Search Results

Search found 1683 results on 68 pages for 'andrew hicks'.

Page 19/68 | < Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >

• Windows 7 Wireless Network Adapter Stopped Working

  - by Andrew B Schultz

  I have a Windows 7 Ultimate machine where the wireless adapter all of a sudden started having trouble connecting to wireless networks. Whenever I go to a new place and try to connect to a wireless network, it says that the DNS server is not responding, and tells me to go unplug the router and try again. After several locations in a row telling me this, I began to realize something was wrong with my adapter, not the routers. I am no longer asked to identify the security level for any new networks (Work, Home, or Public) like I used to be (it defaults to Public now - with the park bench icon). Often, resetting the router doesn't even work. Running the Windows 7 troubleshooter doesn't give me anything better than the advice to reset the router. However, the adapter will still connect to the wireless network at my main office without any problems. Does anyone know why a wireless network adapter can get so finicky so suddenly? Thanks!

  Read the article

• Cannot load viper-mode in Emacs24

  - by Andrew-Dufresne

  Every time I try to load viper-mode in Emacs24 using M-x viper-mode, I get error Wrong type argument: symbolp, (quote 3) I have observed it happens when I try to load viper-mode for the after opening Emacs or after I have issued M-x viper-go-away So once I get this error and run the same command again, viper-mode loads successfully. When I use toggle-viper-mode to turn it off, viper-mode goes away successfully. But when I try to turn it back on using toggle-viper-mode again, I get the above stated error. I have to use viper-go-away and then M-x viper-mode twice to get it back working. How can I get rid of this error?

  Read the article

• How to define template for org-mode HTML export?

  - by Andrew-Dufresne

  I am using org-mode to generate html pages from my notes. I used Publishing Org-mode files to HTML to setup blog system. I have defined an export template. But to use it I have to add following line in top of my every org file inside my notes project. #+SETUPFILE: ~/.emacs.d/org-templates/level-0.org Is there a way to set this up in .emacs or to customize an org-mode variable so that I do not have to place this line in every file? According to org-mode manual, #+SETUPFILE is an in-buffer setting. Does this mean I cannot define it globally for all org files? These two answers on SU tell how to customize style for HTML export. But my template file contains other settings besides CSS style. So only customizing style won't do it for me.

  Read the article

• Ping and crawling not working, site still resolving

  - by Andrew Alexander

  Ok, so we're trying to figure out why the site of one of our clients isn't being crawled by Google (we've ruled out robots.txt or meta tags) When we go to the site, either IP address or domain name, the site resolves, everything works. However, Google is getting a 302 redirect (which it apparently isn't following for crawling), and when we ping the address, it times out (note, the site is still resolving in the browser throughout all of this). The site is built in ASP.Net (I assume C#) and so my thoughts were that it was an errant redirect rule, or some other sort of server side issue. We also thought that it might be due to incorrect domain pointing (but if we try to ping the IP, it doesn't work, so that sorta rules that out). We're really not sure what is causing all of these errors, or even if they have one single source. Anyone have any ideas what could be going on? Do you need any more information? To boil it down in a TL; dr: * Site resolving in browser, both IP and domain name. No problems here. * Site not being crawled by Google (gets a 302 it doesn't seem to follow) - it is not due to robots.txt or meta tags * Ping is not working for the IP address. This is very odd, because again, the IP address seems to work fine in the browser. * Our thoughts are either redirect rule issue, domain pointing issue, or possibly some errant code - or some combination of the three

  Read the article

• what does the @ symbol mean in ls -l directory listing?

  - by Andrew Arrow

  When I run ls -l on my mac I see two .yml files: -rw-r--r-- 1 aa staff 6 Apr 15 05:50 s1.yml -rw-r--r--@ 1 aa staff 362 Apr 15 05:49 s3.yml same owner, same permissions but one has a @ at the end of the permisions. The one with the @ shows up in my editor, the one without does not. So there must be some significance. How can I turn on the @ for the file without it? I selected the files in the finder and did get info and everything looks identical between the two files.

  Read the article

• How important is dual-gigabit lan for a super user's home NAS?

  - by Andrew

  Long story short: I'm building my own home server based on Ubuntu with 4 drives in RAID 10. Its primary purpose will be NAS and backup. Would I be making a terrible mistake by building a NAS Server with a single Gigabit NIC? Long story long: I know the absolute max I can get out of a single Gigabit port is 125MB/s, and I want this NAS to be able to handle up to 6 computers accessing files simultaneously, with up to two of them streaming video. With Ubuntu NIC-bonding and the performance of RAID 10, I can theoretically double my throughput and achieve 250MB/s (ok, not really, but it would be faster). The drives have an average read throughput of 83.87MB/s according to Tom's Hardware. The unit itself will be based on the Chenbro ES34069-BK-180 case. With my current hardware choices, it'll have this motherboard with a Core i3 CPU and 8GB of RAM. Overkill, I know, but this server will be doing other things as well (like transcoding video). Unfortunately, the only Mini-ITX boards I can find with dual-gigabit and 6 SATA ports are Intel Atom-based, and I need more processing power than an Atom has to offer. I would love to find a board with 6 SATA ports and two Gigabit LAN ports that supports a Core i3 CPU. So far, my search has come up empty. Thus, my dilemma. Should I hold out for such a board, go with an Atom-based solution, or stick with my current single-gigabit configuration? I know there are consumer NAS units with just one gigabit interface (probably most of them), but I think I will demand a lot more from my server than the average home user. Any advice is appreciated. Thanks.

  Read the article

• Bare minimal Chef provisioning and deployment?

  - by Andrew McCloud

  I've read the documentation on Chef twice over. I still can't wrap my head around it's concept because they skip but fundamentals and jump to complex deployments with chef-server. Using chef-solo and possibly knife, is there a simple way to provision a server and deploy? I may be wrong, but it seems like with my cookbooks prepped, this should be very simple. knife rackspace server create --flavor 1 --image 112 That provisions my server. I can optionally pass --run-list "recipe[mything]", but how do my cookbooks in ~/my_cookbooks actually get on the server? Do I have to manually transfer them? That seems counterproductive.

  Read the article

• Converting a multi-sheet per page pdf to single sheet per page

  - by Andrew Aylett

  My father-in-law usually creates his newsletters pre-'booked' -- that is, two columns with the pages in the right place such that you can print and staple the newsletter. Unfortunately, this month we're using a printer that wants an un-booked PDF -- with one page per page, in the right order. I can re-order pages easily enough, but is there any way to take a PDF which is essentially 2-up and split the pages?

  Read the article

• How do you manage large web farms?

  - by Andrew Katz

  I have a quickly growing web farm running IIS 7 (30+ servers). All servers are identical copies of each other and all servers are physical. We update the software about once a month, and in the current process, we follow the following steps: Disable server from pool on F5 load balancer. Disable HTTP Keep-alives in IIS so connections drop quickly. Change default directory of website to new folder containing new binaries. Test server Enable HTTP Keep-alives. Enable server in F5 pool. Move to server 2 Microsoft used to have Application Center which was abandoned a while ago. They have made a second attempt with the Web Farm Framework, but this adds as much QA time testing the release package as it saves in the deployment. Has anyone seen a commercial off the shelf application that is tailored for managing and deploying to large web farms? Thanks!

  Read the article

• OAS log files filling up hard drive

  - by Andrew Hampton

  We've had issues with log files for Oracle Application Server filling up the hard drive on our server. The files are in the /network/admin folder and are named server.log_XXXXX.trc and client.log_XXXXX.trc where XXXXX are 5 digits. The files are typically anywhere from 1-2MB in size but can be up to 100MB and thousands of them are created at a rate of about 5-10 per minute. Does anyone know how to disable these logs? Thanks!

  Read the article

• Programs keep waiting for external disk to spin up - how to ignore disk?

  - by Andrew J. Brehm

  Like many Mac users I have an external Firewire disk hooked up to my Mac to be used by Time Machine. This works very well, backup-wise. The problem is that very often when I use a Mac application and try to open a file, the file selection dialogue window hangs until the external disk has spun up. I never ever want to open a file on the external disk. Sometimes this happens even when I just want to save a file I already saved (i.e. type something and press meta-s). Is there anything I can do about this?

  Read the article

• multiple problems--windows 7 mbr, others

  - by Andrew

  After buying a new laptop(XPS L501X) with windows 7 preinstalled, I decided to make it dual boot with windows Vista. I now know about the issue with installing previous versions of windows, and the deletion of the MBR. Normally this wouldn't be a problem, but Microsoft no longer sends install disks with their computers, so there is no way to just re-install windows 7. If anyone can help it would be much appreciated. Data preservation is not an issue, as the laptop is new.

  Read the article

• Ubuntu 9.04 Cannot Connect to visible open wifi ap (reason 6)

  - by Andrew Bolster

  I'm travelling currently so the last network i connected successfully to was my home wpa-psk network. I hadn't tried anything until i got to my accommodation that is an open network (that I'm on now on the Win7 partition on my laptop). The network (and a similar archetypical 'linksys' open network, aswell as some protected local networks are correctly displayed in network-manager and upon selection, it happily spins around to its hearts content for a while before saying 'no chance boy'. /var/log/syslog spills out the usual combination of wpa_supplicant and kernel messages, the most interesting of are that the kernel deauthentication reason 6 response. 6 apparently means class2FrameFromNonAuthStation...Client attempted to transfer data before it was authenticated. Anyone seen anything like this? I've already tried going closer to the router to no avail. I don't remember seeing this any other time I've connected to a open AP, even if that AP is far away. (Signal strength for this AP is good, kismet says its around -57dBm, well above the threshold of -80dBm, and I've tried all the suggestions from the 'Related Questions'

  Read the article

• Using cURL through SSH tunnel or VPN

  - by Andrew

  Hello, I would like to set my CURL to use SSH tunneling for certain domains. How can I accomplish that? I can also set up VPN or SOCKS or whatever, but I need to use CURL on local machine, but use the IP of remote machine for those connections.

  Read the article

• Firefox only shows a black window over RDP

  - by Andrew Aylett

  I have a Windows 7 desktop running Firefox 4. If I remote-desktop (RDP) from another PC into my already-running session, the Firefox window turns black. Flash applications are still visible, if I'm on a tab with one, and I can apparently interact with Firefox normally, I just can't see anything in the window. I'm after an explanation, if possible, and (even better!) a workaround or fix that doesn't involve a different web browser :).

  Read the article

• Cannot install grub to RAID1 (md0)

  - by Andrew Answer

  I have a RAID1 array on my Ubuntu 12.04 LTS and my /sda HDD has been replaced several days ago. I use this commands to replace: # go to superuser sudo bash # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded" # remove broken disk from RAID mdadm /dev/md0 --fail /dev/sda1 mdadm /dev/md0 --remove /dev/sda1 # see partitions fdisk -l # shutdown computer shutdown now # physically replace old disk by new # start system again # see partitions fdisk -l # copy partitions from sdb to sda sfdisk -d /dev/sdb | sfdisk /dev/sda # recreate id for sda sfdisk --change-id /dev/sda 1 fd # add sda1 to RAID mdadm /dev/md0 --add /dev/sda1 # see RAID state mdadm -Q -D /dev/md0 # State should be "clean, degraded, recovering" # to see status you can use cat /proc/mdstat This is the my mdadm output after sync: /dev/md0: Version : 0.90 Creation Time : Wed Feb 17 16:18:25 2010 Raid Level : raid1 Array Size : 470455360 (448.66 GiB 481.75 GB) Used Dev Size : 470455360 (448.66 GiB 481.75 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Nov 1 15:19:31 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 UUID : 92e6ff4e:ed3ab4bf:fee5eb6c:d9b9cb11 Events : 0.11049560 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 After bebuilding completion "fdisk -l" says what I have not valid partition table /dev/md0. This is my fdisk -l output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057d19 Device Boot Start End Blocks Id System /dev/sda1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sda2 940910985 976768064 17928540 5 Extended /dev/sda5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/sdb: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000667ca Device Boot Start End Blocks Id System /dev/sdb1 * 63 940910984 470455461 fd Linux raid autodetect /dev/sdb2 940910985 976768064 17928540 5 Extended /dev/sdb5 940911048 976768064 17928508+ 82 Linux swap / Solaris Disk /dev/md0: 481.7 GB, 481746288640 bytes 2 heads, 4 sectors/track, 117613840 cylinders, total 940910720 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table This is my grub install output: root@answe:~# grub-install /dev/sda /usr/sbin/grub-setup: warn: Attempting to install GRUB to a disk with multiple partition labels or both partition label and filesystem. This is not supported yet.. /usr/sbin/grub-setup: error: embedding is not possible, but this is required for cross-disk install. root@answe:~# grub-install /dev/sdb Installation finished. No error reported. So 1) "update-grub" find only /sda and /sdb Linux, not /md0 2) "dpkg-reconfigure grub-pc" says "GRUB failed to install the following devices /dev/md0" I cannot load my system except from /sdb1 and /sda1, but in DEGRADED mode... Anybody can resolve this issue? I have big headache with this.

  Read the article

• TCP Server Memory management: #Connections Vs. #Requests

  - by Andrew

  Given that, there is no theoretical limit to number of concurrent TCP connections a Windows 2008 server can handle. Only thing will happen is, with each connection there will be memory consumption in server. Unfortunately, memory is not unlimited (and I want to utilize only physical memory). For example, lets say we've 2GB server memory. Now there are two extreme cases: Case 1: If we've allocated 64KB buffer for each connection (only to receive incoming request), then 32768 connections can consume all the 2GB of memory. This will not leave any memory to queue/process incoming requests from those connections. Case 2: On the other hand, lets say a single (or very few) connections continuously keeps sending request buffers (for example, video streaming from one connection to other) and server cannot process them within time, those buffers will get piled up in server and eventually will occupy most of the servers memory. And it will not leave any memory for new connection thereafter. This is the real dilemma in server design bugging me badly for last many days. If I can decide on max size of request buffer per connection and max number of requests to allow in queue per connection. Then, based on available server memory, it will then automatically set limit on max number of concurrent connections. How to decide on these limits to achieve best performance and throughput? I am just looking for perfect utilization of server resources. Are there any standard guidelines or empirical data available with someone who can share with me please.

  Read the article

• Automatically mount a remote folder on boot

  - by Andrew

  I'm trying to mount a Windows folder on my Ubuntu machine on start up. I've tried following this page here, modifying /etc/fstab and appending sshfs#my_user@remote_host:/path/to/directory <local_mount_point> fuse user 0 0 to it, but it fails; on start up, I get an error saying that the mounting failed, and I can press S to skip or M to recover manually. I also tried following this page here, appending /usr/bin/sshfs -o idmap=user my_user@remote_host:/path/to/directory <local_mount_point> to the /etc/rc.local file, but this doesn't help either; Ubuntu just boots up normally without mounting. I have Cygwin installed on my Windows machine, and I can run everything smoothly, such as sshing without passwords, and mounting it manually. I've also tried to run the modified rc.local file $ /etc/rc.local, and it works perfectly, but I just can't seem to get the folder mounted on start up. Can someone help me?

  Read the article

• Firefox address bar search like chrome extension? [closed]

  - by Andrew

  Firefox address bar search like chrome extension?

  Read the article

• Transferring an SQL Processor License to a virtual hosted environment

  - by Andrew Shepherd

  My company is currently hosting a service in-house, and we want to move to an externally hosted environment. We would then be using a virtual server. I understand that this might be spread across multiple machines, but from my perspective as a customer, this layer is abstracted away - I shouldn't know or care about the hardware that the OS is hosted on. We have a licensed edition of SQL Server 2008. This is one Processor license. Will it be a violation of the licensing agreement to use this in a virtual environment. From the reference guide here it says When licensed Per Processor With Workgroup, Web, and Standard editions, for each server to which you have assigned the required number of per processor licenses, you may run, at any one time, any number of instances of the server software in physical and virtual operating system environments on the licensed server. However, the total number of physical and virtual processors used by those operating system environments cannot exceed the number of software licenses assigned to that server For enterprise edition there is an added option: if all physical processors in a machine have been licensed, then you may run unlimited instances of SQL server 2008 in one physical and an unlimited number of virtual operating environments on that same machine. I'm having trouble getting my head around this. Would I theoretically have to get a license for every processor in this virtual environment (which is effectively impossible because I have no way of knowing how many processors there actually are)? Or can I just say that it's hosted on one "virtual" server, so that's OK?

  Read the article

• Sync desktop Mac environment to laptop

  - by Andrew Vit

  I spend the majority of my time working at my desktop Mac, which I have configured for my web development environment. My spouse has a MacBook for casual use, and I occasionally steal it back when I need to work off-site, or when travelling. The question is how to best synchronize the two so I can switch between them more readily. I've solved a few obvious things by using online services: Email is hosted on IMAP. Working files are in Dropbox. Source code is managed in git. However, the following are things I always miss when jumping on the laptop: Installed Applications (current versions) Installed libraries & utilities (/usr/local) Apache VirtualHosts & other configurations (/etc) Disk image files for VMs My current method is to connect the MacBook via Firewire target mode and rsync the /Users/me home directory, and then cherry-pick the other items I need from Applications, /etc and /usr/local. The problem with this method is that it can be very time consuming due to things like my virtual machine image files, cached emails, etc. How can I make this faster & easier? Can you recommend a solution for configuration management (so I can repeatably install & configure the same software on both), or synchronization (so I can bring the MacBook up to date nightly, over our home network)?

  Read the article

• Is it possible to download extremely large files intelligently or in parts via SSH from Linux to Windows?

  - by Andrew

  I have a ~35 GB file on a remote Linux Ubuntu server. Locally, I am running Windows XP, so I am connecting to the remote Linux server using SSH (specifically, I am using a Windows program called SSH Secure Shell Client version 3.3.2). Although my broadband internet connection is quite good, my download of the large file often fails with a Connection Lost error message. I am not sure, but I think that it fails because perhaps my internet connection goes out for a second or two every several hours. Since the file is so large, downloading it may take 4.5 to 5 hours, and perhaps the internet connection goes out for a second or two during that long time. I think this because I have successfully downloaded files of this size using the same internet connection and the same SSH software on the same computer. In other words, sometimes I get lucky and the download finishes before the internet connection drops for a second. Is there any way that I can download the file in an intelligent way -- whereby the operating system or software "knows" where it left off and can resume from the last point if a break in the internet connection occurs? Perhaps it is possible to download the file in sections? Although I do not know if I can conveniently split my file into multiple files -- I think this would be very difficult, since the file is binary and is not human-readable. As it is now, if the entire ~35 GB file download doesn't finish before the break in the connection, then I have to start the download over and overwrite the ~5-20 GB chunk that was downloaded locally so far. Do you have any advice? Thanks.

  Read the article

• Transferring NMap scans between machines

  - by Andrew Bolster

  Anyone know if its possible to halt a running nmap scan and for another scan on a different machine to 'pick up where it left off'?

  Read the article

• How do I set up different configurations on an Ubuntu laptop based on different physical locations?

  - by Andrew Larned

  I'm looking for a way to have a couple (or three) multiple configurations set up on my laptop, and easily switch between them. To be more specific, when my laptop is at work, it's plugged into a second monitor, and has a specific set of networks configurations. At home, the second monitor is gone, the network configurations are different. At a public wireless point there are other configurations to set, etc. I know I can go into my preferences and turn on/turn off the monitor, and mess with the networking preferences, and so on, but I'm looking for a way to change a bunch of preferences all at once, and if it's possible to do that automatically, maybe based on the wireless APs in the vicinity, that would be even better.

  Read the article

• Will Bitlocker make it impossible to read my files from my dual booting Ubuntu OS?

  - by Andrew Arnott

  When I activate BitLocker, I imagine that will make it impossible to read any files on my Windows partition from my Ubuntu installation. Is that correct? Any way to not encrypt certain directories so I can access them from Ubuntu?

  Read the article

< Previous Page | 15 16 17 18 19 20 21 22 23 24 25 26  | Next Page >