and tidy. If you plan to keep the old TFS 2008 server around, for example if you are doing a test migration first, then you will need to change the TFS GUID. This GUID is unique to each TFS instance and is preserved when you upgrade. This GUID is used by the clients and they can get a little confused if there are two servers with the same one. To kick of the upgrade you need to open a command prompt and change the path to “C:\Program Files\Microsoft Team Foundation Server 2010\Tools” and run the “import” command in  “tfsconfig”. TfsConfig import /sqlinstance:<Previous TFS Data Tier>                  /collectionName:<Collection Name>                  /confirmed Imports a TFS 2005 or 2008 data tier as a new project collection. Important: This command should only be executed after adequate backups have been performed. After you import, you will need to configure portal and reporting settings via the administration console. EXAMPLES -------- TfsConfig import /sqlinstance:tfs2008sql /collectionName:imported /confirmed TfsConfig import /sqlinstance:tfs2008sql\Instance /collectionName:imported /confirmed OPTIONS: -------- sqlinstance         The sql instance of the TFS 2005 or 2008 data tier. The TFS databases at that location will be modified directly and will no longer be usable as previous version databases.  Ensure you have back-ups. collectionName      The name of the new Team Project Collection. confirmed           Confirm that you have backed-up databases before importing. This command will automatically look for the TfsIntegration database and verify that all the other required databases exist. In this case it took around 5 minutes to complete the upgrade as the total database size was under 700MB. This was unlike the upgrade of SSW’s production database with over 17GB of data which took a few hours. At the end of the process you should get no errors and no warnings. The Upgrade operation on the ApplicationTier feature has completed. There were 0 errors and 0 warnings. As this is a new server and not a pure upgrade there should not be a problem with the GUID. If you think at any point you will be doing this more than once, for example doing a test migration, or merging many TFS 2008 instances into a single one, then you should go back and rename the physical TfsVersionControl.mdf file to the same as the new collection. This will avoid confusion later down the line. To do this, detach the new collection from the server and rename the physical files. Then reattach and change the physical file locations to match the new name. You can follow http://www.mssqltips.com/tip.asp?tip=1122 for a more detailed explanation of how to do this. Figure: Stop the collection so TFS does not take a wobbly when we detach the database. When you try to start the new collection again you will get a conflict with project names and will require to remove the Test Upgrade collection. This is fine and it just needs detached. Figure: Detaching the test upgrade from the new Team Foundation Server 2010 so we can start the new Collection again. You will now be able to start the new upgraded collection and you are ready for testing. Do you remember the stats we took off the TFS 2008 server? TFS2008 File count: Type Count 1 1845 2 15770 Areas & Iterations: 139 Well, now we need to compare them to the TFS 2010 stats, remembering that there will probably be more files under source control. TFS2010 File count: Type Count 1 19288 Areas & Iterations: 139 Lovely, the number of iterations are the same, and the number of files is bigger. Just what we were looking for. Testing the upgraded Team Foundation Server 2010 Project Collection Can we connect to the new collection and project? Figure: We can connect to the new collection and project.   Figure: make sure you can connect to The upgraded projects and that you can see all of the files. Figure: Team Web Access is there and working. Note that for Team Web Access you now use the same port and URL as for TFS 2010. So in this case as I am running on the local box you need to use http://localhost:8080/tfs which will redirect you to http://localhost:8080/tfs/web for the web access. If you need to connect with a Visual Studio 2008 client you will need to use the full path of the new collection, http://[servername]/tfs/[collectionname] and this will work with all of your collections. With Visual Studio 2005 you will only be able to connect to the Default collection and in both VS2008 and VS2005 you will need to install the forward compatibility updates. Visual Studio Team System 2005 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 Visual Studio Team System 2008 Service Pack 1 Forward Compatibility Update for Team Foundation Server 2010 To make sure that you have everything up to date, make sure that you run SSW Diagnostics and get all green ticks. Upgrade Done! At this point you can send out a notice to everyone that the upgrade is complete and and give them the connection details. You need to remember that at this stage we have 2008 project upgraded to run under TFS 2010 but it is still running under that same process template that it was running before. You can only “enable” 2010 features in a process template you can’t upgrade. So what to do? Well, you need to create a new project and migrate things you want to keep across. Souse code is easy, you can move or Branch, but Work Items are more difficult as you can’t move them between projects. This instance is complicated more as the old project uses the Conchango/EMC Scrum for Team System template and I will need to write a script/application to get the work items across with their attachments in tact. That is my next task! Technorati Tags: TFS 2010,TFS 2008,VS ALM

  Read the article

• External HDD USB 3.0 failure

  - by Philip

  [ 2560.376113] usb 9-1: new high-speed USB device number 2 using xhci_hcd [ 2560.376186] usb 9-1: Device not responding to set address. [ 2560.580136] usb 9-1: Device not responding to set address. [ 2560.784104] usb 9-1: device not accepting address 2, error -71 [ 2560.840127] hub 9-0:1.0: unable to enumerate USB device on port 1 [ 2561.080182] usb 10-1: new SuperSpeed USB device number 5 using xhci_hcd [ 2566.096163] usb 10-1: device descriptor read/8, error -110 [ 2566.200096] usb 10-1: new SuperSpeed USB device number 5 using xhci_hcd [ 2571.216175] usb 10-1: device descriptor read/8, error -110 [ 2571.376138] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2571.744174] usb 10-1: new SuperSpeed USB device number 7 using xhci_hcd [ 2576.760116] usb 10-1: device descriptor read/8, error -110 [ 2576.864074] usb 10-1: new SuperSpeed USB device number 7 using xhci_hcd [ 2581.880153] usb 10-1: device descriptor read/8, error -110 [ 2582.040123] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2582.224139] hub 9-0:1.0: unable to enumerate USB device on port 1 [ 2582.464177] usb 10-1: new SuperSpeed USB device number 9 using xhci_hcd [ 2587.480122] usb 10-1: device descriptor read/8, error -110 [ 2587.584079] usb 10-1: new SuperSpeed USB device number 9 using xhci_hcd [ 2592.600150] usb 10-1: device descriptor read/8, error -110 [ 2592.760134] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2593.128175] usb 10-1: new SuperSpeed USB device number 11 using xhci_hcd [ 2598.144183] usb 10-1: device descriptor read/8, error -110 [ 2598.248109] usb 10-1: new SuperSpeed USB device number 11 using xhci_hcd [ 2603.264171] usb 10-1: device descriptor read/8, error -110 [ 2603.480157] usb 10-1: new SuperSpeed USB device number 12 using xhci_hcd [ 2608.496162] usb 10-1: device descriptor read/8, error -110 [ 2608.600091] usb 10-1: new SuperSpeed USB device number 12 using xhci_hcd [ 2613.616166] usb 10-1: device descriptor read/8, error -110 [ 2613.832170] usb 10-1: new SuperSpeed USB device number 13 using xhci_hcd [ 2618.848135] usb 10-1: device descriptor read/8, error -110 [ 2618.952079] usb 10-1: new SuperSpeed USB device number 13 using xhci_hcd [ 2623.968155] usb 10-1: device descriptor read/8, error -110 [ 2624.184176] usb 10-1: new SuperSpeed USB device number 14 using xhci_hcd [ 2629.200124] usb 10-1: device descriptor read/8, error -110 [ 2629.304075] usb 10-1: new SuperSpeed USB device number 14 using xhci_hcd [ 2634.320172] usb 10-1: device descriptor read/8, error -110 [ 2634.424135] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2634.776186] usb 10-1: new SuperSpeed USB device number 15 using xhci_hcd [ 2639.792105] usb 10-1: device descriptor read/8, error -110 [ 2639.896090] usb 10-1: new SuperSpeed USB device number 15 using xhci_hcd [ 2644.912172] usb 10-1: device descriptor read/8, error -110 [ 2645.128174] usb 10-1: new SuperSpeed USB device number 16 using xhci_hcd [ 2650.144160] usb 10-1: device descriptor read/8, error -110 [ 2650.248062] usb 10-1: new SuperSpeed USB device number 16 using xhci_hcd [ 2655.264120] usb 10-1: device descriptor read/8, error -110 [ 2655.480182] usb 10-1: new SuperSpeed USB device number 17 using xhci_hcd [ 2660.496121] usb 10-1: device descriptor read/8, error -110 [ 2660.600086] usb 10-1: new SuperSpeed USB device number 17 using xhci_hcd [ 2665.616167] usb 10-1: device descriptor read/8, error -110 [ 2665.832177] usb 10-1: new SuperSpeed USB device number 18 using xhci_hcd [ 2670.848110] usb 10-1: device descriptor read/8, error -110 [ 2670.952066] usb 10-1: new SuperSpeed USB device number 18 using xhci_hcd [ 2675.968081] usb 10-1: device descriptor read/8, error -110 [ 2676.072124] hub 10-0:1.0: unable to enumerate USB device on port 1 [ 2786.104531] xhci_hcd 0000:02:00.0: remove, state 4 [ 2786.104546] usb usb10: USB disconnect, device number 1 [ 2786.104686] xHCI xhci_drop_endpoint called for root hub [ 2786.104692] xHCI xhci_check_bandwidth called for root hub [ 2786.104942] xhci_hcd 0000:02:00.0: USB bus 10 deregistered [ 2786.105054] xhci_hcd 0000:02:00.0: remove, state 4 [ 2786.105065] usb usb9: USB disconnect, device number 1 [ 2786.105176] xHCI xhci_drop_endpoint called for root hub [ 2786.105181] xHCI xhci_check_bandwidth called for root hub [ 2786.109787] xhci_hcd 0000:02:00.0: USB bus 9 deregistered [ 2786.110134] xhci_hcd 0000:02:00.0: PCI INT A disabled [ 2794.268445] pci 0000:02:00.0: [1b73:1000] type 0 class 0x000c03 [ 2794.268483] pci 0000:02:00.0: reg 10: [mem 0x00000000-0x0000ffff] [ 2794.268689] pci 0000:02:00.0: PME# supported from D0 D3hot [ 2794.268700] pci 0000:02:00.0: PME# disabled [ 2794.276383] pci 0000:02:00.0: BAR 0: assigned [mem 0xd7800000-0xd780ffff] [ 2794.276398] pci 0000:02:00.0: BAR 0: set to [mem 0xd7800000-0xd780ffff] (PCI address [0xd7800000-0xd780ffff]) [ 2794.276419] pci 0000:02:00.0: no hotplug settings from platform [ 2794.276658] xhci_hcd 0000:02:00.0: enabling device (0000 -> 0002) [ 2794.276675] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2794.276762] xhci_hcd 0000:02:00.0: setting latency timer to 64 [ 2794.276771] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2794.276913] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9 [ 2794.395760] xhci_hcd 0000:02:00.0: irq 16, io mem 0xd7800000 [ 2794.396141] xHCI xhci_add_endpoint called for root hub [ 2794.396144] xHCI xhci_check_bandwidth called for root hub [ 2794.396195] hub 9-0:1.0: USB hub found [ 2794.396203] hub 9-0:1.0: 1 port detected [ 2794.396305] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 2794.396371] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 10 [ 2794.396496] xHCI xhci_add_endpoint called for root hub [ 2794.396499] xHCI xhci_check_bandwidth called for root hub [ 2794.396547] hub 10-0:1.0: USB hub found [ 2794.396553] hub 10-0:1.0: 1 port detected [ 2798.004084] usb 1-3: new high-speed USB device number 8 using ehci_hcd [ 2798.140824] scsi21 : usb-storage 1-3:1.0 [ 2820.176116] usb 1-3: reset high-speed USB device number 8 using ehci_hcd [ 2824.000526] scsi 21:0:0:0: Direct-Access BUFFALO HD-PZU3 0001 PQ: 0 ANSI: 6 [ 2824.002263] sd 21:0:0:0: Attached scsi generic sg2 type 0 [ 2824.003617] sd 21:0:0:0: [sdb] 1953463728 512-byte logical blocks: (1.00 TB/931 GiB) [ 2824.005139] sd 21:0:0:0: [sdb] Write Protect is off [ 2824.005149] sd 21:0:0:0: [sdb] Mode Sense: 1f 00 00 08 [ 2824.009084] sd 21:0:0:0: [sdb] No Caching mode page present [ 2824.009094] sd 21:0:0:0: [sdb] Assuming drive cache: write through [ 2824.011944] sd 21:0:0:0: [sdb] No Caching mode page present [ 2824.011952] sd 21:0:0:0: [sdb] Assuming drive cache: write through [ 2824.049153] sdb: sdb1 [ 2824.051814] sd 21:0:0:0: [sdb] No Caching mode page present [ 2824.051821] sd 21:0:0:0: [sdb] Assuming drive cache: write through [ 2824.051825] sd 21:0:0:0: [sdb] Attached SCSI disk [ 2839.536624] usb 1-3: USB disconnect, device number 8 [ 2844.620178] usb 10-1: new SuperSpeed USB device number 2 using xhci_hcd [ 2844.640281] scsi22 : usb-storage 10-1:1.0 [ 2850.326545] scsi 22:0:0:0: Direct-Access BUFFALO HD-PZU3 0001 PQ: 0 ANSI: 6 [ 2850.327560] sd 22:0:0:0: Attached scsi generic sg2 type 0 [ 2850.329561] sd 22:0:0:0: [sdb] 1953463728 512-byte logical blocks: (1.00 TB/931 GiB) [ 2850.329889] sd 22:0:0:0: [sdb] Write Protect is off [ 2850.329897] sd 22:0:0:0: [sdb] Mode Sense: 1f 00 00 08 [ 2850.330223] sd 22:0:0:0: [sdb] No Caching mode page present [ 2850.330231] sd 22:0:0:0: [sdb] Assuming drive cache: write through [ 2850.331414] sd 22:0:0:0: [sdb] No Caching mode page present [ 2850.331423] sd 22:0:0:0: [sdb] Assuming drive cache: write through [ 2850.384116] usb 10-1: USB disconnect, device number 2 [ 2850.392050] sd 22:0:0:0: [sdb] Unhandled error code [ 2850.392056] sd 22:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2850.392061] sd 22:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00 [ 2850.392074] end_request: I/O error, dev sdb, sector 0 [ 2850.392079] quiet_error: 70 callbacks suppressed [ 2850.392082] Buffer I/O error on device sdb, logical block 0 [ 2850.392194] ldm_validate_partition_table(): Disk read failed. [ 2850.392271] Dev sdb: unable to read RDB block 0 [ 2850.392377] sdb: unable to read partition table [ 2850.392581] sd 22:0:0:0: [sdb] READ CAPACITY failed [ 2850.392584] sd 22:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2850.392588] sd 22:0:0:0: [sdb] Sense not available. [ 2850.392613] sd 22:0:0:0: [sdb] Asking for cache data failed [ 2850.392617] sd 22:0:0:0: [sdb] Assuming drive cache: write through [ 2850.392621] sd 22:0:0:0: [sdb] Attached SCSI disk [ 2850.732182] usb 10-1: new SuperSpeed USB device number 3 using xhci_hcd [ 2850.752228] scsi23 : usb-storage 10-1:1.0 [ 2851.752709] scsi 23:0:0:0: Direct-Access BUFFALO HD-PZU3 0001 PQ: 0 ANSI: 6 [ 2851.754481] sd 23:0:0:0: Attached scsi generic sg2 type 0 [ 2851.756576] sd 23:0:0:0: [sdb] 1953463728 512-byte logical blocks: (1.00 TB/931 GiB) [ 2851.758426] sd 23:0:0:0: [sdb] Write Protect is off [ 2851.758436] sd 23:0:0:0: [sdb] Mode Sense: 1f 00 00 08 [ 2851.758779] sd 23:0:0:0: [sdb] No Caching mode page present [ 2851.758787] sd 23:0:0:0: [sdb] Assuming drive cache: write through [ 2851.759968] sd 23:0:0:0: [sdb] No Caching mode page present [ 2851.759977] sd 23:0:0:0: [sdb] Assuming drive cache: write through [ 2851.817710] sdb: sdb1 [ 2851.820562] sd 23:0:0:0: [sdb] No Caching mode page present [ 2851.820568] sd 23:0:0:0: [sdb] Assuming drive cache: write through [ 2851.820572] sd 23:0:0:0: [sdb] Attached SCSI disk [ 2852.060352] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.076533] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.076538] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.196329] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.212593] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.212599] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.456290] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.472402] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.472408] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.624304] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.640531] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.640536] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.772296] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.788536] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.788541] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2852.920349] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2852.936536] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2852.936540] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2853.072287] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2853.088565] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2853.088570] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.176339] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.192561] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.192567] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.320349] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.336526] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.336531] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.468344] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.484551] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.484556] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.612349] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.628540] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.628545] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.756350] usb 10-1: reset SuperSpeed USB device number 3 using xhci_hcd [ 2884.772528] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b19060 [ 2884.772533] xhci_hcd 0000:02:00.0: xHCI xhci_drop_endpoint called with disabled ep f6b1908c [ 2884.848116] usb 10-1: USB disconnect, device number 3 [ 2884.851493] scsi 23:0:0:0: [sdb] killing request [ 2884.851501] scsi 23:0:0:0: [sdb] killing request [ 2884.851699] scsi 23:0:0:0: [sdb] Unhandled error code [ 2884.851702] scsi 23:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2884.851708] scsi 23:0:0:0: [sdb] CDB: Read(10): 28 00 00 5f 2b ee 00 00 3e 00 [ 2884.851721] end_request: I/O error, dev sdb, sector 6237166 [ 2884.851726] Buffer I/O error on device sdb1, logical block 6237102 [ 2884.851730] Buffer I/O error on device sdb1, logical block 6237103 [ 2884.851738] Buffer I/O error on device sdb1, logical block 6237104 [ 2884.851741] Buffer I/O error on device sdb1, logical block 6237105 [ 2884.851744] Buffer I/O error on device sdb1, logical block 6237106 [ 2884.851747] Buffer I/O error on device sdb1, logical block 6237107 [ 2884.851750] Buffer I/O error on device sdb1, logical block 6237108 [ 2884.851753] Buffer I/O error on device sdb1, logical block 6237109 [ 2884.851757] Buffer I/O error on device sdb1, logical block 6237110 [ 2884.851807] scsi 23:0:0:0: [sdb] Unhandled error code [ 2884.851810] scsi 23:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 2884.851813] scsi 23:0:0:0: [sdb] CDB: Read(10): 28 00 00 5f 2c 2c 00 00 3e 00 [ 2884.851824] end_request: I/O error, dev sdb, sector 6237228 [ 2885.168190] usb 10-1: new SuperSpeed USB device number 4 using xhci_hcd [ 2885.188268] scsi24 : usb-storage 10-1:1.0 Please help me with my problem. I got this after running dmesg.

  Read the article

• What You Need to Know About Windows 8.1

  - by Chris Hoffman

  Windows 8.1 is available to everyone starting today, October 19. The latest version of Windows improves on Windows 8 in every way. It’s a big upgrade, whether you use the desktop or new touch-optimized interface. The latest version of Windows has been dubbed “an apology” by some — it’s definitely more at home on a desktop PC than Windows 8 was. However, it also offers a more fleshed out and mature tablet experience. How to Get Windows 8.1 For Windows 8 users, Windows 8.1 is completely free. It will be available as a download from the Windows Store — that’s the “Store” app in the Modern, tiled interface. Assuming upgrading to the final version will be just like upgrading to the preview version, you’ll likely see a “Get Windows 8.1″ pop-up that will take you to the Windows Store and guide you through the download process. You’ll also be able to download ISO images of Windows 8.1, so can perform a clean install to upgrade. On any new computer, you can just install Windows 8.1 without going through Windows 8. New computers will start to ship with Windows 8.1 and boxed copies of Windows 8 will be replaced by boxed copies of Windows 8.1. If you’re using Windows 7 or a previous version of Windows, the update won’t be free. Getting Windows 8.1 will cost you the same amount as a full copy of Windows 8 — $120 for the standard version. If you’re an average Windows 7 user, you’re likely better off waiting until you buy a new PC with Windows 8.1 included rather than spend this amount of money to upgrade. Improvements for Desktop Users Some have dubbed Windows 8.1 “an apology” from Microsoft, although you certainly won’t see Microsoft referring to it this way. Either way, Steven Sinofsky, who presided over Windows 8′s development, left the company shortly after Windows 8 was released. Coincidentally, Windows 8.1 contains many features that Steven Sinofsky and Microsoft refused to implement. Windows 8.1 offers the following big improvements for desktop users: Boot to Desktop: You can now log in directly to the desktop, skipping the tiled interface entirely. Disable Top-Left and Top-Right Hot Corners: The app switcher and charms bar won’t appear when you move your mouse to the top-left or top-right corners of the screen if you enable this option. No more intrusions into the desktop. The Start Button Returns: Windows 8.1 brings back an always-present Start button on the desktop taskbar, dramatically improving discoverability for new Windows 8 users and providing a bigger mouse target for remote desktops and virtual machines. Crucially, the Start menu isn’t back — clicking this button will open the full-screen Modern interface. Start menu replacements will continue to function on Windows 8.1, offering more traditional Start menus. Show All Apps By Default: Luckily, you can hide the Start screen and its tiles almost entirely. Windows 8.1 can be configured to show a full-screen list of all your installed apps when you click the Start button, with desktop apps prioritized. The only real difference is that the Start menu is now a full-screen interface. Shut Down or Restart From Start Button: You can now right-click the Start button to access Shut down, Restart, and other power options in just as many clicks as you could on Windows 7. Shared Start Screen and Desktop Backgrounds; Windows 8 limited you to just a few Steven Sinofsky-approved background images for your Start screen, but Windows 8.1 allows you to use your desktop background on the Start screen. This can make the transition between the Start screen and desktop much less jarring. The tiles or shortcuts appear to be floating above the desktop rather than off in their own separate universe. Unified Search: Unified search is back, so you can start typing and search your programs, settings, and files all at once — no more awkwardly clicking between different categories when trying to open a Control Panel screen or search for a file. These all add up to a big improvement when using Windows 8.1 on the desktop. Microsoft is being much more flexible — the Start menu is full screen, but Microsoft has relented on so many other things and you’d never have to see a tile if you didn’t want to. For more information, read our guide to optimizing Windows 8.1 for a desktop PC. These are just the improvements specifically for desktop users. Windows 8.1 includes other useful features for everyone, such as deep SkyDrive integration that allows you to store your files in the cloud without installing any additional sync programs. Improvements for Touch Users If you have a Windows 8 or Windows RT tablet or another touch-based device you use the interface formerly known as Metro on, you’ll see many other noticeable improvements. Windows 8′s new interface was half-baked when it launched, but it’s now much more capable and mature. App Updates: Windows 8′s included apps were extremely limited in many cases. For example, Internet Explorer 10 could only display ten tabs at a time and the Mail app was a barren experience devoid of features. In Windows 8.1, some apps — like Xbox Music — have been redesigned from scratch, Internet Explorer allows you to display a tab bar on-screen all the time, while apps like Mail have accumulated quite a few useful features. The Windows Store app has been entirely redesigned and is less awkward to browse. Snap Improvements: Windows 8′s Snap feature was a toy, allowing you to snap one app to a small sidebar at one side of your screen while another app consumed most of your screen. Windows 8.1 allows you to snap two apps side-by-side, seeing each app’s full interface at once. On larger displays, you can even snap three or four apps at once. Windows 8′s ability to use multiple apps at once on a tablet is compelling and unmatched by iPads and Android tablets. You can also snap two of the same apps side-by-side — to view two web pages at once, for example. More Comprehensive PC Settings: Windows 8.1 offers a more comprehensive PC settings app, allowing you to change most system settings in a touch-optimized interface. You shouldn’t have to use the desktop Control Panel on a tablet anymore — or at least not as often. Touch-Optimized File Browsing: Microsoft’s SkyDrive app allows you to browse files on your local PC, finally offering a built-in, touch-optimized way to manage files without using the desktop. Help & Tips: Windows 8.1 includes a Help+Tips app that will help guide new users through its new interface, something Microsoft stubbornly refused to add during development. There’s still no “Modern” version of Microsoft Office apps (aside from OneNote), so you’ll still have to head to use desktop Office apps on tablets. It’s not perfect, but the Modern interface doesn’t feel anywhere near as immature anymore. Read our in-depth look at the ways Microsoft’s Modern interface, formerly known as Metro, is improved in Windows 8.1 for more information. In summary, Windows 8.1 is what Windows 8 should have been. All of these improvements are on top of the many great desktop features, security improvements, and all-around battery life and performance optimizations that appeared in Windows 8. If you’re still using Windows 7 and are happy with it, there’s probably no reason to race out and buy a copy of Windows 8.1 at the rather high price of $120. But, if you’re using Windows 8, it’s a big upgrade no matter what you’re doing. If you buy a new PC and it comes with Windows 8.1, you’re getting a much more flexible and comfortable experience. If you’re holding off on buying a new computer because you don’t want Windows 8, give Windows 8.1 a try — yes, it’s different, but Microsoft has compromised on the desktop while making a lot of improvements to the new interface. You just might find that Windows 8.1 is now a worthwhile upgrade, even if you only want to use the desktop.     

  Read the article

• MVP Summit 2011 summary and thoughts: The &ldquo;I hope I don&rsquo;t cross a line and lose my MVP status&rdquo; post

  - by George Clingerman

  I've been wanting to write this post summarizing my thoughts about the MVP summit but have been dragging my feet since it's a very difficult one to write. However seeing Andy (http://forums.create.msdn.com/forums/t/77625.aspx) and Catalin (http://www.catalinzima.com/2011/03/mvp-summit-2011/) and Chris (http://geekswithblogs.net/cwilliams/archive/2011/03/07/144229.aspx) post about it has encouraged me to finally take the plunge. I'm going to have to write carefully though because I'm going to be dancing around a ton of NDA mine fields as well as having to walk the tight-rope of not sending the wrong message or having people read too much into what I'm saying. I want to note that most of what I'm about to say is just based on my observations, they're not thoughts that Microsoft has asked me to pass along and they're not things I heard Microsoft say. It's just me sharing what I think after going to the MVP summit. Let's start off with a short imaginary question and answer session.     Has the App Hub forums and XBLIG management been rather poor by Microsoft? Yes.     Do I think we're going to see changes to that overnight? No.     Will it continue to look bad from the outside? Somewhat. Confusing right? Well that's kind of how things are right now. Lots of confusion. XNA is doing AWESOME. Like, really, really awesome. As a result of that awesomeness, XNA is on three major platforms: Xbox 360, WP7 and PC. This means that internally Microsoft is really excited and invested in the technology. That's fantastic for XNA and really should show you the future the framework has. It's here to stay. So why are Xbox LIVE Indie Game developers feeling so much pain? The ironic thing is that pain is being caused by the success of XNA. When XNA was just a small thing, there was more freedom and more focus. It was just us and them. We were an only child. Now our family has grown and everyone has and wants some time with XNA. This gets XNA pulled in all directions and as it moves onto new platforms, it plays catch up trying to get those platforms up to speed to where Xbox LIVE Indie Games has grown. Forums, documentation, educational content. They all need to be there because Xbox LIVE Indie Games has all of that and more. Along with the catch up in features/documentation/awesomeness there's the catch up that the people on the team have to play. New platforms and new areas of development mean new players and those new guys don't have the history of being around from the beginning. This leads to a lack of understanding at times just how important some things are because they seem so small and insignificant (Rich Text defaulting for new forum profiles would be one things that jumps to mind). If you're not aware that the forums have become more than just a basic Q&A, if you're not aware that they're a central hub to a very active community, then you don't understand why that small change should be prioritized over something else. New people have to get caught up and figure out how to make a framework and central forum site work for everyone it's now serving. So yeah, a lot of our pain this last year has been simply that XNA is doing well and XBLIG is doing well so the focus was shifted to catch other things up. It hurts when a parent seems to not have any time for you and they're spending some much time with your new baby brother. Growing pains. All families and in our case our product family experience it to some degree. I think as WP7 matures we'll see the team figuring out how to give everyone the right amount of attention. While we're talking about some of our growing pains, it is also important to note (although not really an excuse) that the Xbox LIVE Arcade developers complain about many of the same things that we do. If you paid attention to talks and information coming out of GDC 2011, most of the the XBLA guys were saying things that sounded eerily similar to what the XBLIG developers are saying (Scott Nichols from GayGamer.net noticed http://twitter.com/#!/NaviFairyGG/status/43540379206811650). Does this mean we should just accept the status quo since we're being treated exactly the same? No way. However it DOES show that the way we're being treated is no indication of the stability and future of the platform, it's just Microsoft dropping the communication ball on two playing fields. We're not alone and we're not even being treated worse. Not great, but also in a weird way a very good sign. Now on to a few tidbits I think I CAN share from the summit (I'm really crossing my fingers I'm not stepping over some NDA line I shouldn't be). First, I discovered that the XBLIG user base is bigger than I personally had originally estimated. I won't give the exact numbers (although we did beg Microsoft to release some of these numbers so maybe someday?) but it was much larger than my original guestimates and I was pleasantly surprised. Maybe some of you guys had the right number when you were guessing, but I know that mine was much too low. And even MORE importantly the number of users/shoppers is growing at a steady pace as well. Our market is growing! That was fantastic news and really something that I had to share. On to the community manager discussion. It was mentioned. I was mentioned. I blushed. Nothing more to report there than the blush in my cheeks was a light crimson color. If I ever see a job description posted for that position I have a resume waiting in the wings. I can't deny that I think that would be my dream job... ...so after I finished blushing, the MVPs did make it very, very clear that the communication has to improve. Community manager or not the single biggest pain point with the Xbox LIVE Indie Game community has been a lack of communication. I have seen dramatic improvement in the team responding to MVPs and I'm even seeing more communication from them on the forums so I'm hoping that's a long term change. I really think they understood the issue, the problem remains how to open that communication channel in a way that was sustainable. I think they'll get it figured out and hopefully that's sooner rather than later. During the summit, you may have seen me tweeting about how I was "that guy" (http://twitter.com/#!/clingermangw/status/42740432471470081). You also may have noticed that Andy and Catalin both mentioned me in their summit write ups. I may have come on a bit strong while I was there...went a little out of character for myself. I've been agitated for a while with the way things have been and I've been listening to you guys and hearing you guys be agitated. I'm also watching some really awesome indie game developers looking elsewhere and leaving the platform. Some of them we might not have been able to keep even with changes, but others are only leaving because of perceptions and lack of communication from Microsoft. And that pisses me off. And I let Microsoft know that I was pissed off. You made your list and I took that list and verbalized it. I verbalized the hell out of it. [It was actually mentioned that I'm a lot nicer on the forums and in email than I am in person...I felt bad about that, but I couldn't stay silent]. Hopefully it did something guys, I really did try hard to get the message across. Along with my agitation, I also brought some pride. I mentioned several things in person to the team that I was particularly proud of. From people in the community that are doing an awesome job, to the re-launch of XboxIndies that was going on that week and even gamers like Steven Hurdle (http://writingsofmassdeduction.com/) who have purchased one XBLIG every day for over 100 days now. The community is freaking rocking it and I made sure to highlight that. So in conclusion, I'd just like to say hang in there (you know, like that picture of the cat). If you've been worried about investing in Xbox LIVE Indie Games because you think it's on shaky ground. It's not. Dream Build Play being about the Xbox 360 should have helped a little to point that out. The team is really scrambling around trying to figure things out and make improvements all around. There’s quite a few new gals and guys and it's going to take them time to catch up and there are a lot of constantly shifting priorities. We all have one toy, one team and we're fighting for time with it. It's also time for the community to continue spreading our wings and going out on our own more often. The Indie Game Winter Uprising was a fantastic example of that. We took things into our own hands and it got noticed and Microsoft got behind it. They do every time we stand up and do something (look at how many Microsoft employees tweeted, wrote about the re-launch of XboxIndies.com or the support I've gotten from them for my weekly XNA Notes). XNA is here to stay, it's time for us to stop being scared of that and figure out how to make our own games the successes they should be. There's definitely a list of things that need to be fixed, things that should be improved and I think we should definitely keep vocal about that with Microsoft. Keep it short, focused and prioritized. There's also a lot of things we can do ourselves while we're waiting on them to fix and change things. Lots of ways we can compensate for particular weaknesses in the channel. The kind of stuff that we can step up and do ourselves. Do it on our own, you know, the way Indies always do. And I'm really looking forward to watching us do just that.

  Read the article

• Fitting it together, database, reporting, applications in C#

  - by alvonellos

  Introduction Preamble I was hesitant to post this, since it's an application whose intricate details are defined elsewhere, and answers may not be helpful to others. Within the past few weeks (I was actually going to write a blog post about this after I finished) I've discovered that the barrier I'm encountering is one that's actually quite common for newer developers. This question is not so much about a specific thing as it is about piecing those things together. I've searched the internet far and wide, and found many tutorials on how to create applications that are kind of similar to what I'm looking for. I've also looked at hiring another, more experienced, developer to help me along, but all I've gotten are unqualified candidates that don't have the experience necessary and won't take care of the client or project like I will. I'd rather have the project never transpire than to release a solution that is half-baked. I've asked professors at my school, but they've not turned up answers to my question. I'm an experienced developer, and I've written many applications that are -- very abstractly -- close to what I'm doing, but my experiences from those applications aren't giving me enough leverage to solve this particular problem. I just hope that posting this article isn't a mistake for me to write. Project Description I have a project I'm working on for a client that is a rewrite of an application, originally written in Foxpro 2.6 by someone before me, that performs some analysis (which, sadly, I'm not allowed to disclose as per of my employment contract) on financial data. One day, after a long talk between the client and I -- where he intimately described his frustrations with all the bugs I've been hacking out of this code for 6 months now -- he told me to just rewrite it and gave me a month to write a good 1/8 of this 65k LOC Foxpro monstrosity. this 65k line of code foxpro monstrosity. It'll take me a good 3 - 6 months to rewrite this software (I know things the original programmer did not, like inheritance) going as I am right now, but I'm quickly discovering that I'm going to need to use databases. Prior to this contract I didn't even know about foxpro, and so I've had to learn foxpro on the fly, write procedures and make modifications to the database. I've actually come to like it, and this project would be rewritten in Foxpro if it were still a supported language, because over the past few months, I've come to like the features of Foxpro that make it so easy to develop data-driven applications. I once perfomed an experiment, comparing C# to Foxpro. What took me 45 minutes in C# took me two in Foxpro, and I knew C# prior to Foxpro. I was hoping to leverage the power of C#, but it intimidates me that in foxpro, you can have one line of code and be using a database. Prior to this, I have never written any serious database development from scratch. All the applications that I've written are in a different league. They are either completely data-naive or data-naive enough that I can get away with not using a database through serialization or by designing algorithms that work with the data in a manner that is stateless, so there is no need to worry about databases. I've come to realize, very quickly, that serialization and my efficacy with data structures has been my crutch all these years that's prevented me from adventuring into databases, and has consequently hindered my success in real-world programming. Sure, I've written some database stuff in Perl and Python, and I've done forms and worked with relational databases and tables, I'm a wizard in Access and Excel (seriously) and can do just about anything, but it just feels unnatural writing SQL code in another language... I don't mind writing SQL, and I don't It's that bridge between the database and the program code that drives me absolutely bonkers. I hope I'm not the only one to think this, but it bothers me that I have to create statements like the following string sSql = "SELECT * from tablename" When there's really no reason for that kind of unchecked language binding between two languages and two API's. Don't get my wrong, SQL is great, but I don't like the idea that, when executing commands on a SQL database, that one must intermix database and application software, and there's no database independence, which means that different versions of different databases can break code. This isn't very nice. The nicest thing about Foxpro is the cohesiveness between programming language and database. It's so easy, and Foxpro makes it easy, because the tool just fits the task. I can see why so many developers have created a career with this language, because it lowered the barrier of entry to data-driven applications that so many businesses need. It was wonderful. For my purposes today, with the demands and need for community support, extensibility, and language features, Foxpro isn't a solution that I feel would be the right tool for the job. I'm also worried about working too heavy with the database, because I've seen data-driven .NET applications have issues with database caches, running out of memory, and objects in the database not being collected. (Memory leaks) And OH the queries. Which one, how, and why? There are a plethora of different ways that a database can be setup, I think I counted 5 or 6 different kinds of database applications alone that I can chose from. That is a great mountain for me to climb when I don't even know where to begin when it comes to writing data-driven applications. The problem isn't that I don't know SQL or that I don't know C#. I know both and have worked with both extensively. It's making them work together that's the problem, and it's something I've never done in C# before. Reports The client likes paper. The data needs to be printed out in a format that is extensible, layered, and easy to use. I have never done reporting before, and so this is a bit of a problem. From the data source comes crystal reports, and so there's a dependency on the database, from what I understand. Code reuse A large part of the design decision that I've gone through so far is to break the task of writing a piece of this software into routines and modular DLL's and so forth such that much of the code can be reused. For example, when I setup this database, I want to be able to reuse the same database code over and over again. I also want to make sure that when the day comes that another developer is here, that he/she will be able to pick up just where I left off. The quicker I develop these applications, the better off I am. Tasks & Goals In my project, I need to write routines that apply algorithms and look for predefined patterns in financial data. Additionally, I need to simulate trading based on predefined algorithms and data. Then I need to prepare reports on that data. Additionally, I need to have a way to change the code base for this application quickly and effectively, without hacking together some band-aid solution for a problem that really needs a trauma ward. Special Considerations The solution must be fast, run quickly on existing hardware, and not be too much of a pain to maintain and write. I understand that anything I write I'm married to -- I'm responsible for the things that I write because my reputation and livelihood is dependent on it. Do I really need a database? What about performance? Performance was such a big issue that I hand wrote a data structure that is capable of performing 2 billion operations, using a total of 4 gigs of memory in under 1/4 of a second using the standard core two duo processor. I could not find a similar, pre-written data structure in C# to perform this task. What setup do I use in terms of database? What about reporting? I'd prefer to have PDF's generated, but I'd like to be able to visually sketch those reports and then just have a ReportFactory of some sort, that when I pass some variables in, it just does that data. About Me I'm a lone developer for a small business in this area. This is the first time I've done this and I've never had the breadth and depth of my knowledge tested. I'm incredibly frustrated with this project because I feel incredibly overwhelmed with the task at hand. I'm looking for that entry level point where I can draw a line and say "this is what I need to do" Conclusion I may have not been clear enough on my post. I'm still new to this whole thing, and I've been doing my best to contribute back to the community that I've leached so much knowledge from. I'd be glad to edit my post and add more information if possible. I'm looking for a big-picture solution or design process that helps me get off the ground in this world of data-driven applications, because I have a feeling that it's going to be concentric to my entire career as a programmer for some time. Specifically, if you didn't get it from the rest of the post (I may not have been clear enough) I really need some guidance as to where to go in terms of the design decisions for this project. Some things that'll be useful will be a pro/con list for the different kinds of database projects available in VS2010. I've tried, but generating that list has been as hard as solving the problem itself... If you could walk a developer writing a data-driven application for the first time in C#, how would you do that? Where would you point them to?

  Read the article

• How Mary Meeker’s Latest Findings May Make You Re-Imagine Commerce

  - by Brenna Johnson-Oracle

  0 0 1 954 5439 Endeca Technologies 45 12 6381 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Today, Mary Meeker released her highly anticipated annual “Internet Trends” presentation for 2014. All 164 slides are jam-packed with pretty much everything you need to know about the state of the Internet. And as luck would have it, Oracle is staying ahead of these trends (but we’ll talk about that later). There were a few surprises, some stats to solidify what you likely already know, and Meeker’s novel observations about where we are all going. What interested me the most is not only how people are engaging in their personal lives, but how they engage with brands. As you could probably predict, Internet usage growth is slowing while tablet user and mobile data traffic growth continue their meteoric rise around the globe, with tremendous growth in underpenetrated markets like China, India, Brazil and Indonesia. Now hold those the “Internet is dead” comments. Keep in mind there’s still plenty of room to grow, and a multiscreen model is Meeker’s vision for our future. Despite 1.5x YOY growth for mobile traffic, mobile still only makes up about 23% of all traffic today. With tablet shipments easily outpacing figures for PCs even at their height (in 2007), mobile will only continue on it’s path, but won’t be everything to everyone. Mobile won’t replace every touchpoint, it’s just created our shorter attention spans and demand for simpler, more personal experiences. As Meeker points out TVs, tablets, PCs, and smartphones are used for different activities at present, but lines will blur (for example, 84% of smartphones owners use their device while watching TV). Day-to-day activities are being re-imagining through simple, beautiful user experiences. It seems like every day I discover a new way a brand/site/app made the most mundane or mounting task enjoyable and frictionless – and I’m not alone. Meeker points out the evolution of how we do everything from how we communicate, get information, use money, meet someone, get places, order a meal, and consume media is all done through new user interfaces that make day-to-day tasks simpler. This movement has caused just about everyone’s patience for a poor UX to take a nosedive. And it’s not just the digital user experience, technology is making a lot of people’s offline lives easier, and less expensive. Today 47% of online shopping utilizes free shipping— nearly half. And Meeker predicts same day local delivery will be the “next big thing” (and you can take a guess on who will own that). Content, Community and Commerce creates the “Internet Trifecta.” Meeker pointed out that when content, communities and commerce occur in a single experience it’s embraced by consumers, which translates to big dollars for brands. The magic happens when consumers can get inspired, research, and buy in a single experience. As the buying cycle has changed and touchpoints (Web, mobile, social, store) are no longer tied to “roles” or steps in the customer journey, brands must make all experiences (content and commerce) available in a single, adaptable experience. (We at Oracle Commerce have a lot to say on this topic – stay tuned!) And in what Meeker calls the “biggest re-imagination of all:” consumers enabled with smartphones and sensors are creating troves of findable and sharable data, which she says is in the early stages, by growing rapidly. She notes that transparency and patterns of consumers with this hardware (FYI - there are up to 10 sensors embedded in smartphones now) has created a Big Data treasure chest to be mined to improve business and the life of the consumer. The opportunities are endless. So what does it all mean for a company doing business online? Start thinking about how you can: Re-imagine your experience. Not your online experience and your mobile experience and your social experience – your overall experience. When consumers can research, buy, and advocate from anywhere (and their attention spans are at an all-time low) channels don’t exist. Enable simple and beautiful interactions informed by all of the online and offline data you leverage across your enterprise. Ethically leverage the endless supply of data (user generated content, clicks, purchases, in-store behavior, social activity) to make experiences more beautiful, more accurate, and more personalized (not to mention, more lucrative for you). Re-imagine content and commerce. Content and commerce must co-exist in a single destination where shoppers can get inspired, explore, research, share, and purchase in a collective experience. Think of how you can deliver an experience where all types of experiences (brand stories and commerce) adapt to every customer need. (Look for more on this topic coming soon). Re-imagine your reach. Look to Meeker’s findings to see how the global appetite for digital experiences is growing, but under-served in many places (i.e.: India, Mexico, Indonesia, Brazil, Philippines, etc.). Growing your online business to a new geography doesn’t have to mean starting from scratch or having an entirely new team manage the new endeavor. Expand using what you’ve already built in a multisite framework, with global language support. And of course, make sure it’s optimized for mobile! Re-imagine the possible. After every Meeker report, I’m always left with the thought “we are just at the beginning.” Everyday there is more data, more possibilities, more online consumers, and more opportunities to use new latest technology to get closer to your customers and be more successful. There’s a lot going on in our Product Development and Product Innovations groups to automate innovation for our customers, so that they can continue to stay ahead of these trends, without disrupting their business. Check out a recent interview with our Innovations Team on some of these new possibilities. Staying on track despite the seemingly endless possibilities out there is the hard part. Prioritizing where you will focus based on your unique brand promise, customer and goals is what you do best. To learn how Oracle Commerce can help your business achieve your goals check out oracle.com/commerce. Check out Meeker’s entire report here.

  Read the article

• Thursday Community Keynote: "By the Community, For the Community"

  - by Janice J. Heiss

  Sharat Chander, JavaOne Community Chairperson, began Thursday's Community Keynote. As part of the morning’s theme of "By the Community, For the Community," Chander noted that 60% of the material at the 2012 JavaOne conference was presented by Java Community members. "So next year, when the call for papers starts, put-in your submissions," he urged.From there, Gary Frost, Principal Member of Technical Staff, AMD, expanded upon Sunday's Strategy Keynote exploration of Project Sumatra, an OpenJDK project targeted at bringing Java to heterogeneous computing platforms (which combine the CPU and the parallel processor of the GPU into a single piece of silicon). Sumatra entails enhancing the JVM to make maximum use of these advanced platforms. Within this development space, AMD created the Aparapi API, which converts Java bytecode into OpenCL for execution on such GPU devices. The Aparapi API was open sourced in September 2011.Whether it was zooming-in on a Mandelbrot set, "the game of life," or a swarm of 10,000 Dukes in a space-bound gravitational dance, Frost's demos, using an Aparapi/OpenCL implementation, produced stunningly faster display results. He indicated that the Java 9 timeframe is where they see Project Sumatra coming to ultimate fruition, employing the Lamdas of Java 8.Returning to the theme of the keynote, Donald Smith, Director, Java Product Management, Oracle, explored a mind map graphic demonstrating the importance of Community in terms of fostering innovation. "It's the sharing and mixing of culture, the diversity, and the rapid prototyping," he said. Within this topic, Smith, brought up a panel of representatives from Cloudera, Eclipse, Eucalyptus, Perrone Robotics, and Twitter--ideal manifestations of community and innovation in the world of Java.Marten Mickos, CEO, Eucalyptus Systems, explored his company's open source cloud software platform, written in Java, and used by gaming companies, technology companies, media companies, and more. Chris Aniszczyk, Operations Engineering,Twitter, noted the importance of the JVM in terms of their multiple-language development environment. Mike Olson, CEO, Cloudera, described his company's Apache Hadoop-based software, support, and training. Mike Milinkovich, Executive Director, Eclipse Foundation, noted that they have about 270 tools projects at Eclipse, with 267 of them written in Java. Milinkovich added that Eclipse will even be going into space in 2013, as part of the control software on various experiments aboard the International Space Station. Lastly, Paul Perrone, CEO, Perrone Robotics, detailed his company's robotics and automation software platform built 100% on Java, including Java SE and Java ME--"on rat, to cat, to elephant-sized systems." Milinkovic noted that communities are by nature so good at innovation because of their very openness--"The more open you make your innovation process, the more ideas are challenged, and the more developers are focused on justifying their choices all the way through the process."From there, Georges Saab, VP Development Java SE OpenJDK, continued the topic of innovation and helping the Java Community to "Make the Future Java." Martijn Verburg, representing the London Java Community (winner of a Duke's Choice Award 2012 for their activity in OpenJDK and JCP), soon joined Saab onstage. Verburg detailed the LJC's "Adopt a JSR" program--"to get day-to-day developers more involved in the innovation that's happening around them."  From its London launching pad, the innovative program has spread to Brazil, Morocco, Latvia, India, and more.Other active participants in the program joined Verburg onstage--Ben Evans, London Java Community; James Gough, Stackthread; Bruno Souza, SOUJava; Richard Warburton, jClarity; and Cecelia Borg, Oracle--OpenJDK Onboarding. Together, the group explored the goals and tasks inherent in the Adopt a JSR program--from organizing hack days (testing prototype implementations), to managing mailing lists and forums, to triaging issues, to evangelism—all with the goal of fostering greater community/developer involvement, but equally importantly, building better open standards. “Come join us, and make your ecosystem better!" urged Verburg.Paul Perrone returned to profile the latest in his company's robotics work around Java--including the AARDBOTS family of smaller robotic vehicles, running the Perrone MAX platform on top of the Java JVM. Perrone took his "Rumbles" four-wheeled robot out for a spin onstage--a roaming, ARM-based security-bot vehicle, complete with IR, ultrasonic, and "cliff" sensors (the latter, for the raised stage at JavaOne). As an ultimate window into the future of robotics, Perrone displayed a "head-set" controller--a sensor directed at the forehead to monitor brainwaves, for the someday-implementation of brain-to-robot control.Then, just when it seemed this might be the end of the day's futuristic offerings, a mystery voice from offstage pronounced "I've got some toys"--proving to be guest-visitor James Gosling, there to explore his cutting-edge work with Liquid Robotics. While most think of robots as something with wheels or arms or lasers, Gosling explained, the Liquid Robotics vehicle is an entirely new and innovative ocean-going 'bot. Looking like a floating surfboard, with an attached set of underwater wings, the autonomous devices roam the oceans using only the energy of ocean waves to propel them, and a single actuated rudder to steer. "We have to accomplish all guidance just by wiggling the rudder," Gosling said. The devices offer applications from self-installing weather buoy, to pollution monitoring station, to marine mammal monitoring device, to climate change data gathering, to even ocean life genomic sampling. The early versions of the vehicle used C code on very tiny industrial micro controllers, where they had to "count the bytes one at a time."  But the latest generation vehicles, which just hit the water a week or so ago, employ an ARM processor running Linux and the ARM version of JDK 7. Gosling explained that vehicle communication from remote locations is achieved via the Iridium satellite network. But because of the costs of this communication path, the data must be sent in very small bursts--using SBD short burst data. "It costs $1/kb, so that rules everything in the software design,” said Gosling. “If you were trying to stream a Netflix video over this, it would cost a million dollars a movie. …We don't have a 'big data' problem," he quipped. There are currently about 150 Liquid Robotics vehicles out traversing the oceans. Gosling demonstrated real time satellite tracking of several vehicles currently at sea, noting that Java is actually particularly good at AI applications--due to the language having garbage collection, which facilitates complex data structures. To close-out his time onstage, Gosling of course participated in the ceremonial Java tee-shirt toss out to the audience…In parting, Chander passed the JavaOne Community Chairperson baton to Stephen Chin, Java Technology Evangelist, Oracle. Onstage in full motorcycle gear, Chin noted that he'll soon be touring Europe by motorcycle, meeting Java Community Members and streaming live via UStream--the ultimate manifestation of community and technology!  He also reminded attendees of the upcoming JavaOne Latin America 2012, São Paulo, Brazil (December 4-6, 2012), and stated that the CFP (call for papers) at the conference has been extended for one more week. "Remember, December is summer in Brazil!" Chin said.

  Read the article

• CloudBerry Online Backup 1.5 for Windows Home Server

  - by The Geek

  Overview CloudBerry Online Backup version 1.5 is a front end application for Amazon S3 storage for backing up your Windows Home Server data. It makes backing up your essential data to Amazon S3 an easy process in the event the disaster strikes. Installation You install the Cloudberry Addin as you do for any addins for Windows Home Server. On a PC on your network, browse to the shared folders on your server and open the Add-Ins folder and copy over WHS_CloudBerryOnlineBackupSetup_v1.5.0.81S3o.msi (link below), then close out of the folder. Next launch the Windows Home Server Console, click Settings, then Add-Ins. Click on the Available tab and click the Install button. It installs very quickly, and when you get the Installation Succeeded dialog click OK. You will lose connection through the Console, just click OK, then reconnect. After reconnecting, you’ll see CloudBerry Backup has been installed, and you can begin using it. You can setup a backup plan right away or find out what’s new with version 1.5. Amazon S3 Account If you don’t already have an Amazon S3 account, you’ll be prompted to create a new one. Click on the Create an account hyperlink, which takes you to the Amazon S3 page where you can sign up. After reviewing the functionality of Amazon S3, click on the Sign Up for Amazon S3 button. Enter in your contact information and accept the Amazon Web Services Customer Agreement. You’re then shown their pricing for storage plans. The amount of storage space you use will depend on your needs. It’s relatively cheap for smaller amounts of data. Just keep in mind the more data you store and download, the more S3 is going to cost. Note: Amazon S3 is introducing Reduced Redundancy Storage which will lower the cost of the data stored on S3. CloudBerry 1.5 will support this new feature. You can find out more about this new pricing structure. Note: Keep in mind that after you first sign up for an Amazon S3 account, it can take up to 24 hours to be authorized. In fact, you may want to sign up for the S3 account before installing the Add-In. After you sign up for your S3 Account, you’ll be given access credentials which you can enter in and create a Storage Bucket name. Features & Use CloudBerry is wizard driven, straight-forward and easy to use. Here we take a look at creating a backup plan. To begin, click on the Setup Backup Plan button to kick off the wizard. Select your backup mode based on the amount of features you want. In our example we’re going to select Advanced Mode as it offers more features than Simple Mode. Select your backup storage account or create a new one. You can select a default account by checking Use currently selected account as default. Now you can go through and select the files and folders you want to backup from your home server. Check the box Show physical drives to get more of a selection of files and folders. This also allows you to backup files from your data drive as well. It has full support for drive extenders so you can backup your shares as well. The cool thing about Cloudberry is it allows you to drill down specific files and folders unlike other WHS backup utilities. Next you can use advanced filters to specify files and/or folders to skip if you want. There are compression and encryption options as well. This will save storage space, bandwidth, and keep your data secure. Purge Options allow you to customize options for getting rid of older files. You can also select the option to delete files from the S3 service that have been deleted locally. Be careful with this option however, as you won’t be able to restore files if you delete them locally. You have some nice scheduling options from running backups manually, specific date and time, or recurring daily, weekly or monthly. Receive email notifications in all cases or when a backup fails. This is a good option so you know if things were successful or something failed, and you need to back it up manually. Email notifications… Give your plan a name… Then if the summary page looks good you can continue, or still go back at this point if something doesn’t look correct and needs adjusting. That’s it! You’re ready to go, and you have an option to start your first backup right away. After you’ve created a backup plan, you can go in and edit, delete, view history, or restore files. Restoring Files using CloudBerry To restore data from your backups kick off the Restore Wizard and select the backup to restore from. You can select the last backup, a specific point in time, or manually browse through the files. Browse through the directory and select the files you need to restore. Choose the destination to restore the files to. You can select from the original location, a specific location, to overwrite existing files, or set the location as the default for future restores. If the files are encrypted, enter in the correct passwords. If the summary looks good, click on Next to start the restore process. You’ll be shown a progress bar at the bottom of the screen while the files are restored. After the process has completed, close out of the Restore Wizard. In this example we restored a couple of music files to the desktop of Windows Home Server… But as shown above you can save them to the original location, other network locations, or WHS shared folders. This can make it a lot easier to keep track of files you’ve restored. You can also access different options for CloudBerry by clicking Settings in WHS Console then CloudBerry Backup. Here you can set up a new storage account, check for updates, app options, Diagnostics, and send feedback. Under Options there are several settings you can tweak to get the best experience for your WHS backups. CloudBerry Web Interface Another nice feature is the CloudBerry Web Interface so you can access your data from anywhere you have an Internet connection. To check it out in WHS Console, click on the Backup Web Interface link…you’ll probably want to bookmark the link in your favorite browser. Note: This feature is still in beta and at the time of this review, the Web Interface wasn’t up and running so we weren’t able to test it out. Performance The Cloudberry app works very well through the Windows Home Server Console. The amount of time it takes to backup or restore your data will depend on the speed of your Internet connection and size of the files. In our tests, backing up 1GB of data to the Amazon S3 account took around an hour, but we were running it on a DSL with limited upload speeds so your mileage will vary. Product Support In our experience, the team at CloudBerry offered great support in a timely manner when contacting them. You can fill out a help request through a form on their website and they also have a community forum. Conclusion We were very pleased with CloudBerry Online Backup for WHS. It’s wizard driven interface makes it extremely easy to use, and offers comprehensive backup choices for your Amazon S3 account. CloudBerry will only backup files that have been modified, so if files haven’t been changed, they won’t be backed up again.They offer a free 15 day trial and is $29.99 after that for a full license. Once you buy the app you own it, and charges to your S3 account will vary depending on the amount of data you upload. If you’re looking for an effective and easy to use front end application to backup your Windows Home Server data to your Amazon S3 account, CloudBerry is a recommended affordable choice. Download CloudBerry for Windows Home Server Sign Up For Amazon S3 Account Rating Installation: 9 Ease of Use: 8 Features: 8 Performance: 8 Product Support: 8 Similar Articles Productive Geek Tips Restore Files from Backups on Windows Home ServerGMedia Blog: Setting Up a Windows Home ServerBackup Windows Home Server Folders to an External Hard DriveBackup Your Windows Home Server Off-Site with Asus WebstorageRemove a Network Computer from Windows Home Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010 Daily Motivator (Firefox)

  Read the article

• Wireless will not connect

  - by azz0r

  Hello, I have installed Ubuntu 10.10 on the same machine as my windows setup. However, it will not connect to my wireless network. It can see its there, it can attempt to connect, yet it will never connect. It will keep bringing up the password prompt everyso often. I have tried turning my security to WEP, I ended up turning it back to WPA2. It is set to AES (noted a few threads on google about that). Can you assist? I would love to dive into Ubuntu, but without the internet its pointless. --- lshw -C network --- *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 00:1d:92:ea:cc:62 capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.020.00-NAPI duplex=half latency=0 link=no multicast=yes port=twisted pair resources: irq:29 ioport:e800(size=256) memory:feaff000-feafffff memory:f8ff0000-f8ffffff(prefetchable) memory:feac0000-feadffff(prefetchable) *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: 00:15:af:72:a4:38 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bgn --- iwconfig ---- lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Wuggawoo" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Tx-Power=9 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on --- cat /etc/network/interfaces ---- auto lo iface lo inet loopback logs deamon.log --- Jan 19 04:17:09 ubuntu wpa_supplicant[1289]: Authentication with 94:44:52:0d:22:0d timed out. Jan 19 04:17:09 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 04:17:09 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning Jan 19 04:17:11 ubuntu wpa_supplicant[1289]: WPS-AP-AVAILABLE Jan 19 04:17:11 ubuntu wpa_supplicant[1289]: Trying to associate with 94:44:52:0d:22:0d (SSID='Wuggawoo' freq=2437 MHz) Jan 19 04:17:11 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0/wireless): association took too long. Jan 19 04:17:12 ubuntu NetworkManager: <info> (wlan0): device state change: 5 -> 6 (reason 0) Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0/wireless): asking for new secrets Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... Jan 19 04:17:12 ubuntu NetworkManager: <info> (wlan0): device state change: 6 -> 4 (reason 0) Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... Jan 19 04:17:12 ubuntu NetworkManager: <info> (wlan0): device state change: 4 -> 5 (reason 0) Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0/wireless): connection 'Wuggawoo' has security, and secrets exist. No new secrets needed. Jan 19 04:17:12 ubuntu NetworkManager: <info> Config: added 'ssid' value 'Wuggawoo' Jan 19 04:17:12 ubuntu NetworkManager: <info> Config: added 'scan_ssid' value '1' Jan 19 04:17:12 ubuntu NetworkManager: <info> Config: added 'key_mgmt' value 'WPA-PSK' Jan 19 04:17:12 ubuntu NetworkManager: <info> Config: added 'psk' value '<omitted>' Jan 19 04:17:12 ubuntu NetworkManager: nm_setting_802_1x_get_pkcs11_engine_path: assertion `NM_IS_SETTING_802_1X (setting)' failed Jan 19 04:17:12 ubuntu NetworkManager: nm_setting_802_1x_get_pkcs11_module_path: assertion `NM_IS_SETTING_802_1X (setting)' failed Jan 19 04:17:12 ubuntu NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. Jan 19 04:17:12 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 04:17:12 ubuntu NetworkManager: <info> Config: set interface ap_scan to 1 Jan 19 04:17:12 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning Jan 19 04:17:13 ubuntu wpa_supplicant[1289]: WPS-AP-AVAILABLE Jan 19 04:17:13 ubuntu wpa_supplicant[1289]: Trying to associate with 94:44:52:0d:22:0d (SSID='Wuggawoo' freq=2437 MHz) Jan 19 04:17:13 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating Jan 19 04:17:23 ubuntu wpa_supplicant[1289]: Authentication with 94:44:52:0d:22:0d timed out. Jan 19 04:17:23 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 04:17:23 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning Jan 19 04:17:24 ubuntu AptDaemon: INFO: Initializing daemon Jan 19 04:17:25 ubuntu wpa_supplicant[1289]: WPS-AP-AVAILABLE Jan 19 04:17:25 ubuntu wpa_supplicant[1289]: Trying to associate with 94:44:52:0d:22:0d (SSID='Wuggawoo' freq=2437 MHz) Jan 19 04:17:25 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating Jan 19 04:17:27 ubuntu NetworkManager: <info> wlan0: link timed out. --- kern.log --- Jan 19 04:18:11 ubuntu kernel: [ 142.420024] wlan0: direct probe to AP 94:44:52:0d:22:0d timed out Jan 19 04:18:13 ubuntu kernel: [ 144.333847] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 1) Jan 19 04:18:13 ubuntu kernel: [ 144.539996] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 2) Jan 19 04:18:13 ubuntu kernel: [ 144.750027] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 3) Jan 19 04:18:14 ubuntu kernel: [ 144.940022] wlan0: direct probe to AP 94:44:52:0d:22:0d timed out Jan 19 04:18:25 ubuntu kernel: [ 155.832995] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 1) Jan 19 04:18:25 ubuntu kernel: [ 156.030046] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 2) Jan 19 04:18:25 ubuntu kernel: [ 156.230039] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 3) Jan 19 04:18:25 ubuntu kernel: [ 156.430039] wlan0: direct probe to AP 94:44:52:0d:22:0d timed out --- syslog --- Jan 19 04:18:46 ubuntu wpa_supplicant[1289]: Authentication with 94:44:52:0d:22:0d timed out. Jan 19 04:18:46 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 04:18:46 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning Jan 19 04:18:48 ubuntu wpa_supplicant[1289]: WPS-AP-AVAILABLE Jan 19 04:18:48 ubuntu wpa_supplicant[1289]: Trying to associate with 94:44:52:0d:22:0d (SSID='Wuggawoo' freq=2437 MHz) Jan 19 04:18:48 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating Jan 19 04:18:48 ubuntu kernel: [ 178.833905] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 1) Jan 19 04:18:48 ubuntu kernel: [ 179.030035] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 2) Jan 19 04:18:48 ubuntu kernel: [ 179.230020] wlan0: direct probe to AP 94:44:52:0d:22:0d (try 3) Jan 19 04:18:48 ubuntu kernel: [ 179.433634] wlan0: direct probe to AP 94:44:52:0d:22:0d timed out lspci and lsusb lspci -- 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a) 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 01:00.0 VGA compatible controller: nVidia Corporation G80 [GeForce 8800 GTS] (rev a2) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 03:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller -- lsusb -- Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Bus 004 Device 002: ID 045e:0730 Microsoft Corp. Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 13d3:3247 IMC Networks 802.11 n/g/b Wireless LAN Adapter Bus 002 Device 002: ID 0718:0628 Imation Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 046d:08c2 Logitech, Inc. QuickCam PTZ Bus 001 Device 002: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub With no security on my router I still can't connect, I get: Jan 19 15:58:01 ubuntu wpa_supplicant[1165]: Authentication with 94:44:52:0d:22:0d timed out. Jan 19 15:58:01 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 15:58:01 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: disconnected -> scanning Jan 19 15:58:02 ubuntu wpa_supplicant[1165]: WPS-AP-AVAILABLE Jan 19 15:58:02 ubuntu wpa_supplicant[1165]: Trying to associate with 94:44:52:0d:22:0d (SSID='Wuggawoo' freq=2437 MHz) Jan 19 15:58:02 ubuntu wpa_supplicant[1165]: Association request to the driver failed Jan 19 15:58:02 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: scanning -> associating Jan 19 15:58:05 ubuntu NetworkManager: <info> wlan0: link timed out. Jan 19 15:58:07 ubuntu wpa_supplicant[1165]: Authentication with 94:44:52:0d:22:0d timed out. Jan 19 15:58:07 ubuntu NetworkManager: <info> (wlan0): supplicant connection state: associating -> disconnected Jan 19 15:58:07 ubuntu NetworkManager: <info> (wlan0): supplicant connec

  Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >