Search Results

Search found 5306 results on 213 pages for 'trailing character'.

Page 189/213 | < Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >

  • C when to allocate and free memory - before function call, after function call...etc

    - by Keith P
    I am working with my first straight C project, and it has been a while since I worked on C++ for that matter. So the whole memory management is a bit fuzzy. I have a function that I created that will validate some input. In the simple sample below, it just ignores spaces: int validate_input(const char *input_line, char* out_value){ int ret_val = 0; /*false*/ int length = strlen(input_line); cout << "length = " << length << "\n"; out_value =(char*) malloc(sizeof(char) * length + 1); if (0 != length){ int number_found = 0; for (int x = 0; x < length; x++){ if (input_line[x] != ' '){ /*ignore space*/ /*get the character*/ out_value[number_found] = input_line[x]; number_found++; /*increment counter*/ } } out_value[number_found + 1] = '\0'; ret_val = 1; } return ret_val; } Instead of allocating memory inside the function for out_value, should I do it before I call the function and always expect the caller to allocate memory before passing into the function? As a rule of thumb, should any memory allocated inside of a function be always freed before the function returns?

    Read the article

  • Moving to an arbitrary position in a file in Python

    - by B Rivera
    Let's say that I routinely have to work with files with an unknown, but large, number of lines. Each line contains a set of integers (space, comma, semicolon, or some non-numeric character is the delimiter) in the closed interval [0, R], where R can be arbitrarily large. The number of integers on each line can be variable. Often times I get the same number of integers on each line, but occasionally I have lines with unequal sets of numbers. Suppose I want to go to Nth line in the file and retrieve the Kth number on that line (and assume that the inputs N and K are valid --- that is, I am not worried about bad inputs). How do I go about doing this efficiently in Python 3.1.2 for Windows? I do not want to traverse the file line by line. I tried using mmap, but while poking around here on SO, I learned that that's probably not the best solution on a 32-bit build because of the 4GB limit. And in truth, I couldn't really figure out how to simply move N lines away from my current position. If I can at least just "jump" to the Nth line then I can use .split() and grab the Kth integer that way. The nuance here is that I don't just need to grab one line from the file. I will need to grab several lines: they are not necessarily all near each other, the order in which I get them matters, and the order is not always based on some deterministic function. Any ideas? I hope this is enough information. Thanks!

    Read the article

  • Which is better Java programming practice: stacking enums and enum constructors, or subclassing?

    - by Arvanem
    Hi folks, Given a finite number of items which differ in kind, is it better to represent them with stacked enums and enum constructors, or to subclass them? Or is there a better approach altogether? To give you some context, in my small RPG program (which ironically is supposed to be simple), a character has different kinds of items in his or her inventory. Items differ based on their type and use and effect. For example, one item of inventory is a spell scroll called Gremlin that adjusts the Utility attribute. Another item might be a sword called Mort that is used in combat and inflicts damage. In my RPG code, I now have tried two ways of representing inventory items. One way was subclassing (for example, InventoryItem - Spell - AdjustingAttributes; InventoryItem - Weapon - Sword) and instantiating each subclass when needed, and assigning values such as names like Gremlin and Mort. The other way was by stacking enums and enum constructors. For example, I created enums for itemCategory and itemSpellTypes and itemWeaponTypes, and the InventoryItem enum was like this: public enum InventoryItem { GREMLIN(itemType.SPELL, itemSpellTypes.ATTRIBUTE, Attribute.UTILITY), MORT(itemType.WEAPON, itemWeaponTypes.SWORD, 30); InventoryItem(itemType typeOfItem, itemSpellTypes spellType, Attribute attAdjusted) { // snip, enum logic here } InventoryItem(itemType typeOfItem, itemWeaponTypes weaponType, int dmg) { // snip, enum logic here } // and so on, for all the permutations of items. } Is there a better Java programming practice than these two approaches? Or if these are the only ways, which of the two is better? Thanks in advance for your suggestions.

    Read the article

  • Extract history from Korn shell

    - by Luc
    I am not happy about the history file in binary format of the Korn shell. I like to "collect" some of my command lines, many of them actually, and for a long time. I'm talking about years. That doesn't seem easy in Korn because the history file is not plain text so I can't edit it, and a lot of junk is piling up in it. By "junk" I mean lines that I don'twant to keep, like 'cat' or 'man'. So I added these lines to my .profile: fc -ln 1 9999 ~/khistory.txt source ~/loghistory.sh ~/khistory.txt loghistory.sh contains a handful of sed and sort commands that gets rid of a lot of the junk. But apparently it is forbidden to run fc in the .profile file. I can't login whenever I do, the shell exits right away with signal 11. So I removed that 'fc -l' line from my .profile file and added it to the loghistory.sh script, but the shell still crashes. I also tried this line in my .profile: strings ~/.sh_history ~/khistory.txt source ~/loghistory.sh That doesn't crash, but the output is printed with an additional, random character in the beginning of many lines. I can run 'fc -l' on the command line, but that's no good. I need to automate that. But how? How can I extract my ksh history as plain text? TIA

    Read the article

  • Hibernate collection mapping challenge

    - by Geln Yang
    Hi, There is a table Item like, code,name 01,parent1 02,parent2 0101,child11 0102,child12 0201,child21 0202,child22 Create a java object and hbm xml to map the table.The Item.parent is a Item whose code is equal to the first two character of its code : class Item{ string code; string name; Item parent; List<Item> children; .... setter/getter.... } <hibernate-mapping> <class name="Item" table="Item"> <id name="code" length="4" type="string"> <generator class="assigned" /> </id> <property name="name" column="name" length="50" not-null="true" /> <!--====================================== --> <many-to-one name="parent" class="Item" not-found="ignore"></many-to-one> <bag name="children"></bag> <!--====================================== --> </class> </hibernate-mapping> How to definition the mapping relationship? Thanks!

    Read the article

  • jQuery('body').text() gives different answers in different browsers

    - by Charles Anderson
    My HTML looks like this: <html> <head> <title>Test</title> <script type="text/javascript" src="jQuery.js"></script> <script type="text/javascript"> function init() { var text = jQuery('body').text(); alert('length = ' + text.length); } </script> </head> <body onload="init()">0123456789</body> </html> When I load this in Firefox, the length is reported as 10. However, in Chrome it's 11 because it thinks there's a linefeed after the '9'. In IE it's also 11, but the last character is an escape. Meanwhile, Opera thinks there are 12 characters, with the last two being CR LF. If I change the body element to include a span: <body onload="init()"><span>0123456789</span></body> and the jQuery call to: var text = jQuery('body span').text(); then all the browsers agree that the length is 10. Clearly it's the body element that's causing the issue, but can anyone explain exactly why this is happening? I'm particularly surprised because the excellent jQuery is normally browser-independent.

    Read the article

  • Do all C compilers allow functions to return structures?

    - by Jordan S
    I am working on a program in C and using the SDCC compiler for a 8051 architecture device. I am trying to write a function called GetName that will read 8 characters from Flash Memory and return the character array in some form. I know that it is not possible to return an array in C so I am trying to do it using a struct like this: //********************FLASH.h file******************************* MyStruct GetName(int i); //Function prototype #define NAME_SIZE 8 typedef struct { char Name[NAME_SIZE]; } MyStruct; extern MyStruct GetName(int i); // *****************FLASH.c file*********************************** #include "FLASH.h" MyStruct GetName( int i) { MyStruct newNameStruct; //... // Fill the array by reading data from Flash //... return newNameStruct; } I don't have any references to this function yet but for some reason, I get a compiler error that says "Function cannot return aggregate." Does this mean that my compiler does not support functions that return structs? Or am I just doing something wrong?

    Read the article

  • Regex expression is too greedy

    - by alastairs
    I'm writing a regular expression to match data from the IMDb soundtracks data file. My regexes are mostly working, although they are in places slurping too much text into my named groups. Take the following regex for example: "^ Performed by '?(?<performer>.*)('? \(qv\))?$" The performer group includes the string ' (qv) as well as the performer's name. Unfortunately, because the records are not consistently formatted, some performers' names are surrounded by single quotation marks whilst others are not. This means they are optional as far as the regex is concerned. I've tried marking the last group as a greedy group using the ?> group specifier, but this appeared to have no effect on the results. I can improve the results by changing the performer group to match a small range of characters, but this reduces my chances of parsing the name out correctly. Furthermore, if I were to just exclude the apostrophe character, I would then be unable to parse, e.g., band names containing apostrophes, such as Elia's Lonely Friends Band who performed Run For Your Life featured in Resident Evil: Apocalypse.

    Read the article

  • How do I get a less than in a javascript for loop in XSL to work?

    - by Kyle
    I am using CDATA to escape the script but in IE8's debugger I still get this message: "Expected ')'" in the for loop conditions. I am assuming it still thinks that the ; in the &lt; generated by CDATA is ending the loop conditions. Original script in my XSL template: <script type="text/javascript" language="javascript"> <![CDATA[ function submitform(form){ var oErrorArray = new Array(); for (i=0;i<form.length;i++) eval("oErrorArray["+i+"]=oError"+i); var goForm = true; for(i=0;i<form.length;i++) { oErrorArray[i].innerHTML = ""; if(form[i].value="")){ oErrorArray[i].innerHTML = "Error - input field is blank"; goForm = false; } } if(goForm == true) form.submit(); } function resetform(form){ form.reset(); } ]]> </script> Code generated after transformation (from IE8 debugger): <script type="text/javascript" language="javascript"> function submitform(form){ var oErrorArray = new Array(); for (i=0;i&lt;form.length;i++) eval("oErrorArray["+i+"]=oError"+i); goForm = true; for(i=0;i&lt;form.length;i++) { oErrorArray[i].innerHTML = ""; if(form[i].value="")){ oErrorArray[i].innerHTML = "Error - input field is blank"; goForm = false; } } if(goForm == true) form.submit(); } function resetform(form){ form.reset(); } </script> Error reported by IE8 debugger: Expected ')' login.xml, line 29 character 30 (which is right after the first "form.length")

    Read the article

  • Manifesto for Integrated Development Environments

    - by Hugo S Ferreira
    Have you recently take a peek at Coda, or Espresso, or Textmate? Or even Google Chrome's Developer Tools? They are well designed, intuitive, interface rich, and extensible. But Coda, Espresso or Textmate, among several, are text editors, not IDEs. On the other side, VIM and Emacs live in the last century, and Eclipse is an overbloated platform. This is more like an outcry for a decent, common infrastructure for REAL IDEs. But there's some questions attached: (i) what features are needed for such a product and (ii) what products are out there that could fullfil this need, and what are they missing. So here's my draft for a manifesto: Manifesto for Integrated Development Environments: We favor interactivity and productivity over syntax and tools. We favor inline, contextual documentation over man and html files. We favor high-definition, graphic-capable color screens over 80x25 character terminals. We favor the use of advanced input schemas over unintuitive keyboard shortcuts. We favor a common, extensible and customizable infrastructure over unmaintained chaintools. We know the difference between search&replace and refactoring. We know the difference between integrated debugging support over a terminal window. We know the difference between semantic-aware code-completion over dumb textual templates. We favor the usage of standards like (E)BNF.

    Read the article

  • PostgreSQL: return select count(*) from old_ids;

    - by Alexander Farber
    Hello, please help me with 1 more PL/pgSQL question. I have a PHP-script run as daily cronjob and deleting old records from 1 main table and few further tables referencing its "id" column: create or replace function quincytrack_clean() returns integer as $BODY$ begin create temp table old_ids (id varchar(20)) on commit drop; insert into old_ids select id from quincytrack where age(QDATETIME) > interval '30 days'; delete from hide_id where id in (select id from old_ids); delete from related_mks where id in (select id from old_ids); delete from related_cl where id in (select id from old_ids); delete from related_comment where id in (select id from old_ids); delete from quincytrack where id in (select id from old_ids); return select count(*) from old_ids; end; $BODY$ language plpgsql; And here is how I call it from the PHP script: $sth = $pg->prepare('select quincytrack_clean()'); $sth->execute(); if ($row = $sth->fetch(PDO::FETCH_ASSOC)) printf("removed %u old rows\n", $row['count']); Why do I get the following error? SQLSTATE[42601]: Syntax error: 7 ERROR: syntax error at or near "select" at character 9 QUERY: SELECT select count(*) from old_ids CONTEXT: SQL statement in PL/PgSQL function "quincytrack_clean" near line 23 Thank you! Alex

    Read the article

  • Strange problem with simple multithreading program in Java

    - by Elizabeth
    Hello, I am just starting play with multithreading programming. I would like to my program show alternately character '-' and '+' but it doesn't. My task is to use synchronized keyword. As far I have: class FunnyStringGenerator{ private char c; public FunnyStringGenerator(){ c = '-'; } public synchronized char next(){ if(c == '-'){ c = '+'; } else{ c = '-'; } return c; } } class ThreadToGenerateStr implements Runnable{ FunnyStringGenerator gen; public ThreadToGenerateStr(FunnyStringGenerator fsg){ gen = fsg; } @Override public void run() { for(int i = 0; i < 10; i++){ System.out.print(gen.next()); } } } public class Main{ public static void main(String[] args) throws IOException { FunnyStringGenerator FSG = new FunnyStringGenerator(); ExecutorService exec = Executors.newCachedThreadPool(); for(int i = 0; i < 20; i++){ exec.execute(new ThreadToGenerateStr(FSG)); } } } EDIT: I also testing Thread.sleep in run method instead for loop.

    Read the article

  • XSS attack prevention

    - by Colby77
    Hi, I'm developing a web app where users can response to blog entries. This is a security problem because they can send dangerous data that will be rendered to other users (and executed by javascript). They can't format the text they send. No "bold", no colors, no nothing. Just simple text. I came up with this regex to solve my problem: [^\\w\\s.?!()] So anything that is not a word character (a-Z, A-Z, 0-9), not a whitespace, ".", "?", "!", "(" or ")" will be replaced with an empty string. Than every quatation mark will be replaced with: "&quot". I check the data on the front end and I check it on my server. Is there any way somebody could bypass this "solution"? I'm wondering how StackOverflow does this thing? There are a lot of formatting here so they must do a good work with it.

    Read the article

  • Using JavaMail to send a mail containing Unicode characters

    - by NoozNooz42
    I'm successfully sending emails through GMail's SMTP servers using the following piece of code: Properties props = new Properties(); props.put("mail.smtp.host", "smtp.gmail.com"); props.put("mail.smtp.socketFactory.port", "465"); props.put("mail.smtp.socketFactory.class","javax.net.ssl.SSLSocketFactory"); props.put("mail.smtp.auth", "true"); props.put("mail.smtp.port", "465"); props.put("mail.smtp.ssl", "true"); props.put("mail.smtp.starttls.enable","true"); props.put("mail.smtp.timeout", "5000"); props.put("mail.smtp.connectiontimeout", "5000"); // Do NOT use Session.getDefaultInstance but Session.getInstance // See: http://forums.sun.com/thread.jspa?threadID=5301696 final Session session = Session.getInstance( props, new javax.mail.Authenticator() { protected PasswordAuthentication getPasswordAuthentication() { return new PasswordAuthentication( USER, PWD ); } }); try { final Message message = new MimeMessage(session); message.setFrom( new InternetAddress( USER ) ); message.setRecipients( Message.RecipientType.TO, InternetAddress.parse( TO ) ); message.setSubject( emailSubject ); message.setText( emailContent ); Transport.send(message); emailSent = true; } catch ( final MessagingException e ) { e.printStackTrace(); } where emailContent is a String that does contain Unicode characters (like the euro symbol). When the email arrives (in another GMail account), the euro symbol has been converted to the ASCII '?' question mark. I don't know much about emails: can email use any character encoding? What should I modify in the code above so that an encoding allowing Unicode characters is used?

    Read the article

  • List files with two dots in their names using java regular expressions

    - by Nivas
    I was trying to match files in a directory that had two dots in their name, something like theme.default.properties I thought the pattern .\\..\\.. should be the required pattern [. matches any character and \. matches a dot] but it matches both oneTwo.txt and theme.default.properties I tried the following: [resources/themes has two files oneTwo.txt and theme.default.properties] 1. public static void loadThemes() { File themeDirectory = new File("resources/themes"); if(themeDirectory.exists()) { File[] themeFiles = themeDirectory.listFiles(); for(File themeFile : themeFiles) { if(themeFile.getName().matches(".\\..\\..")); { System.out.println(themeFile.getName()); } } } } This prints nothing and the following File[] themeFiles = themeDirectory.listFiles(new FilenameFilter() { public boolean accept(File dir, String name) { return name.matches(".\\..\\.."); } }); for (File file : themeFiles) { System.out.println(file.getName()); } prints both oneTwo.txt theme.default.properties I am unable to find why these two give different results and which pattern I should be using to match two dots... Can someone help?

    Read the article

  • android: consume key press, bypassing framework processing

    - by user360024
    What I want android to do: when user presses a single key, have the view respond, but do so without opening a text area and displaying the character associated with the key that was pressed, and without requiring that the Enter key be pressed, and without requiring that the user press Esc to make the text area go away. For example, when user presses "u" (and doesn't press Enter), that means "undo the last action", so the controller and model immediately undo the last action, then the view does an invalidate() and user sees that their last action has been undone. In other words the "u" key press should be silently processed, such that the only visual result is that user's last action has been undone. I've implemented OnKeyListener and provided an onKey() method: the class: public class MyGameView extends View implements OnKeyListener{ in the constructor: //2010jun06, phj: With onKey(), helps let this View consume key presses // before the framework gets a chance to consume the key press. setOnKeyListener((View.OnKeyListener)this); the onKey() method: public boolean onKey(View v, int keyCode, KeyEvent event) { if (keyCode == KeyEvent.KEYCODE_R) { Log.d("BWA", "In onKey received keycode associated with R."); } return true; // meaning the event (key press) has been consumed, so // the framework should not handle this event. } but when user presses "u" key on the emulator keypad, a textarea is opened at the bottom of the screen, the "u" charater is displayed there, and the onKey() method doesn't execute until user presses the Enter key. Is there a way to make android do what I want? Thanks,

    Read the article

  • Supersede users need to press enter after inputting a string in python 3.0

    - by Cimex
    I've been attempting to create a simple Rock, Paper, Scissors game in python 3.0 -- very standard task for anybody learning programming. But, as I finish up to a point, I think,"wow, that'd be awesome", or,"it'd be cool to do this!" So anyways, I keep building upon the project... I've developed a menu, a single player game vs the computer, and just finished the multiplayer game. But, I've realized, that the multiplayer game isn't very effective. It just dosen't work like the analog version of the game. Currently, it'll ask for player1's input, then player2's input, compare them, and spit out the result and the current score. What I'd rather have happen is that the program asks for both players input at the same time and both players input their choice at the same time. I understand that I can easily do that by just grabbing the index of the first and second answer and compare the 2 inputs -- easy. But what I'd rather have happen is that after both players enter their one character answers at the same time (r for rock, p for paper, or s for scissors), then the program will auto enter the input. Not needing someone to press enter. The input would be dictated by the fact that 2 characters have been entered. I guess my question is: Is there any way to dictate what can be used as an input for 'enter'?

    Read the article

  • error in C++, what to do ?: could not find an match for ostream::write(long *, unsigned int)

    - by Shantanu Gupta
    I am trying to write data stored in a binary file using turbo C++. But it shows me an error could not find an match for ostream::write(long *, unsigned int) I want to write a 4 byte long data into that file. When i tries to write data using char pointer. It runs successfully. But i want to store large value i.e. eg. 2454545454 Which can be stored in long only. I dont know how to convert 1 byte into bit. I have 1 byte of data as a character. Moreover what i m trying to do is to convert 4 chars into long and store data into it. And at the other side i want to reverse this so as to retrieve how many bytes of data i have written. long *lmem; lmem=new long; *lmem=Tsize; fo.write(lmem,sizeof(long));// error occurs here delete lmem; I am implementing steganography and i have successfully stored txt file into image but trying to retrieve that file data now.

    Read the article

  • C++/CLI : Interop window is not properly configured

    - by raytaller
    Hi, I'm trying to load a WPF control in a C++/CLI application, using the HwndSource class. Here is my code : UBOOL MyWindowWrapper::Init(const HWND InParentWindowHandle) { Interop::HwndSourceParameters sourceParams( "WindowName" ); sourceParams.PositionX = 0; sourceParams.PositionY = 0; sourceParams.ParentWindow = (IntPtr)InParentWindowHandle; sourceParams.WindowStyle = (WS_VISIBLE | WS_CHILD); sourceParams.HwndSourceHook = nullptr; InteropWindow = gcnew Interop::HwndSource(sourceParams); Control = gcnew MyWPFUserControl(); InteropWindow-RootVisual = Control; InteropWindow-AddHook( gcnew Interop::HwndSourceHook( this, &MyWindowWrapper::MessageHookFunction ) ); return TRUE; } And I define a Hook function so the keyboard events are passed to the window : IntPtr MyWindowWrapper::MessageHookFunction( IntPtr HWnd, int Msg, IntPtr WParam, IntPtr LParam, bool% OutHandled ) { IntPtr Result = (IntPtr)0; OutHandled = false; if( Msg == WM_GETDLGCODE ) { OutHandled = true; // This tells Windows that we'll need keyboard events for this control Result = IntPtr( DLGC_WANTALLKEYS | DLGC_WANTCHARS | DLGC_WANTMESSAGE ); } return Result; } And here are my problems : The window title is empty (so the "WindowName" parameter is not taken in account) Only some keyboard events are transferred : space, control, arrows are ok, but I can't type any character in all the text boxes What am I doing wrong ? Thanks !

    Read the article

  • switch statement in for loop and if statement not completing

    - by user2373912
    I'm trying to find out how many of each character are in a string. I've searched around for a while and can't seem to figure out why my switch statement is stopping after the first case. function charFreq(string){ var splitUp = string.split(""); console.log(splitUp); var a; var b; var c; var v; for (var i = 0; i<splitUp.length; i++){ if (i<1){ switch (splitUp[i]){ case "a": a = 1; break; case "b": b = 1; break; case "c": c = 1; break; case "v": v = 1; break; } } else { switch (splitUp[i]){ case "a": a += 1; break; case "b": b += 1; break; case "c": c += 1; break; case "v": v += 1; break; } } } console.log("There are " + a + " A's, " + b + " B's, " + c + " C's, and " + v + " V's.") } charFreq("aaabccbbavabac"); What am I doing wrong that would make the console read: There are 6 A's, NaN B's, NaN C's, and NaN V's.

    Read the article

  • How to find which delimiter was used during string split (VB.NET)

    - by typoknig
    Hi all, lets say I have a string that I want to split based on several characters, like ".", "!", and "?". How do I figure out which one of those characters split my string so I can add that same character back on to the end of the split segments in question? Dim linePunctuation as Integer = 0 Dim myString As String = "some text. with punctuation! in it?" For i = 1 To Len(myString) If Mid$(entireFile, i, 1) = "." Then linePunctuation += 1 Next For i = 1 To Len(myString) If Mid$(entireFile, i, 1) = "!" Then linePunctuation += 1 Next For i = 1 To Len(myString) If Mid$(entireFile, i, 1) = "?" Then linePunctuation += 1 Next Dim delimiters(3) As Char delimiters(0) = "." delimiters(1) = "!" delimiters(2) = "?" currentLineSplit = myString.Split(delimiters) Dim sentenceArray(linePunctuation) As String Dim count As Integer = 0 While linePunctuation > 0 sentenceArray(count) = currentLineSplit(count)'Here I want to add what ever delimiter was used to make the split back onto the string before it is stored in the array.' count += 1 linePunctuation -= 1 End While

    Read the article

  • Fast, Unicode-capable, cross-platform programmer's text editor that shows invisibles like ZWSP?

    - by Roger_S
    Our publishing workflow includes Windows and Linux machines (there are some Macs too, but not in the critical-path workflow). Many texts include both English and Khmer and are marked-up in XML. XML Copy Editor is the best cross-platform open-source XML editor I've discovered. It utilizes the Scintilla editing component, which is generally good with Unicode but which does not enable non-printing or invisible characters like U+200B (zero-width space) and U+200C (zero-width non-joiner) to be displayed. Khmer does not separate words with a space character as Western languages do, so ZWSP is used in electronic texts to enable applications to break lines easily. Ideally I'd edit the markup and the content in a single editor, but XML awareness is less important at times than being able to display invisibles. (OpenOffice.org Writer and Microsoft Word are the only two apps I know that will display ZWSP. They are not suitable for the markup and text manipulations that need to be done to prepare manuscripts for publication, unfortunately, although I guess they're fine for authoring.) I tried out a promising editor last week, but a search-and-replace regex operation that took under a second in TextPad 4.7.3 lasted over twenty seconds. So I want to mention that speed and the ability to handle large (up to 150mb) files is also a concern. Is there a good, fast, free or not too expensive text editor, with versions on Windows and Linux and maybe mac too, Unicode-aware and capable of displaying invisibles like ZWSP? That has syntax highlighting, can handle large files and is customizable enough that I won't tear my hair out in frustration? Thanks, Roger_S

    Read the article

  • Are UTF16 (as used by for example wide-winapi functions) characters always 2 byte long?

    - by Cray
    Please clarify for me, how does UTF16 work? I am a little confused, considering these points: There is a static type in C++, WCHAR, which is 2 bytes long. (always 2 bytes long obvisouly) Most of msdn and some other documentation seem to have the assumptions that the characters are always 2 bytes long. This can just be my imagination, I can't come up with any particular examples, but it just seems that way. There are no "extra wide" functions or characters types widely used in C++ or windows, so I would assume that UTF16 is all that is ever needed. To my uncertain knowledge, unicode has a lot more characters than 65535, so they obvisouly don't have enough space in 2 bytes. UTF16 seems to be a bigger version of UTF8, and UTF8 characters can be of different lengths. So if a UTF16 character not always 2 bytes long, how long else could it be? 3 bytes? or only multiples of 2? And then for example if there is a winapi function that wants to know the size of a wide string in characters, and the string contains 2 characters which are each 4 bytes long, how is the size of that string in characters calculated? Is it 2 chars long or 4 chars long? (since it is 8 bytes long, and each WCHAR is 2 bytes)

    Read the article

  • Save Xml in an Excel cell value causes ComException

    - by mas_oz2k1
    I am trying to save an object (Class1) as string in a cell value. My issue is that from time to time I have a ComException: HRESULT: 0x8007000E (E_OUTOFMEMORY) (It is kind of random but I have not identified any particular pattern yet) when I write the value into a cell. Any ideas will be welcome For illustration purposes: Let Class1 be the class to be converted to an Xml string. (Notice that I removed the xml declaration at the start of the string to avoid having the preamble present- non printable character) <Class1 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" <ElementID HL690375</ElementID </Class1" Class1 myClass = new Class1(); this class is converted to a string s. s= ConvertObjectToXmlString(myClass); then s is assigned to a cell Range r = Application.ActiveCell; r.Value2 = s; Note: (1) If the string is too big, I limit it to 32000 chars and split the string in chunks of 32000 chars and save the chunks in multiple cells. (2) I do not to quote the string before adding to a cell. Do I need to? If so how it can be done? (3) All object contents are English. (4) C# code sample will be great but VB.net code is OK.

    Read the article

  • How can I exclude words with apostrophes when reading into a table of strings?

    - by rearden
    ifstream fin; string temp; fin.open("engldict.txt"); if(fin.is_open()) { bool apos = false; while(!fin.eof()) { getline(fin, temp, '\n'); if(temp.length() > 2 && temp.length() < 7) { for(unsigned int i = 0; i < temp.length(); i++) { if(temp.c_str()[i] == '\'') apos = true; } if(!apos) dictionary.insert(temp); } } } This code gives me a runtime error: Unhandled exception at 0x00A50606 in Word Jumble.exe: 0xC0000005: Access violation reading location 0x00000014. and throws me a break point at: size_type size() const _NOEXCEPT { // return length of sequence return (this->_Mysize); } within the xstring header. This exception is thrown no matter what character I use, so long as it is present within the words I am reading in. I am aware that it is probably a super simple fix, but I just really need another set of eyes to see it. Thanks in advance.

    Read the article

< Previous Page | 185 186 187 188 189 190 191 192 193 194 195 196  | Next Page >