Search Results

Search found 21455 results on 859 pages for 'setup exe'.

Page 188/859 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

• xrandr fails when 3rd monitor has higher resolution

  - by Pi3cH

  I tried many combinations with xrandr command under lubuntu 12.04 to setup my three monitors DVI (DELL 1) left detected as HDMI1 HDMI (LG E2290) middle detected as HDMI2 VGA (DELL 2) right detected as VGA1 I can get the display with fix 1280x1024 on all the monitors. But once I setup 1280x1024 + 1920x1080 + 1280x1024, I get blank screen on all the monitors. Sometimes it throws crts fail error instead of blanking out. Anyone have similar issues? any solutions/workarounds? P.S. I can setup two monitors using 1280x1280 and 1920x1080 P.S.S. HDMI2 required at least 1920x1080 to display sharp picture. Outputs (it seems graphic card supports up to 8192x8192): xrandr Screen 0: minimum 320 x 200, current 3840 x 1024, maximum 8192 x 8192 VGA1 connected 1280x1024+2560+0 (normal left inverted right x axis y axis) 338mm x 270mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 HDMI2 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 477mm x 268mm 1920x1080 60.0 + 1680x1050 60.0 1280x1024 75.0 60.0* 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) 3 CRTs (0,1 VGA, 0,1,2 for other HDMI) xrandr --verbose VGA1 connected 1280x1024+2560+0 (0x47) normal (normal left inverted right x axis y axis) 338mm x 270mm Identifier: 0x42 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 0 CRTCs: 0 1 ... HDMI1 connected 1280x1024+0+0 (0x47) normal (normal left inverted right x axis y axis) 376mm x 301mm Identifier: 0x43 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 1 CRTCs: 0 1 2 ... HDMI2 connected 1280x1024+1280+0 (0x47) normal (normal left inverted right x axis y axis) 477mm x 268mm Identifier: 0x44 Timestamp: 51324 Subpixel: unknown Gamma: 1.0:1.0:1.0 Brightness: 1.0 Clones: CRTC: 2 CRTCs: 0 1 2 Below command fails: xrandr --output VGA1 --auto --output HDMI2 --auto --left-of VGA1 --output HDMI1 --auto --left-of HDMI2 Below command passes: xrandr --output VGA1 --auto --output HDMI2 --mode 1280x1024 --rate 60.0 --left-of VGA1 --output HDMI1 --auto --left-of HDMI2 Graphic card VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09)

  Read the article

• Can't access site internally, but DNS works

  - by BloodyIron

  1) I have apache2 running a vhost for a website. 2) This apache2 instance is already successfuly setup for other websites on it to be accessible internally and externally. 3) I am using an internal bind9 server to resolve the new website's domain internally to the private IP. This bind9 server is not public facing, nor is it the master server on the internet. 4) The DNS internally resolves to the right IP. 5) Firefox reports "server not found". 6) I have copied the config almost identically to other configs that are known to work (adjusting for proper paths of course). In turn I have reloaded and restarted apache2 repeatedly. 7) I have an entry to forward .org .info .net alternative TLDs to .com in the vhost config for this domain, and my browser goes from .org to .com despite note #5. 8) /var/log/apache2/access.log shows when someone externally tries to access the site, but no activity is observed when someone tries to access internally. Changing the log level does not appear to improve the situation. 9) I am out of ideas, nothing appears to be wrong. Please help? To be explicit. Why is this new site unreachable internally? I would like to clarify on something, even though I have already outlined this. YES I know this system is in a private network. NO it is not going through a router. YES I am using an internal DNS server (bind9) to resolve, and YES it does resolve to the proper internal IP. YES other websites on the same server setup in the same way with internal resolution work right now and have done for a while. Everything for this domain is setup the same as the other working domains as far as I can tell. The other working domains are internally AND externally accessible. This domain I am working with is only currently externally accessible. When I go to it internally firefox tells me "Server not found".

  Read the article

• Installing isolated instance of MySQL on Windows using silent install with .msi

  - by Abram

  I'm trying to write an installer for an internal application we wrote. After it installs our application it then installs MySQL using the .msi installer in silent mode. I specify the install dir and data dir to that of a directory within my application's install directory, such as: msiexec /i @@MYSQL_INSTALLER_FILE@@ /qn INSTALLDIR="@@INSTALL_DIR@@\MySQL\" DATADIR="@@INSTALL_DIR@@\MySQL\" USERNAME="@@DB_USER@@" PASSWORD="@@DB_PASS@@" (the @@variable@@'s are replace by my installer routine using InstallJammer) Once installed, I use mysqld.exe to install a windows service with a custom service name and defaults file like so: mysqld.exe --install CustomMySQL --defaults-file="@@INSTALL_DIR@@\MySQL\my.ini" This works fine as long as there is not already another instance of MySQL installed. If there is it silently fails to install MySQL. Running the msi installer manually (double-click) shows an error that a previous version is already installed and just aborts. Is there a way to automate installing MySQL as an isolated instance, regardless of whether another version/instance is already installed?

  Read the article

• run a Windows executable in XP compatibility mode from the command line?

  - by Jakob

  is there a way i can set the compatibility mode of an .exe file through the command line on execution of said file?

  Read the article

• Is there an image viewer which *won't* show every file in the current folder?

  - by hawbsl

  Looking for a Windows image viewer which can be started from the command line but which allows me to specify/restrict which files I want it to page through. As parameters. The good 'ol Windows Picture Viewer would be fine except that it'll show/cycle through all the pictures in the current folder. In my case I want to say something like: someimgvwr.exe "cat.jpg" "cow.jpg" "cub.jpg" so that only those three files will be displayed and not "pig.jpg" which might also happen to be there in the same folder. Actually, if it allowed something like this: someimgvwr.exe "c*.jpg" that would be even more perfect. Do any of the many image viewers that are out there allow such a thing?

  Read the article

• Modifying Windows Shortcut .lnk file

  - by user13267

  here as it's locked over there; I hope it belongs in this forum; Is it possible to open .lnk (windows shortcut) in a hex editor, and change the absolut shortcut path into a relative one? Can we do this is windows? The edit command in cmd can open link files but it's difficult to read and edit. Is there any hex editor in windows that can open lnk file and allow me to edit it? Do I need to take it to linux or does Linux recognize .lnk as a shortcut too? I want to do this not only for running exe files, but also for pointing to folders (that is, shortcut to folders). A batch file which executes explorer.exe with the target folder as parameter can do this actually, but I want to know if there is any way to actually edit the data in the .lnk file itself

  Read the article

• Why is Chrome receiving data?

  - by Aero

  Chrome seems to be continually receiving data even though I'm not downloading anything. This is making a noticeable impact on my browsing speed. The first screenshot shows Chrome receiving data even though I'm not downloading anything (nor buffering a YouTube video etc.) Even after I completely close Google Chrome, the "chrome.exe" remains in the Resource Monitor list and the "Received bytes" column continually increases in the screenshot below. However, "chrome.exe" does not show up in the Processes tab of Task Manager. This only occurs sometimes, but I don't know why. I have tried running a malware/virus scans to ensure that there is nothing malicious behind this, but those scans have shown nothing. Any ideas on what's causing this?

  Read the article

• "Error 5: Access denied" when installing programs with UAC turned off

  - by Aero

  I'm having some trouble installing msysgit 1.7.3.1preview on Windows 7 Home Premium. I downloaded the setup file from the Google Code and then ran it. Upon running, I got the following error: I have tried downloading and running different older versions of msysgit with no luck. For the record, I have administrative privileges and there are no other user accounts on this Windows machine. Any help would be greatly appreciated. Thanks. UPDATE: I have managed to semi-fix this problem. I turned on User Account Control back to the default setting and and then ran the setup file as an administrator. I successfully managed to install Git. However, this means I have to keep UAC turned on whenever I want to install a new program (I realised that it persists over all programs; not just Git). So it's quite a nuisance. If anybody knows how I could keep UAC disabled whilst still being able to install programs without running their setup files as an administrator, I would be eternally grateful. UPDATE: I have changed the question title to better suit the new situation.

  Read the article

• Apache Issues on Windows Server 2008

  - by dlackey

  I'm looking to reinstall Apache 2.2.25 since I continue to get these errors in the Windows Application log every 2-5 minutes: Faulting application name: httpd.exe, version: 2.2.25.0, time stamp: 0x51dd049c Faulting module name: zlib1.dll, version: 1.2.3.0, time stamp: 0x4790446a Exception code: 0xc0000005 Fault offset: 0x00002bad Faulting process id: 0x38e8 Faulting application start time: 0x01cfbfd70cdfbc4f Faulting application path: C:\Apache2\bin\httpd.exe Faulting module path: C:\Apache2\bin\zlib1.dll Report Id: 745f20de-2bca-11e4-bd5d-002590f28d7e If the new install doesn't work or if there are some "issues", can I simply restore the Apache2 directory from backup and then I'll just be back where I started? I thought about just renaming the current install to something like c:\apache2_old and if something fails, I can delete the new install and rename c:\apace2_old back to c:\apache. What do you all think?

  Read the article

• Lost Windows 7 boot after EasyBCD with EFI

  - by drent

  I've got a Lenovo Y580 with a 64GB SSD and a 1TB HDD setup using GPT and setup to boot from (U?)EFI. I was trying to get my Linux Mint installation on the Windows boot manager using EasyBCD (I didn't realise EFI but it wiped my boot partition/loader and I cannot seem to get Windows back (and I still can't get a bootable Linux Mint). Using the System Recovery utility, Startup Repair can't "see" windows (it might be because I'm using a 7 Pro disk to recover Home Premium?). In command prompt, Bootrec tools don't do anything and bootsect can't run because it says that it's for BIOS only and I've booted with EFI. I can see the EFI data on the 200mb SSD partition using diskpart but I don't know how to add Windows back onto whatever bootloader I have/need. At the moment the only options I can see are: Do a fresh install of Windows and hope that the setup remains as fast as the default one (the SSD is some kind of cache for Windows but I can't quite see how it works given that the rest of the SSD is unpartitioned space). This seems like overkill given that Windows was working fine til EasyBCD deleted it. Try forcing BIOS mode and see if that somehow magically fixes things Try converting from GPT to MBR to try and use the bootrec/bootsect tools (and maybe back again) which seems like a really bad idea. Anyone have any ideas?

  Read the article

• Website hosted on my virtualbox web server not displaying images or applying css when viewed through phone

  - by WebweaverD

  I would really appreciate it if someone could help me. Please let me know if you need more info in the comments. My Set Up I have a windows 7 pc. On it I run a virtual box VM with a ubuntu 12 guest os and LAMP setup. I share files between the two machines using samba from linux to windows and using windows file sharing (Workgroup) the other way round. The vm is set up with a bridged network adapter and can happily serve web pages to my host machine. I use DHCP reservations on my home wireless router/modem to reserve an ip for the vm and give it a sitename.dev in my windows host file so I can access it at sitename.dev through the browser. The Problem So far so good but I have a dev project which needs a lot of mobile template development, now obviously I can use a browser plugin to simulate a mobile device but I would like to be able to see the real thing easily on my phone during development. So ideally I would like a similar setup on my iphone to my windows setup Now I'm not great on networking and dont have much experience with web server set up. So when I typed the ip of my virtual box into my iphone i wasnt expecting to see anything. I was pleasantly surprised when my site loaded up. The javascript even seems to be running but the images and css are not happening. My Question 1) What is happening here, is it something to do with the bridged set up on the vm network? 2)How do I make the sites load properly through my phone Notes I've also tried another phone. The same sites viewed on live servers work fine.

  Read the article

• Why does IIS refuse to serve ASP.NET content?

  - by Michael Haren

  My Windows Server 2003 Std server refuses to server ASP.NET content. It serves regular html just fine but anything .net, even a one line html file with an ASPX extention fails silently. Things I've tried: Nothing in the event log or IIS WWW logs when it fails. Fiddler shows no response I reinstalled .NET with C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727aspnet_regiis.exe -U C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727aspnet_regiis.exe -I I give obscenely high permissions on everything I can think of (full control, read, write, etc.) to all possibly relevant users (IUSER*, ASP.NET, etc.). I confirmed that ASP.Net v1 and v2 Web Service Extensions are "allowed" in IIS Confirmed that the Server Manager had IIS and ASP.Net roles enabled Again: this is the scenario: http://localhost/Test/Default.htm <-- Works great! http://localhost/Test/Default.aspx <-- Bombs silently with no message at all Any guidance will be much appreciated! Solution: I reinstalled per the instructions below and it works now. Thanks all!

  Read the article

• How to pull SNMP information from Windows commandline without installing software

  - by mkanet

  I would like to be able to quickly pull SNMP information via commandline such as device uptime. I noticed Net-SNMP's snmpget.exe can do this; but it looks like I need to install Net-SNMP first before I can use that executable. Isn't there any way to make this executable portable? When I simply copy it to another machine and try to execute it, it complains that netsnmp.dll is missing. If I copy that file to the same folder, it still says the file is missing. I even tried to regsvr32 that dll, but I was unsuccessful. Maybe there's a better way to get simple SNMP information from the Windows command line using royalty free/non-commercial software? Edit: It looks like I may be able to answer my own question. http://www.snmpsoft.com/freetools/snmpget.html "SNMPGet.exe"

  Read the article

• How does the "Last Result" column of Scheduled Tasks in Windows Server 2003 get set from a process or script?

  - by leeand00

  The Last Result column of the Scheduled Tasks Window on Windows Server 2003, displays the result of the execution of the .exe, .vbs, .ps1, .bat, .cmd, etc... that has been run at the scheduled time. There is also an archived history of this value that appears in the Scheduled Tasks Log (Found on the Scheduled Tasks Window under the Advanced->View Log) Now my question is, if I'm running a scheduled task that is a .exe, .vbs, .ps1, .bat, .cmd, etc... how do I use that process to return a specific Last Result when the process ends? P.S. If you think this question should be split up into smaller parts since I'm painting pretty broadly with it, just let me know and I'll split it into subsequent smaller questions

  Read the article

• Windows Server 2008 R2 Standard to Enterprise Problems

  - by boburob

  A few months ago I setup a Citrix XenApp cluster running on Windows Server 2008 R2 Standard Edition using the temporary 180 day license key. Recently the company bought a Windows Server 2008 R2 Enterprise DataCenter license. This means I need to upgrade the Windows edition from Standard to Enterprise. I attach the disk to the VM and start the upgrade process through XenCenter, it runs through all checks and unpacks all Windows files and seems to create a Windows Setup partition, it then reboots and trys to boot into this partition and I get a blue screen telling me to CHKDSK the hard drive with the following error message: STOP: 0x0000007B As XenApp is already setup and working I really do not want to go down the route of rebuilding this server (as I already had to do this once down to issues with XenApp). The server did have 8GB of RAM assigned to it, I have tried reducing this down to 2GB's as I read this can cause an issue. Also I can boot back into the Windows Server 2008 R2 Standard partition without any problems. UPDATE I have managed to get round the urgency by re-arming the license, giving me another 180 day trial..but would be nice to work out why this is happening!

  Read the article

• RemoteApps and Cached Credentials

  - by user66774

  I'm looking for a guidance on an issue we're having. We are hosting an application over terminal services through RDWeb on Windows 2008 Server. To give users the ability to change their password we've exposed the iisadmpwd to allow the users to change their passwords. When the users change their password, they are prompted to log into broker server, even if they log off of the RDWeb page and log back in. What we've found is that the credentials seem to be cached in memory after logging in. Ending task on TSWBPRXY.EXE, WKSPRT.EXE, closing IE and logging back into the RDWEb page, then launching the application allows the user to log into the application without additional credentials. I'm wondering if there is a better way to either have the user change their password from a web interface, but allow them to reestablish their connection from the RDWeb login page rather than through the RDP login prompt that comes up.

  Read the article

• Is it possible to COMPLETELY replace the start menu?

  - by Subaru Tashiro

  I plan to make a replacement for the Windows 7 start menu, and I would like to know if that's even possible. I understand that the start menu is part of explorer.exe but I do not intend to replace explorer.exe. Is it possible to launch the replacement start menu by clicking the native start orb? Is it also possible to launch the replacement by pressing the Windows key or ctrl+esc ? Is the Windows key a macro for ctrl+esc ? or is it two different hotkeys that do the same thing? May I know if there is any software that do any one of these things?

  Read the article

• Is there any way to remotely configure a Microsoft Lync account?

  - by John O

  There are no perl modules for Lync. No open source clients. Windows Powershell can do some things with it, but only on the server on which the server software is installed. It would be useful to be able to forward a certain desk phone number (we use Lync for voip) to a personal cell phone. We can do this from our own desktop machines, but only using the Lync client. It would be nice to be able to have a cron script run that just did rotations, I wouldn't have to carry around the lousy on-call phone with me. communicator.exe doesn't take any useful parameters. Nor are there any obvious function names in the DLLs that would let me just use rundll32.exe to accomplish this. There is a Lync SDK, but no examples of changing phone forwarding, and my Windows 7 machine refuses to install the Silverlight SDK dependency for some reason I can't fathom. Does anyone have any other ideas how I might accomplish this?

  Read the article

• Desktop stops working in Windows 7

  - by Roger

  I'm having an odd problem on one of my Windows 7 machines. At machine startup, explorer.exe is working properly - I can use the Start menu, click on desktop icons, etc. At some later point, though, I lose the ability to interact with desktop icons. I can't double-click to open files on the desktop, and I can't right-click to see the properties window. Oddly enough the Start menu still works properly, and I can still open an Explorer window into my desktop and access everything. I can get around the problem by killing explorer.exe and restarting it using Task Manager, but it's annoying to have to do this over and over. Does anyone have any ideas? I took a look at startup files with msconfig and didn't see any obvious problems. Any suggestions would be appreciated.

  Read the article

• How to troubleshoot Application Popup issues 0XC0000142 and 0XC000009a

  - by DotDot

  I am running randomly into 1 of these popups when our application runs. The machines range from 8GB/8Core to 24GB/24Core and run Windows Server 2008 R2. The application is a bunch of perl scripts and exe's that are expected to utilitize the server well. The process tree can be quite deep (5-6 child levels) and quite broad (60-70 level 1 processes). We hit this issues every 1% run on random machines. The application stalls on popup, unless someone clicks the damn button. The event log reads as cmd.exe - "Failed to initialize app. Click OK to close app" How could I reliably repro these issues?

  Read the article

• When resizing Windows Explorer on Windows 8 it crashes?

  - by Tural Teyyuboglu

  I have following problem: When I try to change size of any explorer window from maximized to some size getting following screen It blinks 20-30 times, then crashes. Also it changes it's size every time into this square size. Here is event viewer result: The program Explorer.EXE version 6.2.9200.16384 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel. Process ID: 10f8 Start Time: 01cd9e3e189fe3d1 Termination Time: 0 Application Path: C:\Windows\Explorer.EXE Report Id: ea71d13a-0a32-11e2-be92-3859f90026b6 Faulting package full name: Faulting package-relative application ID: What can be issue? Is there any way to fix explorer crashes? Or only way is reinstalling windows?

  Read the article

• Setting up a global MySQL Cluster in the cloud

  - by GregB

  I'm giving the question an overhaul to more specifically identify where I need help. I use two tools to manage a bunch of cloud server: Puppet and Rundeck. Both of these can be configured to use a mysql backend. I'd like to setup an instance of each application in both the U.S., and the U.K., treating the U.K. servers as hot stand-bys in case of failure in the U.S. I want to use a MySql cluster so that the data is automatically replicated from the U.S. to the U.K. Because these are hot standbys, high performance is not a goal. Redundancy and data integrity are most important. My question revolves around the setup of the mysql cluster. I want to run three servers, each one running a data node, a sql node, and a management node. Is this a valid configuration for mysql server? If so, could someone point me in the right direction for creating such a setup? I've downloaded the offical tarball, and the official debian, and the documentation for them contradicts many of the online tutorials. I'm installing on Ubuntu 10.04.

  Read the article

• How to blacklist Terminal Services startup environment setting?

  - by JBurace

  I have a user in Active Directory who uses this setting in the Environment tab: Start the following program at logon: "C:\Program Files\PName\Folder\gui.exe" This runs okay on various computers (that are on the domain) including his own. But the user needs to RDP into a Windows Server which does not have this program (which is normal). When the user RDPs into the server and logs in with the AD account, an error occurs about C:\Program Files\PName\Folder\gui.exe missing and the user then gets stuck at a grey screen. The user needs to RDP into this server; how can one blacklist that Environment setting from activation on a specific machine on the domain?

  Read the article

• Let a program (called by other program) run as admin without prompt

  - by DarkGhostHunter

  As you may know, Steam doesn't like no-admin accounts for installing games or whatsoever. In my case, I have a user in my computer that usually install a lot of games and every time I have to put my password to successfully play them. Blame, /bin/SteamService.exe. I came up with a solution: using RunAs to make Steam run as the admin user. But that is a potential security risk. So instead of that, I'm asking if is possible to do the following: Hot to run SteamService.exe with high trust levels (or admin privileges) automatically when Steam calls it? That way he can play and install games in Steam leaving the rest of the system alone. I don't mind if the user has to click "yes or no", but without prompt its better because some games asks every time they're executed.

  Read the article

• Router as primary DNS server, Server as alternate? (or vice versa)

  - by Jakobud

  We have a very small business network, with a typical cable modem hooked into a DD-WRT router. We also run a basic CentOS server that does a variety of things, including acting as the primary DNS server for the office. The reason we need an internal DNS server is because we do a lot of internal web development and use the DNS server to add/remove various local network URLs for internal website testing (like www.testsite.com.local). It's very important for us to be able to add/remove URL aliases easily to the DNS. The problem with this setup is that if we ever need to restart the CentOS server or take it offline for upgrades or whatever, then internet access for all computers on the network is lost. That's because each computer relies on that DNS server to access the Internet I guess? The router is online all the time and very very rarely has to be restarted. It would be nice if we could setup my router to be the primary DNS server but still be running DNS on my server. So we could still add my local testing website URLs to the DNS server in CentOS, but be able to also take down the CentOS server without loosing Internet access on the network. How would this be setup? Would I simply need to add both router + server IP addresses to each computer's IP settings? Is the router primary DNS and server secondary DNS server? Or vice versa? Or can one of the two serve as a fallback for the other? What (if anything) needs to be configured on both the router and server in order for them to recognize that the other DNS server exists on the network? Does anyone have any newb-friendly resources for setting up something like this?

  Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >